Professional Documents
Culture Documents
Training Standard
Industrial Mechanic
(Millwright)
This document is the property of the apprentice named inside and represents the official record of his/her training
CONTENTS
PAGE
SKILL SETS
4600.0
4601.0
Communicate ........................................................................................................... 24
4602.0
4603.0
4604.0
4605.0
1
Ontario College of Trades
4606.0
4607.0
Apply Lubricants...................................................................................................... 36
4608.0
4609.0
4610.0
4611.0
4612.0
4613.0
4614.0
4615.0
4616.0
4617.0
4618.0
Apprentice Record......................................................................................................................... 63
Apprentice Completion Form........................................................................................................ 66
2
Ontario College of Trades
2.
Program Guidelines
Ratio
The Industry Committee has identified a journeyperson-to-apprentice ratio of one
journeyperson or person who is deemed to have equivalent to a journeyperson
status to one apprentice as the ratio generally necessary for an apprentice to be
properly trained on the job in this program. There may be individual
circumstances in which the ratio varies from this guideline.
3
Ontario College of Trades
3.
Program Requirements
Academic Standard
The Industry Committee has identified the minimum academic standard for entry
to this program as completion of Grade 12 or ministry-approved equivalent.
(See ACA Policy 102, Confirming Academic Requirements.)
Other Resources
Complete program requirements, policies, and standards can be obtained by
referring to the following resources:
Apprenticeship and Certification Act, 1998 (ACA)
ACA General Regulation 573/99
ACA Exemption Regulation 566/99
Program-specific Apprenticeship Training Standard or Schedules of
Training
ACA Program and Policy Manual
4
Ontario College of Trades
Academic Background
Industry has identified relevant secondary-school course(s) likely to increase an
individuals chances of success if completed before program entry. For details, see
the document Apprenticeship Subject Pathways.
5
Ontario College of Trades
SKILL SETS
PROTECT SELF
AND OTHERS
4600.0
COMMUNICATE
4601.0
USE DRAWINGS
AND
SCHEMATICS
4602.0
Practise safe
work habits
Apply machinery
and equipment
lockout and deenergizing
procedures
Comply with
established
confined space
safety procedures
Follow company
procedures for
applying first aid
4600.01
Apply fireprevention
techniques
4600.02
Perform all work
in compliance
with company
safety and
housekeeping
standards
4600.03
4600.04
4600.05
4600.06
4600.07
Communicate
with fellow
workers,
company
representatives,
and other trades
4601.01
Use engineering,
machine, and
component
drawings and
symbols
4602.01
Write maintenance
and job-specific
technical reports
4601.02
Draw or sketch
assembly and
component parts
4602.02
4602.03
6
Ontario College of Trades
Use schematics
and diagrams
4602.04
4603.0
Use fastening
tools
Use measurement
tools
4603.02
4603.03
4603.04
Apply specific
trade calculations
and formulas
Operate pedestal
or radial drilling
machines
4604.01
Perform milling
operations
4604.02
Use machine tool
accessories
4604.03
Operate
fabrication
equipment
4604.06
4604.07
4604.08
4603.01
Use impact tools
and/or powderactuated tools
Use portable
power tools
4603.05
4603.06
USE MACHINE
TOOLS
4604.0
USE PRECISION
MEASURING
EQUIPMENT
4605.0
4605.01
Use bench marks
and turning
points
Use verniers
Use precision
alignment
instruments
4605.02
4605.03
4605.06
7
Ontario College of Trades
Operate cut-off
and band saws
4604.04
Use precision
measuring devices
4605.04
Perform lathe
operations
4604.05
Use measuring
and testing
instruments and
equipment
4605.05
USE
MATERIALS
AND
FASTENERS
4606.0
4606.01
APPLY
LUBRICANTS
Identify the
characteristics
and composition
of lubricants
4607.0
4607.01
4608.0
INSTALL AND
MAINTAIN
MATERIALHANDLING
SYSTEMS
4609.0
Plan lifts
4608.01
Use non-metallic
materials
4606.02
4607.02
4608.02
Install and
maintain conveyor
components
4609.01
Install and
maintain
material-handling
valves
4609.02
Install and
maintain materialhandling piping
and duct work
4609.06
4606.03
4607.03
Inspect rigging
and hoisting
equipment
4608.03
Splice conveyor
belts
4609.03
4609.07
8
Ontario College of Trades
Install fastening
devices
4606.04
Install, maintain,
and repair
machinery and
plant lubrication
systems
4607.04
4607.05
4608.04
Inspect tracking at
idlers and pulleys
4609.04
Use manual or
power hoisting
equipment
4608.05
Inspect and
maintain overhead
cranes and hoists
and monorail
systems
4609.05
INSTALL AND
MAINTAIN
POWER
TRANSMISSION
SYSTEMS
4610.0
INSTALL AND
MAINTAIN
COMPRESSORS
4611.0
INSTALL AND
MAINTAIN
PUMPS
4612.0
INSTALL,
COMMISSION,
AND MAINTAIN
PRIME MOVERS
AND
MACHINERY
4613.0
Calculate gear
ratios,
horsepower
requirements, and
final speeds
4610.01
Install and
maintain rotary
and reciprocating
compressors
4611.01
Install and
maintain
hydrodynamic
pumps
4612.01
4610.02
4610.03
4610.04
Install and
maintain primary
filters and coolers
4611.02
Install, maintain,
and replace
hydrodynamic
pump components
4612.02
Install and
maintain
separators and
receivers
4611.03
Install, maintain,
and repair
hydrostatic pumps
4612.03
Install prime
movers
4613.01
Start up and runin prime mover
and ancillary
equipment
4613.02
Record footprint/
signature of
machinery
4613.03
Maintain and
repair prime
movers
4613.06
4613.07
4613.08
9
Ontario College of Trades
Install, maintain,
and repair
unloading,
distribution, and
lube systems
4611.04
Install and
maintain keys,
splines, bushes,
and tapered
bushings
4610.05
Install, maintain,
and inspect dryers
and coolers
4611.05
Inspect, maintain,
and replace
hydrostatic pump
components
4612.04
Secure machinery
4613.04
Conduct final
checks on prime
movers and
machinery
4613.05
WELD, BRAZE,
AND SOLDER
4614.0
Prepare for
welding
4614.02
4614.03
Install and
maintain plain
and journal
bearings
Install and
maintain bearing
housings
Install and
maintain bearings
4615.01
Apply chemical
sealants
4615.02
Install and remove
packing
4614.01
Heat-treat and
stress-relieve
metal and alloys
Apply welding
symbols and
instructions
4614.04
Fabricate
materials
4614.05
4614.06
INSTALL AND
MAINTAIN
BEARINGS,
SEALS, AND
PACKING
4615.0
INSTALL AND
MAINTAIN
FANS AND
BLOWERS
4616.0
Inspect bearings
4615.03
4615.04
4615.06
4615.07
Install and
maintain singleand multi-stage
fan and blower
systems
Maintain and
troubleshoot
single- and multistage fan and
blower
components
Troubleshoot and
balance airflow in
the system
Troubleshoot,
inspect and
replace worn or
defective controls
4616.01
4616.02
4616.03
4616.04
10
Ontario College of Trades
Install static,
dynamic, and
rotary seals
4615.05
INSTALL AND
MAINTAIN
FLUID POWER
SYSTEMS
4617.0
Apply fluid
power formulas
and principles
Install and
maintain control
valves
Install and
maintain
regulators
4617.01
Install and
maintain filters,
strainers, and
related
contaminationcontrol
equipment
4617.06
Troubleshoot
fluid power
systems
4617.02
Lay out, install,
and maintain fluid
conductors
4617.03
Install and
maintain linear
and rotary
actuators
4617.04
Set up and adjust
variable
proportional
control valves
4617.05
Set up, maintain,
and adjust logic
servo-proportional
control systems
4617.08
4617.09
4617.07
4617.10
4617.11
PERFORM
PREVENTIVE
AND
PREDICTIVE
MAINTENANCE
4618.0
4618.02
4618.03
11
Ontario College of Trades
4618.04
PREFACE
This Training Standard was developed by the Program Development Unit of the Ministry of
Training, Colleges, and Universities (MTCU), in partnership with the Industry Advisory
Committee and in consultation with representatives from the industry. This document is intended
to be used by the apprentice, supervisor/trainer, and sponsor/employer as a blueprint for
training and as a prerequisite for completion and certification.
This training document becomes the apprentices only record of workplace training performance.
The supervisor/trainer and apprentice are required to sign off on and date the skills following
each successful acquisition, unless a skill is marked shaded (optional).
The care and maintenance of this training document are the joint responsibility of the
apprentice and the sponsor/employer. By signing off on the skill, the supervisor/trainer and
the apprentice are indicating that the apprentice has demonstrated competency in the skill.
This Training Standard has been developed specifically for documenting the apprentices
acquisition of skills of the trade.
Please Note: Apprenticeship Training and Curriculum Standards were developed by the Ministry of
Training, Colleges and Universities (MTCU). As of April 8th, 2013, the Ontario College of Trades
(College) has become responsible for the development and maintenance of these standards. The
College is carrying over existing standards without any changes.
However, because the Apprenticeship Training and Curriculum Standards documents were
developed under either the Trades Qualification and Apprenticeship Act (TQAA) or the
Apprenticeship and Certification Act, 1998 (ACA), the definitions contained in these documents may
no longer be accurate and may not be reflective of the Ontario College of Trades and Apprenticeship
Act, 2009 (OCTAA) as the new trades legislation in the province. The College will update these
definitions in the future.
Meanwhile, please refer to the Colleges website (http://www.collegeoftrades.ca) for the most
accurate and up-to-date information about the College. For information on OCTAA and its
regulations, please visit: http://www.collegeoftrades.ca/about/legislation-and-regulations
12
Ontario College of Trades
DEFINITIONS
ACA
Apprenticeship and Certification Act, 1998
Certificate of Apprenticeship (C of A)
Certification issued to individuals who have demonstrated that they have completed an
apprenticeship in Ontario
Certificate of Qualification (C of Q)
Certification issued to C of Q applicants who have achieved a passing grade on the certification
exam for their trade
Competency Analysis Profile
A document that identifies the training needs of an individual trade and details the skills/skill sets
that must be demonstrated
Competency
The ability of an individual to perform a skill repeatedly and without assistance in the workplace
to the standard set out in the Training Standard or Schedule of Training
General Performance Objective (On-the-Job Skill Set)
Describes a set of skills that includes all performance objectives under that skill set
Industry Committee (IC) Under the ACA and Provincial Advisory Committee (PAC)
Under the TQAA
Under the ACA and TQAA, the Minister may appoint a provincial committee in any trade or
group of trades to advise the Minister in matters relating to the establishment and operation of
apprenticeship training programs and trades qualifications
Journeyperson or Equivalent
A person who has acquired the knowledge and skills in a trade, occupation, or craft as attested to
by a provincial or territorial authority
Mandatory
Status assigned to unshaded individual skills, skill sets, or general performance objectives that
must be signed off on to demonstrate that the apprentice has completed the program
Optional
Status assigned to shaded individual skills, skills sets, or general performance objectives for
which sign-off is not required for the apprentice to complete the program but that may be tested
on an examination for certification
13
Ontario College of Trades
Sign-Off
Signature of the sponsor/employer of record or an individual to whom that sponsor or employer
has delegated signing authority, indicating an apprentices achievement of competency
Skill
Individual skill described in the Training Standard (note: does not mean the larger skill groups
referred to in the Training Standard as Skill Sets, Training Units, or General Performance
Objective, but the individual skills that make up those groups)
Skill Sets
Group of individual skills found in the Training Standard (may also be called Training Unit or
General Performance Objective)
Skill Set Completion Form
Lists all skill sets and includes space for sign-off by sponsor/employer of record.
Sponsor/Employer
A person who has entered into a registered training agreement under which the person is required
to ensure that an individual is provided with workplace-based training in a trade, other
occupation, or skill set as part of an apprenticeship program approved by the Director
Sponsor/Employer of Record
Refers to the sponsor or employer documented as the signatory to the current training agreement
or contract. For sponsors/employers to be considered for the training of apprentices, they must
identify that the workplace has qualified journeypersons or equivalent on site and can identify
that the workplace has the tools, equipment, materials, and processes that have been identified by
Provincial Advisory Committees (PACs) or Industry Committees (ICs) as being required for the
trade.
Supervisor
An individual who oversees the execution of a task or the work of others.
Trainer
A qualified trainer in a compulsory trade is a journeyperson with a Certificate of Qualification or
in a voluntary trade is an individual who is considered equivalent to a journeyperson with a
Certificate of Qualification.
TQAA
Trades Qualification and Apprenticeship Act
Training Standard
A document that has been written in concise statements that describe how well an apprentice
must perform each skill in order to become competent. By using the document, trainers will be
able to ensure that the apprentice is developing skills detailed for the occupation.
14
Ontario College of Trades
IMPORTANT DIRECTIONS
For the Apprentice
1.
All complete skills or skill sets must be signed and dated by both the apprentice and the
sponsor/employer when either all terms of the contract have been completed or the
apprentice leaves the employ of the employer.
2.
3.
The Skill Set Completion Form must be completed and signed by the current
sponsor/employer and presented to the local Apprenticeship Office at the fulfilment of all
terms of a Contract of Apprenticeship/Training Agreement.
4.
The Apprentice Completion Form with the Completed and Authorized Training Standard
must be presented to the local Apprenticeship Unit.
15
Ontario College of Trades
16
Ontario College of Trades
17
Ontario College of Trades
Supervisor/Trainer
$
$
$
$
$
$
$
$
18
Ontario College of Trades
TITLE
4600.0
4601.0
COMMUNICATE
4602.0
4603.0
4604.0
4605.0
4606.0
4607.0
APPLY LUBRICANTS
4608.0
4609.0
4610.0
4611.0
4612.0
4613.0
4614.0
4615.0
4616.0
4617.0
4618.0
19
Ontario College of Trades
SIGNING
AUTHORITY
Shaded performance objectives and skill sets are optional. The shaded skills do not have
to be demonstrated or signed off on for completion of the on-the-job component of the
apprenticeship.
The in-school curriculum learning outcomes will cover all the skill sets, both shaded and
unshaded.
The Certificate of Qualification examination will test the whole of the trade and may test
both shaded and unshaded performance skill sets.
20
Ontario College of Trades
4600.0
PERFORMANCE OBJECTIVES
SKILLS
4600.01
________________
Date Completed
4600.02
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
21
Ontario College of Trades
__________________
Supervisor/Trainer
4600.0
4600.03
________________
Date Completed
4600.04
_______________
Apprentice
__________________
Supervisor/Trainer
Follow company procedures for applying first aid to self and others, and seek
immediate assistance in emergency situations, in accordance with government
regulations and company policy.
________________
Date Completed
4600.06
__________________
Supervisor/Trainer
Comply with established confined space safety procedures, such as the use of
breathing apparatus, before commencing and during work, in accordance with
government regulations and company policy.
________________
Date Completed
4600.05
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Apply fire-prevention techniques by assessing the potential for fire posed by the
work performed and obtaining the required fire-prevention and firefighting
equipment, in accordance with government regulations and company policy.
________________
Date Completed
_______________
Apprentice
22
Ontario College of Trades
__________________
Supervisor/Trainer
4600.0
4600.07
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
23
Ontario College of Trades
4601.0
COMMUNICATE
GENERAL PERFORMANCE OBJECTIVE
Communicate in the workplace by liaising and communicating with fellow
workers, company representatives, and other trades; and writing overall
maintenance and job-specific technical reports.
PERFORMANCE OBJECTIVES
SKILLS
4601.01
4601.02
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
24
Ontario College of Trades
4602.0
PERFORMANCE OBJECTIVES
SKILLS
4602.01
________________
Date Completed
4602.02
__________________
Supervisor/Trainer
________________
Date Completed
4602.03
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
25
Ontario College of Trades
__________________
Supervisor/Trainer
4602.0
4602.04
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
26
Ontario College of Trades
4603.0
PERFORMANCE OBJECTIVES
SKILLS
4603.01
Use fastening tools such as sockets, spanners, wrenches, torque multipliers, and
manual and/or hydraulic torque wrenches, in installing, maintaining, and repairing
machinery; by adhering to established bolt-tightening sequences, and maintain
them at a functional condition in accordance with manufacturers specifications,
torque and tensioning charts, and company policy.
________________
Date Completed
4603.02
__________________
Supervisor/Trainer
Use hand tools such as screwdrivers, chisels, hammers, punches, pliers, levers,
scrapers, and pry bars, in a safe and efficient manner when installing, maintaining,
and repairing machinery, and maintain them at a functional condition in
accordance with manufacturers specifications and company policy.
________________
Date Completed
4603.03
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Use metal cutting tools such as files, hand saws, drills, power sanders and
chippers, reamers, taps, tapping chucks, dies, and snips, to manufacture and shape
components, and maintain them at a functional condition in accordance with
manufacturers specifications and company policy.
________________
Date Completed
_______________
Apprentice
27
Ontario College of Trades
__________________
Supervisor/Trainer
4603.0
4603.04
Use measurement tools such as tapes, rules, plumb bobs, and squares when
measuring and aligning components, and maintain them at a functional condition
in accordance with manufacturers specifications and company policy.
________________
Date Completed
4603.05
__________________
Supervisor/Trainer
Use portable power tools such as shears, magnetic base drills, grinders, and hand
millers, and maintain them at a functional condition in accordance with
manufacturers specifications and company policy.
________________
Date Completed
4603.06
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Use impact tools and/or powder-actuated tools safely and efficiently, and
maintain them at a functional condition in accordance with manufacturers
specifications, company policy and government legislation.
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
28
Ontario College of Trades
4604.0
PERFORMANCE OBJECTIVES
SKILLS
4604.01
Use feed, speed, thread cutting, and drill and tap chart information and
specifications to set machine tool controls for a variety of machine tool
operations, and calculate and apply imperial/metric conversions as required.
________________
Date Completed
4604.02
_______________
Apprentice
__________________
Supervisor/Trainer
Apply specific trade calculations and formulas when machining, fitting, setting
up, laying out, aligning, and establishing gear ratios, ensuring compliance with
engineering drawings and manufacturers specifications.
________________
Date Completed
_______________
Apprentice
29
Ontario College of Trades
__________________
Supervisor/Trainer
4604.0
4604.03
________________
Date Completed
4604.04
_______________
Apprentice
__________________
Supervisor/Trainer
4604.06
__________________
Supervisor/Trainer
Operate cut-off and band saws using material-specific blades, feeds, speeds, and
coolants, by setting up and using band saws in accordance with drawing
specifications and company policy.
________________
Date Completed
4604.05
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
_______________
Apprentice
30
Ontario College of Trades
__________________
Supervisor/Trainer
4604.0
4604.07
Use machine tool accessories, such as dividing heads, taper turning attachments,
three- and four-jaw chucks, magnetic chucks, faceplates, surface grinders, wheel
dressing attachments, and drill and tool sharpening attachments, by setting them
up and operating them in accordance with drawing specifications and company
policy.
________________
Date Completed
4604.08
_______________
Apprentice
__________________
Supervisor/Trainer
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
31
Ontario College of Trades
4605.0
PERFORMANCE OBJECTIVES
SKILLS
4605.01
________________
Date Completed
4605.02
__________________
Supervisor/Trainer
________________
Date Completed
4605.03
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Use precision alignment instruments, such as laser, dial indicators, and precision
and optical levels, to align machinery and component couplings to prescribed
tolerances.
________________
Date Completed
_______________
Apprentice
32
Ontario College of Trades
__________________
Supervisor/Trainer
4605.0
4605.04
Use precision measuring devices, such as V-blocks, gauge blocks, and surface
and angle plates, for laying out, solving angles, verifying accuracy, and comparing
and transferring measurements according to industry standards.
________________
Date Completed
4605.05
__________________
Supervisor/Trainer
________________
Date Completed
4605.06
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Use bench marks and turning points when using rods, tapes, and precision
scales, applying transits for transferring lines and turning angles, such as
horizontal and vertical, to industry specifications in degrees, minutes, and
seconds.
________________
Date Completed
_______________ __________________
Apprentice
Supervisor/Trainer
_______________________________
Sponsor/Employer Name
_____________________________
Sponsor/Employer Signature
33
Ontario College of Trades
4606.0
PERFORMANCE OBJECTIVES
SKILLS
4606.01
4606.02
__________________
Supervisor/Trainer
4606.03
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Apply the screw thread system by selecting from Unified, American, National,
Acme, Metric, and Pipe thread systems; single or multi start; and left or right
hand, in accordance with manufacturers specifications.
________________
Date Completed
_______________
Apprentice
34
Ontario College of Trades
__________________
Supervisor/Trainer
4606.0
4606.04
Install fastening devices, such as bolts, nuts, screws, dowels, rivets, circlips, and
chemical fasteners, in accordance with manufacturers specifications, drawings,
and company policy.
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
35
Ontario College of Trades
4607.0
APPLY LUBRICANTS
GENERAL PERFORMANCE OBJECTIVE
Apply lubricants and greases for specific applications by identifying the
characteristics and composition of various lubricants; selecting and using specific
oils and greases; identifying, selecting, and using special-purpose lubricants;
installing, maintaining, and repairing machinery and plant lubrication systems; and
handling and storing all lubricants and greases in accordance with manufacturers
specifications and industry standards.
PERFORMANCE OBJECTIVES
SKILLS
4607.01
________________
Date Completed
4607.02
__________________
Supervisor/Trainer
Apply oils and greases to reduce friction and wear, cool moving parts, prevent
corrosion, and seal out dirt and other contaminants, in accordance with
manufacturers specifications.
________________
Date Completed
4607.03
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
36
Ontario College of Trades
__________________
Supervisor/Trainer
4607.0
4607.04
Install, maintain, and repair machinery and plant lubrication systems, such as
pumps, flow indicators, spray valves, and metering and dispensing equipment, and
lay out all piping and fittings, in accordance with drawings and manufacturers
specifications.
________________
Date Completed
4607.05
_______________
Apprentice
__________________
Supervisor/Trainer
Handle and store all lubricants and greases in compliance with safety and
environmental legislation and according to company policy.
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
37
Ontario College of Trades
4608.0
PERFORMANCE OBJECTIVES
SKILLS
4608.01
Plan lifts by assessing load characteristics, such as size and shape, determining
load weight and centre of gravity, and removing obstacles and dangers when using
load charts in accordance with government regulations, rigging manuals,
manufacturers specifications, and company policy.
________________
Date Completed
4608.02
__________________
Supervisor/Trainer
Use rigging and hoisting equipment, such as ropes (fibre and wire), slings,
thimbles, shackles, spreader bars, chains, hooks, hoists, rope blocks, winches, and
jacks, by selecting appropriate equipment and applying it in accordance with
government regulations, rigging manuals, manufacturers specifications, and
company policy.
________________
Date Completed
4608.03
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
38
Ontario College of Trades
__________________
Supervisor/Trainer
4608.0
4608.04
Use standard hand signals and/or radio signal procedures to convey directions
and instructions to co-workers and equipment operators, ensuring that rigging and
hoisting operations are performed safely in accordance with safety regulations.
________________
Date Completed
4608.05
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
39
Ontario College of Trades
4609.0
PERFORMANCE OBJECTIVES
SKILLS
4609.01
Install, align, and maintain conveyor systems, such as belt, roller, bucket, chain,
chutes, screens, screw, and air conveyors, to ensure installation and maintenance
are in accordance with manufacturers specifications and company policy.
________________
Date Completed
4609.02
__________________
Supervisor/Trainer
________________
Date Completed
4609.03
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Splice conveyor belts using such methods as metal fasteners, plate and button
fasteners, two plate fasteners, and vulcanisation, in accordance with
manufacturers specifications and company policy.
________________
Date Completed
_______________
Apprentice
40
Ontario College of Trades
__________________
Supervisor/Trainer
4609.0
4609.04
Inspect tracking at idlers and pulleys after splicing or installation, and adjust in
accordance with manufacturers specifications.
________________
Date Completed
4609.05
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
4609.07
__________________
Supervisor/Trainer
Inspect and maintain overhead cranes and hoists and monorail systems by
checking wheels, trolley system, alignment, and tracking; by inspecting hooks,
sheaves, wire rope, chains, and brakes; and by load testing and recording data, in
accordance with safety legislation and company policy.
________________
Date Completed
4609.06
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Install and maintain material-handling piping and duct work, such as flanges,
couplings, clamps, and hangers, in accordance with manufacturers specifications
and company policy.
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
41
Ontario College of Trades
4610.0
PERFORMANCE OBJECTIVES
SKILLS
4610.01
________________
Date Completed
4610.02
__________________
Supervisor/Trainer
Install, align, and maintain power transmission belts including flat and timing
belts, V-belts, pulleys, and chains, by calculating belt and chain tension, and by
checking and adjusting alignment after installation, in accordance with
manufacturers specifications.
________________
Date Completed
4610.03
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
42
Ontario College of Trades
__________________
Supervisor/Trainer
4610.0
4610.04
Install, align, and maintain couplings, such as mechanical, magnetic, fluid, and
centrifugal, using specialized tools to ensure installation and operation are in
accordance with manufacturers specifications.
________________
Date Completed
4610.05
_______________
Apprentice
__________________
Supervisor/Trainer
Install and maintain keys, splines, bushes, and tapered bushings using
conventional and specialized tools (i.e. broaches, pullers) in accordance with
manufacturers specifications.
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
43
Ontario College of Trades
4611.0
PERFORMANCE OBJECTIVES
SKILLS
4611.01
4611.02
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
44
Ontario College of Trades
__________________
Supervisor/Trainer
4611.0
4611.03
________________
Date Completed
4611.04
__________________
Supervisor/Trainer
________________
Date Completed
4611.05
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Install, maintain, and inspect dryers and coolers by conducting leak tests,
purging and recharging systems, setting up pressure regulators, troubleshooting
using gauges, and caring for and storing liquids and gases, in accordance with
government regulations, manufacturers specifications, and company policy.
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
45
Ontario College of Trades
4612.0
PERFORMANCE OBJECTIVES
SKILLS
4612.01
Install and maintain hydrodynamic pumps, such as axial flow, centrifugal, and
mixed-flow pumps, by inspecting, replacing, and repairing pumps, in accordance
with manufacturers specifications.
________________
Date Completed
4612.02
__________________
Supervisor/Trainer
________________
Date Completed
4612.03
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Install, maintain, and repair hydrostatic pumps, such as gear, vane, piston,
diaphragm, and screw, by inspecting, maintaining, or replacing, in accordance
with manufacturers specifications.
________________
Date Completed
_______________
Apprentice
46
Ontario College of Trades
__________________
Supervisor/Trainer
4612.0
4612.04
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
47
Ontario College of Trades
4613.0
PERFORMANCE OBJECTIVES
SKILLS
4613.01
Lay out and prepare base or foundation by locating centre and datum lines,
reference points, and benchmarks; selecting and installing chemical and expanding
anchors; and rechecking base or foundation dimensions and bolt locations,
ensuring they are in accordance with drawings, plans, job specification, and
company policy.
________________
Date Completed
4613.02
_______________
Apprentice
__________________
Supervisor/Trainer
Install prime movers by using safe rigging and moving procedures to position on
base; ensuring base and feet are free from dirt and burrs; maintaining coupling gap
as per specifications; and checking component alignment, in accordance with
manufacturers specifications, engineered drawings and company policy.
________________
Date Completed
_______________
Apprentice
48
Ontario College of Trades
__________________
Supervisor/Trainer
4613.0
4613.03
Level and align machinery by checking for soft foot using such methods as
computer, laser, optical, reverse dial, or piano wire alignment methods; checking
and adjusting pipe strain by allowing for thermal growth; and levelling base or
components using shims, jacks, bolts, wedges, pads, and hydraulic jacks, in
accordance with manufacturers specifications, engineered drawings and company
policy.
________________
Date Completed
4613.04
_______________
Apprentice
__________________
Supervisor/Trainer
Conduct final checks on prime movers and machinery by checking that all
service lines are clear; inspecting and adjusting auxiliary oil systems and cooling
water to ensure proper operation; detecting and repairing leaks; ensuring that
safety devices, relief valves, and lockouts are installed and operating properly; and
blowing down and priming the system, in accordance with manufacturers
specifications.
________________
Date Completed
4613.06
__________________
Supervisor/Trainer
Secure machinery using anchors, bolts, fasteners, grouting, and epoxy resins, in
accordance with manufacturers specifications.
________________
Date Completed
4613.05
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
49
Ontario College of Trades
__________________
Supervisor/Trainer
4613.0
4613.07
________________
Date Completed
4613.08
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
50
Ontario College of Trades
4614.0
PERFORMANCE OBJECTIVES
SKILLS
4614.01
Prepare for welding by cleaning, grinding and preparing ferrous and non-ferrous
materials and selecting the appropriate welding process for the metal type, so that
the material to be welded is prepared in accordance with appropriate welding
standards and procedure specifications.
________________
Date Completed
4614.02
__________________
Supervisor/Trainer
Set up and operate electric arc welding equipment, such as shielded metal arc
welding (SMAW), Gas Metal Arc Welding (GMAW) [MIG], and Gas Tungsten
Arc Welding (GTAW) [TIG] types, by assembling consumables, machines and
associated equipment, ensuring it is in operating order setting up equipment and
welding materials in position to produce welds that will pass visual inspection.
________________
Date Completed
4614.03
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Set up and operate gas welding, coating and cutting equipment, such as that
for gas fusion welding, spray welding, and oxyacetylene and plasma cutting to
produce clean cuts free from slag and heat distortion, and to complete welding,
brazing, and soldering operations to pass visual inspection.
________________
Date Completed
_______________
Apprentice
51
Ontario College of Trades
__________________
Supervisor/Trainer
4614.0
4614.04
Apply welding symbols and instructions, for welding and fabricating using
drawings and weld specifications so that welds are carried out in accordance with
appropriate specifications.
________________
Date Completed
4614.05
__________________
Supervisor/Trainer
Fabricate materials by laying out and assembling components, and tacking them
in place so that weld distortion is minimized during welding operation.
________________
Date Completed
4614.06
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Heat-treat and stress-relieve metal and alloys using furnace, flame and oven, and
observing colour changes, using colour charts, and using air, oil, and water-cooling
medium for specific application, in accordance with manufacturers specifications,
drawings, and company policy.
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
52
Ontario College of Trades
4615.0
PERFORMANCE OBJECTIVES
SKILLS
4615.01
Install and maintain plain and journal bearings, such as sleeve, radial, linear,
and axial, by such methods as bluing, scraping, and machining to fit clearances
and tolerances, in accordance with manufacturers specifications.
________________
Date Completed
4615.02
__________________
Supervisor/Trainer
________________
Date Completed
4615.03
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Install and maintain bearings, such as anti-friction, radial, axial, ball, roller,
taper, spherical, self aligning, linear, needle, and split bearings, using such
equipment as bearing ovens, induction heaters, demag units, hot oil baths, arbour
presses, pullers, and hydraulic jack sets, in accordance with manufacturers
specifications.
________________
Date Completed
_______________
Apprentice
53
Ontario College of Trades
__________________
Supervisor/Trainer
4615.0
4615.04
Inspect bearings by checking for wear and clearances and other defects, such as
spalling, brinnelling, scoring, and cracking, in accordance with manufacturers
specifications and company policy.
________________
Date Completed
4615.05
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
4615.07
__________________
Supervisor/Trainer
Install static, dynamic, and rotary seals, such as gaskets, O-rings, labyrinth
seals, magnetic bearing housing seals, mechanical seals, and dry gas seals, in
accordance with manufacturers specifications.
________________
Date Completed
4615.06
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
Install and remove packing for specific applications by measuring and cutting
packing as required, and install safely without damage to other components, in
accordance with manufacturers specifications.
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
54
Ontario College of Trades
4616.0
PERFORMANCE OBJECTIVES
SKILLS
4616.01
Install and maintain single- and multi-stage fan and blower systems, such as
axial, centrifugal, and propeller types, for ventilation, material handling, wet and
dry dust collection, induced forced and balanced draft, and cooling tower
applications, ensuring correct driver and alignment installation to prescribed
standards and drawings.
________________
Date Completed
4616.02
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
55
Ontario College of Trades
__________________
Supervisor/Trainer
4616.0
4616.03
Troubleshoot and balance airflow in the system by using capacity and demand
factors and such methods as visual inspection, airflow indicators, and vibration
analysis, in accordance with manufacturers specifications and government
regulations.
________________
Date Completed
4616.04
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
56
Ontario College of Trades
4617.0
PERFORMANCE OBJECTIVES
SKILLS
4617.01
Apply fluid power formulas and principles, such as force, weight, mass,
friction, flow rate, pressure, and energy, using Boyles, Charless, and Pascals
laws, and Bernoullis principle, during installation and maintenance procedures of
fluid power systems in accordance with accepted scientific principles.
________________
Date Completed
4617.02
_______________
Apprentice
__________________
Supervisor/Trainer
Install and maintain control valves, such as spool or poppet types for pressure
control operations and sequence or unloading operations, and directional valves,
including sliding spool, poppet, or rotary types, by using and applying proper port
configurations and varied controls, which may include manual, mechanical,
electrical, and pilot; installing flow control valves in the proper location; metering
in and out; and compensating for pressure and temperature variations, in
accordance with manufacturers specifications.
________________
Date Completed
_______________
Apprentice
57
Ontario College of Trades
__________________
Supervisor/Trainer
4617.0
4617.03
________________
Date Completed
4617.04
_______________
Apprentice
__________________
Supervisor/Trainer
Install, start up, maintain, and repair power units and associated fluid power
circuitry, including accumulators, ensuring air/oil is bled from the system, in
accordance with manufacturers specifications and company policy.
________________
Date Completed
4617.06
__________________
Supervisor/Trainer
Select and replace fluids, such as petroleum based, fire resistant, and synthetic,
for specific applications, by inspecting and replacing fluid when required, in
accordance with manufacturers recommendations and company policy.
________________
Date Completed
4617.05
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
58
Ontario College of Trades
__________________
Supervisor/Trainer
4617.0
4617.07
Lay out, install, and maintain fluid conductors, such as piping, tubing, hosing,
fittings, brackets, expansion joints, and insulation, by inspecting and replacing
worn or defective components to ensure an efficient, leak proof and clean fluidpower system, in accordance with manufacturers specifications and company
policy.
________________
Date Completed
4617.08
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
4617.10
__________________
Supervisor/Trainer
Install and maintain linear and rotary actuators, such as single- and doubleacting, single- and double-rod types, seals and packing, cup seals and O-rings,
piston motors, vane motors, gear motors, lobe, and diaphragm, in accordance with
manufacturers specifications and company policy.
________________
Date Completed
4617.09
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
59
Ontario College of Trades
__________________
Supervisor/Trainer
4617.0
4617.11
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
60
Ontario College of Trades
4618.0
PERFORMANCE OBJECTIVES
SKILLS
4618.01
Use and maintain fixed and portable vibration and balancing equipment by
reading and interpreting monitors for velocity, frequency, and amplitude, and
establishing and recording footprint/signature of machinery.
________________
Date Completed
4618.02
__________________
Supervisor/Trainer
Select and use various types of non-destructive test equipment, such as dye
penetrant, magnaflux, ultrasonic, fluoroscopic, and used oil analysis, in
accordance with manufacturers specifications and government regulations.
________________
Date Completed
4618.03
_______________
Apprentice
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
61
Ontario College of Trades
__________________
Supervisor/Trainer
4618.0
4618.04
________________
Date Completed
4618.05
_______________
Apprentice
__________________
Supervisor/Trainer
________________
Date Completed
_______________
Apprentice
_______________________________
Sponsor/Employer Name
__________________
Supervisor/Trainer
_____________________________
Sponsor/Employer Signature
62
Ontario College of Trades
APPRENTICE RECORD
SPONSOR/EMPLOYER INFORMATION
Training Agreement #
Name
Address
Telephone
E-mail Address
SUMMARY OF TRAINING
Employment Start Date
Employment End Date
Total hours of training and
instruction between dates
of employment
________________
Date Completed
_______________
Apprentice
63
Ontario College of Trades
__________________
Supervisor/Trainer
APPRENTICE RECORD
SPONSOR/EMPLOYER INFORMATION
Training Agreement #
Name
Address
Telephone
E-mail Address
SUMMARY OF TRAINING
Employment Start Date
Employment End Date
Total hours of training and
instruction between dates
of employment
________________
Date Completed
_______________
Apprentice
64
Ontario College of Trades
__________________
Supervisor/Trainer
APPRENTICE RECORD
SPONSOR/EMPLOYER INFORMATION
Training Agreement #
Name
Address
Telephone
E-mail Address
SUMMARY OF TRAINING
Employment Start Date
Employment End Date
Total hours of training and
instruction between dates
of employment
________________
Date Completed
_______________
Apprentice
65
Ontario College of Trades
__________________
Supervisor/Trainer
Skill Sets when completed should be signed by the supervisor/trainer and presented with this
completion form to your local Apprenticeship Client Services Office. Any supporting
documentation should also be attached.
In-School Completed
(Proof to Be Provided)
Hours Completed as
per Contract:
Yes ( )
No ( )
Not applicable ( )
Yes ( )
No ( )
Not applicable ( )
SPONSOR/EMPLOYER INFORMATION
Name
Address
Telephone
E-mail Address
Signature of
Signing Authority
You will be required to disclose this signed form to the Ministry of Training, Colleges and Universities in order to complete your program. The
Ministry will use your personal information to administer and finance Ontarios apprenticeship training system.
For further information please see the notice/declaration for collection of personal information that is referenced in the table of contents of this
training standard.
66
Ontario College of Trades