Professional Documents
Culture Documents
Data:
Building size : 24m x 24m (6 Bays each bay 4m )
Height : 21m (7 Bays each bay 3.0m)
Column size: 0.40m x 0.40m
Beam size : 0.30m x 0.30m
Concrete M30
24.00
4.00
Steel Fe 415
4.00
24.00
PLAN
3.00
21.00
4.00
4.00
4.00
4.00
4.00
ELEVATION
1.Creation of Geometry:
New Project Space File: Rayleigh frequency Method Unit :
Length=metre : Force=KN Next Open structure wizard Finish.
Change to Frame Models from Truss models Select Bay Frame and
double click on it.
Length (Along X Direction)= 24.0m. No. of bays (Span) =6 Click
Bay No.1 =4.0m Bay No.2=4.0m Bay No.3=4.0m; Bay No.4=4.0m
Bay No.5=4.0m; Bay No.6=4m.
Height (Along Y Direction) =3.0m. No. of bays (Span) =1 Click
Bay No.1 =3.0m
Width (Along Z Direction) =24.0m. No. of bays (Span) =3 Click
Bay No.1 =4.0 ; Bay No.2=4.0 ; Bay No.3=4.0; Bay No.4=4.0m;
Bay No.5=4.0m; Bay No.6=4.0m Apply
Transfer model Click yes OK.
2. Property:
Click General Property Define Rectangular YD=0.40m ZD=0.40m
(column) Add. YD=0.30m ZD=0.30m (Beam) AddClose.
Front view Select all columns by windowing and high light YD=0.40
ZD=0.40 Assign to selected beam Assign Yes.
Highlight YD=0.30 ZD=0.30 and select all beams by windowing Assign to
selected beam Assign Yes.
Select the entire structure. Go to Geometry Translational repeat Y
direction. No. of steps=6 Default spacing=3m Ok.
3. Supports :
Front view Click support Create Fixed Add. Highlight support 2.
Select node cursor and select bottom most nodes by windowing
Assign to selected nodes Assign Yes Close.
De select the nodes and change to beam cursor.
4.Loading :
Click Loads & Definitions Click Load case details Add.
Primary No.1 Loading Type: None
Title: Load in X direction Add.
Number 2 Loading type: none
Title: load in Z direction Add Close.
Click Load case 1 Add.
Self weight
Pressure= 6 KN/m2
Global X
Pressure= 3KN/m2
Global Z