Professional Documents
Culture Documents
FPA-5000 Level 1 + 2
User Interface
Course instructor
Josef Angstenberger
Consulting
Important note
Josef Angstenberger
+49-89-6290-1740
Josef.Angstenberger@de.Bos
ch.com
Update
The material in the publication may only be disclosed to persons who are
11.12.2007
not employed in the Bosch Group with our express permission. Our express
Version 1.1
Versionnumber
1 Table of Contents
2 Legend
Goal:
Here you can see what the main goals in the following chapter are. What you should remember, know
at the end of the chapter
Caution:
Hint:
Here are some useful facts you will not read in the
documentation but may be very helpful for you and
your customers
To do
Literature:
To do:
Paragraph
2.1
2.2
2.4
2.4
That additional status bars exist and how you can see them
2.4
2.4
To do
3.1
Field
Explanation
Function keys
These keys are fix, they cannot be changed. They are language
independent.
Alphanumeric keypad
Key Switch
LED display
3.2
Icon
Type
Explanation
Support info
Key
Click on it and you receive contact data from the installer and information about the installation date and the firmware
Version installed.
Contact info from installer is only shown when configured in RPS
Network Key
Click on this key to access another panel in the network. At isolated panel nothing will happen when touching this key
Home Key
Press this key and you will always come back to the home
screen (as shown in above picture)
Click on this key to log in or log off. When being logged in you
get information on your present log in level.
Switch between the status bars if two or more are available. Call
up status bar to scroll rapidly through big lists. Indication that
more than one status line is accessible: The same icon is shown
on the status line.
Silence Buzzer
Back Key
Press the key and return to the previous selection (one level
back)
To arrive at the standard display, press the home screen, then
the back key.
Enter Key
3.3
The LEDs and their meaning is well explained in the manual of the MPC XX00 B.
Please refer on that on page 21, paragraph 4.2
3.4
Icon
) For more info see pages 22 and 33 to 37 of the manual of the MPC XX00 B
Quick overview of the complete panel at one glance (home status bar)
Shows all active fire alarms (internal and external alarms). Here, no element
is in fire alarm state. To see all fire alarms, press the key.
Shows all controls that have been activated, e.g. Sounder, relays etc. Here,
no control has been activated. To see all activated controls, press the key.
Shows all faults/troubles. Here: 1 fault. To see all faults, press the key.
r
s
&
Shows all elements that are in bypass or isolate status. Here: 1 element is in
bypass or isolate status. To see all elements, press the key.
&
Save time: The quick way to unbypass elements: Press this key,
select element(s) from the list and unbypass
Press this key and you receive a complete overview of the entire system. A
list with all message types, e.g. On, Fault, Bypassed etc. is shown in a concentrated form.
Save time: Pressing these keys are the fasted way to get to the elements not
in normal stat
II
III
3.5
Description
To select the field, touch it. In general more than one field can be selected. It is also
possible to scroll up or down and select additional fields
In this field you can go directly to the desired field. Depending on what had been selected earlier, you can enter the address or description of the device.
With these arrows you can scroll up or down the list. They are only shown when further fields exist above or below. For fast scrolling use the scroll bar.
By pressing one of these function keys, this function will be assigned to the selected
fields.
Principle: this function will be assigned to all selected field regardless of the function
they do have at present.
) For more info see paragraphs 5.6 and 5.8 of the manual of the MPC XX00 B
II
Description
In home screen select the function you want to assign the elements to
Select the element type the function shall be assigned to by clicking on them. The
color of the field or the frame will change.
Press the function key. Now this function will be assigned to all the elements
3.6
Standard Markings
&
Display a bypass group that consists of several elements. In order to display a list of
all elements of the bypass group, press the right-hand field.
Exercise
1. Bypass e.g. 4 detectors at once
2. Unbypass 2 of the bypassed detectors and leave the others in bypass state
4 Alarm mode
5 Fire alarm and trouble handling
Switch from day to night mode vice versa. Change the time
Bypass and Block (make bypass groups) unbypass - warning
History log
Diagnostic information
Panel passport (make sure end customer knows it)
Change device on MPC RS 232
Detector sensitivity
Need to Good to
know
know
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Category
Ease of use
Ease of use
Ease of use
Maintenance
Maintenance
Maintenance
End
user
x
x
x
x
x
Maintenance
Maintenance
Panel status
Security
Standard
Standard
application
Standard
Standard
Support situation
Support situation
Support situation
Support situation
Installer
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
7.1
2.
In FSP-5000-RPS you can enter all your contact data, which will then be shown
when the wrench icon on top of the touch foil is pressed. Make sure you always enter these data in RPS.
&
3.
The secure way your customer knows who to contact in case of problems
Overview of internal panel data
This feature belongs to diagnostics. Calling up this screen you receive information
about the firmware version, the CAN ID number, PCBA material number etc. You
might need it only rarely, but it is good to now it exists
assigned to it in FSP-5000-RPS
Make sure to always programm the day mode feature in FSP-5000-RPS
&
See chapter XXX in this document and chapter 17 of the manual of the MPC XX00 B
Despite automatic switch back configuration to night mode, changing the time on
the panel is still possible
2.
&
3.
Security: Security that all outputs are blocked No unwanted activation of outputs during maintenance work on the panel.
Time: By only one click all outputs are bypassed.
Overview of Panel status at one glance home status bar / status key
The LED indication offers a first overview of panel status. More detailled information
is available by the Home Status Bar. If information about additional states is needed, press the key Status on the Home Status Bar. In categories all states not in
normal mode are listed. For more info on concerned elements, press the specific
state field.
&
4.
7.2
&
Time and Money: Change of setting without changing and downloading the configuration.
For more info see paragraph 5.7 of the manual of the MPC XX00 B
&
)
2.
For more info see paragraph5.7 of the manual of the MPC XX00 B
Quick unbypass
The panel offers a way to unbypass elements in only a few seconds, by taking advantage of the home status bar. Use the home status bar also to arrive quickly at all elements in trouble or all controls activated
How to do it:
Press the key Bypass in the homes status line select Bypassed Select the list field you require, e.g. detectors Select all the elements you
want to unbypass press function key unbypass
&
)
3.
&
)