Professional Documents
Culture Documents
This document describes the commands & syntax for the Flash2Cmd application.
Flash2Cmd is a command line application. The available commands can be seen by
typing Flash2Cmd.
The output is as shown below.
______________________________________________________________________________________________________________________
Solid State Disks Ltd
The Granary, Hose Hill
Sulhamstead Berkshire RG7 4BB
United Kingdom
P: + 44 (0) 1189 323499
F: + 44 (0) 1189 323510
www.reactivegroup.com
Reg. No. 06474031
VAT No 932 0970 32
_______________________________________________________________________________________________________
This command takes the drive off line, creates the backup and leaves the drive off
line. To backup and place the drive back on line on completion the flag --go-online
must be appended to the command line Flash2cmd.
______________________________________________________________________________________________________________________
Solid State Disks Ltd
The Granary, Hose Hill
Sulhamstead Berkshire RG7 4BB
United Kingdom
P: + 44 (0) 1189 323499
F: + 44 (0) 1189 323510
www.reactivegroup.com
Reg. No. 06474031
VAT No 932 0970 32
_______________________________________________________________________________________________________
To restore and place the drive back on line on completion the flag --go-online must be
appended to the command line Flash2cmd.
______________________________________________________________________________________________________________________
Solid State Disks Ltd
The Granary, Hose Hill
Sulhamstead Berkshire RG7 4BB
United Kingdom
P: + 44 (0) 1189 323499
F: + 44 (0) 1189 323510
www.reactivegroup.com
Reg. No. 06474031
VAT No 932 0970 32
_______________________________________________________________________________________________________
______________________________________________________________________________________________________________________
Solid State Disks Ltd
The Granary, Hose Hill
Sulhamstead Berkshire RG7 4BB
United Kingdom
P: + 44 (0) 1189 323499
F: + 44 (0) 1189 323510
www.reactivegroup.com
Reg. No. 06474031
VAT No 932 0970 32
_______________________________________________________________________________________________________
The SetOnLine & SetOffLine Command puts the drive on line to the SCSI bus
or takes it off line.
Note that SetOffLine is a request to take the drive off line. The drive will not go off
line immediately but will go off line 10 seconds after the last SCSI read or write
or 10 seconds after a power-up. GetStatus command should be used to check when
the command has completed.
______________________________________________________________________________________________________________________
Solid State Disks Ltd
The Granary, Hose Hill
Sulhamstead Berkshire RG7 4BB
United Kingdom
P: + 44 (0) 1189 323499
F: + 44 (0) 1189 323510
www.reactivegroup.com
Reg. No. 06474031
VAT No 932 0970 32
_______________________________________________________________________________________________________
______________________________________________________________________________________________________________________
Solid State Disks Ltd
The Granary, Hose Hill
Sulhamstead Berkshire RG7 4BB
United Kingdom
P: + 44 (0) 1189 323499
F: + 44 (0) 1189 323510
www.reactivegroup.com
Reg. No. 06474031
VAT No 932 0970 32
_______________________________________________________________________________________________________
The EraseCard command erases the whole of the Compact Flash Card.
To determine when the erase is complete the GetStatus command must be used. While
the erase is in progress the green LED near the card slot flashes.
______________________________________________________________________________________________________________________
Solid State Disks Ltd
The Granary, Hose Hill
Sulhamstead Berkshire RG7 4BB
United Kingdom
P: + 44 (0) 1189 323499
F: + 44 (0) 1189 323510
www.reactivegroup.com
Reg. No. 06474031
VAT No 932 0970 32
_______________________________________________________________________________________________________
The EraseCapacity command erases the Compact Flash card up to the capacity
of the drive, not necessarily the whole of the card.
Therefore it is quicker than the EraseCard command. To determine when the erase is
complete the GetStatus command must be used. While the erase is in progress the
green LED near the card slot flashes.
______________________________________________________________________________________________________________________
Solid State Disks Ltd
The Granary, Hose Hill
Sulhamstead Berkshire RG7 4BB
United Kingdom
P: + 44 (0) 1189 323499
F: + 44 (0) 1189 323510
www.reactivegroup.com
Reg. No. 06474031
VAT No 932 0970 32
_______________________________________________________________________________________________________
The EraseDevice command erases the Compact Flash card up to the device
settings.
To determine when the erase is complete the GetStatus command must be used. While
the erase is in progress the green LED near the card slot flashes.
______________________________________________________________________________________________________________________
Solid State Disks Ltd
The Granary, Hose Hill
Sulhamstead Berkshire RG7 4BB
United Kingdom
P: + 44 (0) 1189 323499
F: + 44 (0) 1189 323510
www.reactivegroup.com
Reg. No. 06474031
VAT No 932 0970 32