Professional Documents
Culture Documents
Overview
Contents
Warranty
System requirements
Description of parts
Installation procedure
How to use your CDU
Firmware updates
Compatibility
Disclaimer
Contents
Before unpacking check if the following items are included in the box.
The box contains;
A. CDU/FMS
B. 24 V adapter
C. Ethernet cable
If for some reason one of these parts are missing, please send an email to
info@flyengravity.com. Please mention the serial number, date of purchase and name of
reseller.
Warranty
The CDU comes with a full year of warranty on all technical parts.
The CDU should only be used with the supplied 24V adapter. The electronics are protected
by a casing and should not be removed. Warranty void if casing is removed.
Warranty will only be given when the unit is used for personal use in a hobby environment
under normal conditions.
In case of a technical defect, contact Flyengravity, by sending an email to
info@flyengravity.com, describing your defect.
System requirements
a computer system with flight simulator installed
an additional 737 software package like prosim737 or PMDG NGX
free ethernet port
Description of parts
5 color display
LSK keys
Keypad
RSK keys
Knob for adjusting
backlight
Execute led
Annunciators
Handle
24V input
for maintenance
do not use
ethernet
do not use
status indicator
Installation
for use with Prosim737
STEP 1
Check your computers IP address.
STEP 2
Power up your CDU
1. Unpack your CDU and use the supplied 24-V adapter.
Insert the powerplug and wait for the CDU to start up.
NOTE: After you apply power to the CDU,the FAIL indicator led will shortly lit up.
After about 15 seconds the CDU the start up sequence is ready and the FAIL
indicator led will lit up again.
During start up the display will remain black.
( we have choosen not to display our logo or any other information during start up, to keep all as real as possible)
STEP 3
Connect to Prosim737,
note you need version 1.43 or higher
Firmware update
The CDU is designed to allow future rmware updates.
In this case we can ensure that your CDU will keep up to date and allow the cdu to be
used for other types of aircraft in the future aswell as other software programms.
The procedure for updating the rmware is very simple.
In case a rmware update is necessary, an announcement will be made on
www.flyengravity.com
Disclaimer
This product is made for use with ight simulation and should in no case be used in real avia tion.
Engravity and her associated partners except no resonsibility for the misuse of this product.
This product should only be used in a ight simulation environment and is intended to be used
for hobby purposes only.
The term product means the 737NG CDU.
The names Boeing, Microsoft, Prosim737 and PMDG are registered trademarks owned by the
respective owners
The names Engravity, Flyengravity and information such as text and pictures, may not be
used by third parties in any form, written, electronically or printed, without explicit approve
ment in writing to Engravity BV, Koperweg 11G, 2401LH Alphen a/d Rijn.
This product is sold for personal use, It may not be resold to third parties as a commercial
activity, neither as parts or as part of a commercial ight simulator not produced by Engravity BV
without written approvement.