Professional Documents
Culture Documents
Eight red LED's separate input terminals. The LED will be lighted up when input is at "HI level",
and it will be turned off when it is at no input or at "LO level".
12. Universal connector fixed holder:
It reserves universal connector fixed holder on the panel in order to be connected with various
universal connectors as follows:
Standard accessory :
UC-06 Centronic connector
Optional accessories :
UC-01: Card edge connector 2.54 mm 62pin
UC-02: RS-232 connector 25pin D sub connector, male & female
UC-03: Straight header 60pin
UC-04: Card edge connector 3.96 mm 56pin
13. Other standard accessories:
- Power cord
- Pin: 6pcs
- User manual
14.Dimensions : 325 x 250 x 95 mm (L x W x H)
15.Weight : 4.3kg
Analog Overlay Learning System (Analog Trainer Module)
To assemble and examine experiment is laborious. OLS Series will condition the students to visualize
the function of experiment circuit. Electronic theory will be taught straightly out of book accordingly.
The main objective of this trainer is to teach the student of electronic circuits rather than focusing
on the assembly of the components.
Features
- The module overlay learning system allows the student to assemble even the most involved
circuit thus leaving enough time for fruitful experimentation.
- The module offering electronic template to guide students to an immediate and rational
experiment layout since symbols of tracing paper are same as those of traditional circuit diagram.
- The module analog overlay learning system is compatible with digital-analog Training System
Breadboard.
- No add-ons are required. A standardized set of all necessary components is included. The
thoroughly course software was designed by educators with over 20 years practical teaching
experience. However, the experiments are especially stressed on the theory. The professional
manual is referred to the most widely used theory books. The schematic diagrams component list
and procedure are clearly offered. Each experiment was tested prior to final editing.
- Moreover, the continuous hands-on exposure ensures the transfer of practical technical skills in
the minimum time.
Experiment contents
1. Semiconductor silicon diodes in DC circuits
2. Light emitting diode in DC circuits
3. Silicon diodes in AC circuits: half wave rectification
4. Silicon diodes in AC circuits: full wave rectification
5. The use of a diode bridge in DC circuits
6. The use of a diode bridge in AC circuits
7. Filtering and regulation of a pulsating DC voltage
8. An experimental power supply using a PI filter
9. Voltage multiplying using diodes & capacitors: voltage doubling
10. DC current gain of a common emitter transistor configuration
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
Standard Package
1. Circuit diagram (tracing paper): 28pcs
2. Experiment book: 1pc
3. Components: 1set
4. RM-203 breadboard: 1pc
5. Dimensions: 290 x 225 x 55mm (LxWxH)
6. Weight: 1,3kg
Digital Overlay Learning System (Digital Trainer Module)
To assemble and examine experiment is laborious. OLS Series will condition the students to visualize
the function of experiment circuit. Electronic theory will be taught straightly out of book accordingly.
The main objective of this trainer is to teach the student of electronic circuits rather than focusing
on the assembly of the components.
Features
- The module overlay learning system allows the student to assemble even the most involved
circuit thus leaving enough time for fruitful experimentation.
- The module overlay learning system is compatible digital-analog Training System Breadboard.
- No add-ons are required. A standardized set of all necessary components is included. The
thoroughly course software was designed by educators with over 20 years practical teaching
experience. However, the experiments are especially stressed on the theory. The professional
manual is referred to the most widely used theory books.
- The schematic diagrams component list and procedure are clearly offered. Each experiment was
tested prior to final editing. Moreover, the continuous hands-on exposure ensures the transfer of
practical technical skills in the minimum time.
Experiment contents
1. FE-01 basic logic function
2. FE-02 basic logic function
3. FE-03 basic logic function
4. FE-04 basic logic function
5. FE-05 Boolean Algebra and simplification of logic equation
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
Standard Package
1. Circuit diagram (tracing paper): 62pcs
2. Experiment book: 1pc
3. Components: 1set
4. RM-203 breadboard: 1pc
5. Dimensions: 290 x 225 x 55mm (L x W x H)
6. Weight: 1.4kg