Professional Documents
Culture Documents
usb usb
usb
usb 12V
When using first insert USB, and then plug the power supply.
When not in use, unplug the power supply and pull out the USB,
Don't get the order of the reverse, the computer shutdown is equivalent to pull out the USB.
Because the control chips using usb power supplyMotor and laser using 12V power supply,
If Control chip no power Laser has electricityLaser will lose control,Have a chance to laser damage
60
10
can not continuously work too long time, different files and settings fever is different, General engraving can
work for 60 minutesCutting can work for 10 minutestemperature is high should be the pauses to rest. Laser
severe fever also continue to work easy to damage.
driver installation
1. C++
1.Instal C++ libra
2. USB
2.installation for the USB Drive
3. net 2.0( XP )
3.installation net 2.0(Only the XP system needs to be installed)
control software
()image engrave
image engrave Is a picture engrave software, open the picture to engrave ,dot matrix printer,Laser head move around ,A line of points
the last full page image or text.
With a successful connection to the machine, we can can work the machine
Green is connected successfully, red is not connected
Start engraving , Pause engraving ,stop engraving
new
If check new, will only open a picture, don't check can add more pictures
Delete picture
All del
CheckAll delete all pictures, do not check to delete the current selected pictures
Keyboard del key can also delete the picture
Combined pictures, yellow numbers show the number of pictures
Picture processing
rotate
zoom
Flip
Change the gray to black
Add text
apply ok
Click apply to add but not close the window, you can continue to add, Click
manual control
...
Close laser Weak light...intense
:()()
:,,
Z :,.
:.
Scanning mode:(general use shortest path) (This parameter can only be modified before carving)
General: (row scanning)from left to right, then back to the left, from left to right
Z-shaped(z-style scannin): from left to right, then right to left.
The shortest path: according to the order of carving the shortest.
()
The rate of When engraving , speed is too fast will reduce the accuracy (This parameter can only be modified before carving)
: 50
()
Burn time:Unit millisecondThe time per pixel laser irradiation
Different power and different materials need to set different timeUsually no more than 50
(This parameter can be modified at any time in the process, it will take effect immediately)
255
15-20 1 1-2
2-4
1-2
1-2 1-2
:()
,100%0 , 100%
Laser intensity:The maximum power of laser engraving, the 255 is the largest, the 0 is the smallest.General use 100%
(This parameter can be modified at any time in the process, it will take effect immediately)
:()
,, 50
Stable delay:There is vibration, need to be stable after some delay to open laser,General use 50
(This parameter can only be modified before carving)
254DPI 10 =1
,. 339DPI
gcode cut is a vector cutting software, open the gcode file to be cut, and the picture is different from the
engraving, vector cutting is along the contour line. We usually use this mode to cut through the wood, paper
and other materials.
Start , Pause ,stop
: gcode
Cutting speed: the speed of movement of laser cutting, expressed in (mm \'s). This speed is also used to control the depth of the cutting,
for the specific laser intensity, the slower the speed, the greater the depth of the cut, Speed is too fast will reduce the accuracy
Laser intensity: the intensity of the laser beam to the surface of the material. For specific cutting speed,
the greater the intensity, the deeper the cutting.
Travel speed: positioning of the moving speed, speed is too fast will reduce the accuracy
Repeated number of times: the material can be cut through the repeated number of times repeated cutting
Focusing
(The new version of the focal length has been changed to 18mm)( 18mm)
()
()
In reflective, transparent, high temperature resistance,
with laser color similar to the color (blue) material
is difficult to engraving.But if it is painted black on the surface,
it is easy to engraving.Use the water-based marker pen to blacken,
finish engraving then erase Paper towel wipe clean
Inkscape(gcode)
download http://acanlaser.b0.upaiyun.com/inkscape.zip
install
inkscapegcode inkscape/share/extensions
Installation completed, Copy gcode all files to the installation directory under
inkscape/share/extensions directory
the
Can also Convert bitmap into vector
XnSketch()
(Tun the picture into black and white sketch effect)
XnSketch.exe
open XnSketch.exe
common problem :
1 No trace of engraving