You are on page 1of 10
CIDE PRESS RELEASE ACT 520 (AMENDMENT 2011): CERTIFICATION OF STANDARDS COMPLIANCE FOR BUILDING MATERIALS ENFORCED ON 1 DECEMBER Kuala Lumpur, 26 November: Beginning 1 December, only building materials which have received the Certification of Standards Compliance can be used in construction projects, The six-month grace period provided under the Act 520 (amendment 2041) which has been approved for implementation by the Minister of Works Dato’ Sri Haji Fadillah Yusof on 1 June 2015, will end on November 30, 2015. There are 18 affected building matenuls listed under The Fourth Schedule Subsection 33 C (1) in the Actas below: Sanitary wares (ceramic) Ceramic tiles Steel frame scaffoldings Vitrified clay pipes and fitting and pipe joints for drains and sewers Cold reduced mild steel wire for reinforcement of concrete Steel welded fabric for reinforcement of concrete Portland cement Hydraulic Cement Hot rolled stee! bars for reinforcement of concrete Prefabricated timber roof truss system Hot rolled non alloy structural steel sections Precast concrete pile for foundation Steel wire ropes for lifts Specification for steel frame scalfoldings Iron and steel products Insulation materials Float glass Modular Coordination in Building BEDRZSY RN OUSENS CIDB Senior General Manager of Operations Sector Megal Kamil Azmi bin Megat Rus Kamnarani said thal under the amended Act, anybody who 1s found guilly of dealing with building materials which have not received the standards certification, can be fined not less than RM10,000 and not more than RMS00,000. “All contractors, distributors and manufacturers are reminded to ensure that the building materials they use comply with the specified standards,” he said. He said, the Act 520 was amended to ensure thal only building materials which meels the specified standards are used in construction projects. This will prevent any safely nisks to construction personnels and the public from the usage of low qualily materials. The enforcement of this Act will also enable the identification of certified building materials through standardized marking For more infomation regarding the building materials slandard certification and registration, please email qpass@cidb.gov.my or call 03-40477447/7428 About CIDOB The Construction industry Development Board was established under the Construction Industry Development Act (Act 520) to develop the Capacity and Capability of the Construction Industry Through Enhancement of Quality and Productivity by Placing Great Emphasis on Professionalism, Innovation and Knowledge in the Endeavour (o Improve the Quaily of Lite. Media contacts: Abdul Rakis Santa rakis@cidb.gov.my 03-40477262/ 0126200360 Noryaniismail — noryani@cidb.gov.my —_03-40477027 / 019-2856867 auton amt wn: so7ens/ouoys November 2015 PEMAKLUMAN LARANGAN BERURUSAN DENGAN BAHAN BINAAN YANG TIDAK DIPERAKUKAN TUIVAN Notis ini bertuiuan untuk memaklumkan kepada semua orang yang berurusan dengan bahan binaan agar memperolehi Pemerakuan Pematuhan Standard ( PPS ) yang dikeluarkan oleh Lembaga bagi bahan binaan yang disenaraikan di dalam Jadual Keempat Akta 520 (Pindaan 2011) ‘OBIEKTIF 4 Memastikan setiap bahan binaan yang dikuatkuasakan mematuhikehendak- kkehendak standard yang ditetapkan bagi Kegunaan dalam industri pembinaan, 42. Mempertingkatkan integritistruktur dan daya tahan hasilKerja-kerja pembinaan, 43 Melindungi hak pengguna daripada mendapat bahan binaan yang tidak berkualitt serta dapat menjamin keselamatan dan kesihatan orang awam. KAEDAH PENDAFTARAN PERAKUAN PEMATUHAN STANDARD (PPS) rang yang berurusan boleh memperolehi PPS melalu! persijilan produk yang dijalankan ‘oleh badan-badan persijlan yang diperakukan oleh Lembaga dan menjalani verifikasi bahan binaan. Permohonan untuk PPS boleh dibuat di csomacidb,ov.my, Carta alir prosidur Perakuan Pematuhan Standard adalah seperti di Lamplean A, Al dan B (Sia lihat lampiran), JENIS-JENIS BAHAN BINAAN PENGUATKUASAAN Sila ambil maklum bahawva larangan berurusan dengan bahan binaan yang tidak diperakukan, ‘adalah berkuatkuasa 1 Disember 2015. Kegagalan berbuat demikian adalah merupakan satu kesalahan di bawah Seksyen 33D dan boleh dihukum sekiranya disabitkan dengan denda tidak kurang RM 10,000.09 tetap tidak melebihi RM 500,000.00, “ MEMBINA KEIAYAAN ANDA” Maydrhoo (MEGAT KAMIL AETATMEGAT RUS KAMARANI) Pengurus Besar Kanan \Lembaga Pembangunan Industri Pembinaan Malaysia (C108) 27 November 2015, Lampiran A PROSES PERMOHONAN PERAKUAN PEMATUHAN STANDARD (PPS) PRODUK TEMPATAN SECARA “ON-LINE” ey Mohon Akses Permohonan Pendaftaran Disyorkan Untuk mendapatkan “username” dan “password” Pengisian maklumat produk dan bayaran: Baru ~ RM 1,500.00 Pembaharuan —RM 750,00 Pembaharuan dengan penambahan ‘Semakan data dan dokumen (Pendaftaran Syarikat & Product Certificate) Pemeriksaan fizikal kilang dan produk (berdasarkan standard) Kelulusan dalam tempoh 3 hari bekerja Lampiran A1 PROSES PERMOHONAN PERAKUAN PEMATUHAN STANDARD (PPS| PRODUK TEMPATAN SECARA “ON-LINE” PENAMBAHAN PRODUK ) Pengisian maklumat produk dan bayaran penambahan produk (dalam tempoh sah laku PPS) : RM 750.00 Semakan data dan dokumen (Pendaftaran Syarikat & Product Centificate ) Pemeriksaan fizikal kilang dan produk (berdasarkan standard) Disyorkan Kelulusan dalam tempoh 3 hari bekerja Lampiran 8 PROSES PERMOHONAN PERAKUAN PEMATUHAN STANDARD (PPS) BAG! PRODUK IMPORT anual ‘Secara Online ccPM Untuk Konsaimen Pensijilan Produk ‘mendapatkan (langkamasa pendek) (langkamasa Panjang) “username” dan a) “password” Pengisian maklumat produk dan bayaran: Baru~RM 1,500.00, Pembaharuan = RM 750.00 Permohonan *TPIB Form, Permohonan Pendaftaran Tidak Semakan data dan Lengkap | dokumen (Pendaftaran ‘Syarikat & Product centfcote) Lengkap Pemerikssan fikal Gagal eral om Veritas 8 bilang luar negara dan Ficikal ‘roduk (ber

You might also like