Professional Documents
Culture Documents
www.chinajiurong.com/www.jiurongwheel.com
0/2
Specification:
1. Machine Type: RFT-2
2. Design standard:
In accordance with ISOSAEVIAJISand TV standards
3. Machine application:
For Passenger Car Wheel Dynamic Radial Fatigue Test
4. Technical parameters:
Structure: vertical machine frame
Test Position: 2
Rated Power: 50 kW
Wheel Diameter: 1226
Wheel Width: 412
Radial Load: Max.30 kNaccuracy: 1%P.S.
Loading Means: Hydraulic servo in closed-loop
Test Speed: max.140km/haccuracy: 1%
Drum Diameter Width1707.6400mm
Drum Radial Run-out<0.20mm
DimensionApprox. L6500mmW1750mmH3050mm
Total Weight: max.12t
www.chinajiurong.com/www.jiurongwheel.com
1/2
Specification:
1. Machine Type: RFT-2
2. Design standard:
In accordance with ISOSAEVIAJIS and TV standards
3. Machine application:
For Passenger car Wheel Dynamic Radial Fatigue Test
4. Technical parameters:
Structurevertical machine frame
Test Position2
Rated Power50 kW
Wheel Diameter1226
Wheel Width412
Radial Loadmax.30 kNaccuracy: 1%P.S.
Loading MeansMechanical servo in closed-loop
Test Speedmax.140km/haccuracy: 1%
Drum Diameter Width1707.6400mm
Drum Radial Run-out< 0.20mm
DimensionApprox. L6900mmW1750mmH3050mm
Total WeightApprox. 10t
www.chinajiurong.com/www.jiurongwheel.com
2/2
Specification:
www.chinajiurong.com/www.jiurongwheel.com
3/2
Specification:
1. Machine Type: RFT-5
2. Design standard as per:
In accordance with ISOSAEVIAJIS
and TUV standards
3. Machine application:
For Truck and Bus Wheel Radial Fatigue Test
4. Technical parameters:
Structurevertical machine frame
Test Position2
Rated Power150 kW
Wheel Diameter1224.5
Wheel Width< 12
Radial LoadMax.100 kNaccuracy: 1%P.S.
Loading MeansHydraulic servo in closed-loop
Test Speed20140km/haccuracy: 0~+2km/h
Drum Diameter Width1707.6500mm
Drum Radial Run-out< 0.20mm
DimensionApprox. L7800mmW2000mmH3400mm
Total WeightApprox.18t
www.chinajiurong.com/www.jiurongwheel.com
4/2
Specification:
1. Machine Type: CFT-2
2. Design standard:
In accordance with ISOSAEJISVIAand TV standards.
3. Machine application:
For Passenger Car Wheel Dynamic Cornering
Fatigue Test
4. Technical parameters:
StructureWheel rotates under the influence of a
stationary bending moment.
Rated power16 kW
Wheel diameter12~18,
Wheel width3.5~10
Bending moment1~10kN.maccuracy: 1%
Rotation speedMax. 600rpmaccuracy: 1%
Speed regulation modeDC stepless drive
Load displacement0~+30mmaccuracy: 0.05mm
Loading meansPrecise ball-screw in closed-loop control
DimensionsApprox.L2200mmW2250mmH1700mm
Total weightApprox.3.5t
www.chinajiurong.com/www.jiurongwheel.com
5/2
Specification:
1. Machine Type: CFT-3
2. Design standard:
In accordance with ISO, SAE, JIS, VIA, TV standards
3. Machine application:
For Passenger Car Wheel Dynamic Cornering
Fatigue Test
4. Technical Parameters:
Structurestationary wheel is subjected to a rotating
bending moment.
Rated power5.5 kW
Wheel diameter12~26
Wheel width4~12
Test rotation speed6002400rpm, accuracy: 1
stepless variable frequency drive
X-Y bending moment110 kNm, accuracy: 1
Loading meansLoading in closed-loop
Measuring shaft deflection values accurate within 2
Sampling points400 points a cycle
Speed control modeAC closed-loop VFD
Automic alarm and protection syetem
DimensionsApprox.L1400mmW1060mmH1300mm
Total weightApprox.2t
www.chinajiurong.com/www.jiurongwheel.com
6/2
Specification:
1. Machine Type: CFT-4
2. Design standard:
In accordance with ISOSAEJISVIATV standards
3. Machine application:
For Truck and Bus Wheel Dynamic Cornering
Fatigue Test
4. Technical parameters:
StructureWheel rotates under the influence of a
stationary bending moment.
Rated power23 kW
Wheel diameter16~24.5,
Wheel width6~15
Bending moment5~ 50kN.m, accuracy: 1%
Rotation speedMax.500rpm, accuracy: 1%
Speed regulation modeDC stepless drive
Load displacement0~+30mm, accuracy 0.05mm
Loading meansPrecise ball-screw in closed-loop control
DimensionsApprox.L2500mmW2300mmH3000mm
Total weightApprox.5t
www.chinajiurong.com/www.jiurongwheel.com
7/2
Specification:
1. Machine Type: CFT-5
2. Standard compliance:
In accordance with ISOSAEJISVIA and TV standards
3. Machine application:
For Truck and Bus Wheel Dynamic Cornering
Fatigue Test Test
4. Technical parameters:
Structurestationary wheel is subjected to a rotating
bending moment.
Rated power10 kW
Wheel diameter16~24.5
Wheel width4~13
Loading arm length1000mm
Bending momentMax.50kN.maccuracy: 1
Load rotation speed800~1100rpmaccuracy: 1
Speed regulation modeAC closed-loop VFD
DimensionsApprox.L1700mmW1350mmH1600mm
Total weightApprox.4t
www.chinajiurong.com/www.jiurongwheel.com
8/2
Specification:
www.chinajiurong.com/www.jiurongwheel.com
9/2
Specification:
1. Machine Type: ITM-3
2. Design standard:
In accordance with JIS and VIA standards.
3. Machine application:
For Passenger Car Wheel Lateral Impact Test
4. Technical parameters:
StructureThe wheel shall be mounted with its axis
at an angle of 30or 90 to the vertical.
Rated power2.5 kW
www.chinajiurong.com/www.jiurongwheel.com
Wheel diameter12~26
Wheel width4~12
Main striker mass910 kg 18 kg
Accessory mass100 kg 4.5 kg
Resultant coefficient of elasticity0.98~1.3kN/mm
Striker dropping heightMax.400mm above the highest
part of the rim flange.
The striker facewidth152 mm length 380 mm
DimensionsApprox.L1600mmW1500mmH3100mm
Total weightApprox.5 t
10/2
2. Design standard:
In accordance with ISOSAEJISVIATV
3. Machine application:
For Passenger Car Wheel Lateral Impact Test
4. Technical parameters:
Rated power2.5 kW
Wheel diameter12~26
Wheel width4~12
Striker mass adjustingAutomatic setting
StructureThe wheel shall be mounted with its axis
at an angle of 13 1 to the vertical.
Striker mass350 kg ~1200 kg
Striker dropping height230 2mm above the
highest part of the rim flange.
The striker facewidth125 mm length 375 mm
Rubber mountTypical Values
Hardness 50 shore
Diameter: 50mm
Uncompressed Height: 27mm
StructureThe wheel shall be mounted with its axis
at an angle of 30 to the vertical.
Main striker mass910 kg 18 kg
Accessory mass100 kg 4.5 kg
Resultant coefficient of elasticity0.98~1.3kN/mm
Striker dropping heightMax.400mm above the
highest part of the rim flange.
The striker facewidth152 mmlength 380 mm
DimensionsApprox.L1600mmW1500mmH3100mm
Total weightApprox.5 t
www.chinajiurong.com/www.jiurongwheel.com
11/2
Specification:
1. Machine Type: ROT-1
2. Design standard:
In accordance with ISOEUWA standards.
3. Machine application:
For detection of first harmonic in RRD and LRD of PC wheels
4. Technical parameters:
StructureHorizontal machine frame
Rated Power5.0 kW
Wheel Diameter13 ~ 18
Wheel Width3.5 ~ 8
Radial Load0mm ~ +80mm
Disc offset0 ~ 80mm
Test rhythm4 ~ 6pcs/min
Locating meanswith hub hole and attachment face as reference
Detection meanslaser non-contact measurement,
not affected by color variation
DimensionApprox. L5200mmW2300mmH2600mm
Total WeightApprox. 6t
www.chinajiurong.com/www.jiurongwheel.com
12/2
Specification:
1. Machine Type : ROT-2
Wheel Diameter12 17
2. Design Standard:
Wheel Width 4 7
Compressed Air0.40.6MPa
www.chinajiurong.com
www.jiurongwheel.com
13/2
Specification:
1. Machine Type : ROT-3
Wheel Diameter16 25
2. Design Standard:
Wheel Width5 14
www.chinajiurong.com
www.jiurongwheel.com
14/2
Specification:
1. Machine Type : WSSM-200
Piston Stroke150mm
2. Design Standard:
:
In accordance with ISO standard.
3. Machine Application:
4. Technical Parameters:
Machine StructureVertical Machine
Max.Force Value2000kNAccuracy1%R.O
www.chinajiurong.com
www.jiurongwheel.com
15/2
Specification:
4. Technical Parameters:
2. Design Standard:
:
In accordance with SAE standard
3. Machine Application:
Used for measuring the axial strength of
nut seat of wheels.
www.chinajiurong.com
www.jiurongwheel.com
4~12
Wheel Offset
0~165mm
Applying Load
Max.66 kN
16/2