Professional Documents
Culture Documents
Homework 02
Fall 2016
Due on Mon. Sep. 12 at the EE Homework Slot outside of 121 EE East before 4:00 p.m.
For Problem 1, download the IRF HEXFET.xlsx file from ANGEL.
For Problem 2, download the IRF IGBT.xlsx file from ANGEL.
For Problem 3, download the datasheets for the IRG4PC30SPbF, IRG4PC30FPbF,
IRG4PC30UPbF, and IRG4PC30WPbF IGBTs from the International Rectifier web site
(www.irf.com).
1.
Pconduction I D2 RDS ( on )
For all devices in the family, the relationship between VBRDSS and RDS(on) can often be
modeled
a
RDS (on ) bVBRDSS
b.
c.
2.
Add four columns to the IRF HEXFET.xlsx spreadsheet to calculate the power
rating at TA 25 C , the power rating at TA 70C , the conduction loss at
TA 25 C , and the conduction loss at TA 70C for each of the six devices.
Determine the value of a for the family. Hint: determine the slope of the best line
fit to log(RDS(on)) vs log(VBRDSS).
Compare your result from Part b. (or the typical value of 2) to what one would
expect based on the Slides 8, 9, and 18 of the switch modeling lecture notes.
Each device in an IGBT family has a different value of continuous collector current IC
and switching speed but shares the same voltage rating and power dissipation rating.
a.
Sort the devices listed in IRF IGBT.xlsx worksheet by family.
b.
Describe the relationship between continuous collector current and switching
speed within each family.
3.
Augment the IRF IGBT.xlsx worksheet to compute the maximum switching frequency
f for each device in the IRG4PC30 family, if each device is operated at TJ 150 C
s
The waveforms plotted below show the voltage across and current through a particular
semiconductor device in a switch pole. Note that the minimum value of the voltage
waveform is actually 2.5 V rather than 0 V.
a.
Sketch the corresponding power waveform and indicate the value of its peak.
b.
Calculate the turn-on energy Wturn-on.
c.
Calculate the turn-on energy Wturn-off.
d.
Calculate the switching power loss.
e.
Calculate the conduction power loss.
5.
vS1 (V)
250
2.5 V
iS1 (A)
50
t (s)
pS1 (W)
t (s)
10
20
I C ( on ) 12 A
30
40
50
t (s)