Professional Documents
Culture Documents
DATA SHEET
For a complete data sheet, please also download:
74HC/HCT21
Dual 4-input AND gate
Product specification December 1990
File under Integrated Circuits, IC06
Philips Semiconductors Product specification
TYPICAL
SYMBOL PARAMETER CONDITIONS UNIT
HC HCT
tPHL/ tPLH propagation delay nA, nB, nC, nD to nY CL = 15 pF; VCC = 5 V 10 12 ns
CI input capacitance 3.5 3.5 pF
CPD power dissipation capacitance per package notes 1 and 2 15 16 pF
Notes
1. CPD is used to determine the dynamic power dissipation (PD in µW):
PD = CPD × VCC2 × fi + ∑ (CL × VCC2 × fO) where:
fi = input frequency in MHz
fo = output frequency in MHz
CL = output load capacitance in pF
VCC = supply voltage in V
∑ (CL × VCC2 × fo) = sum of outputs
2. For HC the condition is VI = GND to VCC
For HCT the condition is VI = GND to VCC − 1.5 V
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”.
December 1990 2
Philips Semiconductors Product specification
PIN DESCRIPTION
Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.
December 1990 3
Philips Semiconductors Product specification
FUNCTION TABLE
INPUTS OUTPUT
nA nB nC nD nY
L X X X L
X L X X L
X X L X L
X X X L L
H H H H H
Notes
1. H = HIGH voltage level
L = LOW voltage level
X = don’t care
December 1990 4
Philips Semiconductors Product specification
December 1990 5
Philips Semiconductors Product specification
AC WAVEFORMS
Fig.6 Waveforms showing the input (nA, nB, nC, nD) to output (nY) propagation delays and the output transition
times.
PACKAGE OUTLINES
See “74HC/HCT/HCU/HCMOS Logic Package Outlines”.
December 1990 6
This datasheet has been download from:
www.datasheetcatalog.com