You are on page 1of 5

MATERIAL SAFETY DATA SHEET

1.PRODUCT AND IDENTIFICATION


1). PRODUCT NAME: RUST VETO 342
2). APPLICATION: RUST PREVENTER
3). INFORMATION OF MANUFACTURER
Name of manufactures
:
Telephone / Fax numbers :
Address
Emergency contact
Completed by

KOREA HOUGHTON CO. LTD.

Tel) 02)3284-3300
Fax) 02)3284-33335
: 19th Floor, KSCFC Bldg 395-70 Shin Dae Bang-Dong, Dongjak-Ku, Seoul, Korea,
Yoido P.O. Box 185.
: Tel) 041) 541-83679
Fax) 041) 541-8387
: Kim Dongjin (1999. 12. 21)

2.COMPOSITION / INFORMATION ON INGREDIENTS


MATERIAL
Solvent
petroleum sulfonate wax

CAS. NO
8002-34-3
68425-34-3

%BY WT.
30-40
60-70

3. HAZARDS IDENTIFICATION
1) Emergency hazardous information : NFPA(0-4) : Health=1, Fire=2, Reactivity=0
2) Eye Contact : May cause a born.
3) Skin Contact : May cause a born.
4) Inhalation : Inhalation may cause irritability, nausea, central nervous system effects, dizziness,
and lung hemorrhage.
5) Ingestion : Ingestion of this product may cause a born, pyrexia, nausea, vomiting,
diarrhea, dyspnea, shock and lethargy.
6) Chronic State Symptom : No reference

4. FIRST-AID MEASURES
1) Eyes Contact
Throughly flush eyes with water for 1520 minutes
2) Skin Contact
Immediately wash with soap or soft cleaner / and plenty of water for 1520 minutes.
Obtain medical attention.
3) Inhalation
Immediately move victim to fresh air. Keep victim warm and comfortable. Call a physician.
4) Ingestion
If swallowed, do NOT induce vomiting or gastrolavage.
Never give anything by mouth to an unconscious person.
Protect a victim against obstruction of the airway.
Call a physician immediately.

5) Note
There is no special antidote

5. FIRE-FIGHTING MEASURES
1) Flash Point : 38
2) Natural Ignition Point : No reference
3) Lower Flash Limit / Upper Flash Limit : No reference
4) Classification and Regulation by Fire Service Act :
5) Extinguishing media
Use dry chemical, CO2, water spray or standard foam. In big fire, use water spray or fog or
standard foam.
6) Fire fighting Methods and Equipment
* Move containers from the fire zone if possible
* Cool the heated container with cold water spray in some distance as far as possible.
* Depending upon the fire source, use proper extinguishing media
* Use plenty of water in fog type.
* Don't inhalants the erodible vapor and stand in the back of wind direction.
7) Fire Cased hazardous Substance : Toxical phosphoric compounds may expose by heat.
8) Unsuitable Extinguishing Media : No reference

6. ACCIDENTAL RELEASE MEASURES


1) Body protection
use proper personal protective equipment as outlined in section 8.
2) Environmental protection
Block the released material. Use flash or cement powder to absorb liquid material.
Counteract released material with calcium hydroxide, sodium bicarbonate or shatter limestone.
3) Cleanup and removal in case material in released or spilled
Dontt contact with released material. Try to stop releasing if possible.
If the released amount is minor, absorb it with sand or other absorbent and place
in a container for the after-treatment. if the released amount is minor and dried,
place in a clean and dried container with a shovel and seal it then move to a safe area.
In case material is released in great amount, make a spot hill in some distance of back and
front of contaminated area and restrict the area.

7. HANDLING AND STORAGE


1) Handling
Provides suitable mechanical equipment for the easy drum handling.
Handle and open container with care. Avoid contact with skin and eyes.
2) Storage
Obey government and local laws and regulation.
Protect from physical damage. Store in a
cool and dry place. Use with adequate ventilation. Keep away from ignition source.
Keep separately from the material to be supposed having dangerous chemical reaction.

8. EXPOSURE CONTROLS/ PERSONAL PROTECTION

1) Engineering Controls
Use explosion-proof ventilation equipment to quality the standard explosion regulation.
2) Respiratory Protection :
Use appropriate respiratory protective equipment
3) Eye Protection
Use chemical splash goggles
4) Hand Protection
Use impermeable gloves
5) Body Protection
Use impermeable clothes and equipment
6) Exposure Regulation
No reference

9. PHYSICAL AND CHEMICAL PROPERTIES


1) Appearance : Amber liquid
2) Smell : Solvent
3) pH : Neutral
4) Sol. in water : insoluble
5) Boiling point/range : 40160
6) Melting point/range : No reference
7) Explosion : No reference
8) Acidity : No reference
9) Vapor pressure :0.341 (R.V.P @ 37.8)
10) Specific Gravity : 0.88 (15/4)
11) Division factor : No reference
12) Vapor density : No reference
13) Viscosity : 120-140 (40.0cSt)
14) Molecular weight : No reference

10. STABILITY AND REACTIVITY


1) Chemical stability : Stable
2) Conditions and material to avoid :
* Heat, Spark, and other ignition source
* Vapor may be explosive.
* Chloride, Fluoride, perchlorinated Mg, oxidants.
3) Hazardous decomposition : Toxical COx may be released
4) Hazardous substance creation upon reaction : No reference

11. TOXICOLOGICAL INFORMATION


1) Acute oral toxicity : normal toxicity.
2) Acute inhalation toxicity : No reference
3) Chronic toxicity : No information available
4) Nest generation effects(bio-toxicity) : No information available
5) Other note : No information available

12. ECOLOGICAL INFORMATION


No information available

13. DISPOSAL CONSIDERATION


Disposal must be in accordance with local and national legislation.
1) The product should be removed by approved waste contractors.
2) 200liter unlined steel drums may be returned for recycling.
All other packaging should be disposed of in a manner acceptable to the authorities
The container may contain combustible residues.

14. TRANSPORT INFORMATION


1) Classification for trans port : Not classified.
2) UN number : Not applicable
3) Packing group : Not applicable
4) Marine pollutant : No.
5) ICAO/IATA class : Not applicable

15. REGULATORY INFORMATION


1) Regulation by industrial Safety and Health Law : 23th, 24th, 26th and 27th.
2) Other Local Government Dept. Regulation regarding chemical management :
Not yet established
3) Foreign Regulation : SARA Section 313

16. OTHER INFORMATION


1) Information Source : Houghton International MSDS(USA)- Material Safety and Health Information
(Labor Department, Korea Industrial Safety Society, April)

You might also like