Professional Documents
Culture Documents
8800
Pump
RODI P/N: EZ-BP230T-INTL
Flow Range: Open Flow = 1.90-2.60 LPM
At 80 PSI = 1.00-1.40 LPM
3.38
3.60
SPECIFICATIONS:
2.12
n MOTOR:
TYPE:
LEADS:
TEMP. LIMITS:
.23
DUTY CYCLE:
n PUMP DESIGN:
n TYPICAL APPLICATION:
n MATERIALS:
HOUSINGS:
VALVES:
DIAPHRAGM:
FASTENERS:
Nylon
EPDM
Santoprene
Stainless Steel
n LIQUID TEMPERATURE:
n PUMP CERTIFICATIONS:
NSF Standard 58
.45
2.75
2.87
7.28
2.36
2.25
n PRIMING CAPABILITIES:
PRIME
(FEET)
88X0
88X1
88X2
3.18
4.00
n FITTINGS:
TYPE
3/8" COMPRESSION
3/8" COMPRESSION
3/8" STEM
SHAPE
KIT NO.
STRAIGHT
25-145
CONNECTS TO
3/8" TUBING
ELBOW
25-146
3/8" TUBING
STRAIGHT
25-144
WEIGHT: 6 lbs.
DOCUMENT:
ISSUED:
REVISED:
DS88XX-2X03-A424
10/20/99
12/9/99
88X0
CURRENT
FLOW
(LPM)
(AMPS)
PUMPHEAD MODEL
88X1
FLOW
CURRENT
(LPM)
(AMPS)
RECOMMENDED
BY-PASS PRESSURE
88X2
FLOW CURRENT
PSI
CODE
(LPM)
(AMPS)
1.00
1.20
1.20
1.40
1.40
1.65
1.10
1.20
1.14
1.06
1.30
1.40
1.29
1.19
1.50
1.60
1.55
1.43
1.30
1.40
0.98
0.90
1.50
1.55
1.10
0.99
1.80
1.90
1.50
1.55
0.82
0.72
1.70
1.85
0.89
0.77
1.80
1.90
0.60
0.53
2.00
2.10
0.64
0.58
110
100
J
I
1.29
1.17
90
80
70
H
G
F
2.00
2.20
1.02
0.91
60
50
E
D
2.50
2.60
0.75
0.70
40
30
B
A
PERFORMANCE MEASURED WITH FLOODED INLET (0 PSI), 70F (21C) AMBIENT AND WATER TEMPERATURE, AND VOLTAGE CONTROLLED AT 24 VAC. POSITIVE INLET PRESSURE WILL INCREASE THE DISCHARGE PRESSURE BY A SIMILAR
AMOUNT, FOR A GIVEN FLOW. MAXIMUM INLET PRESSURE IS 60 PSI.
SHADED AREA DENOTES CONTINUOUS OPERATION CAPABILITY AT DESIGNATED PRESSURE AND CURRENT.
HEAT RISE
200
RECOMMENDED
SHUT-OFF
TEMPERATURE
180
160
140
1.65 AMPS
120
100
80
60
0
10
20
30
40
50
60
70
80
90
100
110
120
TIME (MINUTES)
All of the pump models in the Performance Data and Heat Rise charts are in the shaded area, meaning they are capable of
sustaining continual running, at any of the above listed pressures, without shutting down to allow the motor to cool. To
conserve wearing parts, however, the pump should only operate as needed.
Care should be exercised in selecting the proper transformer for this 24 VAC motor. The largest wall mount transformer
is only rated to .80 amps. The table top transformer is rated to 2.00 amps. By-Pass pressures must
also be considered when selecting a suitable transformer, in the event the pump is allowed to reach the preset by-pass pressure for sustained periods.
ALL PERFORMANCE AND HEAT RISE FIGURES ARE APPROXIMATE. ACTUAL VALUES WILL VARY WITH AMBIENT CONDITIONS.