You are on page 1of 1

REPORT ON TORSION IN STRUCTURAL CONCRETE (ACI 445.

1R-12)

Baant, Z. P., and Yu, Q., 2005a, Designing Against Size


Effect on Shear Strength of Reinforced Concrete Beams
Without Stirrups: I. Formulations, Journal of Structural
Engineering, V. 131, No. 12, pp. 1877-1885.
Baant, Z. P., and Yu, Q., 2005b, Designing Against Size
Effect on Shear Strength of Reinforced Concrete Beams
Without Stirrups: II. Verification and Calibration, Journal
of Structural Engineering, V. 131, No. 12, pp. 1886-1897.
Belarbi, A., and Greene, G. G., 2004, Reinforced
Concrete Box Girders Under Cyclic Torsion, Proceedings
of the 13th World Conference on Earthquake Engineering,
Vancouver, BC, Canada, Aug. 1-6, 2004, 15 pp.
Belarbi, A., and Hsu, T. T. C., 1994, Constitutive Laws
of Concrete in Tension and Reinforcing Bars Stiffened by
Concrete, ACI Structural Journal, V. 91, No. 4, July-Aug.,
pp. 465-474.
Belarbi, A., and Hsu, T. T. C., 1995, Constitutive Laws
of Softened Concrete in Biaxial Tension-Compression, ACI
Structural Journal, V. 92, No. 5, Sept.-Oct., pp. 562-573.
Bentz, E. C., 2005, Empirical Modeling of Reinforced
Concrete Shear Strength Size Effect for Members without
Stirrups, ACI Structural Journal, V. 102, No. 2, Mar.-Apr.,
pp. 232-241.
Birkland, C. J., 1965, Strength of Rectangular Beams with
Longitudinal Reinforcement in Combined Torsion, Bending,
and Shear, Masters thesis, Department of Civil Engineering,
University of Washington at Seattle, Seattle, WA.
Bishara, A., and Londot, L., 1979, Flexural Rotational
Capacity of Spandrel Beams, Journal of the Structural
Division, V. 105, No. 1, pp. 147-161.
Bishara, A., and Peir, J. C., 1968, Reinforced Concrete
Rectangular Columns in Torsion, Journal of the Structural
Division, V. 94, Dec, pp. 2913-2934.
Boulton, N., and Boonsukha, B., 1959, Plastic Collapse
Loads for Circular Arc Girders, Proceedings of the Institution of Civil Engineers, June, London, UK.
Bredt, R., 1896, Kritische Bemerkungen zur Drehungselastizitt, Zeitschrift des Vereines Deutscher Ingenieure,
Band 40, No. 28, July 11, pp. 785-790; No. 29, July 18, pp.
813-817. (in German)
Cauchy, A., 1828, Sur les Equations qui Experimentent les Conditions dEquilibre ou les Lois de Mouvement
Interieur dun Corps Solide, Exercices de Mathematique,
Paris, France. (in French)
CEB-FIP, 1978, Model Code for Concrete Structures,
CEB-FIP International Recommendation, third edition,
Comite Euro-International du Beton (CEB), 348 pp.
Cerioni, R.; Ferreti, D.; and Iori, I., 1998, Torsional
Behavior of Prestressed High-Strength Concrete Beams,
Computational Modeling of Concrete Structures, pp.
797-806.
Chakraborty, M., 1977, Torsional-Balanced Steel in
Concrete Beams, Journal of the Structural Division, V. 103,
pp. 2181-2191.
Chen, W., 1982, Plasticity in Reinforced Concrete,
McGraw-Hill Book, New York, 474 pp.
Collins, M. P., 1973, Torque-Twist Characteristics of
Reinforced Concrete Beams, Inelasticity and Non-Linearity

87

in Structural Concrete, SM Study No. 8, University of


Waterloo Press, Waterloo, ON, Canada, pp. 211-231.
Collins, M. P., and Chockalingam, S., 1979, Reinforced
Concrete Beams Under Reversed Cyclic Torsional Loading,
Structural Concrete Under Seismic Actions, CEB Bulletin D
Information, No. 132, pp. 181-187.
Collins, M. P., and Lampert, P., 1973, Redistribution
of Moments at CrackingThe Key to Simpler Torsion
Design? Analysis of Structural Systems for Torsion, SP-35,
American Concrete Institute, Farmington Hills, MI, pp.
343-383.
Collins, M. P., and Mitchell, D., 1978, Torsional-Balanced
Steel in Concrete Beams Discussion by Michael P. Collins
and Denis Mitchell, Journal of the Structural Division, V.
114, pp. 1684-1687.
Collins, M. P., and Mitchell, D., 1980, Shear and Torsion
Design of Prestressed and Non-Prestressed Concrete
Beams, PCI Journal, V. 25, No. 5, pp. 32-100.
Collins, M. P., and Mitchell, D., 1991, Prestressed
Concrete Structures, Prentice Hall, Englewood Cliffs, NJ,
766 pp.
Collins, M. P.; Walsh, P. F.; Archer, F. E.; and Hall, A. S.,
1968a, Ultimate Strength of Reinforced Concrete Beams
Subjected to Combined Torsion and Bending, Torsion of
Structural Concrete, SP-18, American Concrete Institute,
Farmington Hills, MI, pp. 279-402.
Collins, M. P.; Walsh, P. F.; Archer, F. E.; and Hall, A. S.,
1968b, Reinforced Concrete in Torsion, UNICIV Report No.
R-31, University of New South Wales, NSW, Australia, 338 pp.
Delhumeau, G., 1999, LInvention du Beton arme:
Hennebique, 1890-1914, Horma, Institut Francais
dArchitecture, Paris, France, 344 pp.
Duleau, A., 1820, Essai Theorique et Experimental sur la
Resistance du Fer Forge, Paris, France (in French).
Elfgren, L., 1972a, Reinforced Concrete Beam Loaded
in Torsion, Bending and Shear, Publication 71:3, Division
of Concrete Structures, Chalmers University of Technology,
Gteborg, Sweden, 249 pp.
Elfgren, L., 1972b, Reinforced Concrete Beams Loaded
in Combined Torsion, Bending and Shear. A Study of the
Ultimate Load-Carrying Capacity, PhD thesis, Publication
71:1, Division of Concrete Structures, Chalmers University
of Technology, second edition, Gteborg, Sweden, 230 pp.
Elfgren, L., 1979, Torsion-Bending-Shear in Concrete
Beams: A Kinematic Model, Colloquium Copenhagen
1979: Plasticity in Reinforced Concrete, IABSE Reports,
Zrich, V. 29, pp. 111-118.
Elfgren, L.; Karlsson, I.; and Losberg, A., 1974a, TorsionBending-Shear Interaction for Concrete Beams, Journal of
the Structural Division, V. 100, No. 8, pp. 1657-1676.
Elfgren, L.; Karlsson, I.; and Losberg, A., 1974b, Nodal
Forces in the Analysis of the Ultimate Torsional Moment for
Rectangular Beams, Magazine of Concrete Research, V. 26,
No. 86, pp. 21-28; discussion in V. 27, No. 90, pp. 42-45.
Ersoy, U., and Ferguson, P. M., 1968, Concrete Beams
Subjected to Combined Torsion and ShearExperimental
Trends, Torsion of Structural Concrete, SP-18, American
Concrete Institute, Farmington Hills, MI, pp. 441-460.

You might also like