Professional Documents
Culture Documents
00
Method of Procedure
SC520.1 LSMR Procedures for SCFT
Date of Release:31-Oct-2014
1|P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
COPYRIGHT
This manual is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright.
No information contained herein may be copied, translated, transcribed or duplicated for any commercial
purposes or disclosed to the third partyin any form without the prior written consent of SAMSUNG
Electronics Co., Ltd.
TRADEMARKS
Product names mentioned in this manual may be trademarks and/or registered trademarks of their
respective companies.
2|P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
Document History
Edition
Date of Issue
Author
Remarks
00
31-Oct-2014
Gaurav Gupta
New Document
3|P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
Troubleshooting flow
Table of Contents
Part I
(Pre-Checks During SCFT)
1.
2.
Physical Cell ID
3.
MIMO Configuration
4.
5.
Alarm List
6.
7.
SON ANR
8.
Part-II
(Checks During SCFT)
1.
2.
eNB
3.
page 4 of 32
Part I
(Pre-Checks During SCFT)
1.
2.
Physical Cell ID
3.
MIMO Configuration
4.
5.
Alarm List
6.
7.
SON ANR
8.
5|P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
1)
1) How to check RET values: Write RTRV-RET-INF in command line and then click on Execute
option.
2)
Note:
b)
In Response Window :
Connect_Bord_ID represent L9CA card; 0 means first L9CA card just above the UAMA Card .
Connect_Port_ID (0,1,2) represents the port sector on the Card
6|P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
= 0
Connect_POR=0/1/2
ALD_ID
ANT_ID=1
Remember:
7|P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
fill
following
1) How to check PCI values: Write RTRV-CELL-IDLE in command line and then click on Execute
option.
Note:
8|P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
Remember :
fill
following
Cell_Num =0
and
Cell_Num =1
and
Cell_Num =2
and
Note:Cell_Num = 0,1,2
represents
9|P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
sector 1,2,3
1) How to check MIMO Configuration: Write RTRV-DL-SCHED in command line and then click on
Execute option.
Note:
10 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
fill
Cell_Num =0
and
and
Cell_Num =1
and
and
Cell_Num =2
and
11 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
and
ID
1) How to check TAC ID : Write RTRV-DL-SCHED in command line and then click on Execute
option.
Note:
12 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
fill
following values
Cell_NUM = 0/1/2
Cell_Size = Very Small,Large etc.
Tracking_Area = Put required TAC
Note:
In case if we are changing TAC the same should be changed in MME also.
13 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
Note:
14 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
6) RRH
Lock/UnLock
Select eNB SAP ID as mentioned below and right click on mouse a table will open in which a option
called Administrative State will appear .
Click on Locked in order to off the RRH and Unlocked in order to On the RRH as mentioned below.
15 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
7) SON ANR
1) How to check SON ANR : Write RTRV-SONFN-CELL in command line and then click on
Execute option.
Note:
16 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
2) How to Enable SON ANR : Write CHG-SONFN-CELL in command line and drfine following
parametrs before
CELL_NUM = 0/1/2
ANR_ENABLE = Auto
17 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
8) EARFCN
1) How to check EARFCN for UL & DL : Write RTRV-EUTRA-FA in command line and then click
on Execute option.
Note:
18 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
2.1) How to Change EARFCN for UL & DL : Write following command CHG-EUTRA-F
A in command line define following parameters before execute the command.
a) CELL_NUM = 0/1/2
b) FA_INDEX = 0 (always)
c) EARFCN_UL & EARFCN_DL : put decided value
Note: after execute 2.1 go to 2.2
19 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
2.1) How to Change EARFCN for UL & DL: Write following command CHG-CELL-IDLE
in command line define following parameters before execute the command.
a) CELL_NUM = 0/1/2
b) EARFCN_DL = Put decided value
c)
20 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
Part-II
(Checks During SCFT)
1.
2.
3.
21 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
22 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
b)
23 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
&SM
a)
24 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
b)
25 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
&
2) OCNS Testing
1) OCNS Loading : Write Test-OCNS in command line and define following parameters
a) SUB_CELL_NUM = 0/2/4
b) Modulation
c)
26 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
Cell Load
2) Terminating OCNS Testing :Write Term-Test in command line and define INVOCATION_ID
mentioned below.
27 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
Step-1:
Select Configuration
28 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
Step-2:
b)
c)
a)
29 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
Step-3: Let us consider we select sector-0 then we can see that the remaining sectors are appearing
as aneighbour of sector-0 in Target_Cell_Num
30 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
31 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.
32 | P a g e
NEO eNB Part (R4G Project)
SAMSUNG Electronics Co., Ltd.