You are on page 1of 2

Copier Bulletin: DIG-98

Date: 02/18/04
Page: 1 of 2

Models:

e-STUDIO 350 / 450

Subject:

PRINT/SCAN TRIAL OFFER

A Trial Period of the e-STUDIO350/450s print and scan capabilities is now being offered
to current users. The offer allows a one-time temporary activation of the systems print
and scan capabilities without the use of the enabler (GM-1010 for Print or GM-2010 for
Print and Scan).
The temporary activation is accomplished utilizing the following 08 codes:
08 Code 673 Trial Period Setting
This code simultaneously activates the trial period and sets its duration. The default
value is 254. This code can be set within the range of 1 to 60 days. The trial period starts
once this code is set: The number of days cannot be reset or changed. After this code
is set, the number of days remaining in the trial period will be displayed on the machines
Basic Ready screen.
08 Code 695 Notifying Condition of Trial Period End (future release)
If e-Mail capabilities are enabled on the machine, the setting value of this code will
determine when to send an e-Mail indicating the trial period is nearing its end. The
default is three days before the end of the trial period duration set with 08 code 673.
Refer to 08 code 798 below for assigning the destination(s) of the e-Mail.
08 Code 798 Notifying Address of Trial Period End (future release)
This code determines the destination(s) for the e-Mail generated by 08 code 695. The eMail can be sent either to the user, the dealer, or both, depending on the codes setting.
The available settings are:
0 OFF (do not send an e-Mail)
1 User
2 Service Center (dealer)
3 User and Service Center (default)

(more)
Copyright-2004 Toshiba America Business Solutions, Inc. (TABS). This publication contains proprietary and confidential information
retained for reference purpose by authorized TABS dealers. Unauthorized use of this information is prohibited. TABS makes no
express or implied warranty, including implied warranties of merchantability for a particular purpose, with regard to this technical
publication and disclaims any claim arising by reason of the possesion or use thereof.

Page 2 of 2

To enter the user e-Mail address, select User Functions / Admin / General / Notification.
To enter the Service Center e-Mail address, first enable the Service Notification. This is
accomplished with 08 code 774 (Display setting of Service Notification button). Details
regarding this feature are provided in Section 8 of the Service Handbook. After 08 code
774 is enabled, the Service Center e-Mail address can be entered by accessing User
Functions / Admin / Service Setting as described in Section 8 of the Service Handbook.
08 Code 799 Forcible End of Trial Period
Once this code was executed, the trial period set with 08 code 673 is terminated. This
code is used if it is necessary to terminate the trial period before the number of days
entered in 08 code 673 have elapsed.
The trial period cannot be reactivated.
Please take note of the following points regarding this feature:
1) This feature can only be activated one time and the duration cannot be extended.
2) For the e-Mail Notification of this feature to function, e-Mail needs to be configured
per the Network Administrators Guide.
(end)

You might also like