You are on page 1of 8

McKissick Oilfield Servicing Blocks

SEE APPLICATION AND


WARNING INFORMATION
Para Espaol: www.thecrosbygroup.com

M-491

M-491G

See Pages 358 - 365

New design provides the dependability of standard McKissick Snatch


Blocks, along with features that make it perfect for the challenging needs
of Tugger Hoist and Tower Erection applications.
A wide variety of configurations:
4, 8, 12, 15, 25 or 30 metric ton capacity
3/8, 7/16, 1/2, 9/16, 5/8, 7/8, 1 and 1-1/4 wire line sizes
Painted or Galvanized finish
8 and 10 blocks furnished with dual rated wireline sheaves.
Forged steel swivels, tees, yokes and shackles are Quenched & Tempered.
Sheave lubrication through center pin for easy maintenance.
Design factor of 4 to 1.
All blocks 14 and larger are furnished with McKissick Roll Forged sheaves with flame
hardened grooves.
Recessed sideplate design reduces the gap between the sheave rim and the sideplate, allowing the
sheave assembly to be captured in the block if loss of center pin occurs.
Sealed tapered roller bearings extend the life of the center pin and bearings, and allows for faster
line speeds than recommended with standard snatch blocks.
Shackle fitting swivels for easy positioning.
Suitable for hoisting personnel, contingent upon all employees, including the winch operator,
being trained to follow any applicable Federal, local and industry standards.
Tugger/Derrick applications: API RP54
Tower applications: OSHA directive CPL 2-1.36
Holes through side plates are available for secondary block securement device.
Manufactured by an API Q1 Certified facility.
Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS
Guide for Certification of Cranes.
All sizes are RFID EQUIPPED.

M-491 / G-491 Tower/Derrick Hoist Blocks


Working
Sheave
Wire Rope
M-491S
Load Limit
Diameter
Size
Stock No.
(t)*
(in.)
(in.)
Painted
4
8
3/8 - 1/2
2020161
8
10
3/8 - 1/2
2020806
8
10
1/2 - 9/16
2020824
12
10
1/2 - 9/16
2021118
12
14
5/8
2021136
12
14
3/4
2021154
15
16
7/8
2021172
15
16
1
2021190
25
18
1 1/8
2032312
30
20
1 1/4
2032321
* Ultimate Load is 4 times the Working Load Limit.
Contact our Speicals Sales Department for blocks up to 350 Tons or reference the special request form on page 435.

348

M-491G
Stock No.
Galvanized
2020170
2020815
2020833
2021127
2021145
2021163
2021181
2021199
2032315
2032324

Weight
Each
(lbs.)
35
55
55
55
95
95
150
150
260
675

Copyright 2011 The Crosby Group LLC


All Rights Reserved

McKissick Oilfield Servicing Blocks


SEE APPLICATION AND
WARNING INFORMATION
Para Espaol: www.thecrosbygroup.com

70 SERIES BLOCKS
Also available with
Rod Hook Clevis

See Pages 358 - 365

McKissick Oilfield Tubing Blocks utilizing new Split Nut Retention


System. Revolutionary new retention system eliminates conventional
threaded nut and potential problems associated with thread corrosion.
Exclusive E-Z opening guards, no bolts to pull out and lose. Feature gives fastest possible exposure of
sheave cluster for quick reeving.
Extremely short overall length, extra weight, excellent balance for fast non-wobbling falls.
Extra large sealed sheave bearing diameters for fully rated capacities.
Roller thrust bearing in hook.
Duplex hook for easy elevator operation, locks in eight positions.
Convenient rod hook clevis available.
Completely streamlined, no projections.
McKissick Roll-Forged, flame hardened sheaves, grooved for proper wire line size. Contact Crosby for
additional wire line sizes.
McKissick Split-Nut hook parts precision machined and individually fitted for maximum performance.
All blocks available with additional cheek weights.
Manufactured to API-8A. Can be manufactured to API-8C specifications when requested at time
of order.
All sizes are RFID EQUIPPED.

70 Series Tubing Blocks

The 70 Series has a spring loaded hook that is better for heavy usage and larger depths.
Tends to last longer since the shock loads are somewhat absorbed.
Working
Load Limit
(Tons)
75
75
100
100
150
150
150
150

Wire Line Size


(in.)
7/8
7/8
1
1
1-1/8
1-1/8
1-1/8
1-1/8

Weight Each
(lbs.)
1770
1815
2634
2750
4450
4068
4400
4462

McKissick
Blocks

Stock No.
111792
111890
111818
111916
111827
111925
128793
125545

Block
Config.*
20 73
20 73-A**
24 73
24 73-A**
30 73
30 73-A**
30 74
30 74-A**

Rod Hook Clevis


Working Load
Limit
(lbs.)
25,000
25,000
40,000
40,000
45,000
45,000
45,000
45,000

* Spring loaded duplex hook assuring ample travel for efficient tubing operations. No load carrying threads
** A = Rod Hook Clevis attachment standard.

80 SERIES BLOCKS
Also available with
Rod Hook Clevis

80 Series Tubing Blocks

The 80 Series has no spring loaded hook and is better for shallow depths and rework.

Stock No.
112130
112238
112149
112247
112158
112256
112167
112265
112176
112274
117475
117484
112185
112283
117493
117509

Block
Config.
17" 83
17" 83-A**
20" 82
20" 82-A**
20" 83
20" 83-A**
24" 82
24" 82-A**
24" 83
24" 83-A**
24" 84
24" 84-A**
30" 83
30" 83-A**
30" 84
30" 84-A**

Rod Hook Clevis


Working Load
Limit
(lbs.)
15,000
15,000
15,000
15,000
25,000
25,000
25,000
25,000
40,000
40,000
40,000
40,000
45,000
45,000
45,000
45,000

Working
Load Limit
(Tons)
50
50
50
50
75
75
75
75
100
100
100
100
150
150
150
150

Wire Line Size


(in.)
8-Jul
8-Jul
8-Jul
8-Jul
8-Jul
8-Jul
1
1
1
1
1
1
1/1/2008
1/1/2008
1/1/2008
1/1/2008

Weight Each
(lbs.)
1082
1110
1125
1243
1603
1659
1800
1830
2200
2185
2700
2750
2700
3564
3850
4130

** A = Rod Hook Clevis attachment standard.

Copyright 2011 The Crosby Group LLC


All Rights Reserved

349

350
Tuesday, January
4, 2011
McBlock_English.fm Page 346 Wednesday,
November
24,3:26
2010PM
12:06 PM

McKissick Oilfield Servicing Blocks


SEE APPLICATION AND
WARNING INFORMATION
Para Espaol: www.thecrosbygroup.com
s k c o l B

g n i c i v r e S

d l e i f l i O

On Pages 358-365

k c i s s i K c M

WELL LOGGER'S
BLOCKS

Floor Blocks & Top Blocks

475

Alloy aluminum housing for maximum strength and minimum weight.


Conductor cable ONLY is recommended for use with Well Logger's Blocks.
For use in high speed well logging, perforating, etc.
Extra large double row, pre-adjusted sealed tapered bearing.
Quick opening pin for fast string-up, light weight for easy handling.

Sheave
Diameter
(in.)
7
10
10
12
14
14
20
24

Block
No.
475
473
475
475
475
477
477
477

Floor Block
Stock No.
180020
180128
180253
180440
180618
169784
191072
191107

FLOOR BLOCKS
Working
Conductor
Load Limit
Cable Size
(Tons)*
(in.)
1-1/2
3/16
1-1/2
3/16
2-1/2
5/16
2-1/2
5/16
2-1/2
5/16
6
1/4
6
1/4
10
5/16

Weight
Each
(lbs.)
10
11
21
24
43
58
70
130

Connection
Swivel Hanger
Swivel Hanger
Swivel Hanger
Swivel Hanger
Swivel Hanger
Swivel Clevis
Swivel Clevis
Swivel Clevis

* Ultimate Load is 4 times the Working Load Limit.


Other cable sizes available upon request.

477
Sheave
Diameter
(in.)
7
10
12
14

Block
No.
476
476
476
476

Top Block
Stock No.
180075
180333
180529
180707

TOP BLOCKS
Working
Load Limit
(Tons)*
2-1/2
4
4
4

Conductor
Cable Size
(in.)
5/16
5/16
5/16
5/16

Weight
Each
(lbs.)
10
21
24
43

Connection
Stinger Pin
Stinger Pin
Stinger Pin
Stinger Pin

* Ultimate Load is 4 times the Working Load Limit.

476

350

Copyright 2011 The Crosby Group LLC.


All Rights Reserved

Thursday, March
10, 2011
11:00 12:06
AM PM
McBlock_English.fm Page 347 Wednesday,
November
24, 2010

McKissick Oilfield Servicing Blocks


SEE APPLICATION AND
WARNING INFORMATION
Para Espaol: www.thecrosbygroup.com
s k c o l B

g n i c i v r e S

d l e i f l i O

On Pages 358-365

k c i s s i K c M

CROWN BLOCKS

Crown Blocks

McKissick Roll-Forged sheaves with flame hardened grooves.


Double row pre-adjusted sealed tapered bearings mounted on a steel shaft.
Heavy center and side plates for proper support of center pin.
Pre-assembled units for rapid attachment to crown assembly for installation on derrick.
On multiple sheave assemblies, one sheave can be grooved for sand line on request.
Other sizes available upon request.
Sheaves manufactured to API-8A specifications.

Offshore

731

Sheave
Diameter
(in.)
24
24
24
24
24
24
24
30
30
30
30
30

Block
No.
241
242
243
731
732
733
734
741
742
743
744
745

Crown Block
Stock
No.
351158
351167
351176
351185
351194
351201
351210
351229
351238
351247
351256
351265

No. of
Sheaves
1
2
3
1
2
3
4
1
2
3
4
5

Working
Load Limit
(Tons)
15
30
45
35
75
100
125
40
80
110
140
170

Standard
Wire Rope
Size
(in.)*
7/8
7/8
7/8
1
1
1
1
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8

Weight
Each
(lbs.)
200
278
375
200
350
525
720
325
560
800
982
1163

* May be furnished in other wire rope sizes.

Block Systems for Offshore pedestal mounted cranes certified to API 2C are considered
critical components. McKissick provides blocks, overhaul balls, sheaves and wedge sockets
that meet the critical component requirements of API 2C to required CV value (It is the
responsibility of the crane manufacturer to license or certify these components.)

Reference page 438 to assist in proper specification.


Copyright 2011 The Crosby Group LLC
All Rights Reserved

351

McKissick
Blocks

McKissick API 2C Block Systems

352
McBlock_English.fm Page 348 Tuesday,
Thursday,January
January4,6,2011
2011 3:26
1:31PM
PM

McKissick Oilfield Drilling Blocks


SEE APPLICATION AND
WARNING INFORMATION
Para Espaol: www.thecrosbygroup.com

On Pages 358-365

RJ Style Drilling Blocks


Capacities Available: 150, 250 & 350 Tons
Double row, pre-adjusted tapered bearings with seals.
Blocks contain McKissick Roll-Forged sheaves with flame
hardened grooves
Grooves are API profile
Separate lubrication channel to each sheave.
Easy opening guards for quick string-up (no bolts to pull out and
lose).
Each hook block is fitted with position lock and swivel lock assemblies.
Additional weights available upon request.
Manufactured to the requirements of API 8C, including all
documentation.
Each block is individually serialized for full traceability.
Furnished with Certificate of Conformance.
Hook is spring loaded with hydraulic snubber.
Minimum design temperature of -20 degree C (-4 degree F).
Standard top coat finish is safety orange enamel.
Other paint colors and systems are available on request.
Individual parts are primer coated on exposed surfaces.
Combination hook blocks have interchangeable parts with BJ type
McKissick blocks built up to 1982.
Contact Crosby Customer Service for details.
All sizes are RFID EQUIPPED.
s k c o l B

g n i l l i r D

d l e i f l i O

k c i s s i K c M

RJ Style Drilling Blocks


rjblock

RJ Block
Model
Stock
No.
No.
864
2028185
865
2028194
866
2028203
868
2024318
869
2024317
870
2024301

Working
Load Limit
(Tons)
150
150
150
250
250
350

Sheave
Diameter
(in.)
30
36
36
36
42
42

No. of
Sheaves
4
4
5
5
5
5

Standard
Wire Rope
Size
(in.)*
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/4

Dimensions
(in.)
A
117.03
121.62
121.62
129.44
135.44
147.50

B
C
D
E
103.52 89.03 32.50 20.25
108.12 93.62 38.50 22.00
108.12 93.62 38.50 26.75
115.19 100.56 38.00 24.25
121.19 106.56 44.00 24.25
132.50 113.50 44.00 24.25

F
30.00
36.00
36.00
36.00
42.00
42.00

G
2.38
2.38
2.38
3.75
3.75
3.75

H
3.00
3.00
3.00
3.25
3.25
3.25

J
20.00
20.00
20.00
19.75
19.75
22.00

K
2.00
2.00
2.00
1.88
1.88
2.50

L
4.25
4.25
4.25
4.00
4.00
4.00

Weight
Each
(lbs.)
6,490
8,460
9,650
10,500
11,000
12,700

* Additional wire rope sizes are available.

352

Copyright 2011 The Crosby Group LLC.


All Rights Reserved

353
McBlock_English.fm Page 349 Tuesday,
Thursday,January
January4,6,2011
2011 4:07
1:43PM
PM

McKissick Oilfield Drilling Blocks


SEE APPLICATION AND
WARNING INFORMATION
Para Espaol: www.thecrosbygroup.com

On Pages 358-365

RP Style Traveling Blocks


Capacities Available: 250, 350, 500, 750 and 1000 Tons
Double row, pre-adjusted tapered bearings with seals.
Blocks contain McKissick Roll-Forged sheaves with flame hardened grooves
Grooves are API profile

Separate lubrication channel to each sheave.


Easy opening guards for quick string-up (no bolts to pull out and lose).
Bail design to adapt to comparable capacity drilling equipment
Additional weights available upon request.
Manufactured to the requirements of API 8C, including all documentation.
Each block is individually serialized for full traceability.
Furnished with Certificate of Conformance.

Minimum design temperature of -20 degree C (-4 degree F).


Standard top coat finish is safety orange enamel.
Other paint colors and systems are available on request.
Individual parts are primer coated on exposed surfaces.
Block side plates can be drilled to adapt customer supplied equipment.
Easy bail pin removal.
All sizes are RFID EQUIPPED.
g n i l l i r D

d l e i f l i O

k c i s s i K c M

McKissick
Blocks

s k c o l B

RP Style Drilling Blocks


Standard
Working
Sheave
Wire Rope
RP Block Load Limit Diameter No. of
Size
A
B
Stock No.
Sheaves
Tons
(in.)
(in.)*
2031027
250
36
5
1-1/8
74.00
63.00
2032319
250
42
5
1-1/8
80.00
69.00
2029783
350
42
5
1-1/4
80.00
69.00
2031434
350
42
6
1-1/4
80.00
69.00
2029735
500
60
6
1-3/8
98.25
84.25
2029761
750
60
7
1-1/2
107.25 92.25
2032326
1000
72
8
1-3/4
127.25 109.25

Dimensions
(in.)
C
11.00
11.00
11.00
11.00
14.00
15.00
18.00

D
36.00
42.00
42.00
42.00
60.00
60.00
72.00

E
39.00
44.00
44.00
44.00
61.50
61.50
74.00

F
24.25
24.25
24.25
28.00
32.75
39.00
48.25

H
5.00
5.00
5.00
5.00
6.00
9.00
9.00

J
2.50
2.50
2.50
2.50
3.50
4.50
5.00

K
3.50
3.50
3.50
3.50
4.00
5.00
6.25

L
10.88
10.88
10.88
10.88
15.00
18.50
19.75

M
7.94
7.94
7.94
7.94
12.75
17.00
21.25

Weight
Each
(lbs.)
5,600
7,050
7,150
7,800
16,100
21,800
38,500

* Additional wire rope sizes are available.

Copyright 2011 The Crosby Group LLC


All Rights Reserved

353

354
Tuesday, January
4, 2011
McBlock_English.fm Page 350 Wednesday,
November
24,4:09
2010PM
12:06 PM

McKissick Oilfield Servicing Blocks


SEE APPLICATION AND
WARNING INFORMATION
Para Espaol: www.thecrosbygroup.com
s k c o l B

g n i c i v r e S

d l e i f l i O

On Pages 358-365

k c i s s i K c M

GUY LINE BLOCKS

Guy Line Blocks


Used on guy-lines to gain mechanical advantage through rapid take-up, taking less pull to guy
down.
Laser burned steel side plates, cold-finished steel pins, 6" steel sheaves.
guy

Block
No.
458
458H
459
459H

No. of
Sheaves
1
1
2
2

Stock
No.
171619
239067
171637
239076

Working
Load Limit
(Tons)
5
8
10
12

Sheave
Diameter
(in.)
6
6
6
6

Standard
Wire Rope
Size
(in.)*
1/2
9/16 - 5/8
1/2
9/16 - 5/8

Weight
Each
(lbs.)
21
25
28
31

* May be furnished in other wire rope sizes.

458

459

354

Copyright 2011 The Crosby Group LLC.


All Rights Reserved

355
Tuesday, January
4, 2011
McBlock_English.fm Page 351 Wednesday,
November
24,4:24
2010PM
12:06 PM

McKissick Oilfield Servicing Blocks


SEE APPLICATION AND
WARNING INFORMATION
Para Espaol: www.thecrosbygroup.com
s k c o l B

g n i c i v r e S

d l e i f l i O

On Pages 358-365

k c i s s i K c M

ALL ALLOY

High Capacity Snatch Blocks

434
WITH
HOOK

Entire block made from heat treated alloy steel. Use of heat treated alloy gives block only 60% of
the weight of blocks of comparable capacities.
Available with bronze bushed sheaves.
Easy opening feature of "Champion" blocks retained.
Pressure lube fittings.
Can be furnished with hook latch.
Fatigue Rated.
Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor,
proof load and temperature requirements. Importantly, these blocks meet other critical
performance requirements including fatigue life, impact properties and material traceability, not
addressed by ASME B30.26.
All sizes are RFID EQUIPPED.

Stock No.
435
with
Shackle
168295
302568
208956
208965
302577
208974
302586
208983
302595
8027291

43

435
WITH SHACKLE

Sheave
Diameter
(in.)
8
8
10
10
10
12
12
14
14
12

Bearing
Code
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB

434
with
Hook
208894
302522
208901
208910
302531
208929
302540
208938
302559
-

401
Tail
Board
179149
302602
179158
179167
302611
179176
302620
179185
302639
8027292

Wire Rope
Size
(in.)
1
1-1/8
1
1-1/4
1-1/8
1
1-1/8
1
1-1/8
1-1/8

Working
Load Limit
(t)*
25
25
25
25
25
30
30
30
30
60

Weight Each
(lbs.)
434
435
with
with
Hook
Shackle
90
102
90
102
107
118
107
118
107
118
165
182
165
182
180
198
180
198
315

401
Tail
Board
50
50
65
65
65
95
95
110
110
160
McKissick
Blocks

* Ultimate Load is 4 times the Working Load Limit.


May be furnished in other rope sizes.
NOTE: When ordering, please specify: size, block number, hook or shackle, and wire rope size.
NOTE: Tail board does not contain the spool that is required with the hook (434) and shackle (435) snatch
blocks.

401
TAIL BOARD

For custom orders contact our Specials Sales Department or reference the special request form on page 435.

Copyright 2011 The Crosby Group LLC


All Rights Reserved

355

You might also like