You are on page 1of 8

Ibm.

com/maas360

IBM MaaS360 Productivity Suite: iOS Enrollment Guide without MDM


Introduction
These instructions will guide you through the process to quickly enroll your device to access the IBM MaaS360
Productivity Suite without Mobile Device Management (MDM) to manage a device. The steps are slightly different
depending on your devices operating system (iOS, Android, Windows Phone, etc.), so make sure you have the
appropriate instructions.
There are a number of ways you can begin the enrollment process:

You may receive a MaaS360 email enrollment request


You may receive a MaaS360 SMS message
Your organization may send you a specific enrollment URL

There are also a number of options for authentication, depending on your organizations security needs. These
include a passcode provided in your enrollment email, 2-factor authentication, and using your Exchange ActiveSync
or Active Directory credentials.

Enroll your device and install the profile


1. Access the URL in the devices browser.
Open the email or SMS message on the device you want to enroll, or enter the URL you were sent.

OR

If you are enrolling using the


email, tap the link or type it
into the devices browser. You
can also scan the QR code.
If you are enrolling using the
SMS message, tap the link.

Ibm.com/maas360

2. At Step 1, tap Install.


Note: Because you are installing your device in MaaS360 Productivity Suite
without MDM, you will not return to this screen.

3. In the App Store, tap the cloud download symbol.

Ibm.com/maas360

4. Next, tap Open.

5. On the Get Started screen, tap I have a user account to activate the device.

Ibm.com/maas360

6. Enter the corporate ID you were given by your administrator and your email
on the next screen. Tap Continue.

7. Enter the passcode from the email. Tap Ownership to change the default
ownership information.

Ibm.com/maas360

Select an ownership option from the bottom of the screen, if necessary.

Tap Continue to move to the next screen.

Ibm.com/maas360

8. Read the Terms and Conditions, and then tap Accept.

9. Enter a four-character PIN.

Ibm.com/maas360

10. Enter it again.

11. You will be prompted to accept notifications. Tap Dont Allow or OK.

Ibm.com/maas360

12. Your device is now enrolled in MaaS360. To access the corporate content inside
the protected container, tap the MaaS360 icon on your device.

Copyright 2016 Fiberlink, an IBM Company. All rights reserved.


Information in this document is subject to change without notice. The software described in this document is
furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in
accordance with the terms of those agreements. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted in any form or any means electronic or mechanical, including photocopying and
recording for any purpose other than the purchasers personal use without the written permission of Fiberlink
Communications Corporation.
All brands and their products are trademarks or registered trademarks of their respective holders and should be
noted as such.
Fiberlink Communications Corporation
1787 Sentry Parkway West
Blue Bell, PA 19422
July 2016

You might also like