Professional Documents
Culture Documents
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ..........................................................................................1
DSR BASICS SYMBOLS/ICONS ...............................................................................................6
Front Panel ............................................................................................................................6
Back Panel ............................................................................................................................7
CONNECTING YOUR DSR ..........................................................................................................10
CAUTION
RISK OF ELECTRIC SHOCK
WARNING
CAUTION
Repairs
If you find the unit in need of repair, contact Star
Choice for repair or replacement.
Damage Requiring Service. Unplug this equipment
from the power source, and contact a qualified
service provider if any of the following situations
occurs:
If the power supply cord or plug is damaged.
If liquid or objects have fallen into the unit.
If the unit became wet from rain or water.
If the unit was dropped or damaged.
If the units performance changes.
Service. Do not try to service this product yourself. If
you open or remove the cover, you may be exposed
to dangerous voltage or other hazards and may void
the units warranty. Contact a qualified service
provider for all service.
Regulatory Information
Federal Communications Commission Radio and
Television Interface Statement for a Class B Device
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
Declaration of Conformity
According to 47 CFR, Parts 2 and 15 for Class B
Personal Computers and Peripherals, and/or CPU
Boards and Power Supplies used with Class B
Personal Computers, Motorola, Inc., 101 Tournament
Drive, Horsham PA, 1-215-323-1000, declares under
sole responsibility that the product complies with 47
CFR Parts 2 and 15 of the FCC Rules as a Class B
digital device. Each product marketed is identical to
the representative unit tested and found to be
compliant with the standards. Records maintained
continue to reflect the equipment being produced and
can be expected to be within the variation accepted,
due to quantity production and testing on a statistical
Canadian Compliance
This Class B digital device complies with Canadian
ICES-003.
207
209
317
319
505
530
ON/STANDBY.
Back Panel
207
Back panel POWER cord connection.
209
TELEPHONE LINE For Instant Pay-PerView (IPPV) reportback and caller ID.
ANTENNA INPUT For analog off-air
broadcast antenna or Cable TV.
317
319
505
530
Back Panel
Y Pb Pr
207
209
317
319
505
530
S-VIDEO OUTPUT
Back Panel
UHF
207
209
317
319
505
530
2**
**Note: The DSR530 is equipped with two satellite tuners. Each requires a separate satellite input connection to be able
to watch one program while recording another program.
10
will pass-through this RF source to the RF Output Connection when the DSR is in standby mode.
Once the above connections are secure, plug the DSR power cord or separate power supply (in the
case of the DSR207 or DSR209) into a standard power outlet. Wait one minute, and then press the ON
button located on the satellite receivers front panel.
Notes:
Video and audio quality should be best when you connect the DSR directly to your TV/monitor/projector
and an optional audio system. Use quality cables designed for these applications. Home theater A/V
receivers can provide a method to connect multiple input sources if your TV does not have enough
input connectors, and some home theater A/V receivers may enhance the video resolution or quality.
Refer to your home theater A/V receiver instructions for further information.
If you are using the component or DVI video outputs, you may have to toggle the HDTV mode select
button behind the flip-down door on the front panel of a DSR5xx series product. This toggles the HDTV
output between 1080i, 720p, 480p, 480i, and native modes. Native mode (0000) is the original
transmitted signal from the network/broadcaster. You should leave this on native mode unless your TV
or monitor requires a specific mode, such as 1080i.
11
12
13
DSR505
Off-Air Antenna
or Cable TV
14
DVI or
DVI to HDMI
Connection to
HDTV
Telephone
Line
Coaxial
Cable to
TV
Optical
Audio
UHF Remote Control Antenna
Digital
Audio
S-Video
USB
(Reserved for
Future Use)
Satellite
In
Component
VideoTo HDTV
(Green)
(Blue)
(2 Sets)
(Red)
DSR530
15
Motorola, Inc.
101 Tournament Drive
Horsham, PA 19044 U.S.A.
http://www.motorola.com
http://www.starchoice.com
534019-001-e
05/08