You are on page 1of 303

ZXWN MSCS

MSC Server

Data Configuration Guide(MGCF)


Version 3.09.21

ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: (86) 755 26771900
Fax: (86) 755 26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn

LEGAL INFORMATION
Copyright 2010 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of
this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION
or of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the
information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject
matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee,
the user of this document shall not acquire any license to the subject matter herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.

Revision History
Revision No.

Revision Date

Revision Reason

R1.0

Feb. 28, 2010

First edition

Serial Number: SJ-20100211152857-007

Contents

About This Manual............................................. I


Declaration of RoHS Compliance ....................... I
Data Configuration Overview.............................1
MGCF Introduction.......................................................... 1
Overall Flow of MGCF Data Configuration ........................... 2
Basic Operations of the OMM System ................................ 4
Logging in the OMM Client ........................................... 4
Entering the MML Terminal........................................... 7
Operations on the MML Terminal ................................... 8
Synchronizing Data....................................................10

Local Office Data Configuration ....................... 13


Overview......................................................................14
Local Exchange Configuration ..........................................15
Overview..................................................................15
Creating an Exchange ................................................15
Setting Province and City Information of the
Bureau .............................................................17
Physical Configuration ....................................................18
Overview..................................................................18
Creating a Rack.........................................................19
Creating a Shelf ........................................................20
Creating the UIM Unit ................................................21
Creating a Module .....................................................23
Creating other Units...................................................25
Creating a CHUB Unit ........................................26
Creating a CLKG Unit.........................................27
Creating an SIPI Unit.........................................29
Creating a USI Unit ...........................................30
Creating an SPB Unit .........................................32
Creating Background Server Node ...............................33
Capacity Configuration ...................................................34

Confidential and Proprietary Information of ZTE CORPORATION

ZXWN MSCS Data Configuration Guide(MGCF)

Overview..................................................................34
Configuring the MGCF Office Capacity...........................34
Configuring Service Data Area .....................................37
Version Loading.............................................................39
Overview..................................................................40
Creating Version File Directory ....................................41
Creating OMP Boot Files .............................................44
Configuring OMP Running Parameters via Serial
Port .................................................................47
Configuring OMP Global Data ......................................58
Synchronizing All Tables .............................................59
Loading Version Files..................................................62
Creating MGCF Tones in Batches ......................................65
Office Information Configuration ......................................67
Overview..................................................................67
Creating Local Office Signaling Point.............................67
Creating Local Office Configuration...............................70

Resource Configuration ................................... 73


Resource Planning .........................................................73
Configuring Resource Attributes.......................................73

MGCF-IM-MGW Interconnection Data


Configuration .................................................. 79
Overview......................................................................79
Interface IP Address Configuration ...................................81
Overview..................................................................81
Creating a Loopback Interface .....................................82
Creating an SIPI Interface Address ..............................83
Creating a Virtual Interface Address .............................85
BFD Configuration (Optional) ..........................................87
Overview..................................................................87
Creating BFD Authentication .......................................87
Creating a BFD Session ..............................................88
Creating a Static Route ..................................................90
Adjacent Office and Topology Configuration .......................92
Overview..................................................................92
Creating an IM-MGW Adjacent Office............................92
Creating an MGW Voice CODEC Template ......................97
Creating a Topology Node ...........................................99
Creating Inter-MGW Bear Mode ................................. 103
SIGTRAN Configuration ................................................ 106

II

Confidential and Proprietary Information of ZTE CORPORATION

Overview................................................................ 106
SCTP Planning......................................................... 108
Creating an SCTP .................................................... 108
Creating an ASP ...................................................... 111
Creating an AS ........................................................ 113
Creating an M3UA Static Route .................................. 116
Creating the SIO Locate AS....................................... 117
H.248 Configuration..................................................... 119
Overview................................................................ 119
Creating MGC Static Data ......................................... 121
Creating MGW Static Data Template ........................... 122
Creating MGW Static Data ........................................ 124
Creating a TID Analyzer ........................................... 126
Creating a TID Analysis Entrance ............................... 127

MGCF-SIP Office Interconnection Data


Configuration ................................................ 129
Overview.................................................................... 129
SIPCC Data Configuration ............................................. 130
Overview................................................................ 130
Creating a SIP Adjacent Office................................... 130
Creating SIP Office Direction ..................................... 135
Creating SIP Adjacent Office Topology Node ................ 136
SIP Protocol Stack Configuration.................................... 141
Overview................................................................ 141
Creating an IP Link .................................................. 142
Setting the Capacity for a SIP Module......................... 144
Creating a Domain where the MGCF Belongs ............... 145
Creating a MGCF Host .............................................. 146
Creating Route Selector............................................ 147
Creating Service Group ............................................ 148
Creating an Adjacent Host ........................................ 149
Creating UDP Bear ................................................... 151
Creating a SIP Signaling Link .................................... 153
Creating a SIP Signaling Route .................................. 154
Creating a SIP signaling Route Set ............................. 155
Creating IP Distribution Policy ................................... 156
Creating URI Analysis............................................... 158
Creating an RTP Trunk Group ........................................ 160

Confidential and Proprietary Information of ZTE CORPORATION

III

ZXWN MSCS Data Configuration Guide(MGCF)

MGCF-Other-Exchange Interconnection Data


Configuration ................................................ 165
Networking Mode......................................................... 165
Office Interconnection in IP Domain ............................... 166
Overview................................................................ 166
Direct-Associated Office Configuration in IP
Domain .......................................................... 167
Overview ....................................................... 167
Creating an Adjacent Office .............................. 168
Creating an MSCS Topological Node ................... 172
M3UA-Transferred Office Configuration ....................... 175
M2UA-Transferred Office Configuration ....................... 177
Overview ....................................................... 177
Creating an M2UA IP Link................................. 179
TDM Office Interconnection ........................................... 181
Overview................................................................ 181
Creating a Signaling Link Set .................................... 183
Creating an SPB-Accessed Signaling Link .................... 185
Creating a Signaling Route........................................ 188
Creating a Signaling Office........................................ 190

Basic Service Data Configuration................... 193


Overview.................................................................... 193
Number Analysis Configuration ...................................... 193
Overview................................................................ 198
Creating Number Analysis Entrance............................ 198
Creating Number Analysis Selector ............................ 201
Setting the Template of Number Analysis Selector of
the Current Office ............................................ 203
Creating Templet of Number Analysis Selector
(Optional)....................................................... 206
Creating Called Number Analysis ............................... 211
Trunk Data Configuration .............................................. 235
Overview................................................................ 235
Creating a DT Trunk Group........................................ 236
Creating an ATM Trunk Group .................................... 243
Creating RTP Trunk Group......................................... 250
Creating PCM .......................................................... 254
Configure a PCM System between MGWs .................... 256
Route Data Configuration.............................................. 258
Overview................................................................ 258

IV

Confidential and Proprietary Information of ZTE CORPORATION

Creating a Route ..................................................... 259


Creating a Route Set................................................ 260
Creating an Outgoing Route Chain ............................. 262

Configuration Instance.................................. 265


Overview.................................................................... 265
Local Office Data Configuration...................................... 266
Local Exchange Configuration ................................... 267
Physical Configuration .............................................. 267
Capacity Configuration ............................................. 268
Version Loading....................................................... 269
Office Data Configuration.......................................... 269
Resource Attribute Configuration ................................... 270
Adjacent IM-MGW Office Interconnection Data
Configuration ...................................................... 271
Adjacent SCSCF Office Interconnection Data
Configuration ...................................................... 274
Basic Service Data Configuration ................................... 276
Call Data Configuration............................................. 276
SIP Service Data Configuration .................................. 277
Data Synchronization ................................................... 277
MGCF-IM-MGW Interconnection Debugging
Procedure........................................................... 277
Checking the IM-MGW Office Status ........................... 278
Checking the Physical Connection .............................. 279
Debugging the SCTP ................................................ 279
Debugging the M3UA ............................................... 279
Confirming the Working Status of the IM-MGW ............ 280
H.248/SCTP Problem Location Method ........................ 281
M3UA Problem Location Method................................. 281

Figure............................................................ 283
Table ............................................................. 285
Index ............................................................ 289

Confidential and Proprietary Information of ZTE CORPORATION

ZXWN MSCS Data Configuration Guide(MGCF)

This page is intentionally blank.

VI

Confidential and Proprietary Information of ZTE CORPORATION

About This Manual


Purpose

At first, thank you for choosing ZXWN wireless core network system of ZTE Corporation!
ZXWN system is the 3G mobile communication system developed
based on the UMTS technology. ZXWN system boasts powerful
service processing capability in both CS domain and PS domain,
providing more abundant service contents. Comparing with the
GSM, ZXWN provides telecommunication services in wider range,
capable of transmitting sound, data, graphics and other multi-media services. In addition, ZXWN has higher speed and resource utilization rate. ZXWN wireless core network system supports both
2G and 3G subscriber access, and provides various services related with the 3G core network.
The ZXWN MSCS system is designed for the UMTS system at the
core network control level. It supports the GSM core network,
UMTS protocols in the R99/R4/R5 stage and relevant functions at
the same time, and provides the carriers with an overall solution
to the evolution from the GSM core network to the 3GPP R99 and
then to the 3GPP R5.
The ZXWN MSCS system completes the functions of the Mobile
Switching Center Server and the Visitor Location Register (VLR)
together, and provides the Service Switching Point (SSP) functions
of intelligent calls. The ZXWN MSCS system supports the MGCF
function, and the coexistence of the MGCF and GMSCS. It also can
smoothly upgrade to the MGCF.
This purpose of this manual is to let the carrier master the data
configuration method of MGCF.

Intended
Audience

This manual is intended for engineers and technicians who have


mastered the communication principle of the mobile network.

Prerequisite Skill
and Knowledge

To use this document effectively, users should have a general understanding of wireless telecommunications technology. Familiarity with the following is helpful:

What Is in This
Manual

MSCS system and its various components

This manual contains the following chapters:


Chapter

Summary

Chapter 1, Data Configuration


Overview

Describes the overall flow of the


MGCF data configuration and basic
operations of the background
network management (OMM)
system

Chapter 2, Local Office Data


Configuration

Describes the physical


configuration, capacity
configuration, version configuration,
and office information configuration
of MGCF

Confidential and Proprietary Information of ZTE CORPORATION

ZXWN MSCS Data Configuration Guide(MGCF)

FCC Compliance
Statement

Chapter

Summary

Chapter 3, Resource
Configuration

Describes MGCF resource planning


and attribute configuration

Chapter 4, MGCF-IM-MGW
Interconnection Data
Configuration

Describes the signaling interworking


configuration between MGCF and
IM-MGW

Chapter 5, MGCF-SIP
Office Interconnection Data
Configuration

Describes the signaling interworking


configuration between MGCF and
SIP office

Chapter 6, MGCF-OtherExchange Interconnection Data


Configuration

Describes the signaling interworking


configuration between MGCF and
other exchanges at the network
side

Chapter 7, Basic Service Data


Configuration

Describes the basic data


configuration related with the
call service

Chapter 8, Configuration
Instance

Sets MGCF trial office as an example


to describe the data configuration of
the local office and the peer office

This device complies with part 15 of the FCC Rules. Operation is


subject to the following two conditions.
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.

Conventions

ZTE documents employ the following typographical conventions.


Typeface

Meaning

Italics

References to other Manuals and documents.

Quotes

Links on screens.

Bold

Menus, menu options, function names, input fields,


radio button names, check boxes, drop-down lists,
dialog box names, window names.

CAPS

Keys on the keyboard and buttons on screens and


company name.
Note: Provides additional information about a certain
topic.
Checkpoint: Indicates that a particular step needs to
be checked before proceeding further.
Tip: Indicates a suggestion or hint to make things
easier or more productive for the reader.

II

Confidential and Proprietary Information of ZTE CORPORATION

About This Manual

Mouse operation conventions are listed as follows:


Typeface

Meaning

Click

Refers to clicking the primary mouse button (usually the


left mouse button) once.

Doubleclick

Refers to quickly clicking the primary mouse button


(usually the left mouse button) twice.

Right-click

Refers to clicking the secondary mouse button (usually


the right mouse button) once.

Confidential and Proprietary Information of ZTE CORPORATION

III

ZXWN MSCS Data Configuration Guide(MGCF)

This page is intentionally blank.

IV

Confidential and Proprietary Information of ZTE CORPORATION

Declaration of RoHS
Compliance
To minimize the environmental impact and take more responsibility
to the earth we live, this document shall serve as formal declaration that ZXWN MGCF manufactured by ZTE CORPORATION are in
compliance with the Directive 2002/95/EC of the European Parliament - RoHS (Restriction of Hazardous Substances) with respect
to the following substances:

Lead (Pb)

Mercury (Hg)

Cadmium (Cd)

Hexavalent Chromium (Cr (VI))

PolyBrominated Biphenyls (PBBs)

PolyBrominated Diphenyl Ethers (PBDEs)

The ZXWN MGCF manufactured by ZTE CORPORATION meet


the requirements of EU 2002/95/EC; however, some assemblies
are customized to client specifications. Addition of specialized,
customer-specified materials or processes which do not meet the
requirements of EU 2002/95/EC may negate RoHS compliance of the
assembly. To guarantee compliance of the assembly, the need for
compliant product must be communicated to ZTE CORPORATION in
written form. This declaration is issued based on our current level
of knowledge. Since conditions of use are outside our control, ZTE
CORPORATION makes no warranties, express or implied, and assumes
no liability in connection with the use of this information.

Confidential and Proprietary Information of ZTE CORPORATION

ZXWN MSCS Data Configuration Guide(MGCF)

This page is intentionally blank.

II

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

Data Configuration
Overview
Table of Contents
MGCF Introduction.............................................................. 1
Overall Flow of MGCF Data Configuration ............................... 2
Basic Operations of the OMM System .................................... 4

MGCF Introduction
Networking

ZXWN MSCS can serve as a MGCF, composing an IMS system together with NEs of ZXUN. The MGCF can be combined with the
GMSCS, or separately set. The position of the MGCF in the IMS
network is shown in Figure 1.
FIGURE 1 IMS NETWORKING

Interface

When the MSCS serves as a MGCF, the following interfaces are


involved:

Mg interface: The MGCF is connected with the CSCF through


the Mg interface adopting the SIP protocol.

Nc: The MGCF is connected with the R4 CS network through


the Nc interface adopting the BICC protocol.

Ai interface: The MGCF is connected with the PSTN network


through the Ai interface adopting the ISUP protocol.

Mn interface: The MGCF is connected with the IM-MGW


through the Mn interface adopting the H.248 protocol.

Confidential and Proprietary Information of ZTE CORPORATION

ZXWN MSCS Data Configuration Guide(MGCF)

Overall Flow of MGCF Data


Configuration
Prerequisites

Before the data configuration, it is required to confirm:

The hardware installation is completed and the cable connections are normal.
The rack, shelves, and boards are all installed. Cables are all
connected well, and the equipment can be normally powered
on.

The background network management system is installed.


The IP addresses of the background OMM server and client are
planned. The LAN is constructed, and the foreground OMP is
connected.
The OMM server software and client software are installed, ensuring that the OMM client can normally log in to the OMM
server. For the installation of the OMM server software and
client software, refer to ZXWN MSCS MSC Server Software Installation.

Configuration
Flow

The overall flow of the MGCF data configuration is shown in Figure


2.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 1 Data Configuration Overview

FIGURE 2 OVERALL FLOW OF THE MGCF DATA CONFIGURATION

Flow Description

The flow description of MGCF data configuration is shown in .


Steps

Operations

Description

Local office data


configuration

Perform local exchange configuration,


physical configuration, capacity
configuration, version loading, office
information configuration, and basic SIP
configuration for the local office

MGCF-IM-MGW
interconnection
data configuration

Configure the Mn-interface signaling


interconnection data

MGCF-SIP office
interconnection
data configuration

Configure the SIP signaling


interconnection data with CSCF,
BGCF, and MGCF office

Confidential and Proprietary Information of ZTE CORPORATION

ZXWN MSCS Data Configuration Guide(MGCF)

Steps

Operations

Description

MGCF-other
exchange
interconnection
data configuration

Configure the signaling interconnection


data with other offices at the network
side except the MGW, such as MSCS,
PSTN, and 2G MSC

Basic service data


configuration

Configure the data related to the SIP


service and the basic call service

Basic Operations of the


OMM System
To perform data configuration, it is required to be familiar with
the basic operations of the OMM system, including the following
operations.
No.

Operations

Logging in the OMM Client

Entering the MML Terminal

Operations on the MML Terminal

Synchronizing Data

Logging in the OMM Client


Prerequisites

Before the operation, it is required to confirm:

The server and the client of the network management are installed.

The communication between the server and the client is normal.

Context

The purpose of logging in to the OMM client is to perform data configuration and daily maintenance by using the background OMM
software.

Steps

1. On the OMM server, select Start > Programs > ZXWN-CS


(OMM) > Start Server. the NetNumen (TM) Console window pops up, displaying the start process of the OMM server,
as shown in Figure 3.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 1 Data Configuration Overview

FIGURE 3 START PROCESS OF THE OMM SERVER

2. After the OMM server starts successfully, the prompt messages


are displayed in the Detailed Specification area, as shown in
Figure 4.
FIGURE 4 START INFORMATION OF THE OMM SERVER

3. On the server, click Start > Programs > ZXWN-CS (OMM)


> Start Client , and then the Login dialog box appears, as
shown in Figure 5.

Confidential and Proprietary Information of ZTE CORPORATION

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 5 LOGIN WINDOW

4. After entering the login information, click OK.


The parameter description is described in Table 1.
TABLE 1 LOGIN PARAMETER DESCRIPTION

Name

Meaning

Default

User name

Indicates the name of the


subscriber who logs in the
network server. The default
name is admin (system
administrator). If other
subscriber fails to log in the
network management server
for many times (exceeds the
maximum), the subscriber
will be locked automatically.
This subscriber only could be
unlocked by the administrator
or when the locking duration
expires. The login operation
that exceeds the maximum
should be reported to the
network management, so that
the network management could
know the maintenance status of
the equipment in order to avoid
the login of the unauthorized
subscriber and other operation
errors. The maximum login
limitation times in this system
is 3

admin

Password

It indicates the password that is


used to log in the OMM server.
The password of the new
installed network management
is null

Null

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 1 Data Configuration Overview

Name

Meaning

Default

Server
address

Indicates the IP address of the


network management server. If
the server and the client are not
installed in the same computer,
it is required to enter the real
IP address of the server. or
else, you can enter the actual
IP address or adopt the default
IP address

127.0.0.1

END OF STEPS
Result

After the login is successful, the main window of the OMM system
pops up, as shown in Figure 6.
FIGURE 6 NETNUMEN M30 MSCS/MGW OMM SYSTEM WINDOW

Entering the MML Terminal


Prerequisites

To enter the MML terminal, the following condition must be met:


The user has logged in the OMM Server successfully.

Context
Steps

This topic describes how to enter the MML terminal.


1. On the OMM client, select Views > MML Terminal to enter the
MML Terminal window. The left shows the configuration tree,
and the right shows the attribute pane, as shown in Figure 7.

Confidential and Proprietary Information of ZTE CORPORATION

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 7 MML TERMINAL WINDOW

END OF STEPS
Result

Enters the MML Terminal successfully.

Operations on the MML Terminal


Command
Terminal Window

The main operation of the data configuration is to type the command in the MML Terminal window, as shown in Figure 8.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 1 Data Configuration Overview

FIGURE 8 MML TERMINAL WINDOW

On the left pane of the MML Terminal window, the root node
represents the OMM server node, which is the real root node. The
nodes under the root node represent the specific NEs to be configured.
Command Typing

The command is typed in the input box at the lower right corner
of the MML Terminal window. For example, type in command
SET:NEID=11;, as shown in Figure 8.
In general, a command is associated with a network element (except the command used to configure an exchange). For example,
create a shelf for MGCF11(the ID can be queried with the command SHOW NE;). The following two methods can be used to
perform the conjunction:

Command
Execution

Type the command SET: NEID=11; and click F5 to execute the


command (the method is widely adopted in this document).

Select the network element of which the exchange ID is 11


from the left configuration system tree, such as MGCF11.

This part describes the procedure of command line operation. Click


F5 to execute the command after it is typed.
After the command is executed, the Command Execute Result
pane shows the result or the information read by this command,
as shown in Figure 9.

Confidential and Proprietary Information of ZTE CORPORATION

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 9 COMMAND EXECUTION OPERATIONS

Synchronizing Data
Prerequisites

Context

Before the operation, it is required to confirm:

The MML Terminal window is opened.

Some data configurations or all data configuration are completed.

When configuring the data on the OMM, such as creating data,


modifying data or deleting data, the data will be saved to the OMM
Server in the form of data list after executing the F5 button. At
this time, the foreground data are not modified.
The data synchronization is to synchronize the data on the OMM
Server to the foreground.
The data synchronization operation could be done after finishing
each step or after finishing configuring all the data.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Data transfer includes transferring data by using the Admin
user and transferring data by using the current login user.

Synchronize Admin data. The command is SYNA.

Tip:
This command is used by Admin users to synchronize all table data, no matter whether the tables are locked by other
users.
Table 2 describes the parameters in this command.

10

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 1 Data Configuration Overview

TABLE 2 PARAMETERS IN THE SYNA COMMAND


Name

Meaning

Instructions

USERNAME

User name

It consists of 0~50
characters and the default
value is admin
It includes

STYPE

CHG (Single User


Changed Tables)

ALL (All Tables)

ALLCHG (All Changed


Tables)

Module list

It indicates the module ID in


decimal. If there are many
module IDs, use the symbol
& to connect them.

TIMEOUT

Response timeout
(100ms)

It is an optional parameter
and the default value is
600. Adjust the response
timeout according to the
actual requirement.

SAVE

Save when
completed

It is an optional parameter
and the default value is YES

TOSLAVE

Sync to slave when


completed

It is an optional parameter
and the default value is YES

MODULES

Sync type

Synchronize the data of currently login user. The command


is SYN.

Tip:
This command is used to synchronize the table data configured by a login user. The table data not configured by
the login user can not be synchronized to the foreground.
Table 3 describes the parameters in this command.
TABLE 3 PARAMETERS IN THE SYN COMMAND
Name

Meaning

Instructions

MODULES

Module list

It indicates the module


ID in decimal. If there
are many module IDs,
use the symbol & to
connect them.

TIMEOUT

Response timeout
(100ms)

It is an optional
parameter and the
default value is 600.
Adjust the response

Confidential and Proprietary Information of ZTE CORPORATION

11

ZXWN MSCS Data Configuration Guide(MGCF)

Name

Meaning

SAVE

Save when completed

It is an optional
parameter and the
default value is YES

TOSLAVE

Sync to slave when


completed

It is an optional
parameter and the
default value is YES

Instructions
timeout according to
the actual requirement.

Example: To synchronize all the tables with admin user.


The command is as follows:
SYNA:STYPE=ALL,TIMEOUT=600,SAVE=YES,TOSLAV
E=YES;

Example: To synchronize the data of the current user, the


command is as follows:
SYN:TIMEOUT=600,SAVE=YES,TOSLAVE=YES;

END OF STEPS
Result

12

After the command is executed, the progress of table transferring


is shown on the Message Report pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

Local Office Data


Configuration
Table of Contents
Overview..........................................................................14
Local Exchange Configuration..............................................15
Physical Configuration ........................................................18
Capacity Configuration .......................................................34
Version Loading.................................................................39
Creating MGCF Tones in Batches ..........................................65
Office Information Configuration ..........................................67

Confidential and Proprietary Information of ZTE CORPORATION

13

ZXWN MSCS Data Configuration Guide(MGCF)

Overview
Configuration
Flow

Figure 10 shows the flow of the local office data configuration.


FIGURE 10 LOCAL OFFICE DATA CONFIGURATION FLOW

Flow Description

14

The local office data configuration contains the following steps.


Steps

Operations

Procedures

Local exchange
Configuration

Create MGCF exchange and set the


province and city information of the local
office

Physical
configuration

Create foreground-corresponded racks,


shelves, units, modules, and their
attributes on the background OMM
system

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

Steps

Operations

Procedures

Capacity
configuration

Set the MP table capacity

Version loading

Load the version files to the foreground,


which are required for normal running of
different foreground boards

Create MGCF
tones in batches

Create a batch MGCF tones

Office information
configuration

Configure the local office signaling point,


exchange type and country code

Local Exchange
Configuration
Overview
Introduction

Contents

Local exchange configuration is to define the information of the


local exchange on the OMM system such as its type. It is the first
data configuration in deployment.
The exchange configuration contains the following steps.
Steps

Operations

Instructions

Commands

Creating an
exchange

Create the NE
corresponded by
the exchange on the
background OMM
system

ADD NE

Setting province and


city information of
the bureau

Configure the
provincial and
city codes of the
exchange, thus
to display the
area information
in the Element
Management
System (EMS)

SET PCINFO

Creating an Exchange
Prerequisites
Context
Steps

The MML Terminal window is opened.


Perform this procedure to create the NE corresponded by the exchange on the background OMM system.
1. Create an MGCF exchange with the ADD NE command.

Confidential and Proprietary Information of ZTE CORPORATION

15

ZXWN MSCS Data Configuration Guide(MGCF)

Table 4 describes the main parameters in the ADD NE command.


TABLE 4 PARAMETERS IN THE ADD NE COMMAND
Parameter
Name

Parameter Description

Instruction

ID

The unique ID of an
exchange

It is a mandatory
parameter. It ranges
from 11 to 30. It cannot
be modified once it is
created.

TYPE

Type of the exchange to


be created

It is a mandatory
parameter. Select
MSCS.

MESUBTYPE

NE sub-type

It is an optional
parameter. Select NONE
for an end office, and
TMSC1 or TMSC2 for a
tandem office.

NAME

Exchange name
customized by user

It is an optional
parameter. With a
length ranging from 0 to
50 characters.

VENDOR

Equipment manufacturer

It is an optional
parameter. Type ZTE, by
default.

STATE

State defined by the user

It is an optional
parameter. Select 0,
by default.

Location where the


equipment is located

It is an optional
parameter. Type the
location information
of the equipment. It
is recommended to
describe it with letters or
digits.

LOC

Example: Create an MGCF office with the following requirements.

Office ID: 11

TYPE: MSCS

Alias: MGCF11

Other parameter: default.

The specific command is as follows.


ADD
NE:ID=11,TYPE=MSCS,MESUBTYPE=NONE,NAME
="MGCF11",VENDOR="ZTE",STATE=0;
END OF STEPS
Result

16

After the command is executed successfully, the MGCF11 node is


created under the root node in the OMM client interface. Mean-

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

while, the rack is generated, with the rack No. as 1 and the alias
as rack1.

Setting Province and City Information


of the Bureau
Prerequisites

Before the operation, it is required to confirm:

The MGCF exchange is added.

The MML Terminal window is opened.

Context

Perform this procedure to configure the provincial and city codes of


the exchange, thus to display the area information in the Element
Management System (EMS).

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Set the province and city codes of the exchange. The command
is SET PCINFO.
Table 5 describes the main parameters in the SET PCINFO
command.
TABLE 5 PARAMETERS IN THE SET PCINFO COMMAND
Parameter Name

Parameter
Description

Instruction

PROVINCE

Provincial code

It is a mandatory parameter. For


displaying area information of the
exchange in the EMS.

CITY

City code

It is a mandatory parameter. For


setting the city code.

Example: Set the province and city codes of the exchange.


The exchange is located in Nanjing city of Jiangsu province.
The specific command is as follows.
SET PCINFO:PROVINCE="320000",CITY="320101";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

17

ZXWN MSCS Data Configuration Guide(MGCF)

Physical Configuration
Overview
Introduction
Flow diagram

This section describes the physical configuration .


Figure 11 shows the physical configuration flow.
FIGURE 11 PHYSICAL CONFIGURATION FLOW

Flow description

18

The physical configuration contains the following steps.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

Steps

Operations

Instructions

Command

Creating a Rack

Create a logic rack


on the background
OMM system

ADD RACK

Creating a Shelf

Create a logic shelf


on the background
OMM system

ADD SHELF

Creating the UIM


Unit

Create the UIM


board

ADD UNIT

Creating a Module

When MSCS has


several modules,
it is required to
create SMP board
for BCTC shelf

ADD MODULE

Creating Other
Units

Create other logic


boards in the BCTC
shelf of MSCS
exchange, except
for UIM unit

ADD UNIT

Creating
Background Server
Node

Connect the SMP


with the billing
server

ADD SVRINF

Creating a Rack
Prerequisites

Before the operation, it is required to confirm:

The exchange has been created.

The MML Terminal window is opened.

Context

Perform this procedure to create a logic rack on the background


OMM system. It corresponds to the rack on the foreground. Since
the system automatically creates rack 1 during the exchange creation, you need not to create it again. But you need to create
other racks manually here.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a rack. The command is ADD RACK.
Table 6 describes the parameters in the ADD RACK command.

Confidential and Proprietary Information of ZTE CORPORATION

19

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 6 PARAMETERS IN THE ADD RACK COMMAND


Parameter
Name

RACK

Parameter
Description

Instructions

Rack No.

It is a mandatory
parameter within 1~15.
Rack 1 is generated during
creating the exchange.
Other racks need to be
created by manual. The
rack No. begins from 2

Rack type, includes

3G_STANDARD_RACK: ZTE
standard rack

3G_INTEGRATION_RACK: ZTE
integration rack

RACK TYPE

NAME

Alias

It is an optional
parameter. Select it
according to the actual
rack type.

It is an optional parameter
and consists of 0~50
strings

Example: Create a ZTE standard rack whose rack No. is 2.


The command is as follows.
ADD RACK:RACK=2,RACKTYPE=3G_STANDARD_RACK,NA
ME="RACK2";
Example: Create a ZTE integration rack whose rack No. is 3.
The command is as follows.
ADD
RACK:RACK=3,RACKTYPE=3G_INTEGRATION_RAC
K,NAME="RACK2";
END OF STEPS
Result

After the command is executed successfully, the rack is created under MGCF11 exchange, and is shown on the Daily Maintenance
> Rackchart Management tab.

Creating a Shelf
Prerequisites

Context

20

Before the operation, it is required to confirm:

You know the ID of the exchange to be configured.

The rack is created under the corresponding exchange.

The MML Terminal window is opened.

Perform this procedure to create a logic shelf on the background


OMM system. It corresponds to the shelf on the foreground. MGCF
only adopts BCTC shelf. One rack can be configured with up to four
BCTC shelves.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

Note:
Shelf 2 of rack 1 must be created first, and then other shelves are
created.
Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a shelf. The command is ADD SHELF.
Table 7 describes the parameters in the ADD SHELF command.
TABLE 7 PARAMETERS IN THE ADD SHELF COMMAND
Name

Meaning

Instructions

RACK

Rack No.

It is a mandatory parameter that is within


1~15.

SHELF

Shelf No.

It is a mandatory parameter, ranging from


1 to 4. Shelf 2 must be configured first.

TYPE

Shelf type

It is a mandatory parameter. MGCF


can only be configured with BCTC shelf
(control shelf).

NAME

Alias

It is an optional parameter, with a length


ranging from 0 to 50 characters.

Example: Create a BCTC shelf in rack 1, with the shelf number


as 2 and the name as BCTC. The specific command is as
follows.
ADD
C";

SHELF:RACK=1,SHELF=2,TYPE=BCTC,NAME="BCT

END OF STEPS
Result

After BCTC shelf is created successfully, the OMP module and the
RPU module are created at the same time. The numbers of these
two modules are 1 and 2. Slots 11 and 12 of the rack display the
OMP board.

Creating the UIM Unit


Prerequisites

Before the operation, it is required to confirm:

You know the ID of the exchange to be configured.

The BCTC shelf is created in the corresponding rack.

The MML Terminal window is opened.

Confidential and Proprietary Information of ZTE CORPORATION

21

ZXWN MSCS Data Configuration Guide(MGCF)

Context

Creating the UIM unit is to create the UIM board. In general, UIM
board adopts 1+1 backup mode. It is fixedly inserted into slots 9
and 10 in the BCTC shelf.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a UIM Unit. The command is ADD UNIT.

Note:
You must first create the UIMC unit in shelf 2 of rack 1, and
then create the UIMC units in other BCTC shelves.
Table 8 describes the parameters in the ADD UNIT command.
TABLE 8 PARAMETERS IN THE ADD UNIT COMMAND
Parameter
Name

Parameter
Description

Instruction
It is a mandatory parameter and
the format is RACK-SHELF-SLOT.

LOC

22

Unit location

The rack No. is within 1~15


and the default value is 1.
This parameter is defined by
the ADD RACK command.

The shelf No. is within 1~4.


This parameter is defined by
the ADD SHELF command.

The slot represents the slot


number. In BCTC shelf, the
UIM slot number must be 9
and 10.

MODULE

Module No.

It is a mandatory parameter.
Select 1.

UNIT

Unit No.

It is an optional parameter,
ranging from 1 to 2000.

TYPE

Unit type

It is a mandatory parameter.
Select it according to the
CPU type of the UIMC board,
including UIM2_GCS_755
and UIM2_GCS_8260.
UIM2_GCS_755 sub-card
is mostly used at present.

BKMODE

Backup mode

It is a mandatory parameter
and the backup mode is
ONEPLUSONE.

NAME

Alias

It is an optional parameter and


consists of 0~50 characters.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

Example: Add the UIM units with the following requirements.

Rack No.: 1

Shelf No.: 2

Slot No.: 9 and 10

Unit type: UIM2_GCS_755

Backup mode: 1+1 backup

The specific command is as follows.


ADD UNIT:LOC="1"-"2"-"9",MODULE=1,UNIT=921,TYPE
=UIM2_GCS_755,BKMODE=ONEPLUSONE,CLK1=16383,CL
K2=16383;

Tip:
After the 1+1 backup mode is selected for the UIM board located in slot 9, the system will automatically create the UIM
board located in slot 10. In addition, the unit numbers of left
and right slots are consistent.
END OF STEPS
Result

After the UIM unit is created successfully, the active and standby
UIM boards are shown in the corresponding slots of the rack chart.

Creating a Module
Prerequisites

Before the operation, it is required to confirm:

You know the ID of the exchange to be configured.

The UIM unit is created under the exchange.

The MML Terminal window is opened.

Context

When MGCF has several modules, it is required to create SMP


board for BCTC shelf. When BCTC has more shelves, SMP and
CMP modules should be allocated to each BCTC shelf equally.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a module. The command is ADD MODULE.
Table 9 describes the parameters in the ADD MODULE command.

Confidential and Proprietary Information of ZTE CORPORATION

23

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 9 PARAMETERS IN THE ADD MODULE COMMAND


Name

Meaning

Instructions

LOC

Location

It is a mandatory parameter. Its


format is RACK-SHELF-SLOT. The
range of RACK is within 1~15 and
the default value is 1. The shelf
No. is within 1~4 and the slot No.
is within 1~17.

MODULE

Module No.

It is a mandatory parameter,
ranging from 3 to 127. A new
module is numbered from 3.
It is a mandatory parameter.

FUNC1

Module 1 type

Select SMP for a signaling


module.

Select MSCBASECMP for a


service module.

When MSCS serves as MGCF,


select SIP type.

Module 2 type

It is an optional parameter. If it is
left blank, its configuration is the
same as that of FUNC1.

CPU type

It is an optional parameter.
Two options available, X86 and
CENTRINO. Select according to
the actual board type.

BKMODE

Backup mode

It is an optional parameter. In
general, select ONEPLUSONE
(one plus one backup) for a service
module, and ONEPLUSONE (one
plus one backup) or No (Without
backup) for a signaling module,
which is determined by the actual
configuration.

NAME1

Module 1 user
alias

It is an optional parameter and


consists of 0~50 characters.

NAME2

Module 2 user
alias

It is an optional parameter and


consists of 0~50 characters.

FUNC2

CPUTYPE

Example: Create SMP modules with the following requirements.

24

Location: Slots 5 and 6 in BCTC shelf 2 of rack 1

Module number: 3 and 4

Module type: SMP

CPU type: CENTRINO

Backup mode: 1+1 backup

Module 1 name: SMP3

Module 2 name: SMP4.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

The specific command is as follows.


ADD MODULE:LOC="1"-"2"-"5",MODULE="3"&"4",FUNC1
="SMP",FUNC2="SMP",CPUTYPE=CENTRINO,BKMODE=ON
EPLUSONE,NAME="SMP3",NAME2="SMP4";
Example: Create CMP modules with the following requirements.

Location: Slots 7 and 8 in BCTC shelf 2 of rack 1

Module number: 5 and 6

Module type: CMP

CPU type: CENTRINO

Backup mode: 1+1 backup

Module 1 name: CMP5

Module 2 name: CMP6.

The specific command is as follows.


ADD MODULE:LOC="1"-"2"-"7",MODULE="5"&"6",FUNC1
="MSCBASECMP"&"SIP",FUNC2="MSCBASECMP"&"SIP",CP
UTYPE=CENTRINO,BKMODE=ONEPLUSONE,NAME="CMP5
",NAME2="CMP6";
END OF STEPS
Result

After the SMP/CMP module is created successfully, its corresponding slot in the rack chart displays the SMP board.

Creating other Units


Prerequisites

Context

Before the operation, it is required to confirm:

You know the ID of the exchange to be configured.

The UIM unit is created.

The MML Terminal window is opened.

Perform this procedure to create other logic boards in the BCTC


shelf of MGCF exchange, except for UIM unit.
Table 10 lists the main boards in MGCF.
TABLE 10 MGCF BOARD TYPES
Board

Board Type

Backup Mode

SIPI2_IPSEC
SIPI

SIPI2_NC

No backup or 1+1
active/standby backup

SIPI_NC
SPB2_8260_8260C4
SPB

No backup
SPB2_8250_85XXC2

Confidential and Proprietary Information of ZTE CORPORATION

25

ZXWN MSCS Data Configuration Guide(MGCF)

Board

Board Type

Backup Mode

USI2_NC
USI

1+1 active/standby backup


USI_NC

Steps

CHUB

CHUB

1+1 active/standby backup

CLKG

CLKG

1+1 active/standby backup

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create other units. The command is ADD UNIT.
No.

Operations

Creating a CHUB unit

Creating a CLKG unit

Creating an SIPI unit

Creating a USI Unit

Creating an SPB unit

END OF STEPS

Creating a CHUB Unit


Prerequisites

Before the operation, it is required to confirm:

You know the ID of the exchange to be configured.

The UIM unit is created.

The MML Terminal window is opened.

Context

Perform this procedure to create the CHUB logic board corresponding to that in the foreground BCTC shelf of MGCF exchange.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a CHUB unit. The command is ADD UNIT.
Table 11 describes the main parameters in the command.

26

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

TABLE 11 PARAMETER IN THE ADD UNIT COMMAND


Parameter
Name

Parameter
Description

Instruction
It is a mandatory parameter, with
a format of RACK-SHELF-SLOT

Location of
the unit in the
system

LOC

RACK represents the rack


number, ranging from 1 to 15.
In general, it is configured as
1.

SHELF represents the shelf


number, ranging from 1 to 4.

SLOT represents the slot


number. CHUB boards are
fixedly inserted into slots 15
and 16 in shelf 2 of rack 1.

MODULE

Module
number of the
unit

It is a mandatory parameter.
Select 1

UNIT

Unit number
of the board

It is an optional parameter
ranging from 1 to 2000.

TYPE

Logic unit type


of the board

Select CHUB

BKMODE

Backup mode
of the unit

Select ONEPLUSONE 1+1


active/standby backup

Example: Create CHUB boards with the following requirements.


Location: Slots 15 and 16 of shelf 2 in rack 1
Unit type: CHUB
Backup mode: 1+1 active/standby backup
Other parameters: default.
The specific command is as follows.
ADD UNIT:LOC="1"-"2"-"15",MODULE=1,UNIT=1521,TY
PE=CHUB,BKMODE=ONEPLUSONE,CLK1=16383,CLK2=16
383;
END OF STEPS
Result

After the unit is created successfully, corresponding slots of the


rack chart display these CHUB boards.

Creating a CLKG Unit


Prerequisites

Before the operation, it is required to confirm:

You know the ID of the exchange to be configured.

The UIM unit is created.

The MML Terminal window is opened.

Confidential and Proprietary Information of ZTE CORPORATION

27

ZXWN MSCS Data Configuration Guide(MGCF)

Context

Perform this procedure to create the CLKG logic board corresponding to that in the foreground BCTC shelf of MGCF exchange.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a CLKG unit. The command is ADD UNIT.
Table 12 describes the parameters in the command.
TABLE 12 PARAMETERS IN THE ADD UNIT COMMAND
Parameter Name

Parameter
Description

LOC

Unit location

Instruction
It is a mandatory parameter and
the format is RACK-SHELF-SLOT.

The rack No. is within 1~15


and the default value is 1. This
parameter is defined by the
ADD RACK command.

The shelf No. is within 1~4.


This parameter is defined by
the ADD SHELF command.

The slot No. is within 1~17.

MODULE

Module No.

It is a mandatory parameter.
Select the OMP module belonging
to CLKG.

UNIT

Unit No.

It is an optional parameter, ranging


from 1 to 2000.

TYPE

Unit type

It is a mandatory parameter. For


CLKG, select CLKG

BKMODE

Backup mode

It is a mandatory parameter
and the backup mode is
ONEPLUSONE.

NAME

Alias

It is an optional parameter and


consists of 0~50 characters.

Example:
ments.

Create CLKG boards with the following require-

Location: Slots 13 and 14 of shelf 2 in rack 1

Unit type: CLKG

Backup mode: 1+1 active/standby backup

Other parameters: default.

The specific command is as follows.


ADD UNIT:LOC="1"-"2"-"13",MODULE=1,UNIT=1321,TY
PE=CLKG,BKMODE=ONEPLUSONE,CLK1=16383,CLK2=163
83;

28

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

3. After creating the CLKG unit, configure the CLKG board parameters with the SET CLKETHR command as required. Configure
its parameters based on the clock source actually provided.
Example: Configure clockbase setting of the CLKG board to be
allowed, and the clock reference is 8KBase. The command is
as follows.
SET CLKETHR:CLKBASE=ALLOWED,BASETYPE=8KBase,B
ASEINFO="8KBase";
END OF STEPS
Result

After the unit is created successfully, corresponding slots of the


rack chart display these CLKG boards.

Creating an SIPI Unit


Prerequisites

Context

Before the operation, it is required to confirm:

You know the ID of the exchange to be configured.

The UIM unit is created.

The MML Terminal window is opened.

Perform this procedure to create the SIPI logic board corresponding to that in the foreground BCTC shelf of MGCF exchange.

SIPI boards work in load-sharing mode


In load-sharing mode, two SIG-IPI boards both serve as active board, and maintain each own associations. The relationship between associations is load-sharing, which means that
the service transmission is shared evenly by the associations
of these two SIG_IPI boards. When the association on one of
these two interface boards is interrupted, all the service data
will be moved to the association of another interface board that
works normally. In this way, the inter-office communication
will not be interrupted for this cause. This project is recommended for office commissioning .

SIPI boards work in active/standby mode .


Two SIG_IPI boards serve as mutual backup. In normal conditions, associations are only processed on active board, and
backed up only on standby board. The associations on the active board are disconnected when the active board is abnormal
or extracted. At this moment, the standby board quickly replaces the active board to connect the associations, thus to
restore the normal communication between offices.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create an SIPI unit. The command is ADD UNIT.
Table 13 describes the main parameters in the command.

Confidential and Proprietary Information of ZTE CORPORATION

29

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 13 PARAMETERS IN THE ADD UNIT COMMAND


Parameter Name

Parameter
Description

Instruction
It is a mandatory parameter, with
a format of RACK-SHELF-SLOT

LOC

RACK represents the rack


number, ranging from 1 to 15.
In general, it is configured as
1

SHELF represents the shelf


number, ranging from 1 to 4

SLOT represents the slot


number

Location of
the unit in the
system

MODULE

Module number
of the unit

It is a mandatory parameter.
Select 1

UNIT

Unit number of
the board

It is an optional parameter.
Ranging from 1 to 2000.

TYPE

Logic unit type


of the board

Select SIPI_NC

Backup mode of
the unit

It supports the NO (Without


backup) and ONEPLUSONE (One
plus one backup) modes. Select it
according to the actual networking
mode

BKMODE

Example: Add SIPI boards with the following requirements.

Location: Slots 3 and 4 of shelf 2 in rack 1

Unit type: SIPI_NC

Backup mode: 1+1 active/standby backup

Other parameters: default.

The specific command is as follows.


ADD UNIT:LOC="1"-"2"-"3",MODULE=1,UNIT=321,TYPE
=SIPI_NC,BKMODE=ONEPLUSONE,CLK1=16383,CLK2=16
383;
END OF STEPS
Result

After the unit is created successfully, corresponding slots of the


rack chart display these SIPI boards.

Creating a USI Unit


Prerequisites

30

Before the operation, it is required to confirm:

You know the ID of the exchange to be configured.

The UIM unit is created.

The MML Terminal window is opened.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

Context

Perform this procedure to create the USI logic board corresponding


to that in the foreground BCTC shelf of MGCF exchange.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a USI unit. The command is ADD UNIT.
Table 14 describes the main parameters in the ADD UNIT command.
TABLE 14 PARAMETERS IN THE ADD UNIT COMMAND
Parameter
Name

Parameter
Description

Instruction
It is a mandatory parameter, with
a format of RACK-SHELF-SLOT

RACK represents the rack


number, ranging from 1 to 15.
In general, it is configured as
1

SHELF represents the shelf


number, ranging from 1 to 4

SLOT represents the slot


number

Location of
the unit in the
system

LOC

MODULE

Module number
of the unit

It is a mandatory parameter.
Select 1

UNIT

Unit number of
the board

It is an optional parameter.
Ranging from 1 to 2000

TYPE

Logic unit type


of the board

Select USI_NC

BKMODE

Backup mode
of the unit

Select ONEPLUSONE

Example: Create SIPI boards with the following requirements.

Location: Slots 1 and 2 of shelf 2 in rack 1

Unit type: USI_NC

Backup mode: 1+1 active/standby backup

Other parameters: default.

The specific command is as follows.


ADD UNIT:LOC="1"-"2"-"1",MODULE=1,UNIT=121,TYPE
=USI_NC,BKMODE=ONEPLUSONE,CLK1=16383,CLK2=163
83;
END OF STEPS

Confidential and Proprietary Information of ZTE CORPORATION

31

ZXWN MSCS Data Configuration Guide(MGCF)

Result

After the unit is created successfully, corresponding slots of the


rack chart display these USI boards.

Creating an SPB Unit


Prerequisites

Before the operation, it is required to confirm:

You know the ID of the exchange to be configured.

The UIM unit is created.

The MML Terminal window is opened.

Context

Perform this procedure to create the SPB logic board corresponding to that in the foreground BCTC shelf of MGCF exchange. SPB
board is created only when the narrowband No.7 signaling is used
between MGCF and other offices.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create an SPB unit. The command is ADD UNIT.
Table 15 describes the main parameters in the ADD UNIT command.
TABLE 15 PARAMETERS IN THE ADD UNIT COMMAND
Parameter
Name

Parameter
Description

Instruction
It is a mandatory parameter and
the format is RACK-SHELF-SLOT.

LOC

32

The rack No. is within 1~15


and the default value is 1.
This parameter is defined by
the ADD RACK command.

The shelf No. is within 1~4.


This parameter is defined by
the ADD SHELF command.

The slot No. is within 1~17.

Location of
the unit in the
system

MODULE

Module number
of the unit

It is a mandatory parameter.
Select 1

UNIT

Unit number of
the boar

It is an optional parameter.
Ranging from 1 to 2000.

TYPE

Logic unit type


of the board

Select it according to the CPU type


of this SPB board, for example,
SPB2_8260_8260C4

BKMODE

Backup mode
of the unit

Select No backup

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

Example: Create an SPB board with the following requirements.

Location: Slot 7 of shelf 2 in rack 1

Unit type: SPB_8260_8260C4

Backup mode: No backup

Other parameters: default.

The command is as follows.


ADD UNIT:LOC="1"-"2"-"7",MODULE=1,UNIT=721,TYPE
=SPB2_8260_8260C4,BKMODE=NO,CLK1=16383,CLK2=16
383;
Example: Create an SPB board with the following requirements.

Location: Slot 8 of shelf 2 in rack 1

Unit type: SPB_8260_8260C4

Backup mode: No backup

Other parameters: default.

The command is as follows.


ADD UNIT:LOC="1"-"2"-"8",MODULE=1,UNIT=821,TYPE
=SPB2_8260_8260C4,BKMODE=NO,CLK1=16383,CLK2=16
383;
END OF STEPS
Result

After the unit is created successfully, corresponding slot of the rack


chart display the SPB board.

Creating Background Server Node


Prerequisites

Before the operation, it is required to confirm:

You know the ID of the exchange to be configured.

The corresponding MP module is created.

The MML Terminal window is opened.

Context

Perform this procedure to connect the SMP with the billing server.
All SMP units should be mapped to the billing server.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create the background server node. The command is ADD
SVRINF.
Table 16 describes the main parameters in the ADD SVRINF
command.

Confidential and Proprietary Information of ZTE CORPORATION

33

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 16 PARAMETER IN THE ADD SVRINF COMMAND


Parameter
Name

Parameter Description

Instruction

MODULE

Module number of
foreground MP

It is a mandatory
parameter, ranging from
1 to 127, including all
the modules except for
module 2

CGMODULE

Module number of
billing server

It is an optional
parameter, ranging
from 130 to 135

Example: Create the billing server node 130 corresponding to


the foreground SMP module 3. The specific command is as
follows.
ADD SVRINF:MODULE=3,CGMODULE=130;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Capacity Configuration
Overview
Table 17 shows the capacity configuration flow.
TABLE 17 CAPACITY CONFIGURATION
Steps

Operation

Instruction

Command

Configuring the
MGCF office
capacity

Configure the
capacity for each
table in the MP
module

SET MSCSCAPAC
ITY

Configuring service
data area

Normally select the


default value for all
parameters

SET DATASIZE

Configuring the MGCF Office


Capacity
Prerequisites

34

To perform this operation, the following conditions must be met:

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

The ID of the exchange to be configured is known.

The physical configuration is completed.

The MML Terminal window is opened.

Context

This topic describes how to configure the capacity for each table
in the MP module. MGCF capacity is configured according to the
actual capacity of the equipment. In general, these parameters
adopt their default value, except in special cases.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Configure the MGCF office capacity with the command SET
MSCSCAPACITY.
The parameter description of the command SET MSCSCAPAC
ITY is shown in Table 18.
TABLE 18 OFFICE CAPACITY CONFIGURATION PARAMETERS
Name

Meaning

Range

Default

GCI

Capacity Of GCI Config


Table

1~12000

1280

LAI

Capacity Of LAI Config


Table

1~1000

64

AOCFEE

Capacity Of Tariff Config


Table

1~1000

128

IROAM

Capacity Of IMSI Analysis Config Table

1~3000

1000

PCM

Capacity Of PCM Table

2000~20000

2048

BSC

Capacity Of
Config Table

1~128

32

MASK

Capacity Of Black/ White


List Number

1~80000

2048

NUMLEN

Capacity Of Number Preanalysis

1~20000

1000

CALLDATA

Capacity Of CFG Relationship Table

1~1024

512

CTRLUNT

Capacity Of Access Network Unit

1~128

64

SIPTRA

Capacity Of SIP Process


Data

2000~20000

6000

SIPSTA

Capacity Of SIP Function


Adaptor Data

1000~8000

3000

BSC/RNC

Confidential and Proprietary Information of ZTE CORPORATION

35

ZXWN MSCS Data Configuration Guide(MGCF)

Name

Meaning

SIPRES

Capacity Of SIP Call Resources

1000~8000

2500

HRBTMS

Capacity Of Home Ring


Back Tone

1~80000

SSP

Capacity
Of
Special
Service Phone Group

1~60000

1024

USER

Capacity Of Users Undercontrol

1~80000

4000

TIDTRUNK

Capacity Of
Trunk Link

1~1024

512

MDNAL

Capacity Of Mobile NumAnalysis Config

1~65535

8192

DNAL

Capacity Of Num-Analysis Config

1~100000

8192

MPDFT

Capacity Of Default PerDef Timer(MP)

2000~10000

2000

MPDEF

Capacity Of Defined PreDef Timer(MP)

2000~15000

2000

PPDFT

Capacity Of Default PreDef Timer(PP)

2000~10000

2000

PPDEF

Capacity Of Defined PreDef Timer(PP)

2000~10000

2000

LIMITMS

Capacity Of Limit Cheating Subscriber

0~60000

DNHOME

Capacity
Home

1~400000

150000

LINK

Capacity Of Link

1920~5000

1920

GT

Capacity Of GT

20001~50000

20000

SPC

Capacity Of SPC

1~2000

2000

VMSC

Capacity Of VMSC Table

16~256

16

SAI

Capacity Of SAI Config


Table

1~12000

1280

MGW

Capacity Of MGW

1~128

32

ANANACAPACITY

Capacity Of Announcement User Analyzer

1~65535

1024

TID

Of

Range

And

Number

Default

For example, configure the MGCF office capacity. Select the


default value for all parameters. The command is as follows:

36

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

SET MSCSCAPACITY;
END OF STEPS
Result
Postrequisite

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.
1. Configure the OMP startup parameters through a serial port.
2. Synchronize the capacity planning table to the foreground.
3. Restart OMP and the realted MP boards.
4. Synchronize all the tables to the foreground again.

Note:
It is required to synchronize the office capacity table to the foreground twice. After the first synchronization, wait 5~10 minutes
for the OMP to complete the disk saving, and then restart the OMP.
When the OMP starts successfully, it is required to synchronize the
capacity tables to the OMP again. After the first synchronization,
only the space of the capacity table on the OMP is established, but
the table contents are not added. After the second synchronization, the table contents are synchronization.

Configuring Service Data Area


Prerequisites

Before the operation, it is required to confirm:

You know the ID of the exchange to be configured.

The physical configuration is completed.

The MML Terminal window is opened.

Context

Perform this procedure to configure the service data area. Generally, it adopts the default value, except in special cases.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Configure the service data area. The command is SET DATA
SIZE.
Table 19 shows the description of main parameters in the SET
DATASIZE command.

Confidential and Proprietary Information of ZTE CORPORATION

37

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 19 PARAMETERS IN THE SET DATASIZE COMMAND


Parameter
Name

Parameter
Description

Instruction

CMODEL

One-MSC
multi-MGW call
model, including
AMONLY(Associated Mode Only)
and QAMALLOW(Quasi-associated Mode
Allowed)

Select QMALLOW when a


call needs three MGWs under
the MSCS to provide bearers.
Otherwise, select AMONLY

Number of BCBM
data areas

Configure it as 10 when
the MSCS is associated
with one MGW to conform
a network, or in a full IP
networking mode. Configure
it as 3600 when the end
office adopts the multi-call
model. Configure it as 12400
when the tandem office and
gateway office adopt the
multi-call model.

DSTCDNUM

Number of
destination codes

Type an integer ranging


from 1 to 10000, which
is associated with
the destination-code
traffic-statistics in the
performance statistics.

CTSTNUM

Maximum number
of mixed flow of
traffic

Integer numbers ranging


from 100 to 11000

CTSTINDEXS
IZE

CTST index size


(KB)

Integer numbers ranging


from 16 to 4096

VMSCNO7
NUM

Number of
VMSC/OMP module
NO7 call data area

Integer numbers ranging


from 2000 to 10000

CMPNO7NUM

Number of CMP
module NO7 call
data area

Integer numbers ranging


from 10000 to 30000

BCBMNUM

Example: Configure a service data area. The MGCF is associated with an MGW. The number of destination codes is 4096.
Other parameters adopt the default value. The specific command is as follows.
SET DATASIZE:CMODEL=AMONLY,BCBMNUM=10,DSTCD
NUM=4096;
END OF STEPS
Result

38

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

Version Loading
All physical boards need the software to support the running. If
the same physical board is loaded with different running software,
it will be with different functions. At first, the physical board is not
loaded with the software supporting the running, so it is required
to load it by manual.
The version files of the OMP module are obtained from the OMC
server via FTP. For the version files of other boards (including RPU),
they are obtained from OMP during the restart. The steps to load
the version files are as follows:

Load the version files that are needed by the board from the
configured version file directory to the version database of the
OMC server.

Add the version files in the version database into the foreground OMP.

Add the corresponding records into the database table related


to the version files, so the other boards could obtain the version
files from OMP according to these records.

During restarting the board, compare the existing version files


with the old version files on OMP and check whether they are
consistent. If they are the same, adopt the old version fiels;
otherwise, download the new version files from OMP.

Confidential and Proprietary Information of ZTE CORPORATION

39

ZXWN MSCS Data Configuration Guide(MGCF)

Overview
Configuration
Flow

Figure 12 shows the loading flow of a board version files.


FIGURE 12 FLOW OF LOADING VERSION FILES

Flow Description

40

Steps

Operations

Instructions

Creating the
version file
directory

Make sure the version number and path of


the version files to be loaded.

Creating OMP
boot files

Generate the ompcfgX.ini (X is the ID of


corresponded exchange) boot file on the
OMM server. OMP board loads its version
files according to this file.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

Steps

Operations

Instructions

Configuring the
OMP startup
parameters via
serial port

Configures some parameter information


for OMP board to communicate with OMM
server during startup.

Configuring OMP
global data

After OMP board is started, the OMP


global data should be configured to make
sure that the foreground/background
IP addresses are in the same network
section.

Synchronizing
all tables

After the data configuration is completed,


the configuration data stored on the OMM
server are synchronized to the foreground
for foreground NEs to get the configuration
data from the OMM server.

Loading version
files

Manually loads the version files required


for board running.

Creating Version File Directory


Prerequisites

Before the operation, it is required to confirm:

The version file has been prepared.

The physical configuration and the capacity configuration are


completed.

The MML Terminal window is opened.

Context

Perform this procedure to create the version ID and version path


of the version file to be loaded.

Steps

1. On the NetNumen M30 window, select menus Views > Professional Maintenance to enter the Professional Maintenance window.
2. In the left pane, double-click the exchange node in the Professional Maintenance tree. Select Version Management
> Version Mainenance to show the Version Maintenance
tab in the right pane, as shown inFigure 13.

Confidential and Proprietary Information of ZTE CORPORATION

41

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 13 VERSION LOADING

3. On the Load Version tab, Click the button on the sub-toolbar to pop up the Config Version Path tab, as shown in Figure
14.
FIGURE 14 CONFIGURING VERSION PATH

4. Right-click the list on the Config Version Path tab, and select
Create from the short-cut menu. A new blank entry is created
on the Config Version Path tab, as show in Figure 15.

42

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

FIGURE 15 ADDING NEW BLANK ENTRY

5. Double-click the Version Name on the tab, and type the version name (the version name format is V0.00.00.B0, in which,
0 indicates digital and B indicates character), which should be
consistent with the version name of the version file, as show
in Figure 16.
FIGURE 16 CONFIGURING VERSION NAME

Confidential and Proprietary Information of ZTE CORPORATION

43

ZXWN MSCS Data Configuration Guide(MGCF)

6. On the Config Version Path tab, double-click the blank entry


in the File Path column. The
button appears.
7. Click the
button and then the OPEN dialog will pop up.
Select the save path for the version file, the version file path
appears in the File Path entry, as shown in Figure 17.
FIGURE 17 VERSION FILE PATH

8. After setting the path, it is required to save the setting. On


the Config Version Path tab, right click any item and then
select the Save button. After the successful saving, the Save
Successfully dialog appears. Click the OK button.
END OF STEPS
Result

The correct Version Name and File Path appears on the the Version Maintenance tab.

Creating OMP Boot Files


Prerequisites

Context

Before the operation, it is required to confirm:

Version file directory is configured.

The MML Terminal window is opened.

To create an OMP boot file is to generate an ompcfgX.ini boot file


on the OMM server, of which the X is the number of the corresponding exchange. This file contains the file names of CPU and
FPGA required for normal running of OMP module.
The CPU files and the FPGA files required by OMP are listed in Table
20.

44

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

TABLE 20 VERSION DESCRIPTION OF OMP BOOT FILE


OMP CPU
Type

Version Type

Version File Name

CPU

MSCS_MPX86_MP_X86_CS_Z_T.
BIN

FPGA

MPX86_05_040202_FPGA_105.
RBF

CPU

MSCS_MPX86_2_MP_P4_CS_Z_
T.BIN

FPGA

MPX862_04_040704_FPGA_109.
RBF

MPX86

CENTRINO

Steps

1. On the NetNumen M30 window, select menus Views > Professional Maintenance to enter the Professional Maintenance window.
2. In the left pane, double-click the exchange node in the Professional Maintenance tree. Select Version Management
> Version Mainenance to show the Version Mainenance
tab in the right pane, as shown in Figure 18.
FIGURE 18 LOAD VERSION

3. On the Version Mainenance tab, select the version name


from the pull-down list of the Version, as shown in Figure 19.

Confidential and Proprietary Information of ZTE CORPORATION

45

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 19 VERSION LIST

4. On the Version Mainenance tab, press the CTRL key while


selecting the CPU file and FPGA file required by the OMP, which
are listed in Table 20. Right-click the selected version files, and
then select Create OMP Ini File from the shortcut menu, as
shown in Figure 20.
FIGURE 20 CREATING OMP BOOT FILES

5. After the OMP boot file is created successfully, the message


area prompts that OMP boot files are created successfully, click
OK, as show in Figure 21.

46

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

FIGURE 21 SUCCESSFUL INFOMATION

END OF STEPS
Result

The boot file and version file appear in directory \zxwomcs\umssvr on the OMM server.

Configuring OMP Running


Parameters via Serial Port
Prerequisites

Before the operation, it is required to confirm:

The serial cable has been prepared.

The OMP boot file has been created.

The hyper-terminal has been installed on the computer.

Context

Perform this procedure to configure some parameters, including


OMM address, OMC server address, office ID, FTP user name/password and startup mode. These parameters are required by OMP
board to communicate with the OMM server during startup.

Steps

1. Connect one end of RS232 serial cable to serial port of debugging computer, another end to debug port of OMP backboard.
2. On the debugging computer, click Start > Programs >
Accessories > Communications > Hyper Terminal in the
Windows OS, as shown in Figure 22.

Confidential and Proprietary Information of ZTE CORPORATION

47

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 22 CONNECTION DESCRIPTION

3. After click OK, the following figure pops up. Select the serial
port connected to the foreground and then click OK, as shown
in Figure 23.
FIGURE 23 CONNECT TO DIALOG BOX

4. On the COM1 dialog box, click the Restore Defaults button,


and then click OK, as shown in Figure 24

48

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

FIGURE 24 COM1 PROPERTIES

5. After entering the hyper-terminal, if there is no words, restart


the OMP board. When the Press any key to stop auto-boot...
prompt appears after entering hyper-terminal, press any key
instantly to stop automatic booting and then to configure the
OMP parameters, as shown in Figure 25.
FIGURE 25 PRESS ANY KEY TO STOP AUTO-BOOT

6. If the Boot Password (3GPLAT or 3gplat) appears, as shown in


Figure 26, type the password 3gplat and press Enter.

Confidential and Proprietary Information of ZTE CORPORATION

49

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 26 BOOT PASSWORD

7. When the 3GPlat Boot appears, type 1 to select Config MPnet parameters (only for Omp and Cmp), and then press
Enter, as shown in Figure 27.
FIGURE 27 3GPLAT BOOT

8. Open the Config selection window, type 1 to select Set Omp


(or Cmp)s Omc IP.MAC.Gateway IP, and then press Enter,
as shown in Figure 28.

50

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

FIGURE 28 CONFIG SELECTION

9. Enter the OMPs OMC Ip Address window, and type the IP


address 192.168.X.1 in which, the X indicates the office direction ID of the office, and then Press Enter, as shown in Figure
29.
FIGURE 29 ENTER OMPS OMC IP ADDRESS

10. Enter the Enter OMPs OMC Mac address window, type the
hardware address 00.208.208.161.00.X planned by OMP, in
which, the X indicates the office ID of the office, as shown in
Figure 30. Press Enter.

Confidential and Proprietary Information of ZTE CORPORATION

51

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 30 ENTER OMPS OMM MAC ADDRESS

11. Enter the Enter OMPs Gateway Ip address window, type


the network gateway IP address of the OMM server, or press
Enter to skip this configuration, as shown in Figure 31.
FIGURE 31 ENTER OMPS GATEWAY IP ADDRESS

12. Enter the Enter OMC Server IP Address address window,


type the IP address of the OMM server, and press Enter, or
press Enter directly to skip this configuration, as shown in
Figure 32.

52

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

FIGURE 32 OMC SERVER IP ADDRESS

13. Enter the Config selection window, type 2, and then press
Enter, as shown in Figure 33.
FIGURE 33 CONFIG SELECTION

14. Enter the Enter OMC IP Address window, type the IP address
of the OMM server, and then press Enter, as shown in Figure
34.

Confidential and Proprietary Information of ZTE CORPORATION

53

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 34 OMM IP ADDRESS

15. Enter the Enter OMC FTPSVR User Name window, type the
default FTP name uep, and then press Enter. Then the Enter
OMC FTPSVR User Password window will pop up, type the
default FTP password uep and press Enter, as shown in Figure
35.
FIGURE 35 FTP CONFIG

16. Enter the Enter OMC FTPSVR File Path window, press Enter
to skip this configuration, and then enter the boot file configuration window.
17. Type the boot file name ompcfgX.ini, in which, the X indicates
the office direction ID of this office, then press Enter, as shown
in Figure 36.

54

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

FIGURE 36 OMPCFG FILE

18. Enter the Config selection window and type 3, as shown in


Figure 37.
FIGURE 37 CONFIG SELECTION

19. Enter the Set OMP Boot Type window, type 0 and then press
Enter, as shown in Figure 38.

Confidential and Proprietary Information of ZTE CORPORATION

55

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 38 OMP BOOT TYPE

20. Enter the Config selection window and then type 4, as shown
in Figure 39.
FIGURE 39 CONFIG SELECTION

21. Enter the Enter Bureau No. window, type the office direction
ID, and then press Enter, as shown in Figure 40.

56

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

FIGURE 40 BUREAU NO.

22. Enter the Config selection window and then type 5, as shown
in Figure 41.
FIGURE 41 CONFIG SELECTION

23. Enter the 3GPlat Boot configuration window, type 0 and


then press Enter, as shown in Figure 42.

Confidential and Proprietary Information of ZTE CORPORATION

57

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 42 3GPLAT BOOT

END OF STEPS
Result

When the OMP starts up automatically, it will download the version


file and the FPGA file from the OMM server. The OMP board runs
normally, and the RUN indicator on the OMP board flashes slowly.

Configuring OMP Global Data


Prerequisites

Before the operation, it is required to confirm:

The OMM server and the local maintenance terminal are installed correctly.

OMP startup parameters are configured.

The MML Terminal window is opened.

Context

After OMP board is started, the OMP global data should be configured to make sure that the foreground/background IP addresses
are in the same network section. For example, the IP of the OMM
server is 192.4.1.1, and the IP of the foreground is 192.168.79.1.
In order to ensure that the IP address of the foreground and that
of the background are in the same network section, it is required
to set the MASK as 255.0.0.0.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Set the global data OMP configuration, the command is SET
OMP.
Table 21 describes the parameters in this command SET OMP.

58

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

TABLE 21 PARAMETERS IN THE SET OMP COMMAND


Name

Meaning

Instructions

OMPIP

OMP
background
IP address

It indicates the valid IP address. Enter


it according to the actual conditions.
The background can access the OMP
through this IP address

MASK

OMP
background
IP mask

Configure the address range of OMP.


Types it according to the real condition

GATEWAY

OMP to OMM
gateway

If there is no gateway, it can be the


sub-network address of OMMSERVER

OMCIP

OMC server
sub network

It indicates the valid IP address. Enter


it according to the actual conditions

Example: Configure the global data OMP information with the


following requirements.

OMP IP address: 192.168.4.1

OMP subnet address to the background IP: 255.255.0.0

Gateway IP address: 192.168.1.1

OMM server IP address: 192.168.79.1

The command is as follows:


SET OMP:OMPIP=192.168.4.1 MASK=255.255.0.0, GATE
WAY=192.168.1.1, OMCIP=192.168.79.1;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Synchronizing All Tables


Prerequisites

Before the operation, it is required to confirm:

The OMM server and the local maintenance terminal are installed correctly.

The MML Terminal window is opened.

Context

To synchronize the data is to send the data saved in the OMM


server to the foreground so that the foreground network element
can obtain the data from the OMM server. Only the admin subscriber can synchronize all the tables.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;

Confidential and Proprietary Information of ZTE CORPORATION

59

ZXWN MSCS Data Configuration Guide(MGCF)

2. Synchronize all the tables. The command is SYNA.


Table 22 describes the parameters in this command SYNA.
TABLE 22 PARAMETERS IN THE SYNA COMMAND
Parameter

Explanation

Instruction

USERNAME

User Name

It is an optional parameter
for designating the name
of the user whose data
are transferred, with a
length ranging from 0 to 50
characters. If it is left blank,
the table data of admin's own
are transferred.

STYPE

Transmission type

Select ALL

It is an optional parameter
for designating the module(s)
to be transferred.

MODULES

Module list

Up to 127 modules can


be selected, which is
represented by a decimal
numeral, and separated
with & (for example,
MODULES=1&3&4).
Empty string indicates all
modules.
It is an optional parameter,
with a default of 600.
Adjust this duration according
to the actual requirements.
Set a longer timeout duration
when the data are large,
otherwise, timeout failure
may occur

TIMEOUT

Response timeout
(100ms)

SAVE

Save when
completed

It is an optional parameter.
Usually the default value YES
is selected.

TOSLAVE

Sync to slave when


completed

It is an optional parameter.
In general, the default value
YES is selected.

Example: Admin synchronization data synchronizes all the tables. The command is as follows.
SYNA:STYPE=ALL,TIMEOUT=600,SAVE=YES,TOSLAVE=Y
ES;
END OF STEPS
Result

60

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

Postrequisite

It is required to restart the OMP board.

Note:
It is required to resynchronize the data for three times and restart
the OMP board for two times. Before the restart, it is required to
confirm whether the synchronized table is saved. The save operation may take three to five minutes. Two methods are available.

Check the disk saving status of the foreground on the OMM


client.

Check whether the usage ratio of the foreground CPU is about


3% with the GetCpu command.

Checking Operations
1. Select Start > Run, then the Run dialog box will pop up.
2. Type CMD and then press Enter to enter the CMD dialog box.
3. Type telnet 192.168.X.1, in which, the X indicates the office
direction ID, and then press Enter.
4. Type the user name zte and the password zte, and then press
Enter for two times, as shown in Figure 43.
FIGURE 43 USER NAME AND PASSWORD

5. Type SCSSHowMcmInfo to check the status of the board and


then press Enter, as shown in Figure 44.

Confidential and Proprietary Information of ZTE CORPORATION

61

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 44 STATUS

The printed status of the board is MASTER and Work, which means
that the OMP board runs normally.

Loading Version Files


Prerequisites

Context

Before the operation, it is required to confirm:

All the tables are synchronized.

The version files of each board are ready.

The foreground and background are correctly connected.

A physical board initially does not load its version files, so you need
to load them manually.
Table 23 lists the board version files.
TABLE 23 BOARD VERSION FILES
Physical
Board
Type

Logical
Board
Type

Version
Type

MPX86_2

RPU

MPX86_2

UIM_2

MNIC_2

Version File Name

Instructions

CPU

MSCS_MPX86_2_RPU
_P4_CS_Z_T.BIN

Version
file of RPU

MP

CPU

MSCS_MPX86_2_MP_
P4_CS_Z_T.BIN

Version
file
of
SMP

UIM

CPU

MSCS_UIM_2_UIM_75
5_CS_Z_T.BIN

Version
file
of
UIMC

CPU

MSCS_MNIC_2_SIG_I
PI_23XX_CS_Z_T.BIN

SIPI
MICROCODE

62

UC_MSCSERVER_MNI
C__2_SIG_IPI_CS__T.
UOF

Confidential and Proprietary Information of ZTE CORPORATION

Version
file
of
SIPI

Chapter 2 Local Office Data Configuration

Physical
Board
Type
SPB_2

MNIC_2

CHUB

CLKG

Steps

Logical
Board
Type

Version
Type

SPB

Version File Name

Instructions

CPU

MSCS_SPB_2_SPB_82
60_CS_Z_T.BIN

Version
file of SPB

CPU

MSCS_MNIC_2_USI_2
3XX_CS_Z_T.BIN

USI

CHUB

Version
file of USI

MICROCODE

UC_MSCSERVER_MNI
C_2_USI_CS__T.UOF

CPU

MSCS_CHUB_CHUB_8
245_CS_Z_T.BIN

Version
file
of
CHUB

It is not
required
to
load
the version files

1. On the NetNumen(TM) M30 MSCS/MGW window, select


Views > Professional Maintenance to enter the Professional Maintenance window.
2. In the left pane, double-click the exchange node in the Professional Maintenance tree. Select Version Management
> Version Mainenance to show the Version Mainenance
tab in the right pane, as shown in Figure 45.
FIGURE 45 VERSION MAINENANCE

3. On the Version Mainenance tab, select the version name


from the Version pull-down list, as shown in Figure 46.

Confidential and Proprietary Information of ZTE CORPORATION

63

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 46 VERSION LIST

4. On the Version Maintenance tab, press down the CTRL key,


and select all the version files (the version files required by
each board are shown in Table 23) required by the foreground
board, as shown in Figure 47.
FIGURE 47 BATCH VERSION LOADING BY DEFAULT

5. Right click the selected version files and select the shortcut
menu Batch Load Default Version. The Switch Process

64

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

window will pop up, which displays the process of the version
file (that is the multicast process).
END OF STEPS
Result

Postrequisite

After the version loading is completed, the board will restart. The
board compares its version files, and obtains its required version
files. After the version files are loaded, the board is in normal
running status. The RUN indicator on the front panel of the board
will flash at 1 Hz.
It is required to synchronize the data.
Verifications
1. Judge whether the board runs normally through the indicators on the panel. Table 24 lists the indicator statuses of each
board.
TABLE 24 BOARD INDICATOR STATUSES
Name

RUN

ACT

ALM

Color

Meanings

Green

RUN
indicator

Green

Active/
standby
indicator

Red

Alarm
indicator

Instruction
Flashing at 5 Hz: the
board is being powered
on.
Flashing at 1 Hz:
the board is running
normally.
On: The board is
active
Off: The board is
standby
On: The board gives
an alarm.
Off: The board gives
no alarm.

Remarks

When all the


indicators on
the board are
ON, probably
the board
hardware
is faulty,
the board
data is not
configured, or
the boot file
of the does
not match the
version files.

2. On the Version Query tab, check whether the version file


number of the board is correct, thus to verify whether the version files are loaded correctly.

Creating MGCF Tones in


Batches
Prerequisites

Before the operation, it is required to confirm:

The tone scripts are loaded.

The MML Terminal window is opened.

Confidential and Proprietary Information of ZTE CORPORATION

65

ZXWN MSCS Data Configuration Guide(MGCF)

Context

Perform this procedure to create the tone-related data on the


MGCF side in batches, including tone ID, service key and its
relation to tone ID and other tone packet configuration.
All the tone packet configurations are created in batches, except
interconnection conversion of external service keys that is configured manually with the ADD SVRTRANSKEY command.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create MGCF tones in batches.
STONE.

The command is BADD

Table 25 describes main parameters in the BADD STONE command.


TABLE 25 PARAMETERS IN THE BADD STONE COMMAND
Parameter
Name

Parameter Description

Instruction

Voice type, includes

TYPE

ALL: All configuration of


tone

ICP: tone service

KD: the relationship


between the call type
and the KD

LANGDES: language
description string

MSGID: external MSGID,


relation to inter service
key

TONEID: the service


tone ID to the protocol
package

TONEIN: service key and


its relation to tone ID

TONEPLAYMT: the
method of playing tones

In general, the
ALL option
is selected,
indicating that all
the tone types are
created in batches.

Example: Create the batch processing of all the MGCF tones.


The specific command is as follows.
BADD STONE:TYPE=ALL;
END OF STEPS
Result

66

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

Office Information
Configuration
Overview
Table 26 shows the office information configuration flow.
TABLE 26 OFFICE INFORMATION CONFIGURATION
Steps

Topic

Instructions

Command

Creating local
signaling point

The local SPC


configuration
includes 14-bit
SPC configuration,
24-bit SPC
configuration and
the upper-layer
user configuration
of MTP3.

ADD OPC

Creating the local


office configuration

Configure some
parameters of the
local exchange,
including the
exchange type,
signaling point
type, MTP3 test
code, and other
parameters.

ADD LOFC

Creating Local Office Signaling Point


Prerequisites

Before the operation, it is required to confirm:

You know the ID of the exchange to be configured.

You know the 14-bit SPC, 24-bit SPC, and the local toll area
code.

The MML Terminal window is opened.

Context

Signaling Point Code (SPC) is a unique code for identifying each


node in the signaling network. The local SPC configuration includes
14-bit SPC configuration, 24-bit SPC configuration and the upperlayer user configuration of MTP3. If the multi-SPC networking is
adopted, it is required to create multiple local signaling points with
different network types.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.

Confidential and Proprietary Information of ZTE CORPORATION

67

ZXWN MSCS Data Configuration Guide(MGCF)

SET:NEID=11;
2. Create the local office signaling point. The command is ADD
OPC.
Table 27 describes the main parameters in the ADD OPC command.
TABLE 27 PARAMETERS IN THE ADD OPC COMMAND
Parameter
Name

Parameter Description

Instruction

NET

The signaling network


where the local office
runs, which has the
same signaling network
type of the adjacent
office configured later.

It is a mandatory
parameter. It ranges
from 1 to 8. In general,
1 is selected.

NAME

User-defined alias

It is a mandatory
parameter, with a length
ranging from 1 to 50
characters.

RC

The toll zone code of the


place where the local
office is located

It is an optional
parameter. Do not
add 0 ahead of an area
code

SPCFMT

Signaling point code


format

It is an optional
parameter. By default,
select TRIPLE_DEC,
which is a three-section
decimal number in
888/383 format.

OPC14

14-bit SPC of local office,


which is provided by the
operator

OPC24

24-bit SPC of local office,


which is provided by the
operator

PREFIX

Dialing prefix

Toll dialing prefix. It is 0


for China.

Protocols supported by
local office

Select the application


types of this signaling
point, not unrelated
subscribers. According
to different network
types, Select H248
User for Mn Interface,
select BICC User, TUP
User, ISUP User for
inter-office signaling
point code.

APPTYPE

68

It is configured
according to the
signaling point planning.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

Parameter
Name

NETAPP

INFO

Parameter Description

Instruction

Network appearance
used in M3UA layer

This field is not used


when the local office
is interconnected with
a TDM office. It is
configured as 0. When
this signaling point is
interconnected with
an IP signaling point
with the same network
type, you need to
negotiate this field with
the opposite end for
consistency.

Identification field used


to configure whether the
network appearance is
effective. Three modes
can be chosen, including
NOUSE, NETAPP and
NONETAPP.

When NOUSE is chosen,


if the NETAPP field is 0,
the network appearance
is ineffective; if the
NETAPP field is not 0,
the network appearance
is effective.
When NETAPP is
chosen, the network
appearance is effective.
When NONETAPP
is chosen, the
network appearance
is ineffective.

TAG

Other attributes

Configure whether the


network corresponding
to the office has the ISNI
function and translation
node.

Example: Create a 24-bit signaling point with the following


requirements.

Direct-associated office: MSCS, CSCF, BGCF

Signaling point type: 24-bit signaling point

SPC: 3.11.1

Application type: ISUP, SCCP, BICC, and TUP

Alias: NET1.

Other parameters: default.

The specific command is as follows.


ADD OPC:NET=1,NAME="NET1",SPCFMT=TRIPLE_DEC,O
PC24="3.11.1",APPTYPE="BICC"&"ISUP"&"SCCP"&"TUP",R
C="25",PREFIX="0",NETAPP=0,INFO=NONETAPP,DMIDX
=0;
Example: Add a 14-bit signaling point that is interconnected
with IM-MGW through Mn interface with the following requirements.

SPC: 1.11.1

Confidential and Proprietary Information of ZTE CORPORATION

69

ZXWN MSCS Data Configuration Guide(MGCF)

Application type: H.248

Alias: NET2

Other parameters: default.

The specific command is as follows.


ADD OPC:NET=2,NAME="NET2",SPCFMT=TRIPLE_DEC,OP
C14="1.11.1",APPTYPE="H.248",RC="25",PREFIX="0",NE
TAPP=0,INFO=NONETAPP,DMIDX=0;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating Local Office Configuration


Prerequisites

Before the operation, it is required to confirm:

The local office signaling point is created.

You know the ID of the exchange to be configured.

The MML Terminal window is opened.

Context

Perform this procedure to configure some parameters of the local


exchange, including the exchange type, signaling point type and
other parameters.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create the local office configuration. The command is ADD
LOFC.
Table 28 describes the parameters in the ADD LOFC command.
TABLE 28 PARAMETERS IN THE ADD LOFC COMMAND
Parameter
Name

Parameter Description
Local office type,
including

LOCAL (Local
Exchange)

It is a mandatory
parameter. Several
options can be selected.

DOMTOLL (National
Toll Exchange)

Configure this parameter


according to actual type.

INTTOLL
(International Toll
Exchange)

OA (In One Area)

In general, select Local


Exchange, National
Toll Exchange and
MGCF Exchange when
MSCS serves as MGCF.

UM (User Telephone)

OFFTYPE

70

Instruction

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 2 Local Office Data Configuration

Parameter
Name

Parameter Description

R2NAT (R2 National


Exchange)

R2INT (R2
International
Exchange)

MGCF (MGCF
Exchange)

Instruction

Network type

It is a mandatory
parameter for
designating the network
type ID of the local
office. In this case,
one network type is
configured.

Sequence in area

It is a mandatory
parameter with a default
of 0, ranging from 0 to
255.

TCODE

Test code

It is an optional
character-type
parameter with a
length not more than
15 characters. This
parameter can contain
0~9, *, and #, with a
default of 1234

SPTYPE

Signaling point type,


including SEP, STP, and
STEP

NET

SEQ

RESTART

Signaling point restart

It is an optional
parameter.
Select STEP
It is an optional
parameter, with a default
of YES. The default
value indicates that this
function is enabled

Languages of the office,


including:

LANG

DEFAULT

FRENCH

ENGLISH

GERMAN

RUSSIAN

SPAISH

The default value is


DEFAULT.

Confidential and Proprietary Information of ZTE CORPORATION

71

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter Description

Instruction

RSTTIME

Reset Time(ms)

The restart time when


the signaling point used
as STIP (the unit is
ms). It is an integral
parameter, ranging
from 100 to 59900, the
default value is 10000.

NAME

Alias

Not more than 50


characters. It is the
name customized by a
user for easy memory.

Example: Configure the local exchange with the following requirements.

Office type: LOCAL&DOMTOLL&MGCF

Network type No.: 1

Signaling point type: STEP

Other parameters: Default.

The command is as follows:


ADD
LOFC:OFCTYPE="LOCAL"&"DOMTOLL"&"MGCF",NET
=1,SEQ=0,TCODE="1234",SPTYPE=STEP,LANG=DEFAUL
T,RESTART=YES,RSTTIME=10000,T19=68,T20=60,T21
=64;
END OF STEPS
Result

72

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

Resource Configuration
Table of Contents
Resource Planning .............................................................73
Configuring Resource Attributes...........................................73

Resource Planning
It is very important to make the overall resource planning in advance no matter whether common networking, region-system networking, or dual-homing networking is adopted.
The basic principle of resource allocation is as follows:
1. Do not add unused resources in the resource management system.
For example, if it is not required to configure the SIP called
number analysis selector, do not configure the corresponding
resources.
2. Allocate the required resources on a basis of sections to avoid
too separate resource allocation.
For example, when the Office ID resource is allocated to 5
areas, each area is allocated with 100*N adjacent office IDs.
Each section has 100 adjacent office IDs, and N can be different
in different areas.
3. Add moderate surpluses for required resources, and do not use
up them.
For example, if the Office ID resource is allocated to 5 areas,
do not allocate all 2048 adjacent office IDs, except that each
area really has 400 adjacent offices to be configured. If the
Office ID resource in one area is insufficient after a period of
time, separately allocate one section of (100) adjacent office
IDs to this area.

Configuring Resource
Attributes
Prerequisites

Before the operation, it is required to confirm:

Confidential and Proprietary Information of ZTE CORPORATION

73

ZXWN MSCS Data Configuration Guide(MGCF)

Context

The overall resource planning is made.

The MML Terminal window is opened.

The MGCF has authority-division and area-division function, so it


is required to allocate different resource attributes for different
areas before configuring the data. If the area is not divided, all
the resource attributes can be configured in the common area.
Table 29 lists the resource types, key fields and value ranges in
the MGCF resource management system.
TABLE 29 RESOURCE TYPES, KEY FIELDS AND VALUE RANGES OF
THE MGCF
Configuration Items

Resource
Types

Key Fields

Minimum

Maximum

Office data
configuration

Adjacent
office

Office ID

3000

Signaling
linkset

Link set No.

1024

Signaling
route

Signaling
route No.

2000

SCTP

SCTP ID

2048

ASP

ASP ID

2048

AS

AS ID

640

M3UA static
route

M3UA
static route
ID

640

Node
Topology
Config

Topology
node ID.

2048

Voice Codec
Template

Template
ID

255

Trunk group

Trunk
group
number

4000

Outgoing
route

Route No.

20000

Outgoing
route set

Route set
No.

3000

Outgoing
route chain

Route
chain ID

3000

Chain analysis

Chain
analysis
index

3000

Protocol configuration

Topology
configuration

Trunk routing configuration

74

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 3 Resource Configuration

Configuration Items

Number
analysis

Access configuration

Service configuration

Steps

Resource
Types

Key Fields

Minimum

Maximum

Automatic
Re-routing
Route Set

Re-routing
route set

1000

Number
Pre-analysis
Selector

Number
Preanalysis
Selector

1000

Number
Analysis
Entrance

Number
Analysis
Entrance

1000

Number
Analysis
Selector

Number
Analysis
Selector

4096

Template
of Number
Analysis
Selector

Template
of Number
Analysis
Selector

65535

Number
Transform
Index

Number
Transform
Index

2048

Black White
List Selector

Black
White List
Selector

1000

SIP Called
Number
Analysis
Selector

Selector

1000

Location Area

Location
Area ID

65534

Emergency
Call Center
Index

Emergency
call center
index

255

Welcome
Messages

Welcome
Message
Code

128

Camel Access
Subscription
Information

Camel Information Index


Number

255

1. On the NetNumen (TM) M30 window, select menus Views


> Resource Management, and the Resource Management
window appears, as shown in Figure 48 .

Confidential and Proprietary Information of ZTE CORPORATION

75

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 48 AREA TREE

2. In Area Tree, right click the area where resources need to


be added under the MSCS. Click the shortcut menu Add resource, as shown in Figure 49.
FIGURE 49 ADDING RESOURCES

3. The Add Resource dialog box appears, as shown in Figure 50.


The parameter description is shown in Table 29.

76

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 3 Resource Configuration

FIGURE 50 RESOURCE ADDING DIALOG BOX

4. Select the resource type to be added from the field Resource


Type drop-down list box, and input the corresponding parameters. Click the Add button, and the added resource is displayed
in the resource list.
5. After all kinds of required resource types are configured, click
the Confirm button to exit the resource configuration.
END OF STEPS
Result

Resource types display on the Resource Management window.

Confidential and Proprietary Information of ZTE CORPORATION

77

ZXWN MSCS Data Configuration Guide(MGCF)

This page is intentionally blank.

78

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

MGCF-IM-MGW
Interconnection Data
Configuration
Table of Contents
Overview..........................................................................79
Interface IP Address Configuration .......................................81
BFD Configuration (Optional) ..............................................87
Creating a Static Route ......................................................90
Adjacent Office and Topology Configuration ...........................92
SIGTRAN Configuration .................................................... 106
H.248 Configuration......................................................... 119

Overview
Description

Mn interface is the interface between MGCF and IM-MGW. It


usually adopts the IP bearer, and its protocol stack adopts the
BICC/M3UA/SCTP/IP mode.

Configuration
Flow

Figure 51 shows the flow of configuring the interconnection data


between MGCF and IM-MGW.

Confidential and Proprietary Information of ZTE CORPORATION

79

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 51 FLOW OF MGCF-IM-MGW INTERCONNECTION


CONFIGURATION

Description

The flow of MGCF-IM-MGW interconnection data is shown in Table


30.
TABLE 30 FLOW DESCRIPTION

80

Steps

Operations

Procedures

Interface IP address
configuration

According to the IP address planning


, configure the loopback interface
address, SIPI interface address, and
USI interface address.

BFD configuration
(optional)

BFD parameters are configured


when load-sharing networking mode
is adopted. BFD is not required for
active/standby networking mode.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Steps

Operations

Procedures

Creating static route

It is configured when the service IP


address of local signaling plane and
PE interface address are not in the
same network section .

Adjacent office and


topological node
configuration

It is to create adjacent office and


topological node .

SIGTRAN configuration

It is configured when IP bearer is


adopted.

H.248 configuration

It is only configured for Mn/Mc


interface.

Interface IP Address
Configuration
Overview
Interface IP addresses are planned according to the actual networking applications. The IP address of Nc, Mj/Mg interfaces can
be configuration independently, or share with the Mn interface address.
Table 31
TABLE 31 INTERFACE IP ADDRESS CONFIGURATION
Steps

Operations

Instruction

Creating a Loopback Interface

Create the service address on


the RPU loopback
port.

Creating an SIPI
Interface
Address

Create IP address to some


physical port of
this SIPI board

Creating a Virtual
Interface
Address

Create
a
virtual interface address. MGCF is
interconnected
to a SIP office
through its virtual interface.

Command
INTERFACE
LOOPBACK
ADD IP ADDRESS

INTERFACE
ADD IP ADDRESS

INTERFACE
ADD IP ADDRESS

Confidential and Proprietary Information of ZTE CORPORATION

81

ZXWN MSCS Data Configuration Guide(MGCF)

Creating a Loopback Interface


Prerequisites

Before the operation, it is required to confirm:

The RPU module configuration is completed, and the RPU works


normally.

The MML Terminal window is opened.

Context

Configuring the loopback interface means configuring the service


address on the RPU loopback port. Since the service address of
Mc interface can use ports 1 and 2, it is recommended that each
port is configured with one IP address.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Enter the RPU loop back interface. The command is INTERF
ACE LOOPBACK.
Port represents the port number, ranging from 1 to 128.
Example: Enter the loop-back interface whose port number is
1.
The command is as follows.
INTERFACE LOOPBACK:PORT=1;
3. Create the loopback interface address. The command is ADD
IP ADDRESS.
Table 32 describes the main parameters in the ADD IP ADDRESS command.
TABLE 32 PARAMETERS IN THE ADD IP ADDRESS COMMAND
Parameter
Name

Parameter
Description

Instruction

IP

IP address

It is a mandatory
parameter. The IP address
of the loop-back address.

MASK

Mask

It is a mandatory
parameter of 32-bit.
In general, it is
255.255.255.255.

BROADCASTIP

Broadcast address

It is an optional
parameter. In general, it
is 255.255.255.255.

Example: Create a loop back address with the following requirements.

82

IP address: 192.168.11.11

Subnet mask: 255.255.255.255.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

The command is as follows.


ADD IP ADDRESS:ADDRESS="192.168.11.11",MASK="255
.255.255.255",BROADCASTIP="255.255.255.255";
4. Save the online configured data. Otherwise, these will loss
when the RPU is restarted. The command is SAVE ONLINED
ATA;.
5. Exit the interface configuration mode. The command is EXIT;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating an SIPI Interface Address


Prerequisites

Before the operation, it is required to confirm:

The SIPI unit is created.

The MML Terminal window is opened.

Context

MGCF is interconnected to IM-MGW on the CE through its SIPI


board. The online configuration of SIPI board interface is to assign
an IP address to some physical port of this SIPI board.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Enter the SIPI board interface configuration mode. The command is INTERFACE.
Table 33 describes the main parameters in the INTERFACE
command.
TABLE 33 INTERFACE REAL INTERFACE
Parameter
Name

Parameter
Description

Instruction

SUBSYSTEM

Subsystem ID

It is a mandatory parameter.
Select the default value 0.

MODULE

Module No.

It is a mandatory parameter.
Select the default value 1.

Unit No.

It is a mandatory parameter. It
is the unit number of the real
interface. Select the unit number
of the board corresponded by the
interface.

UNIT

Confidential and Proprietary Information of ZTE CORPORATION

83

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

SUNIT

Subunit No

It is a mandatory parameter. Real


interfaces sub-unit number fixedly
adopts 1.

Port number

It is a mandatory parameter. The


port number refers to the network
interface serial number of the
SIPI rear board for connecting to
the external. The four network
interfaces are numbered 1 to 4
from top to bottom. Only the first
port is used.

PORT

Example: Enter the interface address of SIPI board. The configuration requirements are as follows.

Unit number: 321

Sub-unit number: 1

Port number: 1

Home module number: No.1 OMP module.

The command is as follows.


INTERFACE:SUBSYSTEM=0,MODULE=1,UNIT=321,SUNI
T=1,PORT=1;
3. Create the interface address of the SIPI. The command is ADD
IP ADDRESS.
Table 34 describes the main parameters in the ADD IP ADDR
ESS command.
TABLE 34 PARAMETERS IN THE ADD IP ADDRESS COMMAND
Parameter
Name

Parameter
Description

Instruction

IP

IP address

It is a mandatory parameter.
The Mn interface address of SIPI
board

MASK

Subnet mask

It is a mandatory parameter. The


real interface subnet address of
corresponding interface board

BROADCASTIP

Broadcast
address

It is an optional parameter,
corresponding to the broadcast
address of the real address of the
corresponding interface board.

Example: Create the interface address of the SIPI. The configured parameters are as follows.

IP address: 192.168.1.11

Subnet mask: 255.255.255.248

Broadcast address: 255.255.255.255.

The command is as follows.

84

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

ADD IP ADDRESS:ADDRESS="192.168.1.11",MASK="255.
255.255.248",BROADCASTIP="255.255.255.255";
4. Save the online configured data. Otherwise, these will loss
when the RPU is restarted. The command is SAVE ONLINED
ATA;.
5. Exit the interface configuration mode. The command is EXIT;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating a Virtual Interface Address


Prerequisites

Before the operation, it is required to confirm:

Physical configuration of SMP module is completed.

The MML Terminal window is opened.

Context

MGCF is interconnected to a SIP office through its virtual interface.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Enter the virtual interface configuration mode. The command
is INTERFACE.
Table 35 describes the main parameters in the INTERFACE
command.
TABLE 35 INTERFACE VIRTUAL INTERFACE
Parameter
Name

Parameter
Description

Instruction

SUBSYSTEM

Subsystem ID

It is a mandatory parameter.
The changeless value for virtual
address is 255.

MODULE

Module No.

It is a mandatory parameter.
Select the SMP which processes
the IP signaling.

UNIT

Unit No.

It is a mandatory parameter.
The changeless value for virtual
address is 65535.

SUNIT

Subunit No

It is a mandatory parameter.
The changeless value for virtual
address is 255.

Confidential and Proprietary Information of ZTE CORPORATION

85

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

PORT

Port number

It is a mandatory parameter.
The changeless value for virtual
address is 65530.

Example: Enter the vitual interface address. The configuration


requirements are as follows.

Subsystem number: 255

Module number: 3

Unit number: 65535

Sub-unit number: 255

Port number: 65530

The command is as follows.


INTERFACE:SUBSYSTEM=255,MODULE=3,UNIT=65535,S
UNIT=255,PORT=65530;
3. Create a virtual interface address. The command is ADD IP
ADDRESS.
Table 36 describes the main parameters in the ADD IP ADDRESS command.
TABLE 36 PARAMETERS IN THE ADD IP ADDRESS COMMAND
Parameter
Name

Parameter
Description

Instruction

IP

IP address

It is a mandatory
parameter. The IP address
of the virtual interface
address.

MASK

Mask

It is a mandatory
parameter of 32-bit.
In general, it is
255.255.255.255.

BROADCASTIP

Broadcast address

It is an optional
parameter. In general, it
is 255.255.255.255.

Example: Create a virtual address with the following requirements.

IP address: 10.1.44.77

Subnet mask: 255.255.255.255.

Broadcast address: 255.255.255.255

The command is as follows.


ADD IP ADDRESS:IP="10.1.44.77",MASK="255.255.255.2
55",BROADCASTIP="255.255.255.255";

86

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

4. Save the online configured data. Otherwise, these will loss


when the RPU is restarted.The command is SAVE ONLINEDA
TA;.
5. Exit the interface configuration mode. The command is EXIT;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

BFD Configuration
(Optional)
Overview
Definition

Bidirectional Forwarding Detection (BFD) can greatly accelerate


the fault detection speed and enhance the recovery function. Currently, EFD function is mainly used to quickly detect the link status of soft-switching equipment. It can not only find the link fault
quickly, but also inform the equipment that initiates this detection
to handle this fault.

BFD Function
Configuration

In general, BFD function is configured in the load-sharing networking mode. One interface is configured with a BFD session.
Steps

Operation

Instruction

Command

Create a BFD
authentication

The BFD authentication


entry is configured only
when the authentication
to the BFD session is
required.

ADD BFD
AUTH

Create a BFD
session

Configure the mapping


relationship between the
real address of the local
SIPI interface board and
the router interface.

ADD BFD
SESSION

Creating BFD Authentication


Prerequisites

Before the operation, it is required to confirm:


The MML Terminal window is opened.

Context

The BFD authentication is created only when the authentication to


the BFD session is required.

Confidential and Proprietary Information of ZTE CORPORATION

87

ZXWN MSCS Data Configuration Guide(MGCF)

Note:
Authentication type and Key of both ends must be consistent.
Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create BFD authentication. The command is ADD BFD AUTH.
Table 37 describes the parameters in the ADD BFD AUTH command.
TABLE 37 PARAMETERS IN THE ADD BFD AUTH COMMAND
Parameter
Name

Parameter
Description

Instruction

AUTHTYPE

Authentication
type

It is a mandatory parameter
including SIMPLE, MD5,
METIC_MD5, SHA1, and
METIC_SHA

AUTHKEYID

Authentication
ID

It is a mandatory parameter. Type


an integer within 1~255.

KEY

KEY

It is a mandatory parameter.
Enter it according to different
authentication types.

Example: Create BFD authentication with the following requirements.

Authentication type: SIMPLE

Authentication ID: 1

KEY: 1.

The command is as follows:


ADD BFD AUTH:AUTHTYPE=SIMPLE,AUTHKEYID=1,KEY
="1";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating a BFD Session


Prerequisites

Before the operation, it is required to confirm:


The MML Terminal window is opened.

88

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Context

Perform this procedure to configure the mapping relationship between the real address of the local SIPI interface board and the
router interface.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create BFD session. The command is ADD BFD SESSION.
Table 38 describes the parameters in the ADD BFD SESSION
command.
TABLE 38 PARAMETERS IN THE ADD BFD SESSION COMMAND
Parameter
Name

Parameter
Description

Instruction

SRCIP

Local address of
BFD session

It is a mandatory
parameter. Types the
interface address of SIPI.

DSTIP

Remote address of
BFD session

It is a mandatory
parameter. Types
the address of the
corresponding router

Multi hop flag

It is a mandatory
parameter. Includes
SINGLE_HOP and
MULTIHOP. In general,
select SINGLE_HOP

MULTIHOP

DESMINTXINTVAL

Min-transmit
interval (ms)

REQMINRXINTVAL

Min-receive
interval (ms)

DETECTMULT

Detect
accumulator

It is an optional parameter,
ranging from 100000 to
10000000.
The router produced by
different manufacturers is
configured with different
values.
Both ends of the BFD
session should be
consistent.
It is an optional parameter.
Type an integer ranging
from 2 to 255.
The recommended value is
2

OPTMODE

Work mode

It is an optional parameter.
Select ASYNCHRONOUS

AUTHID

Authentication ID

The parameter ranges from


1 to 255

CHGOVER

Change Over

YES can be selected

Confidential and Proprietary Information of ZTE CORPORATION

89

ZXWN MSCS Data Configuration Guide(MGCF)

Example: Create the BFD session when SIPI interface board is


connected with the router. The requirements are as follows.

Local address of BFD session: 10.0.74.4

Remote address of BFD session: 10.0.74.1

Single hop flag: SINGLE_HOP

Working mode: Asynchronous.

The command is as follows:


ADD BFD SESSION:SRCIP="10.0.74.4",DSTIP="10.0.74.1
",MULTIHOP=SINGLE_HOP,DESMINTXINTVAL=100000,R
EQMINRXINTVAL=100000,DETECTMULT=3,OPTMODE=A
SYNCHRONOUS;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating a Static Route


Prerequisites

Before the operation, it is required to confirm:

The interface address is created.

The BFD parameters are created when load-sharing networking


mode is adopted.

The MML Terminal window is opened.

Context

Static route is created when the service IP address of local signaling plane and PE interface address are not in the same network section. Under the active/standby working mode, a destination address needs to be configured with a route only. Under the
load-sharing working mode, a destination address usually needs
to be configured with two routes.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a static route. The command is ADD IP ROUTE.
Table 39 describes the parameters in the ADD IP ROUTE command.

90

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

TABLE 39 PARAMETERS IN THE ADD IP ROUTE COMMAND


Parameter
Name

Parameter
Description

NETPRE

Net prefix

MASK

Mask

Instruction

It is a mandatory parameter.
Type the network section of the
opposite-end equipment service
address according to the network
planning. Its prefix should match
its mask

NEXTHOP

Next hop IP

It is an optional parameter,
indicating the router interface
address (VRRP address). Type the
gateway address to the opposite
end office

DISTANCE

Distance

It is an optional parameter with a


default of 1, ranging from 1 to 254

BFDDETECT

Enable BFD
Detect

It is an optional parameter. In
general, select NO. Only when next
hop is IP address, BFDDETECT
option is in effect

Example: Create the static route to the opposite end with the
following requirements.

Working mode: active/standby mode

Service address of the opposite equipment: 11.11.11.1

Mask: 255.255.255.0

Next hop IP: 10.0.74.1.

The command is as follows:


ADD IP ROUTE:NETPRE="11.11.11.1",MASK="255.255.
255.0",NEXTHOP="10.0.74.1",DISTANCE=1,BFDDETECT
=NO;
Example: Create two static routes to the opposite end with the
following requirements.

Working mode: load-sharing mode

Service address of the opposite equipment: 11.11.11.1

Mask: 255.255.255.0

Next hop IP: 10.0.74.1 and 10.0.74.2.

The command is as follows:


ADD IP ROUTE:NETPRE="11.11.11.1",MASK="255.255.
255.0",NEXTHOP="10.0.74.1",DISTANCE=1,BFDDETECT
=NO;
ADD IP ROUTE:NETPRE="11.11.11.1",MASK="255.255.
255.0",NEXTHOP="10.0.74.2",DISTANCE=1,BFDDETECT
=NO;
END OF STEPS

Confidential and Proprietary Information of ZTE CORPORATION

91

ZXWN MSCS Data Configuration Guide(MGCF)

Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Adjacent Office and


Topology Configuration
Overview
Introduction

Adjacent office configuration means configuring the neighboring


office of the local office. There are two association modes, direct
association and quasi-association.
If the adjacent office is regarded as a node in the whole network
topology when the local office is in the center, topological node
configuration means adding the topological node of its adjacent
office in the local office. The topological nodes configured on MGCF
include IM-MGW, CSCF, BGCF, MGCF, and MSCS.
Table 40 shows adjacent office and topology configuration.
TABLE 40 ADJACENT AND TOPOLOGY CONFIGURATION
Steps

Operation

Instruction

Creating an
MGW adjacent office

Create the basic information of MGW


adjacent office.

ADD ADJOFC

Creating an
MGW voice
CODEC template

Create the encoding


and decoding speech
type modules supported by IM-MGW.

ADD CODECTPL

Creating
topology
node

Create the topology relationship between MGCF node


and IM-MGW node.

ADD TOPO

Creating inter-MGW
bear mode
(optional)

The
inter-MGW
bearer mode is configured when the Nb
interfaces between
several
IM-MGWs
under
the
same
MGCF are connected.

ADD
MOD

Command

MGWBEAR

Creating an IM-MGW Adjacent Office


Prerequisites

92

Before the operation, it is required to confirm:

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

The physical IP connection between the MGCF and the IM-MGW


is clear, which is implemented by the connection between the
FE1 interfaces on the rear board of the SIPI boards of these
two NEs.

The signaling interworking data is planned and negotiated.

The basic configuration of the local office is completed.

The range of adjacent office number is configured in the resource management.

The MML Terminal window is opened.

Context

Perform this procedure to configure the basic information of


IM-MGW adjacent office.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create an IM-MGW adjacent office.
ADJOFC.

The command is ADD

Table 41 describes the main parameters in the ADD ADJOFC


command.
TABLE 41 PARAMETERS IN THE ADD ADJOFC COMMAND
Parameter
Name

Parameter
Description

Instruction

ID

Office ID

A mandatory parameter,
indicating the identification
number of the adjacent
office, and ranging from 1
to 3000. In general, it is
configured as the exchange
ID of the adjacent office
during the all-network
planning

NAME

User-defined alias

It is a mandatory parameter.
Type a customized name

Network type

A mandatory parameter,
indicating the network
type of the SPC used for
connecting the local office
to the adjacent office when
the local office is configured
with several SPs. The
default is the network type
of this SP when there is only
one SP in the local office

The type of adjacent


office

It is a mandatory parameter.
Select MGW for the
IM-MGW bearing H.248
signaling. Select SGW for
another IM-MGW office

NET

OFCTYPE

Confidential and Proprietary Information of ZTE CORPORATION

93

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

SPCFMT

SPC format

Select TRIPLE_DEC

SPCTYPE

SPC type

DPC

Destination SPC

RC

Area code

It is a mandatory parameter.
Select it based on the SPC
type of the adjacent office
according to the signaling
point planning. In China,
all the NEs adopt the 24-bit
SPC
It is an optional parameter,
indicating the local toll zone
code of the adjacent office.
This parameter has impact
on the area code added by
the calling number

Association type,
including:

AM_SURE
(direct
connection mode)

AM_QUASI (half
direct connection
mode)

AM_NONE (none
connection mode)

ASSOTYPE

SPTYPE

Signaling point type,


including SEP, STP
and STEP

It is an optional parameter.
Select AM_SURE

It is an optional parameter.
Select SEP (signaling end
point) for the IM-MGW
bearing H248 signaling.
Select STEP (signaling
transition /end point) for
another IM-MGW office

Subservice function,
including

INTERNATIONAL (International signaling


point code)

INTERNATIONAL
STANDBY (International
standby signaling point code)

SSF

94

NATIONAL
(National
signaling point
code)

NATIONAL
STANDBY
(National standby
signaling point
code).

Confidential and Proprietary Information of ZTE CORPORATION

It is an optional parameter.
In general, NATIONAL is
selected at home.

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction

Office Attribute,
including:
ISNI (Has ISNI
Function)

TAG

TRANS (Translate
Node)

It is an optional parameter

TEST (Need Test


Info:0X02/0X01)

TEST

Test flag

It is an optional parameter.
It is used to set whether the
MTP3 link actively initiates
the link test after entering
the service status. In most
cases, this parameter is
selected.
It is an optional parameter
with a default of NO. It
is used for SCCP to judge
whether to use the LUDT
message.

BANDFLAG

Broadband attribute

The maximum length of a


broadband link message
is 4,000, and that of a
narrowband link message
is 255. Because the MTP
layer does not have the
segmentation function, the
incorrect configuration of
this parameter probably
causes the long packet to
be discarded.
Select YES when all the
links between two SPs are
SIGTRAN or ATM signaling
links.

Protocol Type,
including:

CHINA (China)

ITU (International Telecommunications


Union)

ANSI (American
National
Standards
Institute)

PRTCTYPE

It is an optional parameter.
The CHINA and the ITU are
used for the NO.7 signaling
networking of the ITU
standard and the ANSI is
used for the NO.7 signaling
networking of the American
standard. In general, select
CHINA for the domestic
office and select ITU for the
international office

Confidential and Proprietary Information of ZTE CORPORATION

95

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

CLST

Parameter
Description

Instruction

Cluster ID

It is an optional parameter
within 0~65535. In
general, select the default
value 65535. It is valid
when the protocol type
of the adjacent office is
ANSI. The signaling point
connected to the signaling
transfer point belongs to the
corresponding cluster. The
cluster ID is configured in
the command ADD CLST

Office Info, including:


CIC_PCM (CIC starts
the load sharing
according to the PCM
code mode)
BLOCK (Manual block
status)

INFO

EVEN_CIC (The
office controls the
even CIC when CIC
resource contention
occurs)

It is an optional parameter
and the default value is
CIC_PCM

CALLING ( Calling
transform is allowed)
CALLED (Called
transform is allowed)
MOD24_CIC (CIC
mode with 24 mode)
TEST (Dynamic
observation)
RELATEDOFC1

Related Office ID

It is an optional parameter
ranging from 0 to 3000

Office Extend Info,


including:

INFOEX

96

SIGBRDCST
(Support Signa
ling Broadcast
Message)

MTP (Hongkong
MTP Standard)

DUPU ( Screen
DUPU message)

SUA_REC_DT1
(Receive SUA
message and
handle it as DT1
message)

SUA_SND_DT1
(Send SUA
message and
handle it as DT1

Confidential and Proprietary Information of ZTE CORPORATION

It is an optional parameter

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction

message without
SN.)

OPEN_TG_RES
(Open outter
trunk group
resource)

For example, create an IM-MGW adjacent office. The office ID


is 101, the alias is MGW1, and the destination SPC is 1.31.1.
For other parameters, adopt the default value. The command
is as follows:
ADD ADJOFC:ID=101,NAME="IM-MGW1",NET=2,OFCTYP
E=MGW,SPCFMT=TRIPLE_DEC,SPCTYPE=14,DPC="1.31.1
",RC="25",ASSOTYPE=AM_SURE,SPTYPE=SEP,SSF=NATIO
NAL STANDBY,SUBPROTTYPE=DEFAULT,TEST=YES,BAND
FLAG=YES,PRTCTYPE=CHINA,CLST=65535,INFO="CIC_P
CM",RELATEDOFC1=0;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating an MGW Voice CODEC


Template
Prerequisites

Before the operation, it is required to confirm:

The basic configuration of the local office is completed.

The range of the MGW encoding and decoding speech template


numbers is configured in the resource management configuration.

The MML Terminal window is opened.

Context

Perform this procedure to configure the encoding and decoding


speech type modules supported by MGW. In general, MSCS is configured with a default common encoding and decoding speech template.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create the MGW voice CODEC template. The command is ADD
CODECTPL.
Table 42 describes the main parameters in the ADD CODEC
TPL command.

Confidential and Proprietary Information of ZTE CORPORATION

97

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 42 PARAMETERS IN THE ADD CODECTPL COMMAND


Parameter
Name

Parameter
Description

Instruction

ID

Template
number

It is a mandatory parameter
for defining an encoding and
decoding speech template,
ranging from 1 to 255.

GRPID

The group
number of the
speech coding.

It is a mandatory parameter for


specifying the OID format and
encoding and decoding type list.
Up to eight types can be defined
in an encoding and decoding
template.

VALFG

Valid option,
including YES
(valid) and NO
(invalid)

It is a mandatory parameter for


setting whether this encoding
and decoding speech template is
valid.
Select YES
It is a mandatory parameter for
specify an Organization Identifier
(OID).
It has the following parameters.

OID

OID

OID_NONE: No OID

OID_ITU_T: ITU_T

OID_ETSI: ETSI

OID_IETF: IETF

ITYPE

ITU_T CODEC
type

It is an optional parameter. In
general, ITUT_G711A_64 is
selected.

ETYPE

ETSI CODEC
type

It is an optional parameter. In
general, ETSI_UMTS_AMR
and ETSI_UMTS_AMR_2 are
selected.

ACTRATE

Activated
CODEC rate

It is an optional parameter. In
general, the default value is
selected

SUPRATE

Supported
CODEC rate

It is an optional parameter. In
general, the default value is
selected

OM

ACS optimized
mode

It is an optional parameter. In
general, the default value is
selected

Example: Configure an MGW encoding and decoding speech


template with the following requirements.

98

Template ID: 1

CODEC group number: 1

Valid option: YES

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

OID: ETSI

ETSI CODEC type: ETSI_UMTS_AMR2

Activated CODEC rate: 5.90 K and 6.70 K

Supported CODEC rate: 5.90 K and 6.70 K

ACS optimize mode: Yes.

ADD
CODECTPL:ID=1,GRPID=GRPID1,VALFG=YES,OID
=OID_ETSI,ETYPE=ETSI_UMTS_AMR_2,ACTRATE="Rate59
0"&"Rate670",SUPRATE="Rate590"&"Rate670",OM=YES;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating a Topology Node


Prerequisites

Context

Before the operation, it is required to confirm:

The encoding and decoding speech template is configured.

The range of the topological node number is configured in the


resource management.

The MML Terminal window is opened.

Perform this procedure to configure the topology relationship between MGCF node and IM-MGW node. This command is used to
configure the adjacent NE information, including equipment type,
bearer type and attributes, user plane version, encoding and decoding template, and other information.
For Mn interface, only the adjacent office bearing H.248 protocol
is configured as a topological node.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create an IM-MGW topological node. The command is ADD
TOPO.
Table 43 describes the main parameters in the ADD TOPO
command.

Confidential and Proprietary Information of ZTE CORPORATION

99

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 43 PARAMETERS IN THE ADD TOPO COMMAND


Parameter
Name

ID

OFCID

Parameter
Description

Topological node
ID

Office ID

Instruction
It is a mandatory parameter to
define ID of this node, ranging
from 1 to 2,048.
It is recommended that the ID
and office No. of a topological
node are consistent
It is a mandatory parameter
for specifying the office ID of
this topological node. This
parameter must be defined by
the ADD ADJOFC command
first.
In this case, type the actual
IM-MGW office number

NAME

CODECID

ETYPE

Alias

It is a mandatory parameter
for naming this topological
node, with a length ranging
from 1 to 50 characters.

CODEC identity

It is a mandatory parameter
for specify the CODEC
template used by this
topological node. This
parameter must be defined
by the ADD CODECTPL
command first.

Equipment type

This parameter is used to


specify the NE type of this
topological node.
Select R4GW for an MGW
node

PROTTYPE

IPVER

ATTR

Protocol type

Select H.248 for Mn interface.

IP version of the
node

It is the IP protocol version


supported between nodes.
Select IPV4 or IPV6
according to the actual
conditions. Currently, IPV4 is
supported.

Bearer attributes

This parameter is only valid


for the node with the type
of R4GW (MGW). The bearer
types supported by MGW
are BNCAAL1, BNCAAL2,
BNCAAL1S, BNCIPRTP,
and BNCTDM. MGW can one
or more of these types of
bearers.
In general, select BNCAAL2,
BNCIPRTP, and BNCTDM

100

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Parameter
Name

Parameter
Description

UPVER

User plane
protocol version
of RNC or MGW
Extended
attributes (tunnel
mode), including:

NOTUNL
(None tunnel
mode)

RTUNL
(Rapid tunnel
mode)

ATTR2

DTUNL
(Delay tunnel
mode)

Signaling transfer
mode, including:
TRFMOD

MCINTF (Mc
interface signal
transfer mode)

Instruction
This parameter is used to set
the user plane version of this
node.
In general, select V2

This parameter is used to set


which tunnel mode is adopted
for bearer establishment when
this node supports the IP/RTP
bearer. The default value is
NOTUNL (None tunnel mode).
In general, select DTUNL
(Delay tunnel mode) for an
MGW topological node.

This parameter is used to set


which mode is used by the
topology for reporting when
it detects CNG or CED fax
signals.
The default value is MCINTF

Error SDU
control, including
options:

UPERRCTRL

YES: The user


plane entity implements error
inspection, and
sets the FQC bit
position according to the result.
It will transmit
all frames includes the error
frames to the
user plane layer.
During a call, the
error packet control parameter
delerrsdu=Yes,
which is delivered
by the terminal
established by
MGW on the Mc
interface. The
error packet control parameter
deliveryOfErroneousSDU is YES,
NA, NA during
RAB assignment.

This parameter regulates the


handling method of the user
plane for error frames. It is
only valid for MGW-type and
RNC-type topological node.
The default value is YES

NO: The user


plane entity implements the
error inspection.

Confidential and Proprietary Information of ZTE CORPORATION

101

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description
It will directly
discard the error
frame. During
a call, the error packet control parameter
delerrsdu=No,
which is delivered
by the terminal
established by
MGW on the Mc
interface. The
error packet control parameter
deliveryOfErroneousSDU is NO,
NA, NA during
RAB assignment.

Instruction

INVALIDTION:
The user plane
entity does not
implement the
error inspection.
During a call, the
error packet control parameter
delerrsdu=NA,
which is delivered
by the terminal
established by
MGW on the Mc
interface. The
error packet control parameter
deliveryOfErroneousSDU is NA,
NA, NA during
RAB assignment.

DTMFTC

Tandem office
send DTMF
use TC mode,
including two
options, NO and
YES

This parameter is used to set


whether the tandem office
uses the TC resources during
DTMF number delivery.
The default value is NO
It contains the following
options.

MGWCON

MGW congestion
reporting
capability

SMGWCON (Standard
MGW congestion event)

CMGWCON (Custom MGW


congestion event).

The default value is


SMGWCON.

Example: Create a topological node with the following requirements.

102

MGW office ID: 101

Equipment type: R4 gateway

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Protocol type: H248

Supported user plane protocol version: V2

CODEC ID: 1.

The specific command is as follows.


ADD TOPO:ID=101,OFCID=101,NAME="IM-MGW101",CO
DECID=1,ETYPE=R4GW,PROTTYPE=H248,IPVER=IPV4,A
TTR="BNCAAL2"&"BNCIPRTP"&"BNCTDM",UPVER="V2",ATT
R2=NOTUNL,TRFMOD=MCINTF,UPERRCTRL=YES,DTMFTC
=NO,MGWCON=SMGWCON,AUTOFAX=YES,OOBTC=NO,B
CUID=0,SENDCAP=NO,G711TRAN=NO,BICCDTMF=TRAN
SPARENT,IPBCP2833=BYMGW,BICCDTMPPER=0,AOIPPR
O=PRIVATE;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating Inter-MGW Bear Mode


Prerequisites

Before the operation, it is required to confirm:

The MGW topological node is configured.

The MML Terminal window is opened.

Context

The inter-MGW bearer mode is configured when the Nb interfaces


between several IM-MGWs under the same MGCF are connected.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create the inter-MGW bearer mode. The command is ADD
MGWBEARMOD.
Table 44 describes the main parameters in the ADD MGWBE
ARMOD command.
TABLE 44 PARAMETERS IN THE ADD MGWBEARMOD COMMAND
Parameter
Name

Parameter
Description

Instruction

MGWPAIR

MGW node pair

Type the gateway node ID


configured in the topological
node configuration.

ATTR

Bearer attribute
between MGWs,
the options
include:

The parameter specifies the


bearer attribute between
MGWs. Select RTP or TDM

Confidential and Proprietary Information of ZTE CORPORATION

103

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

AAL1(support
bncAAL1)
AAL2(support
bncAAL2)
AAL1S (support
nbcAAL1Struct)

according to the type of Nb


interface bearer.

RTP (support
bncIPRTP)
TDM(support
bncTDM)

CTYPE

Type of
tone code
between MGWs,
the options
including:
GENERAL

AMRONLY represents the


AMR encoding and decoding
mode is used only. When
G.711 and other encoding
and decoding modes are
allowed, select GENERAL

AMRONLY
NAME

Alias

Adjacent office alias of


gateway 1-Adjacent office
alias of gateway 2

AAL1

AAL1 bearer
type rate(%)

The parameter specifies the


rate (%) of the AAL1 bearer
between two gateways

AAL2

AAL2 bearer
type rate(%)

The parameter specifies the


rate (%) of the AAL2 bearer
between two gateways

AAL1S

AAL1STRUCT
bearer type
rate(%)

The parameter specifies the


rate (%) of the AAL1 STRUCT
bearer between two gateways

RTP

IPRTP bearer
type rate(%)

The parameter specifies the


rate (%) of the IPRTP bearer
between two gateways

TDM

TDM bearer type


rate(%)

The parameter specifies the


rate (%) of the TDM bearer
between two gateways

DIRECT

Top-priority
direct link
topology, the
options include:
NO;
YES

104

Confidential and Proprietary Information of ZTE CORPORATION

The default is NO

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Parameter
Name

Parameter
Description
User plane
mode for
multi-gateway
IP bearer, the
options include:

UPMODE

TRANSPARENT(transparent
mode)

Instruction

The default is
TRANSPARENT

SUPPORT(support mode)
IPNET

G711TRAN

Public IP
network domain
index
G711 that is
forced to use
the transparent
mode. Options
include:

The parameter is used to set


the public IP network domain
index (ADD IPDOMAIN)

The default is NO

NO;
YES

Example: Configure the bearer mode between two IM-MGWs


with the following requirements.

MGW 1 node ID: 101

MGW 2 node ID: 201

Bearer mode: RTP

Type of tone code between IM-MGWS: AMRONLY

Encoding and decoding template ID: 1

Alias: IM-MGW101-IM-MGW201

Other parameters: default value.

The specific command is as follows.


ADD MGWBEARMOD:MGWPAIR="101"-"201",ATTR="RT
P",CTYPE=AMRONLY,AAL1=0,AAL2=0,AAL1S=0,RTP=10
0,TDM=0,DIRECT=YES,UPMODE=TRANSPARENT,NAME="I
M-MGW101-IM-MGW201",G711TRAN=NO;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

105

ZXWN MSCS Data Configuration Guide(MGCF)

SIGTRAN Configuration
Overview
Description

SINGTRAN-related configuration is required not only by the Mc


interface between MSCS and MGW, but also by the Nc interface
between MSCS and other direct-associated office over IP.
When the SCTP bears the M3UA protocol, configuring SCTP, ASP,
AS, M3UA static route and SIO-locating-AS is required.
When the SCTP bears H248 protocol, configuring SCTP is required
only. In general, this mode is not used.
Compared with the MTP data configuration of the traditional No.7
signaling, the SCTP association configuration and the ASP configuration of the M3UA are similar to the link logic and bearer information configurations in the MTP configuration, and the AS configuration of the M3UA is similar to the link set configuration in the
MTP configuration. The configuration of SIO location AS is similar
to the signaling office direction and route configuration in the MTP
configuration. The only difference between them is that one piece
of SIO location AS configuration record is configured the IP route
to a subscriber of an office.

106

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Configuration
Flow

Figure 52 shows the flow of SIGTRAN configuration.


FIGURE 52 SIGTRAN CONFIGURATION FLOW

According to the rules regulated in SCTP Planning, perform the


configuration by following the procedure specified below.
Steps

Operations

Instructions

Command

Creating an SCTP

Create an
association
between two
offices

ADD SCTPC
ONN

Creating an ASP

Configure the
one-to-one
relationship
between the
ASP and the
association.
ASP is one of
instances of AS.

ADD ASP

Confidential and Proprietary Information of ZTE CORPORATION

107

ZXWN MSCS Data Configuration Guide(MGCF)

Steps

Operations

Instructions

Command

Creating an AS

Configure the
tag, user type,
subsystem type
of AS

ADD AS

Creating an M3UA
static route

Configure
the mapping
relationship
between the
M3UA static
route and the
AS.

ADD M3UART

Creating the
SIO-Locating-AS

Locate one
service to
a routing
table that is
maintained by
the ASP under
the AS.

ADD SIOLO
CAS

SCTP Planning
The signaling carried by associations between MSCS and MGW is
as follows.
1. If the association bears the H248 signaling between MGCF and
IM-MGW, the H248/M3UA/SCTP bearer is adopted usually, and
the H248/SCTP bearer is supported.
2. The association bears the ISUP, TUP, and SCCP signaling
between MGCF and MSC/PSTN (MGW acts as an agent or
transfers the signaling). M3UA/SCTP adopts the (ISUP, TUP,
SCCP)/M3UA/SCTP bearer.
If the MTP3 direct-associated office does not exist on MGW, the
SCTP configuration is not required.
According to the rules regulated in SPC configuration rules, both
MGCF and IM-MGW adopts different combinations of signaling
points and network types for the three bearer modes mentioned
above. That is, an MGCF is configured with three adjacent offices
on IM-MGW, and one group of associations is configured between
every two adjacent offices for bearing different services.
The number of associations is related with the signaling networking, equipment capacity, and configured SMP number. It is also
limited by the configuration. For example, an AS can be configured with up to 16 SCTP associations.

Creating an SCTP
Prerequisites

Before the operation, it is required to confirm:

108

The physical configuration of the SMP module is completed.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

The SCTP flag is configured in the resource management.

The MML Terminal window is opened.

Context

The SCTP connection is called as association, which is of one-toone correspondence with ASP. It can be equivalent to the communication link used by the AS. An SMP can support up to 128
associations. When multiple BCTC shelves are configured, associations must share the load in each shelf.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create the SCTP connection. The command is ADD SCTPCO
NN.
Table 45 describes the chief parameters of the ADD SCTPC
ONN command.
TABLE 45 PARAMETERS IN THE ADD SCTPCONN COMMAND
Parameter
Name

MODULE

OFCID

Parameter
Description

Instruction

Module No.

It is a mandatory parameter,
indicating the number of the
signaling module homed by
this SCTP association. Select
the SMP module number. Each
SMP can support up to 128
associations. The associations
under the same AS are required
sharing load on SMP modules as
more as possible.

SCTP opposite
office ID

It is a mandatory parameter,
designating the office No. of the
direct-associated association.
Type the IM-MGW adjacent office
No. specified in the adjacent
office configuration.

Bearer protocol
types, including

M2UA

M2PA

M3UA

SUA

H248

BICC

IUA

DHCTRL

SIP

DIM

PROT

It is a mandatory parameter. It is
used to identify the upper-layer
protocol type borne by the SCTP
association. In general, M3UA
is selected. M2UA is selected
when IM-MGW transfers the
signaling with the M2UA mode.

Confidential and Proprietary Information of ZTE CORPORATION

109

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

V5UA

H245

SCTP application
attributes.
Options include:
ROLE

SVR: SCTP is
used as server
CLT: SCTP is
used as client

Instruction

It is a mandatory parameter.
For Mn interface, MGCF is
configured as CLT, and IM-MGW
is configured as SVR. For
Nc interface, this should be
negotiated by both sides. For
example, the small signaling
point serves as CLT, and the big
signaling point serves as SVR
It is a mandatory parameter. It
designates the service address
of local end of this association,
with a format of Local IP
address type-VPN of local IP
address-Local IP address

LOCADDR

Local IP address

Local IP address type: IPv4 and


IPv6
VPN of local IP address: Rang
from 0 to 65535
Local IP address: the format is
xxx.yyy.zzz.mmm

LOCPORT

REMADDR

Local port
number

Opposite IP
address

It is a mandatory parameter. It
is the local SCTP port number of
the association, ranging from 1
to 65535.
It is a mandatory parameter. It
designates the service address of
remote end of this association,
with a format of Remote
IP address type-VPN of
remote IP address-Remote
IP address
Remote IP address type: IPv4
and IPv6
VPN of remote IP address: Rang
from 0 to 65535
Remote IP address: the format
is xxx.yyy.zzz.mmm

REMPORT

Opposite port
number

It is a mandatory parameter. It is
the opposite SCTP port number
of the association, ranging from
1 to 65535.

NAME

Alias

It is a mandatory parameter with


a length ranging from 1 to 50
characters.

SCTP ID

It is an optional parameter. It is
the global serial number of the
SCTP association, ranging from 1
to 2048. Configure it according
to the association planning.

ID

110

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Example: Create the SCTP connection for the Mn interface with


the following requirements.

MGW office ID: 101

Bearer protocol: M3UA

Application attribute: CLT

SCTP signaling processing module number: 3

Local port number: 2001

Opposite port number: 2001

Local IP address: 192.168.1.11

Opposite IP address: 192.168.1.31

SCTP association ID: 1

Other parameters: default value.

The command is as follows.


ADD SCTPCONN:MODULE=3,OFCID=101,PROT=M3UA,R
OLE=CLT,LOCADDR="IPv4"-"0"-"192.168.1.11",LOCPORT
=2001,REMADDR="IPv4"-"0"-"192.168.1.31",REMPORT=2
001,NAME="IM-MGW101-1",ID=1,INSTRM=16,OUTSTRM
=16,MAXRTRY=5,MAXRTO=500,MINRTO=50,INITRTO=1
00,HB=500,FIXNH=NO,SCTPMAXRTRYNUM=10,DELAYA
CK=20,MAXBURST=4,PRIMARYPATH=REMIP1,PMTU=0,B
REAKTIME=0,PDTHRESH=0,MINCWND=0,PLTIMER=1
0,MPPLTHRD=2,DPLEN=MTU,CB=200;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating an ASP
Prerequisites

Before the operation, it is required to confirm:

The SCTP association information configuration is completed.

The range of the ASP configuration identification is configured


in the resource management configuration.

The MML Terminal window is opened.

Context

Perform this procedure to define the one-to-one relationship between the ASP and the association. ASP is one of instances of AS.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create an ASP. The command is ADD ASP.

Confidential and Proprietary Information of ZTE CORPORATION

111

ZXWN MSCS Data Configuration Guide(MGCF)

Table 46 describes the main parameters in the ADD ASP command.


TABLE 46 PARAMETERS IN THE ADD ASP COMMAND
Parameter
Name

Parameter
Description

Instruction
It is a mandatory parameter,
ranging from 1 to 2048

ASSOCID

NAME

ID

SCTP ID

Alias

ASP ID

ISLOOP

ASP self-loop ID

Type the association ID


configured in the SCTP
connection configuration.
It is a mandatory parameter,
with a lengthen ranging from
1 to 50 characters. It may
be named with a format of
Adjacent office alias-SCTP
number.
It is an optional parameter,
ranging from 1 to 2048.
It is recommended to be
consistent with ASSOCID.
It is an optional parameter. It is
used to set whether the ASP is
self-looped.
Select the default value NO

ISLOCK

ASP blocking flag

It is an optional parameter. It is
used set whether the ASP is in
blocking state.
Blocking is used for
management. Select the
default value NO

Example: Configure the ASP between MGCF and IM-MGW for


Mn interface with the following requirements.

MGW office ID: 101

SCTP association ID: 1

ASP configuration ID: 1

User alias: MGW101-1

The command is as follows.


ADD ASP:ASSOCID=1,NAME="MGW101-1",ID=1,ISLOOP
=NO,ISLOCK=NO;
END OF STEPS
Result

112

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Creating an AS
Prerequisites

Before the operation, it is required to confirm:

The ASP configuration is finished.

The MML Terminal window is opened.

Context

The AS provides the transmission channels for upper-layer services. For example, H248 and TUP/ISUP are different services.
They use different AS for transmission. The AS can use one or
more associations for communication.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create the AS. The command is ADD AS.
Table 47 describes the main parameters in the ADD AS command.
TABLE 47 PARAMETERS IN THE ADD AS COMMAND
Parameter
Name

Parameter
Description

Instruction

PROT

Supported
adaptation layer
protocols

It indicates the protocol


type of a bearer. In general,
M3UA is selected according
to the networking planning.
It is configured as M2UA
when MGW transfers the
signaling with M2UA mode.

ASPID

ASP ID

It is associated with the


ASP ID configured in the
ASP configuration.

NAME

Alias

It is a mandatory
parameter. The alias
customized by the user.

ID

AS ID

It is an optional
parameter. It is the unique
identification of the AS. In
general, it is the same as
that of the ASP for easy
memory. The parameter
ranges from 1 to 640

EXISTCTX

Whether the routing


context ID exists

CTXID

Routing context ID

It is an optional parameter.
The routing context is
unique in the network.
This parameter must
be consistent with the
AS configuration of the
opposite-end. Its default
value is NO

Confidential and Proprietary Information of ZTE CORPORATION

113

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction
It is an optional parameter.

Usage tag. Options


include:
SGP
ASTAG

ASP
SRV (IPSP server)
CLT (IPSP client)

ASUP

SSN

114

User types
supported by AS.
Options include TUP,
ISUP, BICC, H.248,
ALCAP SCCP, PCA,
NNSF and ALL

Types of subsystem.
Options include
NO_SSN (subsystem
SSN excluded
(null)), SCCP, REV2
(standby), ISUP,
OMAP, MAP, HLR,
VLR, MSC, EIR, AUC,
REV11(standby),
INAP, USSD, VLRA,
SGSN_BSCAP,
RANAP, RNSAP,
GMLC_MAP, CAP,
GSMSCF_MAP,
SIWF_MAP, SGSN_
MAP, GGSN_MAP,
IP (intelligent
peripherals),
SMC, SSP_SCP,
BSC_BSSAP_LE,
MSC_BSSAP_LE,
SMLC_BSSAP_LE,
BSS_O_M_A ,
BSSAP_A and
RVE255.

Confidential and Proprietary Information of ZTE CORPORATION

For Mn interface, MGCF


generally serves as
IPSP_Client, and IM-MGW
serves as IPSP_Server.
When IM-MGW acts as a
SGW, the AS at the MGCF
side serves as ASP, and the
AS at the SGW side serves
as SGP.
For Nc interface, this should
be negotiated by both
sides. For example, the
small signaling point serves
as IPSP_Client, and the big
signaling point serves as
IPSP_Server.
It is an optional parameter.
It defines the upper-layer
user types supported by
the AS. Currently, there are
eight types of users.
User type is not configured
when IM-MGW transfers
the signaling with the M2UA
mode

Types of subsystem
supported by application
server (AS).

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction
It is an optional parameter.
The supported service
modes include:

ASMD

Service modes
supported

OVERRIDE (Over-ride
mode)

LOAD (Load share


mode).

In the over-ride mode,


only one ASP is in the
activated statue. In this
case, only one ASP needs
be configured. In the
load sharing mode, N
ASPs should be configured
in the activated working
statue, and K ASPs should
be configured in the
deactivated standby statue.
The value of N+K is not
more than the number of
ASPs actually configured
The parameter ranges from
0 to 64.

NVAL

The N value in load


sharing mode

The N+K should be equal to


the number of ASP under
AS.
The N value indicates that
AS comes into service when
N ASPs are put into service.
The parameter ranges from
0 to 63.

The K value in load


sharing mode

KVAL

The N+K should be equal to


the number of ASP under
AS.
The K value indicates that
AS is out of service when K
ASPs are used as standby
ASP.

Example: Configure the AS between MGCF and IM-MGW for


Mn interface with the following requirements.

MGW office ID: 101

Supported adaptation layer protocol: M3UA

AS configuration ID: 1

Supported user type: H248

ASP ID: 1

Usage Tag: CLT

Alias: H248

The command is as follows.

Confidential and Proprietary Information of ZTE CORPORATION

115

ZXWN MSCS Data Configuration Guide(MGCF)

ADD AS:PROT=M3UA,ASPID="1",NAME="H248",ID=1,EX
ISTCTX=NO,ASTAG=CLT,ASUP="H248",ASMD=LOAD,NVA
L=1,KVAL=0;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating an M3UA Static Route


Prerequisites

Before the operation, it is required to confirm:

The AS configuration is finished.

The range of the M3UA static route identification is configured


in the resource management configuration.

The MML Terminal window is opened.

Context

Perform this procedure to configure the mapping relationship between the M3UA static route and the AS. An M3UA static route
can be used by up to 64 SIO-locating-ASs. Otherwise, configuring
more M3UA static routes is required.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create the M3UA static route. The command is ADD M3UART.
Table 48 describes the main parameters in the ADD M3UART
command.
TABLE 48 PARAMETERS IN THE ADD M3UART COMMAND

116

Parameter
Name

Parameter
Description

Instruction

ID

ID of M3UA
static route

It is an optional parameter,
indicating the serial number of the
M3UA static route ID, ranging from
1 to 640. In general, it is the same
as the AS ID.

ASID

AS ID

It is a mandatory parameter,
corresponding to the AS ID
specified in the ADD AS command.

MODE

Alignment
mode of
routes.
Options
include
BYTURNS,

Nature: routes are directly sorted


according by the ASP marshalling
sequence in the routing table.
Local: It is unnecessary to realize
the algorithm in the background.
The background just needs to
make the alignment according to
the Nature option.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Parameter
Name

Parameter
Description

LOCAL and
NATURE.

Instruction
BYTURNS: in the routing table,
the routes at the odd-bit position
are sorted by the serial number of
the activated ASP, and the routes
at the even-bit position are sorted
inversely by the serial number of
the activated ASP
The default is BYTURNS.

NAME

Alias

It is a mandatory parameter
defined by a user, with a length
ranging from 1 to 50 characters.

Example: Create an M3UA static route for Mn interface with


the following requirements.

MGW office ID: 101

M3UA static route ID: 1

AS ID: 1

User alias: IM-MGW101

The specific command is as follows.


ADD M3UART:ID=1,ASID=1,MODE=BYTURNS,NAME="IM
-MGW101";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating the SIO Locate AS


Prerequisites

Context

Before the operation, it is required to confirm:

The M3UA static route configuration is completed.

The range of the SIO-locating-AS configuration ID is configured


in the resource management configuration.

The MML Terminal window is opened.

The configuration of SIO-locating-AS is used to locate one service


to a routing table that is maintained by the ASP under the AS.
On MGCF, H248 protocol is generally configured between MGCF
and IM-MGW, and ISUP, TUP, and SCCP protocols are configured
between MGCF and other adjacent offices that are switched by
IM-MGW.
A routing key describes a set of No.7 signaling parameters and
parameter values. The corresponded AS is selected according to
the message attributes, thus to select a route for the message.

Confidential and Proprietary Information of ZTE CORPORATION

117

ZXWN MSCS Data Configuration Guide(MGCF)

The message attributes include DPC+NET+OPC+SIO. The DPC


represents the destination SPC, the NET represents the network
type, OPC represents the original SPC, and the SIO represents
the service information octet.
Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create the SIO-locate-AS. The command is ADD SIOLOCAS.
Table 49 describes the main parameters in the ADD SIOLO
CAS command.
TABLE 49 PARAMETERS IN THE ADD SIOLOCAS COMMAND
Parameter
Name

Parameter
Description

Instruction

ID

SIO-locate-AS
ID

It is an optional parameter,
indicating the serial number of
SIO-locate-AS, ranging from 1 to
4096. In general, it is the same as
the AS ID.

NAME

Alias

It is a mandatory parameter, which


is the alias customized by the user

SIO

OFCID

OPOFCID

118

Service
indication.
Options
include TUP,
ISUP, BICC,
H.248, ALCAP,
SCCP,PCA and
NNSF

It is a mandatory parameter,
indicating the subscriber type
belonged by the transmitted
message. Different user types can
be located to the same AS under
the precondition that the AS must
support these user types.
Select H.248 for Mn interface,
BICC for Nc interface, and TUP or
ISUP for the 2G MSC/PSTN office
transferred through MGW.

Destination
adjacent office
ID

It is a mandatory parameter,
indicating the adjacent office ID
corresponded by the destination
signaling point of the M3UA.
It needs to associate with the
adjacent office ID in the adjacent
office configuration.

Original
adjacent office
ID

It is the adjacent office ID


corresponding to the M3UA
originating signaling point. If
0 (indicating the local office)
is selected, it indicates that
the message is sent from the
local office, and the routing
context is routed according to
DPC+NET+OPC+SIO. If 65535
(invalid) is selected, it indicates
that the OPC field is invalid, and

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction
the routing context is routed
according to DPC+NET+SIO

PCM system
number

PCM

RT1

ID 1 of M3UA
static route

RT2

ID 2 of M3UA
static route

It is an optional parameter. It
ranges from 0 to 65535, with a
default of 65535 (invalid).

It corresponds to the ID
specified in the M3UA static
route configuration. RT1 is a
mandatory parameter. In general,
RT1 is required. When the
optimum route mode is adopted,
RT1 is set as an active route, and
RT2 is set as a standby route.

Example: Create SIO-locate-AS between MGCF and IMMGW


with the following requirements.

IM-MGW office ID: 101

Destination adjacent office ID: 101

Service indication: H248

M3UA static route ID: 1.

The specific command is as follows.


ADD
SIOLOCAS:ID=1,NAME="IM-MGW-H248",SIO=H24
8,OFCID=101,OPOFCID=65535,PCM=65535,RT1=1,RT2
=0;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

H.248 Configuration
Overview
Description

H.248 protocol is used on Mn interface. It provides the following


functions.

Under the control of MGC, it can establish, modify and release


the media channel in the MG, and can control the attributes of
bearer and user plane.

It reports the events in the MG to the MGC.

It maintains the office and terminal status between MGC and


MG.

Confidential and Proprietary Information of ZTE CORPORATION

119

ZXWN MSCS Data Configuration Guide(MGCF)

Configuration
Flow

Figure 53 shows the configuration flow of H.248 protocol.


FIGURE 53 CONFIGURATION FLOW

Flow Description

120

The H.248 configuration procedures are as follows:


Steps

Operations

Instructions

Command

Creating MGC
static data

Cofigure the data


related to the
MGCF and H.248.

ADD MGCSCFG

Creating an
MGW static data
template

Configure the
template used
by the MGW
static data
configuration.

ADD MGSTPL

Creating MGW
static data

Configure the
static data for
each IM-MGW
under the MGCF.

ADD MGSCFG

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Steps

Operations

Instructions

Command

Creating a TID
analyzer

The TID analysis


configuration is
necessary for
the H.248 server
to perform the
character string
conversion of
the CIC. Nomally
adopt the default
configuration.

ADD TIDANL

Creating a TID
analysis entrance

Configure a
TID analyzer
entrance.
Nomally adopt
the default
configuration.

ADD TIDENTR

Creating MGC Static Data


Prerequisites

Before the operation, it is required to confirm:

The data configuration of the local office is completed.

The MML Terminal window is opened.

Context

Perform this procedure to set the data related to the MSCS and
H.248.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create the MGC static data. The command is ADD MGCSCFG.
Table 50 describes the main parameters in the ADD MGCSCFG
command.
TABLE 50 PARAMETERS IN THE ADD MGCSCFG COMMAND
Parameter
Name

Parameter
Description

Instruction

MEGACO

MEGACO version
number

It is an optional parameter.
Select the supported MEGACO
version number, which must
be consistent with that
negotiated with the MGW. The
default value is 1

ACTTM

Service activation
detection timer(s)

It is an optional parameter,
ranging from 0 to 3600, with
a default of 600

Confidential and Proprietary Information of ZTE CORPORATION

121

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

ACTCHK

Service activation
detection switch

It is an optional parameter,
being activated by default.

WAITTM

MGW answer
waiting timer
(ms)

It is an optional parameter,
ranging from 0 to 65535, with
a default of 7800

PTRYNUM

PEND retry
times(t)

It is an optional parameter,
ranging from 1 to 255, with a
default of 5

PTRYTM

PEND retry time


(ms)

It is an optional parameter,
ranging from 0 to 65535, with
a default of 4000

CTXLIVETM

Context live
time(s)

It is an optional parameter,
ranging from 0 to 65535, with
a default of 1200

NAME

Alias

It is an optional parameter,
ranging from 0 to 50
characters. It may be
the same as the office name

Example: To add the MGC static data of an MGCF office with all
the parameters adopting default value, the specific command
is as follows.
ADD MGCSCFG:MEGACO=1,ACTTM=600,ACTCHK=ON,W
AITTM=7800,PTRYNUM=5,PTRYTM=4000,CTXLIVETM=1
200,MGACTTM=600;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating MGW Static Data Template


Prerequisites

Before the operation, it is required to confirm:

The data configuration of the local office is completed.

The MML Terminal window is opened.

Context

Perform this procedure to set the template used by the MGW static
data configuration.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;

122

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

2. Create an MGW static data template. The command is ADD


MGSTPL.
Table 51 describes the main parameters in the ADD MGSTPL
command.
TABLE 51 PARAMETERS IN THE ADD MGSTPL COMMAND
Parameter
Name

Parameter
Description

Instruction

NAME

Alias

This is a mandatory parameter


with a length ranging from 1
to 50 characters. It can be
consistent with the office name.

ID

Static data
template
number

The number of a template,


ranging from 1 to 255

MEGACO

MEGACO
version number

This parameter must be


consistent with that negotiated
with the MGW.

ACTCHK

Gateway
activation
detection switch

It is configured as ON by default

PRTTM

Transient
protection timer
(s)

It ranges from 1 to 180. Type


the default value 10

PRT

Transient
protection
switch

It is configured as ON by default.

PENDTM

Interval of
PEND messages
(ms)

It ranges from 0 to 3600, with a


default of 200

LNGTM

Maximum
existence time
(ms)

It ranges from 0 to 65535, with


a default of 15000

RTRNTM

Retransmission
timer (ms)

It ranges from 0 to 65535, with


a default of 3800

MTRNNUM

Maximum
transmission
times

It ranges from 0 to 15, with a


default of 1

TRNMD

Retransmission
mode

CTYPE

H.248 protocol
coding mode

FIXED: Duration unchangeable

UNFIXED: Duration changeable

It must be consistent with that


negotiated with the MGW data
configuration

Example: Add an MGW static data template with the following


requirements.

Confidential and Proprietary Information of ZTE CORPORATION

123

ZXWN MSCS Data Configuration Guide(MGCF)

Template ID: 1

User name: IM-MGW101

Other parameters: default value.

The specific command is as follows.


ADD MGSTPL:NAME="IM-MGW101",MEGACO=1,ACTCHK
=ON,PRTTM=10,PRT=ON,PENDTM=200,LNGTM=15000,R
TRNTM=3800,MTRNNUM=1,TRNMD=UNFIXED,CTYPE=TE
XT;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating MGW Static Data


Prerequisites

Before the operation, it is required to confirm:

The MGW topological node is configured.

The MGW static data template is configured.

The MGCF voice batch processing is finished.

The MML Terminal window is opened.

Context

Perform this procedure to configure the static data for each


IM-MGW under the MGCF.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create MGW static data. The command is ADD MGSCFG.
Table 52 describes the main parameters in the ADD MGSCFG
command.
TABLE 52 PARAMETERS IN THE ADD MGSCFG COMMAND
Parameter
Name

124

Parameter
Description

Instruction

ID

Gateway number

It is a mandatory parameter
for configuring the node
number of this gateway,
ranging from 1 to 2048. It is
associated with the node ID
specified by the ADD TOPO
command.

TPLID

Static data
template number

It is a mandatory parameter
associated with the template
number configured on

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction
the IM-MGW static data
template configuration.

TONEID

Service tone
template ID

It is an optional parameter
ranging from 0 to 65535.
It uses the template ID
specified in the BADD
STONE command.

LANGID

Language
description
template ID

It is an optional parameter,
ranging from 0 to 65535.
It uses the template ID
specified in the BADD
STONE command.

NAME

Alias

It is a mandatory parameter,
ranging from 0 to 50
characters. It may be the
same as the office name

BKMGC

Backup MGC
information

It is an optional parameter,
with a default of NULL

PKGLOST

Threshold of
package loss rate
(0.01%)

It is an optional parameter,
ranging from 0 to 10000,
with a default of 10

JIT

Threshold of
network jittering
(ms)

It is an optional parameter,
ranging from 0 to 10000,
with a default of 50

DELAY

Threshold of
network delay (ms)

It is an optional parameter,
ranging from 0 to 5000, with
a default of 200

MGW tandem

It is an optional parameter
for setting whether this
MGW is used for the tandem
function. Type the default
value NO

MGW

Example: Create static data for an MGW with the following


requirements.

MGW office ID: 101

Static configuration template ID: 1

Alias: IM-MGW101

The specific command is as follows.


ADD MGSCFG:ID=101,NAME="IM-MGW101",TPLID=1,TO
NEID=1,LANGID=1,PKGLOST=10,JIT=50,DELAY=200,M
GW=NO;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

125

ZXWN MSCS Data Configuration Guide(MGCF)

Creating a TID Analyzer


Prerequisites

Before the operation, it is required to confirm:

The data configuration of the local office is completed.

The MML Terminal window is opened.

Context

The TID analysis configuration is necessary for the H.248 server


to perform the character string conversion of the CIC. The H.248
server converts the CIC on the server to the corresponding character string according to the mode configured by the TID analysis.
Then it sends this character string to the gateway's H.248 for analyzing and operating the corresponded CIC. Since the form of the
terminals used by the Mn interface is relatively fixed currently, you
may adopt the default configuration.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create the TID analyzer. The command is ADD TIDANL.
Table 53 describes the main parameters in the ADD TIDANL
command.
TABLE 53 PARAMETERS IN THE ADD TIDANL COMMAND
Parameter
Name

Parameter
Description

Instruction

User alias

It is a mandatory parameter,
ranging from 1 to 50
characters. It may be the
same as the office name.

PREV

TID analyzer index

It is an optional parameter.
It is the global number of
the current analyzer for
TID analyzer entry to use,
ranging from 1 to 255.

TIDPFX

TID prefix

It is an optional parameter
with a default of TDM

NAME

TAG

126

Analysis result
flag. Options
include USER,
TRUNK, RTP,
ATM, ROOT and
PCM+IDX.

Confidential and Proprietary Information of ZTE CORPORATION

It is an optional parameter,
with a default of TRUNK
(trunk type).
Example: TDM_5/1 is a
trunk terminal form. TDM
is the TID prefix, _ is the
PCM separation mark, 5 is
the PCM number, "/ is the
IDX (time slot index) is the
separation mark, and 1 is
the time slot number

Chapter 4 MGCF-IM-MGW Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction

PCMSPR

PCM flag

It is an optional parameter,
with a default of .

IDXSPR

IDX flag

It is an optional parameter,
with a default of /.

PCM start location

It is an optional parameter,
ranging from 0 to 255, with a
default of 1, indicating that
the PCM number starts from
the first digit of the PCM flag.

PCM end location

It is an optional parameter,
ranging from 0 to 255, with a
default of 0. Since there is a
PCM flag, the End Location is
meaningless.

IDX start location

It is an optional parameter,
ranging from 0 to 255, with a
default of 1, indicating that
the time slot number starts
from the first digit of the IDX
flag.

IDX end location

It is an optional parameter,
ranging from 0 to 255, with
a default of 0. Since there is
an IDX flag, the End Location
is meaningless.

PCMPOS1

PCMPOS2

IDXPOS1

IDXPOS2

Example: Create a TID analyzer with the following requirements.

MGW office ID: 101

TID index: 1

Alias: IM-MGW101

Other parameters: default value.

The command is:


ADD TIDANL:NAME="IM-MGW101",PREV=1,TIDPFX="TD
M",TAG=TRUNK,PCMSPR="_",IDXSPR="/",PCMPOS1=1,P
CMPOS2=0,IDXPOS1=1,IDXPOS2=0;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating a TID Analysis Entrance


Prerequisites

Before the operation, it is required to confirm:

The MGW topological node is configured.

Confidential and Proprietary Information of ZTE CORPORATION

127

ZXWN MSCS Data Configuration Guide(MGCF)

Context
Steps

The TID analyzer configuration is completed.

The MML Terminal window is opened.

Perform this procedure to configure a TID analyzer entrance.


1. If no exchange is specified, execute command SET on the MML
Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a TID analysis entrance. The command is ADD TIDEN
TR.
Table 54 describes the main parameters in the ADD TIDENTR
command.
TABLE 54 PARAMETERS IN THE ADD TIDENTR COMMAND
Parameter
Name

Parameter
Description

Instruction

ND

Gateway

It is a mandatory parameter. It is the


node ID allocated by the topological
node configuration.

TIDENTID

TID analyzer
index

It is a mandatory parameter
associating the TID analyzer ID
specified in the TID analyzer
configuration.

TIDTPLID

TID template
number

By default, the system already


creates a TID template whose ID is
1. You may query it with the SHOW
TIDTPL command.

User Alias

It is a mandatory parameter with


a length ranging from 0 to 50
characters. It may be the same as
the office name.

NAME

Example: Create a TID analyzer entry with the following requirements.

MGW office ID: 101

TID analyzer index: 1

TID template ID: 1

Alias: IM-MGW101

The specific command is as follows.


ADD TIDENTR:ND=101,TIDENTID=1,TIDTPLID=1,NAME
="IM-MGW101";
END OF STEPS
Result

128

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

MGCF-SIP Office
Interconnection Data
Configuration
Table of Contents
Overview........................................................................ 129
SIPCC Data Configuration ................................................. 130
SIP Protocol Stack Configuration........................................ 141
Creating an RTP Trunk Group ............................................ 160

Overview
The configuration flow of MGCF-SIP office interconnection data is
shown in Table 55.
TABLE 55 FLOW DESCRIPTION
No.

Operations

Instructions

SIP call control data


configuration

Including local office data


configuration, adjacent office
data configuration, SIP office
direction data configuration,
TOPO configuration, trunk data
configuration, and number analysis
data configuration

SIP protocol stack


data configuration

Including IP link data configuration,


host data configuration, adjacent
host data configuration, UDP bear
data configuration, SIP signaling data
configuration, IP distribution policy
data configuration, SIP signaling
route data configuration, and SIP
signaling route set data configuration

Confidential and Proprietary Information of ZTE CORPORATION

129

ZXWN MSCS Data Configuration Guide(MGCF)

SIPCC Data Configuration


Overview
This section introduces how to configure the signaling interworking
with the adjacent offices through the SIP protocol.
Steps

Operations

Interface address
configuration

Creating a static
route

Creating a SIP
adjacent office

Instructions
Create the IP
protocol stack for
the IP interface
over the SIP
protocol, and
configure virtual
interface address,
refer to Creating
a Virtual Interface
Address
Create the static
route for the IP
interface over
the SIP protocol,
refer to Creating a
Static Route
Create an adjacent
office connected
with the MGCF
through SIP
protocol

Commands

INTERFACE
ADD IP
ADDRESS

ADD IP ROUTE

ADD ADJOFC

Creating a SIP office


direction

Create a SIP
office direction
connected with
the MGCF through
SIP protocol.

ADD SIPOFC

Creating SIP
adjacent office
topology node

Create the
topology
relationship
between MGCF
node and SIP
adjacent office
node

ADD TOPO

Creating a SIP Adjacent Office


Prerequisites

130

Before the operation, it is required to confirm:

The exchange ID to be configured is known.

The local office data configuration is completed.

The adjacent office ID range is set in the Resource Management system.

The MML Terminal window is opened.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

Context

This section introduces how to configure an adjacent office


connected with the MGCF through SIP protocol, which is I-CSCF,
S-CSCF, P-CSCF or BGCF in general.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create an adjacent office (such as CSCF or BGCF) connected
with the MGCF through SIP protocol by executing command
ADD ADJOFC.
The explanation of the main parameters in command ADD
ADJOFC is shown in Table 56.
TABLE 56 PARAMETERS FOR CREATING A SIP ADJACENT
OFFICE
Parameter
Name

Parameter
Description

Instruction

ID

Office ID

It is a mandatory parameter,
ranging from 1 to 3000.
During the whole network
planning, this parameter is
generally configured to the
adjacent office ID

NAME

Alias

It is a mandatory parameter,
defined by users

NET

Network type

It is a mandatory parameter.
Select the network type
of the SPC used for the
connection between the
local office and the adjacent
office when the local office
is configured with multiple
signaling points. If the local
office is only configured
with only one signaling
point, the network type
of this signaling point is
selected by default. For the
adjacent office connected
with the MGCF through SIP
protocol, this parameter is
meaningless

SPCFMT

Signaling Point Code


Format

TRIPLE_DEC is selected by
default

SPCTYPE

Signaling Point Code


type

Configure it according to the


signaling point plan

Confidential and Proprietary Information of ZTE CORPORATION

131

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

Signaling Point Code

It is a mandatory parameter.
It is the SPC used for
the connection between
the local office and the
adjacent office. For the
adjacent office connected
with the MGCF through SIP
protocol, this parameter
needs not be configured and
is meaningless. Just enter a
non-zero value

Area code

It is an optional parameter.
Enter the code of the area
where the adjacent office is
located. This parameter has
influence on the area code
added for the calling number

Office Type

It is a mandatory parameter.
Configure the adjacent office
connected with the MSCS
through SIP protocol to
LOCAL&DOMTOLL&IP

ASSOTYPE

Association type

It is an optional
parameter. Select
AM_SURE (associated
mode), or AM_QUASI
(quasi-associated mode)
according to the networking
condition

SPTYPE

Signaling point type,


including SEP, STP,
and STEP

Select it according to the


role of the adjacent office in
the signaling network

DPC

RC

OFCTYPE

Subservice function,
including

INTERNATIONAL (International signaling


point code)

INTERNATIONAL
STANDBY (International standby
signaling point
code)

SSF

132

NATIONAL
(National
signaling point
code)

NATIONAL
STANDBY
(National standby
signaling point
code).

Confidential and Proprietary Information of ZTE CORPORATION

It is an optional parameter.
NATIONAL is generally
selected in China

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction

Office Attribute,
including:
ISNI (Has ISNI
Function)

TAG

TRANS (Translate
Node)

It is an optional parameter

TEST (Need Test


Info:0X02/0X01)

TEST

Test flag

It is an optional parameter.
In general, select this
parameter, which is used to
set whether the MTP3 link
actively initiates the link
test after going into service
status
It is an optional parameter
with a default of NO. It
is used for SCCP to judge
whether to use the LUDT
message.

BANDFLAG

Broadband Attribute

The maximum length of a


broadband link message
is 4,000, and that of a
narrowband link message
is 255. Because the MTP
layer does not have the
segmentation function, the
incorrect configuration of
this parameter probably
causes the long packet to be
discarded.
Select YES when all the
links between two SPs are
SIGTRAN or ATM signaling
links.

Protocol types,
including:

CHINA (China)

ITU (International
Telecommunications Union)

ANSI (American
National
Standards
Institute).

PRTCTYPE

It is an optional parameter.
CHINA and ITU are used
for the NO.7 signaling
networking of the ITU
standards. ANSI is used
for the No.7 signaling
networking of the American
standards.
In general, national offices
select CHINA, while
international offices select
ITU

Confidential and Proprietary Information of ZTE CORPORATION

133

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

CLST

Parameter
Description

Instruction

Cluster ID

It is an optional parameter
within 0~65535. In general,
select the default value
65535. It is valid when the
protocol type of the adjacent
office is ANSI. The
signaling point connected to
the signaling transfer point
belongs to the corresponding
cluster. The cluster ID is
configured in the command
ADD CLST

Office Info, including:


CIC_PCM (CIC starts
the load sharing
according to the PCM
code mode)
BLOCK (Manual block
status)

INFO

EVEN_CIC (The
office controls the
even CIC when CIC
resource contention
occurs)

It is an optional parameter
and the default value is
CIC_PCM

CALLING (Calling
transform is allowed)
CALLED (Called
transform is allowed)
MOD24_CIC (CIC
mode with 24 mode)
TEST (Dynamic
observation)
RELATEDOFC1

Related Office ID

It is an optional parameter
ranging from 0 to 3000

Office Extend Info,


including:

INFOEX

134

SIGBRDCST
(Support Signa
ling Broadcast
Message)

MTP (Hongkong
MTP Standard)

DUPU ( Screen
DUPU message)

SUA_REC_DT1
(Receive SUA
message and
handle it as DT1
message)

SUA_SND_DT1
(Send SUA
message and
handle it as DT1

Confidential and Proprietary Information of ZTE CORPORATION

It is an optional parameter

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction

message without
SN.)

OPEN_TG_RES
(Open outter
trunk group
resource)

For example, add the S-CSCF. The office ID is 12, the office
type is LOCAL&DOMTOLL&IP, the signaling point code type
is 24, the signaling point code is 3.12.1, the area code is 25,
the association type is AM_SURE, the signalng point type is
SEP. For the other parameters, adopt the default value. The
command is as follows:
ADD ADJOFC:ID=12,NAME="SCSCF",NET=1,OFCTYPE="L
OCAL"&"DOMTOLL"&"IP",SPCFMT=TRIPLE_DEC,SPCTYPE=2
4,DPC="3.12.1",RC="25",ASSOTYPE=AM_SURE,SPTYPE
=SEP,SSF=NATIONAL,SUBPROTTYPE=DEFAULT,TEST=YE
S,BANDFLAG=YES,PRTCTYPE=CHINA,CLST=65535,INFO
="CIC_PCM",RELATEDOFC1=0;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating SIP Office Direction


Prerequisites

Before the operation, it is required to confirm:

The local office data is configured.

The SIP adjacent office is configured.

The MML Terminal window is opened.

Context

This section introduces how to create a SIP office direction connected with the MGCF through SIP protocol.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a SIP office direction. The command is ADD SIPOFC.
Table 57 describes the main parameters in the ADD SIPOFC
command.

Confidential and Proprietary Information of ZTE CORPORATION

135

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 57 PARAMETERS IN THE COMMAND ADD SIPOFC


Parameter
Name

OFCID

Parameter Description

Instruction

Office ID

It is a mandatory parameter, ranging from


1 to 3000. Adopt the
SIP adjacent office ID
configured in the ADD
ADJOFC command

URL type, includes


URL

TEL: TEL format

URI: SIP URI format

IP: SIP IP format

MGCF Charging Mode,


includes
BTYPE

ENOPT

IN: Inner Bill

Rf: Rf Bill

Enable Option

It is an optional parameter with a default value


URI

It is an optional parameter with a default value


IN

Select SIP ESSO&SIP


PRECOND

Example: Create a S-CSCF SIP office with the following requirements.

SIP office ID: 12

URL type: URI

MGCF charging mode: IN

Enable option: SIP ESSO& SIP PRECOND

The specific command is as follows.


ADD SIPOFC:OFCID=12,URL=URI,BYPASS=NO,BYPASS
PCT=80,BYPASSPRD=5,BYPASSTLEN=30,BYPASSLEV=L
N,BYPASSCALLNUM=1,BTYPE=IN,OVERLAP=RINVT,CFIN
FO=HIS,PBRTFMT=EQUAL,DTMF=IN,FMT4733=97,SIPRE
L=NO,ENOPT="SIP ESSO"&"SIP PRECOND";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating SIP Adjacent Office


Topology Node
Prerequisites

Before the operation, it is required to confirm:

136

The encoding and decoding speech template is configured.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

The range of the topological node number is configured in the


resource management.

The MML Terminal window is opened.

Context

Perform this procedure to create the topology relationship between


MGCF node and SIP adjacent office node. This command is used to
configure the adjacent NE information, including equipment type,
bearer type and attributes, user plane version, encoding and decoding template, and other information.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a SIP adjacent office topology node. The command is
ADD TOPO.
Table 58 describes the main parameters in the ADD TOPO
command.
TABLE 58 PARAMETERS IN THE ADD TOPO COMMAND
Parameter
Name

Parameter
Description

Topological node
ID

ID

OFCID

Office ID

Instruction
It is a mandatory parameter to
define ID of this node, ranging
from 1 to 2,048.
It is recommended that the ID
and office No. of a topological
node are consistent
It is a mandatory parameter
for specifying the office ID of
this topological node. This
parameter must be defined by
the ADD ADJOFC command
first.
In this case, type the actual
IM-MGW office number

NAME

CODECID

Alias

It is a mandatory parameter
for naming this topological
node, with a length ranging
from 1 to 50 characters.

CODEC identity

It is a mandatory parameter
for specify the CODEC
template used by this
topological node. This
parameter must be defined
by the ADD CODECTPL
command first.

Confidential and Proprietary Information of ZTE CORPORATION

137

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

ETYPE

Parameter
Description

Equipment type

Instruction
This parameter is used to
specify the NE type of this
topological node.
Select R4GW for an MGW
node

PROTTYPE

IPVER

ATTR

Protocol type

Select H.248 for Mn interface.

IP version of the
node

It is the IP protocol version


supported between nodes.
Select IPV4 or IPV6
according to the actual
conditions. Currently, IPV4 is
supported.

Bearer attributes

This parameter is only valid


for the node with the type
of R4GW (MGW). The bearer
types supported by MGW
are BNCAAL1, BNCAAL2,
BNCAAL1S, BNCIPRTP,
and BNCTDM. MGW can one
or more of these types of
bearers.
In general, select BNCAAL2,
BNCIPRTP, and BNCTDM

UPVER

User plane
protocol version
of RNC or MGW
Extended
attributes (tunnel
mode), including:

NOTUNL
(None tunnel
mode)

RTUNL
(Rapid tunnel
mode)

ATTR2

DTUNL
(Delay tunnel
mode)

Signaling transfer
mode, including:
TRFMOD

138

MCINTF (Mc
interface signal
transfer mode)

Confidential and Proprietary Information of ZTE CORPORATION

This parameter is used to set


the user plane version of this
node.
In general, select V2

This parameter is used to set


which tunnel mode is adopted
for bearer establishment when
this node supports the IP/RTP
bearer. The default value is
NOTUNL (None tunnel mode).
In general, select DTUNL
(Delay tunnel mode) for an
MGW topological node.

This parameter is used to set


which mode is used by the
topology for reporting when
it detects CNG or CED fax
signals.
The default value is MCINTF

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction

Error SDU
control, including
options:
YES: The user
plane entity implements error
inspection, and
sets the FQC bit
position according to the result.
It will transmit
all frames includes the error
frames to the
user plane layer.
During a call, the
error packet control parameter
delerrsdu=Yes,
which is delivered
by the terminal
established by
MGW on the Mc
interface. The
error packet control parameter
deliveryOfErroneousSDU is YES,
NA, NA during
RAB assignment.
UPERRCTRL

NO: The user


plane entity implements the
error inspection.
It will directly
discard the error
frame. During
a call, the error packet control parameter
delerrsdu=No,
which is delivered
by the terminal
established by
MGW on the Mc
interface. The
error packet control parameter
deliveryOfErroneousSDU is NO,
NA, NA during
RAB assignment.

This parameter regulates the


handling method of the user
plane for error frames. It is
only valid for MGW-type and
RNC-type topological node.
The default value is YES

INVALIDTION:
The user plane
entity does not
implement the
error inspection.
During a call, the
error packet control parameter
delerrsdu=NA,
which is delivered

Confidential and Proprietary Information of ZTE CORPORATION

139

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

by the terminal
established by
MGW on the Mc
interface. The
error packet control parameter
deliveryOfErroneousSDU is NA,
NA, NA during
RAB assignment.

DTMFTC

Tandem office
send DTMF
use TC mode,
including two
options, NO and
YES

This parameter is used to set


whether the tandem office
uses the TC resources during
DTMF number delivery.
The default value is NO
It contains the following
options.

MGWCON

MGW congestion
reporting
capability

SMGWCON (Standard
MGW congestion event)

CMGWCON (Custom MGW


congestion event).

The default value is


SMGWCON.

Example: Create a topological node with the following requirements.

MGW office ID: 101

Equipment type: R4 gateway

Protocol type: H248

Supported user plane protocol version: V2

CODEC ID: 1.

The specific command is as follows.


ADD TOPO:ID=12,OFCID=12,NAME="SCSCF",CODECID
=1,ETYPE=MSCVLR,PROTTYPE=SIP,IPVER=IPV4,ATTR
="BNCIPRTP",ATTR2=NOTUNL,TRFMOD=MCINTF,UPERRCT
RL=YES,DTMFTC=NO,MGWCON=SMGWCON,AUTOFAX=YE
S,OOBTC=NO,BCUID=0,SENDCAP=NO,G711TRAN=NO,BI
CCDTMF=TRANSPARENT,IPBCP2833=BYMGW,BICCDTMP
PER=0,AOIPPRO=PRIVATE;
END OF STEPS
Result

140

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

SIP Protocol Stack


Configuration
Overview
When the MSCS serves as a MGCF, after the local office data configuration is completed, it is required to add the basic SIP configuration, including the following contents.
Steps

Operations

Instructions

Commands

Creating an IP link

Create an IP
bearer link used
for SIP signaling.

ADD IPLINK

Setting the
capacity for a
SIP module

Configure the
capacity for a SIP
module according
to the system
capacity

SET SIPCAPA

Creating a domain
where the MGCF
belongs

Creating the
domain of MGCF
system

ADD REALM

Creating a MGCF
host

Creating MFCF
host name, type
and IP address

ADD HOST

Creating route
selector

A routing selector
is a set of multiple
number analyses,
used to store
the analyses
of MSISDN, IP
numbers and
domain addresses
in the IMS domain

ADD RTSEL

Creating a service
group

Service groups are


used to specify the
routing selector
for a number.

ADD SRVG

Creating an
adjacent host

Create an adjacent
host (CSCF or
BGCF) of the
MGCF.

ADD ADJHOST

Creating UDP bear

Create two modes


of UDP bear:
LOCAL_VALID and
REMOTE_VALID

ADD UDPBR

Confidential and Proprietary Information of ZTE CORPORATION

141

ZXWN MSCS Data Configuration Guide(MGCF)

Steps

Operations

Instructions

Commands

Creating a SIP
signaling link

For the adjacent


office connected
with the MGCF
through SIP, it
is required to
configure SIP
signaling links.

ADD SIPLNK

Creating a SIP
signaling route

Create signaling
routes. Each SIP
signaling route
contains at most
12 SIP signaling
links.

ADD SIPRT

Creating a SIP
signaling route set

Create signaling
route sets. Each
SIP signaling
route set contains
at most 4 SIP
signaling routes.

ADD SIPRTS

12

Creating IP
Distribution Policy

When the MGCF


can be configured
with multiple IP
addresses, the SIP
on each IP needs
to be distributed to
different signaling
SMP modules for
processing.

ADD IPDPLC

13

Creating URI
analysis

The URI analysis


is used to analyze
domain names on
routes.

ADD URI

10

11

Creating an IP Link
Prerequisites

Before the operation, it is required to confirm:

The SIP adjacent office is created.

The SMP module with SIP attribute is added.

The MML Terminal window is opened.

Context

This section introduces how to create an IP bearer link used for SIP
signaling. Different bearer information is configured for different
peer-end addresses.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;

142

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

2. Create an IP link used for SIP signaling transfer by executing


command ADD IPLINK.
The explanation of the main parameters in command ADD
IPLINK is shown in Table 59.
TABLE 59 PARAMETERS IN THE ADD IPLINK COMMAND
Parameter
Name

Parameter
Description

Instruction

Peer-end
adjacent office
ID

It is a mandatory parameter.
Enter ID of the adjacent office
connected with this link, which is
associated with the adjacent office
ID configured in the adjacent office
configuration

Module No.

It is a mandatory parameter. It
is the No. of the SMP module
where the Socket associated with
the IP link belongs, which should
be consistent with MODULE in
command ADD MODULE

IP link ID

It is a mandatory parameter, which


is an integer, ranging from 1 to
1024. It is used to identify an IP
link. It cannot be repeated

LOCIP

Local IP

It is a mandatory parameter. Input


the IP address of the local end of
this link, in the format of Local
IP type-Local IP VPN-Local IP
address. At present, the IPV4
address type is used in general

LOCPORT

Local port No.

It is usually set to 5060

REMIP

Peer-end IP

It is a mandatory parameter. Input


the IP address of the peer end of
this link, in the format of Peer-end
IP address type-Peer-end IP
address VPN-Peer-end IP address.
At present, the IPV4 address type
is used in general

REMPORT

Peer-end port
No.

It is usually set to 5060

Transfer
protocol type

It is the transfer protocol type used


by this link, which can be set to
TCP or UDP. The transfer protocol
type should be consistent with that
used by the peer-end IP link

TCP
connection
type

If the PRO is configured as TCP,


this option can set the local end
as the CLT (client) or the SVR
(server) of the TCP. If the PRO
is configured as UDP, it is not
required to configure this option

OFCID

MODULE

ID

PRO

TCPROTO

Confidential and Proprietary Information of ZTE CORPORATION

143

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

TSTIMER

Duration (ms)
of the link test
timer

If it is not required to test the link,


set it to 0

Example: Create a bearer link between the MGCF and the


S-CSCF with the following requirements.

S-CSCF office ID: 12

No. of the SMP module managing this link: 3

User alias: IPLINK-12

IP link ID: 12

Local IP: 10.1.44.77

Peer-end IP: 10.1.33.11

Local port No. and peer-end port No.: 5060

Transfer protocol type: UDP

Other parameters: Adopt the default values.

The command is:


ADD IPLINK:OFCID=12,MODULE=3,NAME="IPLINK-12",I
D=12,LOCIP="IPv4"-"0"-"10.1.44.77",LOCPORT=5060,RE
MIP="IPv4"-"0"-"10.1.33.11",REMPORT=5060,PRO=UDP,T
CPROTO=NULL,TSTIMER=0;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Setting the Capacity for a SIP Module


Prerequisites

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The SMP module with SIP attribute is added.

The MML Terminal window is opened.

Context

This section introduces how to set the capacity for a SIP module
according to the system capacity.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Set the capacity for the SIP module by executing command
SET SIPCAPA.

144

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

The explanation of the main parameters in command SET SIPC


APA is shown in Table 60.
TABLE 60 PARAMETERS IN THE SET SIPCAPA COMMAND
Parameter
Name

SIPSOCKET

SIPTR

SIPTU

SIPTUMSG

Parameter
Description

Instruction

SIP SOCKET data


area capacity

It is an optional parameter,
which is an integer, ranging
from 1 to 1024. It is
configured according to the
system capacity

SIP TR data area


capacity

It is an optional parameter,
which is an integer, ranging
from 1 to 30000. It is
configured according to the
system capacity

SIP TU data area


capacity

It is an optional parameter,
which is an integer, ranging
from 1 to 15000. It is
configured according to the
system capacity

SIP TUMSG data


area capacity

It is an optional parameter,
which is an integer, ranging
from 1 to 7000. It is
configured according to the
system capacity

Example: Set the capacity for the SIP module with the following requirements.

SIP SOCKET data area capacity: 128

SIP TU data area capacity: 15000

SIP TU data area capacity: 9000

SIP TUMSG data area capacity: 4000

The command is as follows.


SET SIPCAPA:SIPSOCKET=128,SIPTR=15000,SIPTU=90
00,SIPTUMSG=4000;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating a Domain where the MGCF


Belongs
Prerequisites

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

Confidential and Proprietary Information of ZTE CORPORATION

145

ZXWN MSCS Data Configuration Guide(MGCF)

The MML Terminal window is opened.

Context

The MGCF system can be configured with one or more domains.


In general, it is configured with one domain.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a domain by executing command ADD REALM.
The explanation of the main parameters in command ADD
REALM is shown in Table 61.
TABLE 61 PARAMETERS IN THE ADD REALM COMMAND
Parameter
Name

Parameter
Description

Instruction

ID

Domain ID

It is an integer, ranging from 1


to 65534. In general, the MGCF
is configured with one domain
whose ID is set to 1

Domain name

It is a mandatory parameter,
consisting of 1 to 63 characters.
When the host name is set, it
is required to add the domain
name of the host after it

REALM

Example: Add a domain with the following requirements.

Domain ID: 1

Domain name: zte.com

The command is as follows.


ADD REALM:ID=1,REALM="zte.com";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating a MGCF Host


Prerequisites

Context

146

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The MML Terminal window is opened.

The host name of the local office must be configured when the
SIP function is used. The MGCF can have one or more hosts, and
each host belongs to one domain. When SIP messages are sent,
the host information is used to construct the parameter contents
in messages From and Contact.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a MGCF host by executing command ADD HOST.
The explanation of the main parameters in command ADD
HOST is shown in Table 62.
TABLE 62 PARAMETERS IN THE ADD HOST COMMAND
Parameter
Name

Parameter
Description

Instruction

ID

Host ID

It is the ID of this host, which is an


integer, ranging from 1 to 65534.
It can not be repeated

HOST

Host name

It is a mandatory parameter,
consisting of 1 to 63 characters.
The host name is composed of
short description and domain
name. For example, a host name
is host1.zte.com, where zte.com is
the domain name

IPV4

IPV4

IPV4 address of this host

IPV6

IPV6

IPV6 address of this host

Example: Add a host with the following requirements.

Host ID: 1

Host name: host1.zte.com

IPV4 address: 11.11.11.1.

The command is:


ADD HOST:ID=1,HOST="host1.zte.com",IPV4="11.11.11.
1";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating Route Selector


Prerequisites

Before the operation, it is required to confirm:


The MML Terminal window is opened.

Context

To implement the MGCF function, SIP routing selectors must be


configured. A routing selector is a set of multiple number analyses,
used to store the analyses of MSISDN, IP numbers and domain

Confidential and Proprietary Information of ZTE CORPORATION

147

ZXWN MSCS Data Configuration Guide(MGCF)

addresses in the IMS domain. In general, one routing selector is


configured.
Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a SIP routing selector by executing command ADD
RTSEL.
The explanation of the main parameters in command ADD
RTSEL is shown in Table 63.
TABLE 63 PARAMETERS IN THE ADD RTSEL COMMAND
Parameter
Name

ID

NAME

Parameter Description

Instruction

SIP route selector ID

It is a mandatory
parameter, which is
an integer, ranging from
1 to 65534

SIP routing selector


name

It is a mandatory
parameter, consisting
of 0~50 characters. It is
used to specify a routing
selector to make it easily
recognized

Example: Create a SIP route selector with the following requirements.

SIP route selector ID: 1

SIP route selector name: RTS1.

The command is:


ADD RTSEL:ID=1, NAME="RTS1";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating Service Group


Prerequisites

Context

148

Before the operation, it is required to confirm:

The routing selector is added.

The MML Terminal window is opened.

Service groups are used to specify the routing selector for a number. Service groups are used by SIP signaling links and entry poli-

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

cies. If more service groups are needed, add new service groups
after setting the default service group.
Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Creating a service group by executing command ADD SRVG.
The explanation of the main parameters in command ADD
SRVG is shown in Table 64.
TABLE 64 PARAMETERS IN THE ADD SRVG COMMAND
Parameter Name

Parameter
Description

Instruction

ID

Service
group ID

It is the service group ID, which is an


integer, ranging from 1 to 65534. It is
numbered from 1

NAME

Service
group name

It is a mandatory parameter,
consisting of 1~50 characters. It is
used to specify a service group

RTSEL

Routing
selector

Enter the routing selector ID, which


is associated with the ID in command
ADD RTSEL

CHGID

Charge Policy
Index

It is an integer, ranging from 1 to


65535

IOI

Inter
Operator
Identifier

It is an optional parameter, consisting


of 0~63 characters.

Example: Create a service group with the following requirements.

Service group ID: 1

Corresponding route selector ID of the service group: 1

The service group is not associated with the billing policy.

The command is:


ADD SRVG:NAME="SRVG1",ID=1,RTSEL=1;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating an Adjacent Host


Prerequisites

Before the operation, it is required to confirm:

Confidential and Proprietary Information of ZTE CORPORATION

149

ZXWN MSCS Data Configuration Guide(MGCF)

The SIP adjacent office is created.

The MML Terminal window is opened.

Context

This section introduces how to create an adjacent host (CSCF or


BGCF) of the MGCF. Multiple adjacent hosts can belong to the same
adjacent office. Each SIP signaling link corresponds to one adjacent host of the MGCF, and it refers to the host ID of the adjacent
host.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create an adjacent host by executing command ADD ADJHO
ST.
The explanation of the main parameters in command ADD
ADJHOST is shown in Table 65.
TABLE 65 PARAMETERS IN THE ADD ADJHOST COMMAND
Parameter
Name

ID

HOSTNAME

REALM

SRVGRP

Parameter
Description

Instruction

Adjacent host
ID

It is the ID of the adjacent


office where the adjacent host
belongs, which is consistent
with the ID in command ADD
ADJOFC.

Host name

It is a mandatory parameter,
consisting of 1 to 63 characters.
It should be consistent with that
of the peer end. The host name
is composed of short description
and domain name. For example,
a host name is scscf.zte.com,
where zte.com is the domain
name

Domain name

It consists of 0 to 63 characters.
It is the name of the domain
where the adjacent host belongs,
which should be consistent with
that of the peer end

Service Group
Number

If the URL in ADD SIPOFC


is not configured as URI, this
option can be set to the default
service group number. If URL
in ADD SIPOFC is configured
as URI, selected the related
service group number

Example: Create a SCSCF adjacent office with the following


requirements.

150

Adjacent host name: SCSCF

Adjacent host ID: 12

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

Name of the domain where the host belongs: zte.com

Topology level: UPPER

Service group number: 1

The command is:


ADD ADJHOST:ID=12,HOSTNAME="SCSCF",REALM="zte.
com",SRVGRP=1;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating UDP Bear


Prerequisites

Before the operation, it is required to confirm:

The SIP adjacent office is created.

The MML Terminal window is opened.

Context

This section introduces how to create a UDP bear. Two modes of


UDP bear are required to be configured. LOCAL_VALID mode of
UDP bear is for relating the local UDP bear ID in ADD IPDPLC
command. REMOTE_VALID mode of UDP bear is for relating the
remote UDP bear ID in ADD SIPLNK command.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create UDP bear. The command is ADD UDPBR.
The explanation of the main parameters in command ADD
UDPBR is shown in Table 66.
TABLE 66 PARAMETERS IN THE ADD UDPBR COMMAND
Parameter
Name

Parameter
Description

Instruction

ID

Bear ID

It is a mandatory
parameter to define
bear ID, ranging from
1 to 65,535.

Alias

It is an optional
parameter for naming
the bear, with a length
ranging from 0 to 50
characters.

NAME

Confidential and Proprietary Information of ZTE CORPORATION

151

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

UDP IP Mode, includes

LOCAL_VALID:
Local IP valid

REMOTE_VALID:
Remote IP valid

IPMODE

The default value is


LOCAL_VALID.

ADJHOST

Adjacent Host

Select the adjacent


host ID configured in
ADD ADJHOST

IPLINK

IP Link ID

Select the IP link ID


configured in ADD
IPLINK

Destination IP Address
Type, includes
DSTADDRTYPE

IPV4: IPV4 addres


type

IPV6: IPV6 addres


type

Currently, IPV4 is
supported.

DSTV4ADDR

Destination IPV4

Destination IPV4
address

DSTVPN

Destination VPN ID

Destination VPN ID

DSTPORT

Destination port

Destination port

Example, Create a UDP bear with the following requirements.

Bear ID: 1

Alias: LOCAL

UDP IP Mode: LOCAL_VALID

The command is as follows.


ADD UDPBR:ID=1,NAME="LOCAL",IPMODE=LOCAL_VALI
D,ADJHOST=0,IPLINK=12,DSTADDRTYPE=IPV4,DSTVPN
=0,DSTPORT=0;
Example, Create a UDP bear with the following requirements.

Bear ID: 2

Alias: REMOTE

UDP IP Mode: REMOTE_VALID

The command is as follows.


ADD UDPBR:ID=2,NAME="REMOTE",IPMODE=REMOTE_V
ALID,ADJHOST=12,IPLINK=0,DSTADDRTYPE=IPV4,DSTV
4ADDR="10.1.33.11",DSTVPN=0,DSTPORT=5060;
END OF STEPS
Result

152

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

Creating a SIP Signaling Link


Prerequisites

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The adjacent host is added.

The MML Terminal window is opened.

Context

Signaling links are the physical channels bearing signaling messages. For the adjacent office connected with the MGCF through
SIP, it is required to configure SIP signaling links.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a SIP signaling link by executing command ADD SIPL
NK.
The explanation of the main parameters in command ADD
SIPLNK is shown in Table 67.
TABLE 67 PARAMETERS IN THE ADD SIPLNK COOMMAND
Parameter Name

Parameter
Description

Instruction

ID

Signaling link ID

It is the SIP signaling link ID,


which is an integer, ranging
from 1 to 65534. It is referred
to in the SIP signaling route
configuration

NAME

Signaling link
name

It is a mandatory parameter,
consisting of 0~50 characters. It
is the SIP signaling link name

Bearer ID

It is a mandatory parameter. It
is the IP link ID associated with
this SIP signaling link, which
is consistent with the ID in
command ADD IPLINK

Sending Heart
Beat Interval(s)

It is the interval of sending link


heartbeat test messages, used
to test the link connection. It
ranges from 0 to 3600 (s). If this
option is set to 0, means disable
heartbeat monitor.

BRID

HBTIME

Example: Create a SIP signaling link with the following requirements.

Link ID: 12

Link name: SCSCFLINK

Confidential and Proprietary Information of ZTE CORPORATION

153

ZXWN MSCS Data Configuration Guide(MGCF)

Bear ID: 2

Adjacent office connected with this link: S-CSCF

The command is:


ADD SIPLNK:ID=12,NAME="SCSCFLINK",BRID=2,HBTIM
E=0,NORMALHBTIME=120,UNUSECNT=3,USECNT=3;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating a SIP Signaling Route


Prerequisites

Before the operation, it is required to confirm:

The SIP signaling link is configured.

The MML Terminal window is opened.

Context

For the adjacent office connected with the MGCF through SIP, it
is required to create signaling routes. Each SIP signaling route
contains at most 12 SIP signaling links.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a SIP signaling route by executing command ADD
SIPRT.
The explanation of the main parameters in command ADD
SIPRT is shown in Table 68.
TABLE 68 PARAMETERS IN THE ADD SIPRT COMMAND
Parameter Description

Instruction

ID

Route ID

It is the SIP signaling route ID, which


is an integer, ranging from 1 to
65534. It is referred to in the SIP
signaling route group configuration

NAME

Route
name

It is a mandatory parameter,
consisting of 0~50 characters. It is
the SIP signaling route name

SPLC

Link
selecting
policy

It is a mandatory parameter. It is the


policy for selecting SIP links managed
by the signaling route. It can be
configured to SEQ and RND. SEQ
indicates that links are selected based

Parameter
Name

154

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

Parameter
Name

Parameter Description

Instruction
on priority, while RND indicates that
links are selected based on order

Signaling
link ID

LNK

It is a mandatory parameter. It is the


ID of the SIP signaling link managed
by the SIP signaling route. It is
consistent with the ID in command
ADD SIPLNK. One SIP signaling
route can be configured with at most
12 links

Example: Create a SIP signaling route with the following requirements.

Route ID: 12.

Signaling route name: SCSCFR

Link selecting policy: SEQ

Signaling link ID: 12

The command is:


ADD
2";

SIPRT:ID=12,NAME="SCSCFR",SPLC=SEQ,LNK="1

END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating a SIP signaling Route Set


Prerequisites

Before the operation, it is required to confirm:

The SIP signaling route is configured.

The MML Terminal window is opened.

Context

For the adjacent office connected with the MGCF through SIP, it is
required to create signaling route sets. Each SIP signaling route
group contains at most 4 SIP signaling routes.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a SIP signaling route set by executing command ADD
SIPRTS.
The explanation of the main parameters in command ADD
SIPRTS is shown in Table 69.

Confidential and Proprietary Information of ZTE CORPORATION

155

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 69 PARAMETERS IN THE ADD SIPRTS COMMAND


Parameter Name

Parameter
Description

Instruction

ID

Route group ID

It is a mandatory parameter,
which is an integer, ranging
from 1 to 65534. It is the
SIP signaling route group ID,
which cannot be repeated in
the system

NAME

Route group name

It is a mandatory parameter,
consisting of 0~50 characters.
It is the SIP signaling route
group name

Route Select Policy,


includes
RTPLC

SIPRT

SEQ: Sequential

PCT: Percent

Route ID

It is a mandatory parameter
with a default value of SEQ

It is a mandatory parameter.
It is the ID of the SIP signaling
route managed by the SIP
signaling route group. It
is consistent with the ID in
command ADD SIPRT. One
SIP signaling route group can
be configured with at most 4
routes

Example: Create a SIP signaling route group with the following


requirements.

Route ID: 12

Signaling route group name: SCSCFRS

Route Select Policy: Sequential

Route group ID: 12.

The command is:


ADD SIPRTS:ID=12,NAME="SCSCFRS",RTPLC=SEQ,SIPR
T="12"-"0";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating IP Distribution Policy


Prerequisites

156

Before the operation, it is required to confirm:

The number of exchange to be configured is known.

The SIP access address is configured.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

The MML Terminal window is opened.

Context

When the MGCF can be configured with multiple IP addresses, the


SIP on each IP needs to be distributed to different signaling SMP
modules for processing. The IP distribution policy implements the
service allocation of the signaling SMP module processing SIP.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create IP distribution policy by executing command ADD IPDP
LC.
The explanation of the main parameters in command ADD
IPDPLC is shown in Table 70.
TABLE 70 PARAMETERS IN THE ADD IPDPLC COMMAND
Parameter
Name

Parameter
Description

Instruction

ID

IP distribution
policy ID

It is an integer, ranging from 1


to 65535

NAME

IP distribution
policy name

It is a mandatory parameter,
consisting of 1~50 characters.
It is the IP distribution policy
name

IP address type

It is the IP address type of the


local office, which can be set to
IPV4 or IPV6. When it is set
to IPV4, configure the IPV4
subnet and subnet mask. When
it is set to IPV6, configure the
IPV6 subnet and subnet mask

IPV4 subnet

It is the subnet number of the


IPV4 address of the local office.
When ADDRTYPE is set to
IPV4, the IPV4 address needs
to be configured

IPV6 subnet

It is the subnet number of the


IPV6 address of the local office.
When ADDRTYPE is set to
IPV6, the subnet number of
the IPV6 address needs to be
configure

V4MSK

IPV4 subnet mask

It is the subnet mask of the


IPV4 address of the local office.
When ADDRTYPE is set to
IPV4,, the subnet mask of
the IPV4 address needs to be
configure

V6MSK

IPV6 subnet mask

It is the subnet mask of the


IPV6 address of the local office.
When ADDRTYPE is set to

ADDRTYPE

V4NET

V6NET

Confidential and Proprietary Information of ZTE CORPORATION

157

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction
IPV6, the subnet mask of
the IPV6 address needs to be
configure

Distribution
policies of UDP,
including:
DEF: Default
distribution
UPLC

PRIROR:
Excellent choice
priority

Selct PRIROR or LOADSHARE, DO NOT select DEF.

LOADSHARE:
Load share
priority
UDPID

UDP Bear ID

Select the Bear ID configured


in ADD UDPBR command

Example: Create an IP distribution policy with the following


requirements.

IP distribution policy name: MGCF11

IP distribution policy ID: 1

The local office uses the IPV4 address

IPV4 subnet: 10.1.33.11

IPV4 subnet mask: 255.255.255.0

UDP distribution policy: Excellent choice priority

UDP Bear ID: 1

The command is:


ADD IPDPLC:ID=1,NAME="MGCF11",ADDRTYPE=IPV4,V
4NET="10.1.33.11",V4MSK="255.255.255.0",PORT=0,UPL
C=PRIROR,UDPID="1";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating URI Analysis


Prerequisites

158

Before the operation, it is required to confirm:

The number of exchange to be configured is known.

The outgoing SIP signaling route group is added.

The routing selector is added.

The MML Terminal window is opened.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

Context

The URI analysis is used to analyze domain names on routes. Different URI numbers can be analyzed to different results.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create URI analysis by executing command ADD URI.
The explanation of the main parameters in command ADD URI
is shown in Table 71.
TABLE 71 PARAMETERS IN THE ADD URI COMMAND
Parameter
Name

Parameter Description

Instruction

RTSEL

Routing selector

It is a mandatory
parameter, which should
be consistent with the
ID in command ADD
RTSEL

URI

Uniform Resource
Identifier

It is a mandatory
parameter, consisting
of 1~50 characters. It
is the analyzed domain
name

SIP methods, including

METHOD

SIPRTS

ACK

BYE

CANCEL

INFO

INVITE

MESSAGE

NOTIFY

OPTIONS

PRACK

PUBLISH

REFER

REGISTER

SUBSCRIBE

UPDATE

SIP signaling routing


group

It is a mandatory
parameter. In general,
it is configured to ACK,
BYE, CANCEL, INVITE,
PRACK, or UPDATE

It is the outgoing route


group ID, which is
associated with the ID in
command ADD SIPRTS

Example: Create URI analysis with the following requirements.

Confidential and Proprietary Information of ZTE CORPORATION

159

ZXWN MSCS Data Configuration Guide(MGCF)

Routing selector: 1

Uniform Resource Identifier: scscf.zte.com

SIP method: ACK&BYE&CANCEL&INVITE&PRACK&UPDATE

SIP signaling route group: 12 (pointing to S-CSCF)

Other parameters: Adopt the default values.

The command is:


ADD
URI:RTSEL=1,URI="scscf.zte.com",METHOD="ACK
"&"BYE"&"CANCEL"&"INVITE"&"PRACK"&"UPDATE",SIPRTS
=12;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating an RTP Trunk


Group
Prerequisites

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The adjacent SIP office to which the trunk group points is created.

The trunk group No. range is set in the resource management


system.

The MML Terminal window is opened.

Context

When the MSCS servers as a MGCF, the MGCF needs to control


the IP resources from the IM-MGW to the IMS domain through the
RTP trunk group configuration data. In this case, SIP trunk groups
need to be configured.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Creating a RTP trunk group by executing command ADD TG
RTP.
The explanation of the main parameters in command ADD TG
RTP is shown in Table 72.

160

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

TABLE 72 PARAMETERS IN THE ADD TG RTP COMMAND


Parameter
Name

TG

OFC

NAME

MODULE

Parameter
Description

Instruction

Trunk group ID

It is a mandatory
parameter. It is used
to define a trunk group.
This trunk group can be
BICC trunk group or SIP
trunk group. It is a global
unified number

ID of the office where


the trunk group
belongs

It is a mandatory
parameter. It is used to
specify the corresponding
office of the trunk group.
This parameter must be
defined by command ADD
ADJOFC at first. Then it
can be indexed here

User alias

It is an optional parameter,
consisting of 0~50
characters. It is used
to specifically describe a
trunk group to make it
easily recognized

Module where the


trunk group belongs

It is a mandatory
parameter, which is an
integer, ranging from 1
to 127. It is used to
specify the SMP module of
processing traffic on this
trunk group

Inter-office line
signal identification,
including
SIGLINE

BICC (BICC
signaling)

SIP (SIP
signaling)

It is an optional parameter.
Select SIP for the MGCF.

Trunk group types,


including the following
three types:

KIND

IN (incoming trunk
group): Indicates
that the local
office processes the
incoming calls from
the peer-end office.
OUT (outgoing trunk
group): Indicates
that the local office
only processes the
outgoing calls to the
peer-end office.

It is an optional parameter.
BIDIR is selected by
default. It should be
negotiated with the
peer-end office.

BIDIR (Two-way
trunk group):
Indicates that the local

Confidential and Proprietary Information of ZTE CORPORATION

161

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

office processes both


the incoming calls
from the peer-end
office and the outgoing
calls to the peer-end
office
Bearer establishment
direction, including
the following three
types:

BWAY

NODIR (No
direction): The
inter-office bearer
is established without
direction.
BACK: The inter-office
bearer is established
based on the backward
mode.

It is an optional parameter.
For RTP trunk groups, it
is set according to the
network plan of operators

FORWD: The
inter-office bearer
is established based
on the forward mode
THD

Threshold for overload


control

It is an optional parameter,
ranging from 0 to 100, with
a default of 100

Circuit selecting
modes, including:
MIN: Every time when
the system selects a
trunk circuit, it always
begins with the circuit
with the minimum
number. This mode
can implement the
preferred plan of trunk
circuits.

CICSEL

MAX: Every time


when the system
selects a trunk
circuit, it always
begins with the circuit
with the maximum
number. This mode
can implement the
preferred plan of trunk
circuits.
CYC: Every time when
the system selects
a trunk circuit, it
always begins with the
circuit next to the one
previously selected.
Suppose the numbers
of the trunk circuits
in a trunk group in
ascending order are
TKC0, TKC1, . ,

162

Confidential and Proprietary Information of ZTE CORPORATION

It is an optional parameter,
with a default of CYC. In
general, the signaling point
with big code prefers the
circuit with an even number,
while the one with small
code prefers the circuit
with an odd number. It
should be negotiated with
the peer-end office

Chapter 5 MGCF-SIP Office Interconnection Data Configuration

Parameter
Name

Parameter
Description
TKCn. If TKC0 is
selected at the first
time, the system will
select the trunk circuit
in the order of TKC0
TKC1TKCnTK
C0TKC1TKCn.

Instruction

ODD: Every time


when the system
selects a trunk circuit,
it always selects the
circuit with an odd
number.
EVEN: Every time
when the system
selects a trunk circuit,
it always selects the
circuit with an even
number.
IDLE: Every time
when the system
selects a trunk circuit,
it always selects the
idlest circuit.
BUSY: Every time
when the system
selects a trunk circuit,
it always selects the
busiest circuit

DAS

SIPDAS

DAS for the called


number

It is an optional parameter,
which is an integer ranging
from 0 to 4096, with a
default of 0. When the
local office has the GMSC
function, this DAS is used to
analyze the called number
from other offices. When
the called number is from
the BSC office, this DAS is
meaningless, and does not
need to be configured

DAS for the domain


name of the called
number during SIP
outgoing calls

It is used get the name


of the IMS domain where
the called party is located
through analyzing the
called number during a
SIP outgoing call. If the
outgoing SIP trunk group
is configured with this
DAS, the invite message
during a SIP outgoing call
can only contain SIP URL
mode. If the outgoing
SIP trunk group is not
configured with this DAS,
configure the URLOPT in
the SIP adjacent office
configuration to decide
whether the outgoing call
uses TEL or SIP URL mode.

Confidential and Proprietary Information of ZTE CORPORATION

163

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction
After this DAS is used
on this trunk group, all
outgoing calls on this
trunk group will get the
corresponding domain
name according to the
called number, and then
form a SIP URL

OPDAS

DAS for the calling


number

It is an optional parameter,
which is an integer ranging
from 0 to 4096, with a
default of 0. When the
local office has the GMSC
function, this DAS is used to
analyze the calling number
from other offices. When
the calling number is from
the BSC office, this DAS is
meaningless, and does not
need to be configured

Example: Create a SIP trunk group with the following requirements.

Trunk group ID: 12

ID of the office where the trunk group belongs: 12

User alias: SCSCF

No. of the module processing the trunk group: 0

Inter-office line signal identification: SIP

SIP route set: 12

Other parameters: Adopt the default values.

The command is:


ADD TG RTP:TG=12,OFC=12,MODULE=0,NAME="SCSCF
",SIGLINE=SIP,KIND=BIDIR,BWAY=NODIR,THD=100,CI
CSEL=CYC,DAS=0,SIPDAS=0,OPDAS=0,PREDAS=0,DDI
=0,OPDDI=0,MINNAT=0,MAXNAT=26,MININT=0,MAXI
NT=26,INREG=INVALID,OUTREG=INVALID,COLEN=10,B
USYRATE=100,ROAMDAS=0,Q850CCIDX=0,SMENTERID
=0,MLPPDM=4294967295,SIPRUTS=12,DISINDEX=0;
END OF STEPS
Result

164

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

MGCF-Other-Exchange
Interconnection Data
Configuration
Table of Contents
Networking Mode............................................................. 165
Office Interconnection in IP Domain ................................... 166
TDM Office Interconnection ............................................... 181

Networking Mode
Overview

When MGCF is interconnected with the equipment (such as MSCS,


2G MSC/PSTN) at the network side, the interfaces between them
fall into TDM-type or IP-type according to different bearer modes,
as described in Table 73. These interfaces may also fall into directassociated mode and quasi-associated mode according to their
connection method. You should select the corresponding configuration method according to the actual networking condition.
TABLE 73 BEARER MODES OF MAIN INTERFACES
Interconnected Equipment

Interface

Bearer Mode

MSCS

Nc

IP

2G MSC/PSTN

Ai

TDM/IP

Take the interconnection between 2G MSC and MGCF/IM-MGW for


example. When the traffic bearer is TDM bearer or IP bearer, 2G
MSC is directly connected with IM-MGW. However, the signaling
modes between 2G MSC and MGCF divide into the following three
types.
1. 2G MSC is connected with MGCF in TDM bearer mode.
When 2G MSC is interconnected with the MGCF in TDM bearer
mode, they only transmit the narrowband signaling.
i. 2G MSC<->MGCF
2G MSC is directly associated with MGCF in a TDM bearer
mode.

Confidential and Proprietary Information of ZTE CORPORATION

165

ZXWN MSCS Data Configuration Guide(MGCF)

ii. 2G MSC<->STP<->MGCF
2G MSC is quasi-associated with MGCF through STP in TDM
bearer mode.
This method is applicable to the interconnection between two
devices in the circuit domain, which requires configuring the
narrow-band signaling processing board SPB on MGCF.
2. 2G MSC is connected with MGCF in an IP bearer mode.
2G MSC is directly connected with MGCF in an IP bearer
mode. The signaling between them is transmitted through
SIGTRAN. The upper-layer signaling, such as BICC, is borne
through M3UA/SCTP or SCTP. This method is applicable to the
interconnection between two devices in the IP domain.
3. 2G MSC is connected with MGCF in IP bearer and TDM bearer
modes.
The signaling adaptation between 2G MSC and MGCF is implemented through an intermediate node, which is IM-MGW usually. The signaling is transmitted by the path of 2G MSC<->IMMGW<->MGCF, where the narrow-band signaling is transmitted between 2G MSC and IM-MGW, and SIGTRAN is transmitted
between IM-MGW and MGCF.
The signaling may also be switched on IM-MGW in M3UA or
M2UA mode.

When MGCF and IM-MGW adopt different signaling points,


M3UA transfer mode is usually adopted.
When MGCF and IM-MGW adopt the same signaling point,
M3UA proxy mode is usually adopted.
When MGCF and IM-MGW adopt the same signaling point,
and MGCF manages several IM-MGWs that are all connected with MGCF, M2UA transfer mode may be adopted.

Office Interconnection in IP
Domain
Overview
Introduction

This section describes the procedure for configuring the office interconnection in the IP domain.
There are the following three interconnection modes in the IP domain.
1. Direct-associated office in the IP domain
The office is directly connected with MGCF in IP bearer mode.
2. M3UA-transferred office

166

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

MGCF and its opposite-end office provide IP and TDM bearers respectively. The signaling between them is transferred by
IM-MGW in M3UA mode.
3. M2UA-transferred office
MGCF and its opposite-end office provide IP and TDM bearers respectively. The signaling between them is transferred by
IM-MGW in M2UA mode.

Direct-Associated Office
Configuration in IP Domain
The direct-associated office in the IP domain is the office directly
connected with MGCF in the IP bearer mode. For example, MGCF
and MSCS are connected through an Nc interface.

Overview
Configuration
Flow

Figure 54 shows the flow of configuring a direct-associated office


in the IP domain.
FIGURE 54 FLOW OF CONFIGURING A DIRECT-ASSOCIATED
OFFICE IN IP DOMAIN

Flow Description

Perform the following steps.

Confidential and Proprietary Information of ZTE CORPORATION

167

ZXWN MSCS Data Configuration Guide(MGCF)

Steps

Operations

Instructions

Commands

Creating an
Adjacent Office

Create other
interconnected office
at the network side,
except for IM-MGW.
Select a different
adjacent office type.

ADD ADJOFC

Creating an MSCS
Topological Node

The topological node of


the opposite-end MSCS
office is configured
during the Nc interface
configuration.

ADD TOPO

SIGTRAN protocol
configuration

It is similar to the
SIGTRAN configuration
on the Mn interface,
refer to Overview.

Creating an Adjacent Office


Prerequisites

Before the operation, it is required to confirm:

The signaling interworking data planning and negotiation between MSCS and other office are completed.

The data configuration of local office is completed.

The basic configuration of the local office is completed.

The MML Terminal window is opened.

Context

Perform this procedure to configure the basic information of an


inteconnected adjacent office.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create an adjacent office. The command is ADD ADJOFC.
Table 74 describes the main parameters in the ADD ADJOFC
command.
TABLE 74 PARAMETERS IN THE ADD ADJOFC COMMAND
Parameter
Name

ID

168

Parameter
Description

Instruction

Office ID

A mandatory parameter,
indicating the identification
number of the adjacent
office, and ranging from 1
to 3000. In general, it is
configured as the exchange
ID of the adjacent office
during the all-network
planning

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction

NAME

User-defined alias

It is a mandatory parameter.
Type a customized name

NET

Network type

A mandatory parameter,
indicating the network
type of the SPC used for
connecting the local office
to the adjacent office when
the local office is configured
with several SPs. The
default is the network type
of this SP when there is only
one SP in the local office

OFCTYPE

The type of adjacent


office

It is a mandatory parameter.

SPCFMT

SPC format

Select TRIPLE_DEC

SPCTYPE

SPC type

DPC

Destination SPC

RC

Area code

It is a mandatory parameter.
Select it based on the SPC
type of the adjacent office
according to the signaling
point planning. In China,
all the NEs adopt the 24-bit
SPC
It is an optional parameter,
indicating the local toll zone
code of the adjacent office.
This parameter has impact
on the area code added by
the calling number

Association type,
including:

AM_SURE
(direct
connection mode)

AM_QUASI (half
direct connection
mode)

AM_NONE (none
connection mode)

ASSOTYPE

SPTYPE

Signaling point type,


including SEP, STP
and STEP

It is an optional parameter.
Select AM_SURE

It is an optional parameter.
Select SEP (signaling end
point), STEP (signaling
transfer/end point) or STP
(signaling transfer point)
according to the role of
the adjacent office in the
signaling network.

Confidential and Proprietary Information of ZTE CORPORATION

169

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

Subservice function,
including

INTERNATIONAL (International signaling


point code)

INTERNATIONAL
STANDBY (International
standby signaling point code)

SSF

NATIONAL
(National
signaling point
code)

NATIONAL
STANDBY
(National standby
signaling point
code).

It is an optional parameter.
In general, NATIONAL is
selected at home.

Office Attribute,
including:
TAG

ISNI (Has ISNI


Function)
TRANS (Translate
Node)

It is an optional parameter

TEST (Need Test


Info:0X02/0X01)

TEST

Test flag

It is an optional parameter.
It is used to set whether the
MTP3 link actively initiates
the link test after entering
the service status. In most
cases, this parameter is
selected.
It is an optional parameter
with a default of NO. It
is used for SCCP to judge
whether to use the LUDT
message.

BANDFLAG

Broadband attribute

The maximum length of a


broadband link message
is 4,000, and that of a
narrowband link message
is 255. Because the MTP
layer does not have the
segmentation function, the
incorrect configuration of
this parameter probably
causes the long packet to
be discarded.
Select YES when all the
links between two SPs are

170

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction
SIGTRAN or ATM signaling
links.

Protocol Type,
including:

CHINA (China)

ITU (International Telecommunications


Union)

ANSI (American
National
Standards
Institute)

PRTCTYPE

CLST

Cluster ID

It is an optional parameter.
The CHINA and the ITU are
used for the NO.7 signaling
networking of the ITU
standard and the ANSI is
used for the NO.7 signaling
networking of the American
standard. In general, select
CHINA for the domestic
office and select ITU for the
international office
It is an optional parameter
within 0~65535. In
general, select the default
value 65535. It is valid
when the protocol type
of the adjacent office is
ANSI. The signaling point
connected to the signaling
transfer point belongs to the
corresponding cluster. The
cluster ID is configured in
the command ADD CLST

Office Info, including:


CIC_PCM (CIC starts
the load sharing
according to the PCM
code mode)
BLOCK (Manual block
status)

INFO

EVEN_CIC (The
office controls the
even CIC when CIC
resource contention
occurs)

It is an optional parameter
and the default value is
CIC_PCM

CALLING ( Calling
transform is allowed)
CALLED (Called
transform is allowed)
MOD24_CIC (CIC
mode with 24 mode)
TEST (Dynamic
observation)

Confidential and Proprietary Information of ZTE CORPORATION

171

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

RELATEDOFC1

Related Office ID

It is an optional parameter
ranging from 0 to 3000

Office Extend Info,


including:

SIGBRDCST
(Support Signa
ling Broadcast
Message)

MTP (Hongkong
MTP Standard)

DUPU ( Screen
DUPU message)

SUA_REC_DT1
(Receive SUA
message and
handle it as DT1
message)

INFOEX

SUA_SND_DT1
(Send SUA
message and
handle it as DT1
message without
SN.)

OPEN_TG_RES
(Open outter
trunk group
resource)

It is an optional parameter

For example, configure the MSCS adjacent office. The network type is 1, the alias is MSCS105, the signaling point code
is 3.105.1 the signaling point code format is 24, the association type is AM_SURE, and the office type is LOCAL&DOMTOLL&OA&MSCSERVER For other parameters, select the default value. The command is as follows:
ADD ADJOFC:ID=105,NAME="MSCS105",NET=1,OFCTYP
E="LOCAL"&"DOMTOLL"&"OA"&"MSCSERVER",SPCFMT=TR
IPLE_DEC,SPCTYPE=24,DPC="3.105.1",RC="25",ASSOTY
PE=AM_SURE,SPTYPE=SEP,SSF=NATIONAL,SUBPROTTYP
E=DEFAULT,TEST=YES,BANDFLAG=NO,PRTCTYPE=CHIN
A,CLST=65535,INFO="CIC_PCM",RELATEDOFC1=0;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating an MSCS Topological Node


Prerequisites

Before the operation, it is required to confirm:

172

The encoding and decoding speech template configuration is


completed.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

The range of topological nodes is configured in the resource


management.

The MML Terminal window is opened.

Context

For Nc interface, the topological node of the opposite-end MSCS


office needs to be configured.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Configure an MSCS topological node. The command is ADD
TOPO.
Table 75 describes the main parameters in the ADD TOPO
command.
TABLE 75 PARAMETERS IN THEADD TOPO COMMAND
Parameter
Name

Parameter
Description

Instruction

Topological node ID

It is a mandatory parameter.
For identifying this node
with a serial number,
ranging from 1 to 3000.
It is recommended to be
consistent with the office ID
of this node

OFCID

Office ID

It is a mandatory parameter
for specify the office ID of
this topological node. This
parameter must be defined
by the ADD ADJOFC
command first. Type the
MSCS office ID according to
the actual conditions.

NAME

Alias

It is a mandatory parameter
for describing a topological
node, with a length ranging
from 1 to 50 characters.

CODEC identity

It is a mandatory parameter
for specify the CODEC
template used by this
topological node. This
parameter must be defined
by the ADD CODECTPL
command first.

ETYPE

Equipment type

This parameter is used to


specify the NE equipment
type of this topological
node. Select MSCS for an
MSCS device.

PROTTYPE

Protocol type

Select BICC for an Nc


interface.

ID

CODECID

Confidential and Proprietary Information of ZTE CORPORATION

173

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

IPVER

ATTR

Parameter
Description

Instruction

IP version of the node

This parameter indicates


the IP protocol version
supported between nodes.
Select IPV4 or IPV6
according to the actual
conditions. Currently, it is
usually configured as IPV4

Bearer attributes

This parameter is only valid


for the node with the type
of R4GW (MGW). You need
not to configure it for an
MSCS topological node.

Extended attributes
(tunnel mode),
including:

NOTUNL (None
tunnel mode)

RTUNL (Rapid
tunnel mode)

DTUNL (Delay
tunnel mode)

ATTR2

Signaling transfer
mode, including:
TRFMOD

MCINTF (Mc
interface signal
transfer mode)

This parameter sets which


tunnel mode is used for
setting up a bearer when
this node supports the
IP/RTP bearer, with a
default of NOTUNL (None
tunnel mode).

This parameter is used


to set that mode used by
the topology for reporting
the detected CNG or CED
fax signals, with a default
of MCINTF (Mc interface
signal transfer mode).

DTMFTC

Tandem office send


DTMF use TC mode,
including NO (No)
and YES (Yes)

This parameter designates


whether TC resources are
used during DTMF number
delivery, with a default of
NO

MGWCON

MGW congestion
reporting capability,
including SMGWCON
(standard MGW
congestion event)
and CMGWCON
(custom MGW
congestion event)

This parameter designates


the MGW congestion
reporting capability, with
a default of SMGWCON
(standard MGW congestion
event).

Example: Create an MSCS topological node with the following


requirements.

MSCS office ID: 105

Equipment type: MSCS

Protocol type: BICC

CODEC ID: 1

Other parameters: Default.

The specific command is as follows.

174

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

ADD TOPO:ID=105,OFCID=105,NAME="MSCS105",CODE
CID=1,ETYPE=MSCS,PROTTYPE=BICC,IPVER=IPV4,ATT
R2=NOTUNL,TRFMOD=MCINTF,UPERRCTRL=YES,DTMFTC
=NO,MGWCON=SMGWCON,AUTOFAX=YES,OOBTC=NO,B
CUID=0,SENDCAP=NO,G711TRAN=NO,BICCDTMF=TRAN
SPARENT,IPBCP2833=BYMGW,BICCDTMPPER=0,AOIPPR
O=PRIVATE;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

M3UA-Transferred Office
Configuration
Description

MGCF and its opposite-end office provide IP and TDM bearers respectively. The signaling between them is transferred by IM-MGW
in M3UA mode.

Networking mode

Take the quasi-associated networking (M3UA-based) between


MGCF and 2G MSC/PSTN for example. Figure 55 shows its
interface protocol stack.
FIGURE 55 QUASI-ASSOCIATED NETWORKING BETWEEN MSCS
AND 2G MSC/PSTN (BASED ON M3UA)

The connection between MGCF and IM-MGW is in the IP bearer


mode, and the connection between IM-MGW and 2G MSC/PSTN is
in the TDM bearer mode. Therefore, to configure the interworking
data between MGCF and 2G MSC/PSTN, you only need to create a
2G MSC/PSTN adjacent office on the MGCF, and to configure the
SIGTRAN data between MGCF and IM-MGW to make the IM-MGW
complete the signaling transit. In this case, the IM-MGW serves
as a signaling gateway, working in a switching mode.
Configuration
Description

Figure 56 shows the flow of configuring an M3UA transit exchange.

Confidential and Proprietary Information of ZTE CORPORATION

175

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 56 FLOW OF M3UA TRANSIT EXCHANGE

Perform the
following steps.

Steps

176

Operations

Configuration
Description

Reference

Creating an
adjacent
office

Create other interconnected


office at the network side,
except for IM-MGW. Select
a different adjacent office
type. It is required that
the network type of this
adjacent office is consistent
with the IM-MGW network
type configured for this
group of associations.

Creating an
Adjacent
Office

SIGTRAN
configuration

Based on the principles


of SCTP Planning, specify
the office ID parameter
in the SIO-locating-AS
configuration to be
consistent with the office ID
of the adjacent office that is
switched through IM-MGW,
when the association
between IM-MGW and
MGCF is configured.

Overview

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

M2UA-Transferred Office
Configuration
Overview
Introduction

MGCF and its opposite-end office provide IP and TDM bearers respectively. The signaling between them is transferred by IM-MGW
in M2UA mode.

Networking mode

Take the quasi-associated networking (M2UA-based) between


MGCF and 2G MSC/PSTN as an example. Figure 57 shows its
interface protocol stack.
FIGURE 57 QUASI-ASSOCIATED NETWORKING BETWEEN MGCF
AND 2G MSC/PSTN (BASED ON M2UA)

The connection between MGCF and IM-MGW is in the IP bearer


mode, and the connection between IM-MGW and 2G MSC/PSTN is
in the TDM bearer mode. When the signaling is transferred in the
M2UA mode, IM-MGW serves as SG to only complete the adaptation of the MTP2-layer protocol, and transparently transmits the
MTP3 layer protocols to the MGCF for processing. Therefore, you
only need to configure the No. 7 signaling data on the MGCF, which
are transmitted to the adjacent office.
Configuration flow

Figure 58 shows the flow of configuring an M2UA transit exchange.

Confidential and Proprietary Information of ZTE CORPORATION

177

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 58 FLOW OF M2UA TRANSIT EXCHANGE

Flow Description

178

Perform the following steps.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

Steps

Operations

Instruction

Reference

Creating an
adjacent office

Create other
interconnected office at
the network side, except
for MGW. Select a different
adjacent office type.

Creating an
Adjacent
Office

Creating an
SCTP

OFCID: select the adjacent


office ID configured in
Step 1.

Creating an
SCTP

PROT: Select M2UA


3

Creating an
ASP

Creating an
ASP

PROT: Select M2UA


4

Creating an AS

EXISTCTX: No routing
context is configured
ASTAG: Select ASP on
MSCS.

Creating an
AS

ASUP: Select NULL

Creating a
signaling link
set

Select the type of this


signaling link set according
toits signaling link type. In
general, select N64 (64K
narrowband link set).

Creating a
Signaling Link
Set

Creating an
M2UA IP link

Creating an
M2UA IP Link

Creating a
signaling route

Creating a
Signaling
Route

Creating a
signaling office

Creating a
Signaling
Office

Creating an M2UA IP Link


Prerequisites

Before the operation, it is required to confirm:

The signaling link group configuration is completed.

The MML Terminal window is opened.

Context

When IM-MGW forwards signaling in the M2UA mode, the M2UA


IP link connection to the adjacent office should be configured. The
signaling link is accessed through SIPI board, and SIGTRAN protocol is used for transmission.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create an M2UA IP link. The command is ADD M2UAIPLNK.

Confidential and Proprietary Information of ZTE CORPORATION

179

ZXWN MSCS Data Configuration Guide(MGCF)

Table 76 describes the main parameters in the ADD M2UAIP


LNK command.
TABLE 76 PARAMETERS IN THE ADD M2UAIPLNK COMMAND
Parameter
Name

Parameter
Description

Instruction

Signaling link set


ID

It is a mandatory parameter.
Type the link set No. of
this link, ranging from 1 to
1024.Which is associated with
the ID of the signaling link set
that is created

Signaling link set


code

It is an optional parameter
to configure the SLC of this
signaling link. It needs to be
consistent with the SLC of
the same signaling link of the
opposite-end office

SMP module No.

It is a mandatory parameter.
Type the No. the SMP module
that processes this link,
ranging from 1 to 127

Destination AS ID

It is a mandatory parameter.
Type the AS No. used by this
signaling link, ranging from 1
to 640. In this case, type the
AS ID whose adaptation layer
is M2UA

Link number

It is an optional parameter,
designating the global No. of
the signaling link on the MSCS.
It ranges from 1 to 5000

NAME

Alias

It is a mandatory parameter,
for describing the name of
this signaling link for easy
identification

IIDTYPE

Interface ID
type, including
INT(Integer
Type),
TEXT(Text
Type and
BOTH(Integer
and Text Type)

The parameter indicates the


interface ID type. Currently,
only the integer type is
supported.

IID

Interface ID

The parameter ranges from 0


to 4294967295

LOOP

Self loop,
including options:
NO(Not Self
Loop) and
YES(Self Loop)

The parameter indicates


whether the link is at a self
loop status.

LKSID

SLC

MODULE

ASID

ID

Example: Create an M2UA IP signaling link connecting to a 2G


MSC office with the following requirements.

180

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

Link set ID: 2

SMP module No.: 3

Destination AS ID: 2

Link No.: 2

Alias: MSC

ID of it in the signaling link set: 0

Other parameters: default.

The specific command is as follows.


ADD M2UAIPLNK:LKSID=2,SLC=0,MODULE=3,ASID=2,I
D=2,NAME="MSC",IIDTYPE=INT,LOOP=NO;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

TDM Office Interconnection


Overview
Introduction

TDM office refers to the office connecting with MGCF through TDM
bearer. To configure a direct-associated office, you need to configure signaling link set, signaling link, signaling route, and signaling
office. To configure a quasi-associated office, you only need to
configure the signaling office.

Configuration
Flow

Figure 59 shows the flow of configuring the interconnection data


between MGCF and TDM office.

Confidential and Proprietary Information of ZTE CORPORATION

181

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 59 TDM OFFICE INTERCONNECTION CONFIGURATION


FLOW

Flow Description

Perform the following steps.


Steps

Operations

Instructions

Command

Creating signaling
link set

Configure a
narrowband
signaling link set
to the adjacent
office.

ADD N7LKS

Create SPB
signaling link

Configure a
narrowband
signaling link
to the adjacent
office.

ADD N7LNKE1

182

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

Steps

Operations

Instructions

Command

Create signaling
route

The signaling
routing
configuration
is used for
specifying the
signaling link set
to be selected and
the method when
the signaling
selects a route.

ADD N7ROUTE

Create signaling
office

Configure the
correspondence
between the
destination
signaling office
and the signaling
route.

ADD N7OFC

Creating a Signaling Link Set


Prerequisites

Context

Before the operation, it is required to confirm:

The adjacent office configuration is completed.

The data configuration of local office is completed.

The range of signaling link set is configured in the resource


management.

The MML Terminal window is opened.

Perform this procedure to configure a narrowband signaling link set


to the adjacent office, including 64k signaling link set, 2M signaling
link set, N64k signaling link set.
When configuring the signaling link set connected by TDM, you
may select N64, NN64, and N2M.

Steps

64k indicates that the narrow-band signaling link in this signaling link set only seizures one time slot on one E1 line, with
64 Kbps bandwidth.

N64K indicates that the narrow-band signaling link in this


signaling link set seizures N consecutive time slots on one E1
line (8n25).

2M indicates that the narrow-band signaling link in this signaling link set seizures all 31 time slots on one E1 line (time slot
0 is unavailable), with 1.984Mbps bandwidth.

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a signaling link set. The command is ADD N7LKS.

Confidential and Proprietary Information of ZTE CORPORATION

183

ZXWN MSCS Data Configuration Guide(MGCF)

Table 77 describes the main parameters in the ADD N7LKS


command.
TABLE 77 PARAMETERS IN THE ADD N7LKS COMMAND
Parameter
Name

OFCID

TYPE

ID

Parameter Description

Instruction

Direct-associated office
of the signaling link set

It is a mandatory
parameter. Type the
adjacent office ID of
this signaling link set,
which is specified in
the adjacent office
configuration.

Signaling link set type

This parameter indicates


the types of the signaling
links in this signaling link
set. Select N64 for a
64K signaling link, NN64
for an n64K signaling
link, and N2M for a 2M
signaling link.

Signaling link set ID

It is a mandatory
parameter. It designates
the signaling link set
No. for distinguishing
signaling link sets,
ranging from 1 to 1024.

Link error revision,


including:

LECM

BASIC (basic error


revision, transit delay
15 ms): all the signaling
links use this method for
relatively short transit
delay, except for satellite
links.
PCR (Preventive Cyclic
Retransmission: transit
delay15 ms): Satellite
links use this method for
it has a relatively long
transit delay.

NAME

Alias

This parameter
designates the error
correction method of the
signaling links in this
set. In general, select
BASIC. In general,
BASIC is selected when
the line transit delay
is less than 15ms, and
PCR is selected when
the line transit delay
is greater than 15ms.
For a 2M signaling link,
BASIC must be selected.
This parameter shall be
consistent with that of
the opposite end through
negotiation.
It is a mandatory
parameter describing
the name of this
signaling link set for
easy identification.

Example: Create a signaling link set connected TDM office 104


with the following requirements.

184

TDM office ID: 104

Signaling link set No.: 1

Group type: 64K narrowband link set

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

Link error revision: Basic error revision

Alias: TDM-1.

The specific command is as follows.


ADD N7LKS:OFCID=104,TYPE=N64,ID=1,LECM=BASIC,N
AME="TDM-1";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating an SPB-Accessed Signaling


Link
Prerequisites

Context

Before the operation, it is required to confirm:

The signaling link group configuration is completed.

The MML Terminal window is opened.

Signaling link is the physical channel carrying signaling messages.


The narrow-band signaling link used on the MGCF is an SPB-accessed signaling link.

Note:
In order to evenly distribute the traffic load to an office on each
link that is selected in the dynamic routing table corresponded
by the SLC, usually the number of links in a link set to a directassociated office is configured as 2n, namely, 2, 4, 8, or 16 links
are configured. Make sure that load onto each link is not too heavy
to cause it breakdown.
Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create an SPB-accessed signaling link. The command is ADD
N7LNKE1
Table 78 describes the main parameters in the ADD N7LNKE1
command.

Confidential and Proprietary Information of ZTE CORPORATION

185

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 78 PARAMETERS IN THE ADD N7LNKE1 COMMAND


Parameter
Name

LKSID

SLC

MODULE

NAME

Parameter
Description

Instruction

Signaling link
set ID

It is a mandatory parameter,
designating the signaling link
set No. of this signaling link.
It is associated with the ID of
the signaling link set that is
configured.

Signaling Link
Code (SLC)

This parameter designates the


SLC of this signaling link, ranging
from 0 to 15. It needs to
be consistent with the SLC of
the same signaling link of the
opposite-end office.

Signaling
management
module No.

It is a mandatory parameter.
Select a signaling module.
Several signaling links of the
same office should be configured
to different physical boards.
In addition, the signaling links
managed by each SMP module
should share load.

Alias

It is a mandatory parameter
designating the name of
the signaling link for easy
identification, with a length
ranging from 1 to 50 characters.

SPBUNT

SPB unit
number

CPU

CPU ID of SPB

E1

E1 number of
the SPB board

It is a mandatory parameter.
The CPU ID ranges from 1 to 4.
Several signaling links of the same
office should be configured to
different SPB boards. In addition,
the signaling links processed by
the CPUs on SPB board should
share load.

This parameter designates the


number of the E1 where the
signaling link is located, ranging
from 9 to 25. By default, it is
numbered from 9
64k signaling link: the time slot
number of the signaling link is 16

TS

Start timeslot
number of E1

N64k signaling link: its start


time slot ranges from 1 to 31
2M signaling link: Its start time
slot is 1

186

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction
Configure the number of the time
slots occupied by the signaling
link.

TSNUM

Quantity of
timeslots

64K signaling link: Its time slot


amount is 1.
N64K signaling link: Its time
slot amount is N.
2M signaling link: Its time slot
amount is 31.

Miscellaneous
information,
including:
E1: This
link uses
the E1-type
interface.

INFO

N64KT1:
This link uses
the T1-type
interface, with
64K normal
coding mode.
I64KT1: This
link uses
the T1-type
interface, with
64K reversal
phase coding
mode.

Configure the interface type and


coding mode of this link. In
general, it is an E1 link.

56KT1: This
link uses
the T1-type
interface, with
54K coding
mode.

Example: Create an SPB-accessed signaling link with the following requirements.

Signaling link set No.: 1

SMP module No.: 3

Signaling link alias: TDM-1

SPB board unit No.: 721

Start time slot number of E1: 1

Time slot amount: 1

Signaling link No.: 0

Other parameters: default.

The specific command is as follows.

Confidential and Proprietary Information of ZTE CORPORATION

187

ZXWN MSCS Data Configuration Guide(MGCF)

ADD N7LNKE1:LKSID=1,SLC=0,MODULE=3,NAME="TDM
-1",ID=1,SPBUNT=721,CPU=1,E1=9,TS=16,TSNUM=1,LO
OP=NO,INFO=E1,FCPLTHR=255;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating a Signaling Route


Prerequisites

Before the operation, it is required to confirm:

The signaling link group configuration is completed.

The range of signaling route ID is configured in the resource


management.

The MML Terminal window is opened.

Context

The signaling routing configuration is used for specifying the signaling link set to be selected and the method when the signaling
selects a route. The signaling route to a direct-associated office
only contains the signaling link sets to this office. The signaling
route to a quasi-associated office contains one or two signaling
link sets to the intermediate office.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a signaling route. The command is ADD N7ROUTE.
Table 79 describes the main parameters in the ADD N7ROUTE
command.
TABLE 79 PARAMETERS IN THE ADD N7ROUTE COMMAND
Parameter
Name

Parameter
Description

Instruction

NAME

Alias

It is a mandatory parameter
designating a signaling route
for easy identification.

Signaling link set 1

The signaling route contains


the first signaling link set.
Type the serial number of the
signaling link set 1.

Signaling link set 2

It is the second signaling


link set contained by the
signaling route. At least
either LKSID1 or LKSID2
is not equal to zero and
contains signaling links. If

LKSID1

LKSID2

188

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

Parameter
Name

Parameter
Description

Instruction
only one signaling link set
exists, type 0

Signaling route
number

This parameter designates


the serial number of the
signaling route, ranging from
1 to 2000. When there
is only one signaling link
set, this parameter may be
configured to be consistent
with the signaling link set
number.

LPM

Arrangement mode
of signaling link
sets. Refer to Table
80 for its options.

This parameter designates


the rules that should be
obeyed when the signaling
links of two signaling link
sets are sorted. When two
link sets have the same
signaling links, and the total
number is not more than
16, RAND (random order) is
recommended

LPMIN

Arrangement mode
in a signaling link
set. Refer to Table
80 for its options.

This parameter designates


the rules that should be
obeyed when the signaling
links in a signaling link set
are sorted. RAND (random
order) is recommended

MANUAL

Sort manually,
including NO(Need
Not Manual)
and YES(Need
Manual):

The parameter indicates


whether to manually sort the
signaling routes of the two
link groups

Link list

The maximum number


of instance is 16. The
format is <INDEX>-<LINK>,
representing the alignment
order and link number
respectively.

ID

LINKS

TABLE 80 ARRANGEMENT MODE OF SIGNALING SETS


Mode

Meanings

Instruction

RAND

Random
arrangement mode

Random arrangement mode

SLS0

Select On
SLS_BIT0

Selecting links between two


link sets according to Bit 0 of
SLS

SLS1

Select On
SLS_BIT1

Selecting links between two


link sets according to Bit 1 of
SLS

Confidential and Proprietary Information of ZTE CORPORATION

189

ZXWN MSCS Data Configuration Guide(MGCF)

Mode

Meanings

Instruction

SLS2

Select On
SLS_BIT2

Selecting links between two


link sets according to Bit 2 of
SLS

SLS3

Select On
SLS_BIT3

Selecting links between two


link sets according to Bit 3 of
SLS

SLS01

Select On
SLS_BIT0-1

Selecting links between two


link sets according to Bits 0
and 1 of SLS

SLS12

Select On
SLS_BIT1-2

Selecting links between two


link sets according to Bits 1
and 2 of SLS

SLS23

Select On
SLS_BIT2-3

Selecting links between two


link sets according to Bits 2
and 3 of SLS

Example: Create a signaling route with the following requirements.

Alias: TDM

Signaling link set No.: 1

Signaling route No.: 1

Other parameters: default.

The specific command is as follows.


ADD
N7ROUTE:NAME="TDM",LKSID1=1,LKSID2=0,ID
=1,LPM=RAND,LPMIN=RAND,MANUAL=NO;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating a Signaling Office


Prerequisites

Before the operation, it is required to confirm:

The signaling route configuration is completed.

The MML Terminal window is opened.

Context

Perform this procedure for configuring the correspondence between the destination signaling office and the signaling route.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;

190

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 6 MGCF-Other-Exchange Interconnection Data Configuration

2. Create a signaling office. The command is ADD N7OFC.


Table 81 describes the main parameters in the ADD N7OFC
command.
TABLE 81 PARAMETERS IN THE ADD N7OFC COMMAND
Parameter
Name

Parameter Description

Instruction

ID

Signaling route office

It is a mandatory
parameter. Type the
adjacent office No. of
the destination office

RT1

This parameter
designates the serial
number of the direct
route to the destination
adjacent office.

It is a mandatory
parameter. Configure
the serial number of the
direct route to this office,
ranging from 1 to 2000

RT2

Alternate route 1,
indicating the serial
number of the first
alternate route to the
destination adjacent
office.

RT3

Alternate route 2,
indicating the serial
number of the second
alternate route to the
destination adjacent
office. This parameter
is configured when only
the first alternate route
is already configured.

RT4

Alternate route 3,
indicating the serial
number of the third
alternate route to the
destination adjacent
office. This parameter is
configured when only the
second alternate route is
already configured.

NAME

Alias

This parameter ranges


from 0 to 2000.
Select up to three
available alternate
routes according to the
actual conditions. When
there is no alternate
route, configure it as 0.

It is a mandatory
parameter. This
parameter designates
the name of the
signaling office for
easy identification

Example: Create a signaling office to a TDM adjacent office


whose office ID is 104 and the direct-associated route number
is 1. The specific command is as follows.
ADD N7OFC:ID=104,RT1=1,RT2=0,RT3=0,RT4=0,NAME
="TDM";
END OF STEPS

Confidential and Proprietary Information of ZTE CORPORATION

191

ZXWN MSCS Data Configuration Guide(MGCF)

Result

192

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

Basic Service Data


Configuration
Table of Contents
Overview........................................................................ 193
Number Analysis Configuration .......................................... 193
Trunk Data Configuration .................................................. 235
Route Data Configuration.................................................. 258

Overview
The configuration flow of basic service data is as follows:
No.

Operations

Number analysis configuration

Trunk data configuration

Route data configuration

Number Analysis
Configuration
If the SIP address format is TEL/IP, the SIP number analysis is the
same with the ordinary number analysis.
If the SIP address format is URI, besides the ordinary number
analysis, a URI analysis configuration is required.
ZXWN MSCS system provides seven number analyzers: new service number analyzer, CENTREX number analyzer, private-network
number analyzer, special-service number analyzer, local-network
number analyzer, national toll-service number analyzer, and international toll-service number analyzer. For a specified DAS, numbers pass each type of analyzers specified by this DAS in a fixed
order. The analyzers strictly follow the following order to perform
number analysis, as shown in Figure 60.

Confidential and Proprietary Information of ZTE CORPORATION

193

ZXWN MSCS Data Configuration Guide(MGCF)

FIGURE 60 ANALYSIS ORDER OF NUMBER ANALYZERS

Configuration instances of common DASs and the number analysis


results are as follows:
1. DAS for pre-analyzing the called number
It is used to process special dial prefixes, including performing
call restriction, format conversion of the called number.
After an exchange receives 10193+called number dialed by
a subscriber, 10193 is deleted in this exchange, and the subsequent routing is based on the existing traffic routing, as shown
in Table 82.
TABLE 82 DAS FOR PRE-ANALYZING THE CALLED NUMBER
Analyzer
Entry

Analyzed Number

Analysis Result
If call restriction is
required, analyze it to
pre-analysis ending, and
call rejected

10193 + 0 + local area


code
New
service
number
analyzer

10193 + 0 + non-local
area code

If no call restriction is
required, analyze it to
pre-analysis normally
ending, and delete
10193 + 0 + local area
code from the change
index of the called
number
Analyze it to
pre-analysis normally
ending, and delete
10193 from the change
index of the called
number.
Whether to add 10193 to
the called-number index

194

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Analyzer
Entry

Analyzed Number

Analysis Result

10193 + G network
number section

10193 + C network
number section

in the CDR depends


on the CDR filling
requirements on the
billing center

2. Originating DAS: used to analyze the called number in the local-office-originated call, as shown in Table 83.
TABLE 83 ORIGINATING DAS
Analyzer
Entry

Analyzed Number

Analysis Result

New
service
number
analyzer

Charging query number

Analyze it to the SSP


charging query service

Free special-service
number

Analyze it to the
local-office free special
service, pointing to
the special-service
number configured on
the attendant console

Corresponding attendant
console number of the
special-service number

Analyze it to the
outgoing free special
service, pointing to the
special-service circuit
group

Short number

Special-service number
of the operator

Analyze it to the
outgoing free special
service, pointing to the
special-service circuit
group

Specialservice
number
analyzer

Vacant number
0
Localnetwork
number
analyzer
Local PSTN number

All numbers are analyzed


by the subsequent
analyzers
Analyze it to
the local-network
outgoing/local-call
service, pointing to
the gateway office

Confidential and Proprietary Information of ZTE CORPORATION

195

ZXWN MSCS Data Configuration Guide(MGCF)

Analyzer
Entry

Analyzed Number

Analysis Result

Local number section of


other mobile network

Analyze it to
the local-network
outgoing/local-call
service, pointing to
the gateway office

Non-local number section


of other mobile network

Analyze it to the
automatic service in
the national toll region,
pointing to the tandem
office of the local province

Number section of the


local mobile network

Analyze it to the MSC


common service
Vacant number

National
toll-service
number
analyzer

International
toll-service number
analyzer

All numbers are analyzed


by the subsequent
analyzers

0 + Local area code +


Local PSTN number

Analyze it to
the local-network
outgoing/local-call
service, pointing to
the gateway office

0 + Non-local area code

Analyze it to the
automatic service in
the national toll region,
pointing to the tandem
office of the local province

00 + International
number

Analyze it to the
international toll
automatic service

3. Forwarding DAS: used to analyze the number to which the call


is forwarded, as shown in Table 84.
TABLE 84 FORWARDING DAS
Analyzer Entry

Analyzed Number

Analysis Result
Vacant number

0
Local-network
number analyzer
Local PSTN number

196

Confidential and Proprietary Information of ZTE CORPORATION

All numbers are


analyzed by the
subsequent analyzers
Analyze it to
the local-network
outgoing/local-call
service, pointing to
the gateway office

Chapter 7 Basic Service Data Configuration

Analyzer Entry

Analyzed Number

Analysis Result

Local number section


of other mobile
network

Analyze it to
the local-network
outgoing/local-call
service, pointing to
the gateway office

Non-local number
section of other mobile
network

Analyze it to the
automatic service
in the national toll
region, pointing to the
tandem office of the
local province

Number section of the


local mobile network

Analyze it to the MSC


common service
Vacant number

National tollservice number


analyzer

All numbers are


analyzed by the
subsequent analyzers

0 + Local area code +


Local PSTN number

Analyze it to
the local-network
outgoing/local-call
service, pointing to
the gateway office

0 + Non-local area
code

Analyze it to the
automatic service
in the national toll
region, pointing to the
tandem office of the
local province

4. Roaming DAS: used to analyze the roaming number in the response message to the routing information query message, as
shown in Table 85. It is unnecessary to analysis the CC in national roaming numbers.
TABLE 85 ROAMING DAS
Analyzer Entry

Local-network
number analyzer

Analyzed Number

Analysis Result

Roaming number
section of the local
service area in the
local office

Analyze it to the local


MSC service
Analyze it to the
outgoing service of
the local MSC.

Roaming number
section of non-local
service area in the
local office

Note: The roaming


DAS is used when
there is no direct voice
channel between
MGWs (switched
through the T office) in
the region networking

Confidential and Proprietary Information of ZTE CORPORATION

197

ZXWN MSCS Data Configuration Guide(MGCF)

Analyzer Entry

Analyzed Number

Analysis Result

National other
roaming sections

Analyze it to the
national toll call

00 + International
number

Analyze it to the
international toll
automatic service

Overview
Description
Data Configuration

This section only introduces the basic steps of number analysis.


The related operations of the number analysis configuration are as
follows.
Steps

Operations

Commands

Creating a number analyzer


entrance

ADD ENTR

Creating a DAS

ADD DAS

Creating the default DAS


template of the local office

SET LDASTMPLT

Creating a DAS template


(optional)

ADD ACRTMPLT

Creating the called numbers


analysis

ADD TPDNAL

Creating Number Analysis Entrance


Prerequisites

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The number analysis entrance range is set in the resource management system.

The MML Terminal window is opened.

Context

Configuring number analysis entrance means specifying an ID for


each type of number analyzers.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a number analysis entrance by executing command A
DD ENTR.

198

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

The explanation of the main parameters in command ADD


ENTR is shown in Table 86.
TABLE 86 PARAMETERS IN THE ADD ENTR COMMAND
Parameter
Name

Parameter Description

Instruction

ID

Analyzer entry

It is an optional
parameter, which is
an integer, ranging from
1 to 1000

NAME

User alias

It is a mandatory
parameter, consisting of
0~50 characters

Analyzer entry type

It is an optional
parameter. Refer
to Table 87 for the
configuration description

TYPE

Number analysis result


under this analyzer,
including

NTYPE

VMSCIDX

CALLED (analysis
on called numbers)

CALLING (analysis
on calling numbers)

FORWARD
(analysis on calling
numbers during call
forwarding)

OPIMSI (analysis
on calling IMSI
numbers)

TPIMSI (analysis
on called IMSI
numbers)

FWDIMSI (analysis
on IMSI numbers
during call
forwarding)

RDCALLED
(Redirecting Number
Analysis)

Virtual MSC index

It is an optional
parameter, with CALLED
as the default value. In
general, select CALLED

It is an optional
parameter, which is
an integer, ranging
from 0 to 65535. Enter
it according to the
actual condition. The
default value is 0 (public
domain)

Confidential and Proprietary Information of ZTE CORPORATION

199

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 87 ANALYZER ENTRY TYPES


Parameter
Name

Parameter
Description

Configuration
Description

NEWSRV

New service number


analyzer

After this analyzer


is configured, if the
number is not matched
in this analyzer, it is
sent to the next entry
for analysis

CENTREX

CENTREX number
analyzer

This analyzer is not


configured

PRINET

Private-network
number analyzer

This analyzer is not


configured

SPECSRV

Special-service number
analyzer

After this analyzer


is configured, if the
number is not matched
in this analyzer, it is is
sent to the next entry
for analysis

LOCAL

Local-network number
analyzer

After this analyzer


is configured, if the
number is not matched
in this analyzer, the
analysis ends

NATIONAL

National toll-service
number analyzer

After this analyzer


is configured, if the
number is not matched
in this analyzer, the
analysis ends

INTER

International
toll-service number
analyzer

After the number


is analyzed in this
analyzer, the analysis
ends

Example: Create a number analysis entrance with the following


requirements.

Number analyzer entry ID: 1

User alias: Entr1

Number analyzer entry type: Local number analyzer

Analyzed number type: Called number.

The command is:


ADD ENTR:ID=1,NAME="Entr1",TYPE=LOCAL,NTYPE=CAL
LED;
END OF STEPS
Result

200

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Creating Number Analysis Selector


Prerequisites

Context

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The Nnumber analysis selector (DAS) range is set in the resource management system.

The number analyzer entry is configured.

The MML Terminal window is opened.

The DAS is the collection of various number analyzer entries, specifying the order and rule of performing number analysis.
Table 88 lists common DASs.
TABLE 88 COMMON DAS
Parameter
Name

Parameter Description

Configuration
Description

MS

MS originating

Used to analyze the called


number when an MS
originates a call

MSRN

Mobile station roaming


number

Used to analyze roaming


numbers or handover
numbers

CNG

Calling number analysis

Used for traffic division of


calling numbers

LI

Intercepted number

Used for the interception


function

PBRT

Personal Back Ring Tone

Used for the PBRT function

FWD

Forwarding number
analysis

Used to analyze the


third-party number to
which the call is forwarded

Number pre-analysis

Used for the number


pre-analysis function,
standardizing called
numbers, and performing
call restriction based on
numbers

PREDAS

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create number analysis selector by executing command ADD
DAS.
The explanation of the main parameters in command ADD DAS
is shown in Table 89.

Confidential and Proprietary Information of ZTE CORPORATION

201

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 89 PARAMETERS IN THE ADD DAS COMMAND

Parameter Name

Parameter
Description

Instruction

ID

DAS

It is a mandatory
parameter, which is
an integer, ranging
from 1 to 4096. It is
the index number of
the newly-added DAS

NAME

User alias

It is an optional
parameter, consisting
of 0~50 characters.

NEWSRV

New service number


analyzer entry

CENTR

CENTREX number
analyzer entry

PRINET

Private-network
number analyzer
entry

SPECSRV

Special-service
number analyzer
entry

LOCAL

Local-network
number analyzer
entry

NATIONAL

National toll-service
number analyzer
entry

INTER

International
toll-service number
analyzer entry

Enter the number


analyzer entry IDs
contained by a DAS

Example: Create a MS originating DAS with the following requirements.

DAS ID: 101

User alias: MSQH

Local number analyzer entry: 1

Other parameters: Adopt the default values.

The command is:


ADD
DAS:ID=101,NAME="MSQH",NEWSRV=0,CENTR
=0,PRINET=0,SPECSRV=0,LOCAL=1,NATIONAL=0,INTE
R=0;
END OF STEPS
Result

202

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Setting the Template of Number


Analysis Selector of the Current
Office
Prerequisites

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The DAS is configured.

The MML Terminal window is opened.

Context

Configuring the default DAS template of the local office means


configuring the DAS used for local-office service processing.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Setting the template of number analysis selector of the current
office by executing command SET LDASTMPLT.
The explanation of the main parameters in command SET
LDASTMPLT is shown in Table 90.
TABLE 90 PARAMETERS IN THE SET LDASTMPLT COMMAND
Parameter
Name

MS

MSRN

Parameter
Description

Instruction

MS-Originating
Selector

It is an optional parameter, which


is an integer, ranging from 0
to 4096. It is used to analyze
the called number when an MS
originates a call. If the called
party is a mobile subscriber,
the MSC needs to query the
routing information from the
corresponding HLR. If the called
party is a fixed subscriber, the
MSC connect the call to the
corresponding local exchange
or toll exchange according to
location of the called party

Roaming
Number
Selector

It is an optional parameter, which


is an integer, ranging from 0
to 4096. It is used to analyze
the MSRN returned from the
HLR, and judge whether the call
belongs to the local-office mobile
service or outgoing mobile service
based on this number. If the call
belongs to the local-office mobile
service, this number is sent to
the corresponding module for
processing. If the call belongs

Confidential and Proprietary Information of ZTE CORPORATION

203

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction
to the outgoing mobile service,
select the corresponding route
chain for call connection. In
addition, this DAS also analyzes
forwarding numbers returned
from the HLR, and subscriber
numbers from other mobile office
or fixed office

OR

Optimal
Routing
Number
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096.
When it is set that the local
office supports preferred routing
in the global variable control
system, configure this DAS for
international roaming call and the
forwarding service
It is an optional parameter, which
is an integer, ranging from 0 to
4096.

CNG

Calling Number
Selector

LI

Lawful
Interception
Number
Selector

IP

IP Call Selector

It is used to analyze the calling


number in outgoing calls to
implement traffic division of
the calling number and calling
number change function
It is an optional parameter, which
is an integer, ranging from 0 to
4096.
It is used for the interception
service
It is an optional parameter, which
is an integer, ranging from 0 to
4096.
It is used for the IP telephone
service

ICBCNG

It is an optional parameter, which


is an integer, ranging from 0 to
4096.
It is used for the incoming call
restriction service

Personal
Back Ring
Tone Number
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096.

FWD

Default Forward
Number
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

FWDCNG

Default Forward
Calling Number
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

PBRT

204

Incoming Call
Limit Calling
Number

It is used for the PBRT service

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter
Description

Instruction

ROUTCAT1

MS Category
1 Originating
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

ROUTCAT2

MS Category
2 Originating
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

ROUTCAT3

MS Category
3 Originating
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

ROUTCAT4

MS Category
4 Originating
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

ROUTCAT5

MS Category
5 Originating
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

IMSIOPDAS

Calling IMSI
Number
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

OVERLAY

Overlay
Number
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

SHLRSKEY

SHLR Service
Key Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

IMSITPDAS

Called IMSI
Number
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

IMSIFWDAS

Forward
IMSI Number
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

TESTCALLDAS

Test Call
Number
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

MBRT

Multimedia
Back Ring Tone
Number

It is an optional parameter, which


is an integer, ranging from 0 to
4096

INTPREDAS

International
Number
Pre-analysis

It is an optional parameter, which


is an integer, ranging from 0 to
4096

PREDAS

Originating
Number
Pre-Analysis
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
1000

RECNCTDAS

Default
Reconnection
Number
Selector

It is an optional parameter, which


is an integer, ranging from 0 to
4096

Confidential and Proprietary Information of ZTE CORPORATION

205

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

CAMELDNALIDX

CAMEL Caller
Number
Selector Index

It is an optional parameter, which


is an integer, ranging from 0 to
1000

SSDAS

Caller
Supplementary
Service Code
Selector Index

It is an optional parameter, which


is an integer, ranging from 0 to
1000

ASCODEDAS

ASCODE
Selector Index

It is an optional parameter, which


is an integer, ranging from 0 to
4096

Example: Configure the default DAS template of the local office


with the following requirements.

MS originating DAS: 101

MSRN DAS: 201

Forwarding DAS: 301.

The command is:


SET LDASTMPLT:MS=101,MSRN=201,FWD=301;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating Templet of Number Analysis


Selector (Optional)
Prerequisites

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The MML Terminal window is opened.

Context

It is required to configure multiple DAS templates in the dual-homing or regional networking.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create templet of number analysis selector by executing command ADD ACRTMPLT.
The explanation of the main parameters in command ADD
ACRTMPLT is shown in Table 91.

206

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

TABLE 91 PARAMETERS IN THE ADD ACRTMPLT COMMAND


Parameter
Name

Parameter Description

Instruction

TPLIDX

Analysis Selector
Templet Index

It is a mandatory
parameter, ranging
from 1~65535

NAME

User alias

It is a mandatory
parameter, consisting
of 1~50 characters

MS-Originating Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096. It is
used to analyze the
called number when an
MS originates a call.
If the called party is a
mobile subscriber, the
MSC needs to query
the routing information
from the corresponding
HLR. If the called party
is a fixed subscriber, the
MSC connect the call
to the corresponding
local exchange or toll
exchange according to
location of the called
party

Roaming Number
Selector

It is an optional
parameter, which is an
integer, ranging from
0 to 4096. It is used
to analyze the MSRN
returned from the HLR,
and judge whether
the call belongs to
the local-office mobile
service or outgoing
mobile service based
on this number. If
the call belongs
to the local-office
mobile service, this
number is sent to
the corresponding
module for processing.
If the call belongs
to the outgoing
mobile service, select
the corresponding
route chain for call
connection. In addition,
this DAS also analyzes
forwarding numbers
returned from the HLR,
and subscriber numbers
from other mobile office
or fixed office

MS

MSRN

Confidential and Proprietary Information of ZTE CORPORATION

207

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter Description

Instruction
It is an optional
parameter, which is
an integer, ranging
from 0 to 4096.

OR

Optimal Routing
Number Selector

When it is set that the


local office supports
preferred routing in the
global variable control
system, configure this
DAS for international
roaming call and the
forwarding service
It is an optional
parameter, which is
an integer, ranging
from 0 to 4096.

CNG

LI

Calling Number Selector

Lawful Interception
Number Selector

It is used to analyze
the calling number
in outgoing calls
to implement traffic
division of the calling
number and calling
number change
function
It is an optional
parameter, which is
an integer, ranging
from 0 to 4096.
It is used for the
interception service

IP

IP Call Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096.
It is used for the IP
telephone service

ICBCNG

PBRT

Incoming Call Limit


Calling Number

Personal Back Ring Tone


Number Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096.
It is used for the
incoming call restriction
service
It is an optional
parameter, which is
an integer, ranging
from 0 to 4096.
It is used for the PBRT
service

FWD

208

Default Forward
Number Selector

Confidential and Proprietary Information of ZTE CORPORATION

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter Description

Instruction

FWDCNG

Default Forward Calling


Number Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

ROUTCAT1

MS Category 1
Originating Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

ROUTCAT2

MS Category 2
Originating Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

ROUTCAT3

MS Category 3
Originating Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

ROUTCAT4

MS Category 4
Originating Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

ROUTCAT5

MS Category 5
Originating Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

IMSIOPDAS

Calling IMSI Number


Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

OVERLAY

Overlay Number
Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

SHLRSKEY

SHLR Service Key


Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

IMSITPDAS

Called IMSI Number


Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

IMSIFWDAS

Forward IMSI Number


Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

TESTCALLDAS

Test Call Number


Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

Confidential and Proprietary Information of ZTE CORPORATION

209

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter Description

Instruction

MBRT

Multimedia Back Ring


Tone Number

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

INTPREDAS

International Number
Pre-analysis

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

PREDAS

Originating Number
Pre-Analysis Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 1000

RECNCTDAS

Default Reconnection
Number Selector

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

CAMELDNALIDX

CAMEL Caller Number


Selector Index

It is an optional
parameter, which is
an integer, ranging
from 0 to 1000

SSDAS

Caller Supplementary
Service Code Selector
Index

It is an optional
parameter, which is
an integer, ranging
from 0 to 1000

ASCODE Selector Index

It is an optional
parameter, which is
an integer, ranging
from 0 to 4096

ASCODEDAS

Example: Create a DAS template with the following requirements.

DAS template ID: 1

User alias: VMSC1

MS originating DAS: 101

MSRN DAS: 201

Preferred routing DAS: 301

Calling number DAS: 401

Other parameters: Adopt the default values.

The command is:


ADD
ACRTMPLT:TPLIDX=1,NAME="VMSC1",MS=101,M
SRN=201,OR=301,CNG=401,LI=0,IP=0,CBCNG=0,PBRT
=0,CFU=0,CFUCNG=0,CFNDUB=0,CFNDUBCNG=0,CFUD
UB=0,CFUDUBCNG=0,CFNRC_E=0,CFNRCCNG_E=0,CF
NRC_L=0,CFNRCCNG_L=0,CFNRY=0,CFNRYCNG=0,CD
=0,CDCNG=0,FWD=0,FWDCNG=0,CNGVIGW=0,FWDVI
GW=0,INTRA=0,ROUTCAT1=0,ROUTCAT2=0,ROUTCAT3
=0,ROUTCAT4=0,ROUTCAT5=0,IMSIOPDAS=0,OVERLA
Y=0,LIIGW=0,SHLRSKEY=0,IMSITPDAS=0,IMSIFWDAS

210

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

=0,MBRT=0,INTPREDAS=0,PREDAS=0,CFPRE=0,CFUPR
E=0,NDUBPRE=0,UDUBPRE=0,CFNRCE_PRE=0,CFNRCL_
PRE=0,CFNRYPRE=0,CDPRE=0,MORCPRE=0,GMSCRCPR
E=0,CFRCPRE=0,MTRCPRE=0,RECNCTDAS=0,CAMELDN
ALIDX=0,SSDAS=0,ASCODEDAS=0;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating Called Number Analysis


Prerequisites

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The number analyzer entry is configured.

The MML Terminal window is opened.

Context

This section introduces how to configure number analysis for prefixes of called numbers and roaming numbers. The called number
analysis determines the subsequent service procedures of the call.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create the called number analysis by executing command ADD
TPDNAL.
The explanation of the main parameters in command ADD
TPDNAL is shown in Table 92.
TABLE 92 PARAMETERS IN THE ADD TPDNAL COMMAND
Parameter
Name

ENTR

DIGIT

Parameter
Description

Instruction

Number
analyzer entry

It is a mandatory parameter, which


is an integer, ranging from 1 to
1000. Select the corresponding
analyzer entry of the analyzed
number prefix. For local calls,
select the corresponding analyzer
entry of the local number analyzer

Analyzer
number

It is a mandatory parameter,
consisting of 1~20 digits. Input
the prefix of the called number,
whose length must make it be
distinguished in the local office.
For intra-office calls, it is required
to configure both the prefix of
the called number and that of the
local-office roaming number

Confidential and Proprietary Information of ZTE CORPORATION

211

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction
It is an optional parameter,
consisting of 0~50 characters.

NAME

SPECRST

SPECIDX

212

User alias

It is used to specifically describe


the called number analysis to
make it easily recognized

Special analysis
result rule

It is used to specify the index


number of the special analysis
result rule for the associated called
number. This parameter must
be defined by command ADD
CEDSPECRL at first. Then it can
be indexed here. This parameter
is configured to implement the
routing service based on number
length. When the system performs
analysis on the called number,
it automatically matches the
actual length of the called number
to see whether the length is
within the range of Special
analysis result rule for called
numbers. If the length is within
the range, the system adopts the
routing information in Special
analysis result of called numbers.
Otherwise, the system adopts the
routing information in the called
number analysis

Special analysis
result index

It is used to specify the index


number of the special analysis
result of the associated called
number. This parameter must
be defined by command ADD
SPECRST at first. Then it can
be indexed here. This parameter
is configured to implement the
routing service based on number
length. When the system performs
analysis on the called number,
it automatically matches the
actual length of the called number
to see whether the length is
within the range of Special
analysis result rule for called
numbers. If the length is within
the range, the system adopts the
routing information in Special
analysis result of called numbers.
Otherwise, the system adopts the
routing information in the called
number analysis

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter
Description

Call service
types, including
the options in

CAT

Instruction
It is an optional parameter. It is
used to specify the service type
triggered by this number, and
determine the direction of this
call. The system adopts vacant
number by default.
The called number of the
local office is analyzed to LOL
(Outgoing/local service of the local
network).
When the call service type is
vacant number, local-network
local-office/common service, MSC
local-network local-office service,
Mobile Number Portability (MNP),
or H323 call, number analysis
result 1 must be fixed to 0. When
the call service type is outgoing
call or toll call, number analysis
result 1 is used to specify the
index number of the outgoing
route chain.
When the call service type is
equal access: CIC of the operator
where the subscriber is located or
equal access: non-local-network
CIC, number analysis result 1 is
used to specify the index number
of the outgoing route chain.

RST1

Number
analysis result
1

When the call service type


is OVERLAY prefix incoming
service, number analysis result
1 is used to specify the index
number of the outgoing route
chain. When the call service
type is OVERLAY: CAMEL service
triggered by MO, or OVERLAY:
CAMEL service triggered by MT,
number analysis result 1 is used
to specify the index number of the
outgoing route chain.
When the call service type is IP
service, IP mobile service, or
independent IP service number
analysis result 1 is used to specify
the index number of the outgoing
route chain.
When the call service type is MNP
outgoing routing number analysis
result 1 is used to specify the
index number of the outgoing
route chain.
When the call service type is
Outgoing paid special service or
Outgoing free special service,
number analysis result 1 is used
to specify the index number of the
outgoing route chain.

Confidential and Proprietary Information of ZTE CORPORATION

213

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction
The above-specified index number
of the outgoing route chain must
be defined by command ADD
CHAIN at first. Then it can be
indexed here.
When the call service type
is Mobile emergency special
service, Local-office paid special
service or Local-office free
special service, number analysis
result 1 is used to specify the
special-service number. This
parameter must be defined by
command ADD SSPN at first.
Then it can be indexed here.
When the call service type is Tone
play service, CAT_SEND_TONE,
number analysis result 1 is used
to specify the ID of the tone to be
played

RST2

Number
analysis result
2

It is used to specify the index


number of CAMEL access
subscription information of
the calling subscriber. This
parameter must be defined by
command ADD CAINFO at first.
Then it can be indexed here. When
the call service type is equal
access: CIC of the operator where
the subscriber is located or equal
access: non-local-network CIC,
this parameter must be configured.
When the call service type
is OVERLAY: CAMEL service
triggered by MO, or OVERLAY:
CAMEL service triggered by MT,
this parameter must be configured.
When the call service type is other
types except the above-listed,
number analysis result 2 must be
fixed to 0

RST3

214

Number
analysis result
3

It is used to specify the index


number of CAMEL access
subscription information of the
called subscriber. This parameter
must be defined by command ADD
CAINFO at first. Then it can be
indexed here.
When the call service type
is OVERLAY: CAMEL service
triggered by MO, or OVERLAY:
CAMEL service triggered by MT,
this parameter must be configured.
When the call service type is other
types except the above-listed,
number analysis result 3 must be
fixed to 0

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

CHAINAL

RNLEN

Parameter
Description

Instruction

Route chanin
analysis index

It is used to specify the analysis


index number of the route chain.
This parameter must be defined
by command ADD CHAINAL at
first. Then it can be indexed. This
parameter takes effect only when
the call service type is outgoing
service (including various outgoing
services). It priority is higher than
that of the outgoing route chain
referred to in number analysis
result 1. Route chain analysis is
an intelligent routing policy better
than the policy of specifying a
single route chain

Length of the
carried routing
number

When the call service type is MNP


outgoing routing, it is configured
to the length of the carried routing
number. When the call service
type is other types except the
above-listed, it must be fixed to 0
It is an optional parameter, which
is an integer ranging from 0 to
255, with a default of 3. It is
used to specify the minimum digit
length of the analyzed number
required for call connection.

MINLEN

Minimum digit
length of
numbers

During an incoming call, if the


received digits are shorter than
this length, the system waits
for the subsequent digits. If the
system judges that there is no
subsequent digit, and the received
digits are shorter than this length,
the system considers that the
number format is wrong, and
releases the call.
During a local-office-originated
call, if the received digits are
shorter than this length, the
system considers that the number
format is wrong, and releases the
call.
For the OVERLAY prefix incoming
service, the system gets the length
of the OVERLAY prefix according
to the minimum digit length of
numbers. Therefore, it is required
to configure the minimum digit
length of numbers to the length of
the OVERLAY prefix. Otherwise,
procedures cannot be correctly
processed

Confidential and Proprietary Information of ZTE CORPORATION

215

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction
It is an optional parameter, which
is an integer ranging from 0 to
255, with a default of 20. It is
used to specify the maximum digit
length of the analyzed number
required for call connection.

MAXLEN

Maximum
digit length of
numbers

During an incoming call, it is


the basis of whether to wait
for subsequent digits. If the
received digits reach this length,
the system does not wait for
subsequent digits.
During a local-office-originated
call, if the received digits are
longer than this length, the system
determines whether to continue or
release the call according to flag
No call when the called number
exceeds the length in the option
enabling configuration. If the
system determines to continue the
call, it cuts the exceeding digits

OVERLAY
priority,
including:

OVLYPRI

NO (No
priority):
Trigger the
intelligent
service based
on CSI at
first, and
then trigger
the intelligent
service again
based on
OVERLAY
HCSI (Higher
than the CSI
in priority):
Trigger the
intelligent
service based
on OVERLAY
at first, and
then trigger
the intelligent
service again
based on CSI

216

It is used to the priority relationship


between triggering the intelligent
service based on CSI and triggering
the intelligent service based on
OVERLAY. The system adopts no
priority by default. When the call
service type is OVERLAY: CAMEL
service triggered by MO, this
parameter is effective. Otherwise,
this parameter is ineffective

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter
Description

Instruction

Voice channel
release mode,
including:
CING (calling
control
release):
The calling
party controls
whether to
release the
call. In this
mode, when
only the called
party hooks on,
the call still can
continue.

REL

CED (called
control
release):
The called
party controls
whether to
release the call.
In this mode,
when only the
calling party
hooks on, the
call still can
continue.

It is an optional parameter. It
indicates a resource release mode
when subscribers hook on. In
general, select NO. Select CED for
such special numbers as 110 and
119

NO (noncontrol
release): Both
the calling
party and the
called party
can control
whether to
release the call.
In this mode,
no matter
whether the
calling party or
the called party
hooks on, the
call is released

NET

Type of the
destination
network

It is an optional parameter, with


a default of 1. For calls to other
office in the local network, select
the signaling network where the
destination office is located. For
intra-office calls, this option is
meaningless.

Confidential and Proprietary Information of ZTE CORPORATION

217

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

Number
address
attribute,
including:
DEF (default
attribute): Do
not replace
the address
attribute of
the analyzed
number.
INT
(international
number):
Replace the
address
attribute of
the analyzed
number with
international
number.
NAT

NAT (national
number):
Replace the
address
attribute of
the analyzed
number with
national (valid)
number. LOC
(local number):
Replace the
address
attribute of
the analyzed
number with
local number.

It is an optional parameter. It
is used to replace the address
attribute of the analyzed number.
In general, it is set to DEF, or is
set according to the requirements
of the peer end

UNK (attribute
unknown):
Replace the
address
attribute of
the analyzed
number with
unknown
Transforming
the calling
number again,
including:

OPDDICONT

NO (Not
allowed): It is
not allowed to
transform the
calling number
again in the
subsequent call
procedures.

It is an optional parameter. It
is used to specify whether it is
allowed to transform the calling
number again in the subsequent
call procedures when the calling
number was already transformed
once. The system adopts NO by
default

YES (allowed):
It is allowed to
transform the

218

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter
Description

Instruction

calling number
again in the
subsequent call
procedures.
Transforming
the called
number again,
including:

TPDDICONT

NO (Not
allowed): It is
not allowed to
transform the
called number
again in the
subsequent call
procedures.
YES (allowed):
It is allowed to
transform the
called number
again in the
subsequent call
procedures

OPDDI

TPDDI

OPDLYDDI

It is an optional parameter. It
is used to specify whether it is
allowed to transform the called
number again in the subsequent
call procedures when the called
number was already transformed
once. The system adopts NO by
default

Calling-number
immediate
transform
index

It is an optional parameter. It
is the number stream transform
index of the calling-number
immediate transform. Immediate
transform immediately makes the
calling number transformed. This
parameter must be defined by
command ADD DDI at first. Then
it can be indexed here

Called-number
immediate
transform
index

It is an optional parameter. It
is the number stream transform
index of the called-number
immediate transform. Immediate
transform immediately makes the
called number transformed. This
parameter must be defined by
command ADD DDI at first. Then
it can be indexed here

Calling-number
delay transform
index

It is an optional parameter. It
is the number stream transform
index of the calling-number delay
transform. Delay transform takes
effects in the IAM message at the
outgoing side instead of making
the calling number transformed
immediately. This parameter must
be defined by command ADD DDI
at first. Then it can be indexed
here.
According to the IAM message at
the outgoing side, perform the
calling-number delay transform
here, and then perform the

Confidential and Proprietary Information of ZTE CORPORATION

219

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction
calling-number delay transform in
the number pre-analysis

TPDLYDDI

DDIOVERB

Called-number
delay transform
index

It is an optional parameter. It
is the number stream transform
index of the called-number
immediate transform. Immediate
transform immediately makes the
called number transformed. This
parameter must be defined by
command ADD DDI at first. Then
it can be indexed here

B-interface
number
transform
index

It is the number stream transform


index of the called number in the
outgoing call request message
between the MSC and the VLR. The
transform purpose is to facilitate
the VLR judging the toll call
authority. This parameter must be
defined by command ADD DDI at
first. Then it can be indexed here

Whether to
support the
interworking
between video
calls, including:

IWVEDIO

LSUP:
Local-network
subscribers
support the
interworking
between
video calls by
default). The
call continues.
OSUP:
Subscribers in
other networks
support the
interworking
between video
calls). The call
continues.

It is an optional parameter. It is
used to specify whether to support
the interworking between video
calls. The default value is LSUP

ONSUP:
Subscribers
in other
networks do
not support the
interworking

TIMELMT

220

Maximum
call duration
(minute)

It is used to specify the maximum


call duration allowed for a call.
When the duration of a call reaches
the maximum call duration, the
system automatically release the
call. If it is unnecessary to restrict
the maximum call duration, adopt
the default value of 0

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter
Description

Instruction

AUXDAS

Assistant DAS

It is an optional parameter. It
is used to specify the DAS for
analyzing the called number again
when the call service type is
outgoing service, and when the
connection between the local office
and the mutually-backed-up office
is broken in the mutual backup
dual-homing networking. This
parameter must be defined by
command ADD DAS at first. Then
it can be indexed here

A6

Sending A6
signal after
receiving
how many
digits during
incoming calls

It is used to specify the number


of digits that the system receives
enough to send A6 signal to the
front office. This parameter only
takes effect during incoming
calls using Channel Associated
Signaling (CAS)

Toll prefix +
Area code
length

It is an optional parameter, which


is an integer, ranging from 0
to 15. When the call service
type is national/international toll
service, this parameter needs to
be configured

Enabled
options Refer
to Table 94 for
details

It is an optional parameter.
In general, select CCS7
(Automatically sending the
calling number when using CCS7
for outgoing services) and (No call
when the called number exceeds
the maximum digit length)

Fax analysis
resutl index

It is used to specify the bearer


analysis result index number of
the called number associated with
the fax service. This parameter
must be defined by command ADD
BEARRST at first. Then it can be
indexed here. This parameter
is configured to implement the
routing service based on the bearer
capability. For the fax service,
if the associated bearer analysis
result index of the called number
is configured, the call adopts the
associated bearer analysis result
of the called number, thus flexible
routing is implemented

PFXLEN

ENOPT

FAXIDX

Confidential and Proprietary Information of ZTE CORPORATION

221

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

AVIDX

DVIDX

ADATAIDX

222

Parameter
Description

Instruction

Analog video
analysis result
index

It is used to specify the bearer


analysis result index number of
the called number associated
with the analog video service.
This parameter must be defined
by command ADD BEARRST at
first. Then it can be indexed here.
This parameter is configured to
implement the routing service
based on the bearer capability.
For the analog video service, if
the associated bearer analysis
result index of the called number
is configured, the call adopts the
associated bearer analysis result
of the called number, thus flexible
routing is implemented

Digital video
analysis result
index

It is used to specify the bearer


analysis result index number of
the called number associated
with the digital video service.
This parameter must be defined
by command ADD BEARRST at
first. Then it can be indexed here.
This parameter is configured to
implement the routing service
based on the bearer capability.
For the digital video service, if
the associated bearer analysis
result index of the called number
is configured, the call adopts the
associated bearer analysis result
of the called number, thus flexible
routing is implemented

Analog data
analysis result
index

It is used to specify the bearer


analysis result index number of
the called number associated with
the analog data service. This
parameter must be defined by
command ADD BEARRST at first.
Then it can be indexed here.
This parameter is configured to
implement the routing service
based on the bearer capability.
For the analog data service, if
the associated bearer analysis
result index of the called number
is configured, the call adopts the
associated bearer analysis result
of the called number, thus flexible
routing is implemented

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

DDATAIDX

Parameter
Description

Instruction

Digital data
analysis result
index

It is used to specify the bearer


analysis result index number of
the called number associated
with the digital data service. This
parameter must be defined by
command ADD BEARRST at first.
Then it can be indexed here.
This parameter is configured to
implement the routing service
based on the bearer capability.
For the digital data service, if the
associated bearer analysis result
index of the called number is
configured, the call adopts the
associated bearer analysis result
of the called number, thus flexible
routing is implemented

Whether to play
the DDC tone,
including:

DDCPLAY

NONE (Not
playing the
DDC tone): It
is not required
to play the DDC
tone in the local
office.
PLAY (Playing
the DDC tone):
It is required
to play the DDC
tone in the local
office.

It is used to specify whether


to play the DDC tone in the
local office. The system adopts
NONE by default. The purpose
of configuring whether to play
the DDC tone in the number
analysis configuration is to avoid
no tone play or repeated tone play
caused by inconsistent tone play
configuration during inter-office
DDC calls

Voice Activity
Detection
(VAD) flag,
including:
CLOSE: Not
starting the
VAD function.
OPEN: Starting the VAD
function.INVALID: The VAD
function is invalid

VAD

OPPMGWID

Opposite-end
MGW ID

It is used to specify whether to


start the VAD function. The system
adopts INVALIDby default

It is used to specify between which


opposite-end MGW and the local
MGW the TDM backup route is
adopted. The QOSs between the
local MGW and all opposite-end
MGWs can be found through
automatic test calls. When the
QOS difference between the
opposite-end MGW and the local
MGW is specified, the call adopts
the TDM backup route

Confidential and Proprietary Information of ZTE CORPORATION

223

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

Call type
priority,
including:
INVALID: The
call priority is
invalid.
HIGHEST: The
call has the
highest priority.

CALLSERVPRILVL

HIGHER: The
call has a
priority one
level lower than
the highest
priority.
NORMAL:
The call has
a priority one
level lower
than the higher
priority.

It is used to specify the call


priority. The system adopts
INVALID by default. The call
priority has two functions. In
one case, in the softswitch office
in the toll softswitch network,
the voice coding format can be
dynamically selected according to
the call priority and the load on
the IP bearer network. In another
case, based on the combined
information of office ID and
priority configured in the number
analysis configuration, the final
priority of a call is got to perform
load control

LOW: The call


has the lowest
priority

RERTS

Re-routing
route chain

It is used to specify the re-routing


route chain ID. This parameter
must be defined by command
ADD RERTS at first. Then it
can be indexed here. When flag
RRTO in enabled options takes
effect, the re-routing route chain
takes effect too. For an outgoing
call procedure, if the call fails,
and the corresponding failure
cause is configured with Enabling
rerouting for failure in the R_ICP
configuration, re-select the route
from this route chain according
to the re-routing route chain.
For an incoming call using ISUP,
TUP, or BICC signaling, when
the call procedure is an outgoing
procedure, and the call fails before
the IAM message is sent, the
re-routing route chain serves as
the standby route, and is not
controlled by RRTO.
If route chain analysis is
configured, the re-routing
route chain here is invalid. In this
case, use the re-routing route
chain configured in the route chain
analysis

224

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter
Description

Inter-MGW
route chain or
not, including:

INCHAIN

NO: The
outgoing route
chain got
from number
analysis is not
an inter-MGW
route chain.
YES: The
outgoing route
chain got
from number
analysis is
an inter-MGW
route chain

Instruction
It is used to specify whether the
outgoing route chain got from
number analysis is an inter-MGW
route chain. The system select
NO by default. If YES is selected,
the routes in the outgoing route
chains will not be selected for
the outgoing route. The outgoing
route will be got after perform
number analysis again according
to the associated called number
DAS configured in the outgoing
route chain.
This parameter is used in the
following cases:
One virtual outgoing route chain
is got based on number analysis
at first, and then the real outgoing
route is got based on the called
number DAS associated with the
virtual outgoing route chain.
When one MSCS controls multiple
areas, the outgoing route chain
facilitates subscriber management

RECMDMGWNODEID

Recommended
MGW nodes

It is used to specify the set of


recommended MGWs for outgoing
service. In the case of multiple IP
domains, if one MSCS manages
multiple MGWs, and these MGWs
belong to different IP domains,
the set of recommended MGWs
for outgoing service needs to be
configured. The MGW set here
should be a sub-set of the MGW
set supported by outgoing service.
This parameter must be defined
by command ADD TOPO at first.
Then it can be indexed here

TABLE 93 CALL SERVICE TYPES


Call
Service
Types

Meanings

Description

NULL

Vacant number

Indicates that the subsequent call


procedures are processed based
on the procedure of processing
vacant numbers

LLC

Localnetwork localoffice/common
service

Indicates that the subsequent call


procedures are processed based
on the local service procedure

Confidential and Proprietary Information of ZTE CORPORATION

225

ZXWN MSCS Data Configuration Guide(MGCF)

Call
Service
Types

Meanings

Description

LOL

Local-network
outgoing/localcall service

Indicates that the subsequent


call procedures are processed
based on the local-call service
procedure. The mobile-to-fixed
local outgoing call service is
usually analyzed to this type

LORU

Local-network
outgoing/rural
(network) call
service

Indicates that the subsequent


call procedures are processed
based on the local rural (network)
outgoing call service procedure.
The mobile-to-fixed rural outgoing
call service is usually analyzed to
this type

DWTM

Domestic toll
(intra-region)
manual service

Indicates that the subsequent call


procedures are processed based
on the domestic toll (intra-region)
manual service procedure. In
general, it is not recommended to
configure this service type

DWTA

Domestic toll
(intra-region)
automatic
service

Indicates that the subsequent call


procedures are processed based
on the domestic toll (intra-region)
automatic service procedure. In
general, it is not recommended to
configure this service type

DBTM

Domestic toll
(inter-region)
manual service

Indicates that the subsequent call


procedures are processed based
on the domestic toll (inter-region)
manual service procedure. In
general, it is not recommended to
configure this service type

DBTA

Domestic toll
(inter-region)
automatic
service

Indicates that the subsequent call


procedures are processed based
on the domestic toll (inter-region)
automatic service procedure. The
domestic toll call service is usually
analyzed to this type

INTM

International
toll manual
service

Indicates that the subsequent call


procedures are processed based
on the international toll manual
service procedure. In general, it
is not recommended to configure
this service type

International
toll automatic
service

Indicates that the subsequent


call procedures are processed
based on the international toll
automatic service procedure. The
international toll call service is
usually analyzed to this type

INTA

226

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Call
Service
Types

Meanings

Description

Local-office paid
special service

Indicates that the subsequent


call procedures are processed
based on the local-office paid
special service procedure. The
local-office paid special service is
usually analyzed to this type

Local-office free
special service

Indicates that the subsequent


call procedures are processed
based on the local-office free
special service procedure. The
local-office free special service is
usually analyzed to this type

Outgoing paid
special service

Indicates that the subsequent call


procedures are processed based
on the outgoing paid special
service procedure. The outgoing
paid special service is usually
analyzed to this type

Outgoing free
special service

Indicates that the subsequent


call procedures are processed
based on the outgoing free special
service procedure. The outgoing
free special service is usually
analyzed to this type

DEPS

Additional
service

Indicates that the subsequent


call procedures are processed
based on the additional service
procedure. In general, it is not
recommended to configure this
service type

CENTL

Intra-office
call within
the CENTREX
business group

Indicates that the subsequent call


procedures are processed based
on the intra-office call procedure
within the CENTREX business
group.

CENTO

Outgoing call
within the
CENTREX
business group

Indicates that the subsequent call


procedures are processed based
on the outgoing call procedure
within the CENTREX business
group

TELCA

Intelligent
Ntwork service
call

Indicates that the subsequent call


procedures are processed based
on the intelligent network service
call procedure

EQACL

Equal access:
CIC of the
operator where
the subscriber is
located

Indicates that the subsequent


call procedures are processed
based on the procedure of Equal
access: CIC of the operator where
the subscriber is located

LSPA

LSFR

OUPA

OUFR

Confidential and Proprietary Information of ZTE CORPORATION

227

ZXWN MSCS Data Configuration Guide(MGCF)

Call
Service
Types

Meanings

Description

EQACO

Equal access:
non-localnetwork CIC

Indicates that the subsequent


call procedures are processed
based on the procedure of Equal
access: non-local-network CIC

Tone play service, CAT_SEND_TONE

Indicates that the subsequent


call procedures are processed
based on the tone play service
procedure. After calling the
number that is analyzed to this
type, the system will directly play
the tone according to the tone
ID configured in number analysis
result 1

Toll DDC
incoming call

Indicates that the subsequent


call procedures are processed
based on the toll DDC incoming
call service procedure. The toll
incoming DDC call that needs to
be routed in the local office is
analyzed to this type

Local DDC call

Indicates that the subsequent call


procedures are processed based
on the local DDC call service
procedure. The local DDC call
(dialing the MSISDN number) that
needs to be routed in the local
office is analyzed to this type

Toll DDC
outgoing call

Indicates that the subsequent


call procedures are processed
based on the toll DDC outgoing
call service procedure. The toll
outgoing DDC call is analyzed to
this type

Local DDC
outgoing call

Indicates that the subsequent


call procedures are processed
based on the local DDC outgoing
call service procedure. The local
outgoing DDC call is analyzed to
this type

MSCO

MSC common
service

Indicates that the subsequent call


procedures are processed based
on the MSC common service
procedure. The call (dialing the
MSISDN number) that needs to
be routed in the local office is
analyzed to this type

MSLL

MSC localnetwork
local-office
service (only
for roaming
numbers)

Indicates that the subsequent


call procedures are processed
based on the MSC local-network
local-office service procedure. It
is used to analyze the roaming
numbers and handover numbers
of the local office

STONE

DDCI

DDCC

DDCO

DDCCO

228

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Call
Service
Types

Meanings

Description

MSLO

MSC local
outgoing
service (only
for roaming
numbers)

Indicates that the subsequent call


procedures are processed based
on the local outgoing service
procedure. The local outgoing call
of roaming numbers is analyzed
to this type

CINRE

Calling-number
incoming call
restriction

Indicates that the subsequent call


procedures are processed based
on the calling-number incoming
call restriction procedure

MSLTE

MSC national
toll call (only
for roaming
numbers)

Indicates that the subsequent


call procedures are processed
based on the MSC national toll
call service procedure. The toll
outgoing call of roaming numbers
is analyzed to this type

AAC

Automatic
response
number

Indicates that the subsequent


call procedures are processed
based on the automatic response
number service procedure

OVERLAY
prefix incoming
service

Indicates that the subsequent call


procedures are processed based
on the OVERLAY prefix incoming
service procedure. The OVERLAY
prefix incoming call is analyzed to
this type

OVCS

OVERLAY call
service

Indicates that the subsequent call


procedures are processed based
on the OVERLAY call service
procedure. It is used for the IGW
system

MSITE

MSC
international
toll call (only
for roaming
numbers)

Indicates that the subsequent


call procedures are processed
based on the MSC international
toll call service procedure. The
international toll outgoing call is
analyzed to this type

IP

IP fixed service

Indicates that the subsequent call


procedures are processed based
on the IP fixed service procedure.
It is used for the IGW system

SSP

SSP charging
and querying
service

Indicates that the subsequent call


procedures are processed based
on the SSP charging and querying
service procedure.

NSSP

Non-SSP
charging and
querying service

Reserved

OVPRE

Confidential and Proprietary Information of ZTE CORPORATION

229

ZXWN MSCS Data Configuration Guide(MGCF)

Call
Service
Types

230

Meanings

Description

IPMO

IP mobile
service

Indicates that the subsequent


call procedures are processed
based on the IP mobile service
procedure. The IP service in the
mobile system is analyzed to this
type

INSIP

IP service dialed
by intelligentnetwork
subscribers

Reserved

ALIP

Independent IP
service

Indicates that the subsequent call


procedures are processed based
on the independent IP service
procedure. The independent IP
incoming call is analyzed to this
type

OVMO

OVERLAY:
MO-triggered
CAMEL service

Indicates that the subsequent call


procedures are processed based
on the OVERLAY: MO-triggered
CAMEL service procedure

OVMT

OVERLAY:
MT-triggered
CAMEL service

Indicates that the subsequent call


procedures are processed based
on the OVERLAY: MT-triggered
CAMEL service procedure

MNP

Mobile number
portability

Indicates that the subsequent call


procedures are processed based
on the MNP service procedure

MNPR

MNP MNP
outgoing routing

Indicates that the subsequent call


procedures are processed based
on the MNP outgoing routing
service procedure

SIPO

SIP outgoing
call

Indicates that the subsequent call


procedures are processed based
on the SIP outgoing call service
procedure

H323

H323 call

Indicates that the subsequent


call procedures are processed
based on the H323 call service
procedure.

MOIMC

Mobile
emergency
special service

Indicates that the subsequent call


procedures are processed based
on the mobile emergency special
service procedure

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Call
Service
Types

Meanings

Description

SSSP

Independent
SSP outgoing
service

Indicates that the subsequent


call procedures are processed
based on the independent SSP
outgoing service procedure. The
SSSP (Independent SSP outgoing
service) in the analysis result of
the called number is used for the
IGW system

IGWA

IGW
supplementary
service (only for
IGW)

Indicates that the subsequent


call procedures are processed
based on the IGW supplementary
service procedure

DASA

DAS service
(virtual IGW)
(only for IGW)

A new DAS is got through number


analysis, which is used for the
subsequent analysis of the called
number

OCIC

Local valid CIC


service

Indicates that the subsequent call


procedures are processed based
on the local valid CIC service
procedure. This parameter is
reserved

OUPAOD

Outgoing
paid special
service (can
be dialed by
the defaulting
subscribers)

Indicates that the subsequent call


procedures are processed based
on the outgoing paid special
service (can be dialed by the
defaulting subscribers) procedure

LINTS

Local-office
intelligent
service

Indicates that the subsequent call


procedures are processed based
on the local-office intelligent
service procedure. It is used for
the IGW system

SHLRQ

SHLR querying
service (only for
IGW)

Indicates that the subsequent call


procedures are processed based
on the SHLR querying service
procedure

IGWC

IGW common
service (only for
IGW)

Indicates that the subsequent


call procedures are processed
based on the IGW common
service procedure. The call to
PHS subscribers, which needs to
be routed in the local office, is
analyzed to this type

ISSPQ

IGWSSP
charging and
querying service
(only for IGW)

Indicates that the subsequent call


procedures are processed based
on the IGW SSP charging and
querying service procedure

IGWLF

IGW local-office
free special
service

Indicates that the subsequent


call procedures are processed
based on the IGW local-office free
special service procedure

Confidential and Proprietary Information of ZTE CORPORATION

231

ZXWN MSCS Data Configuration Guide(MGCF)

Call
Service
Types

Meanings

Description

IGWLP

IGW local-office
paid special
service

Indicates that the subsequent


call procedures are processed
based on the IGW local-office paid
special service procedure

IGWOV

IGWOVERLAY
prefix incoming
service

Indicates that the subsequent


call procedures are processed
based on the IGWOVERLAY prefix
incoming service procedure

IGWDDCIN

IGW toll DDC


incoming call

Indicates that the subsequent call


procedures are processed based
on the IGW toll DDC incoming call
service procedure

IGWDDCLOCAL

IGW local DDC


call

Indicates that the subsequent call


procedures are processed based
on the IGW local DDC call service
procedure

Test call

Indicates that the subsequent call


procedures are processed based
on the test call service procedure.
It is used to analyze test calls

TEST

TABLE 94 ENABLED OPTIONS


Enabled
Options

CCS7

CHGK

232

Meanings

Description

Automatically sending
the calling number when
using CCS7 for outgoing
services

It indicates whether the


outgoing TUP signaling
carries the calling
number. When the local
office actively sends the
calling number, it sends
an IAI message of TUP
signaling to the peer-end
office, carrying the calling
number. Otherwise, the
local office sends an
IAM message of TUP
signaling to the peer-end
office, not carrying
the calling number.
For ISUP signaling, it
indicates whether the
local MSC number is filled
in the location number
information

Changing the type of


calling subscribers

Indicates whether to
set the type of the
calling subscriber in the
outgoing IAM message of
ISUP or BICC signaling
to the calling subscriber
types flexibly configured
in security variables

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Enabled
Options

Meanings

Description

CHGN

Changing the number

Indicates that the


analyzed number is
changed, and the system
notifies the calling
subscriber by playing
the tone

DELA

Delayed dialing of the


special service

Reserved

MAIL

166-voice-mailbox
service

Indicates that the call


is a 166-voice-mailbox
service

NSCP

Not waiting for SCP


responses

Reserved

RRTO

Rerouting after outgoing


failure

For incoming calls


using ISUP, TUP, or
BICC signaling, the
call procedure is an
outgoing call procedure.
When the local office
does not receives a REL
message after sending an
outgoing IAM message to
the peer-end office, this
option control whether
rerouting is allowed

NETF

IN forward message

Reserved

VNUM

Virtual number

Reserved

HRA

High rate

Reserved

NTC

Not triggering IN service


of the calling number

Indicates whether the


call triggers the IN
service of the calling
number. This option is
used for the case where
the IN service of the
calling number cannot
be triggered when the
call to the IN subscriber
is forwarded or when
some special numbers
are dialed

NCEL

No call when the called


number exceeds the
length

Indicates whether the


system releases the call
if the analyzed number
exceeds the configured
maximum digit length

Interception number
incoming

Indicates whether the


call is an incoming
call returned from the
interception center. This
option is only used in the
IGW system

LSIN

Confidential and Proprietary Information of ZTE CORPORATION

233

ZXWN MSCS Data Configuration Guide(MGCF)

Enabled
Options

CON

SHLRF

SHLRG

JUDG

REBO

Meanings

Description

Sending the connect


message in advance
(only for IGW)

Indicates whether the


local office sends a
ringing message of the
called subscriber and a
connect message to
the calling subscriber
at the same time (that
is, sends a connect
message to the calling
subscriber before the
called subscriber answers
the call). This option is
only used in the IGW
system

Not triggering SHLR


query

Indicates whether the


number section needs
to be transformed in
the SHLR during call
origination. In the
SHLR mixed networking,
common call origination
procedures need to
interact with the SHLR
to get the calling
logic number, and the
called physical number.
However, in the specific
calls, the called number
needs no transform. In
this case, select this
option in the number
analysis result. This
option is only used in the
IGW system

Over net number in SHLR

Indicates whether the


incoming call restrain
the SHLR from returning
the IN access code. This
option is used to prevent
repeatedly triggering IN
services. This option is
only used in the IGW
system

Needing to judge the IP


resource

Indicates whether the


routing query in the SHLR
is forcibly performed
during IP calls. This
option is only used in the
IGW system

Restraining HOMEBOX
service

Indicates whether
incoming calls trigger
the HOMEBOX service
in the local office. This
option is only used in the
IGW system

Example: Configure the called number analysis with the following requirements.

234

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Analyzer entry: 1

User alias: TPDNAL1

Analyzed number: 13902099

Call service type: MSC common service

Other parameters: Adopt the default values.

The command is:


ADD TPDNAL:ENTR=1,DIGIT="13902099",NAME="TPDN
AL1",SPECRST=0,SPECIDX=0,CAT=MSCO,RST1=0,RST2
=0,RST3=0,CHAINAL=0,RNLEN=0,MINLEN=3,MAXLEN
=20,OVLYPRI=NO,REL=NO,NET=1,NAT=DEF,OPDDICO
NT=NO,TPDDICONT=NO,OPDDI=0,TPDDI=0,OPDLYDD
I=0,TPDLYDDI=0,DDIOVERB=0,IWVIDEO=LSUP,TIMEL
MT=0,AUXDAS=0,A6=0,PFXLEN=0,INSRV=INM,FAXIDX
=0,AVIDX=0,DVIDX=0,ADATAIDX=0,DDATAIDX=0,DDC
PLAY=NONE,VAD=CLOSE,CALLSERVPRILVL=INVALID,RE
RTS=0,INCHAIN=NO,BICT=NO,ICT=0,ICTT=10,GNM=NO
RMAL,STBILL=INVALID,HOPDAS=0;
Example: Configure the roaming number analysis of the local
office with the following requirements.

Analyzer entry: 1

User alias: TPDNAL1

Analyzed number: 15902099

Call service type: MSC local service

Other parameters: Adopt the default values.

The command is:


ADD TPDNAL:ENTR=1,DIGIT="15902099",NAME="TPDN
AL2",SPECRST=0,SPECIDX=0,CAT=MSLL,RST1=0,RST2
=0,RST3=0,CHAINAL=0,RNLEN=0,MINLEN=3,MAXLEN
=20,OVLYPRI=NO,REL=NO,NET=1,NAT=DEF,OPDDICO
NT=NO,TPDDICONT=NO,OPDDI=0,TPDDI=0,OPDLYDD
I=0,TPDLYDDI=0,DDIOVERB=0,IWVIDEO=LSUP,TIMEL
MT=0,AUXDAS=0,A6=0,PFXLEN=0,INSRV=INM,FAXIDX
=0,AVIDX=0,DVIDX=0,ADATAIDX=0,DDATAIDX=0,DDC
PLAY=NONE,VAD=CLOSE,CALLSERVPRILVL=INVALID,RE
RTS=0,INCHAIN=NO,BICT=NO,ICT=0,ICTT=10,GNM=NO
RMAL,STBILL=INVALID,HOPDAS=0;
END OF STEPS

Trunk Data Configuration


Overview
The related operations of the trunk data configuration are as follows.

Confidential and Proprietary Information of ZTE CORPORATION

235

ZXWN MSCS Data Configuration Guide(MGCF)

Steps

Operations

Instructions

Commands

Creating a DT
trunk group

When the A
interface and Ai
interface adopts
the TDM bearer,
or when MGWs
are interconnected
through the TDM
bearer, configure DT
trunk groups

ADD TG DT

Creating an
ATM trunk
group

When the ATM bearer


is adopted between
MGWs, configure
ATM trunk groups

ADD TG ATM

Creating a RTP
trunk group

When the IP bearer


is adopted between
MGWs, configure
BICC trunk groups.
When the MSCS
servers as a MGCF,
configure SIP trunk
groups for MGWs

ADD TG RTP

Creating a PCM
system

DT, ATM, and RTP


trunk groups all need
to be configured with
PCM systems

ADD SPCM

Creating a
PCM system
between MGWs

When the MGWs


managed by
one MSCS are
interconnected
through TDM
circuits, no trunk
group or trunk
route needs to
be configured,
and only PCM
systems between
the MGWs need to
be configured

ADD INPCM

Creating a DT Trunk Group


Prerequisites

Context

236

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The adjacent office to which the trunk group points is created.

The trunk group No. range is set in the resource management


system.

The MML Terminal window is opened.

When the Ai interface adopts the TDM bearer, or when IM-MGWs


are interconnected through the TDM bearer, DT trunk groups need
to be configured. The circuit status in each trunk group is managed
by the corresponding trunk management module, so it is required

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

to configure multiple trunk groups to each 2G MSC/PSTN office


(4~8 trunk groups are recommended). To implement load sharing,
it is required to allocate roughly the same number of Ai interface
circuits to each CMP module.
Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a DT trunk group by executing command ADD TG DT.
The explanation of the main parameters in command ADD TG
DT is shown in Table 95.
TABLE 95 PARAMETERS IN THE ADD TG DT COMMAND
Parameter
Name

Parameter Description

Instruction

Trunk group ID

It is a mandatory
parameter. It is used
to define a trunk
group, and needs to be
planned in the resource
management system in
advance

ID of the office where


the trunk group belongs

It is a mandatory
parameter. It is
used to specify the
corresponding office of
the trunk group. This
parameter must be
defined by command
ADD ADJOFC at first.
Then it can be indexed
here

MODULE

Module where the trunk


group belongs

It is a mandatory
parameter. It indicates
a service module.
Different trunk groups
to the same office
need to be allocated to
different CMP modules

ND

Node No. of the MGW


where the trunk group
belongs

It is a mandatory
parameter. Select the
MGW topology node
connected with the 2G
MSC/PSTN node

User alias

It is an optional
parameter, consisting
of 0~50 characters. It
is used to specifically
describe a trunk group
to make it easily
recognized

TG

OFC

NAME

Confidential and Proprietary Information of ZTE CORPORATION

237

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter Description

Instruction

Inter-office line signal


identification. Options
include:

BSC: BSC Ground


Circuit

TUP: Interoffice
Common Channel
Signaling TUP

ISUP: Interoffice
Common Channel
Signaling ISUP

DLC1: Interoffice
Channel Associated
Signaling DL/DC(1)

R2: R2 Signaling

BICC: BICC Type

ANU: ANU Signaling

SORMUP: SORMUP
Signaling

SIGLINE

It is an optional
parameter. It is used
to identify the line type
of this trunk. Select it
according to inter-office
signaling. For the Ai
interface, select ISUP
or TUP

Trunk group types,


including the following
three types:
IN (incoming trunk
group): Indicates
that the local office
processes the incoming
calls from the peer-end
office.

KIND

OUT (outgoing trunk


group): Indicates that
the local office only
processes the outgoing
calls to the peer-end
office.
BIDIR (Two-way trunk
group): Indicates
that the local office
processes both the
incoming calls from the
peer-end office and the
outgoing calls to the
peer-end office

238

Confidential and Proprietary Information of ZTE CORPORATION

It is an optional
parameter. If BSC
is selected for the
inter-office line signal
identification, it must be
configured to BIDIR

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter Description

Instruction

Bearer establishment
direction, including the
following three types:
NODIR: The inter-office
bearer is established
without direction.
BWAY

BACK: The inter-office


bearer is established
based on the backward
mode.

It is an optional
parameter. Select
NODIR for DT trunk
groups

FORWD: The
inter-office bearer is
established based on
the forward mode

Overload control
threshold

THD

It is an optional
parameter, ranging from
0 to 100, with a default
of 100. This parameter
takes effect when levels
of congestion occur and
load control is required

Circuit selecting modes,


including:
MIN: Every time when
the system selects a
trunk circuit, it always
begins with the circuit
with the minimum
number. This mode can
implement the preferred
plan of trunk circuits.

CICSEL

MAX: Every time when


the system selects a
trunk circuit, it always
begins with the circuit
with the maximum
number. This mode can
implement the preferred
plan of trunk circuits.
CYC: Every time when
the system selects
a trunk circuit, it
always begins with
the circuit next to the
one previously selected.
Suppose the numbers
of the trunk circuits in a
trunk group in ascending
order are TKC0, TKC1,
. , TKCn. If TKC0
is selected at the first
time, the system will
select the trunk circuit
in the order of TKC0T
KC1TKCnTKC0
TKC1TKCn.

It is an optional
parameter. It is used to
specify the trunk circuit
selecting policy of the
system within this trunk
group, with a default of
CYC. If this No.7 trunk
group is a two-way
trunk group, it is
recommended to set the
circuit selecting mode
to ODD/EVEN mode
to prevent contention
when two exchanges
select circuits

ODD: Every time when


the system selects a

Confidential and Proprietary Information of ZTE CORPORATION

239

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter Description
trunk circuit, it always
selects the circuit with
an odd number.

Instruction

EVEN: Every time when


the system selects a
trunk circuit, it always
selects the circuit with
an even number.
IDLE: Every time when
the system selects a
trunk circuit, it always
selects the idlest circuit.
BUSY: Every time when
the system selects a
trunk circuit, it always
selects the busiest
circuit

DAS

SIPDAS

OPDAS

PREDAS

240

DAS for the called


number

It is an optional
parameter. It is used
to analyze the called
number in an incoming
call. This parameter
must be defined by
command ADD DAS at
first. Then it can be
indexed here

DAS for the domain


name of the called
number during a SIP
outgoing call

It is used get the name


of the IMS domain
where the called party
is located through
analyzing the called
number during a SIP
outgoing call. It is
only used for RTP trunk
groups

DAS for the calling


number

It is used to analyze
the calling number in
an incoming call. This
parameter must be
defined by command
ADD DAS at first. Then
it can be indexed here

DAS for pre-analyzing


the called number

It is used to pre-analyze
the called number in
an incoming call. This
parameter must be
defined by command
ADD PREDAS at first.
Then it can be indexed
here

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

DDI

OPDDI

MINNAT

MAXNAT

MININT

MAXINT

Parameter Description

Instruction

Incoming called number


transform ID

It is the index of
the incoming called
number transform. This
parameter must be
defined by command
ADD DDI at first. Then
it can be indexed here

Incoming calling
number transform ID

It is the index of
the incoming calling
number transform. This
parameter must be
defined by command
ADD DDI at first. Then
it can be indexed here

Minimum national
number length

It is an optional
parameter, which is
an integer ranging from
0 to 26, with a default
of 0. It is used to
specify the minimum
digit length of the
called number during a
national incoming call

Maximum national
number length

It is an optional
parameter, which is
an integer ranging from
0 to 26, with a default
of 26. It is used to
specify the maximum
digit length of the
called number during a
national incoming call

Minimum international
number length

It is an optional
parameter, which is
an integer ranging from
0 to 26, with a default
of 0. It is used to
specify the minimum
digit length of the
called number during an
international incoming
call

Maximum international
number length

It is an optional
parameter, which is
an integer ranging from
0 to 26, with a default
of 26. It is used to
specify the maximum
digit length of the
called number during an
international incoming
call

Confidential and Proprietary Information of ZTE CORPORATION

241

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter Description

Instruction

INREG

Incoming register
signaling flag, including
options: INVALID,
MFC, MFP, DTMF, DP
and MF

It is an optional
parameter, with a
default of INVALID

OUTREG

Outgoing register
signaling flag, including
options: INVALID,
MFC, MFP, DTMF, DP
and MF

It is an optional
parameter, with a
default of INVALID

COLEN

The maximum length of


CAS calling number end

It is an optional
parameter. It ranges
from 1 to 32, with a
default of 10.

Trunk circuit usage

It is an optional
parameter, which is
an integer ranging
from 1 to 100, with a
default of 100. After
the trunk circuit usage
is configured, when the
ratio of busy circuits to
all circuits in this trunk
group exceeds this
value, congestion occurs
in this trunk group.
After the congestion
is relieved, report the
trunk congestion times
and congestion duration
in the performance
statistics. This
parameter does not
take effect when it is
configured to 100

DAS for roaming


numbers

It is an optional
parameter. After this
DAS is configured, if
the local office serves
as a GMSC, this DAS
is preferred for the
returned roaming
numbers. Otherwise,
the roaming number
DAS configured in
the number analysis
template is used

BUSYRATE

ROAMDAS

242

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter Description

Instruction

Q850CCIDX

Q850 customization
index

It is an optional
parameter. It ranges
from 0 to 65535, with a
default of 0.

ID of signaling
modification entrance

It is an optional
parameter, associated
with the inter-office
signaling modification
entrance. It ranges
from 0 to 65535, with a
default of 0

SMENTERID

Example: Create a DT trunk group to the 2G MSC office with


the following requirements:

Trunk group ID: 1

ID of the office where the trunk group belongs: 28

User alias: MSC28

No. of the CMP module where the trunk group belongs: 3

MGW topology node No.: 101

Other parameters: Adopt the default values.

The command is:


ADD TG DT:TG=28,OFC=28,MODULE=5,ND=101,NAME
="MSC28",SIGLINE=ISUP,KIND=BIDIR,BWAY=NODIR,TH
D=100,CICSEL=ODD,DAS=0,SIPDAS=0,OPDAS=0,PRED
AS=0,DDI=0,OPDDI=0,MINNAT=0,MAXNAT=26,MININT
=0,MAXINT=26,INREG=INVALID,OUTREG=INVALID,COLE
N=10,BUSYRATE=100,ROAMDAS=0,Q850CCIDX=0,SME
NTERID=0,MLPPDM=4294967295,DISINDEX=0;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating an ATM Trunk Group


Prerequisites

Context

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The trunk group No. range is set in the resource management


system.

The adjacent MGW office to which the trunk group points is


created.

The MML Terminal window is opened.

When the ATM bearer is adopted between MGWs, configure ATM


trunk groups.

Confidential and Proprietary Information of ZTE CORPORATION

243

ZXWN MSCS Data Configuration Guide(MGCF)

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create an ATM trunk group by executing command ADD TG
ATM.
The explanation of the main parameters in command ADD TG
ATM is shown in Table 96.
TABLE 96 PARAMETERS IN THE ADD TG ATM COMMAND
Parameter
Name

TG

OFC

NAME

MODULE

ND

244

Parameter Description

Instruction

Trunk group ID

It is a mandatory
parameter. It is used
to define an ATM trunk
group, and needs to be
planned in the resource
management system in
advance. It is a global
unified number

ID of the office where


the trunk group belongs

It is a mandatory
parameter, ranging
from 1 to 256. It is
used to specify the
corresponding office of
the trunk group. This
parameter must be
defined by command
ADD ADJOFC at first.
Then it can be indexed
here

User alias

It is an optional
parameter, consisting
of 0~50 characters.
It is used to specifically
describe a trunk group to
make it easily recognized

Module where the trunk


group belongs

It is a mandatory
parameter, which is
an integer, ranging from
1 to 127. It is used to
specify the SMP module
of processing traffic on
this trunk group

Node No. of the MGW


where the trunk group
belongs

It is a mandatory
parameter, which is
an integer, ranging from
1~2048. It is used to
specify the topology
node No. of the MGW
providing bearer, which
is controlled by the local
MGCF

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter Description

Instruction

SIGLINE

Inter-office line signal


identification, including
BICC (BICC signaling)

It is an optional
parameter. It is used to
identify the line type of
this trunk, with a default
of BICC

Trunk group types,


including the following
three types:
IN (incoming trunk
group): Indicates that
the local office processes
the incoming calls from
the peer-end office.

KIND

OUT (outgoing trunk


group): Indicates that
the local office only
processes the outgoing
calls to the peer-end
office.
BIDIR (Two-way trunk
group): Indicates that
the local office processes
both the incoming calls
from the peer-end office
and the outgoing calls to
the peer-end office

It is an optional
parameter. It is used
to specify the call
connection direction
in this trunk group in
the local office, with
a default of BIDIR. It
should be negotiated
with the peer-end office

Bearer establishment
direction, including the
following three types:
NODIR (No direction):
The inter-office bearer
is established without
direction.
BWAY

BACK: The inter-office


bearer is established
based on the backward
mode.

It is an optional
parameter. It is used to
specify the inter-office
bearer establishment
direction, with a default
of NODIR

FORWD: The
inter-office bearer is
established based on the
forward mode

THD

Overload control
threshold

It is an optional
parameter, ranging from
0 to 100, with a default
of 100. This parameter
takes effect when levels
of congestion occur and
load control is required

Confidential and Proprietary Information of ZTE CORPORATION

245

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter Description

Instruction

Circuit selecting modes,


including:
MIN: Every time when
the system selects a
trunk circuit, it always
begins with the circuit
with the minimum
number. This mode can
implement the preferred
plan of trunk circuits.
MAX: Every time when
the system selects a
trunk circuit, it always
begins with the circuit
with the maximum
number. This mode can
implement the preferred
plan of trunk circuits.

CICSEL

CYC: Every time when


the system selects
a trunk circuit, it
always begins with
the circuit next to the
one previously selected.
Suppose the numbers
of the trunk circuits in a
trunk group in ascending
order are TKC0, TKC1,
. , TKCn. If TKC0
is selected at the first
time, the system will
select the trunk circuit in
the order of TKC0TKC
1TKCnTKC0TK
C1TKCn.
ODD: Every time when
the system selects a
trunk circuit, it always
selects the circuit with
an odd number.
EVEN: Every time when
the system selects a
trunk circuit, it always
selects the circuit with
an even number.
IDLE: Every time when
the system selects a
trunk circuit, it always
selects the idlest circuit.
BUSY: Every time when
the system selects a
trunk circuit, it always
selects the busiest circuit

246

Confidential and Proprietary Information of ZTE CORPORATION

It is an optional
parameter. It is used to
specify the trunk circuit
selecting policy of the
system within this trunk
group, with a default
of CYC. If this trunk
group is a two-way
trunk group, it is
recommended to set the
circuit selecting mode
to ODD/EVEN mode to
prevent contention when
two exchanges select
circuits

Chapter 7 Basic Service Data Configuration

Parameter
Name

DAS

SIPDAS

OPDAS

PREDAS

DDI

OPDDI

MINNAT

Parameter Description

Instruction

DAS for the called


number

It is an optional
parameter. It is used
to analyze the called
number in an incoming
call. This parameter
must be defined by
command ADD DAS at
first. Then it can be
indexed here

DAS for the domain


name of the called
number during SIP
outgoing calls

It is used get the name


of the IMS domain
where the called party
is located through
analyzing the called
number during a SIP
outgoing call. It is
only used for RTP trunk
groups

DAS for the calling


number

It is used to analyze
the calling number in
an incoming call. This
parameter must be
defined by command
ADD DAS at first. Then
it can be indexed here

DAS for pre-analyzing


the called number

It is used to pre-analyze
the called number in
an incoming call. This
parameter must be
defined by command
ADD PREDAS at first.
Then it can be indexed
here

Incoming called number


transform ID

It is the index of
the incoming called
number transform. This
parameter must be
defined by command
ADD DDI at first. Then
it can be indexed here

Incoming calling number


transform ID

It is the index of
the incoming calling
number transform. This
parameter must be
defined by command
ADD DDI at first. Then
it can be indexed here

Minimum national
number length

It is an optional
parameter, which is an
integer ranging from 0 to
26, with a default of 0.
It is used to specify the
minimum digit length of
the called number during
a national incoming call

Confidential and Proprietary Information of ZTE CORPORATION

247

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

MAXNAT

MININT

MAXINT

INREG

Parameter Description

Instruction

Maximum national
number length

It is an optional
parameter, which is an
integer ranging from 0 to
26, with a default of 26.
It is used to specify the
maximum digit length of
the called number during
a national incoming call

Minimum international
number length

It is an optional
parameter, which is an
integer ranging from 0 to
26, with a default of 0.
It is used to specify the
minimum digit length
of the called number
during an international
incoming call

Maximum international
number length

It is an optional
parameter, which is an
integer ranging from 0 to
26, with a default of 26.
It is used to specify the
maximum digit length
of the called number
during an international
incoming call

Incoming register
signaling flag. Options
include:
INVALID

OUTREG

Outgoing register
signaling flag. Options
include:
INVALID

COLEN

BUSYRATE

248

It is an optional
parameter, with a default
value of INVALID

It is an optional
parameter, with a default
value of INVALID

The maximum length of


CAS calling number end

It is an optional
parameter. It ranges
from 1 to 32, with a
default of 10.

Trunk circuit usage

It is an optional
parameter, which is
an integer ranging
from 1 to 100, with a
default of 100. After
the trunk circuit usage
is configured, when the
ratio of busy circuits
to all circuits in this
trunk group exceeds this
value, congestion occurs
in this trunk group.
After the congestion
is relieved, report the
trunk congestion times
and congestion duration
in the performance
statistics. This

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter Description

Instruction
parameter does not
take effect when it is
configured to 100

ROAMDAS

DAS for roaming


numbers

It is an optional
parameter. After this
DAS is configured, if
the local office serves
as a GMSC, this DAS
is preferred for the
returned roaming
numbers. Otherwise,
the roaming number
DAS configured in
the number analysis
template is used

Q850CCIDX

Q850 customization
index

It is an optional
parameter. It ranges
from 0 to 65535, with a
default of 0.

ID of signaling
modification entrance

IIt is an optional
parameter, associated
with the inter-office
signaling modification
entrance. It ranges
from 0 to 65535, with a
default of 0

SMENTERID

Example: Create an ATM trunk group with the following requirements.

Trunk group ID: 1

ID of the office where the trunk group belongs: 102

User alias: MGW102

No. of the module processing the trunk group: 3

MGW topology node No.: 101

Inter-office line signal identification: BICC

Other parameters: Adopt the default values.

The command is:


ADD TG ATM:TG=102,OFC=102,MODULE=5,ND=101,NA
ME="MGW102",SIGLINE=BICC,KIND=BIDIR,BWAY=NODI
R,THD=100,CICSEL=ODD,DAS=0,SIPDAS=0,OPDAS=0,P
REDAS=0,DDI=0,OPDDI=0,MINNAT=0,MAXNAT=26,M
ININT=0,MAXINT=26,INREG=INVALID,OUTREG=INVALI
D,COLEN=10,BUSYRATE=100,ROAMDAS=0,Q850CCIDX
=0,SMENTERID=0,MLPPDM=4294967295,DISINDEX=0;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

249

ZXWN MSCS Data Configuration Guide(MGCF)

Creating RTP Trunk Group


Prerequisites

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The adjacent IM-MGW office to which the trunk group points is


created.

The trunk group No. range is set in the resource management


system.

The MML Terminal window is opened.

Context

When the IP bearer is adopted between MGWs, configure RTP trunk


groups, which are BICC trunk groups.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Creating a RTP trunk group by executing command ADD TG
RTP.
The explanation of the main parameters in command ADD TG
RTP is shown in Table 97.
TABLE 97 PARAMETERS IN THE ADD TG RTP COMMAND
Parameter
Name

TG

OFC

NAME

250

Parameter
Description

Instruction

Trunk group ID

It is a mandatory
parameter. It is used
to define a trunk group.
This trunk group can be
BICC trunk group or SIP
trunk group. It is a global
unified number

ID of the office where


the trunk group
belongs

It is a mandatory
parameter. It is used to
specify the corresponding
office of the trunk group.
This parameter must be
defined by command ADD
ADJOFC at first. Then it
can be indexed here

User alias

It is an optional parameter,
consisting of 0~50
characters. It is used
to specifically describe a
trunk group to make it
easily recognized

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

MODULE

Parameter
Description

Instruction

Module where the


trunk group belongs

It is a mandatory
parameter, which is an
integer, ranging from 1
to 127. It is used to
specify the SMP module of
processing traffic on this
trunk group

Inter-office line
signal identification,
including
SIGLINE

BICC (BICC
signaling)

SIP (SIP
signaling)

It is an optional parameter.
Select SIP for the MGCF.

Trunk group types,


including the following
three types:
IN (incoming trunk
group): Indicates
that the local
office processes the
incoming calls from
the peer-end office.

KIND

OUT (outgoing trunk


group): Indicates
that the local office
only processes the
outgoing calls to the
peer-end office.

It is an optional parameter.
BIDIR is selected by
default. It should be
negotiated with the
peer-end office.

BIDIR (Two-way
trunk group):
Indicates that the local
office processes both
the incoming calls
from the peer-end
office and the outgoing
calls to the peer-end
office
Bearer establishment
direction, including
the following three
types:

BWAY

NODIR (No
direction): The
inter-office bearer
is established without
direction.
BACK: The inter-office
bearer is established
based on the backward
mode.

It is an optional parameter.
For RTP trunk groups, it
is set according to the
network plan of operators

FORWD: The
inter-office bearer
is established based
on the forward mode

Confidential and Proprietary Information of ZTE CORPORATION

251

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

THD

Threshold for overload


control

It is an optional parameter,
ranging from 0 to 100, with
a default of 100

Circuit selecting
modes, including:
MIN: Every time when
the system selects a
trunk circuit, it always
begins with the circuit
with the minimum
number. This mode
can implement the
preferred plan of trunk
circuits.
MAX: Every time
when the system
selects a trunk
circuit, it always
begins with the circuit
with the maximum
number. This mode
can implement the
preferred plan of trunk
circuits.

CICSEL

CYC: Every time when


the system selects
a trunk circuit, it
always begins with the
circuit next to the one
previously selected.
Suppose the numbers
of the trunk circuits
in a trunk group in
ascending order are
TKC0, TKC1, . ,
TKCn. If TKC0 is
selected at the first
time, the system will
select the trunk circuit
in the order of TKC0
TKC1TKCnTK
C0TKC1TKCn.
ODD: Every time
when the system
selects a trunk circuit,
it always selects the
circuit with an odd
number.
EVEN: Every time
when the system
selects a trunk circuit,
it always selects the
circuit with an even
number.
IDLE: Every time
when the system
selects a trunk circuit,
it always selects the
idlest circuit.

252

Confidential and Proprietary Information of ZTE CORPORATION

It is an optional parameter,
with a default of CYC. In
general, the signaling point
with big code prefers the
circuit with an even number,
while the one with small
code prefers the circuit
with an odd number. It
should be negotiated with
the peer-end office

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter
Description

Instruction

BUSY: Every time


when the system
selects a trunk circuit,
it always selects the
busiest circuit

DAS for the called


number

DAS

SIPDAS

DAS for the domain


name of the called
number during SIP
outgoing calls

It is an optional parameter,
which is an integer ranging
from 0 to 4096, with a
default of 0. When the
local office has the GMSC
function, this DAS is used to
analyze the called number
from other offices. When
the called number is from
the BSC office, this DAS is
meaningless, and does not
need to be configured
It is used get the name
of the IMS domain where
the called party is located
through analyzing the
called number during a
SIP outgoing call. If the
outgoing SIP trunk group
is configured with this
DAS, the invite message
during a SIP outgoing call
can only contain SIP URL
mode. If the outgoing
SIP trunk group is not
configured with this DAS,
configure the URLOPT in
the SIP adjacent office
configuration to decide
whether the outgoing call
uses TEL or SIP URL mode.
After this DAS is used
on this trunk group, all
outgoing calls on this
trunk group will get the
corresponding domain
name according to the
called number, and then
form a SIP URL

OPDAS

DAS for the calling


number

It is an optional parameter,
which is an integer ranging
from 0 to 4096, with a
default of 0. When the
local office has the GMSC
function, this DAS is used to
analyze the calling number
from other offices. When
the calling number is from
the BSC office, this DAS is
meaningless, and does not
need to be configured

Confidential and Proprietary Information of ZTE CORPORATION

253

ZXWN MSCS Data Configuration Guide(MGCF)

Example: Create a RTP trunk group with the following requirements.

Trunk group ID: 1

ID of the office where the trunk group belongs: 102

User alias: IM-MGW102

No. of the module processing the trunk group: 3

Inter-office line signal identification: BICC

Other parameters: Adopt the default values.

The command is:


ADD TG RTP:TG=1,OFC=102,MODULE=5,NAME="IM-M
GW102",SIGLINE=BICC,KIND=BIDIR,BWAY=NODIR,THD
=100,CICSEL=CYC,DAS=0,SIPDAS=0,OPDAS=0,PREDA
S=0,DDI=0,OPDDI=0,MINNAT=0,MAXNAT=26,MININT
=0,MAXINT=26,INREG=INVALID,OUTREG=INVALID,COLE
N=10,BUSYRATE=100,ROAMDAS=0,Q850CCIDX=0,SME
NTERID=0,MLPPDM=4294967295,SIPRUTS=0,DISINDEX
=0;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating PCM
Prerequisites

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The DT, ATM, or RTP trunk group is configured.

The MML Terminal window is opened.

Context

The PCM system management data associate the resources on the


MGW with the signaling on the MGCF.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create PCM by executing command ADD SPCM.
The explanation of the main parameters in command ADD
SPCM is shown in Table 98.

254

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

TABLE 98 PARAMETERS IN THE ADD SPCM COMMAND


Parameter
Name

TG

Parameter
Description

Instruction

No. of the trunk


group where
the PCM system
belongs

It is a mandatory parameter,
which is an integer, ranging
from 1~1000. Select the
trunk group where this PCM
system belongs from the list
of configured trunk groups. It
is used to specify the trunk
group invoking this PCM
system. This parameter is
associated with the trunk
group No. in command ADD
TG ATM, ADD TG DT, ADD
TG PRA, and ADD TG RTP
It is a mandatory parameter.
It is a parameter for
interconnection with the
peer-end office. If the
configured PCM system
belongs to the inter-office
trunk, the PCM system No. of
the same circuit between two
offices must be the same.

PCM

PCM system No.

When the inter-office line


identification of a trunk group
is TUP or ISUP, the PCM
system No. ranges from 0 to
127.
When the inter-office line
identification of a trunk group
is BICC, the PCM system No.
ranges from 0 to 5999.
When the inter-office line
identification of a trunk group
is BSC or ANU, the PCM
system No. ranges from 0 to
2047

Number of created
PCM systems

NUM

PCM No. in the


MGW

MGWPCM

The corresponding
trunk group can
invoke the PCM
resources between
the start PCM No.
in the MGW and the
end PCM No.

It is an optional parameter. If
PCM systems belong to a DT
trunk group, this parameter
needs not be configured. If
PCM systems belong to a RTP
or ATM trunk group, select
the number the created PCM
systems
It is an optional parameter.
If the PCM system belongs
to a RTP or ATM trunk group,
this parameter needs not be
configured. If the PCM system
belongs to a DT trunk group,
select the corresponding PCM
No. in the MGW

Confidential and Proprietary Information of ZTE CORPORATION

255

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

NAME

E1

DDF

Parameter
Description

Instruction

User alias

It is an optional parameter,
consisting of 1~50 characters.
It is used to specifically
describe the PCM system
configuration to make it
easily recognized

E1 identification

It is an optional parameter,
consisting of 1~50 characters.
For DT trunk groups,
describes the E1 with any
characters, which can be set
to DTB/SDTB unit No.-E1
No.

Digital Distribution
Frame (DDF)
location description

It is an optional parameter,
consisting of 1~50 characters.
For DT trunk groups, the DDF
location description can be set
to Frame No.-Row No.-Port
No.

Example: Create PCM to the 2G MSC office with the following


requirements:

No. of the trunk group where the PCM system belongs: 28

PCM No.: 1

PCM No. in the MGW: 1-1

User alias: 2G MSC1-1.

The command is:


ADD SPCM:TG=28,PCM=0,MGWPCM="1"-"1",INFO=6553
5,NAME="2G MSC1-1";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Configure a PCM System between


MGWs
Prerequisites

Context

256

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The bearer mode between the MGWs is configured in the topology configuration.

The MML Terminal window is opened.

When the MGWs managed by one MGCF are interconnected


through TDM circuits, it is required to configure the PCM systems
between the MGWs. Since the MGWs are interconnected within

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

the MGCF, it is required to add the bearer mode between the


MGWs in the topology configuration, but no trunk group, trunk
route or other parameters need to be configured.
Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a PCM system between MGWs by executing command
ADD INPCM.
The explanation of the main parameters in command ADD
INPCM is shown in Table 99.
TABLE 99 PARAMETERS IN THE ADD INPCM COMMAND
Parameter
Name

Parameter
Description

Instruction

ND1

MGW1 node No.

It is a mandatory parameter.
Enter the topology node No. of
MGW1

ND2

MGW2 node No.

It is a mandatory parameter.
Enter the topology node No. of
MGW2

PCM

PCM system No.

It is a mandatory parameter.
Enter the PCM system No. in the
MSCS

ND1PCM

PCM No. in
MGW1

It is a mandatory parameter.
Enter the PCM system No. in
MGW1

ND2PCM

PCM No. in
MGW2

It is a mandatory parameter.
Enter the PCM system No. in
MGW2

MODULE

Management
module No.

It is a mandatory parameter.
Select the No. of the CMP module
of managing this PCM system

PCMTYPE

PCM type

It is an optional parameter, with a


default of E1

NAME

User alias

It is an optional parameter, which


is in the format of Adjacent office
MGW1 user alias-Adjacent office
MGW2 user alias-PCM system No.

ND1E1

E1 identification

It is an optional parameter, which


can be set to DTB/SDTB unit
No.-E1 No.

ND1DDF

DDF location
description

It is an optional parameter, which


can be set to Frame No.-Row
No.-Port No.

Confidential and Proprietary Information of ZTE CORPORATION

257

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter
Description

Instruction

ND2E1

MGW2 E1 ID

It is an optional parameter, which


can be set to DTB/SDTB unit
No.-E1 No.

ND2DDF

Description of
MGW2 DDF
location

It is an optional parameter, which


can be set to Frame No.-Row
No.-Port No.

Example: Add a PCM system between MGWs with the following


requirements.

PCM system No.: 0

PCM No. in MGW1 and MGW2: 1

Management module No.: 3

User alias: MGW1-MGW2.

The command is:


ADD INPCM:ND1=101,ND2=102,PCM=0,ND1PCM=1,ND2
PCM=1,MODULE=3,PCMTYPE=E1,NAME="MGW1-MGW2";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Route Data Configuration


Overview
Description

Outgoing route chains are directly referred to in number analysis


results. Each outgoing route chain contains at most 4 outgoing
route groups (in active/standby relationship), and each outgoing
route group contains at most 12 outgoing routes (in load sharing
relationship). The outgoing route has a one-to-one correspondence with the trunk group.

Data Configuration

The related operations of the routing data configuration are as follows.

258

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Steps

Operations

Instructions

Commands

Creating an
outgoing route

Each trunk group


corresponds to an
outgoing route.

ADD RT

Creating an
outgoing route
set

Each route
belongs to a
route group, and
each route group
contains at most
12 routes.

ADD RTS

Creating an
outgoing route
chain

Each outgoing
route group
belongs to an
outgoing route
chain, and each
route chain
contains at most
4 route groups.

ADD CHAIN

Creating a Route
Prerequisites

Context
Steps

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The outgoing route No. range is set in the resource management system.

The MML Terminal window is opened.

Each trunk group corresponds to an outgoing route.


1. If no exchange is specified, execute command SET on the MML
Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create route by executing command ADD RT.
The explanation of the main parameters in command ADD RT
is shown in Table 100.
TABLE 100 PARAMETERS IN THE ADD RT COMMAND
Parameter Name

RT

Parameter
Description

Instruction

Route No.

It is a mandatory parameter,
which is an integer, ranging
from 1~2000. It exclusively
identifies a route. To facilitate
management, the route No. is
configured to be consistent with
the trunk group No.

Confidential and Proprietary Information of ZTE CORPORATION

259

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter Name

Parameter
Description

Instruction

TG

Trunk group No.

It is a mandatory parameter,
corresponding to the trunk
group No. in the trunk group
configuration

Called number
transform index
during outgoing
calls

It is an optional parameter, which


is an integer ranging from 0 to
2048, with a default of 0. The
called number is transformed
according to this index during
outgoing calls. This index has no
influence on the incoming calls
through this trunk

OPDDI

Calling number
transform index
during outgoing
calls

It is an optional parameter, which


is an integer ranging from 0 to
2048, with a default of 0. The
calling number is transformed
according to this index during
outgoing calls. This index has no
influence on the incoming calls
through this trunk

DLPFX

Whether to delete
the prefix of the
calling number
during outgoing
calls, including
NO and YES

It is an optional parameter,
with a default of NO. If YES is
selected, the prefix of the calling
number (such as 0/00) will be
deleted during outgoing calls

NAME

User alias

It is an optional parameter,
consisting of 0~50 characters.

DDI

Example: Create an outgoing route with the following requirements.

Route No.: 28

Trunk group No.: 28

User alias: Rout28.

The command is:


ADD RT:RT=28,TG=28,DDI=0,OPDDI=0,DLPFX=NO,NAM
E="ROUT28",HOPCNT=0,RERTS=0,CLISETIDX=65535;
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating a Route Set


Prerequisites

260

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The outgoing route No. is created.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Context

The MML Terminal window is opened.

Each route belongs to a route group, and each route group contains at most 12 routes.

Note:
Each outgoing route group can be configured with at most 12 outgoing routes, performing load sharing based on the poll or percentage mode. One outgoing route can be allocated to different
adjacent offices (such as TMSC1 and TMSC2), thus to implement
traffic load sharing to different offices.
Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create a route set by executing command ADD RTS.
The explanation of the main parameters in command ADD RTS
is shown in Table 101.
TABLE 101 PARAMETERS IN THE ADD RTS COMMAND
Parameter
Name

RTS

NAME

Parameter
Description

Instruction

Route group No.

It is a mandatory parameter,
which is an integer, ranging
from 1~3000. It is used to
identify a route group

User alias

It is an optional parameter,
consisting of 0~50 characters.
It is used to specifically
describe a route group to make
it easily recognized
t is an optional parameter. It
is in the format of No.-Route
No.-Load sharing proportion.
When the percentage is set to
0, the poll mode is adopted.
SEQ: No., which is the location
of the route in the route group.

RTPER

Route No. and


load sharing
proportion list

RTVAL: Route No., associated


with the route group. This
parameter must be defined
by command ADD RT at first.
Then it can be indexed here.
PERVAL: Load sharing
proportion of each route in the
route group. If it is set to 0
for all routes by default, the
load is evenly allocated to each
route

Confidential and Proprietary Information of ZTE CORPORATION

261

ZXWN MSCS Data Configuration Guide(MGCF)

Example: Create an route set with the following requirements.

Route group No.: 28

User alias: Rout28

Locaiton: 1

Route No.: 28

Percentage: 0.

The command is:


ADD RTS:RTS=28,NAME="ROUT28",RTPER="1"-"28"-"0";
END OF STEPS
Result

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Creating an Outgoing Route Chain


Prerequisites

Before the operation, it is required to confirm:

The exchange ID to be configured is given.

The outgoing route chain No. range is set in the resource management system.

The MML Terminal window is opened.

Context

Each outgoing route group belongs to an outgoing route chain, and


each route chain contains at most 4 route groups.

Steps

1. If no exchange is specified, execute command SET on the MML


Terminal window or select a NE from the system tree to specify the exchange to be configured.
Example: Select the MGCF exchange with ID as 11 from the
system tree.
SET:NEID=11;
2. Create an outgoing route chain by executing command ADD
CHAIN.
The explanation of the main parameters in command ADD
CHAIN is shown in Table 102.
TABLE 102 PARAMETERS IN THE ADD CHAIN COMMAND
Parameter
Name

CHAIN

262

Parameter Description

Instruction

Route chain No.

It is a mandatory
parameter, which is
an integer, ranging from
1 to 3000. It is used
to define an outgoing
route chain. When it is
configured in the number
analysis configuration, it

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 7 Basic Service Data Configuration

Parameter
Name

Parameter Description

Instruction
is associated to the route
chain configured here

NAME

User alias

It is an optional
parameter, consisting
of 0~50 characters. It
is used to specifically
describe a route chain to
make it easily recognized

Whether the preference


policy is supported in the
MGW, including:

PRINODE

NO: When 2B occurs,


the calls in the same
MGW are not preferred,
and routing is performed
according to other
routing policies of the
system instead.

It is an optional
parameter, with a default
of YES. It is a policy
for selecting the rouging
route

YES: When 2B occurs,


the calls in the same
MGW are preferred

RTS1

No. of route group 1,


used to set the route
group with the highest
priority in a route chain
during routing. One
route chain can be
configured with at most
4 route groups

RTS2

No. of route group 2,


used to set the route
group with the level-2
priority in a route chain
during routing. One
route chain can be
configured with at most
4 route groups

RTS3

No. of route group 3,


used to set the route
group with the level-3
priority in a route chain
during routing. One
route chain can be
configured with at most
4 route groups

RTS4

No. of route group 4,


used to set the route
group with the level-4
priority in a route chain
during routing. One
route chain can be
configured with at most
4 route groups

It is an optional
parameter. Select route
groups according to the
priority order. Select
route group 1 fist. Only
when the circuits in route
group 1 are used up
or all the circuits are
unavailable, the circuits
in route group 2 can be
selected. Only when the
circuits in route group
2 are used up or all the
circuits are unavailable,
the circuits in route
group 3 can be selected

Confidential and Proprietary Information of ZTE CORPORATION

263

ZXWN MSCS Data Configuration Guide(MGCF)

Parameter
Name

Parameter Description

Instruction

RTPLC

Route Selection Policy


Number

It is an optional
parameter. Select the
route selection policy
number configured in
ADD RTPLC command

DAS for the called


number

It is an optional
parameter. It is used
to analyze the called
number in an incoming
call. This parameter
must be defined by
command ADD DAS
at first. Then it can
be indexed here. It
needs to be set only
when Inter-MGW route
chain is set in the called
number analysis. The
default value is 0

TPDAS

Example: Create an outgoing route chain with the following


requirements.

Route chain No.: 28

User alias: RLink28

No. of Route group 1: 28

Other parameters: Adopt the default values.

The command is:


ADD
CHAIN:CHAIN=28,NAME="RLink28",PRINODE=YE
S,RTS1=28,RTS2=0,RTS3=0,RTS4=0,RTPLC=0,TPDAS
=0;
END OF STEPS
Result

264

After the command is executed, the SUCCESS result is shown in


the Execute Result column of the History Command pane.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter

Configuration Instance
Table of Contents
Overview........................................................................ 265
Local Office Data Configuration.......................................... 266
Resource Attribute Configuration ....................................... 270
Adjacent IM-MGW Office Interconnection Data Configuration ............................................................................... 271
Adjacent SCSCF Office Interconnection Data Configuration ............................................................................... 274
Basic Service Data Configuration ....................................... 276
Data Synchronization ....................................................... 277
MGCF-IM-MGW Interconnection Debugging Procedure .......... 277

Overview
Introduction

This chapter introduces the local office configuration procedure and


office interconnection data configuration procedure by taking the
example of creating a MGCF pilot office. Figure 61 shows the networking diagram.
FIGURE 61 NETWORKING DIAGRAM

Note: Real lines indicate bearer connections, while dashed lines


indicate signaling connections
The MGCF is directly connected with the CSCF/BGCF/IM-MGW
through the IP bearer. The MGCF and IM-MGW can be interconnected with the R4 CS through different signaling points.

Confidential and Proprietary Information of ZTE CORPORATION

265

ZXWN MSCS Data Configuration Guide(MGCF)

According to the networking condition shown in Figure 61, the operator is required to provide the negotiation data listed in Table
103 and Table 104.
TABLE 103 NEGOTIATION DATA INSTANCE
NE

Parameter

Attributes

Office ID

11

Signaling point type of the


local office

24-bit

SPC of the local office

3.11.1

Call prefix of the test


number

8613902099

Office ID

31

Signaling point type of the


local office

24-bit

SPC of the local office

3.31.1

Office ID

12

Signaling point type of the


local office

24-bit

SPC of the local office

3.12.1

MGCF

IM-MGW

CSCF

TABLE 104 SIGTRAN IP ADDRESS INSTANCE OF THE MC


INTERFACE
Parameter

Attributes

IP of the loop-back interface at


the MGCF side

192.168.11.11/32

IP of the SIPI interface at the


MGCF side

192.168.1.11/16

IP of the loop-back interface at


the IM-MGW side

192.168.31.31/32

IP of the SIPI interface at the


IM-MGW side

192.168.1.31/16

Local Office Data


Configuration
The procedure of the local office data configuration is as follows:

266

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 8 Configuration Instance

Steps

Operations

Local exchange configuration

Physical configuration

Capacity configuration

Version loading

Office data configuration

Local Exchange Configuration


Data Planning

Table 105 lists the parameters in the local exchange configuration.


TABLE 105 DATA PLANNING OF THE LOCAL EXCHANGE
CONFIGURATION

Command

Configuration Parameters

Configuration Description

Office ID

11

Exchange type

MSCS

User alias

MGCF11

ADD NE:ID=11,TYPE=MSCS,MESUBTYPE=NONE,NAME="MG
CF11",VENDOR="ZTE",STATE=0;

Physical Configuration
Data Planning

When the MSCS office uses only one shelf, the board layout of the
BCTC shelf is shown in Figure 62. Table 106 lists the data planning
of the physical configuration.
FIGURE 62 BOARD LAYOUT OF THE BCTC SHELF

Confidential and Proprietary Information of ZTE CORPORATION

267

ZXWN MSCS Data Configuration Guide(MGCF)

TABLE 106 DATA PLANNING OF THE PHYSICAL CONFIGURATION

Command

Board

Type

CPU

Slot
No.

Unit
No.

OMP

CENTRINO

Slots 11
and 12

Module
No.

Backup
Mode

No. 1
OMP

1+1 activ
e/standby
mode

No.2 RPU

UIMC

UIM2_GC
S_755

Slots 9
and 10

921

1+1 activ
e/standby
mode

SMP

CENTRINO

Slots 7
and 8

3, 4

1+1 activ
e/standby
mode

SIPI

SIPI_NC

Slot 3

321

No backup

SPB

SPB2_826
0_8260C4

Slot 5

521

No backup

1. Select an exchange.
SET:NEID=11;
2. Create a shelf.
ADD SHELF:RACK=1,SHELF=2,TYPE=BCTC;
3. Create UIM units
ADD UNIT:LOC="1"-"2"-"9",MODULE=1,UNIT=921,TYPE
=UIM2_GCS_755,BKMODE=ONEPLUSONE,CLK1=16383,CL
K2=16383;
4. Create modules.
ADD MODULE:LOC="1"-"2"-"7",MODULE="3",FUNC1="S
MP"&"MSCBASECMP"&"SIP",CPUTYPE=CENTRINO,BKMODE
=NO;
5. Create an SPB unit.
ADD UNIT:LOC="1"-"2"-"5",MODULE=1,UNIT=521,TYPE
=SPB2_8260_8260C4,BKMODE=NO,CLK1=16383,CLK2=16
383;
6. Create an SIPI unit.
ADD UNIT:LOC="1"-"2"-"3",MODULE=1,UNIT=321,TYPE
=SIPI_NC,BKMODE=NO,CLK1=16383,CLK2=16383;

Capacity Configuration
Data Planning

268

Table 107 lists the parameters in the capacity and load sharing
configuration.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 8 Configuration Instance

TABLE 107 DATA PLANNING OF THE CAPACITY CONFIGURATION

Command

Configuration Parameters

Configuration Description

Office capacity

Adopts the default value

Service data area

The number of destination codes


is 4096

1. Configure the MSCS office capacity.


SET MSCSCAPACITY;
For the subsequent steps, refer to Configuring the MGCF Office
Capacity.
2. Configure the service data area.
SET DATASIZE:CMODEL=AMONLY,BCBMNUM=10,DSTCD
NUM=4096;

Version Loading
After the physical configuration and capacity configuration are
completed, it is required to load the board version in order to let
the foreground board run normally. For the steps of loading the
version files, refer to Overview.

Office Data Configuration


Data Planning

Table 108 lists the parameters in the office data configuration.


TABLE 108 DATA PLANNING OF THE OFFICE DATA
CONFIGURATION

Command

Configuration Parameters

Configuration Description

Network type

Area code

25

Signaling point type of the local


office

24-bit

SPC of the local office

3.11.1

Exchange type

Local exchange/toll exchange/MGCF exchange

Signaling point type

STEP

1. Create the signaling point of the local office.


ADD OPC:NET=1,NAME="NET1",SPCFMT=TRIPLE_DEC,O
PC24="3.11.1",APPTYPE="BICC"&"ISUP"&"SCCP"&"TUP",R

Confidential and Proprietary Information of ZTE CORPORATION

269

ZXWN MSCS Data Configuration Guide(MGCF)

C="25",PREFIX="0",NETAPP=0,INFO=NONETAPP,DMIDX
=0;
2. Create the local exchange attributes.
ADD
LOFC:OFCTYPE="LOCAL"&"DOMTOLL"&"MGCF",NET
=1,SEQ=0,TCODE="1234",SPTYPE=STEP,LANG=DEFAUL
T,RESTART=YES,RSTTIME=10000,T19=68,T20=60,T21
=64;
3. Set SIP module capacity
SET SIPCAPA:SIPSOCKET=16,SIPTR=16,SIPTU=128,SIP
TUMSG=3000;
4. Create realm
ADD REALM:ID=1,REALM="zte.com";
5. Create host
ADD HOST:ID=1,HOST="host1.zte.com",IPV4="11.11.11.
1";

Resource Attribute
Configuration
Resource Planning

The instance of resource attribute configuration is shown in Table


109.
TABLE 109 RESOURCE PLANNING INSTANCE
Configuration Items

Resource
Types

Key Fields

Minimum

Maximum

Office data
configuration

Adjacent
office

Adjacent
office ID

20

Node
Topology
Config

Topology
node ID.

20

Voice Codec
Template

Template ID

10

SCTP

SCTP ID

20

ASP

ASP ID

20

AS

AS ID

20

M3UA static
route

M3UA static
route ID

Signaling
linkset

Link set No.

20

Topology
configuration

Protocol
configuration

270

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 8 Configuration Instance

Configuration Items

Resource
Types

Key Fields

Minimum

Maximum

Signaling
route

Signaling
route No.

20

Number
Analysis
Selector

Number
Analysis
Selector

300

Number
Analysis
Entrance

Number
Analysis
Entrance

50

Adjacent IM-MGW Office


Interconnection Data
Configuration
Data Planning

Table 110 lists the parameters in the adjacent-MGW-office interconnection data configuration.
TABLE 110 PARAMETERS IN THE ADJACENT MGW OFFICE
INTERCONNECTION DATA CONFIGURATION
Configuration Parameters

Configuration Description

IP of the loop-back interface at


the MGCF side

192.168.11.11/32

IP of the SIPI interface at the


MGCF side

192.168.1.11/16

IP of the loop-back interface at


the IM-MGW side

192.168.31.31/32

IP of the SIPI interface at the


IM-MGW side

192.168.1.31/16

Adjacent IM-MGW office ID

101

Adjacent IM-MGW office type

MGW

Association mode

AM_SURE (Associated)

IM-MGW topology node No.

Signaling point type of the


IM-MGW

14-bit

SPC of the IM-MGW

1.31.1

Tone coding/decoding template


No.

The coding/decoding template No.


is 1.
The ETSI coding/decoding type is
ETSI_UMTS_AMR_2.

Confidential and Proprietary Information of ZTE CORPORATION

271

ZXWN MSCS Data Configuration Guide(MGCF)

Configuration Parameters

Configuration Description
The supported coding/decoding
rates are 5.90K and 6.70K.
The activated coding/decoding
rates are 5.90K and 6.70K

Command

SCTP ID

ASP ID

AS ID

M3UA static route ID

SIO-locating-AS ID

TID analyzer index

TID command template No.

It is 1 by default

1. Create the loop-back interface.


INTERFACE LOOPBACK:PORT=1;
ADD IP ADDRESS:ADDRESS="192.168.11.11",MASK="255
.255.255.255",BROADCASTIP="255.255.255.255";
SAVE ONLINEDATA;
EXIT;
2. Create the SIPI interface address.
INTERFACE:SUBSYSTEM=0,MODULE=1,UNIT=321,SUNI
T=1,PORT=1;
ADD IP ADDRESS:ADDRESS="192.168.1.11",MASK="255.
255.255.248",BROADCASTIP="255.255.255.255";
SAVE ONLINEDATA;
EXIT;
3. Create an adjacent IM-MGW office.
ADD ADJOFC:ID=101,NAME="IM-MGW1",NET=2,OFCTYP
E=MGW,SPCFMT=TRIPLE_DEC,SPCTYPE=14,DPC="1.31.1
",RC="25",ASSOTYPE=AM_SURE,SPTYPE=SEP,SSF=NATIO
NAL STANDBY,SUBPROTTYPE=DEFAULT,TEST=YES,BAND
FLAG=YES,PRTCTYPE=CHINA,CLST=65535,INFO="CIC_P
CM",RELATEDOFC1=0;
4. Create a tone coding/decoding template.
ADD
CODECTPL:ID=1,GRPID=GRPID1,VALFG=YES,OID
=OID_ETSI,ETYPE=ETSI_UMTS_AMR_2,ACTRATE="Rate59
0"&"Rate670",SUPRATE="Rate590"&"Rate670",OM=YES;
5. Create a IM-MGW topology node.
ADD TOPO:ID=101,OFCID=101,NAME="IM-MGW101",CO
DECID=1,ETYPE=R4GW,PROTTYPE=H248,IPVER=IPV4,A
TTR="BNCAAL2"&"BNCIPRTP"&"BNCTDM",UPVER="V2",ATT
R2=NOTUNL,TRFMOD=MCINTF,UPERRCTRL=YES,DTMFTC
=NO,MGWCON=SMGWCON,AUTOFAX=YES,OOBTC=NO,B
CUID=0,SENDCAP=NO,G711TRAN=NO,BICCDTMF=TRAN

272

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 8 Configuration Instance

SPARENT,IPBCP2833=BYMGW,BICCDTMPPER=0,AOIPPR
O=PRIVATE;
6. Create the SCTP.
ADD SCTPCONN:MODULE=3,OFCID=101,PROT=M3UA,R
OLE=CLT,LOCADDR="IPv4"-"0"-"192.168.1.11",LOCPORT
=2001,REMADDR="IPv4"-"0"-"192.168.1.31",REMPORT=2
001,NAME="IM-MGW101-1",ID=1,INSTRM=16,OUTSTRM
=16,MAXRTRY=5,MAXRTO=500,MINRTO=50,INITRTO=1
00,HB=500,FIXNH=NO,SCTPMAXRTRYNUM=10,DELAYA
CK=20,MAXBURST=4,PRIMARYPATH=REMIP1,PMTU=0,B
REAKTIME=3,PDTHRESH=0,MINCWND=0,PLTIMER=1
0,MPPLTHRD=2,DPLEN=MTU,CB=200;
7. Create the ASP.
ADD ASP:ASSOCID=1,NAME="IM-MGW101-1",ID=1,ISLO
OP=NO,ISLOCK=NO;
8. Create the AS.
ADD AS:PROT=M3UA,ASPID="1",NAME="H248",ID=1,EX
ISTCTX=NO,ASTAG=CLT,ASUP="H248",ASMD=LOAD,NVA
L=1,KVAL=0;
9. Create a M3UA static route.
ADD M3UART:ID=1,ASID=1,MODE=BYTURNS,NAME="IM
-MGW101";
10. Create the SIO-locating-AS.
ADD
SIOLOCAS:ID=1,NAME="IM-MGW-H248",SIO=H24
8,OFCID=101,OPOFCID=65535,PCM=65535,RT1=1,RT2
=0;
11. Create MGCF tones in batches.
BADD STONE:TYPE=ALL;
12. Create the MGC static data.
ADD MGCSCFG:MEGACO=1,ACTTM=600,ACTCHK=ON,W
AITTM=7800,PTRYNUM=5,PTRYTM=4000,CTXLIVETM=1
200,MGACTTM=600;
13. Create the IM-MGW static data template.
ADD MGSTPL:NAME="IM-MGW101",ID=1,MEGACO=1,AC
TCHK=ON,PRTTM=10,PRT=ON,PENDTM=200,LNGTM=15
000,RTRNTM=3800,MTRNNUM=1,TRNMD=UNFIXED,CTYP
E=TEXT;
14. Create the IM-MGW static data.
ADD MGSCFG:ID=101,NAME="IM-MGW101",TPLID=1,TO
NEID=1,LANGID=1,PKGLOST=10,JIT=50,DELAY=200,M
GW=NO;
15. Create the TID analyzer.
ADD TIDANL:NAME="IM-MGW101",PREV=1,TIDPFX="TD
M",TAG=TRUNK,PCMSPR="_",IDXSPR="/",PCMPOS1=1,P
CMPOS2=0,IDXPOS1=1,IDXPOS2=0;
16. Create the TID analysis entrance.
ADD TIDENTR:ND=101,TIDENTID=1,TIDTPLID=1,NAME
="MGW101";

Confidential and Proprietary Information of ZTE CORPORATION

273

ZXWN MSCS Data Configuration Guide(MGCF)

Adjacent SCSCF Office


Interconnection Data
Configuration
Data Planning

Table 111 lists the parameters in the adjacent-SCSCF-office interconnection data configuration.
TABLE 111 PARAMETERS IN THE ADJACENT SCSCF OFFICE
INTERCONNECTION DATA CONFIGURATION

Command

Configuration Parameters

Configuration Description

IP of the virtual interface at the


MGCF side

10.1.44.77

IP of the virtual interface at the


CSCF side

10.1.33.11

Adjacent CSCF office ID

12

Adjacent CSCF office type

"LOCAL"&"DOMTOLL"&"IP"

Association mode

AM_SURE (Associated)

CSCF topology node No.

12

Signaling point type of the CSCF

24-bit

SPC of the CSCF

2.12.1

IP link No.

12

Route selector

Service group

CSCF adjacent host

12

UDP bear ID

1 (Local valid), 2 (Remote valid)

SIP signaling link ID

12

SIP route ID

12

SIP route set ID

12

1. Create an SCSCF adjacent office.


ADD ADJOFC:ID=12,NAME="SCSCF",NET=1,OFCTYPE="L
OCAL"&"DOMTOLL"&"IP",SPCFMT=TRIPLE_DEC,SPCTYPE=2
4,DPC="2.12.1",RC="25",ASSOTYPE=AM_SURE,SPTYPE
=SEP,SSF=NATIONAL,SUBPROTTYPE=DEFAULT,TEST=YE
S,BANDFLAG=YES,PRTCTYPE=CHINA,CLST=65535,INFO
="CIC_PCM",RELATEDOFC1=0;
2. Create an SCSCF topology node.

274

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 8 Configuration Instance

ADD TOPO:ID=12,OFCID=12,NAME="SCSCF",CODECID
=1,ETYPE=MSCVLR,PROTTYPE=SIP,IPVER=IPV4,ATTR
="BNCIPRTP",ATTR2=NOTUNL,TRFMOD=MCINTF,UPERRCT
RL=YES,DTMFTC=NO,MGWCON=SMGWCON,AUTOFAX=YE
S,OOBTC=NO,BCUID=0,SENDCAP=NO,G711TRAN=NO,BI
CCDTMF=TRANSPARENT,IPBCP2833=BYMGW,BICCDTMP
PER=0,AOIPPRO=PRIVATE;
3. Create a SIP office direction.
ADD SIPOFC:OFCID=12,URL=URI,BYPASS=NO,BYPASS
PCT=80,BYPASSPRD=5,BYPASSTLEN=30,BYPASSLEV=L
N,BYPASSCALLNUM=1,BTYPE=IN,OVERLAP=RINVT,CFIN
FO=HIS,PBRTFMT=EQUAL,DTMF=IN,FMT4733=97,SIPRE
L=NO,ENOPT="SIP_ESSO"&"SIP_PRECOND"&"T30"&"FCPL";
4. Create an IP link.
ADD IPLINK:OFCID=12,MODULE=3,NAME="IPLINK-12",I
D=12,LOCIP="IPv4"-"0"-"10.1.44.77",LOCPORT=5060,RE
MIP="IPv4"-"0"-"10.1.33.11",REMPORT=5060,PRO=UDP,T
CPROTO=CLT,TSTIMER=15000;
5. Create an adjacent host.
ADD ADJHOST:ID=12,HOSTNAME="SCSCF",REALM="zte.
com",SRVGRP=1;
6. Create a local valid UDP bear.
ADD UDPBR:ID=1,NAME="LOCAL",IPMODE=LOCAL_VALI
D,ADJHOST=0,IPLINK=12,DSTADDRTYPE=IPV4,DSTVPN
=0,DSTPORT=0;
Create a remote valid UDP bear.
ADD UDPBR:ID=2,NAME="REMOTE",IPMODE=REMOTE_V
ALID,ADJHOST=12,IPLINK=0,DSTADDRTYPE=IPV4,DSTV
4ADDR="10.1.33.11",DSTVPN=0,DSTPORT=5060;
7. Create SIP signaling link.
ADD SIPLNK:ID=12,NAME="SCSCFLINK",BRID=2,HBTIM
E=0,NORMALHBTIME=120,UNUSECNT=3,USECNT=3;
8. Create SIP signaling route.
ADD
2";

SIPRT:ID=12,NAME="SCSCFR",SPLC=SEQ,LNK="1

9. Create SIP signaling route set.


ADD SIPRTS:ID=12,NAME="SCSCFRS",RTPLC=SEQ,SIPR
T="12"-"100";

Confidential and Proprietary Information of ZTE CORPORATION

275

ZXWN MSCS Data Configuration Guide(MGCF)

Basic Service Data


Configuration
Call Data Configuration
Data Planning

Table 112 lists the parameters in the call data configuration.


TABLE 112 PARAMETERS IN THE CALL DATA CONFIGURATION

Command

Configuration
Parameters

Configuration Description

Number analyzer entry

1 (Local number analyzer)

DAS

Originating DAS 101

Call prefix of the test


number

8613902099

Call service type

13902099: LOL (Outgoing/Local service


of the local network)

1. Create a number analysis entrance.


ADD ENTR:ID=1,NAME="LOCAL",TYPE=LOCAL,NTYPE=CA
LLED;
2. Create a DAS.
ADD
DAS:ID=101,NAME="MSQH",NEWSRV=0,CENTR
=0,PRINET=0,SPECSRV=0,LOCAL=1,NATIONAL=0,INTE
R=0;
3. Set the default DAS template of the local office.
SET LDASTMPLT:MS=101,MSRN=201;
4. Create the called number analysis.
ADD TPDNAL:ENTR=1,DIGIT="13902099",SPECRST=0,S
PECIDX=0,CAT=LOL,RST1=1,RST2=0,RST3=0,CHAINA
L=0,RNLEN=0,MINLEN=3,MAXLEN=20,OVLYPRI=NO,R
EL=NO,NET=1,NAT=DEF,OPDDICONT=NO,TPDDICONT
=NO,OPDDI=0,TPDDI=0,OPDLYDDI=0,TPDLYDDI=0,DD
IOVERB=0,IWVIDEO=LSUP,TIMELMT=0,AUXDAS=0,A6
=0,PFXLEN=0,INSRV=INM,FAXIDX=0,AVIDX=0,DVIDX
=0,ADATAIDX=0,DDATAIDX=0,DDCPLAY=NONE,VAD=IN
VALID,CALLSERVPRILVL=INVALID,RERTS=0,INCHAIN=N
O,BICT=NO,ICT=0,ICTT=10,GNM=NORMAL,STBILL=INVA
LID,HOPDAS=0,MCA=NO,IVVR=NO,WANTL=0,IMSCENTR
=NO;

276

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 8 Configuration Instance

SIP Service Data Configuration


Data Planning

Table 113 lists the parameters in the SIP service data configuration.
TABLE 113 PARAMETERS IN THE SIP SERVICE DATA
CONFIGURATION

Command

Configuration Parameters

Configuration Description

IP distribution policy ID

V4NET

10.1.33.11

URI

scscf.zte.com

SIP method

ACK"&"BYE"&"CANCEL"&"INVITE
"&"PRACK"&"UPDATE

UDP distribution policy

Excellent choice priority

UDP bear ID

1. Create IP distribution policy.


ADD IPDPLC:ID=1,NAME="MGCF11",ADDRTYPE=IPV4,V
4NET="10.1.33.11",V4MSK="255.255.255.0",PORT=0,UPL
C=PRIROR,UDPID="1";
2. Create URI analysis.
ADD
URI:RTSEL=1,URI="scscf.zte.com",METHOD="ACK
"&"BYE"&"CANCEL"&"INVITE"&"PRACK"&"UPDATE",SIPRTS
=12;

Data Synchronization
Command

SYNA:STYPE=ALL,TIMEOUT=600,SAVE=YES,TOSLAVE=YES;

MGCF-IM-MGW
Interconnection Debugging
Procedure
After data of the IM-MGW are configured on the MGCF, the common procedures for data debugging are as follows.

Confidential and Proprietary Information of ZTE CORPORATION

277

ZXWN MSCS Data Configuration Guide(MGCF)

Steps

Operations

Description

Checking the IM-MGW office


status

Check whether the IM-MGW


office is accessible

Checking the physical


connection

When the office is


inaccessible, first confirm
whether there is any
hardware problem

Debugging the SCTP

After the hardware problem


is removed, confirm whether
there is any problem in the
SCTP association

Debugging the M3UA

After the problem in the


SCTP association is removed,
confirm whether there is
any problem in upper-layer
M3UA signaling link

Confirming the working


status of the IM-MGW

After the problem on the


M3UA layer is removed,
check the H.248 gateway
configuration

Checking the IM-MGW Office Status


Prerequisites

The IM-MGW adjacent office data configuration is completed.

Context

Check whether the office is accessible is the first step for debugging. This section introduces the detailed procedures for checking
whether the IM-MGW office is accessible.

Steps

1. On the NetNumen M30 window, select menus Views > MML


Terminal to enter the MML Terminal window.
2. If no exchange is specified, execute command SET on the MML
Terminal window or select a NE from the system tree to specify the MGCF exchange to be configured.
3. Enter the following command on the MML Terminal window,
and click Execute to query the status of the adjacent IM-MGW
office. OFC is the adjacent IM-MGW office ID.
SHOW OFCSTAT:OFC=101;

Note:
You can check whether the office is accessible, and the status
of the SIGTRAN signaling on the Dinamic management page
of the View window.
END OF STEPS
Result
Postrequisite

278

The Command Execute Result shows the M3UA Office State


is Reachable.
If the office is inaccessible, check the physical connection.

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 8 Configuration Instance

Checking the Physical Connection


Prerequisites

The IM-MGW adjacent office data configuration is completed.

Context

If it is found that the adjacent IM-MGW office is not reachable


on the NetNumen M30 window, confirm whether the physical
connection between the MGCF and the IM-MGW is normal.

Steps

1. When the MGCF is connected with the IM-MGW through HUB,


the straight network cable should be adopted. When the MGCF
is directly connected with the IM-MGW, the crossover network
cable should be adopted.
END OF STEPS

Result

The physical connection is normal when the indicators Link1 and


Link3 on the SIPI board are always on.

Debugging the SCTP


Prerequisites

Context
Steps

The IM-MGW adjacent office data configuration is completed.

The physical connection is normal between MGCF and IM-MGW.

The MML Terminal window is opened.

If the physical connection is normal, debug the SCTP.


1. On the NetNumen M30 window, select menus Views > MML
Terminal to enter the MML Terminal window.
2. If no exchange is specified, execute command SET on the MML
Terminal window or select a NE from the system tree to specify the MGCF exchange to be configured.
3. Enter the following command on the command terminal, and
click Execute to query the STCP status. ASSOCID is the association ID.
SHOW SCTPSTAT:ASSOCID=1;
END OF STEPS

Result

The Command Execute Result shows the SCTP Status is Established.

Postrequisite

If the association is not established, check whether the IP address


configuration of the port is correct.

Debugging the M3UA


Prerequisites

The IM-MGW adjacent office data configuration is completed.

The physical connection is normal between MGCF and IM-MGW.

The association between MGCF and IM-MGW is established.

Confidential and Proprietary Information of ZTE CORPORATION

279

ZXWN MSCS Data Configuration Guide(MGCF)

Context

The MML Terminal window is opened.

If the SCTP is established, debug the M3UA.


The physical status of the ASP is decided by the association status. After the association is established, the ASPs at the both ends
perform handshaking of the service status maintenance message
ASPTM. If the handshaking is successful, the service can be used.

Steps

1. On the NetNumen M30 window, select menus Views > MML


Terminal to enter the MML Terminal window.
2. If no exchange is specified, execute command SET on the MML
Terminal window or select a NE from the system tree to specify the MGCF exchange to be configured.
3. Enter the following command on the MML Terminal window,
and click Execute to query the ASP status. ASID is the AS ID,
and ASPID is the ASP ID.
SHOW ASPSTAT:ASID=1,ASPID=1;
4. Enter the following command on the MML Terminal window,
and click Execute to query the AS status. ASID is the AS ID.
SHOW ASSTAT:ASID=1;
END OF STEPS

Result

When the ASP status in active, ASP Status Active should be


displayed.

When the AS status in normal, AS Status Active should be


displayed.

Confirming the Working Status of the


IM-MGW
Context

After the office direction to the IM-MGW is debugged successfully,


the status of the IM-MGW is not guaranteed to be normal. This
section introduces the method of confirming the working status of
the IM-MGW.
After the data for connection between the MGCF and the IM-MGW
are configured and the equipment is started, the IM-MGW will
actively register the gateway information to the MGCF. This topic
describes the method of confirming the working status of the
IM-MGW.

Steps

1. On the NetNumen M30 window, select menus Views > MML


Terminal to enter the MML Terminal window.
2. If no exchange is specified, execute command SET on the MML
Terminal window or select a NE from the system tree to specify the MGCF exchange to be configured.
3. Enter the following command on the MML Terminal window,
and click Execute to query the registration status of the gateway.

280

Confidential and Proprietary Information of ZTE CORPORATION

Chapter 8 Configuration Instance

SHOW MGWSTAT;
END OF STEPS
Result

The Command Execute Result shows the MGW Status is In


Service.

Postrequisite

When the working status of the gateway is exceptional, check


whether the corresponding parameters in the H248 configuration
and the SIGTRAN configuration on the MGCF and the IM-MGW are
consistent and meet the requirements.

H.248/SCTP Problem Location


Method
For two NEs adopting SIGTRAN networking, to judge whether the
bottom-layer link is reliable, it is necessary to confirm whether
two connections are normal. One is the connection between two
SIG_IPIs, and the other is the control channel between the SIG_IPI
and the SMP.

Debugging the IP protocol stack


Debugging the connection between two SIG_IPIs means debugging the IP protocol stack. When the physical connection is
normal, connect one computer to HUB or to SIGIPI through the
crossover network cable. Ping the IP addresses of the SIPI interface and the loop-back interface of the local end, and those
of the opposite end. When the IP protocol stack is correctly
configured, these IP addresses should be pinged successfully.
If they cannot be pinged successfully, confirm whether the IP
protocol stack is correctly configured.

Debugging the basic SCTP connection information


After the protocol stack is normal, it is necessary to check data
in the SCTP configuration , including whether the protocol type,
the server and the client are normal; whether the office ID, IP
address, and port number are correct; and whether the port
number is repeated.

M3UA Problem Location Method


When the status of the lower-layer association is normal, and
the status of the AS/ASP is abnormal, it is necessary to confirm
whether AS data, ASP data, and SIO-locating-AS data are correctly configured, and whether the interconnecting parameters
between the local office and the opposite-end office are consistent.

Confidential and Proprietary Information of ZTE CORPORATION

281

ZXWN MSCS Data Configuration Guide(MGCF)

This page is intentionally blank.

282

Confidential and Proprietary Information of ZTE CORPORATION

Figure

Figure 1 IMS NETWORKING ................................................. 1


Figure 2 OVERALL FLOW OF THE MGCF DATA CONFIGURATION .. 3
Figure 3 START PROCESS OF THE OMM SERVER ..................... 5
Figure 4 START INFORMATION OF THE OMM SERVER............... 5
Figure 5 LOGIN Window ...................................................... 6
Figure 6 NETNUMEN M30 MSCS/MGW OMM SYSTEM WINDOW .. 7
Figure 7 MML Terminal Window .......................................... 8
Figure 8 MML TERMINAL Window .......................................... 9
Figure 9 COMMAND EXECUTION OPERATIONS .......................10
Figure 10 LOCAL OFFICE DATA CONFIGURATION FLOW...........14
Figure 11 PHYSICAL CONFIGURATION FLOW .........................18
Figure 12 FLOW OF LOADING VERSION FILES .......................40
Figure 13 VERSION LOADING..............................................42
Figure 14 CONFIGURING VERSION PATH ..............................42
Figure 15 Adding New Blank Entry .......................................43
Figure 16 Configuring Version Name.....................................43
Figure 17 VERSION FILE PATH.............................................44
Figure 18 Load Version .......................................................45
Figure 19 Version List.........................................................46
Figure 20 CREATING OMP BOOT FILES .................................46
Figure 21 Successful Infomation ..........................................47
Figure 22 CONNECTION DESCRIPTION .................................48
Figure 23 CONNECT TO DIALOG BOX ...................................48
Figure 24 COM1 PROPERTIES ..............................................49
Figure 25 PRESS ANY KEY TO STOP AUTO-BOOT ....................49
Figure 26 BOOT PASSWORD................................................50
Figure 27 3GPLAT BOOT .....................................................50
Figure 28 CONFIG SELECTION.............................................51
Figure 29 ENTER OMPS OMC IP ADDRESS ............................51
Figure 30 ENTER OMPS OMM MAC ADDRESS ........................52
Figure 31 ENTER OMPS GATEWAY IP ADDRESS .....................52
Figure 32 OMC SERVER IP ADDRESS ....................................53
Figure 33 CONFIG SELECTION.............................................53
Figure 34 OMM IP ADDRESS ...............................................54

Confidential and Proprietary Information of ZTE CORPORATION

283

ZXWN MSCS Data Configuration Guide(MGCF)

Figure 35 FTP CONFIG........................................................54


Figure 36 OMPCFG FILE......................................................55
Figure 37 CONFIG SELECTION.............................................55
Figure 38 OMP BOOT TYPE ..................................................56
Figure 39 CONFIG SELECTION.............................................56
Figure 40 BUREAU NO. .......................................................57
Figure 41 CONFIG SELECTION.............................................57
Figure 42 3GPLAT BOOT .....................................................58
Figure 43 USER NAME AND PASSWORD ................................61
Figure 44 STATUS..............................................................62
Figure 45 Version Mainenance .............................................63
Figure 46 Version List.........................................................64
Figure 47 BATCH VERSION LOADING BY DEFAULT ..................64
Figure 48 AREA TREE .........................................................76
Figure 49 ADDING RESOURCES ...........................................76
Figure 50 RESOURCE ADDING DIALOG BOX ..........................77
Figure 51 FLOW OF MGCF-IM-MGW INTERCONNECTION
CONFIGURATION ...............................................80
Figure 52 SIGTRAN CONFIGURATION FLOW ........................ 107
Figure 53 CONFIGURATION FLOW ...................................... 120
Figure 54 FLOW OF CONFIGURING A DIRECT-ASSOCIATED
OFFICE IN IP DOMAIN ...................................... 167
Figure 55 QUASI-ASSOCIATED NETWORKING BETWEEN
MSCS AND 2G MSC/PSTN (BASED ON M3UA) ...... 175
Figure 56 FLOW OF M3UA TRANSIT EXCHANGE ................... 176
Figure 57 QUASI-ASSOCIATED NETWORKING BETWEEN
MGCF AND 2G MSC/PSTN (BASED ON M2UA) ...... 177
Figure 58 FLOW OF M2UA TRANSIT EXCHANGE ................... 178
Figure 59 TDM OFFICE INTERCONNECTION CONFIGURATION
FLOW............................................................. 182
Figure 60 ANALYSIS ORDER OF NUMBER ANALYZERS ........... 194
Figure 61 NETWORKING DIAGRAM..................................... 265
Figure 62 BOARD LAYOUT OF THE BCTC SHELF ................... 267

284

Confidential and Proprietary Information of ZTE CORPORATION

Table

Table 1 LOGIN PARAMETER DESCRIPTION.............................. 6


Table 2 PARAMETERS IN THE SYNA COMMAND .....................11
Table 3 PARAMETERS IN THE SYN COMMAND........................11
Table 4 PARAMETERS IN THE ADD NE COMMAND ..................16
Table 5 PARAMETERS IN THE SET PCINFO COMMAND ...........17
Table 6 PARAMETERS IN THE ADD RACK COMMAND ..............20
Table 7 PARAMETERS IN THE ADD SHELF COMMAND.............21
Table 8 PARAMETERS IN THE ADD UNIT COMMAND ..............22
Table 9 PARAMETERS IN THE ADD MODULE COMMAND .........24
Table 10 MGCF BOARD TYPES .............................................25
Table 11 PARAMETER IN THE ADD UNIT COMMAND ..............27
Table 12 PARAMETERS IN THE ADD UNIT COMMAND.............28
Table 13 PARAMETERS IN THE ADD UNIT COMMAND.............30
Table 14 PARAMETERS IN THE ADD UNIT COMMAND.............31
Table 15 PARAMETERS IN THE ADD UNIT COMMAND.............32
Table 16 PARAMETER IN THE ADD SVRINF COMMAND...........34
Table 17 CAPACITY CONFIGURATION....................................34
Table 18 Office Capacity Configuration Parameters .................35
Table 19 PARAMETERS IN THE SET DATASIZE COMMAND ......38
Table 20 VERSION DESCRIPTION OF OMP BOOT FILE .............45
Table 21 PARAMETERS IN THE SET OMP COMMAND ..............59
Table 22 PARAMETERS IN THE SYNA COMMAND....................60
Table 23 Board Version Files................................................62
Table 24 BOARD INDICATOR STATUSES ................................65
Table 25 PARAMETERS IN THE BADD STONE COMMAND ........66
Table 26 Office Information Configuration .............................67
Table 27 PARAMETERS IN THE ADD OPC COMMAND ..............68
Table 28 PARAMETERS IN THE ADD LOFC COMMAND ............70
Table 29 RESOURCE TYPES, KEY FIELDS AND VALUE RANGES
OF THE MGCF....................................................74
Table 30 FLOW DESCRIPTION..............................................80
Table 31 INTERFACE IP ADDRESS CONFIGURATION................81
Table 32 PARAMETERS IN THE ADD IP ADDRESS COMMAND...82
Table 33 INTERFACE REAL INTERFACE ................................83

Confidential and Proprietary Information of ZTE CORPORATION

285

ZXWN MSCS Data Configuration Guide(MGCF)

Table 34 PARAMETERS IN THE ADD IP ADDRESS COMMAND...84


Table 35 INTERFACE VIRTUAL INTERFACE ...........................85
Table 36 PARAMETERS IN THE ADD IP ADDRESS COMMAND...86
Table 37 PARAMETERS IN THE ADD BFD AUTH COMMAND .....88
Table 38 PARAMETERS IN THE ADD BFD SESSION
COMMAND ........................................................89
Table 39 PARAMETERS IN THE ADD IP ROUTE COMMAND......91
Table 40 ADJACENT AND TOPOLOGY CONFIGURATION............92
Table 41 PARAMETERS IN THE ADD ADJOFC COMMAND ........93
Table 42 PARAMETERS IN THE ADD CODECTPL COMMAND ....98
Table 43 PARAMETERS IN THE ADD TOPO COMMAND .......... 100
Table 44 PARAMETERS IN THE ADD MGWBEARMOD
COMMAND ...................................................... 103
Table 45 PARAMETERS IN THE ADD SCTPCONN COMMAND .. 109
Table 46 PARAMETERS IN THE ADD ASP COMMAND ............ 112
Table 47 PARAMETERS IN THE ADD AS COMMAND .............. 113
Table 48 PARAMETERS IN THE ADD M3UART COMMAND...... 116
Table 49 PARAMETERS IN THE ADD SIOLOCAS COMMAND... 118
Table 50 PARAMETERS IN THE ADD MGCSCFG COMMAND.... 121
Table 51 PARAMETERS IN THE ADD MGSTPL COMMAND ...... 123
Table 52 PARAMETERS IN THE ADD MGSCFG COMMAND...... 124
Table 53 PARAMETERS IN THE ADD TIDANL COMMAND....... 126
Table 54 PARAMETERS IN THE ADD TIDENTR COMMAND..... 128
Table 55 FLOW DESCRIPTION............................................ 129
Table 56 PARAMETERS FOR CREATING A SIP ADJACENT
OFFICE .......................................................... 131
Table 57 PARAMETERS IN THE COMMAND ADD SIPOFC ....... 136
Table 58 PARAMETERS IN THE ADD TOPO COMMAND .......... 137
Table 59 PARAMETERS IN THE ADD IPLINK COMMAND ....... 143
Table 60 PARAMETERS IN THE SET SIPCAPA COMMAND...... 145
Table 61 PARAMETERS IN THE ADD REALM COMMAND ........ 146
Table 62 PARAMETERS IN THE ADD HOST COMMAND .......... 147
Table 63 PARAMETERS IN THE ADD RTSEL COMMAND ......... 148
Table 64 PARAMETERS IN THE ADD SRVG COMMAND .......... 149
Table 65 PARAMETERS IN THE ADD ADJHOST COMMAND .... 150
Table 66 PARAMETERS IN THE ADD UDPBR COMMAND........ 151
Table 67 PARAMETERS IN THE ADD SIPLNK COOMMAND..... 153
Table 68 PARAMETERS IN THE ADD SIPRT COMMAND ......... 154
Table 69 PARAMETERS IN THE ADD SIPRTS COMMAND ....... 156
Table 70 PARAMETERS IN THE ADD IPDPLC COMMAND ....... 157

286

Confidential and Proprietary Information of ZTE CORPORATION

Tables

Table 71 PARAMETERS IN THE ADD URI COMMAND............. 159


Table 72 PARAMETERS IN THE ADD TG RTP COMMAND ....... 161
Table 73 BEARER MODES OF MAIN INTERFACES .................. 165
Table 74 PARAMETERS IN THE ADD ADJOFC COMMAND ...... 168
Table 75 PARAMETERS IN THEADD TOPO COMMAND........... 173
Table 76 PARAMETERS IN THE ADD M2UAIPLNK
COMMAND ...................................................... 180
Table 77 PARAMETERS IN THE ADD N7LKS COMMAND ........ 184
Table 78 PARAMETERS IN THE ADD N7LNKE1 COMMAND .... 186
Table 79 PARAMETERS IN THE ADD N7ROUTE COMMAND.... 188
Table 80 ARRANGEMENT MODE OF SIGNALING SETS............ 189
Table 81 PARAMETERS IN THE ADD N7OFC COMMAND ........ 191
Table 82 DAS FOR PRE-ANALYZING THE CALLED NUMBER ..... 194
Table 83 ORIGINATING DAS .............................................. 195
Table 84 FORWARDING DAS.............................................. 196
Table 85 ROAMING DAS.................................................... 197
Table 86 PARAMETERS IN THE ADD ENTR COMMAND .......... 199
Table 87 ANALYZER ENTRY TYPES ...................................... 200
Table 88 COMMON DAS .................................................... 201
Table 89 PARAMETERS IN THE ADD DAS COMMAND ............ 202
Table 90 PARAMETERS IN THE SET LDASTMPLT COMMAND .. 203
Table 91 PARAMETERS IN THE ADD ACRTMPLT COMMAND .. 207
Table 92 PARAMETERS IN THE ADD TPDNAL COMMAND ...... 211
Table 93 CALL SERVICE TYPES .......................................... 225
Table 94 ENABLED OPTIONS ............................................. 232
Table 95 PARAMETERS IN THE ADD TG DT COMMAND ......... 237
Table 96 PARAMETERS IN THE ADD TG ATM COMMAND ....... 244
Table 97 PARAMETERS IN THE ADD TG RTP COMMAND ....... 250
Table 98 PARAMETERS IN THE ADD SPCM COMMAND .......... 255
Table 99 PARAMETERS IN THE ADD INPCM COMMAND ........ 257
Table 100 PARAMETERS IN THE ADD RT COMMAND............. 259
Table 101 PARAMETERS IN THE ADD RTS COMMAND........... 261
Table 102 PARAMETERS IN THE ADD CHAIN COMMAND ...... 262
Table 103 NEGOTIATION DATA INSTANCE ........................... 266
Table 104 SIGTRAN IP ADDRESS INSTANCE OF THE MC
INTERFACE ..................................................... 266
Table 105 DATA PLANNING OF THE LOCAL EXCHANGE
CONFIGURATION ............................................. 267
Table 106 DATA PLANNING OF THE PHYSICAL
CONFIGURATION ............................................. 268

Confidential and Proprietary Information of ZTE CORPORATION

287

ZXWN MSCS Data Configuration Guide(MGCF)

Table 107 DATA PLANNING OF THE CAPACITY


CONFIGURATION ............................................. 269
Table 108 DATA PLANNING OF THE OFFICE DATA
CONFIGURATION ............................................. 269
Table 109 RESOURCE PLANNING INSTANCE ........................ 270
Table 110 PARAMETERS IN THE ADJACENT MGW OFFICE
INTERCONNECTION DATA CONFIGURATION ........ 271
Table 111 PARAMETERS IN THE ADJACENT SCSCF OFFICE
INTERCONNECTION DATA CONFIGURATION ........ 274
Table 112 PARAMETERS IN THE CALL DATA CONFIGURATION .. 276
Table 113 PARAMETERS IN THE SIP SERVICE DATA
CONFIGURATION ............................................. 277

288

Confidential and Proprietary Information of ZTE CORPORATION

Index
A

MML Terminal......................4

Active/standby mode ......... 29


Active/standby
networking...................... 80
Address planning............... 80
Adjacent office .................. 81

N
Network section ................ 81

B
Background ........................2
BFD configuration .............. 80

OMM Client .........................4


OMM server ........................2

Cable connection .................2


Commissioning.................. 29
crossover network
cable ............................ 279
Crossover network
cable ............................ 281

Physical configuration ........ 18


Protocol stack ................... 79

D
Data configuration ...............4
Data Synchronization ...........4

Q
Quasi-associated ............. 177

R
Rack ..................................2

H248 configuration ............ 81


Hardware installation ...........2

SCTP configuration .......... 281


Shelf..................................2
Signaling Route ............... 179
SIGTRAN ........................ 281
SIGTRAN configuration ....... 81

I
Inter-office ....................... 29
Interconnection
data ........................... 3, 79
IP address ...................... 281
IP protocol stack ............. 281

T
Topological node................ 81
Topological node
configuration ................... 81

L
LAN ...................................2
Link ............................... 281
Load-sharing .................... 80
Load-sharing mode ............ 29
local office ...................... 281
Loop-back interface ......... 281

M
M3UA............................. 280

Confidential and Proprietary Information of ZTE CORPORATION

289

You might also like