Professional Documents
Culture Documents
DATA SHEET
Edition May 1998
Other applications:
On new roofs or reroofing (without removal of the
existing system): waterproofing on steel, timber and
plywood roof deck s.
SCOPE
COLOURED SELF FINISHED SINGLE LAYER
OF
APPLICATION MEMBRANE
WATERPROOFING
On the following structural elements:
Parafor Solo Profil A/G FM or FX
COMPOSITION
- for PARAFOR SOLO PROFIL FX :0,180kg/m 2
- Mineral protection on the upperface: 1.200 kg/m 2
(granules) or 0.900 kg/m2 (slate flakes).
- Tensile strength at break (N / 5 cm )............ 1200
- Elongation at first break ( UEAtc)( 3) ................ 4%
- Nail tearing resistance (UEAtc)(3).................> 400 N
- Cold bending (UEAtc)(3)............................... -20C
TECHNICAL
- Heat
stability (UEAtc) (3) ...(100 C/2
P Solo Profil P Solo
CHARACTERISTICS
h).......... 2 mm
A/G FM Profil FX
Dimensional
stabilit y
700
(UEAtc)(3)..................... 0.2%
4%
(3)
- Static puncture resistance.(UEAtc) L4.......> 25 kg
- Dynamic puncture resistance, D3..................> 20 J 300 N
-20C
By linear mechanical fixing at the overlap.
2 mm
The 120 mm overlap is fully bonded by torching.
0,2%
Mechanical fixings:
- Washer (40 mm x 40 mm SCR) and flat head 25 kg
> 20 J
INSTALLATION
s c r ews s u i t a ble for the stru c t u ral deck (self tapping,
self drilling screws type EVF for steel and wood panel)
from ETANCO, or similar.
- Washer (LR 80 x 40) and suitable screw type EG from
ACCESSORIES
ETANCO or similar.
- Plug with hammer in pin, type HEMA or similar, for
structural element of cellular concrete slabs.
Fire rating: for PARAFOR SOLO PROFIL A/G FM:
T30/1, french standard (CSTB n91.32421).
- Installation manual.
- Customs nomenclature: 68.07.10.10.0.00.0.A
- Colours: see Data Sheet "Colours on your roofs"
DESCRIPTION
- G, granules: FM = 42 kg, FX = 41 kg.
- A, slate flakes: FM = 40 kg, FX = 39 kg.
- Thickness at selvedge: 4 mm.
- Surfacing: mineral granules.
- Longitudinal overlap width 120 mm.
- Guidelines on the ove rlap strip for correct positioning
of the fixings.
- Scarification of the fusible film on the lapped joints
(parallel cut lines), Siplast patent
FIRE RATING
COMPLEMENTARY
INFORMATION
SAFETY :
Product not rated as dangerous (for the applications
described in the document).
(1)DTU = Documents Techniques Unifis (Unified Technical Documents, the French Code of Practice ).
(2) Delivered by CSTB - Centre Scientifique et Technique du Btiment (Building Scientifical and Technical Center, the French Institute member of UEAtc).
(3) UEAtc = Union Europenne pour l'Agrment Technique dans la Construction (European Union for Technical Agrement in the Construction).
This document is only a guide. SIPLAST reserves the right to change the composition and fixing recommendations of products as a result of the evolution of knowledge and technology.
12, rue Cabanis 75680 PARIS CEDEX 14 FRANCE. Tel.: 33 1 40 78 35 00 - Telex: 204 752 F - Fax: 33 1 45 88 56 87