You are on page 1of 4

http://www.gocertify.com .

Date 30 November, 2015, 22:25

Quiz Title: TestOut CCNA 200-120 Practice Quiz


User Login:
User Name:
User E-mail:
User Score: 0
Total Score: 0
Passing Score %: 90
The user spent 517:00 on this quiz
has passed the quiz
1.[0/0] You have been put in charge of connecting two company networks that were previously separated. You
need to connect a 100BaseTx Ethernet network with an older token ring network. Most traffic will be localized
within each network, with only a little traffic crossing between networks. Both networks are using the TCP/IP
protocol suite. Which connectivity device would be the best choice in this situation?
A. Repeater
B. Hub
C. Router
D. Bridge
E. Switch
F. Gateway
Answer: E
2.[0/0] You manage a small LAN for a branch office. The branch office has six file servers. You want to use
full-duplex Ethernet and offer guaranteed bandwidth to each server. How should you design the network?
A. Connect all network devices to a switch. Connect each server to its own switch port.
B. Divide the network using a bridge. Place the six servers on one side of the bridge, with all client devices on the
other side.
C. Divide the network using a router. Place the six servers on one side of the router, with all client devices on the
other side.
D. Connect all network devices to a switch. On one switch port, connect a hub. Connect all six servers to this
hub.
Answer: C
3.[0/0] Which of the following methods helps to detect lost packets? (Select two.)
A. Flow control
B. Sequencing
C. CRC
D. Acknowledgements
E. Buffering
Answer: B E
4.[0/0] Workstation2 needs to send data to Workstation3. It sends out an ARP request for the address of the
default gateway. Which of the following are true of this request? (Select two.)
A. The switch sends the ARP request to Workstation1 and the router.
B. The switch sends the ARP request only to the router.
C. Only the router will respond with an address of 000b5f2a2222.
D. Only the router will respond with an address of 000b5f2a2223.
E. The switch, the router, and Workstation1 will each respond with their own IP address.
Answer: A C
5.[0/0] Which of the following are characteristics of a switch? (Select two.)
A. A switch reads the MAC address in a frame and makes forwarding decisions based on that address.
B. A switch reads the IP address in a packet and makes forwarding decisions based on that address.
1/4

http://www.gocertify.com . Date 30 November, 2015, 22:25

C. The collision domain on a switch is all devices connected to a single switch port.
D. The collision domain on a switch is all devices connected to the switch.
Answer: A C
6.[0/0] The following items describe the functions performed at various OSI model layers.
Logical topology, hardware addresses, media access, framing
Logical device identification, path identification and selection
Flow control, reliable data transfer, windowing, segmentation, and sequencing
Convert data to 0s and 1s, bit signaling and synchronization
Which of the following correctly identifies the layers that perform each of the functions listed here?
A. Data Link, Network, Transport, Physical
B. Network, Data Link, Transport, Physical
C. Network, Transport, Physical, Data Link
D. Physical, Transport, Network, Data Link
E. Transport, Network, Physical, Data Link
Answer: A
7.[0/0] You have a small network with two switches, SwitchA and SwitchB. Each switch has three client
computers connected. WrkA_1, WrkA_2, and WrkA_3 are connected to SwitchA using their own subnet, while
WrkB_4, WrkB_5, and WrkB_6 are connected to SwitchB using a different subnet. You need to connect SwitchA
and SwitchB so that workstations connected to SwitchA can communicate with workstations connected to
SwitchB. Which should you do?
A. Connect SwitchA and SwitchB to a router using a straight-through cable on each side.
B. Connect SwitchA and SwitchB with a crossover cable.
C. Connect SwitchA and SwitchB with a straight-through cable.
D. Connect SwitchA and SwitchB to a bridge using a crossover cable on each side.
E. Connect SwitchA and SwitchB with a bridge and a straight-through cable on each side.
Answer: A
8.[0/0] The following names are given to data at various stages in the encapsulation process.
Packets
Bits
Segments
Frames
To which layer of the OSI model do the names correspond?
A. Network, Physical, Transport, Data Link
B. Transport, Physical, Data Link, Network
C. Physical, Data Link, Network, Transport
D. Transport, Data Link, Network, Physical
E. Data Link, Transport, Physical, Network
Answer: A
9.[0/0] Which of the following are functions of the MAC sublayer in the OSI model? (Select Two.)
A. Defining a unique hardware address for each device on the network
B. Mapping hardware addresses to link-layer addresses
C. Creating routing tables based on MAC addresses
D. Letting devices on the network have access to the LAN
2/4

http://www.gocertify.com . Date 30 November, 2015, 22:25

Answer: A C
10.[0/0] You want to prevent collisions on your network by creating separate collision domains and defining
virtual LANs. Which of the following devices should you choose?
A. Bridge
B. Switch
C. Router
D. Active hub
Answer: B
11.[0/0] An Internet server has a single network interface that has been assigned an IP address. The server is
running both the FTP and HTTP services. A client computer initiates a session with the HTTP server. How is the
HTTP request from the client routed to the correct service running on the server?
A. Port or socket number
B. Session ID
C. IP address
D. Routing Information Protocol (RIP)
E. Sequence number
Answer: A
12.[0/0] Which of the following best describe how a switch functions? (Select two.)
A. It connects multiple network segments and forwards packets to the appropriate segment.
B. It connects multiple segments and broadcasts packets to all of its ports.
C. It connects multiple segments of different architectures. It translates packets, and forwards them to the
appropriate segment.
D. It segments the network and forwards packets based on logical addresses.
Answer: A B
13.[0/0] Which of the following is an advantage of using a bridge?
A. Bridges forward frames with little or no latency.
B. Bridges can be used to increase the maximum physical distance of a LAN.
C. Bridges offer guaranteed bandwidth to each device or group of devices.
D. Bridges create separate subnets.
Answer: B
14.[0/0] What is the purpose of the CRC in network communications?
A. Detect lost packets
B. Request retransmission of lost packets
C. Detect data errors
D. Correct data errors
E. Slow down or speed up data transmissions
F. Re-assemble packets into their original order
Answer: D
15.[0/0] Which of the following are general advantages of using routers on your network? (Select three.)
A. Routers support multiple routing protocols for better flexibility.
B. Routers provide more features, such as flow control, error detection, and congestion control, than switches or
bridges.
C. Routers provide multiple links between devices to support load balancing.
D. Routers are less expensive than bridges or switches.
E. Routers require less configuration and management than bridges.
F. Routers provide guaranteed bandwidth between two devices.
Answer: A C F
3/4

http://www.gocertify.com . Date 30 November, 2015, 22:25

16.[0/0] What role does ARP play in the routing process?


A. If a router does not know a destination device's MAC address, it sends an ARP broadcast containing the IP
address and requesting the MAC address.
B. If a router does not know a destination device's IP address, it sends an ARP broadcast containing the MAC
address and requesting the IP address.
C. If a router knows the MAC and IP address of a destination host, it sends an ARP request to update the other
routers' route tables.
D. ARP does not play any role in the routing process. Switches use ARP to map IP addresses to MAC addresses
in collision domains.
Answer: A
17.[0/0] A client computer starts to download some files from an FTP server named FTPSrv1. While the first
download is in progress, the user opens a second instance of the FTP program and initiates a second download.
What does the server and the client use to keep each download separate?
A. Port or socket numbers
B. Session ID
C. IP Address
D. Sequence numbers
Answer: A
18.[0/0] Which of the following accurately describe how switches and hubs work? (Select two.)
A. Switches use the hardware address in the frame to send it only to the port where the device is located.
B. A hub repeats frames to all ports, regardless of the destination address.
C. A switch uses the logical addresses in a packet to send it through the correct port to all VLANs defined on that
port.
D. A hub uses the hardware address in the frame to forward it to the hosts on the VLAN that corresponds to that
address.
Answer: A B
19.[0/0] Which of the following is a list of Layer 2 devices?
A. Bridge, network interface card, switch
B. Hub, network interface card, switch
C. Network interface card, router, switch
D. Bridge, hub, switch
Answer: A
20.[0/0] Which of the following statements are true about bridges? (Choose two.)
A. Bridges connect two network segments with the same network address.
B. Bridges connect two networks that use different protocols.
C. Bridges broadcast messages from one network segment to another.
D. Bridges maintain a database of routes through a network.
E. Bridges give each segment guaranteed bandwidth.
Answer: A E

4/4

You might also like