Scribd Logo
Upload

Welcome to Scribd!

  • SAP2000 Database Documentation Hyper-Linked Contents

    Uploaded by

    Andres Felipe Forero
    109 views5,083 pages
    This document provides a hyperlinked table of contents for the SAP2000 database documentation. It lists over 80 sections that describe different aspects of the database including analysis options, load cases, material properties, section assignments, design code parameters, and more. The sections cover general modeling information, automatic load generation, bridge design requirements, and other topics related to building and analyzing models in SAP2000.

    Original Description:

    Original Title

    VIGA LONG.rtf

    Copyright

    © © All Rights Reserved

    Available Formats

    RTF, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    This document provides a hyperlinked table of contents for the SAP2000 database documentation. It lists over 80 sections that describe different aspects of the database including analysis options, load cases, material properties, section assignments, design code parameters, and more. The sections cover general modeling information, automatic load generation, bridge design requirements, and other topics related to building and analyzing models in SAP2000.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    109 views5,083 pages

    SAP2000 Database Documentation Hyper-Linked Contents

    Uploaded by

    Andres Felipe Forero
    This document provides a hyperlinked table of contents for the SAP2000 database documentation. It lists over 80 sections that describe different aspects of the database including analysis options, load cases, material properties, section assignments, design code parameters, and more. The sections cover general modeling information, automatic load generation, bridge design requirements, and other topics related to building and analyzing models in SAP2000.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Hyper-Linked Contents
    Active Degrees of Freedom
    Analysis Options
    Area Added Mass Assignments
    Area Auto Mesh Assignments
    Area Bridge Object Flags
    Area Edge Constraint Assignments
    Area Loads - Gravity
    Area Loads - Pore Pressure
    Area Loads - Rotate
    Area Loads - Strain
    Area Loads - Surface Pressure
    Area Loads - Temperature
    Area Loads - Uniform
    Area Loads - Uniform To Frame
    Area Loads - Wind Pressure Coefficients
    Area Local Axes Assignments 1 - Typical
    Area Local Axes Assignments 2 - Advanced
    Area Material Temperatures
    Area Overwrites - Joint Offsets
    Area Overwrites - Thickness
    Area Section Assignments
    Area Section Properties
    Area Section Property Design Parameters
    Area Section Property Layers
    Area Section Properties - Bridge Object Flags
    Area Spring Assignments
    Area Stiffness Modifiers
    Area Stiffness Modifier Definitions
    Area Vehicle Response Component Overwrites
    Auto Combination Option Data 01 - General
    Auto Combination Option Data 02 - User Data
    Auto Combination Option Parameters for AASHTO STD 2002
    Auto Combination Option Parameters for AASHTO LRFD 2007
    Auto Combination Option Parameters for Chinese JTG
    Auto Seastate
    Auto Seismic - AS 1170 2007
    Auto Seismic - BOCA96
    Auto Seismic - Chinese 2010
    Auto Seismic - Eurocode8 2004
    Auto Seismic - IBC2003
    Auto Seismic - IBC2006
    Auto Seismic - IBC2009
    Auto Seismic - IBC2012
    Auto Seismic - IS1893:2002
    Auto Seismic - ITALIAN NTC 2008
    Auto Seismic - NBCC 2010
    Auto Seismic - NBCC 2005
    Page 1 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Auto Seismic - NBCC95


    Auto Seismic - NEHRP97
    Auto Seismic - NZS 1170 2004
    Auto Seismic - TSC 2007
    Auto Seismic - UBC94
    Auto Seismic - UBC97
    Auto Seismic - UBC97 Isolated
    Auto Seismic - User Coefficient
    Auto Seismic - User Loads
    Auto Seismic Eccentricity Overrides
    Auto Seismic Loads To Groups
    Auto Seismic Loads To Horizontal Diaphragms
    Auto Seismic Loads To Joints
    Auto Wave 1 - General
    Auto Wave 2 - Tabular Display
    Auto Wave 3 - Wave Characteristics - General
    Auto Wave 4 - Wave Characteristics - User Horizontal Coordinates
    Auto Wave 5 - Wave Characteristics - User Vertical Coordinates
    Auto Wave 6 - Wave Characteristics - User Wave Data
    Auto Wave 7 - Current Profile
    Auto Wave 8 - Marine Growth
    Auto Wave 9 - Drag And Inertia Coefficients
    Auto Wave 10 - Wave Wind Loads
    Auto Wind - API 4F
    Auto Wind - ASCE7-88
    Auto Wind - ASCE7-95
    Auto Wind - ASCE7-02
    Auto Wind - ASCE7-05
    Auto Wind - ASCE7-10
    Auto Wind - AS-NZS 1170 2 2002
    Auto Wind - AS-NZS 1170 2 2011
    Auto Wind - BOCA96
    Auto Wind - BS6399-95
    Auto Wind - Chinese 2010
    Auto Wind - Eurocode1 2005
    Auto Wind - IS875-1987
    Auto Wind - ITALIAN NTC 2008
    Auto Wind - Mexican
    Auto Wind - NBCC 2010
    Auto Wind - NBCC 2005
    Auto Wind - NBCC95
    Auto Wind - TS 498-97
    Auto Wind - UBC94
    Auto Wind - UBC97
    Auto Wind - User
    Auto Wind Exposure For Horizontal Diaphragms
    Auto Wind Loads To Groups
    Auto Wind Loads To Horizontal Diaphragms
    Auto Wind Loads To Joints
    Bridge Design Preferences - JTG-D62-2004
    Bridge Design Preferences - EUROCODE
    Page 2 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Bridge Design Preferences - IRC-2011


    Bridge Seismic Design Preferences - AASHTO Seismic 2011
    Bridge Seismic Design Preferences - JTG/T B02-01 2008
    Bridge DesReqSeismic 01 - General
    Bridge DesReqSeismic 01a - Loading - Uniform
    Bridge DesReqSeismic 01b - Loading - Fault Crossing - Planar
    Bridge DesReqSeismic 01c - Loading - Fault Crossing - General
    Bridge DesReqSeismic 02 - Gravity Load Case
    Bridge DesReqSeismic 03 - Modal And RS Load Cases
    Bridge DesReqSeismic 04 - Pushover Load Case
    Bridge DesReqSuper 01 - General
    Bridge DesReqSuper 02 - Station Ranges
    Bridge DesReqSuper 03 - Demand Sets
    Bridge DesReqSuper 05 - Param - AASHTOSTD02 - CBoxStress
    Bridge DesReqSuper 06 - Demand - AASHTOSTD02 - CBoxStress
    Bridge DesReqSuper 04 - LLDF - AASHTOLRFD07
    Bridge DesReqSuper 05 - Param - AASHTOLRFD07 - CBoxStress
    Bridge DesReqSuper 06 - Param - AASHTOLRFD07 - CBoxShear
    Bridge DesReqSuper 07 - Param - AASHTOLRFD07 - CBoxFlexure
    Bridge DesReqSuper 08 - Param - AASHTOLRFD07 - CBoxPrinc
    Bridge DesReqSuper 09 - Param - AASHTOLRFD07 - CBox2Stress
    Bridge DesReqSuper 10 - Param - AASHTOLRFD07 - CBox2Shear
    Bridge DesReqSuper 11 - Param - AASHTOLRFD07 - CBox2Flexure
    Bridge DesReqSuper 12 - Param - AASHTOLRFD07 - PCCompStress
    Bridge DesReqSuper 13 - Param - AASHTOLRFD07 - PCCompShear
    Bridge DesReqSuper 14 - Param - AASHTOLRFD07 - PCCompFlexure
    Bridge DesReqSuper 15 - Param - AASHTOLRFD07 - SteelICompStrgth
    Bridge DesReqSuper 16 - Param - AASHTOLRFD07 - SteelICompService
    Bridge DesReqSuper 17 - Param - AASHTOLRFD07 - SteelICompCtrStg
    Bridge DesReqSuper 18 - Param - AASHTOLRFD07 - SteelICompCtrNStg
    Bridge DesReqSuper 04 - LLDF - AASHTOLRFD12
    Bridge DesReqSuper 05 - Param - AASHTOLRFD12 - CBoxStress
    Bridge DesReqSuper 06 - Param - AASHTOLRFD12 - CBoxShear
    Bridge DesReqSuper 07 - Param - AASHTOLRFD12 - CBoxFlexure
    Bridge DesReqSuper 08 - Param - AASHTOLRFD12 - CBoxPrinc
    Bridge DesReqSuper 09 - Param - AASHTOLRFD12 - CBox2Stress
    Bridge DesReqSuper 10 - Param - AASHTOLRFD12 - CBox2Shear
    Bridge DesReqSuper 11 - Param - AASHTOLRFD12 - CBox2Flexure
    Bridge DesReqSuper 12 - Param - AASHTOLRFD12 - PCCompStress
    Bridge DesReqSuper 13 - Param - AASHTOLRFD12 - PCCompShear
    Bridge DesReqSuper 14 - Param - AASHTOLRFD12 - PCCompFlexure
    Bridge DesReqSuper 15 - Param - AASHTOLRFD12 - SteelICompStrgth
    Bridge DesReqSuper 16 - Param - AASHTOLRFD12 - SteelICompService
    Bridge DesReqSuper 17 - Param - AASHTOLRFD12 - SteelICompCtrStg
    Bridge DesReqSuper 18 - Param - AASHTOLRFD12 - SteelICompCtrNStg
    Bridge DesReqSuper 19 - Param - AASHTOLRFD12 - SteelUCompStrgth
    Bridge DesReqSuper 20 - Param - AASHTOLRFD12 - SteelUCompService
    Bridge DesReqSuper 21 - Param - AASHTOLRFD12 - SteelUCompCtrStg
    Bridge DesReqSuper 22 - Param - AASHTOLRFD12 - SteelUCompCtrNStg
    Bridge DesReqSuper 05 - Param - JTG-D62-2004 - CBoxStress
    Bridge DesReqSuper 06 - Param - JTG-D62-2004 - CBoxCrkStress
    Page 3 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Bridge DesReqSuper 07 - Param - JTG-D62-2004 - CBoxFlexure


    Bridge DesReqSuper 08 - Param - JTG-D62-2004 - CBoxShear
    Bridge DesReqSuper 09 - Param - JTG-D62-2004 - CBoxPrinc
    Bridge DesReqSuper 10 - Param - JTG-D62-2004 - CBoxCrkPrinc
    Bridge DesReqSuper 11 - Param - JTG-D62-2004 - CBoxTendonStress
    Bridge DesReqSuper 12 - Param - JTG-D62-2004 - CBoxCrackWidth
    Bridge DesReqSuper 04 - LLDF - CANCSAS606
    Bridge DesReqSuper 05 - Param - CANCSAS606 - CBoxStress
    Bridge DesReqSuper 06 - Param - CANCSAS606 - CBoxShear
    Bridge DesReqSuper 07 - Param - CANCSAS606 - CBoxFlexure
    Bridge DesReqSuper 08 - Param - CANCSAS606 - CBox2Stress
    Bridge DesReqSuper 09 - Param - CANCSAS606 - CBox2Shear
    Bridge DesReqSuper 10 - Param - CANCSAS606 - CBox2Flexure
    Bridge DesReqSuper 11 - Param - CANCSAS606 - PCCompStress
    Bridge DesReqSuper 12 - Param - CANCSAS606 - PCCompShear
    Bridge DesReqSuper 13 - Param - CANCSAS606 - PCCompFlexure
    Bridge DesReqSuper 14 - Param - CANCSAS606 - SteelICompStrgth
    Bridge DesReqSuper 15 - Param - CANCSAS606 - SteelICompService
    Bridge DesReqSuper 16 - Param - CANCSAS606 - SteelICompCtrStg
    Bridge DesReqSuper 17 - Param - CANCSAS606 - SteelICompCtrNStg
    Bridge DesReqSuper 04 - LLDF - EUROCODE
    Bridge DesReqSuper 05 - Param - EUROCODE - CBoxStress
    Bridge DesReqSuper 06 - Param - EUROCODE - CBoxShear
    Bridge DesReqSuper 07 - Param - EUROCODE - CBoxFlexure
    Bridge DesReqSuper 08 - Param - EUROCODE - CBox2Stress
    Bridge DesReqSuper 09 - Param - EUROCODE - CBox2Shear
    Bridge DesReqSuper 10 - Param - EUROCODE - CBox2Flexure
    Bridge DesReqSuper 11 - Param - EUROCODE - PCCompStress
    Bridge DesReqSuper 12 - Param - EUROCODE - PCCompShear
    Bridge DesReqSuper 13 - Param - EUROCODE - PCCompFlexure
    Bridge DesReqSuper 14 - Param - EUROCODE - SteelICompUltimate
    Bridge DesReqSuper 15 - Param - EUROCODE - SteelICompServStr
    Bridge DesReqSuper 16 - Param - EUROCODE - SteelICompServRebar
    Bridge DesReqSuper 17 - Param - EUROCODE - SteelICompCtrStg
    Bridge DesReqSuper 18 - Param - EUROCODE - SteelICompCtrNStg
    Bridge DesReqSuper 04 - LLDF - IRC-2011
    Bridge DesReqSuper 05 - Param - IRC-112-2011 - CBoxStress
    Bridge DesReqSuper 06 - Param - IRC-112-2011 - CBoxShear
    Bridge DesReqSuper 07 - Param - IRC-112-2011 - CBoxFlexure
    Bridge DesReqSuper 08 - Param - IRC-112-2011 - CBox2Stress
    Bridge DesReqSuper 09 - Param - IRC-112-2011 - CBox2Shear
    Bridge DesReqSuper 10 - Param - IRC-112-2011 - CBox2Flexure
    Bridge DesReqSuper 11 - Param - IRC-112-2011 - PCCompStress
    Bridge DesReqSuper 12 - Param - IRC-112-2011 - PCCompShear
    Bridge DesReqSuper 13 - Param - IRC-112-2011 - PCCompFlexure
    Bridge RateReqSuper 01 - General
    Bridge RateReqSuper 02 - Station Ranges
    Bridge RateReqSuper 03 - Demand Sets
    Bridge RateReqSuper 04 - Param - AASHTOLRFD07 - CBoxShear
    Bridge RateReqSuper 05 - Param - AASHTOLRFD07 - CBoxFlexure
    Bridge RateReqSuper 06 - Param - AASHTOLRFD07 - CBoxMinRebar
    Page 4 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Bridge RateReqSuper 07 - Param - AASHTOLRFD07 - CBox2Shear


    Bridge RateReqSuper 08 - Param - AASHTOLRFD07 - CBox2Flexure
    Bridge RateReqSuper 09 - Param - AASHTOLRFD07 - CBox2MinRebar
    Bridge RateReqSuper 10 - Param - AASHTOLRFD07 - PCCompShear
    Bridge RateReqSuper 11 - Param - AASHTOLRFD07 - PCCompFlexure
    Bridge RateReqSuper 12 - Param - AASHTOLRFD07 - PCCompMinRebar
    Bridge RateReqSuper 13 - Param - AASHTOLRFD07 - StINonCompStrgth
    Bridge RateReqSuper 14 - Param - AASHTOLRFD07 - StINonCompServ
    Bridge RateReqSuper 15 - Param - AASHTOLRFD07 - StICompStrgth
    Bridge RateReqSuper 16 - Param - AASHTOLRFD07 - StICompServ
    Bridge RateReqSuper 04 - Param - AASHTORATE11 - CBoxShear
    Bridge RateReqSuper 05 - Param - AASHTORATE11 - CBoxFlexure
    Bridge RateReqSuper 06 - Param - AASHTORATE11 - CBoxMinRebar
    Bridge RateReqSuper 07 - Param - AASHTORATE11 - CBox2Shear
    Bridge RateReqSuper 08 - Param - AASHTORATE11 - CBox2Flexure
    Bridge RateReqSuper 09 - Param - AASHTORATE11 - CBox2MinRebar
    Bridge RateReqSuper 10 - Param - AASHTORATE11 - PCCompShear
    Bridge RateReqSuper 11 - Param - AASHTORATE11 - PCCompFlexure
    Bridge RateReqSuper 12 - Param - AASHTORATE11 - PCCompMinRebar
    Bridge RateReqSuper 13 - Param - AASHTORATE11 - StINonCompStrgth
    Bridge RateReqSuper 14 - Param - AASHTORATE11 - StINonCompServ
    Bridge RateReqSuper 15 - Param - AASHTORATE11 - StICompStrgth
    Bridge RateReqSuper 16 - Param - AASHTORATE11 - StICompServ
    Bridge Abutment Definitions
    Bridge Bearing Definitions
    Bridge Bent Definitions 1 - General
    Bridge Bent Definitions 2 - Column Data
    Bridge Diaphragm Definitions
    Bridge Foundation Spring Definitions
    Bridge Layout Line 1 - General
    Bridge Layout Line 2 - Horizontal Layout Data
    Bridge Layout Line 3 - Vertical Layout Data
    Bridge Layout Line 4 - Layout Line Points
    Bridge Load Definitions 01 - Point
    Bridge Load Definitions 02 - Line
    Bridge Load Definitions 03 - Area
    Bridge Model Summary 01 - Bearing Supports
    Bridge Object Definitions 01 - General
    Bridge Object Definitions 02 - Reference Line
    Bridge Object Definitions 03 - Spans 1 - General
    Bridge Object Definitions 04 - Spans 2 - Parametric Variations
    Bridge Object Definitions 05 - Spans 3 - User Variations
    Bridge Object Definitions 06 - Abutments
    Bridge Object Definitions 07 - Bents
    Bridge Object Definitions 08 - Hinges
    Bridge Object Definitions 09 - Super Elevation 1 - General
    Bridge Object Definitions 10 - Super Elevation 2 - User
    Bridge Object Definitions 11 - Prestress 1 - General
    Bridge Object Definitions 12 - Prestress 2 - Vertical Layout
    Bridge Object Definitions 13 - Prestress 3 - Horizontal Layout
    Bridge Object Definitions 14 - Diaphragms
    Page 5 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Bridge Object Definitions 15 - Update Data


    Bridge Object Definitions 16 - Discretization Points
    Bridge Object Definitions 17 - Abutment Overwrites
    Bridge Object Definitions 18 - Bent Bearing Overwrites
    Bridge Object Definitions 19 - Bent Superstructure Overwrites
    Bridge Object Definitions 20 - Hinge Overwrites
    Bridge Object Definitions 21 - Temperature Loads
    Bridge Object Definitions 22 - Girder Rebar 1 - General
    Bridge Object Definitions 23 - Girder Rebar 2 - Transverse
    Bridge Object Definitions 24 - Girder Rebar 3 - Longitudinal
    Bridge Object Definitions 25 - Point Loads
    Bridge Object Definitions 26 - Line Loads
    Bridge Object Definitions 27 - Area Loads
    Bridge Parametric Variation Definitions
    Bridge Preferences
    Bridge Response
    Bridge Restrainer Definitions
    Bridge Section Cuts 01 - General
    Bridge Section Cuts 02 - Groups
    Bridge Section Cuts 03 - Stress Points
    Bridge Section Cuts 04 - Girder Data - General
    Bridge Section Cuts 05 - Girder Data - Groups
    Bridge Group Definition 01 - General
    Bridge Group Definition 02 - Section
    Bridge Group Definition 03 - Top Slab
    Bridge Group Definition 04 - Web
    Bridge Group Definition 05 - Beam
    Bridge Group Definition 06 - Bottom Slab
    Bridge Group Definition 07 - Diaphragm
    Bridge Group Definition 08 - Support Structure
    Bridge Group Definition 09 - Bearing - Support
    Bridge Group Definition 10 - Bearing - Hinge
    Bridge Group Definition 11 - Restrainer - Support
    Bridge Group Definition 12 - Restrainer - Hinge
    Bridge Group Definition 13 - Tendon
    Bridge Group Definition 14 - Mixed
    Bridge Section Definitions 02 - Concrete Box Girder
    Bridge Section Definitions 03 - Concrete Tee Beam
    Bridge Section Definitions 04 - Concrete Flat Slab
    Bridge Section Definitions 05 - Steel I Girders 1 - General
    Bridge Section Definitions 06 - Steel I Girders 2 - Spacing
    Bridge Section Definitions 07 - Steel I Girders 3 - Haunches
    Bridge Section Definitions 08 - Steel I Girders 4 - Sections
    Bridge Section Definitions 09 - PCC I Girders 1 - General
    Bridge Section Definitions 10 - PCC I Girders 2 - Spacing
    Bridge Section Definitions 11 - PCC I Girders 3 - Haunches
    Bridge Section Definitions 12 - PCC I Girders 4 - Sections
    Bridge Section Definitions 13 - PCC U Girders 1 - General
    Bridge Section Definitions 14 - PCC U Girders 2 - Spacing
    Bridge Section Definitions 15 - PCC U Girders 3 - Haunches
    Bridge Section Definitions 16 - PCC U Girders 4 - Sections
    Page 6 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Bridge Section Definitions 17 - Adv Box Gird 1 - General


    Bridge Section Definitions 18 - Adv Box Gird 2 - Girder Spacing
    Bridge Section Definitions 19 - Adv Box Gird 3 - Exterior Girder
    Bridge Section Definitions 20 - Adv Box Gird 4 - Interior Girder
    Bridge Section Definitions 21 - Adv Box Gird 5 - Slab Thickness
    Bridge Section Definitions 22 - Steel U Girders 1 - General
    Bridge Section Definitions 23 - Steel U Girders 2 - Spacing
    Bridge Section Definitions 24 - Steel U Girders 3 - Haunches
    Bridge Section Definitions 25 - Steel U Girders 4 - Sections
    Bridge Section Definitions 26 - Steel U Girders 5 - Bracings
    Bridge Section Definitions - Girder Output Location Data
    Bridge Temperature Gradient Definitions 01 - General
    Bridge Temperature Gradient Definitions 02 - User Distances
    Bridge Temperature Gradient Definitions 03 - User Temperatures
    Cable Added Mass Assignments
    Cable Insertion Point Assignments
    Cable Loads - Deformation
    Cable Loads - Distributed
    Cable Loads - Gravity
    Cable Loads - Strain
    Cable Loads - Target Force
    Cable Loads - Temperature
    Cable Material Temperatures
    Cable Output Station Assignments
    Cable Property Modifiers
    Cable Property Modifier Definitions
    Cable Section Assignments
    Cable Section Definitions
    Cable Shape Data
    Cable Vehicle Response Component Overwrites
    Case - Buckling 1 - General
    Case - Buckling 2 - Load Assignments
    Case - Direct History 1 - General
    Case - Direct History 2 - Load Assignments
    Case - Direct History 3 - Proportional Damping
    Case - Direct History 4 - Integration Parameters
    Case - Direct History 5 - Nonlinear Parameters
    Case - Frequency History 1 - General
    Case - Frequency History 2 - Load Assignments
    Case - Frequency History 3 - Constant Damping
    Case - Frequency History 4 - Interpolated Damping
    Case - Frequency History 5 - Integration Parameters
    Case - Modal 1 - General
    Case - Modal 2 - Load Assignments - Eigen
    Case - Modal 3 - Load Assignments - Ritz
    Case - Modal History 1 - General
    Case - Modal History 2 - Load Assignments
    Case - Modal History 3 - Interpolated Damping
    Case - Modal History 4 - Proportional Damping
    Case - Modal History 5 - Damping Overrides
    Case - Modal History 6 - Nonlinear Parameters
    Page 7 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Case - Moving Load 1 - Lane Assignments


    Case - Moving Load 2 - Lanes Loaded
    Case - Moving Load 3 - MultiLane Factors
    Case - Multistep Static 1 - Load Assignments
    Case - Power Spectral Density 1 - General
    Case - Power Spectral Density 2 - Load Assignments
    Case - Power Spectral Density 3 - Added Frequencies General
    Case - Power Spectral Density 4 - Added Frequency Deviations
    Case - Power Spectral Density 5 - Added Specified Frequencies
    Case - Power Spectral Density 6 - Constant Damping
    Case - Power Spectral Density 7 - Interpolated Damping
    Case - Response Spectrum 1 - General
    Case - Response Spectrum 2 - Load Assignments
    Case - Response Spectrum 3 - Interpolated Damping
    Case - Response Spectrum 4 - Proportional Damping
    Case - Response Spectrum 5 - Damping Overrides
    Case - Response Spectrum 6 - Eccentricity Overrides
    Case - Static 1 - Load Assignments
    Case - Static 2 - Nonlinear Load Application
    Case - Static 4 - Nonlinear Parameters
    Case - Static 5 - Nonlinear Stage Definitions
    Case - Static 6 - Nonlinear Stage Data
    Case - Steady State 1 - General
    Case - Steady State 2 - Load Assignments
    Case - Steady State 3 - Added Frequencies General
    Case - Steady State 4 - Added Frequency Deviations
    Case - Steady State 5 - Added Specified Frequencies
    Case - Steady State 6 - Constant Damping
    Case - Steady State 7 - Interpolated Damping
    Combination Definitions
    Connectivity - Area
    Connectivity - Cable
    Connectivity - Frame
    Connectivity - Link
    Connectivity - Solid
    Connectivity - Tendon
    Constraint Definitions - Beam
    Constraint Definitions - Body
    Constraint Definitions - Bridge Object Flags
    Constraint Definitions - Diaphragm
    Constraint Definitions - Equal
    Constraint Definitions - Line
    Constraint Definitions - Local
    Constraint Definitions - Plate
    Constraint Definitions - Rod
    Constraint Definitions - Weld
    Coordinate Systems
    Database Documentation
    Database Field Names
    Database Format Types
    Database Table Names
    Page 8 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Frame Added Mass Assignments


    Frame Auto Mesh Assignments
    Frame Bridge Object Flags
    Frame Curve Data
    Frame Design Bracing - Point
    Frame Design Bracing - Uniform
    Frame Design Procedures
    Frame End Skew Angle Assignments
    Frame Fireproofing Assignments
    Frame Hinge Assigns 01 - Overview
    Frame Hinge Assigns 02 - User Defined Properties
    Frame Hinge Assigns 03 - Auto Caltrans - Flexural Hinge
    Frame Hinge Assigns 04 - Auto FEMA 356 - Concrete Beam
    Frame Hinge Assigns 05 - Auto FEMA 356 - Concrete Column
    Frame Hinge Assigns 06 - Auto FEMA 356 - Steel Beam
    Frame Hinge Assigns 07 - Auto FEMA 356 - Steel Column
    Frame Hinge Assigns 08 - Auto FEMA 356 - Steel Brace
    Frame Hinge Assigns 09 - Hinge Overwrites
    Frame Insertion Point Assignments
    Frame Joint Offsets - Bridge Object Flags
    Frame Loads - Deformation
    Frame Loads - Distributed
    Frame Loads - Gravity
    Frame Loads - Open Structure Wind
    Frame Loads - Point
    Frame Loads - Strain
    Frame Loads - Target Force
    Frame Loads - Temperature
    Frame Load Transfer Options
    Frame Local Axes Assignments 1 - Typical
    Frame Local Axes Assignments 2 - Advanced
    Frame Material Temperatures
    Frame Offset Along Length Assignments
    Frame Output Station Assignments
    Frame P-Delta Force Assignments
    Frame Property Modifiers
    Frame Property Modifier Definitions
    Frame Release Assignments 1 - General
    Frame Release Assignments 2 - Partial Fixity
    Frame Release Definitions
    Frame Section Assignments
    Frame Section Properties 01 - General
    Frame Section Properties 02 - Concrete Column
    Frame Section Properties 03 - Concrete Beam
    Frame Section Properties 04 - Auto Select
    Frame Section Properties 05 - Nonprismatic
    Frame Section Properties 06 - Polygon Data
    Frame Section Properties 07 - Built Up I
    Frame Section Properties 08 - PCC I Girder
    Frame Section Properties 09 - PCC U Girder
    Frame Section Properties 10 - Steel Joist General
    Page 9 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Frame Section Properties 11 - Steel Joist Data


    Frame Section Properties 12 - Hybrid Steel U Section
    Frame Section Properties - Bridge Object Flags
    Frame Spring Assignments
    Frame Tension And Compression Limits
    Frame Vehicle Response Component Overwrites
    Function - Plot Functions
    Function - Power Spectral Density - From File
    Function - Power Spectral Density - User
    Function - Response Spectrum - AASHTO 2006
    Function - Response Spectrum - AASHTO 2007
    Function - Response Spectrum - AASHTO 2012
    Function - Response Spectrum - AS 1170 2007
    Function - Response Spectrum - BOCA96
    Function - Response Spectrum - Chinese 2010
    Function - Response Spectrum - GB501112006
    Function - Response Spectrum - JTGTB0201
    Function - Response Spectrum - EuroCode8
    Function - Response Spectrum - EuroCode8 2004
    Function - Response Spectrum - From File
    Function - Response Spectrum - IBC2003
    Function - Response Spectrum - IBC2006
    Function - Response Spectrum - IBC2009
    Function - Response Spectrum - IBC2012
    Function - Response Spectrum - IS1893:2002
    Function - Response Spectrum - Italian 3274
    Function - Response Spectrum - Italian NTC 2008
    Function - Response Spectrum - NBCC 2010
    Function - Response Spectrum - NBCC 2005
    Function - Response Spectrum - NBCC95
    Function - Response Spectrum - NCHRP 20-07
    Function - Response Spectrum - NEHRP97
    Function - Response Spectrum - NZS 1170 2004
    Function - Response Spectrum - NZS4203
    Function - Response Spectrum - TSC-2007
    Function - Response Spectrum - UBC94
    Function - Response Spectrum - UBC97
    Function - Response Spectrum - User
    Function - Steady State - From File
    Function - Steady State - User
    Function - Time History - Cosine
    Function - Time History - From File
    Function - Time History - Ramp
    Function - Time History - Sawtooth
    Function - Time History - Sine
    Function - Time History - Triangular
    Function - Time History - User
    Function - Time History - User Periodic
    General Grids
    Generalized Displacement Definitions 1 - Translational
    Generalized Displacement Definitions 2 - Rotational
    Page 10 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    General Reference Line 01 - General


    General Reference Line 02 - Plan Points
    General Reference Line 03 - Elevation Points
    General Reference Line 04 - Discretized Coordinates
    Grid Lines
    Groups 1 - Definitions
    Groups 2 - Assignments
    Groups 3 - Masses and Weights
    Groups 4 - Bridge Object Flags
    Hinges Def 01 - Overview
    Hinges Def 02 - Noninteracting - Deform Control - General
    Hinges Def 03 - Noninteracting - Deform Control - Force-Deform
    Hinges Def 04 - Noninteracting - Deform Control - Acceptance
    Hinges Def 05 - Noninteracting - Force Control
    Hinges Def 06 - Interacting - Deform Control - General
    Hinges Def 07 - Interacting - Deform Control - Fs and Angs
    Hinges Def 08 - Interacting - Deform Control - Force-Deform
    Hinges Def 09 - Interacting - Deform Control - Acceptance
    Hinges Def 10 - Interacting - Force Control
    Hinges Def 11 - Interacting - Interaction Surface - General
    Hinges Def 12 - Interacting - Interaction Surface - Data
    Hinges Def 13 - Fiber - General
    Hinges Def 14 - Fiber - Fiber Data
    Hinges Gen 01 - Overview
    Hinges Gen 02 - Noninteracting - Deform Control - General
    Hinges Gen 03 - Noninteracting - Deform Control - Force-Deform
    Hinges Gen 04 - Noninteracting - Deform Control - Acceptance
    Hinges Gen 05 - Noninteracting - Force Control
    Hinges Gen 06 - Interacting - Deform Control - General
    Hinges Gen 07 - Interacting - Deform Control - Fs and Angs
    Hinges Gen 08 - Interacting - Deform Control - Force-Deform
    Hinges Gen 09 - Interacting - Deform Control - Acceptance
    Hinges Gen 10 - Interacting - Force Control
    Hinges Gen 11 - Interacting - Interaction Surface - General
    Hinges Gen 12 - Interacting - Interaction Surface - Data
    Hinges Gen 13 - Fiber - General
    Hinges Gen 14 - Fiber - Fiber Data
    Joint Added Mass Assignments
    Joint Added Mass By Weight Assignments
    Joint Added Mass By Volume Assignments
    Joint Bridge Object Flags
    Joint Constraint Assignments
    Joint Coordinates
    Joint Loads - Force
    Joint Loads - Ground Displacement
    Joint Local Axes Assignments 1 - Typical
    Joint Local Axes Assignments 2 - Advanced
    Joint Merge Number Assignments
    Joint Panel Zone Assignments
    Joint Pattern Assignments
    Joint Pattern Definitions
    Page 11 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Joint Punching Load Assignments


    Joint Restraint Assignments
    Joint Spring Assignments 1 - Uncoupled
    Joint Spring Assignments 2 - Coupled
    Joint Vehicle Response Component Overwrites
    Lane Centerline Points
    Lane Definition Data
    Link Bridge Object Flags
    Link Frequency Dependent Properties 01 - General
    Link Frequency Dependent Properties 02 - Details
    Link Loads - Deformation
    Link Loads - Gravity
    Link Loads - Target Force
    Link Local Axes Assignments 1 - Typical
    Link Local Axes Assignments 2 - Advanced
    Link Property Assignments
    Link Property Definitions 01 - General
    Link Property Definitions 02 - Linear
    Link Property Definitions 03 - MultiLinear
    Link Property Definitions 04 - Damper
    Link Property Definitions 05 - Gap
    Link Property Definitions 06 - Hook
    Link Property Definitions 07 - Rubber Isolator
    Link Property Definitions 08 - Sliding Isolator
    Link Property Definitions 09 - TC Sliding Isolator
    Link Property Definitions 10 - Plastic (Wen)
    Link Property Definitions 11 - Multilinear Plastic
    Link Property Definitions 12 - Triple Pendulum Isolator
    Link Property Definitions - Bridge Object Flags
    Link Vehicle Response Component Overwrites
    Load Case Definitions
    Load Pattern Definitions
    Masses 1 - Mass Source
    Mass Source
    Material List 1 - By Object Type
    Material List 2 - By Section Property
    Material Properties 01 - General
    Material Properties 01T - Material Temperatures
    Material Properties 02 - Basic Mechanical Properties
    Material Properties 03a - Steel Data
    Material Properties 03b - Concrete Data
    Material Properties 03c - Aluminum Data
    Material Properties 03d - Cold Formed Data
    Material Properties 03e - Rebar Data
    Material Properties 03f - Tendon Data
    Material Properties 03g - Other Data
    Material Properties 04 - User Stress-Strain Curves
    Material Properties 05a - Time Dependence - CEB-FIP 90
    Material Properties 06 - Damping Parameters
    Material Properties 07 - Thermal Properties
    Multi-Step Moving Load 1 - General
    Page 12 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Multi-Step Moving Load 2 - Vehicle Data


    Named Sets - Database Tables 1 - General
    Named Sets - Database Tables 2 - Selections
    Named Sets - Virtual Work
    Named Sets - Plot Function Traces 1 - General
    Named Sets - Plot Function Traces 2 - Vertical Functions
    Named Sets - Pushover
    Named Sets - Response Spectrum 1 - General
    Named Sets - Response Spectrum 2 - Joints
    Named Sets - Response Spectrum 3 - Damping
    Named Sets - Response Spectrum 4 - User Freq/Periods
    Options - Colors - Display
    Options - Colors - Output
    Overwrites - Aluminum Design - AA-ASD 2000
    Overwrites - Aluminum Design - AA-LRFD 2000
    Overwrites - Auto Wave Loads - Cable
    Overwrites - Auto Wave Loads - Frame
    Overwrites - Auto Wind Loads - Cable
    Overwrites - Auto Wind Loads - Frame
    Overwrites - Cold Formed Design - AISI-ASD96
    Overwrites - Cold Formed Design - AISI-LRFD96
    Overwrites - Concrete Design - AASHTO Concrete 07
    Overwrites - Concrete Design - ACI 318-02
    Overwrites - Concrete Design - ACI 318-05/IBC2003
    Overwrites - Concrete Design - ACI 318-08/IBC2009
    Overwrites - Concrete Design - ACI 318-11
    Overwrites - Concrete Design - ACI 318-99
    Overwrites - Concrete Design - AS 3600-09
    Overwrites - Concrete Design - AS 3600-01
    Overwrites - Concrete Design - BS8110 89
    Overwrites - Concrete Design - BS8110 97
    Overwrites - Concrete Design - Chinese 2010
    Overwrites - Concrete Design - CSA-A233-04
    Overwrites - Concrete Design - CSA-A233-94
    Overwrites - Concrete Design - EUROCODE 2-1992
    Overwrites - Concrete Design - Eurocode 2-2004
    Overwrites - Concrete Design - Hong Kong CP 2013
    Overwrites - Concrete Design - Hong Kong CP 2004
    Overwrites - Concrete Design - Indian IS 456-2000
    Overwrites - Concrete Design - Italian NTC 2008
    Overwrites - Concrete Design - Italian DM 14-2-92
    Overwrites - Concrete Design - KCI-1999
    Overwrites - Concrete Design - Mexican RCDF 2004
    Overwrites - Concrete Design - Mexican RCDF 2001
    Overwrites - Concrete Design - NZS 3101-06
    Overwrites - Concrete Design - NZS 3101-95
    Overwrites - Concrete Design - Singapore CP 65-99
    Overwrites - Concrete Design - TS 500-2000
    Overwrites - Concrete Design - UBC97
    Overwrites - Steel Design - AASHTO-LRFD-2007
    Overwrites - Steel Design - AISC 360-10
    Page 13 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Overwrites - Steel Design - AISC360-05-IBC2006


    Overwrites - Steel Design - AISC-ASD01
    Overwrites - Steel Design - AISC-ASD89
    Overwrites - Steel Design - AISC-LRFD93
    Overwrites - Steel Design - AISC-LRFD99
    Overwrites - Steel Design - API RP2A-LRFD 97
    Overwrites - Steel Design - API RP2A-WSD2000
    Overwrites - Steel Design - ASCE 10-97
    Overwrites - Steel Design - AS 4100-1998
    Overwrites - Steel Design - BS5950 2000
    Overwrites - Steel Design - BS5950 90
    Overwrites - Steel Design - CAN-CSA-S16-01
    Overwrites - Steel Design - CSA-S16-09
    Overwrites - Steel Design - Chinese 2010
    Overwrites - Steel Design - CISC 95
    Overwrites - Steel Design - EUROCODE 3-1993
    Overwrites - Steel Design - Eurocode 3-2005
    Overwrites - Steel Design - Indian IS 800:2007
    Overwrites - Steel Design - Indian IS:800-1998
    Overwrites - Steel Design - Italian NTC 2008
    Overwrites - Steel Design - Italian UNI 10011
    Overwrites - Steel Design - NZS 3404-1997
    Overwrites - Steel Design - Norsok N-004
    Overwrites - Steel Design - UBC97-ASD
    Overwrites - Steel Design - UBC97-LRFD
    Preferences - Aluminum Design - AA-ASD 2000
    Preferences - Aluminum Design - AA-LRFD 2000
    Preferences - Cold Formed Design - AISI-ASD96
    Preferences - Cold Formed Design - AISI-LRFD96
    Preferences - Concrete Design - AASHTO Concrete 07
    Preferences - Concrete Design - ACI 318-02
    Preferences - Concrete Design - ACI 318-05/IBC2003
    Preferences - Concrete Design - ACI 318-08/IBC2009
    Preferences - Concrete Design - ACI 318-11
    Preferences - Concrete Design - ACI 318-99
    Preferences - Concrete Design - AS 3600-09
    Preferences - Concrete Design - AS 3600-01
    Preferences - Concrete Design - BS8110 89
    Preferences - Concrete Design - BS8110 97
    Preferences - Concrete Design - Chinese 2010
    Preferences - Concrete Design - CSA-A233-04
    Preferences - Concrete Design - CSA-A233-94
    Preferences - Concrete Design - EUROCODE 2-1992
    Preferences - Concrete Design - Eurocode 2-2004
    Preferences - Concrete Design - Hong Kong CP 2013
    Preferences - Concrete Design - Hong Kong CP 2004
    Preferences - Concrete Design - Indian IS 456-2000
    Preferences - Concrete Design - Italian NTC 2008
    Preferences - Concrete Design - Italian DM 14-2-92
    Preferences - Concrete Design - KCI-1999
    Preferences - Concrete Design - Mexican RCDF 2004
    Page 14 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Preferences - Concrete Design - Mexican RCDF 2001


    Preferences - Concrete Design - NZS 3101-06
    Preferences - Concrete Design - NZS 3101-95
    Preferences - Concrete Design - Singapore CP 65-99
    Preferences - Concrete Design - TS 500-2000
    Preferences - Concrete Design - UBC97
    Preferences - Dimensional
    Preferences - Steel Design - AASHTO-LRFD-2007
    Preferences - Steel Design - AISC 360-10
    Preferences - Steel Design - AISC360-05-IBC2006
    Preferences - Steel Design - AISC-ASD01
    Preferences - Steel Design - AISC-ASD89
    Preferences - Steel Design - AISC-LRFD93
    Preferences - Steel Design - AISC-LRFD99
    Preferences - Steel Design - API RP2A-LRFD 97
    Preferences - Steel Design - API RP2A-WSD2000
    Preferences - Steel Design - ASCE 10-97
    Preferences - Steel Design - AS 4100-1998
    Preferences - Steel Design - BS5950 2000
    Preferences - Steel Design - BS5950 90
    Preferences - Steel Design - CAN-CSA-S16-01
    Preferences - Steel Design - CSA-S16-09
    Preferences - Steel Design - Chinese 2010
    Preferences - Steel Design - CISC 95
    Preferences - Steel Design - EUROCODE 3-1993
    Preferences - Steel Design - Eurocode 3-2005
    Preferences - Steel Design - Indian IS 800:2007
    Preferences - Steel Design - Indian IS:800-1998
    Preferences - Steel Design - Italian NTC 2008
    Preferences - Steel Design - Italian UNI 10011
    Preferences - Steel Design - NZS 3404-1997
    Preferences - Steel Design - Norsok N-004
    Preferences - Steel Design - UBC97-ASD
    Preferences - Steel Design - UBC97-LRFD
    Program Control
    Project Information
    Pushover Parameters - ATC40
    Pushover Parameters - Axis Data
    Pushover Parameters - FEMA356
    Pushover Parameters - FEMA440 Displacement Modification
    Pushover Parameters - FEMA440 Equivalent Linearization
    Pushover Parameters - FEMA440 Soil Structure Interaction
    Pushover Parameters - Force Displacement
    Rebar Sizes
    SD Stress-Strain 01 - Rebar Park
    SD Stress-Strain 02 - Rebar Simple
    SD Stress-Strain 03 - Structural Steel
    SD Stress-Strain 04 - Concrete Simple
    SD Stress-Strain 05 - Concrete Mander Unconfined
    SD Stress-Strain 06 - Concrete Mander Confined Circle
    SD Stress-Strain 07 - Concrete Mander Confined Rectangle
    Page 15 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Section Cuts 1 - General


    Section Cuts 2 - Advanced Local Axes
    Section Cuts 3 - Quadrilateral Definitions
    Section Designer Properties 01 - General
    Section Designer Properties 02 - Reinforcing At Shape Edges
    Section Designer Properties 03 - Reinforcing At Shape Corners
    Section Designer Properties 04 - Shape I/Wide Flange
    Section Designer Properties 05 - Shape Channel
    Section Designer Properties 06 - Shape Tee
    Section Designer Properties 07 - Shape Angle
    Section Designer Properties 08 - Shape Double Angle
    Section Designer Properties 09 - Shape Box/Tube
    Section Designer Properties 10 - Shape Pipe
    Section Designer Properties 11 - Shape Plate
    Section Designer Properties 12 - Shape Solid Rectangle
    Section Designer Properties 13 - Shape Solid Circle
    Section Designer Properties 14 - Shape Solid Segment
    Section Designer Properties 15 - Shape Solid Sector
    Section Designer Properties 16 - Shape Polygon
    Section Designer Properties 17 - Shape Reinforcing Single
    Section Designer Properties 18 - Shape Reinforcing Line
    Section Designer Properties 19 - Shape Reinforcing Rectangle
    Section Designer Properties 20 - Shape Reinforcing Circle
    Section Designer Properties 21 - Shape Reference Line
    Section Designer Properties 22 - Shape Reference Circle
    Section Designer Properties 23 - Shape Caltrans Square
    Section Designer Properties 24 - Shape Caltrans Circle
    Section Designer Properties 25 - Shape Caltrans Hexagon
    Section Designer Properties 26 - Shape Caltrans Octagon
    Section Designer Properties 27 - Caltrans Longitudinal Rebar
    Section Designer Properties 28 - Caltrans Longitudinal Tendons
    Section Designer Properties 29 - Caltrans Confinement Rebar
    Section Designer Properties 30 - Fiber General
    Section Designer Properties 31 - Stress Point
    Solid Auto Mesh Assignments
    Solid Bridge Object Flags
    Solid Edge Constraint Assignments
    Solid Loads - Gravity
    Solid Loads - Pore Pressure
    Solid Loads - Strain
    Solid Loads - Surface Pressure
    Solid Loads - Temperature
    Solid Local Axes Assignments 1 - Typical
    Solid Local Axes Assignments 2 - Advanced
    Solid Material Temperatures
    Solid Property Assignments
    Solid Property Definitions
    Solid Property Definitions - Bridge Object Flags
    Solid Spring Assignments
    Solid Vehicle Response Component Overwrites
    Steel Frame Design Lateral Displacement Targets
    Page 16 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Steel Frame Design Time Period Targets


    Tables Automatically Saved After Analysis
    Tendon Bridge Object Flags
    Tendon Layout Data 01 - General
    Tendon Layout Data 02 - Segments
    Tendon Loads - Deformation
    Tendon Loads - Gravity
    Tendon Loads - Strain
    Tendon Loads - Target Force
    Tendon Loads - Temperature
    Tendon Loads - Tension Force Or Stress
    Tendon Local Axes Assignments 1 - Typical
    Tendon Material Temperatures
    Tendon Section Assignments
    Tendon Section Definitions
    Tendon Section Definitions - Bridge Object Flags
    Tendon Tension And Compression Limits
    Tendon Vehicle Response Component Overwrites
    Vehicles 1 - Standard Vehicles
    Vehicles 2 - General Vehicles 1 - General
    Vehicles 3 - General Vehicles 2 - Loads
    Vehicles 4 - Vehicle Classes
    Vehicles 5 - Vehicle Length Effect Factors
    Assembled Joint Masses
    Base Reactions
    Bridge Object Forces
    Bridge Object Girder Forces
    Buckling Factors
    Element Deformations - Links
    Element Deformations - Panel Zones
    Element Virtual Work
    Element Forces - Area Shells
    Element Forces - Frames
    Element Forces - Links
    Element Forces - Panel Zones
    Element Joint Forces - Areas
    Element Joint Forces - Frames
    Element Joint Forces - Links
    Element Joint Forces - Solids
    Element Stresses - Frames
    Element Stresses - Area Asolids
    Element Stresses - Area Planes
    Element Stresses - Area Shells
    Element Stresses - Area Shell Layers
    Element Stresses - Solids
    Frame Fiber Hinge States 01 - Overall Hinge
    Frame Fiber Hinge States 02 - Individual Fibers
    Frame Hinge States
    Joint Accelerations - Absolute
    Joint Accelerations - Relative
    Joint Displacements
    Page 17 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Joint Displacements - Absolute


    Joint Displacements - Generalized
    Joint Reactions
    Joint Time History Response Spectra
    Joint Velocities - Absolute
    Joint Velocities - Relative
    Modal Load Participation Ratios
    Modal Participating Mass Ratios
    Modal Participation Factors
    Modal Periods And Frequencies
    Objects And Elements - Areas
    Objects And Elements - Frames
    Objects And Elements - Joints
    Objects And Elements - Links
    Objects And Elements - Solids
    Plot Function Traces
    Pushover Results - Force Displacement
    Pushover Results - ATC40
    Pushover Results - FEMA356
    Pushover Results - FEMA440 Displacement Modification
    Pushover Results - FEMA440 Equivalent Linearization
    Response Spectrum Modal Information
    Response Spectrum Modal Information - Displacement Loading
    Section Cut Forces - Analysis
    Section Cut Forces - Design
    Total Energy Components
    Aluminum Design 1 - Summary Data - AA-ASD 2000
    Aluminum Design 1 - Summary Data - AA-LRFD 2000
    Aluminum Design 2 - PMM Details - AA-ASD 2000
    Aluminum Design 2 - PMM Details - AA-LRFD 2000
    Aluminum Design 3 - Shear Details - AA-ASD 2000
    Aluminum Design 3 - Shear Details - AA-LRFD 2000
    Aluminum Design 4 - Buckling Constants - AA-ASD 2000
    Aluminum Design 4 - Buckling Constants - AA-LRFD 2000
    Aluminum Details 1 - Summary Data - AA-ASD 2000
    Aluminum Details 1 - Summary Data - AA-LRFD 2000
    Aluminum Details 2 - PMM Details - AA-ASD 2000
    Aluminum Details 2 - PMM Details - AA-LRFD 2000
    Aluminum Details 3 - Shear Details - AA-ASD 2000
    Aluminum Details 3 - Shear Details - AA-LRFD 2000
    Aluminum Details 4 - Buckling Constants - AA-ASD 2000
    Aluminum Details 4 - Buckling Constants - AA-LRFD 2000
    API Punch Check 1 - Summary Data - API RP2A-LRFD 97
    API Punch Check 1 - Summary Data - API RP2A-WSD2000
    NS Punch Check 1 - Summary Data - Norsok N-004
    API Punch Check 2 - Nominal Load Method - API RP2A-LRFD 97
    API Punch Check 2 - Punching Shear Method - API RP2A-WSD2000
    API Punch Check 2 - Nominal Load Method - API RP2A-WSD2000
    NS Punch Check 2 - Norsok N-004
    API Punch Details 1 - Summary Data - API RP2A-LRFD 97
    API Punch Details 1 - Summary Data - API RP2A-WSD2000
    Page 18 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    NS Punch Details 1 - Summary Data - Norsok N-004


    API Punch Details 2 - Nominal Load Method - API RP2A-LRFD 97
    API Punch Details 2 - Punching Shear Method - API RP2A-WSD2000
    API Punch Details 2 - Nominal Load Method - API RP2A-WSD2000
    NS Punch Details 2 - Norsok N-004
    Bridge Seismic Design 01 - Bent D-C
    Bridge Seismic Design 02 - Bent Column Force Demand
    Bridge Seismic Design 03 - Bent Column Idealized Moment Capacity
    Bridge Seismic Design 04 - Bent Column Cracked Properties
    Bridge Seismic Design 05 - Support Bearing Demand - Forces
    Bridge Seismic Design 06 - Support Bearing Demand - Deformations
    Bridge Seismic Design 07 - Support Length Demand - Unscaled
    Bridge Super Design - Design Result Status
    Bridge Super Design AASHTOSTD02 01 - CBoxStress
    Bridge Super Design AASHTOLRFD07 01 - CBoxStress
    Bridge Super Design AASHTOLRFD07 02 - CBoxShear-SectProp
    Bridge Super Design AASHTOLRFD07 03 - CBoxShear-SectResult
    Bridge Super Design AASHTOLRFD07 04 - CBoxShear-WebProp
    Bridge Super Design AASHTOLRFD07 05 - CBoxShear-WebResult
    Bridge Super Design AASHTOLRFD07 06 - CBoxFlexure
    Bridge Super Design AASHTOLRFD07 07 - CBoxPrinc
    Bridge Super Design AASHTOLRFD07 08 - PCCompStress
    Bridge Super Design AASHTOLRFD07 09 - PCCompShear-Prop
    Bridge Super Design AASHTOLRFD07 10 - PCCompShear-Result
    Bridge Super Design AASHTOLRFD07 11 - PCCompFlexure
    Bridge Super Design AASHTOLRFD07 12 - CBox2Stress
    Bridge Super Design AASHTOLRFD07 13 - CBox2Shear-Prop
    Bridge Super Design AASHTOLRFD07 14 - CBox2Shear-Result
    Bridge Super Design AASHTOLRFD07 15 - CBox2Flexure
    Bridge Super Design AASHTOLRFD07 16 - SteelICompStrgth-Prop
    Bridge Super Design AASHTOLRFD07 17 - SteelICompStrgth-FlxPs
    Bridge Super Design AASHTOLRFD07 18 - SteelICompStrgth-FlxNg
    Bridge Super Design AASHTOLRFD07 19 - SteelICompStrgth-Shear
    Bridge Super Design AASHTOLRFD07 20 - SteelICompServ-Prop
    Bridge Super Design AASHTOLRFD07 21 - SteelICompServ-FlxPs
    Bridge Super Design AASHTOLRFD07 22 - SteelICompServ-FlxNg
    Bridge Super Design AASHTOLRFD07 23 - SteelICompWebFatigue
    Bridge Super Design AASHTOLRFD07 24 - SteelICompCstrStg-Prop
    Bridge Super Design AASHTOLRFD07 25 - SteelICompCstrStg-FlxPs
    Bridge Super Design AASHTOLRFD07 26 - SteelICompCstrStg-FlxNg
    Bridge Super Design AASHTOLRFD07 27 - SteelICompCstrStg-Shear
    Bridge Super Design AASHTOLRFD07 28 - SteelICompCstrNStg-Prop
    Bridge Super Design AASHTOLRFD07 29 - SteelICompCstrNStg-FlxPs
    Bridge Super Design AASHTOLRFD07 30 - SteelICompCstrNStg-FlxNg
    Bridge Super Design AASHTOLRFD07 31 - SteelICompCstrNStg-Shear
    Bridge Super Design AASHTOLRFD12 01 - CBoxStress
    Bridge Super Design AASHTOLRFD12 02 - CBoxShear-SectProp
    Bridge Super Design AASHTOLRFD12 03 - CBoxShear-SectResult
    Bridge Super Design AASHTOLRFD12 04 - CBoxShear-WebProp
    Bridge Super Design AASHTOLRFD12 05 - CBoxShear-WebResult
    Bridge Super Design AASHTOLRFD12 06 - CBoxFlexure
    Page 19 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Bridge Super Design AASHTOLRFD12 07 - CBoxPrinc


    Bridge Super Design AASHTOLRFD12 08 - PCCompStress
    Bridge Super Design AASHTOLRFD12 09 - PCCompShear-Prop
    Bridge Super Design AASHTOLRFD12 10 - PCCompShear-Result
    Bridge Super Design AASHTOLRFD12 11 - PCCompFlexure
    Bridge Super Design AASHTOLRFD12 12 - CBox2Stress
    Bridge Super Design AASHTOLRFD12 13 - CBox2Shear-Prop
    Bridge Super Design AASHTOLRFD12 14 - CBox2Shear-Result
    Bridge Super Design AASHTOLRFD12 15 - CBox2Flexure
    Bridge Super Design AASHTOLRFD12 16 - SteelICompStrgth-Prop
    Bridge Super Design AASHTOLRFD12 17 - SteelICompStrgth-FlxPs
    Bridge Super Design AASHTOLRFD12 18 - SteelICompStrgth-FlxNg
    Bridge Super Design AASHTOLRFD12 19 - SteelICompStrgth-Shear
    Bridge Super Design AASHTOLRFD12 20 - SteelICompServ-Prop
    Bridge Super Design AASHTOLRFD12 21 - SteelICompServ-FlxPs
    Bridge Super Design AASHTOLRFD12 22 - SteelICompServ-FlxNg
    Bridge Super Design AASHTOLRFD12 23 - SteelICompWebFatigue
    Bridge Super Design AASHTOLRFD12 24 - SteelICompCstrStg-Prop
    Bridge Super Design AASHTOLRFD12 25 - SteelICompCstrStg-FlxPs
    Bridge Super Design AASHTOLRFD12 26 - SteelICompCstrStg-FlxNg
    Bridge Super Design AASHTOLRFD12 27 - SteelICompCstrStg-Shear
    Bridge Super Design AASHTOLRFD12 28 - SteelICompCstrNStg-Prop
    Bridge Super Design AASHTOLRFD12 29 - SteelICompCstrNStg-FlxPs
    Bridge Super Design AASHTOLRFD12 30 - SteelICompCstrNStg-FlxNg
    Bridge Super Design AASHTOLRFD12 31 - SteelICompCstrNStg-Shear
    Bridge Super Design AASHTOLRFD12 32 - SteelUCompStrgth-Prop
    Bridge Super Design AASHTOLRFD12 33 - SteelUCompStrgth-FlxPs
    Bridge Super Design AASHTOLRFD12 34 - SteelUCompStrgth-FlxNg
    Bridge Super Design AASHTOLRFD12 35 - SteelUCompStrgth-Shear
    Bridge Super Design AASHTOLRFD12 36 - SteelUCompServ-Prop
    Bridge Super Design AASHTOLRFD12 37 - SteelUCompServ-FlxPs
    Bridge Super Design AASHTOLRFD12 38 - SteelUCompServ-FlxNg
    Bridge Super Design AASHTOLRFD12 39 - SteelUCompWebFatigue
    Bridge Super Design AASHTOLRFD12 40 - SteelUCompCstrStg-Prop
    Bridge Super Design AASHTOLRFD12 41 - SteelUCompCstrStg-FlxPs
    Bridge Super Design AASHTOLRFD12 42 - SteelUCompCstrStg-FlxNg
    Bridge Super Design AASHTOLRFD12 43 - SteelUCompCstrStg-Shear
    Bridge Super Design AASHTOLRFD12 44 - SteelUCompCstrNStg-Prop
    Bridge Super Design AASHTOLRFD12 45 - SteelUCompCstrNStg-FlxPs
    Bridge Super Design AASHTOLRFD12 46 - SteelUCompCstrNStg-FlxNg
    Bridge Super Design AASHTOLRFD12 47 - SteelUCompCstrNStg-Shear
    Bridge Super Design JTG-D62-2004 01 - CBoxStress
    Bridge Super Design JTG-D62-2004 02 - CBoxCrkStress
    Bridge Super Design JTG-D62-2004 03 - CBoxFlexure
    Bridge Super Design JTG-D62-2004 04 - CBoxShear-SectProp
    Bridge Super Design JTG-D62-2004 05 - CBoxShear-SectResult
    Bridge Super Design JTG-D62-2004 06 - CBoxShear-WebProp
    Bridge Super Design JTG-D62-2004 07 - CBoxShear-WebResult
    Bridge Super Design JTG-D62-2004 08 - CBoxPrinc
    Bridge Super Design JTG-D62-2004 09 - CBoxCrkPrinc
    Bridge Super Design JTG-D62-2004 10 - CBoxTendonStress
    Page 20 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Bridge Super Design JTG-D62-2004 11 - CBoxCrackWidth


    Bridge Super Design CANCSAS606 01 - CBoxStress
    Bridge Super Design CANCSAS606 02 - CBoxShear-Prop
    Bridge Super Design CANCSAS606 03 - CBoxShear-Result
    Bridge Super Design CANCSAS606 04 - CBoxFlexure
    Bridge Super Design CANCSAS606 05 - CBox2Stress
    Bridge Super Design CANCSAS606 06 - CBox2Shear-Prop
    Bridge Super Design CANCSAS606 07 - CBox2Shear-Result
    Bridge Super Design CANCSAS606 08 - CBox2Flexure
    Bridge Super Design CANCSAS606 09 - PCCompStress
    Bridge Super Design CANCSAS606 10 - PCCompShear-Prop
    Bridge Super Design CANCSAS606 11 - PCCompShear-Result
    Bridge Super Design CANCSAS606 12 - PCCompFlexure
    Bridge Super Design CANCSAS606 13 - SteelICompStrgth-Prop
    Bridge Super Design CANCSAS606 14 - SteelICompStrgth-FlxPos
    Bridge Super Design CANCSAS606 15 - SteelICompStrgth-FlxNeg
    Bridge Super Design CANCSAS606 16 - SteelICompStrgth-Shear
    Bridge Super Design CANCSAS606 17 - SteelICompStrgth-FlxShrPos
    Bridge Super Design CANCSAS606 18 - SteelICompStrgth-FlxShrNeg
    Bridge Super Design CANCSAS606 19 - SteelICompServ-Prop
    Bridge Super Design CANCSAS606 20 - SteelICompServ-FlxPos
    Bridge Super Design CANCSAS606 21 - SteelICompServ-FlxNeg
    Bridge Super Design CANCSAS606 22 - SteelICompCstrStg-Prop
    Bridge Super Design CANCSAS606 23 - SteelICompCstrStg-FlxPos
    Bridge Super Design CANCSAS606 24 - SteelICompCstrStg-FlxNeg
    Bridge Super Design CANCSAS606 25 - SteelICompCstrStg-Shear
    Bridge Super Design CANCSAS606 26 - SteelICompCstrStg-FlxShrPos
    Bridge Super Design CANCSAS606 27 - SteelICompCstrStg-FlxShrNeg
    Bridge Super Design CANCSAS606 28 - SteelICompCstrNStg-Prop
    Bridge Super Design CANCSAS606 29 - SteelICompCstrNStg-FlxPos
    Bridge Super Design CANCSAS606 30 - SteelICompCstrNStg-FlxNeg
    Bridge Super Design CANCSAS606 31 - SteelICompCstrNStg-Shear
    Bridge Super Design CANCSAS606 32 - SteelICompCstrNStg-FlxShrPos
    Bridge Super Design CANCSAS606 33 - SteelICompCstrNStg-FlxShrNeg
    Bridge Super Design EUROCODE 01 - CBoxStress
    Bridge Super Design EUROCODE 02 - CBoxShear-Prop
    Bridge Super Design EUROCODE 03 - CBoxShear-Result
    Bridge Super Design EUROCODE 04 - CBoxFlexure
    Bridge Super Design EUROCODE 05 - CBox2Stress
    Bridge Super Design EUROCODE 06 - CBox2Shear-Prop
    Bridge Super Design EUROCODE 07 - CBox2Shear-Result
    Bridge Super Design EUROCODE 08 - CBox2Flexure
    Bridge Super Design EUROCODE 09 - PCCompStress
    Bridge Super Design EUROCODE 10 - PCCompShear-Prop
    Bridge Super Design EUROCODE 11 - PCCompShear-Result
    Bridge Super Design EUROCODE 12 - PCCompFlexure
    Bridge Super Design EUROCODE 13 - SteelICompUltimate-Prop
    Bridge Super Design EUROCODE 14 - SteelICompUltimate-FlxPos
    Bridge Super Design EUROCODE 15 - SteelICompUltimate-FlxNeg
    Bridge Super Design EUROCODE 16 - SteelICompUltimate-Shear
    Bridge Super Design EUROCODE 17 - SteelICompUltimate-FlxShrPos
    Page 21 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Bridge Super Design EUROCODE 18 - SteelICompUltimate-FlxShrNeg


    Bridge Super Design EUROCODE 19 - SteelICompServStress-Prop
    Bridge Super Design EUROCODE 20 - SteelICompServStress-FlxPos
    Bridge Super Design EUROCODE 21 - SteelICompServStress-FlxNeg
    Bridge Super Design EUROCODE 22 - SteelICompServRebar-Prop
    Bridge Super Design EUROCODE 23 - SteelICompServRebar-Min Rebar
    Bridge Super Design EUROCODE 24 - SteelICompServRebar-Cracking
    Bridge Super Design EUROCODE 25 - SteelICompCstrStg-Prop
    Bridge Super Design EUROCODE 26 - SteelICompCstrStg-FlxPos
    Bridge Super Design EUROCODE 27 - SteelICompCstrStg-FlxNeg
    Bridge Super Design EUROCODE 28 - SteelICompCstrStg-Shear
    Bridge Super Design EUROCODE 29 - SteelICompCstrStg-FlxShrPos
    Bridge Super Design EUROCODE 30 - SteelICompCstrStg-FlxShrNeg
    Bridge Super Design EUROCODE 31 - SteelICompCstrNStg-Prop
    Bridge Super Design EUROCODE 34 - SteelICompCstrNStg-Shear
    Bridge Super Design EUROCODE 35 - SteelICompCstrNStg-FlxShrPos
    Bridge Super Design EUROCODE 36 - SteelICompCstrNStg-FlxShrNeg
    Bridge Super Design IRC-112-2011 01 - CBoxStress
    Bridge Super Design IRC-112-2011 02 - CBoxShear-Prop
    Bridge Super Design IRC-112-2011 03 - CBoxShear-Result
    Bridge Super Design IRC-112-2011 04 - CBoxFlexure
    Bridge Super Design IRC-112-2011 05 - CBox2Stress
    Bridge Super Design IRC-112-2011 06 - CBox2Shear-Prop
    Bridge Super Design IRC-112-2011 07 - CBox2Shear-Result
    Bridge Super Design IRC-112-2011 08 - CBox2Flexure
    Bridge Super Design IRC-112-2011 09 - PCCompStress
    Bridge Super Design IRC-112-2011 10 - PCCompShear-Prop
    Bridge Super Design IRC-112-2011 11 - PCCompShear-Result
    Bridge Super Design IRC-112-2011 12 - PCCompFlexure
    Bridge Super Rating - Rating Result Status
    Bridge Super Rating AASHTOLRFD07 01 - CBoxFlexure-Prop
    Bridge Super Rating AASHTOLRFD07 02 - CBoxFlexure-Rating
    Bridge Super Rating AASHTOLRFD07 03 - CBoxMinRebar-Prop
    Bridge Super Rating AASHTOLRFD07 04 - CBoxMinRebar-Rating
    Bridge Super Rating AASHTOLRFD07 08 - CBox2Flexure-Prop
    Bridge Super Rating AASHTOLRFD07 09 - CBox2Flexure-Rating
    Bridge Super Rating AASHTOLRFD07 10 - CBox2MinRebar-Prop
    Bridge Super Rating AASHTOLRFD07 11 - CBox2MinRebar-Rating
    Bridge Super Rating AASHTOLRFD07 12 - CBox2Shear-Prop
    Bridge Super Rating AASHTOLRFD07 13 - CBox2Shear-Result
    Bridge Super Rating AASHTOLRFD07 14 - CBox2Shear-Rating
    Bridge Super Rating AASHTOLRFD07 15 - PCCompFlexure-Prop
    Bridge Super Rating AASHTOLRFD07 16 - PCCompFlexure-Rating
    Bridge Super Rating AASHTOLRFD07 17 - PCCompMinRebar-Prop
    Bridge Super Rating AASHTOLRFD07 18 - PCCompMinRebar-Rating
    Bridge Super Rating AASHTOLRFD07 19 - PCCompShear-Prop
    Bridge Super Rating AASHTOLRFD07 20 - PCCompShear-Result
    Bridge Super Rating AASHTOLRFD07 21 - PCCompShear-Rating
    Bridge Super Rating AASHTOLRFD07 22 - SteelINonCompStrgth-Prop
    Bridge Super Rating AASHTOLRFD07 23 - SteelINonCompStrgth-Flx
    Bridge Super Rating AASHTOLRFD07 24 - SteelINonCompStrgth-Shr
    Page 22 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Bridge Super Rating AASHTOLRFD07 25 - SteelINonCompServ-Prop


    Bridge Super Rating AASHTOLRFD07 26 - SteelINonCompServ-Flx
    Bridge Super Rating AASHTOLRFD07 27 - SteelICompStrgth-Prop
    Bridge Super Rating AASHTOLRFD07 28 - SteelICompStrgth-Flx
    Bridge Super Rating AASHTOLRFD07 29 - SteelICompStrgth-Shr
    Bridge Super Rating AASHTOLRFD07 30 - SteelICompServ-Prop
    Bridge Super Rating AASHTOLRFD07 31 - SteelICompServ-Flx
    Bridge Super Rating AASHTORATE11 01 - CBoxFlexure-Prop
    Bridge Super Rating AASHTORATE11 02 - CBoxFlexure-Rating
    Bridge Super Rating AASHTORATE11 03 - CBoxMinRebar-Prop
    Bridge Super Rating AASHTORATE11 04 - CBoxMinRebar-Rating
    Bridge Super Rating AASHTORATE11 08 - CBox2Flexure-Prop
    Bridge Super Rating AASHTORATE11 09 - CBox2Flexure-Rating
    Bridge Super Rating AASHTORATE11 10 - CBox2MinRebar-Prop
    Bridge Super Rating AASHTORATE11 11 - CBox2MinRebar-Rating
    Bridge Super Rating AASHTORATE11 12 - CBox2Shear-Prop
    Bridge Super Rating AASHTORATE11 13 - CBox2Shear-Result
    Bridge Super Rating AASHTORATE11 14 - CBox2Shear-Rating
    Bridge Super Rating AASHTORATE11 15 - PCCompFlexure-Prop
    Bridge Super Rating AASHTORATE11 16 - PCCompFlexure-Rating
    Bridge Super Rating AASHTORATE11 17 - PCCompMinRebar-Prop
    Bridge Super Rating AASHTORATE11 18 - PCCompMinRebar-Rating
    Bridge Super Rating AASHTORATE11 19 - PCCompShear-Prop
    Bridge Super Rating AASHTORATE11 20 - PCCompShear-Result
    Bridge Super Rating AASHTORATE11 21 - PCCompShear-Rating
    Bridge Super Rating AASHTORATE11 22 - SteelINonCompStrgth-Prop
    Bridge Super Rating AASHTORATE11 23 - SteelINonCompStrgth-Flx
    Bridge Super Rating AASHTORATE11 24 - SteelINonCompStrgth-Shr
    Bridge Super Rating AASHTORATE11 25 - SteelINonCompServ-Prop
    Bridge Super Rating AASHTORATE11 26 - SteelINonCompServ-Flx
    Bridge Super Rating AASHTORATE11 27 - SteelICompStrgth-Prop
    Bridge Super Rating AASHTORATE11 28 - SteelICompStrgth-Flx
    Bridge Super Rating AASHTORATE11 29 - SteelICompStrgth-Shr
    Bridge Super Rating AASHTORATE11 30 - SteelICompServ-Prop
    Bridge Super Rating AASHTORATE11 31 - SteelICompServ-Flx
    Cold Formed Design 1 - Summary Data - AISI-ASD96
    Cold Formed Design 1 - Summary Data - AISI-LRFD96
    Cold Formed Design 2 - PMM Details - AISI-ASD96
    Cold Formed Design 2 - PMM Details - AISI-LRFD96
    Cold Formed Design 3 - Shear Details - AISI-ASD96
    Cold Formed Design 3 - Shear Details - AISI-LRFD96
    Cold Formed Details 1 - Summary Data - AISI-ASD96
    Cold Formed Details 1 - Summary Data - AISI-LRFD96
    Cold Formed Details 2 - PMM Details - AISI-ASD96
    Cold Formed Details 2 - PMM Details - AISI-LRFD96
    Cold Formed Details 3 - Shear Details - AISI-ASD96
    Cold Formed Details 3 - Shear Details - AISI-LRFD96
    Concrete Design 1 - Column Summary Data - AASHTO Concrete 07
    Concrete Design 1 - Column Summary Data - ACI 318-02
    Concrete Design 1 - Column Summary Data - ACI 318-05/IBC2003
    Concrete Design 1 - Column Summary Data - ACI 318-08/IBC2009
    Page 23 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Concrete Design 1 - Column Summary Data - ACI 318-11


    Concrete Design 1 - Column Summary Data - ACI 318-99
    Concrete Design 1 - Column Summary Data - AS 3600-09
    Concrete Design 1 - Column Summary Data - AS 3600-01
    Concrete Design 1 - Column Summary Data - BS8110 89
    Concrete Design 1 - Column Summary Data - BS8110 97
    Concrete Design 1 - Column Summary Data - Chinese 2010
    Concrete Design 1 - Column Summary Data - CSA A233-04
    Concrete Design 1 - Column Summary Data - CSA-A233-94
    Concrete Design 1 - Column Summary Data - EUROCODE 2-1992
    Concrete Design 1 - Column Summary Data - Eurocode 2-2004
    Concrete Design 1 - Column Summary Data - Hong Kong CP 2013
    Concrete Design 1 - Column Summary Data - Hong Kong CP 2004
    Concrete Design 1 - Column Summary Data - Indian IS 456-2000
    Concrete Design 1 - Column Summary Data - Italian NTC 2008
    Concrete Design 1 - Column Summary Data - Italian DM 14-2-92
    Concrete Design 1 - Column Summary Data - KCI-1999
    Concrete Design 1 - Column Summary Data - Mexican RCDF 2004
    Concrete Design 1 - Column Summary Data - Mexican RCDF 2001
    Concrete Design 1 - Column Summary Data - NZS 3101-06
    Concrete Design 1 - Column Summary Data - NZS 3101-95
    Concrete Design 1 - Column Summary Data - Singapore CP 65:99
    Concrete Design 1 - Column Summary Data - TS 500-2000
    Concrete Design 1 - Column Summary Data - UBC97
    Concrete Design 2 - Beam Summary Data - AASHTO Concrete 07
    Concrete Design 2 - Beam Summary Data - ACI 318-02
    Concrete Design 2 - Beam Summary Data - ACI 318-05/IBC2003
    Concrete Design 2 - Beam Summary Data - ACI 318-08/IBC2009
    Concrete Design 2 - Beam Summary Data - ACI 318-11
    Concrete Design 2 - Beam Summary Data - ACI 318-99
    Concrete Design 2 - Beam Summary Data - AS 3600-09
    Concrete Design 2 - Beam Summary Data - AS 3600-01
    Concrete Design 2 - Beam Summary Data - BS8110 89
    Concrete Design 2 - Beam Summary Data - BS8110 97
    Concrete Design 2 - Beam Summary Data - Chinese 2010
    Concrete Design 2 - Beam Summary Data - CSA A233-04
    Concrete Design 2 - Beam Summary Data - CSA-A233-94
    Concrete Design 2 - Beam Summary Data - EUROCODE 2-1992
    Concrete Design 2 - Beam Summary Data - Eurocode 2-2004
    Concrete Design 2 - Beam Summary Data - Hong Kong CP 2013
    Concrete Design 2 - Beam Summary Data - Hong Kong CP 2004
    Concrete Design 2 - Beam Summary Data - Indian IS 456-2000
    Concrete Design 2 - Beam Summary Data - Italian NTC 2008
    Concrete Design 2 - Beam Summary Data - Italian DM 14-2-92
    Concrete Design 2 - Beam Summary Data - KCI-1999
    Concrete Design 2 - Beam Summary Data - Mexican RCDF 2004
    Concrete Design 2 - Beam Summary Data - Mexican RCDF 2001
    Concrete Design 2 - Beam Summary Data - NZS 3101-06
    Concrete Design 2 - Beam Summary Data - NZS 3101-95
    Concrete Design 2 - Beam Summary Data - Singapore CP 65:99
    Concrete Design 2 - Beam Summary Data - TS 500-2000
    Page 24 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Concrete Design 2 - Beam Summary Data - UBC97


    Concrete Design 3 - Joint Summary Data - ACI 318-02
    Concrete Design 3 - Joint Summary Data - ACI 318-05/IBC2003
    Concrete Design 3 - Joint Summary Data - ACI 318-08/IBC2009
    Concrete Design 3 - Joint Summary Data - ACI 318-11
    Concrete Design 3 - Joint Summary Data - ACI 318-99
    Concrete Design 3 - Joint Summary Data - AS 3600-09
    Concrete Design 3 - Joint Summary Data - AS 3600-01
    Concrete Design 3 - Joint Summary Data - BS8110 89
    Concrete Design 3 - Joint Summary Data - BS8110 97
    Concrete Design 3 - Joint Summary Data - CSA A233-04
    Concrete Design 3 - Joint Summary Data - CSA-A233-94
    Concrete Design 3 - Joint Summary Data - EUROCODE 2-1992
    Concrete Design 3 - Joint Summary Data - Eurocode 2-2004
    Concrete Design 3 - Joint Summary Data - Hong Kong CP 2013
    Concrete Design 3 - Joint Summary Data - Hong Kong CP 2004
    Concrete Design 3 - Joint Summary Data - Indian IS 456-2000
    Concrete Design 3 - Joint Summary Data - Italian NTC 2008
    Concrete Design 3 - Joint Summary Data - Italian DM 14-2-92
    Concrete Design 3 - Joint Summary Data - KCI-1999
    Concrete Design 3 - Joint Summary Data - Mexican RCDF 2004
    Concrete Design 3 - Joint Summary Data - Mexican RCDF 2001
    Concrete Design 3 - Joint Summary Data - NZS 3101-06
    Concrete Design 3 - Joint Summary Data - NZS 3101-95
    Concrete Design 3 - Joint Summary Data - Singapore CP 65:99
    Concrete Design 3 - Joint Summary Data - TS 500-2000
    Concrete Design 3 - Joint Summary Data - UBC97
    Concrete Details 1 - Column Summary Data - AASHTO Concrete 07
    Concrete Details 1 - Column Summary Data - ACI 318-02
    Concrete Details 1 - Column Summary Data - ACI 318-05/IBC2003
    Concrete Details 1 - Column Summary Data - ACI 318-08/IBC2009
    Concrete Details 1 - Column Summary Data - ACI 318-11
    Concrete Details 1 - Column Summary Data - ACI 318-99
    Concrete Details 1 - Column Summary Data - AS 3600-09
    Concrete Details 1 - Column Summary Data - AS 3600-01
    Concrete Details 1 - Column Summary Data - BS8110 89
    Concrete Details 1 - Column Summary Data - BS8110 97
    Concrete Details 1 - Column Summary Data - Chinese 2010
    Concrete Details 1 - Column Summary Data - CSA A233-04
    Concrete Details 1 - Column Summary Data - CSA-A233-94
    Concrete Details 1 - Column Summary Data - EUROCODE 2-1992
    Concrete Details 1 - Column Summary Data - Eurocode 2-2004
    Concrete Details 1 - Column Summary Data - Hong Kong CP 2013
    Concrete Details 1 - Column Summary Data - Hong Kong CP 2004
    Concrete Details 1 - Column Summary Data - Indian IS 456-2000
    Concrete Details 1 - Column Summary Data - Italian NTC 2008
    Concrete Details 1 - Column Summary Data - Italian DM 14-2-92
    Concrete Details 1 - Column Summary Data - KCI-1999
    Concrete Details 1 - Column Summary Data - Mexican RCDF 2004
    Concrete Details 1 - Column Summary Data - Mexican RCDF 2001
    Concrete Details 1 - Column Summary Data - NZS 3101-06
    Page 25 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Concrete Details 1 - Column Summary Data - NZS 3101-95


    Concrete Details 1 - Column Summary Data - Singapore CP 65:99
    Concrete Details 1 - Column Summary Data - TS 500-2000
    Concrete Details 1 - Column Summary Data - UBC97
    Concrete Details 2 - Beam Summary Data - AASHTO Concrete 07
    Concrete Details 2 - Beam Summary Data - ACI 318-02
    Concrete Details 2 - Beam Summary Data - ACI 318-05/IBC2003
    Concrete Details 2 - Beam Summary Data - ACI 318-08/IBC2009
    Concrete Details 2 - Beam Summary Data - ACI 318-11
    Concrete Details 2 - Beam Summary Data - ACI 318-99
    Concrete Details 2 - Beam Summary Data - AS 3600-09
    Concrete Details 2 - Beam Summary Data - AS 3600-01
    Concrete Details 2 - Beam Summary Data - BS8110 89
    Concrete Details 2 - Beam Summary Data - BS8110 97
    Concrete Details 2 - Beam Summary Data - Chinese 2010
    Concrete Details 2 - Beam Summary Data - CSA A233-04
    Concrete Details 2 - Beam Summary Data - CSA-A233-94
    Concrete Details 2 - Beam Summary Data - EUROCODE 2-1992
    Concrete Details 2 - Beam Summary Data - Eurocode 2-2004
    Concrete Details 2 - Beam Summary Data - Hong Kong CP 2013
    Concrete Details 2 - Beam Summary Data - Hong Kong CP 2004
    Concrete Details 2 - Beam Summary Data - Indian IS 456-2000
    Concrete Details 2 - Beam Summary Data - Italian NTC 2008
    Concrete Details 2 - Beam Summary Data - Italian DM 14-2-92
    Concrete Details 2 - Beam Summary Data - KCI-1999
    Concrete Details 2 - Beam Summary Data - Mexican RCDF 2004
    Concrete Details 2 - Beam Summary Data - Mexican RCDF 2001
    Concrete Details 2 - Beam Summary Data - NZS 3101-95
    Concrete Details 2 - Beam Summary Data - Singapore CP 65:99
    Concrete Details 2 - Beam Summary Data - TS 500-2000
    Concrete Details 2 - Beam Summary Data - UBC97
    Concrete Details 3 - Joint Summary Data - ACI 318-02
    Concrete Details 3 - Joint Summary Data - ACI 318-05/IBC2003
    Concrete Details 3 - Joint Summary Data - ACI 318-08/IBC2009
    Concrete Details 3 - Joint Summary Data - ACI 318-11
    Concrete Details 3 - Joint Summary Data - ACI 318-99
    Concrete Details 3 - Joint Summary Data - AS 3600-09
    Concrete Details 3 - Joint Summary Data - AS 3600-01
    Concrete Details 3 - Joint Summary Data - BS8110 89
    Concrete Details 3 - Joint Summary Data - BS8110 97
    Concrete Details 3 - Joint Summary Data - CSA A233-04
    Concrete Details 3 - Joint Summary Data - CSA-A233-94
    Concrete Details 3 - Joint Summary Data - EUROCODE 2-1992
    Concrete Details 3 - Joint Summary Data - Eurocode 2-2004
    Concrete Details 3 - Joint Summary Data - Hong Kong CP 2013
    Concrete Details 3 - Joint Summary Data - Hong Kong CP 2004
    Concrete Details 3 - Joint Summary Data - Indian IS 456-2000
    Concrete Details 3 - Joint Summary Data - Italian NTC 2008
    Concrete Details 3 - Joint Summary Data - Italian DM 14-2-92
    Concrete Details 3 - Joint Summary Data - KCI-1999
    Concrete Details 3 - Joint Summary Data - Mexican RCDF 2004
    Page 26 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Concrete Details 3 - Joint Summary Data - Mexican RCDF 2001


    Concrete Details 3 - Joint Summary Data - NZS 3101-06
    Concrete Details 3 - Joint Summary Data - NZS 3101-95
    Concrete Details 3 - Joint Summary Data - Singapore CP 65:99
    Concrete Details 3 - Joint Summary Data - TS 500-2000
    Concrete Details 3 - Joint Summary Data - UBC97
    Steel Design 1 - Summary Data - AASHTO-LRFD-2007
    Steel Design 1 - Summary Data - AISC 360-10
    Steel Design 1 - Summary Data - AISC360-05-IBC2006
    Steel Design 1 - Summary Data - AISC-ASD01
    Steel Design 1 - Summary Data - AISC-ASD89
    Steel Design 1 - Summary Data - AISC-LRFD93
    Steel Design 1 - Summary Data - AISC-LRFD99
    Steel Design 1 - Summary Data - API RP2A-LRFD 97
    Steel Design 1 - Summary Data - API RP2A-WSD2000
    Steel Design 1 - Summary Data - AS 4100-1998
    Steel Design 1 - Summary Data - ASCE 10-97
    Steel Design 1 - Summary Data - BS5950 2000
    Steel Design 1 - Summary Data - BS5950 90
    Steel Design 1 - Summary Data - Chinese 2010
    Steel Design 1 - Summary Data - CAN/CSA-S16-01
    Steel Design 1 - Summary Data - CSA-S16-09
    Steel Design 1 - Summary Data - CISC 95
    Steel Design 1 - Summary Data - EUROCODE 3-1993
    Steel Design 1 - Summary Data - Eurocode 3-2005
    Steel Design 1 - Summary Data - Indian IS 800:2007
    Steel Design 1 - Summary Data - Indian IS:800-1998
    Steel Design 1 - Summary Data - Italian NTC 2008
    Steel Design 1 - Summary Data - Italian UNI 10011
    Steel Design 1 - Summary Data - NZS 3404-1997
    Steel Design 1 - Summary Data - Norsok N-004
    Steel Design 1 - Summary Data - UBC97-ASD
    Steel Design 1 - Summary Data - UBC97-LRFD
    Steel Design 2 - PMM Details - AASHTO-LRFD-2007
    Steel Design 2 - PMM Details - AISC 360-10
    Steel Design 2 - PMM Details - AISC360-05-IBC2006
    Steel Design 2 - PMM Details - AISC-ASD01
    Steel Design 2 - PMM Details - AISC-ASD89
    Steel Design 2 - PMM Details - AISC-LRFD93
    Steel Design 2 - PMM Details - AISC-LRFD99
    Steel Design 2 - PMM Details - API RP2A-LRFD 97
    Steel Design 2 - PMM Details for Pipes - API RP2A-LRFD 97
    Steel Design 2 - PMM Details - API RP2A-WSD2000
    Steel Design 2 - PMM Details for Pipes - API RP2A-WSD2000
    Steel Design 2 - PMM Details - AS 4100-1998
    Steel Design 2 - PMM Details - ASCE 10-97
    Steel Design 2 - PMM Details for Angles - ASCE 10-97
    Steel Design 2 - PMM Details - BS5950 2000
    Steel Design 2 - PMM Details - BS5950 90
    Steel Design 2 - PMM Details - Chinese 2010
    Steel Design 2 - PMM Details - CSA-S16-09
    Page 27 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Steel Design 2 - PMM Details - CAN/CSA-S16-01


    Steel Design 2 - PMM Details - CISC 95
    Steel Design 2 - PMM Details - EUROCODE 3-1993
    Steel Design 2 - PMM Details - Eurocode 3-2005
    Steel Design 2 - PMM Details - Indian IS 800:2007
    Steel Design 2 - PMM Details - Indian IS:800-1998
    Steel Design 2 - PMM Details - Italian NTC 2008
    Steel Design 2 - PMM Details - Italian UNI 10011
    Steel Design 2 - PMM Details - NZS 3404-1997
    Steel Design 2 - PMM Details - Norsok N-004
    Steel Design 2 - PMM Details for Pipes - Norsok N-004
    Steel Design 2 - PMM Details - UBC97-ASD
    Steel Design 2 - PMM Details - UBC97-LRFD
    Steel Design 3 - Shear Details - AASHTO-LRFD-2007
    Steel Design 3 - Shear Details - AISC 360-10
    Steel Design 3 - Shear Details - AISC360-05-IBC2006
    Steel Design 3 - Shear Details - AISC-ASD01
    Steel Design 3 - Shear Details - AISC-ASD89
    Steel Design 3 - Shear Details - AISC-LRFD93
    Steel Design 3 - Shear Details - AISC-LRFD99
    Steel Design 3 - Shear Details - API RP2A-LRFD 97
    Steel Design 3 - Shear Details - API RP2A-WSD2000
    Steel Design 3 - Shear Details - AS 4100-1998
    Steel Design 3 - Shear Details - ASCE 10-97
    Steel Design 3 - Shear Details for Angles - ASCE 10-97
    Steel Design 3 - Shear Details - BS5950 2000
    Steel Design 3 - Shear Details - BS5950 90
    Steel Design 3 - Shear Details - Chinese 2010
    Steel Design 3 - Shear Details - CSA-S16-09
    Steel Design 3 - Shear Details - CAN/CSA-S16-01
    Steel Design 3 - Shear Details - CISC 95
    Steel Design 3 - Shear Details - EUROCODE 3-1993
    Steel Design 3 - Shear Details - Eurocode 3-2005
    Steel Design 3 - Shear Details - Indian IS 800:2007
    Steel Design 3 - Average Shear Details - Indian IS:800-1998
    Steel Design 3 - Shear Details - Italian NTC 2008
    Steel Design 3 - Shear Details - Italian UNI 10011
    Steel Design 3 - Shear Details - NZS 3404-1997
    Steel Design 3 - Shear Details - Norsok N-004
    Steel Design 3 - Shear Details - UBC97-ASD
    Steel Design 3 - Shear Details - UBC97-LRFD
    Steel Design 4 - Continuity Plates - AASHTO-LRFD-2007
    Steel Design 4 - Continuity Plates - AISC 360-10
    Steel Design 4 - Continuity Plates - AISC360-05-IBC2006
    Steel Design 4 - Continuity Plates - AISC-ASD01
    Steel Design 4 - Continuity Plates - AISC-ASD89
    Steel Design 4 - Continuity Plates - AISC-LRFD93
    Steel Design 4 - Continuity Plates - AISC-LRFD99
    Steel Design 4 - Continuity Plates - API RP2A-LRFD 97
    Steel Design 4 - Continuity Plates - API RP2A-WSD2000
    Steel Design 4 - Continuity Plates - AS 4100-1998
    Page 28 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Steel Design 4 - Continuity Plates - ASCE 10-97


    Steel Design 4 - Continuity Plates - BS5950 2000
    Steel Design 4 - Continuity Plates - BS5950 90
    Steel Design 4 - Continuity Plates - CSA-S16-09
    Steel Design 4 - Continuity Plates - CAN/CSA-S16-01
    Steel Design 4 - Continuity Plates - CISC 95
    Steel Design 4 - Continuity Plates - EUROCODE 3-1993
    Steel Design 4 - Continuity Plates - Eurocode 3-2005
    Steel Design 4 - Continuity Plates - Indian IS 800:2007
    Steel Design 4 - Maximum Shear Details - Indian IS:800-1998
    Steel Design 4 - Continuity Plates - Italian NTC 2008
    Steel Design 4 - Continuity Plates - Italian UNI 10011
    Steel Design 4 - Continuity Plates - NZS 3404-1997
    Steel Design 4 - Continuity Plates - Norsok N-004
    Steel Design 4 - Continuity Plates - UBC97-ASD
    Steel Design 4 - Continuity Plates - UBC97-LRFD
    Steel Design 5 - Doubler Plates - AASHTO-LRFD-2007
    Steel Design 5 - Doubler Plates - AISC 360-10
    Steel Design 5 - Doubler Plates - AISC360-05-IBC2006
    Steel Design 5 - Doubler Plates - AISC-ASD01
    Steel Design 5 - Doubler Plates - AISC-ASD89
    Steel Design 5 - Doubler Plates - AISC-LRFD93
    Steel Design 5 - Doubler Plates - AISC-LRFD99
    Steel Design 5 - Doubler Plates - API RP2A-LRFD 97
    Steel Design 5 - Doubler Plates - API RP2A-WSD2000
    Steel Design 5 - Doubler Plates - AS 4100-1998
    Steel Design 5 - Doubler Plates - ASCE 10-97
    Steel Design 5 - Doubler Plates - BS5950 2000
    Steel Design 5 - Doubler Plates - BS5950 90
    Steel Design 5 - Doubler Plates - CSA-S16-09
    Steel Design 5 - Doubler Plates - CAN/CSA-S16-01
    Steel Design 5 - Doubler Plates - CISC 95
    Steel Design 5 - Doubler Plates - EUROCODE 3-1993
    Steel Design 5 - Doubler Plates - Eurocode 3-2005
    Steel Design 5 - Doubler Plates - Indian IS 800:2007
    Steel Design 5 - Equivalent Stress Details - Indian IS:800-1998
    Steel Design 5 - Doubler Plates - Italian NTC 2008
    Steel Design 5 - Doubler Plates - Italian UNI 10011
    Steel Design 5 - Doubler Plates - NZS 3404-1997
    Steel Design 5 - Doubler Plates - Norsok N-004
    Steel Design 5 - Doubler Plates - UBC97-ASD
    Steel Design 5 - Doubler Plates - UBC97-LRFD
    Steel Design 6 - Beam/Column Ratios - AASHTO-LRFD-2007
    Steel Design 6 - Beam/Column Ratios - AISC 360-10
    Steel Design 6 - Beam/Column Ratios - AISC360-05-IBC2006
    Steel Design 6 - Beam/Column Ratios - AISC-ASD01
    Steel Design 6 - Beam/Column Ratios - AISC-ASD89
    Steel Design 6 - Beam/Column Ratios - AISC-LRFD93
    Steel Design 6 - Beam/Column Ratios - AISC-LRFD99
    Steel Design 6 - Beam/Column Ratios - API RP2A-LRFD 97
    Steel Design 6 - Beam/Column Ratios - API RP2A-WSD2000
    Page 29 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Steel Design 6 - Beam/Column Ratios - AS 4100-1998


    Steel Design 6 - Beam/Column Ratios - ASCE 10-97
    Steel Design 6 - Beam/Column Ratios - BS5950 2000
    Steel Design 6 - Beam/Column Ratios - BS5950 90
    Steel Design 6 - Beam/Column Ratios - CSA-S16-09
    Steel Design 6 - Beam/Column Ratios - CAN/CSA-S16-01
    Steel Design 6 - Beam/Column Ratios - CISC 95
    Steel Design 6 - Beam/Column Ratios - EUROCODE 3-1993
    Steel Design 6 - Beam/Column Ratios - Eurocode 3-2005
    Steel Design 6 - Beam/Column Ratios - Indian IS 800:2007
    Steel Design 6 - Beam/Column Ratios - Italian NTC 2008
    Steel Design 6 - Beam/Column Ratios - Italian UNI 10011
    Steel Design 6 - Beam/Column Ratios - NZS 3404-1997
    Steel Design 6 - Beam/Column Ratios - Norsok N-004
    Steel Design 6 - Beam/Column Ratios - UBC97-ASD
    Steel Design 6 - Beam/Column Ratios - UBC97-LRFD
    Steel Design 7 - Beam Shear Forces - AASHTO-LRFD-2007
    Steel Design 7 - Beam Shear Forces - AISC 360-10
    Steel Design 7 - Beam Shear Forces - AISC360-05-IBC2006
    Steel Design 7 - Beam Shear Forces - AISC-ASD01
    Steel Design 7 - Beam Shear Forces - AISC-ASD89
    Steel Design 7 - Beam Shear Forces - AISC-LRFD93
    Steel Design 7 - Beam Shear Forces - AISC-LRFD99
    Steel Design 7 - Beam Shear Forces - API RP2A-LRFD 97
    Steel Design 7 - Beam Shear Forces - API RP2A-WSD2000
    Steel Design 7 - Beam Shear Forces - AS 4100-1998
    Steel Design 7 - Beam Shear Forces - ASCE 10-97
    Steel Design 7 - Beam Shear Forces - BS5950 2000
    Steel Design 7 - Beam Shear Forces - BS5950 90
    Steel Design 7 - Beam Shear Forces - CSA-S16-09
    Steel Design 7 - Beam Shear Forces - CAN/CSA-S16-01
    Steel Design 7 - Beam Shear Forces - CISC 95
    Steel Design 7 - Beam Shear Forces - EUROCODE 3-1993
    Steel Design 7 - Beam Shear Forces - Eurocode 3-2005
    Steel Design 7 - Beam Shear Forces - Indian IS 800:2007
    Steel Design 7 - Beam Shear Forces - Italian NTC 2008
    Steel Design 7 - Beam Shear Forces - Italian UNI 10011
    Steel Design 7 - Beam Shear Forces - NZS 3404-1997
    Steel Design 7 - Beam Shear Forces - Norsok N-004
    Steel Design 7 - Beam Shear Forces - UBC97-ASD
    Steel Design 7 - Beam Shear Forces - UBC97-LRFD
    Steel Design 8 - Brace Max Axial Load - AASHTO-LRFD-2007
    Steel Design 8 - Brace Max Axial Load - AISC 360-10
    Steel Design 8 - Brace Max Axial Load - AISC360-05-IBC2006
    Steel Design 8 - Brace Max Axial Load - AISC-ASD01
    Steel Design 8 - Brace Max Axial Load - AISC-ASD89
    Steel Design 8 - Brace Max Axial Load - AISC-LRFD93
    Steel Design 8 - Brace Max Axial Load - AISC-LRFD99
    Steel Design 8 - Brace Max Axial Load - API RP2A-LRFD 97
    Steel Design 8 - Brace Max Axial Load - API RP2A-WSD2000
    Steel Design 8 - Brace Max Axial Load - AS 4100-1998
    Page 30 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Steel Design 8 - Brace Max Axial Load - ASCE 10-97


    Steel Design 8 - Brace Max Axial Load - BS5950 2000
    Steel Design 8 - Brace Max Axial Load - BS5950 90
    Steel Design 8 - Brace Max Axial Load - CSA-S16-09
    Steel Design 8 - Brace Max Axial Load - CAN/CSA-S16-01
    Steel Design 8 - Brace Max Axial Load - CISC 95
    Steel Design 8 - Brace Max Axial Load - EUROCODE 3-1993
    Steel Design 8 - Brace Max Axial Load - Eurocode 3-2005
    Steel Design 8 - Brace Max Axial Load - Indian IS 800:2007
    Steel Design 8 - Brace Max Axial Load - Italian NTC 2008
    Steel Design 8 - Brace Max Axial Load - Italian UNI 10011
    Steel Design 8 - Brace Max Axial Load - NZS 3404-1997
    Steel Design 8 - Brace Max Axial Load - Norsok N-004
    Steel Design 8 - Brace Max Axial Load - UBC97-ASD
    Steel Design 8 - Brace Max Axial Load - UBC97-LRFD
    Steel Design 9 - Decision Parameters - AISC 360-10
    Steel Design 9 - Decision Parameters - AISC360-05-IBC2006
    Steel Details 1 - Summary Data - AASHTO-LRFD-2007
    Steel Details 1 - Summary Data - AISC 360-10
    Steel Details 1 - Summary Data - AISC360-05-IBC2006
    Steel Details 1 - Summary Data - AISC-ASD01
    Steel Details 1 - Summary Data - AISC-ASD89
    Steel Details 1 - Summary Data - AISC-LRFD93
    Steel Details 1 - Summary Data - AISC-LRFD99
    Steel Details 1 - Summary Data - API RP2A-LRFD 97
    Steel Details 1 - Summary Data - API RP2A-WSD2000
    Steel Details 1 - Summary Data - AS 4100-1998
    Steel Details 1 - Summary Data - ASCE 10-97
    Steel Details 1 - Summary Data - BS5950 2000
    Steel Details 1 - Summary Data - BS5950 90
    Steel Details 1 - Summary Data - Chinese 2010
    Steel Details 1 - Summary Data - CSA-S16-09
    Steel Details 1 - Summary Data - CAN/CSA-S16-01
    Steel Details 1 - Summary Data - CISC 95
    Steel Details 1 - Summary Data - EUROCODE 3-1993
    Steel Details 1 - Summary Data - Eurocode 3-2005
    Steel Details 1 - Summary Data - Indian IS 800:2007
    Steel Details 1 - Summary Data - Indian IS:800-1998
    Steel Details 1 - Summary Data - Italian NTC 2008
    Steel Details 1 - Summary Data - Italian UNI 10011
    Steel Details 1 - Summary Data - NZS 3404-1997
    Steel Details 1 - Summary Data - Norsok N-004
    Steel Details 1 - Summary Data - UBC97-ASD
    Steel Details 1 - Summary Data - UBC97-LRFD
    Steel Details 2 - PMM Details - AASHTO-LRFD-2007
    Steel Details 2 - PMM Details - AISC 360-10
    Steel Details 2 - PMM Details - AISC360-05-IBC2006
    Steel Details 2 - PMM Details - AISC-ASD01
    Steel Details 2 - PMM Details - AISC-ASD89
    Steel Details 2 - PMM Details - AISC-LRFD93
    Steel Details 2 - PMM Details - AISC-LRFD99
    Page 31 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Steel Details 2 - PMM Details - API RP2A-LRFD 97


    Steel Details 2 - PMM Details for Pipes - API RP2A-LRFD 97
    Steel Details 2 - PMM Details - API RP2A-WSD2000
    Steel Details 2 - PMM Details for Pipes - API RP2A-WSD2000
    Steel Details 2 - PMM Details - AS 4100-1998
    Steel Details 2 - PMM Details - ASCE 10-97
    Steel Details 2 - PMM Details for Angles - ASCE 10-97
    Steel Details 2 - PMM Details - BS5950 2000
    Steel Details 2 - PMM Details - BS5950 90
    Steel Details 2 - PMM Details - Chinese 2010
    Steel Details 2 - PMM Details - CSA-S16-09
    Steel Details 2 - PMM Details - CAN/CSA-S16-01
    Steel Details 2 - PMM Details - CISC 95
    Steel Details 2 - PMM Details - EUROCODE 3-1993
    Steel Details 2 - PMM Details - Eurocode 3-2005
    Steel Details 2 - PMM Details - Indian IS 800:2007
    Steel Details 2 - PMM Details - Indian IS:800-1998
    Steel Details 2 - PMM Details - Italian NTC 2008
    Steel Details 2 - PMM Details - Italian UNI 10011
    Steel Details 2 - PMM Details - NZS 3404-1997
    Steel Details 2 - PMM Details - Norsok N-004
    Steel Details 2 - PMM Details for Pipes - Norsok N-004
    Steel Details 2 - PMM Details - UBC97-ASD
    Steel Details 2 - PMM Details - UBC97-LRFD
    Steel Details 3 - Shear Details - AASHTO-LRFD-2007
    Steel Details 3 - Shear Details - AISC 360-10
    Steel Details 3 - Shear Details - AISC360-05-IBC2006
    Steel Details 3 - Shear Details - AISC-ASD01
    Steel Details 3 - Shear Details - AISC-ASD89
    Steel Details 3 - Shear Details - AISC-LRFD93
    Steel Details 3 - Shear Details - AISC-LRFD99
    Steel Details 3 - Shear Details - API RP2A-LRFD 97
    Steel Details 3 - Shear Details - API RP2A-WSD2000
    Steel Details 3 - Shear Details - AS 4100-1998
    Steel Details 3 - Shear Details - ASCE 10-97
    Steel Details 3 - Shear Details for Angles - ASCE 10-97
    Steel Details 3 - Shear Details - BS5950 2000
    Steel Details 3 - Shear Details - BS5950 90
    Steel Details 3 - Shear Details - Chinese 2010
    Steel Details 3 - Shear Details - CSA-S16-09
    Steel Details 3 - Shear Details - CAN/CSA-S16-01
    Steel Details 3 - Shear Details - CISC 95
    Steel Details 3 - Shear Details - EUROCODE 3-1993
    Steel Details 3 - Shear Details - Eurocode 3-2005
    Steel Details 3 - Shear Details - Indian IS 800:2007
    Steel Details 3 - Average Shear Details - Indian IS:800-1998
    Steel Details 3 - Shear Details - Italian NTC 2008
    Steel Details 3 - Shear Details - Italian UNI 10011
    Steel Details 3 - Shear Details - NZS 3404-1997
    Steel Details 3 - Shear Details - Norsok N-004
    Steel Details 3 - Shear Details - UBC97-ASD
    Page 32 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Steel Details 3 - Shear Details - UBC97-LRFD


    Steel Details 4 - Continuity Plates - AASHTO-LRFD-2007
    Steel Details 4 - Continuity Plates - AISC 360-10
    Steel Details 4 - Continuity Plates - AISC360-05-IBC2006
    Steel Details 4 - Continuity Plates - AISC-ASD01
    Steel Details 4 - Continuity Plates - AISC-ASD89
    Steel Details 4 - Continuity Plates - AISC-LRFD93
    Steel Details 4 - Continuity Plates - AISC-LRFD99
    Steel Details 4 - Continuity Plates - API RP2A-LRFD 97
    Steel Details 4 - Continuity Plates - API RP2A-WSD2000
    Steel Details 4 - Continuity Plates - AS 4100-1998
    Steel Details 4 - Continuity Plates - ASCE 10-97
    Steel Details 4 - Continuity Plates - BS5950 2000
    Steel Details 4 - Continuity Plates - BS5950 90
    Steel Details 4 - Continuity Plates - CSA-S16-09
    Steel Details 4 - Continuity Plates - CAN/CSA-S16-01
    Steel Details 4 - Continuity Plates - CISC 95
    Steel Details 4 - Continuity Plates - EUROCODE 3-1993
    Steel Details 4 - Continuity Plates - Eurocode 3-2005
    Steel Details 4 - Continuity Plates - Indian IS 800:2007
    Steel Details 4 - Maximum Shear Details - Indian IS:800-1998
    Steel Details 4 - Continuity Plates - Italian NTC 2008
    Steel Details 4 - Continuity Plates - Italian UNI 10011
    Steel Details 4 - Continuity Plates - NZS 3404-1997
    Steel Details 4 - Continuity Plates - Norsok N-004
    Steel Details 4 - Continuity Plates - UBC97-ASD
    Steel Details 4 - Continuity Plates - UBC97-LRFD
    Steel Details 5 - Doubler Plates - AASHTO-LRFD-2007
    Steel Details 5 - Doubler Plates - AISC 360-10
    Steel Details 5 - Doubler Plates - AISC360-05-IBC2006
    Steel Details 5 - Doubler Plates - AISC-ASD01
    Steel Details 5 - Doubler Plates - AISC-ASD89
    Steel Details 5 - Doubler Plates - AISC-LRFD93
    Steel Details 5 - Doubler Plates - AISC-LRFD99
    Steel Details 5 - Doubler Plates - API RP2A-LRFD 97
    Steel Details 5 - Doubler Plates - API RP2A-WSD2000
    Steel Details 5 - Doubler Plates - ASCE 10-97
    Steel Details 5 - Doubler Plates - BS5950 2000
    Steel Details 5 - Doubler Plates - BS5950 90
    Steel Details 5 - Doubler Plates - CCSA-S16-09
    Steel Details 5 - Doubler Plates - CAN/CSA-S16-01
    Steel Details 5 - Doubler Plates - CISC 95
    Steel Details 5 - Doubler Plates - EUROCODE 3-1993
    Steel Details 5 - Doubler Plates - Eurocode 3-2005
    Steel Details 5 - Doubler Plates - Indian IS 800:2007
    Steel Details 5 - Equivalent Stress Details - Indian IS:800-1998
    Steel Details 5 - Doubler Plates - Italian NTC 2008
    Steel Details 5 - Doubler Plates - Italian UNI 10011
    Steel Details 5 - Doubler Plates - NZS 3404-1997
    Steel Details 5 - Doubler Plates - Norsok N-004
    Steel Details 5 - Doubler Plates - UBC97-ASD
    Page 33 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Steel Details 5 - Doubler Plates - UBC97-LRFD


    Steel Details 6 - Beam/Column Ratios - AASHTO-LRFD-2007
    Steel Details 6 - Beam/Column Ratios - AISC 360-10
    Steel Details 6 - Beam/Column Ratios - AISC360-05-IBC2006
    Steel Details 6 - Beam/Column Ratios - AISC-ASD01
    Steel Details 6 - Beam/Column Ratios - AISC-ASD89
    Steel Details 6 - Beam/Column Ratios - AISC-LRFD93
    Steel Details 6 - Beam/Column Ratios - AISC-LRFD99
    Steel Details 6 - Beam/Column Ratios - API RP2A-LRFD 97
    Steel Details 6 - Beam/Column Ratios - API RP2A-WSD2000
    Steel Details 6 - Beam/Column Ratios - AS 4100-1998
    Steel Details 6 - Beam/Column Ratios - ASCE 10-97
    Steel Details 6 - Beam/Column Ratios - BS5950 2000
    Steel Details 6 - Beam/Column Ratios - BS5950 90
    Steel Details 6 - Beam/Column Ratios - CSA-S16-09
    Steel Details 6 - Beam/Column Ratios - CAN/CSA-S16-01
    Steel Details 6 - Beam/Column Ratios - CISC 95
    Steel Details 6 - Beam/Column Ratios - EUROCODE 3-1993
    Steel Details 6 - Beam/Column Ratios - Eurocode 3-2005
    Steel Details 6 - Beam/Column Ratios - Indian IS 800:2007
    Steel Details 6 - Beam/Column Ratios - Italian NTC 2008
    Steel Details 6 - Beam/Column Ratios - Italian UNI 10011
    Steel Details 6 - Beam/Column Ratios - NZS 3404-1997
    Steel Details 6 - Beam/Column Ratios - Norsok N-004
    Steel Details 6 - Beam/Column Ratios - UBC97-ASD
    Steel Details 6 - Beam/Column Ratios - UBC97-LRFD
    Steel Details 7 - Beam Shear Forces - AASHTO-LRFD-2007
    Steel Details 7 - Beam Shear Forces - AISC 360-10
    Steel Details 7 - Beam Shear Forces - AISC360-05-IBC2006
    Steel Details 7 - Beam Shear Forces - AISC-ASD01
    Steel Details 7 - Beam Shear Forces - AISC-ASD89
    Steel Details 7 - Beam Shear Forces - AISC-LRFD93
    Steel Details 7 - Beam Shear Forces - AISC-LRFD99
    Steel Details 7 - Beam Shear Forces - API RP2A-LRFD 97
    Steel Details 7 - Beam Shear Forces - API RP2A-WSD2000
    Steel Details 7 - Beam Shear Forces - AS 4100-1998
    Steel Details 7 - Beam Shear Forces - ASCE 10-97
    Steel Details 7 - Beam Shear Forces - BS5950 2000
    Steel Details 7 - Beam Shear Forces - BS5950 90
    Steel Details 7 - Beam Shear Forces - CSA-S16-09
    Steel Details 7 - Beam Shear Forces - CAN/CSA-S16-01
    Steel Details 7 - Beam Shear Forces - CISC 95
    Steel Details 7 - Beam Shear Forces - EUROCODE 3-1993
    Steel Details 7 - Beam Shear Forces - Eurocode 3-2005
    Steel Details 7 - Beam Shear Forces - Indian IS 800:2007
    Steel Details 7 - Beam Shear Forces - Italian NTC 2008
    Steel Details 7 - Beam Shear Forces - Italian UNI 10011
    Steel Details 7 - Beam Shear Forces - NZS 3404-1997
    Steel Details 7 - Beam Shear Forces - Norsok N-004
    Steel Details 7 - Beam Shear Forces - UBC97-ASD
    Steel Details 7 - Beam Shear Forces - UBC97-LRFD
    Page 34 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Steel Details 8 - Brace Max Axial Load - AASHTO-LRFD-2007


    Steel Details 8 - Brace Max Axial Load - AISC 360-10
    Steel Details 8 - Brace Max Axial Load - AISC360-05-IBC2006
    Steel Details 8 - Brace Max Axial Load - AISC-ASD01
    Steel Details 8 - Brace Max Axial Load - AISC-ASD89
    Steel Details 8 - Brace Max Axial Load - AISC-LRFD93
    Steel Details 8 - Brace Max Axial Load - AISC-LRFD99
    Steel Details 8 - Brace Max Axial Load - API RP2A-LRFD 97
    Steel Details 8 - Brace Max Axial Load - API RP2A-WSD2000
    Steel Details 8 - Brace Max Axial Load - AS 4100-1998
    Steel Details 8 - Brace Max Axial Load - ASCE 10-97
    Steel Details 8 - Brace Max Axial Load - BS5950 2000
    Steel Details 8 - Brace Max Axial Load - BS5950 90
    Steel Details 8 - Brace Max Axial Load - CSA-S16-09
    Steel Details 8 - Brace Max Axial Load - CAN/CSA-S16-01
    Steel Details 8 - Brace Max Axial Load - CISC 95
    Steel Details 8 - Brace Max Axial Load - EUROCODE 3-1993
    Steel Details 8 - Brace Max Axial Load - Eurocode 3-2005
    Steel Details 8 - Brace Max Axial Load - Indian IS 800:2007
    Steel Details 8 - Brace Max Axial Load - Italian NTC 2008
    Steel Details 8 - Brace Max Axial Load - Italian UNI 10011
    Steel Details 8 - Brace Max Axial Load - NZS 3404-1997
    Steel Details 8 - Brace Max Axial Load - Norsok N-004
    Steel Details 8 - Brace Max Axial Load - UBC97-ASD
    Steel Details 8 - Brace Max Axial Load - UBC97-LRFD
    Steel Details 9 - Decision Parameters - AISC 360-10
    Steel Details 9 - Decision Parameters - AISC360-05-IBC2006
    User Defined Table Definition 1
    User Defined Table Definition 2
    Note:
    The Format item specified for each field indicates the section and specific item in the Program Default
    Database Number Formatting Options form that controls the formatting (units, decimal places, etc.) for the
    specified field. This form can be accessed using the Options menu > Database > Set Program Default DB
    Formatting command.

    Page 35 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Active Degrees of Freedom

    Field: UX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No, indicating if the UX degree of freedom is active.

    Field: UY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No, indicating if the UY degree of freedom is active.

    Field: UZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No, indicating if the UZ degree of freedom is active.

    Field: RX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No, indicating if the RX degree of freedom is active.

    Field: RY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No, indicating if the RY degree of freedom is active.

    Field: RZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No, indicating if the RZ degree of freedom is active.
    Table: Analysis Options

    Page 36 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Solver
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Standard, Advanced or Multithreaded indicating the solver to be used.

    Field: SolverProc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Auto, GUI Process, or Analysis Process indicating the process the solver
    executes in.

    Field: Force32Bit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if analysis is to always be run as 32-bit, even on 64-bit machines.
    Otherwise it is No.

    Field: StiffCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load case for which stiffness and mass matrices are to be output.

    Field: GeomMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the model geometry has been modified based on displacements
    obtained from a specified load case. Otherwise it is No.
    Typically, this item should never be changed in the imported database tables. The default
    value is No.
    Table: Area Added Mass Assignments

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Page 37 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MassPerArea
    Field is Imported: Yes
    Format: Mass/Area (Mass and Weight section of form)
    Units: Force-Sec2/Length3
    Added mass per unit area applied to the area object.
    Table: Area Auto Mesh Assignments

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: MeshType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Number of Elements, Maximum Size, Points On Edges, Cookie Cut Lines,
    Cookie Cut Points or General indicating the type of automatic meshing specified.
    .

    Field: MeshGroup
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This group used to specify points and lines used in determining how the area object is to
    be meshed. This item applies when the MeshType is Points On Edges, Cookie Cut Lines,
    Cookie Cut Points and General.

    Field: Number1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item only applies when the MeshType item is Number of Elements.
    If the MeshType item is Number of Elements then the area object is to be (internally)
    automatically meshed into Number1 by Number2 elements by the program for analysis.
    Number1 is the number of elements along the edge of the area object from Point 1 to Point
    2 of the area object.
    Number2 is the number of elements along an adjacent edge of the area object.

    Page 38 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Number2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item only applies when the MeshType item is Number of Elements.
    If the MeshType item is Number of Elements then the area object is to be (internally)
    automatically meshed into Number1 by Number2 elements by the program for analysis.
    Number1 is the number of elements along the edge of the area object from Point 1 to Point
    2 of the area object.
    Number2 is the number of elements along an adjacent edge of the area object.

    Field: Max1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the MeshType item is Maximum Size.
    If the MeshType item is Maximum Size then the area object is to be (internally)
    automatically meshed into elements no larger than the size specified by Max1 and Max2.
    Max1 is the maximum size of elements along the edge of the area object from Point 1 to
    Point 2 of the area object.
    Max2 is the maximum size of elements along an adjacent edge of the area object.

    Field: Max2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the MeshType item is Maximum Size.
    If the MeshType item is Maximum Size then the area object is to be (internally)
    automatically meshed into elements no larger than the size specified by Max1 and Max2.
    Max1 is the maximum size of elements along the edge of the area object from Point 1 to
    Point 2 of the area object.
    Max2 is the maximum size of elements along an adjacent edge of the area object.

    Page 39 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PtsFromLine
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item only applies when the MeshType item is Points On Edges.
    If the MeshType item is Points On Edges then the area object is to be (internally)
    automatically meshed into elements based on points on the edges of the area object.
    If PtsFromLine is specified as Yes then points on the edge are determined from the
    intersection of line objects included in the meshing group and the edges of the area object.
    The line objects in the meshing group are only considered if they lie in the plane of the
    area object.
    If PtsFromPt is specified as Yes then points on the edge are determined from point objects
    included in the meshing group that lie on the edges of the area object. The point objects in
    the meshing group are only considered if they lie in the plane of the area object.

    Field: PtsFromPt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item only applies when the MeshType item is Points On Edges.
    If the MeshType item is Points On Edges then the area object is to be (internally)
    automatically meshed into elements based on points on the edges of the area object.
    If PtsFromLine is specified as Yes then points on the edge are determined from the
    intersection of line objects included in the meshing group and the edges of the area object.
    The line objects in the meshing group are only considered if they lie in the plane of the
    area object.
    If PtsFromPt is specified as Yes then points on the edge are determined from point objects
    included in the meshing group that lie on the edges of the area object. The point objects in
    the meshing group are only considered if they lie in the plane of the area object.

    Field: RotAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    This item only applies when the MeshType item is Cookie Cut Points.
    If the MeshType item is Cookie Cut Points then the area object is to be (internally)
    automatically meshed based on lines that are created by them through point objects that
    are specified in the meshing group. The lines are oriented at an angle in degrees, specified
    by the RotAngle item, from the local 1 and 2 axes of the area object. Positive rotations
    appear counterclockwise when the area object local 3 axis is pointing toward you.
    Page 40 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GenMaxSize
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the MeshType item is General. It is the maximum size of
    element specified for General meshing.

    Field: LocalEdge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Yes means the local axes definitions for the new joints along the edges of the area object
    are to be set the same as an adjacent area object corner point if the local axes definitions
    for the adjacent corners are identical. No means added points have the default local axes
    definition.

    Field: LocalFace
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Yes means the local axes definition for the new joints on the face of the area object are to
    be set the same as a corner point of the area object if the local axes definitions for all
    corner points are identical. No means added points have the default local axes definition.

    Field: SuppEdge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Yes means a restraint degree of freedom (or constraint) is to be added to new joints along
    the edges of the area object if both adjacent corners have that degree of freedom restrained
    (constrained) and the local axes definitions for the adjacent corners and the new joint are
    identical. No means no additional restraints (constraints) are added.

    Field: SuppFace
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Yes means a restraint degree of freedom (or constraint) is to be added to new joints on the
    face of the area object if all area object corners have that degree of freedom restrained
    (constrained) and the local axes definitions for all corners and the new joint are identical.
    No means no additional restraints (constraints) are added.

    Page 41 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SubMesh
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Yes means that after automatic meshing of the area object, if any element is larger than
    what is specified by the SubMeshSize item then that element should be further
    automatically meshed into elements no larger than what is specified by the SubMeshSize
    item.No means no additional submeshing is to be performed.

    Field: SubMeshSize
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the SubMesh item is Yes. It is the maximum size of element
    desired after all meshing is complete.
    Table: Area Bridge Object Flags

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the area object is automatically created from a bridge object. Otherwise
    it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this area object is associated.

    Field: BOSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object with which this area object is associated.

    Page 42 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CompType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Top Slab, Bottom Slab, Girder, Diaphragm, Flange(for steel girder), Web(for
    steel girder) or Internal Diaphragm(for steel U girder) indicating the portion of the bridge
    object with which this area object is associated.

    Field: StartSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The station along the bridge object at which the specified area starts.

    Field: EndSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The station along the bridge object at which the specified area ends.
    Table: Area Edge Constraint Assignments

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: Constrained
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Yes means that line constraints are automatically applied to the edges of the area object.
    Table: Area Loads - Gravity

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Page 43 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the gravity loads are defined.

    Field: MultiplierX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the X-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.

    Field: MultiplierY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the Y-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.

    Field: MultiplierZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the Z-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.
    Table: Area Loads - Pore Pressure

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Page 44 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Pressure
    Field is Imported: Yes
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    The pore pressure load applied to the specified face of the Area object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified pressure. If no joint
    pattern is specified then this item is reported as None.
    Table: Area Loads - Rotate

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: AngularVel
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The height of the section at the base of the column. The number of cores that can fit into
    the column is based on this height.
    Table: Area Loads - Strain

    Page 45 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The area object local component to which the specified strain load is applied. This is
    either Strain11, Strain22, Strain12, Curvature11, Curvature22, Curvature12, Strain13 or
    Strain23.

    Field: Strain
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strain load applied to the specified component of the object.

    Field: Curvature
    Field is Imported: Yes
    Format: 1/Length (Miscellaneous section of form)
    Units: 1/Length
    The strain load (curvature) applied to the specified component of the object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified strain or curvature. If
    no joint pattern is specified then this item is reported as None.
    Table: Area Loads - Surface Pressure

    Page 46 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Face
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The face of the area object to which the surface pressure load is applied. This is either
    Bottom, Top or one of the edge face numbers.

    Field: Pressure
    Field is Imported: Yes
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    The surface pressure load applied to the specified face of the Area object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified pressure. If no joint
    pattern is specified then this item is reported as None.
    Table: Area Loads - Temperature

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Page 47 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Temperature or Gradient indicating the type of load.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature Change (Forces section of form)
    Units: Temp
    temperature Label of the load pattern to which the specified auto seismic load applies Area
    object.

    Field: TempGrad3
    Field is Imported: Yes
    Format: Temperature Gradient (Forces section of form)
    Units: Temp/Length
    temperature gradient in the local 3 direction (units are delta temperature/thickness 3-3)
    Label of the load pattern to which the specified auto seismic load applies Area object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified temperature. If no joint
    pattern is specified then this item is reported as None.
    Table: Area Loads - Uniform

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Page 48 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the load is defined. Local means that the load is
    specified in an object local axis direction.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 1, 2, 3, X, Y, Z, X Proj, Y Proj, Z Proj, Gravity or Grav Proj indicating the
    direction of the load. 1, 2 and 3 indicate the local axes directions of the area object. X, Y
    and Z indicate the X, Y and Z directions of the specified coordinate system. Gravity is in
    the negative global Z direction. X Proj, Y Proj or Z Proj are projected forces in the
    specified coordinate system. Projected forces are scaled by the sine of the angle between
    the object and the direction of load.

    Field: UnifLoad
    Field is Imported: Yes
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    The uniform load that is applied to the area object in the specified direction.
    Table: Area Loads - Uniform To Frame

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Page 49 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the load is defined. Local means that the load is
    specified in an object local axis direction.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 1, 2, 3, X, Y, Z, X Proj, Y Proj, Z Proj, Gravity or Grav Proj indicating the
    direction of the load. 1, 2 and 3 indicate the local axes directions of the area object. X, Y
    and Z indicate the X, Y and Z directions of the specified coordinate system. Gravity is in
    the negative global Z direction. X Proj, Y Proj or Z Proj are projected forces in the
    specified coordinate system. Projected forces are scaled by the sine of the angle between
    the object and the direction of load.

    Field: UnifLoad
    Field is Imported: Yes
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    The uniform load, in the specified direction, that is distributed to the surrounding frame
    objects.

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either One Way or Two Way indicating the type of distribution used for the load.
    Table: Area Loads - Wind Pressure Coefficients

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.
    Page 50 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Windward
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the area object receiving the load is on the windward side of the
    structure. Otherwise it is No.
    Typically, building codes specify the wind pressure on the windward side of the structure
    varies over the height of the structure, whereas it is constant over the structure height on
    other sides.

    Field: Cp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The wind pressure coefficient specified for the area object.

    Field: XComponent
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The global X component of the wind pressure coefficient.

    Field: YComponent
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The global Y component of the wind pressure coefficient.

    Field: ZComponent
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The global Z component of the wind pressure coefficient.
    Table: Area Local Axes Assignments 1 - Typical

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Page 51 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle that the local 1 and 2 axes are rotated about the positive local 3 axis, from the
    default orientation or from the orientation determined by the plane reference vector. The
    rotation for a positive angle appears counterclockwise when the local +3 axis is pointing
    toward you.

    Field: AdvanceAxes
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if an advanced method is used to define the local axes reference vectors
    for the area object. Otherwise it is No meaning that the default reference vectors are used.
    Default means that the local 3-2 plane for the area object is taken to be vertical, that is,
    parallel to the global Z-axis. The local 2 axis is taken to have an upward sense (global +Z)
    unless the object is horizontal (lies in the global X-Y plane) in which case the local 2 axis
    is taken along the global +Y direction. The local 1 axis is horizontal, that is it lies in the
    global X-Y plane.
    Advanced means that the local axes are defined with respect to user-defined reference
    vectors. Note that when the advanced system is used, the specified Angle is applied to the
    local axes orientation defined by the user specified reference vectors.
    Table: Area Local Axes Assignments 2 - Advanced

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: LocalPlane
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the local plane that is to be determined by the plane reference vector.
    It is either 31 or 32, indicating the 3-1 or the 3-2 plane, respectively.

    Page 52 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlOption1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Coord Dir, Two Joints or User Vector indicating the first method used to
    determine the plane reference vector.

    Field: PlCoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system used to define the plane reference vector coordinate directions and
    the plane user vector.

    Field: CoordDir1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    primary coordinate direction taken at the object center in the specified coordinate system.
    It is used to determine the reference vector. It may be one of +X, +Y, +Z, +CR, +CA,
    +CZ, +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Field: CoordDir2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    secondary coordinate direction taken at the object center in the specified coordinate
    system. It is used to determine the reference vector. It may be one of +X, +Y, +Z, +CR,
    +CA, +CZ, +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Field: PlVecJt1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    PlVecJt1 and PlVecJt2 are the labels of two joints that define the plane reference vector.
    Either of these joints may be specified as None to indicate the center of the specified
    object. If both PlVecJt1 and PlVecJt2 are specified as None then they are not used to
    define the plane reference vector.

    Page 53 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlVecJt2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    PlVecJt1 and PlVecJt2 are the labels of two joints that define the plane reference vector.
    Either of these joints may be specified as None to indicate the center of the specified
    object. If both PlVecJt1 and PlVecJt2 are specified as None then they are not used to
    define the plane reference vector.

    Field: PlVecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    X direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.

    Field: PlVecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Y direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.

    Field: PlVecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Z direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.
    Table: Area Material Temperatures

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The Area object material temperature.

    Page 54 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified temperature. If no joint
    pattern is specified then this item is reported as None.
    Table: Area Overwrites - Joint Offsets

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: OffsetOver
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either None, Pattern, or Object indicating if and how the area object joint
    offset is specified. If the None option is chosen then no area object joint offsets exist.
    Pattern means the joint offset at each of the area object corner points is specified using a
    joint pattern. Object means the joint offset at each of the area object corner points is
    directly specified.
    The joint offset is measured from the center of the area object thickness to the joint
    location. A positive offset is in the positive local 3-axis direction.

    Field: OffsetPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern that is multiplied by the specified length scale factor specified by
    the OffsetPatSF item to obtain the area object joint offsets.
    This item is only applicable when the OffsetOver item is By Pattern.
    The joint offset is measured from the center of the area object thickness to the joint
    location. A positive offset is in the positive local 3-axis direction.

    Page 55 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OffsetPatSF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The scale factor that multiplies the joint pattern specified by the OffsetPat item to obtain
    the area object joint offsets.
    This item is only applicable when the OffsetOver item is By Pattern.
    The joint offset is measured from the center of the area object thickness to the joint
    location. A positive offset is in the positive local 3-axis direction.

    Field: Offset1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Use the Offset1, Offset2, Offset3 and Offset4 fields to list the area object joint offsets at
    corner points 1, 2, 3 and 4 (if it exists) around the area object. If the area object has more
    than four corner points then use multiple records to list all of the points. Be sure the the
    area object label is entered for each record associated with the object.
    This item is only applicable when the OffsetOver item is Object.
    The joint offset is measured from the center of the area object thickness to the joint
    location. A positive offset is in the positive local 3-axis direction.

    Field: Offset2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Use the Offset1, Offset2, Offset3 and Offset4 fields to list the area object joint offsets at
    corner points 1, 2, 3 and 4 (if it exists) around the area object. If the area object has more
    than four corner points then use multiple records to list all of the points. Be sure the the
    area object label is entered for each record associated with the object.
    This item is only applicable when the OffsetOver item is Object.
    The joint offset is measured from the center of the area object thickness to the joint
    location. A positive offset is in the positive local 3-axis direction.

    Field: Offset3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Use the Offset1, Offset2, Offset3 and Offset4 fields to list the area object joint offsets at
    corner points 1, 2, 3 and 4 (if it exists) around the area object. If the area object has more
    Page 56 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    than four corner points then use multiple records to list all of the points. Be sure the the
    area object label is entered for each record associated with the object.
    This item is only applicable when the OffsetOver item is Object.
    The joint offset is measured from the center of the area object thickness to the joint
    location. A positive offset is in the positive local 3-axis direction.

    Field: Offset4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Use the Offset1, Offset2, Offset3 and Offset4 fields to list the area object joint offsets at
    corner points 1, 2, 3 and 4 (if it exists) around the area object. If the area object has more
    than four corner points then use multiple records to list all of the points. Be sure the the
    area object label is entered for each record associated with the object.
    This item is only applicable when the OffsetOver item is Object.
    The joint offset is measured from the center of the area object thickness to the joint
    location. A positive offset is in the positive local 3-axis direction.
    Table: Area Overwrites - Thickness

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: ThickOver
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either None, Pattern, or Object indicating if and how the area object thickness
    specified by the area section property assigned to the area object is overwritten. If the
    None option is chosen then the area object thickness is not overwritten. Pattern means the
    thickness at each of the area object corner points is specified using a joint pattern. Object
    means the thickness at each of the area object corner points is directly specified.

    Field: ThickPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern that is multiplied by the specified thickness scale factor specified
    by the ThickPatSF item to obtain the area object thickness.
    Page 57 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    This item is only applicable when the ThickOver item is By Pattern.

    Field: ThickPatSF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The scale factor that multiplies the joint pattern specified by the ThickPat item to obtain
    the area object thickness.
    This item is only applicable when the ThickOver item is By Pattern.

    Field: Thick1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Shear Stress Overwrites (Major,Minor)
    This item is only applicable when the ThickOver item is Object.

    Field: Thick2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Shear Stress Overwrites (Major,Minor)
    This item is only applicable when the ThickOver item is Object.

    Field: Thick3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Shear Stress Overwrites (Major,Minor)
    This item is only applicable when the ThickOver item is Object.

    Field: Thick4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Shear Stress Overwrites (Major,Minor)
    This item is only applicable when the ThickOver item is Object.
    Table: Area Section Assignments

    Page 58 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the area section property assigned to the specified area object.

    Field: MatProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Default, or the name of a Material. Default means that the material
    property for the area object is taken from the material property designated for the area
    section that is assigned to the area object.
    Table: Area Section Properties

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the area section property.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property assigned to the area section property.

    Field: MatAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Material angle associated with the area section property.

    Page 59 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Shell, Plane or Asolid indicating the type of area section.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    For shell-type area sections this is either Shell-Thin, Shell-Thick, Membrane, Plate-Thin,
    or Plate-Thick indicating the type of shell element.
    For shell-type area sections this is either Shell-Thin, Shell-Thick, Membrane, Plate-Thin,
    or Plate-Thick indicating the type of shell element.
    This item does not apply to asolid-type elements.

    Field: DrillDOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if drilling degrees are included in the analysis model element formulation.
    Otherwise it is No.
    This item only applies when the AreaType item is Shell and the Type item is either ShellThin, Shell-Thick or Membrane.

    Field: Thickness
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    For shell-type area sections this is the membrane thickness of the element used for
    calculating the membrane stiffness for full-shell and pure-membrane sections, and used for
    self-mass and self-weight calculations.
    For plane-type sections this is the thickness of the element. This item does not apply to
    asolid-type area sections.

    Page 60 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BendThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies to shell-type area sections. It is the bending thickness of the section
    used for calculating the plate-bending and transverse shear stiffnesses for full-shell and
    pure-plate sections.

    Field: Arc
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    This item only applies to asolid-type area sections. It is the object arc, that is, the number
    of degrees through which the object's planar shape is rotated to define the solid-type
    object. Inputting 0 for this item means that the arc will be taken as 1 radian.

    Field: InComp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if incompatible bending modes are included in the stiffness formulation.
    Otherwise it is No. It only applies to plane and asolid type sections.
    In general, incompatible modes significantly improve the bending behavior of the object.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies to asolid-type area sections. The asolid axis of symmetry is the Z
    axis of this coordinate system.

    Field: Color
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color associated with the
    section.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Page 61 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalWt
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    Total weight of all objects in the model that are assigned the specified area section
    property. This item is only available when the analysis model exists.

    Field: TotalMass
    Field is Imported: No
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    Total mass of all objects in the model that are assigned the specified area section property.
    This item is only available when the analysis model exists.

    Field: F11Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    F11 stiffness modifier for the specified area section property. This item is used for analysis
    only, not design. This item is multiplied times the similar modifier specified for the area
    section; it does not replace the modifier specified for the area section.

    Field: F22Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    F22 stiffness modifier for the specified area section property. This item is used for analysis
    only, not design. This item is multiplied times the similar modifier specified for the area
    section; it does not replace the modifier specified for the area section.

    Field: F12Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    F12 stiffness modifier for the specified area section property. This item is used for analysis
    only, not design. This item is multiplied times the similar modifier specified for the area
    section; it does not replace the modifier specified for the area section.

    Page 62 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M11Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    M11 stiffness modifier for the specified area section property. This item is used for
    analysis only, not design. This item is multiplied times the similar modifier specified for
    the area section; it does not replace the modifier specified for the area section.

    Field: M22Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    M22 stiffness modifier for the specified area section property. This item is used for
    analysis only, not design. This item is multiplied times the similar modifier specified for
    the area section; it does not replace the modifier specified for the area section.

    Field: M12Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    M12 stiffness modifier for the specified area section property. This item is used for
    analysis only, not design. This item is multiplied times the similar modifier specified for
    the area section; it does not replace the modifier specified for the area section.

    Field: V13Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    V13 stiffness modifier for the specified area section property. This item is used for
    analysis only, not design. This item is multiplied times the similar modifier specified for
    the area section; it does not replace the modifier specified for the area section.

    Field: V23Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    V23 stiffness modifier for the specified area section property. This item is used for
    analysis only, not design. This item is multiplied times the similar modifier specified for
    the area section; it does not replace the modifier specified for the area section.

    Page 63 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Mass multiplier for the specified area section property. This item is used for analysis only,
    not design. This item is multiplied times the similar modifier specified for the area section;
    it does not replace the modifier specified for the area section.

    Field: WMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Weight multiplier for the specified area section property. This item is used for analysis
    only, not design. This item is multiplied times the similar modifier specified for the area
    section; it does not replace the modifier specified for the area section.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified .

    Field: Notes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    User notes for the specified .
    Table: Area Section Property Design Parameters

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the shell-type area section property.

    Field: RebarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property for the rebar in the area section property.

    Page 64 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RebarOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Default, One Layer or Two Layers indicating the rebar layout. Default uses
    two rebar layers with the cober to the centroid of the reinforcing steel set to 0.1 times the
    thickness of the section.

    Field: CoverTop1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The cover to the centroid of the top reinforcing steel running in the local 1 axis direction
    of the shell section.

    Field: CoverTop2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The cover to the centroid of the top reinforcing steel running in the local 2 axis direction
    of the shell section.

    Field: CoverBot1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The cover to the centroid of the bottom reinforcing steel running in the local 1 axis
    direction of the shell section.

    Field: CoverBot2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The cover to the centroid of the bottom reinforcing steel running in the local 2 axis
    direction of the shell section.
    Table: Area Section Property Layers

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the area section property.

    Page 65 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LayerName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the layer.

    Field: Distance
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the shell reference surface (shell object joint location plus offsets) to the
    midheight of the layer. Positive distances are in the positive shell object local 3 axis
    direction.

    Field: Thickness
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the layer.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Shell, Membrane or Plate indicating the layer type.

    Field: NumIntPts
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of integration points in the thickness direction for the layer. The locations are
    determined by the program using standard Guass-quadrature rules.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property assigned to the layer.

    Page 66 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MatAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Material angle associated with the layer. The angle is measured counterclockwise from
    the local 1 axis of the shell object to the local 1 axis of the material.

    Field: S11Opt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Inactive, Linear or Nonlinear indicating the behavior of the material S11
    component.

    Field: S22Opt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Inactive, Linear or Nonlinear indicating the behavior of the material S22
    component.

    Field: S12Opt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Inactive, Linear or Nonlinear indicating the behavior of the material S12
    component.
    Table: Area Section Properties - Bridge Object Flags

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the area section property.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the area section is an automatically created bridge section. Otherwise it
    is No.

    Page 67 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this area section is associated.
    Table: Area Spring Assignments

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Simple or Link Property indicating the type of spring specified.

    Field: Stiffness
    Field is Imported: Yes
    Format: Trans Stiffness/Area (Stiffness section of form)
    Units: Force/Length/Length2
    Spring stiffness per unit area on the specified face of the area object in the direction
    specified. This item only applies when the Type item is Simple.

    Field: SimpleType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Tension and Compression, Compression Only, or Tension Only indicating
    the type of simple spring specified.

    Field: LinkProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the link property assigned to the spring. This item only applies when the
    Type item is Link Property.

    Page 68 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Face
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The face of the area object to which the specified springs are applied. This is either
    Bottom, Top or one of the edge face numbers.

    Field: Dir1Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Object Axes, Normal To Face, or User Vector indicating the method used to
    define the tension direction for simple springs or the link local 1-axis direction for Link
    Property springs.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either -3, -2, -1, 1, 2 or 3 indicating the tension direction for simple springs or the
    link local 1-axis direction for Link Property springs. The -3, -2, -1, 1, 2 and 3 items refer
    to the area object local axes directions.
    This item only applies when the Dir1Type item is Object Axes.

    Field: NormalDir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Inward, or Outward indicating the orientation of the tension direction for
    simple springs or the link local 1-axis direction for Link Property springs when they are
    oriented normal to a face.
    This item only applies when the Dir1Type item is Normal To Face.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system in which a user vector is specified to define the tension direction
    for simple springs or the link local 1-axis direction for Link Property springs.
    This item only applies when the Dir1Type item is User Vector.

    Page 69 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    VecX, VecY and VecZ define the X, Y and Z (or 1, 2 and 3) components of the user
    specified direction vector for the tension direction for simple springs or the link local 1axis direction for Link Property springs. VecX, VecY and VecZ are in the coordinate
    system specified by the CoordSys item.
    This item only applies when the Dir1Type item is User Vector.

    Field: VecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    VecX, VecY and VecZ define the X, Y and Z (or 1, 2 and 3) components of the user
    specified direction vector for the tension direction for simple springs or the link local 1axis direction for Link Property springs. VecX, VecY and VecZ are in the coordinate
    system specified by the CoordSys item.
    This item only applies when the Dir1Type item is User Vector.

    Field: VecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    VecX, VecY and VecZ define the X, Y and Z (or 1, 2 and 3) components of the user
    specified direction vector for the tension direction for simple springs or the link local 1axis direction for Link Property springs. VecX, VecY and VecZ are in the coordinate
    system specified by the CoordSys item.
    This item only applies when the Dir1Type item is User Vector.

    Field: Axis2Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle in degrees that the link local 2 axis is rotated from its default orientation. This
    item only applies when the Type item is Link Property.
    Table: Area Stiffness Modifiers

    Page 70 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: f11
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The membrane f11 modifier for the specified area object.

    Field: f22
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The membrane f22 modifier for the specified area object.

    Field: f12
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The membrane f12 modifier for the specified area object.

    Field: m11
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The bending m11 modifier for the specified area object.

    Field: m22
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The bending m22 modifier for the specified area object.

    Field: m12
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The bending m12 modifier for the specified area object.

    Page 71 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: v13
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shear v13 modifier for the specified area object.

    Field: v23
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shear v23 modifier for the specified area object.

    Field: MassMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The mass modifier for the specified area object.

    Field: WeightMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The weight modifier for the specified area object.
    Table: Area Stiffness Modifier Definitions

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined area stiffness modifier.

    Field: f11
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The membrane f11 modifier for an area object.

    Field: f22
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The membrane f22 modifier for an area object.
    Page 72 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: f12
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The membrane f12 modifier for an area object.

    Field: m11
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The bending m11 modifier for an area object.

    Field: m22
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The bending m22 modifier for an area object.

    Field: m12
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The bending m12 modifier for an area object.

    Field: v13
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shear v13 modifier for an area object.

    Field: v23
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shear v23 modifier for an area object.

    Field: MassMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The mass modifier for an area object.

    Page 73 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WeightMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The weight modifier for an area object.
    Table: Area Vehicle Response Component Overwrites

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: Usage
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either AASHTO HL - Superstructure, AASHTO HL - Reaction, or AASHTO H &
    HS Superstructure indicating the vehicle type and structural member type to which the
    overwrite applies.
    AASHTO HL - Superstructure refers to the superstructure negative moments over
    supports and applies to AASHTO H, HS and HL loading.
    AASHTO HL - Reaction refers to reactions at interior supports (piers) and applies only to
    AASHTO HL loaoding.
    AASHTO H & HS Superstructure refers to superstructure moments (positive or negative)
    and applies to AASHTO H and HS loading.

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either F11, F22, F12, M11, M22, M12, V13, V23, S11Top, S22Top, S12Top,
    S11Bot, S22Bot, or S12Bot indicating the output component to which the overwrite
    applies.

    Page 74 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Do Not Use, Use Positive Values, Use Negative Values, or Use All Values
    indicating the portion of the output for the specified component to which the overwrite
    applies.
    Table: Auto Combination Option Data 01 - General

    Field: DesignType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Type of design code.

    Field: AutoGen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Automatically generate code-based load combinations.
    Table: Auto Combination Option Data 02 - User Data

    Field: DesignType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Type of design code.

    Field: LSType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Limit states for which automatic load combinations are to be generated.

    Field: LCName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Selected load cases for automatic load combinations generation.
    Table: Auto Combination Option Parameters for AASHTO STD 2002

    Page 75 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Type of design code.

    Field: BetaE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: BetaD
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: LIFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .
    Table: Auto Combination Option Parameters for AASHTO LRFD 2007

    Field: DesignType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Type of design code.

    Field: GammaEQ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: GammaSE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .
    Page 76 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DD
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: EH
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: EV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: GammaTG1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: GammaTG2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: GammaTG3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .
    Table: Auto Combination Option Parameters for Chinese JTG

    Field: DesignType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Type of design code.
    Page 77 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IMOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Frequency
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: IMFactUser
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: IMFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: Curved
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Is for curved bridge.
    Table: Auto Seastate

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seastate load applies.

    Field: ParamOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The method used to define the pitch, roll, and yaw loading.
    Page 78 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the auto seastate loading is defined.

    Field: CenterX
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The x-coordinate, in the selected coordinate system, of the center of rotation.

    Field: CenterY
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The y-coordinate, in the selected coordinate system, of the center of rotation.

    Field: CenterZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The z-coordinate, in the selected coordinate system, of the center of rotation.

    Field: RotX
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The rotation angle, in degrees, about the x-axis defining the motion amplitude.

    Field: PeriodX
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The period of rotation about the x-axis for a full motion cycle.

    Field: RotY
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The rotation angle, in degrees, about the y-axis defining the motion amplitude.

    Page 79 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PeriodY
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The period of rotation about the y-axis for a full motion cycle.

    Field: Heave
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The heave amplitude.

    Field: HeavePer
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The heave period for a full motion cycle.

    Field: AccelUX
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The translational acceleration in the x-direction of the specified coordinate system.

    Field: AccelUY
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The translational acceleration in the y-direction of the specified coordinate system.

    Field: AccelUZ
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The translational acceleration in the z-direction of the specified coordinate system.

    Field: AccelRX
    Field is Imported: Yes
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    The rotational acceleration about the x-axis of the specified coordinate system.

    Page 80 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AccelRY
    Field is Imported: Yes
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    The rotational acceleration about the y-axis of the specified coordinate system.

    Field: AccelRZ
    Field is Imported: Yes
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    The rotational acceleration about the z-axis of the specified coordinate system.

    Field: VelRX
    Field is Imported: Yes
    Format: Velocity-Rot (Time-Related section of form)
    Units: rad/sec
    The rotational velocity about the x-axis of the specified coordinate system.

    Field: VelRY
    Field is Imported: Yes
    Format: Velocity-Rot (Time-Related section of form)
    Units: rad/sec
    The rotational velocity about the y-axis of the specified coordinate system.

    Field: VelRZ
    Field is Imported: Yes
    Format: Velocity-Rot (Time-Related section of form)
    Units: rad/sec
    The rotational velocity about the z-axis of the specified coordinate system.
    Table: Auto Seismic - AS 1170 2007

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Page 81 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Approximate, Prog Calc (short for
    program calculated), or User.

    Field: kt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The kt factor used in calculating the building period.

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Page 82 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D or E indicating the Site Sub Soil Class.

    Field: ProbFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The AS 1170.4 2007 probability factor, kp, specified in Table 3.1.

    Field: HazFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The AS 1170.4 2007 hazard factor, Z, specified in Table 3.2.

    Page 83 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StPerFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The AS 1170.4 2007 structure performance factor, Sp, specified in Table 6.5.

    Field: StDucFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The AS 1170.4 2007 structure ductility factor, u, specified in Table 6.5.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    AS 1170.4 2007 coefficient Ch(T) * kp * z * Sp / u used to calculate the seismic base
    shear. This item is only available after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - BOCA96

    Page 84 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Method A, Prog Calc (short for
    program calculated), or User.

    Field: Ct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Ct factor used in calculating the building period (in English units).

    Page 85 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The BOCA96 response modification factor.

    Field: Aa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The BOCA96 effective peak acceleration coefficient.

    Page 86 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Av
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The BOCA96 effective peak velocity-related coefficient.

    Field: S
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The BOCA96 site coefficient.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    BOCA96 coefficient Cs used to calculate the seismic base shear. This item is only
    available after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - Chinese 2010

    Page 87 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Prog Calc (short for program
    calculated), or User.

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Page 88 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: AlphaMax
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Chinese 2010 maximum influence factor.

    Field: SI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following items indicating the Chinese 2002 seismic intensity:
    6 (0.05g),
    7 (0.10g),
    7 (0.15g),
    8 (0.20g),
    8 (0.30g), Product of Inertia about 2-3
    9 (0.40g).

    Page 89 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DampRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Chinese 2010 damping ratio.

    Field: Tg
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The Chinese 2010 characteristic ground period.

    Field: PTDF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Chinese 2010 period time discount factor.

    Field: EnhanceFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Chinese 2010 enhancement factor.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Chinese 2010 Seismic coefficient used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Page 90 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - Eurocode8 2004

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Page 91 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Approximate, Prog Calc (short for
    program calculated), or User.

    Field: Ct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Ct factor used in calculating the building period (in meters).

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.
    Page 92 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Country
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either CEN Default, Norway or Other indicating the country for which the
    Nationally Determined Parameters (NDPs) are specified.

    Field: Ag
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The EuroCode8-2004 design ground acceleration in g, ag.

    Field: SpecType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The EuroCode8-2004 spectrum type. This is either 1 or 2.

    Field: GroundType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The EuroCode8-2004 ground type. This is either A, B, C, D or E.

    Field: SoilFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The EuroCode8-2004 soil factor, S.

    Field: Tb
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The lower limit of period on the constant spectral acceleration branch, Tb.

    Field: Tc
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The upper limit of period on the constant spectral acceleration branch, Tc.
    Page 93 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Td
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period defining the start of the constant displacement range, Td.

    Field: LBFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The EuroCode8-2004 lower bound factor, Beta.

    Field: BehaveFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The EuroCode8-2004 behavior factor, q.

    Field: CorrFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The EuroCode8-2004 correction factor, Lambda.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Eurocode8 2004 coefficient Sd(T) used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Page 94 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - IBC2003

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Page 95 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Method A, Prog Calc (short for
    program calculated), or User.

    Field: Ct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Ct factor used in calculating the building period (in English units).

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.
    Page 96 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2003 response modification factor.

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2003 system overstrength factor used for design.

    Field: Cd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2003 deflection amplification factor used for design.

    Field: SeisGroup
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The IBC2003 seismic group.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The IBC2003 site class.

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2003 mapped spectral acceleration for short periods.

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2003 mapped spectral acceleration for a one second period.

    Page 97 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2003 site coefficient, Fa.

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2003 site coefficient, Fv.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    IBC2003 coefficient Cs used to calculate the seismic base shear. This item is only
    available after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - IBC2006

    Page 98 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Approximate, Prog Calc (short for
    program calculated), or User.

    Field: CtAndX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The item is the value of Ct an x used to calculate the approximate period, Ta, where Ta =
    Ct * h^x. This item is either '0.028ft, 0.8'; '0.016ft, 0.9'; '0.03ft, 0.75'; or '0.02ft, 0.75'.

    Page 99 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2006 response modification factor.

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2006 system overstrength factor used for design.

    Page 100 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2006 deflection amplification factor used for design.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2006 occupancy importance factor.

    Field: AccOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Latitude/Longitude, Zip Code or User indicating the option used to
    determine the Ss and S1 spectral accelerations.

    Field: Latitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Field: Longitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Field: ZipCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The 5-digit zip code of the site where the response spectrum is desired.
    This item is only applicable when the AccOption item is Zip Code.
    Note that the Ss and S1 values used for this option are those at the center of the specified
    zip codes; they are not maximum or minimum values. For some zip codes (such as those
    in coastal California) there may be significance variation of Ss and S1 over the zip code.

    Page 101 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Thus the zip code option should be used with care. In general, the Latitude/Longitude
    method is recommended.

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 0.2-second period spectral acceleration for the site. This item is only imported when
    the AccOption item is User.

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 1-second period spectral acceleration for the site. This item is only imported when the
    AccOption item is User.

    Field: TL
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The long-period transition period.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D, E or F indicating the site class for the considered site.

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fa.This item is only imported when the SiteClass item is F.

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fv. This item is only imported when the SiteClass item is F.

    Page 102 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The design response spectrum acceleration at short periods. SDS = (2/3) * Fa * Ss.

    Field: SD1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The design response spectrum acceleration at 1-second period. SD1 = (2/3) * Fv * S1.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    IBC2003 coefficient Cs used to calculate the seismic base shear. This item is only
    available after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - IBC2009

    Page 103 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Approximate, Prog Calc (short for
    program calculated), or User.

    Field: CtAndX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The item is the value of Ct an x used to calculate the approximate period, Ta, where Ta =
    Ct * h^x. This item is either '0.028ft, 0.8'; '0.016ft, 0.9'; '0.03ft, 0.75'; or '0.02ft, 0.75'.

    Page 104 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2006 response modification factor.

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2006 system overstrength factor used for design.

    Page 105 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2006 deflection amplification factor used for design.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2006 occupancy importance factor.

    Field: AccOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Latitude/Longitude, Zip Code or User indicating the option used to
    determine the Ss and S1 spectral accelerations.

    Field: Latitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Field: Longitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Field: ZipCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The 5-digit zip code of the site where the response spectrum is desired.
    This item is only applicable when the AccOption item is Zip Code.
    Note that the Ss and S1 values used for this option are those at the center of the specified
    zip codes; they are not maximum or minimum values. For some zip codes (such as those
    in coastal California) there may be significance variation of Ss and S1 over the zip code.

    Page 106 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Thus the zip code option should be used with care. In general, the Latitude/Longitude
    method is recommended.

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 0.2-second period spectral acceleration for the site. This item is only imported when
    the AccOption item is User.

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 1-second period spectral acceleration for the site. This item is only imported when the
    AccOption item is User.

    Field: TL
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The long-period transition period.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D, E or F indicating the site class for the considered site.

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fa.This item is only imported when the SiteClass item is F.

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fv. This item is only imported when the SiteClass item is F.

    Page 107 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The design response spectrum acceleration at short periods. SDS = (2/3) * Fa * Ss.

    Field: SD1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The design response spectrum acceleration at 1-second period. SD1 = (2/3) * Fv * S1.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    IBC2003 coefficient Cs used to calculate the seismic base shear. This item is only
    available after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - IBC2012

    Page 108 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Approximate, Prog Calc (short for
    program calculated), or User.

    Field: CtAndX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The item is the value of Ct an x used to calculate the approximate period, Ta, where Ta =
    Ct * h^x. This item is either '0.028ft, 0.8'; '0.016ft, 0.9'; '0.03ft, 0.75'; or '0.02ft, 0.75'.

    Page 109 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2006 response modification factor.

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2006 system overstrength factor used for design.

    Page 110 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2006 deflection amplification factor used for design.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2006 occupancy importance factor.

    Field: AccOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Latitude/Longitude, Zip Code or User indicating the option used to
    determine the Ss and S1 spectral accelerations.

    Field: Latitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Field: Longitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Field: ZipCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The 5-digit zip code of the site where the response spectrum is desired.
    This item is only applicable when the AccOption item is Zip Code.
    Note that the Ss and S1 values used for this option are those at the center of the specified
    zip codes; they are not maximum or minimum values. For some zip codes (such as those
    in coastal California) there may be significance variation of Ss and S1 over the zip code.

    Page 111 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Thus the zip code option should be used with care. In general, the Latitude/Longitude
    method is recommended.

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 0.2-second period spectral acceleration for the site. This item is only imported when
    the AccOption item is User.

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 1-second period spectral acceleration for the site. This item is only imported when the
    AccOption item is User.

    Field: TL
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The long-period transition period.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D, E or F indicating the site class for the considered site.

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fa.This item is only imported when the SiteClass item is F.

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fv. This item is only imported when the SiteClass item is F.

    Page 112 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The design response spectrum acceleration at short periods. SDS = (2/3) * Fa * Ss.

    Field: SD1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The design response spectrum acceleration at 1-second period. SD1 = (2/3) * Fv * S1.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    IBC2003 coefficient Cs used to calculate the seismic base shear. This item is only
    available after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - IS1893:2002

    Page 113 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Approximate, Prog Calc (short for
    program calculated), or User.

    Field: Ct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Ct factor used in calculating the building period (in meters).

    Page 114 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: ZCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 0.10, 0.16, 0.24 0r 0.36 indicating the seismic zone factor, Z, as specified in
    the IS1893 2002 code.

    Field: ZUser
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The user specified seismic zone factor, Z.

    Page 115 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SoilType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either I, II or III indicating the soil type.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IS1893 2002 importance factor.

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IS1893 2002 response reduction factor.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    IS1893 2002 coefficient Ah used to calculate the seismic base shear. This item is only
    available after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Page 116 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - ITALIAN NTC 2008

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Approximate, Prog Calc (short for
    program calculated), or User.
    Page 117 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The item is the value of C1 used to calculate the approximate period, Ta.

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: AccOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Page 118 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Latitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: Longitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: Island
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: agOverg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: F0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: Tcs
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: LimitState
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Page 119 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UsageClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: NominalLife
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: SpectrumType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: SoilType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Topography
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: hOverH
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: Tb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The lower limit of period on the constant spectral acceleration branch, Tb.

    Page 120 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Tc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The upper limit of period on the constant spectral acceleration branch, Tc.

    Field: Td
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The period defining the start of the constant displacement range, Td.

    Field: Xi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: q
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: Lambda
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Page 121 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient Cs used to calculate the seismic base shear. This item is only available after
    the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - NBCC 2010

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Page 122 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: StructType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Steel MF, Concrete MF, Other MF, Braced Frame or Shear Wall indicating
    the type of structure. MF is short for moment frame.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Approximate, Prog Calc (short for
    program calculated), or User.

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Page 123 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: PGA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The peak ground acceleration.

    Field: Sa02
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 0.2 seconds.

    Field: Sa05
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 0.5 seconds.

    Field: Sa1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 1 second.

    Page 124 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Sa2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 2 seconds.

    Field: Sa4
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 4 seconds.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D, E or F indicating the site class.

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fa.
    This item is only imported when the Site Class item is F.

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fv.
    This item is only imported when the Site Class item is F.

    Field: Ie
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The importance factor, Ie.

    Page 125 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The higher mode factor, Mv.

    Field: Rd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ductility modifier, Rd.

    Field: Ro
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The overstrength modifier, Ro.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    NBCC 2010 V/W used to calculate the seismic base shear. This item is only available
    after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Page 126 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.

    Field: FtUsed
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The Ft force (concentrated force at the top of the building) calculated for the specified
    auto seismic load. This item is only available after the analysis has been run.
    Table: Auto Seismic - NBCC 2005

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Page 127 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StructType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Steel MF, Concrete MF, Other MF, Braced Frame or Shear Wall indicating
    the type of structure. MF is short for moment frame.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Approximate, Prog Calc (short for
    program calculated), or User.

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Page 128 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: PGA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The peak ground acceleration.

    Field: Sa02
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 0.2 seconds.

    Field: Sa05
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 0.5 seconds.

    Field: Sa1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 1 second.

    Field: Sa2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 2 seconds.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D, E or F indicating the site class.
    Page 129 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fa.
    This item is only imported when the Site Class item is F.

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fv.
    This item is only imported when the Site Class item is F.

    Field: Ie
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The importance factor, Ie.

    Field: Mv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The higher mode factor, Mv.

    Field: Rd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ductility modifier, Rd.

    Field: Ro
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The overstrength modifier, Ro.

    Page 130 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    NBCC 2005 V/W used to calculate the seismic base shear. This item is only available
    after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.

    Field: FtUsed
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The Ft force (concentrated force at the top of the building) calculated for the specified
    auto seismic load. This item is only available after the analysis has been run.
    Table: Auto Seismic - NBCC95

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Page 131 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: StructType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Mom Frame or Other indicating the type of structure.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Approximate, Prog Calc (short for
    program calculated), or User.

    Field: Ds
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Length of wall or braced frame which constitutes the main lateral-force resisting system.

    Page 132 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    NBCC 95 force modification factor.

    Field: Za
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    NBCC95 acceleration-related seismic zone.

    Page 133 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Zv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    NBCC95 velocity-related seismic zone.

    Field: VType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates whether the NBCC95 zonal velocity ratio is program calculated based
    on Zv, or it is user-defined.

    Field: V
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    NBCC95 zonal velocity ratio.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    NBCC95 importance factor.

    Field: F
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    NBCC95 foundation factor.

    Field: VeOverWUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The Ve factor divided by W (weight) used to calculate the base shear. This item is only
    available after the analysis has been run.

    Page 134 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.

    Field: FtUsed
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The Ft force (concentrated force at the top of the building) calculated for the specified
    auto seismic load. This item is only available after the analysis has been run.
    Table: Auto Seismic - NEHRP97

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Page 135 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Method A, Prog Calc (short for
    program calculated), or User.

    Field: Ct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Ct factor used in calculating the building period (in English units).

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.
    Page 136 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NEHRP97 response modification factor.

    Field: SeisGroup
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The NEHRP97 seismic group.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The NEHRP97 site class.

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NEHRP97 mapped spectral acceleration for short periods.

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NEHRP97 mapped spectral acceleration for a one second period.

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NEHRP97 site coefficient, Fa.
    Page 137 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NEHRP97 site coefficient, Fv.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    NEHRP97 coefficient Cs used to calculate the seismic base shear. This item is only
    available after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - NZS 1170 2004

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Page 138 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Approximate, Prog Calc (short for
    program calculated), or User.

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    Page 139 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D or E indicating the Site Sub Soil Class.

    Field: Z
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NZS 1170.5 2004 hazard factor specified in clause 3.1.4.

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NZS 1170.5 2004 return period factor specified in clause 3.1.5.

    Field: D
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Distance to fault [km] used to calculate the NZS 1170.5 2004 near fault factor specified in
    clause 3.1.6.

    Page 140 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StPerFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NZS 1170.5 2004 structure performance factor, Sp.

    Field: StDucFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NZS 1170.5 2004 structure ductility factor, u.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    NZS 1170.4 2004 coefficient Cd(T) used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - TSC 2007

    Page 141 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Approximate, Prog Calc (short for
    program calculated), or User.

    Field: Ct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Ct factor used in calculating the building period (in meters).

    Page 142 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: ZCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: ZUser
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The user specified seismic zone factor, Z.

    Page 143 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SeismicZone
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Zone 1, Zone 2, Zone 3 or Zone 4 indicating the seismic zone.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Z1, Z2, Z3 or Z4 indicating the site class.

    Field: A0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The TSC 2007 PGA.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The TSC 2007 importance factor.

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The TSC 2007 response reduction factor.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Page 144 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    TSC 2007 coefficient used to calculate the seismic base shear. This item is only available
    after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - UBC94

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Page 145 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Method A, Prog Calc (short for
    program calculated), or User.

    Field: Ct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Ct factor used in calculating the building period (in English units).

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.
    Page 146 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: Rw
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC94 numerical factor, Rw.

    Field: Z
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The UBC94 seismic zone factor.

    Field: S
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The UBC94 site coefficient for soil characteristics.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC94 importance factor.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.

    Page 147 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoeffUsed
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    UBC94 coefficient C used to calculate the seismic base shear. This item is only available
    after the analysis has been run.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.

    Field: FtUsed
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The Ft force (concentrated force at the top of the building) calculated for the specified
    auto seismic load. This item is only available after the analysis has been run.
    Table: Auto Seismic - UBC97

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Page 148 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: PeriodCalc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the method used to determine the building period for use in calculating
    the magnitude of the auto seismic load. It is either Method A, Prog Calc (short for
    program calculated), or User.

    Field: Ct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Ct factor used in calculating the building period (in English units).

    Field: UserT
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The user-defined value of the building period used in calculating the magnitude of the auto
    seismic load.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put

    Page 149 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC97 overstrength factor.

    Field: SoilType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The UBC97 soil profile type.

    Field: Z
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The UBC97 seismic zone factor.

    Field: Ca
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC97 coefficient, Ca.

    Page 150 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC97 coefficient, Cv.

    Field: SourceType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The UBC97 seismic source type.

    Field: SourceDist
    Field is Imported: Yes
    Format: Controlled by program
    Units: km
    The distance to the closest known seismic source in kilometers.

    Field: Na
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC97 near source factor, Na.

    Field: Nv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC97 near source factor, Nv.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC97 importance factor.

    Field: TUsed
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period used to calculate the seismic base shear. This item is only available after the
    analysis has been run.
    Page 151 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.

    Field: FtUsed
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The Ft force (concentrated force at the top of the building) calculated for the specified
    auto seismic load. This item is only available after the analysis has been run.
    Table: Auto Seismic - UBC97 Isolated

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Page 152 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: Ri
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC97 overstrength factor for isolated buildings specified in UBC97 Table A-16-E.

    Field: Bd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC97 coefficient for damping specified in UBC97 Table A-16-C.

    Page 153 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Kmax
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Maximum effective stiffness of the isolation system.

    Field: Kmin
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Minimum effective stiffness of the isolation system.

    Field: SoilType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The UBC97 soil profile type.

    Field: Z
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The UBC97 seismic zone factor.

    Field: Cvd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC97 coefficient, Cv.

    Field: SourceType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The UBC97 seismic source type.

    Field: SourceDist
    Field is Imported: Yes
    Format: Controlled by program
    Units: km
    The distance to the closest known seismic source in kilometers.

    Page 154 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Nv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC97 near source factor, Nv.

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - User Coefficient

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either X or Y indicating the global direction in which the specified auto
    seismic load acts.

    Field: PercentEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The percentage eccentricity applicable to all rigid diaphragms. This item only applies if
    the Dir item indicates that there is eccentricity. Note that if the EccOverride item is Yes,
    then this eccentricity may be overwritten for some diaphragms.

    Page 155 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EccOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item indicates if the percentage eccentricity specified by the PercentEcc item is
    overwritten for any of the rigid diaphragms in the model.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto seismic loads are applied. This
    item only applies when the Z values are user defined.

    Field: C
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The user-defined base shear coefficient (V = CW).

    Field: K
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The user-defined exponent applied to the story height.

    Page 156 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WeightUsed
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The seismic weight of the structure used to calculate the seismic base shear. This item is
    only available after the analysis has been run.

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic - User Loads

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto seismic load applies.

    Field: Diaphragm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the diaphragm to which the load is applied.

    Field: DiaphragmZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate of the specified diaphragm.

    Field: AppPoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either CM (short for center of mass) or User indicating the application point
    of the load.

    Page 157 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AddEcc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The additional eccentricity ratio added to the specified load. This added eccentricity
    causes an MZ moment in the plane of the diaphragm. This item is only applicable when
    the user seismic load is applied at the center of mass.

    Field: FX
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The force applied to the diaphragm in the global X direction.

    Field: FY
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The force applied to the diaphragm in the global Y direction.

    Field: MZ
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The moment applied to the diaphragm about the global Z axis.

    Field: X
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The user-defined global X coordinate of the load application point.

    Field: Y
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The user-defined global Y coordinate of the load application point.

    Page 158 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BaseShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear calculated for the specified auto seismic load. This item is only available
    after the analysis has been run.
    Table: Auto Seismic Eccentricity Overrides

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: AutoLdType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This item is either User Coeff, User Loads or the name of the code considered for the
    specified load pattern.

    Field: Diaphragm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the horizontal rigid diaphragm constraint to which the specified eccentricity
    applies.

    Field: Eccen
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    User-specified eccentricity for the specified rigid diaphragm constraint. Note that this
    eccentricity is specified as an absolute length, not a percentage of the structure dimension.
    Table: Auto Seismic Loads To Groups

    Field: LoadPat
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Page 159 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AutoLdType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This item is either User Coeff, User Loads or the name of the code considered for the
    specified load pattern.

    Field: Group
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the group to which the specified load applies.

    Field: GroupAvgZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The average global Z coordinate of all point objects included in the specified group.

    Field: FX
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto seismic force acting in the global X direction at the specified point.

    Field: FY
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto seismic force acting in the global Y direction at the specified point.

    Field: FZ
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto seismic force acting in the global Z direction at the specified point.

    Field: MX
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto seismic force acting in the global X axis at the specified point.
    Page 160 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MY
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto seismic force acting in the global Y axis at the specified point.

    Field: MZ
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto seismic force acting in the global Z axis at the specified point.

    Field: X
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the point at which the auto seismic group forces and moments
    are reported.

    Field: Y
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the point at which the auto seismic group forces and moments
    are reported.

    Field: Z
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the point at which the auto seismic group forces and moments
    are reported.
    Table: Auto Seismic Loads To Horizontal Diaphragms

    Field: LoadPat
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Page 161 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AutoLdType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This item is either User Coeff, User Loads or the name of the code considered for the
    specified load pattern.

    Field: Diaphragm
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the horizontal rigid diaphragm constraint to which the specified load applies.

    Field: DiaphragmZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate of the specified diaphragm.

    Field: FX
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto seismic force acting in the global X direction at the specified point.

    Field: FY
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto seismic force acting in the global Y direction at the specified point.

    Field: FZ
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto seismic force acting in the global Z direction at the specified point.

    Field: MX
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto seismic force acting in the global X axis at the specified point.
    Page 162 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MY
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto seismic force acting in the global Y axis at the specified point.

    Field: MZ
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto seismic force acting in the global Z axis at the specified point.

    Field: X
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the point at which the auto seismic diaphragm forces and
    moments are reported.

    Field: Y
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the point at which the auto seismic diaphragm forces and
    moments are reported.

    Field: Z
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the point at which the auto seismic diaphragm forces and
    moments are reported.
    Table: Auto Seismic Loads To Joints

    Field: LoadPat
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Page 163 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AutoLdType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This item is either User Coeff, User Loads or the name of the code considered for the
    specified load pattern.

    Field: JointElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint element in the SAP analysis model to which the specified auto
    seismic force is applied.

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint object associated with the specified joint element, if any.

    Field: FX
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto seismic force acting in the global X direction at the specified point.

    Field: FY
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto seismic force acting in the global Y direction at the specified point.

    Field: FZ
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto seismic force acting in the global Z direction at the specified point.

    Page 164 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MX
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto seismic force acting in the global X axis at the specified point.

    Field: MY
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto seismic force acting in the global Y axis at the specified point.

    Field: MZ
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto seismic force acting in the global Z axis at the specified point.

    Field: X
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the point at which the auto seismic joint element forces and
    moments are reported.

    Field: Y
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the point at which the auto seismic joint element forces and
    moments are reported.

    Field: Z
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the point at which the auto seismic joint element forces and
    moments are reported.
    Table: Auto Wave 1 - General

    Page 165 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wave load applies.

    Field: WaveChar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a set of wave characteristics data.

    Field: Current
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the label of a set of wave current profile data. None means that no
    current is considered for this auto wave load.

    Field: MarineGrow
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the label of a set of wave marine growth profile data. None means
    that no marine growth is considered for this auto wave load (unless it is specified as a
    wave overwrite).

    Field: DICoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either API Default or the label of a set of wave drag and inertia coefficient profile
    data.
    API Default means that the program uses a drag and inertia coefficients of 0.65 and 1.6,
    respectively for Rough. Smooth conditions are assumed above the specified high tide
    elevation and rough conditions are assumed below.

    Page 166 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WaveWind
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the label of a set of wave wind data. None means that no wind is
    considered for this auto wave load.

    Field: BuoyLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if buoyant loads are included as part of the wave load. Otherwise it is No.

    Field: LoadDisc
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum discretization length for distributed wave loads applied to objects. A value
    is calculated for the distributed load at locations along an object not exceeding the
    discretization length. The magnitude of the distributed wave load is assumed to vary
    linearly between these calculated locations.

    Field: InitCrestX
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of a point on the initial wave crest.

    Field: InitCrestY
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of a point on the initial wave crest.

    Field: NumPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The total number of wave crest positions considered for this auto wave load.
    If only one position is considered then it is the wave crest position defined by the
    InitCrestX and InitCrestY items.

    Page 167 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    If multiple positions are considered then the wave length is divided by the number of
    positions considered to create equal length segments along the wave length. The wave
    crest is then considered at positions located at the beginning of each of these wave
    segments. For example, if four positions are considered, then the wave crest is located at
    0, 1/4, 1/2 and 3/4 points of the wave length.

    Field: DirAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The direction that the wave is moving measured counterclockwise from the global X axis.

    Field: VertDatum
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate at which the wave vertical datum is located. The wave vertical
    datum is used as a reference elevation for all other wave vertical elevations.

    Field: MLFromDatum
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The elevation of the mudline measured from the wave vertical datum. Positive elevations
    are above the datum.

    Field: HTFromDatum
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The elevation of the high tide measured from the wave vertical datum. Positive elevations
    are above the datum.

    Field: WWtDensity
    Field is Imported: Yes
    Format: Weight/Volume (Mass and Weight section of form)
    Units: Force/Length3
    The water weight density.
    Table: Auto Wave 2 - Tabular Display

    Page 168 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wave load applies.

    Field: HLoc
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The horizontal (X) coordinate of the considered point in the wave coordinate system.

    Field: VFromDatum
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The vertical (Z) coordinate of the considered point in the wave coordinate system. This is
    the distance from the wave vertical datum to the considered point. Positive distances
    mean the considered point is above the datum.

    Field: HWaveVel
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    The horizontal velocity of the wave (not including the current) at the considered point.

    Field: HCurrVel
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    The horizontal velocity of the current, in the direction of the WAVE, at the considered
    point.

    Field: HTotalVel
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    The total horizontal velocity at the considered point. This is the sum of the wave velocity
    and the component of current velocity in the direction of the wave.

    Page 169 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HWaveAcc
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The horizontal acceleration of the wave at the considered point.

    Field: VWaveVel
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    The vertical velocity of the wave at the considered point.

    Field: VWaveAcc
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The vertical acceleration of the wave at the considered point.

    Field: Pressure
    Field is Imported: No
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    The hydrostatic pressure at the considered point.
    Table: Auto Wave 3 - Wave Characteristics - General

    Field: WaveChar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a set of wave characteristics data.

    Field: WaveType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either From Theory or User indicating the wave type considered.

    Page 170 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: KinFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The wave kinematics factor. This factor accounts for wave directional spreading and
    irregularity in the wave profile shape.

    Field: SWaterDepth
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The storm water depth. The mean storm water level (MSWL) is at a distance equal to the
    storm water depth above the mudline.

    Field: WaveHeight
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The wave height. The distance from mean storm water level (see the SWaterDepth item) to
    the top of the wave is equal to one-half the wave height.
    This item only applies when the WaveType item is From Theory.

    Field: WavePeriod
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The wave period as it appears to a stationary observer, that is, as it appears to an observer
    who is NOT moving with the current.
    This item only applies when the WaveType item is From Theory.

    Field: WaveTheory
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Linear, Stokes or Cnoidal indicating the wave theory used.
    This item only applies when the WaveType item is From Theory.

    Page 171 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TheoryOrd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    If the WaveTheory item is Stokes or Cnoidal then this is the order of the wave theory.
    This item only applies when the WaveType item is From Theory and when the
    WaveTheory item is either Stokes or Cnoidal.
    Table: Auto Wave 4 - Wave Characteristics - User Horizontal Coordinates

    Field: WaveChar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a set of wave characteristics data.

    Field: HLoc
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The horizontal (X) coordinate of the considered point in the wave coordinate system.

    Field: SFromDatum
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The elevation of the wave surface measured from the wave vertical datum. Positive
    elevations are above the datum.
    Table: Auto Wave 5 - Wave Characteristics - User Vertical Coordinates

    Field: WaveChar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a set of wave characteristics data.

    Field: VFromDatum
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The vertical (Z) coordinate of the considered point in the wave coordinate system. This is
    the distance from the wave vertical datum to the considered point. Positive distances
    mean the considered point is above the datum.
    Page 172 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Auto Wave 6 - Wave Characteristics - User Wave Data

    Field: WaveChar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a set of wave characteristics data.

    Field: HLoc
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The horizontal (X) coordinate of the considered point in the wave coordinate system.

    Field: VFromDatum
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The vertical (Z) coordinate of the considered point in the wave coordinate system. This is
    the distance from the wave vertical datum to the considered point. Positive distances
    mean the considered point is above the datum.

    Field: HWaveVel
    Field is Imported: Yes
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    The horizontal velocity of the wave (not including the current) at the considered point.

    Field: HWaveAcc
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The horizontal acceleration of the wave at the considered point.

    Field: VWaveVel
    Field is Imported: Yes
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    The vertical velocity of the wave at the considered point.

    Page 173 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VWaveAcc
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The vertical acceleration of the wave at the considered point.

    Field: Pressure
    Field is Imported: Yes
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    The hydrostatic pressure at the considered point.
    Table: Auto Wave 7 - Current Profile

    Field: Current
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a set of wave current profile data.

    Field: VFromDatum
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The vertical (Z) coordinate of the considered point in the wave coordinate system. This is
    the distance from the wave vertical datum to the considered point. Positive distances
    mean the considered point is above the datum.

    Field: HCurrVel
    Field is Imported: Yes
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    The horizontal velocity of the current, in the direction of the CURRENT, at the considered
    point.

    Field: DirAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The direction that the current is moving measured counterclockwise from the global X
    axis.

    Page 174 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BlockFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The current blockage factor.

    Field: StretchOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Linear Product of Inertia about 2-3 Nonlinear indicating the current
    stretching option used.
    Table: Auto Wave 8 - Marine Growth

    Field: MarineGrow
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a set of wave marine growth profile data.

    Field: VFromDatum
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The vertical (Z) coordinate of the considered point in the wave coordinate system. This is
    the distance from the wave vertical datum to the considered point. Positive distances
    mean the considered point is above the datum.

    Field: Thickness
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The marine growth thickness at the specified elevation.
    Table: Auto Wave 9 - Drag And Inertia Coefficients

    Field: DICoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a set of wave drag and inertia coefficient profile data.

    Page 175 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VFromDatum
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The vertical (Z) coordinate of the considered point in the wave coordinate system. This is
    the distance from the wave vertical datum to the considered point. Positive distances
    mean the considered point is above the datum.

    Field: DragCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The drag coefficient at the specified elevation.

    Field: InerCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The inertia (mass) coefficient at the specified elevation.
    Table: Auto Wave 10 - Wave Wind Loads

    Field: WaveWind
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a set of wave wind data.

    Field: DirAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The direction that the wind is moving measured counterclockwise from the global X axis.

    Field: MeanSpeed
    Field is Imported: Yes
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    The one hour mean wind speed at 32.8 ft (10 m).

    Page 176 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AvgTimePer
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The averaging time period, t, for the wind. 0 < t <= 3600 sec.

    Field: AirMassDen
    Field is Imported: Yes
    Format: Mass/Volume (Mass and Weight section of form)
    Units: Force-Sec2/Length4
    The mass density of air.

    Field: TypShapeCo
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The typical wind shape coefficient. This shape coefficient is used for all objects unless it
    is overwritten.
    Table: Auto Wind - API 4F

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Areas, Frames, or Areas And Frames. Areas means that the wind
    exposure is based on user-defined wind pressure coefficients assigned to area objects.
    Frames means that the wind load is applied to frame objects assuming that the structure is
    an open structure.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Page 177 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindVel
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The design reference wind velocity in knots, Vref.

    Field: SSLMult
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The structural safety level multiplier, alpha.

    Field: ShieldFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shielding factor.
    Table: Auto Wind - ASCE7-88

    Page 178 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Page 179 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: mph
    The basic wind speed in mph.

    Field: Exposure
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    ASCE7-88 wind exposure type.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    ASCE7-88 wind importance factor.

    Field: GustFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ASCE7-88 gust factor, G.

    Page 180 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - ASCE7-95

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Page 181 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: mph
    The basic wind speed in mph.

    Field: Exposure
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    ASCE7-95 wind exposure type.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    ASCE7-95 wind importance factor.

    Page 182 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Kzt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ASCE7-95 topographic factor.

    Field: GustFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ASCE7-95 gust factor, G.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - ASCE7-02

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms, Areas, Frames, or Areas And Frames. Diaphragms means
    that the wind exposure is based on the extent of the rigid diaphragms. Areas means that the
    wind exposure is based on user-defined wind pressure coefficients assigned to area
    objects. Frames means that the wind load is applied to frame objects assuming that the
    structure is an open structure.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Page 183 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: ASCECase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either 1, 2, 3, 4 or 5 indicating the ASCE case considered as shown in ASCE
    7-02 Figure 6-9. Case 5 means that all four cases (1-4) are created.

    Field: E1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ex ratio (eccentricity) specified in ASCE 7-02 Figure 6-9.

    Field: E2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ey ratio (eccentricity) specified in ASCE 7-02 Figure 6-9.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Page 184 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: mph
    The basic wind speed in mph.

    Field: Exposure
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    ASCE7-02 wind exposure type.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    ASCE7-02 wind importance factor.

    Field: Kzt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ASCE7-02 topographic factor.

    Page 185 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GustFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ASCE7-02 gust factor, G.

    Field: Kd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ASCE7-02 wind directionality factor.

    Field: SolidRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of solid area to gross area.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - ASCE7-05

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms, Areas, Frames, or Areas And Frames. Diaphragms means
    that the wind exposure is based on the extent of the rigid diaphragms. Areas means that the
    wind exposure is based on user-defined wind pressure coefficients assigned to area
    objects. Frames means that the wind load is applied to frame objects assuming that the
    structure is an open structure.

    Page 186 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: ASCECase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms, Areas, Frames, or Areas And Frames. Diaphragms means
    that the wind exposure is based on the extent of the rigid diaphragms. Areas means that the
    wind exposure is based on user-defined wind pressure coefficients assigned to area
    objects. Frames means that the wind load is applied to frame objects assuming that the
    structure is an open structure.

    Field: E1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ex ratio (eccentricity) specified in ASCE 7-05 Figure 6-9.

    Field: E2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ey ratio (eccentricity) specified in ASCE 7-05 Figure 6-9.

    Page 187 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: mph
    The basic wind speed in mph.

    Field: Exposure
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    ASCE7-05 wind exposure type.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    ASCE7-05 wind importance factor.

    Page 188 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Kzt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ASCE7-05 topographic factor.

    Field: GustFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ASCE7-05 gust factor, G.

    Field: Kd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ASCE7-05 wind directionality factor.

    Field: SolidRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of solid area to gross area.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - ASCE7-10

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Page 189 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms, Areas, Frames, or Areas And Frames. Diaphragms means
    that the wind exposure is based on the extent of the rigid diaphragms. Areas means that the
    wind exposure is based on user-defined wind pressure coefficients assigned to area
    objects. Frames means that the wind load is applied to frame objects assuming that the
    structure is an open structure.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: ASCECase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms, Areas, Frames, or Areas And Frames. Diaphragms means
    that the wind exposure is based on the extent of the rigid diaphragms. Areas means that the
    wind exposure is based on user-defined wind pressure coefficients assigned to area
    objects. Frames means that the wind load is applied to frame objects assuming that the
    structure is an open structure.

    Page 190 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: E1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ex ratio (eccentricity) specified in ASCE 7-05 Figure 6-9.

    Field: E2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ey ratio (eccentricity) specified in ASCE 7-05 Figure 6-9.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: mph
    The basic wind speed in mph.

    Page 191 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Exposure
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    ASCE7-10 wind exposure type.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    ASCE7-10 wind importance factor.

    Field: Kzt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ASCE7-05 topographic factor.

    Field: GustFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ASCE7-05 gust factor, G.

    Field: Kd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ASCE7-05 wind directionality factor.

    Field: SolidRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of solid area to gross area.

    Page 192 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - AS-NZS 1170 2 2002

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Page 193 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ka
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The area reduction factor, Ka.

    Field: Kc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The combination factor, Kc.

    Field: Kl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The local pressure factor, Kl.

    Field: Kp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The porous cladding factor, Kp.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Page 194 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: meter/sec
    The basic wind speed in m/s.

    Field: TerrainCat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 1, 2, 3 or 4 indicating the terrain category.

    Field: CycloneReg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This is Yes if the structure is in a cyclone region, otherwise it is No.

    Field: Md
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The directional multiplier, Md.

    Field: Ms
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shielding multiplier, Ms.

    Field: Mt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The topographical multiplier, Mt.
    Page 195 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cdyn
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The dynamic response factor, Cdyn.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - AS-NZS 1170 2 2011

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Page 196 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: Ka
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The area reduction factor, Ka.

    Field: Kc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The combination factor, Kc.

    Field: Kl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The local pressure factor, Kl.

    Field: Kp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The porous cladding factor, Kp.

    Field: ASCECase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either 1, 2, 3, or 4 indicating the AS/NZS 1170.2 case considered. Case 3
    means that all four cases (1-4) are created.

    Page 197 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: meter/sec
    The basic wind speed in m/s.

    Field: TerrainCat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 1, 2, 3 or 4 indicating the terrain category.

    Field: Md
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The directional multiplier, Md.

    Page 198 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ms
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shielding multiplier, Ms.

    Field: Mt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The topographical multiplier, Mt.

    Field: Cdyn
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The dynamic response factor, Cdyn.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - BOCA96

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Page 199 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Page 200 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: mph
    The basic wind speed in mph.

    Field: Exposure
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    BOCA96 wind exposure type.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    BOCA96 wind importance factor.

    Field: GhType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User Defined or Per Code indicating how the gust response factor is
    defined.

    Field: Gh
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The BOCA96 gust response factor.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - BS6399-95

    Page 201 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Page 202 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: Ve
    Field is Imported: Yes
    Format: Controlled by program
    Units: meter/sec
    The effective wind speed in meters per second.

    Field: Ca
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The BS6399-95 size effect factor.

    Field: Cr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The BS6399-95 dynamic augmentation factor.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - Chinese 2010

    Page 203 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: BldgWidth
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The building width.

    Field: ShapeCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shape coefficient.

    Field: UnifTaper
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a correction is to be applied for a uniform taper of the building;
    otherwise it is No.

    Page 204 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TaperRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The taper ratio, Bh/B0. This item only applies when the UnifTaper item is Yes.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: kpa
    The basic wind speed in mph.

    Field: GrndRough
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C or D indicating the ground roughness type.

    Page 205 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiZSource
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'Modal Analysis' or 'Z/H Ratio' indicating how PhiZ is determined.

    Field: T1Source
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'Modal Analysis' or 'User' indicating how T1 is determined.

    Field: UserT1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The user specified T1 value. This item only applies when the T1Source item is User.

    Field: DampRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - Eurocode1 2005

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Page 206 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.
    Page 207 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: meter/sec
    The basic wind speed, vb, in meters per second.

    Field: TerrainCat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 0, I, II, III or IV indicating the Terrain Category.

    Field: OroFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The orography factor, Co(z).

    Field: TurbFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The turbulence factor, k1.

    Field: StructFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The structural factor, CsCd.

    Field: AirDensity
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The air density in kg/m3, Rho.
    Page 208 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - IS875-1987

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Page 209 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: meter/sec
    The basic wind speed in meters per second.

    Field: TerrainCat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 1, 2, 3 or 4 indicating the Terrain Category.

    Field: StructClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B or C indicating the Structure Class.

    Page 210 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: k1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The risk coefficient factor, k1.

    Field: k3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The air density in kg/m3, Rho.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - ITALIAN NTC 2008

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Page 211 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: meter/sec
    The basic wind speed, vb, in meters per second.

    Page 212 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ExposureCat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either I, II, III , IV or V indicating the Exposure Category.

    Field: TopoFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Topography factor, ct.

    Field: DynCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Dynamic Coefficient, cd.

    Field: ShapeFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shape factor, cp.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - Mexican

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Page 213 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.
    Page 214 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindVel
    Field is Imported: Yes
    Format: Controlled by program
    Units: meter/sec
    The wind velocity, Vd in meters per second.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - NBCC 2010

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Page 215 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: VelPressure
    Field is Imported: Yes
    Format: Controlled by program
    Units: kpa
    The velocity pressure in kPa.

    Page 216 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The gust effect factor.

    Field: Iw
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The importance factor.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - NBCC 2005

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Page 217 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: VelPressure
    Field is Imported: Yes
    Format: Controlled by program
    Units: kpa
    The velocity pressure in kPa.

    Page 218 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The gust effect factor.

    Field: Iw
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The importance factor.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - NBCC95

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Page 219 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: VelPressure
    Field is Imported: Yes
    Format: Controlled by program
    Units: kpa
    The NBCC95 velocity pressure in kPa.

    Page 220 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NBCC95 gust effect factor.

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - TS 498-97

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Page 221 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LeewardCp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: meter/sec
    The basic wind speed in meters per second.

    Field: CoeffDyn
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Coefficient Dynamic, Cr.

    Page 222 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - UBC94

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Page 223 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: mph
    The basic wind speed in mph.

    Field: Exposure
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    UBC94 wind exposure type.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    UBC94 wind importance factor.

    Page 224 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - UBC97

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: ExposeFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Diaphragms or Areaobjects. Diaphragms means that the wind exposure
    is based on the extent of the rigid diaphragms. Areaobjects means that the wind exposure
    is based on user-defined wind pressure coefficients assigned to area objects.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    .

    Field: WindwardCq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The windward wind pressure coefficient. This item only applies if the ExposeFrom item
    is Diaphragms.

    Field: LeewardCq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The leeward wind pressure coefficient. This item only applies if the ExposeFrom item is
    Diaphragms.

    Page 225 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the TopZ and BotZ items are specified by the user. It is No if these
    items are automatically calculated by the program. The program calculated values put
    TopZ at the maximum global Z-coordinate found for all point objects in the structure and
    BotZ at the minimum global Z-coordinate.

    Field: MaxZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the highest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: MinZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate at the lowest level where auto wind loads are applied. This item
    only applies when the Z values are user defined.

    Field: WindSpeed
    Field is Imported: Yes
    Format: Controlled by program
    Units: mph
    The basic wind speed in mph.

    Field: Exposure
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    UBC97 wind exposure type.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    UBC97 wind importance factor.

    Page 226 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ExpWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either User or From Diaphs indicating how the program determines the
    exposure width for the wind. From Diaphs means that the program calculates the exposure
    width based on the extent of the diaphragm in a direction perpendicular to the wind load.
    Table: Auto Wind - User

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: Diaphragm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Rigid diaphragm constraint for which the specified exposure width applies.

    Field: DiaphragmZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate of the specified diaphragm.

    Field: FX
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The force applied to the diaphragm in the global X direction.

    Field: FY
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The force applied to the diaphragm in the global Y direction.

    Page 227 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MZ
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The moment applied to the diaphragm about the global Z axis.

    Field: X
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The user-defined global X coordinate of the load application point.

    Field: Y
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The user-defined global Y coordinate of the load application point.
    Table: Auto Wind Exposure For Horizontal Diaphragms

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: Diaphragm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Rigid diaphragm constraint for which the specified exposure width applies.

    Field: DiaphragmZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate of the specified diaphragm.

    Field: X
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X-coordinate of the point where the wind force is applied.
    Page 228 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Y
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y-coordinate of the point where the wind force is applied.

    Field: TribWidth
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The exposure width for the specified diaphragm.

    Field: TribHeight
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The tributary height of wind load applied to the specified diaphragm.
    Table: Auto Wind Loads To Groups

    Field: LoadPat
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: AutoLdType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This item is either User or the name of the code considered for the specified load pattern.

    Field: Group
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of the group to which the auto wind load applies.

    Field: GroupAvgZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The average global Z coordinate of all point objects included in the specified group.
    Page 229 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FX
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto wind force acting in the global X direction at the specified point.

    Field: FY
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto wind force acting in the global Y direction at the specified point.

    Field: FZ
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto wind force acting in the global Z direction at the specified point.

    Field: MX
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto wind force acting in the global X axis at the specified point.

    Field: MY
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto wind force acting in the global Y axis at the specified point.

    Field: MZ
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto wind force acting in the global Z axis at the specified point.

    Field: X
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the point at which the auto wind group forces and moments are
    reported.
    Page 230 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Y
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the point at which the auto wind group forces and moments are
    reported.

    Field: Z
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the point at which the auto wind group forces and moments are
    reported.
    Table: Auto Wind Loads To Horizontal Diaphragms

    Field: LoadPat
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified auto wind load applies.

    Field: AutoLdType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This item is either User or the name of the code considered for the specified load pattern.

    Field: Diaphragm
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Horizontal rigid diaphragm constraint to which the specified wind load applies.

    Field: DiaphragmZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate of the specified diaphragm.

    Page 231 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FX
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto wind force acting in the global X direction at the specified point.

    Field: FY
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto wind force acting in the global Y direction at the specified point.

    Field: FZ
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto wind force acting in the global Z direction at the specified point.

    Field: MX
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto wind force acting in the global X axis at the specified point.

    Field: MY
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto wind force acting in the global Y axis at the specified point.

    Field: MZ
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto wind force acting in the global Z axis at the specified point.

    Field: X
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the point at which the auto wind diaphragm forces and
    moments are reported.
    Page 232 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Y
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the point at which the auto wind diaphragm forces and
    moments are reported.

    Field: Z
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the point at which the auto wind diaphragm forces and
    moments are reported.
    Table: Auto Wind Loads To Joints

    Field: LoadPat
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: AutoLdType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This item is either User or the name of the code considered for the specified load pattern.

    Field: JointElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint element in the SAP analysis model to which the specified auto wind
    force is applied.

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint object associated with the specified joint element, if any.

    Page 233 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FX
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto wind force acting in the global X direction at the specified point.

    Field: FY
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto wind force acting in the global Y direction at the specified point.

    Field: FZ
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The applied auto wind force acting in the global Z direction at the specified point.

    Field: MX
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto wind force acting in the global X axis at the specified point.

    Field: MY
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto wind force acting in the global Y axis at the specified point.

    Field: MZ
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The applied auto wind force acting in the global Z axis at the specified point.

    Field: X
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the point at which the auto wind joint element forces and
    moments are reported.
    Page 234 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Y
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the point at which the auto wind joint element forces and
    moments are reported.

    Field: Z
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the point at which the auto wind joint element forces and
    moments are reported.
    Table: Bridge Design Preferences - JTG-D62-2004

    Field: Importance
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The importance class for the JTG-D62-2004 bridge design code.

    Field: FactLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The importance factor for the JTG-D62-2004 bridge design code.
    Table: Bridge Design Preferences - EUROCODE

    Field: AlphaCC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient taking account of long term effects on the compressive strength and of
    unfavourable effects resulting from the way the load is applied.

    Field: AlphaCT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient taking account of long term effects on the tension strength and of unfavourable
    effects resulting from the way the load is applied.

    Page 235 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Crdc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: k1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Design Preferences - IRC-2011

    Field: AlphaCC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient taking account of long term effects on the compressive strength and of
    unfavourable effects resulting from the way the load is applied.

    Field: AlphaCT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient taking account of long term effects on the tension strength and of unfavourable
    effects resulting from the way the load is applied.

    Field: Crdc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: k1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Seismic Design Preferences - AASHTO Seismic 2011

    Page 236 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HingeOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify whether the concrete column hinges are generated by program (Auto - ) or
    assigned by users. The program will generate hinges at both top and bottom of each bent
    column if Auto hinge is selected and the seismic design category is D.

    Field: HingeStlOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify whether the steel column hinges are generated by program (Auto - ) or assigned
    by users. The program will generate hinges at both top and bottom of each bent column if
    Auto hinge is selected and the seismic design category is D.

    Field: HingeLenOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify which hinge length to use when the code-specified hinge length is different for
    loading in the longitudinal and transverse directions of the bent. This option affects all
    seismic design requests. Here the longitudinal and transverse directions are measured
    normal and parallel to the bent cap, respectively, in the case of a skew bent.
    Table: Bridge Seismic Design Preferences - JTG/T B02-01 2008

    Field: HingeOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: HingeLenOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .
    Table: Bridge DesReqSeismic 01 - General

    Page 237 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The type of the seismic design.

    Field: LoadDef
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The loading definition for the fault action. It can be Planar or General.

    Field: Run
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The flag to indicate if the design request is selected for designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Design status.

    Field: SDCOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of an existing response-spectrum function that defines the vertical seismic
    demand for.
    Page 238 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Edit Reference Planes.

    Field: DisplDF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Scale factor to multiply the bent displacement demands obtained from the responsespectrum analysis. This factor can be used to modify the displacement demand due to
    damping other than 5%, or to magnify the demand for short-period structures. This factor
    will be applied to all bents in both the longitudinal and transverse directions.

    Field: Station
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The station where the fault intersects the bridge layout line. This field is only needed when
    the LoadDef is Planar.

    Field: FaultOrient
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The orientation of the fault. This field is only needed when the LoadDef is Planar.
    Table: Bridge DesReqSeismic 01a - Loading - Uniform

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: RSFunc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of an existing response-spectrum function that defines the horizontal seismic
    demand for.

    Page 239 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RSFuncVert
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of an existing response-spectrum function that defines the vertical seismic
    demand for.
    Table: Bridge DesReqSeismic 01b - Loading - Fault Crossing - Planar

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: Direction
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The direction of the ground motion with respect to the fault orientation. This field is only
    needed when the LoadDef is Planar.

    Field: Displ
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The magnitude of the displacement measured from the undeformed position. This field is
    only needed when the LoadDef is Planar.

    Field: RSFunc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of an existing response-spectrum function that defines the horizontal seismic
    demand for.
    Table: Bridge DesReqSeismic 01c - Loading - Fault Crossing - General

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 240 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: LoadSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor for the corresponding load pattern.

    Field: RefDispl
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The reference displacement for the user-assigned displacement load pattern.

    Field: RSFunc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of an existing response-spectrum function that defines the horizontal seismic
    demand for.
    Table: Bridge DesReqSeismic 02 - Gravity Load Case

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GravOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specifies whether the gravity load case is to be determined by program or specified by the
    user. The gravity load case will be used to set the initial conditions for demand and
    capacity analyses. If program determined, a nonlinear gravity load case is automatically
    created using either the entire structure or the bridge object of this design request plus an
    optional additional group. The user may specify whether or not to automatically calculate
    bent-column cracked properties as part of this analysis, and whether or not to include Pdelta effects. Loading will automatically include all load patterns of design type DEAD
    Page 241 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    and SUPERDEAD. If user-defined, an existing linear or nonlinear static or dynamic load


    case must be selected. Cracked section properties will not be automatically calculated in
    this case.

    Field: GravCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of an existing gravity load case to be used as initial conditions for demand and
    capacity analyses. This case may be linear or nonlinear, static or dynamic, and may
    include staged construction. The user must select the loading to be included, and cracked
    properties (if desired) must be accounted for by the user.

    Field: AddGroup
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    An optional additional group that will be included in the gravity load case. This item is
    only required when the gravity load case is program determined and based on the bridge
    object of this design request. It may include pile foundations and other auxilliary
    structures.

    Field: PDelta
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Specifies whether or not to consider P-Delta effects in the program-determined gravity
    load case.

    Field: CrackProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specifies whether the bent-column cracked properties are to be determined by program or
    specified by the user. If program determined, the automatic gravity load case will be run
    iteratively. Section Designer will use the calculated axial force at the top and bottom on
    the column to determine the cracked moments of inertia in the positive and negative
    transverse and longitudinal directions. The cracked properties will be applied as named
    property modifier sets and the analysis re-run to make sure the cracked properties are
    converged to within the specified tolerance.

    Page 242 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TolConv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The relative convergence tolerance for the bent-column cracked-property iteration. This
    item is required only when the cracked-property calculation is program determined.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of iterations allowed for the bent-column cracked-property
    iteration. The first run is considered to be the zero-th iteration. Usually only one iteration
    is needed. This item is required only when the cracked-property calculation is program
    determined.

    Field: Continue
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Specifies whether or not the seismic design should continue if the bent-column crackedproperty iteration fails to converge. This item is required only when the cracked-property
    calculation is program determined.
    Table: Bridge DesReqSeismic 03 - Modal And RS Load Cases

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: ModalOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specifies whether the modal load case is to be determined by program or specified by the
    user. The modal load case is used as the basis of the response-spectrum load case that
    represents the seismic design. If program determined, this modal load case will use the
    stiffness at the end of the gravity load case if nonlinear, else it will use the stiffness at zero
    initial conditions. If user-defined, the user can control the initial stiffness, eigen vs. Ritz,
    and other modal parameters. This item is required only if the seismic design category is B,
    C or D.

    Page 243 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ModalCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of an existing modal load case to be used as the basis of the response-spectrum
    load case. This item is required only if the modal load case option is user-defined.

    Field: ModeType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Eigen or Ritz indicating the type of modes requested.

    Field: AddModes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The number of additional modes to consider beyond those automatically determined. This
    can be zero (default), positive, or negative. The default number of modes is determined
    based on the number of bridge spans. The minimum number of modes is 12. For a bridge
    object with more than two spans, 6 modes are added for each additional span. If the Check
    Type is Caltrans Fault Crossing, the default number of modes will be increased as
    necessary so that it is an integral multiple of the number of applied displacement
    components or load patterns. If the number of additional modes is specified to be a
    negative number, the number of modes used will be less than the number automatically
    determined, but never less than 1.

    Field: SpecOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specifies whether the response-spectrum load case is to be determined by program or
    specified by the user. The response-spectrum load case represents the seismic demand. If
    program determined, this load case will use the given response-spectrum function and
    modal load case. Acceleration load will be applied in the longitudinal and transverse
    directions of the bridge object, and combined using the 100% + 30% rule. If user-defined,
    the user can control the loading or select the SRSS method of directional combination,
    which is invariant to direction. This item is required only if the seismic design category is
    B, C or D.

    Page 244 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SpecCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of an existing response-spectrum load case that represents the seismic demand.
    This item is required only if the response-spectrum load case option is user-defined.

    Field: SpecAngOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specifies whether the angle of loading in the response-spectrum load case is to be
    determined by program or specified by the user. If program determined, the longitudinal
    (U1) loading direction is chosen to be from the start abutment to the end abutment, both
    points located on the reference line of the bridge object. This item is required only if the
    response-spectrum load case option is user-defined.

    Field: SpecAng
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle (degree, from global X) of response spectrum load case. This item is required only
    if the angle of response spectrum load case is User-defined.

    Field: DirType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The type of directional combination for the response spectrum analysis.

    Field: DirSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The directional scale factor. For absolute directional combination, this is the scale factor
    used for the secondary directions when taking the absolute sum. This is typically 0.3.
    For CQC3 directional combination, this is the scale factor applied to the response
    spectrum function in the second horizontal direction. This is typically greater than 0.5.
    Table: Bridge DesReqSeismic 04 - Pushover Load Case

    Page 245 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: FndGroup
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Additional foundation group that will be considered in the pushover load case. This item is
    required only if the seismic design category is D.

    Field: TargetDisp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The target displacement is defined as the target ratio of Capacity/Demand for the pushover
    analyses. This item is required only if the seismic design category is D.

    Field: BentFail
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The criteria to determine the bent failure. <Pushover Curve Drop> means it is determined
    as the displacement at which the base shear first drops from its absolute maximum in the
    pushover curve to a value 1% less than that maximum. The full pushover displacement is
    used if the base shear does not decrease 1% from the maximum.This item is required only
    if the seismic design category is D.

    Field: DropTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Relative decrease in base shear from the maximum that determined the displacement
    capacity from the pushover curve.
    Table: Bridge DesReqSuper 01 - General

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.
    Page 246 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CheckType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The check type of a bridge design request.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Run
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The flag to indicate if the design request is selected for designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Design status.
    Table: Bridge DesReqSuper 02 - Station Ranges

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: Location
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Location before or after this station.

    Field: StartType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    StartType can be the beginning of the selected bridge object or user-defined station.
    Page 247 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StartSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This field is needed only when the StartType is User Defined.

    Field: EndType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    EndType can be the end of the selected bridge object or user-defined station.

    Field: EndSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This field is needed only when the EndType is User Defined.
    Table: Bridge DesReqSuper 03 - Demand Sets

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: DmndSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The demand set name of a bridge design request.

    Field: Combo
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load combination name of a demand set.

    Page 248 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the staged construction load case. This field is only for staged constructbility
    design check.

    Field: Label
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    If all stages in a case have flag "Provide Output" = No, then only keyword "Last" will be
    available.

    Field: SlabStatus
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The slab status, either Non-Composite or Composite. This field is only for non-staged
    constructbility design check.
    Table: Bridge DesReqSuper 05 - Param - AASHTOSTD02 - CBoxStress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies both compression and tension stress limits.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.

    Page 249 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on sqrt(f'c) to calcuate the tension stress limit, given in the units specified.

    Field: FTLUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The tension limit factor may be specified using either MPa or ksi units for f'c and the
    resulting tension limit.
    Table: Bridge DesReqSuper 06 - Demand - AASHTOSTD02 - CBoxStress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: DmndSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The demand set name of a bridge design request.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The tension limit factor may be specified using either MPa or ksi units for f'c and the
    resulting tension limit.
    Table: Bridge DesReqSuper 04 - LLDF - AASHTOLRFD07

    Page 250 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: LLDistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Live load distribution type.

    Field: ExtFactV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Exterior girder shear factor.

    Field: IntFactV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Interior girder shear factor.

    Field: ExtFactM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Exterior girder moment factor.

    Field: IntFactM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Interior girder moment factor.

    Field: AxleWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Wheel spacing, default = 6 ft.

    Page 251 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CurbDist
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Curb to wheel Distance, default = 2 ft.

    Field: LaneWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Lane width, default = 12 ft.

    Field: Diaph
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Are diaphragms present?.

    Field: FactLane1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    One-lane multiple-presence factor.

    Field: FactLane2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Two-lane multiple-presence factor.

    Field: FactLane3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Three-lane multiple-presence factor.

    Field: FactLaneN
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Four-lane multiple-presence factor.
    Table: Bridge DesReqSuper 05 - Param - AASHTOLRFD07 - CBoxStress
    Page 252 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies both compression and tension stress limits.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on sqrt(f'c) to calcuate the tension stress limit, given in the units specified.

    Field: FTLUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The tension limit factor may be specified using either MPa or ksi units for f'c and the
    resulting tension limit.
    Table: Bridge DesReqSuper 06 - Param - AASHTOLRFD07 - CBoxShear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 253 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiCNormalW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    normal-weight concrete.

    Field: PhiCLightW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    light-weight concrete.

    Field: Resal
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specifies whether the component of inclined flexural compression or tension, in the
    direction of the applied shear, in variable depth members shall or shall not be considered
    when determining the design factored shear force per Article 5.8.6.2.

    Field: PPMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify approach to proportioning of transverse reinforcement per AASHTO LRFD
    Section C5.8.3.2. There are two options: proportioning per Figure C5.8.3.2-1 (Default)
    and proportioning per Figure C5.8.3.2-2.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material label that will be used to determine the area of shear
    rebar required.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Page 254 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Bridge DesReqSuper 07 - Param - AASHTOLRFD07 - CBoxFlexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal flexural resistance to obtain factored resistance.
    Table: Bridge DesReqSuper 08 - Param - AASHTOLRFD07 - CBoxPrinc

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies both compression and tension stress limits.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on sqrt(f'c) to calcuate the tension stress limit, given in the units specified.

    Page 255 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FTLUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The tension limit factor may be specified using either MPa or ksi units for f'c and the
    resulting tension limit.
    Table: Bridge DesReqSuper 09 - Param - AASHTOLRFD07 - CBox2Stress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies both compression and tension stress limits.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on sqrt(f'c) to calcuate the tension stress limit, given in the units specified.

    Field: FTLUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The tension limit factor may be specified using either MPa or ksi units for f'c and the
    resulting tension limit.
    Table: Bridge DesReqSuper 10 - Param - AASHTOLRFD07 - CBox2Shear

    Page 256 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiCNW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    normal-weight concrete.

    Field: PhiCLW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    light-weight concrete.

    Field: NegSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Negative limit on strain in nonprestressed longitudinal tension reinforcement. (eq.
    5.8.3.4.2-4).

    Field: PosSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Positive limit on strain in nonprestressed longitudinal tension reinforcement.(eq. 5.8.3.4.24).

    Field: PhiCNu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_c Factor for applied factored axial force Nu (eq. 5.8.3.5-1).

    Page 257 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiCMu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_f Factor for factored moment at section Mu. (eq. 5.8.3.5-1).

    Field: SCType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Subcheck Type.

    Field: SX
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximumum distance between layers of longitudinal crack control reinforcement per
    AASHTO LRFD 5.8.3.4.2-5.

    Field: AggSize
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximum aggregate size, Eq 5.8.3.4.2. This parameter is used only when min transverse
    reinforcement is not provided.

    Field: PPMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify approach to proportioning of transverse reinforcement per AASHTO LRFD
    Section C5.8.3.2. There are two options: proportioning per Figure C5.8.3.2-1 (Default)
    and proportioning per Figure C5.8.3.2-2.

    Field: SignMuMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify option of how to determine sign of MuMin=(Vu-Vp)*dv when demand Mu<(VuVp)*dv (Eq. 5.8.3.4.2-4). There are four options: 1:Automatic by CSiBridge; 2:Sign of
    MuMin equal to Mu; 3:Add two MuMin - one positive, one negative; and 4:do not
    generate MuMin, use Mu.

    Page 258 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 11 - Param - AASHTOLRFD07 - CBox2Flexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal flexural resistance to obtain factored resistance.
    Table: Bridge DesReqSuper 12 - Param - AASHTOLRFD07 - PCCompStress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies both compression and tension stress limits.

    Page 259 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on sqrt(f'c) to calcuate the tension stress limit, given in the units specified.

    Field: FTLUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The tension limit factor may be specified using either MPa or ksi units for f'c and the
    resulting tension limit.
    Table: Bridge DesReqSuper 13 - Param - AASHTOLRFD07 - PCCompShear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiCNW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    normal-weight concrete.

    Field: PhiCLW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    light-weight concrete.

    Page 260 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NegSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Negative limit on strain in nonprestressed longitudinal tension reinforcement. (eq.
    5.8.3.4.2-4).

    Field: PosSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Positive limit on strain in nonprestressed longitudinal tension reinforcement.(eq. 5.8.3.4.24).

    Field: PhiCNu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_c Factor for applied factored axial force Nu (eq. 5.8.3.5-1).

    Field: PhiCMu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_f Factor for factored moment at section Mu. (eq. 5.8.3.5-1).

    Field: SCType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Subcheck Type.

    Field: SX
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximumum distance between layers of longitudinal crack control reinforcement per
    AASHTO LRFD 5.8.3.4.2-5.

    Page 261 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AggSize
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximum aggregate size, Eq 5.8.3.4.2. This parameter is used only when min transverse
    reinforcement is not provided.

    Field: PPMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify approach to proportioning of transverse reinforcement per AASHTO LRFD
    Section C5.8.3.2. There are two options: proportioning per Figure C5.8.3.2-1 (Default)
    and proportioning per Figure C5.8.3.2-2.

    Field: SignMuMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify option of how to determine sign of MuMin=(Vu-Vp)*dv when demand Mu<(VuVp)*dv (Eq. 5.8.3.4.2-4). There are four options: 1:Automatic by CSiBridge; 2:Sign of
    MuMin equal to Mu; 3:Add two MuMin - one positive, one negative; and 4:do not
    generate MuMin, use Mu.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 14 - Param - AASHTOLRFD07 - PCCompFlexure

    Page 262 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal flexural resistance to obtain factored resistance.
    Table: Bridge DesReqSuper 15 - Param - AASHTOLRFD07 - SteelICompStrgth

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Stage Analysis load case to determine stresses on composite section?.
    Page 263 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplies short term modular ratio (Es/Ec) to obtain long-term modular ratio.

    Field: AppendixA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Appendix A to determine resistance in negative moment regions?.

    Field: DetMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method for determining if Bridge is curved. For "Program Determined", the bridge
    layoutline will be used to determine if it is a straight or curved bridge.

    Field: IsCurved
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This field is only activated when the "Method for determining if Bridge is curved" is Userdefined.
    Table: Bridge DesReqSuper 16 - Param - AASHTOLRFD07 - SteelICompService

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Page 264 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .

    Field: ShoredCnstr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Shored Construction?.

    Field: SlabResistT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Whether or not concrete slab resists tension.

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge DesReqSuper 17 - Param - AASHTOLRFD07 - SteelICompCtrStg

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.
    Page 265 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiConTens
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Phi factor for concrete in tension.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: FactRupt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete modulus of rupture factor per Section 5.4.2.6, factor that multiplies sqrt of f'c to
    obtain modulus of rupture, default value 0.24 (ksi) or 0.63 (MPa), must be > 0.

    Field: FRUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modulus of rupture factor may be specified using either MPa or Ksi units.
    Table: Bridge DesReqSuper 18 - Param - AASHTOLRFD07 - SteelICompCtrNStg

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Page 266 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.

    Field: PhiConTens
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Phi factor for concrete in tension.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: FactRupt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete modulus of rupture factor per Section 5.4.2.6, factor that multiplies sqrt of f'c to
    obtain modulus of rupture, default value 0.24 (ksi) or 0.63 (MPa), must be > 0.

    Field: FRUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modulus of rupture factor may be specified using either MPa or Ksi units.
    Table: Bridge DesReqSuper 04 - LLDF - AASHTOLRFD12

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 267 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Live load distribution type.

    Field: ExtFactV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Exterior girder shear factor.

    Field: IntFactV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Interior girder shear factor.

    Field: ExtFactM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Exterior girder moment factor.

    Field: IntFactM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Interior girder moment factor.

    Field: AxleWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Wheel spacing, default = 6 ft.

    Field: CurbDist
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Curb to wheel Distance, default = 2 ft.

    Page 268 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LaneWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Lane width, default = 12 ft.

    Field: Diaph
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Are diaphragms present?.

    Field: FactLane1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    One-lane multiple-presence factor.

    Field: FactLane2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Two-lane multiple-presence factor.

    Field: FactLane3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Three-lane multiple-presence factor.

    Field: FactLaneN
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Four-lane multiple-presence factor.
    Table: Bridge DesReqSuper 05 - Param - AASHTOLRFD12 - CBoxStress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.
    Page 269 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies both compression and tension stress limits.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on sqrt(f'c) to calcuate the tension stress limit, given in the units specified.

    Field: FTLUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The tension limit factor may be specified using either MPa or ksi units for f'c and the
    resulting tension limit.
    Table: Bridge DesReqSuper 06 - Param - AASHTOLRFD12 - CBoxShear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiCNormalW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    normal-weight concrete.

    Page 270 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiCLightW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    light-weight concrete.

    Field: Resal
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specifies whether the component of inclined flexural compression or tension, in the
    direction of the applied shear, in variable depth members shall or shall not be considered
    when determining the design factored shear force per Article 5.8.6.2.

    Field: PPMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify approach to proportioning of transverse reinforcement per AASHTO LRFD
    Section C5.8.3.2. There are two options: proportioning per Figure C5.8.3.2-1 (Default)
    and proportioning per Figure C5.8.3.2-2.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material label that will be used to determine the area of shear
    rebar required.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 07 - Param - AASHTOLRFD12 - CBoxFlexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.
    Page 271 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal flexural resistance to obtain factored resistance.
    Table: Bridge DesReqSuper 08 - Param - AASHTOLRFD12 - CBoxPrinc

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies both compression and tension stress limits.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on sqrt(f'c) to calcuate the tension stress limit, given in the units specified.

    Field: FTLUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The tension limit factor may be specified using either MPa or ksi units for f'c and the
    resulting tension limit.
    Table: Bridge DesReqSuper 09 - Param - AASHTOLRFD12 - CBox2Stress

    Page 272 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies both compression and tension stress limits.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on sqrt(f'c) to calcuate the tension stress limit, given in the units specified.

    Field: FTLUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The tension limit factor may be specified using either MPa or ksi units for f'c and the
    resulting tension limit.
    Table: Bridge DesReqSuper 10 - Param - AASHTOLRFD12 - CBox2Shear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 273 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiCNW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    normal-weight concrete.

    Field: PhiCLW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    light-weight concrete.

    Field: NegSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Negative limit on strain in nonprestressed longitudinal tension reinforcement. (eq.
    5.8.3.4.2-4).

    Field: PosSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Positive limit on strain in nonprestressed longitudinal tension reinforcement.(eq. 5.8.3.4.24).

    Field: PhiCNu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_c Factor for applied factored axial force Nu (eq. 5.8.3.5-1).

    Field: PhiCMu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_f Factor for factored moment at section Mu. (eq. 5.8.3.5-1).

    Page 274 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SCType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Subcheck Type.

    Field: SX
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximumum distance between layers of longitudinal crack control reinforcement per
    AASHTO LRFD 5.8.3.4.2-5.

    Field: AggSize
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximum aggregate size, Eq 5.8.3.4.2. This parameter is used only when min transverse
    reinforcement is not provided.

    Field: PPMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify approach to proportioning of transverse reinforcement per AASHTO LRFD
    Section C5.8.3.2. There are two options: proportioning per Figure C5.8.3.2-1 (Default)
    and proportioning per Figure C5.8.3.2-2.

    Field: SignMuMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify option of how to determine sign of MuMin=(Vu-Vp)*dv when demand Mu<(VuVp)*dv (Eq. 5.8.3.4.2-4). There are four options: 1:Automatic by CSiBridge; 2:Sign of
    MuMin equal to Mu; 3:Add two MuMin - one positive, one negative; and 4:do not
    generate MuMin, use Mu.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.
    Page 275 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 11 - Param - AASHTOLRFD12 - CBox2Flexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal flexural resistance to obtain factored resistance.
    Table: Bridge DesReqSuper 12 - Param - AASHTOLRFD12 - PCCompStress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies both compression and tension stress limits.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.

    Page 276 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on sqrt(f'c) to calcuate the tension stress limit, given in the units specified.

    Field: FTLUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The tension limit factor may be specified using either MPa or ksi units for f'c and the
    resulting tension limit.
    Table: Bridge DesReqSuper 13 - Param - AASHTOLRFD12 - PCCompShear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiCNW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    normal-weight concrete.

    Field: PhiCLW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    light-weight concrete.

    Field: NegSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Negative limit on strain in nonprestressed longitudinal tension reinforcement. (eq.
    5.8.3.4.2-4).

    Page 277 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PosSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Positive limit on strain in nonprestressed longitudinal tension reinforcement.(eq. 5.8.3.4.24).

    Field: PhiCNu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_c Factor for applied factored axial force Nu (eq. 5.8.3.5-1).

    Field: PhiCMu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_f Factor for factored moment at section Mu. (eq. 5.8.3.5-1).

    Field: SCType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Subcheck Type.

    Field: SX
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximumum distance between layers of longitudinal crack control reinforcement per
    AASHTO LRFD 5.8.3.4.2-5.

    Field: AggSize
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximum aggregate size, Eq 5.8.3.4.2. This parameter is used only when min transverse
    reinforcement is not provided.

    Page 278 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PPMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify approach to proportioning of transverse reinforcement per AASHTO LRFD
    Section C5.8.3.2. There are two options: proportioning per Figure C5.8.3.2-1 (Default)
    and proportioning per Figure C5.8.3.2-2.

    Field: SignMuMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify option of how to determine sign of MuMin=(Vu-Vp)*dv when demand Mu<(VuVp)*dv (Eq. 5.8.3.4.2-4). There are four options: 1:Automatic by CSiBridge; 2:Sign of
    MuMin equal to Mu; 3:Add two MuMin - one positive, one negative; and 4:do not
    generate MuMin, use Mu.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 14 - Param - AASHTOLRFD12 - PCCompFlexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal flexural resistance to obtain factored resistance.
    Page 279 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Bridge DesReqSuper 15 - Param - AASHTOLRFD12 - SteelICompStrgth

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Stage Analysis load case to determine stresses on composite section?.

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplies short term modular ratio (Es/Ec) to obtain long-term modular ratio.

    Page 280 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AppendixA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Appendix A to determine resistance in negative moment regions?.

    Field: DetMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method for determining if Bridge is curved. For "Program Determined", the bridge
    layoutline will be used to determine if it is a straight or curved bridge.

    Field: IsCurved
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This field is only activated when the "Method for determining if Bridge is curved" is Userdefined.
    Table: Bridge DesReqSuper 16 - Param - AASHTOLRFD12 - SteelICompService

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .

    Page 281 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ShoredCnstr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Shored Construction?.

    Field: SlabResistT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Whether or not concrete slab resists tension.

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge DesReqSuper 17 - Param - AASHTOLRFD12 - SteelICompCtrStg

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.

    Field: PhiConTens
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Phi factor for concrete in tension.
    Page 282 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: FactRupt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete modulus of rupture factor per Section 5.4.2.6, factor that multiplies sqrt of f'c to
    obtain modulus of rupture, default value 0.24 (ksi) or 0.63 (MPa), must be > 0.

    Field: FRUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modulus of rupture factor may be specified using either MPa or Ksi units.
    Table: Bridge DesReqSuper 18 - Param - AASHTOLRFD12 - SteelICompCtrNStg

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.

    Page 283 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiConTens
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Phi factor for concrete in tension.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: FactRupt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete modulus of rupture factor per Section 5.4.2.6, factor that multiplies sqrt of f'c to
    obtain modulus of rupture, default value 0.24 (ksi) or 0.63 (MPa), must be > 0.

    Field: FRUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modulus of rupture factor may be specified using either MPa or Ksi units.
    Table: Bridge DesReqSuper 19 - Param - AASHTOLRFD12 - SteelUCompStrgth

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Page 284 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Stage Analysis load case to determine stresses on composite section?.

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplies short term modular ratio (Es/Ec) to obtain long-term modular ratio.

    Field: DetMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method for determining if Bridge is curved. For "Program Determined", the bridge
    layoutline will be used to determine if it is a straight or curved bridge.

    Field: IsCurved
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This field is only activated when the "Method for determining if Bridge is curved" is Userdefined.
    Table: Bridge DesReqSuper 20 - Param - AASHTOLRFD12 - SteelUCompService

    Page 285 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .

    Field: ShoredCnstr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Shored Construction?.

    Field: SlabResistT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Whether or not concrete slab resists tension.

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge DesReqSuper 21 - Param - AASHTOLRFD12 - SteelUCompCtrStg

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.
    Page 286 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.

    Field: PhiConTens
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Phi factor for concrete in tension.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: FactRupt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete modulus of rupture factor per Section 5.4.2.6, factor that multiplies sqrt of f'c to
    obtain modulus of rupture, default value 0.24 (ksi) or 0.63 (MPa), must be > 0.

    Field: FRUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modulus of rupture factor may be specified using either MPa or Ksi units.
    Table: Bridge DesReqSuper 22 - Param - AASHTOLRFD12 - SteelUCompCtrNStg

    Page 287 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.

    Field: PhiConTens
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Phi factor for concrete in tension.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: FactRupt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete modulus of rupture factor per Section 5.4.2.6, factor that multiplies sqrt of f'c to
    obtain modulus of rupture, default value 0.24 (ksi) or 0.63 (MPa), must be > 0.

    Field: FRUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modulus of rupture factor may be specified using either MPa or Ksi units.
    Page 288 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Bridge DesReqSuper 05 - Param - JTG-D62-2004 - CBoxStress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on compression capacity?.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'ck to calculate the compression limit.

    Field: PrstrClassB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    For Prestress Class B, the calculation of the section stress does not allow for any tensile
    stresses.
    Table: Bridge DesReqSuper 06 - Param - JTG-D62-2004 - CBoxCrkStress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on tension capacity.

    Page 289 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PrstrType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Prestress type. Must be Fully-prestressed Segmental, Fully-prestressed Prefabricated,
    Fully Prestressed Other, Class A Short-term, Class A Long-term, or Class B Self-weight.
    Choosing the prestress type resets the Tension Limit Factor and the Prestress load factor.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Tension limit factor. Fully-prestressed, defaults to 0.0. For Class A Short-term, defaults to
    0.7. For Class A Long-term, defaults to 0.0. For Class B Self-weight, defaults to 0.0.

    Field: PrstrLFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Prestress load factor. Fully-prestressed Segmental, defaults to 0.8. Fully-prestressed
    Prefabricated, defaults to 0.85. For all other cases, defaults to 1.0.
    Table: Bridge DesReqSuper 07 - Param - JTG-D62-2004 - CBoxFlexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on flexural capacity.
    Table: Bridge DesReqSuper 08 - Param - JTG-D62-2004 - CBoxShear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 290 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ChkSubType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    May be Shear only, Torsion only, or combined Shear-Torsion.

    Field: Alpha1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on tension and compression capacity for normal-weight concrete. For shear
    check.

    Field: Alpha2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Prestress increasing factor. Usually either 1.0 or 1.25. For shear check.

    Field: Alpha3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on tension and compression capacity for normal-weight concrete. For shear
    check.

    Field: cFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Minimum area ratio for shear-resisting stirrups. For shear check.

    Field: Ppercent
    Field is Imported: Yes
    Format: Controlled by program
    Units: Percent
    Area ratio of the longitudinal rebar and tendons in the tensile zone of the webs, expressed
    as a percentage. For shear check.

    Page 291 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BetaA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Determination of the box-section effective-thickness reduction factor. May be automatic or
    user-defined. For torsion check.

    Field: BetaAFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    May be set is the Beta_a calculation is user-defined. For torsion check.

    Field: Zeta
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Ratio of torsional rebar to shear rebar capacity. For torsion check.

    Field: Resal
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Include Resal (Haunched-girder) Effect on Shear. For shear check.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of vertical
    shear and/or torsional rebar required. For shear and torsion check.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required. For torsion check.
    Table: Bridge DesReqSuper 09 - Param - JTG-D62-2004 - CBoxPrinc

    Page 292 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on compression capacity.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'ck to calculate the compression limit.
    Table: Bridge DesReqSuper 10 - Param - JTG-D62-2004 - CBoxCrkPrinc

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on tension capacity.

    Field: PrstrType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Prestress type. Must be Fully-prestressed Cast-in-place, Fully Prestressed Prefabricated,
    Class A/B Cast-in-place, Class A/B Prefabricated, or User-defined. Choosing the prestress
    type resets the Tension Limit Factor.

    Page 293 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Tension limit factor. Fully-prestressed Cast-in-place is fixed at 0.4, Fully Prestressed
    Prefabricated is fixed at 0.6, Class A/B Cast-in-place is fixed at 0.5, Class A/B
    Prefabricated is fixed at 0.7. User-defined defaults to 0.4.
    Table: Bridge DesReqSuper 11 - Param - JTG-D62-2004 - CBoxTendonStress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The tendon tensile limit factor.
    Table: Bridge DesReqSuper 12 - Param - JTG-D62-2004 - CBoxCrackWidth

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: FactC1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The name of a bridge design request.

    Field: FactC2Opt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Determination of the long term action factor C2. May be Program Determined or userdefined.

    Page 294 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactC2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The value of the long term action factor C2. This item is required only if the factor C2
    option is user-defined.

    Field: FactC3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The member factor C3.

    Field: CrkWdthLim
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The crack width limit.
    Table: Bridge DesReqSuper 04 - LLDF - CANCSAS606

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: LLDistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: IntMomentM+
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Interior girder moment factor in positive moment region.

    Page 295 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IntMomentMField is Imported: Yes


    Format: Controlled by program
    Units: Unitless
    Interior girder moment factor in negative moment region.

    Field: IntShearM+
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Interior girder shear factor in positive moment region.

    Field: IntShearMField is Imported: Yes


    Format: Controlled by program
    Units: Unitless
    Interior girder shear factor in negative moment region.

    Field: ExtMomentM+
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Exterior girder moment factor in positive moment region.

    Field: ExtMomentMField is Imported: Yes


    Format: Controlled by program
    Units: Unitless
    Exterior girder moment factor in negative moment region.

    Field: ExtShearM+
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Exterior girder shear factor in positive moment region.

    Field: ExtShearMField is Imported: Yes


    Format: Controlled by program
    Units: Unitless
    Exterior girder shear factor in negative moment region.

    Page 296 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumLanes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Number of lanes.

    Field: FactLane1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    One-lane multiple-presence factor.

    Field: FactLane2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Two-lane multiple-presence factor.

    Field: FactLane3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Three-lane multiple-presence factor.

    Field: FactLane4
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Four-lane multiple-presence factor.

    Field: FactLane5
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Five-lane multiple-presence factor.

    Field: FactLane6
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Six-lane multiple-presence factor.
    Table: Bridge DesReqSuper 05 - Param - CANCSAS606 - CBoxStress
    Page 297 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on sqrt f'c [MPa] to calculate the tension stress limit.
    Table: Bridge DesReqSuper 06 - Param - CANCSAS606 - CBoxShear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiConc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete Resistance Factor.

    Field: PhiPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Prestressing Resistance Factor.

    Field: PhiRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Reinforcement Resistance Factor.
    Page 298 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FctCrkStrgth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    multiplies sqrt f'c [MPa] to obtain cracking strength.

    Field: EpsilonXNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    EpsilonX negative limit.

    Field: EpsilonXPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    EpsilonX positive limit.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.

    Field: TSlabCover
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Distance from the outside face of the top slab to the centerline of exterior closed
    transverse torsion reinforcement.

    Page 299 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WebCover
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Distance from the outside face of the web to the centerline of exterior closed transverse
    torsion reinforcement.

    Field: BSlabCover
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Distance from the outside face of the bottom slab to the centerline of exterior closed
    transverse torsion reinforcement.
    Table: Bridge DesReqSuper 07 - Param - CANCSAS606 - CBoxFlexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiConc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete Resistance Factor.

    Field: PhiPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Prestressing Resistance Factor.

    Field: PhiRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Reinforcement Resistance Factor.
    Table: Bridge DesReqSuper 08 - Param - CANCSAS606 - CBox2Stress

    Page 300 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on sqrt f'c [MPa] to calculate the tension stress limit.
    Table: Bridge DesReqSuper 09 - Param - CANCSAS606 - CBox2Shear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: HWayClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Highway class. It can be A, B, C and D.

    Field: PhiConc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete Resistance Factor.

    Field: PhiPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Prestressing Resistance Factor.
    Page 301 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Reinforcement Resistance Factor.

    Field: FctCrkStrgth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    multiplies sqrt f'c [MPa] to obtain cracking strength.

    Field: EpsilonXNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    EpsilonX negative limit.

    Field: EpsilonXPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    EpsilonX positive limit.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 10 - Param - CANCSAS606 - CBox2Flexure

    Page 302 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: HWayClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Highway class. It can be A, B, C and D.

    Field: PhiConc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete Resistance Factor.

    Field: PhiPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Prestressing Resistance Factor.

    Field: PhiRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Reinforcement Resistance Factor.
    Table: Bridge DesReqSuper 11 - Param - CANCSAS606 - PCCompStress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on f'c to calculate the compression stress limit.
    Page 303 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on sqrt f'c [MPa] to calculate the tension stress limit.
    Table: Bridge DesReqSuper 12 - Param - CANCSAS606 - PCCompShear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: HWayClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Highway class. It can be A, B, C and D.

    Field: PhiConc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete Resistance Factor.

    Field: PhiPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Prestressing Resistance Factor.

    Field: PhiRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Reinforcement Resistance Factor.

    Field: FctCrkStrgth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    multiplies sqrt f'c [MPa] to obtain cracking strength.
    Page 304 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EpsilonXNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    EpsilonX negative limit.

    Field: EpsilonXPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    EpsilonX positive limit.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 13 - Param - CANCSAS606 - PCCompFlexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: HWayClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Highway class. It can be A, B, C and D.

    Page 305 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiConc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete Resistance Factor.

    Field: PhiPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Prestressing Resistance Factor.

    Field: PhiRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Reinforcement Resistance Factor.
    Table: Bridge DesReqSuper 14 - Param - CANCSAS606 - SteelICompStrgth

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: HWayClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Highway class. It can be A, B, C and D.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor for steel flexure.

    Field: PhiSShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor for steel shear.
    Page 306 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiNW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor for concrete in composite construction.

    Field: PhiRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor for reinforcing steel in composite construction.

    Field: nLongTerm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    n modulus ratio (=ratio Es/Ec) multiplier for integer term (long term).

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Use Stage Analysis? It can be Yes or No.

    Field: Omega2Spec
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Omega2 factor specification - select method for determinining factor Omega2. It can be
    program determined or user defined.

    Field: Omega2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Omega2 factor - coefficient to account for increased moment resistance of a laterally
    unsuported beam segment when subject to moment gradient per 10.10.2.3.
    Table: Bridge DesReqSuper 15 - Param - CANCSAS606 - SteelICompService

    Page 307 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: HWayClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Highway class. It can be A, B, C and D.

    Field: nLongTerm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    n modulus ratio (=ratio Es/Ec) multiplier for integer term (long term).

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Use Stage Analysis? It can be Yes or No.
    Table: Bridge DesReqSuper 16 - Param - CANCSAS606 - SteelICompCtrStg

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor for steel flexure.

    Field: PhiSShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor for steel shear.
    Page 308 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiNW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor for concrete in composite construction.

    Field: PhiRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor for reinforcing steel in composite construction.

    Field: nLongTerm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    n modulus ratio (=ratio Es/Ec) multiplier for integer term (long term).

    Field: Omega2Spec
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Omega2 factor specification - select method for determinining factor Omega2. It can be
    program determined or user defined.

    Field: Omega2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Omega2 factor - coefficient to account for increased moment resistance of a laterally
    unsuported beam segment when subject to moment gradient per 10.10.2.3.
    Table: Bridge DesReqSuper 17 - Param - CANCSAS606 - SteelICompCtrNStg

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 309 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor for steel flexure.

    Field: PhiSShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor for steel shear.

    Field: PhiNW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor for concrete in composite construction.

    Field: PhiRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor for reinforcing steel in composite construction.

    Field: nLongTerm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    n modulus ratio (=ratio Es/Ec) multiplier for integer term (long term).

    Field: Omega2Spec
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Omega2 factor specification - select method for determinining factor Omega2. It can be
    program determined or user defined.

    Page 310 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Omega2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Omega2 factor - coefficient to account for increased moment resistance of a laterally
    unsuported beam segment when subject to moment gradient per 10.10.2.3.
    Table: Bridge DesReqSuper 04 - LLDF - EUROCODE

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: LLDistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: ExtFactV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Exterior girder shear factor.

    Field: IntFactV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Interior girder shear factor.

    Field: ExtFactM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Exterior girder moment factor.

    Page 311 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IntFactM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Interior girder moment factor.
    Table: Bridge DesReqSuper 05 - Param - EUROCODE - CBoxStress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on fck to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on fctk to calculate the tension stress limit.
    Table: Bridge DesReqSuper 06 - Param - EUROCODE - CBoxShear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Page 312 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: GammaPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: ThetaAng
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The angle between concrete compression strut and the beam axis perpendicular to the
    shear force. Value must be between 21.8 degree and 45 degree.

    Field: FactPTDuct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies PT duct diameter when evaluating nominal web thickness per 6.2.3
    (6). Typical values 0.5 to 1.2.

    Field: FactAplhaL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor for transmission length of PT, used in shear resistance equation 6.4. Typical values
    1.0 for post-tensioning.

    Field: MethdInrArm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the inner lever arm 'z' of section.

    Page 313 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LmtInrArm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies depth of section to get lower limit of the inner lever arm 'z' of
    section.

    Field: LmtEffDepth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies depth of section to get lower limit of the effective depth to tensile
    reinforcement 'd' of section.

    Field: SectionType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Type of section for shear design.

    Field: FlagNu1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the factor Nu1.

    Field: Nu1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor Nu1.

    Field: FlagAlphaCW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the factor AplhaCW.

    Page 314 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaCW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor AlphaCW.

    Field: FactFywk
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier of vertical shear rebar characteristic yield strength to obtain a stress limit in
    shear rebar used in 6.10.aN. Typical value 0.8 to 1.0.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 07 - Param - EUROCODE - CBoxFlexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Page 315 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: GammaPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: PrestrainPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor to estimate pre-strain in PT. Multiplies fpk to obtain stress in tendons after losses.
    Typical value between 0.4-0.9.
    Table: Bridge DesReqSuper 08 - Param - EUROCODE - CBox2Stress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on fck to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on fctk to calculate the tension stress limit.
    Table: Bridge DesReqSuper 09 - Param - EUROCODE - CBox2Shear

    Page 316 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: GammaPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: ThetaAng
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The angle between concrete compression strut and the beam axis perpendicular to the
    shear force. Value must be between 21.8 degree and 45 degree.

    Field: FactPTDuct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies PT duct diameter when evaluating nominal web thickness per 6.2.3
    (6). Typical values 0.5 to 1.2.

    Page 317 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactAplhaL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor for transmission length of PT, used in shear resistance equation 6.4. Typical values
    1.0 for post-tensioning.

    Field: MethdInrArm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the inner lever arm 'z' of section.

    Field: LmtInrArm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies depth of section to get lower limit of the inner lever arm 'z' of
    section.

    Field: LmtEffDepth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies depth of section to get lower limit of the effective depth to tensile
    reinforcement 'd' of section.

    Field: SectionType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Type of section for shear design.

    Field: FlagNu1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the factor Nu1.

    Page 318 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Nu1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor Nu1.

    Field: FlagAlphaCW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the factor AplhaCW.

    Field: AlphaCW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor AlphaCW.

    Field: FactFywk
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier of vertical shear rebar characteristic yield strength to obtain a stress limit in
    shear rebar used in 6.10.aN. Typical value 0.8 to 1.0.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 10 - Param - EUROCODE - CBox2Flexure

    Page 319 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: GammaPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: PrestrainPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor to estimate pre-strain in PT. Multiplies fpk to obtain stress in tendons after losses.
    Typical value between 0.4-0.9.
    Table: Bridge DesReqSuper 11 - Param - EUROCODE - PCCompStress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 320 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on fck to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on fctk to calculate the tension stress limit.
    Table: Bridge DesReqSuper 12 - Param - EUROCODE - PCCompShear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: GammaPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Page 321 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThetaAng
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The angle between concrete compression strut and the beam axis perpendicular to the
    shear force. Value must be between 21.8 degree and 45 degree.

    Field: FactAplhaL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor for transmission length of PT, used in shear resistance equation 6.4. Typical values
    1.0 for post-tensioning.

    Field: MethdInrArm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the inner lever arm 'z' of section.

    Field: LmtInrArm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies depth of section to get lower limit of the inner lever arm 'z' of
    section.

    Field: LmtEffDepth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies depth of section to get lower limit of the effective depth to tensile
    reinforcement 'd' of section.

    Field: SectionType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Type of section for shear design.

    Page 322 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FlagNu1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the factor Nu1.

    Field: Nu1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor Nu1.

    Field: FlagAlphaCW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the factor AplhaCW.

    Field: AlphaCW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor AlphaCW.

    Field: FactFywk
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier of vertical shear rebar characteristic yield strength to obtain a stress limit in
    shear rebar used in 6.10.aN. Typical value 0.8 to 1.0.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.

    Page 323 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 13 - Param - EUROCODE - PCCompFlexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: GammaPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: PrestrainPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor to estimate pre-strain in PT. Multiplies fpk to obtain stress in tendons after losses.
    Typical value between 0.4-0.9.
    Table: Bridge DesReqSuper 14 - Param - EUROCODE - SteelICompUltimate

    Page 324 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma c for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma c for rebar.

    Field: Gamma0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma0 for structural steel.

    Field: Gamma1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma1 for structural steel.

    Field: Gamma2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma2 for structural steel.

    Page 325 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: boMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method to evaluate distance bo between the centers of the outstand shear connectors: It
    can be (1)based on multiplier of top flange width, or (2)based on specified distance from
    outside edge of steel top flange.

    Field: boSpecified
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Distance in length units between outstand shear connector and edge of steel top flange.

    Field: boMultipl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier of steel top flange width that is used to determine minimum value for distance
    b0 between the centers of the outstand shear connectors.

    Field: LambdaLT0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Slenderness limit Lambda LT0 for lateral torsional buckling per EN 1993-1-1 6.3.2.3 (1).

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Stage Analysis to figure out stresses on composite section?.

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    n modular ratio (=ratio Es/Ec) multiplier used to determine long term composite section
    properties.

    Page 326 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EndPostType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    End post type per EN 1993-1-5 Figure 5.1. It can be (1)Non-Rigid End Post, or (2)Rigid
    End Post.

    Field: CheckWeb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use EN 1994-2 5.5.2 (3) to check if Class 3 web may qualify as Class 2 section using hole
    in the web method.
    Table: Bridge DesReqSuper 15 - Param - EUROCODE - SteelICompServStr

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma c for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma c for rebar.

    Field: GammaM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gammaM,ser for structural steel.

    Page 327 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Factk1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete service compression stress limit factor k1 per EN 1992-1-1 7.2(2).

    Field: Factk3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Reinforcement service tensile stress limit factor k3 per EN 1992-1-1 7.2(5).

    Field: boMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method to evaluate distance bo between the centers of the outstand shear connectors: It
    can be (1)based on multiplier of top flange width, or (2)based on specified distance from
    outside edge of steel top flange.

    Field: boSpecified
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Distance in length units between outstand shear connector and edge of steel top flange.

    Field: boMultipl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier of steel top flange width that is used to determine minimum value for distance
    b0 between the centers of the outstand shear connectors.

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Stage Analysis to figure out stresses on composite section?.

    Page 328 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    n modular ratio (=ratio Es/Ec) multiplier used to determine long term composite section
    properties.
    Table: Bridge DesReqSuper 16 - Param - EUROCODE - SteelICompServRebar

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma c for concrete.

    Field: Factk3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Reinforcement service tensile stress limit factor k3 per EN 1992-1-1 7.2(5).

    Field: boMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method to evaluate distance bo between the centers of the outstand shear connectors: It
    can be (1)based on multiplier of top flange width, or (2)based on specified distance from
    outside edge of steel top flange.

    Field: boSpecified
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Distance in length units between outstand shear connector and edge of steel top flange.

    Page 329 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: boMultipl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier of steel top flange width that is used to determine minimum value for distance
    b0 between the centers of the outstand shear connectors.

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Stage Analysis to figure out stresses on composite section?.

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    n modular ratio (=ratio Es/Ec) multiplier used to determine long term composite section
    properties.

    Field: CrackWidth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Design crack width per EN 1994-2, Table 7.1. There are three options: wk=0.2mm;
    wk=0.3mm and wk=0.4mm.

    Field: ConcStrgthT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Mean value of effective concrete tensile strength at the time when crack may first occur
    per EN1994-2 (7.1).

    Field: Factk
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor k per EN 1994-2 (7.1).

    Page 330 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Factks
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor ks per EN 1994-2 (7.1).
    Table: Bridge DesReqSuper 17 - Param - EUROCODE - SteelICompCtrStg

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma c for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma c for rebar.

    Field: Gamma0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma0 for structural steel.

    Field: Gamma1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma1 for structural steel.

    Field: Gamma2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma2 for structural steel.
    Page 331 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: boMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method to evaluate distance bo between the centers of the outstand shear connectors: It
    can be (1)based on multiplier of top flange width, or (2)based on specified distance from
    outside edge of steel top flange.

    Field: boSpecified
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Distance in length units between outstand shear connector and edge of steel top flange.

    Field: boMultipl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier of steel top flange width that is used to determine minimum value for distance
    b0 between the centers of the outstand shear connectors.

    Field: LambdaLT0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Slenderness limit Lambda LT0 for lateral torsional buckling per EN 1993-1-1 6.3.2.3 (1).

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    n modular ratio (=ratio Es/Ec) multiplier used to determine long term composite section
    properties.

    Field: EndPostType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    End post type per EN 1993-1-5 Figure 5.1. It can be (1)Non-Rigid End Post, or (2)Rigid
    End Post.

    Page 332 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CheckWeb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use EN 1994-2 5.5.2 (3) to check if Class 3 web may qualify as Class 2 section using hole
    in the web method.
    Table: Bridge DesReqSuper 18 - Param - EUROCODE - SteelICompCtrNStg

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma c for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma c for rebar.

    Field: Gamma0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma0 for structural steel.

    Field: Gamma1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma1 for structural steel.

    Page 333 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Gamma2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial factor gamma2 for structural steel.

    Field: boMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method to evaluate distance bo between the centers of the outstand shear connectors: It
    can be (1)based on multiplier of top flange width, or (2)based on specified distance from
    outside edge of steel top flange.

    Field: boSpecified
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Distance in length units between outstand shear connector and edge of steel top flange.

    Field: boMultipl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier of steel top flange width that is used to determine minimum value for distance
    b0 between the centers of the outstand shear connectors.

    Field: LambdaLT0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Slenderness limit Lambda LT0 for lateral torsional buckling per EN 1993-1-1 6.3.2.3 (1).

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    n modular ratio (=ratio Es/Ec) multiplier used to determine long term composite section
    properties.

    Page 334 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EndPostType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    End post type per EN 1993-1-5 Figure 5.1. It can be (1)Non-Rigid End Post, or (2)Rigid
    End Post.

    Field: CheckWeb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use EN 1994-2 5.5.2 (3) to check if Class 3 web may qualify as Class 2 section using hole
    in the web method.
    Table: Bridge DesReqSuper 04 - LLDF - IRC-2011

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: LLDistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: ExtFactV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Exterior girder shear factor.

    Field: IntFactV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Interior girder shear factor.

    Page 335 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ExtFactM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Exterior girder moment factor.

    Field: IntFactM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Interior girder moment factor.
    Table: Bridge DesReqSuper 05 - Param - IRC-112-2011 - CBoxStress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on fck to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on fctk to calculate the tension stress limit.
    Table: Bridge DesReqSuper 06 - Param - IRC-112-2011 - CBoxShear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 336 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: GammaPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: ThetaAng
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The angle between concrete compression strut and the beam axis perpendicular to the
    shear force. Value must be between 21.8 degree and 45 degree.

    Field: FactPTDuct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies PT duct diameter when evaluating nominal web thickness per 6.2.3
    (6). Typical values 0.5 to 1.2.

    Field: FactAplhaL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor for transmission length of PT, used in shear resistance equation 6.4. Typical values
    1.0 for post-tensioning.

    Page 337 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MethdInrArm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the inner lever arm 'z' of section.

    Field: LmtInrArm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies depth of section to get lower limit of the inner lever arm 'z' of
    section.

    Field: LmtEffDepth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies depth of section to get lower limit of the effective depth to tensile
    reinforcement 'd' of section.

    Field: SectionType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Type of section for shear design.

    Field: FlagNu1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the factor Nu1.

    Field: Nu1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor Nu1.

    Page 338 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FlagAlphaCW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the factor AplhaCW.

    Field: AlphaCW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor AlphaCW.

    Field: FactFywk
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier of vertical shear rebar characteristic yield strength to obtain a stress limit in
    shear rebar used in 6.10.aN. Typical value 0.8 to 1.0.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 07 - Param - IRC-112-2011 - CBoxFlexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 339 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: GammaPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: PrestrainPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor to estimate pre-strain in PT. Multiplies fpk to obtain stress in tendons after losses.
    Typical value between 0.4-0.9.
    Table: Bridge DesReqSuper 08 - Param - IRC-112-2011 - CBox2Stress

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on fck to calculate the compression stress limit.

    Page 340 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on fctk to calculate the tension stress limit.
    Table: Bridge DesReqSuper 09 - Param - IRC-112-2011 - CBox2Shear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: GammaPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: ThetaAng
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The angle between concrete compression strut and the beam axis perpendicular to the
    shear force. Value must be between 21.8 degree and 45 degree.

    Page 341 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactPTDuct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies PT duct diameter when evaluating nominal web thickness per 6.2.3
    (6). Typical values 0.5 to 1.2.

    Field: FactAplhaL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor for transmission length of PT, used in shear resistance equation 6.4. Typical values
    1.0 for post-tensioning.

    Field: MethdInrArm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the inner lever arm 'z' of section.

    Field: LmtInrArm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies depth of section to get lower limit of the inner lever arm 'z' of
    section.

    Field: LmtEffDepth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies depth of section to get lower limit of the effective depth to tensile
    reinforcement 'd' of section.

    Field: SectionType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Type of section for shear design.

    Page 342 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FlagNu1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the factor Nu1.

    Field: Nu1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor Nu1.

    Field: FlagAlphaCW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the factor AplhaCW.

    Field: AlphaCW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor AlphaCW.

    Field: FactFywk
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier of vertical shear rebar characteristic yield strength to obtain a stress limit in
    shear rebar used in 6.10.aN. Typical value 0.8 to 1.0.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.

    Page 343 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 10 - Param - IRC-112-2011 - CBox2Flexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: GammaPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: PrestrainPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor to estimate pre-strain in PT. Multiplies fpk to obtain stress in tendons after losses.
    Typical value between 0.4-0.9.
    Table: Bridge DesReqSuper 11 - Param - IRC-112-2011 - PCCompStress

    Page 344 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: FactCLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on fck to calculate the compression stress limit.

    Field: FactTLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier on fctk to calculate the tension stress limit.
    Table: Bridge DesReqSuper 12 - Param - IRC-112-2011 - PCCompShear

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: GammaPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.
    Page 345 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThetaAng
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The angle between concrete compression strut and the beam axis perpendicular to the
    shear force. Value must be between 21.8 degree and 45 degree.

    Field: FactAplhaL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor for transmission length of PT, used in shear resistance equation 6.4. Typical values
    1.0 for post-tensioning.

    Field: MethdInrArm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the inner lever arm 'z' of section.

    Field: LmtInrArm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies depth of section to get lower limit of the inner lever arm 'z' of
    section.

    Field: LmtEffDepth
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor that multiplies depth of section to get lower limit of the effective depth to tensile
    reinforcement 'd' of section.

    Field: SectionType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Type of section for shear design.

    Page 346 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FlagNu1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the factor Nu1.

    Field: Nu1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor Nu1.

    Field: FlagAlphaCW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method that will be used to calculate the factor AplhaCW.

    Field: AlphaCW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor AlphaCW.

    Field: FactFywk
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier of vertical shear rebar characteristic yield strength to obtain a stress limit in
    shear rebar used in 6.10.aN. Typical value 0.8 to 1.0.

    Field: RebarMatV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of transverse
    shear rebar required.

    Page 347 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A previously-defined rebar material that will be used to determine the area of longitudinal
    torsional rebar required.
    Table: Bridge DesReqSuper 13 - Param - IRC-112-2011 - PCCompFlexure

    Field: DesReqName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: GammaRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: GammaPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: PrestrainPT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor to estimate pre-strain in PT. Multiplies fpk to obtain stress in tendons after losses.
    Typical value between 0.4-0.9.
    Table: Bridge RateReqSuper 01 - General

    Page 348 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: CheckType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The check type of a bridge rating request.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Run
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The flag to indicate if the design request is selected for designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Design status.
    Table: Bridge RateReqSuper 02 - Station Ranges

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: Location
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Location before or after this station.
    Page 349 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StartType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    StartType can be the beginning of the selected bridge object or user-defined station.

    Field: StartSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This field is needed only when the StartType is User Defined.

    Field: EndType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    EndType can be the end of the selected bridge object or user-defined station.

    Field: EndSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This field is needed only when the EndType is User Defined.
    Table: Bridge RateReqSuper 03 - Demand Sets

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: DmndSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The demand set name of a bridge design request.

    Field: Combo
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load combination name of a demand set.
    Page 350 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Bridge RateReqSuper 04 - Param - AASHTOLRFD07 - CBoxShear

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear resistance factor, default Value = 1.0.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear system factor, default Value = 1.0.
    Table: Bridge RateReqSuper 05 - Param - AASHTOLRFD07 - CBoxFlexure

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure resistance factor, default Value = 1.0.

    Page 351 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure system factor, default Value = 1.0.
    Table: Bridge RateReqSuper 06 - Param - AASHTOLRFD07 - CBoxMinRebar

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: FactRupt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete minrebar modulus of rupture factor per Section 5.4.2.6, factor that multiplies sqrt
    of f'c to obtain modulus of rupture, default value 0.37 (ksi) or 0.97 (MPa), must be > 0).

    Field: FRUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modulus of rupture factor may be specified using either MPa or Ksi units.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor for concrete moment resistance.
    Table: Bridge RateReqSuper 07 - Param - AASHTOLRFD07 - CBox2Shear

    Page 352 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: PhiNW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    normal-weight concrete.

    Field: PhiLW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    light-weight concrete.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear system factor, default Value = 1.0.

    Field: SCType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Subcheck Type.

    Page 353 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NegSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Negative limit on strain in nonprestressed longitudinal tension reinforcement. (eq.
    5.8.3.4.2-4).

    Field: PosSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Positive limit on strain in nonprestressed longitudinal tension reinforcement.(eq. 5.8.3.4.24).

    Field: PhiCNu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_c Factor for applied factored axial force Nu (eq. 5.8.3.5-1).

    Field: PhiCMu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_f Factor for factored moment at section Mu. (eq. 5.8.3.5-1).

    Field: SX
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximumum distance between layers of longitudinal crack control reinforcement per
    AASHTO LRFD 5.8.3.4.2-5.

    Field: AggSize
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximum aggregate size, Eq 5.8.3.4.2. This parameter is used only when min transverse
    reinforcement is not provided.

    Page 354 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PPMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify approach to proportioning of transverse reinforcement per AASHTO LRFD
    Section C5.8.3.2. There are two options: proportioning per Figure C5.8.3.2-1 (Default)
    and proportioning per Figure C5.8.3.2-2.

    Field: SignMuMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify option of how to determine sign of MuMin=(Vu-Vp)*dv when demand Mu<(VuVp)*dv (Eq. 5.8.3.4.2-4). There are four options: 1:Automatic by CSiBridge; 2:Sign of
    MuMin equal to Mu; 3:Add two MuMin - one positive, one negative; and 4:do not
    generate MuMin, use Mu.
    Table: Bridge RateReqSuper 08 - Param - AASHTOLRFD07 - CBox2Flexure

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure resistance factor, default Value = 1.0.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure system factor, default Value = 1.0.
    Table: Bridge RateReqSuper 09 - Param - AASHTOLRFD07 - CBox2MinRebar

    Page 355 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: FactRupt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete minrebar modulus of rupture factor per Section 5.4.2.6, factor that multiplies sqrt
    of f'c to obtain modulus of rupture, default value 0.37 (ksi) or 0.97 (MPa), must be > 0).

    Field: FRUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modulus of rupture factor may be specified using either MPa or Ksi units.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor for concrete moment resistance.
    Table: Bridge RateReqSuper 10 - Param - AASHTOLRFD07 - PCCompShear

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: PhiNW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    normal-weight concrete.

    Page 356 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiLW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    light-weight concrete.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear system factor, default Value = 1.0.

    Field: SCType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Subcheck Type.

    Field: NegSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Negative limit on strain in nonprestressed longitudinal tension reinforcement. (eq.
    5.8.3.4.2-4).

    Field: PosSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Positive limit on strain in nonprestressed longitudinal tension reinforcement.(eq. 5.8.3.4.24).

    Page 357 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiCNu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_c Factor for applied factored axial force Nu (eq. 5.8.3.5-1).

    Field: PhiCMu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_f Factor for factored moment at section Mu. (eq. 5.8.3.5-1).

    Field: SX
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximumum distance between layers of longitudinal crack control reinforcement per
    AASHTO LRFD 5.8.3.4.2-5.

    Field: AggSize
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximum aggregate size, Eq 5.8.3.4.2. This parameter is used only when min transverse
    reinforcement is not provided.

    Field: PPMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify approach to proportioning of transverse reinforcement per AASHTO LRFD
    Section C5.8.3.2. There are two options: proportioning per Figure C5.8.3.2-1 (Default)
    and proportioning per Figure C5.8.3.2-2.

    Field: SignMuMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify option of how to determine sign of MuMin=(Vu-Vp)*dv when demand Mu<(VuVp)*dv (Eq. 5.8.3.4.2-4). There are four options: 1:Automatic by CSiBridge; 2:Sign of
    MuMin equal to Mu; 3:Add two MuMin - one positive, one negative; and 4:do not
    generate MuMin, use Mu.
    Table: Bridge RateReqSuper 11 - Param - AASHTOLRFD07 - PCCompFlexure
    Page 358 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure resistance factor, default Value = 1.0.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure system factor, default Value = 1.0.
    Table: Bridge RateReqSuper 12 - Param - AASHTOLRFD07 - PCCompMinRebar

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: FactRupt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete minrebar modulus of rupture factor per Section 5.4.2.6, factor that multiplies sqrt
    of f'c to obtain modulus of rupture, default value 0.37 (ksi) or 0.97 (MPa), must be > 0).

    Page 359 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FRUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modulus of rupture factor may be specified using either MPa or Ksi units.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor for concrete moment resistance.
    Table: Bridge RateReqSuper 13 - Param - AASHTOLRFD07 - StINonCompStrgth

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    System factor, default Value = 1.0.
    Page 360 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AppendixA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Appendix A to determine resistance in negative moment regions?.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: IgnorePLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Ignore Cross-Section Proportion Limits per 6.10.2?.

    Field: DetMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method for determining if Bridge is curved. For "Program Determined", the bridge
    layoutline will be used to determine if it is a straight or curved bridge.

    Field: IsCurved
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This field is only activated when the "Method for determining if Bridge is curved" is Userdefined.
    Table: Bridge RateReqSuper 14 - Param - AASHTOLRFD07 - StINonCompServ

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Page 361 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    System factor, default Value = 1.0.

    Field: IgnorePLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Ignore Cross-Section Proportion Limits per 6.10.2?.
    Table: Bridge RateReqSuper 15 - Param - AASHTOLRFD07 - StICompStrgth

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Condition factor, default Value = 1.0.
    Page 362 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    System factor, default Value = 1.0.

    Field: AppendixA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Appendix A to determine resistance in negative moment regions?.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: IgnorePLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Ignore Cross-Section Proportion Limits per 6.10.2?.

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Stage Analysis load case to determine stresses on composite section?.

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplies short term modular ratio (Es/Ec) to obtain long-term modular ratio.

    Field: ShoredCnstr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Shored Construction?.

    Page 363 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DetMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method for determining if Bridge is curved. For "Program Determined", the bridge
    layoutline will be used to determine if it is a straight or curved bridge.

    Field: IsCurved
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This field is only activated when the "Method for determining if Bridge is curved" is Userdefined.
    Table: Bridge RateReqSuper 16 - Param - AASHTOLRFD07 - StICompServ

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    System factor, default Value = 1.0.

    Page 364 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IgnorePLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Ignore Cross-Section Proportion Limits per 6.10.2?.

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Stage Analysis load case to determine stresses on composite section?.

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplies short term modular ratio (Es/Ec) to obtain long-term modular ratio.

    Field: ShoredCnstr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Shored Construction?.

    Field: SlabResistT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Whether or not concrete slab resists tension.
    Table: Bridge RateReqSuper 04 - Param - AASHTORATE11 - CBoxShear

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear resistance factor, default Value = 1.0.
    Page 365 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear system factor, default Value = 1.0.
    Table: Bridge RateReqSuper 05 - Param - AASHTORATE11 - CBoxFlexure

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure resistance factor, default Value = 1.0.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure system factor, default Value = 1.0.
    Table: Bridge RateReqSuper 06 - Param - AASHTORATE11 - CBoxMinRebar

    Page 366 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: FactRupt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete minrebar modulus of rupture factor per Section 5.4.2.6, factor that multiplies sqrt
    of f'c to obtain modulus of rupture, default value 0.37 (ksi) or 0.97 (MPa), must be > 0).

    Field: FRUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modulus of rupture factor may be specified using either MPa or Ksi units.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor for concrete moment resistance.
    Table: Bridge RateReqSuper 07 - Param - AASHTORATE11 - CBox2Shear

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: PhiNW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    normal-weight concrete.

    Page 367 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiLW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    light-weight concrete.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear system factor, default Value = 1.0.

    Field: SCType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Subcheck Type.

    Field: NegSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Negative limit on strain in nonprestressed longitudinal tension reinforcement. (eq.
    5.8.3.4.2-4).

    Field: PosSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Positive limit on strain in nonprestressed longitudinal tension reinforcement.(eq. 5.8.3.4.24).

    Page 368 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiCNu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_c Factor for applied factored axial force Nu (eq. 5.8.3.5-1).

    Field: PhiCMu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_f Factor for factored moment at section Mu. (eq. 5.8.3.5-1).

    Field: SX
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximumum distance between layers of longitudinal crack control reinforcement per
    AASHTO LRFD 5.8.3.4.2-5.

    Field: AggSize
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximum aggregate size, Eq 5.8.3.4.2. This parameter is used only when min transverse
    reinforcement is not provided.

    Field: PPMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify approach to proportioning of transverse reinforcement per AASHTO LRFD
    Section C5.8.3.2. There are two options: proportioning per Figure C5.8.3.2-1 (Default)
    and proportioning per Figure C5.8.3.2-2.

    Field: SignMuMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify option of how to determine sign of MuMin=(Vu-Vp)*dv when demand Mu<(VuVp)*dv (Eq. 5.8.3.4.2-4). There are four options: 1:Automatic by CSiBridge; 2:Sign of
    MuMin equal to Mu; 3:Add two MuMin - one positive, one negative; and 4:do not
    generate MuMin, use Mu.
    Table: Bridge RateReqSuper 08 - Param - AASHTORATE11 - CBox2Flexure
    Page 369 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure resistance factor, default Value = 1.0.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure system factor, default Value = 1.0.
    Table: Bridge RateReqSuper 09 - Param - AASHTORATE11 - CBox2MinRebar

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: FactRupt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete minrebar modulus of rupture factor per Section 5.4.2.6, factor that multiplies sqrt
    of f'c to obtain modulus of rupture, default value 0.37 (ksi) or 0.97 (MPa), must be > 0).

    Page 370 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FRUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modulus of rupture factor may be specified using either MPa or Ksi units.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor for concrete moment resistance.
    Table: Bridge RateReqSuper 10 - Param - AASHTORATE11 - PCCompShear

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: PhiNW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    normal-weight concrete.

    Field: PhiLW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Factor - multiplies nominal shear resistance to obtain factored resistance for
    light-weight concrete.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear condition factor, default Value = 1.0.

    Page 371 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete shear system factor, default Value = 1.0.

    Field: SCType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Subcheck Type.

    Field: NegSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Negative limit on strain in nonprestressed longitudinal tension reinforcement. (eq.
    5.8.3.4.2-4).

    Field: PosSLL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Positive limit on strain in nonprestressed longitudinal tension reinforcement.(eq. 5.8.3.4.24).

    Field: PhiCNu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_c Factor for applied factored axial force Nu (eq. 5.8.3.5-1).

    Field: PhiCMu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance Phi_f Factor for factored moment at section Mu. (eq. 5.8.3.5-1).

    Page 372 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SX
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximumum distance between layers of longitudinal crack control reinforcement per
    AASHTO LRFD 5.8.3.4.2-5.

    Field: AggSize
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Maximum aggregate size, Eq 5.8.3.4.2. This parameter is used only when min transverse
    reinforcement is not provided.

    Field: PPMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify approach to proportioning of transverse reinforcement per AASHTO LRFD
    Section C5.8.3.2. There are two options: proportioning per Figure C5.8.3.2-1 (Default)
    and proportioning per Figure C5.8.3.2-2.

    Field: SignMuMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Specify option of how to determine sign of MuMin=(Vu-Vp)*dv when demand Mu<(VuVp)*dv (Eq. 5.8.3.4.2-4). There are four options: 1:Automatic by CSiBridge; 2:Sign of
    MuMin equal to Mu; 3:Add two MuMin - one positive, one negative; and 4:do not
    generate MuMin, use Mu.
    Table: Bridge RateReqSuper 11 - Param - AASHTORATE11 - PCCompFlexure

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure resistance factor, default Value = 1.0.
    Page 373 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete flexure system factor, default Value = 1.0.
    Table: Bridge RateReqSuper 12 - Param - AASHTORATE11 - PCCompMinRebar

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: FactRupt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Concrete minrebar modulus of rupture factor per Section 5.4.2.6, factor that multiplies sqrt
    of f'c to obtain modulus of rupture, default value 0.37 (ksi) or 0.97 (MPa), must be > 0).

    Field: FRUnit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modulus of rupture factor may be specified using either MPa or Ksi units.

    Field: Phi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor for concrete moment resistance.
    Table: Bridge RateReqSuper 13 - Param - AASHTORATE11 - StINonCompStrgth

    Page 374 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    System factor, default Value = 1.0.

    Field: AppendixA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Appendix A to determine resistance in negative moment regions?.

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Page 375 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IgnorePLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Ignore Cross-Section Proportion Limits per 6.10.2?.

    Field: DetMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method for determining if Bridge is curved. For "Program Determined", the bridge
    layoutline will be used to determine if it is a straight or curved bridge.

    Field: IsCurved
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This field is only activated when the "Method for determining if Bridge is curved" is Userdefined.
    Table: Bridge RateReqSuper 14 - Param - AASHTORATE11 - StINonCompServ

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    System factor, default Value = 1.0.

    Page 376 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IgnorePLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Ignore Cross-Section Proportion Limits per 6.10.2?.
    Table: Bridge RateReqSuper 15 - Param - AASHTORATE11 - StICompStrgth

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for shear.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    System factor, default Value = 1.0.

    Field: AppendixA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Appendix A to determine resistance in negative moment regions?.
    Page 377 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LStiffener
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Do webs have longitudinal stiffeners?.

    Field: IgnorePLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Ignore Cross-Section Proportion Limits per 6.10.2?.

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Stage Analysis load case to determine stresses on composite section?.

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplies short term modular ratio (Es/Ec) to obtain long-term modular ratio.

    Field: ShoredCnstr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Shored Construction?.

    Field: DetMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method for determining if Bridge is curved. For "Program Determined", the bridge
    layoutline will be used to determine if it is a straight or curved bridge.

    Page 378 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IsCurved
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This field is only activated when the "Method for determining if Bridge is curved" is Userdefined.
    Table: Bridge RateReqSuper 16 - Param - AASHTORATE11 - StICompServ

    Field: Request
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: PhiFlex
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor Phi for flexure.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Condition factor, default Value = 1.0.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    System factor, default Value = 1.0.

    Field: IgnorePLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Ignore Cross-Section Proportion Limits per 6.10.2?.

    Page 379 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Staged
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Use Stage Analysis load case to determine stresses on composite section?.

    Field: nFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplies short term modular ratio (Es/Ec) to obtain long-term modular ratio.

    Field: ShoredCnstr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Shored Construction?.

    Field: SlabResistT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Whether or not concrete slab resists tension.
    Table: Bridge Abutment Definitions

    Field: Abutment
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge abutment property.

    Field: GirderSup
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Integral or Bottom indicating the girder support condition at the abutment.

    Field: SubType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Spring or Beam indicating the abutment substructure type.
    Page 380 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The frame section property assigned to the abutment substructure beam. This item only
    applies when the SubType item is Beam.

    Field: BeamLength
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total length of the abutment substructure beam. This item only applies when the
    SubType item is Beam.

    Field: FSProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Pinned, Fixed or the name of a defined Bridge Foundation Spring property.
    Table: Bridge Bearing Definitions

    Field: Bearing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge bearing property.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The item is either Link or User indicating how the bearing properties are specified. Link
    means that the properties are described by specifying a link property. User means that
    each degree of freedom is specified to be Fixed, Free or Partially Fixed with a spring
    stiffness.

    Field: LinkProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property. This item only applies if the Type item is Link.

    Page 381 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U1Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the support condition for the U1
    degree of freedom.

    Field: U2Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the support condition for the U2
    degree of freedom.

    Field: U3Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the support condition for the U3
    degree of freedom.

    Field: R1Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the support condition for the R1
    degree of freedom.

    Field: R2Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the support condition for the R2
    degree of freedom.

    Field: R3Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the support condition for the R3
    degree of freedom.

    Page 382 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U1Stiff
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The stiffness of the partial fixity spring for the U1 degree of freedom.

    Field: U2Stiff
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The stiffness of the partial fixity spring for the U2 degree of freedom.

    Field: U3Stiff
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The stiffness of the partial fixity spring for the U3 degree of freedom.

    Field: R1Stiff
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The stiffness of the partial fixity spring for the R1 degree of freedom.

    Field: R2Stiff
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The stiffness of the partial fixity spring for the R2 degree of freedom.

    Field: R3Stiff
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The stiffness of the partial fixity spring for the R3 degree of freedom.
    Table: Bridge Bent Definitions 1 - General

    Field: Bent
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge bent.
    Page 383 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamLength
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total length of the bent cap beam.

    Field: BeamSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The frame section property assigned to the bent cap beam.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Single or Double indicating that there is either a single bearing line
    (continuous superstructure), or double bearing lines (discontinuous superstructure).

    Field: GirderSup1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Integral or Bottom indicating the girder support condition at the bent. This
    item applies when the Type item is Single, and it represents the girder support condition
    before the bent when the Type item is Double.

    Field: BearDist1
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    This item only applies when the Type item is Double. It is the distance from the specified
    bent location to the bearing line before the bent measured along the layout line.

    Field: GirderSup2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies when the Type item is Double. It is either Integral or Bottom
    indicating the girder support condition after the bent.

    Page 384 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BearDist2
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    This item only applies when the Type item is Double. It is the distance from the specified
    bent location to the bearing line after the bent measured along the layout line.

    Field: NumCols
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of columns in the bridge bent.
    Table: Bridge Bent Definitions 2 - Column Data

    Field: Bent
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge bent.

    Field: ColNum
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The bridge bent column number.

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The frame section property assigned to the bent column.

    Field: Distance
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the left end of the bent cap beam to the center of the considered bent
    column.

    Page 385 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Height
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The height of the considered bent column measured from the base of the column to the top
    of the bent cap beam.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise in degrees from a line parallel to the bent to the
    positive local 2 axis of the column.

    Field: ColSupport
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Pinned, Fixed or the name of a defined Bridge Foundation Spring property.

    Field: RHLong
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The relative clear heights (from -1.0 to 2.0) from the base of the column to the point of
    contraflexure under longitudinal horizontal loading (normal to the plane of the bent) at the
    top of the bent, used to determine the hinge lengths for bridge seismic design. Only
    concrete columns are affected.

    Field: RHTrans
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The relative clear heights (from -1.0 to 2.0) from the base of the column to the point of
    contraflexure under transverse horizontal loading (in the plane of the bent) at the top of the
    bent, used to determine the hinge lengths for bridge seismic design. Only concrete
    columns are affected.

    Page 386 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HingeTop
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A user-defined hinge property to be automatically assigned to the bent column. The hinge
    length will be computed automatically and used to locate the hinge near the top of the
    column. This is for bridge seismic design only.

    Field: HingeBot
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A user-defined hinge property to be automatically assigned to the bent column. The hinge
    length will be computed automatically and used to locate the hinge near the bottom of the
    column. This is for bridge seismic design only.

    Field: R1Release
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the release condition for the R1
    degree of freedom at the top of the column.

    Field: R2Release
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the release condition for the R2
    degree of freedom at the top of the column.

    Field: R3Release
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the release condition for the R3
    degree of freedom at the top of the column.

    Field: R1Stiff
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The stiffness of the partial fixity spring for the R1 degree of freedom.

    Page 387 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R2Stiff
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The stiffness of the partial fixity spring for the R2 degree of freedom.

    Field: R3Stiff
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The stiffness of the partial fixity spring for the R3 degree of freedom.
    Table: Bridge Diaphragm Definitions

    Field: Diaph
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge diaphragm property.

    Field: DiaphType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Solid, Brace or Single Beam indicating the type of diaphragm.
    Solid diaphragms are only applicable to concrete bridge sections. Brace and Single Beam
    diaphragms are only applicable to steel bridge sections.

    Field: Thickness
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of a solid diaphragm. This item only applies when the DiaphType item is
    Solid.

    Field: IncTopChord
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then the top chord is included in a Brace type diaphragm. This item
    only applies when the DiaphType item is Brace.

    Page 388 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IncBrace
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then the braces are included in a Brace type diaphragm. This item only
    applies when the DiaphType item is Brace.

    Field: IncBotChord
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then the bottom chord is included in a Brace type diaphragm. This item
    only applies when the DiaphType item is Brace.

    Field: TopChord
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the steel frame section used for the top chord in a Brace type diaphragm.
    This item only applies when the DiaphType item is Brace and the IncTopChord item is
    Yes.

    Field: BraceType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either V, Inverted V or X indicating the brace type.

    Field: Brace
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the steel frame section used for the braces in a Brace type diaphragm. This
    item only applies when the DiaphType item is Brace and the IncBrace item is Yes.

    Field: BotChord
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the steel frame section used for the bottom chord in a Brace type diaphragm.
    This item only applies when the DiaphType item is Brace and the IncBotChord item is
    Yes.

    Page 389 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Beam
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the steel frame section used for the beam in a Single beam type diaphragm.
    This item only applies when the DiaphType item is Single Beam.

    Field: BeamDist
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    When the DiaphType item is Single Beam this is the distance from the top of the beam to
    the top
    When the DiaphType item is Brace this is the distance from the top brace work point to the
    top of the adjacent girder. A positive distance means that the brace work point is below
    the top of the adjacent girder.
    This item does not apply when the DiaphType item is Solid.

    Field: BeamDistBot
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the DiaphType item is Brace.

    Field: MatPlatDia
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material of the internal steel plate diaphragm.

    Field: ThickWeb
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The web thickness of the internal steel plate diaphragm.

    Field: WidthFlange
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The top flange width of the internal steel plate diaphragm.
    Page 390 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThickFlange
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The top flange thickness of the internal steel plate diaphragm.

    Field: IncConnPlat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then the connection plates are included in a Brace or Beam type
    diaphragm. This item only applies when the DiaphType item is Brace or Beam.

    Field: MatCnPlat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material of the steel connection plate. This item only applies when the DiaphType
    item is Brace or Beam.

    Field: WidthCnPlat
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the steel connection plate. This item only applies when the DiaphType item
    is Brace or Beam.

    Field: ThickCnPlat
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the steel connection plate. This item only applies when the DiaphType
    item is Brace or Beam.

    Field: BothSideWeb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then the connection plate is added to both sides of the girder web. This
    item only applies when the DiaphType item is Brace or Beam.
    Table: Bridge Foundation Spring Definitions

    Page 391 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FndSpring
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge foundation spring.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The item is either Link or User indicating how the foundation spring properties are
    specified. Link.

    Field: LinkProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property. This item only applies if the Type item is Link.

    Field: U1Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the support condition for the U1
    degree of freedom.

    Field: U2Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the support condition for the U2
    degree of freedom.

    Field: U3Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the support condition for the U3
    degree of freedom.

    Page 392 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R1Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the support condition for the R1
    degree of freedom.

    Field: R2Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the support condition for the R2
    degree of freedom.

    Field: R3Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Free, Fixed or Partial Fixed indicating the support condition for the R3
    degree of freedom.

    Field: U1Stiff
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The stiffness of the partial fixity spring for the U1 degree of freedom.

    Field: U2Stiff
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The stiffness of the partial fixity spring for the U2 degree of freedom.

    Field: U3Stiff
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The stiffness of the partial fixity spring for the U3 degree of freedom.

    Page 393 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R1Stiff
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The stiffness of the partial fixity spring for the R1 degree of freedom.

    Field: R2Stiff
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The stiffness of the partial fixity spring for the R2 degree of freedom.

    Field: R3Stiff
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The stiffness of the partial fixity spring for the R3 degree of freedom.

    Field: DefLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The user property is defined for this length when it is used in a line spring.

    Field: DefArea
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The user property is defined for this area when it is used in an area spring.
    Table: Bridge Layout Line 1 - General

    Field: LayoutLine
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge layout line.

    Page 394 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system in which the X, Y and Z coordinates of the initial point on the
    bridge layout line are specified.

    Field: X
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The X coordinate of the initial point on the bridge layout line in the specified coordinate
    system.

    Field: Y
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of the initial point on the bridge layout line in the specified coordinate
    system.

    Field: Z
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Z coordinate of the initial point on the bridge layout line in the specified coordinate
    system.

    Field: GlobalX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The X coordinate of the initial point on the bridge layout line in the global coordinate
    system.

    Field: GlobalY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of the initial point on the bridge layout line in the global coordinate
    system.

    Page 395 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GlobalZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Z coordinate of the initial point on the bridge layout line in the global coordinate
    system.
    Table: Bridge Layout Line 2 - Horizontal Layout Data

    Field: LayoutLine
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge layout line.

    Field: SegType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The horizontal layout segment type. This is one of the following:
    Initial Station and Bearing,
    Straight at Previous Bearing to End,
    Straight at Previous Bearing To Station,
    Straight at New Bearing To Station,
    Curve Right to New Bearing at Station,
    Curve Left to New Bearing at Station.

    Field: Station
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    A station along the layout line.

    Field: Radius
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The radius of a curve in the layout line. This item is only applicable if the SegType item
    isCurve Right to New Bearing at Station Product of Inertia about 2-3 Curve Left to New
    Bearing at Station.
    Note that these curves may be circular curves with spiral transitions. The radius specified
    is the radius of the circular portion of the curve.

    Page 396 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Bearing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The bearing angle of the layout line at the specified station.
    This item is only applicable if the SegType item is Initial Station and Bearing, Straight at
    New Bearing To Station, Curve Right to New Bearing at Station or Curve Left to New
    Bearing at Station.
    In a valid bearing the first character is either N or S and the last character is either E or W.
    N, S, E and W signify North, South, East and West respectively.
    The second through second-to-last characters specify an angle between 0 and 90 degrees,
    inclusive. The angle is specified as an integer number of degrees followed by an integer
    number of minutes followed by a real number of seconds.
    The minutes and the seconds must each be less than 60. The degrees can not exceed 90,
    and, if either the minutes or seconds is nonzero then the degrees can not exceed 89.
    Examples of valid bearings are N624329E, N62*43'29"E, N62E, S070403W,
    S07*04'03"W, S7*4'3"W, S7W, S074W, S07043W, N243627.25W, and N24*36'27.25"W.
    Bearings can also be specified as Default or DefaultX where x is a positive or negative
    number indicating the angle in degrees that the bearing is different from the default
    bearing.

    Field: CoordSys
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The coordinate system in which the X, and Y coordinates of the specified station on the
    bridge layout line are reported.

    Field: X
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The X coordinate of the specified station on the bridge layout line in the specified
    coordinate system.

    Page 397 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Y
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of the specified station on the bridge layout line in the specified
    coordinate system.

    Field: GlobalX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The X coordinate of the specified station on the bridge layout line in the global coordinate
    system.

    Field: GlobalY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of the specified station on the bridge layout line in the global coordinate
    system.
    Table: Bridge Layout Line 3 - Vertical Layout Data

    Field: LayoutLine
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge layout line.

    Field: SegType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The vertical layout segment type. This is one of the following:
    Initial Station, Elevation Z and Grade,
    Constant at Previous Grade to End,
    Constant At Previous Grade to Station,
    Constant At New Grade to Station,
    Constant Grade to New Elevation at Station,
    Parabolic to New Grade at Station,
    Circular to New Grade at Station.

    Page 398 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    .

    Field: Grade
    Field is Imported: Yes
    Format: Controlled by program
    Units: Percent
    The grade (in percent) at the specified station along the layout line. This item is not
    applicable for import when the SegType item is Constant Grade to New Elevation at
    Station.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system in which the Z coordinate of the specified station on the bridge
    layout line is reported.

    Field: Z
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Z coordinate of the specified station on the bridge layout line in the specified
    coordinate system. This item is only applicable for import when the SegType item is
    Constant Grade to New Elevation at Station.

    Field: GlobalZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Z coordinate of the specified station on the bridge layout line in the global coordinate
    system.
    Table: Bridge Layout Line 4 - Layout Line Points

    Field: LayoutLine
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge layout line.

    Page 399 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    A point along the bridge layout line. These points are calculated by the program from the
    bridge layout line definition data.

    Field: CoordSys
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The coordinate system in which the X, Y and Z coordinates of the specified point along
    the bridge layout line are reported.

    Field: X
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The X coordinate of the specified point along the bridge layout line in the specified
    coordinate system.

    Field: Y
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of the specified point along the bridge layout line in the specified
    coordinate system.

    Field: Z
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Z coordinate of the specified point along the bridge layout line in the specified
    coordinate system.

    Field: GlobalX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The X coordinate of the specified point along the bridge layout line in the global
    coordinate system.

    Page 400 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GlobalY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of the specified point along the bridge layout line in the global
    coordinate system.

    Field: GlobalZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Z coordinate of the specified point along the bridge layout line in the global
    coordinate system.
    Table: Bridge Load Definitions 01 - Point

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge point load definition.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Force or Moment indicating the load type.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Local or the name of a defined coordinate system indicating the coordinate
    system in which the load is defined.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load direction. If the CoordSys item is Local then this is either 1, 2 or 3.
    If the CoordSys item is Global then this is either X, Y, Z or Gravity.
    If the CoordSys item is some other defined coordinate system then this is either X, Y or Z.
    .

    Page 401 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RefLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Left Edge of Deck or Right Edge of Deck indicating the reference location
    from which the Dist item is measured.

    Field: Dist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the specified reference location (RefLoc item) to the load. This value
    should always be greater than or equal to zero..

    Field: Force
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The load value when the Type item is Force.

    Field: Moment
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The load value when the Type item is Moment.
    Table: Bridge Load Definitions 02 - Line

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge area load definition.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Force or Moment indicating the load type.

    Page 402 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Local or the name of a defined coordinate system indicating the coordinate
    system in which the load is defined.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load direction. If the CoordSys item is Local then this is either 1, 2 or 3.
    If the CoordSys item is Global then this is either X, Y, Z, Gravity, X Projected, Y
    Projected, Z Projected or Gravity Projected.
    If the CoordSys item is some other defined coordinate system then this is either X, Y, Z, X
    Projected, Y Projected or Z Projected.
    .

    Field: RefLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Left Edge of Deck or Right Edge of Deck indicating the reference location
    from which the Dist item is measured.

    Field: Dist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the specified reference location (RefLoc item) to the load. This value
    should always be greater than or equal to zero..

    Field: FOverL
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The load value when the Type item is Force.

    Field: MOverL
    Field is Imported: Yes
    Format: Moment/Length (Forces section of form)
    Units: Force-Length/Length
    The load value when the Type item is Moment.
    Page 403 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Bridge Load Definitions 03 - Area

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge line load definition.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Force or Moment indicating the load type.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Local or the name of a defined coordinate system indicating the coordinate
    system in which the load is defined.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load direction. If the CoordSys item is Local then this is either 1, 2 or 3.
    If the CoordSys item is Global then this is either X, Y, Z, Gravity, X Projected, Y
    Projected, Z Projected or Gravity Projected.
    If the CoordSys item is some other defined coordinate system then this is either X, Y, Z, X
    Projected, Y Projected or Z Projected.
    .

    Field: RefLocLft
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Left Edge of Deck or Right Edge of Deck indicating the reference location
    from which the DistLft item is measured.

    Page 404 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DistLft
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the specified left reference location (RefLocLft item) to the left edge of
    the load area. This value should always be greater than or equal to zero..

    Field: RefLocRgt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Left Edge of Deck or Right Edge of Deck indicating the reference location
    from which the DistRgt item is measured.

    Field: DistRgt
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the specified right reference location (RefLocRgt item) to the right edge
    of the load area. This value should always be greater than or equal to zero..

    Field: FOverL2Lft
    Field is Imported: Yes
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    The load value along the left edge of the load area when the Type item is Force.

    Field: FOverL2Rgt
    Field is Imported: Yes
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    The load value along the right edge of the load area when the Type item is Force.

    Field: MOverL2Lft
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The load value along the left edge of the load area when the Type item is Moment.

    Page 405 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MOverL2Rgt
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The load value along the right edge of the load area when the Type item is Moment.
    Table: Bridge Model Summary 01 - Bearing Supports

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the span that the bent belongs to.

    Field: Station
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The station of the bent.

    Field: Type
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type that the bearing is used for. It can be Abutment, Bent or Hinge.

    Field: Bearing
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The bearing number counted from the left end of the bent cap beam/in-span
    hinge/abutment to the center of the considered bearing.

    Page 406 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BearProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is the name of a defined bridge bearing property that is used as a bearing at each
    girder.

    Field: BearElev
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    This is the Global Z elevation of the bearings.

    Field: BearAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    This is the rotation angle in degrees of the bearing local 3 axis from its default orientation
    that is parallel to the layout line.
    .
    Table: Bridge Object Definitions 01 - General

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: LayoutLine
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge layout line associated with the bridge object.

    Field: NumSpans
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of spans defined in the bridge object.

    Page 407 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumBents
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of bents defined in the bridge object.

    Field: NumHinges
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of hinges defined in the bridge object.

    Field: NumTendons
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of prestress tendons defined in the bridge object.

    Field: NumGroups
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of bridge groups defined in the bridge object.

    Field: SuperElev
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if super elevation is defined in the bridge object. Otherwise it is No.
    Table: Bridge Object Definitions 02 - Reference Line

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object.
    Page 408 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    A station along the bridge, that is, a station along the layout line specified for the bridge.

    Field: Length
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The span length from the last station to the current station.

    Field: SpanType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The description of the span length.
    Table: Bridge Object Definitions 03 - Spans 1 - General

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object.

    Field: BridgeSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge section assigned to the specified span.

    Field: Variation
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a variation is assigned to the span. Otherwise it is No.
    Page 409 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Bridge Object Definitions 04 - Spans 2 - Parametric Variations

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object.

    Field: SameAs
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is Yes if the variation is the same as that assigned to the span. Otherwise it is
    No.

    Field: DistOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The option of how the variation distance is measured.

    Field: Parameter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The parameter to which the variation applies. The parameter items are typically consistent
    with the field names in the Bridge Section tables.

    Field: Variation
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge parametric variation.
    Table: Bridge Object Definitions 05 - Spans 3 - User Variations

    Page 410 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object.

    Field: SameAs
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is Yes if the variation is the same as that assigned to the span. Otherwise it is
    No.

    Field: PolyType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Structural or Opening indicating the type of polygon to which the variation
    applies.

    Field: PolyNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of the polygon to which the variation applies.
    .

    Field: Point
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The point number of the point to which the variation applies in the considered polygon.
    Points are numbered consecutively starting from 1.

    Page 411 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XorY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either X or Y indicating the point coordinate direction to which the variation
    applies.

    Field: Variation
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge parametric variation.
    Table: Bridge Object Definitions 06 - Abutments

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Location
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Start or End indicating the abutment location along the brdige object.

    Field: BearingDir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The bearing direction of the abutment, that is the bearing of a line parallel to the abutment.
    In a valid bearing the first character is either N or S and the last character is either E or W.
    N, S, E and W signify North, South, East and West respectively.
    The second through second-to-last characters specify an angle between 0 and 90 degrees,
    inclusive. The angle is specified as an integer number of degrees followed by an integer
    number of minutes followed by a real number of seconds.
    The minutes and the seconds must each be less than 60. The degrees can not exceed 90,
    and, if either the minutes or seconds is nonzero then the degrees can not exceed 89.
    Examples of valid bearings are N624329E, N62*43'29"E, N62E, S070403W,
    S07*04'03"W, S7*4'3"W, S7W, S074W, S07043W, N243627.25W, and N24*36'27.25"W.
    Page 412 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Bearings can also be specified as Default or DefaultX where x is a positive or negative


    number indicating the angle in degrees that the bearing is different from the default
    bearing.

    Field: DiaphProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None (meaning no diaphragm exists at the abutment) or the name of a
    defined bridge diaphragm property.

    Field: IntDiaph
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Steel U-Girder interior diaphragm. This is either None (meaning no diaphragm exists at
    the abutment) or the name of a defined bridge diaphragm property.

    Field: SubType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None, Abutment or Bent indicating the abutment substructure type.
    None means there is no substructure at the abutment. Abutment means an abutment
    property is used to define the substructure and Bent means an abutment property is used to
    define the substructure.

    Field: AbutProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies when the SubType item is Abutment. It is the name of the
    abutment property used to define the abutment substructure.

    Field: BentProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies when the SubType item is Bent. It is the name of the bent property
    used to define the abutment substructure.

    Page 413 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SubElev
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This is the Global Z elevation of the top of the abutment substructure.
    This item does not apply when the SubType item is None.

    Field: HorizOff
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The horizontal offset from the layout line to the midlength of the substructure
    This item does not apply when the SubType item is None.

    Field: BearProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is the name of a defined bridge bearing property that is used as a bearing at each
    girder. This item does not apply when the SubType item is None.

    Field: BearResProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined bridge restrainer property that is located at the
    bearing. This item does not apply when the SubType item is None.

    Field: BearElev
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length

    This item does not apply when the SubType item is None.

    Page 414 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BearAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    This is the rotation angle in degrees of the bearing local 3 axis from its default orientation
    that is parallel to the layout line.
    This item does not apply when the SubType item is None.

    Field: NumBearU
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of bearings for a steel U-girder. This may be either 1 or 2. For 1, the bearing
    is located at the shear center of the girder. For 2, the bearings are symmetrically located
    with respect to the webs as specified by item OffsetU. This item only applies when item
    BearAssign is Girder-by-Girder. A value of 1 is always used if the girder is not a steel U.
    Table: Bridge Object Definitions 07 - Bents

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object with which the bent is associated.

    Field: BentProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a bridge bent property.

    Field: Continuous
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This is either Yes or No indicating if the superstructure is continuous at the bent location.

    Page 415 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    This item is only imported when the BentProp item is None.

    Field: BearingDir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The bearing of the bent, that is the bearing of a line parallel to the bent.
    In a valid bearing the first character is either N or S and the last character is either E or W.
    N, S, E and W signify North, South, East and West respectively.
    The second through second-to-last characters specify an angle between 0 and 90 degrees,
    inclusive. The angle is specified as an integer number of degrees followed by an integer
    number of minutes followed by a real number of seconds.
    The minutes and the seconds must each be less than 60. The degrees can not exceed 90,
    and, if either the minutes or seconds is nonzero then the degrees can not exceed 89.
    Examples of valid bearings are N624329E, N62*43'29"E, N62E, S070403W,
    S07*04'03"W, S7*4'3"W, S7W, S074W, S07043W, N243627.25W, and N24*36'27.25"W.
    Bearings can also be specified as Default or DefaultX where x is a positive or negative
    number indicating the angle in degrees that the bearing is different from the default
    bearing.

    Field: BentElev
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This is the Global Z elevation of the top of the bent.This item does not apply when the
    BentProp item is None.

    Field: HorizOff
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The horizontal offset from the layout line to the midlength of the bent cap beam
    This item does not apply when the BentProp item is None.

    Field: DiaphBefore
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined bridge diaphragm property. If the BentProp
    item is None or the specified bent property has a single line of bearings (continuous
    Page 416 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    superstructure), then this is the property of the diaphragm, if any, that occurs at the bent. If
    the specified bent property has a double line of bearings (discontinuous superstructure),
    then this is the property of the diaphragm, if any, that occurs just before the bent.

    Field: IntDiaphBef
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Steel U-Girder interior diaphragm. This is either None or the name of a defined bridge
    diaphragm property. If the BentProp item is None or the specified bent property has a
    single line of bearings (continuous superstructure), then this is the property of the
    diaphragm, if any, that occurs at the bent. If the specified bent property has a double line
    of bearings (discontinuous superstructure), then this is the property of the diaphragm, if
    any, that occurs just before the bent.

    Field: DiaphAfter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined bridge diaphragm property. This item only
    applies when the bent property specified by the BentProp item has a double line of
    bearings (discontinuous superstructure), or when the bent property specified by the
    BentProp item is None and a discontinuous superstructure at the bent is specified. It is the
    property of the diaphragm, if any, that occurs just after the bent.

    Field: IntDiaphAft
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Steel U-Girder interior diaphragm. This is either None or the name of a defined bridge
    diaphragm property. This item only applies when the bent property specified by the
    BentProp item has a double line of bearings (discontinuous superstructure), or when the
    bent property specified by the BentProp item is None and a discontinuous superstructure
    at the bent is specified. It is the property of the diaphragm, if any, that occurs just after the
    bent.

    Field: ResPropSS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined bridge restrainer property that is used in the
    superstructure at each girder. This item only applies when the bent property specified by
    the BentProp item has a double line of bearings (discontinuous superstructure), or when
    the bent property specified by the BentProp item is None and a discontinuous
    superstructure at the bent is specified.
    Page 417 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ResElevSS
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This is the Global Z elevation of the superstructure restrainers. This item only applies
    when the bent property specified by the BentProp item has a double line of bearings
    (discontinuous superstructure), or when the bent property specified by the BentProp item
    is None and a discontinuous superstructure at the bent is specified.

    Field: MeshAtBent
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the bridge deck is to be meshed at the bent. It is No if the bridge deck it
    meshed at its default location not considering the bent.

    Field: BearProp1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is the name of a defined bridge bearing property that is used as a bearing at each
    girder.
    If the BentProp item is None then this item only applies when a discontinuous
    superstructure at the bent is specified and it is the hinge bearing property at the disconuity.
    If the specified bent property has a single line of bearings (continuous superstructure),
    then this is the property of the bearings along that line. If the specified bent property has a
    double line of bearings (discontinuous superstructure), then this is the property of the
    bearings along the bearing line just before the bent.

    Field: BrResProp1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined bridge restrainer property that is used at the
    same location as the BearProp1 item at each girder. This item does not apply when the
    BentProp item is None.

    Field: BearElev1
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length

    Page 418 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    If the BentProp item is None then this item only applies when a discontinuous
    superstructure at the bent is specified. If the specified bent property has a single line of
    bearings (continuous superstructure), then this is the elevation of the bearings along that
    line. If the specified bent property has a double line of bearings (discontinuous
    superstructure), then this is the elevation of the bearings along the bearing line just before
    the bent.

    Field: BearAngle1
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    This is the rotation angle in degrees of the bearing local 3 axis from its default orientation
    that is parallel to the layout line.
    If the BentProp item is None then this item only applies when a discontinuous
    superstructure at the bent is specified. If the specified bent property has a single line of
    bearings (continuous superstructure), then this is the rotation angle of the bearings along
    that line. If the specified bent property has a double line of bearings (discontinuous
    superstructure), then this is the rotation angle of the bearings along the bearing line just
    before the bent.

    Field: NumBearU1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of bearings for a steel U-girder. This may be either 1 or 2. For 1, the bearing
    is located at the shear center of the girder. For 2, the bearings are symmetrically located
    with respect to the webs as specified by item OffsetU. This item only applies when item
    BearAssign is Girder-by-Girder. A value of 1 is always used if the girder is not a steel U.
    This is for the property of the bearings along the bearing line just before the bent.

    Field: BearProp2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is the name of a defined bridge bearing property that is used as a bearing at each
    girder.
    This item does not apply when the BentProp item is None. This item only applies when
    the bent property specified by the BentProp has a double line of bearings (discontinuous
    superstructure). It is the property of the bearings along the bearing line just after the bent.

    Page 419 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BrResProp2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined bridge restrainer property that is used at the
    same location as the BearProp2 item at each girder.This item does not apply when the
    BentProp item is None. This item only applies when the bent property specified by the
    BentProp has a double line of bearings (discontinuous superstructure).

    Field: BearElev2
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This is the Global Z elevation of the bearings.
    This item only applies when the bent property specified by the BentProp has a double line
    of bearings (discontinuous superstructure). It is the elevation of the bearings along the
    bearing line just after the bent.

    Field: BearAngle2
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    This is the rotation angle in degrees of the bearing local 3 axis from its default orientation
    that is parallel to the layout line.
    This item only applies when the bent property specified by the BentProp has a double line
    of bearings (discontinuous superstructure). It is the rotation angle of the bearings along
    the bearing line just after the bent.

    Field: NumBearU2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of bearings for a steel U-girder. This may be either 1 or 2. For 1, the bearing
    is located at the shear center of the girder. For 2, the bearings are symmetrically located
    with respect to the webs as specified by item OffsetU. This item only applies when item
    BearAssign is Girder-by-Girder. A value of 1 is always used if the girder is not a steel U.
    This is for the property of the bearings along the bearing line just after the bent.
    Table: Bridge Object Definitions 08 - Hinges

    Page 420 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object.

    Field: BearingDir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The bearing direction of the hinge, that is the bearing of a line parallel to the hinge.
    In a valid bearing the first character is either N or S and the last character is either E or W.
    N, S, E and W signify North, South, East and West respectively.
    The second through second-to-last characters specify an angle between 0 and 90 degrees,
    inclusive. The angle is specified as an integer number of degrees followed by an integer
    number of minutes followed by a real number of seconds.
    The minutes and the seconds must each be less than 60. The degrees can not exceed 90,
    and, if either the minutes or seconds is nonzero then the degrees can not exceed 89.
    Examples of valid bearings are N624329E, N62*43'29"E, N62E, S070403W,
    S07*04'03"W, S7*4'3"W, S7W, S074W, S07043W, N243627.25W, and N24*36'27.25"W.
    Bearings can also be specified as Default or DefaultX where x is a positive or negative
    number indicating the angle in degrees that the bearing is different from the default
    bearing.

    Field: HingeDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the specified span to the hinge location.

    Page 421 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BearProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined bridge bearing property that is used as a
    bearing at each girder.

    Field: BearResProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined bridge restrainer property that is used at the
    same location as the BearProp item at each girder.

    Field: BearElev
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This is the Global Z elevation of the bearings.

    Field: BearAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    This is the rotation angle in degrees of the bearing local 3 axis from its default orientation
    that is parallel to the layout line.

    Field: ResPropSS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined bridge restrainer property that is used in the
    superstructure at each girder.

    Field: ResElevSS
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This is the Global Z elevation of the superstructure restrainers.

    Page 422 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DiaphBefore
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined bridge diaphragm property.It is the property
    of the diaphragm, if any, that occurs just before the hinge.

    Field: DiaphAfter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined bridge diaphragm property. It is the property
    of the diaphragm, if any, that occurs just after the hinge.
    Table: Bridge Object Definitions 09 - Super Elevation 1 - General

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: IsConstant
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the superelevation of the bridge object along the specified bridge object
    is constant. Otherwise it is No.

    Field: SuperElev
    Field is Imported: Yes
    Format: Controlled by program
    Units: Percent
    The constant superelevation for the bridge object along the specified bridge object. This
    item only applies when the IsConstant item is Yes.
    Table: Bridge Object Definitions 10 - Super Elevation 2 - User

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 423 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    A station along the specified bridge object.

    Field: SuperElev
    Field is Imported: Yes
    Format: Controlled by program
    Units: Percent
    The superelevation for the bridge object at the specified station.
    Table: Bridge Object Definitions 11 - Prestress 1 - General

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the tendon.

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the load pattern to which the prestress loads for this tendon are applied.

    Field: StartSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span where the tendon starts.

    Page 424 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StartType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Start of Span or User Definition indicating the start location of the tendon in
    the start span. If this item is User Definition then the start location is specified by the
    StartDist item.

    Field: StartDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the specified span to the start of the tendon. This item only
    applies when the StartType item is User Definition.

    Field: EndSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span where the tendon ends.

    Field: EndType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either End of Span or User Definition indicating the end location of the tendon in
    the end span. If this item is User Definition then the end location is specified by the
    EndDist item.

    Field: EndDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the specified span to the end of the tendon. This item only
    applies when the EndType item is User Definition.

    Field: PreType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Prestress or Post Tension indicating the prestress type.

    Page 425 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JackFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Start, End or Both indicating where the jacking occurs.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the steel-type material property associated with the tendon.

    Field: TendonArea
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The cross-sectional area of the tendon.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Force or Stress indicating the type of tendon load specified.

    Field: Force
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The tendon force. This item only applies when the LoadType item is Force.

    Field: Stress
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The tendon stress. This item only applies when the LoadType item is Stress.

    Field: MaxDiscLen
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum discretization length for the prestress tendon.

    Page 426 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ModelAs
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Loads or Elements indicating how the prestress tendon is modeled in the
    analysis model.

    Field: Curvature
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The curvature coefficient used in calculating friction losses.

    Field: Wobble
    Field is Imported: Yes
    Format: 1/Length (Miscellaneous section of form)
    Units: 1/Length
    The wobble coefficient used in calculating the wobble (length) effect portion of the
    friction losses.

    Field: LossAnchor
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The slip distance when the tendon is anchored.

    Field: LossEShort
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The stress loss because of elastic shortening.
    When the tendoned is modeled using elements this loss is in addition to any loss
    calculated by analysis.

    Field: LossCreep
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The stress loss because of concrete creep.
    When the tendoned is modeled using elements this loss is in addition to any loss
    calculated by analysis.
    Page 427 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LossShrink
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The stress loss because of concrete shrinkage.
    When the tendoned is modeled using elements this loss is in addition to any loss
    calculated by analysis.

    Field: LossSRelax
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2

    When the tendoned is modeled using elements this loss is in addition to any loss
    calculated by analysis.

    Field: TendonObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the tendon object that was created by the program to represent the specified
    bridge tendon in the object based model. This item is only applicable when a linked
    bridge object exists. The user should not modify this item. It should always be set by the
    program.

    Field: DuctDiam
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the tendon duct. Zero means no duct exists.

    Field: BondType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Bonded or Unbonded indicating the tendon bonding type.
    Table: Bridge Object Definitions 12 - Prestress 2 - Vertical Layout

    Page 428 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the tendon.

    Field: SegType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The segment type for the specified segment of the tendon. This is one of the following:
    Start of Tendon
    Linear to End of Tendon
    Linear
    Parabola End Point and Initial Slope
    Parabola End Point and Final Slope
    Parabola Intermediate Point
    Parabola End Point
    Circle Intermediate Point
    Circle End Point.

    Field: TendonDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the tendon to the end of the specified tendon segment.

    Field: VertOff
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The vertical offset of the tendon from the bridge section reference point at the specified
    tendon distance.

    Page 429 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Slope
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The slope of the tendon at either the beginning (initial) of the tendon segment or the end
    (final) of the tendon segment, as specified by the SegType item.
    This item only applies when the SegType item is either Parabola End Point and Initial
    Slope Product of Inertia about 2-3 Parabola End Point and Final Slope.
    Table: Bridge Object Definitions 13 - Prestress 3 - Horizontal Layout

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the tendon.

    Field: SegType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The segment type for the specified segment of the tendon. This is one of the following:
    Start of Tendon
    Linear to End of Tendon
    Linear
    Parabola End Point and Initial Slope
    Parabola End Point and Final Slope
    Parabola Intermediate Point
    Parabola End Point
    Circle Intermediate Point
    Circle End Point.

    Field: TendonDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the tendon to the end of the specified tendon segment.
    Page 430 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HorizOff
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The horizontal offset of the tendon from the bridge section reference point at the specified
    tendon distance.

    Field: Slope
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The slope of the tendon at either the beginning (initial) of the tendon segment or the end
    (final) of the tendon segment, as specified by the SegType item.
    This item only applies when the SegType item is either Parabola End Point and Initial
    Slope Product of Inertia about 2-3 Parabola End Point and Final Slope.
    Table: Bridge Object Definitions 14 - Diaphragms

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object.

    Field: DiaphProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge diaphragm property.

    Field: DiaphDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the specified span to the diaphragm location.

    Page 431 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DiaphBrg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The bearing of the diaphragm, that is the bearing of a line parallel to the diaphragm.
    In a valid bearing the first character is either N or S and the last character is either E or W.
    N, S, E and W signify North, South, East and West respectively.
    The second through second-to-last characters specify an angle between 0 and 90 degrees,
    inclusive. The angle is specified as an integer number of degrees followed by an integer
    number of minutes followed by a real number of seconds.
    The minutes and the seconds must each be less than 60. The degrees can not exceed 90,
    and, if either the minutes or seconds is nonzero then the degrees can not exceed 89.
    Examples of valid bearings are N624329E, N62*43'29"E, N62E, S070403W,
    S07*04'03"W, S7*4'3"W, S7W, S074W, S07043W, N243627.25W, and N24*36'27.25"W.
    Bearings can also be specified as Default or DefaultX where x is a positive or negative
    number indicating the angle in degrees that the bearing is different from the default
    bearing.

    Field: DiaphLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The location of the diaphragm, For ""All Spaces"", the location is measured based on the
    layoutline, for ""Girder i-j"", the location is measured based on the girder 'i'.
    .
    Table: Bridge Object Definitions 15 - Update Data

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: MaxDiscDeck
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum discretized segment length for objects creating the deck span.

    Page 432 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxDiscBeam
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum discretized segment length for line objects (frames) creating the bent cap
    beams.

    Field: MaxDiscCol
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum discretized segment length for line objects (frames) creating the bent
    columns.

    Field: ModelType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Frame, Area or Solid indicating the type of object used to create the bridge
    deck.

    Field: MaxElmMesh
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum submesh size for elements of the bridge deck. This item only applies when
    either Area or Solid objects are used to create the deck span.
    Table: Bridge Object Definitions 16 - Discretization Points

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object.

    Page 433 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Distance
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the specified span to the discretization point location.

    Field: Bearing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The bearing of the mesh line across the bridge at the discretization point.
    In a valid bearing the first character is either N or S and the last character is either E or W.
    N, S, E and W signify North, South, East and West respectively.
    The second through second-to-last characters specify an angle between 0 and 90 degrees,
    inclusive. The angle is specified as an integer number of degrees followed by an integer
    number of minutes followed by a real number of seconds.
    The minutes and the seconds must each be less than 60. The degrees can not exceed 90,
    and, if either the minutes or seconds is nonzero then the degrees can not exceed 89.
    Examples of valid bearings are N624329E, N62*43'29"E, N62E, S070403W,
    S07*04'03"W, S7*4'3"W, S7W, S074W, S07043W, N243627.25W, and N24*36'27.25"W.
    Bearings can also be specified as Default or DefaultX where x is a positive or negative
    number indicating the angle in degrees that the bearing is different from the default
    bearing.
    Table: Bridge Object Definitions 17 - Abutment Overwrites

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Location
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Start or End indicating the abutment location to which the overwrites
    apply.

    Page 434 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number to which the overwrite applies.

    Field: BearProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This field is blank if there is no overwrite. Otherwise it is the name of a bridge bearing
    property.

    Field: BearPropU2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This field is blank if there is no overwrite. Otherwise it is the name of a bridge bearing
    property for the second bearing of the two-bearing steel U girder.

    Field: BearResProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This field is blank if there is no overwrite. Otherwise it is either None or the name of a
    defined bridge restrainer property that is located at the bearing.

    Field: BearElev
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This field is blank if there is no overwrite. Otherwise it is actual global Z elevation of the
    bearing.

    Field: BearAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    This field is blank if there is no overwrite. Otherwise it is the rotation angle in degrees of
    the bearing local 3 axis from its default orientation that is parallel to the layout line.

    Page 435 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FSProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This field is blank if there is no overwrite. Otherwise it is the name of a foundation
    spring. This overwrite only applies to discrete foundation springs; it does not apply under
    continuous beams.

    Field: NumBearU
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This field is blank if there is no overwrite. Otherwise it is the number of bearings for a
    steel U-girder. This may be either 1 or 2. For 1, the bearing is located at the shear center of
    the girder. For 2, the bearings are symmetrically located with respect to the webs as
    specified by item OffsetU. This item only applies when the bearing assignment type of the
    to-be-overwritten bearing is Girder-by-Girder. A value of 1 is always used if the girder is
    not a steel U.
    Table: Bridge Object Definitions 18 - Bent Bearing Overwrites

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object.

    Field: Location
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Before or After indicating the bearing line location to which the
    overwrites apply. Before applies at bents with both 1 and 2 bearing lines. After only
    applies at bents with 1 line.
    Use Before at bents with one bearing line.

    Page 436 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number to which the overwrite applies.

    Field: BearProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This field is blank if there is no overwrite. Otherwise it is the name of a bridge bearing
    property.

    Field: BearPropU2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This field is blank if there is no overwrite. Otherwise it is the name of a bridge bearing
    property for the second bearing of the two-bearing steel U girder.

    Field: BearResProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This field is blank if there is no overwrite. Otherwise it is either None or the name of a
    defined bridge restrainer property that is located at the bearing.

    Field: BearElev
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This field is blank if there is no overwrite. Otherwise it is actual global Z elevation of the
    bearing.

    Field: BearAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    This field is blank if there is no overwrite. Otherwise it is the rotation angle in degrees of
    the bearing local 3 axis from its default orientation that is parallel to the layout line.

    Page 437 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumBearU
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This field is blank if there is no overwrite. Otherwise it is the number of bearings for a
    steel U-girder. This may be either 1 or 2. For 1, the bearing is located at the shear center of
    the girder. For 2, the bearings are symmetrically located with respect to the webs as
    specified by item OffsetU. This item only applies when the bearing assignment type of the
    to-be-overwritten bearing is Girder-by-Girder. A value of 1 is always used if the girder is
    not a steel U.
    Table: Bridge Object Definitions 19 - Bent Superstructure Overwrites

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object.

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number to which the overwrite applies.

    Field: ResPropSS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This field is blank if there is no overwrite. Otherwise it is either None or the name of a
    defined bridge restrainer property.

    Field: ResElevSS
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This field is blank if there is no overwrite. Otherwise it is actual global Z elevation of the
    restrainer.
    Page 438 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Bridge Object Definitions 20 - Hinge Overwrites

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object.

    Field: HingeDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the considered span to the considered hinge.

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number to which the overwrite applies.

    Field: BearProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This field is blank if there is no overwrite. Otherwise it is the name of a bridge bearing
    property.

    Field: BearResProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This field is blank if there is no overwrite. Otherwise it is either None or the name of a
    defined bridge restrainer property that is located at the bearing.

    Page 439 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BearElev
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This field is blank if there is no overwrite. Otherwise it is actual global Z elevation of the
    bearing.

    Field: BearAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    This field is blank if there is no overwrite. Otherwise it is the rotation angle in degrees of
    the bearing local 3 axis from its default orientation that is parallel to the layout line.

    Field: ResPropSS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This field is blank if there is no overwrite. Otherwise it is either None or the name of a
    defined bridge restrainer property.

    Field: ResElevSS
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This field is blank if there is no overwrite. Otherwise it is actual global Z elevation of the
    restrainer.
    Table: Bridge Object Definitions 21 - Temperature Loads

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object.

    Page 440 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the load pattern to which the specified temperature load is applied.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Uniform or Gradient indicating the type of temperature load.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature Change (Forces section of form)
    Units: Temp
    The uniform temperature change for the temperature load. This item only applies when
    the Type item is Uniform.

    Field: TempGrad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the Bridge Temperature Gradient Definition for the temperature load. This
    item only applies when the Type item is Gradient.

    Field: TempType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Positive or Negative indicating the type of temperature gradient assigned.
    This item only applies when the Type item is Gradient.
    Table: Bridge Object Definitions 22 - Girder Rebar 1 - General

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 441 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: TransvMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Transverse shear rebar material.

    Field: LongitMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Longitudinal rebar material.
    Table: Bridge Object Definitions 23 - Girder Rebar 2 - Transverse

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object.

    Field: Position
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The position of the specified rebar region.

    Page 442 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: RebarID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: NumBars
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Number of the rebars.

    Field: Spacing
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Spacing of the transverse rebars.

    Field: NumSpaces
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Number of spaces.
    Table: Bridge Object Definitions 24 - Girder Rebar 3 - Longitudinal

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 443 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: RebarID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: NumBars
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Number of the rebars.

    Field: RefLine
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: DistBefore
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the reference line toward the beginning of the bridge.
    Negative value represents the distance in the opposite side of the refenence line.

    Field: DistAfter
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the reference line toward the end of the bridge. Negative
    value represents the distance in the opposite side of the refenence line.

    Page 444 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DistVert
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The vertical distance of the longitudinal rebars either from top of bottom of the bridge
    section.

    Field: From
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    To indicate that the vertical distance is measured from top or bottom of the bridge section.
    Table: Bridge Object Definitions 25 - Point Loads

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Bridge Point Load Definition.

    Field: Station
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station along the layout line at which the first point load is located.

    Page 445 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Spacing
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The spacing of point loads measured along the layout line. This item only applies when
    the Number item is greater than 1.

    Field: Number
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of point loads applied. If this is greater than 1 then te point loads are applied
    at a spacing along the layout lint specified by the Spacing item.

    Field: Variation
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined parametric variation. It is the variation of the
    transverse location of the point load from the location specified in the Bridge Point Load
    Definition.
    Table: Bridge Object Definitions 26 - Line Loads

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Bridge Point Load Definition.

    Page 446 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StartSta
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The start station for the line load.

    Field: EndSta
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The start station for the line load. This should be larger than the start station.

    Field: Variation
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined parametric variation. It is the variation of the
    transverse location of the line load from the location specified in the Bridge Line Load
    Definition.
    Table: Bridge Object Definitions 27 - Area Loads

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Bridge Point Load Definition.

    Page 447 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StartSta
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The start station for the area load.

    Field: EndSta
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The start station for the area load. This should be larger than the start station.

    Field: VariationL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined parametric variation. It is the variation of the
    transverse location of the left edge of the area load from the location specified in the
    Bridge Area Load Definition.

    Field: VariationR
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined parametric variation. It is the variation of the
    transverse location of the right edge of the area load from the location specified in the
    Bridge Area Load Definition.
    Table: Bridge Parametric Variation Definitions

    Field: Variation
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge parametric variation.

    Field: PointNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The point number specified in the current record.

    Page 448 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SegType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is one of the following indicating the segment type and point type:
    Variation,
    Linear to End of Variation,
    Linear,
    Parabola Intermediate Point,
    Parabola End Point,
    Parabola End Point and Initial Slope,
    Parabola End Point and Final Slope,
    Circular Arc Intermediate Point,
    Circular Arc End Point,
    Circular Arc End Point and Initial Slope,
    Circular Arc End Point and Final Slope.

    Start of

    Field: Distance
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the start of a bridge span.

    Field: DimChange
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The dimension change at the current distance.

    Field: Slope
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The slope at the current distance. This item only applies when the SegType item is one of
    the following:
    Parabola End Point and Initial Slope,
    Parabola End Point and Final Slope,
    Circular Arc End Point and Initial Slope,
    Circular Arc End Point and Final Slope.
    Table: Bridge Preferences

    Page 449 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NorthAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle in degrees measured counterclockwise from the positive global X axis to the
    North direction.

    Field: MaxDiscCurv
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    For curves in the layout line the maximum discretization angle in degrees.
    Table: Bridge Response

    Field: Displs
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the group chosen for displacement output for all moving load load cases. If
    no output is specified then this item is None.

    Field: Reactions
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the group chosen for joint reaction output for all moving load load cases. If
    no output is specified then this item is None.

    Field: Frames
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the group chosen for frame force output for all moving load load cases. If no
    output is specified then this item is None.

    Field: ShellRes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the group chosen for shell resultant output for all moving load load cases. If
    no output is specified then this item is None.

    Page 450 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ShellStr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the group chosen for shell stress output for all moving load load cases. If no
    output is specified then this item is None.

    Field: PlnAsoStr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the group chosen for plane and asolid stress output for all moving load load
    cases. If no output is specified then this item is None.

    Field: SolidStr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the group chosen for solid stress output for all moving load load cases. If no
    output is specified then this item is None.

    Field: LinkFD
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the group chosen for link force and deformation output for all moving load
    load cases. If no output is specified then this item is None.

    Field: DisplsC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if corresponding values are calculated for Otherwise it is No.
    displacements.

    Field: ReactionsC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if corresponding values are calculated for Otherwise it is No. reactions.

    Page 451 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FramesC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if corresponding values are calculated for Otherwise it is No. frame
    forces.

    Field: ShellResC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if corresponding values are calculated for Otherwise it is No. shell
    resultants.

    Field: ShellStrC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if corresponding values are calculated for Otherwise it is No. shell
    stresses.

    Field: PlnAsoStrC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if corresponding values are calculated for Otherwise it is No. plane and
    asolid stresses.

    Field: SolidStrC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if corresponding values are calculated for Otherwise it is No. solid
    stresses.

    Field: LinkFDC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if corresponding values are calculated for Otherwise it is No. link forces
    and deformations.

    Page 452 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SectCut
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if section cut forces are recovered, otherwise it is No.

    Field: CalcMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Exact or it is a positive integer. A positive integermeans that the Quick
    calculation method is used, and the integer specifies the refinement level.

    Field: AllowReduce
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item applies to all vehicles. It is Yes if the load from a vehicle is allowed to reduce
    the severity of the response. Otherwise it is No.
    The default and recommended value is No.
    Table: Bridge Restrainer Definitions

    Field: Restrainer
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge restrainer property.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The item is either Link or User indicating how the restrainer properties are specified. Link
    means that the properties are described by specifying a link property. User means that the
    restrainer length, area, modulus of elasticity and slack length is specified.

    Field: LinkProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property. This item only applies if the Type item is Link.

    Page 453 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Length
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The length of the restrainer. This item only applies if the Type item is User.

    Field: Area
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The cross sectional area of the restrainer. This item only applies if the Type item is User.

    Field: E
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The modulus of elasticity of the restrainer. This item only applies if the Type item is User.

    Field: Slack
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The slack length of the restrainer. This item only applies if the Type item is User.
    This is the distance the structure moves before the slack, if any, is removed from the
    restrainer.
    Table: Bridge Section Cuts 01 - General

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SectCutNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The unique number of a program-generated bridge object section cut.

    Page 454 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Distance
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the bridge object to the section cut location.

    Field: LocType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Before or After indicating the section cut is either just before or just after the
    specified distance.

    Field: IsHinge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This is Yes if a hinge occurs at the specified distance. Otherwise it is No.

    Field: XGlobal
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global X coordinate of the section cut output point for the entire bridge section.

    Field: YGlobal
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Y coordinate of the section cut output point for the entire bridge section.

    Field: ZGlobal
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Z coordinate of the section cut output point for the entire bridge section.

    Page 455 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the frame section property associated with the section cut for the entire
    bridge section.

    Field: Xcg
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The X coordinate of the section center of gravity in the bridge section local coordinate
    system.

    Field: Ycg
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of the section center of gravity in the bridge section local coordinate
    system.

    Field: NumGirders
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of girders for which force output data is provided. Note that for spine model
    bridges this item is always zero.

    Field: DirCosX1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The direction cosine for the section-cut local 1 axis relative to the Global X axis. The local
    1 axis is tangential to the layout line used for the bridge object where the layout line
    intersects the section cut, and points in the up-station direction.

    Field: DirCosX2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The direction cosine for the section-cut local 2 axis relative to the Global X axis. The local
    2 axis is normal to the layout line used for the bridge object where the layout line

    Page 456 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    intersects the section cut. It is also normal to the bridge deck (with super-elevation) at the
    layout line, and points in the upward direction.

    Field: DirCosX3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The direction cosine for the section-cut local 3 axis relative to the Global X axis. The local
    3 axis is normal to the local 1 and 2 axes, following the right-hand rule. It lies in the plane
    of the deck (with super-elevation), and points toward the right edge of deck.

    Field: DirCosY1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The direction cosine for the section-cut local 1 axis relative to the Global Y axis. The local
    1 axis is tangential to the layout line used for the bridge object where the layout line
    intersects the section cut, and points in the up-station direction.

    Field: DirCosY2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The direction cosine for the section-cut local 2 axis relative to the Global Y axis. The local
    2 axis is normal to the layout line used for the bridge object where the layout line
    intersects the section cut. It is also normal to the bridge deck (with super-elevation) at the
    layout line, and points in the upward direction.

    Field: DirCosY3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The direction cosine for the section-cut local 3 axis relative to the Global Y axis. The local
    3 axis is normal to the local 1 and 2 axes, following the right-hand rule. It lies in the plane
    of the deck (with super-elevation), and points toward the right edge of deck.

    Field: DirCosZ1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The direction cosine for the section-cut local 1 axis relative to the Global Z axis. The local
    1 axis is tangential to the layout line used for the bridge object where the layout line
    intersects the section cut, and points in the up-station direction.

    Page 457 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DirCosZ2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The direction cosine for the section-cut local 2 axis relative to the Global Z axis. The local
    2 axis is normal to the layout line used for the bridge object where the layout line
    intersects the section cut. It is also normal to the bridge deck (with super-elevation) at the
    layout line, and points in the upward direction.

    Field: DirCosZ3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The direction cosine for the section-cut local 3 axis relative to the Global Z axis. The local
    3 axis is normal to the local 1 and 2 axes, following the right-hand rule. It lies in the plane
    of the deck (with super-elevation), and points toward the right edge of deck.
    Table: Bridge Section Cuts 02 - Groups

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SectCutNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The unique number of a program-generated bridge object section cut.

    Field: ObjectType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Point, Line, Area, Solid or Link indicating the type of object specified.

    Field: ObjectName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a point, line, area, solid or link object.
    Table: Bridge Section Cuts 03 - Stress Points

    Page 458 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SectCutNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The unique number of a program-generated bridge object section cut.

    Field: PointLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Top Left, Top Center, Top Right, Bottom Left, Bottom Center, or Bottom
    Right indicating the location of the considered stress point.

    Field: X
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The X coordinate of the stress point in the bridge section local coordinate system.

    Field: Y
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of the stress point in the bridge section local coordinate system.

    Field: ERatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the modulus of elasticity of the bridge section base material divided by the
    modulus of elasticity of the bridge section material at the stress point.
    Table: Bridge Section Cuts 04 - Girder Data - General

    Page 459 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SectCutNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The unique number of a program-generated bridge object section cut.

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: SpanDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along this girder to the section cut, measured from the beginning of the span
    that contains the section cut.

    Field: XGlobal
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global X coordinate of the girder section cut output point.

    Field: YGlobal
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Y coordinate of the girder section cut output point.

    Page 460 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ZGlobal
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Z coordinate of the girder section cut output point.
    Table: Bridge Section Cuts 05 - Girder Data - Groups

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SectCutNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The unique number of a program-generated bridge object section cut.

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: ObjectType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Point, Line, Area, Solid or Link indicating the type of object specified.

    Field: ObjectName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a point, line, area, solid or link object.
    Table: Bridge Group Definition 01 - General

    Page 461 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Field: GroupType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The Bridge Group types: Section, Top Slab, Web, Beam, Bottom Slab, Diaph/Crossframe,
    Support Bearing, Support Structure, Tendon and Mixed.

    Field: GenGroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the program generated general group based on the defined bridge group.
    Table: Bridge Group Definition 02 - Section

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Page 462 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeginSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the beginning of the group
    range.

    Field: BeginDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the layout line measured from the beginning of the BeginSpan.

    Field: EndSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the end of the group range.

    Field: EndDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the layout line measured from the beginning of the EndSpan.
    Table: Bridge Group Definition 03 - Top Slab

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Page 463 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The bridge group range in bridge section transverse direction.

    Field: BeginSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the beginning of the group
    range.

    Field: BeginDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the layout line measured from the beginning of the BeginSpan.

    Field: EndSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the end of the group range.

    Field: EndDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the layout line measured from the beginning of the EndSpan.
    Table: Bridge Group Definition 04 - Web

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Page 464 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Field: BeginSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the beginning of the group
    range.

    Field: BeginDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the layout line measured from the beginning of the BeginSpan.

    Field: EndSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the end of the group range.

    Field: EndDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the layout line measured from the beginning of the EndSpan.
    Table: Bridge Group Definition 05 - Beam

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Page 465 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Field: Location
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The bridge group range in bridge section transverse direction.

    Field: BeginSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the beginning of the group
    range.

    Field: BeginDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the layout line measured from the beginning of the BeginSpan.

    Field: EndSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the end of the group range.

    Field: EndDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the layout line measured from the beginning of the EndSpan.
    Table: Bridge Group Definition 06 - Bottom Slab

    Page 466 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Field: BeginSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the beginning of the group
    range.

    Field: BeginDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the layout line measured from the beginning of the BeginSpan.

    Field: EndSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the end of the group range.

    Field: EndDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the layout line measured from the beginning of the EndSpan.
    Table: Bridge Group Definition 07 - Diaphragm

    Page 467 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Field: Location
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The bridge group range in bridge section transverse direction.

    Field: BeginSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the beginning of the group
    range.

    Field: BeginDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    For the location = All Spaces, the distance is along the layout line measured from the
    beginning of the BeginSpan; For the staggered diaphragms, the distance is girder length
    measured from the beginning of the BeginSpan.

    Field: EndSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the end of the group range.

    Page 468 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EndDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    For the location = All Spaces, the distance is along the layout line measured from the
    beginning of the EndSpan; For the location = individual girder spaces, the distance is
    girder length measured from the beginning of the EndSpan.
    Table: Bridge Group Definition 08 - Support Structure

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Field: SuppLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Bridge bent structure components, including cap beam and individual column.
    Table: Bridge Group Definition 09 - Bearing - Support

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Page 469 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Field: LongitLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The support location at the end of specified span name.

    Field: TransvLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The girder number that indicates the restrainer location in bridge section transverse
    direction.

    Field: Position
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Bearing position for double bearing bent, either Before or After.
    Table: Bridge Group Definition 10 - Bearing - Hinge

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Page 470 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object with which the in-span hinge is
    associated.

    Field: TransvLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The girder number that indicates the restrainer location in bridge section transverse
    direction.

    Field: HingeDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the specified span to the hinge location.
    Table: Bridge Group Definition 11 - Restrainer - Support

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Field: LongitLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The support location at the end of specified span name.

    Page 471 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TransvLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The girder number that indicates the bearing location in bridge section transverse
    direction.

    Field: Position
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Restrainer position, can be Bearing, Bearing Before, Bearing After and Superstructure.
    Table: Bridge Group Definition 12 - Restrainer - Hinge

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Field: SpanName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a span in the specified bridge object with which the in-span hinge is
    associated.

    Field: TransvLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The girder number that indicates the bearing location in bridge section transverse
    direction.

    Page 472 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Position
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Restrainer position, can be Bearing, Bearing Before, Bearing After and Superstructure.

    Field: HingeDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the specified span to the hinge location.
    Table: Bridge Group Definition 13 - Tendon

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Field: TendonName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.
    Table: Bridge Group Definition 14 - Mixed

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined bridge object.

    Page 473 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge group.

    Field: BeginSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the beginning of the group
    range.

    Field: BeginDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the layout line measured from the beginning of the BeginSpan.

    Field: EndSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object associated with the end of the group range.

    Field: EndDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the layout line measured from the beginning of the EndSpan.

    Field: Deck
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then deck (top slab) objects are included in the group if they fall
    between the start and end stations.

    Page 474 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girders
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then girder objects are included in the group if they fall between the start
    and end stations.

    Field: BotSlab
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then bottom slab objects, if any, are included in the group if they fall
    between the start and end stations.

    Field: Diaphragms
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then diaphragm objects, if any, are included in the group if they fall
    between the start and end stations.

    Field: Hinges
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then hinge objects, if any, are included in the group if they fall between
    the start and end stations.

    Field: AbutBears
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then abutment bearing objects, if any, are included in the group if they
    fall between the start and end stations.

    Field: BentCols
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then bent column objects, if any, are included in the group if they fall
    between the start and end stations.

    Page 475 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BentBeams
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then bent cap beam objects, if any, are included in the group if they fall
    between the start and end stations.

    Field: BentBears
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then bent bearing objects, if any, are included in the group if they fall
    between the start and end stations.

    Field: Tendons
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then tendon objects, if any, are included in the group if they fall between
    the start and end stations.
    Table: Bridge Section Definitions 02 - Concrete Box Girder

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: ExtGirdType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the box girder exterior girder type: Vertical,
    Sloped, Clipped, Radius, MaxSloped and AASHTO-PCI-ASBI.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property associated with the bridge section.

    Page 476 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumIntGird
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of interior girders in the bridge section.

    Field: TotalWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total width of the top slab of the bridge section.

    Field: TotalDepth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total depth of the bridge section.

    Field: ExtGRadClip
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item is the exterior girder radius or clip. It applies when the ExtGirdType item is
    Sloped, Radius, MaxSloped or AASHTO-PCI-ASBI.
    For an ExtGirdType of Sloped or MaxSloped or AASHTO-PCI-ASBI it is the horizontal
    distance from the outside face of the exterior girder just below the top slab to the outside
    face of the exterior girder at the bottom of the section.
    For an ExtGirdType of Radius it is the radius at the bottom of the exterior girder.
    When the ExtGirdType item is Sloped this item only applies to the left side of the box
    girder. In all other cases it applies to each side of the box girder.

    Field: ExtGClip2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the ExtGirdType item is Sloped. It is the horizontal distance
    from the outside face of the right exterior girder just below the top slab to the outside face
    of the right exterior girder at the bottom of the section.
    .

    Page 477 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirdVert
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the girders in the section are to remain vertical in area and solid object
    models when the section is superelevated. Otherwise it is No.

    Field: TopSlabThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section top slab between the exterior girders (i.e., notincluding
    the overhangs).

    Field: BotSlabThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section bottom slab.

    Field: ExtGirdThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section exterior girders. For sections with sloped exterior
    girders this ismeasured parallel to the top deck surface.

    Field: IntGirdThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section interior girders.

    Field: LOLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the left side of the section.

    Page 478 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LOOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the left side of the section at theouter edge of
    the overhang.

    Field: ROLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the right side of the section.

    Field: ROOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the right side of the section at theouter edge of
    the overhang.

    Field: FHoriz1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f1.

    Field: FHoriz2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f2.

    Field: FHoriz3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f3.

    Page 479 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FHoriz4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f4.

    Field: FHoriz5
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f5.

    Field: FHoriz6
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f6.

    Field: FHoriz7
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f7.

    Field: FHoriz8
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f8.

    Field: FHoriz9
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f9.

    Field: FVert1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f1.

    Page 480 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FVert2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f2.

    Field: FVert3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f3.

    Field: FVert4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f4.

    Field: FVert5
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f5.

    Field: FVert6
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f6.

    Field: FVert7
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f7.

    Field: FVert8
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f8.

    Page 481 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FVert9
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f9.

    Field: CurbLeft
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the inside edge of the left live load
    curb.

    Field: CurbRight
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the right edge of the bridge deck to the inside edge of the right live load
    curb.

    Field: CurbMedian
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the centerline of the median live load
    curb.

    Field: CurbMWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the median live load curb.

    Field: RefPtOffX
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system X direction offset from the the bridge section
    reference point to the insertion point.

    Page 482 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RefPtOffY
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system Y direction offset from the the bridge section
    reference point to the insertion point.

    Field: DsgnTopDis
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the top of the bridge section to the horizontal cut line that defines the
    top slab area.

    Field: DsgnBotDis
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the bottom of the bridge section to the horizontal cut line that defines
    the bottom slab area.
    Table: Bridge Section Definitions 03 - Concrete Tee Beam

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property associated with the bridge section.

    Field: NumIntGird
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of interior girders in the bridge section.

    Page 483 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total width of the top slab of the bridge section.

    Field: TotalDepth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total depth of the bridge section.

    Field: GirdVert
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the girders in the section are to remain vertical in area and solid object
    models when the section is superelevated. Otherwise it is No.

    Field: TopSlabThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section top slab between the exterior girders (i.e., not
    including the overhangs).

    Field: ExtGDpAbvF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The depth of the bridge section exterior girder above the flare (measured from the bottom
    of the top slab to the top of the flare).

    Field: ExtGDpOfF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The depth of the bridge section exterior girder flare.

    Page 484 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ExtGThAbvF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section exterior girder above the flare.

    Field: ExtGThBlwF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section exterior girder below the flare.

    Field: IntGDpAbvF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The depth of the bridge section interior girder above the flare (measured from the bottom
    of the top slab to the top of the flare).

    Field: IntGDpOfF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The depth of the bridge section interior girder flare.

    Field: IntGThAbvF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section interior girder above the flare.

    Field: IntGThBlwF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section interior girder below the flare.

    Field: LOLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the left side of the section.
    Page 485 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LOOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the left side of the section at the outer edge of
    the overhang.

    Field: ROLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the right side of the section.

    Field: ROOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the right side of the section at the outer edge of
    the overhang.

    Field: FHoriz1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f1.

    Field: FHoriz2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f2.

    Field: FHoriz3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f3.

    Page 486 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FHoriz4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f4.

    Field: FVert1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f1.

    Field: FVert2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f2.

    Field: FVert3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f3.

    Field: FVert4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f4.

    Field: CurbLeft
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the inside edge of the left live load
    curb.

    Page 487 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CurbRight
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the right edge of the bridge deck to the inside edge of the right live load
    curb.

    Field: CurbMedian
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the centerline of the median live load
    curb.

    Field: CurbMWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the median live load curb.

    Field: RefPtOffX
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system X direction offset from the the bridge section
    reference point to the insertion point.

    Field: RefPtOffY
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system Y direction offset from the the bridge section
    reference point to the insertion point.
    Table: Bridge Section Definitions 04 - Concrete Flat Slab

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Page 488 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property associated with the bridge section.

    Field: NumIntGird
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: TotalWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total width of the top slab of the bridge section.

    Field: TotalDepth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total depth of the bridge section.

    Field: LOLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the left side of the section.

    Field: LOOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the left side of the section at the outer edge of
    the overhang.

    Field: ROLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the right side of the section.
    Page 489 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ROOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the right side of the section at the outer edge of
    the overhang.

    Field: FHoriz1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f1.

    Field: FHoriz2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f2.

    Field: CurbLeft
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the inside edge of the left live load
    curb.

    Field: CurbRight
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the right edge of the bridge deck to the inside edge of the right live load
    curb.

    Field: CurbMedian
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the centerline of the median live load
    curb.

    Page 490 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CurbMWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the median live load curb.

    Field: RefPtOffX
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system X direction offset from the the bridge section
    reference point to the insertion point.

    Field: RefPtOffY
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system Y direction offset from the the bridge section
    reference point to the insertion point.
    Table: Bridge Section Definitions 05 - Steel I Girders 1 - General

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property associated with the concrete deck of the bridge section.

    Field: NumIntGird
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of interior girders in the bridge section.

    Page 491 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total width of the top slab of the bridge section.

    Field: GirdLayout
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'Along Layout Line' or 'Straight' indicating how the girders are laid out. This
    options allows straight girders on a curved bridge.

    Field: DiffSpacing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the spacing between beams is not constant. It is No if all spaces
    between beams are the same.

    Field: DiffHaunch
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the concrete haunch height above the girder is not the same for all
    girders. Otherwise it is No.

    Field: DiffSection
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the frame section property is not the same for all girders. Otherwise it
    is No.

    Field: TopSlabThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section top slab (not including the overhangs).

    Page 492 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HaunchHSame
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the concrete haunch above the girder when all girders have the same
    concrete haunch height. This item only applies when the DiffHaunch item is No. If the
    DiffHaunch item is Yes then the haunch heights are provided in a separate table.

    Field: GirdSecSame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The girder frame section property when all girders have the same property. This item only
    applies when the DiffSection item is No. If the DiffSection item is Yes then the girder
    frame section properties are provided in a separate table.

    Field: GirdAreaObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the girders in area object models are to be modeled using area objects.
    This item is No if the girders in area object models are to be modeled using frame objects.

    Field: FlangeMesh
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the GirdAreaObj item is Yes. It is the maximum width of a
    meshed element in the girder flange.

    Field: WebMesh
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the GirdAreaObj item is Yes. It is the maximum height of a
    meshed element in the girder web.

    Field: LOLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the left side of the section.

    Page 493 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LOFillDist
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the center of the left exterior girder to fillet f1 on the left side of the
    section.

    Field: LOOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the left side of the section at the outer edge of
    the overhang.

    Field: ROLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the right side of the section.

    Field: ROFillDist
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the center of the right exterior girder to fillet f2 on the right side of the
    section.

    Field: ROOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the right side of the section at the outer edge of
    the overhang.

    Field: FHoriz1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f1.

    Page 494 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FHoriz2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f2.

    Field: CurbLeft
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the inside edge of the left live load
    curb.

    Field: CurbRight
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the right edge of the bridge deck to the inside edge of the right live load
    curb.

    Field: CurbMedian
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the centerline of the median live load
    curb.

    Field: CurbMWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the median live load curb.

    Field: RefPtOffX
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system X direction offset from the the bridge section
    reference point to the insertion point.

    Page 495 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RefPtOffY
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system Y direction offset from the the bridge section
    reference point to the insertion point.
    Table: Bridge Section Definitions 06 - Steel I Girders 2 - Spacing

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: SpaceNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder space number starting from the left side of the section.

    Field: Spacing
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The center of girder to center of girder distance for the specified space.
    Table: Bridge Section Definitions 07 - Steel I Girders 3 - Haunches

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Page 496 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HaunchHt
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the concrete haunch above the specified girder.
    Table: Bridge Section Definitions 08 - Steel I Girders 4 - Sections

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: GirderSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The frame section property for the specified girder.
    Table: Bridge Section Definitions 09 - PCC I Girders 1 - General

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property associated with the concrete deck of the bridge section.

    Page 497 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumIntGird
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of interior girders in the bridge section.

    Field: TotalWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total width of the top slab of the bridge section.

    Field: GirdLayout
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'Along Layout Line' or 'Straight' indicating how the girders are laid out. This
    options allows straight girders on a curved bridge.

    Field: DiffSpacing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the spacing between beams is not constant. It is No if all spaces
    between beams are the same.

    Field: DiffHaunch
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the concrete haunch height above the girder is not the same for all
    girders. Otherwise it is No.

    Field: DiffSection
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the frame section property is not the same for all girders. Otherwise it
    is No.

    Page 498 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TopSlabThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section top slab (not including the overhangs).

    Field: HaunchHSame
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the concrete haunch above the girder when all girders have the same
    concrete haunch height. This item only applies when the DiffHaunch item is No. If the
    DiffHaunch item is Yes then the haunch heights are provided in a separate table.

    Field: GirdSecSame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The girder frame section property when all girders have the same property. This item only
    applies when the DiffSection item is No. If the DiffSection item is Yes then the girder
    frame section properties are provided in a separate table.

    Field: LOLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the left side of the section.

    Field: LOFillDist
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the center of the left exterior girder to fillet f1 on the left side of the
    section.

    Field: LOOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the left side of the section at the outer edge of
    the overhang.

    Page 499 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ROLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the right side of the section.

    Field: ROFillDist
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the center of the right exterior girder to fillet f2 on the right side of the
    section.

    Field: ROOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the right side of the section at the outer edge of
    the overhang.

    Field: FHoriz1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f1.

    Field: FHoriz2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f2.

    Field: CurbLeft
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the inside edge of the left live load
    curb.

    Page 500 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CurbRight
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the right edge of the bridge deck to the inside edge of the right live load
    curb.

    Field: CurbMedian
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the centerline of the median live load
    curb.

    Field: CurbMWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the median live load curb.

    Field: RefPtOffX
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system X direction offset from the the bridge section
    reference point to the insertion point.

    Field: RefPtOffY
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system Y direction offset from the the bridge section
    reference point to the insertion point.
    Table: Bridge Section Definitions 10 - PCC I Girders 2 - Spacing

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Page 501 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SpaceNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder space number starting from the left side of the section.

    Field: Spacing
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The center of girder to center of girder distance for the specified space.
    Table: Bridge Section Definitions 11 - PCC I Girders 3 - Haunches

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: HaunchHt
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the concrete haunch above the specified girder.
    Table: Bridge Section Definitions 12 - PCC I Girders 4 - Sections

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Page 502 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: GirderSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The frame section property for the specified girder.
    Table: Bridge Section Definitions 13 - PCC U Girders 1 - General

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property associated with the concrete deck of the bridge section.

    Field: NumIntGird
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of interior girders in the bridge section.

    Field: TotalWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total width of the top slab of the bridge section.

    Page 503 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirdLayout
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'Along Layout Line' or 'Straight' indicating how the girders are laid out. This
    options allows straight girders on a curved bridge.

    Field: DiffSpacing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the spacing between beams is not constant. It is No if all spaces
    between beams are the same.

    Field: DiffHaunch
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the concrete haunch height above the girder is not the same for all
    girders. Otherwise it is No.

    Field: DiffSection
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the frame section property is not the same for all girders. Otherwise it
    is No.

    Field: TopSlabThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section top slab (not including the overhangs).

    Field: HaunchHSame
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the concrete haunch above the girder when all girders have the same
    concrete haunch height. This item only applies when the DiffHaunch item is No. If the
    DiffHaunch item is Yes then the haunch heights are provided in a separate table.

    Page 504 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirdSecSame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The girder frame section property when all girders have the same property. This item only
    applies when the DiffSection item is No. If the DiffSection item is Yes then the girder
    frame section properties are provided in a separate table.

    Field: GirdAreaObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the girders in area object models are to be modeled using area objects.
    This item is No if the girders in area object models are to be modeled using frame objects.

    Field: FlangeMesh
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the GirdAreaObj item is Yes. It is the maximum width of a
    meshed element in the girder flange.

    Field: WebMesh
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the GirdAreaObj item is Yes. It is the maximum height of a
    meshed element in the girder web.

    Field: LOLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the left side of the section.

    Field: LOFillDist
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the center of the left exterior girder to fillet f1 on the left side of the
    section.

    Page 505 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LOOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the left side of the section at the outer edge of
    the overhang.

    Field: ROLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the right side of the section.

    Field: ROFillDist
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the center of the right exterior girder to fillet f2 on the right side of the
    section.

    Field: ROOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the right side of the section at the outer edge of
    the overhang.

    Field: FHoriz1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f1.

    Field: FHoriz2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f2.

    Page 506 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CurbLeft
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the inside edge of the left live load
    curb.

    Field: CurbRight
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the right edge of the bridge deck to the inside edge of the right live load
    curb.

    Field: CurbMedian
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the centerline of the median live load
    curb.

    Field: CurbMWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the median live load curb.

    Field: RefPtOffX
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system X direction offset from the the bridge section
    reference point to the insertion point.

    Field: RefPtOffY
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system Y direction offset from the the bridge section
    reference point to the insertion point.
    Table: Bridge Section Definitions 14 - PCC U Girders 2 - Spacing

    Page 507 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: SpaceNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder space number starting from the left side of the section.

    Field: Spacing
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The center of girder to center of girder distance for the specified space.
    Table: Bridge Section Definitions 15 - PCC U Girders 3 - Haunches

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: HaunchHt
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the concrete haunch above the specified girder.
    Table: Bridge Section Definitions 16 - PCC U Girders 4 - Sections

    Page 508 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: GirderSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The frame section property for the specified girder.
    Table: Bridge Section Definitions 17 - Adv Box Gird 1 - General

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property associated with the bridge section.

    Field: NumIntGird
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of interior girders in the bridge section.

    Page 509 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total width of the top slab of the bridge section.

    Field: BaseDepth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The base depth of the bridge section.This depth does not include any specified vertical
    offsets defining depth variation across the bridge.

    Field: SpaceCon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The item is Yes if the girder spacing is constant. Otherwise it is No.

    Field: GirderCon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The item is Yes if the girder and fillet dimensions are constant. Otherwise it is No.

    Field: SlabCon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The item is Yes if the top and bootom slab thicknesses are constant in each space.
    Otherwise it is No.

    Field: DepthCon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The item is Yes if the bridge section depth is constant across its width. Otherwise it is No.

    Page 510 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirdVert
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the girders in the section are to remain vertical in area and solid object
    models when the section is superelevated. Otherwise it is No.

    Field: TopSlabThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section top slab (not including the overhangs or fillets). This
    item is only applicable when the SlabCon item is Yes.

    Field: BotSlabThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section bottom slab (not including the fillets). This item is
    only applicable when the SlabCon item is Yes.

    Field: GirderThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the girders. This item is only applicable when the GirderCon item is Yes.

    Field: ThetaLeft
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle from vertical of the left exterior girder.

    Field: ThetaRight
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle from vertical of the right exterior girder.

    Page 511 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IsRad11To14
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The item is Yes if a radius is specified for the outside top (fillets f11 thru f14) of the
    exterior girders. Otherwise it is No. This item is only applicable when the GirderCon
    item is Yes.

    Field: IsRad15To18
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The item is Yes if a radius is specified for the outside bottom (fillets f15 thru f18) of the
    exterior girders. Otherwise it is No. This item is only applicable when the GirderCon
    item is Yes.

    Field: IsRad7To10
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The item is Yes if a radius is specified for the inside bottom (fillets f7 thru f10) of the
    exterior girders. Otherwise it is No. This item is only applicable when the GirderCon
    item is Yes.

    Field: Rad11To14
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified radius for the outside top (fillets f11 thru f14) of the exterior girders. This
    item is only applicable when the GirderCon and IsRad11To14 items are Yes.

    Field: Rad15To18
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified radius for the outside bottom (fillets f15 thru f18) of the exterior girders.
    This item is only applicable when the GirderCon and IsRad15To18 items are Yes.

    Page 512 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Rad7To10
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified radius for the inside bottom (fillets f7 thru f10) of the exterior girders. This
    item is only applicable when the GirderCon and IsRad7To10 items are Yes.

    Field: FHoriz1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f1.This item is only applicable when the GirderCon item is
    Yes.

    Field: FHoriz2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f2.This item is only applicable when the GirderCon item is
    Yes.

    Field: FHoriz3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f3.This item is only applicable when the GirderCon item is
    Yes.

    Field: FHoriz4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f4.This item is only applicable when the GirderCon item is
    Yes.

    Field: FHoriz5
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f5.This item is only applicable when the GirderCon item is
    Yes.

    Page 513 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FHoriz6
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f6.This item is only applicable when the GirderCon item is
    Yes.

    Field: FHoriz7
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f7.This item is only applicable when the GirderCon item is
    Yes. When the IsRad7To10 item is Yes this item is output for information only and it is
    not imported.

    Field: FHoriz8
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f8.This item is only applicable when the GirderCon item is
    Yes. When the IsRad7To10 item is Yes this item is output for information only and it is
    not imported.

    Field: FHoriz9
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f9.This item is only applicable when the GirderCon item is
    Yes. When the IsRad7To10 item is Yes this item is output for information only and it is
    not imported.

    Field: FHoriz10
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f10.This item is only applicable when the GirderCon item is
    Yes. When the IsRad7To10 item is Yes this item is output for information only and it is
    not imported.

    Page 514 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FHoriz11
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f11.This item is only applicable when the GirderCon item is
    Yes. When the IsRad11To14 item is Yes this item is output for information only and it is
    not imported.

    Field: FHoriz12
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f12.This item is only applicable when the GirderCon item is
    Yes. When the IsRad11To14 item is Yes this item is output for information only and it is
    not imported.

    Field: FHoriz13
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f13.This item is only applicable when the GirderCon item is
    Yes. When the IsRad11To14 item is Yes this item is output for information only and it is
    not imported.

    Field: FHoriz14
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f14.This item is only applicable when the GirderCon item is
    Yes. When the IsRad11To14 item is Yes this item is output for information only and it is
    not imported.

    Field: FHoriz15
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f15.This item is only applicable when the GirderCon item is
    Yes. When the IsRad15To18 item is Yes this item is output for information only and it is
    not imported.

    Page 515 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FHoriz16
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f16.This item is only applicable when the GirderCon item is
    Yes. When the IsRad15To18 item is Yes this item is output for information only and it is
    not imported.

    Field: FHoriz17
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f17.This item is only applicable when the GirderCon item is
    Yes. When the IsRad15To18 item is Yes this item is output for information only and it is
    not imported.

    Field: FHoriz18
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f18.This item is only applicable when the GirderCon item is
    Yes. When the IsRad15To18 item is Yes this item is output for information only and it is
    not imported.

    Field: FVert1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f1.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: FVert2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f2.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4.

    Page 516 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FVert3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f3.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: FVert4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f4.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: FVert5
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f5.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: FVert6
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f6.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: FVert7
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f7.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: FVert8
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f8.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4.

    Page 517 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FVert9
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f9.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: FVert10
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f10.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: FVert11
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f11.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4. When the IsRad11To14 item
    is Yes this item is output for information only and it is not imported.

    Field: FVert12
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f12.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4. When the IsRad11To14 item
    is Yes this item is output for information only and it is not imported.

    Field: FVert13
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f13.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4. When the IsRad11To14 item
    is Yes this item is output for information only and it is not imported.

    Page 518 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FVert14
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f14.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4. When the IsRad11To14 item
    is Yes this item is output for information only and it is not imported.

    Field: FVert15
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f15.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4. When the IsRad15To18 item
    is Yes this item is output for information only and it is not imported.

    Field: FVert16
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f16.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4. When the IsRad15To18 item
    is Yes this item is output for information only and it is not imported.

    Field: FVert17
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f17.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4. When the IsRad15To18 item
    is Yes this item is output for information only and it is not imported.

    Field: FVert18
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f18.Limiting unbraced length to achieve the nominal flexural
    resistance under uniform bending 6.10.8.2.3.-4 or A6.3.3-4. When the IsRad15To18 item
    is Yes this item is output for information only and it is not imported.

    Page 519 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Offset1Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None, Slab Edge, Girder, or Space Center indicating the vertical offset
    location type. This item is only applicable when the DepthCon item is No.

    Field: Offset1Loc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the DepthCon item is No and the Offset1Type item is
    not None. The value for this item depends on what is specified for the Offset1Type item.
    When the Offset1Type item is Slab Edge then this item is either 1 or 2 where 1 specifies
    the left edge of the slab and two specifies the right edge.
    When the Offset1Type item is Girder then this item is the girder number counting from the
    left side of the section with the left exterior girder being grider number 1.
    When the Offset1Type item is Space Center then this item is the space number counting
    from the left side of the section.
    .

    Field: Offset1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The offset distance is added to the base depth to get the total section depth at the specified
    location.

    Field: Offset2Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None, Slab Edge, Girder, or Space Center indicating the vertical offset
    location type. This item is only applicable when the DepthCon item is No.

    Page 520 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Offset2Loc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the DepthCon item is No and the Offset2Type item is
    not None. The value for this item depends on what is specified for the Offset2Type item.
    When the Offset1Type item is Slab Edge then this item is either 1 or 2 where 1 specifies
    the left edge of the slab and two specifies the right edge.
    When the Offset1Type item is Girder then this item is the girder number counting from the
    left side of the section with the left exterior girder being grider number 1.
    When the Offset1Type item is Space Center then this item is the space number counting
    from the left side of the section.
    .

    Field: Offset2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The offset distance is added to the base depth to get the total section depth at the specified
    location.

    Field: LOLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the left side of the section.

    Field: LOOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the left side of the section at the outer edge of
    the overhang.

    Field: ROLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the right side of the section.

    Page 521 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ROOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the right side of the section at the outer edge of
    the overhang.

    Field: CurbLeft
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the inside edge of the left live load
    curb.

    Field: CurbRight
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the right edge of the bridge deck to the inside edge of the right live load
    curb.

    Field: CurbMedian
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the centerline of the median live load
    curb.

    Field: CurbMWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the median live load curb.

    Field: RefPtOffX
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system X direction offset from the the bridge section
    reference point to the insertion point.

    Page 522 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RefPtOffY
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system Y direction offset from the the bridge section
    reference point to the insertion point.

    Field: DsgnTopDis
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the top of the bridge section to the horizontal cut line that defines the
    top slab area.

    Field: DsgnBotDis
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the bottom of the bridge section to the horizontal cut line that defines
    the bottom slab area.
    Table: Bridge Section Definitions 18 - Adv Box Gird 2 - Girder Spacing

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: SpaceNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder space number starting from the left side of the section.

    Field: Spacing
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The center of girder to center of girder distance for the specified space.
    Table: Bridge Section Definitions 19 - Adv Box Gird 3 - Exterior Girder

    Page 523 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: GirderLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Left or Right indicating the location of the exterior girder in the bridge
    section.

    Field: GirderThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the specified girder.

    Field: IsRad11To14
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The item is Yes if a radius is specified for the outside top (fillets f11 thru f14) of the
    considered girder. Otherwise it is No.

    Field: IsRad15To18
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The item is Yes if a radius is specified for the outside bottom (fillets f15 thru f18) of the
    considered girder. Otherwise it is No.

    Field: IsRad7To10
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The item is Yes if a radius is specified for the inside bottom (fillets f7 thru f10) of the
    considered girder. Otherwise it is No.

    Page 524 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Rad11To14
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified radius for the outside top (fillets f11 thru f14) of the considered girder. This
    item is only applicable when the IsRad11To14 item is Yes.

    Field: Rad15To18
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified radius for the outside bottom (fillets f15 thru f18) of the considered girder.
    This item is only applicable when the IsRad15To18 item is Yes.

    Field: Rad7To10
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified radius for the inside bottom (fillets f7 thru f10) of the considered girder.
    This item is only applicable when the IsRad7To10 item is Yes.

    Field: FHoriz1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f1. This item only applies to right exterior girders.

    Field: FHoriz2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f2. This item only applies to right exterior girders.

    Field: FHoriz3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f3. This item only applies to left exterior girders.

    Page 525 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FHoriz4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f4. This item only applies to left exterior girders.

    Field: FHoriz7
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f7. When the IsRad7To10 item is Yes this item is output for
    information only and it is not imported.

    Field: FHoriz8
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f8. When the IsRad7To10 item is Yes this item is output for
    information only and it is not imported.

    Field: FHoriz9
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f9. When the IsRad7To10 item is Yes this item is output for
    information only and it is not imported.

    Field: FHoriz10
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f10. When the IsRad7To10 item is Yes this item is output
    for information only and it is not imported.

    Field: FHoriz11
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f11. When the IsRad11To14 item is Yes this item is output
    for information only and it is not imported.

    Page 526 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FHoriz12
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f12. When the IsRad11To14 item is Yes this item is output
    for information only and it is not imported.

    Field: FHoriz13
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f13. When the IsRad11To14 item is Yes this item is output
    for information only and it is not imported.

    Field: FHoriz14
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f14. When the IsRad11To14 item is Yes this item is output
    for information only and it is not imported.

    Field: FHoriz15
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f15. When the IsRad15To18 item is Yes this item is output
    for information only and it is not imported.

    Field: FHoriz16
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f16. When the IsRad15To18 item is Yes this item is output
    for information only and it is not imported.

    Field: FHoriz17
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f17. When the IsRad15To18 item is Yes this item is output
    for information only and it is not imported.

    Page 527 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FHoriz18
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f18. When the IsRad15To18 item is Yes this item is output
    for information only and it is not imported.

    Field: FVert1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f1. This item only applies to right exterior girders.

    Field: FVert2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f2. This item only applies to right exterior girders.

    Field: FVert3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f3. This item only applies to left exterior girders.

    Field: FVert4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f4. This item only applies to left exterior girders.

    Field: FVert7
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f7. When the IsRad7To10 item is Yes this item is output for
    information only and it is not imported.

    Page 528 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FVert8
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f8. When the IsRad7To10 item is Yes this item is output for
    information only and it is not imported.

    Field: FVert9
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f9. When the IsRad7To10 item is Yes this item is output for
    information only and it is not imported.

    Field: FVert10
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f10. When the IsRad7To10 item is Yes this item is output for
    information only and it is not imported.

    Field: FVert11
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f11. When the IsRad11To14 item is Yes this item is output for
    information only and it is not imported.

    Field: FVert12
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f12. When the IsRad11To14 item is Yes this item is output for
    information only and it is not imported.

    Field: FVert13
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f13. When the IsRad11To14 item is Yes this item is output for
    information only and it is not imported.

    Page 529 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FVert14
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f14. When the IsRad11To14 item is Yes this item is output for
    information only and it is not imported.

    Field: FVert15
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f15. When the IsRad15To18 item is Yes this item is output for
    information only and it is not imported.

    Field: FVert16
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f16. When the IsRad15To18 item is Yes this item is output for
    information only and it is not imported.

    Field: FVert17
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f17. When the IsRad15To18 item is Yes this item is output for
    information only and it is not imported.

    Field: FVert18
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f18. When the IsRad15To18 item is Yes this item is output for
    information only and it is not imported.
    Table: Bridge Section Definitions 20 - Adv Box Gird 4 - Interior Girder

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Page 530 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IntGirdNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The interior girder number starting from the left side of the section.

    Field: GirderThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the specified girder.

    Field: FHoriz1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f1.

    Field: FHoriz2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f2.

    Field: FHoriz3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f3.

    Field: FHoriz4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f4.

    Field: FHoriz5
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f5.

    Page 531 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FHoriz6
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    horizontal dimension of fillet f6.

    Field: FVert1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f1.

    Field: FVert2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f2.

    Field: FVert3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f3.

    Field: FVert4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f4.

    Field: FVert5
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f5.

    Field: FVert6
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    vertical dimension of fillet f6.
    Table: Bridge Section Definitions 21 - Adv Box Gird 5 - Slab Thickness
    Page 532 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: SpaceNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder space number starting from the left side of the section.

    Field: TopSlabThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab, not including fillets, in the specified space.

    Field: BotSlabThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bottom slab, not including fillets, in the specified space.
    Table: Bridge Section Definitions 22 - Steel U Girders 1 - General

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property associated with the concrete deck of the bridge section.

    Field: NumGirds
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The total number of girders in the bridge section.
    Page 533 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total width of the top slab of the bridge section.

    Field: GirdLayout
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'Along Layout Line' or 'Straight' indicating how the girders are laid out. This
    options allows straight girders on a curved bridge.

    Field: DiffSpacing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the spacing between beams is not constant. It is No if all spaces
    between beams are the same.

    Field: DiffHaunch
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the concrete haunch height above the girder is not the same for all
    girders. Otherwise it is No.

    Field: DiffSection
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the frame section property is not the same for all girders. Otherwise it
    is No.

    Field: DiffBrace
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the steel U girder top lateral bracing type is not the same for all girders.
    Otherwise it is No.

    Page 534 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DiffBracSec
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the bracing section of the steel U girder top lateral bracing is not the
    same for all girders. Otherwise it is No.

    Field: TopSlabThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bridge section top slab (not including the overhangs).

    Field: HaunchHSame
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the concrete haunch above the girder when all girders have the same
    concrete haunch height. This item only applies when the DiffHaunch item is No. If the
    DiffHaunch item is Yes then the haunch heights are provided in a separate table.

    Field: GirdSecSame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The girder frame section property when all girders have the same property. This item only
    applies when the DiffSection item is No. If the DiffSection item is Yes then the girder
    frame section properties are provided in a separate table.

    Field: BraceSame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The steel U girder top lateral bracing type when all girders have the same type. This item
    only applies when the DiffBrace item is No. If the DiffBrace item is Yes then the girder
    frame section properties are provided in a separate table.

    Page 535 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BraceSecSam
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The bracing section for the steel U girder top bracing when all girders have the same
    section. This item only applies when the DiffBracSec item is No. If the DiffBracSec item
    is Yes then the girder frame section properties are provided in a separate table.

    Field: GirdAreaObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the girders in area object models are to be modeled using area objects.
    This item is No if the girders in area object models are to be modeled using frame objects.

    Field: FlangeMesh
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the GirdAreaObj item is Yes. It is the maximum width of a
    meshed element in the girder flange.

    Field: WebMesh
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the GirdAreaObj item is Yes. It is the maximum height of a
    meshed element in the girder web.

    Field: LOLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the left side of the section.

    Field: LOOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the left side of the section at the outer edge of
    the overhang.

    Page 536 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ROLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the top slab overhang on the right side of the section.

    Field: ROOuterThk
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top slab overhang on the right side of the section at the outer edge of
    the overhang.

    Field: CurbLeft
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the inside edge of the left live load
    curb.

    Field: CurbRight
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the right edge of the bridge deck to the inside edge of the right live load
    curb.

    Field: CurbMedian
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the left edge of the bridge deck to the centerline of the median live load
    curb.

    Field: CurbMWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the median live load curb.

    Page 537 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RefPtOffX
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system X direction offset from the the bridge section
    reference point to the insertion point.

    Field: RefPtOffY
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bridge section local coordinate system Y direction offset from the the bridge section
    reference point to the insertion point.
    Table: Bridge Section Definitions 23 - Steel U Girders 2 - Spacing

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: SpaceNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder space number starting from the left side of the section.

    Field: Spacing
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The center of girder to center of girder distance for the specified space.
    Table: Bridge Section Definitions 24 - Steel U Girders 3 - Haunches

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Page 538 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: HaunchHt
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the concrete haunch above the specified girder.
    Table: Bridge Section Definitions 25 - Steel U Girders 4 - Sections

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: GirderSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The frame section property for the specified girder.
    Table: Bridge Section Definitions 26 - Steel U Girders 5 - Bracings

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Page 539 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: BraceType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The bracing type for the steel U girder top lateral bracing.

    Field: BraceSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The frame section property for the steel U girder top lateral bracing.
    Table: Bridge Section Definitions - Girder Output Location Data

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge section.

    Field: GirderNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The girder number starting from the left side of the section. Girder 1 is the left exterior
    girder, girder 2 is the first interior girder, and so on.

    Field: VertLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'Center of gravity', 'Dist from top', or 'Rel dist from top' indicating the
    vertical location of the girder force output point.

    Page 540 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HorizLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'Web center', 'Trib width center', or 'Dist from web center' indicating the
    horizontal location of the girder force output point.

    Field: DistTop
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The vertical distance from the top of the top slab to the vertical location of the girder force
    output point. This item only applies when the VertLoc item is 'Dist from top'.

    Field: RelDistTop
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The relative verticaldistance from the top of the top slab to the vertical location of the
    girder force output point. The relative distance is equal to the actual distance divided by
    the section depth.This item only applies when the VertLoc item is 'Rel dist from top'.

    Field: DistWeb
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The horizontal distance from the center of the girder web to the horizontal location of the
    girder force output point. This item only applies when the HorizLoc item is 'Dist from
    web center'.
    Table: Bridge Temperature Gradient Definitions 01 - General

    Field: TempGrad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge temperature gradient load.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either AASHTO, JTG D60 or User indicating the temperature gradient load type.

    Page 541 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Zone
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 1, 2, 3 or 4 indicating the AASHTO solar radiation zone. This item only
    applies when the Type item is AASHTO.

    Field: Overlay
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Plain Concrete or Asphalt indicating the Chinese JTG D60 wearing surface.
    This item only applies when the Type item is JTG D60.

    Field: AsphThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This is the asphalt thickness. This item only applies when the Type item is JTG D60 and
    the Overlay item is Asphalt.

    Field: Arch
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the Chinese JTG D60 arch factor (0.7) is used. This item only applies
    when the Type item is JTG D60.

    Field: NegMult
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This multiplier times the positive temperature change values gives the negative
    temperature change values. This item only applies when the Type item is AASHTO or
    JTG D60.

    Field: UserType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either AASHTO, JTG D60 or General indicating the user temperature gradient load
    type. This item only applies when the Type item is User.

    Page 542 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumDist
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is the number of distances specified. This item only applies when the Type item is
    User and the UserType item is General.

    Field: VarDist
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is the distance item which may vary. One of the distances specified by the NumDist
    item must be input here. This item only applies when the Type item is User and the
    UserType item is General.

    Field: TempType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Positive and Negative, Positive Only or Negative Only indicating the user
    temperature gradient load temperature types specified. This item only applies when the
    Type item is User and the UserType item is General.
    Table: Bridge Temperature Gradient Definitions 02 - User Distances

    Field: TempGrad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge temperature gradient load.

    Field: DistNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The distance number. This ranges from 1 to the specified number of distances.

    Field: Dist
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance (length) for the specified distance number.
    Table: Bridge Temperature Gradient Definitions 03 - User Temperatures

    Page 543 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TempGrad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a bridge temperature gradient load.

    Field: TempNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The temperature number. This ranges from 1 to the specified number of distances plus 1.

    Field: TempPos
    Field is Imported: Yes
    Format: Temperature Change (Forces section of form)
    Units: Temp
    The positive temperature change for the specified temperature number.

    Field: TempNeg
    Field is Imported: Yes
    Format: Temperature Change (Forces section of form)
    Units: Temp
    The negative temperature change for the specified temperature number.
    Table: Cable Added Mass Assignments

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: MassPerLen
    Field is Imported: Yes
    Format: Mass/Length (Mass and Weight section of form)
    Units: Force-Sec2/Length2
    Added mass per unit length applied to the object.
    Table: Cable Insertion Point Assignments

    Page 544 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system in which the joint offsets are defined.

    Field: JtOffsetXI
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The rigid frame joint offset in the X (1) direction at the I-end of the frame object. A
    positive offset is measured from the joint location to the end of the frame object (at the
    cardinal point) in the positive direction of the specified coordinate system.

    Field: JtOffsetYI
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The rigid frame joint offset in the Y (2) direction at the I-end of the frame object. A
    positive offset is measured from the joint location to the end of the frame object (at the
    cardinal point) in the positive direction of the specified coordinate system.

    Field: JtOffsetZI
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The rigid frame joint offset in the Z (3) direction at the I-end of the frame object. A
    positive offset is measured from the joint location to the end of the frame object (at the
    cardinal point) in the positive direction of the specified coordinate system.

    Field: JtOffsetXJ
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The rigid frame joint offset in the X (1) direction at the J-end of the frame object. A
    positive offset is measured from the joint location to the end of the frame object (at the
    cardinal point) in the positive direction of the specified coordinate system.
    Page 545 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JtOffsetYJ
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The rigid frame joint offset in the Y (2) direction at the J-end of the frame object. A
    positive offset is measured from the joint location to the end of the frame object (at the
    cardinal point) in the positive direction of the specified coordinate system.

    Field: JtOffsetZJ
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The rigid frame joint offset in the Z (3) direction at the J-end of the frame object. A
    positive offset is measured from the joint location to the end of the frame object (at the
    cardinal point) in the positive direction of the specified coordinate system.

    Field: Transform
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the frame stiffness is transformed for offsets (cardinal point offset or
    joint offset) from it centroid. Otherwise it is No.
    Table: Cable Loads - Deformation

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: IncludeU1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the U1 degree of freedom. Otherwise it is
    No.

    Page 546 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item is the deformation specified for the U1 degree of freedom.
    Table: Cable Loads - Distributed

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the load is defined. Local means that the load is
    specified in an object local axis direction.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Force or Moment indicating the type of load assigned.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 1, 2, 3, X, Y, Z, X Proj, Y Proj, Z Proj, Gravity or Grav Proj indicating the
    direction of the load. 1, 2 and 3 indicate the local axes directions of the frame object. X,
    Y and Z indicate the X, Y and Z directions of the specified coordinate system. Gravity is
    in the negative global Z direction. X Proj, Y Proj or Z Proj are projected forces in the
    specified coordinate system. Projected forces are scaled by the sine of the angle between
    the IncludeMoments object and the direction of load. Projected moments are scaled by the
    cosine of the angle between the frame object and the direction of load.
    Page 547 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FOverL
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The force per unit length over the full cable length.

    Field: MOverL
    Field is Imported: Yes
    Format: Moment/Length (Forces section of form)
    Units: Force-Length/Length
    The moment per unit length over the full cable length.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified distributed load.
    Table: Cable Loads - Gravity

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the gravity loads are defined.

    Page 548 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MultiplierX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the X-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.

    Field: MultiplierY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the Y-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.

    Field: MultiplierZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the Z-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.
    Table: Cable Loads - Strain

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The line object local component to which the specified strain load is applied. This is
    either Strain11, Strain12, Strain13, Curvature1, Curvature2 or Curvature3.

    Page 549 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Strain
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strain load applied to the specified component of the object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified strain or curvature. If
    no joint pattern is specified then this item is reported as None.
    Table: Cable Loads - Target Force

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: IncludeP
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the P degree of freedom. Otherwise it is
    No.

    Field: P
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item is the target force specified for the P degree of freedom.

    Page 550 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RelLocP
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the P
    degree of freedom is located.
    Table: Cable Loads - Temperature

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Temperature, Gradient2, or Gradient3 indicating the type of temperature
    load applied to the object.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature Change (Forces section of form)
    Units: Temp
    temperature Label of the load pattern to which the specified auto seismic load applies
    Frame object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The label of a Joint Pattern of scale factors multiplying the temperature change and
    temperature gradient values. If no pattern is specified then a unit scale factor is assumed
    at every joint.

    Page 551 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the temperature load assignment to the frame object is automatically
    created from a bridge object. Otherwise it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this temperature load assignment is associated.
    This item only applies when the AutoBridge item is True.
    Table: Cable Material Temperatures

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The object material temperature.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified material temperatures.
    If no joint pattern is specified then this item is reported as None.
    Table: Cable Output Station Assignments

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Page 552 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StationType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either MinNumSta or MaxStaSpcg. It indicates which of the output station fields
    (MinNumSta or MaxStaSpcg) will be read on import.

    Field: MinNumSta
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The minimum number of output stations along the object. If the MaxStaSpcg item is
    specified for the object then this item is blank.

    Field: MaxStaSpcg
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum spacing between output stations along the object. If the MinNumSta item
    is specified for the object then this item is blank.

    Field: AddAtElmInt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if stations are added at locations where other elements intersect the
    considered element. Otherwise it is No.

    Field: AddAtPtLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if stations are added at concentrated load (force or moment) locations.
    Otherwise it is No.
    Table: Cable Property Modifiers

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Page 553 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for cross-section (axial) area. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.

    Field: AS2Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for shear area in the 2 direction. This item is multiplied times the similar
    modifier specified for the section property; it does not replace the modifier specified for
    the section property.

    Field: AS3Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for shear area in the 3 direction. This item is multiplied times the similar
    modifier specified for the section property; it does not replace the modifier specified for
    the section property.

    Field: JMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for torsional constant. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.

    Field: I22Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for moment of inertia about the local 2-axis. This item is multiplied times the
    similar modifier specified for the section property; it does not replace the modifier
    specified for the section property.

    Page 554 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: I33Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for moment of inertia about the local 3-axis. This item is multiplied times the
    similar modifier specified for the section property; it does not replace the modifier
    specified for the section property.

    Field: MassMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for the element self mass. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.

    Field: WeightMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for the element self weight. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.

    Field: EAModifier
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    This item is the modification factor for axial stiffness if the Direct Analysis method is
    used. Its value is normally fixed at 0.8 and is independent of Tau_b. This item is a
    function of the ratio of alpha times the design axial compression force to the force
    required to yield the steel section.

    Field: EIModifier
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    This item is the modification factor for flexural stiffness if the Direct Analysis method is
    used. Its value is a function of Tau_b. Its assumes a fixed value of 0.8 if the Tau_b is
    taken as fixed.
    Table: Cable Property Modifier Definitions

    Page 555 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined cable property modifier.

    Field: AMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for cross-section (axial) area. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.

    Field: MassMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for the element self mass. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.

    Field: WeightMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for the element self weight. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.
    Table: Cable Section Assignments

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: CableSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a cable section.

    Page 556 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MatProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Default, or the name of a Material. Default means that the material
    property for the cable object is taken from the material property designated for the cable
    section that is assigned to the cable object.
    Table: Cable Section Definitions

    Field: CableSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the cable section.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property assigned to the cable section.

    Field: Specify
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Diameter or Area indicating which cable section property is specified. All
    other cable section properties are computed from the specified property assuming a
    circular section shape.

    Field: Diameter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the cable section.

    Field: Area
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Cross-sectional area of the cable section.

    Page 557 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TorsConst
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Torsional constant for the cable section.

    Field: I
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Moment of inertia for the cable section.

    Field: AS
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Shear area for the cable section.

    Field: Color
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color associated with the
    section.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: TotalWt
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    Total weight of all objects in the model that are assigned the specified cable section.

    Field: TotalMass
    Field is Imported: No
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    Total mass of all objects in the model that are assigned the specified cable section.

    Page 558 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Area modifier for the specified cable section.

    Field: A2Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear area modifier for shear parallel to the local 2-axis for the specified cable section.

    Field: A3Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear area modifier for shear parallel to the local 3-axis for the specified cable section.

    Field: JMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Torsional constant modifier for the specified cable section.

    Field: I2Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Moment of inertia modifier for bending about the local 2-axis for the specified cable
    section.

    Field: I3Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Moment of inertia modifier for bending about the local 3-axis for the specified cable
    section.

    Page 559 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Mass multiplier for the specified cable section.

    Field: WMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Weight multiplier for the specified cable section.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified cable section property.

    Field: Notes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    User notes for the specified cable section property.
    Table: Cable Shape Data

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: CableType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following parameters which is specified to define the cable shape:
    Minimum Tension At I-End,
    Minimum Tension At J-End,
    Tension At I-End,
    Tension At J-End,
    Horizontal Tension Component,
    Maximum Vertical Sag,
    Low-Point Vertical Sag,
    Page 560 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Undeformed Length, or
    Undeformed Relative Length.

    Field: NumSegs
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of segments used to define the cable.

    Field: TensionI
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The tension at the I-end of the cable.

    Field: TensionJ
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The tension at the J-end of the cable.

    Field: TensionHorz
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The horizontal component of tension in the cable. This force is constant along the cable
    length.

    Field: SagMax
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum vertical sag of the cable.

    Field: SagLow
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The low point vertical sag of the cable.

    Page 561 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UnDefLength
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The undeformed length of the cable.

    Field: UnDefRelLen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The undeformed relative length of the cable (relative to the distance between the cable end
    points).

    Field: AddedWt
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    Weight per unit length of the cable that is added to the weight specified in the material
    property definition for the cable
    This weight is only used for determination of the cable shape. It is not actually applied to
    the structural model. If the added weight is needed in the structural model then it should
    also be specified as a cable load acting on the model.

    Field: ProjLoad
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    A projected horizontal load per unit length of the cable.
    This load is only used for determination of the cable shape. It is not actually applied to the
    structural model. If the load is needed in the structural model then it should also be
    specified as a cable load acting on the model.

    Field: UseDefGeom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the initial shape of the cable used in the model is to be based on the
    deformed (loaded) cable geometry calculated from the specified cable parameters. It is No
    if the shape of the cable is based on undeformed (unloaded) geometry.
    In the special case where the specified undeformed length of the cable is shorter than the
    chord length of the cable and the cable shape is specified to be based on undeformed
    Page 562 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    geometry, the cable shape used by the program is the shape that occurs after the cable has
    been stretched to the full chord length and before any load is applied.

    Field: UseFrames
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the cable is to be modelled using frame elements. Otherwise it is No.
    Table: Cable Vehicle Response Component Overwrites

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: Usage
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either AASHTO HL - Superstructure, AASHTO HL - Reaction, or AASHTO H &
    HS Superstructure indicating the vehicle type and structural member type to which the
    overwrite applies.
    AASHTO HL - Superstructure refers to the superstructure negative moments over
    supports and applies to AASHTO H, HS and HL loading.
    AASHTO HL - Reaction refers to reactions at interior supports (piers) and applies only to
    AASHTO HL loaoding.
    AASHTO H & HS Superstructure refers to superstructure moments (positive or negative)
    and applies to AASHTO H and HS loading.

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either P, V2, V3, T, M2 or M3 indicating the output component to which the
    overwrite applies.

    Page 563 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Do Not Use, Use Positive Values, Use Negative Values, or Use All Values
    indicating the portion of the output for the specified component to which the overwrite
    applies.
    Table: Case - Buckling 1 - General

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Buckling-type load case.

    Field: NumBuckMode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of buckling modes requested.

    Field: EigenTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The eigenvalue convergence tolerance for the buckling load case.
    Table: Case - Buckling 2 - Load Assignments

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Buckling-type load case.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Load pattern or Accel indicating the type of load specified.

    Page 564 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either the name of a load pattern, Accel UX, Accel UY, Accel UZ, Accel RX, Accel
    RY, or Accel RZ.
    Accel UX, UY and UZ are uniform translational accelerations acting in the global X, Y
    and Z directions, respectively. Accel RX, RY and RZ are uniform rotational accelerations
    acting about the global X, Y and Z directions, respectively. The force applied at each joint
    is proportional to the mass tributary to that joint.

    Field: LoadSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A unitless scale factor that multiplies the associated load pattern value.

    Field: TransAccSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    A scale factor (with translational acceleration units) that multiplies the associated
    translational acceleration value.

    Field: RotAccSF
    Field is Imported: Yes
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    A scale factor (with rotational acceleration units) that multiplies the associated rotational
    acceleration value.
    Table: Case - Direct History 1 - General

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Direct History-type load case.

    Page 565 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OutSteps
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of output time steps.

    Field: StepSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The output time-step size.
    Table: Case - Direct History 2 - Load Assignments

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Direct History-type load case.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Load pattern or Accel indicating the type of load specified.

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either the name of a load pattern or it is one of Accel U1, Accel U2, Accel U3,
    Accel R1, Accel R2, or Accel R3. The Accel items refer to ground acceleration loads in
    acceleration local coordinates. Note that the acceleration local coordinates are defined by
    the CoordSys and Angle items.

    Field: Function
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a function defining the time variation of the ground acceleration or load pattern.

    Page 566 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a load pattern.

    Field: TransAccSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a translational acceleration.

    Field: RotAccSF
    Field is Imported: Yes
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a rotational acceleration.

    Field: TimeFactor
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Scale factor multiplying the time (abscissa) values of the specified function.

    Field: ArrivalTime
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Arrival time for the specified function.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Coordinate system used to define the acceleration directions. This item only applies when
    the LoadType item is Acceleration.

    Page 567 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Coordinate angle between the acceleration local 1 axis and the +X-axis of the coordinate
    system specified by the CoordSys item. The rotation is about the Z-axis of the specified
    coordinate system. This item only applies when the LoadType item is Acceleration.
    Table: Case - Direct History 3 - Proportional Damping

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Direct History-type load case.

    Field: SpecifyType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Direct, Period or Frequency indicating the method used to specify the mass
    and stiffness coefficients. Direct means that they are directly specified. Period means that
    they are specified using two periods and two associated damping ratios. Frequency means
    that they are specified using two frequencies and two associated damping ratios.

    Field: MassCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: 1/Sec
    The specified mass coefficient.

    Field: StiffCoeff
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The specified stiffness coefficient.

    Field: Period1
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The first period value used when the SpecifyType item is Period.

    Page 568 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frequency1
    Field is Imported: No
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The first frequency value used when the SpecifyType item is Frequency.

    Field: Damping1
    Field is Imported: No
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The first damping ratio value used when the SpecifyType item is either Period or
    Frequency.

    Field: Period2
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The second period value used when the SpecifyType item is Period.

    Field: Frequency2
    Field is Imported: No
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The second frequency value used when the SpecifyType item is Frequency.

    Field: Damping2
    Field is Imported: No
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The second damping ratio value used when the SpecifyType item is either Period or
    Frequency.
    Table: Case - Direct History 4 - Integration Parameters

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Direct History-type load case.

    Page 569 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IntMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Newmark, Wilson, Collocation, HilberHughesTaylor or ChungHulbert
    indicating the time integration method used.

    Field: Gamma
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The value of the Gamma integration parameter. This item is an input value for the
    Newmark, Collocation and ChungHulbert integration methods.
    Nominal flexural resistance stress for negative moment based on bottom flange lateral
    torsional buckling. Reported only if applicable, otherwise set to zero.

    Field: Beta
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The value of the Beta integration parameter. This item is an input value for the Newmark,
    Collocation and ChungHulbert integration methods.
    Controlling factored flexural resistance stress for bottom flange for negative moment.
    Reported only if applicable, otherwise set to zero.

    Field: Theta
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The value of the Theta integration parameter. This item is an input value for the Wilson
    and Collocation integration methods.

    Field: Alpha
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The value of the Alpha integration parameter. This item is an input value for the
    HilberHughesTaylor and ChungHulbert integration methods.

    Page 570 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The value of the AlphaM integration parameter. This item is an input value for the
    ChungHulbert integration method.
    Table: Case - Direct History 5 - Nonlinear Parameters

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Direct History-type load case.

    Field: GeoNonLin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either None, P-Delta, or Large Displ indicating the type of geometric
    nonlinearity used for this load case, if any.

    Field: DTMax
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Maximum allowed substep size.

    Field: DTMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Minimum allowed substep size.

    Field: MaxIterCS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Maximum number of constant-stiffness iterations per step.

    Page 571 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxIterNR
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Maximum number of Newton-Raphson iterations per step.

    Field: ItConvTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Relative iteration convergence tolerance.

    Field: UseEvStep
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if event-to-event stepping is used. Otherwise it is No.

    Field: EvLumpTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Relative event lumping tolerance.

    Field: LSPerIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Maximum number of line searches per iteration.

    Field: LSTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The line search acceptance tolerance (relative).

    Field: LSStepFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The line search step factor.

    Page 572 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameTC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if frame object tension or compression only is considered. Otherwise it is
    No.

    Field: FrameHinge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if frame object hinges are considered. Otherwise it is No.

    Field: CableTC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if cable object tension or compression only is considered. Otherwise it is
    No.

    Field: LinkTC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if hook and gap object tension and compression only is considered.
    Otherwise it is No.

    Field: LinkOther
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if other link object nonlinearity is considered. Otherwise it is No. This
    item includes all link nonlinearity not included in the LinkTC item.
    Table: Case - Frequency History 1 - General

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Frequency History-type load case.

    Page 573 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HistoryType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Transient, Periodic or Static indicating the type of modal history. For
    linear modal histories all three types are applicable. For nonlinear modal histories only
    the Transient type is applicable.

    Field: OutSteps
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of output time steps.

    Field: StepSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The output time-step size.

    Field: DampingType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Constant or Interpolated indicating the type of hysteretic damping
    specified.
    Table: Case - Frequency History 2 - Load Assignments

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Frequency History-type load case.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Load pattern or Accel indicating the type of load specified.

    Page 574 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either the name of a load pattern or it is one of Accel U1, Accel U2, Accel U3,
    Accel R1, Accel R2, or Accel R3. The Accel items refer to ground acceleration loads in
    acceleration local coordinates. Note that the acceleration local coordinates are defined by
    the CoordSys and Angle items.

    Field: Function
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a function defining the time variation of the ground acceleration or load pattern.

    Field: LoadSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a load pattern.

    Field: TransAccSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a translational acceleration.

    Field: RotAccSF
    Field is Imported: Yes
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a rotational acceleration.

    Field: TimeFactor
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Scale factor multiplying the time (abscissa) values of the specified function.

    Page 575 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ArrivalTime
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Arrival time for the specified function.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Coordinate system used to define the acceleration directions. This item only applies when
    the LoadType item is Acceleration.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Coordinate angle between the acceleration local 1 axis and the +X-axis of the coordinate
    system specified by the CoordSys item. The rotation is about the Z-axis of the specified
    coordinate system. This item only applies when the LoadType item is Acceleration.
    Table: Case - Frequency History 3 - Constant Damping

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Frequency History-type load case.

    Field: MassCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: 1/Sec2
    The mass proportional coefficient for constant hysteretic damping.

    Field: StiffCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stiffness proportional coefficient for constant hysteretic damping.
    Table: Case - Frequency History 4 - Interpolated Damping

    Page 576 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Frequency History-type load case.

    Field: FreqUnits
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Hz or RPM indicating the units of the frequency when it is displayed on the
    form. Hz is the same as cycles per second and RPM is revolutions per minute. Note that
    the frequency is always displayed in Hz in the tables.

    Field: Frequency
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The frequency at which the specified mass and stiffness proportional coefficients apply.

    Field: MassCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: 1/Sec2
    The mass proportional coefficient for interpolated hysteretic damping.

    Field: StiffCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stiffness proportional coefficient for interpolated hysteretic damping.
    Table: Case - Frequency History 5 - Integration Parameters

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Frequency History-type load case.

    Page 577 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SubSteps
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: PadFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .
    Table: Case - Modal 1 - General

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Modal-type load case.

    Field: ModeType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Eigen or Ritz indicating the type of modes requested.

    Field: MaxNumModes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of modes requested.

    Field: MinNumModes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The minimum number of modes requested.

    Field: EigenShift
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The eigenvalue shift frequency. This item only applies when the ModeType is Eigen.
    Page 578 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EigenCutoff
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The eigenvalue cutoff frequency radius. This item only applies when the ModeType is
    Eigen.

    Field: EigenTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The relative convergence tolerance on eigenvalues. This item only applies when the
    ModeType is Eigen.

    Field: AutoShift
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is Yes if automatic frequency shifting is allowed; otherwise it is No. This item
    only applies when the ModeType is Eigen.
    Table: Case - Modal 2 - Load Assignments - Eigen

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Modal-type load case.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Load pattern, Accel or Link indicating the type of load specified.

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    If the LoadType item is Load pattern, then this is the name of a load pattern.
    Factored flexural resistance stress for top flange for negative moment. Reported only if
    applicable, otherwise set to zero.

    Page 579 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: TargetPar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Percent
    The target mass participation ratio.

    Field: StatCorrect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if static correction modes are to be calculated. Otherwise it is No.
    Table: Case - Modal 3 - Load Assignments - Ritz

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Modal-type load case.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Load pattern, Accel or Link indicating the type of load specified.

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    If the LoadType item is Load pattern, then this is the name of a load pattern.
    If the LoadType item is Acceleration, then this is either Accel UX, Accel UY, Accel UZ,
    Accel RX , Accel RY or Accel RZ.
    If the LoadType item is Link, then this All Links.

    Page 580 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxCycles
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of generation cycles to be performed for the specified ritz starting
    vector. Inputting 0 means there is no limit on the number of cycles.

    Field: TargetPar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Percent
    The target dynamic participation ratio.
    Table: Case - Modal History 1 - General

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Modal History-type load case.

    Field: HistoryType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Transient, Periodic or Static indicating the type of modal history. For
    linear modal histories all three types are applicable. For nonlinear modal histories only
    the Transient type is applicable.

    Field: OutSteps
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of output time steps.

    Field: StepSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The output time-step size.

    Page 581 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DampingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This item is either Constant, Inter-Period, Inter-Freq or Pro-Direct, Pro-Period, or -Freq
    indicating the method used to specify the modal damping.
    Inter-Period means to interpolate based on damping given at specified periods. Inter-Freq
    means to interpolate based on damping given at specified frequencies.
    Pro-Direct means mass and stiffness proportional coefficients are directly specified. ProPeriod means that mass and stiffness proportional coefficients are calculated based on two
    specified period and damping sets. Pro-Freq means that mass and stiffness proportional
    coefficients are calculated based on two specified frequency and damping sets.

    Field: ConstDamp
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    This item only applies if the DampingType item is Constant. It is the constant damping
    value.
    Table: Case - Modal History 2 - Load Assignments

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Modal History-type load case.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Load pattern or Accel indicating the type of load specified.

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either the name of a load pattern or it is one of Accel U1, Accel U2, Accel U3,
    Accel R1, Accel R2, or Accel R3. The Accel items refer to ground acceleration loads in
    acceleration local coordinates. Note that the acceleration local coordinates are defined by
    the CoordSys and Angle items.

    Page 582 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Function
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a function defining the time variation of the ground acceleration or load pattern.

    Field: LoadSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a load pattern.

    Field: TransAccSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a translational acceleration.

    Field: RotAccSF
    Field is Imported: Yes
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a rotational acceleration.

    Field: TimeFactor
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Scale factor multiplying the time (abscissa) values of the specified function.

    Field: ArrivalTime
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Arrival time for the specified function.

    Page 583 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Coordinate system used to define the acceleration directions. This item only applies when
    the LoadType item is Acceleration.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Coordinate angle between the acceleration local 1 axis and the +X-axis of the coordinate
    system specified by the CoordSys item. The rotation is about the Z-axis of the specified
    coordinate system. This item only applies when the LoadType item is Acceleration.
    Table: Case - Modal History 3 - Interpolated Damping

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Modal History-type load case.

    Field: Period
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The period at which the specified damping ratio applies.

    Field: Frequency
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The frequency at which the specified damping ratio applies.

    Field: Damping
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The damping ratio as a fraction of critical damping (0.05 = 5%).
    Table: Case - Modal History 4 - Proportional Damping

    Page 584 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Modal History-type load case.

    Field: SpecifyType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Direct, Period or Frequency indicating the method used to specify the mass
    and stiffness coefficients. Direct means that they are directly specified. Period means that
    they are specified using two periods and two associated damping ratios. Frequency means
    that they are specified using two frequencies and two associated damping ratios.

    Field: MassCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: 1/Sec
    The specified mass coefficient.

    Field: StiffCoeff
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The specified stiffness coefficient.

    Field: Period1
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The first period value used when the SpecifyType item is Period.

    Field: Frequency1
    Field is Imported: No
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The first frequency value used when the SpecifyType item is Frequency.

    Page 585 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Damping1
    Field is Imported: No
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The first damping ratio value used when the SpecifyType item is either Period or
    Frequency.

    Field: Period2
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The second period value used when the SpecifyType item is Period.

    Field: Frequency2
    Field is Imported: No
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The second frequency value used when the SpecifyType item is Frequency.

    Field: Damping2
    Field is Imported: No
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The second damping ratio value used when the SpecifyType item is either Period or
    Frequency.
    Table: Case - Modal History 5 - Damping Overrides

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Modal History-type load case.

    Field: Mode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The mode number to which the specified damping applies.

    Page 586 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Damping
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    Fraction of critical damping for the specified mode (0.05 = 5% critical damping).
    Table: Case - Modal History 6 - Nonlinear Parameters

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Modal History-type load case.

    Field: PeriodStat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Period at which, and below, modes are treated as static.

    Field: DTMax
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shell area element Von Mises stress, at the specified joint for the specified layer and
    layer integration point.

    Field: DTMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Minimum allowed substep size.

    Field: FConvTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Relative force convergence tolerance.

    Page 587 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EConvTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Relative energy convergence tolerance.

    Field: ForceItMax
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Maximum number of force iterations for large substeps.

    Field: ForceItMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Minimum number of force iterations for large substeps.

    Field: ConvFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Convergence factor.

    Field: FrameTC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if frame object tension or compression only is considered. Otherwise it is
    No.

    Field: FrameHinge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if frame object hinges are considered. Otherwise it is No.

    Page 588 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CableTC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if cable object tension or compression only is considered. Otherwise it is
    No.

    Field: LinkTC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if hook and gap object tension and compression only is considered.
    Otherwise it is No.

    Field: LinkOther
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if other link object nonlinearity is considered. Otherwise it is No. This
    item includes all link nonlinearity not included in the LinkTC item.
    Table: Case - Moving Load 1 - Lane Assignments

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Moving Load-type load case.

    Field: AssignNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The lane assignment number.

    Field: VehClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The vehicle class used for this lane assignment.

    Page 589 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ScaleFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A scale factor that multiplies the vehicle loads in the associated vehicle class.

    Field: MinLoaded
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Minimum number of lanes to be loaded by the specified vehicle class for this lane
    assignment.

    Field: MaxLoaded
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Maximum number of lanes to be loaded by the specified vehicle class for this lane
    assignment.

    Field: NumLanes
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Total number of lanes loaded by the specified vehicle class for this lane assignment.
    Table: Case - Moving Load 2 - Lanes Loaded

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Moving Load-type load case.

    Field: AssignNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The lane assignment number.

    Page 590 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lane
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a lane that is loaded by the vehicle class associated with this lane assignment.
    Table: Case - Moving Load 3 - MultiLane Factors

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Moving Load-type load case.

    Field: NumberLanes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of loaded lanes considered.

    Field: ScaleFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The multiple-lane scale factor applied to the Moving Load load case if the number of
    loaded lanes is that specified by the NumberLanes item.
    Table: Case - Multistep Static 1 - Load Assignments

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Multistep Static-type load case.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Load pattern, or Accel indicating the type of load specified.

    Page 591 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either the name of a load pattern, Accel UX, Accel UY, Accel UZ, or a mode
    number.
    Accel UX, UY and UZ are uniform translational acceleration acting in the global X, Y and
    Z directions, respectively. Accel RX, RY and RZ are uniform rotational acceleration
    acting in the global X, Y and Z directions, respectively. The force applied at each joint is
    proportional to the mass tributary to that joint.

    Field: LoadSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A unitless scale factor that multiplies the associated load pattern value.

    Field: TransAccSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    A scale factor (with translational acceleration units) that multiplies the associated
    acceleration value. This item applies when the specified acceleration is translational.

    Field: RotAccSF
    Field is Imported: Yes
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    A scale factor (with rotational acceleration units) that multiplies the associated
    acceleration value. This item applies when the specified acceleration is rotational.
    Table: Case - Power Spectral Density 1 - General

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Power Spectral Density-type load case.

    Page 592 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SolType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Modal or Direct indicating the type of solution.

    Field: FirstFreq
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    This item is the specified first frequency. The analysis is performed for the specified
    FirstFreq and LastFreq and if FreqInc is greater than 1 for intermediate frequencies and for
    any additional frequencies specified that fall between the FirstFreq and the LastFreq.

    Field: LastFreq
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    This item is the specified last frequency. The analysis is performed for the specified
    FirstFreq and LastFreq and if FreqInc is greater than 1 for intermediate frequencies and for
    any additional frequencies specified that fall between the FirstFreq and the LastFreq.

    Field: NumFreqInc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the specified number of frequency increments. If this item is set to 1 then the
    analysis is performed for the specified FirstFreq and LastFreq.

    Field: DampingType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Constant or Interpolated indicating the type of hysteretic damping
    specified.

    Field: AddFreqs
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if additional frequencies have been specified. Otherwise it is No.
    Table: Case - Power Spectral Density 2 - Load Assignments

    Page 593 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Power Spectral Density-type load case.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Load pattern or Accel indicating the type of load specified.

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either the name of a load pattern or it is one of Accel U1, Accel U2, Accel U3,
    Accel R1, Accel R2, or Accel R3. The Accel items refer to ground acceleration loads in
    acceleration local coordinates. Note that the acceleration local coordinates are defined by
    the CoordSys and Angle items.

    Field: Function
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a function of frequency versus value items.

    Field: LoadSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a load pattern.

    Field: TransAccSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a translational acceleration.

    Page 594 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RotAccSF
    Field is Imported: Yes
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a rotational acceleration.

    Field: PhaseAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The phase angle in degrees.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Coordinate system used to define the acceleration directions. This item only applies when
    the LoadType item is Accel.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Coordinate angle between the acceleration local 1 axis and the +X-axis of the coordinate
    system specified by the CoordSys item. The rotation is about the Z-axis of the specified
    coordinate system. This item only applies when the LoadType item is Accel.
    Table: Case - Power Spectral Density 3 - Added Frequencies General

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Power Spectral Density-type load case.

    Field: AddMFreq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if modal frequencies are added. Otherwise it is No.

    Page 595 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AddMDev
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if modal frequency deviations are added. Otherwise it is No.

    Field: AddSpFreq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if specified frequencies are added. Otherwise it is No.
    Table: Case - Power Spectral Density 4 - Added Frequency Deviations

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Power Spectral Density-type load case.

    Field: Deviation
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The specified modal deviations. These are specified as a fraction of the frequency value.
    For example a +2% deviation is entered as 0.02 and a -3% deviation is entered as -0.03.
    The specified deviation must be greater than -1.0.
    Table: Case - Power Spectral Density 5 - Added Specified Frequencies

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Power Spectral Density-type load case.

    Field: Frequency
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The specified frequencies.
    Table: Case - Power Spectral Density 6 - Constant Damping

    Page 596 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Power Spectral Density-type load case.

    Field: MassCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: 1/Sec2
    The mass proportional coefficient for constant hysteretic damping.

    Field: StiffCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stiffness proportional coefficient for constant hysteretic damping.
    Table: Case - Power Spectral Density 7 - Interpolated Damping

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Power Spectral Density-type load case.

    Field: FreqUnits
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Hz or RPM indicating the units of the frequency when it is displayed on the
    form. Hz is the same as cycles per second and RPM is revolutions per minute. Note that
    the frequency is always displayed in Hz in the tables.

    Field: Frequency
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The frequency at which the specified mass and stiffness proportional coefficients apply.

    Page 597 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MassCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: 1/Sec2
    The mass proportional coefficient for interpolated hysteretic damping.

    Field: StiffCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stiffness proportional coefficient for interpolated hysteretic damping.
    Table: Case - Response Spectrum 1 - General

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Response Spectrum-type load case.

    Field: ModalCombo
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modal combination method. This is either CQC, SRSS, ABS, GMC, 10 Percent or
    Double Sum.

    Field: GMCf1
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    GMCf1 and GMCf2 are frequencies that define the rigid-response content of the ground
    motion.

    Field: GMCf2
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    GMCf1 and GMCf2 are frequencies that define the rigid-response content of the ground
    motion.

    Page 598 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PerRigid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either SRSS or ABS indication the periodic plus rigid modal combination option
    motion when the GMC modal combination method is used.

    Field: td
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The earthquake duration used in applying the Double Sum modal combination method.

    Field: DirCombo
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The directional combination method. This is either SRSS, CQC3 or ABS.

    Field: ABSSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor used for the ABS directional combination method.

    Field: MotionType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The ground motion type. Can be either Acceleration or General.

    Field: DampingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This item is either Constant, Inter-Period, Inter-Freq or Pro-Direct, Pro-Period, or ProFreq indicating the method used to specify the modal damping.
    Inter-Period means to interpolate based on damping given at specified periods. Inter-Freq
    means to interpolate based on damping given at specified frequencies.
    Pro-Direct means mass and stiffness proportional coefficients are directly specified. ProPeriod means that mass and stiffness proportional coefficients are calculated based on two
    Page 599 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    specified period and damping sets. Pro-Freq means that mass and stiffness proportional
    coefficients are calculated based on two specified frequency and damping sets.

    Field: ConstDamp
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    This item only applies if the DampingType is Constant. It is the constant modal damping
    (as a fraction of critical damping, 0.05 = 5%) applied to all modes. The damping reported
    here does not include any additional modal damping that may come from link objects in
    the structure.

    Field: EccenRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The eccentricity ratio applicable to all rigid diaphragms.

    Field: NumOverride
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of rigid diaphragms for which eccentricity overrides are specified.
    Table: Case - Response Spectrum 2 - Load Assignments

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Response Spectrum-type load case.

    Field: LoadType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is Acceleration indicating the type of load specified.

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Accel U1, Accel U2, Accel U3, Accel R1, Accel R2, or Accel R3.

    Page 600 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the coordinate system used to define the local acceleration directions.

    Field: Function
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a function that defines the response spectrum curve used for the specified
    acceleration.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The coordinate angle between the response spectrum local 1 axis and the positive X-axis
    in the coordinate system specified by the CoordSys item. Positive angles are measured
    counterclockwise from the coordinate system X axis to the response spectrum local 1 axis.

    Field: LoadSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A unitless scale factor that multiplies the associated load pattern value.

    Field: TransAccSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    A scale factor multiplying the translational acceleration values of the associated response
    spectrum function.

    Field: RotAccSF
    Field is Imported: Yes
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    A scale factor multiplying the rotational acceleration values of the associated response
    spectrum function.
    Table: Case - Response Spectrum 3 - Interpolated Damping

    Page 601 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Response Spectrum-type load case.

    Field: Period
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The period at which the specified damping ratio applies.

    Field: Frequency
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The frequency at which the specified damping ratio applies.

    Field: Damping
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The damping ratio as a fraction of critical damping (0.05 = 5%).
    Table: Case - Response Spectrum 4 - Proportional Damping

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Response Spectrum-type load case.

    Field: SpecifyType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Direct, Period or Frequency indicating the method used to specify the mass
    and stiffness coefficients. Direct means that they are directly specified. Period means that
    they are specified using two periods and two associated damping ratios. Frequency means
    that they are specified using two frequencies and two associated damping ratios.

    Page 602 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MassCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: 1/Sec
    The specified mass coefficient.

    Field: StiffCoeff
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The specified stiffness coefficient.

    Field: Period1
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The first period value used when the SpecifyType item is Period.

    Field: Frequency1
    Field is Imported: No
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The first frequency value used when the SpecifyType item is Frequency.

    Field: Damping1
    Field is Imported: No
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The first damping ratio value used when the SpecifyType item is either Period or
    Frequency.

    Field: Period2
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The second period value used when the SpecifyType item is Period.

    Field: Frequency2
    Field is Imported: No
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The second frequency value used when the SpecifyType item is Frequency.
    Page 603 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Damping2
    Field is Imported: No
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The second damping ratio value used when the SpecifyType item is either Period or
    Frequency.
    Table: Case - Response Spectrum 5 - Damping Overrides

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Response Spectrum-type load case.

    Field: Mode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The mode number to which the specified damping applies.

    Field: Damping
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    Fraction of critical damping for the specified mode (0.05 = 5% critical damping).
    Table: Case - Response Spectrum 6 - Eccentricity Overrides

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Response Spectrum-type load case.

    Field: Diaphragm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the horizontal rigid diaphragm constraint to which the specified eccentricity
    applies.

    Page 604 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Eccen
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    User-specified eccentricity for the specified rigid diaphragm constraint. Note that this
    eccentricity is specified as an absolute length, not a ratio.
    Table: Case - Static 1 - Load Assignments

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Static-type load case.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Load pattern, Accel, or Mode indicating the type of load specified. The
    Mode load type only applies to Nonlinear static analysis cases.

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either the name of a load pattern, Accel UX, Accel UY, Accel UZ, or a mode
    number.
    Accel UX, UY and UZ are uniform translational accelerations acting in the global X, Y
    and Z directions, respectively. Accel RX, RY and RZ are uniform rotational accelerations
    acting about the global X, Y and Z directions, respectively. The force applied at each joint
    is proportional to the mass tributary to that joint.
    A mode number, together with an associated Modal load case implies a force at each joint
    in proportion to the product of the modal displacement, the modal circular frequency
    squared, and the mass tributary to that joint. The force is assumed to act in the direction of
    the modal displacement.

    Field: LoadSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A unitless scale factor that multiplies the associated load pattern (or mode) value.

    Page 605 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TransAccSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    A scale factor (with translational acceleration units) that multiplies the associated
    acceleration value.

    Field: RotAccSF
    Field is Imported: Yes
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    A scale factor (with rotational acceleration units) that multiplies the associated rotational
    acceleration value.
    Table: Case - Static 2 - Nonlinear Load Application

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Static-type load case.

    Field: LoadApp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Full Load or Displ Ctrl indicating the type of load application.

    Field: DisplType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Conjugate or Monitored indicating the control displacement type.

    Field: TargetDispl
    Field is Imported: Yes
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The target translational displacement for the displacement-controlled nonlinear static case.

    Page 606 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TargetRot
    Field is Imported: Yes
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The target rotational displacement for the displacement-controlled nonlinear static case.

    Field: MonitorDOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either U1, U2, U3, R1, R2, or R3. It is the degree of freedom of the specified
    joint for which the displacement is monitored.

    Field: MonitorJt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: GenDispl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .
    Table: Case - Static 4 - Nonlinear Parameters

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Static-type load case.

    Field: Unloading
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Unload Entire, Local Redist or Restart Secant indicating the unloading
    method used when a hinge drops load.

    Page 607 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GeoNonLin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either None, P-Delta, or Large Displ indicating the type of geometric
    nonlinearity used for this load case, if any.

    Field: ResultsSave
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Final State or Multiple States indicating the how much of the analysis
    results are saved.
    This item does not apply for staged construction analysis; see the StageSave item instead.

    Field: MinNumState
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The specified minimum number of saved states. This item only applies if the ResultsSave
    item is Multiple States.

    Field: MaxNumState
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The specified maximum number of saved states. This item only applies if the ResultsSave
    item is Multiple States.

    Field: PosIncOnly
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if positive displacement increments only are saved. Otherwise it is No.
    This item only applies if the ResultsSave item is Multiple States.

    Field: MaxTotal
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Maximum total number of steps per stage.

    Page 608 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxNull
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Maximum number of null (zero) steps per stage.

    Field: MaxIterCS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Maximum number of constant-stiffness iterations per step.

    Field: MaxIterNR
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Maximum number of Newton-Raphson iterations per step.

    Field: ItConvTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Relative iteration convergence tolerance.

    Field: UseEvStep
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if event-to-event stepping is used. Otherwise it is No.

    Field: EvLumpTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Relative event lumping tolerance.

    Field: LSPerIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Maximum number of line searches per iteration.

    Page 609 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LSTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The line search acceptance tolerance (relative).

    Field: LSStepFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The line search step factor.

    Field: StageSave
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either End of Final Stage, End of Each Stage, Start and End of Each Stage, or
    Two or More Times In Each Stage indicating the results that are saved for the staged
    construction analysis.
    This item only applies for staged construction analysis.

    Field: StageMinIns
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The minimum number of steps used to apply an instantaneous load in a staged
    construction analysis. This item only applies for staged construction analysis when the
    StageSave item is Two or More Times In Each Stage.

    Field: StageMinTD
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The minimum number of steps used for analysis of time dependent items in a staged
    construction analysis. This item only applies for staged construction analysis when the
    StageSave item is Two or More Times In Each Stage.

    Page 610 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameTC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if frame object tension or compression only is considered. Otherwise it is
    No.

    Field: FrameHinge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if frame object tension or compression only is considered. Otherwise it is
    No.

    Field: CableTC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if cable object tension or compression only is considered. Otherwise it is
    No.

    Field: LinkTC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if hook and gap object tension and compression only is considered.
    Otherwise it is No.

    Field: LinkOther
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if other link object nonlinearity is considered. Otherwise it is No. This
    item includes all link nonlinearity not included in the LinkTC item.

    Field: TimeDepMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if specified time dependent material properties are considered. Otherwise
    it is No.
    This item only applies for staged construction analysis.
    Page 611 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TFMaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of iterations per stage for target force iterations.

    Field: TFTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The relative convergence tolerance for target force iterations.

    Field: TFAccelFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The acceleration factor for target force iterations.

    Field: TFNoStop
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if an the analysis is to continue when there is no convergence in the target
    force iterations. Otherwise it is No.
    Table: Case - Static 5 - Nonlinear Stage Definitions

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Stage
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stage number considered.

    Page 612 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Duration
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The duration of the stage in days.

    Field: Output
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if analysis output is to be saved for the stage; otherwise it is No.

    Field: OutputName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The user-specified analysis output name for this stage.

    Field: Comment
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    User comments associated with this stage.
    Table: Case - Static 6 - Nonlinear Stage Data

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Stage
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stage number considered.

    Page 613 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Operation
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Add Structure, Remove Structure, Load Objects, Load Objects If New,
    Change Section, Change Modifiers or Change Releases indicating an operation that is
    performed in the specified stage.
    Load Objects If New means that only the objects that are new to the structure in the
    specified stage, and are specified to be loaded will be loaded. If no objects in the specified
    group are added in the specified stage then no load is applied when using Load Objects If
    New.
    Load Objects means that all objects specified to be loaded will be loaded whether or not
    they were added in the specified stage.

    Field: ObjType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Group, Frame, Cable, Tendon, Area, Solid, Link or Point indicating the type
    of object for which the specified operation is performed.

    Field: ObjName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is the name of the Group, Frame, Cable, Tendon, Area, Solid, Link or Point object
    (depending on the value of the ObjType item) on which the specified operation is
    performed.

    Field: Age
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item only applies when the Operation item is Add Structure. It is the age of the
    added structure, at the time it is added, in days.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies when the Operation item is Load Objects or Load Objects If New.
    It is either Load pattern or Accel indicating the type of load specified.
    Page 614 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies when the Operation item is Load Objects or Load Objects If New.
    Accel UX, UY and UZ imply a uniform acceleration acting in the global X, Y and Z
    directions, respectively. The force applied at each joint is proportional to the mass
    tributary to that joint."
    .

    Field: LoadSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item only applies when the Operation item is Load Objects or Load Objects If New.
    It is a unitless scale factor that multiplies the associated load pattern value.

    Field: TransAccSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    This item only applies when the Operation item is Load Objects or Load Objects If New.
    It is a scale factor (with translational acceleration units) that multiplies the associated
    acceleration value.

    Field: ItemType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies when the Operation item is Change Section, Change Modifiers or
    Change Releases. It is either Frame, Cable, Tendon or Area indicating the object item type
    to which the change applies.
    For operation Change Section, the item types Frame, Cable, Tendon and Area are
    applicable.
    For operation Change Modifiers, the item types Frame, Cable and Tendon are applicable.
    For operation Change Releases, the item type Frame is applicable.
    .

    Page 615 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ItemName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies when the Operation item is Change Section, Change Modifiers or
    Change Releases. For operation Change Section, depending on the value of the ItemType
    item, it is the name of the new frame, cable, tendon, area, solid or link section.
    For operation Change Modifiers, depending on the value of the ItemType item, it is the
    name of the new named frame, cable, or area modifier. For operation Change Releases, it
    is the name of the new named frame release.
    .
    Table: Case - Steady State 1 - General

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Steady State-type load case.

    Field: SolType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Modal or Direct indicating the type of solution.

    Field: FirstFreq
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    This item is the specified first frequency. The analysis is performed for the specified
    FirstFreq and LastFreq and if FreqInc is greater than 1 for intermediate frequencies and for
    any additional frequencies specified that fall between the FirstFreq and the LastFreq.

    Field: LastFreq
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    This item is the specified last frequency. The analysis is performed for the specified
    FirstFreq and LastFreq and if FreqInc is greater than 1 for intermediate frequencies and for
    any additional frequencies specified that fall between the FirstFreq and the LastFreq.

    Page 616 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumFreqInc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the specified number of frequency increments. If this item is set to 1 then the
    analysis is performed for the specified FirstFreq and LastFreq.

    Field: DampingType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Constant or Interpolated indicating the type of hysteretic damping
    specified.

    Field: AddFreqs
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if additional frequencies have been specified. Otherwise it is No.
    Table: Case - Steady State 2 - Load Assignments

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Steady State-type load case.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Load pattern or Accel indicating the type of load specified.

    Field: LoadName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either the name of a load pattern or it is one of Accel U1, Accel U2, Accel U3,
    Accel R1, Accel R2, or Accel R3. The Accel items refer to ground acceleration loads in
    acceleration local coordinates. Note that the acceleration local coordinates are defined by
    the CoordSys and Angle items.

    Page 617 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Function
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a function of frequency versus value items.

    Field: LoadSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a load pattern.

    Field: TransAccSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a translational acceleration.

    Field: RotAccSF
    Field is Imported: Yes
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    Scale factor multiplying the ordinate values of the specified function. This item applies
    when the load item is a rotational acceleration.

    Field: PhaseAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The phase angle in degrees.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Coordinate system used to define the acceleration directions. This item only applies when
    the LoadType item is Accel.

    Page 618 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Coordinate angle between the acceleration local 1 axis and the +X-axis of the coordinate
    system specified by the CoordSys item. The rotation is about the Z-axis of the specified
    coordinate system. This item only applies when the LoadType item is Accel.
    Table: Case - Steady State 3 - Added Frequencies General

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Steady State-type load case.

    Field: AddMFreq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if modal frequencies are added. Otherwise it is No.

    Field: AddMDev
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if modal frequency deviations are added. Otherwise it is No.

    Field: AddSpFreq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if specified frequencies are added. Otherwise it is No.
    Table: Case - Steady State 4 - Added Frequency Deviations

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Steady State-type load case.

    Page 619 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Deviation
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The specified modal deviations. These are specified as a fraction of the frequency value.
    For example a +2% deviation is entered as 0.02 and a -3% deviation is entered as -0.03.
    The specified deviation must be greater than -1.0.
    Table: Case - Steady State 5 - Added Specified Frequencies

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Steady State-type load case.

    Field: Frequency
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The specified frequencies.
    Table: Case - Steady State 6 - Constant Damping

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Steady State-type load case.

    Field: MassCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: 1/Sec2
    The mass proportional coefficient for constant hysteretic damping.

    Field: StiffCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stiffness proportional coefficient for constant hysteretic damping.
    Table: Case - Steady State 7 - Interpolated Damping

    Page 620 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Steady State-type load case.

    Field: FreqUnits
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Hz or RPM indicating the units of the frequency when it is displayed on the
    form. Hz is the same as cycles per second and RPM is revolutions per minute. Note that
    the frequency is always displayed in Hz in the tables.

    Field: Frequency
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The frequency at which the specified mass and stiffness proportional coefficients apply.

    Field: MassCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: 1/Sec2
    The mass proportional coefficient for interpolated hysteretic damping.

    Field: StiffCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stiffness proportional coefficient for interpolated hysteretic damping.
    Table: Combination Definitions

    Field: ComboName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the combination.

    Page 621 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ComboType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Linear Add, Envelope, Abs Add, SRSS or Range Add indicating the type of
    combination.

    Field: AutoDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the combination is an automatic design combination. Otherwise it is
    No.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Linear Static, NonLin Static, Modal, Response Spectrum, Linear Modal
    Hist, NonLin Modal Hist, Linear Dynamic, NonLin Dynamic, Moving Load, Buckling,
    Steady State, or Response Combo indicating the type of the associated load case.

    Field: CaseName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a load case or combination that is included inthe combination.

    Field: ScaleFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A scale factor that is applied to the associated load case for the specified combination.

    Field: SteelDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is Yes if the combination is selected for Steel design. Otherwise it is No.

    Page 622 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ConcDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is Yes if the combination is selected for Concrete design. Otherwise it is No.

    Field: AlumDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is Yes if the combination is selected for Aluminum design. Otherwise it is No.

    Field: ColdDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is Yes if the combination is selected for Cold Formed Steel design. Otherwise it
    is No.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified load combination.

    Field: Notes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    User notes for the specified load combination.
    Table: Connectivity - Area

    Field: Area
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Page 623 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumJoints
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of joints that define the area object.

    Field: Joint1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Use the Joint1, Joint2, Joint3 and Joint4 fields to list the joints defining the area object in
    order either counter-clockwise or clockwise around the object. If the area object has more
    than four joints then use multiple records to list all of the joints. Be sure the the area
    object label is entered for each record associated with the object.

    Field: Joint2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Use the Joint1, Joint2, Joint3 and Joint4 fields to list the joints defining the area object in
    order either counter-clockwise or clockwise around the object. If the area object has more
    than four joints then use multiple records to list all of the joints. Be sure the the area
    object label is entered for each record associated with the object.

    Field: Joint3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Use the Joint1, Joint2, Joint3 and Joint4 fields to list the joints defining the area object in
    order either counter-clockwise or clockwise around the object. If the area object has more
    than four joints then use multiple records to list all of the joints. Be sure the the area
    object label is entered for each record associated with the object.

    Field: Joint4
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Use the Joint1, Joint2, Joint3 and Joint4 fields to list the joints defining the area object in
    order either counter-clockwise or clockwise around the object. If the area object has more
    than four joints then use multiple records to list all of the joints. Be sure the the area
    object label is entered for each record associated with the object.

    Page 624 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Perimeter
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Perimeter of the Area.

    Field: AreaArea
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the area object.

    Field: Volume
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Volume of the area object (area times membrane thickness). This item is only available
    when the analysis model exists.

    Field: CentroidX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global X coordinate of the centroid of the Area.

    Field: CentroidY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Y coordinate of the centroid of the Area.

    Field: CentroidZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Z coordinate of the centroid of the Area.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified area object.
    Page 625 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Connectivity - Cable

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: JointI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint I for the Cable object.

    Field: JointJ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint J for the Cable object.

    Field: Length
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Total length of the cable object.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified cable object.
    Table: Connectivity - Frame

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 626 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JointI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint I for the Frame object.

    Field: JointJ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint J for the Frame object.

    Field: IsCurved
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is yes if the frame object is curved. Otherwise it is No.

    Field: Length
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Total length of the frame object.

    Field: CentroidX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global X coordinate of the centroid of the Frame.

    Field: CentroidY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Y coordinate of the centroid of the Frame.

    Field: CentroidZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Z coordinate of the centroid of the Frame.

    Page 627 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified frame object.
    Table: Connectivity - Link

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Link object.

    Field: JointI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint I for the Link object.

    Field: JointJ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint J for the Link object.

    Field: Length
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Total length of the link object.

    Field: CentroidX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global X coordinate of the centroid of the Link.

    Field: CentroidY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Y coordinate of the centroid of the Link.
    Page 628 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CentroidZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Z coordinate of the centroid of the Link.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified link object.
    Table: Connectivity - Solid

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Field: Joint1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint 1 for the Solid object.

    Field: Joint2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint 2 for the Solid object.

    Field: Joint3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint 3 for the Solid object.

    Field: Joint4
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint 4 for the Solid object.
    Page 629 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Joint5
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint 5 for the Solid object.

    Field: Joint6
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint 6 for the Solid object.

    Field: Joint7
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint 7 for the Solid object.

    Field: Joint8
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint 8 for the Solid object.

    Field: Volume
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Total volume of the solid object.

    Field: CentroidX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global X coordinate of the centroid of the Solid.

    Field: CentroidY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Y coordinate of the centroid of the Solid.

    Page 630 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CentroidZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Z coordinate of the centroid of the Solid.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified solid object.
    Table: Connectivity - Tendon

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Field: JointI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint I for the Tendon object.

    Field: JointJ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of joint J for the Tendon object.

    Field: Length
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Total length of the tendon object.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified tendon object.
    Page 631 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Constraint Definitions - Beam

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a Beam constraint.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the coordinate system in which th Beam constraint is defined.

    Field: Axis
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Axis in the specified coordinate system that is parallel to the axis of the Beam constraint.
    This may be X, Y, Z or Auto. If Auto then the axis is automatically determined from the
    joints assigned to the constraint.
    Table: Constraint Definitions - Body

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a Body constraint.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the coordinate system in which th Body constraint is defined.

    Field: UX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF UX is constrained. Otherwise it is No.

    Page 632 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF UY is constrained. Otherwise it is No.

    Field: UZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF UZ is constrained. Otherwise it is No.

    Field: RX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF RX is constrained. Otherwise it is No.

    Field: RY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF RY is constrained. Otherwise it is No.

    Field: RZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF RZ is constrained. Otherwise it is No.
    Table: Constraint Definitions - Bridge Object Flags

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a constraint.

    Field: Type
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of constraint.
    Page 633 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the constraint is automatically created from a bridge object. Otherwise
    it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this constraint is associated.

    Field: BOSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object with which this constraint is associated.
    Table: Constraint Definitions - Diaphragm

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a Diaphragm constraint.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the coordinate system in which th Diaphragm constraint is defined.

    Field: Axis
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Axis in the specified coordinate system that is perpendicular to the plane of the Diaphragm
    constraint. This may be X, Y, Z or Auto. If Auto then the axis is automatically determined
    from the joints assigned to the constraint.

    Page 634 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MultiLevel
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No.
    If this item is Yes, then when the diaphragm constraint is assigned to selected joints using
    the Assign menu > Joint > Constraints command the program automatically creates new
    diaphragm constraint assignments at each different Z level among the selected joints. The
    Z level is determined in the constraint coordinate system.
    The new diaphragms constraint names have a prefix of the original diaphragm name and a
    suffix of the elevation. The elevation portion of the name is in the database units for the
    model, that is the units in which the model was created.
    Each selected point is assigned the diaphragm constraint for its Z elevation. The net result
    is a series of diaphragm assignments at different Z elevations.
    Note that this special multilevel assignment only works when the constraint assignment is
    made using the Assign menu > Joint > Constraints command. Any multilevel assignment
    made through the database is ignored and an error message is generated in the import log.
    Table: Constraint Definitions - Equal

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a Equal constraint.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the coordinate system in which th Equal constraint is defined.

    Field: UX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF UX is constrained. Otherwise it is No.

    Page 635 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF UY is constrained. Otherwise it is No.

    Field: UZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF UZ is constrained. Otherwise it is No.

    Field: RX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF RX is constrained. Otherwise it is No.

    Field: RY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF RY is constrained. Otherwise it is No.

    Field: RZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF RZ is constrained. Otherwise it is No.
    Table: Constraint Definitions - Line

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a Line constraint.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the coordinate system in which th Body constraint is defined.
    Page 636 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF UX is constrained. Otherwise it is No.

    Field: UY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF UY is constrained. Otherwise it is No.

    Field: UZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF UZ is constrained. Otherwise it is No.

    Field: RX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF RX is constrained. Otherwise it is No.

    Field: RY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF RY is constrained. Otherwise it is No.

    Field: RZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF RZ is constrained. Otherwise it is No.
    Table: Constraint Definitions - Local

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a Local constraint.
    Page 637 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF U1 is constrained. Otherwise it is No.

    Field: U2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF U2 is constrained. Otherwise it is No.

    Field: U3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF U3 is constrained. Otherwise it is No.

    Field: R1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF R1 is constrained. Otherwise it is No.

    Field: R2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF R2 is constrained. Otherwise it is No.

    Field: R3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF R3 is constrained. Otherwise it is No.
    Table: Constraint Definitions - Plate

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a Plate constraint.
    Page 638 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the coordinate system in which th Plate constraint is defined.

    Field: Axis
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Axis in the specified coordinate system that is perpendicular to the plane of the Plate
    constraint. This may be X, Y, Z or Auto. If Auto then the axis is automatically determined
    from the joints assigned to the constraint.
    Table: Constraint Definitions - Rod

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a Rod constraint.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the coordinate system in which th Rod constraint is defined.

    Field: Axis
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Axis in the specified coordinate system that is parallel to the axis of the Rod constraint.
    This may be X, Y, Z or Auto. If Auto then the axis is automatically determined from the
    joints assigned to the constraint.
    Table: Constraint Definitions - Weld

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a Weld constraint.

    Page 639 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the coordinate system in which th Weld constraint is defined.

    Field: UX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF UX is constrained. Otherwise it is No.

    Field: UY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF UY is constrained. Otherwise it is No.

    Field: UZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF UZ is constrained. Otherwise it is No.

    Field: RX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF RX is constrained. Otherwise it is No.

    Field: RY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF RY is constrained. Otherwise it is No.

    Field: RZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if DOF RZ is constrained. Otherwise it is No.

    Page 640 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Tolerance
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance tolerance for the weld constraint. All joints within this distanceof each other
    are "welded", that is, they are constrained by an internal body constraint.
    Table: Coordinate Systems

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a coordinate system.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Cartesian, Cylindrical or General indicating the type of coordinate
    system.

    Field: X
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global X-coordinate of the origin of the coordinate system specified.

    Field: Y
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Y-coordinate of the origin of the coordinate system specified.

    Field: Z
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Z-coordinate of the origin of the coordinate system specified.

    Page 641 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AboutZ
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The rotation of a coordinate system relative to the global coordinate system is defined as
    follows: (1) Rotate the coordinate system about the positive global Z-axis as defined by
    the AboutZ item. (2) Rotate the coordinate system about the positive global Y-axis as
    defined by the AboutY item. (3) Rotate the coordinate system about the positive global Xaxis as defined by the AboutY item. Note that the order in which these rotations are
    performed is important.

    Field: AboutY
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The rotation of a coordinate system relative to the global coordinate system is defined as
    follows: (1) Rotate the coordinate system about the positive global Z-axis as defined by
    the AboutZ item. (2) Rotate the coordinate system about the positive global Y-axis as
    defined by the AboutY item. (3) Rotate the coordinate system about the positive global Xaxis as defined by the AboutY item. Note that the order in which these rotations are
    performed is important.

    Field: AboutX
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The rotation of a coordinate system relative to the global coordinate system is defined as
    follows: (1) Rotate the coordinate system about the positive global Z-axis as defined by
    the AboutZ item. (2) Rotate the coordinate system about the positive global Y-axis as
    defined by the AboutY item. (3) Rotate the coordinate system about the positive global Xaxis as defined by the AboutY item. Note that the order in which these rotations are
    performed is important.
    Table: Database Documentation

    Field: TableKey
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The table name key. This key is used internally by the program and CAN NOT be
    changed by the user.

    Page 642 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TableName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the database table as it appears in the database and in the printed output.

    Field: FieldKey
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The field name key. This key is used internally by the program and CAN NOT be
    changed by the user.

    Field: FieldName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the database field as it appears in the database and in the printed output.

    Field: Description
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Description of a field in the associated database table.

    Field: FieldFormat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The format type associated with the field.

    Field: FieldImport
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the field is imported. Otherwise it is No.

    Page 643 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FieldRepeat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If the table needs to be broken up when printed, then if this item is Yes the associated field
    will be repeated.

    Field: FieldGroup
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Fields with the same group number are typically printed together in the printed output.

    Field: TableType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Input, Documentation or Output indicating the type of table.

    Field: TableArea
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The area of the Database Tables form which includes the check box that activates display
    of the associated table.

    Field: TableChkBox
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The check box that activates display of the associated table.
    Table: Database Field Names

    Field: TableName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The table name.

    Page 644 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FieldKey
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The field name key. This key is used internally by the program and CAN NOT be
    changed by the user.

    Field: FieldName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the database field as it appears in the database.
    Table: Database Format Types

    Field: FormatType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Type of item as specified in the Program Default Database Number Formatting Options
    form which is accessed using the Options menu > Database > Set Program Default DB
    Formatting command.

    Field: Units
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The units specified in the Database Display Format Form for the item.

    Field: DecPlaces
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of decimal places specified in the Database Display Format Form for the
    item.

    Field: MinSigFig
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The minimum number of significant figures specified in the Database Display Format
    Form for the item.

    Page 645 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ZeroTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The zero tolerance specified in the Database Display Format Form for the item.

    Field: AlwaysE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The value specified for the Always Use E Format item in the Database Display Format
    Form for the item.

    Field: ConvFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The units conversion factor. Multiplying the value in the database table by this factor
    gives the value in the units specified in the Units field.

    Field: UnitsCurr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the database data is always displayed in the current units. Otherwise it
    is No.

    Field: OverrideE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the program is not to automatically convert to E format when the
    specified value is too small to display with the specified number of significant figures and
    decimal places. Otherwise it is No.
    When this item is Yes a value too small to display with the specified number of significant
    figures and decimal places is displayed with less significant figures and decimal places. If
    the value is smaller than 1 / (10 ^ NumDecimalPlaces) / 2, then it is reported as zero,
    regardless of the specified zero tolerance. If the value is greater than 1 / (10 ^
    NumDecimalPlaces) / 2 but less than 1 / (10 ^ NumDecimalPlaces) then it is reported as
    1 / (10 ^ NumDecimalPlaces).
    Table: Database Table Names

    Page 646 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TableKey
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The table name key. This key is used internally by the program and CAN NOT be
    changed by the user.

    Field: TableName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the database table as it appears in the database.
    Table: Frame Added Mass Assignments

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: MassPerLen
    Field is Imported: Yes
    Format: Mass/Length (Mass and Weight section of form)
    Units: Force-Sec2/Length2
    Added mass per unit length applied to the object.
    Table: Frame Auto Mesh Assignments

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: AutoMesh
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the frame object is to be (internally) automatically meshed by the
    program for analysis.

    Page 647 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AtJoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if automatic subdivision is to occur at intermediate joints along the frame
    object.

    Field: AtFrames
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if automatic subdivision is to occur at intersections with other frame
    objects, area object edges or solid object edges.

    Field: NumSegments
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The minimum number of segments that the frame is to be divided into. If this item is zero
    then it does not apply.

    Field: MaxLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The maximum length of segments that the frame is to be divided into. If this item is zero
    then it does not apply.

    Field: MaxDegrees
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The maximum number of degrees that segments of curved frame members are to be
    divided into. If this item is zero then it does not apply.
    Table: Frame Bridge Object Flags

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 648 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the frame object is automatically created from a bridge object.
    Otherwise it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this frame object is associated.

    Field: BOSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object with which this frame object is associated.

    Field: BOItemType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Span, Bent, Abutment, Hinge, Restrainer, Tendon, Diaphragm, Girder,
    Flange(for steel girder) or Internal Diaphragm(for steel U girder) indicating the portion of
    the bridge object with which this frame object is associated.

    Field: BOBent
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge bent with which this frame object is associated. This item is only
    applicable if the BOItemType is Bent.

    Field: BOBentCol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The column number in the bridge bent with which this frame object is associated. This
    item is only applicable if the BOItemType is Bent and the frame object represents a
    column in the bent.

    Page 649 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BOEndI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the bridge object starts at the I-End of the frame object. Otherwise it is
    No.

    Field: BOEndJ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the bridge object ends at the J-End of the frame object. Otherwise it is
    No.

    Field: BOSpanEndI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the bridge object span indicated by the BOSpan item starts at the I-End
    of the frame object.

    Field: BOSpanEndJ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the bridge object span indicated by the BOSpan item ends at the J-End
    of the frame object.

    Field: StartSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The station along the bridge object at which the specified frame starts.

    Field: EndSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The station along the bridge object at which the specified frame ends.
    Table: Frame Curve Data

    Page 650 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: CurveType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following curve types:
    Circular Arc - 3rd Point Coords,
    Circular Arc - Planar Point & Radius, or
    Parabolic Arc - 3rd Point Coords.

    Field: NumSegs
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of straight-line segments used to define the curve.

    Field: XGlobal
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the third point.

    Field: YGlobal
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the third point.

    Field: ZGlobal
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the third point.

    Page 651 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Radius
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The circular curve radius. This item only applies when the curve type is Circular Arc Planar Point & Radius.
    Table: Frame Design Bracing - Point

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Top, Bottom or All indicating if the top flange, bottom flange or both flanges
    of the frame object are braced.

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.

    Field: RelDist
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The specified relative distance from the I-end of the object to the brace point location.
    The relative distance is equal to the absolute distance divided by the beam length.

    Field: AbsDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the brace point location.
    Table: Frame Design Bracing - Uniform

    Page 652 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Top, Bottom or All indicating if the top flange, bottom flange or both flanges
    of the frame object are braced.

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.

    Field: RelDistA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The specified relative distance from the I-end of the object to the start of the uniform
    braceing. The relative distance is equal to the absolute distance divided by the beam
    length.

    Field: RelDistB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The specified relative distance from the I-end of the object to the end of the uniform
    braceing. The relative distance is equal to the absolute distance divided by the beam
    length.

    Field: AbsDistA
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the start of the uniform
    braceing.

    Page 653 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AbsDistB
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the start of the uniform
    braceing.
    Table: Frame Design Procedures

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignProc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either From Material or No Design indicating the design procedure for the frame
    object.
    Table: Frame End Skew Angle Assignments

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: SkewI
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle in degrees measured counterclockwise from the positive local 3-axis to a line
    parallel to the I-End of the frame object. (-90 < SkewI < 90).

    Field: SkewJ
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle in degrees measured counterclockwise from the positive local 3-axis to a line
    parallel to the J-End of the frame object. (-90 < SkewJ < 90).
    Table: Frame Fireproofing Assignments

    Page 654 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Sprayed (Auto Perimeter), Sprayed (User Perimeter), or Concrete Encased
    indicating the fireproofing type.

    Field: Thickness
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    For sprayed fireproofing types this is the thickness of the fireproofing which is assumed to
    be constant on all surfaces. For concrete encasement fireproofing this is the concrete
    cover for the section.

    Field: UserPerim
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the Type item is Sprayed (User Perimeter). It is the total
    length of fireproofing applied around the perimeter of the section cross-sectional area. It is
    measured at the centerline of the fireproofing thickness.

    Field: TopFlange
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item only applies when the Type item is Sprayed (Auto Perimeter) or Concrete
    Encased. It is Yes if fireproofing is applied to the top flange of the section, otherwise it is
    No.

    Field: Density
    Field is Imported: Yes
    Format: Weight/Volume (Mass and Weight section of form)
    Units: Force/Length3
    The weight per unit volume of the fireproofing material.

    Page 655 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WtPerLen
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The program calculated weight per unit length (along the frame object) of the fireproofing
    material.

    Field: SelfWt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the fireproofing is included in the frame object self weight. Otherwise
    it is No.

    Field: GravLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the fireproofing is included in gravity loads assigned to the frame
    object. Otherwise it is No.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either None or the name of an existing load pattern to which the fireprooofing
    will be applied as a distributed line load.
    Table: Frame Hinge Assigns 01 - Overview

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: AssignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is the type of hinge assigned to the specified object.

    Page 656 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This item applies when the AssignType item is User-defined. It is the name of the user
    defined hinge property assigned to the specified object.

    Field: HingeTable
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This item applies to Auto FEMA356 hinges. It is the FEMA356 table used to create the
    auto hinge property.

    Field: GenHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the hinge property generated by the program based on the assigned hinge
    property.

    Field: RelDist
    Field is Imported: No
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the hinge location. The
    relative distance is equal to the absolute distance divided by the beam length.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: AbsDist
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the hinge location.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Page 657 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ActualDist
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The actual distance from the I-End of the object to the hinge location that the program will
    use.
    Typically the ActualDist item is the same as the AbsDist item, however, if you specified
    that the hinge falls on the end length offset of the object, then the ActualDist and AbsDist
    items will be different. If you specify a hinge that falls on the end length offsets at the
    ends of the object, then the program automatically relocates the hinge at the inside face of
    the end offset.

    Field: OverWrites
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Thhis item is Yes if hinge overwrites are specified for the considered hinge. Otherwise it
    is No.
    Table: Frame Hinge Assigns 02 - User Defined Properties

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: AssignProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the user defined hinge property assigned to the specified object.

    Field: GenHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the hinge property generated by the program based on the assigned hinge
    property.

    Page 658 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.

    Field: RelDist
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the hinge location. The
    relative distance is equal to the absolute distance divided by the beam length.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: AbsDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the hinge location.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: ActualDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The actual distance from the I-End of the object to the hinge location that the program will
    use.
    Typically the ActualDist item is the same as the AbsDist item, however, if you specified
    that the hinge falls on the end length offset of the object, then the ActualDist and AbsDist
    items will be different. If you specify a hinge that falls on the end length offsets at the
    ends of the object, then the program automatically relocates the hinge at the inside face of
    the end offset.
    Table: Frame Hinge Assigns 03 - Auto Caltrans - Flexural Hinge

    Page 659 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: GenHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the hinge property generated by the program based on the assigned hinge
    property.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either M2, M3, M2-M3, P-M2, P-M3 or P-M2-M3 indicating the degrees of
    freedom for the hinge.

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies when the DOF item is P-M2, P-M3 or P-M2-M3. It is only imported for
    P-M2-M3. It is always 2 for P-M2 and P-M3.
    This is the total number of PM curves used to define the interaction surface for the hinge.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies when the DOF item is M2-M3, P-M2, P-M3 or P-M2-M3.
    When the DOF item is M2-M3 this is the total number of M2-M3 points on the hinge
    interaction surface.
    When the DOF item is P-M2, P-M3 or P-M2-M3 this is the maximum number points on
    each PM curve of the hinge interaction surface.
    .

    Page 660 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item applies when the DOF item is M2, M3 or M2-M3.
    It is either Case or User indicating the source of the axial load for which the hinge is
    defined. Case means that the axial load is taken from the results obtained for a specified
    load case or load combination. User means the axial load is specified by the user.

    Field: PCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item applies when the DOF item is M2, M3 or M2-M3 and the PFrom item is Case.
    This is the name of a load case or load combination whose result gives the axial load for
    which the hinge is defined.

    Field: PUser
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item applies when the DOF item is M2, M3 or M2-M3 and the PFrom item is User.
    This is the user specified axial load for which the hinge is defined.

    Field: HingeLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The length of the hinge.

    Field: Idealized
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the hine moment curvature behavior is idealized as a bilinear curve.
    Otherwise it is No.

    Page 661 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeyondE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is To Zero or Extrapolated, indicating the force deformation behavior of the
    hinge beyond point E.

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.

    Field: RelDist
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the hinge location. The
    relative distance is equal to the absolute distance divided by the beam length.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: AbsDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the hinge location.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: ActualDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The actual distance from the I-End of the object to the hinge location that the program will
    use.
    Typically the ActualDist item is the same as the AbsDist item, however, if you specified
    that the hinge falls on the end length offset of the object, then the ActualDist and AbsDist
    items will be different. If you specify a hinge that falls on the end length offsets at the

    Page 662 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    ends of the object, then the program automatically relocates the hinge at the inside face of
    the end offset.
    Table: Frame Hinge Assigns 04 - Auto FEMA 356 - Concrete Beam

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: GenHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the hinge property generated by the program based on the assigned hinge
    property.

    Field: CompType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Primary or Secondary indicating the component type.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either M2 or M3 indicating the degree of freedom considered.

    Field: VFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    It is either Case or User indicating the source of the shear load for which the hinge is
    defined. Case means that the shear load is taken from the results obtained for a specified
    load case or load combination. User means the shear load is specified by the user.

    Field: VCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item applies when the VFrom item is Case.

    Page 663 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    This is the name of a load case or load combination whose result gives the shear load for
    which the hinge is defined.

    Field: VUser
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item applies when the VFrom item is User.
    This is the user specified shear load for which the hinge is defined.

    Field: Conforming
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the transverse reinforcing is conforming as defined in FEMA 356 Table
    considered. Otherwise it is No.

    Field: RatioFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    It is either Design or User indicating the source of the reinforcing ratio (p - p') / pbalanced.
    Design means that the reinforcing ratio is taken from the current design results. User
    means the reinforcing ratio is specified by the user.

    Field: RatioUser
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item applies when the RatioFrom item is User.
    This is the user specified reinforcing ratio for positive bending.

    Field: BeyondE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is To Zero or Extrapolated, indicating the force deformation behavior of the
    hinge beyond point E.

    Page 664 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.

    Field: RelDist
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the hinge location. The
    relative distance is equal to the absolute distance divided by the beam length.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: AbsDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the hinge location.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: ActualDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The actual distance from the I-End of the object to the hinge location that the program will
    use.
    Typically the ActualDist item is the same as the AbsDist item, however, if you specified
    that the hinge falls on the end length offset of the object, then the ActualDist and AbsDist
    items will be different. If you specify a hinge that falls on the end length offsets at the
    ends of the object, then the program automatically relocates the hinge at the inside face of
    the end offset.
    Table: Frame Hinge Assigns 05 - Auto FEMA 356 - Concrete Column

    Page 665 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: GenHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the hinge property generated by the program based on the assigned hinge
    property.

    Field: CompType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Primary or Secondary indicating the component type.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either M2, M3, M2-M3, P-M2, P-M3 or P-M2-M3 indicating the degrees of
    freedom for the hinge.

    Field: PandVFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    It is either Case or User indicating the source of the shear and axial loads for which the
    hinge is defined. Case means that the loads are taken from the results obtained for a
    specified load case or load combination. User means the loads are specified by the user.

    Field: PandVCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item applies when the PandVFrom item is Case.
    This is the name of a load case or load combination whose result gives the loads for which
    the hinge is defined.

    Page 666 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PUser
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item applies when the PandVFrom item is User.
    This is the user specified axial load for which the hinge is defined.

    Field: V2User
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item applies when the PandVFrom item is User.
    This is the user specified shear load in the local 2-axis direction of the object for which the
    hinge is defined.

    Field: V3User
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item applies when the PandVFrom item is User.
    This is the user specified shear load in the local 3-axis direction of the object for which the
    hinge is defined.

    Field: Conforming
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the transverse reinforcing is conforming as defined in FEMA 356 Table
    considered. Otherwise it is No.

    Field: BeyondE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is To Zero or Extrapolated, indicating the force deformation behavior of the
    hinge beyond point E.

    Page 667 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.

    Field: RelDist
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the hinge location. The
    relative distance is equal to the absolute distance divided by the beam length.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: AbsDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the hinge location.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: ActualDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The actual distance from the I-End of the object to the hinge location that the program will
    use.
    Typically the ActualDist item is the same as the AbsDist item, however, if you specified
    that the hinge falls on the end length offset of the object, then the ActualDist and AbsDist
    items will be different. If you specify a hinge that falls on the end length offsets at the
    ends of the object, then the program automatically relocates the hinge at the inside face of
    the end offset.
    Table: Frame Hinge Assigns 06 - Auto FEMA 356 - Steel Beam

    Page 668 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: GenHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the hinge property generated by the program based on the assigned hinge
    property.

    Field: CompType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Primary or Secondary indicating the component type.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either M2 or M3 indicating the degree of freedom considered.

    Field: BeyondE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is To Zero or Extrapolated, indicating the force deformation behavior of the
    hinge beyond point E.

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.

    Page 669 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RelDist
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the hinge location. The
    relative distance is equal to the absolute distance divided by the beam length.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: AbsDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the hinge location.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: ActualDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The actual distance from the I-End of the object to the hinge location that the program will
    use.
    Typically the ActualDist item is the same as the AbsDist item, however, if you specified
    that the hinge falls on the end length offset of the object, then the ActualDist and AbsDist
    items will be different. If you specify a hinge that falls on the end length offsets at the
    ends of the object, then the program automatically relocates the hinge at the inside face of
    the end offset.
    Table: Frame Hinge Assigns 07 - Auto FEMA 356 - Steel Column

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 670 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GenHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the hinge property generated by the program based on the assigned hinge
    property.

    Field: CompType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Primary or Secondary indicating the component type.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either M2, M3, M2-M3, P-M2, P-M3 or P-M2-M3 indicating the degrees of
    freedom for the hinge.

    Field: PFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item applies when the DOF item is M2, M3 or M2-M3.
    It is either Case or User indicating the source of the axial load for which the hinge is
    defined. Case means that the axial load is taken from the results obtained for a specified
    load case or load combination. User means the axial load is specified by the user.

    Field: PCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item applies when the DOF item is M2, M3 or M2-M3 and the VFrom item is Case.
    This is the name of a load case or load combination whose result gives the axial load for
    which the hinge is defined.

    Page 671 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PUser
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item applies when the DOF item is M2, M3 or M2-M3 and the VFrom item is User.
    This is the user specified axial load for which the hinge is defined.

    Field: DropLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if force controlled hinges created as a result of this assignment are to lose
    all load-carrying capacity when their maximum load is reached. Otherwise it is No.

    Field: BeyondE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is To Zero or Extrapolated, indicating the force deformation behavior of the
    hinge beyond point E.

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.

    Field: RelDist
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the hinge location. The
    relative distance is equal to the absolute distance divided by the beam length.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Page 672 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AbsDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the hinge location.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: ActualDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The actual distance from the I-End of the object to the hinge location that the program will
    use.
    Typically the ActualDist item is the same as the AbsDist item, however, if you specified
    that the hinge falls on the end length offset of the object, then the ActualDist and AbsDist
    items will be different. If you specify a hinge that falls on the end length offsets at the
    ends of the object, then the program automatically relocates the hinge at the inside face of
    the end offset.
    Table: Frame Hinge Assigns 08 - Auto FEMA 356 - Steel Brace

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: GenHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the hinge property generated by the program based on the assigned hinge
    property.

    Field: CompType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Primary or Secondary indicating the component type.

    Page 673 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeyondE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is To Zero or Extrapolated, indicating the force deformation behavior of the
    hinge beyond point E.

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.

    Field: RelDist
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the hinge location. The
    relative distance is equal to the absolute distance divided by the beam length.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: AbsDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the hinge location.
    If you specify a hinge that falls on the end length offsets at the ends of the object, then the
    program automatically relocates the hinge at the inside face of the end offset.

    Field: ActualDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The actual distance from the I-End of the object to the hinge location that the program will
    use.
    Typically the ActualDist item is the same as the AbsDist item, however, if you specified
    that the hinge falls on the end length offset of the object, then the ActualDist and AbsDist
    items will be different. If you specify a hinge that falls on the end length offsets at the

    Page 674 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    ends of the object, then the program automatically relocates the hinge at the inside face of
    the end offset.
    Table: Frame Hinge Assigns 09 - Hinge Overwrites

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: AutoDivide
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the specified frame object is to be automatically divided (meshed at
    analysis time) at the hinge location. Otherwise it is No.
    The meshing creates elements on eeach side of the hinge whose length is specified by the
    RelLength item.

    Field: RelLength
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AutoDivide item is Yes.
    It is the relative of length of new elements created as a result of automatic meshing on
    each side of the hinge at analysis time.

    Field: NoLoadDrop
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the load in a hinge is never allowed to drop. Otherwise it is No.
    Table: Frame Insertion Point Assignments

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 675 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CardinalPt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The cardinal point for the object. This item defines the relative position of the object
    section on the line representing the frame/cable object. It may be any one of the
    following:
    1 (bottom left),
    2 (bottom center),
    3 (bottom right),
    4 (middle left),
    5 (middle center),
    6 (middle right),
    7 (top left),
    8 (top center),
    9 (top right),
    10 (centroid), and
    11 (shear center).
    Note that the numbers 1 through 10 are analogous to those specified for the cardinal point
    in Intergraph FrameWorks.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system in which the joint offsets are defined.

    Field: JtOffsetXI
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The rigid frame joint offset in the X (1) direction at the I-end of the frame object. A
    positive offset is measured from the joint location to the end of the frame object (at the
    cardinal point) in the positive direction of the specified coordinate system.

    Field: JtOffsetYI
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The rigid frame joint offset in the Y (2) direction at the I-end of the frame object. A
    positive offset is measured from the joint location to the end of the frame object (at the
    cardinal point) in the positive direction of the specified coordinate system.

    Page 676 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JtOffsetZI
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The rigid frame joint offset in the Z (3) direction at the I-end of the frame object. A
    positive offset is measured from the joint location to the end of the frame object (at the
    cardinal point) in the positive direction of the specified coordinate system.

    Field: JtOffsetXJ
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The rigid frame joint offset in the X (1) direction at the J-end of the frame object. A
    positive offset is measured from the joint location to the end of the frame object (at the
    cardinal point) in the positive direction of the specified coordinate system.

    Field: JtOffsetYJ
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The rigid frame joint offset in the Y (2) direction at the J-end of the frame object. A
    positive offset is measured from the joint location to the end of the frame object (at the
    cardinal point) in the positive direction of the specified coordinate system.

    Field: JtOffsetZJ
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The rigid frame joint offset in the Z (3) direction at the J-end of the frame object. A
    positive offset is measured from the joint location to the end of the frame object (at the
    cardinal point) in the positive direction of the specified coordinate system.

    Field: Mirror2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the section assigned to the line object is assumed to be mirrored about
    its own local 2-axis. Otherwise it is No.

    Page 677 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mirror3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the section assigned to the line object is assumed to be mirrored about
    its own local 3-axis. Otherwise it is No.

    Field: Transform
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the frame stiffness is transformed for offsets (cardinal point offset or
    joint offset) from it centroid. Otherwise it is No.
    Table: Frame Joint Offsets - Bridge Object Flags

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the frame object joint offset is automatically created from a bridge
    object. Otherwise it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this frame object is associated.

    Field: BOSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object with which this frame object is associated.
    Table: Frame Loads - Deformation

    Page 678 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: IncludeU1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the U1 degree of freedom. Otherwise it is
    No.

    Field: IncludeU2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the U2 degree of freedom. Otherwise it is
    No.

    Field: IncludeU3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the U3 degree of freedom. Otherwise it is
    No.

    Field: IncludeR1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the R1 degree of freedom. Otherwise it is
    No.

    Page 679 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IncludeR2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the R2 degree of freedom. Otherwise it is
    No.

    Field: IncludeR3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the R3 degree of freedom. Otherwise it is
    No.

    Field: U1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item is the deformation specified for the U1 degree of freedom.

    Field: U2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item is the deformation specified for the U2 degree of freedom.

    Field: U3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item is the deformation specified for the U3 degree of freedom.

    Field: R1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the deformation specified for the R1 degree of freedom.

    Page 680 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the deformation specified for the R2 degree of freedom.

    Field: R3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the deformation specified for the R3 degree of freedom.
    Table: Frame Loads - Distributed

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the load is defined. Local means that the load is
    specified in an object local axis direction.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Force or Moment indicating the type of load assigned.

    Page 681 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 1, 2, 3, X, Y, Z, X Proj, Y Proj, Z Proj, Gravity or Grav Proj indicating the
    direction of the load. 1, 2 and 3 indicate the local axes directions of the frame object. X,
    Y and Z indicate the X, Y and Z directions of the specified coordinate system. Gravity is
    in the negative global Z direction. X Proj, Y Proj or Z Proj are projected forces in the
    specified coordinate system. Projected forces are scaled by the sine of the angle between
    the IncludeMoments object and the direction of load. Projected moments are scaled by the
    cosine of the angle between the frame object and the direction of load.

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.

    Field: RelDistA
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the starting point of the load
    segment considered. The relative distance is equal to the absolute distance divided by the
    beam length.

    Field: RelDistB
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the ending point of the load
    segment considered. The relative distance is equal to the absolute distance divided by the
    beam length.

    Field: AbsDistA
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the starting point of the load
    segment considered.

    Page 682 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AbsDistB
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the ending point of the load
    segment considered.

    Field: FOverLA
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The force intensity at the starting point of the load segment considered.

    Field: FOverLB
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The force intensity at the ending point of the load segment considered.

    Field: MOverLA
    Field is Imported: Yes
    Format: Moment/Length (Forces section of form)
    Units: Force-Length/Length
    The moment intensity at the starting point of the load segment considered.

    Field: MOverLB
    Field is Imported: Yes
    Format: Moment/Length (Forces section of form)
    Units: Force-Length/Length
    The moment intensity at the ending point of the load segment considered.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified distributed load.
    Table: Frame Loads - Gravity

    Page 683 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the gravity loads are defined.

    Field: MultiplierX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the X-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.

    Field: MultiplierY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the Y-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.

    Field: MultiplierZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the Z-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.
    Table: Frame Loads - Open Structure Wind

    Page 684 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: LoadPat
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the load is defined. Local means that the load is
    specified in an object local axis direction.

    Field: Type
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Force or Moment indicating the type of load assigned.

    Field: Dir
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 1, 2, 3, X, Y, Z, X Proj, Y Proj, Z Proj, Gravity or Grav Proj indicating the
    direction of the load. 1, 2 and 3 indicate the local axes directions of the frame object. X,
    Y and Z indicate the X, Y and Z directions of the specified coordinate system. Gravity is
    in the negative global Z direction. X Proj, Y Proj or Z Proj are projected forces in the
    specified coordinate system. Projected forces are scaled by the sine of the angle between
    the IncludeMoments object and the direction of load. Projected moments are scaled by the
    cosine of the angle between the frame object and the direction of load.

    Field: DistType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.
    Page 685 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RelDistA
    Field is Imported: No
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the starting point of the load
    segment considered. The relative distance is equal to the absolute distance divided by the
    beam length.

    Field: RelDistB
    Field is Imported: No
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the ending point of the load
    segment considered. The relative distance is equal to the absolute distance divided by the
    beam length.

    Field: AbsDistA
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the starting point of the load
    segment considered.

    Field: AbsDistB
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the ending point of the load
    segment considered.

    Field: FOverLA
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The force intensity at the starting point of the load segment considered.

    Field: FOverLB
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The force intensity at the ending point of the load segment considered.
    Table: Frame Loads - Point

    Page 686 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the load is defined. Local means that the load is
    specified in an object local axis direction.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Force or Moment indicating the type of load assigned.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 1, 2, 3, X, Y, Z or Gravity indicating the direction of the load. 1, 2 and 3
    indicate the local axes directions of the object. X, Y and Z indicate the X, Y and Z
    directions of the specified coordinate system. Gravity is in the negative global Z direction.

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.

    Page 687 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RelDist
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified relative distance from the I-end of the object to the load location. The
    relative distance is equal to the absolute distance divided by the beam length.

    Field: AbsDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the load location.

    Field: Force
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The point force applied at the specified location along the object.

    Field: Moment
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The point moment applied at the specified location along the object.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified point load.
    Table: Frame Loads - Strain

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 688 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The line object local component to which the specified strain load is applied. This is
    either Strain11, Strain12, Strain13, Curvature1, Curvature2 or Curvature3.

    Field: Strain
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strain load applied to the specified component of the object.

    Field: Curvature
    Field is Imported: Yes
    Format: 1/Length (Miscellaneous section of form)
    Units: 1/Length
    The strain load (curvature) applied to the specified component of the object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified strain or curvature. If
    no joint pattern is specified then this item is reported as None.
    Table: Frame Loads - Target Force

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 689 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: IncludeP
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the P degree of freedom. Otherwise it is
    No.

    Field: IncludeV2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the V2 degree of freedom. Otherwise it is
    No.

    Field: IncludeV3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the V3 degree of freedom. Otherwise it is
    No.

    Field: IncludeT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the T degree of freedom. Otherwise it is
    No.

    Field: IncludeM2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the M2 degree of freedom. Otherwise it is
    No.

    Page 690 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IncludeM3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the M3 degree of freedom. Otherwise it is
    No.

    Field: P
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item is the target force specified for the P degree of freedom.

    Field: V2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item is the target force specified for the V2 degree of freedom.

    Field: V3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item is the target force specified for the V3 degree of freedom.

    Field: T
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    This item is the target force specified for the T degree of freedom.

    Field: M2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    This item is the target force specified for the M2 degree of freedom.

    Field: M3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    This item is the target force specified for the M3 degree of freedom.
    Page 691 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RelLocP
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the P
    degree of freedom is located.

    Field: RelLocV2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the
    V2 degree of freedom is located.

    Field: RelLocV3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the
    V3 degree of freedom is located.

    Field: RelLocT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the T
    degree of freedom is located.

    Field: RelLocM2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the
    M2 degree of freedom is located.

    Field: RelLocM3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the
    M3 degree of freedom is located.
    Table: Frame Loads - Temperature

    Page 692 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Temperature, Gradient2, or Gradient3 indicating the type of temperature
    load applied to the object.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature Change (Forces section of form)
    Units: Temp
    temperature Label of the load pattern to which the specified auto seismic load applies
    Frame object.

    Field: TempGrad2
    Field is Imported: Yes
    Format: Temperature Gradient (Forces section of form)
    Units: Temp/Length
    temperature gradient in the local 2 direction (units are delta temperature/thickness 2-2)
    Label of the load pattern to which the specified auto seismic load applies object.

    Field: TempGrad3
    Field is Imported: Yes
    Format: Temperature Gradient (Forces section of form)
    Units: Temp/Length
    temperature gradient in the local 3 direction (units are delta temperature/thickness 3-3)
    Label of the load pattern to which the specified auto seismic load applies object.

    Page 693 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The label of a Joint Pattern of scale factors multiplying the temperature change and
    temperature gradient values. If no pattern is specified then a unit scale factor is assumed
    at every joint.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the temperature load assignment to the frame object is automatically
    created from a bridge object. Otherwise it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this temperature load assignment is associated.
    This item only applies when the AutoBridge item is True.
    Table: Frame Load Transfer Options

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Transfer
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if load is transferred from area object to the frame object. Otherwise it is
    No.
    Table: Frame Local Axes Assignments 1 - Typical

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 694 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle that the local 2 and 3 axes are rotated about the positive local 1 axis, from the
    default orientation or from the orientation determined by the plane reference vector. The
    rotation for a positive angle appears counterclockwise when the local +1 axis is pointing
    toward you.

    Field: AdvanceAxes
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if an advanced method is used to define the local axes reference vectors
    for the frame object. Otherwise it is No meaning that the default reference vectors are
    used.
    Default means that the local 1-axis for the frame object goes from the I-end to the J-end of
    the object. The local 2-axis direction is specified by an angle measured from the global
    +Z axis (or from the global +X axis if the object local 1-axis is parallel to the global +Z
    axis). The rotation for a positive angle appears counterclockwise when the local +1 axis is
    pointing toward you.
    Advanced means that the local axes are defined with respect to user-defined reference
    vectors. Note that when the advanced system is used, the specified Angle is applied to the
    local axes orientation defined by the user specified reference vectors.
    Table: Frame Local Axes Assignments 2 - Advanced

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: LocalPlane
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the local plane that is to be determined by the plane reference vector.
    It is either 12 or 13, indicating the 1-2 or the 1-3 plane, respectively.

    Page 695 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlOption1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Coord Dir, Two Joints or User Vector indicating the first method used to
    determine the plane reference vector.

    Field: PlCoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system used to define the plane reference vector coordinate directions and
    the plane user vector.

    Field: CoordDir1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    primary coordinate direction taken at the object center in the specified coordinate system.
    It is used to determine the reference vector. It may be one of +X, +Y, +Z, +CR, +CA,
    +CZ, +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Field: CoordDir2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    secondary coordinate direction taken at the object center in the specified coordinate
    system. It is used to determine the reference vector. It may be one of +X, +Y, +Z, +CR,
    +CA, +CZ, +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Field: PlVecJt1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    PlVecJt1 and PlVecJt2 are the labels of two joints that define the plane reference vector.
    Either of these joints may be specified as None to indicate the center of the specified
    object. If both PlVecJt1 and PlVecJt2 are specified as None then they are not used to
    define the plane reference vector.

    Page 696 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlVecJt2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    PlVecJt1 and PlVecJt2 are the labels of two joints that define the plane reference vector.
    Either of these joints may be specified as None to indicate the center of the specified
    object. If both PlVecJt1 and PlVecJt2 are specified as None then they are not used to
    define the plane reference vector.

    Field: PlVecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    X direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.

    Field: PlVecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Y direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.

    Field: PlVecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Z direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.
    Table: Frame Material Temperatures

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The object material temperature.

    Page 697 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified material temperatures.
    If no joint pattern is specified then this item is reported as None.
    Table: Frame Offset Along Length Assignments

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Automatic or User indicating how the offsets along the length of the
    frame object are determined. Automatic means that the offset length is determined
    automatically from the frame object connectivity. User means that the offsets are user
    defined.

    Field: LengthI
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Offset along the length of the object at the I-end of the object.

    Field: LengthJ
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Offset along the length of the object at the J-end of the object.

    Field: RigidFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The rigid zone factor. This is the fraction of the end offset length assumed to be rigid for
    bending and shear deformations.
    Table: Frame Output Station Assignments

    Page 698 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: StationType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either MinNumSta or MaxStaSpcg. It indicates which of the output station fields
    (MinNumSta or MaxStaSpcg) will be read on import.

    Field: MinNumSta
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The minimum number of output stations along the object. If the MaxStaSpcg item is
    specified for the object then this item is blank.

    Field: MaxStaSpcg
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum spacing between output stations along the object. If the MinNumSta item
    is specified for the object then this item is blank.

    Field: AddAtElmInt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if stations are added at locations where other elements intersect the
    considered element. Otherwise it is No.

    Field: AddAtPtLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if stations are added at concentrated load (force or moment) locations.
    Otherwise it is No.
    Table: Frame P-Delta Force Assignments

    Page 699 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Coordinate system used to define the projection of the P-Delta axial force.

    Field: Direction
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Local 1, X Proj, Y Proj or Z Proj indicating the direction of the specified
    force.

    Field: Force
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    P-Delta axial force in the specified direction. If the direction is a projection then this is the
    projection of the P-Delta axial force upon the indicated axis of the specified coordinate
    system.
    Table: Frame Property Modifiers

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: AMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for cross-section (axial) area. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.

    Page 700 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AS2Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for shear area in the 2 direction. This item is multiplied times the similar
    modifier specified for the section property; it does not replace the modifier specified for
    the section property.

    Field: AS3Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for shear area in the 3 direction. This item is multiplied times the similar
    modifier specified for the section property; it does not replace the modifier specified for
    the section property.

    Field: JMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for torsional constant. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.

    Field: I22Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for moment of inertia about the local 2-axis. This item is multiplied times the
    similar modifier specified for the section property; it does not replace the modifier
    specified for the section property.

    Field: I33Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for moment of inertia about the local 3-axis. This item is multiplied times the
    similar modifier specified for the section property; it does not replace the modifier
    specified for the section property.

    Page 701 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MassMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for the element self mass. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.

    Field: WeightMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for the element self weight. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.

    Field: EAModifier
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    This item is the modification factor for axial stiffness if the Direct Analysis method is
    used. Its value is normally fixed at 0.8 and is independent of Tau_b. This item is a
    function of the ratio of alpha times the design axial compression force to the force
    required to yield the steel section.

    Field: EIModifier
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    This item is the modification factor for flexural stiffness if the Direct Analysis method is
    used. Its value is a function of Tau_b. Its assumes a fixed value of 0.8 if the Tau_b is
    taken as fixed.
    Table: Frame Property Modifier Definitions

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined frame property modifier.

    Page 702 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for cross-section (axial) area. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.

    Field: AS2Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for shear area in the 2 direction. This item is multiplied times the similar
    modifier specified for the section property; it does not replace the modifier specified for
    the section property.

    Field: AS3Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for shear area in the 3 direction. This item is multiplied times the similar
    modifier specified for the section property; it does not replace the modifier specified for
    the section property.

    Field: JMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for torsional constant. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.

    Field: I22Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for moment of inertia about the local 2-axis. This item is multiplied times the
    similar modifier specified for the section property; it does not replace the modifier
    specified for the section property.

    Page 703 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: I33Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for moment of inertia about the local 3-axis. This item is multiplied times the
    similar modifier specified for the section property; it does not replace the modifier
    specified for the section property.

    Field: MassMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The relative length of a hinge. The relative distance is equal to the absolute distance
    divided by the line object length.

    Field: WeightMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for the element self weight. This item is multiplied times the similar modifier
    specified for the section property; it does not replace the modifier specified for the section
    property.
    Table: Frame Release Assignments 1 - General

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: PI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the axial degree of freedom is released at the
    Idegree of freedom is released at the.

    Field: V2I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the shear in the local 2-axis direction degree of
    freedom is released at the Idegree of freedom is released at the.
    Page 704 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V3I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the shear in the local 3-axis direction degree of
    freedom is released at the Idegree of freedom is released at the.

    Field: TI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the torsion degree of freedom is released at the
    Idegree of freedom is released at the.

    Field: M2I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the moment about the local 2-axis degree of
    freedom is released at the Idegree of freedom is released at the.

    Field: M3I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the moment about the local 3-axis degree of
    freedom is released at the Idegree of freedom is released at the.

    Field: PJ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the axial degree of freedom is released at the
    Jdegree of freedom is released at the.

    Field: V2J
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the shear in the local 2-axis direction degree of
    freedom is released at the Jdegree of freedom is released at the.

    Page 705 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V3J
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the shear in the local 3-axis direction degree of
    freedom is released at the Jdegree of freedom is released at the.

    Field: TJ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the torsion degree of freedom is released at the
    Idegree of freedom is released at the.

    Field: M2J
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the moment about the local 2-axis degree of
    freedom is released at the Jdegree of freedom is released at the.

    Field: M3J
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the moment about the local 3-axis degree of
    freedom is released at the Jdegree of freedom is released at the.

    Field: PartialFix
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if any of the releases assigned at the specified object end have partial
    fixity. Otherwise it is No.
    Table: Frame Release Assignments 2 - Partial Fixity

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 706 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PI
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Partial fixity spring stiffness for axial deformations at the I-end of the object.

    Field: V2I
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Partial fixity spring stiffness for shear deformations in the local 2-axis direction at the Iend of the object.

    Field: V3I
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Partial fixity spring stiffness for shear deformations in the local 3-axis direction at the Iend of the object.

    Field: TI
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Partial fixity spring stiffness for torsional deformations at the I-end of the object.

    Field: M2I
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Partial fixity spring stiffness for moment (rotational) deformations about the local 2-axis at
    the I-end of the object.

    Field: M3I
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Partial fixity spring stiffness for moment (rotational) deformations about the local 3-axis at
    the I-end of the object.

    Page 707 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PJ
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Partial fixity spring stiffness for axial deformations at the J-end of the object.

    Field: V2J
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Partial fixity spring stiffness for shear deformations in the local 2-axis direction at the Jend of the object.

    Field: V3J
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Partial fixity spring stiffness for shear deformations in the local 3-axis direction at the Jend of the object.

    Field: TJ
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Partial fixity spring stiffness for torsional deformations at the I-end of the object.

    Field: M2J
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Partial fixity spring stiffness for moment (rotational) deformations about the local 2-axis at
    the J-end of the object.

    Field: M3J
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Partial fixity spring stiffness for moment (rotational) deformations about the local 3-axis at
    the J-end of the object.
    Table: Frame Release Definitions

    Page 708 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined frame release.

    Field: PI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the axial degree of freedom is released at the
    Idegree of freedom is released at the.

    Field: V2I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the shear in the local 2-axis direction degree of
    freedom is released at the Idegree of freedom is released at the.

    Field: V3I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the shear in the local 3-axis direction degree of
    freedom is released at the Idegree of freedom is released at the.

    Field: TI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the torsion degree of freedom is released at the
    Idegree of freedom is released at the.

    Field: M2I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the moment about the local 2-axis degree of
    freedom is released at the Idegree of freedom is released at the.

    Page 709 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M3I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the moment about the local 3-axis degree of
    freedom is released at the Idegree of freedom is released at the.

    Field: PJ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the axial degree of freedom is released at the
    Jdegree of freedom is released at the.

    Field: V2J
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the shear in the local 2-axis direction degree of
    freedom is released at the Jdegree of freedom is released at the.

    Field: V3J
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the shear in the local 3-axis direction degree of
    freedom is released at the Jdegree of freedom is released at the.

    Field: TJ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the torsion degree of freedom is released at the
    Idegree of freedom is released at the.

    Field: M2J
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the moment about the local 2-axis degree of
    freedom is released at the Jdegree of freedom is released at the.

    Page 710 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M3J
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes or No indicating whether the moment about the local 3-axis degree of
    freedom is released at the Jdegree of freedom is released at the.

    Field: StiffPI
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Partial fixity spring stiffness for axial deformations at the I-end of the object.

    Field: StiffV2I
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Partial fixity spring stiffness for shear deformations in the local 2-axis direction at the Iend of the object.

    Field: StiffV3I
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Partial fixity spring stiffness for shear deformations in the local 3-axis direction at the Iend of the object.

    Field: StiffTI
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Partial fixity spring stiffness for torsional deformations at the I-end of the object.

    Field: StiffM2I
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Partial fixity spring stiffness for moment (rotational) deformations about the local 2-axis at
    the I-end of the object.

    Page 711 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StiffM3I
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Partial fixity spring stiffness for moment (rotational) deformations about the local 3-axis at
    the I-end of the object.

    Field: StiffPJ
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Partial fixity spring stiffness for axial deformations at the J-end of the object.

    Field: StiffV2J
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Partial fixity spring stiffness for shear deformations in the local 2-axis direction at the Jend of the object.

    Field: StiffV3J
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    Partial fixity spring stiffness for shear deformations in the local 3-axis direction at the Jend of the object.

    Field: StiffTJ
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Partial fixity spring stiffness for torsional deformations at the I-end of the object.

    Field: StiffM2J
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Partial fixity spring stiffness for moment (rotational) deformations about the local 2-axis at
    the J-end of the object.

    Page 712 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StiffM3J
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Partial fixity spring stiffness for moment (rotational) deformations about the local 3-axis at
    the J-end of the object.
    Table: Frame Section Assignments

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: SectionType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either I/Wide Flange, Channel, Tee, Angle, Double Angle, Box/Tube, Pipe,
    Rectangular, Circle, General, Auto Select List, or Nonprismatic indicating the type of
    frame section assigned to the object.

    Field: AutoSelect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    If the frame section type is an auto select list then this column contains the name of the
    auto select section list assigned to the object. Otherwise it is N.A.

    Field: AnalSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is the name of the analysis section assigned to the frame object. The analysis section
    is the frame section property that was used in the last analysis performed. If no analysis
    has been performed then it is the name of the frame section assigned to the object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is the name of the design section currently associated with the object. If no design has
    been run then this item is reported as N.A.
    Page 713 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MatProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Default, or the name of a Material. Default means that the material
    property for the frame object is taken from the material property designated for the frame
    section that is assigned to the frame object.

    Field: NPSectType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Default or Advanced indicating the nonprismatic section assignment
    parameters type.

    Field: NPSectLen
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total nonprismatic section length. This item only applies when the NPSectType item
    is Advanced.

    Field: NPSectRD
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The relative distance along the nonprismatic section to the I-End (start) of the line object.
    This item only applies when the NPSectType item is Advanced.
    Table: Frame Section Properties 01 - General

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the frame section, for example, W8X10 or FSEC1.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property assigned to the frame section.

    Page 714 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Shape
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The section shape type. It is one of the following: I/Wide Flange,
    Channel,
    Tee,
    Angle,
    Double Angle,
    Box/Tube,
    Pipe,
    Rectangular,
    Circle,
    General,
    Double Channel,
    Auto Select,
    SD Section,
    Nonprismatic,
    Bridge Section,
    Cold Formed C,
    Cold Formed 2C(I),
    Cold Formed Z,
    Cold Formed L,
    Cold Formed 2L(T),
    Cold Formed Hat,
    Built Up I,
    PC Conc I Girder,
    PC Conc U Girder,
    Hybrid I Girder, and
    Hybrid U Girder.

    Field: AutoType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Steel, Aluminum or Cold Formed indicating the Auto select list design type.

    Field: t3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Overall depth of the section measured perpendicular to the local 3-axis. This dimension is
    the primary dimension affecting I33.

    Page 715 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: t2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Overall width of the section measured perpendicular to the local 2-axis. This dimension is
    the primary dimension affecting I22.

    Field: tf
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Flange thickness for the section. This applies to both the top and bottom flanges of all
    sections except I/Wide Flange sections for which it only applies to the top flange. The
    flanges are oriented parallel to the section local 3-axis.

    Field: tw
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Web thickness for the section. For double angles it is the web thickness of one of the
    angles. For double channels it is the web thickness of one of the channels. For pipes it is
    the wall thickness of the pipe. For cold formed sections it is the thickness of the section.
    The webs are oriented parallel to the section local 2-axis.

    Field: t2b
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies to I/Wide Flange sections. It is the width of the bottom flange.

    Field: tfb
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies to I/Wide Flange sections. It is the thickness of the bottom flange.

    Field: dis
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This is the separation distance between double angles or double channels.

    Page 716 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Radius
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The radius used in a cold formed section.

    Field: LipDepth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The lip depth for a cold formed section.

    Field: LipAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The lip angle in degrees for a cold formed Z section.

    Field: Area
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Cross-section area of the section.

    Field: TorsConst
    Field is Imported: Yes
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Torsional constant.

    Field: I33
    Field is Imported: Yes
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Moment of inertia for bending about the local 3 axis.

    Field: I22
    Field is Imported: Yes
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Moment of inertia for bending about the local 2 axis.

    Page 717 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: I23
    Field is Imported: Yes
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Product of inertia for bending about the local 2 and 3 axis.

    Field: AS2
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Shear area for shear in the local 2-axis direction.

    Field: AS3
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Shear area for shear in the local 3-axis direction.

    Field: S33
    Field is Imported: Yes
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for bending about the local 3 axis.

    Field: S22
    Field is Imported: Yes
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for bending about the local 2 axis.

    Field: Z33
    Field is Imported: Yes
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Plastic modulus for bending about the local 3 axis.

    Field: Z22
    Field is Imported: Yes
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Plastic modulus for bending about the local 2 axis.

    Page 718 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R33
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Radius of gyration about the local 3 axis.

    Field: R22
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Radius of gyration about the local 2 axis.

    Field: EccV2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This is the eccentricity of the shear center for major shear (V2), measured in the local-3
    direction from the centroid of the frame section to the shear center.

    Field: ConcCol
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes, indicating that the frame section is a concrete column, or it is No.
    If it is Yes then additional information about the section is included in the Concrete
    Column Properties table.

    Field: ConcBeam
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes, indicating that the frame section is a concrete beam, or it is No. If
    it is Yes then additional information about the section is included in the Concrete Beam
    Properties table.

    Field: Color
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color associated with the
    section.

    Page 719 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: TotalWt
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    Total weight of all objects in the model that are assigned the specified frame section
    property.

    Field: TotalMass
    Field is Imported: No
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    Total mass of all objects in the model that are assigned the specified frame section
    property.

    Field: FromFile
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the section properties are obtained from a section property database file.
    Otherwise it is No.

    Field: AMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Area modifier for the specified frame section property. This item is used for analysis only,
    not design. For nonprismatic sections this item is taken by the analysis as 1 regardless of
    what you input.

    Field: A2Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear area modifier for shear parallel to the local 2-axis for the specified frame section
    property. This item is used for analysis only, not design. For nonprismatic sections this
    item is taken by the analysis as 1 regardless of what you input.

    Page 720 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: A3Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear area modifier for shear parallel to the local 3-axis for the specified frame section
    property. This item is used for analysis only, not design. For nonprismatic sections this
    item is taken by the analysis as 1 regardless of what you input.

    Field: JMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Torsional constant modifier for the specified frame section property. This item is used for
    analysis only, not design. For nonprismatic sections this item is taken by the analysis as 1
    regardless of what you input.

    Field: I2Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Moment of inertia modifier for bending about the local 2-axis for the specified frame
    section property. This item is used for analysis only, not design. For nonprismatic
    sections this item is taken by the analysis as 1 regardless of what you input.

    Field: I3Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Moment of inertia modifier for bending about the local 3-axis for the specified frame
    section property. This item is used for analysis only, not design. For nonprismatic
    sections this item is taken by the analysis as 1 regardless of what you input.

    Field: MMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Mass multiplier for the specified frame section property. This item is used for analysis
    only, not design. For nonprismatic sections this item is taken by the analysis as 1
    regardless of what you input.

    Page 721 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Weight multiplier for the specified frame section property. This item is used for analysis
    only, not design. For nonprismatic sections this item is taken by the analysis as 1
    regardless of what you input.

    Field: SectInFile
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the section as it appears in the section property database file.

    Field: FileName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name (full path) of the section property database file from which the section
    properties are to be obtained. This item only applies when the FromFile item is Yes.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified frame section property.

    Field: Notes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    User notes for the specified frame section property.
    Table: Frame Section Properties 02 - Concrete Column

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a frame section property assigned to a object.

    Page 722 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property for the longitudinal reinforcing steel in the section.

    Field: RebarMatC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property for the confinement reinforcing steel (ties) in the section.

    Field: ReinfConfig
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Rectangular or Circular indicating the configuration of the column
    longitudinal reinforcing. This item only applies when the section type is rectangular.
    Circular section types are always assumed to have circular reinforcing configurations.

    Field: LatReinf
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Ties or Spiral indicating the type of column lateral (shear) reinforcing. This
    item only applies when the ReinfConfig item is Circular.

    Field: Cover
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies when the DiaphType item is Brace. It is the distance from the
    bottom brace work point to the bottom of the adjacent girder. A negative distance means
    that the brace work point is above the bottom of the adjacent girder.
    In the special case of circular reinforcement in a rectangular column, the cover is taken to
    be the minimum clear cover.

    Page 723 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumBars3Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to a rectangular reinforcing configuration. It is the number of
    longitudinal bars (including the corner bar) on each face of the column that is parallel to
    the local 3-axis of the column.

    Field: NumBars2Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to a rectangular reinforcing configuration. It is the number of
    longitudinal bars (including the corner bar) on each face of the column that is parallel to
    the local 2-axis of the column.

    Field: NumBarsCirc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to a circular reinforcing configuration. It is the total number of
    longitudinal reinforcing bars in the column.

    Field: BarSizeL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The specified size of longitudinal reinforcing bars in the column.

    Field: BarSizeC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The specified size of confinement reinforcing bars (ties) in the column.

    Field: SpacingC
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The longitudinal spacing of the confiement bars (ties).

    Page 724 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumCBars2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to a rectangular reinforcing configuration. It is the number of
    confinement bars (tie legs) running in the local 2-axis of the column.

    Field: NumCBars3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to a rectangular reinforcing configuration. It is the number of
    confinement bars (tie legs) running in the local 3-axis of the column.

    Field: ReinfType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the column longitudinal reinforcing is to
    be designed or checked.
    Table: Frame Section Properties 03 - Concrete Beam

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a frame section property assigned to a object.

    Field: RebarMatL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property for the longitudinal reinforcing steel in the section.

    Field: RebarMatC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property for the confinement reinforcing steel (ties) in the section.

    Page 725 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TopCover
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the top of the beam to the centroid of the top longitudinal
    reinforcement.

    Field: BotCover
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the bottom of the beam to the centroid of the bottom longitudinal
    reinforcement.

    Field: TopLeftArea
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total area of longitudinal reinforcement at the top left end of the beam.

    Field: TopRghtArea
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total area of longitudinal reinforcement at the top right end of the beam.

    Field: BotLeftArea
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total area of longitudinal reinforcement at the bottom left end of the beam.

    Field: BotRghtArea
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total area of longitudinal reinforcement at the bottom right end of the beam.
    Table: Frame Section Properties 04 - Auto Select

    Page 726 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ListName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the auto select section list.

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a frame section that is assigned to the auto select section list.
    Table: Frame Section Properties 05 - Nonprismatic

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the frame section.

    Field: NumSegments
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of segments that define the nonprismatic section.

    Field: SegmentNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The segment number.

    Field: StartSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the frame section property at the beginning of the specified segment.

    Field: EndSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the frame section property at the end of the specified segment.
    Page 727 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LengthType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Absolute or Variable indicating the type of length specified. For import this
    item determines which of the two length fields, AbsLength or VarLength will be read.

    Field: AbsLength
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute (fixed) length of the segment, if any.

    Field: VarLength
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The specified variable length of the segment, if any.

    Field: EI33Var
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Linear, Parabolic or Cubic indicating the variation of E*I33 along the
    specified segment.

    Field: EI22Var
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Linear, Parabolic or Cubic indicating the variation of E*I22 along the
    specified segment.
    Table: Frame Section Properties 06 - Polygon Data

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the frame section.

    Page 728 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Polygon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The polygon number.

    Field: Point
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The point number in the associated polygon.

    Field: X
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate (parallel to axis 3) of the specified point measured from the lower lefthand corner of the section.

    Field: Y
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate (parallel to axis 2) of the specified point measured from the lower lefthand corner of the section.

    Field: Opening
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the polygon represents an opening in the section. Otherwise it is No.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the polygon. This item is only applicable when the
    Opening item is No.

    Page 729 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RefPtX
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate (parallel to axis 3) of section reference point measured from the lower
    left-hand corner of the section.

    Field: RefPtY
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate (parallel to axis 2) of section reference point measured from the lower
    left-hand corner of the section.
    Table: Frame Section Properties 07 - Built Up I

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the frame section.

    Field: ItemType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either I Section, Top Cover Plate or Bottom Cover Plate indicating the section item
    type considered.

    Field: ISection
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the I section property. This item only applies the ItemType item is I Section.

    Field: FyTF
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The yield stress used for the I sectiontop flange.Inputting 0 means that the yield stress
    specified for the I section is used. This item only applies the ItemType item is I Section.

    Page 730 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FyW
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The yield stress used for the I sectionweb.Inputting 0 means that the yield stress specified
    for the I section is used. This item only applies the ItemType item is I Section.

    Field: FyBF
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The yield stress used for the I sectionbottom flange.Inputting 0 means that the yield stress
    specified for the I section is used. This item only applies the ItemType item is I Section.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the steel material property used for a coverplate. This item only applies the
    ItemType item is Top Cover Plate or Bottom Cover Plate.

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the coverplate. This item only applies the ItemType item is Top Cover Plate
    or Bottom Cover Plate.

    Field: Thick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the coverplate. This item only applies the ItemType item is Top Cover
    Plate or Bottom Cover Plate.
    Table: Frame Section Properties 08 - PCC I Girder

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the frame section.

    Page 731 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: B1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the girder top flange.

    Field: B2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the girder bottom flange.

    Field: B3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the girder web.

    Field: B4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the girder top fillet.

    Field: D1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total depth of the girder.

    Field: D2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum depth of the girder top flange.

    Field: D3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The maximum depth of the girder top flange.

    Page 732 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: D4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The depth of the girder top fillet.

    Field: D5
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The depth of the girder bottom fillet.

    Field: D6
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The depth of the girder bottom flange.
    Table: Frame Section Properties 09 - PCC U Girder

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the frame section.

    Field: B1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The overall width of the top of the U girder.

    Field: B2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The overall width of the bottom of the U girder.

    Field: B3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of each U girder web.
    Page 733 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: B4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the fillet in the girder bottom flange.

    Field: B5
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of top flange extension beyond the web toward the inside of the U girder.

    Field: B6
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of top flange extension beyond the web toward the outside of the U girder.

    Field: D1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The total depth of the girder.

    Field: D2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum depth of the girder bottom flange.

    Field: D3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The depth of the girder bottom flange fillets.

    Field: D4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The depth of the fillet on the top flange extension beyond the web toward the outside of
    the U girder.
    Page 734 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: D5
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The depth of the top flange extension beyond the web toward the outside of the U girder
    not including the fillet depth.

    Field: D6
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The depth of the fillet on the top flange extension beyond the web toward the inside of the
    U girder.

    Field: D7
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The depth of the top flange extension beyond the web toward the inside of the U girder not
    including the fillet depth.
    Table: Frame Section Properties 10 - Steel Joist General

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the frame section.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property for the steel joist.

    Field: Color
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color associated with the
    section.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Page 735 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: JoistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Standard or Envelope indicating the joist design type. Standard is like the K
    series joists and Envelope is like the KCS series joists.

    Field: Depth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The overall depth of the joist.

    Field: UnitWt
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The unit weight (force per unit length) of the joist.

    Field: AnalysisI33
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The joist moment of inertia used for analysis.

    Field: MomCap
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The moment capacity for the joist. This item only applies when the JoistType item is
    Envelope.

    Field: ShearCap
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The shear capacity for the joist. This item only applies when the JoistType item is
    Envelope.

    Page 736 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinSpan
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The minimum span length for the joist. This item only applies when the JoistType item is
    Envelope.

    Field: MaxSpan
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum span length for the joist. This item only applies when the JoistType item is
    Envelope.
    Table: Frame Section Properties 11 - Steel Joist Data

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the frame section.

    Field: SpanLength
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The joist span length for which the specified capacities and I33 apply.

    Field: TLCap
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The joist total load capacity for the specified span length.

    Field: LLDeflCap
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The joist live load capacity that will limit live load deflection to L/360 for the specified
    span length.

    Page 737 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: I33
    Field is Imported: Yes
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The joist moment of inertia for the specified span length.
    Table: Frame Section Properties 12 - Hybrid Steel U Section

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the frame section.

    Field: WebMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the steel material property used for the webs of the U section.

    Field: TFMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the steel material property used for the top flanges of the U section. This item
    can be blank if the it is the same as WebMat.

    Field: BFMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the steel material property used for the bottom flange of the U section. This
    item can be blank if the it is the same as WebMat.

    Field: D1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The web clear depth for the U section measured in vertical direction.

    Page 738 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: B1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The web distance for the U section measured at the top of the webs (CL to CL).

    Field: B2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bottom flange width for the U section.

    Field: B3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The top flange width (per each) for the U section.

    Field: B4
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bottom flange lip for the U section measured from the web CL to flange edge. This
    item can be zero.

    Field: tw
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The web thickness for the U section.

    Field: tf
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The top flange thickness for the U section.

    Field: tfb
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The bottom flange thickness for the U section.
    Page 739 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Frame Section Properties - Bridge Object Flags

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the frame section.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the frame section is an automatically created bridge section. Otherwise
    it is No.

    Field: BridgeSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge section with which this frame section is associated.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this frame section is associated.

    Field: BOSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object with which this frame section is associated.

    Field: BOSpanDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance along the bridge object span indicated by the BOSpan item at which this
    frame section applies.
    Table: Frame Spring Assignments

    Page 740 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Simple or Link Property indicating the type of spring specified.

    Field: Stiffness
    Field is Imported: Yes
    Format: Trans Stiffness/Length (Stiffness section of form)
    Units: Force/Length/Length
    Spring stiffness per unit length along the line object in the direction specified. This item
    only applies when the Type item is Simple.

    Field: SimpleType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Tension and Compression, Compression Only, or Tension Only indicating
    the type of simple spring specified.

    Field: LinkProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the link property assigned to the spring. This item only applies when the
    Type item is Link Property.

    Field: Dir1Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Object Axes, Line 2-3 Plane, or User Vector indicating the method used to
    define the tension direction for simple springs or the link local 1-axis direction for Link
    Property springs.

    Page 741 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either -3, -2, -1, 1, 2 or 3 indicating the tension direction for simple springs or the
    link local 1-axis direction for Link Property springs. The -3, -2, -1, 1, 2 and 3 items refer
    to the line object local axes directions.
    This item only applies when the Dir1Type item is Object Axes.

    Field: Axis1Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle in degrees mesured counterclockwise from the line object local 2-axis to the
    tension direction for simple springs or the link local 1-axis direction for Link Property
    springs when they are oriented in the line 2-3 plane.
    This item only applies when the Dir1Type item is Line 2-3 Plane.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system in which a user vector is specified to define the tension direction
    for simple springs or the link local 1-axis direction for Link Property springs.
    This item only applies when the Dir1Type item is User Vector.

    Field: VecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    VecX, VecY and VecZ define the X, Y and Z (or 1, 2 and 3) components of the user
    specified direction vector for the tension direction for simple springs or the link local 1axis direction for Link Property springs. VecX, VecY and VecZ are in the coordinate
    system specified by the CoordSys item.
    This item only applies when the Dir1Type item is User Vector.

    Page 742 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    VecX, VecY and VecZ define the X, Y and Z (or 1, 2 and 3) components of the user
    specified direction vector for the tension direction for simple springs or the link local 1axis direction for Link Property springs. VecX, VecY and VecZ are in the coordinate
    system specified by the CoordSys item.
    This item only applies when the Dir1Type item is User Vector.

    Field: VecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    VecX, VecY and VecZ define the X, Y and Z (or 1, 2 and 3) components of the user
    specified direction vector for the tension direction for simple springs or the link local 1axis direction for Link Property springs. VecX, VecY and VecZ are in the coordinate
    system specified by the CoordSys item.
    This item only applies when the Dir1Type item is User Vector.

    Field: Axis2Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle in degrees that the link local 2 axis is rotated from its default orientation. This
    item only applies when the Type item is Link Property.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the spring assignment to the frame object is automatically created from
    a bridge object. Otherwise it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this spring assignment is associated.
    Table: Frame Tension And Compression Limits

    Page 743 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: TensLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a tension limit exists for the object. Otherwise it is No. For import,
    the Tension item is only read if this item is Yes.

    Field: CompLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a compression limit exists for the object. Otherwise it is No. For
    import, the Compression item is only read if this item is Yes.

    Field: Tension
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The tension limit for the object.

    Field: Compression
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The compression limit for the object.
    Table: Frame Vehicle Response Component Overwrites

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 744 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Usage
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either AASHTO HL - Superstructure, AASHTO HL - Reaction, or AASHTO H &
    HS Superstructure indicating the vehicle type and structural member type to which the
    overwrite applies.
    AASHTO HL - Superstructure refers to the superstructure negative moments over
    supports and applies to AASHTO H, HS and HL loading.
    AASHTO HL - Reaction refers to reactions at interior supports (piers) and applies only to
    AASHTO HL loaoding.
    AASHTO H & HS Superstructure refers to superstructure moments (positive or negative)
    and applies to AASHTO H and HS loading.

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either P, V2, V3, T, M2 or M3 indicating the output component to which the
    overwrite applies.

    Field: Status
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Do Not Use, Use Positive Values, Use Negative Values, or Use All Values
    indicating the portion of the output for the specified component to which the overwrite
    applies.
    Table: Function - Plot Functions

    Field: PlotFunc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a plot function.

    Page 745 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is the type of plot function. It may be LoadFunc, Energy, BaseReac, Joint, Frame,
    AreaShell, AreaPlane, AreaASolid, Solid, Link, SectionCut or GenDispl.

    Field: ObjectLabel
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    For Joint, Frame, AreaShell, AreaPlane, AreaASolid, Solid and Link-type plot functions
    this is the label of the object for which the plot function is defined. For Section Cut plot
    functions it is the name of the section cut. For Generalized Displacement plot functions it
    is the name of the generalized displacement. The field is not filled for Load Function,
    Energy and BaseReac-type plot functions.

    Field: DistType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either RelDist or AbsDist. It indicates which of the distance fields (RelDist or
    AbsDist) will be read on import.

    Field: RelDist
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The relative distance from the I-end of the frame object to the location where the frame
    forces are to be reported. If this location does not fall at an output station then the output
    forces are reported at the output station closest to the specified location. The relative
    distance is equal to the absolute distance divided by the length of the frame object.

    Field: AbsDist
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Page 746 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item depends on the type of plot function. The following values are possible for each
    plot function:
    Load Function: Acc Dir 1, Acc Dir 2, Acc DirZ, or the name of any load pattern.
    Energy: Input, Kinetic, Potential, Modal Damping, Link Damper, Link Hysteretic and
    Error.
    Base: VX, VY, VZ, MX, MY, MZ
    Joint: RelDispU1, RelDispU2, RelDispU3, RelDispR1, RelDispR2, RelDispR3,
    RelVelU1, RelVelU2, RelVelU3, RelVelR1, RelVelR2, RelVelR3, RelAccelU1,
    RelAccelU2, RelAccelU3, RelAccelR1, RelAccelR2, RelAccelR3, AbsDispU1,
    AbsDispU2, AbsDispU3, AbsDispR1, AbsDispR2, AbsDispR3, AbsVelU1, AbsVelU2,
    AbsVelU3, AbsVelR1, AbsVelR2, AbsVelR3, AbsAccelU1, AbsAccelU2, AbsAccelU3,
    AbsAccelR1, AbsAccelR2, AbsAccelR3, ReactionF1, ReactionF2, ReactionF3,
    ReactionM1, ReactionM2, ReactionM3.
    Frame: P, V2, V3, T, M2, M3
    AreaShell Resultants: F11, F22, F12, FMax, FMin, FVM, M11, M22, M12, MMax,
    MMin, V13, V23, VMax.
    AreaShell Top Stresses: TopS11, TopS22, TopS12, TopSMax, TopSMin, TopSVM,
    TopS13, TopS23, TopSVMax.
    AreaShell Bottom Stresses: BotS11, BotS22, BotS12, BotSMax, BotSMin, BotSVM,
    BotS13, BotS23, BotSVMax.
    AreaShell Layer Stresses: LayS11, LayS22, LayS12, LaySMax, LaySMin, LaySVM,
    LayS13, LayS23, LaySVMax.
    AreaPlane: S11, S22, S33, S12, SMax, SMin, SVM.
    AreaAsolid: S11, S22, S33, S12, SMax, SMin, SVM.
    Solid: S11, S22, S33, S12, S13, S23, SMax, SMid, SMin, SVM.
    Link: DeformU1, DeformU2, DeformU3, DeformR1, DeformR2, DeformR3, PI, V2I,
    V3I, TI, M2I, M3I, PJ, V2J, V3J, TJ, M2J, M3J,Section Cut: F1, F2, F3, M1, M2, M3,
    Generalized Displacement: Not Used.

    Page 747 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either All, indicating that all modes are considered in the output, or it is a single
    mode number, indicating that only the specified mode is considered in the output.

    Field: RefItem
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'CSys Origin' or the name of a joint attached to the specified object. This
    item only applies for area objects and solid objects. It is the reference location from which
    the output location is determined using the specified offsets.
    If the specified coordinate system is 'Local' then this item must be a joint.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the coordinate system in which the offsets to the output point are specified.
    This item only applies for area objects and solid objects.

    Field: OffsetX
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The offset from the specified reference point to the output location in the coordinate
    system X direction. If the Local coordinate system is specified then this is the offset in the
    local 1 direction.
    This item only applies for area objects and solid objects.

    Field: OffsetY
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The offset from the specified reference point to the output location in the coordinate
    system Y direction. If the Local coordinate system is specified then this is the offset in the
    local 2 direction.
    This item only applies for area objects and solid objects.

    Page 748 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OffsetZ
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The offset from the specified reference point to the output location in the coordinate
    system Z direction. If the Local coordinate system is specified then this is the offset in the
    local 3 direction.
    This item only applies for area objects and solid objects.

    Field: ClosestJt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the output location is to be the closest analysis model joint associated
    with the specified object to the output location specified by the offsets.
    This item only applies for area objects and solid objects.

    Field: LayerName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This name of a layer in a layered shell for which layered shell stresses are reported.
    This item only applies for area objects with layered shellsection assignments.

    Field: ThickLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either -2, -1, 0, or a number greater than 0. A value of -2 means stresses are
    reported at the bottom of the layer, -1 means the top of the layer, 0 means midheight of the
    layer, and greater than 0 means at the specified integration point.
    This item only applies for area objects with layered shellsection assignments.
    Table: Function - Power Spectral Density - From File

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the power spectral density function from file.

    Page 749 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frequency
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The power spectral density function value at the specified time. The units for this item are
    the reciprocal of the frequency units.

    Field: Value
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    steady state function.

    Field: FreqUnits
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Hz or RPM indicating the units of the frequency in the file. Note that for
    power spectral density functions the units of the Value item are the reciprocal of the units
    for the Frequency item.

    Field: HeaderLines
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of lines the program will ignore at the beginning of the file.

    Field: PrefixChars
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of characters the program will ignore at the beginning of each line in the file.

    Field: PtsPerLine
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    How many function values, or sets of time and function values, depending on the
    DataType, are specified on each line of the file.

    Page 750 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DataType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: FormatType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Free or Fixed indicating the format type for the data in the file.

    Field: FixedLength
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is the number of characters per item that applies if the format type is Fixed.

    Field: Interval
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    .

    Field: FileName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the text file containing the function.
    Table: Function - Power Spectral Density - User

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    user-defined Frequency for a step in the power spectral density function.

    Field: Frequency
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    Frequency in Hz for a step in the power spectral density function.
    Page 751 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Value
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    steady state function.
    Table: Function - Response Spectrum - AASHTO 2006

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the AASHTO 2006 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: A
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The AASHTO 2006 acceleration coefficient specified in AASHTO LRFD 2006 Article
    3.10.2.

    Page 752 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SoilType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either I, II, III or IV indicating the Soil Profile Type specified in AASHTO LRFD
    2006 Table 3.10.5.1-1.
    Table: Function - Response Spectrum - AASHTO 2007

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the AASHTO 2007 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: AccOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Latitude/Longitude, Zip Code or User indicating the option used to
    determine the Ss and S1 spectral accelerations.

    Page 753 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Latitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Field: Longitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Field: ZipCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The 5-digit zip code of the site where the response spectrum is desired.
    This item is only applicable when the AccOption item is Zip Code.
    Note that the Ss and S1 values used for this option are those at the center of the specified
    zip codes; they are not maximum or minimum values. For some zip codes (such as those
    in coastal California) there may be significance variation of Ss and S1 over the zip code.
    Thus the zip code option should be used with care. In general, the Latitude/Longitude
    method is recommended.

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 0.2-second period spectral acceleration for the site. This item is only imported when
    the AccOption item is User.

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 1-second period spectral acceleration for the site. This item is only imported when the
    AccOption item is User.

    Page 754 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PGA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The peak ground acceleration for the site. This item is only imported when the AccOption
    item is User.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D, E or F indicating the site class for the considered site.

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fa. This item is only imported when the SiteClass item is F.

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fv. This item is only imported when the SiteClass item is F.

    Field: Fpga
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fpga. This item is only imported when the SiteClass item is F.

    Field: SDS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The design response spectrum acceleration at short periods. SDS = Fa * Ss.

    Field: SD1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The design response spectrum acceleration at 1-second period. SD1 = Fv * S1.
    Page 755 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Function - Response Spectrum - AASHTO 2012

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    .

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: AccOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Latitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Page 756 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Longitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: ZipCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: PGA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Page 757 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: Fpga
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: SDS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: SD1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Function - Response Spectrum - AS 1170 2007

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the AS 1170.4 2007 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Page 758 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D or E indicating the Site Sub Soil Class.

    Field: ProbFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The AS 1170.4 2007 probability factor, kp, specified in Table 3.1.

    Field: HazFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The AS 1170.4 2007 hazard factor, Z, specified in Table 3.2.

    Field: StPerFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The AS 1170.4 2007 structure performance factor, Sp, specified in Table 6.5.

    Page 759 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StDucFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The AS 1170.4 2007 structure ductility factor, u, specified in Table 6.5.
    Table: Function - Response Spectrum - BOCA96

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the BOCA96 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: Aa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The BOCA96 seismic coefficient representing the effective peak acceleration.

    Page 760 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Av
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The BOCA96 seismic coefficient representing the effective peak velocity-related
    acceleration.

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The BOCA96 response modification factor.

    Field: S
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The BOCA96 coefficient for the soil profile characteristics of the site.
    Table: Function - Response Spectrum - Chinese 2010

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Chinese 2010 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Page 761 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: AlphaMax
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum influence factor.

    Field: SI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following items indicating the Chinese 2002 seismic intensity: 6
    (0.05g),
    7 (0.10g),
    7 (0.15g),
    8 (0.20g),
    8 (0.30g), Product of Inertia about 2-3
    9 (0.40g).

    Field: Tg
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The Chinese 2010 characteristic ground period.

    Field: PTDF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Chinese 2010 period time discount factor.
    Table: Function - Response Spectrum - GB501112006

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Chinese GB50111-2006 response spectrum function.
    Page 762 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: A
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Peak Acceleration.

    Field: SI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following items indicating the Chinese seismic intensity: 6 (0.05g),
    7 (0.10g),
    7 (0.15g),
    8 (0.20g),
    8 (0.30g), Product of Inertia about 2-3
    9 (0.40g).

    Field: Tg
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The characteristic ground period.
    Page 763 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Function - Response Spectrum - JTGTB0201

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Chinese JTG/T B02-01-2008 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: A
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Peak Acceleration.

    Field: SI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following items indicating the Chinese seismic intensity: 6 (0.05g),
    7 (0.10g),
    7 (0.15g),
    8 (0.20g),
    Page 764 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    8 (0.30g), Product of Inertia about 2-3


    9 (0.40g).

    Field: Tg
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The characteristic ground period.

    Field: Direction
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The response spectrum direction (Horizontal, Vertical-Rock, Vertical-Soil).

    Field: Ci
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Importance coefficient.

    Field: Cs
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Site soil coefficient.
    Table: Function - Response Spectrum - EuroCode8

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the EuroCode8 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Page 765 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: Ag
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The EuroCode8 design ground acceleration.

    Field: SoilClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The EuroCode8 subsoil class. This is either A, B or C.

    Field: DampFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The EuroCode8 damping correction factor.
    Table: Function - Response Spectrum - EuroCode8 2004

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the EuroCode8 response spectrum function.

    Page 766 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    .

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: Country
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either CEN Default, Norway or Other indicating the country for which the
    Nationally Determined Parameters (NDPs) are specified.

    Field: Direction
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Horizontal or Vertical indicating the ground motion direction.

    Field: Ag
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The EuroCode8-2004 design ground acceleration in g, ag.

    Page 767 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SpecType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The EuroCode8-2004 spectrum type. This is either 1 or 2.

    Field: GroundType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The EuroCode8-2004 ground type. This is either A, B, C, D or E. This item applies when
    the Direction item is Horizontal.

    Field: SoilFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The EuroCode8-2004 soil factor, S. This item applies when the Direction item is
    Horizontal.

    Field: AvgOverAg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The vertical ground acceleration divided by the horizontal ground acceleration, Avg/Ag.
    This item applies when the Direction item is Vertical.

    Field: Tb
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The lower limit of period on the constant spectral acceleration branch, Tb.

    Field: Tc
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The upper limit of period on the constant spectral acceleration branch, Tc.

    Page 768 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Td
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The period defining the start of the constant displacement range, Td.

    Field: LBFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The EuroCode8-2004 lower bound factor, Beta.

    Field: BehaveFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The EuroCode8-2004 behavior factor, q.
    Table: Function - Response Spectrum - From File

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the response spectrum function from file.

    Field: Frequency
    Field is Imported: No
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The response spectrum function frequency value.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Page 769 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: HeaderLines
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Number of header lines in the file that the program will ignore.

    Field: DataType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Freq vs Accel or Period vs Accel.

    Field: FileName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the text file containing the function.
    Table: Function - Response Spectrum - IBC2003

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the IBC2003 response spectrum function.

    Page 770 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: SDS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2003 design earthquake spectral response at short periods.

    Field: SD1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IBC2003 design earthquake spectral response at a one second period.
    Table: Function - Response Spectrum - IBC2006

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the IBC2006 response spectrum function.

    Page 771 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: AccOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Latitude/Longitude, Zip Code or User indicating the option used to
    determine the Ss and S1 spectral accelerations.

    Field: Latitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Field: Longitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Page 772 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ZipCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The 5-digit zip code of the site where the response spectrum is desired.
    This item is only applicable when the AccOption item is Zip Code.
    Note that the Ss and S1 values used for this option are those at the center of the specified
    zip codes; they are not maximum or minimum values. For some zip codes (such as those
    in coastal California) there may be significance variation of Ss and S1 over the zip code.
    Thus the zip code option should be used with care. In general, the Latitude/Longitude
    method is recommended.

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 0.2-second period spectral acceleration for the site. This item is only imported when
    the AccOption item is User.

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 1-second period spectral acceleration for the site. This item is only imported when the
    AccOption item is User.

    Field: TL
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The long-period transition period.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D, E or F indicating the site class for the considered site.

    Page 773 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fa. This item is only imported when the SiteClass item is F.

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fv. This item is only imported when the SiteClass item is F.

    Field: SDS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The force intensity at the starting point of the load segment considered.

    Field: SD1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The design response spectrum acceleration at 1-second period. SD1 = (2/3) * Fv * S1.
    Table: Function - Response Spectrum - IBC2009

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    .

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Page 774 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: AccOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Latitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: Longitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: ZipCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Page 775 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TL
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    .

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: SDS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: SD1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Function - Response Spectrum - IBC2012

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the IBC2012 response spectrum function.
    Page 776 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: AccOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Latitude/Longitude, Zip Code or User indicating the option used to
    determine the Ss and S1 spectral accelerations.

    Field: Latitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Field: Longitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Page 777 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ZipCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The 5-digit zip code of the site where the response spectrum is desired.
    This item is only applicable when the AccOption item is Zip Code.
    Note that the Ss and S1 values used for this option are those at the center of the specified
    zip codes; they are not maximum or minimum values. For some zip codes (such as those
    in coastal California) there may be significance variation of Ss and S1 over the zip code.
    Thus the zip code option should be used with care. In general, the Latitude/Longitude
    method is recommended.

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 0.2-second period spectral acceleration for the site. This item is only imported when
    the AccOption item is User.

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 1-second period spectral acceleration for the site. This item is only imported when the
    AccOption item is User.

    Field: TL
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The long-period transition period.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D, E or F indicating the site class for the considered site.

    Page 778 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fa. This item is only imported when the SiteClass item is F.

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fv. This item is only imported when the SiteClass item is F.

    Field: SDS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The force intensity at the starting point of the load segment considered.

    Field: SD1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The design response spectrum acceleration at 1-second period. SD1 = (2/3) * Fv * S1.
    Table: Function - Response Spectrum - IS1893:2002

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the IS1893 2002 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Page 779 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: Z
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The IS1893 2002 seismic zone factor, Z.

    Field: SoilType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either I, II or III indicating the IS1893 2002 soil type.
    Table: Function - Response Spectrum - Italian 3274

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Italian 3274 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Page 780 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: PGA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The peak ground acceleration expressed as a fraction of the acceleration due to gravity, g.

    Field: SoilType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, E or D indicating the soil type.

    Field: StructFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The structure modification factor used to modify horizontal response.

    Field: SpecLevel
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Elastic or SLU (Ultimate) indicating the spectrum level.

    Page 781 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Direction
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Horizontal or Vertical indicating the response direction.

    Field: StructType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Building or Bridge indicating the structure type.
    Table: Function - Response Spectrum - Italian NTC 2008

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the Italian NTC 2008 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Page 782 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AccOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Latitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: Longitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: Island
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: agOverg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: F0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: Tcs
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Page 783 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LimitState
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: UsageClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: NominalLife
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: SpectrumType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: SoilType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Topography
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: hOverH
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Page 784 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Tb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The lower limit of period on the constant spectral acceleration branch, Tb.

    Field: Tc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The upper limit of period on the constant spectral acceleration branch, Tc.

    Field: Td
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The period defining the start of the constant displacement range, Td.

    Field: Xi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: q
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .
    Table: Function - Response Spectrum - NBCC 2010

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the NBCC 2010 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.
    Page 785 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: PGA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The peak ground acceleration.

    Field: Sa02
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 0.2 seconds.

    Field: Sa05
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 0.5 seconds.

    Field: Sa1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 1 second.

    Page 786 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Sa2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 2 seconds.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D, E or F indicating the site class.

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fa.
    This item is only imported when the Site Class item is F.

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fv.
    This item is only imported when the Site Class item is F.
    Table: Function - Response Spectrum - NBCC 2005

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the NBCC 2005 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Page 787 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: PGA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The peak ground acceleration.

    Field: Sa02
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 0.2 seconds.

    Field: Sa05
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 0.5 seconds.

    Field: Sa1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 1 second.

    Page 788 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Sa2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at a period of 2 seconds.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D, E or F indicating the site class.

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fa.
    This item is only imported when the Site Class item is F.

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fv.
    This item is only imported when the Site Class item is F.
    Table: Function - Response Spectrum - NBCC95

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the NBCC95 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Page 789 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: V
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NBCC95 zonal velocity ratio.

    Field: Za
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NBCC95 acceleration-related seismic zone.

    Field: Zv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NBCC95 velocity-related seismic zone.
    Table: Function - Response Spectrum - NCHRP 20-07

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the NCHRP 20-07 response spectrum function.

    Page 790 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: AccOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Latitude/Longitude, Zip Code or User indicating the option used to
    determine the Ss and S1 spectral accelerations.

    Field: Latitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Field: Longitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is only applicable when the AccOption item is Latitude/Longitude.

    Page 791 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ZipCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The 5-digit zip code of the site where the response spectrum is desired.
    This item is only applicable when the AccOption item is Zip Code.
    Note that the Ss and S1 values used for this option are those at the center of the specified
    zip codes; they are not maximum or minimum values. For some zip codes (such as those
    in coastal California) there may be significance variation of Ss and S1 over the zip code.
    Thus the zip code option should be used with care. In general, the Latitude/Longitude
    method is recommended.

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 0.2-second period spectral acceleration for the site.
    This item is only imported when the AccOption item is User.

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The 1-second period spectral acceleration for the site.
    This item is only imported when the AccOption item is User.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D, E or F indicating the site class for the considered site.

    Field: Fa
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fa.
    This item is only imported when the SiteClass item is F.

    Page 792 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The site coefficient, Fv.
    This item is only imported when the SiteClass item is F.

    Field: SDS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The design response spectrum acceleration at short periods. SDS = Fa * Ss.

    Field: SD1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The design response spectrum acceleration at 1-second period. SD1 = Fv * S1.
    Table: Function - Response Spectrum - NEHRP97

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the NEHRP97 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Page 793 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: SDS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NEHRP97 design earthquake spectral response at short periods.

    Field: SD1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NEHRP97 design earthquake spectral response at a one second period.
    Table: Function - Response Spectrum - NZS 1170 2004

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the NZS 1170.5 2004 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Page 794 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D or E indicating the Site Sub Soil Class.

    Field: Z
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NZS 1170.5 2004 hazard factor specified in clause 3.1.4.

    Field: R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NZS 1170.5 2004 return period factor specified in clause 3.1.5.

    Field: D
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Distance to fault [km] used to calculate the NZS 1170.5 2004 near fault factor specified in
    clause 3.1.6.
    Table: Function - Response Spectrum - NZS4203

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the NZS4203 response spectrum function.

    Page 795 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: ScaleFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The NZS4203 scaling factor. The ordinates of the response spectrum are calculated using
    1992 NZS4203 Equations 4.6.3 and 4.6.4. If you are using Equation 4.6.3 then you input
    the scaling factor as Sp * R * Z * Ls. If you are using Equation 4.6.4 then you input the
    scaling factor as Sm * Sp * R * Z * Lu.

    Field: SoilCat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The NZS4203 site subsoil category. This is either A, B or C.
    Table: Function - Response Spectrum - TSC-2007

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Page 796 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    .

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: SeismicZone
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: TSC07A0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: TSC07I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Page 797 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TSC07R
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .
    Table: Function - Response Spectrum - UBC94

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the UBC94 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: Z
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC94 seismic zone.

    Page 798 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SoilType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The UBC94 soil type. This is either 1, 2 or 3.
    Table: Function - Response Spectrum - UBC97

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the UBC97 response spectrum function.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.

    Field: Ca
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC97 seismic coefficient Ca.

    Page 799 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The UBC97 seismic coefficient Cv.
    Table: Function - Response Spectrum - User

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the user-defined response spectrum function.

    Field: Period
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The response spectrum function period value.

    Field: Accel
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The response spectrum function acceleration value. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the response spectrum case.

    Field: FuncDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The damping ratio (fraction of critical damping) associated with the response spectrum
    function.
    Table: Function - Steady State - From File

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the steady state function from file.

    Page 800 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frequency
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Frequency for a step in the steady state function.

    Field: Value
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The steady state function value at the specified time. This item is unitless.

    Field: FreqUnits
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Hz or RPM indicating the units of the frequency in the file.

    Field: HeaderLines
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of lines the program will ignore at the beginning of the file.

    Field: PrefixChars
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of characters the program will ignore at the beginning of each line in the file.

    Field: PtsPerLine
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    How many function values, or sets of time and function values, depending on the
    DataType, are specified on each line of the file.

    Field: DataType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .
    Page 801 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FormatType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Free or Fixed indicating the format type for the data in the file.

    Field: FixedLength
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is the number of characters per item that applies if the format type is Fixed.

    Field: Interval
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    .

    Field: FileName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the text file containing the function.
    Table: Function - Steady State - User

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    user-defined steady state function.

    Field: Frequency
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    Frequency in Hz for a step in the steady state function.

    Field: Value
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The steady state function value at the specified time. This item is unitless.
    Page 802 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Function - Time History - Cosine

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Cosine time history function.

    Field: Time
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Time value for a step in the time history function.

    Field: Value
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The time history function value at the specified time. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the time history case.

    Field: Period
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The period of the Cosine function, that is, the time in seconds that it takes for the function
    to complete one cycle.

    Field: StepsPerCyc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of function value points provided for each cycle of the function.

    Field: NumCycles
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of cycles in the function.

    Page 803 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Amplitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum function value in the function.
    Table: Function - Time History - From File

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the time history function from file.

    Field: Time
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Time value for a step in the time history function.

    Field: Value
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The time history function value at the specified time. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the time history case.

    Field: HeaderLines
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of lines the program will ignore at the beginning of the file.

    Field: PrefixChars
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of characters the program will ignore at the beginning of each line in the file.

    Page 804 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PtsPerLine
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    How many function values, or sets of time and function values, depending on the
    DataType, are specified on each line of the file.

    Field: DataType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Equal Interval or Time and Value. Equal Interval means that the file contains
    function values that are spaced at an equal time value that is specified in the Interval
    column. Time and Value means that the file contains sets of time and function values.

    Field: FormatType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Free or Fixed indicating the format type for the data in the file.

    Field: FixedLength
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is the number of characters per item that applies if the format type is Fixed.

    Field: Interval
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    An equal time interval between function values. This item applies when DataType is
    Equal Interval.

    Field: FileName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the text file containing the function.
    Table: Function - Time History - Ramp

    Page 805 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Ramp time history function.

    Field: Time
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Time value for a step in the time history function.

    Field: Value
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The time history function value at the specified time. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the time history case.

    Field: RampTime
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The time it takes for the ramp function to initially reach its maximum value.

    Field: Amplitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum function value in the function.

    Field: MaxTime
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The time at the end of the ramp function.
    Table: Function - Time History - Sawtooth

    Page 806 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Sawtooth time history function.

    Field: Time
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Time value for a step in the time history function.

    Field: Value
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The time history function value at the specified time. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the time history case.

    Field: Period
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The period of the Sawtooth function, that is, the time in seconds that it takes for the
    function to complete one cycle.

    Field: RampTime
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The time it takes for the Sawtooth function to ramp up from a function value of zero to its
    maximum amplitude.

    Field: NumCycles
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of cycles in the function.

    Page 807 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Amplitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum function value in the function.
    Table: Function - Time History - Sine

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Sine time history function.

    Field: Time
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Time value for a step in the time history function.

    Field: Value
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The time history function value at the specified time. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the time history case.

    Field: Period
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The period of the Sine function, that is, the time in seconds that it takes for the function to
    complete one cycle.

    Field: StepsPerCyc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of function value points provided for each cycle of the function.

    Page 808 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumCycles
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of cycles in the function.

    Field: Amplitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum function value in the function.
    Table: Function - Time History - Triangular

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Triangular time history function.

    Field: Time
    Field is Imported: No
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Time value for a step in the time history function.

    Field: Value
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The time history function value at the specified time. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the time history case.

    Field: Period
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The period of the Triangular function, that is, the time in seconds that it takes for the
    function to complete one cycle.

    Page 809 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumCycles
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of cycles in the function.

    Field: Amplitude
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum function value in the function.
    Table: Function - Time History - User

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    user-defined time history function.

    Field: Time
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Time value for a step in the time history function.

    Field: Value
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The time history function value at the specified time. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the time history case.
    Table: Function - Time History - User Periodic

    Field: Name
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    user-defined periodic time history function.

    Page 810 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Time
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Time value for a step in the time history function.

    Field: Value
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The time history function value at the specified time. Note that this item is unitless. The
    acceleration units are in the scale factor that you specify for the function when you define
    the time history case.

    Field: NumCycles
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of cycles in the function.
    Table: General Grids

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the coordinate system with which the general grid system is associated.

    Field: GridID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The label for the grid line.

    Field: LineType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Straight or Arc indicating the line type. If it is Straight then the X1, Y1, X2
    and Y2 items are specified to define the line. If it is Arc then the X1, Y1, X2, Y2, XC and
    YC items are specified to define the arc.

    Page 811 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: X1
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The X coordinate of end point 1 on the grid line in the specified coordinate system. Note
    that the default bubble location is at the end point 2 end of the grid line.

    Field: Y1
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of end point 1 on the grid line in the specified coordinate system. Note
    that the default bubble location is at the end point 2 end of the grid line.

    Field: X2
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The X coordinate of end point 2 on the grid line in the specified coordinate system. Note
    that the default bubble location is at the end point 2 end of the grid line.

    Field: Y2
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of end point 2 on the grid line in the specified coordinate system. Note
    that the default bubble location is at the end point 2 end of the grid line.

    Field: XC
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This item only applies to arcs. It is the X coordinate of a third point on the arc in the
    specified coordinate system.

    Field: YC
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    This item only applies to arcs. It is the Y coordinate of a third point on the arc in the
    specified coordinate system.

    Page 812 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PrimaryGrid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This is either Yes indicating that the grid line is a primary grid line or it is No indicating
    that it is a secondary grid line. Secondary grid lines do not display bubbles or grid ID text.

    Field: LineColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The color of the grid line.

    Field: ColorByUser
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This is either Yes indicating that the grid line color was specified by the user, or it is No
    indicating that grid line color was set by the program.

    Field: BubbleSize
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the grid line bubble.

    Field: SwitchBub
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This is either Yes indicating that the grid line bubble is to be switched from the default 2end of the grid line to the 1-end, or it is No indicating that the bubble is to be at the 2-end.

    Field: Visible
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This is either Yes indicating that the grid line is visible or it is No indicating that it is not
    visible.
    Table: Generalized Displacement Definitions 1 - Translational

    Page 813 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GenDispl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the generalized displacement.

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a joint included in the generalized displacement.

    Field: U1SF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor that multiplies the translation The material temperature associated with
    the U1 degree of freedom of the joint.

    Field: U2SF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor that multiplies the translation The material temperature associated with
    the U2 degree of freedom of the joint.

    Field: U3SF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor that multiplies the translation The material temperature associated with
    the U3 degree of freedom of the joint.

    Field: R1SF
    Field is Imported: Yes
    Format: Gen Displ L/Rad (Displacements section of form)
    Units: Length/rad
    The scale factor that multiplies the rotation The material temperature associated with the
    R1 degree of freedom of the joint.

    Page 814 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R2SF
    Field is Imported: Yes
    Format: Gen Displ L/Rad (Displacements section of form)
    Units: Length/rad
    The scale factor that multiplies the rotation The material temperature associated with the
    R1 degree of freedom of the joint.

    Field: R3SF
    Field is Imported: Yes
    Format: Gen Displ L/Rad (Displacements section of form)
    Units: Length/rad
    The scale factor that multiplies the rotation The material temperature associated with the
    R1 degree of freedom of the joint.
    Table: Generalized Displacement Definitions 2 - Rotational

    Field: GenDispl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the generalized displacement.

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a joint included in the generalized displacement.

    Field: U1SF
    Field is Imported: Yes
    Format: Gen Displ Rad/L (Displacements section of form)
    Units: Rad/Length
    The scale factor that multiplies the translation The material temperature associated with
    the U1 degree of freedom of the joint.

    Field: U2SF
    Field is Imported: Yes
    Format: Gen Displ Rad/L (Displacements section of form)
    Units: Rad/Length
    The scale factor that multiplies the translation The material temperature associated with
    the U2 degree of freedom of the joint.

    Page 815 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U3SF
    Field is Imported: Yes
    Format: Gen Displ Rad/L (Displacements section of form)
    Units: Rad/Length
    The scale factor that multiplies the translation The material temperature associated with
    the U3 degree of freedom of the joint.

    Field: R1SF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor that multiplies the rotation The material temperature associated with the
    R1 degree of freedom of the joint.

    Field: R2SF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor that multiplies the rotation The material temperature associated with the
    R1 degree of freedom of the joint.

    Field: R3SF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor that multiplies the rotation The material temperature associated with the
    R1 degree of freedom of the joint.
    Table: General Reference Line 01 - General

    Field: GRLName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a general reference line.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name the coordinate system in which the general reference line is defined. The
    general reference line plan points are defined using X and Y values in this coordinate
    system. The general reference line elevation points are defined using an S value which is

    Page 816 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    a distance along the general reference line when it is projected into the XY plane of this
    coordinate system and a Z value in this coordinate system.

    Field: DiscLength
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum discretization length along curves for the general reference line.

    Field: DiscAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The maximum discretization angle around curves for the general reference line.

    Field: Color
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color of the general
    reference line.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: Visible
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This is Yes if the general reference line is visible or No if it is not visible. Note that when
    the general reference line is being editied on the screen it is always visible regardless of
    this setting.
    Table: General Reference Line 02 - Plan Points

    Field: GRLName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a general reference line.

    Page 817 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: X
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    X coordinate of the general reference line in the coordinate system in which it is defined.

    Field: Y
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Y coordinate of the general reference line in the coordinate system in which it is defined.

    Field: CurveType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The curve type assigned to the considered general reference line definition point.
    This is one of the following:
    None
    Circular Curve
    Highway Curve
    Parabolic Curve
    Bezier Curve
    BSpline Curve
    Bezier Child
    BSpline Child
    .

    Field: Radius
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    A circular curve radius. This item applies to circular and highway curves.

    Field: CurveLength
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total length of a highway curve including the circular curve portion and the spiral
    transition portions at each end of the curve. This item applies to highway curves.

    Page 818 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AngleSym
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured from the X axis in the coordinate system in which the general
    reference line is defined to the axis of symmetry of a parabolic curve. This item applies to
    parabolic curves.

    Field: SlopeRate
    Field is Imported: Yes
    Format: 1/Length (Miscellaneous section of form)
    Units: 1/Length
    The rate at which the slope of a parabolic curve is changing in percent. This item applies
    to parabolic curves.

    Field: NumContPts
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of control points for a bezier or a bspline curve. This item applies to bezier
    and bspline curves.

    Field: NumDiscPts
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of discretization points for a bezier or a bspline curve. This item applies to
    bezier and bspline curves.

    Field: CurveOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The curve order of a bspline curve. This item specifies the number of control points that
    influence the coordinate of as station along the curve. This item applies to bspline curves.

    Field: BezierPar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The point number of the start point (parent point) of the bezier curve to which the
    specified point belongs. This item applies to child points of bezier curves.

    Page 819 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BSplinePar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The point number of the start point (parent point) of the BSpline curve to which the
    specified point belongs. This item applies to child points of bspline curves.
    Table: General Reference Line 03 - Elevation Points

    Field: GRLName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a general reference line.

    Field: S
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    A station along the general reference line. A station is the distance measured from the
    beginning of the general reference line when the line is projected into the XY plane of the
    coordinate system in which it is defined.

    Field: Z
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Z coordinate of the general reference line in the coordinate system in which it is defined.

    Field: CurveType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The curve type assigned to the considered general reference line definition point.
    This is one of the following:
    None
    Circular Curve
    Highway Curve
    Parabolic Curve
    Bezier Curve
    BSpline Curve
    Bezier Child
    BSpline Child
    .
    Page 820 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Radius
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    A circular curve radius. This item applies to circular and highway curves.

    Field: CurveLength
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total length of a highway curve including the circular curve portion and the spiral
    transition portions at each end of the curve. This item applies to highway curves.

    Field: AngleSym
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured from the X axis in the coordinate system in which the general
    reference line is defined to the axis of symmetry of a parabolic curve. This item applies to
    parabolic curves.

    Field: SlopeRate
    Field is Imported: Yes
    Format: 1/Length (Miscellaneous section of form)
    Units: 1/Length
    The rate at which the slope of a parabolic curve is changing in percent. This item applies
    to parabolic curves.

    Field: NumContPts
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of control points for a bezier or a bspline curve. This item applies to bezier
    and bspline curves.

    Field: NumDiscPts
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of discretization points for a bezier or a bspline curve. This item applies to
    bezier and bspline curves.

    Page 821 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CurveOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The curve order of a bspline curve. This item specifies the number of control points that
    influence the coordinate of as station along the curve. This item applies to bspline curves.

    Field: BezierPar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The point number of the start point (parent point) of the bezier curve to which the
    specified point belongs. This item applies to child points of bezier curves.

    Field: BSplinePar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The point number of the start point (parent point) of the BSpline curve to which the
    specified point belongs. This item applies to child points of bspline curves.
    Table: General Reference Line 04 - Discretized Coordinates

    Field: GRLName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a general reference line.

    Field: CoordSys
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name the coordinate system in which the general reference line is defined. The
    general reference line plan points are defined using X and Y values in this coordinate
    system. The general reference line elevation points are defined using an S value which is
    a distance along the general reference line when it is projected into the XY plane of this
    coordinate system and a Z value in this coordinate system.

    Page 822 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CurrentCSys
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current coordinate system when this table was created. The X, Y and Z coordinates
    reported in this table are in this coordinate system.

    Field: S
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    A station along the general reference line. A station is the distance measured from the
    beginning of the general reference line when the line is projected into the XY plane of the
    coordinate system in which it is defined.

    Field: X
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    X coordinate of the general reference line at the specified station in the coordinate system
    specified by the CurrentCSys item.

    Field: Y
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    X coordinate of the general reference line at the specified station in the coordinate system
    specified by the CurrentCSys item.

    Field: Z
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    X coordinate of the general reference line at the specified station in the coordinate system
    specified by the CurrentCSys item.

    Field: GlobalX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the general reference line at the specified station.

    Page 823 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GlobalY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the general reference line at the specified station.

    Field: GlobalZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the general reference line at the specified station.
    Table: Grid Lines

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the coordinate system for which the grid lines are defined.

    Field: AxisDir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either X, R, Y, T or Z indicating the axis direction used to locate the grid line. X
    and Y only apply to Cartesian coordinate systems. R and T only apply to Cylindrical
    coordinate systems. Z applies to both Cartesian and Cylindrical coordinate systems.

    Field: GridID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the grid line.

    Field: XRYZCoord
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Location of the grid line along the axis specified by the AxisDir item when the AxisDir
    item is X, R, Y or Z.

    Page 824 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Location (angle) of the grid line when the AxisDir item is T.

    Field: LineType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Primary or Secondary indicating the type of grid line.

    Field: LineColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color of the grid line.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: Visible
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the grid line is visible. Otherwise it is No.

    Field: BubbleLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Start or End indicating that the grid line bubble occurs at the start or the end
    of the grid line.

    Field: AllVisible
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the all grid lines for the specified coordinate system are visible.
    Otherwise it is No.

    Page 825 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BubbleSize
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the grid line bubble.
    Table: Groups 1 - Definitions

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a group.

    Field: Selection
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified to be used for selection. Otherwise it is No.

    Field: SectionCut
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified to be used for defining section cuts. Otherwise it
    is No.

    Field: Steel
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified to be used for defining steel frame design groups.
    Otherwise it is No.

    Field: Concrete
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified to be used for defining concrete frame design
    groups. Otherwise it is No.

    Page 826 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Aluminum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified to be used for defining aluminum design groups.
    Otherwise it is No.

    Field: ColdFormed
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified to be used for defining cold formed design
    groups. Otherwise it is No.

    Field: Stage
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified to be used for defining stages for nonlinear static
    analysis. Otherwise it is No.

    Field: Bridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified to be used for reporting bridge response output.
    Otherwise it is No.

    Field: AutoSeismic
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified to be used for reporting auto seismic loads.
    Otherwise it is No.

    Field: AutoWind
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified to be used for reporting auto wind loads.
    Otherwise it is No.

    Page 827 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SelDesSteel
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified for use in steel design. Otherwise it is No.

    Field: SelDesAlum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified for use in aluminum design. Otherwise it is No.

    Field: SelDesCold
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified for use in cold formed design. Otherwise it is No.

    Field: MassWeight
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the group is specified to be used for reporting group masses and weight.
    Otherwise it is No.

    Field: Color
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color associated with the
    group.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.
    Table: Groups 2 - Assignments

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a group.
    Page 828 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ObjectType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The type of object specified, e.g., joint, frame, area, solid or link.

    Field: ObjectLabel
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of an object that is part of the specified group.
    Table: Groups 3 - Masses and Weights

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a group.

    Field: SelfMass
    Field is Imported: Yes
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    The cumulative self mass of all objects in the group.

    Field: SelfWeight
    Field is Imported: Yes
    Format: Weight (Mass and Weight section of form)
    Units: Force
    .

    Field: TotalMassX
    Field is Imported: Yes
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    The cumulative total X-direction mass of all objects in the group.

    Field: TotalMassY
    Field is Imported: Yes
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    The cumulative total Y-direction mass of all objects in the group.
    Page 829 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalMassZ
    Field is Imported: Yes
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    The cumulative total Z-direction mass of all objects in the group.
    Table: Groups 4 - Bridge Object Flags

    Field: GroupName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: Station1
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    .

    Field: Station2
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    .

    Field: Deck
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .

    Field: Girders
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .
    Page 830 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Soffit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .

    Field: Diaphragms
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .

    Field: Hinges
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .

    Field: AbutBears
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .

    Field: BentCols
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .

    Field: BentBeams
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .

    Field: BentBears
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .

    Page 831 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Tendons
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .
    Table: Hinges Def 01 - Overview

    Field: HingeName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: DOFType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3, Interacting P-M2, Interacting P-M3,
    Interacting M2-M3, Interacting P-M2-M3, Fiber P-M2-M3.

    Field: Behavior
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Force Controlled or Deformation Controlled indicating the hinge behavior.
    Table: Hinges Def 02 - Noninteracting - Deform Control - General

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: DOFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Page 832 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Symmetric
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes, indicating that the hinge is symmetric, or it is No. Symmetric
    means that the negative force deformation behavior is the same as the positive force
    deformation behavior.

    Field: BeyondE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is To Zero or Extrapolated, indicating the force deformation behavior of the
    hinge beyond point E.

    Field: FDType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Force-Displ, Moment-Rot, Stress-Strain or Moment-Curve indicating
    the type of force-deformation specified.
    .

    Field: UseYldForce
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No. Yes means that the specified forces or moments used to
    define the hinge force deformation curve are to be scaled using the program calculated
    yield force of the section to which the hinge is assigned.

    Field: UseYldDispl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No. Yes means that the specified displacements or rotations used
    to define the hinge force deformation curve are to be scaled using the program calculated
    (approximate) yield displacement or rotation of the section to which the hinge is assigned.

    Page 833 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FDPosForSF
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The scale factor used to scale positive forces when the force-deformation type is ForceDispl.

    Field: FDPosDisSF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The scale factor used to scale positive displacements when the force-deformation type is
    Force-Displ.

    Field: FDNegForSF
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The scale factor used to scale negative forces when the force-deformation type is ForceDispl.

    Field: FDNegDisSF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The scale factor used to scale negative displacements when the force-deformation type is
    Force-Displ.

    Field: MRPosMoSF
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The scale factor used to scale positive moments when the force-deformation type is
    Moment-Rot.

    Field: MRPosRoSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor used to scale positive rotations when the force-deformation type is
    Moment-Rot.

    Page 834 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MRNegMoSF
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The scale factor used to scale negative moments when the force-deformation type is
    Moment-Rot.

    Field: MRNegRoSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor used to scale negative rotations when the force-deformation type is
    Moment-Rot.

    Field: SSPosStrsSF
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The scale factor used to scale positive stresses when the force-deformation type is StressStrain.

    Field: SSPosStnSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor used to scale positive strains when the force-deformation type is StressStrain.

    Field: SSNegStrsSF
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The scale factor used to scale negative stresses when the force-deformation type is StressStrain.

    Field: SSNegStnSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor used to scale negative strains when the force-deformation type is StressStrain.

    Page 835 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MCPosMoSF
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The scale factor used to scale positive moments when the force-deformation type is
    Moment-Curve.

    Field: MCPosCuSF
    Field is Imported: Yes
    Format: 1/Length (Miscellaneous section of form)
    Units: 1/Length
    The scale factor used to scale positive curvature when the force-deformation type is
    Moment-Curve.

    Field: MCNegMoSF
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The scale factor used to scale negative moments when the force-deformation type is
    Moment-Curve.

    Field: MCNegCuSF
    Field is Imported: Yes
    Format: 1/Length (Miscellaneous section of form)
    Units: 1/Length
    The scale factor used to scale negative curvature when the force-deformation type is
    Moment-Curve.

    Field: LengthType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    For P, V2 and V3, this item only applies when the force-deformation type is Stress-Strain.
    For T, M2, M3 and PMM, this item only applies when the force-deformation type is
    Moment-Curvature.
    It indicates whether on import the Absolute length field (SSAbsLen) or the Relative length
    field (SSRelLen) field will be read.

    Page 836 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SSAbsLen
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The absolute length of a hinge whose force-deformation type is Stress-Strain or MomentCurvature.

    Field: SSRelLen
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The relative length of a hinge whose force-deformation type is Stress-Strain or MomentCurvature. The relative distance is equal to the absolute distance divided by the line
    object length.

    Field: HysType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is eitherIsotropic, Kinematic, Takeda, or Pivot indicating the hysteresis type for the
    hinge.

    Field: PivotAlpha1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The unloading parameter, Alpha1, for the Pivot hysteresis type.

    Field: PivotAlpha2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The unloading parameter, Alpha2, for the Pivot hysteresis type.

    Field: PivotBeta1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The pinching point parameter, Beta1, for the Pivot hysteresis type.

    Page 837 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PivotBeta2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The pinching point parameter, Beta2, for the Pivot hysteresis type.

    Field: PivotEta
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The initial stiffness loss parameter, Eta, for the Pivot hysteresis type.
    Table: Hinges Def 03 - Noninteracting - Deform Control - Force-Deform

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: DOFType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Field: FDPoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either -E, -D, -C, -B, A, B, C, D or E indicating a point on the specified hinge
    force deformation curve. The Force and Displ items listed in the next two columns
    (fields) apply to this point. Note that FD is short for Force-Displacement.

    Field: Force
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The force, moment or stress used to define the specified point (see FDPoint column) on
    the hinge force deformation curve. Note that the units for this item are provided by its
    associated scale factor in the Hinge Force Deformation Information table.

    Page 838 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Displ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The displacement, rotation or strain used to define the specified point (see FDPoint
    column) on the hinge force deformation curve. Note that the units for this item are
    provided by its associated scale factor in the Hinge Force Deformation Information table.
    Table: Hinges Def 04 - Noninteracting - Deform Control - Acceptance

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: DOFType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Field: ACPoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either IO, LS or CP indicating a particular acceptance criterion. The ACPos
    and ACNeg items listed in the next two columns (fields) apply to this point. Note that the
    AC is short for Acceptance Criteria.
    IO is short for immediate occupancy, LS is short for life safety and CP is short for collapse
    prevention.

    Field: ACPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The acceptable positive deformation for the specified acceptance criteria. Note that the
    units for this item are provided by its associated scale factor in a previous table.

    Page 839 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ACNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The acceptable negative deformation for the specified acceptance criteria. Note that the
    units for this item are provided by its associated scale factor in a previous table.
    Table: Hinges Def 05 - Noninteracting - Force Control

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: DOFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Field: Symmetric
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the hinge behavior is symmetric; otherwise it is No.

    Field: DropLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the hinge loses all carrying capacity when the maximum specified load
    is reached. It is No if the hinge remains elastic.

    Field: MaxType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Ratio or Value indicating how the maximum load is specified. Ratio
    means it is specified as the ratio of maximum force (moment) divided by yield force
    (moment). Value means the actual maximum force (moment) is specified.

    Page 840 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RatioPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum allowed positive ratio of maximum force (moment) divided by yield force
    (moment). This item only applies when the MaxType item is Ratio.

    Field: RatioNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum allowed negative ratio of maximum force (moment) divided by yield force
    (moment). This item only applies when the Symmetric item is No and the MaxType item
    is Ratio.

    Field: ForcePos
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The maximum allowed positive force. This item only applies when the MaxType item is
    Value and an axial or shear hinge is specified.

    Field: ForceNeg
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The maximum allowed negative force. This item only applies when Symmetric item is No
    and the MaxType item is Value and an axial or shear hinge is specified.

    Field: MomentPos
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    This item only applies when the MaxType item is Value and an moment or torsion hinge is
    specified.

    Field: MomentNeg
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The maximum allowed negative moment. This item only applies when Symmetric item is
    No and the MaxType item is Value and an moment or torsion hinge is specified.

    Page 841 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IOPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The positive acceptance criterion for immediate occupancy. This item is a force
    (moment) ratio.

    Field: LSPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The positive acceptance criterion for life safety. This item is a force (moment) ratio.

    Field: CPPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The positive acceptance criterion for collapse prevention. This item is a force (moment)
    ratio.

    Field: IONeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The negative acceptance criterion for immediate occupancy. This item is a force
    (moment) ratio. This item only applies when Symmetric item is No.

    Field: LSNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The negative acceptance criterion for life safety. This item is a force (moment) ratio. This
    item only applies when Symmetric item is No.

    Field: CPNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The negative acceptance criterion for collapse prevention. This item is a force (moment)
    ratio. This item only applies when Symmetric item is No.
    Table: Hinges Def 06 - Interacting - Deform Control - General

    Page 842 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: DOFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Interacting PM2, Interacting P-M3, Interacting M2-M3, Interacting P-M2-M3.

    Field: FDType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Moment-Rot or Moment-Curve indicating the type of forcedeformation specified.
    .

    Field: LengthType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies when the force-deformation type is Moment-Curvature.
    It indicates whether on import the Absolute length field (SSAbsLen) or the Relative length
    field (SSRelLen) field will be read.

    Field: SSAbsLen
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The absolute length of a hinge whose force-deformation type Moment-Curvature.

    Field: SSRelLen
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The relative length of a hinge whose force-deformation type is Moment-Curvature. The
    relative distance is equal to the absolute distance divided by the line object length.
    Page 843 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Yield or User Defined indicating the scale factor type. Yield means the
    scale factor is based on the yield rotation or yield curvature depending on the forcedeformation type specified. User Defined means that the scale factor is defined by the
    user.

    Field: UserSFRot
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The user scale factor for rotation. This item only applies when the force-deformation type
    Moment-Rotation and the scale factor type is User Defined.

    Field: UserSFCur
    Field is Imported: Yes
    Format: 1/Length (Miscellaneous section of form)
    Units: 1/Length
    The user scale factor for curvature. This item only applies when the force-deformation
    type Moment-Curvature and the scale factor type is User Defined.

    Field: BeyondE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is To Zero or Extrapolated, indicating the force deformation behavior of the
    hinge beyond point E.

    Field: PMSym
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item only applies to PM2 and PM3 hinges. It is Yes if the moment-rotation (momentcurvature) behavior is symmetric. Otherwise it is No.

    Field: PMMorMMSym
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies to PM2M3 and M2M3 hinges. This item is either Circular, Double
    or None indicating the moment-rotation (moment-curvature) behavior for the hinge. This
    Page 844 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    item only applies to PM2M3 and M2M3 hinges. This item is either Circular, Double or
    None indicating the moment-rotation (moment-curvature) behavior for the hinge. Circular
    means there is circular symmetry, Double means there is double symmetry and None
    means there is No symmetry.

    Field: NumAxForce
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of axial forces specified for moment rotation curves. This item does not
    apply to M2M3 hinges.

    Field: NumAngle
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of angles specified for moment rotation curves.
    Table: Hinges Def 07 - Interacting - Deform Control - Fs and Angs

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: DOFType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Interacting PM2, Interacting P-M3, Interacting M2-M3, Interacting P-M2-M3.

    Field: AxForce
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    An axial force for which moment rotation data is supplied. This item does not apply to
    M2M3 hinges.

    Page 845 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    An angle in degrees at which moment rotation data is supplied.
    For PM2 and PM3 hinges, if symmetry exists then a single angle at 0 degrees is specified.
    For PM2 and PM3 hinges, if no symmetry exists then angles at 0 and 180 degrees are
    specified.
    For PM2M3 and M2M3 hinges, if the symmetry condition is Circular then a single angle
    at 0 degrees is specified.
    For PM2M3 and M2M3 hinges, if the symmetry condition is Double (doubly symmetric)
    then two or more angles are specified where 0 <= angle <= 90. In this case angles must be
    specified at 0 and 90 degrees. Additional angles may be specified between 0 and 90 as
    desired.
    For PM2M3 and M2M3 hinges, if the symmetry condition is None then four or more
    angles are specified where 0 <= angle < 360. In this case angles must be specified at 0,
    90, 180 and 270 degrees. Additional angles may be specified between 0 and 360 as
    desired.
    Table: Hinges Def 08 - Interacting - Deform Control - Force-Deform

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: DOFType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Interacting PM2, Interacting P-M3, Interacting M2-M3, Interacting P-M2-M3.

    Field: CurveNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The moment rotation curve number.

    Page 846 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AxForce
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    An axial force for which moment rotation data is supplied. This item does not apply to
    M2M3 hinges.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    An angle in degrees at which moment rotation data is supplied.
    For PM2 and PM3 hinges, if symmetry exists then a single angle at 0 degrees is specified.
    For PM2 and PM3 hinges, if no symmetry exists then angles at 0 and 180 degrees are
    specified.
    For PM2M3 and M2M3 hinges, if the symmetry condition is Circular then a single angle
    at 0 degrees is specified.
    For PM2M3 and M2M3 hinges, if the symmetry condition is Double (doubly symmetric)
    then two or more angles are specified where 0 <= angle <= 90. In this case angles must be
    specified at 0 and 90 degrees. Additional angles may be specified between 0 and 90 as
    desired.
    For PM2M3 and M2M3 hinges, if the symmetry condition is None then four or more
    angles are specified where 0 <= angle < 360. In this case angles must be specified at 0,
    90, 180 and 270 degrees. Additional angles may be specified between 0 and 360 as
    desired.

    Field: FDPoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    his item is either A, B, C, D or E indicating a point on the specified hinge force
    deformation curve. The MomRatio and RCRatio items listed in the next two columns
    (fields) apply to this point.

    Field: MomRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The moment ratio (Moment/Yield Moment) used to define the specified point (see
    FDPoint column) on the hinge force-deformation curve.
    Page 847 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RCRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Rotation/SF (or Curvature/SF depending on the specified force-deformation type for
    the hinge) used to define the specified point (see FDPoint column) on the hinge forcedeformation curve.
    Table: Hinges Def 09 - Interacting - Deform Control - Acceptance

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: DOFType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Interacting PM2, Interacting P-M3, Interacting M2-M3, Interacting P-M2-M3.

    Field: CurveNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The moment rotation curve number.

    Field: AxForce
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    An axial force for which moment rotation data is supplied. This item does not apply to
    M2M3 hinges.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    An angle in degrees at which moment rotation data is supplied.
    For PM2 and PM3 hinges, if symmetry exists then a single angle at 0 degrees is specified.

    Page 848 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For PM2 and PM3 hinges, if no symmetry exists then angles at 0 and 180 degrees are
    specified.
    For PM2M3 and M2M3 hinges, if the symmetry condition is Circular then a single angle
    at 0 degrees is specified.
    For PM2M3 and M2M3 hinges, if the symmetry condition is Double (doubly symmetric)
    then two or more angles are specified where 0 <= angle <= 90. In this case angles must be
    specified at 0 and 90 degrees. Additional angles may be specified between 0 and 90 as
    desired.
    For PM2M3 and M2M3 hinges, if the symmetry condition is None then four or more
    angles are specified where 0 <= angle < 360. In this case angles must be specified at 0,
    90, 180 and 270 degrees. Additional angles may be specified between 0 and 360 as
    desired.

    Field: ACPoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either IO, LS or CP indicating a particular acceptance criterion. The AC item
    listed in the next column (field) applies to this point. Note that the AC is short for
    Acceptance Criteria.
    IO is short for immediate occupancy, LS is short for life safety and CP is short for collapse
    prevention.

    Field: AC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The rotation (curvature) for the specified acceptance criteria.
    Table: Hinges Def 10 - Interacting - Force Control

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: DOFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.
    Page 849 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CapFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is the lower bound strength capacity factor. Multiplying the hinge interaction surface
    values by this factor defines the lower bound capacity of the hinge.

    Field: DropLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the hinge loses all carrying capacity when the lower bound strength is
    reached. It is No if the hinge remains elastic.

    Field: IO
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The acceptance criterion for immediate occupancy. This item is a ratio with respect to the
    lower bound capacity of the hinge.

    Field: LS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The acceptance criterion for life safety. This item is a ratio with respect to the lower
    bound capacity of the hinge.

    Field: CP
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The acceptance criterion for collapse prevention. This item is a ratio with respect to the
    lower bound capacity of the hinge.
    Table: Hinges Def 11 - Interacting - Interaction Surface - General

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Page 850 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DOFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Field: IntType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User, From Material, Steel: AISC-LRFD, Steel: FEMA-356 or Conc: ACI
    318-02.
    AISC-LRFD interaction surfaces are calculated using AISC LRFD93 Specification
    Equations H1-1a and H1-1b with phi equal to one.
    FEMA-356 interaction surfaces are calculated using FEMA-356. Equation 5-4.
    ACI 318-02 interaction surfaces are constructed with phi equal to one.

    Field: PCurve
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item applies to PM2, PM3 and PM2M3 hinges.
    This item is either Elastic-Plastic or it is Proportional. It refers to the axial forcedeformation characteristics of the hinge. When specified as Proportional it means it is
    proportional to the moment rotation curve interpolated from the specified moment rotation
    surface at the point of first yield in the PMM surface.

    Field: PForM2M3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item only applies to M2M3 hinges. It is the axial force level at which the M2M3
    interaction curve is calculated.

    Field: SymPM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item applies to PM2 and PM3 hinges.
    Page 851 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    This item is Yes if the PM hinge interaction curve is symmetric. Otherwise it is No.

    Field: SymMMandPMM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item applies to M2M3 and PM2M3 hinges.
    This item is either Circular, Double or None indicating the symmetry condition for the
    interaction surface definition.

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to PM2, PM3 and PM2M3 hinges. It is only imported for PM2M3
    hinges.
    This item is the number of separate curves used to define a user-defined interaction
    surface.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points on each curve in a user-defined interaction surface.

    Field: ScaleP
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item applies to PM2, PM3 and PM2M3 hinges. It is the scale factor for the P values
    in a user-defined interaction surface.

    Field: ScaleM2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    This item applies to PM2, M2M3 and PM2M3 hinges. It is the scale factor for the M2
    values in a user-defined interaction surface.

    Page 852 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ScaleM3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    This item applies to PM3, M2M3 and PM2M3 hinges. It is the scale factor for the M3
    values in a user-defined interaction surface.
    Table: Hinges Def 12 - Interacting - Interaction Surface - Data

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: DOFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Field: CurveNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to PM2, PM3 and PM2M3 hinges. It is the curve number in the
    interaction surface.

    Field: PointNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The point number on an interaction curve.

    Field: P
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to PM2, PM3 and PM2M3 hinges. It is the axial force at the specified
    point on the specified curve.

    Page 853 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to PM2, M2M3 and PM2M3 hinges. It is the moment about the 2-axis
    at the specified point on the specified curve.

    Field: M3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to PM3, M2M3 and PM2M3 hinges. It is the moment about the 3-axis
    at the specified point on the specified curve.
    Table: Hinges Def 13 - Fiber - General

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: DefType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either From Section or User Defined indicating the fiber hinge definition option.

    Field: LengthType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    For P, V2 and V3, this item only applies when the force-deformation type is Stress-Strain.
    For T, M2, M3 and PMM, this item only applies when the force-deformation type is
    Moment-Curvature. For Fiber this item is always applicable.
    This item is either Absolute or Relative. It indicates whether on import the Absolute
    length field (SSAbsLen) or the Relative length field (SSRelLen) field will be read.

    Field: SSAbsLen
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The absolute length of a hinge.
    Page 854 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SSRelLen
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The relative length of a hinge. The relative distance is equal to the absolute distance
    divided by the line object length.
    Table: Hinges Def 14 - Fiber - Fiber Data

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: Fiber
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The fiber number.

    Field: Area
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The fiber area.

    Field: Coord3
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The frame local 3-axis coordinate location of the fiber.

    Field: Coord2
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The frame local 2-axis coordinate location of the fiber.

    Page 855 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the fiber.
    Table: Hinges Gen 01 - Overview

    Field: HingeName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Field: DOFType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3, Interacting P-M2, Interacting P-M3,
    Interacting M2-M3, Interacting P-M2-M3, Fiber P-M2-M3.

    Field: Behavior
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Force Controlled or Deformation Controlled indicating the hinge behavior.
    Table: Hinges Gen 02 - Noninteracting - Deform Control - General

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Page 856 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Field: DOFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Field: Symmetric
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes, indicating that the hinge is symmetric, or it is No. Symmetric
    means that the negative force deformation behavior is the same as the positive force
    deformation behavior.

    Field: BeyondE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is To Zero or Extrapolated, indicating the force deformation behavior of the
    hinge beyond point E.

    Field: FDType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Force-Displ, Moment-Rot, Stress-Strain or Moment-Curve indicating
    the type of force-deformation specified.
    .

    Page 857 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UseYldForce
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No. Yes means that the specified forces or moments used to
    define the hinge force deformation curve are to be scaled using the program calculated
    yield force of the section to which the hinge is assigned.

    Field: UseYldDispl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No. Yes means that the specified displacements or rotations used
    to define the hinge force deformation curve are to be scaled using the program calculated
    (approximate) yield displacement or rotation of the section to which the hinge is assigned.

    Field: FDPosForSF
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The scale factor used to scale positive forces when the force-deformation type is ForceDispl.

    Field: FDPosDisSF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The scale factor used to scale positive displacements when the force-deformation type is
    Force-Displ.

    Field: FDNegForSF
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The scale factor used to scale negative forces when the force-deformation type is ForceDispl.

    Field: FDNegDisSF
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The scale factor used to scale negative displacements when the force-deformation type is
    Force-Displ.
    Page 858 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MRPosMoSF
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The scale factor used to scale positive moments when the force-deformation type is
    Moment-Rot.

    Field: MRPosRoSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor used to scale positive rotations when the force-deformation type is
    Moment-Rot.

    Field: MRNegMoSF
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The scale factor used to scale negative moments when the force-deformation type is
    Moment-Rot.

    Field: MRNegRoSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor used to scale negative rotations when the force-deformation type is
    Moment-Rot.

    Field: SSPosStrsSF
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The scale factor used to scale positive stresses when the force-deformation type is StressStrain.

    Field: SSPosStnSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor used to scale positive strains when the force-deformation type is StressStrain.

    Page 859 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SSNegStrsSF
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The scale factor used to scale negative stresses when the force-deformation type is StressStrain.

    Field: SSNegStnSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor used to scale negative strains when the force-deformation type is StressStrain.

    Field: MCPosMoSF
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The scale factor used to scale positive moments when the force-deformation type is
    Moment-Curve.

    Field: MCPosCuSF
    Field is Imported: Yes
    Format: 1/Length (Miscellaneous section of form)
    Units: 1/Length
    The scale factor used to scale positive curvature when the force-deformation type is
    Moment-Curve.

    Field: MCNegMoSF
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The scale factor used to scale negative moments when the force-deformation type is
    Moment-Curve.

    Field: MCNegCuSF
    Field is Imported: Yes
    Format: 1/Length (Miscellaneous section of form)
    Units: 1/Length
    The scale factor used to scale negative curvature when the force-deformation type is
    Moment-Curve.

    Page 860 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LengthType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    For P, V2 and V3, this item only applies when the force-deformation type is Stress-Strain.
    For T, M2, M3 and PMM, this item only applies when the force-deformation type is
    Moment-Curvature.
    It indicates whether on import the Absolute length field (SSAbsLen) or the Relative length
    field (SSRelLen) field will be read.

    Field: SSAbsLen
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The absolute length of a hinge whose force-deformation type is Stress-Strain or MomentCurvature.

    Field: SSRelLen
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The relative length of a hinge whose force-deformation type is Stress-Strain or MomentCurvature. The relative distance is equal to the absolute distance divided by the line
    object length.

    Field: HysType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is eitherIsotropic, Kinematic, Takeda, or Pivot indicating the hysteresis type for the
    hinge.

    Field: PivotAlpha1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The unloading parameter, Alpha1, for the Pivot hysteresis type.

    Page 861 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PivotAlpha2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The unloading parameter, Alpha2, for the Pivot hysteresis type.

    Field: PivotBeta1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The pinching point parameter, Beta1, for the Pivot hysteresis type.

    Field: PivotBeta2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The pinching point parameter, Beta2, for the Pivot hysteresis type.

    Field: PivotEta
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The initial stiffness loss parameter, Eta, for the Pivot hysteresis type.
    Table: Hinges Gen 03 - Noninteracting - Deform Control - Force-Deform

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Page 862 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DOFType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Field: FDPoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either -E, -D, -C, -B, A, B, C, D or E indicating a point on the specified hinge
    force deformation curve. The Force and Displ items listed in the next two columns
    (fields) apply to this point. Note that FD is short for Force-Displacement.

    Field: Force
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The force, moment or stress used to define the specified point (see FDPoint column) on
    the hinge force deformation curve. Note that the units for this item are provided by its
    associated scale factor in the Hinge Force Deformation Information table.

    Field: Displ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The displacement, rotation or strain used to define the specified point (see FDPoint
    column) on the hinge force deformation curve. Note that the units for this item are
    provided by its associated scale factor in the Hinge Force Deformation Information table.
    Table: Hinges Gen 04 - Noninteracting - Deform Control - Acceptance

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Page 863 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Field: DOFType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Field: ACPoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either IO, LS or CP indicating a particular acceptance criterion. The ACPos
    and ACNeg items listed in the next two columns (fields) apply to this point. Note that the
    AC is short for Acceptance Criteria.
    IO is short for immediate occupancy, LS is short for life safety and CP is short for collapse
    prevention.

    Field: ACPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The acceptable positive deformation for the specified acceptance criteria. Note that the
    units for this item are provided by its associated scale factor in a previous table.

    Field: ACNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The acceptable negative deformation for the specified acceptance criteria. Note that the
    units for this item are provided by its associated scale factor in a previous table.
    Table: Hinges Gen 05 - Noninteracting - Force Control

    Page 864 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Field: DOFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Field: Symmetric
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the hinge behavior is symmetric; otherwise it is No.

    Field: DropLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the hinge loses all carrying capacity when the maximum specified load
    is reached. It is No if the hinge remains elastic.

    Field: MaxType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Ratio or Value indicating how the maximum load is specified. Ratio
    means it is specified as the ratio of maximum force (moment) divided by yield force
    (moment). Value means the actual maximum force (moment) is specified.

    Page 865 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RatioPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum allowed positive ratio of maximum force (moment) divided by yield force
    (moment). This item only applies when the MaxType item is Ratio.

    Field: RatioNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum allowed negative ratio of maximum force (moment) divided by yield force
    (moment). This item only applies when the Symmetric item is No and the MaxType item
    is Ratio.

    Field: ForcePos
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The maximum allowed positive force. This item only applies when the MaxType item is
    Value and an axial or shear hinge is specified.

    Field: ForceNeg
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The maximum allowed negative force. This item only applies when Symmetric item is No
    and the MaxType item is Value and an axial or shear hinge is specified.

    Field: MomentPos
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    This item only applies when the MaxType item is Value and an moment or torsion hinge is
    specified.

    Field: MomentNeg
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The maximum allowed negative moment. This item only applies when Symmetric item is
    No and the MaxType item is Value and an moment or torsion hinge is specified.

    Page 866 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IOPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The positive acceptance criterion for immediate occupancy. This item is a force
    (moment) ratio.

    Field: LSPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The positive acceptance criterion for life safety. This item is a force (moment) ratio.

    Field: CPPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The positive acceptance criterion for collapse prevention. This item is a force (moment)
    ratio.

    Field: IONeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The negative acceptance criterion for immediate occupancy. This item is a force
    (moment) ratio. This item only applies when Symmetric item is No.

    Field: LSNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The negative acceptance criterion for life safety. This item is a force (moment) ratio. This
    item only applies when Symmetric item is No.

    Field: CPNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The negative acceptance criterion for collapse prevention. This item is a force (moment)
    ratio. This item only applies when Symmetric item is No.
    Table: Hinges Gen 06 - Interacting - Deform Control - General

    Page 867 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Field: DOFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Interacting PM2, Interacting P-M3, Interacting M2-M3, Interacting P-M2-M3.

    Field: FDType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Moment-Rot or Moment-Curve indicating the type of forcedeformation specified.
    .

    Field: LengthType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies when the force-deformation type is Moment-Curvature.
    It indicates whether on import the Absolute length field (SSAbsLen) or the Relative length
    field (SSRelLen) field will be read.

    Field: SSAbsLen
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The absolute length of a hinge whose force-deformation type Moment-Curvature.
    Page 868 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SSRelLen
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The relative length of a hinge whose force-deformation type is Moment-Curvature. The
    relative distance is equal to the absolute distance divided by the line object length.

    Field: SFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Yield or User Defined indicating the scale factor type. Yield means the
    scale factor is based on the yield rotation or yield curvature depending on the forcedeformation type specified. User Defined means that the scale factor is defined by the
    user.

    Field: UserSFRot
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The user scale factor for rotation. This item only applies when the force-deformation type
    Moment-Rotation and the scale factor type is User Defined.

    Field: UserSFCur
    Field is Imported: Yes
    Format: 1/Length (Miscellaneous section of form)
    Units: 1/Length
    The user scale factor for curvature. This item only applies when the force-deformation
    type Moment-Curvature and the scale factor type is User Defined.

    Field: BeyondE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is To Zero or Extrapolated, indicating the force deformation behavior of the
    hinge beyond point E.

    Field: PMSym
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item only applies to PM2 and PM3 hinges. It is Yes if the moment-rotation (momentcurvature) behavior is symmetric. Otherwise it is No.
    Page 869 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMorMMSym
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies to PM2M3 and M2M3 hinges. This item is either Circular, Double
    or None indicating the moment-rotation (moment-curvature) behavior for the hinge. This
    item only applies to PM2M3 and M2M3 hinges. This item is either Circular, Double or
    None indicating the moment-rotation (moment-curvature) behavior for the hinge. Circular
    means there is circular symmetry, Double means there is double symmetry and None
    means there is No symmetry.

    Field: NumAxForce
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of axial forces specified for moment rotation curves. This item does not
    apply to M2M3 hinges.

    Field: NumAngle
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of angles specified for moment rotation curves.
    Table: Hinges Gen 07 - Interacting - Deform Control - Fs and Angs

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Page 870 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DOFType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Interacting PM2, Interacting P-M3, Interacting M2-M3, Interacting P-M2-M3.

    Field: AxForce
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    An axial force for which moment rotation data is supplied. This item does not apply to
    M2M3 hinges.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    An angle in degrees at which moment rotation data is supplied.
    For PM2 and PM3 hinges, if symmetry exists then a single angle at 0 degrees is specified.
    For PM2 and PM3 hinges, if no symmetry exists then angles at 0 and 180 degrees are
    specified.
    For PM2M3 and M2M3 hinges, if the symmetry condition is Circular then a single angle
    at 0 degrees is specified.
    For PM2M3 and M2M3 hinges, if the symmetry condition is Double (doubly symmetric)
    then two or more angles are specified where 0 <= angle <= 90. In this case angles must be
    specified at 0 and 90 degrees. Additional angles may be specified between 0 and 90 as
    desired.
    For PM2M3 and M2M3 hinges, if the symmetry condition is None then four or more
    angles are specified where 0 <= angle < 360. In this case angles must be specified at 0,
    90, 180 and 270 degrees. Additional angles may be specified between 0 and 360 as
    desired.
    Table: Hinges Gen 08 - Interacting - Deform Control - Force-Deform

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Page 871 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Field: DOFType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Interacting PM2, Interacting P-M3, Interacting M2-M3, Interacting P-M2-M3.

    Field: CurveNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The moment rotation curve number.

    Field: AxForce
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    An axial force for which moment rotation data is supplied. This item does not apply to
    M2M3 hinges.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    An angle in degrees at which moment rotation data is supplied.
    For PM2 and PM3 hinges, if symmetry exists then a single angle at 0 degrees is specified.
    For PM2 and PM3 hinges, if no symmetry exists then angles at 0 and 180 degrees are
    specified.
    For PM2M3 and M2M3 hinges, if the symmetry condition is Circular then a single angle
    at 0 degrees is specified.
    For PM2M3 and M2M3 hinges, if the symmetry condition is Double (doubly symmetric)
    then two or more angles are specified where 0 <= angle <= 90. In this case angles must be

    Page 872 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    specified at 0 and 90 degrees. Additional angles may be specified between 0 and 90 as


    desired.
    For PM2M3 and M2M3 hinges, if the symmetry condition is None then four or more
    angles are specified where 0 <= angle < 360. In this case angles must be specified at 0,
    90, 180 and 270 degrees. Additional angles may be specified between 0 and 360 as
    desired.

    Field: FDPoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    his item is either A, B, C, D or E indicating a point on the specified hinge force
    deformation curve. The MomRatio and RCRatio items listed in the next two columns
    (fields) apply to this point.

    Field: MomRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The moment ratio (Moment/Yield Moment) used to define the specified point (see
    FDPoint column) on the hinge force-deformation curve.

    Field: RCRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Rotation/SF (or Curvature/SF depending on the specified force-deformation type for
    the hinge) used to define the specified point (see FDPoint column) on the hinge forcedeformation curve.
    Table: Hinges Gen 09 - Interacting - Deform Control - Acceptance

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.
    Page 873 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DOFType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Interacting PM2, Interacting P-M3, Interacting M2-M3, Interacting P-M2-M3.

    Field: CurveNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The moment rotation curve number.

    Field: AxForce
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    An axial force for which moment rotation data is supplied. This item does not apply to
    M2M3 hinges.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    An angle in degrees at which moment rotation data is supplied.
    For PM2 and PM3 hinges, if symmetry exists then a single angle at 0 degrees is specified.
    For PM2 and PM3 hinges, if no symmetry exists then angles at 0 and 180 degrees are
    specified.
    For PM2M3 and M2M3 hinges, if the symmetry condition is Circular then a single angle
    at 0 degrees is specified.
    For PM2M3 and M2M3 hinges, if the symmetry condition is Double (doubly symmetric)
    then two or more angles are specified where 0 <= angle <= 90. In this case angles must be
    specified at 0 and 90 degrees. Additional angles may be specified between 0 and 90 as
    desired.
    For PM2M3 and M2M3 hinges, if the symmetry condition is None then four or more
    angles are specified where 0 <= angle < 360. In this case angles must be specified at 0,
    90, 180 and 270 degrees. Additional angles may be specified between 0 and 360 as
    desired.

    Page 874 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ACPoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either IO, LS or CP indicating a particular acceptance criterion. The AC item
    listed in the next column (field) applies to this point. Note that the AC is short for
    Acceptance Criteria.
    IO is short for immediate occupancy, LS is short for life safety and CP is short for collapse
    prevention.

    Field: AC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The rotation (curvature) for the specified acceptance criteria.
    Table: Hinges Gen 10 - Interacting - Force Control

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Field: DOFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Page 875 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CapFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is the lower bound strength capacity factor. Multiplying the hinge interaction surface
    values by this factor defines the lower bound capacity of the hinge.

    Field: DropLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the hinge loses all carrying capacity when the lower bound strength is
    reached. It is No if the hinge remains elastic.

    Field: IO
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The acceptance criterion for immediate occupancy. This item is a ratio with respect to the
    lower bound capacity of the hinge.

    Field: LS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The acceptance criterion for life safety. This item is a ratio with respect to the lower
    bound capacity of the hinge.

    Field: CP
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The acceptance criterion for collapse prevention. This item is a ratio with respect to the
    lower bound capacity of the hinge.
    Table: Hinges Gen 11 - Interacting - Interaction Surface - General

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Page 876 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Field: DOFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Field: IntType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User, From Material, Steel: AISC-LRFD, Steel: FEMA-356 or Conc: ACI
    318-02.
    AISC-LRFD interaction surfaces are calculated using AISC LRFD93 Specification
    Equations H1-1a and H1-1b with phi equal to one.
    FEMA-356 interaction surfaces are calculated using FEMA-356. Equation 5-4.
    ACI 318-02 interaction surfaces are constructed with phi equal to one.

    Field: PCurve
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item applies to PM2, PM3 and PM2M3 hinges.
    This item is either Elastic-Plastic or it is Proportional. It refers to the axial forcedeformation characteristics of the hinge. When specified as Proportional it means it is
    proportional to the moment rotation curve interpolated from the specified moment rotation
    surface at the point of first yield in the PMM surface.

    Page 877 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PForM2M3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item only applies to M2M3 hinges. It is the axial force level at which the M2M3
    interaction curve is calculated.

    Field: SymPM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item applies to PM2 and PM3 hinges.
    This item is Yes if the PM hinge interaction curve is symmetric. Otherwise it is No.

    Field: SymMMandPMM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item applies to M2M3 and PM2M3 hinges.
    This item is either Circular, Double or None indicating the symmetry condition for the
    interaction surface definition.

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to PM2, PM3 and PM2M3 hinges. It is only imported for PM2M3
    hinges.
    This item is the number of separate curves used to define a user-defined interaction
    surface.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points on each curve in a user-defined interaction surface.

    Page 878 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ScaleP
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item applies to PM2, PM3 and PM2M3 hinges. It is the scale factor for the P values
    in a user-defined interaction surface.

    Field: ScaleM2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    This item applies to PM2, M2M3 and PM2M3 hinges. It is the scale factor for the M2
    values in a user-defined interaction surface.

    Field: ScaleM3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    This item applies to PM3, M2M3 and PM2M3 hinges. It is the scale factor for the M3
    values in a user-defined interaction surface.
    Table: Hinges Gen 12 - Interacting - Interaction Surface - Data

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Field: DOFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following indicating the hinge degree of freedom type: Axial P, Shear
    V2, Shear V3, Torsion T, Moment M2, Moment M3.

    Page 879 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CurveNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to PM2, PM3 and PM2M3 hinges. It is the curve number in the
    interaction surface.

    Field: PointNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The point number on an interaction curve.

    Field: P
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to PM2, PM3 and PM2M3 hinges. It is the axial force at the specified
    point on the specified curve.

    Field: M2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to PM2, M2M3 and PM2M3 hinges. It is the moment about the 2-axis
    at the specified point on the specified curve.

    Field: M3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item applies to PM3, M2M3 and PM2M3 hinges. It is the moment about the 3-axis
    at the specified point on the specified curve.
    Table: Hinges Gen 13 - Fiber - General

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.

    Page 880 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Field: DefType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either From Section or User Defined indicating the fiber hinge definition option.

    Field: LengthType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    For P, V2 and V3, this item only applies when the force-deformation type is Stress-Strain.
    For T, M2, M3 and PMM, this item only applies when the force-deformation type is
    Moment-Curvature. For Fiber this item is always applicable.
    This item is either Absolute or Relative. It indicates whether on import the Absolute
    length field (SSAbsLen) or the Relative length field (SSRelLen) field will be read.

    Field: SSAbsLen
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The absolute length of a hinge.

    Field: SSRelLen
    Field is Imported: Yes
    Format: Relative Distance (Structure Dimensions section of form)
    Units: Unitless
    The relative length of a hinge. The relative distance is equal to the absolute distance
    divided by the line object length.
    Table: Hinges Gen 14 - Fiber - Fiber Data

    Field: HingeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a hinge property.
    Page 881 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The hinge property from which the specified generated hinge property was created. This
    is either Auto or it is the name of a user defined hinge property.

    Field: Fiber
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The fiber number.

    Field: Area
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The fiber area.

    Field: Coord3
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The frame local 3-axis coordinate location of the fiber.

    Field: Coord2
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The frame local 2-axis coordinate location of the fiber.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the fiber.
    Table: Joint Added Mass Assignments

    Page 882 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Joint Local or Global indicating the coordinate system in which the joint
    masses are defined.
    In general we recommend defining joint masses in the joint local coordinate system. All
    analyses are performed using the local coordinate system. When masses that are defined
    in the global coordinate system are converted to the joint local coordinate system for
    analysis, all off-diagonal mass values in the joint local system (if any) are ignored. In
    other words, any mass coupling that may occur as a result of the coordinate transformation
    is ignored.

    Field: Mass1
    Field is Imported: Yes
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    Translational mass assigned to the specified joint in the local 1 (or global X) direction.

    Field: Mass2
    Field is Imported: Yes
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    Translational mass assigned to the specified joint in the local 2 (or global Y) direction.

    Field: Mass3
    Field is Imported: Yes
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    Translational mass assigned to the specified joint in the local 3 (or global Z) direction.

    Page 883 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMI1
    Field is Imported: Yes
    Format: Rotational Inertia (Mass and Weight section of form)
    Units: Force-Length-Sec2
    Rotational mass moment of inertia assigned to the specified joint about the local 1 (global
    X) axis.

    Field: MMI2
    Field is Imported: Yes
    Format: Rotational Inertia (Mass and Weight section of form)
    Units: Force-Length-Sec2
    Rotational mass moment of inertia assigned to the specified joint about the local 2 (global
    Y) axis.

    Field: MMI3
    Field is Imported: Yes
    Format: Rotational Inertia (Mass and Weight section of form)
    Units: Force-Length-Sec2
    Rotational mass moment of inertia assigned to the specified joint about the local 3 (global
    Z) axis.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the joint mass assignment is automatically created from a bridge object.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this joint mass assignment is associated. This
    item only applies when the AutoBridge item is True.
    Table: Joint Added Mass By Weight Assignments

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Page 884 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Joint Local or Global indicating the coordinate system in which the joint
    masses are defined.
    In general we recommend defining joint masses in the joint local coordinate system. All
    analyses are performed using the local coordinate system. When masses that are defined
    in the global coordinate system are converted to the joint local coordinate system for
    analysis, all off-diagonal mass values in the joint local system (if any) are ignored. In
    other words, any mass coupling that may occur as a result of the coordinate transformation
    is ignored.

    Field: Weight1
    Field is Imported: Yes
    Format: Weight (Mass and Weight section of form)
    Units: Force
    Translational weight assigned to the specified joint in the local 1 (or global X) direction.

    Field: Weight2
    Field is Imported: Yes
    Format: Weight (Mass and Weight section of form)
    Units: Force
    Translational weight assigned to the specified joint in the local 2 (or global Y) direction.

    Field: Weight3
    Field is Imported: Yes
    Format: Weight (Mass and Weight section of form)
    Units: Force
    Translational weight assigned to the specified joint in the local 3 (or global Z) direction.

    Field: WMI1
    Field is Imported: Yes
    Format: Weight*Length2 (Mass and Weight section of form)
    Units: Force-Length2
    Rotational weight moment of inertia assigned to the specified joint about the local 1
    (global X) axis.

    Page 885 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WMI2
    Field is Imported: Yes
    Format: Weight*Length2 (Mass and Weight section of form)
    Units: Force-Length2
    Rotational weight moment of inertia assigned to the specified joint about the local 2
    (global Y) axis.

    Field: WMI3
    Field is Imported: Yes
    Format: Weight*Length2 (Mass and Weight section of form)
    Units: Force-Length2
    Rotational weight moment of inertia assigned to the specified joint about the local 3
    (global Z) axis.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    .

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this joint mass assignment is associated. This
    item only applies when the AutoBridge item is True.
    Table: Joint Added Mass By Volume Assignments

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Joint Local or Global indicating the coordinate system in which the joint
    masses are defined.
    In general we recommend defining joint masses in the joint local coordinate system. All
    analyses are performed using the local coordinate system. When masses that are defined
    Page 886 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    in the global coordinate system are converted to the joint local coordinate system for
    analysis, all off-diagonal mass values in the joint local system (if any) are ignored. In
    other words, any mass coupling that may occur as a result of the coordinate transformation
    is ignored.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property whose mass per unit volume is multiplied by the specified volume
    to obtain a mass.

    Field: Vol1
    Field is Imported: Yes
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Translational volume assigned to the specified joint in the local 1 (or global X) direction.

    Field: Vol2
    Field is Imported: Yes
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Translational volume assigned to the specified joint in the local 2 (or global Y) direction.

    Field: Vol3
    Field is Imported: Yes
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Translational volume assigned to the specified joint in the local 3 (or global Z) direction.

    Field: VMI1
    Field is Imported: Yes
    Format: Length5 (Modal Factors section of form)
    Units: Length5
    Rotational volume moment of inertia assigned to the specified joint about the local 1
    (global X) axis.

    Field: VMI2
    Field is Imported: Yes
    Format: Length5 (Modal Factors section of form)
    Units: Length5
    Rotational volume moment of inertia assigned to the specified joint about the local 2
    (global Y) axis.
    Page 887 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMI3
    Field is Imported: Yes
    Format: Length5 (Modal Factors section of form)
    Units: Length5
    Rotational volume moment of inertia assigned to the specified joint about the local 3
    (global Z) axis.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the joint mass assignment is automatically created from a bridge object.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this joint mass assignment is associated. This
    item only applies when the AutoBridge item is True.
    Table: Joint Bridge Object Flags

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the joint is automatically created from a bridge object. Otherwise it is
    No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this joint is associated.

    Page 888 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BOSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object with which this joint is associated.

    Field: BOItemType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Bent, Abutment, Hinge or Bearing indicating the portion of the bridge object
    with which this joint is associated.

    Field: BOBent
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge bent property with which this joint is associated. This item is only
    applicable if the BOItemType is Bent.

    Field: BOAbutment
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge abutment property with which this joint is associated. This item is
    only applicable if the BOItemType is Abutment.

    Field: BOBentCol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The column number in the bridge bent with which this joint is associated. This item is
    only applicable if the BOItemType is Bent.

    Field: BOHingeAsgn
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The hinge assignment number in the bridge span with which this joint is associated. This
    item is only applicable if the BOItemType is Hinge.

    Page 889 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BOBearing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge bearing property with which this joint is associated. This item is
    only applicable if the BOItemType is Bearing.

    Field: Station
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The station along the bridge object at which the specified joint exists.
    Table: Joint Constraint Assignments

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint that is assigned the specified constraint.

    Field: Constraint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a constraint.

    Field: Type
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of constraint.
    Table: Joint Coordinates

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Page 890 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system in which the specified joint was last defined (edited).

    Field: CoordType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Cartesian or Cylindrical indicating how the items in the XorR, Y, T, and Z
    fields are to be interpreted. See the documentation of those fields for more information.

    Field: XorR
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    If the CoordType item is Cartesian then this is the X coordinate of the specified joint in the
    coordinate system specified by the CoordSys item.
    If the CoordType item is Cylindrical then this is the R coordinate of the specified joint in
    the coordinate system specified by the CoordSys item.

    Field: Y
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of the specified joint in the coordinate system specified by the CoordSys
    item. This item only applies if the CoordType item is Cartesian.

    Field: T
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The T coordinate of the specified joint in the coordinate system specified by the CoordSys
    item. This item only applies if the CoordType item is Cylindrical.

    Field: Z
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Z coordinate of the specified joint in the coordinate system specified by the CoordSys
    item.
    Page 891 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SpecialJt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    The item is Yes if the specified joint is designated as a Special Joint. Otherwise it is No.
    The significance of a Special joint is that it is not automatically deleted by the graphic
    interface if (or when) no objects are connected to it. If a joint is not designated as a
    special joint, then the graphic interface will always delete it if it is not connected to an
    object.
    If a point is created in the graphic interface using either the Draw menu > Add Special
    Joint command, or its associated toolbar button, then that point is designated as a Special
    Joint. If a point is automatically created in the graphic interface as a result of drawing
    another object, then that joint is not designated as a Special Joint.

    Field: GlobalX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global X coordinate of the specified joint.

    Field: GlobalY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Y coordinate of the specified joint.

    Field: GlobalZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Z coordinate of the specified joint.

    Field: TargetGX
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The target global X coordinate of the displaced shape for a user specified load case. This
    item only applies when the GeomMod item in the Program Control table is Yes. This item
    should not be modified in the database tables.

    Page 892 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TargetGY
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The target global Y coordinate of the displaced shape for a user specified load case. This
    item only applies when the GeomMod item in the Program Control table is Yes. This item
    should not be modified in the database tables.

    Field: TargetGZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The target global Z coordinate of the displaced shape for a user specified load case. This
    item only applies when the GeomMod item in the Program Control table is Yes. This item
    should not be modified in the database tables.

    Field: TargetCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load case for which the target displaced shape applies. This item only applies when
    the GeomMod item in the Program Control table is Yes. This item should not be modified
    in the database tables.

    Field: TargetStage
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The target displaced shape applies at the end of this stage if the TargetCase is a nonlinear
    staged construction case. This item only applies when the GeomMod item in the Program
    Control table is Yes. This item should not be modified in the database tables.

    Field: TargetSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The scale factor used in determining the target displaced shape. This item only applies
    when the GeomMod item in the Program Control table is Yes. This item should not be
    modified in the database tables.

    Page 893 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified joint.
    Table: Joint Loads - Force

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the load pattern is defined.

    Field: F1
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Force applied to the joint in the local 1 direction.
    If the associated coordinate system is the global coordinate system then axes 1, 2 and 3
    correspond to global axes X, Y and Z, respectively.

    Field: F2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Force applied to the joint in the local 2 direction.
    If the associated coordinate system is the global coordinate system then axes 1, 2 and 3
    correspond to global axes X, Y and Z, respectively.

    Page 894 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: F3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Force applied to the joint in the local 3 direction.
    If the associated coordinate system is the global coordinate system then axes 1, 2 and 3
    correspond to global axes X, Y and Z, respectively.

    Field: M1
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment about the local 1-axis applied to the joint.
    If the associated coordinate system is the global coordinate system then axes 1, 2 and 3
    correspond to global axes X, Y and Z, respectively.

    Field: M2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment about the local 2-axis applied to the joint.
    If the associated coordinate system is the global coordinate system then axes 1, 2 and 3
    correspond to global axes X, Y and Z, respectively.

    Field: M3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment about the local 3-axis applied to the joint.
    If the associated coordinate system is the global coordinate system then axes 1, 2 and 3
    correspond to global axes X, Y and Z, respectively.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified joint force load.
    Table: Joint Loads - Ground Displacement

    Page 895 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the load pattern is defined.

    Field: U1
    Field is Imported: Yes
    Format: Translational Displ (Displacements section of form)
    Units: Length
    Translational ground displacement applied to the joint in the local 1 direction. Note that
    the joint must be restrained (or have a spring) in the local 1 direction for this load to be
    active.
    If the associated coordinate system is the global coordinate system then axes 1, 2 and 3
    correspond to global axes X, Y and Z, respectively.

    Field: U2
    Field is Imported: Yes
    Format: Translational Displ (Displacements section of form)
    Units: Length
    Translational ground displacement applied to the joint in the local 2 direction. Note that
    the joint must be restrained (or have a spring) in the local 2 direction for this load to be
    active.
    If the associated coordinate system is the global coordinate system then axes 1, 2 and 3
    correspond to global axes X, Y and Z, respectively.

    Page 896 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U3
    Field is Imported: Yes
    Format: Translational Displ (Displacements section of form)
    Units: Length
    Translational ground displacement applied to the joint in the local 3 direction. Note that
    the joint must be restrained (or have a spring) in the local 3 direction for this load to be
    active.
    If the associated coordinate system is the global coordinate system then axes 1, 2 and 3
    correspond to global axes X, Y and Z, respectively.

    Field: R1
    Field is Imported: Yes
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    Rotational ground displacement applied to the joint about the local 1-axis. Note that the
    joint must be restrained (or have a spring) about the local 1-axis for this load to be active.
    If the associated coordinate system is the global coordinate system then axes 1, 2 and 3
    correspond to global axes X, Y and Z, respectively.

    Field: R2
    Field is Imported: Yes
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    Rotational ground displacement applied to the joint about the local 2-axis. Note that the
    joint must be restrained (or have a spring) about the local 2-axis for this load to be active.
    If the associated coordinate system is the global coordinate system then axes 1, 2 and 3
    correspond to global axes X, Y and Z, respectively.

    Field: R3
    Field is Imported: Yes
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    Rotational ground displacement applied to the joint about the local 3-axis. Note that the
    joint must be restrained (or have a spring) about the local 3-axis for this load to be active.
    If the associated coordinate system is the global coordinate system then axes 1, 2 and 3
    correspond to global axes X, Y and Z, respectively.
    Table: Joint Local Axes Assignments 1 - Typical

    Page 897 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the joint.

    Field: AngleA
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    AngleA, AngleB and AngleC define the rotation of the joint local coordinate system
    relative to the coordinate system determined from the reference vectors. In the case where
    the default reference vectors are used, the angles define the orientation of the local
    coordinate system with respect to the global axes.
    The orientation of the local coordinate system is obtained according to the following
    procedure: (1) The local system is first rotated about its 3 axis by AngleA. (2) The local
    system is next rotated about its resulting +2 axis by AngleB. (3) The local system is lastly
    rotated about its resulting +1 axis by AngleC. Note that the order in which these rotations
    are performed is important.

    Field: AngleB
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    AngleA, AngleB and AngleC define the rotation of the joint local coordinate system
    relative to the coordinate system determined from the reference vectors. In the case where
    the default reference vectors are used, the angles define the orientation of the local
    coordinate system with respect to the global axes.
    The orientation of the local coordinate system is obtained according to the following
    procedure: (1) The local system is first rotated about its 3 axis by AngleA. (2) The local
    system is next rotated about its resulting +2 axis by AngleB. (3) The local system is lastly
    rotated about its resulting +1 axis by AngleC. Note that the order in which these rotations
    are performed is important.

    Field: AngleC
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    AngleA, AngleB and AngleC define the rotation of the joint local coordinate system
    relative to the coordinate system determined from the reference vectors. In the case where
    the default reference vectors are used, the angles define the orientation of the local
    coordinate system with respect to the global axes.

    Page 898 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    The orientation of the local coordinate system is obtained according to the following
    procedure: (1) The local system is first rotated about its 3 axis by AngleA. (2) The local
    system is next rotated about its resulting +2 axis by AngleB. (3) The local system is lastly
    rotated about its resulting +1 axis by AngleC. Note that the order in which these rotations
    are performed is important.

    Field: AdvanceAxes
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if an advanced method is used to define the local axes reference vectors
    for the joint. Otherwise it is No meaning that the default reference vectors are used.
    In the default system the joint positive local 1, 2 and 3 axes are parallel to the global
    positive X, Y and Z axes, respectively.
    In the advanced system the joint local axes are defined with respect to user-defined
    reference vectors. Note that when the advanced system is used, the specified Angle is
    applied to the local axes orientation defined by the user specified reference vectors.
    Table: Joint Local Axes Assignments 2 - Advanced

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: LocalPlane
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the local plane that is to be determined by the plane reference vector.
    It is either 12, 13, 21, 23, 31, or 32.

    Field: AxOption1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Coord Dir, Two Joints or User Vector indicating the first method used to
    determine the axial reference vector.

    Page 899 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AxCoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system used to define the axial reference vector coordinate direction and
    the axial user vector.

    Field: AxCoordDir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Axial coordinate direction taken at the joint in the specified coordinate system and used to
    define the axis reference vector. It may be one of +X, +Y, +Z, +CR, +CA, +CZ, +SB,
    +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Field: AxVecJt1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    AxVecJt1 and AxVecJt2 are the labels of two joints that define the axis reference vector.
    If one of these items is reported as None then it means the current joint. If both of these
    items is reported as None then this option is not used to define the axis reference vector.

    Field: AxVecJt2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    AxVecJt1 and AxVecJt2 are the labels of two joints that define the axis reference vector.
    If one of these items is reported as None then it means the current joint. If both of these
    items is reported as None then this option is not used to define the axis reference vector.

    Field: PlOption1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Coord Dir, Two Joints or User Vector indicating the first method used to
    determine the plane reference vector.

    Page 900 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlCoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system used to define the plane reference vector coordinate directions and
    the plane user vector.

    Field: CoordDir1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    primary coordinate direction taken at the joint in the specified coordinate system. It is used
    to determine the plane reference vector. It may be one of +X, +Y, +Z, +CR, +CA, +CZ,
    +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Field: CoordDir2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    secondary coordinate direction taken at the joint in the specified coordinate system. It is
    used to determine the plane reference vector. It may be one of +X, +Y, +Z, +CR, +CA,
    +CZ, +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Field: PlVecJt1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    PlVecJt1 and PlVecJt2 are the labels of two joints that define the plane reference vector.
    Either of these items may be specified as None to indicate the current joint. If both
    PlVecJt1 and PlVecJt2 are specified as None then they are not used to define the plane
    reference vector.

    Field: PlVecJt2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    PlVecJt1 and PlVecJt2 are the labels of two joints that define the plane reference vector.
    Either of these items may be specified as None to indicate the current joint. If both
    PlVecJt1 and PlVecJt2 are specified as None then they are not used to define the plane
    reference vector.

    Page 901 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AxVecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    X direction component of the axis reference vector in the coordinate system defined by the
    CoordSys item.

    Field: AxVecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Y direction component of the axis reference vector in the coordinate system defined by the
    CoordSys item.

    Field: AxVecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Z direction component of the axis reference vector in the coordinate system defined by the
    CoordSys item.

    Field: PlVecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    X direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.

    Field: PlVecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Y direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.

    Field: PlVecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Z direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.
    Table: Joint Merge Number Assignments

    Page 902 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: MergeNumber
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The merge number for the joint. This item is used to control whether joints in the same
    location automatically merge or remain two separate joints. The merge number is also
    used to determine if a joint can be constrained using an auto edge constraint to the edge of
    an area object or a solid object.
    Two joints can not automatically merge unless both joints have the same merge number.
    A joint can not be automatically constrained to the edge of an area object or solid object
    unless it has the same merge number as at least one of the two point objects at the end of
    the edge.
    Table: Joint Panel Zone Assignments

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: PZFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Elastic, User or Link. It identifies how the panel zone properties are defined.
    In the Assign Panel Zone form that appears when you select a point and click the Assign
    menu > Joint/Point > Panel Zone command there are four options for the panel zone
    properties. They are:
    Elastic properties from column,
    Elastic properties from column and doubler plate,
    Specified spring properties, and
    Specified link property.
    The PZFrom item is specified as Elastic for each of the first two options above. The
    DoublerPl item in the output table tells you if a doubler plate is considered in the
    properties. If a nonzero doubler plate thickness is reported then the doubler plate is
    considered when computing the panel zone properties.
    Page 903 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    The PZFrom item is specified as User when there are specified spring properties. These
    spring properties are reported in the MajorStiff and MinorStiff items in the output table.
    The PZFrom item is specified as Link when there is a specified link property. The link
    object name is reported in the PZLink item in the output table.

    Field: DoublerPl
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the doubler plate.

    Field: MajorStiff
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Specified panel zone rotational spring stiffness for major axis bending (about the local3axis of the column and panel zone).

    Field: MinorStiff
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    Specified panel zone rotational spring stiffness for minor axis bending (about the local2axis of the column and panel zone).

    Field: PZLink
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a link property specified to define the panel zone properties.

    Field: PZConnect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either 'Beams to Other Objects' or 'Braces to Other Objects' indicating how
    the panel zone connects the elements at the specified joint.

    Page 904 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AxesFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Column or User indicating how the local axes of the panel zone are
    defined. If the axes are user-defined then the PZAxesAngle item defines the orientation of
    the panel zone local axes. The user defined option only applies when the panel zone is
    defined from a link property.

    Field: PZAxesAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    This item only applies if the PZFrom item is Link and the AxesFrom item is User. It is the
    angle measured counter-clockwise from the positive global X-axis to the local 2-axis of
    the panel zone.
    Table: Joint Pattern Assignments

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: Pattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the specified joint pattern.

    Field: Value
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Joint pattern value at the specified joint.
    Table: Joint Pattern Definitions

    Field: Pattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the specified joint pattern.

    Page 905 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the joint pattern is automatically created from a bridge object.
    Otherwise it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this joint pattern (that was automatically created
    from a bridge object) is associated. This item only applies when the AutoBridge item is
    True.

    Field: BridgePType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Odd or Even indicating how the joint pattern (that was automatically created
    from a bridge object) is used by the associated bridge object. This item only applies when
    the AutoBridge item is True.

    Field: BridgeLPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Thhe name of the load pattern for which the joint pattern (that was automatically created
    from a bridge object) was created. This item only applies when the AutoBridge item is
    True.
    Table: Joint Punching Load Assignments

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Page 906 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JtActive
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the joint is designated as active for the punching load check. Otherwise
    it is No.
    If the joint is not active then no punching load checks are performed for it when the
    punching load check is run.

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: FrmActive
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the frame member is designated as active for the punching load check at
    the specified joint. Otherwise it is No.
    If the frame is not active then no punching load checks are performed for it at the specified
    joint when the punching load check is run.

    Field: UserFType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the FType item is user-defined and No if it is program determined.

    Field: FType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Chord or Brace indicating the frame type assumed for the punching load
    check.

    Page 907 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UserSection
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the Section item is user-defined and No if it is program determined
    based on the section property assigned to the line object (frame).

    Field: Section
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The section property used for the punching load check.

    Field: Class
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The joint classification associated with a Brace-type element. This is either K Overlap, K
    Gap, T & Y, Cross w/o Diaph, or Cross with Diaph.
    The default classification is T & Y.

    Field: Gap
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The gap length associated with a Brace-type element that has a K Gap joint classification.
    This item is only applicable when the Class item is K Gap.

    Field: UserAngle
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the Angle item is user-defined and No if it is program determined.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured in degrees from the Chord-type element to the Brace-type element.
    This item is only applicable to Brace-type elements.
    .
    Page 908 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: QqAxial
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Qq factor for axial load used in evaluating the punching load. If this item is zero then
    QqAxial is to be determined by the program. The default value is zero.
    Note that QqAxial is used for working stress design when the punching shear method is
    used.

    Field: QqMomIn
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Qq factor for in-plane bending used in evaluating the punching load. If this item is
    zero then QqMomIn is to be determined by the program. The default value is zero.
    Note that QqMomIn is used for working stress design when the punching shear method is
    used.

    Field: QqMomOut
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Qq factor for out-of-plane bending used in evaluating the punching load. If this item
    is zero then QqMomOut is to be determined by the program. The default value is zero.
    Note that QqMomOut is used for working stress design when the punching shear method
    is used.

    Field: QuAxial
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Qu factor for axial load used in evaluating the punching load. If this item is zero then
    QuAxial is to be determined by the program. The default value is zero.
    Note that QuAxial is used for working stress design when the nominal load method is used
    and for LRFD design.

    Page 909 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: QuMomIn
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Qu factor for in-plane bending used in evaluating the punching load. If this item is
    zero then QuMomIn is to be determined by the program. The default value is zero.
    Note that QuMomIn is used for working stress design when the nominal load method is
    used and for LRFD design.

    Field: QuMomOut
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Qu factor for out-of-plane bending used in evaluating the punching load. If this item
    is zero then QuMomOut is to be determined by the program. The default value is zero.
    Note that QuMomOut is used for working stress design when the nominal load method is
    used and for LRFD design.

    Field: QfAxial
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Qf factor for axial load used in evaluating the punching load. If this item is zero then
    QfAxial is to be determined by the program. The default value is zero.

    Field: QfMomIn
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Qf factor for in-plane bending used in evaluating the punching load. If this item is
    zero then QfMomIn is to be determined by the program. The default value is zero.

    Field: QfMomOut
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Qf factor for out-of-plane bending used in evaluating the punching load. If this item
    is zero then QfMomOut is to be determined by the program. The default value is zero.

    Page 910 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiJAxial
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Phi subscript J factor for axial load used in evaluating the punching load. If this item
    is zero then PhiJAxial is to be determined by the program. The default value is zero.

    Field: PhiJMomIn
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Phi subscript J factor for in-plane bending used in evaluating the punching load. If
    this item is zero then PhiJMomIn is to be determined by the program. The default value is
    zero.

    Field: PhiJMomOut
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Phi subscript J factor for out-of-plane bending used in evaluating the punching load.
    If this item is zero then PhiJMomOut is to be determined by the program. The default
    value is zero.

    Field: WeldThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The lesser of the weld throat thickness or the thickness t of the thinner brace. This item is
    only applicable for braces with a K Overlap class.
    .

    Field: Vwa
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The AISC allowable shear stress for weld between the braces.
    This item is only applicable for braces with a K Overlap class that are using allowable
    stress design.

    Page 911 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiWeld
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The AISC resistance factor for the weld.
    This item is only applicable for braces with a K Overlap class that are using LRFD design.

    Field: L1OverL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The circumference for that portion of the brace that contacts the chord (L1) divided by the
    circumference of the brace contact with the chord neglecting the presence of the overlap.
    This item is only applicable for braces with a K Overlap class.

    Field: L2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The projected chord length (one side) of the overlapping weld, measured perpendicular to
    the chord, in an overlapping joint.
    This item is only applicable for braces with a K Overlap class.
    Table: Joint Restraint Assignments

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: U1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the U1 degree of freedom is restrained at the specified joint. Otherwise
    it is No.

    Page 912 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the U2 degree of freedom is restrained at the specified joint. Otherwise
    it is No.

    Field: U3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the U3 degree of freedom is restrained at the specified joint. Otherwise
    it is No.

    Field: R1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the R1 degree of freedom is restrained at the specified joint. Otherwise
    it is No.

    Field: R2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the R2 degree of freedom is restrained at the specified joint. Otherwise
    it is No.

    Field: R3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the R3 degree of freedom is restrained at the specified joint. Otherwise
    it is No.
    Table: Joint Spring Assignments 1 - Uncoupled

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Page 913 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the joint springs are defined.

    Field: U1
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The spring stiffness in the U1 (UX) direction for the specified coordinate system at the
    indicated joint.

    Field: U2
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The spring stiffness in the U2 (UY) direction for the specified coordinate system at the
    indicated joint.

    Field: U3
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The spring stiffness in the U3 (UZ) direction for the specified coordinate system at the
    indicated joint.

    Field: R1
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The spring stiffness in the R1 (RX) direction for the specified coordinate system at the
    indicated joint.

    Field: R2
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The spring stiffness in the R2 (RY) direction for the specified coordinate system at the
    indicated joint.

    Page 914 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R3
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The spring stiffness in the R3 (RZ) direction for the specified coordinate system at the
    indicated joint.
    Table: Joint Spring Assignments 2 - Coupled

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the joint springs are defined.

    Field: U1
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The spring stiffness in the U1 (UX) direction for the specified coordinate system at the
    indicated joint.

    Field: U1U2
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The spring stiffness in the U1U2 (UXUY) direction for the specified coordinate system at
    the indicated joint.

    Field: U2
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The spring stiffness in the U2 (UY) direction for the specified coordinate system at the
    indicated joint.

    Page 915 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U1U3
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The spring stiffness in the U1U3 (UXUZ) direction for the specified coordinate system at
    the indicated joint.

    Field: U2U3
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The spring stiffness in the U2U3 (UYUZ) direction for the specified coordinate system at
    the indicated joint.

    Field: U3
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The spring stiffness in the U3 (UZ) direction for the specified coordinate system at the
    indicated joint.

    Field: U1R1
    Field is Imported: Yes
    Format: TransRot Coupled Stiff (Stiffness section of form)
    Units: Force/rad
    The spring stiffness in the U1R1 (UXRX) direction for the specified coordinate system at
    the indicated joint.

    Field: U2R1
    Field is Imported: Yes
    Format: TransRot Coupled Stiff (Stiffness section of form)
    Units: Force/rad
    The spring stiffness in the U2R1 (UYRX) direction for the specified coordinate system at
    the indicated joint.

    Field: U3R1
    Field is Imported: Yes
    Format: TransRot Coupled Stiff (Stiffness section of form)
    Units: Force/rad
    The spring stiffness in the U3R1 (UZRX) direction for the specified coordinate system at
    the indicated joint.

    Page 916 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R1
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The spring stiffness in the R1 (RX) direction for the specified coordinate system at the
    indicated joint.

    Field: U1R2
    Field is Imported: Yes
    Format: TransRot Coupled Stiff (Stiffness section of form)
    Units: Force/rad
    The spring stiffness in the U1R2 (UXRY) direction for the specified coordinate system at
    the indicated joint.

    Field: U2R2
    Field is Imported: Yes
    Format: TransRot Coupled Stiff (Stiffness section of form)
    Units: Force/rad
    The spring stiffness in the U2R2 (UYRY) direction for the specified coordinate system at
    the indicated joint.

    Field: U3R2
    Field is Imported: Yes
    Format: TransRot Coupled Stiff (Stiffness section of form)
    Units: Force/rad
    The spring stiffness in the U3R2 (UZRY) direction for the specified coordinate system at
    the indicated joint.

    Field: R1R2
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The spring stiffness in the R1R2 (RXRY) direction for the specified coordinate system at
    the indicated joint.

    Field: R2
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The spring stiffness in the R2 (RY) direction for the specified coordinate system at the
    indicated joint.

    Page 917 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U1R3
    Field is Imported: Yes
    Format: TransRot Coupled Stiff (Stiffness section of form)
    Units: Force/rad
    The spring stiffness in the U1R3 (UXRZ) direction for the specified coordinate system at
    the indicated joint.

    Field: U2R3
    Field is Imported: Yes
    Format: TransRot Coupled Stiff (Stiffness section of form)
    Units: Force/rad
    The spring stiffness in the U2R3 (UYRZ) direction for the specified coordinate system at
    the indicated joint.

    Field: U3R3
    Field is Imported: Yes
    Format: TransRot Coupled Stiff (Stiffness section of form)
    Units: Force/rad
    The spring stiffness in the U3R3 (UZRZ) direction for the specified coordinate system at
    the indicated joint.

    Field: R1R3
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The spring stiffness in the R1R3 (RXRZ) direction for the specified coordinate system at
    the indicated joint.

    Field: R2R3
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The spring stiffness in the R2R3 (RYRZ) direction for the specified coordinate system at
    the indicated joint.

    Field: R3
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The spring stiffness in the R3 (RZ) direction for the specified coordinate system at the
    indicated joint.
    Table: Joint Vehicle Response Component Overwrites

    Page 918 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: Usage
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Superstructure, AASHTO HL - Reaction indicating the vehicle type and
    structural member type to which the overwrite applies.
    AASHTO HL - Reaction refers to reactions at interior supports (piers).

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either F1, F2, F3, T, M2, M3 or indicating the output component to which the
    overwrite applies.

    Field: Status
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Do Not Use, Use Positive Values, Use Negative Values, or Use All Values
    indicating the portion of the output for the specified component to which the overwrite
    applies.
    Table: Lane Centerline Points

    Field: Lane
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a lane.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    A point along the lane centerline. These points are calculated by the program from the
    lane definition data.
    Page 919 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The coordinate system in which the X, Y and Z coordinates of the specified point along
    the lane centerline are reported.

    Field: X
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The X coordinate of the specified point along the lane centerline in the specified
    coordinate system.

    Field: Y
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of the specified point along the lane centerline in the specified
    coordinate system.

    Field: Z
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Z coordinate of the specified point along the lane centerline in the specified
    coordinate system.

    Field: GlobalX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The X coordinate of the specified point along the lane centerline in the global coordinate
    system.

    Field: GlobalY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Y coordinate of the specified point along the lane centerline in the global coordinate
    system.

    Page 920 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GlobalZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Z coordinate of the specified point along the lane centerline in the global coordinate
    system.
    Table: Lane Definition Data

    Field: Lane
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a lane.

    Field: LaneFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Layout Line or Frame indicating the item (method) used to define the lane.

    Field: LayoutLine
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge layout line with which the specified station is associated. This
    item only applies when the LaneFrom item is Layout Line.

    Field: Station
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    A station along the specified bridge layout line. This item only applies when the
    LaneFrom item is Layout Line.

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A frame object from which the lane is defined. This item only applies when the LaneFrom
    item is Frame.

    Page 921 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Width
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    If the LaneFrame item is Layout Line then this is the width of the lane at the specified
    station.
    If the LaneFrame item is Frame then this is the width of the lane along the specified frame
    object.

    Field: Offset
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    If the LaneFrame item is Layout Line then this is the offset at the specified station from
    the bridge layout line to the center line of the lane. The offset is measured perpendicular
    to the bridge layout line.
    When looking along the bridge layout line toward the next larger station, a positive offset
    is to the right side of the layout line. This is consistent with the frame local axes
    coordinate system with the positive local 1 axis along the layout line (pointing from a
    smaller to a larger station), the local 2 axis pointing up and the local 3 axis horizontal. A
    positive offset is in the positive direction of the local 3 axis.
    If the LaneFrame item is Frame then this is the offset of the centerline of the lane from the
    specified frame object. When looking from the start of the lane toward the end of the lane
    a positive offset is to the right of the frame object.

    Field: LoadGroup
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the objects that the lane loads. It is either Default or the name of a
    group. Default means that the program determines which objects are loaded. If a group is
    specified then only the objects in that group are loaded by the lane.

    Field: DiscAlong
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum lane load discretization length along the length of the lane.

    Page 922 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DiscAcross
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum lane load discretization distance across the width of the lane.

    Field: DiscSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the maximum lane load discretization used in the analysis is to not
    exceed some specified fraction of the minimum span length found by the program.
    Otherwise it is No. The fraction of span length used is one over the DiscSpanFac item.

    Field: DiscSpanFac
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    When the maximum lane load discretization used in the analysis is specified to not exceed
    some specified fraction of the minimum span length found by the program, the fraction of
    span length used is one over the DiscSpanFac item.

    Field: DiscLane
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the maximum lane load discretization used in the analysis is to not
    exceed some specified fraction of the lane length. Otherwise it is No. The fraction of lane
    length used is one over the DiscLaneFac item.

    Field: DiscLaneFac
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    When the maximum lane load discretization used in the analysis is specified to not exceed
    some specified fraction of the lane length, the fraction of lane length used is one over the
    DiscLaneFac item.

    Page 923 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LeftType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Exterior or Interior indicating the left lane edge type. This type is used when
    determining how close an vehicle axle load can get to the edge og the lane.

    Field: RightType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Exterior or Interior indicating the right lane edge type. This type is used
    when determining how close an vehicle axle load can get to the edge og the lane.

    Field: Color
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color associated with the
    lane.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.
    Table: Link Bridge Object Flags

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the link object.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link object is automatically created from a bridge object. Otherwise
    it is No.

    Page 924 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this link object is associated.

    Field: BOSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object with which this link object is associated.

    Field: BOItemType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Bent, Abutment, Hinge, Restrainer or Bearing indicating the portion of the
    bridge object with which this link object is associated.

    Field: BOBent
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge bent property with which this link object is associated. This item
    is only applicable if the BOItemType is Bent.

    Field: BOAbutment
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge abutment property with which this link object is associated. This
    item is only applicable if the BOItemType is Abutment.

    Field: BOBentCol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The column number in the bridge bent with which this link object is associated. This item
    is only applicable if the BOItemType is Bent.

    Page 925 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BOHingeAsgn
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The hinge assignment number in the bridge span with which this link object is associated.
    This item is only applicable if the BOItemType is Hinge or Restrainer.

    Field: BOBearing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge bearing property with which this link object is associated. This
    item is only applicable if the BOItemType is Bearing.

    Field: StartSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The station along the bridge object at which the specified link starts.

    Field: EndSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The station along the bridge object at which the specified link ends.
    Table: Link Frequency Dependent Properties 01 - General

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link frequency dependent property.

    Field: Color
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color associated with the
    property.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,

    Page 926 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified frequency dependent link property.

    Field: Notes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    User notes for the specified frequency dependent link property.
    Table: Link Frequency Dependent Properties 02 - Details

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link frequency dependent property.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This may be U1, U2, U3, R1, R2, R3, U1U2, U1U3, U2U3, U1R1, U2R1, U3R1, U1R2,
    U2R2, U3R2, R1R2, U1R3, U2R3, U3R3, R1R3, or R2R3 indicating the link property
    degree of freedom considered.

    Field: Frequency
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The frequency at which the specified stiffness and damping apply.

    Field: TransK
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The link property stiffness (real part of the complex impedance) for the specified
    translational or coupled translational degree of freedom at the specified frequency. This
    item only applies when the DOF item is U1, U2, U3, U1U2, U1U3 or U2U3.
    Page 927 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RotK
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The link property stiffness (real part of the complex impedance) for the specified
    rotational or coupled rotational degree of freedom at the specified frequency. This item
    only applies when the DOF item is R1, R2, R3, R1R2, R1R3 or R2R3.

    Field: TransRotK
    Field is Imported: Yes
    Format: TransRot Coupled Stiff (Stiffness section of form)
    Units: Force/rad
    The link property stiffness (real part of the complex impedance) for the specified coupled
    translational-rotational degree of freedom at the specified frequency. This item only
    applies when the DOF item is U1R1, U2R1, U3R1, U1R2, U2R2, U3R2, U1R3, U2R3
    OR U3R3.

    Field: TransC
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The link property damping (imaginary part of the complex impedance) for the specified
    translational or coupled translational degree of freedom at the specified frequency. This
    item only applies when the DOF item is U1, U2, U3, U1U2, U1U3 or U2U3.

    Field: RotC
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The link property damping (imaginary part of the complex impedance) for the specified
    rotational or coupled rotational degree of freedom at the specified frequency. This item
    only applies when the DOF item is R1, R2, R3, R1R2, R1R3 or R2R3.

    Field: TransRotC
    Field is Imported: Yes
    Format: TransRot Coupled Stiff (Stiffness section of form)
    Units: Force/rad
    The link property damping (imaginary part of the complex impedance) for the specified
    coupled translational-rotational degree of freedom at the specified frequency. This item
    only applies when the DOF item is U1R1, U2R1, U3R1, U1R2, U2R2, U3R2, U1R3,
    U2R3 OR U3R3.
    Table: Link Loads - Deformation

    Page 928 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Link object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: IncludeU1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the U1 degree of freedom. Otherwise it is
    No.

    Field: IncludeU2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the U2 degree of freedom. Otherwise it is
    No.

    Field: IncludeU3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the U3 degree of freedom. Otherwise it is
    No.

    Field: IncludeR1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the R1 degree of freedom. Otherwise it is
    No.

    Page 929 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IncludeR2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the R2 degree of freedom. Otherwise it is
    No.

    Field: IncludeR3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the R3 degree of freedom. Otherwise it is
    No.

    Field: U1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item is the deformation specified for the U1 degree of freedom.

    Field: U2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item is the deformation specified for the U2 degree of freedom.

    Field: U3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item is the deformation specified for the U3 degree of freedom.

    Field: R1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the deformation specified for the R1 degree of freedom.

    Page 930 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the deformation specified for the R2 degree of freedom.

    Field: R3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the deformation specified for the R3 degree of freedom.
    Table: Link Loads - Gravity

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Link object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the gravity loads are defined.

    Field: MultiplierX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the X-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.

    Page 931 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MultiplierY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the Y-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.

    Field: MultiplierZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the Z-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.
    Table: Link Loads - Target Force

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Link object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: IncludeP
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the P degree of freedom. Otherwise it is
    No.

    Field: IncludeV2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the V2 degree of freedom. Otherwise it is
    No.

    Page 932 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IncludeV3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the V3 degree of freedom. Otherwise it is
    No.

    Field: IncludeT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the T degree of freedom. Otherwise it is
    No.

    Field: IncludeM2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the M2 degree of freedom. Otherwise it is
    No.

    Field: IncludeM3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the M3 degree of freedom. Otherwise it is
    No.

    Field: P
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item is the target force specified for the P degree of freedom.

    Field: V2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item is the target force specified for the V2 degree of freedom.

    Page 933 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item is the target force specified for the V3 degree of freedom.

    Field: T
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    This item is the target force specified for the T degree of freedom.

    Field: M2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    This item is the target force specified for the M2 degree of freedom.

    Field: M3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    This item is the target force specified for the M3 degree of freedom.

    Field: RelLocP
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the P
    degree of freedom is located.

    Field: RelLocV2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the
    V2 degree of freedom is located.

    Page 934 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RelLocV3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the
    V3 degree of freedom is located.

    Field: RelLocT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the T
    degree of freedom is located.

    Field: RelLocM2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the
    M2 degree of freedom is located.

    Field: RelLocM3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the
    M3 degree of freedom is located.
    Table: Link Local Axes Assignments 1 - Typical

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the link object.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle that the local 2 and 3 axes are rotated about the positive local 1 axis, from the
    default orientation or from the orientation determined by the plane reference vector (and if
    it is a single-joint link object, the axis reference vector). The rotation for a positive angle
    appears counterclockwise when the local +1 axis is pointing toward you.
    Page 935 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AdvanceAxes
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if an advanced method is used to define the local axes reference vectors
    for the link. Otherwise it is No meaning that the default reference vectors are used.
    Note that QqAxial is used for working stress design when the punching shear method is
    used.
    Advanced means that the local axes are defined with respect to user-defined reference
    vectors.
    Table: Link Local Axes Assignments 2 - Advanced

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the link object.

    Field: LocalPlane
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the local plane that is to be determined by the plane reference vector.
    It is either 12 or 13, indicating the 1-2 or the 1-3 plane, respectively.

    Field: AxOption1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Coord Dir, Two Joints or User Vector indicating the first method used to
    determine the axial reference vector.

    Field: AxCoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system used to define the axial reference vector coordinate direction and
    the axial user vector.

    Page 936 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AxCoordDir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Axial coordinate direction taken at the link center in the specified coordinate system and
    used to define the axis reference vector. It may be one of +X, +Y, +Z, +CR, +CA, +CZ,
    +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR. This item is only applicable
    to single-joint link objects.

    Field: AxVecJt1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    AxVecJt1 and AxVecJt2 are the labels of two joints that define the axis reference vector
    for single joint link objects. If one of these items is reported as None then it means the
    link object center. If both items are reported as None then this option is not used to define
    the axis reference vector. These items do not apply to two-joint link objects.

    Field: AxVecJt2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    AxVecJt1 and AxVecJt2 are the labels of two joints that define the axis reference vector
    for single joint link objects. If one of these items is reported as None then it means the
    link object center. If both items are reported as None then this option is not used to define
    the axis reference vector. These items do not apply to two-joint link objects.

    Field: PlOption1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Coord Dir, Two Joints or User Vector indicating the first method used to
    determine the plane reference vector.

    Field: PlCoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system used to define the plane reference vector coordinate directions and
    the plane user vector.

    Page 937 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordDir1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    primary coordinate direction taken at the object center in the specified coordinate system.
    It is used to determine the reference vector. It may be one of +X, +Y, +Z, +CR, +CA,
    +CZ, +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Field: CoordDir2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    secondary coordinate direction taken at the object center in the specified coordinate
    system. It is used to determine the reference vector. It may be one of +X, +Y, +Z, +CR,
    +CA, +CZ, +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Field: PlVecJt1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    PlVecJt1 and PlVecJt2 are the labels of two joints that define the plane reference vector.
    Either of these joints may be specified as None to indicate the center of the specified
    object. If both PlVecJt1 and PlVecJt2 are specified as None then they are not used to
    define the plane reference vector.

    Field: PlVecJt2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    PlVecJt1 and PlVecJt2 are the labels of two joints that define the plane reference vector.
    Either of these joints may be specified as None to indicate the center of the specified
    object. If both PlVecJt1 and PlVecJt2 are specified as None then they are not used to
    define the plane reference vector.

    Field: AxVecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    X direction component of the axis reference vector in the coordinate system defined by the
    CoordSys item.

    Page 938 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AxVecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Y direction component of the axis reference vector in the coordinate system defined by the
    CoordSys item.

    Field: AxVecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Z direction component of the axis reference vector in the coordinate system defined by the
    CoordSys item.

    Field: PlVecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    X direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.

    Field: PlVecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Y direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.

    Field: PlVecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Z direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.
    Table: Link Property Assignments

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Link object.

    Page 939 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LinkType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Linear, MultiLinear Elastic, MultiLinear Plastic, Gap, Hook, Damper, Plastic
    (Wen), Rubber Isolator, Friction Isolator, Product of Inertia about 2-3 T/C Friction Isolator
    indicating the type of link object.

    Field: LinkJoints
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either SingleJoint or TwoJoint indicating the type of link object.

    Field: LinkProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: LinkFDProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either None or the name of a frequency-dependent link property.
    Table: Link Property Definitions 01 - General

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: LinkType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Linear, MultiLinear Elastic, MultiLinear Plastic, Gap, Hook, Damper, Plastic
    (Wen), Rubber Isolator, Friction Isolator, Product of Inertia about 2-3 T/C Friction Isolator
    indicating the type of link object.

    Page 940 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mass
    Field is Imported: Yes
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    Mass assigned to this link property.

    Field: Weight
    Field is Imported: Yes
    Format: Weight (Mass and Weight section of form)
    Units: Force
    Weight assigned to this link property.

    Field: RotInert1
    Field is Imported: Yes
    Format: Rotational Inertia (Mass and Weight section of form)
    Units: Force-Length-Sec2
    Rotational mass moment of inertia about the link local 1-axis assigned to the associated
    link property.

    Field: RotInert2
    Field is Imported: Yes
    Format: Rotational Inertia (Mass and Weight section of form)
    Units: Force-Length-Sec2
    Rotational mass moment of inertia about the link local 2-axis assigned to the associated
    link property.

    Field: RotInert3
    Field is Imported: Yes
    Format: Rotational Inertia (Mass and Weight section of form)
    Units: Force-Length-Sec2
    Rotational mass moment of inertia about the link local 3-axis assigned to the associated
    link property.

    Field: DefLength
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The link property is defined for this length when it is used in a line spring.

    Page 941 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DefArea
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The link property is defined for this area when it is used in an area or solid spring.

    Field: PDM2I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    P-Delta factor for moment at the I-end of the link about the link local 2-axis. This is the
    fraction of the P-Delta moment about the local 2-axis that is resisted as moment at the Iend of the link.
    Note that the P-Delta moment can be resisted by moment at the I-End, moment at the JEnd, and a shear couple where the shears are applied at the I and J ends. PDM2I and
    PDM2J are the fractions of the P-Delta moment about the local 2-axis that is resisted as
    moment at the ends of the link. The remainder of the P-Delta moment about the local 2axis is taken as a shear couple.
    Similarly, PDM3I and PDM3J are the fractions of the P-Delta moment about the local 3axis that is resisted as moment at the ends of the link. The remainder of the P-Delta
    moment about the local 3-axis is taken as a shear couple.

    Field: PDM2J
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    P-Delta factor for moment at the J-end of the link about the link local 2-axis. This is the
    fraction of the P-Delta moment about the local 2-axis that is resisted as moment at the Jend of the link.
    Note that the P-Delta moment can be resisted by moment at the I-End, moment at the JEnd, and a shear couple where the shears are applied at the I and J ends. PDM2I and
    PDM2J are the fractions of the P-Delta moment about the local 2-axis that is resisted as
    moment at the ends of the link. The remainder of the P-Delta moment about the local 2axis is taken as a shear couple.
    Similarly, PDM3I and PDM3J are the fractions of the P-Delta moment about the local 3axis that is resisted as moment at the ends of the link. The remainder of the P-Delta
    moment about the local 3-axis is taken as a shear couple.

    Page 942 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PDM3I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    P-Delta factor for moment at the I-end of the link about the link local 3-axis. This is the
    fraction of the P-Delta moment about the local 3-axis that is resisted as moment at the Iend of the link.
    Note that the P-Delta moment can be resisted by moment at the I-End, moment at the JEnd, and a shear couple where the shears are applied at the I and J ends. PDM2I and
    PDM2J are the fractions of the P-Delta moment about the local 2-axis that is resisted as
    moment at the ends of the link. The remainder of the P-Delta moment about the local 2axis is taken as a shear couple.
    Similarly, PDM3I and PDM3J are the fractions of the P-Delta moment about the local 3axis that is resisted as moment at the ends of the link. The remainder of the P-Delta
    moment about the local 3-axis is taken as a shear couple.

    Field: PDM3J
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    P-Delta factor for moment at the J-end of the link about the link local 3-axis. This is the
    fraction of the P-Delta moment about the local 3-axis that is resisted as moment at the Jend of the link.
    Note that the P-Delta moment can be resisted by moment at the I-End, moment at the JEnd, and a shear couple where the shears are applied at the I and J ends. PDM2I and
    PDM2J are the fractions of the P-Delta moment about the local 2-axis that is resisted as
    moment at the ends of the link. The remainder of the P-Delta moment about the local 2axis is taken as a shear couple.
    Similarly, PDM3I and PDM3J are the fractions of the P-Delta moment about the local 3axis that is resisted as moment at the ends of the link. The remainder of the P-Delta
    moment about the local 3-axis is taken as a shear couple.

    Field: Color
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color associated with the
    property.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.
    Page 943 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified link property.

    Field: Notes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    User notes for the specified link property.
    Table: Link Property Definitions 02 - Linear

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either U1, U2, U3, R1, R2, R3, U1U2, U1U3, U1R1, U1R2, U1R3, U2U3, U2R1,
    U2R2, U2R3, U3R1, U3R2, U3R3, R1R2, R1R3, or R2R3.
    The U1U2, U1U3, U1R1, U1R2, U1R3, U2U3, U2R1, U2R2, U2R3, U3R1, U3R2,
    U3R3, R1R2, R1R3, and R2R3 terms only apply if the properties are coupled.

    Field: Fixed
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is fixed (restrained). It is no if the link property
    DOF is not fixed, that is, it is free to move.

    Field: TransKE
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective stiffness of the link for a translational degree of freedom. This stiffness is
    used for all linear load cases including modal load cases.

    Page 944 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RotKE
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The effective stiffness of the link for a rotational degree of freedom. This stiffness is used
    for all linear load cases including modal load cases.

    Field: TransRotKE
    Field is Imported: Yes
    Format: TransRot Coupled Stiff (Stiffness section of form)
    Units: Force/rad
    The effective stiffness of the link for a coupled translational-rotational degree of freedom.

    Field: TransCE
    Field is Imported: Yes
    Format: Eff Damping - Trans (Damping Items section of form)
    Units: Force-s/Length
    The effective damping of the link for a translational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: RotCE
    Field is Imported: Yes
    Format: Eff Damping - Rot (Damping Items section of form)
    Units: Force-Length-s/rad
    The effective damping of the link for a rotational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: TransRotCE
    Field is Imported: Yes
    Format: Eff Damping - Coupled (Damping Items section of form)
    Units: Force-s/rad
    The effective damping of the link for a coupled translational-rotational degree of freedom.

    Field: DJ
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the J-End of the link to the shear spring. This item only applies to the
    U2 and U3 (shear) degrees of freedom.
    Table: Link Property Definitions 03 - MultiLinear

    Page 945 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This may be either U1, U2, U3, R1, R2 or R3 indicating the link property degree of
    freedom considered.

    Field: Fixed
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is fixed (restrained). It is no if the link property
    DOF is not fixed, that is, it is free to move.

    Field: NonLinear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is nonlinear. It is no if the link property DOF is
    not nonlinear, that is, it is linear.

    Field: TransKE
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective stiffness of the link for a translational degree of freedom. This stiffness is
    used for all linear load cases including modal load cases.

    Field: RotKE
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The effective stiffness of the link for a rotational degree of freedom. This stiffness is used
    for all linear load cases including modal load cases.

    Page 946 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TransCE
    Field is Imported: Yes
    Format: Eff Damping - Trans (Damping Items section of form)
    Units: Force-s/Length
    The effective damping of the link for a translational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: RotCE
    Field is Imported: Yes
    Format: Eff Damping - Rot (Damping Items section of form)
    Units: Force-Length-s/rad
    The effective damping of the link for a rotational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: DJ
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the J-End of the link to the shear spring. This item only applies to the
    U2 and U3 (shear) degrees of freedom.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Designation of a point on the multilinear force-deformation curve.

    Field: Force
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The force at the specified point on the multilinear force-deformation curve. This item only
    applies to translational degrees of freedom (U1, U2 and U3).

    Field: Displ
    Field is Imported: Yes
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The displacement at the specified point on the multilinear force-deformation curve. This
    item only applies to translational degrees of freedom (U1, U2 and U3).

    Page 947 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Moment
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The moment at the specified point on the multilinear force-deformation curve. This item
    only applies to rotational degrees of freedom (R1, R2 and R3).

    Field: Rotation
    Field is Imported: Yes
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotation at the specified point on the multilinear force-deformation curve. This item
    only applies to rotational degrees of freedom (R1, R2 and R3).
    Table: Link Property Definitions 04 - Damper

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This may be either U1, U2, U3, R1, R2 or R3 indicating the link property degree of
    freedom considered.

    Field: Fixed
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is fixed (restrained). It is no if the link property
    DOF is not fixed, that is, it is free to move.

    Field: NonLinear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is nonlinear. It is no if the link property DOF is
    not nonlinear, that is, it is linear.

    Page 948 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TransKE
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective stiffness of the link for a translational degree of freedom. This stiffness is
    used for all linear load cases including modal load cases.

    Field: RotKE
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The effective stiffness of the link for a rotational degree of freedom. This stiffness is used
    for all linear load cases including modal load cases.

    Field: TransCE
    Field is Imported: Yes
    Format: Eff Damping - Trans (Damping Items section of form)
    Units: Force-s/Length
    The effective damping of the link for a translational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: RotCE
    Field is Imported: Yes
    Format: Eff Damping - Rot (Damping Items section of form)
    Units: Force-Length-s/rad
    The effective damping of the link for a rotational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: DJ
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the J-End of the link to the shear spring. This item only applies to the
    U2 and U3 (shear) degrees of freedom.

    Field: TransK
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The initial stiffness of a translational degree of freedom of the link. This item is used for
    nonlinear load cases only.
    Page 949 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RotK
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The initial stiffness of a rotational degree of freedom of the link. This item is used for
    nonlinear load cases only.

    Field: TransC
    Field is Imported: Yes
    Format: NL Damping - Trans (Damping Items section of form)
    Units: Force*(s/Length)^Cexp
    The nonlinear damping coefficient used for translational degrees of freedom. This item is
    used for nonlinear load cases only.

    Field: RotC
    Field is Imported: Yes
    Format: NL Damping - Rot (Damping Items section of form)
    Units: Force-Length*(s/rad)^Cexp
    The nonlinear damping coefficient used for rotational degrees of freedom. This item is
    used for nonlinear load cases only.

    Field: CExp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The nonlinear damping exponent that is applied to the velocity across the damper in the
    equation of motion. This item is used for nonlinear load cases only.
    Table: Link Property Definitions 05 - Gap

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This may be either U1, U2, U3, R1, R2 or R3 indicating the link property degree of
    freedom considered.

    Page 950 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fixed
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is fixed (restrained). It is no if the link property
    DOF is not fixed, that is, it is free to move.

    Field: NonLinear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is nonlinear. It is no if the link property DOF is
    not nonlinear, that is, it is linear.

    Field: TransKE
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective stiffness of the link for a translational degree of freedom. This stiffness is
    used for all linear load cases including modal load cases.

    Field: RotKE
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The effective stiffness of the link for a rotational degree of freedom. This stiffness is used
    for all linear load cases including modal load cases.

    Field: TransCE
    Field is Imported: Yes
    Format: Eff Damping - Trans (Damping Items section of form)
    Units: Force-s/Length
    The effective damping of the link for a translational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: RotCE
    Field is Imported: Yes
    Format: Eff Damping - Rot (Damping Items section of form)
    Units: Force-Length-s/rad
    The effective damping of the link for a rotational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.
    Page 951 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DJ
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the J-End of the link to the shear spring. This item only applies to the
    U2 and U3 (shear) degrees of freedom.

    Field: TransK
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The initial stiffness of a translational degree of freedom of the link. This item is used for
    nonlinear load cases only.

    Field: RotK
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The initial stiffness of a rotational degree of freedom of the link. This item is used for
    nonlinear load cases only.

    Field: TransOpen
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The initial gap opening for a translational degree of freedom.

    Field: RotOpen
    Field is Imported: Yes
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The initial gap opening for a rotational degree of freedom.
    Table: Link Property Definitions 06 - Hook

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Page 952 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This may be either U1, U2, U3, R1, R2 or R3 indicating the link property degree of
    freedom considered.

    Field: Fixed
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is fixed (restrained). It is no if the link property
    DOF is not fixed, that is, it is free to move.

    Field: NonLinear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is nonlinear. It is no if the link property DOF is
    not nonlinear, that is, it is linear.

    Field: TransKE
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective stiffness of the link for a translational degree of freedom. This stiffness is
    used for all linear load cases including modal load cases.

    Field: RotKE
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The effective stiffness of the link for a rotational degree of freedom. This stiffness is used
    for all linear load cases including modal load cases.

    Field: TransCE
    Field is Imported: Yes
    Format: Eff Damping - Trans (Damping Items section of form)
    Units: Force-s/Length
    The effective damping of the link for a translational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Page 953 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RotCE
    Field is Imported: Yes
    Format: Eff Damping - Rot (Damping Items section of form)
    Units: Force-Length-s/rad
    The effective damping of the link for a rotational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: DJ
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the J-End of the link to the shear spring. This item only applies to the
    U2 and U3 (shear) degrees of freedom.

    Field: TransK
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The initial stiffness of a translational degree of freedom of the link. This item is used for
    nonlinear load cases only.

    Field: RotK
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The initial stiffness of a rotational degree of freedom of the link. This item is used for
    nonlinear load cases only.

    Field: TransOpen
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The initial hook opening for a translational degree of freedom.

    Field: RotOpen
    Field is Imported: Yes
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The initial hook opening for a rotational degree of freedom.
    Table: Link Property Definitions 07 - Rubber Isolator

    Page 954 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This may be either U1, U2, U3, R1, R2 or R3 indicating the link property degree of
    freedom considered.

    Field: Fixed
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is fixed (restrained). It is no if the link property
    DOF is not fixed, that is, it is free to move.

    Field: NonLinear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is nonlinear. It is no if the link property DOF is
    not nonlinear, that is, it is linear.

    Field: TransKE
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective stiffness of the link for a translational degree of freedom. This stiffness is
    used for all linear load cases including modal load cases.

    Field: RotKE
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The effective stiffness of the link for a rotational degree of freedom. This stiffness is used
    for all linear load cases including modal load cases.

    Page 955 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TransCE
    Field is Imported: Yes
    Format: Eff Damping - Trans (Damping Items section of form)
    Units: Force-s/Length
    The effective damping of the link for a translational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: RotCE
    Field is Imported: Yes
    Format: Eff Damping - Rot (Damping Items section of form)
    Units: Force-Length-s/rad
    The effective damping of the link for a rotational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: DJ
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the J-End of the link to the shear spring. This item only applies to the
    U2 and U3 (shear) degrees of freedom.

    Field: TransK
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The initial stiffness of a translational degree of freedom of the link. This item is used for
    nonlinear load cases only.

    Field: TransYield
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The yield force for the link. This item applies to translational degrees of freedom.

    Field: Ratio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the post-yield stiffness divided by the initial stiffness.
    Table: Link Property Definitions 08 - Sliding Isolator

    Page 956 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This may be either U1, U2, U3, R1, R2 or R3 indicating the link property degree of
    freedom considered.

    Field: Fixed
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is fixed (restrained). It is no if the link property
    DOF is not fixed, that is, it is free to move.

    Field: NonLinear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is nonlinear. It is no if the link property DOF is
    not nonlinear, that is, it is linear.

    Field: TransKE
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective stiffness of the link for a translational degree of freedom. This stiffness is
    used for all linear load cases including modal load cases.

    Field: RotKE
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The effective stiffness of the link for a rotational degree of freedom. This stiffness is used
    for all linear load cases including modal load cases.

    Page 957 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TransCE
    Field is Imported: Yes
    Format: Eff Damping - Trans (Damping Items section of form)
    Units: Force-s/Length
    The effective damping of the link for a translational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: RotCE
    Field is Imported: Yes
    Format: Eff Damping - Rot (Damping Items section of form)
    Units: Force-Length-s/rad
    The effective damping of the link for a rotational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: DJ
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the J-End of the link to the shear spring. This item only applies to the
    U2 and U3 (shear) degrees of freedom.

    Field: TransK
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The initial stiffness of a translational degree of freedom of the link. This item is used for
    nonlinear load cases only.

    Field: TransC
    Field is Imported: Yes
    Format: NL Damping - Trans (Damping Items section of form)
    Units: Force*(s/Length)^Cexp
    The nonlinear damping coefficient used the axial translational degree of freedom. Note
    that the damping exponent (CExp) associated with this item is always equal to 1. This
    item is used for nonlinear load cases only.

    Field: Slow
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The friction coefficient at zero velocity.
    Page 958 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fast
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The friction coefficient at fast velocity.

    Field: Rate
    Field is Imported: Yes
    Format: Slider Rate (Miscellaneous section of form)
    Units: sec/Length
    The inverse of the characteristic sliding velocity.

    Field: Radius
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Radius of the sliding contact surface. Note that 0 means there is an infinite radius, that is,
    the slider is flat.
    Table: Link Property Definitions 09 - TC Sliding Isolator

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This may be either U1, U2, U3, R1, R2 or R3 indicating the link property degree of
    freedom considered.

    Field: Fixed
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is fixed (restrained). It is no if the link property
    DOF is not fixed, that is, it is free to move.

    Page 959 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NonLinear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is nonlinear. It is no if the link property DOF is
    not nonlinear, that is, it is linear.

    Field: TransKE
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective stiffness of the link for a translational degree of freedom. This stiffness is
    used for all linear load cases including modal load cases.

    Field: RotKE
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The effective stiffness of the link for a rotational degree of freedom. This stiffness is used
    for all linear load cases including modal load cases.

    Field: TransCE
    Field is Imported: Yes
    Format: Eff Damping - Trans (Damping Items section of form)
    Units: Force-s/Length
    The effective damping of the link for a translational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: RotCE
    Field is Imported: Yes
    Format: Eff Damping - Rot (Damping Items section of form)
    Units: Force-Length-s/rad
    The effective damping of the link for a rotational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: DJ
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the J-End of the link to the shear spring. This item only applies to the
    U2 and U3 (shear) degrees of freedom.
    Page 960 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TransK
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The initial stiffness of a translational degree of freedom of the link. For the axial degree
    of freedom this item specifies the compression stiffness. This item is used for nonlinear
    load cases only.

    Field: TransKTens
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The initial stiffness of the translational axial degree of freedom of the link for tension.
    This item is used for nonlinear load cases only.

    Field: GapComp
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The initial gap opening, if any, for axial compression. This item is used for nonlinear load
    cases only.

    Field: GapTens
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The initial gap opening, if any, for axial tension. This item is used for nonlinear load cases
    only.

    Field: TransC
    Field is Imported: Yes
    Format: NL Damping - Trans (Damping Items section of form)
    Units: Force*(s/Length)^Cexp
    The nonlinear damping coefficient used for the axial translational degree of freedom.
    Note that the damping exponent (CExp) associated with this item is always equal to 1.
    This item is used for nonlinear load cases only.

    Field: SlowComp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The friction coefficient at zero velocity for axial compression.

    Page 961 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SlowTens
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The friction coefficient at zero velocity for axial tension.

    Field: FastComp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The friction coefficient at fast velocity for axial compression.

    Field: FastTens
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The friction coefficient at fast velocity for axial tension.

    Field: RateComp
    Field is Imported: Yes
    Format: Slider Rate (Miscellaneous section of form)
    Units: sec/Length
    The inverse of the characteristic sliding velocity for axial compression.

    Field: RateTens
    Field is Imported: Yes
    Format: Slider Rate (Miscellaneous section of form)
    Units: sec/Length
    The inverse of the characteristic sliding velocity for axial tension.

    Field: Radius
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Radius of the sliding contact surface. Note that 0 means there is an infinite radius, that is,
    the slider is flat.
    Table: Link Property Definitions 10 - Plastic (Wen)

    Page 962 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This may be either U1, U2, U3, R1, R2 or R3 indicating the link property degree of
    freedom considered.

    Field: Fixed
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is fixed (restrained). It is no if the link property
    DOF is not fixed, that is, it is free to move.

    Field: NonLinear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is nonlinear. It is no if the link property DOF is
    not nonlinear, that is, it is linear.

    Field: TransKE
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective stiffness of the link for a translational degree of freedom. This stiffness is
    used for all linear load cases including modal load cases.

    Field: RotKE
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The effective stiffness of the link for a rotational degree of freedom. This stiffness is used
    for all linear load cases including modal load cases.

    Page 963 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TransCE
    Field is Imported: Yes
    Format: Eff Damping - Trans (Damping Items section of form)
    Units: Force-s/Length
    The effective damping of the link for a translational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: RotCE
    Field is Imported: Yes
    Format: Eff Damping - Rot (Damping Items section of form)
    Units: Force-Length-s/rad
    The effective damping of the link for a rotational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: DJ
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the J-End of the link to the shear spring. This item only applies to the
    U2 and U3 (shear) degrees of freedom.

    Field: TransK
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The initial stiffness of a translational degree of freedom of the link. This item is used for
    nonlinear load cases only.

    Field: RotK
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The initial stiffness of a rotational degree of freedom of the link. This item is used for
    nonlinear load cases only.

    Field: TransYield
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The yield force for the link. This item applies to translational degrees of freedom.

    Page 964 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RotYield
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The yield moment for the link. This item applies to rotational degrees of freedom.

    Field: Ratio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the post-yield stiffness divided by the initial stiffness.

    Field: YieldExp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The yielding exponent that controls the sharpness of the transition from the initial stiffness
    to the yielded stiffness.
    Table: Link Property Definitions 11 - Multilinear Plastic

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This may be either U1, U2, U3, R1, R2 or R3 indicating the link property degree of
    freedom considered.

    Field: Fixed
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link degree of freedom is fixed; otherwise it is No.

    Page 965 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NonLinear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property is nonlinear. It is no if the link property is not
    nonlinear, that is, it is linear.

    Field: TransKE
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective stiffness of the link for a translational degree of freedom. This stiffness is
    used for all linear load cases including modal load cases.

    Field: RotKE
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The effective stiffness of the link for a rotational degree of freedom. This stiffness is used
    for all linear load cases including modal load cases.

    Field: TransCE
    Field is Imported: Yes
    Format: Eff Damping - Trans (Damping Items section of form)
    Units: Force-s/Length
    The effective damping of the link for a translational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: RotCE
    Field is Imported: Yes
    Format: Eff Damping - Rot (Damping Items section of form)
    Units: Force-Length-s/rad
    The effective damping of the link for a rotational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: DJ
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the J-End of the link to the shear spring. This item only applies to the
    U2 and U3 (shear) degrees of freedom.
    Page 966 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HysType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is eitherKinematic, Takeda, Product of Inertia about 2-3 Pivot indicating the
    hysteresis type for the multilinear plastic link.

    Field: PivotAlpha1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The unloading parameter, Alpha1, for the Pivot hysteresis type.

    Field: PivotAlpha2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The unloading parameter, Alpha2, for the Pivot hysteresis type.

    Field: PivotBeta1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The pinching point parameter, Beta1, for the Pivot hysteresis type.

    Field: PivotBeta2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The pinching point parameter, Beta2, for the Pivot hysteresis type.

    Field: PivotEta
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The initial stiffness loss parameter, Eta, for the Pivot hysteresis type.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Designation of a point on the force-deformation curve.
    Page 967 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Force
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The force at the specified point on the force-deformation curve. This item only applies to
    translational degrees of freedom (U1, U2 and U3).

    Field: Displ
    Field is Imported: Yes
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The displacement at the specified point on the force-deformation curve. This item only
    applies to translational degrees of freedom (U1, U2 and U3).

    Field: Moment
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    The moment at the specified point on the force-deformation curve. This item only applies
    to rotational degrees of freedom (R1, R2 and R3).

    Field: Rotation
    Field is Imported: Yes
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotation at the specified point on the force-deformation curve. This item only applies
    to rotational degrees of freedom (R1, R2 and R3).
    Table: Link Property Definitions 12 - Triple Pendulum Isolator

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: DOF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This may be either U1, U2, U3, R1, R2 or R3 indicating the link property degree of
    freedom considered.

    Page 968 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fixed
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is fixed (restrained). It is no if the link property
    DOF is not fixed, that is, it is free to move.

    Field: NonLinear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property DOF is nonlinear. It is no if the link property DOF is
    not nonlinear, that is, it is linear.

    Field: TransKE
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective stiffness of the link for a translational degree of freedom. This stiffness is
    used for all linear load cases including modal load cases.

    Field: RotKE
    Field is Imported: Yes
    Format: Rotational Stiffness (Stiffness section of form)
    Units: Force-Length/rad
    The effective stiffness of the link for a rotational degree of freedom. This stiffness is used
    for all linear load cases including modal load cases.

    Field: TransCE
    Field is Imported: Yes
    Format: Eff Damping - Trans (Damping Items section of form)
    Units: Force-s/Length
    The effective damping of the link for a translational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.

    Field: RotCE
    Field is Imported: Yes
    Format: Eff Damping - Rot (Damping Items section of form)
    Units: Force-Length-s/rad
    The effective damping of the link for a rotational degree of freedom. This damping is
    used for all linear load cases including modal analysis cases. The specified effective
    damping is converted to modal damping for these linear load cases.
    Page 969 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DJ
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the J-End of the link to the shear spring. This item only applies to the
    U2 and U3 (shear) degrees of freedom.

    Field: TransK
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The initial stiffness of a translational degree of freedom of the link. This item is used for
    nonlinear load cases only.

    Field: TransC
    Field is Imported: Yes
    Format: Eff Damping - Rot (Damping Items section of form)
    Units: Force-Length-s/rad
    The nonlinear damping coefficient used the axial translational degree of freedom. Note
    that the damping exponent (CExp) associated with this item is always equal to 1. This
    item is used for nonlinear load cases only.

    Field: HeightOut
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height between the outer sliding surfaces.

    Field: HeightIn
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height between the inner sliding surfaces.

    Field: SymOut
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Whether or not the outer sliding surfaces (bottom and top) are symmetric to each other.

    Page 970 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: KOutTop
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The initial nonlinear stiffness (before sliding) for the outer top sliding surface. This applies
    to U2 and U3 if they are nonlinear.

    Field: KOutBot
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The initial nonlinear stiffness (before sliding) for the outer bottom sliding surface. This
    applies to U2 and U3 if they are nonlinear.

    Field: KInTop
    Field is Imported: Yes
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The initial nonlinear stiffness (before sliding) for the inner top sliding surface. This applies
    to U2 and U3 if they are nonlinear.

    Field: SlowOutTop
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The friction coefficient at zero velocity for the outer top sliding surface. This applies to U2
    and U3 if they are nonlinear.

    Field: SlowOutBot
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The friction coefficient at zero velocity for the outer bottom sliding surface. This applies
    to U2 and U3 if they are nonlinear.

    Field: SlowInTop
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The friction coefficient at zero velocity for the inner top sliding surface. This applies to U2
    and U3 if they are nonlinear.

    Page 971 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FastOutTop
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The friction coefficient at fast velocity for the outer top sliding surface. This applies to U2
    and U3 if they are nonlinear.

    Field: FastOutBot
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The friction coefficient at fast velocity for the outer bottom sliding surface. This applies to
    U2 and U3 if they are nonlinear.

    Field: FastInTop
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The friction coefficient at fast velocity for the inner top sliding surface. This applies to U2
    and U3 if they are nonlinear.

    Field: RateOutTop
    Field is Imported: Yes
    Format: Slider Rate (Miscellaneous section of form)
    Units: sec/Length
    The inverse of the characteristic sliding velocity for the outer top sliding surface. This
    applies to U2 and U3 if they are nonlinear.

    Field: RateOutBot
    Field is Imported: Yes
    Format: Slider Rate (Miscellaneous section of form)
    Units: sec/Length
    The inverse of the characteristic sliding velocity for the outer bottom sliding surface. This
    applies to U2 and U3 if they are nonlinear.

    Field: RateInTop
    Field is Imported: Yes
    Format: Slider Rate (Miscellaneous section of form)
    Units: sec/Length
    The inverse of the characteristic sliding velocity for the inner top sliding surface. This
    applies to U2 and U3 if they are nonlinear.

    Page 972 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RadOutTop
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Radius of the outer top sliding contact surface. Note that 0 means that the radius is infinite
    (the slider is flat). This applies to U2 and U3 if they are nonlinear.

    Field: RadOutBot
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Radius of the outer bottom sliding contact surface. Note that 0 means that the radius is
    infinite (the slider is flat). This applies to U2 and U3 if they are nonlinear.

    Field: RadInTop
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Radius of the inner top sliding contact surface. Note that 0 means that the radius is infinite
    (the slider is flat). This applies to U2 and U3 if they are nonlinear.

    Field: StopOutTop
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Stop distance for the outer top sliding surface. This is the amount of displacement allowed
    before hitting a stiff limit. Note that 0 means there is no stop. This applies to U2 and U3 if
    they are nonlinear.

    Field: StopOutBot
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Stop distance for the inner bottom sliding surface. This is the amount of displacement
    allowed before hitting a stiff limit. Note that 0 means there is no stop. This applies to U2
    and U3 if they are nonlinear.

    Page 973 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StopInTop
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Stop distance for the outer top sliding surface. This is the amount of displacement allowed
    before hitting a stiff limit. Note that 0 means there is no stop. This applies to U2 and U3 if
    they are nonlinear.
    Table: Link Property Definitions - Bridge Object Flags

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a link property.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the link property is an automatically created from a bridge object.
    Otherwise it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this link property is associated.
    Table: Link Vehicle Response Component Overwrites

    Field: Link
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the link object.

    Field: Usage
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either AASHTO HL - Superstructure, AASHTO HL - Reaction, or AASHTO H &
    HS Superstructure indicating the vehicle type and structural member type to which the
    overwrite applies.

    Page 974 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    AASHTO HL - Superstructure refers to the superstructure negative moments over


    supports and applies to AASHTO H, HS and HL loading.
    AASHTO HL - Reaction refers to reactions at interior supports (piers) and applies only to
    AASHTO HL loaoding.
    AASHTO H & HS Superstructure refers to superstructure moments (positive or negative)
    and applies to AASHTO H and HS loading.

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either F1, F2, F3, M1, M2, M3 or indicating the output component to which the
    overwrite applies.

    Field: Status
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Do Not Use, Use Positive Values, Use Negative Values, or Use All Values
    indicating the portion of the output for the specified component to which the overwrite
    applies.
    Table: Load Case Definitions

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the load case.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The type of load case. This may be any one of the following:LinStatic, NonStatic,
    LinModal, LinRespSpec, LinModHist, NonModHist, LinDirHist, NonDirHist, LinDirHist,
    LinMoving, LinBuckling, LinSteady, LinPower, LinMSStat, Hyperstatic.

    Page 975 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: InitialCond
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Zero or the name of a Nonlinear Static case. Zero means that the stiffness
    used is based on the unstressed state. Otherwise, the stiffness used is that at the end of the
    specified Nonlinear Static case. This item does not apply to response spectrum and linear
    modal history load cases.

    Field: ModalCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the modal load case used in solving this load case. This item only applies to
    nonlinear static, response spectrum, and modal history cases.

    Field: BaseCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies to hyperstatic load cases. It is the name of the base load case
    whose reactions are applied to the unsupported structure to create the hyperstatic load
    case.

    Field: DesTypeOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Prog Det or User indicating the design type option for the load case. Prog
    Det is short for program determined.

    Field: DesignType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is eitherDEAD, SUPER DEAD, LIVE, REDUCIBLE LIVE, QUAKE, WIND,
    SNOW, OTHER, VEHICLE LIVE, TEMPERATURE, ROOF LIVE, NOTIONAL,
    PATTERN LIVE, WAVE, BRAKING, CENTRIFUGAL, FRICTION, ICE, WIND - LIVE
    LOAD, HOR EARTH PR, VER EARTH PR, EARTH SURCHR, DOWNDRAG,
    VEHICLE COLLISION, VESSEL COLLISION, TEMP GRAD, SETTLEMENT,
    SHRINKAGE, CREEP, WATER PR, LL SURCHR, LOCKED IN, PEDESTRIAN LL,
    PRESTRESS, HYPERSTATIC, BOUYANCY, STREAM FLOW, IMPACT,
    CONSTRUCTION, WEARING SURFACE, WATER DL, DEAD MANUFACTURE,
    HYDROSTATIC, PASSIVE EARTH PR, ACTIVE EARTH PR, PEDESTRIAN LL
    Page 976 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    REDUCED, SNOW HIGHALTITUDE, EURO LOADMODEL1 CHARACTER, EURO


    LOADMODEL1 FREQUENT, EURO LOADMODEL2, EURO LOADMODEL3, EURO
    LOADMODEL4, SEASTATE, PERMIT VEH LIVE, VEHICLE FATIGUE, PERMIT
    VEH FATIGUE. It is used for determining load case multipliers when the program
    creates default design load combinations.
    This item is only imported when the DesTypeOpt is User.

    Field: DesActOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Prog Det or User indicating the design action option for the load case. Prog
    Det is short for program determined.

    Field: DesignAct
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    It is used for load cases to classify the how the loads act on a bridge structure. This item is
    only imported when the DesActOpt is User.

    Field: AutoType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either None or Bridge Scheduler indicating the auto type for the load case. In
    general, the user should not change this item, and should use None for new load cases.

    Field: RunCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the load case is specified to be run. Otherwise it is No.

    Field: CaseStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This item is either Finished, Not Run, Could Not Start or Not Finished indicating the load
    case status.

    Page 977 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified load case.

    Field: Notes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    User notes for the specified load case.
    Table: Load Pattern Definitions

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the load pattern.

    Field: DesignType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is eitherDEAD, SUPER DEAD, LIVE, REDUCIBLE LIVE, QUAKE, WIND,
    SNOW, OTHER, VEHICLE LIVE, TEMPERATURE, ROOF LIVE, NOTIONAL,
    PATTERN LIVE, WAVE, BRAKING, CENTRIFUGAL, FRICTION, ICE, WIND - LIVE
    LOAD, HOR EARTH PR, VER EARTH PR, EARTH SURCHR, DOWNDRAG,
    VEHICLE COLLISION, VESSEL COLLISION, TEMP GRAD, SETTLEMENT,
    SHRINKAGE, CREEP, WATER PR, LL SURCHR, LOCKED IN, PEDESTRIAN LL,
    PRESTRESS, HYPERSTATIC, BOUYANCY, STREAM FLOW, IMPACT,
    CONSTRUCTION, WEARING SURFACE, WATER DL, DEAD MANUFACTURE,
    HYDROSTATIC, PASSIVE EARTH PR, ACTIVE EARTH PR, PEDESTRIAN LL
    REDUCED, SNOW HIGHALTITUDE, EURO LOADMODEL1 CHARACTER, EURO
    LOADMODEL1 FREQUENT, EURO LOADMODEL2, EURO LOADMODEL3, EURO
    LOADMODEL4, SEASTATE, PERMIT VEH LIVE, VEHICLE FATIGUE, PERMIT
    VEH FATIGUE. It is used for determining load case multipliers when the program
    creates default design load combinations.

    Field: SelfWtMult
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The self weight multiplier for the load pattern.

    Page 978 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AutoLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    If the Type item is Quake or Wind then this is either None, User or the name of the design
    code used to create the auto load.

    Field: NotBasePat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The notional load base load pattern. This item only applies when the DesignType item is
    NOTIONAL.

    Field: NotRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The notional load load ratio. This item only applies when the DesignType item is
    NOTIONAL.

    Field: NotDir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Global X or Global Y indicating the notional load pattern direction. This
    item only applies when the DesignType item is NOTIONAL.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified load pattern.

    Field: Notes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    User notes for the specified load pattern.
    Table: Masses 1 - Mass Source

    Page 979 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MassFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Elements, Loads or All. Elements means that the mass is calculated
    from the self mass of elements plus any additional masses specified on joint, frame or area
    elements. Loads means that the mass is calculated from a user-specified collection of one
    or more load patterns. All means that the mass is calculated from both Elements and
    Loads.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A load pattern used to define the mass.

    Field: Multiplier
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for the load pattern specified in the LoadPat item.
    Table: Mass Source

    Field: MassSource
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the mass source.

    Field: Elements
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if element self mass is included in the mass. Otherwise it is No.

    Field: Masses
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if assigned masses are included in the mass. Otherwise it is No.

    Page 980 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Loads
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if specified load patterns are included in the mass. Otherwise it is No.

    Field: IsDefault
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the considered mass source is the default mass source. Otherwise it is
    No. Note that only one mass source can be the default.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A load pattern used to define the mass.

    Field: Multiplier
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Multiplier for the load pattern specified in the LoadPat item.
    Table: Material List 1 - By Object Type

    Field: ObjectType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Frame, Area, Solid or Link indicating the object type.

    Field: Material
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the material associated with the object type. For links this item is N.A.
    which is short for Not Applicable.

    Page 981 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalWeight
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The total combined weight of all of the objects in the model (or all selected objects in the
    model if there is a selection) whose object type is that specified by the ObjectType item
    and whose material is that specified by the Material item.

    Field: NumPieces
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    This item only applies to frame and link objects. For frames it is the total number of
    frame objects in the model (or all selected frame objects in the model if there is a
    selection) whose material is that specified by the Material item. For links it is the total
    number of links in the model (or all selected link objects in the model if there is a
    selection).
    Table: Material List 2 - By Section Property

    Field: Section
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is the name of either a frame section property, an area section property, a solid section
    property or a link property.

    Field: ObjectType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Frame, Area, Solid or Link indicating the object type of the specified section.

    Field: NumPieces
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    This item only applies to frame and link objects. It is the total number of frame or link
    objects in the model (or the total number of selected frame or link objects in the model if
    there is a selection) whose section property is that specified by the Section item.

    Page 982 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalLength
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    This item only applies to frame objects. It is the total combined weight of all frame
    objects in the model (or the total combined weight of all selected frame objects in the
    model if there is a selection)whose section property is that specified by the Section item.

    Field: TotalWeight
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    The total combined weight of all of the objects in the model (or all the selected objects in
    the model if there is a selection) whose section property is that specified by the Section
    item.
    Table: Material Properties 01 - General

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is eitherSteel, Concrete, Other, Aluminum, ColdFormed, Rebar or Tendon indicating
    the type of the material.

    Field: SymType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either isotropic, orthotropic, anisotropic or uniaxial indicating the symmetry type
    for the material. In the majority of models isotropic properties are used. Rebar is
    typically modelled using a uniaxial material property.

    Field: TempDepend
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the material properties are temperature dependent. Otherwise it is No.
    Page 983 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Color
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color associated with the
    material.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified material property.

    Field: Notes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    User notes for the specified material property.
    Table: Material Properties 01T - Material Temperatures

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    A temperature at which material properties are specified. This item is only applicable if
    the material is specified to be temperature dependent.
    Table: Material Properties 02 - Basic Mechanical Properties

    Page 984 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The temperature at which the associated material properties apply. This item is only
    applicable if the material is specified to be temperature dependent.

    Field: UnitWeight
    Field is Imported: Yes
    Format: Weight/Volume (Mass and Weight section of form)
    Units: Force/Length3
    The weight per unit volume of the material.

    Field: UnitMass
    Field is Imported: Yes
    Format: Mass/Volume (Mass and Weight section of form)
    Units: Force-Sec2/Length4
    The mass per unit volume of the material.

    Field: E1
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity in the Material 1 direction. This item is imported for isotropic,
    orthotropic, anisotropic and uniaxial materials.

    Field: E2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity in the Material 2 direction. This item is imported for orthotropic and
    anisotropic materials.

    Page 985 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: E3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity in the Material 3 direction. This item is imported for orthotropic and
    anisotropic materials.

    Field: G12
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear modulus in the Material 1-2 plane. This item is imported for orthotropic and
    anisotropic materials. For isotropic materials the value of G is calculated using the
    standard formula from E and U.

    Field: G13
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear modulus in the Material 1-3 plane. This item is imported for orthotropic and
    anisotropic materials. For isotropic materials the value of G is calculated using the
    standard formula from E and U.

    Field: G23
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear modulus in the Material 2-3 plane. This item is imported for orthotropic and
    anisotropic materials. For isotropic materials the value of G is calculated using the
    standard formula from E and U.

    Field: U12
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Poisson's ratio. This item is imported for isotropic, orthotropic and anisotropic materials.

    Field: U13
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Poisson's ratio. This item is imported for orthotropic and anisotropic materials.

    Page 986 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U23
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Poisson's ratio. This item is imported for orthotropic and anisotropic materials.

    Field: U14
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear and coupling poisson's ratio. This item is imported for anisotropic materials.

    Field: U24
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear and coupling poisson's ratio. This item is imported for anisotropic materials.

    Field: U34
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear and coupling poisson's ratio. This item is imported for anisotropic materials.

    Field: U15
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear and coupling poisson's ratio. This item is imported for anisotropic materials.

    Field: U25
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear and coupling poisson's ratio. This item is imported for anisotropic materials.

    Field: U35
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear and coupling poisson's ratio. This item is imported for anisotropic materials.

    Page 987 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U45
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear and coupling poisson's ratio. This item is imported for anisotropic materials.

    Field: U16
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear and coupling poisson's ratio. This item is imported for anisotropic materials.

    Field: U26
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear and coupling poisson's ratio. This item is imported for anisotropic materials.

    Field: U36
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear and coupling poisson's ratio. This item is imported for anisotropic materials.

    Field: U46
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear and coupling poisson's ratio. This item is imported for anisotropic materials.

    Field: U56
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear and coupling poisson's ratio. This item is imported for anisotropic materials.

    Field: A1
    Field is Imported: Yes
    Format: Thermal Coefficient (Miscellaneous section of form)
    Units: 1/Temp
    Coefficient of thermal expansion in the Material 1 direction. This item is imported for
    isotropic, orthotropic, anisotropic and uniaxial materials.
    Page 988 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: A2
    Field is Imported: Yes
    Format: Thermal Coefficient (Miscellaneous section of form)
    Units: 1/Temp
    Coefficient of thermal expansion in the Material 2 direction. This item is imported for
    orthotropic and anisotropic materials.

    Field: A3
    Field is Imported: Yes
    Format: Thermal Coefficient (Miscellaneous section of form)
    Units: 1/Temp
    Coefficient of thermal expansion in the Material 3 direction. This item is imported for
    orthotropic and anisotropic materials.

    Field: A12
    Field is Imported: Yes
    Format: Thermal Coefficient (Miscellaneous section of form)
    Units: 1/Temp
    Coefficient of thermal expansion in the Material 1-2 plane. This item is imported for
    anisotropic materials.

    Field: A13
    Field is Imported: Yes
    Format: Thermal Coefficient (Miscellaneous section of form)
    Units: 1/Temp
    Coefficient of thermal expansion in the Material 1-3 plane. This item is imported for
    anisotropic materials.

    Field: A23
    Field is Imported: Yes
    Format: Thermal Coefficient (Miscellaneous section of form)
    Units: 1/Temp
    Coefficient of thermal expansion in the Material 2-3 plane. This item is imported for
    anisotropic materials.
    Table: Material Properties 03a - Steel Data

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Page 989 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The temperature at which the associated material properties apply. This item is only
    applicable if the material is specified to be temperature dependent.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Yield stress of the steel.

    Field: Fu
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile strength of the steel.

    Field: EffFy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Effective yield stress of the steel.

    Field: EffFu
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Effective tensile strength of the steel.

    Field: SSCurveOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Defined or Simple indicating the selected option for defining the
    material stress strain curve. User Defined means that stress-strain points are defined by
    the user. If the Simple option is selected then the stress-strain curve is parametrically
    defined.

    Page 990 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SSHysType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Elastic, Kinematic or Takeda indicating the hysteresis type for the material
    stress strain curve.

    Field: SHard
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strain at the onset of strain hardening. This item only applies when a parametric
    stress-strain curve option is selected.

    Field: SMax
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strain at the maximum steel stress. This item only applies when a parametric stressstrain curve option is selected.

    Field: SRup
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strain at the steel rupture. This item only applies when a parametric stress-strain curve
    option is selected.

    Field: FinalSlope
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The final slope in the stress strain curve; this item is a multiplier on E. This item only
    applies when a parametric stress-strain curve option is selected.
    Table: Material Properties 03b - Concrete Data

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Page 991 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The temperature at which the associated material properties apply. This item is only
    applicable if the material is specified to be temperature dependent.

    Field: Fc
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The unconfined concrete compressive strength.

    Field: LtWtConc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the material specified is lightweight concrete. Otherwise it is No.

    Field: LtWtFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shear strength reduction factor for lightweight concrete.

    Field: SSCurveOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Defined, Simple or Mander indicating the selected option for defining
    the material stress strain curve(s). User Defined means that stress-strain points are defined
    by the user. If the Simple or Mander options are selected then the stress-strain curve is
    parametrically defined.

    Field: SSHysType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Elastic, Kinematic or Takeda indicating the hysteresis type for the material
    stress strain curve.

    Page 992 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SFc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strain at a stress of f'c, the unconfined concrete compressive strength. This item only
    applies when a parametric stress-strain curve option is selected.

    Field: SCap
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ultimate concrete strain (unconfined). This item only applies when a parametric
    stress-strain curve option is selected.

    Field: FinalSlope
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The final slope in the stress strain curve; this item is a multiplier on E. This item only
    applies when a parametric stress-strain curve option is selected.

    Field: FAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The friction angle, a Drucker-Prager parameter.

    Field: DAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The dilatational angle, a Drucker-Prager parameter.

    Field: TimeType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either CEB-FIP 90 or ACI 209R-92 indicating the standard used for time dependent
    analysis.

    Page 993 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TimeE
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if time dependence is considered for compressive strength and stiffness.
    Otherwise it is No.

    Field: TimeCreep
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if time dependence is considered for creep. Otherwise it is No.

    Field: TimeShrink
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if time dependence is considered for shrinkage. Otherwise it is No.

    Field: CreepType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Full Integration or Dirichlet Series indicating the creep integration type.

    Field: CreepTerms
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item only applies when the CreepType item is Dirichlet Series. It is the number of
    terms used in the series.
    Table: Material Properties 03c - Aluminum Data

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Page 994 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The temperature at which the associated material properties apply. This item is only
    applicable if the material is specified to be temperature dependent.

    Field: AlumType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Wrought, Cast-Mold or Cast-Sand indicating the type of aluminum.

    Field: Alloy
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The Alloy designation for the aluminum, for example, 2014-T6 for wrought or 356.0-T7
    for cast (mold or sand) aluminum.

    Field: Fcy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Compressive yield strength of aluminum.

    Field: Fty
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile yield strength of aluminum.

    Field: Ftu
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile ultimate strength of aluminum.

    Page 995 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fsu
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear ultimate strength of aluminum.

    Field: SSHysType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Elastic, Kinematic or Takeda indicating the hysteresis type for the material
    stress strain curve.
    Table: Material Properties 03d - Cold Formed Data

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The temperature at which the associated material properties apply. This item is only
    applicable if the material is specified to be temperature dependent.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Yield stress of the cold formed steel.

    Field: Fu
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile strength of the cold formed steel.

    Page 996 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SSHysType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Elastic, Kinematic or Takeda indicating the hysteresis type for the material
    stress strain curve.
    Table: Material Properties 03e - Rebar Data

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The temperature at which the associated material properties apply. This item is only
    applicable if the material is specified to be temperature dependent.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Yield stress of the rebar.

    Field: Fu
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile strength of the rebar.

    Field: EffFy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Effective yield stress of the rebar.

    Page 997 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EffFu
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Effective tensile strength of the rebar.

    Field: SSCurveOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Defined, Simple or Park indicating the selected option for defining the
    material stress strain curve(s). User Defined means that stress-strain points are defined by
    the user. If the Simple or Park options are selected then the stress-strain curve is
    parametrically defined.

    Field: SSHysType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Elastic, Kinematic or Takeda indicating the hysteresis type for the material
    stress strain curve.

    Field: SHard
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strain at the onset of strain hardening. This item only applies when a parametric
    stress-strain curve option is selected.

    Field: SCap
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ultimate strain capacity. This item only applies when a parametric stress-strain curve
    option is selected.

    Field: FinalSlope
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The final slope in the stress strain curve; this item is a multiplier on E. This item only
    applies when a parametric stress-strain curve option is selected.

    Page 998 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UseCTDef
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if Caltrans default controlling strain values (bar size dependent) are to be
    used instead of the specified SHard and SCap items. Otherwise it is No. This item only
    applies when a parametric stress-strain curve option is selected.
    Table: Material Properties 03f - Tendon Data

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The temperature at which the associated material properties apply. This item is only
    applicable if the material is specified to be temperature dependent.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Yield stress of the tendon.

    Field: Fu
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile strength of the tendon.

    Field: SSCurveOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Defined, 250 ksi or 270 ksi indicating the selected option for defining
    the material stress strain curve(s). User Defined means that stress-strain points are defined
    by the user. If the 250 ksi or 270 ksi options are selected then the stress-strain curve is
    parametrically defined.

    Page 999 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SSHysType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Elastic, Kinematic or Takeda indicating the hysteresis type for the material
    stress strain curve.

    Field: FinalSlope
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The final slope in the stress strain curve; this item is a multiplier on E. This item only
    applies when a parametric stress-strain curve option is selected.

    Field: TimeType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either CEB-FIP 90 or ACI 209R-92 indicating the standard used for time dependent
    analysis.

    Field: TimeRelax
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if time dependence is considered for tendon steel relaxation. Otherwise it
    is No.

    Field: RelaxType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Full Integration or Dirichlet Series indicating the steel relaxation integration
    type.

    Field: RelaxTerms
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item only applies when the RelaxType item is Dirichlet Series. It is the number of
    terms used in the series.
    Table: Material Properties 03g - Other Data

    Page 1000 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The temperature at which the associated material properties apply. This item is only
    applicable if the material is specified to be temperature dependent.

    Field: SSHysType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Elastic, Kinematic or Takeda indicating the hysteresis type for the material
    stress strain curve.

    Field: FAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The friction angle, a Drucker-Prager parameter.

    Field: DAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The dilatational angle, a Drucker-Prager parameter.
    Table: Material Properties 04 - User Stress-Strain Curves

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Page 1001 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The temperature at which the associated material properties apply. This item is only
    applicable if the material is specified to be temperature dependent.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The point number of the specified point on the stress-strain curve.

    Field: Strain
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strain at the specified point.

    Field: Stress
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The stress at the specified point.

    Field: PointID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either blank, or it is one of -E, -D, -C, -B, A, B ,C ,D or E. These points control the
    color that will be displayed for the hinge in a deformed shape plot.
    Table: Material Properties 05a - Time Dependence - CEB-FIP 90

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Page 1002 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The temperature at which the associated material properties apply. This item is only
    applicable if the material is specified to be temperature dependent.

    Field: CementCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient s that is defined in Section 2.1.6.1 of CEB_FIP Model Code 1990. This
    coefficient depends on the type of cement. It is used in calculating the time dependence of
    strength and modulus of elasticity.
    This parameter applies to concrete materials.

    Field: RelHumid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Percent
    The relative humidity of the ambient environment in percent. This coefficient is used in
    calculating creep and shrinkage.
    This parameter applies to concrete materials.

    Field: NotionSize
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The notional size of the member.
    As defined in Equation 2.1-69 of CEB_FIP Model Code 1990 it is equal to two times the
    cross-sectional area of the member divided by the perimeter of the member in contact with
    the atmosphere. This coefficient is used in calculating creep and shrinkage.
    This parameter applies to concrete materials.

    Field: BetaSC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient Beta subscript sc defined in Equation 2.1-76 of CEB_FIP Model Code
    1990.This coefficient is used in calculating shrinkage.
    Page 1003 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    This parameter applies to concrete materials.

    Field: ShrinkStart
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The parameter t subscript s used in Section 2.1.6.4.4 of CEB_FIP Model Code 1990. It is
    the age of the concrete in days at the beginning of shrinkage or swelling. This parameter
    is used in calculating shrinkage.
    This parameter applies to concrete materials.

    Field: RelaxClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The relaxation class as defined in Section 2.3.4.5 of CEB_FIP Model Code 1990. The
    class is either 1 or 2. Class 1 is normal relaxation characteristics for wires and strands and
    Class 2 is improved relaxation characteristics for wires and strands.
    This parameter applies to tendon materials.
    Table: Material Properties 06 - Damping Parameters

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The temperature at which the associated material properties apply. This item is only
    applicable if the material is specified to be temperature dependent.

    Field: ModalRatio
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The modal damping ratio associated with additional material damping that is specified by
    modal damping ratio.

    Page 1004 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VisMass
    Field is Imported: Yes
    Format: Controlled by program
    Units: 1/Sec
    The mass coefficient associated with additional material damping that is specified by
    viscous proportional damping.

    Field: VisStiff
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The stiffness coefficient associated with additional material damping that is specified by
    viscous proportional damping.

    Field: HysMass
    Field is Imported: Yes
    Format: Controlled by program
    Units: 1/Sec2
    The mass coefficient associated with additional material damping that is specified by
    hysteretic proportional damping.

    Field: HysStiff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stiffness coefficient associated with additional material damping that is specified by
    hysteretic proportional damping.
    Table: Material Properties 07 - Thermal Properties

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a material property.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The temperature at which the associated material properties apply. This item is only
    applicable if the material is specified to be temperature dependent.

    Page 1005 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HeatCap
    Field is Imported: Yes
    Format: Energy/(Temp*Length3) (Power/(Temp4*Length2) section of form)
    Units: Force/Length2-Temp
    The heat capacity for the material.

    Field: CondK11
    Field is Imported: Yes
    Format: Power/(Temp*Length) (Heat Transfer section of form)
    Units: Force/Temp-s
    k11 term of the symmetric 3x3 thermal conductivity matrix for the material.

    Field: CondK12
    Field is Imported: Yes
    Format: Power/(Temp*Length) (Heat Transfer section of form)
    Units: Force/Temp-s
    k12 term of the symmetric 3x3 thermal conductivity matrix for the material.

    Field: CondK22
    Field is Imported: Yes
    Format: Power/(Temp*Length) (Heat Transfer section of form)
    Units: Force/Temp-s
    k22 term of the symmetric 3x3 thermal conductivity matrix for the material.

    Field: CondK13
    Field is Imported: Yes
    Format: Power/(Temp*Length) (Heat Transfer section of form)
    Units: Force/Temp-s
    k13 term of the symmetric 3x3 thermal conductivity matrix for the material.

    Field: CondK23
    Field is Imported: Yes
    Format: Power/(Temp*Length) (Heat Transfer section of form)
    Units: Force/Temp-s
    k23 term of the symmetric 3x3 thermal conductivity matrix for the material.

    Field: CondK33
    Field is Imported: Yes
    Format: Power/(Temp*Length) (Heat Transfer section of form)
    Units: Force/Temp-s
    k33 term of the symmetric 3x3 thermal conductivity matrix for the material.
    Table: Multi-Step Moving Load 1 - General
    Page 1006 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the load pattern in which this multi-step bridge live load (moving load) is
    defined.

    Field: LoadDur
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Duration of loading in seconds.

    Field: LoadDisc
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    Discretization of loading in seconds.
    Table: Multi-Step Moving Load 2 - Vehicle Data

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the load pattern in which this multi-step bridge live load (moving load) is
    defined.

    Field: Vehicle
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the vehicle used in this load pattern.

    Field: Lane
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the lane in which the specified vehicle is applied.

    Page 1007 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station along the specified lane where the front of the vehicle is initially placed.

    Field: StartTime
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The time at which the vehicle is initially placed on the lane.

    Field: Direction
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Forward or Backward indicating the direction the vehicle runs along the
    lane.

    Field: Speed
    Field is Imported: Yes
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    The speed (constant) at which the vehicle moves along the lane.
    Table: Named Sets - Database Tables 1 - General

    Field: DBNamedSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a database tables named set.

    Field: SortOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'Elem, Cases' or 'Cases, Elem' indicating the output sort order.

    Page 1008 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Unformatted
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This is Yes if the data is to be output unformatted; otherwise it is No.

    Field: ModeStart
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The starting mode for modal output.

    Field: ModeEnd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The ending mode for modal output. If all modes are to be output then this item is All.

    Field: ModalHist
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Envelopes or StepByStep indicating the type of output specified for
    modal history load cases.

    Field: DirectHist
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Envelopes or StepByStep indicating the type of output specified for
    direct history load cases.

    Field: NLStatic
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Last Step or StepByStep indicating the type of output specified for
    nonlinear static load cases.

    Page 1009 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BaseReacX
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Global X coordinate of the point where the base reactions are reported.

    Field: BaseReacY
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Global Y coordinate of the point where the base reactions are reported.

    Field: BaseReacZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The Global Z coordinate of the point where the base reactions are reported.

    Field: Combo
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Envelopes or MultiValued indicating the type of output specified for
    combinations.

    Field: Steady
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Envelopes or Frequencies indicating the type of output specified for
    steady state load cases.

    Field: SteadyOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Phases, Magnitude or All indicating the type of output specified for
    steady state load cases. Phases means both in-phase and out-of-phase results. All means
    in-phase, out-of-phase and magnitude results.

    Page 1010 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PSD
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either RMS or At PSD indicating the type of output specified for power
    spectral density load cases.

    Field: Multistep
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Envelopes or StepByStep indicating the type of output specified for
    multi-step static load cases.

    Field: NumTables
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of selected tables.

    Field: NumLoads
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of selected load patterns.

    Field: NumCases
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of selected load cases.

    Field: NumGenDispl
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of selected generalized displacements.

    Page 1011 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumSectCuts
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of selected section cuts.

    Field: NumVWSets
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of selected virtual work named sets.

    Field: NumNLSSets
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of selected nonlinear static curves named sets.

    Field: NumRSSets
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of selected joint time history response spectra named sets.

    Field: NumPFSets
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of selected plot function traces named sets.
    Table: Named Sets - Database Tables 2 - Selections

    Field: DBNamedSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a database tables named set.

    Page 1012 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SelectType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The type of selection. This is either Table, LoadPattern, LoadCase, Combo, GenDispl
    (short for generalized displacement), SectionCut, VWNamedSet (VW is short for virtual
    work), RSNamedSet (RS is short for joint time history response spectra), or PFNamedSet
    (PF is short for plot function trace).

    Field: Selection
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Depending on the value of the SelectType item, this item is one of the following:
    Table: Name of the database table.
    LoadPattern: Name of the selected load pattern.
    LoadCase: Name of the selected load case.
    GenDispl: Name of the selected generalized displacement.
    SectionCut: Name of the selected section cut.
    VWNamedSet: Name of the selected virtual work named set.
    RSNamedSet: Name of the selected joint time history response spectra named set.
    PFNamedSet: Name of the selected plot function traces named set.
    Table: Named Sets - Virtual Work

    Field: VWNamedSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a virtual work named set.

    Field: ForceCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load case used for forces when computing the virtual work.

    Field: DisplCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load case used for displacements when computing the virtual work.

    Page 1013 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ShowValues
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the virtual work is to be shown as values when displayed on screen. It
    is no if it is to be shown as different colors (with a legend) when displayed on screen.

    Field: ValueType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Relative or Absolute indicating the type of value displayed.
    Table: Named Sets - Plot Function Traces 1 - General

    Field: PFNamedSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a plot function trace named set.

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load case for which the plot function trace is generated.

    Field: HorizFunc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Time, Frequency, Step, or the name of a plot function indicating the item
    used for the horizontal axis of the plot function trace.

    Field: NumVertFunc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of vertical plot functions contained in this named set.

    Page 1014 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TimeFrom
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The starting time (or step) for the plot function trace.

    Field: TimeTo
    Field is Imported: Yes
    Format: Other Time (Seconds) (Time-Related section of form)
    Units: Sec
    The ending time (or step) for the plot function trace.

    Field: OverrideH
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the default range of values displayed (or tabulated) for the horizontal
    axis of the plot function trace is to be overridden.

    Field: OverrideV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the default range of values displayed (or tabulated) for the vertical axis
    of the plot function trace is to be overridden.

    Field: HorizMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The minimum value displayed (or tabulated) along the horizontal axis of the plot function
    trace. If both the HorizMin and the HorizMax items are zero then the full horizontal range
    of the plot function trace is displayed.

    Field: HorizMax
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum value displayed (or tabulated) along the horizontal axis of the plot function
    trace. If both the HorizMin and the HorizMax items are zero then the full horizontal range
    of the plot function trace is displayed.

    Page 1015 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VertMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The minimum value displayed (or tabulated) along the vertical axis of the plot function
    trace. If both the VertMin and the VertMax items are zero then the full vertical range of
    the plot function trace is displayed.

    Field: VertMax
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum value displayed (or tabulated) along the vertical axis of the plot function
    trace. If both the VertMin and the VertMax items are zero then the full vertical range of
    the plot function trace is displayed.

    Field: HorizLabel
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The horizontal axis label for the plot function trace.

    Field: VertLabel
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The vertical axis label for the plot function trace.

    Field: GridOverlay
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if grid lines are displayed on the plot function trace. Otherwise it is No.

    Field: SSType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Magnitude or Phased indicating the type of plot function. This item
    only applies when the load case is a steady state load case.

    Page 1016 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SSPhaseAng
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    This is the phase angle for the output. This item only applies when the load case is a
    steady state load case and the SSType item is Phased.
    Table: Named Sets - Plot Function Traces 2 - Vertical Functions

    Field: PFNamedSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a plot function trace named set.

    Field: VertFunc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the vertical plot function in the plot function trace.

    Field: LineType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Solid, Dashed or Dotted indicating the line type used when the trace is
    displayed on the screen.

    Field: LineColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which the trace
    will be the trace will be displayed on the screen.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Page 1017 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VertSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A scale factor applied to the vertical plot function values in the trace.
    Table: Named Sets - Pushover

    Field: PONamedSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a pushover named set.

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load case for which the nonlinear static curve is generated.

    Field: PlotType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The type of pushover parameter set used in the specified named set. This is one of the
    following: Force-Displ,
    ATC40,
    FEMA356,
    FEMA440EL,
    FEMA440DM.

    Field: ParamName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a pushover parameter set of the type specified by the PlotType item.
    Table: Named Sets - Response Spectrum 1 - General

    Field: RSNamedSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a joint time history response spectrum named set.

    Page 1018 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Case
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load case for which the response spectrum curve is generated.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system in which the response spectrum curve is generated.

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either UX, UY, or UZ (U1, U2 or U3 for local) indicating the direction in the
    specified coordinate system for which the response spectrum curve is generated.

    Field: AbsType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either frequency or period indicating the data type for the abscissa (horizontal axis)
    of the response spectrum curve.

    Field: OrdType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either SD, SV, PSV, SA, or PSA indicating the data type for the ordinate (vertical
    axis) of the response spectrum curve.
    SD is spectral displacement, SV is spectral velocity, PSV is psuedo spectral velocity, SA is
    spectral acceleration, and PSA is psuedo spectral acceleration.

    Field: SpcWidening
    Field is Imported: Yes
    Format: Controlled by program
    Units: Percent
    The peaks of the spectrum are widened by two times this percentage of the frequency at
    the peak. For example, if the frequency at a peak of the spectrum is 0.5 cycles/sec, and the
    specified spectrum widening is 10%, then the peak is widened on each side by 0.10 * 0.5
    Page 1019 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    =.05 cycles per second. In other words, the peak is widened to extend from 0.45 cycles
    per second to 0.55 cycles per second.

    Field: OrdSF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A scale factor applied to the ordinate (vertical axis) values of the response spectrum.
    The scale factor item linearly scales the ordinates of the response spectrum. This scale
    factor can be useful if, for example, you have run your analysis in kip and inch units and
    you want to see a PSA response spectrum with the acceleration in g (acceleration of
    gravity) instead of inches/second2. If this were the case you would specify the scale factor
    as:
    1 / 386.4 = 0.002588.

    Field: NumJoints
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of joints specified in the named set.

    Field: NumDamping
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of different damping values specified in the named set.

    Field: DefFreqPer
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the Default Frequencies (or Periods) are included as values for which a
    point will exist on the generated response spectrum curve.
    The default frequencies in Hz are: 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1, 1.1, 1.2, 1.3, 1.4,
    1.5, 1.6, 1.8, 2, 2.2, 2.4, 2.6, 2.8, 3, 3.3, 3.6, 4, 4.4, 4.7, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 10,
    11, 12, 13, 14, 15, 16.5, 18, 20, 22, 25, 28 and 33. The default periods are equal to one
    divided by the default frequencies.

    Page 1020 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StrFreqPer
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the structural frequencies (periods) calculated by the program are
    frequencies (periods) for which a point will be generated on the response spectrum curve.
    The frequencies (periods) used are those for the modal load case that is associated with the
    specified load case for the response spectrum generation.

    Field: NumUserFP
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of user-specified frequency (or period) values for which a point will be
    generated on the response spectrum curve.

    Field: AbsScale
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The is either Arithmetic or Log indicating the type of scale used on the abscissa
    (horizontal axis) of the response spectrum curve.

    Field: OrdScale
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The is either Arithmetic or Log indicating the type of scale used on the ordinate (vertical
    axis) of the response spectrum curve.

    Field: GridOverlay
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if grid lines are displayed on the response spectrum plot. Otherwise it is
    No.
    Table: Named Sets - Response Spectrum 2 - Joints

    Field: RSNamedSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a joint time history response spectrum named set.
    Page 1021 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Joint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A joint for which a response spectrum curve is generated.
    Table: Named Sets - Response Spectrum 3 - Damping

    Field: RSNamedSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a joint time history response spectrum named set.

    Field: Damping
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A damping value for which a response spectrum curve is generated.
    Table: Named Sets - Response Spectrum 4 - User Freq/Periods

    Field: RSNamedSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a joint time history response spectrum named set.

    Field: FreqOrPer
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Frequency or Period. It indicates which of the following fields (Frequency
    or Period) will be read on import.

    Field: Frequency
    Field is Imported: Yes
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    A frequency value for which a point will be generated on the response spectrum curve.

    Page 1022 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Period
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    A period value for which a point will be generated on the response spectrum curve.
    Table: Options - Colors - Display

    Field: DeviceType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Screen, Printer or Color Printer indicating the device type to which the
    specified colors apply.

    Field: Points
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for point objects.

    Field: LinesFrame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for straight frame and curved frame type line objects.

    Field: LinesFrmDL
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for line distributed loads.

    Field: LinesCable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for cable type line objects.

    Page 1023 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LinesTendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for tendon type line objects.

    Field: SpringLinks
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for springs and for link objects.

    Field: Restraints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for restraints.

    Field: Releases
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for releases.

    Field: Axes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for the current coordinate system axes.

    Field: Text
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for text.

    Field: ShadowLines
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The color of the undeformed shape plot when the deformed shape is displayed.

    Page 1024 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GuideLines
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for guide lines (grids).

    Field: Highlight
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color used for highlighted objects in OpenGL and DirectX graphics.

    Field: Selection
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color used for selected objects in OpenGL and DirectX graphics.

    Field: AreaFillBot
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for fill on the bottom face of area objects. This is also the edge color of
    area objects that are not filled.
    .

    Field: AreaFillTop
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for fill on the top face of area objects.
    .

    Field: AreaFillSd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for fill on the side faces of area objects.
    This item only applies to OpenGL and DirectX graphics.

    Page 1025 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaEdge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for area object edges when the objects are filled.

    Field: SolidF1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for fill of solid objects. This is also the display color of solid objects
    edges when the objects are not filled. Finally, this is also the display color for face 1 of
    solid objects when they are displayed with color-coded faces.

    Field: SolidF2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for face 2 of solid objects when they are displayed with color-coded
    faces.

    Field: SolidF3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for face 3 of solid objects when they are displayed with color-coded
    faces.

    Field: SolidF4
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for face 4 of solid objects when they are displayed with color-coded
    faces.

    Field: SolidF5
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for face 5 of solid objects when they are displayed with color-coded
    faces.

    Page 1026 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SolidF6
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for face 6 of solid objects when they are displayed with color-coded
    faces.

    Field: SolidEdge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for solid object edges when the objects are filled.

    Field: Floor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The display color for the working plane floor. This item only applies to OpenGL and
    DirectX graphics.

    Field: Background
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    For Classical and Classical Plus graphics this is the background color of a window. For
    OpenGL and DirectX graphics this is the background color of the upper left quadrant of a
    window.

    Field: BGLowLeft
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The background color of the lower left quadrant of a window. This item only applies to
    OpenGL and DirectX graphics.

    Field: BGLowRight
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The background color of the lower right quadrant of a window. This item only applies to
    OpenGL and DirectX graphics.

    Page 1027 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BGUpRight
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The background color of the upper right quadrant of a window. This item only applies to
    OpenGL and DirectX graphics.

    Field: Darkness
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A value ranging from 0 to 1 that controls the variation of color (intensity of shading) when
    extruded shapes are displayed. A darkness value of 0 means there is no variation of color
    (and thus the extruded shape will not really be distinguishable). A darkness value of 1
    gives the maximum variation of color. The default value is 0.3; this value works well in
    most instances.
    Table: Options - Colors - Output

    Field: DeviceType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Screen, Printer or Color Printer indicating the device type to which the
    specified colors apply. CPrinter refers to a color printer.

    Field: Contour1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Field: Contour2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Page 1028 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Contour3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Field: Contour4
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Field: Contour5
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Field: Contour6
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Field: Contour7
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Field: Contour8
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Page 1029 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Contour9
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Field: Contour10
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Field: Contour11
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Field: Contour12
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Field: Contour13
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Field: Contour14
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Page 1030 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Contour15
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with contour displays. Contour1 is the color associated with the
    minimum value and Contour16 is that associated with the maximum value.

    Field: Transpare
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A value ranging from 0 to 1 that controls the transparency of the contours. A transparency
    value of 0 means contours are opaque. A factor of 1 gives the contours the maximum
    transparency. The default value is 0.5.

    Field: Ratio1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with interaction ratio displays. Ratio1 is the color associated with the
    minimum ratio and Ratio5 is that associated with the maximum ratio.

    Field: Ratio2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with interaction ratio displays. Ratio1 is the color associated with the
    minimum ratio and Ratio5 is that associated with the maximum ratio.

    Field: Ratio3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with interaction ratio displays. Ratio1 is the color associated with the
    minimum ratio and Ratio5 is that associated with the maximum ratio.

    Field: Ratio4
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with interaction ratio displays. Ratio1 is the color associated with the
    minimum ratio and Ratio5 is that associated with the maximum ratio.

    Page 1031 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ratio5
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with interaction ratio displays. Ratio1 is the color associated with the
    minimum ratio and Ratio5 is that associated with the maximum ratio.

    Field: RatioNotD
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with Not Yet Designed for interaction ratio displays.

    Field: RatioNotC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with Not Calculated for interaction ratio displays.

    Field: RatioVal1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    RatioVal1 through RatioVal4 are four user-defined interaction ratio values that are used to
    separate the different interaction ratio colors. RatioVal1 is the smallest value and
    RatioVal4 is the largest. RatioVal1 must be greater than 0 and typically RatioVal4 is set to
    1, although it can be less than or greater than 1, if desired. RatioVal1 through RatioVal4
    must be in ascending numerical order.

    Field: RatioVal2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    RatioVal1 through RatioVal4 are four user-defined interaction ratio values that are used to
    separate the different interaction ratio colors. RatioVal1 is the smallest value and
    RatioVal4 is the largest. RatioVal1 must be greater than 0 and typically RatioVal4 is set to
    1, although it can be less than or greater than 1, if desired. RatioVal1 through RatioVal4
    must be in ascending numerical order.

    Page 1032 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RatioVal3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    RatioVal1 through RatioVal4 are four user-defined interaction ratio values that are used to
    separate the different interaction ratio colors. RatioVal1 is the smallest value and
    RatioVal4 is the largest. RatioVal1 must be greater than 0 and typically RatioVal4 is set to
    1, although it can be less than or greater than 1, if desired. RatioVal1 through RatioVal4
    must be in ascending numerical order.

    Field: RatioVal4
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    RatioVal1 through RatioVal4 are four user-defined interaction ratio values that are used to
    separate the different interaction ratio colors. RatioVal1 is the smallest value and
    RatioVal4 is the largest. RatioVal1 must be greater than 0 and typically RatioVal4 is set to
    1, although it can be less than or greater than 1, if desired. RatioVal1 through RatioVal4
    must be in ascending numerical order.

    Field: DFillPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with diagram fill for positive values.

    Field: DFillNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with diagram fill for negative values.

    Field: DFillRPos
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with diagram fill for positive range values.

    Field: DFillRNeg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Color associated with diagram fill for negative range values.
    Page 1033 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Overwrites - Aluminum Design - AA-ASD 2000

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame.This item is used for
    ductility considerations in the design.The program determined value is taken from the
    steel preferences.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1034 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.This factor is also used for determining the length for lateral-torsional
    buckling.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is also used for determining the effective
    length for lateral-torsional buckling.
    Page 1035 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for major axis bending. It captures the effect of non-uniform moment
    distribution along the length.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for minor axis bending. It captures the effect of non-uniform moment
    distribution along the length.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless coefficient that depends on the moment gradient. Specifying 0 means the value is
    program determined.

    Field: K1Comp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient for determining slenderness limit for elements in compression. Specifying 0
    means the value is program determined.

    Page 1036 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: K2Comp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient for determining limit state compressive stress for elements in compression.
    Specifying 0 means the value is program determined.

    Field: K1Bend
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient for determining slenderness limit for elements in bending. Specifying 0 means
    the value is program determined.

    Field: K2Bend
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient for determining limit state compressive stress for elements in bending.
    Specifying 0 means the value is program determined.

    Field: KT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient for tension members, kt. Specifying 0 means the value is program determined.

    Field: C1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Lateral buckling coefficient, C1. Specifying 0 means the value is program determined.

    Field: C2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Lateral buckling coefficient, C2. Specifying 0 means the value is program determined.

    Page 1037 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fa
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Factored limit state compressive stress, Fa, where (Fa = Phi * FL), for member considered
    as an axially loaded column. Specifying 0 means the value is program determined.

    Field: Ft
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Factored limit state tensile stress for a member loaded only axially. Specifying 0 means
    the value is program determined.

    Field: Fb3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Factored limit state bending stress, Fb, where (Fb = Phi * FL), for major axis bending for
    members subjected to bending only. Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Fb2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Factored limit state bending stress, Fb, where (Fb = Phi * FL), for minor axis bending for
    members subjected to bending only. Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fs2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Factored limit state shear stress for major direction shear for members subjected only to
    shear or torsion. Specifying 0 means the value is program determined.

    Page 1038 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Fs3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Factored limit state shear stress for minor direction shear for members subjected only to
    shear or torsion. Specifying 0 means the value is program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Table: Overwrites - Aluminum Design - AA-LRFD 2000

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame.This item is used for
    ductility considerations in the design.The program determined value is taken from the
    steel preferences.

    Page 1039 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.This factor is also used for determining the length for lateral-torsional
    buckling.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Page 1040 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is also used for determining the effective
    length for lateral-torsional buckling.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for major axis bending. It captures the effect of non-uniform moment
    distribution along the length.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for minor axis bending. It captures the effect of non-uniform moment
    distribution along the length.Specifying 0 means the value is program determined.
    Page 1041 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless coefficient that depends on the moment gradient. Specifying 0 means the value is
    program determined.

    Field: K1Comp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient for determining slenderness limit for elements in compression. Specifying 0
    means the value is program determined.

    Field: K2Comp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient for determining limit state compressive stress for elements in compression.
    Specifying 0 means the value is program determined.

    Field: K1Bend
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient for determining slenderness limit for elements in bending. Specifying 0 means
    the value is program determined.

    Field: K2Bend
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient for determining limit state compressive stress for elements in bending.
    Specifying 0 means the value is program determined.

    Page 1042 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: KT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Coefficient for tension members, kt. Specifying 0 means the value is program determined.

    Field: C1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Lateral buckling coefficient, C1. Specifying 0 means the value is program determined.

    Field: C2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Lateral buckling coefficient, C2. Specifying 0 means the value is program determined.

    Field: Fa
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Factored limit state compressive stress, Fa, where (Fa = Phi * FL), for member considered
    as an axially loaded column. Specifying 0 means the value is program determined.

    Field: Ft
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Factored limit state tensile stress for a member loaded only axially. Specifying 0 means
    the value is program determined.

    Field: Fb3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Factored limit state bending stress, Fb, where (Fb = Phi * FL), for major axis bending for
    members subjected to bending only. Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1043 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fb2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Factored limit state bending stress, Fb, where (Fb = Phi * FL), for minor axis bending for
    members subjected to bending only. Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fs2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Factored limit state shear stress for major direction shear for members subjected only to
    shear or torsion. Specifying 0 means the value is program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Fs3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Factored limit state shear stress for minor direction shear for members subjected only to
    shear or torsion. Specifying 0 means the value is program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Table: Overwrites - Auto Wave Loads - Cable

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1044 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadByWave
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the element is loaded by the wave; otherwise it is No. The default value
    is Yes. This item allows you to specify that elements that would otherwise be loaded by
    the wave are not loaded by the wave.

    Field: LoadDisc
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum discretization length for distributed wave loads applied to the object. A
    value is calculated for the distributed load at locations along the object not exceeding the
    discretization length. The magnitude of the distributed wave load is assumed to vary
    linearly between these calculated locations. Specifying zero or a negative value means the
    item is program determined.

    Field: MarineGrow
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of marine growth on the element. Specifying a negative value means the
    item is program determined.

    Field: DimForce2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The dimension of the frame element in the local 2 direction used to determine the wave or
    wave wind force acting on the element. The specified marine growth or ice thickness is
    added to this dimension when calculating the force on the element. Specifying a negative
    value means the item is program determined.

    Field: DimForce3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The dimension of the frame element in the local 3 direction used to determine the wave or
    wave wind force acting on the element. The specified marine growth or ice thickness is
    added to this dimension when calculating the force on the element. Specifying a negative
    value means the item is program determined.

    Page 1045 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DragCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The drag coefficient for the element. Specifying a negative value means the item is
    program determined.

    Field: InerCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The inertia coefficient for the element. Specifying a negative value means the item is
    program determined.

    Field: Flooded
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the element is flooded; otherwise it is No. The default value is No.
    This item affects the cross-sectional area used in computing the concentrated compressive
    bouyant forces applied at the object nodes. For flooded members the section area is used.
    For non-flooded members the enclosed area is used.

    Field: LoadByWind
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the element is loaded by the wave wind load; otherwise it is No. The
    default value is Yes. This item allows you to specify that elements that would otherwise
    be loaded by the wave wind load are not loaded by the wind.

    Field: ShapeCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shape coefficient (for wave wind load) for the element. The default value is 1.
    Specifying a negative value means the item is program determined.

    Page 1046 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IceThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of ice on the element. This item is only used for wave wind loads. If both
    marine growth and ice are specified at a location then only the marine growth value is
    used. Specifying a negative value means the item is program determined.

    Field: ShieldFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The wind load on an element is multiplied by this shielding factor. The default value is 1.
    Specifying a negative value means the item is program determined (the default value is
    used).
    Table: Overwrites - Auto Wave Loads - Frame

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: LoadByWave
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the element is loaded by the wave; otherwise it is No. The default value
    is Yes. This item allows you to specify that elements that would otherwise be loaded by
    the wave are not loaded by the wave.

    Field: LoadDisc
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The maximum discretization length for distributed wave loads applied to the object. A
    value is calculated for the distributed load at locations along the object not exceeding the
    discretization length. The magnitude of the distributed wave load is assumed to vary
    linearly between these calculated locations. Specifying zero or a negative value means the
    item is program determined.

    Page 1047 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MarineGrow
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of marine growth on the element. Specifying a negative value means the
    item is program determined.

    Field: DimForce2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The dimension of the frame element in the local 2 direction used to determine the wave or
    wave wind force acting on the element. The specified marine growth or ice thickness is
    added to this dimension when calculating the force on the element. Specifying a negative
    value means the item is program determined.

    Field: DimForce3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The dimension of the frame element in the local 3 direction used to determine the wave or
    wave wind force acting on the element. The specified marine growth or ice thickness is
    added to this dimension when calculating the force on the element. Specifying a negative
    value means the item is program determined.

    Field: DragCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The drag coefficient for the element. Specifying a negative value means the item is
    program determined.

    Field: InerCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The inertia coefficient for the element. Specifying a negative value means the item is
    program determined.

    Page 1048 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Flooded
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the element is flooded; otherwise it is No. The default value is No.
    This item affects the cross-sectional area used in computing the concentrated compressive
    bouyant forces applied at the object nodes. For flooded members the section area is used.
    For non-flooded members the enclosed area is used.

    Field: LoadByWind
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the element is loaded by the wave wind load; otherwise it is No. The
    default value is Yes. This item allows you to specify that elements that would otherwise
    be loaded by the wave wind load are not loaded by the wind.

    Field: ShapeCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shape coefficient (for wave wind load) for the element. The default value is 1.
    Specifying a negative value means the item is program determined.

    Field: IceThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of ice on the element. This item is only used for wave wind loads. If both
    marine growth and ice are specified at a location then only the marine growth value is
    used. Specifying a negative value means the item is program determined.

    Field: ShieldFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The wind load on an element is multiplied by this shielding factor. The default value is 1.
    Specifying a negative value means the item is program determined (the default value is
    used).
    Table: Overwrites - Auto Wind Loads - Cable

    Page 1049 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cable
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Cable object.

    Field: LoadByWind
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the element is loaded by the wind; otherwise it is No. The default value
    is Yes. This item allows you to specify that elements that would otherwise be loaded by
    the wind are not loaded by the wind.

    Field: IceThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of ice on the element. This item is only used to increase the projected area
    of the frame object for wind loads. It is not used for gravity loads to increase the weight
    of the frame object. Specifying a negative value means the item is program determined.

    Field: Cf
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The net force coefficient, Cf, or, for API 4F the shape coefficient, Cs, for the frame object.
    Specifying a negative value means the item is program determined (the default value is
    used).
    Table: Overwrites - Auto Wind Loads - Frame

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1050 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadByWind
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the element is loaded by the wind; otherwise it is No. The default value
    is Yes. This item allows you to specify that elements that would otherwise be loaded by
    the wind are not loaded by the wind.

    Field: IceThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of ice on the element. This item is only used to increase the projected area
    of the frame object for wind loads. It is not used for gravity loads to increase the weight
    of the frame object. Specifying a negative value means the item is program determined.

    Field: Cf
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The net force coefficient, Cf, or, for API 4F the shape coefficient, Cs, for the frame object.
    Specifying a negative value means the item is program determined (the default value is
    used).
    Table: Overwrites - Cold Formed Design - AISI-ASD96

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Page 1051 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame.for ductility
    considerations in the design. The program determined value is This item is used taken
    from the cold-formed steel preferences.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.This factor is also used for determining the length for lateral-torsional
    buckling.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1052 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is also used for determining the effective
    length for lateral-torsional buckling.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the along the length.
    interaction ratio. It captures the effect of non-uniform moment distribution Specifying 0
    means the value is program determined.

    Page 1053 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the the length. interaction
    ratio. It captures the effect of non-uniform moment distribution along Specifying 0 means
    the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CtfMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Ctf for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CtfMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Ctf for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. Specifying 0
    means the value is program determined.
    Page 1054 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment.
    Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: AlphaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Pnc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Nominal axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Pnt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Nominal axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mn33Yield
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal bending moment capacity in major axis bending for initial yielding. Specifying 0
    means the value is program determined.

    Page 1055 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Mn22Yield
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal bending moment capacity in minor axis bending for initial yielding. Specifying
    0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Mn33LTB
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal bending moment capacity in major axis bending for lateral-torsional buckling.
    Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Mn22LTB
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal bending moment capacity in minor axis bending for lateral-torsional buckling.
    Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Vn2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Nominal shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    Page 1056 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Vn3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Nominal shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: FastToDeck
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Specifies whether the section is through fastened.

    Field: FastEcc
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Fastener eccentricity if the section is through fastened.

    Field: HoleDiaTop
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Hole diameter at the top flange if there is any.

    Field: HoleDiaBot
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Hole diameter at the bottom flange if there is any.

    Page 1057 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HoleDiaWeb
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Hole diameter at the web flange if there is any.
    Table: Overwrites - Cold Formed Design - AISI-LRFD96

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame.for ductility
    considerations in the design. The program determined value is This item is used taken
    from the cold-formed steel preferences.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame

    Page 1058 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.This factor is also used for determining the length for lateral-torsional
    buckling.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1059 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is also used for determining the effective
    length for lateral-torsional buckling.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the along the length.
    interaction ratio. It captures the effect of non-uniform moment distribution Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the the length. interaction
    ratio. It captures the effect of non-uniform moment distribution along Specifying 0 means
    the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CtfMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Ctf for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    Page 1060 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CtfMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Ctf for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. Specifying 0
    means the value is program determined.

    Field: AlphaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment.
    Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: AlphaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Page 1061 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Pnc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Nominal axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Pnt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Nominal axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mn33Yield
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal bending moment capacity in major axis bending for initial yielding. Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Mn22Yield
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal bending moment capacity in minor axis bending for initial yielding. Specifying
    0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Mn33LTB
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal bending moment capacity in major axis bending for lateral-torsional buckling.
    Specifying 0 means the value is program determined.

    Page 1062 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Mn22LTB
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal bending moment capacity in minor axis bending for lateral-torsional buckling.
    Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Vn2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Nominal shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Vn3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Nominal shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: FastToDeck
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Specifies whether the section is through fastened.

    Page 1063 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FastEcc
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Fastener eccentricity if the section is through fastened.

    Field: HoleDiaTop
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Hole diameter at the top flange if there is any.

    Field: HoleDiaBot
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Hole diameter at the bottom flange if there is any.

    Field: HoleDiaWeb
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Hole diameter at the web flange if there is any.
    Table: Overwrites - Concrete Design - AASHTO Concrete 07

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Page 1064 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    Page 1065 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1066 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    Page 1067 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - ACI 318-02

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    Page 1068 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.

    Page 1069 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1070 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - ACI 318-05/IBC2003

    Page 1071 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1072 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1073 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    Page 1074 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - ACI 318-08/IBC2009

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1075 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    Page 1076 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    determining the length for lateral-torsional buckling.Program determined value means it is


    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1077 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    Page 1078 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - ACI 318-11

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Page 1079 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    Page 1080 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1081 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    Page 1082 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - ACI 318-99

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    Page 1083 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.

    Page 1084 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1085 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - AS 3600-09

    Page 1086 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1087 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1088 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: kmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DbMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DbMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    Page 1089 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - AS 3600-01

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1090 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    Page 1091 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    determining the length for lateral-torsional buckling.Program determined value means it is


    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: kmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1092 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DbMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DbMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    Page 1093 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - BS8110 89

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Page 1094 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: BetaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    Page 1095 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: BetaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1096 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    Page 1097 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - BS8110 97

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    Page 1098 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: BetaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: BetaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.

    Page 1099 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1100 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - Chinese 2010

    Page 1101 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1102 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KMajorGrav
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: KMinorGrav
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis when gravity
    governs.This item is specified as a fraction of the frame object length.Multiplying the
    frame object length with this factor gives the effective length for the object.This item only
    Page 1103 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    applies to frame objects with column-type current design sections.This item is taken as 1
    by default.It is not calculated.Specifying 0 means the value is program default which is 1.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: SDGrade
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: DualSMF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Toggle to consider whether this frame member (column, beam, brace) has to be considered
    as part of the "Transfer Frame"This is either"No" or "Yes". Program determined value
    means default value which is "No".

    Field: MMF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Toggle to consider whether this frame member (column, beam, brace) has to be considered
    as part of the "Transfer Frame"This is either"No" or "Yes". Program determined value
    means default value which is "No".

    Field: SMF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Toggle to consider whether this frame member (column, beam, brace) has to be considered
    as part of the "Transfer Frame"This is either"No" or "Yes". Program determined value
    means default value which is "No".

    Page 1104 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AFMF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Toggle to consider whether this frame member (column, beam, brace) has to be considered
    as part of the "Transfer Frame"This is either"No" or "Yes". Program determined value
    means default value which is "No".

    Field: ColLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider whether this frame member (column, beam, brace) has to be considered
    as part of the "Transfer Frame"This is either"No" or "Yes". Program determined value
    means default value which is "No".

    Field: TransferObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether this frame member (column, beam, brace) has to be considered
    as part of the "Transfer Frame"This is either"No" or "Yes". Program determined value
    means default value which is "No".

    Field: CornerCol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether this frame member (column, beam, brace) has to be considered
    as part of the "Transfer Frame"This is either"No" or "Yes". Program determined value
    means default value which is "No".

    Field: BmGravFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Toggle to consider whether this frame member (column, beam, brace) has to be considered
    as part of the "Transfer Frame"This is either"No" or "Yes". Program determined value
    means default value which is "No".

    Page 1105 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TorsMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Torsion Magnification Factor. It should not be less than 0.4 and should not be greater than
    1.0.Specifying 0 means the value is program determined.The program determined value is
    taken as 1.

    Field: TorsZeta
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Torsion Design Factor (Zeta)This allows the designer to distribute the design strength
    between shear and torsion modes.Specifying 0 means the value is program
    determined.The program determined value is taken as 1The program does not do any
    automatic iteration for this factor.The user is expected to change this value and experiment
    with this factor.

    Field: TorsCover
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Concrete Cover for Closed StirrupThis has a dimension of length.Specifying 0 means the
    value is program determined.The program determined value is based on 0.5 inch or 15 mm
    clear cover.
    Table: Overwrites - Concrete Design - CSA-A233-04

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Page 1106 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1107 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1108 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DbMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DbMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    Page 1109 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Rd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Ductility related force modification factor. See NBC Table 4.1.8.9 for details. Specifying
    0 means the value is program determined.

    Field: Ro
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Overstrength Related Force Modification Factor. See NBC Table 4.1.8.9 for details.
    Specifying 0 means the value is program determined.

    Field: MaxAggSize
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Maximum aggregate size used in concrete. Concrete shear strength depends on it.
    Table: Overwrites - Concrete Design - CSA-A233-94

    Page 1110 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1111 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1112 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DbMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DbMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    Page 1113 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - EUROCODE 2-1992

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1114 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    Page 1115 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    determining the length for lateral-torsional buckling.Program determined value means it is


    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: BetaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: BetaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1116 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    Page 1117 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - Eurocode 2-2004

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Page 1118 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: BetaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    Page 1119 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: BetaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1120 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    Page 1121 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Kr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Correction factor that depends on axial load, used with the Nominal Curvature method.
    See EC2 5.8.8.3(3) for details. This item is taken as 1 by default. It is not calculated.
    Specifying 0 means the value is program default which is 1.

    Field: KPhi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor taking account of creep. See EC2 5.8.8.3(4) for details. This item is taken as 1 by
    default. It is not calculated. Specifying 0 means the value is program default which is 1.
    Table: Overwrites - Concrete Design - Hong Kong CP 2013

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    .

    Page 1122 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: BetaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: BetaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Page 1123 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .
    Table: Overwrites - Concrete Design - Hong Kong CP 2004

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Page 1124 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1125 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BetaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: BetaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1126 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    Page 1127 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - Indian IS 456-2000

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Page 1128 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    Page 1129 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: TopLeftAs
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Actual top rebar area provided at the left end of the beam. This is used only for calculating
    beam capacity shear. This has a dimension of area. Specifying 0 means the value is
    program determined.Program determined value means it is calculated for each element
    uniquely.

    Field: BotLeftAs
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Actual bottom rebar area provided at the left end of the beam. This is used only for
    calculating beam capacity shear. This has a dimension of area. Specifying 0 means the
    value is program determined.Program determined value means it is calculated for each
    element uniquely.

    Field: TopRhtAs
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Actual top rebar area provided at the right end of the beam. This is used only for
    calculating beam capacity shear. This has a dimension of area. Specifying 0 means the
    value is program determined.Program determined value means it is calculated for each
    element uniquely.

    Page 1130 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BotRhtAs
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Actual bottom rebar area provided at the right end of the beam. This is used only for
    calculating beam capacity shear. This has a dimension of area. Specifying 0 means the
    value is program determined.Program determined value means it is calculated for each
    element uniquely.
    Table: Overwrites - Concrete Design - Italian NTC 2008

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Page 1131 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: BetaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1132 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BetaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    Page 1133 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Page 1134 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Kr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Correction factor that depends on axial load, used with the Nominal Curvature method.
    See EC2 5.8.8.3(3) for details. This item is taken as 1 by default. It is not calculated.
    Specifying 0 means the value is program default which is 1.

    Field: KPhi
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Factor taking account of creep. See EC2 5.8.8.3(4) for details. This item is taken as 1 by
    default. It is not calculated. Specifying 0 means the value is program default which is 1.
    Table: Overwrites - Concrete Design - Italian DM 14-2-92

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Page 1135 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    Page 1136 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: OmegaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: OmegaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1137 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CSwayMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CSwayMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    Page 1138 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - KCI-1999

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    Page 1139 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.

    Page 1140 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1141 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - Mexican RCDF 2004

    Page 1142 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1143 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1144 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FabMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FabMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    Page 1145 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FasMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FasMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - Mexican RCDF 2001

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1146 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    Page 1147 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    determining the length for lateral-torsional buckling.Program determined value means it is


    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1148 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FabMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FabMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FasMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    Page 1149 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FasMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - NZS 3101-06

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Page 1150 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    Page 1151 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1152 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DbMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DbMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    Page 1153 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - NZS 3101-95

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    Page 1154 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.

    Page 1155 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DbMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1156 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DbMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - Singapore CP 65-99

    Page 1157 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1158 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: BetaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: BetaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1159 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    Page 1160 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - TS 500-2000

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1161 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    Page 1162 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    determining the length for lateral-torsional buckling.Program determined value means it is


    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1163 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: BnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: BnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: BsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    Page 1164 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: BsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Concrete Design - UBC97

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Sway Special", "Sway Intermediate", "Sway Ordinary", or "NonSway".
    This item is used for ductility considerations in seismic design.Program determined value
    means that it defaults to the highest ductility requirement.

    Page 1165 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Program determined value means it is calculated
    for each element uniquely.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Program determined value means it
    is calculated for each element uniquely.Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.This factor is also used for
    determining the length for lateral-torsional buckling.Program determined value means it is
    calculated for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    Page 1166 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.This item only applies to frame objects
    with column-type current design sections.Program determined value means it is calculated
    for each element uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the interaction ratio. This item
    only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1167 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DnsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DnsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor-axis bending moment. This
    item only applies to frame objects with column-type current design sections.Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as
    Page 1168 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    1because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required. This item only applies to frame objects with
    column-type current design sections.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Table: Overwrites - Steel Design - AASHTO-LRFD-2007

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Page 1169 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1170 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for lateral-torsional buckling for the frame object.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.

    Field: K1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: K1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: K2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    Page 1171 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: K2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for lateral-torsional buckling. This item is specified as a fraction of
    the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is taken as 1 by default. This should be set by the user.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1172 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: B1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: B1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1173 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: B2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: B2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: HSSReduceT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the reduction of HSS (box or Pipe) thickness should be
    considered. This is either"No" or "Yes".

    Field: HSSWelding
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"ERW" or "SAW" indicating the procedure used for welding.

    Page 1174 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Omega0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Omega0 factor related to seismic force and ductility. Specifying 0 means the value is
    program determined.Program determined value means it is taken from the seismic load
    definition or general preferences.

    Field: Ry
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the expected yield strength to the minimum specified yield strength. This
    ratio is used in capacity based design for special seismic cases. Specifying 0 means the
    value is program determined.

    Field: Pnc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Pnt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mn3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1175 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mn2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Vn2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Vn3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Page 1176 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1177 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.

    Page 1178 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.Program determined value means it is taken from the
    steel preferences.Specifying 0 means the value is program determined.
    Table: Overwrites - Steel Design - AISC 360-10

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Page 1179 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1180 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for lateral-torsional buckling for the frame object.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.

    Field: K1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: K1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: K2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    Page 1181 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: K2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for lateral-torsional buckling. This item is specified as a fraction of
    the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is taken as 1 by default. This should be set by the user.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1182 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: B1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: B1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1183 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: B2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: B2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: HSSReduceT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the reduction of HSS (box or Pipe) thickness should be
    considered. This is either"No" or "Yes".

    Field: HSSWelding
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"ERW" or "SAW" indicating the procedure used for welding.

    Page 1184 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Omega0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Omega0 factor related to seismic force and ductility. Specifying 0 means the value is
    program determined.Program determined value means it is taken from the seismic load
    definition or general preferences.

    Field: Ry
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the expected yield strength to the minimum specified yield strength. This
    ratio is used in capacity based design for special seismic cases. Specifying 0 means the
    value is program determined.

    Field: Pnc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Pnt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mn3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1185 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mn2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Vn2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Vn3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Page 1186 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1187 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.

    Page 1188 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.Program determined value means it is taken from the
    steel preferences.Specifying 0 means the value is program determined.
    Table: Overwrites - Steel Design - AISC360-05-IBC2006

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Page 1189 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1190 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for lateral-torsional buckling for the frame object.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.

    Field: K1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: K1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: K2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    Page 1191 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: K2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for lateral-torsional buckling. This item is specified as a fraction of
    the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is taken as 1 by default. This should be set by the user.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1192 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: B1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: B1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1193 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: B2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: B2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: HSSReduceT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the reduction of HSS (box or Pipe) thickness should be
    considered. This is either"No" or "Yes".

    Field: HSSWelding
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"ERW" or "SAW" indicating the procedure used for welding.

    Page 1194 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Omega0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Omega0 factor related to seismic force and ductility. Specifying 0 means the value is
    program determined.Program determined value means it is taken from the seismic load
    definition or general preferences.

    Field: Ry
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the expected yield strength to the minimum specified yield strength. This
    ratio is used in capacity based design for special seismic cases. Specifying 0 means the
    value is program determined.

    Field: Pnc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Pnt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mn3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1195 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mn2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Vn2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Vn3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Page 1196 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1197 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.

    Page 1198 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.Program determined value means it is taken from the
    steel preferences.Specifying 0 means the value is program determined.
    Table: Overwrites - Steel Design - AISC-ASD01

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Page 1199 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1200 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1201 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: Omega0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Omega0 factor related to seismic force and ductility. Specifying 0 means the value is
    program determined.Program determined value means it is taken from the seismic load
    definition or general preferences.

    Field: Fa
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable axial compressive stress. Specifying 0 means the value is program determined.

    Field: Ft
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable axial tensile stress. Specifying 0 means the value is program determined.

    Page 1202 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fb3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable bending stress in major axis bending. Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Fb2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable bending stress in minor axis bending. Specifying 0 means the value is program
    determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fv2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable shear stress for major direction shear. Specifying 0 means the value is program
    determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Fv3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable shear stress for minor direction shear. Specifying 0 means the value is program
    determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 1203 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1204 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.
    Page 1205 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - AISC-ASD89

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Page 1206 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1207 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1208 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: Fa
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable axial compressive stress. Specifying 0 means the value is program determined.

    Field: Ft
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable axial tensile stress. Specifying 0 means the value is program determined.

    Field: Fb3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable bending stress in major axis bending. Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1209 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fb2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable bending stress in minor axis bending. Specifying 0 means the value is program
    determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fv2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable shear stress for major direction shear. Specifying 0 means the value is program
    determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Fv3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable shear stress for minor direction shear. Specifying 0 means the value is program
    determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Page 1210 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1211 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - AISC-LRFD93
    Page 1212 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Page 1213 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.

    Page 1214 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1215 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: B1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: B1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: B2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1216 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: B2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: PhiPnc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: PhiPnt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: PhiMn3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: PhiMn2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.

    Page 1217 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: PhiVn2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: PhiVn3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Page 1218 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1219 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - AISC-LRFD99

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1220 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Page 1221 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    Page 1222 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: B1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    Page 1223 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: B1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: B2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: B2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1224 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Omega0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Omega0 factor related to seismic force and ductility. Specifying 0 means the value is
    program determined.Program determined value means it is taken from the seismic load
    definition or general preferences.

    Field: Ry
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the expected yield strength to the minimum specified yield strength. This
    ratio is used in capacity based design for special seismic cases. Specifying 0 means the
    value is program determined.

    Field: PhiPnc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: PhiPnt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: PhiMn3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1225 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiMn2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: PhiVn2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: PhiVn3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Page 1226 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1227 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - API RP2A-LRFD 97
    Page 1228 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Page 1229 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.

    Page 1230 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1231 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: B1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: B1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: B2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1232 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: B2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: PresEqual
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether pipe's internal fluid pressure is equalized with the outer fluid
    pressure. This is either"No" or "Yes".

    Field: ExtPres
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Additional external pressure added to any wave load pressure and used in the
    design/check. Its value can be positive or negative. Positive generates hoop compression
    and negative generates hoop tension.

    Field: PhiPnc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: PhiPnt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Page 1233 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiMn3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: PhiMn2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: PhiVn2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: PhiVn3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 1234 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1235 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.
    Page 1236 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - API RP2A-WSD2000

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Page 1237 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1238 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1239 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: PresEqual
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether pipe's internal fluid pressure is equalized with the outer fluid
    pressure. This is either"No" or "Yes".

    Field: ExtPres
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Additional external pressure added to any wave load pressure and used in the
    design/check. Its value can be positive or negative. Positive generates hoop compression
    and negative generates hoop tension.

    Field: Fa
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable axial compressive stress. Specifying 0 means the value is program determined.

    Page 1240 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ft
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable axial tensile stress. Specifying 0 means the value is program determined.

    Field: Fb3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable bending stress in major axis bending. Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Fb2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable bending stress in minor axis bending. Specifying 0 means the value is program
    determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fv2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable shear stress for major direction shear. Specifying 0 means the value is program
    determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 1241 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fv3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable shear stress for minor direction shear. Specifying 0 means the value is program
    determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Page 1242 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Page 1243 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - ASCE 10-97

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Page 1244 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1245 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1246 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: Pac
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Pat
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.
    Page 1247 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ma3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Ma2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fv2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Fv3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 1248 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1249 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.
    Page 1250 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - AS 4100-1998

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Page 1251 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: SteelType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Hot Rolled", "Hot Finished", "Cold Formed", "Stress Relieved", "Lightly
    Welded", or "Heavily Welded" indicating the residual stress level in the structural section.
    This affects plasticity limit and yield limit of plate element slenderness values. Eventually
    this can affect moment capacity and axial compression capacity through modification on
    Ze and Aeff. "Hot Rolled" and "Hot Finished" are used synonymously in this program.
    "Cold Formed" is meant as cold-formed and not stress-relieved. "Stress Relieved" is
    meant as cold-formed and stress-relieved. Welded H and I sections are assumed to be
    fabricated from flame-cut plates. See sections 5.2.2, 6.2.4, 6.3.3, and Tables 5.2, 6.2.4,
    6.3.3(1), and 6.3.3(2) of "AS 4100:1998/NZS 3404:1997" code for details.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1252 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XLLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for lateral-torsional buckling for the frame object.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.

    Field: keMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: keMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    Page 1253 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: keSwayMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: keSwayMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ktLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Page 1254 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: krLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Lateral rotation restraint effective length factor for members subjected to flexure. It is
    unitless. It affects lateral-torsional buckling capacity, Mb by affecting Mo and alpha_s.
    Its value depends on lateral or rotational restraints. Specifying 0 means the value is
    program default. See section 5.6.3 and Table 5.6.3(3) of "AS 4100:1998/NZS 3404:1997"
    code for details.

    Field: klLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Load height effective length factor for members subjected to flexure. It is unitless. It
    affects lateral-torsional buckling capacity, Mb by affecting Mo and alpha_s. Its value
    depends on lateral or rotational restraints and load height position. Specifying 0 means the
    value is program default. See section 5.6.3 and Table 5.6.3(2) of "AS 4100:1998/NZS
    3404:1997" code for details.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1255 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Alpham
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Moment modification factor for distribution of bending moments in a member subjected to
    flexure. It is unitless. It captures the effect of non-uniform moment distribution along the
    length.Program determined value means it is calculated for each element for each load
    combination uniquely.Specifying 0 means the value is program determined.See sections
    5.6.1.1 and 5.6.2 and Tables 5.6.1 and 5.6.2 of "AS 4100:1998/NZS 3404:1997" code for
    details.

    Field: Alphas
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Slenderness reduction factor for a member subjected to flexure. It is unitless. Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.See section 5.6.1.1 "AS
    4100:1998/NZS 3404:1997" code for details.

    Field: Kf
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Form factor for members subjected to axial compression. It is unitless. Its value is 1 for
    compact sections and less than one for non-compact and slender sections. Specifying 0
    means the value is program determined.See sections 6.2.1, 6.3.3, 8.3.2, 8.4.2.2, and 8.4.4.1
    of "AS 4100:1998/NZS 3404:1997" code for details.

    Field: KtAxial
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Correction factor for distribution of forces for members subjected to axial tension. It is
    unitless. Its value depends on the connections and can be less than or equal to one for any
    sections. Specifying 0 means the value is program default which is 1.See sections 7.2,
    7.3.1, and 7.3.2 and Table 7.3.2 of "AS 4100:1998/NZS 3404:1997" code for details.

    Field: DbMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    Page 1256 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DbMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1257 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ns
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Nt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Ms3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Ms2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Mb
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable critical moment capacity for major axis bending. Specifying 0 means the value
    is program determined.

    Page 1258 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Vv2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Vv3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Page 1259 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1260 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.

    Field: DCLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.Program determined value means it is taken from the
    steel preferences.Specifying 0 means the value is program determined.
    Page 1261 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Overwrites - Steel Design - BS5950 2000

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Page 1262 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.

    Page 1263 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1264 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MLT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: Pc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Pt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mc3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Mc2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1265 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mb
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable critical moment capacity for major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Pv2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Pv3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Page 1266 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1267 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - BS5950 90
    Page 1268 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Page 1269 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.

    Page 1270 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1271 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: N
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: Pc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Pt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mc3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Mc2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1272 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mb
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable critical moment capacity for major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Pv2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Pv3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Page 1273 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1274 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - CAN-CSA-S16-01
    Page 1275 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Page 1276 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XLLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for lateral-torsional buckling for the frame object.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.

    Page 1277 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for lateral-torsional buckling. This item is specified as a fraction of
    the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is taken as 1 by default. This should be set by the user.

    Field: Omega1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.

    Page 1278 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Omega1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Omega2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: U1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: U1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Page 1279 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: U2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: NPower
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Parameter for Compression Resistance. Unitless factor used in the calculation of
    compression resistance. Its value should be picked up for the compression curve. Typical
    values are 2.24 (SSRC Curve 1), 1.34 (SSRC Curve 2), and 1.00 (SSRC Curve 3). Lower
    values are conservative. Its effect is minimal if lambda is close to zero or very large
    (lambda > 2.0). See CSA-S16-01/S16S1-05 section 13.3.1 and related commentary.
    Specifying 0 means the value is program determined.

    Field: Ry
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the expected yield strength to the minimum specified yield strength. This
    ratio is used in capacity based design for special seismic cases. Specifying 0 means the
    value is program determined.

    Page 1280 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cr
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Tr
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mr3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Mr2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Vr2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    Page 1281 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Vr3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Page 1282 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Page 1283 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - CSA-S16-09

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Page 1284 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1285 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XLLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for lateral-torsional buckling for the frame object.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    Page 1286 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for lateral-torsional buckling. This item is specified as a fraction of
    the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is taken as 1 by default. This should be set by the user.

    Field: Omega1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Omega1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Omega2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Page 1287 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: U1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: U2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: U2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.

    Page 1288 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: NPower
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Parameter for Compression Resistance. Unitless factor used in the calculation of
    compression resistance. Its value should be picked up for the compression curve. Typical
    values are 2.24 (SSRC Curve 1), 1.34 (SSRC Curve 2), and 1.00 (SSRC Curve 3). Lower
    values are conservative. Its effect is minimal if lambda is close to zero or very large
    (lambda > 2.0). See CSA-S16-01/S16S1-05 section 13.3.1 and related commentary.
    Specifying 0 means the value is program determined.

    Field: Ry
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the expected yield strength to the minimum specified yield strength. This
    ratio is used in capacity based design for special seismic cases. Specifying 0 means the
    value is program determined.

    Field: Cr
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Tr
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mr3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.

    Page 1289 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Mr2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Vr2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Vr3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".
    Page 1290 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1291 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - Chinese 2010
    Page 1292 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Page 1293 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MueMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.

    Page 1294 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MueMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: BetaMMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the equivalent moment.It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: BetaMMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the equivalent moment.It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1295 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BetaTMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in determining the equivalent moment.It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: BetaTMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in determining the equivalent moment.It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: PhiMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in the interaction equation.Specifying 0 means
    the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: PhiMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for minor axis bending, used in the interaction equation.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Page 1296 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiBMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in the interaction equation.Specifying 0 means
    the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: PhiBMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in the interaction equation.Specifying 0 means
    the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: GammaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in the interaction equation.Specifying 0 means
    the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: GammaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor for major axis bending, used in the interaction equation.Specifying 0 means
    the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1297 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DeltaMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DeltaMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: EtaSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor used in the interaction equation.Specifying 0 means the value is program
    determined.

    Field: EtaBC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor used in the calculation of beam/column capacity ratio.Specifying 0 means
    the value is program determined.

    Field: KLoRLimitC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio (Mue*L/r) limit for the member(s) with compressive axial load for both
    seismic and nonseismic load combinations.Specifying 0 means the value is program
    determined.

    Page 1298 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoRLimitT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio (L/r) limit for the member(s) with tensile axial load for both seismic and
    nonseismic load combinations.Specifying 0 means the value is program determined.

    Field: F
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable normal stress.Specifying 0 means the value is program determined.

    Field: Fv
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable shear stress.Specifying 0 means the value is program determined.

    Field: SeisMag
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Specifying 0 means the value is program determined.Program determined value means it
    is taken from the code specified table.Program determined value means it is calculated for
    each element uniquely.

    Field: DualMag
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Dual system seismic magnification factor to ensure at least 25% base shear is carried by
    the steel frame.This item is taken as 1 by default.It is not calculated.Specifying 0 means
    the value is program default which is 1.

    Field: FictShear
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether fictitious shear should be considered in design.This is
    either"Ratio", "Absolute", or "Both".

    Page 1299 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TransCol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether this column has to be considered as part of the "Transfer
    Frame".This is either"No" or "Yes". Program determined value means default value which
    is "No".

    Field: RolledSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the design section has to be considered as "Rolled" or
    "Welded".This is either"No" or "Yes".

    Field: GasCut
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the design section has to be considered as "Gascut".This is
    either"No" or "Yes".

    Field: BothPinned
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether this member has to be considered as "Pin-connected".This is
    either"No" or "Yes".

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Page 1300 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1301 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - CISC 95

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1302 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Page 1303 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    Page 1304 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Omega1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Omega1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Omega2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: U1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    Page 1305 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: U1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: U2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: U2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1306 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cr
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Tr
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mr3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Mr2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Vr2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    Page 1307 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Vr3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Page 1308 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Page 1309 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - EUROCODE 3-1993

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Page 1310 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1311 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1312 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: KMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: KMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: C1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: KLT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1313 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NoSwayFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: PsiMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: PsiMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Nc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Page 1314 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Nt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mc3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Mc2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Mb
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable critical moment capacity for major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1315 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: V3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.
    Page 1316 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.
    Page 1317 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - Eurocode 3-2005

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.
    Page 1318 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1319 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XLLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for lateral-torsional buckling for the frame object.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.

    Field: K1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: K1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    Page 1320 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: K2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: K2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for lateral-torsional buckling. This item is specified as a fraction of
    the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is taken as 1 by default. This should be set by the user.

    Page 1321 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kyyMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: kzzMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: C1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: kzy
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: kyz
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Page 1322 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SectClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Section class to be used. This is either "Class 1", "Class 2", "Class 3", or "Class 4". It
    determines the capacity of the sections and the interaction equations to be used. If not
    overwritten, it is calculated based on the Table 5.2 of the code, "EN 1993-1-1:2005.".

    Field: Rolled
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the design section has to be considered as "Rolled" or
    "Welded".This is either"No" or "Yes".

    Field: DCLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.Program determined value means it is taken from the
    steel preferences.Specifying 0 means the value is program determined.

    Field: CurveYY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Column buckling curve to be used. This is either "a0", "a", "b", "c", or "d". It determines
    the imperfection factors for buckling curve. If not overwritten, it is taken from the Table
    6.2 of the code, "EN 1993-1-1:2005.".

    Field: CurveZZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Column buckling curve to be used. This is either "a0", "a", "b", "c", or "d". It determines
    the imperfection factors for buckling curve. If not overwritten, it is taken from the Table
    6.2 of the code, "EN 1993-1-1:2005.".

    Page 1323 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CurveLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Buckling curve to be used for lateral-torsional buckling. This is either "a0", "a", "b", "c",
    or "d". The program gives one extra option "a0" following flexural buckling mode. It
    determines the imperfection factors for buckling curve. If not overwritten, it is taken from
    the Table 6.4 of the code, "EN 1993-1-1:2005.".

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the System Overstrength Factor. Omega factor is related to seismic factored
    member force and member capacity. It can assume different values in two orthogonal
    directions. The Omega value specified here is solely used for design. The program uses
    the same value for all directions. See EC8 sections 6.6.3(1), 6.7.4(1), 6.8.3(1), and
    6.8.4(1) for details. Specifying 0 means the value is program determined.Program
    determined value means it is taken from the preferences.

    Field: GammaOV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the expected yield strength to the minimum specified yield strength. This
    ratio is used in capacity based design for special seismic cases. See EC8 sections 6.1.3(2),
    6.2(3), 6.5.5(3), 6.6.3(1), 6.7.4(1), 6.8.3(1), and 6.8.4(1) for details. Specifying 0 means
    the value is program determined.

    Field: Nc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Nt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Page 1324 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mc3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Mc2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Mb
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable critical moment capacity for major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: V2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 1325 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Page 1326 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Page 1327 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - Indian IS 800:2007

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Page 1328 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1329 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1330 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: KMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: KMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: C1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: kzy
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: kyz
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Page 1331 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the System Overstrength Factor. Omega factor is related to seismic factored
    member force and member capacity. It can assume different values in two orthogonal
    directions. The Omega value specified here is solely used for design. The program uses
    the same value for all directions. See EC8 sections 6.6.3(1), 6.7.4(1), 6.8.3(1), and
    6.8.4(1) for details. Specifying 0 means the value is program determined.Program
    determined value means it is taken from the preferences.

    Field: GammaOV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the expected yield strength to the minimum specified yield strength. This
    ratio is used in capacity based design for special seismic cases. See EC8 sections 6.1.3(2),
    6.2(3), 6.5.5(3), 6.6.3(1), 6.7.4(1), 6.8.3(1), and 6.8.4(1) for details. Specifying 0 means
    the value is program determined.

    Field: Nc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Nt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mc3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1332 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mc2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Mb
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable critical moment capacity for major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: V2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: V3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 1333 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1334 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.
    Page 1335 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - Indian IS:800-1998

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Page 1336 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1337 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for lateral-torsional buckling for the frame object.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for lateral-torsional buckling. This item is specified as a fraction of
    the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is taken as 1 by default. This should be set by the user.
    Page 1338 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: SigmaAC
    Field is Imported: Yes
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Allowable axial compressive stress. Specifying 0 means the value is program determined.

    Field: SigmaAT
    Field is Imported: Yes
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Allowable axial tensile stress. Specifying 0 means the value is program determined.

    Field: SigmaBC33
    Field is Imported: Yes
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Allowable bending stress in major axis bending. Specifying 0 means the value is program
    determined.

    Page 1339 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: SigmaBC22
    Field is Imported: Yes
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Allowable shear stress for minor direction shear. Specifying 0 means the value is program
    determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: TauVA2
    Field is Imported: Yes
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Allowable shear stress for major direction shear. Specifying 0 means the value is program
    determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: TauVA3
    Field is Imported: Yes
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Allowable shear stress for minor direction shear. Specifying 0 means the value is program
    determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: TauVM
    Field is Imported: Yes
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Allowable maximum shear stress. Specifying 0 means the value is program determined.
    Page 1340 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SigmaE
    Field is Imported: Yes
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Allowable equivalent stress. Specifying 0 means the value is program determined.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Page 1341 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Page 1342 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - Italian NTC 2008

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Page 1343 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame

    Page 1344 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XLLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for lateral-torsional buckling for the frame object.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.

    Field: K1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: K1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1345 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: K2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: K2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for lateral-torsional buckling. This item is specified as a fraction of
    the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is taken as 1 by default. This should be set by the user.

    Field: kyyMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.

    Page 1346 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: kzzMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: C1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: kzy
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: kyz
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: SectClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Section class to be used. This is either "Class 1", "Class 2", "Class 3", or "Class 4". It
    determines the capacity of the sections and the interaction equations to be used. If not
    overwritten, it is calculated based on the Table 5.2 of the code, "EN 1993-1-1:2005.".

    Page 1347 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Rolled
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the design section has to be considered as "Rolled" or
    "Welded".This is either"No" or "Yes".

    Field: DCLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.Program determined value means it is taken from the
    steel preferences.Specifying 0 means the value is program determined.

    Field: CurveYY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Column buckling curve to be used. This is either "a0", "a", "b", "c", or "d". It determines
    the imperfection factors for buckling curve. If not overwritten, it is taken from the Table
    6.2 of the code, "EN 1993-1-1:2005.".

    Field: CurveZZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Column buckling curve to be used. This is either "a0", "a", "b", "c", or "d". It determines
    the imperfection factors for buckling curve. If not overwritten, it is taken from the Table
    6.2 of the code, "EN 1993-1-1:2005.".

    Field: CurveLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Buckling curve to be used for lateral-torsional buckling. This is either "a0", "a", "b", "c",
    or "d". The program gives one extra option "a0" following flexural buckling mode. It
    determines the imperfection factors for buckling curve. If not overwritten, it is taken from
    the Table 6.4 of the code, "EN 1993-1-1:2005.".

    Page 1348 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the System Overstrength Factor. Omega factor is related to seismic factored
    member force and member capacity. It can assume different values in two orthogonal
    directions. The Omega value specified here is solely used for design. The program uses
    the same value for all directions. See EC8 sections 6.6.3(1), 6.7.4(1), 6.8.3(1), and
    6.8.4(1) for details. Specifying 0 means the value is program determined.Program
    determined value means it is taken from the preferences.

    Field: GammaOV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the expected yield strength to the minimum specified yield strength. This
    ratio is used in capacity based design for special seismic cases. See EC8 sections 6.1.3(2),
    6.2(3), 6.5.5(3), 6.6.3(1), 6.7.4(1), 6.8.3(1), and 6.8.4(1) for details. Specifying 0 means
    the value is program determined.

    Field: Nc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Nt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mc3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1349 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mc2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Mb
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable critical moment capacity for major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: V2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: V3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 1350 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1351 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.
    Page 1352 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - Italian UNI 10011

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Page 1353 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1354 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for lateral-torsional buckling for the frame object.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.

    Field: K1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: K1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: K2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    Page 1355 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: K2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for lateral-torsional buckling. This item is specified as a fraction of
    the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is taken as 1 by default. This should be set by the user.

    Field: kyyMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1356 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kzzMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: C1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: kzy
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: kyz
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: SectClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Section class to be used. This is either "Class 1", "Class 2", "Class 3", or "Class 4". It
    determines the capacity of the sections and the interaction equations to be used. If not
    overwritten, it is calculated based on the Table 5.2 of the code, "EN 1993-1-1:2005.".

    Page 1357 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Rolled
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the design section has to be considered as "Rolled" or
    "Welded".This is either"No" or "Yes".

    Field: DCLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.Program determined value means it is taken from the
    steel preferences.Specifying 0 means the value is program determined.

    Field: CurveYY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Column buckling curve to be used. This is either "a0", "a", "b", "c", or "d". It determines
    the imperfection factors for buckling curve. If not overwritten, it is taken from the Table
    6.2 of the code, "EN 1993-1-1:2005.".

    Field: CurveZZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Column buckling curve to be used. This is either "a0", "a", "b", "c", or "d". It determines
    the imperfection factors for buckling curve. If not overwritten, it is taken from the Table
    6.2 of the code, "EN 1993-1-1:2005.".

    Field: CurveLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Buckling curve to be used for lateral-torsional buckling. This is either "a0", "a", "b", "c",
    or "d". The program gives one extra option "a0" following flexural buckling mode. It
    determines the imperfection factors for buckling curve. If not overwritten, it is taken from
    the Table 6.4 of the code, "EN 1993-1-1:2005.".

    Page 1358 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the System Overstrength Factor. Omega factor is related to seismic factored
    member force and member capacity. It can assume different values in two orthogonal
    directions. The Omega value specified here is solely used for design. The program uses
    the same value for all directions. See EC8 sections 6.6.3(1), 6.7.4(1), 6.8.3(1), and
    6.8.4(1) for details. Specifying 0 means the value is program determined.Program
    determined value means it is taken from the preferences.

    Field: GammaOV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the expected yield strength to the minimum specified yield strength. This
    ratio is used in capacity based design for special seismic cases. See EC8 sections 6.1.3(2),
    6.2(3), 6.5.5(3), 6.6.3(1), 6.7.4(1), 6.8.3(1), and 6.8.4(1) for details. Specifying 0 means
    the value is program determined.

    Field: Nc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Nt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mc3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1359 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mc2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Mb
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable critical moment capacity for major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: V2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: V3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 1360 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1361 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.
    Page 1362 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - NZS 3404-1997

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Page 1363 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: SteelType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Hot Rolled", "Hot Finished", "Cold Formed", "Stress Relieved", "Lightly
    Welded", or "Heavily Welded" indicating the residual stress level in the structural section.
    This affects plasticity limit and yield limit of plate element slenderness values. Eventually
    this can affect moment capacity and axial compression capacity through modification on
    Ze and Aeff. "Hot Rolled" and "Hot Finished" are used synonymously in this program.
    "Cold Formed" is meant as cold-formed and not stress-relieved. "Stress Relieved" is
    meant as cold-formed and stress-relieved. Welded H and I sections are assumed to be
    fabricated from flame-cut plates. See sections 5.2.2, 6.2.4, 6.3.3, and Tables 5.2, 6.2.4,
    6.3.3(1), and 6.3.3(2) of "AS 4100:1998/NZS 3404:1997" code for details.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1364 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XLLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for lateral-torsional buckling for the frame object.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.

    Field: keMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: keMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis with an assumption
    that the frame is braced at the joints against sidesway. This item is specified as a fraction
    of the frame object length.Multiplying the frame object length with this factor gives the
    effective length for the object.Specifying 0 means the value is program determined.For
    Page 1365 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    beam design, this factor is always taken as 1 regardless of what may be specified in the
    overwrites.This factor is used for B1 factor.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: keSwayMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: keSwayMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ktLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Page 1366 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: krLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Lateral rotation restraint effective length factor for members subjected to flexure. It is
    unitless. It affects lateral-torsional buckling capacity, Mb by affecting Mo and alpha_s.
    Its value depends on lateral or rotational restraints. Specifying 0 means the value is
    program default. See section 5.6.3 and Table 5.6.3(3) of "AS 4100:1998/NZS 3404:1997"
    code for details.

    Field: klLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Load height effective length factor for members subjected to flexure. It is unitless. It
    affects lateral-torsional buckling capacity, Mb by affecting Mo and alpha_s. Its value
    depends on lateral or rotational restraints and load height position. Specifying 0 means the
    value is program default. See section 5.6.3 and Table 5.6.3(2) of "AS 4100:1998/NZS
    3404:1997" code for details.

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1367 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Alpham
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Moment modification factor for distribution of bending moments in a member subjected to
    flexure. It is unitless. It captures the effect of non-uniform moment distribution along the
    length.Program determined value means it is calculated for each element for each load
    combination uniquely.Specifying 0 means the value is program determined.See sections
    5.6.1.1 and 5.6.2 and Tables 5.6.1 and 5.6.2 of "AS 4100:1998/NZS 3404:1997" code for
    details.

    Field: Alphas
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Slenderness reduction factor for a member subjected to flexure. It is unitless. Program
    determined value means it is calculated for each element for each load combination
    uniquely.Specifying 0 means the value is program determined.See section 5.6.1.1 "AS
    4100:1998/NZS 3404:1997" code for details.

    Field: Kf
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Form factor for members subjected to axial compression. It is unitless. Its value is 1 for
    compact sections and less than one for non-compact and slender sections. Specifying 0
    means the value is program determined.See sections 6.2.1, 6.3.3, 8.3.2, 8.4.2.2, and 8.4.4.1
    of "AS 4100:1998/NZS 3404:1997" code for details.

    Field: KtAxial
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Correction factor for distribution of forces for members subjected to axial tension. It is
    unitless. Its value depends on the connections and can be less than or equal to one for any
    sections. Specifying 0 means the value is program default which is 1.See sections 7.2,
    7.3.1, and 7.3.2 and Table 7.3.2 of "AS 4100:1998/NZS 3404:1997" code for details.

    Field: DbMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    Page 1368 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DbMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: DsMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: DsMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1369 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ns
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: Nt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Ms3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Ms2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Mb
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable critical moment capacity for major axis bending. Specifying 0 means the value
    is program determined.

    Page 1370 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Vv2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Vv3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Page 1371 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1372 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.

    Field: DCLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.Program determined value means it is taken from the
    steel preferences.Specifying 0 means the value is program determined.
    Page 1373 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Overwrites - Steel Design - Norsok N-004

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Page 1374 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.

    Page 1375 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: KMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1376 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: C1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: kzy
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: kyz
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    .

    Field: PresEqual
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether pipe's internal fluid pressure is equalized with the outer fluid
    pressure. This is either"No" or "Yes".

    Field: ExtPres
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Additional external pressure added to any wave load pressure and used in the
    design/check. Its value can be positive or negative. Positive generates hoop compression
    and negative generates hoop tension.

    Field: Nc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Page 1377 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Nt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: Mc3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Mc2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Mb
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable critical moment capacity for major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1378 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: V3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.
    Page 1379 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.
    Page 1380 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - UBC97-ASD

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.
    Page 1381 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1382 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1383 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: Omega0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Omega0 factor related to seismic force and ductility. Specifying 0 means the value is
    program determined.Program determined value means it is taken from the seismic load
    definition or general preferences.

    Page 1384 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fa
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable axial compressive stress. Specifying 0 means the value is program determined.

    Field: Ft
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable axial tensile stress. Specifying 0 means the value is program determined.

    Field: Fb3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable bending stress in major axis bending. Specifying 0 means the value is program
    determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Fb2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable bending stress in minor axis bending. Specifying 0 means the value is program
    determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fv2
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable shear stress for major direction shear. Specifying 0 means the value is program
    determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major

    Page 1385 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: Fv3
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Allowable shear stress for minor direction shear. Specifying 0 means the value is program
    determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Page 1386 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Page 1387 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Overwrites - Steel Design - UBC97-LRFD

    Field: Frame
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design section for the selected frame objects.When this overwrite is applied, any
    previous auto select section assigned to the frame object is removed.Program determined
    value means it is taken from the analysis section.

    Page 1388 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.Program determined value means it is taken
    from the steel preferences.

    Field: Fy
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Material yield strength used in the design/check.Specifying 0 means the value is program
    determined.The program determined value is taken from the material property assigned to
    the frame object.

    Field: RLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load reduction factor.A reducible live load is multiplied by this factor to obtain
    the reduced live load for the frame object.Specifying 0 means the value is program
    determined.

    Field: AreaRatio
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The ratio of the net area at the design section to gross cross-sectional area of the
    section.This ratio affects the design of axial tension members.Specifying 0 means the
    value is program default which is 1.

    Field: XLMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1389 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XLMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying this factor times the frame
    object length gives the unbraced length for the object.Specifying 0 means the value is
    program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: XKMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object major axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: XKMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis.This item is
    specified as a fraction of the frame object length.Multiplying the frame object length with
    this factor gives the effective length for the object.Specifying 0 means the value is
    program determined.For beam design, this factor is always taken as 1 regardless of what
    may be specified in the overwrites.This factor is used for axial compression capacity.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1390 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmMajor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for major axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMinor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm for minor axis bending, used in determining the interaction ratio. It
    captures the effect of non-uniform moment distribution along the length.Specifying 0
    means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Cb
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending capacity. It captures the
    effect of non-uniform moment distribution along the length.Specifying 0 means the value
    is program determined.

    Field: B1Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway major axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1391 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: B1Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for non-sway minor axis bending
    moment.Specifying 0 means the value is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: B2Major
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway major-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: B2Minor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Unitless moment magnification factor for sway minor-axis bending moment. Specifying 0
    means the value is program determined.The program determined value is taken as 1
    because it is assumed that P-Delta effects were specified to be included in the analysis,
    and thus no further magnification is required.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Omega0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Omega0 factor related to seismic force and ductility. Specifying 0 means the value is
    program determined.Program determined value means it is taken from the seismic load
    definition or general preferences.

    Page 1392 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiPnc
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial compressive capacity. Specifying 0 means the value is program
    determined.

    Field: PhiPnt
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable axial tensile capacity. Specifying 0 means the value is program determined.

    Field: PhiMn3
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in major axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections major bending is bending about the local 3-axis.For
    unsymmetrical sections (e.g., angles)major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: PhiMn2
    Field is Imported: Yes
    Format: Moment (Forces section of form)
    Units: Force-Length
    Allowable bending moment capacity in minor axis bending. Specifying 0 means the value
    is program determined.
    For symmetrical sections minor bending is bending about the local 2-axis.For
    unsymmetrical sections (e.g., angles)minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: PhiVn2
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for major direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections major shear is shear in the local 2-axis direction.For
    unsymmetrical sections (e.g., angles)major shear is the shear associated with major
    Page 1393 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    bending.Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: PhiVn3
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    Allowable shear capacity force for minor direction shear. Specifying 0 means the value is
    program determined.
    For symmetrical sections minor shear is shear in the local 3-axis direction.For
    unsymmetrical sections (e.g., angles)minor shear is the shear associated with minor
    bending.Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DeflType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider deflection limitations as absolute or as divisor of beam length
    (relative).This is either"Ratio", "Absolute", or "Both".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Page 1394 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: DLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for dead load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: SDLAndLLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed dead plus live load.It is unit dependent.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: LLAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for superimposed live load.It is unit dependent.Inputting zero is
    special, since it means no check has to be made for this item.

    Page 1395 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Deflection limitation for total load.It is unit dependent.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: NetAbs
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.It is unit dependent.Inputting zero is special, since it means no check has to
    be made for this item.

    Field: SpecCamber
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The specified amount of camber to be reported in the design output and to be used in the
    net deflection check.It is unit dependent.
    Table: Preferences - Aluminum Design - AA-ASD 2000

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Page 1396 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame.This item is used for
    ductility considerations in the design.

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. Currently this option is not available.

    Field: LatFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The allowable stress increase factor for loading combinations that include wind or seismic
    loads. This item is only used when the Use Lateral Factor item is set to Yes.

    Field: UseLatFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the specified Lateral Factor is to be used in the design. Otherwise it is
    No.

    Field: Bridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the structure is a bridge-type structure. It is no if the structure is some
    other type of structure such as a building-type structure.
    Table: Preferences - Aluminum Design - AA-LRFD 2000

    Page 1397 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame.This item is used for
    ductility considerations in the design.

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. Currently this option is not available.

    Page 1398 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor applicable to limit states of general yield.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor applicable to limit states of beams or elements of beams.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor applicable to limit states of elements of columns.

    Field: PhiU
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor applicable to limit states of ultimate strength.

    Field: PhiCC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor applicable to limit states of columns.

    Field: PhiCP
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor applicable to limit states of elastic buckling of tubes.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor applicable to limit states of elastic shear buckling.

    Page 1399 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiVP
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor applicable to limit states of inelastic shear buckling.

    Field: PhiW
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor applicable to limit states of web crippling.
    Table: Preferences - Cold Formed Design - AISI-ASD96

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame.This item is used for
    ductility considerations in the design.

    Page 1400 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. Currently this option is not available.

    Field: OmegaBS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The factor of safety Omega for bending of sections with stiffened or partially stiffened
    compression flange.

    Field: OmegaBUS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The factor of safety Omega for bending of sections with unstiffened compression flange.

    Field: OmegaBLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The factor of safety Omega for bending of sections under lateral-torsional buckling mode.

    Field: OmegaVS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The factor of safety Omega for shear of sections with slender web.

    Page 1401 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OmegaVNS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The factor of safety Omega for shear of sections with slender web.

    Field: OmegaT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The factor of safety Omega for tension.

    Field: OmegaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The factor of safety Omega for compression.
    Table: Preferences - Cold Formed Design - AISI-LRFD96

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Page 1402 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame.This item is used for
    ductility considerations in the design.

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. Currently this option is not available.

    Field: PhiBS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi for bending of sections with stiffened or partially stiffened
    compression flange.

    Field: PhiBUS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi for bending of sections with unstiffened compression flange.

    Field: PhiBLTB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi for bending of sections under lateral-torsional buckling mode.

    Page 1403 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiVS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi for shear of sections with slender web.

    Field: PhiVNS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi for shear of sections with nonslender web.

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi for tension.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi for compression.
    Table: Preferences - Concrete Design - AASHTO Concrete 07

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .
    Page 1404 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: Zone
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The seismic zone. This is either "Zone 0", "Zone 1", "Zone 2", "Zone 3" or "Zone 4".
    Table: Preferences - Concrete Design - ACI 318-02

    Page 1405 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Page 1406 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: SeisCat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Seismic Design Category. This is either "A", "B", "C", "D", "E" or "F".

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for tension controlled sections.

    Field: PhiCTied
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for compression controlled sections with tied reinforcement.

    Field: PhiCSpiral
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for compression controlled sections with spiral
    reinforcement.

    Page 1407 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear and torsion.

    Field: PhiVSeismic
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear in structures that rely on special moment resisting
    frames or special reinforced concrete structural walls to resist earthquake effects.

    Field: PhiVJoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for joint shear in structures that rely on special moment
    resisting frames or special reinforced concrete structural walls to resist earthquake effects.
    Table: Preferences - Concrete Design - ACI 318-05/IBC2003

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Page 1408 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: SeisCat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Seismic Design Category. This is either "A", "B", "C", "D", "E" or "F".

    Page 1409 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for tension controlled sections.

    Field: PhiCTied
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for compression controlled sections with tied reinforcement.

    Field: PhiCSpiral
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for compression controlled sections with spiral
    reinforcement.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear and torsion.

    Field: PhiVSeismic
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear in structures that rely on special moment resisting
    frames or special reinforced concrete structural walls to resist earthquake effects.

    Field: PhiVJoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for joint shear in structures that rely on special moment
    resisting frames or special reinforced concrete structural walls to resist earthquake effects.
    Table: Preferences - Concrete Design - ACI 318-08/IBC2009

    Page 1410 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Page 1411 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: SeisCat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Seismic Design Category. This is either "A", "B", "C", "D", "E" or "F".

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for tension controlled sections.

    Field: PhiCTied
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for compression controlled sections with tied reinforcement.

    Field: PhiCSpiral
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for compression controlled sections with spiral
    reinforcement.

    Page 1412 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear and torsion.

    Field: PhiVSeismic
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear in structures that rely on special moment resisting
    frames or special reinforced concrete structural walls to resist earthquake effects.

    Field: PhiVJoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for joint shear in structures that rely on special moment
    resisting frames or special reinforced concrete structural walls to resist earthquake effects.
    Table: Preferences - Concrete Design - ACI 318-11

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Page 1413 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: SeisCat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Seismic Design Category. This is either "A", "B", "C", "D", "E" or "F".

    Page 1414 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for tension controlled sections.

    Field: PhiCTied
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for compression controlled sections with tied reinforcement.

    Field: PhiCSpiral
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for compression controlled sections with spiral
    reinforcement.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear and torsion.

    Field: PhiVSeismic
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear in structures that rely on special moment resisting
    frames or special reinforced concrete structural walls to resist earthquake effects.

    Field: PhiVJoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for joint shear in structures that rely on special moment
    resisting frames or special reinforced concrete structural walls to resist earthquake effects.
    Table: Preferences - Concrete Design - ACI 318-99

    Page 1415 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Page 1416 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for bending and tension.

    Field: PhiCTied
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for axial compression when the member has tie
    reinforcement.

    Field: PhiCSpiral
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for axial compression when the member has spiral
    reinforcement.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear.
    Table: Preferences - Concrete Design - AS 3600-09

    Page 1417 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Page 1418 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for tension controlled sections.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for compression controlled sections with tied reinforcement.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear and torsion.

    Field: PhiVSeismic
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear in structures that rely on special moment resisting
    frames or special reinforced concrete structural walls to resist earthquake effects.

    Page 1419 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiVJoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for joint shear in structures that rely on special moment
    resisting frames or special reinforced concrete structural walls to resist earthquake effects.
    Table: Preferences - Concrete Design - AS 3600-01

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Page 1420 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for tension controlled sections.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for compression controlled sections with tied reinforcement.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear and torsion.

    Page 1421 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiVSeismic
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear in structures that rely on special moment resisting
    frames or special reinforced concrete structural walls to resist earthquake effects.

    Field: PhiVJoint
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for joint shear in structures that rely on special moment
    resisting frames or special reinforced concrete structural walls to resist earthquake effects.
    Table: Preferences - Concrete Design - BS8110 89

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Page 1422 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.
    Table: Preferences - Concrete Design - BS8110 97

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Page 1423 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Page 1424 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GammaS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaS.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaC.

    Field: GammaM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for concrete in shear.
    Table: Preferences - Concrete Design - Chinese 2010

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Page 1425 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: StrucSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The structural system.This is either"Frame Only", "Shearwall Only", "Frame-Shearwall",
    "Frame-Core Tube", "Tube-in-Tube", "Flat Slab", "Frame Support Wall", "Steel Frame",
    "Steel Frame-Core", "Steel Frame-CBF", "Steel Frame-EBF", or "CompositeColumnCore". It affects the value of seismic magnification factors MMF, SMF, and AFMF.It also
    affects the limiting value of maximum axial compression ratio, N/(fc*A).

    Page 1426 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TallBldg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the structure should be considered to be a tall building or a
    part of it.This is either"No" or "Yes". It affects the minimum rebar ratio to be provided in
    a column (JGJ3 6.4.3-1).It also affects the effective of rebar area in a column for a seismic
    load (JGJ3 6.4).

    Field: FieldType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The seismic field type.This is either"I", "II", "III", or "IV". It affects the minimum rebar
    ratio to be provided in a column (JGJ3 6.4.3-1).

    Field: SeisGrade
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The Seismic Class.This is either"Super I", "Grade I", "Grade II", "Grade III", "Grade IV",
    or "Non Seismic". It affects the seismic design of beams, columns, and joints (JGJ3 6.3.2,
    6.3.4, 6.4.2, 6.4.3, 7.2.6, GB50010 7.5.1, 7.5.16, 7.6.1, 11.3.9, 11.4.8, 11.4.17).It also
    affects the value of seismic magnification factors MMF, SMF, and AFMF.

    Field: ImpFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Gamma0 factor that is related to seismic force amplification.

    Field: ColDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Appendix F or Simplified indicating how column design are considered in
    the design. Appendix F refers to design or checking through the detailed calculation using
    interaction surface. Simplified refers to design or checking using code specified
    approximate methods. The latter method is applicable to certain classes of problems. If the
    Simplified method is specified and the problem class does not fit for the method, then
    Appendix F is used anyway.
    Table: Preferences - Concrete Design - CSA-A233-04

    Page 1427 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Page 1428 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for steel.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for concrete.
    Table: Preferences - Concrete Design - CSA-A233-94

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.

    Page 1429 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Page 1430 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for steel.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for concrete.
    Table: Preferences - Concrete Design - EUROCODE 2-1992

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Page 1431 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: Nu
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Nu (Greek letter) factor.

    Field: GammaS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaS.

    Page 1432 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaC.
    Table: Preferences - Concrete Design - Eurocode 2-2004

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Page 1433 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: Country
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Country specific implementation considering country National Annex. CEN Default is the
    general version without an annex.

    Field: CombosEq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Design code combinations to consider. These are either generated from Eq. 6.10 or from
    both Eqs. 6.10a and 6.10b.

    Field: RelClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Reliabilty class which defines a scale factor for load combinations. This is currently only
    used for Denmark, Finland, and Sweden.

    Page 1434 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SOM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Second order method to be used. This is either Nominal Stiffness, Nominal Curvature, or
    None. If None is chosen, no second order moments are computed.

    Field: Theta0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Theta0 is the inclination angle for imperfections, defined as a ratio.

    Field: GammaS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    GammaS is the partial safety factor for steel.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    GammaC is the partial safety factor for concrete.

    Field: AlphaCC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    AlphaCC is the material coefficient taking account of long term effects on the concrete
    compressive strength and unfavourable effects from the load application.

    Field: AlphaCT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    AlphaCT is the material coefficient taking account of long term effects on the concrete
    tensile strength and unfavourable effects from the load application.

    Page 1435 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaLCC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    AlphaLCC is the lightweight material coefficient taking account of long term effects on
    the concrete compressive strength and unfavourable effects from the load application.

    Field: AlphaLCT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    AlphaLCT is the lightweight material coefficient taking account of long term effects on
    the concrete tensile strength and unfavourable effects from the load application.
    Table: Preferences - Concrete Design - Hong Kong CP 2013

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Page 1436 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: GammaS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaS.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaC.

    Page 1437 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GammaM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for concrete in shear.
    Table: Preferences - Concrete Design - Hong Kong CP 2004

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Page 1438 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: GammaS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaS.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaC.

    Field: GammaM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for concrete in shear.
    Table: Preferences - Concrete Design - Indian IS 456-2000

    Page 1439 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Page 1440 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: GammaS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaS.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaC.
    Table: Preferences - Concrete Design - Italian NTC 2008

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.

    Page 1441 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Page 1442 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CombosEq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Design code combinations to consider. These are either generated from Eq. 6.10 or from
    both Eqs. 6.10a and 6.10b.

    Field: RelClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Reliabilty class which defines a scale factor for load combinations. This is currently only
    used for Denmark, Finland, and Sweden.

    Field: SOM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Second order method to be used. This is either Nominal Stiffness, Nominal Curvature, or
    None. If None is chosen, no second order moments are computed.

    Field: Theta0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Theta0 is the inclination angle for imperfections, defined as a ratio.

    Field: GammaS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    GammaS is the partial safety factor for steel.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    GammaC is the partial safety factor for concrete.

    Page 1443 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaCC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    AlphaCC is the material coefficient taking account of long term effects on the concrete
    compressive strength and unfavourable effects from the load application.

    Field: AlphaCT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    AlphaCT is the material coefficient taking account of long term effects on the concrete
    tensile strength and unfavourable effects from the load application.

    Field: AlphaLCC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    AlphaLCC is the lightweight material coefficient taking account of long term effects on
    the concrete compressive strength and unfavourable effects from the load application.

    Field: AlphaLCT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    AlphaLCT is the lightweight material coefficient taking account of long term effects on
    the concrete tensile strength and unfavourable effects from the load application.
    Table: Preferences - Concrete Design - Italian DM 14-2-92

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.

    Page 1444 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.
    Table: Preferences - Concrete Design - KCI-1999

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.

    Page 1445 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Page 1446 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for bending and tension.

    Field: PhiCTied
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for axial compression when the member has tie
    reinforcement.

    Field: PhiCSpiral
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for axial compression when the member has spiral
    reinforcement.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear.
    Table: Preferences - Concrete Design - Mexican RCDF 2004

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    Page 1447 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Page 1448 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for bending.

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for tension.

    Field: PhiCTied
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for axial compression when the member has tie
    reinforcement.

    Field: PhiCSpiral
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for axial compression when the member has spiral
    reinforcement.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear.
    Table: Preferences - Concrete Design - Mexican RCDF 2001

    Page 1449 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Page 1450 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for bending.

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for tension.

    Field: PhiCTied
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for axial compression when the member has tie
    reinforcement.

    Field: PhiCSpiral
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for axial compression when the member has spiral
    reinforcement.

    Page 1451 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear.
    Table: Preferences - Concrete Design - NZS 3101-06

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Page 1452 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for bending.

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for tension.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for axial compression.

    Page 1453 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear.

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Amplification factor.

    Field: PhiZero
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Phi_0 factor.

    Field: Rm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Rm factor to be used in shear design.

    Field: Rv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Rv factor to be used in shear design.
    Table: Preferences - Concrete Design - NZS 3101-95

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    Page 1454 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Page 1455 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for bending.

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for tension.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for axial compression.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear.

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Amplification factor.

    Field: PhiZero
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Phi_0 factor.

    Field: Rm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Rm factor to be used in shear design.

    Page 1456 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Rv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Rv factor to be used in shear design.
    Table: Preferences - Concrete Design - Singapore CP 65-99

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Page 1457 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: GammaS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaS.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaC.

    Field: GammaM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for concrete in shear.
    Table: Preferences - Concrete Design - TS 500-2000

    Page 1458 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Page 1459 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: GammaS
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaS.

    Field: GammaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor GammaC.

    Field: GammaM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for concrete in shear.
    Table: Preferences - Concrete Design - UBC97

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design.
    - Envelope - considers enveloping values for Time History and Multi-step static and last
    step values for Nonlinear static.

    Page 1460 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: NumCurves
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of two-dimensional interaction curves used to make up the threedimensionalinteraction surface. This item must be greater than or equal to 4 and divisible
    by 4.

    Field: NumPoints
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of points used to define a two-dimensional interaction curve.This item must
    be greater than or equal to 5 and odd.

    Field: MinEccen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether minimum eccentricity should be considered in design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Page 1461 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UFLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit to be used for acceptability.Stress ratios that are less than or equal to
    this value are considered acceptable.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for bending and tension.

    Field: PhiCTied
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for axial compression when the member has tie
    reinforcement.

    Field: PhiCSpiral
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for axial compression when the member has spiral
    reinforcement.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor for shear.
    Table: Preferences - Dimensional

    Field: MergeTol
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The auto merge tolerance (length). This is the basic tolerance value in the model. For
    example, when a joint is drawn within this tolerance length of another joint, the drawn
    joint is merged into the existing joint.

    Page 1462 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FineGrid
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The plan fine grid spacing (length). When the fine grid snap option is activated this item
    sets the spacing of the snap grid.

    Field: Nudge
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The plan nudge value (length). When the plan nudge feature is used this item sets the
    distance that an item is nudged. In plan view you can nudge an object by selecting it and
    then pressing the Ctrl key and an arrow key simultaneously.

    Field: SelectTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The screen selection tolerance (pixels). When clicking to select an object your mouse
    pointer must be within this number of pixels to select the object.

    Field: SnapTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The screen snap tolerance (pixels). When using the snap options and moving your mouse
    pointer about the model, your mouse pointer must be within this number of pixels to snap
    to the object.

    Field: SLineThick
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The screen line thickness (pixels). The thickness of lines drawn on the screen. This item
    does not affect text, the bounding plane line or the aerial view.

    Field: PLineThick
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The printer line thickness (pixels). The thickness of lines and fonts drawn to the printer.

    Page 1463 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxFont
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum graphic font size (points). The default font size is based on the average
    size of the objects in your model shown on the screen. As you zoom into your model the
    font size becomes proportionately larger. However, the font size is never made larger than
    the specified maximum graphic font size.

    Field: MinFont
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The minimum graphic font size (points). The default font size is based on the average size
    of the objects in your model shown on the screen. As you zoom out of your model the
    font size becomes proportionately smaller. However, the font size is never made smaller
    than the specified minimum graphic font size.

    Field: AutoZoom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The auto zoom step (percent). This is the size of the step used for the View menu > Zoom
    In One Step command and the View menu > Zoom Out One Step command. The
    magnification of all objects is increased or deceased by the specfied percentage.

    Field: ShrinkFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shrink factor (percentage). This item works with the object shrink toggle which is set
    using the View menu > Set Display Options command or using the Object Shrink Toggle
    toolbar button. When object shrinking is toggled on all objects in the model are shown
    this specified percentage of their actual length.

    Field: TextFileLen
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is the maximum number of characters that the program will write on a single line in
    the text file before using a line continuation character and moving on to the next line.
    Table: Preferences - Steel Design - AASHTO-LRFD-2007

    Page 1464 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Page 1465 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: SDC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"A", "B", "C", "D", "E", or "F". This is related to seismic design. This is a
    function of Occupancy Category and Sds or Sd1. See ASCE 7-05 section 11.6 for details.

    Field: SeisCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the seismic part of the code should be considered in design.
    This is either"No" or "Yes".

    Field: SeisLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the special seismic load combinations should be considered in
    design. This is either"No" or "Yes".

    Field: ImpFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is related to seismic design. This is a function of Occupancy Category. See ASCE 705 section 11.5.1 for details.

    Field: SystemRho
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the redundancy factor. It is related to seismic design. This is used in the
    default design combinations. The program uses the same value for all directions. See
    ASCE 7-05 section 12.3.4 for details.
    Page 1466 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SystemSds
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Design Spectral Acceleration Parameter. This is related to seismic
    design. See ASCE 7-05 section 11.4.4 and 11.4.5 for details.

    Field: SystemR
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Response Modification Factor. This is a function of Seismic Force
    Resisting System. The R values can be specified in the definition of Auto-Seismic Loads
    for load calculation. It can assume different values for load calculation in two orthogonal
    directions. The R value specifid here is solely used for design. For design, the program
    uses the same value for all directions. See ASCE 7-05 section 12.2.1 and Table 12.2-1 for
    details.

    Field: SystemCd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Deflection Amplification Factor. This is a function of Seismic Force
    Resisting System. It can assume different values in two orthogonal directions. The Cd
    value specified here is solely used for design. The program uses the same value for all
    directions. See ASCE 7-05 section 12.2.1 and Table 12.2-1 for details.

    Field: Omega0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the System Overstrength Factor. This is a function of Seismic Force
    Resisting System. It can assume different values in two orthogonal directions. The
    Omega0 value specified here is solely used for design. The program uses the same value
    for all directions. See ASCE 7-05 section 12.2.1 and Table 12.2-1 for details.

    Field: Provision
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"LRFD" or "ASD" indicating the provision used to check/design the steel
    members.

    Page 1467 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Direct Analysis", "Effective Length", or "Limited 1st Order" indicating the
    analysis method used to check/design the steel members. The design module does not
    verify the acceptability of the selected analysis method. The user is expected to verify the
    acceptability of the selected method based on the decesion parameters table created after
    design. The program sets the appropriate stiffness modification factors for the selected
    analysis method. The user is expected to set the appropriate notional loads.

    Field: SOMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"General 2nd Order" or "Amplified 1st Order" indicating the second order
    method used to analyze the structure. The design module does not verify the acceptability
    of the selected method. The user is expected to verify the acceptability of the selected
    method.

    Field: SRMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Tau-b Variable", "Tau-b Fixed", or "No Modification" indicating the
    stiffness reduction method used to analyze the structure. The design module does not
    verify the acceptability of the selected method. The user is expected to verify the
    acceptability of the selected method. The program sets the appropriate stiffness
    modification factors for the selected analysis method. The user is expected to set the
    appropriate notional loads for the stiffness reduction method selected.

    Field: NLCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Notional load coefficient which is used to define the notional load as a fraction of a given
    gravity load case. This is for future use. It is not currently active.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Page 1468 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiTY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiTF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiVRolledI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiVT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: OmegaB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Page 1469 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OmegaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaTY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaTF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaVRolledI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaVT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: PlugWeld
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the doubler-plate should be considered to be plug-welded.
    This is either"No" or "Yes".
    Page 1470 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HSSWelding
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"ERW" or "SAW" indicating the procedure used for welding.

    Field: HSSReduceT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the reduction of HSS (box or Pipe) thickness should be
    considered. This is either"No" or "Yes".

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Page 1471 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - AISC 360-10

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Page 1472 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: SDC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"A", "B", "C", "D", "E", or "F". This is related to seismic design. This is a
    function of Occupancy Category and Sds or Sd1. See ASCE 7-05 section 11.6 for details.

    Field: SeisCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the seismic part of the code should be considered in design.
    This is either"No" or "Yes".

    Field: SeisLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the special seismic load combinations should be considered in
    design. This is either"No" or "Yes".

    Page 1473 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ImpFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is related to seismic design. This is a function of Occupancy Category. See ASCE 705 section 11.5.1 for details.

    Field: SystemRho
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the redundancy factor. It is related to seismic design. This is used in the
    default design combinations. The program uses the same value for all directions. See
    ASCE 7-05 section 12.3.4 for details.

    Field: SystemSds
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Design Spectral Acceleration Parameter. This is related to seismic
    design. See ASCE 7-05 section 11.4.4 and 11.4.5 for details.

    Field: SystemR
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Response Modification Factor. This is a function of Seismic Force
    Resisting System. The R values can be specified in the definition of Auto-Seismic Loads
    for load calculation. It can assume different values for load calculation in two orthogonal
    directions. The R value specifid here is solely used for design. For design, the program
    uses the same value for all directions. See ASCE 7-05 section 12.2.1 and Table 12.2-1 for
    details.

    Field: SystemCd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Deflection Amplification Factor. This is a function of Seismic Force
    Resisting System. It can assume different values in two orthogonal directions. The Cd
    value specified here is solely used for design. The program uses the same value for all
    directions. See ASCE 7-05 section 12.2.1 and Table 12.2-1 for details.

    Page 1474 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Omega0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the System Overstrength Factor. This is a function of Seismic Force
    Resisting System. It can assume different values in two orthogonal directions. The
    Omega0 value specified here is solely used for design. The program uses the same value
    for all directions. See ASCE 7-05 section 12.2.1 and Table 12.2-1 for details.

    Field: Provision
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"LRFD" or "ASD" indicating the provision used to check/design the steel
    members.

    Field: AMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Direct Analysis", "Effective Length", or "Limited 1st Order" indicating the
    analysis method used to check/design the steel members. The design module does not
    verify the acceptability of the selected analysis method. The user is expected to verify the
    acceptability of the selected method based on the decesion parameters table created after
    design. The program sets the appropriate stiffness modification factors for the selected
    analysis method. The user is expected to set the appropriate notional loads.

    Field: SOMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"General 2nd Order" or "Amplified 1st Order" indicating the second order
    method used to analyze the structure. The design module does not verify the acceptability
    of the selected method. The user is expected to verify the acceptability of the selected
    method.

    Field: SRMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Tau-b Variable", "Tau-b Fixed", or "No Modification" indicating the
    stiffness reduction method used to analyze the structure. The design module does not
    verify the acceptability of the selected method. The user is expected to verify the
    acceptability of the selected method. The program sets the appropriate stiffness
    Page 1475 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    modification factors for the selected analysis method. The user is expected to set the
    appropriate notional loads for the stiffness reduction method selected.

    Field: NLCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Notional load coefficient which is used to define the notional load as a fraction of a given
    gravity load case. This is for future use. It is not currently active.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiTY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiTF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Page 1476 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiVRolledI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiVT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: OmegaB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaTY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaTF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Page 1477 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OmegaVRolledI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaVT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: PlugWeld
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the doubler-plate should be considered to be plug-welded.
    This is either"No" or "Yes".

    Field: HSSWelding
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"ERW" or "SAW" indicating the procedure used for welding.

    Field: HSSReduceT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the reduction of HSS (box or Pipe) thickness should be
    considered. This is either"No" or "Yes".

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Page 1478 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - AISC360-05-IBC2006

    Page 1479 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Page 1480 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: SDC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"A", "B", "C", "D", "E", or "F". This is related to seismic design. This is a
    function of Occupancy Category and Sds or Sd1. See ASCE 7-05 section 11.6 for details.

    Field: SeisCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the seismic part of the code should be considered in design.
    This is either"No" or "Yes".

    Field: SeisLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the special seismic load combinations should be considered in
    design. This is either"No" or "Yes".

    Field: ImpFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is related to seismic design. This is a function of Occupancy Category. See ASCE 705 section 11.5.1 for details.

    Field: SystemRho
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the redundancy factor. It is related to seismic design. This is used in the
    default design combinations. The program uses the same value for all directions. See
    ASCE 7-05 section 12.3.4 for details.
    Page 1481 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SystemSds
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Design Spectral Acceleration Parameter. This is related to seismic
    design. See ASCE 7-05 section 11.4.4 and 11.4.5 for details.

    Field: SystemR
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Response Modification Factor. This is a function of Seismic Force
    Resisting System. The R values can be specified in the definition of Auto-Seismic Loads
    for load calculation. It can assume different values for load calculation in two orthogonal
    directions. The R value specifid here is solely used for design. For design, the program
    uses the same value for all directions. See ASCE 7-05 section 12.2.1 and Table 12.2-1 for
    details.

    Field: SystemCd
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Deflection Amplification Factor. This is a function of Seismic Force
    Resisting System. It can assume different values in two orthogonal directions. The Cd
    value specified here is solely used for design. The program uses the same value for all
    directions. See ASCE 7-05 section 12.2.1 and Table 12.2-1 for details.

    Field: Omega0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the System Overstrength Factor. This is a function of Seismic Force
    Resisting System. It can assume different values in two orthogonal directions. The
    Omega0 value specified here is solely used for design. The program uses the same value
    for all directions. See ASCE 7-05 section 12.2.1 and Table 12.2-1 for details.

    Field: Provision
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"LRFD" or "ASD" indicating the provision used to check/design the steel
    members.

    Page 1482 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Direct Analysis", "Effective Length", or "Limited 1st Order" indicating the
    analysis method used to check/design the steel members. The design module does not
    verify the acceptability of the selected analysis method. The user is expected to verify the
    acceptability of the selected method based on the decesion parameters table created after
    design. The program sets the appropriate stiffness modification factors for the selected
    analysis method. The user is expected to set the appropriate notional loads.

    Field: SOMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"General 2nd Order" or "Amplified 1st Order" indicating the second order
    method used to analyze the structure. The design module does not verify the acceptability
    of the selected method. The user is expected to verify the acceptability of the selected
    method.

    Field: SRMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Tau-b Variable", "Tau-b Fixed", or "No Modification" indicating the
    stiffness reduction method used to analyze the structure. The design module does not
    verify the acceptability of the selected method. The user is expected to verify the
    acceptability of the selected method. The program sets the appropriate stiffness
    modification factors for the selected analysis method. The user is expected to set the
    appropriate notional loads for the stiffness reduction method selected.

    Field: NLCoeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Notional load coefficient which is used to define the notional load as a fraction of a given
    gravity load case. This is for future use. It is not currently active.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Page 1483 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiTY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiTF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiVRolledI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: PhiVT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: OmegaB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Page 1484 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OmegaC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaTY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaTF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaVRolledI
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: OmegaVT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Safety factor.

    Field: PlugWeld
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the doubler-plate should be considered to be plug-welded.
    This is either"No" or "Yes".
    Page 1485 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: HSSWelding
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"ERW" or "SAW" indicating the procedure used for welding.

    Field: HSSReduceT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the reduction of HSS (box or Pipe) thickness should be
    considered. This is either"No" or "Yes".

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Page 1486 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - AISC-ASD01

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Page 1487 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: SeisCat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"A", "B", "C", "D", "E", or "F". This is related to seismic design. This is a
    function of Occupancy Category and Sds or Sd1. See ASCE 7-05 section 11.6 for details.

    Field: SeisCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the seismic part of the code should be considered in design.
    This is either"No" or "Yes".

    Field: SeisLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the special seismic load combinations should be considered in
    design. This is either"No" or "Yes".

    Page 1488 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlugWeld
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the doubler-plate should be considered to be plug-welded.
    This is either"No" or "Yes".

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1489 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - AISC-ASD89

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Page 1490 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: LatFactWind
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The allowable stress increase factor for loading combinations that include wind loads.

    Field: LatFactSeis
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The allowable stress increase factor for loading combinations that include seismic loads.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1491 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.

    Field: CmOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Cm is normally calculated from AISC ASD89 H1 when there are no significant lateral
    loads acting in the bending plane. The option "Program Determined" uses a very small
    tolerance on the change in shear for determining the presence of lateral loads. The option
    "Ignore Small Lateral Loads" uses the specified relative tolerance. The option "Ignore All
    lateral Loads" does not check for the presence of lateral loads.

    Page 1492 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is a relative tolerance on the change in shear force along the member used to
    determine the presence of lateral loads when CmOption is set to "Ignore Small Lateral
    Loads".

    Field: CbOption
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Cb is normally calculated from AISC ASD89 F1.3 when there are no significant lateral
    loads acting in the major bending plane. The option "Program Determined" checks that the
    magnitude of the largest moment along the member does not exceed the magnitude of the
    largest end moment to determine the presence of significant lateral loads. The option
    "Ignore Small Lateral Loads" uses the specified relative tolerance for cases where this
    condition is exceeded. The option "Ignore All lateral Loads" does not check for the
    presence of lateral loads.

    Field: CbTol
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is a relative tolerance on the moment along the member used to determine the
    presence of lateral loads when CbOption is set to "Ignore Small Lateral Loads".
    Table: Preferences - Steel Design - AISC-LRFD93

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .
    Page 1493 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Page 1494 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiCA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Page 1495 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - AISC-LRFD99

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Page 1496 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: SeisCat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"A", "B", "C", "D", "E", or "F". This is related to seismic design. This is a
    function of Occupancy Category and Sds or Sd1. See ASCE 7-05 section 11.6 for details.

    Field: SeisCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the seismic part of the code should be considered in design.
    This is either"No" or "Yes".

    Page 1497 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SeisLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the special seismic load combinations should be considered in
    design. This is either"No" or "Yes".

    Field: PlugWeld
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the doubler-plate should be considered to be plug-welded.
    This is either"No" or "Yes".

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiTY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiTF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Page 1498 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiVT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiCA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Page 1499 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - API RP2A-LRFD 97

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Page 1500 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: PunchMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Punching Shear" or "Nominal Load" indicating the method used to check
    the punching loads.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Page 1501 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - API RP2A-WSD2000

    Page 1502 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Page 1503 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: PunchMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Punching Shear" or "Nominal Load" indicating the method used to check
    the punching loads.

    Field: LatFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The allowable stress increase factor for loading combinations that include wind or seismic
    loads.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.
    Page 1504 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - ASCE 10-97

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Page 1505 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1506 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - AS 4100-1998

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    Page 1507 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: AMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"General 2nd Order" or "Amplified 1st Order" indicating the analysis method
    used to check/design the steel members. The design module does not verify the
    acceptability of the selected analysis method. See sections 4.1, 4.3, 4.4.1.2, and Appendix
    E of "AS 4100:1998" code for details. The user is expected to verify the acceptability of
    the selected method. The user is expected to set the appropriate notional loads.
    Page 1508 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SteelType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Hot Rolled", "Hot Finished", "Cold Formed", "Stress Relieved", "Lightly
    Welded", or "Heavily Welded" indicating the residual stress level in the structural section.
    This affects plasticity limit and yield limit of plate element slenderness values. Eventually
    this can affect moment capacity and axial compression capacity through modification on
    Ze and Aeff. "Hot Rolled" and "Hot Finished" are used synonymously in this program.
    "Cold Formed" is meant as cold-formed and not stress-relieved. "Stress Relieved" is
    meant as cold-formed and stress-relieved. Welded H and I sections are assumed to be
    fabricated from flame-cut plates. See sections 5.2.2, 6.2.4, 6.3.3, and Tables 5.2, 6.2.4,
    6.3.3(1), and 6.3.3(2) of "AS 4100:1998/NZS 3404:1997" code for details.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Capacity factor for strength limit state. See sections 3.4 and Table 3.4 of "AS 4100:1998"
    code for details.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Capacity factor for strength limit state. See sections 3.4 and Table 3.4 of "AS 4100:1998"
    code for details.

    Field: PhiTY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Capacity factor for strength limit state. See sections 3.4 and Table 3.4 of "AS 4100:1998"
    code for details.

    Field: PhiTF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Capacity factor for strength limit state. See sections 3.4 and Table 3.4 of "AS 4100:1998"
    code for details.

    Page 1509 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Capacity factor for strength limit state. See sections 3.4 and Table 3.4 of "AS 4100:1998"
    code for details.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1510 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - BS5950 2000

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Page 1511 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.
    Page 1512 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - BS5950 90

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Page 1513 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.
    Page 1514 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - CAN-CSA-S16-01

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Page 1515 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: AccRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Short Period Spectral Acceleration Ratio. This is Sa(T=0.2sec)
    multiplied by IE=e and Fa. It can assume different values in two orthogonal directions.
    The value specified here is solely used for design. The program uses the same value for
    all directions. See CSA S16-09/CSA S16-01/S16S1-05 section 27.1.1, NBCC section
    4.1.8.2, Table 4.1.8.9, Table 4.1.8.5, and Table 4.1.8.4B for details.

    Page 1516 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DuctFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Ductility Related Force Modification Factor. This reflects the capability
    of a structure to dissipate energy through inelastic behaviour. This is a function of Seismic
    Force Resisting System. It can assume different values in two orthogonal directions. The
    program uses the same value for all directions. The value specified here is solely used for
    design. See CSA S16-09/CSA S16-01/S16S1-05 section 27.1.1, NBCC sections 4.1.8.2
    and 4.1.8.9, and NBCC Table 4.1.8.9 for details.

    Field: OverFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Overstrength Related Force Modification Factor. This accounts for the
    dependable portion of reserve strength in a structure. This is a function of Seismic Force
    Resisting System. It can assume different values in two orthogonal directions. The
    program uses the same value for all directions. The value specified here is solely used for
    design. See CSA S16-09/CSA, S16-01/S16S1-05 section 27.1.1, NBCC sections 4.1.8.2
    and 4.1.8.9, and NBCC Table 4.1.8.9 for details.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Page 1517 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: SlenderMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider whether the Class 4 sections should be handled by modifying the
    geometry or by modifying fy. This is either"No" or "Yes".

    Field: SeisCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the seismic part of the code should be considered in design.
    This is either"No" or "Yes".

    Field: SeisLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the special seismic load combinations should be considered in
    design. This is either"No" or "Yes".

    Field: PlugWeld
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the doubler-plate should be considered to be plug-welded.
    This is either"No" or "Yes".

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Page 1518 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - CSA-S16-09

    Page 1519 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Page 1520 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: AccRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Short Period Spectral Acceleration Ratio. This is Sa(T=0.2sec)
    multiplied by IE=e and Fa. It can assume different values in two orthogonal directions.
    The value specified here is solely used for design. The program uses the same value for
    all directions. See CSA S16-09/CSA S16-01/S16S1-05 section 27.1.1, NBCC section
    4.1.8.2, Table 4.1.8.9, Table 4.1.8.5, and Table 4.1.8.4B for details.

    Field: DuctFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Ductility Related Force Modification Factor. This reflects the capability
    of a structure to dissipate energy through inelastic behaviour. This is a function of Seismic
    Force Resisting System. It can assume different values in two orthogonal directions. The
    program uses the same value for all directions. The value specified here is solely used for
    design. See CSA S16-09/CSA S16-01/S16S1-05 section 27.1.1, NBCC sections 4.1.8.2
    and 4.1.8.9, and NBCC Table 4.1.8.9 for details.

    Field: OverFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Overstrength Related Force Modification Factor. This accounts for the
    dependable portion of reserve strength in a structure. This is a function of Seismic Force
    Resisting System. It can assume different values in two orthogonal directions. The
    program uses the same value for all directions. The value specified here is solely used for
    design. See CSA S16-09/CSA, S16-01/S16S1-05 section 27.1.1, NBCC sections 4.1.8.2
    and 4.1.8.9, and NBCC Table 4.1.8.9 for details.

    Page 1521 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: SlenderMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Toggle to consider whether the Class 4 sections should be handled by modifying the
    geometry or by modifying fy. This is either"No" or "Yes".

    Field: SeisCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the seismic part of the code should be considered in design.
    This is either"No" or "Yes".

    Page 1522 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SeisLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the special seismic load combinations should be considered in
    design. This is either"No" or "Yes".

    Field: PlugWeld
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the doubler-plate should be considered to be plug-welded.
    This is either"No" or "Yes".

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Page 1523 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - Chinese 2010

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Page 1524 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: TallBldg
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the structure should be considered to be a tall building or a
    part of it.It affects the lo/r slenderness limit (GB50011 8.3.1, 8.4.2), b/t slenderness limit
    (GB50017 4.3.8, 5.4.1, 5.4.2, 5.4.3, 5.4.5; GB50011 8.3.2, 8.4.2), joint design (GB50011
    8.2.5), Gamma factor (GB50017 4.1.1, 4.1.2), Phib factor (JGJ 99-98 6.1.2).This is
    either"No" or "Yes".

    Field: Gamma0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Gamma0 factor that is related to seismic force amplification.

    Page 1525 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IgnoreBoT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the b/t ratio should be considered in classifying the steel
    sections.This is either"No" or "Yes".

    Field: BeamMandN
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the axial compression should be considered in classifying the
    steel beam sections.This is either"No" or "Yes".

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Page 1526 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - CISC 95

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Page 1527 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Page 1528 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1529 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - EUROCODE 3-1993

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Page 1530 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: GammaM0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor.

    Field: GammaM1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1531 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - Eurocode 3-2005

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    Page 1532 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: Country
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Country specific implementation considering country National Annex. CEN Default is the
    general version without an annex.

    Page 1533 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CombosEq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Design code combinations to consider. These are either generated from Eq. 6.10 or from
    both Eqs. 6.10a and 6.10b.

    Field: RelClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Reliabilty class which defines a scale factor for load combinations. This is currently only
    used for Denmark, Finland, and Sweden.

    Field: KFactorMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method for determining the interaction factors for Eurocode 3-2005. This is either Method
    1 from Annex A or Method 2 from Annex B.

    Field: GammaM0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor.

    Field: GammaM1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor.

    Field: GammaM2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The partial factor for resistance of cross-sections to tensile fracture, for Eurocode 3-2005.

    Page 1534 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SeisCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the seismic part of the code should be considered in design.
    This is either"No" or "Yes".

    Field: SeisLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the special seismic load combinations should be considered in
    design. This is either"No" or "Yes".

    Field: PlugWeld
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the doubler-plate should be considered to be plug-welded.
    This is either"No" or "Yes".

    Field: q
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Response Modification Factor. This is a function of Seismic Force
    Resisting System. The q values can be specified in the definition of Auto-Seismic Loads
    for load calculation. It can assume different values for load calculation in two orthogonal
    directions. The q value specifid here is solely used for design. For design, the program
    uses the same value for all directions. See EC8 sections 6.1.2(1), 6.3.2(1), and Table 6.2
    for details.

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the System Overstrength Factor. Omega factor is related to seismic factored
    member force and member capacity. It can assume different values in two orthogonal
    directions. The Omega value specified here is solely used for design. The program uses
    the same value for all directions. See EC8 sections 6.6.3(1), 6.7.4(1), 6.8.3(1), and
    6.8.4(1) for details.

    Page 1535 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1536 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Preferences - Steel Design - Indian IS 800:2007

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Page 1537 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: Country
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Country specific implementation considering country National Annex. CEN Default is the
    general version without an annex.

    Field: CombosEq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Design code combinations to consider. These are either generated from Eq. 6.10 or from
    both Eqs. 6.10a and 6.10b.

    Field: RelClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Reliabilty class which defines a scale factor for load combinations. This is currently only
    used for Denmark, Finland, and Sweden.

    Field: KFactorMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method for determining the interaction factors for Eurocode 3-2005. This is either Method
    1 from Annex A or Method 2 from Annex B.

    Field: GammaM0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor.

    Page 1538 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GammaM1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor.

    Field: GammaM2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The partial factor for resistance of cross-sections to tensile fracture, for Eurocode 3-2005.

    Field: SeisCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the seismic part of the code should be considered in design.
    This is either"No" or "Yes".

    Field: SeisLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the special seismic load combinations should be considered in
    design. This is either"No" or "Yes".

    Field: PlugWeld
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the doubler-plate should be considered to be plug-welded.
    This is either"No" or "Yes".

    Field: q
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Response Modification Factor. This is a function of Seismic Force
    Resisting System. The q values can be specified in the definition of Auto-Seismic Loads
    for load calculation. It can assume different values for load calculation in two orthogonal
    directions. The q value specifid here is solely used for design. For design, the program
    uses the same value for all directions. See EC8 sections 6.1.2(1), 6.3.2(1), and Table 6.2
    for details.
    Page 1539 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the System Overstrength Factor. Omega factor is related to seismic factored
    member force and member capacity. It can assume different values in two orthogonal
    directions. The Omega value specified here is solely used for design. The program uses
    the same value for all directions. See EC8 sections 6.6.3(1), 6.7.4(1), 6.8.3(1), and
    6.8.4(1) for details.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Page 1540 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - Indian IS:800-1998

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Page 1541 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: LatFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The allowable stress increase factor for loading combinations that include wind or seismic
    loads.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1542 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - Italian NTC 2008

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    Page 1543 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: CombosEq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Design code combinations to consider. These are either generated from Eq. 6.10 or from
    both Eqs. 6.10a and 6.10b.

    Page 1544 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RelClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Reliabilty class which defines a scale factor for load combinations. This is currently only
    used for Denmark, Finland, and Sweden.

    Field: KFactorMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method for determining the interaction factors for Eurocode 3-2005. This is either Method
    1 from Annex A or Method 2 from Annex B.

    Field: GammaM0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor.

    Field: GammaM1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor.

    Field: GammaM2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The partial factor for resistance of cross-sections to tensile fracture, for Eurocode 3-2005.

    Field: SeisCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the seismic part of the code should be considered in design.
    This is either"No" or "Yes".

    Page 1545 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SeisLoad
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the special seismic load combinations should be considered in
    design. This is either"No" or "Yes".

    Field: PlugWeld
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether the doubler-plate should be considered to be plug-welded.
    This is either"No" or "Yes".

    Field: q
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the Response Modification Factor. This is a function of Seismic Force
    Resisting System. The q values can be specified in the definition of Auto-Seismic Loads
    for load calculation. It can assume different values for load calculation in two orthogonal
    directions. The q value specifid here is solely used for design. For design, the program
    uses the same value for all directions. See EC8 sections 6.1.2(1), 6.3.2(1), and Table 6.2
    for details.

    Field: Omega
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is called the System Overstrength Factor. Omega factor is related to seismic factored
    member force and member capacity. It can assume different values in two orthogonal
    directions. The Omega value specified here is solely used for design. The program uses
    the same value for all directions. See EC8 sections 6.6.3(1), 6.7.4(1), 6.8.3(1), and
    6.8.4(1) for details.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Page 1546 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - Italian UNI 10011

    Page 1547 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Page 1548 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.
    Page 1549 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - NZS 3404-1997

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Page 1550 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: AMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"General 2nd Order" or "Amplified 1st Order" indicating the analysis method
    used to check/design the steel members. The design module does not verify the
    acceptability of the selected analysis method. See sections 4.1, 4.3, 4.4.1.2, and Appendix
    E of "AS 4100:1998" code for details. The user is expected to verify the acceptability of
    the selected method. The user is expected to set the appropriate notional loads.

    Field: SteelType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Hot Rolled", "Hot Finished", "Cold Formed", "Stress Relieved", "Lightly
    Welded", or "Heavily Welded" indicating the residual stress level in the structural section.
    This affects plasticity limit and yield limit of plate element slenderness values. Eventually
    this can affect moment capacity and axial compression capacity through modification on
    Ze and Aeff. "Hot Rolled" and "Hot Finished" are used synonymously in this program.
    "Cold Formed" is meant as cold-formed and not stress-relieved. "Stress Relieved" is
    meant as cold-formed and stress-relieved. Welded H and I sections are assumed to be
    fabricated from flame-cut plates. See sections 5.2.2, 6.2.4, 6.3.3, and Tables 5.2, 6.2.4,
    6.3.3(1), and 6.3.3(2) of "AS 4100:1998/NZS 3404:1997" code for details.

    Page 1551 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Capacity factor for strength limit state. See sections 3.4 and Table 3.4 of "AS 4100:1998"
    code for details.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Capacity factor for strength limit state. See sections 3.4 and Table 3.4 of "AS 4100:1998"
    code for details.

    Field: PhiTY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Capacity factor for strength limit state. See sections 3.4 and Table 3.4 of "AS 4100:1998"
    code for details.

    Field: PhiTF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Capacity factor for strength limit state. See sections 3.4 and Table 3.4 of "AS 4100:1998"
    code for details.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Capacity factor for strength limit state. See sections 3.4 and Table 3.4 of "AS 4100:1998"
    code for details.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Page 1552 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - Norsok N-004

    Page 1553 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Page 1554 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: CombosEq
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Design code combinations to consider. These are either generated from Eq. 6.10 or from
    both Eqs. 6.10a and 6.10b.

    Field: KFactorMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method for determining the interaction factors for Eurocode 3-2005. This is either Method
    1 from Annex A or Method 2 from Annex B.

    Field: NSInteractionMethod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Method for calculating combined loads with hydrostatic pressure. This is either Method A
    with external pressure ignored in the analysis or Method B with it included.

    Field: GammaM0
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor.

    Field: GammaM1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strength reduction factor.

    Page 1555 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GammaM2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The partial factor for resistance of cross-sections to tensile fracture, for Eurocode 3-2005.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1556 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - UBC97-ASD

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Page 1557 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: SeisZone
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Zone 0", "Zone 1", "Zone 2", "Zone 3", or "Zone 4". This is related to
    seismic design.

    Field: LatFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The allowable stress increase factor for loading combinations that include wind or seismic
    loads.

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Page 1558 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Table: Preferences - Steel Design - UBC97-LRFD

    Field: THDesign
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either "Envelopes", "Step-by-Step", "Last Step", "Envelopes - All", or "Step-byStep - All" indicating how results for multivalued cases (Time history, Nonlinear static or
    Multi-step static) are considered in the design. - Envelope - considers enveloping values
    for Time History and Multi-step static and last step values for Nonlinear static.
    - Step-by-Step - considers step by step values for Time History and Multi-step static and
    last step values for Nonlinear static.
    - Last Step - considers last values for Time History, Multi-step static and Nonlinear static.
    - Envelope - All - considers enveloping values for Time History, Multi-step static and
    Nonlinear static.
    Page 1559 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    - Step-by-Step - All - considers step by step values for Time History, Multi-step static and
    Nonlinear static.
    Step-by-Step and Step-by-Step - All default to the corresponding Envelope if more then
    one multivalued case is present in the combo.
    .

    Field: FrameType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"SMF", "IMF", "OMF", "SCBF", "OCBF", "OCBFI", or "EBF". This item is
    used for ductility considerations in the design.

    Field: PatLLF
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The live load factor for automatic generation of load combinations involving pattern live
    loads and dead loads. ".

    Field: SRatioLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The demand/capacity ratio limit to be used for acceptability. D/C ratios that are less than
    or equal to this value are considered acceptable.

    Field: MaxIter
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum number of automatic iterations the program will perform while designing
    frame elements with auto select section lists. This is for future use. It is not currently
    active.

    Field: SeisZone
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either"Zone 0", "Zone 1", "Zone 2", "Zone 3", or "Zone 4". This is related to
    seismic design.

    Page 1560 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ImpFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is related to seismic design. This is a function of Occupancy Category. See ASCE 705 section 11.5.1 for details.

    Field: PhiB
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiT
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiV
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Field: PhiCA
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor.

    Page 1561 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CheckDefl
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Toggle to consider whether deflection limitations should be considered in design.This is
    either"No" or "Yes".

    Field: DLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for dead load.Inputting 120 means that the limit is L/120.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: SDLAndLLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed dead plus live load.Inputting 120 means that the
    limit is L/120.Inputting zero is special, since it means no check has to be made for this
    item.

    Field: LLRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for superimposed live load.Inputting 360 means that the limit is
    L/360.Inputting zero is special, since it means no check has to be made for this item.

    Field: TotalRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Deflection limitation for total load.Inputting 240 means that the limit is L/240.Inputting
    zero is special, since it means no check has to be made for this item.

    Field: NetRat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Limitation for net deflection. Camber is subtracted from the total load deflection to get
    net deflection.Inputting 240 means that the limit is L/240.Inputting zero is special, since it
    means no check has to be made for this item.
    Page 1562 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Program Control

    Field: ProgramName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The program name.

    Field: Version
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The program version.

    Field: ProgLevel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The program level.

    Field: LicenseNum
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The program license number.

    Field: LicenseOS
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the Offshore license is active. Otherwise it is No.

    Field: LicenseSC
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the Staged Construction license is active. Otherwise it is No.

    Page 1563 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LicenseHT
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the Heat Transfer license is active. Otherwise it is No.

    Field: CurrUnits
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The current units at the time the database tables are created. Possible values for this
    include:
    lb, in, F
    lb, ft, F
    Kip, in, F
    Kip, ft, F
    KN, mm, C
    KN, m, C
    Kgf, mm, C
    Kgf, m, C
    N, mm, C
    N, m, C
    Tonf, mm, C
    Tonf, m, C
    KN, cm, C
    Kgf, cm, C
    N, cm, C
    Tonf, cm, C
    For import the letters DEG can be substituted for the degree symbol if desired.
    .

    Field: SteelCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design code used for steel frame design.

    Field: ConcCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design code used for concrete frame design.

    Page 1564 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlumCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design code used for aluminum frame design.

    Field: ColdCode
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The design code used for cold formed frame design.

    Field: RegenHinge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the hinge properties are regenerated after database imports. Otherwise
    it is No.
    .
    Table: Project Information

    Field: Item
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The project information item.

    Field: Data
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The project information data for the associated item.
    Table: Pushover Parameters - ATC40

    Field: ParamName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of an ATC40 pushover parameter set.

    Page 1565 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlotAxes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'Sa-Sd', 'Sa-T' or 'Sd-T' indicating the axes used in the capacity spectrum
    plot.

    Field: DemandFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Function or ATC40 indicating how the demand response spectrum is
    obtained. Function means the demand response spectrum is a specified user-defined
    response spectrum function. ATC40 means the demand response spectrum is created from
    user specified Ca and Cv values as specified in ATC40.

    Field: Function
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the response spectrum function used for the demand curves in a capacity
    spectrum plot. This item is only applicable when the DemandFrom item is Function.

    Field: FuncSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The scale factor by which the function values are multiplied.This item is only applicable
    when the DemandFrom item is Function.

    Field: Ca
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Ca coefficient for demand curves in a capacity spectrum plot.This item is only
    applicable when the DemandFrom item is ATC40.

    Field: Cv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Cv coefficient for demand curves in a capacity spectrum plot.This item is only
    applicable when the DemandFrom item is ATC40.
    Page 1566 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AddDamp
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The inherent and additional structural damping used in the capacity spectrum plot.

    Field: StructType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, or User indicating the structural type.

    Field: BetaZero1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Percent
    The BetaSubZero value for point 1 associated with the specified StructType item.

    Field: Kappa1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Kappa value for point 1 associated with the specified StructType item.

    Field: BetaZero2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Percent
    The BetaSubZero value for point 2 associated with the specified StructType item.

    Field: Kappa2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Kappa value for point 1 associated with the specified StructType item.

    Field: PlotCap
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the capacity curve is to be displayed on the capacity spectrum plot.
    Otherwise it is No.
    Page 1567 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlotDemand
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the demand spectra for different damping levels are to be displayed on
    the capacity spectrum plot. Otherwise it is No.

    Field: PlotLocus
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the locus of possible performance points (single demand spectrum with
    variable damping) is to be displayed on the capacity spectrum plot. Otherwise it is No.

    Field: PlotPeriod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the lines of constant period are to be displayed on the capacity spectrum
    plot. Otherwise it is No.

    Field: CapColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which This is
    either a defined color or an integer representation of the color in which the capacity will be
    displayed.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: DemandColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which This is
    either a defined color or an integer representation of the color in which the family of
    demand curves will be displayed.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Page 1568 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: LocusColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which the locus of
    possible performance points (single demand curve with variable damping) will be
    displayed.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: PeriodColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which the period
    lines will be displayed.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: Damp1
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The first of four user specified damping values for which demand spectra will be
    displayed on the capacity spectrum plot if the PlotDemand item is Yes.

    Field: Damp2
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The second of four user specified damping values for which demand spectra will be
    displayed on the capacity spectrum plot if the PlotDemand item is Yes.

    Page 1569 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Damp3
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The third of four user specified damping values for which demand spectra will be
    displayed on the capacity spectrum plot if the PlotDemand item is Yes.

    Field: Damp4
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The fourth of four user specified damping values for which demand spectra will be
    displayed on the capacity spectrum plot if the PlotDemand item is Yes.

    Field: Period1
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The first of four user specified periods which will be displayed on the capacity spectrum
    plot if the PlotPeriod item is Yes.

    Field: Period2
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The second of four user specified periods which will be displayed on the capacity
    spectrum plot if the PlotPeriod item is Yes.

    Field: Period3
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The third of four user specified periods which will be displayed on the capacity spectrum
    plot if the PlotPeriod item is Yes.

    Field: Period4
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The fourth of four user specified periods which will be displayed on the capacity spectrum
    plot if the PlotPeriod item is Yes.
    Table: Pushover Parameters - Axis Data

    Page 1570 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlotType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The type of pushover parameter set associated with the specified axis data. This is one of
    the following: Force-Displ,
    ATC40,
    FEMA356,
    FEMA440EL,
    FEMA440DM.

    Field: ParamName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a pushover parameter set of the type specified by the PlotType item.

    Field: DisplMin
    Field is Imported: Yes
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The minimum displacement value displayed.

    Field: DisplMax
    Field is Imported: Yes
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The maximum displacement value displayed.

    Field: ForceMin
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The minimum force value displayed.

    Field: ForceMax
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The maximum force value displayed.

    Page 1571 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SaMin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The minimum spectral acceleration (g) value displayed.

    Field: SaMax
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum spectral acceleration (g) value displayed.

    Field: PeriodMin
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The minimum period value displayed.

    Field: PeriodMax
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The maximum period value displayed.

    Field: HorizLabel
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The horizontal axis label.

    Field: VertLabel
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The vertical axis label.

    Field: Note
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    A short note that is displayed with printed graphical output.
    Table: Pushover Parameters - FEMA356
    Page 1572 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ParamName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of an FEMA356 pushover parameter set.

    Field: Beff
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The effective viscous damping for the structure.

    Field: DemandFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Function or FEMA356 indicating how the demand response spectrum is
    obtained. Function means the demand response spectrum is a specified user-defined
    response spectrum function. FEMA356 means the demand response spectrum is created
    from user specified Ss, S1 and Site Class values as specified in section 1.6 of FEMA356.

    Field: Function
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the response spectrum function used for the demand curves in a capacity
    spectrum plot. This item is only applicable when the DemandFrom item is Function.

    Field: FuncSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The scale factor by which the function values are multiplied. This item is only applicable
    when the DemandFrom item is Function.

    Field: FuncTs
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The characteristic period, Ts, of the response spectrum. This is the point where the
    response spectrum switches from constant acceleration to constant velocity. This item is
    only applicable when the DemandFrom item is Function.

    Page 1573 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Ss coefficient for demand curves in a capacity spectrum plot. This item is only
    applicable when the DemandFrom item is FEMA356.

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The S1 coefficient for demand curves in a capacity spectrum plot. This item is only
    applicable when the DemandFrom item is FEMA356.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D or E indicating the site class for demand curves in a capacity
    spectrum plot. This item is only applicable when the DemandFrom item is FEMA356.

    Field: UserC2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a user specified value is used for the C2 coefficient in FEMA356
    Equation 3-15. Otherwise it is No.

    Field: UserC3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a user specified value is used for the C3 coefficient in FEMA356
    Equation 3-15.

    Field: UserCm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a user specified value is used for the Cm coefficient in FEMA356
    Equation 3-16. Otherwise it is No.

    Page 1574 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlotCap
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the force-displacement curve is to be displayed. Otherwise it is No.

    Field: PlotBiLin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the idealized bilinear force-displacement curve is to be displayed.
    Otherwise it is No.

    Field: CapColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which the forcedisplacement will be displayed.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: BiLinColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which the
    idealized bilinear force-displacement will be displayed.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.
    Table: Pushover Parameters - FEMA440 Displacement Modification

    Field: ParamName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of an FEMA440 displacement modification pushover parameter set.

    Page 1575 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Beff
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The effective viscous damping for the structure.

    Field: DemandFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Function or FEMA356 indicating how the demand response spectrum is
    obtained. Function means the demand response spectrum is a specified user-defined
    response spectrum function. FEMA356 means the demand response spectrum is created
    from user specified Ss, S1 and Site Class values as specified in section 1.6 of FEMA356.

    Field: Function
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the response spectrum function used for the demand curves in a capacity
    spectrum plot. This item is only applicable when the DemandFrom item is Function.

    Field: FuncSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The scale factor by which the function values are multiplied. This item is only applicable
    when the DemandFrom item is Function.

    Field: FuncTs
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The characteristic period, Ts, of the response spectrum. This is the point where the
    response spectrum switches from constant acceleration to constant velocity. This item is
    only applicable when the DemandFrom item is Function.

    Field: Ss
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Ss coefficient for demand curves in a capacity spectrum plot. This item is only
    applicable when the DemandFrom item is FEMA356.
    Page 1576 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: S1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The S1 coefficient for demand curves in a capacity spectrum plot. This item is only
    applicable when the DemandFrom item is FEMA356.

    Field: SiteClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either A, B, C, D or E indicating the site class for demand curves in a capacity
    spectrum plot. This item is only applicable when the DemandFrom item is FEMA356.

    Field: IncludeSSI
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if soil structure interaction is included when calculating the demand.
    Otherwise it is No.

    Field: UserC2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a user specified value is used for the C2 coefficient (see FEMA440
    Equation 5-2). Otherwise it is No.

    Field: UserCm
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a user specified value is used for the Cm coefficient in FEMA356
    Equation 3-16. Otherwise it is No.

    Field: PlotCap
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the force-displacement curve is to be displayed. Otherwise it is No.

    Page 1577 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlotBiLin
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the idealized bilinear force-displacement curve is to be displayed.
    Otherwise it is No.

    Field: CapColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which the forcedisplacement will be displayed.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: BiLinColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which the
    idealized bilinear force-displacement will be displayed.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.
    Table: Pushover Parameters - FEMA440 Equivalent Linearization

    Field: ParamName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of an FEMA440 Equivalent Linearization pushover parameter set.

    Field: PlotAxes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'Sa-Sd', 'Sa-T' or 'Sd-T' indicating the axes used in the capacity spectrum
    plot.
    Page 1578 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DemandFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Function or ATC40 indicating how the demand response spectrum is
    obtained. Function means the demand response spectrum is a specified user-defined
    response spectrum function. ATC40 means the demand response spectrum is created from
    user specified Ca and Cv values as specified in ATC40.

    Field: Function
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the response spectrum function used for the demand curves in a capacity
    spectrum plot. This item is only applicable when the DemandFrom item is Function.

    Field: FuncSF
    Field is Imported: Yes
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The scale factor by which the function values are multiplied. This item is only applicable
    when the DemandFrom item is Function.

    Field: Ca
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Ca coefficient for demand curves in a capacity spectrum plot. This item is only
    applicable when the DemandFrom item is ATC40.

    Field: Cv
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The Cv coefficient for demand curves in a capacity spectrum plot. This item is only
    applicable when the DemandFrom item is ATC40.

    Field: IncludeSSI
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if soil structure interaction is included when calculating the demand.
    Otherwise it is No.
    Page 1579 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AddDamp
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The inherent and additional structural damping used in the capacity spectrum plot.

    Field: UserBeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then Beff is calculated using FEMA440 Equations 6-1, 6-2 and 6-3
    together with user specified values of the coefficients A, B, C, D, E and F. If this item is
    No then Beff is calculated using FEMA440 Equations 6-4, 6-5 and 6-6.

    Field: A
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient A used in FEMA440 Equations 6-1, 6-2 and 6-3 to calculate Beff. This
    item is only applicable when the UserBeff item is Yes.

    Field: B
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient B used in FEMA440 Equations 6-1, 6-2 and 6-3 to calculate Beff. This
    item is only applicable when the UserBeff item is Yes.

    Field: C
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient C used in FEMA440 Equations 6-1, 6-2 and 6-3 to calculate Beff. This
    item is only applicable when the UserBeff item is Yes.

    Field: D
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient D used in FEMA440 Equations 6-1, 6-2 and 6-3 to calculate Beff. This
    item is only applicable when the UserBeff item is Yes.

    Page 1580 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: E
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient E used in FEMA440 Equations 6-1, 6-2 and 6-3 to calculate Beff. This
    item is only applicable when the UserBeff item is Yes.

    Field: F
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient F used in FEMA440 Equations 6-1, 6-2 and 6-3 to calculate Beff. This
    item is only applicable when the UserBeff item is Yes.

    Field: UserTeff
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    If this item is Yes then Teff is calculated using FEMA440 Equations 6-7, 6-8 and 6-9
    together with user specified values of the coefficients G, H, I, J, K and L. If this item is
    No then Teff is calculated using FEMA440 Equations 6-10, 6-11 and 6-12.

    Field: G
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient G used in FEMA440 Equations 6-7, 6-8 and 6-9 to calculate Teff. This
    item is only applicable when the UserTeff item is Yes.

    Field: H
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient H used in FEMA440 Equations 6-7, 6-8 and 6-9 to calculate Teff. This
    item is only applicable when the UserTeff item is Yes.

    Field: I
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient I used in FEMA440 Equations 6-7, 6-8 and 6-9 to calculate Teff. This
    item is only applicable when the UserTeff item is Yes.

    Page 1581 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: J
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient J used in FEMA440 Equations 6-7, 6-8 and 6-9 to calculate Teff. This
    item is only applicable when the UserTeff item is Yes.

    Field: K
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient K used in FEMA440 Equations 6-7, 6-8 and 6-9 to calculate Teff. This
    item is only applicable when the UserTeff item is Yes.

    Field: L
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The coefficient L used in FEMA440 Equations 6-7, 6-8 and 6-9 to calculate Teff. This
    item is only applicable when the UserTeff item is Yes.

    Field: PlotCap
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the capacity curve is to be displayed on the capacity spectrum plot.
    Otherwise it is No.

    Field: PlotDemand
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the demand spectra for different damping levels are to be displayed on
    the capacity spectrum plot. Otherwise it is No.

    Field: PlotLocus
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the locus of possible performance points is to be displayed on the
    capacity spectrum plot. Otherwise it is No.

    Page 1582 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlotPeriod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the lines of constant period are to be displayed on the capacity spectrum
    plot. Otherwise it is No.

    Field: CapColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which the capacity
    will be displayed.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: DemandColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which the family
    of demand curves will be displayed.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: LocusColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which the locus of
    possible performance points will be displayed.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Page 1583 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PeriodColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color in which the period
    lines will be displayed.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: DuctRatio1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The first of four user specified ductility ratios for which demand spectra will be displayed
    on the capacity spectrum plot if the PlotDemand item is Yes.

    Field: DuctRatio2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The second of four user specified ductility ratios for which demand spectra will be
    displayed on the capacity spectrum plot if the PlotDemand item is Yes.

    Field: DuctRatio3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The third of four user specified ductility ratios for which demand spectra will be displayed
    on the capacity spectrum plot if the PlotDemand item is Yes.

    Field: DuctRatio4
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The fourth of four user specified ductility ratios for which demand spectra will be
    displayed on the capacity spectrum plot if the PlotDemand item is Yes.

    Page 1584 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Period1
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The first of four user specified periods which will be displayed on the capacity spectrum
    plot if the PlotPeriod item is Yes.

    Field: Period2
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The second of four user specified periods which will be displayed on the capacity
    spectrum plot if the PlotPeriod item is Yes.

    Field: Period3
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The third of four user specified periods which will be displayed on the capacity spectrum
    plot if the PlotPeriod item is Yes.

    Field: Period4
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The fourth of four user specified periods which will be displayed on the capacity spectrum
    plot if the PlotPeriod item is Yes.
    Table: Pushover Parameters - FEMA440 Soil Structure Interaction

    Field: PlotType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The type of pushover parameter set associated with the specified axis data. This is one of
    the following:
    FEMA440EL FEMA440DM.

    Field: ParamName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a pushover parameter set of the type specified by the PlotType item.

    Page 1585 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: KinEffects
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if kinematic effects are to be included in the soil structure interaction
    calculations. Otherwise it is No.

    Field: EffSize
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The effective foundation size specified as be in FEMA440 Section 8.2.

    Field: Embedment
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The foundation embedment specified as e in FEMA440 Section 8.2.

    Field: SWaveVel
    Field is Imported: Yes
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    The shear wave velocity for the site soil conditions specified as vs in FEMA440 Section
    8.2.

    Field: SWaveFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The shear wave velocity reduction factor specified as n in FEMA440 Section 8.2.

    Field: FndDamp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if foundation damping is to be included in the soil structure interaction
    calculations. Otherwise it is No.

    Page 1586 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BetaZero
    Field is Imported: Yes
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The flexible-base damping ratio calculated in FEMA440 Equation 8-10.
    Table: Pushover Parameters - Force Displacement

    Field: ParamName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a base shear versus monitiored displacement pushover parameter set.

    Field: CapColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color used for the plotted
    capacity curve.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.
    Table: Rebar Sizes

    Field: RebarID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    ID (name) of reinforcing bar.

    Field: Area
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of specified reinforcing bar.

    Field: Diameter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Diameter of specified reinforcing bar.
    Page 1587 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: SD Stress-Strain 01 - Rebar Park

    Field: RebarID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    ID (name) of reinforcing bar.

    Field: Area
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of specified reinforcing bar.

    Field: Diameter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Diameter of specified reinforcing bar.
    Table: SD Stress-Strain 02 - Rebar Simple

    Field: RebarID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    ID (name) of reinforcing bar.

    Field: Area
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of specified reinforcing bar.

    Field: Diameter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Diameter of specified reinforcing bar.
    Table: SD Stress-Strain 03 - Structural Steel

    Page 1588 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RebarID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    ID (name) of reinforcing bar.

    Field: Area
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of specified reinforcing bar.

    Field: Diameter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Diameter of specified reinforcing bar.
    Table: SD Stress-Strain 04 - Concrete Simple

    Field: RebarID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    ID (name) of reinforcing bar.

    Field: Area
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of specified reinforcing bar.

    Field: Diameter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Diameter of specified reinforcing bar.
    Table: SD Stress-Strain 05 - Concrete Mander Unconfined

    Page 1589 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RebarID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    ID (name) of reinforcing bar.

    Field: Area
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of specified reinforcing bar.

    Field: Diameter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    Diameter of specified reinforcing bar.
    Table: SD Stress-Strain 06 - Concrete Mander Confined Circle

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: NumLBar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of longitudinal rebars.

    Page 1590 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LBarSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Area or a rebar size for the longitudinal steel. User Area means that a
    rebar area is specified instead of a rebar size.

    Field: LBarArea
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The area of a longitudinal rebar. This item only applies when the LBarSize item is User
    Area.

    Field: CnfType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Hoop or Spiral indicating confinement type.

    Field: CnfDiam
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the confinement hoops or spirals.

    Field: CnfLSpcg
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The longitudinal spacing (CL to CL of rebar) of the confinement rebar.

    Field: CnfBarSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Area or a rebar size for the confinement steel. User Area means that a
    rebar area is specified instead of a rebar size.

    Page 1591 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CnfBarArea
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The area of a confinement rebar. This item only applies when the CnfBarSize item is User
    Area.

    Field: CnfBarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material for the confinement rebar.

    Field: CnfEcuLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum limit for the ultimate confined concrete strain capacity.

    Field: Part
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Core, Outer or Other indicating to which concrete the stress-strain curve
    applies. This item only applies to Caltrans shapes.
    Table: SD Stress-Strain 07 - Concrete Mander Confined Rectangle

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Page 1592 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumLBar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of longitudinal rebars.

    Field: LBarSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Area or a rebar size for the longitudinal steel. User Area means that a
    rebar area is specified instead of a rebar size.

    Field: LBarArea
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The area of a longitudinal rebar. This item only applies when the LBarSize item is User
    Area.

    Field: CnfXDim
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The dimension of the rectangular confinement rebar cage (CL to CL of rebar) measured
    along one of its edges designated as Edge X. Edge X is adjacent to Edge Y.

    Field: nCnfXBar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of perimeter hoop legs along Edge X of the confinement rebar cage.

    Field: CnfYDim
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The dimension of the rectangular confinement rebar cage (CL to CL of rebar) measured
    along one of its edges designated as Edge Y. Edge Y is adjacent to Edge X.

    Page 1593 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: nCnfYBar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of perimeter hoop legs along Edge Y of the confinement rebar cage.

    Field: CnfBarSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Area or a rebar size for the perimeter hoop legs along Edge X and Y of
    the confinement rebar cage. User Area means that a rebar area is specified instead of a
    rebar size.

    Field: CnfBarArea
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The area of a confinement rebar for the perimeter hoop legs along Edge X and Y of the
    confinement rebar cage. This item only applies when the CnfYBarSize item is User Area.

    Field: CnfLSpcg
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The longitudinal spacing (CL to CL of rebar) of the confinement rebar.

    Field: CnfBarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material for the confinement rebar.

    Field: CnfEcuLim
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The maximum limit for the ultimate confined concrete strain capacity.

    Page 1594 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Part
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Core, Outer or Other indicating to which concrete the stress-strain curve
    applies. This item only applies to Caltrans shapes.
    Table: Section Cuts 1 - General

    Field: CutName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the section cut.

    Field: DefinedBy
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Group or Quad indicating how the section cut is defined.

    Field: Group
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    If the section cut is defined by a group then this is the name of the group that defines the
    section cut.
    If the section cut is defined by one or more quadrilaterals then all elements that are fully
    cut by the quadrilaterals and have their associated objects included in the specified group
    are considered to be part of the section cut.

    Field: ResultType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Analysis or Design indicating the type of output desired. The sign
    convention used is different for analysis and design results.

    Page 1595 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DefaultLoc
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the section cut forces are reported at the program default location. It is
    No if the forces are reported at a user-specified location.
    The default location is at the average coordinates of all of the joints included in the group
    that is used to define the section cut.

    Field: GlobalX
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X-coordinate of the point where the section cut forces are reported.

    Field: GlobalY
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y-coordinate of the point where the section cut forces are reported.

    Field: GlobalZ
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z-coordinate of the point where the section cut forces are reported.

    Field: AngleA
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    AngleA, AngleB and AngleC define the rotation of the section cut local coordinate system
    relative to the coordinate system determined from the reference vectors. In the case where
    the default reference vectors are used, the angles define the orientation of the local
    coordinate system with respect to the global axes.
    The orientation of the local coordinate system is obtained according to the following
    procedure: (1) The local system is first rotated about its 3 axis by AngleA. (2) The local
    system is next rotated about its resulting +2 axis by AngleB. (3) The local system is lastly
    rotated about its resulting +1 axis by AngleC. Note that the order in which these rotations
    are performed is important.
    This item is only applicable when the ResultType is Analysis.
    Page 1596 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AngleB
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    AngleA, AngleB and AngleC define the rotation of the section cut local coordinate system
    relative to the coordinate system determined from the reference vectors. In the case where
    the default reference vectors are used, the angles define the orientation of the local
    coordinate system with respect to the global axes.
    The orientation of the local coordinate system is obtained according to the following
    procedure: (1) The local system is first rotated about its 3 axis by AngleA. (2) The local
    system is next rotated about its resulting +2 axis by AngleB. (3) The local system is lastly
    rotated about its resulting +1 axis by AngleC. Note that the order in which these rotations
    are performed is important.
    This item is only applicable when the ResultType is Analysis.

    Field: AngleC
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    AngleA, AngleB and AngleC define the rotation of the section cut local coordinate system
    relative to the coordinate system determined from the reference vectors. In the case where
    the default reference vectors are used, the angles define the orientation of the local
    coordinate system with respect to the global axes.
    The orientation of the local coordinate system is obtained according to the following
    procedure: (1) The local system is first rotated about its 3 axis by AngleA. (2) The local
    system is next rotated about its resulting +2 axis by AngleB. (3) The local system is lastly
    rotated about its resulting +1 axis by AngleC. Note that the order in which these rotations
    are performed is important.
    This item is only applicable when the ResultType is Analysis.

    Field: AdvanceAxes
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if an advanced method is used to define the local axes reference vectors
    for the section cut. Otherwise it is No meaning that the default reference vectors are used.
    This item is only applicable when the ResultType is Analysis.

    Page 1597 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Wall, Spandrel or Slab indicating how the section cut local axes are oriented.
    This item is only applicable when the ResultType is Design.
    For walls the local 1 axis is parallel to global Z and the local 2 and 3 axes lie in a global
    XY plane. For spandrels and slabs the local 2 axis is parallel to global Z and the local 1
    and 3 axes lie in a global XY plane.

    Field: DesignAngle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle defining the local axes orientation. The angle defining the local axes
    orientation. This item is only applicable when the ResultType is Design.
    For walls this is the angle from the global X axis to the local 2 axis. For spandrels and
    slabs this is the angle from the global X axis to the local 1 axis.

    Field: ElemSide
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Positive or Negative indicating the side of the specified elements on which
    the section cut results are reported.
    Positive refers to the Top (for Design-Wall), Right (for Design-Spandrel and Design-Slab)
    or Positive 3 (for Analysis) side of the quadrilaterals.
    Negative refers to the Bottom (for Design-Wall), Left (for Design-Spandrel and DesignSlab) or Negative 3 (for Analysis) side of the quadrilaterals.
    This item does not apply when the DefinedBy item is Group and the ResultType item is
    Analysis.

    Field: NumQuads
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of quadrilaterals used to define the section cut. This item is only applicable
    when the DefinedBy item is Quad.
    Table: Section Cuts 2 - Advanced Local Axes

    Page 1598 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SectionCut
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the section cut.

    Field: LocalPlane
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the local plane that is to be determined by the plane reference vector.
    It is either 12, 13, 21, 23, 31, or 32.

    Field: AxOption1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Coord Dir, Two Joints or User Vector indicating the first method used to
    determine the axial reference vector.

    Field: AxCoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system used to define the axial reference vector coordinate direction and
    the axial user vector.

    Field: AxCoordDir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Axial coordinate direction taken at the output point in the specified coordinate system and
    used to define the axis reference vector. It may be one of +X, +Y, +Z, +CR, +CA, +CZ,
    +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Field: AxVecJt1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    AxVecJt1 and AxVecJt2 are the labels of two joints that define the axis reference vector.
    If one of these items is reported as None then it means the specified section cut output
    location. If both of these items are reported as None then this option is not used to define
    the axis reference vector.
    Page 1599 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AxVecJt2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    AxVecJt1 and AxVecJt2 are the labels of two joints that define the axis reference vector.
    If one of these items is reported as None then it means the specified section cut output
    location. If both of these items are reported as None then this option is not used to define
    the axis reference vector.

    Field: PlOption1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Coord Dir, Two Joints or User Vector indicating the first method used to
    determine the plane reference vector.

    Field: PlCoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system used to define the plane reference vector coordinate directions and
    the plane user vector.

    Field: CoordDir1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    primary coordinate direction taken at the specified section cut output location in the
    specified coordinate system. It is used to determine the plane reference vector. It may be
    one of +X, +Y, +Z, +CR, +CA, +CZ, +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB,
    -SA, -SR.

    Field: CoordDir2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    secondary coordinate direction taken at the specified section cut output location in the
    specified coordinate system. It is used to determine the plane reference vector. It may be
    one of +X, +Y, +Z, +CR, +CA, +CZ, +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB,
    -SA, -SR.

    Page 1600 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlVecJt1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    PlVecJt1 and PlVecJt2 are the labels of two joints that define the plane reference vector.
    Either of these items may be specified as None to indicate the specified section cut output
    location. If both PlVecJt1 and PlVecJt2 are specified as None then they are not used to
    define the plane reference vector.

    Field: PlVecJt2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    PlVecJt1 and PlVecJt2 are the labels of two joints that define the plane reference vector.
    Either of these items may be specified as None to indicate the specified section cut output
    location. If both PlVecJt1 and PlVecJt2 are specified as None then they are not used to
    define the plane reference vector.

    Field: AxVecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    X direction component of the axis reference vector in the coordinate system defined by the
    CoordSys item.

    Field: AxVecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Y direction component of the axis reference vector in the coordinate system defined by the
    CoordSys item.

    Field: AxVecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Z direction component of the axis reference vector in the coordinate system defined by the
    CoordSys item.

    Page 1601 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlVecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    X direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.

    Field: PlVecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Y direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.

    Field: PlVecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Z direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.
    Table: Section Cuts 3 - Quadrilateral Definitions

    Field: SectionCut
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the section cut.

    Field: QuadNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of the quadrilateral.

    Field: PointNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The point number of the specified point in the quadrilateral.

    Page 1602 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: X
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the specified point.

    Field: Y
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the specified point.

    Field: Z
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the specified point.
    Table: Section Designer Properties 01 - General

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: DesignType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either No Check/Design, General Steel or Concrete Column indicating the type of
    design for the section.
    The General Steel design type only applies to sections with a steel base material. The
    Concrete Column design type only applies to sections with a concrete base material.

    Field: DsgnOrChck
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item only applies to sections whose DesignType is Concrete Column. For Concrete
    Column DesignTypes this item is either Design or Check indicating whether the specified
    section is to be designed or checked. For other DesignTypes this item is N/A.
    Page 1603 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BaseMat
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The base material of the section designer section. Note that each of the shapes that make
    up the section may have a specified material that is different from the base material. The
    section properties of the section are calculated and reported based on an equivalent area of
    the base material.
    This material is also reported in the Frame Section Properties 01 - General table.
    For import the base material is read from the Frame Section Properties 01 - General table
    only.

    Field: IncludeVStr
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Whether or not the shear stress is included in the stress calculation for the stress points.

    Field: nTotalShp
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The total number of shapes that make up the section.

    Field: nIWideFlng
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of I/Wide Flange shapes in the section designer section.

    Field: nChannel
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Channel shapes in the section designer section.

    Field: nTee
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Tee shapes in the section designer section.
    Page 1604 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: nAngle
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Angle shapes in the section designer section.

    Field: nDblAngle
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Double shapes in the section designer section.

    Field: nBoxTube
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Box/Tube shapes in the section designer section.

    Field: nPipe
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Pipe shapes in the section designer section.

    Field: nPlate
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Plate shapes in the section designer section.

    Field: nSolidRect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Solid Rectangle shapes in the section designer section.

    Field: nSolidCirc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Solid Circle shapes in the section designer section.

    Page 1605 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: nSolidSeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Solid Segment shapes in the section designer section.

    Field: nSolidSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Solid Sector shapes in the section designer section.

    Field: nPolygon
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Polygon shapes in the section designer section.

    Field: nReinfSing
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Reinforcing Single shapes in the section designer section.

    Field: nReinfLine
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Reinforcing Line shapes in the section designer section.

    Field: nReinfRect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Reinforcing Rectangle shapes in the section designer section.

    Field: nReinfCirc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Reinforcing Circle shapes in the section designer section.

    Page 1606 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: nRefLine
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Reference Line shapes in the section designer section.

    Field: nRefCirc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Reference Circle shapes in the section designer section.

    Field: nCaltransSq
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Caltrans Square shapes in the section designer section.

    Field: nCaltransCr
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Caltrans Circle shapes in the section designer section.

    Field: nCaltransHx
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Caltrans Hexagon shapes in the section designer section.

    Field: nCaltransOc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of Caltrans Octagon shapes in the section designer section.
    Table: Section Designer Properties 02 - Reinforcing At Shape Edges

    Page 1607 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: Type
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of shape.

    Field: EdgeID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A number identifying the shape edge to which the reinforcing applies.

    Field: BarSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User, the rebar size along the specified shape edge, or None if no rebar exists
    along the . If this item is User then the rebar area is taken from the BarArea item.

    Field: BarArea
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The rebar area along the specified shape edge. This item is only imported when the
    BarSize item is User.

    Page 1608 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Spacing
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The maximum spacing (equal) of rebar along the specified shape edge.

    Field: Cover
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The clear cover for the rebar along the specified shape edge. Note that the cover for this
    corner bar is not specified directly, but rather is determined from the specified cover along
    the two adjacent shape edges.
    Table: Section Designer Properties 03 - Reinforcing At Shape Corners

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: Type
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of shape.

    Field: CornerID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A number identifying the shape corner to which the specified reinforcing applies.

    Page 1609 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BarSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User, the rebar size along the specified shape corner, or None if no rebar
    exists along the . If this item is User then the rebar area is taken from the BarArea
    item.Note that the cover for this corner bar is not specified directly, but rather is
    determined from the specified cover along the two adjacent shape edges.

    Field: BarArea
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The rebar area along the specified shape corner. This item is only imported when the
    BarSize item is User.
    Table: Section Designer Properties 04 - Shape I/Wide Flange

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Defined or the name of a defined.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the I/Wide Flange shape.

    Page 1610 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the I/Wide Flange shape in Section Designer.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the I/Wide Flange shape in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the I/Wide Flange shape in the Section Designer
    coordinate system.

    Field: Height
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the I/Wide Flange shape.

    Field: TopWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the top flange of the.

    Page 1611 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TopThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the top flange of the.

    Field: WebThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The web thickness of the I/Wide Flange shape.

    Field: BotWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the bottom flange of the.

    Field: BotThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the bottom flange of the.

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The counterclockwise rotation of the I/Wide Flange shape from its default orientation.

    Field: Reinforcing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if there is edge and corner reinforcing associated with theI/Wide Flange
    shape. Otherwise it is No.

    Page 1612 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RebarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the rebar in I/Wide Flange shape.This item is only
    applicable when the Reinforcing item is Yes.

    Field: ConcCover
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify how cover is to be measured in a concrete shape with rebar.
    Table: Section Designer Properties 05 - Shape Channel

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Defined or the name of a defined.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Channel shape.

    Page 1613 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Channel shape in Section Designer.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Channel shape in the Section Designer coordinate
    system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Channel shape in the Section Designer coordinate
    system.

    Field: Height
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the Channel shape.

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the Channel shape.

    Page 1614 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FlngThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The flange thickness of theChannel shape.

    Field: WebThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The web thickness of the Channel shape.

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The counterclockwise rotation of the Channel shape from its default orientation.

    Field: Flipped
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is ""Yes"" if a non-symmetrical shape is to be flipped (mirrored) about its own
    Y-axis.

    Field: Reinforcing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if there is edge and corner reinforcing associated with theChannel shape.
    Otherwise it is No.

    Field: RebarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the rebar in Channel shape.This item is only
    applicable when the Reinforcing item is Yes.

    Page 1615 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ConcCover
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify how cover is to be measured in a concrete shape with rebar.
    Table: Section Designer Properties 06 - Shape Tee

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Defined or the name of a defined.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Tee shape.

    Field: Zorder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Page 1616 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Tee shape in Section Designer.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Tee shape in the Section Designer coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Tee shape in the Section Designer coordinate system.

    Field: Height
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the Tee shape.

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the Tee shape.

    Field: FlngThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The flange thickness of theTee shape.

    Field: WebThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The web thickness of the Tee shape.

    Page 1617 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The counterclockwise rotation of the Tee shape from its default orientation.

    Field: Reinforcing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if there is edge and corner reinforcing associated with theTee shape.
    Otherwise it is No.

    Field: RebarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the rebar in Tee shape.This item is only applicable
    when the Reinforcing item is Yes.

    Field: ConcCover
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify how cover is to be measured in a concrete shape with rebar.
    Table: Section Designer Properties 07 - Shape Angle

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Page 1618 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ShapeType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Defined or the name of a defined.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Angle shape.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Angle shape in Section Designer.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Angle shape in the Section Designer coordinate
    system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Angle shape in the Section Designer coordinate
    system.

    Page 1619 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Height
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the Angle shape.

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the Angle shape.

    Field: FlngThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The flange thickness of theAngle shape.

    Field: WebThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The web thickness of the Angle shape.

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The counterclockwise rotation of the Angle shape from its default orientation.

    Field: Flipped
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is ""Yes"" if a non-symmetrical shape is to be flipped (mirrored) about its own
    Y-axis.

    Page 1620 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Reinforcing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if there is edge and corner reinforcing associated with theAngle shape.
    Otherwise it is No.

    Field: RebarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the rebar in Angle shape.This item is only
    applicable when the Reinforcing item is Yes.

    Field: ConcCover
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify how cover is to be measured in a concrete shape with rebar.
    Table: Section Designer Properties 08 - Shape Double Angle

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Defined or the name of a defined.

    Page 1621 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Double shape.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Double shape in Section Designer.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Double shape in the Section Designer coordinate
    system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Double shape in the Section Designer coordinate
    system.

    Field: Height
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the Double shape.

    Page 1622 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the Double shape. This is equal to two times the flange width of a single
    angle plus the separation distance.

    Field: FlngThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The flange thickness of theDouble shape.

    Field: WebThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The web thickness of the Double shape.

    Field: Separation
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance (space) between the webs of the two angles in theDouble shape.

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The counterclockwise rotation of the Double shape from its default orientation.
    Table: Section Designer Properties 09 - Shape Box/Tube

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Page 1623 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Defined or the name of a definedBox/Tube section.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Box/Tube shape.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Box/Tube shape in Section Designer.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Box/Tube shape in the Section Designer coordinate
    system.

    Page 1624 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Box/Tube shape in the Section Designer coordinate
    system.

    Field: Height
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the Box/Tube shape.

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the Box/Tube shape.

    Field: FlngThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The flange thickness of theBox/Tube shape.

    Field: WebThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The web thickness of the Box/Tube shape.

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The counterclockwise rotation of the Box/Tube shape from its default orientation.
    Table: Section Designer Properties 10 - Shape Pipe

    Page 1625 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Defined or the name of a definedPipe section.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Pipe shape.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Pipe shape in Section Designer.

    Page 1626 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Pipe shape in the Section Designer coordinate
    system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Pipe shape in the Section Designer coordinate
    system.

    Field: OuterDiam
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The outer diameter of thePipe shape.

    Field: WallThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The wall thickness of thePipe shape.
    Table: Section Designer Properties 11 - Shape Plate

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Page 1627 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Plate shape.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Plate shape in Section Designer.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Plate shape in the Section Designer coordinate
    system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Plate shape in the Section Designer coordinate
    system.

    Field: Thickness
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of thePlate shape.

    Page 1628 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the Plate shape.

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The counterclockwise rotation of the Plate shape from its default orientation.

    Field: Reinforcing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if there is edge and corner reinforcing associated with thePlate shape.
    Otherwise it is No.

    Field: RebarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the rebar in Plate shape.This item is only applicable
    when the Reinforcing item is Yes.

    Field: ConcCover
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify how cover is to be measured in a concrete shape with rebar.
    Table: Section Designer Properties 12 - Shape Solid Rectangle

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Page 1629 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Solid Rectangle shape.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Solid Rectangle shape in Section Designer.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Solid Rectangle shape in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Solid Rectangle shape in the Section Designer
    coordinate system.

    Page 1630 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Height
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the Solid Rectangle shape.

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the Solid Rectangle shape.

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The counterclockwise rotation of the Solid Rectangle shape from its default orientation.

    Field: Reinforcing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if there is edge and corner reinforcing associated with theSolid Rectangle
    shape. Otherwise it is No.

    Field: RebarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the rebar in Solid Rectangle shape.This item is only
    applicable when the Reinforcing item is Yes.

    Field: ConcCover
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify how cover is to be measured in a concrete shape with rebar.

    Page 1631 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ManderPlace
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify the location of the boundary between confined and unconfined
    concrete material using the Mander model.
    Table: Section Designer Properties 13 - Shape Solid Circle

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Solid Circle shape.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Solid Circle shape in Section Designer.

    Page 1632 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Solid Circle shape in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Solid Circle shape in the Section Designer coordinate
    system.

    Field: Diameter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of theSolid Circle shape.

    Field: Reinforcing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if there is edge and corner reinforcing associated with theSolid Circle
    shape. Otherwise it is No.

    Field: RebarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the rebar in Solid Circle shape.This item is only
    applicable when the Reinforcing item is Yes.

    Field: NumBars
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of reinforcing bars equally spaced around the perimeter ofthe Solid Circle
    shape. This item is only applicable when the Reinforcing item is Yes.

    Page 1633 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle in degrees measured counterclockwise from the Section Designer X-axis tothe
    first rebar in the Solid Circle shape. This item is only applicable when the Reinforcing
    item is Yes.

    Field: Cover
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The clear cover for the rebar around the perimeter ofthe Solid Circle shape. This item is
    only applicable when the Reinforcing item is Yes.

    Field: BarSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User, the rebar size around the perimeter of theSolid Circle shape, or None.
    This item is only applicable when the Reinforcing item is Yes.

    Field: BarArea
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The rebar area along the specified shape SD_SHAPETYPE_CIRCLE. This item is only
    imported when the BarSize item is User.

    Field: ConcCover
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify how cover is to be measured in a concrete shape with rebar.

    Field: ManderPlace
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify the location of the boundary between confined and unconfined
    concrete material using the Mander model.
    Table: Section Designer Properties 14 - Shape Solid Segment

    Page 1634 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Solid Segment shape.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Solid Segment shape in Section Designer.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Solid Segment shape in the Section Designer
    coordinate system.

    Page 1635 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Solid Segment shape in the Section Designer
    coordinate system.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle that defines the arc length of the.

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle in degrees measured counterclockwise from the Section Designer X-axis to a
    radial line that bisects the arc defining the Solid Segment shape.

    Field: Radius
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The radius of the circular arc defining the outer edge of the Solid Segment shape.
    Table: Section Designer Properties 15 - Shape Solid Sector

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Page 1636 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Solid Sector shape.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Solid Sector shape in Section Designer.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Solid Sector shape in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Solid Sector shape in the Section Designer
    coordinate system.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle that defines the arc length of the.

    Page 1637 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle in degrees measured counterclockwise from the Section Designer X-axis to a
    radial line that bisects the arc defining the Solid Sector shape.

    Field: Radius
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The radius of the circular arc defining the outer edge of the Solid Sector shape.
    Table: Section Designer Properties 16 - Shape Polygon

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: X
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the point in the Section Designer coordinate system.

    Field: Y
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the point in the Section Designer coordinate system.

    Page 1638 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Radius
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The radius of the fillet that occurs at the specified point (corner) in the polygon.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Polygon shape.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: FillColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Polygon shape in Section Designer.

    Field: Reinforcing
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if there is edge and corner reinforcing associated with thePolygon shape.
    Otherwise it is No.

    Field: RebarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the rebar in Polygon shape.This item is only
    applicable when the Reinforcing item is Yes.

    Page 1639 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ConcCover
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify how cover is to be measured in a concrete shape with rebar.
    Table: Section Designer Properties 17 - Shape Reinforcing Single

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Reinforcing Single shape.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Reinforcing Single shape in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Reinforcing Single shape in the Section Designer
    coordinate system.

    Page 1640 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BarSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User, the rebar size of theReinforcing Single shape, or None.

    Field: BarArea
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The rebar area along the specified shape SD_SHAPETYPE_SINGLEBAR. This item is
    only imported when the BarSize item is User.
    Table: Section Designer Properties 18 - Shape Reinforcing Line

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Reinforcing Line shape.

    Field: X1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate at end point 1 of the Reinforcing Line shape in the Section Designer
    coordinate system.

    Page 1641 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Y1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate at end point 1 of the Reinforcing Line shape in the Section Designer
    coordinate system.

    Field: X2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate at end point 2 of the Reinforcing Line shape in the Section Designer
    coordinate system.

    Field: Y2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate at end point 2 of the Reinforcing Line shape in the Section Designer
    coordinate system.

    Field: Spacing
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The maximum spacing (equal) of rebar for the Reinforcing Line shape.

    Field: BarSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User, the rebar size for all bars in the Reinforcing Line shape, or None.

    Field: BarArea
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The rebar area along the specified shape SD_SHAPETYPE_LINEBAR. This item is only
    imported when the BarSize item is User.

    Page 1642 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EndBars
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if end bars exist for the Reinforcing Line shape. Otherwise it is No. End
    bars are bars occurring at the end points of the line that defines the shape.
    Table: Section Designer Properties 19 - Shape Reinforcing Rectangle

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Reinforcing Rectangle shape.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Reinforcing Rectangle shape in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Reinforcing Rectangle shape in the Section Designer
    coordinate system.

    Page 1643 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Height
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the Reinforcing Rectangle shape measured to the outer face of the rebar.

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the Reinforcing Rectangle shape measured to the outer face of the rebar.

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The counterclockwise rotation of the Reinforcing Rectangle shape from its default
    orientation.
    Table: Section Designer Properties 20 - Shape Reinforcing Circle

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Reinforcing Circle shape.

    Page 1644 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Reinforcing Circle shape in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Reinforcing Circle shape in the Section Designer
    coordinate system.

    Field: Diameter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the Reinforcing Circle shape measured to the outer face of the rebar.

    Field: NumBars
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of reinforcing bars equally spaced around the perimeter of Reinforcing Circle
    shape. This item is only applicable when the Reinforcing item is Yes.

    Field: Rotation
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle in degrees measured counterclockwise from the Section Designer X-axis to the
    first rebar in the Reinforcing Circle shape. This item is only applicable when the
    Reinforcing item is Yes.

    Field: BarSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The rebar size around the perimeter of theReinforcing Circle shape, or None.

    Page 1645 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BarArea
    Field is Imported: Yes
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The rebar area along the specified shape SD_SHAPETYPE_CIRCLEBAR. This item is
    only imported when the BarSize item is User.
    Table: Section Designer Properties 21 - Shape Reference Line

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: X1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate at end point 1 of the Reference Line shape in the Section Designer
    coordinate system.

    Field: Y1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate at end point 1 of the Reference Line shape in the Section Designer
    coordinate system.

    Field: X2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate at end point 2 of the Reference Line shape in the Section Designer
    coordinate system.

    Page 1646 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Y2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate at end point 2 of the Reference Line shape in the Section Designer
    coordinate system.
    Table: Section Designer Properties 22 - Shape Reference Circle

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Reference Circle shape in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Reference Circle shape in the Section Designer
    coordinate system.

    Field: Diameter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of theReference Circle shape.
    Table: Section Designer Properties 23 - Shape Caltrans Square

    Page 1647 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete material property associated with the Caltrans Square.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Caltrans Square shape in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Caltrans Square shape in the Section Designer
    coordinate system.

    Page 1648 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Height
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the section at the top of the column. This item must be greater than or equal
    to the BaseHeight item.

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the section at the top of the column. This item must be greater than or equal
    to the BaseWidth item.

    Field: BaseHeight
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the section at the base of the column. The number of cores that can fit into
    the column is based on this height.

    Field: BaseWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the section at the base of the column. The number of cores that can fit into
    the column is based on this width.

    Field: Chamfer
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The horizontal and vertical dimension of the corner chamfer.

    Field: CaseThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the column steel casing. A zero value for this item means no casing is
    provided.

    Page 1649 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CaseFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This factor is typically between 0 and 1. It is the fraction of the casing to be considered as
    longitudinal steel.

    Field: CaseMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The casing material property associated with the Caltrans Square.

    Field: NumCores
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of cores in the column. This can be 1, 2 or 3.

    Field: NumRings
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of reinforcement rings in each core. This can be 1, 2 or 3.

    Field: CoverRing1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum clear cover for reinforcement ring 1.

    Field: CoverRing2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum clear cover for reinforcement ring 2.

    Field: CoverRing3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum clear cover for reinforcement ring 3.
    Page 1650 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ConcCover
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify how cover is to be measured in a concrete shape with rebar.

    Field: ManderPlace
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify the location of the boundary between confined and unconfined
    concrete material using the Mander model.

    Field: OuterColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Caltrans Square shape Outer part in Section
    Designer.

    Field: CoreColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Caltrans Square shape Core part in Section
    Designer.

    Field: OtherColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Caltrans Square shape Other part in Section
    Designer.

    Field: OuterMander
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete mander model type for the Outer part of the Caltrans Square shape in Section
    Designer.

    Page 1651 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoreMander
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete mander model type for the Core part of the Caltrans Square shape in Section
    Designer.

    Field: OtherMander
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete mander model type for the Other part of the Caltrans Square shape in Section
    Designer.
    Table: Section Designer Properties 24 - Shape Caltrans Circle

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete material property associated with the Caltrans Circle.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Page 1652 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Caltrans Circle shape in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Caltrans Circle shape in the Section Designer
    coordinate system.

    Field: Height
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the section at the top of the column. This item must be greater than or equal
    to the BaseHeight item.

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the section at the top of the column. This item must be greater than or equal
    to the BaseWidth item.

    Field: BaseHeight
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the section at the base of the column. The number of cores that can fit into
    the column is based on this height.

    Field: BaseWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the section at the base of the column. The number of cores that can fit into
    the column is based on this width.

    Page 1653 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CaseThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the column steel casing. A zero value for this item means no casing is
    provided.

    Field: CaseFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This factor is typically between 0 and 1. It is the fraction of the casing to be considered as
    longitudinal steel.

    Field: CaseMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The casing material property associated with the Caltrans Circle.

    Field: NumCores
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of cores in the column. This can be 1, 2 or 3.

    Field: NumRings
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of reinforcement rings in each core. This can be 1, 2 or 3.

    Field: CoverRing1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum clear cover for reinforcement ring 1.

    Page 1654 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoverRing2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum clear cover for reinforcement ring 2.

    Field: CoverRing3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum clear cover for reinforcement ring 3.

    Field: ConcCover
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify how cover is to be measured in a concrete shape with rebar.

    Field: ManderPlace
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify the location of the boundary between confined and unconfined
    concrete material using the Mander model.

    Field: OuterColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Caltrans Circle shape Outer part in Section
    Designer.

    Field: CoreColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Caltrans Circle shape Core part in Section
    Designer.

    Page 1655 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OtherColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Caltrans Circle shape Other part in Section
    Designer.

    Field: OuterMander
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete mander model type for the Outer part of the Caltrans Circle shape in Section
    Designer.

    Field: CoreMander
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete mander model type for the Core part of the Caltrans Circle shape in Section
    Designer.

    Field: OtherMander
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete mander model type for the Other part of the Caltrans Circle shape in Section
    Designer.
    Table: Section Designer Properties 25 - Shape Caltrans Hexagon

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Page 1656 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete material property associated with the Caltrans Hexagon.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Caltrans Hexagon shape in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Caltrans Hexagon shape in the Section Designer
    coordinate system.

    Field: Height
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the section at the top of the column. This item must be greater than or equal
    to the BaseHeight item.

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the section at the top of the column. This item must be greater than or equal
    to the BaseWidth item.

    Page 1657 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BaseHeight
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the section at the base of the column. The number of cores that can fit into
    the column is based on this height.

    Field: BaseWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the section at the base of the column. The number of cores that can fit into
    the column is based on this width.

    Field: CaseThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the column steel casing. A zero value for this item means no casing is
    provided.

    Field: CaseFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This factor is typically between 0 and 1. It is the fraction of the casing to be considered as
    longitudinal steel.

    Field: CaseMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The casing material property associated with the Caltrans Hexagon.

    Field: NumCores
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of cores in the column. This can be 1, 2 or 3.

    Page 1658 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumRings
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of reinforcement rings in each core. This can be 1, 2 or 3.

    Field: CoverRing1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum clear cover for reinforcement ring 1.

    Field: CoverRing2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum clear cover for reinforcement ring 2.

    Field: CoverRing3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum clear cover for reinforcement ring 3.

    Field: ConcCover
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify how cover is to be measured in a concrete shape with rebar.

    Field: ManderPlace
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify the location of the boundary between confined and unconfined
    concrete material using the Mander model.

    Page 1659 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OuterColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Caltrans Hexagon shape Outer part in Section
    Designer.

    Field: CoreColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Caltrans Hexagon shape Core part in Section
    Designer.

    Field: OtherColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Caltrans Hexagon shape Other part in Section
    Designer.

    Field: OuterMander
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete mander model type for the Outer part of the Caltrans Hexagon shape in
    Section Designer.

    Field: CoreMander
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete mander model type for the Core part of the Caltrans Hexagon shape in
    Section Designer.

    Field: OtherMander
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete mander model type for the Other part of the Caltrans Hexagon shape in
    Section Designer.
    Table: Section Designer Properties 26 - Shape Caltrans Octagon

    Page 1660 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: ShapeMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete material property associated with the Caltrans Octagon.

    Field: ZOrder
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item represents the drawing order of a solid shapes from back to front. In the case of
    partially overlapping shapes, the part of one shape that is behind another shape is not used
    for the calculation of properties.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the Caltrans Octagon shape in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the Caltrans Octagon shape in the Section Designer
    coordinate system.

    Page 1661 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Height
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the section at the top of the column. This item must be greater than or equal
    to the BaseHeight item.

    Field: Width
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the section at the top of the column. This item must be greater than or equal
    to the BaseWidth item.

    Field: BaseHeight
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The height of the section at the base of the column. The number of cores that can fit into
    the column is based on this height.

    Field: BaseWidth
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The width of the section at the base of the column. The number of cores that can fit into
    the column is based on this width.

    Field: CaseThick
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the column steel casing. A zero value for this item means no casing is
    provided.

    Field: CaseFact
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This factor is typically between 0 and 1. It is the fraction of the casing to be considered as
    longitudinal steel.

    Page 1662 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CaseMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The casing material property associated with the Caltrans Octagon.

    Field: NumCores
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of cores in the column. This can be 1, 2 or 3.

    Field: NumRings
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of reinforcement rings in each core. This can be 1, 2 or 3.

    Field: CoverRing1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum clear cover for reinforcement ring 1.

    Field: CoverRing2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum clear cover for reinforcement ring 2.

    Field: CoverRing3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The minimum clear cover for reinforcement ring 3.

    Field: ConcCover
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify how cover is to be measured in a concrete shape with rebar.

    Page 1663 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ManderPlace
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is to specify the location of the boundary between confined and unconfined
    concrete material using the Mander model.

    Field: OuterColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Caltrans Octagon shape Outer part in Section
    Designer.

    Field: CoreColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Caltrans Octagon shape Core part in Section
    Designer.

    Field: OtherColor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The fill color used when displaying the Caltrans Octagon shape Other part in Section
    Designer.

    Field: OuterMander
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete mander model type for the Outer part of the Caltrans Octagon shape in
    Section Designer.

    Field: CoreMander
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete mander model type for the Core part of the Caltrans Octagon shape in
    Section Designer.

    Page 1664 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OtherMander
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The concrete mander model type for the Other part of the Caltrans Octagon shape in
    Section Designer.
    Table: Section Designer Properties 27 - Caltrans Longitudinal Rebar

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: Region
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Core1, Core2, Core3, Interlock1, or Interlock2 indicating the region
    considered.

    Field: Ring
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is either 1, 2 or 3 the ring considered in the specified region.

    Field: LBarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Caltrans shape Longitudinal Rebar.

    Page 1665 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NumBuns
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The number of rebar bundles in the specified ring in the specified region.

    Field: BunType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 1 Bar, 2 Bar Perimeter, 2 Bar Radial, or 3 Bar Triangle indicating the rebar
    bundle type.

    Field: BunBarSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Area or a rebar size for the bundled bars. User Area means that a rebar
    area is specified instead of a rebar size.

    Field: BunBarArea
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The area of a bundled bar. This item only applies when the BunBarSize item is User Area.
    Table: Section Designer Properties 28 - Caltrans Longitudinal Tendons

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Page 1666 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TendonMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Caltrans shape Longitudinal Tendons.

    Field: XCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the center of the prestressing tendon in the Section Designer
    coordinate system.

    Field: YCenter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the center of the prestressing tendon in the Section Designer
    coordinate system.

    Field: Area
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The cross-sectional area of the prestressing tendon.

    Field: Tension
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The tension force in the prestressing tendon.
    Table: Section Designer Properties 29 - Caltrans Confinement Rebar

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Page 1667 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ShapeName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The shape name.

    Field: Region
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Core1, Core2, or Core3 indicating the region considered.

    Field: Ring
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This is either 1, 2 or 3 the ring considered in the specified region.

    Field: CnfBarMat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the Caltrans shape Confinement Rebar.

    Field: CnfType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Hoop, Spiral, Ties or Wire indicating the confinement type.

    Field: CnfBarSize
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either User Area or a rebar size for the confinement bars. User Area means that a
    rebar area is specified instead of a rebar size.

    Page 1668 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CnfBarArea
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The area of a confinement bar. This item only applies when the CnfBarSize item is User
    Area.

    Field: CnfLngSpcg
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The longitudinal spacing of the confinement rebar.
    Table: Section Designer Properties 30 - Fiber General

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: NumFibersD2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The number of fiber grid spaces in axis-2 direction.

    Field: NumFibersD3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The number of fiber grid spaces in axis-3 direction.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Cartesian or Cylindrical coordinate system.

    Page 1669 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GridAngle
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The angle of fiber gridline with respect to the coordinate system of Section Designer.

    Field: LumpRebar
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the rebars within each fiber grid are lumped.

    Field: FiberPMM
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the PMM interaction surface is calculated using the fiber model.

    Field: FiberMC
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the Moment-Curvature curve is calculated using the fiber model.
    Table: Section Designer Properties 31 - Stress Point

    Field: SectionName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a Section Designer section that has been defined in the Frame Section
    Properties 01 - General table.

    Field: PointIndex
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The stress point index.

    Page 1670 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PointName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The label of this stress point.

    Field: X
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The X coordinate of the stress point in the Section Designer coordinate system.

    Field: Y
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The Y coordinate of the stress point in the Section Designer coordinate system.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The material property associated with the stress point.

    Field: S12FactV2
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The stress factor for calculating the shear stress S12 due to frame shear force V2. It is
    equal to S12 times I33 divided by V2.

    Field: S12FactV3
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The stress factor for calculating the shear stress S12 due to frame shear force V3. It is
    equal to S12 times I22 divided by V3.

    Page 1671 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: S12FactT
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The stress factor for calculating the shear stress S12 due to frame torsional moment T. It is
    equal to S12 times J divided by T.

    Field: S13FactV2
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The stress factor for calculating the shear stress S13 due to frame shear force V2. It is
    equal to S13 times I33 divided by V2.

    Field: S13FactV3
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The stress factor for calculating the shear stress S13 due to frame shear force V3. It is
    equal to S13 times I22 divided by V3.

    Field: S13FactT
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The stress factor for calculating the shear stress S13 due to frame torsional moment T. It is
    equal to S13 times J divided by T.
    Table: Solid Auto Mesh Assignments

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Field: AutoMesh
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the solid object is to be (internally) automatically meshed by the
    program for analysis.

    Page 1672 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MeshType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Number of Elements or Maximum Size indicating the type of
    automaticmeshing specified.
    Number of Elements means that the solid object is meshed into Number1 by Number2 by
    Number3 elements.
    Maximum Size means that the solid object is meshed into elements no larger than the size
    specified by Max1, Max2 and Max3.

    Field: Number1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    If the AutoMesh item is Yes, and the MeshType item is Number of Elements then the solid
    object is to be (internally) automatically meshed into Number1 by Number2 by Number3
    elements by the program for analysis.
    Number1 is the number of elements along the edge of the solid object from Point 1 to
    Point 2 of the solid object.
    Number2 is the number of elements along the edge of the solid object from Point 1 to
    Point 3 of the solid object.
    Number3 is the number of elements along the edge of the solid object from Point 1 to
    Point 5 of the solid object.

    Field: Number2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    If the AutoMesh item is Yes, and the MeshType item is Number of Elements then the solid
    object is to be (internally) automatically meshed into Number1 by Number2 by Number3
    elements by the program for analysis.
    Number1 is the number of elements along the edge of the solid object from Point 1 to
    Point 2 of the solid object.
    Number2 is the number of elements along the edge of the solid object from Point 1 to
    Point 3 of the solid object.
    Number3 is the number of elements along the edge of the solid object from Point 1 to
    Point 5 of the solid object.

    Page 1673 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Number3
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    If the AutoMesh item is Yes, and the MeshType item is Number of Elements then the solid
    object is to be (internally) automatically meshed into Number1 by Number2 by Number3
    elements by the program for analysis.
    Number1 is the number of elements along the edge of the solid object from Point 1 to
    Point 2 of the solid object.
    Number2 is the number of elements along the edge of the solid object from Point 1 to
    Point 3 of the solid object.
    Number3 is the number of elements along the edge of the solid object from Point 1 to
    Point 5 of the solid object.

    Field: Max1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    If the AutoMesh item is Yes, and the MeshType item is Maximum Size then the solid
    object is to be (internally) automatically meshed into elements no larger than the size
    specified by Max1, Max2 and Max3.
    Max1 is the maximum size of elements along the edge of the solid object from Point 1 to
    Point 2 of the solid object.
    Max2 is the maximum size of elements along the edge of the solid object from Point 1 to
    Point 3 of the solid object.
    Max3 is the maximum size of elements along the edge of the solid object from Point 1 to
    Point 5 of the solid object.

    Field: Max2
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    If the AutoMesh item is Yes, and the MeshType item is Maximum Size then the solid
    object is to be (internally) automatically meshed into elements no larger than the size
    specified by Max1, Max2 and Max3.
    Max1 is the maximum size of elements along the edge of the solid object from Point 1 to
    Point 2 of the solid object.
    Max2 is the maximum size of elements along the edge of the solid object from Point 1 to
    Point 3 of the solid object.
    Page 1674 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Max3 is the maximum size of elements along the edge of the solid object from Point 1 to
    Point 5 of the solid object.

    Field: Max3
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    If the AutoMesh item is Yes, and the MeshType item is Maximum Size then the solid
    object is to be (internally) automatically meshed into elements no larger than the size
    specified by Max1, Max2 and Max3.
    Max1 is the maximum size of elements along the edge of the solid object from Point 1 to
    Point 2 of the solid object.
    Max2 is the maximum size of elements along the edge of the solid object from Point 1 to
    Point 3 of the solid object.
    Max3 is the maximum size of elements along the edge of the solid object from Point 1 to
    Point 5 of the solid object.

    Field: AddSupport
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Yes means a restraint degree of freedom (or constraint) is to be added to new joints along
    the edges of the solid object if both adjacent corners have that degree of freedom
    restrained (constrained). No mean no additional restraints (constraints) are added. This
    item only applies if the object is to be automatically meshed.

    Field: AddSuppSurf
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Yes means a restraint degree of freedom (or constraint) is to be added to new joints on the
    surfaces of the solid object if all four corners of the surface have that degree of freedom
    restrained (constrained). No mean no additional restraints (constraints) are added. This
    item only applies if the object is to be automatically meshed.
    Table: Solid Bridge Object Flags

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.
    Page 1675 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the solid object is automatically created from a bridge object.
    Otherwise it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this solid object is associated.

    Field: BOSpan
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the span in the bridge object with which this solid object is associated.

    Field: CompType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Top Slab, Bottom Slab or Girder indicating the portion of the bridge object
    with which this solid object is associated.

    Field: StartSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The station along the bridge object at which the specified solid starts.

    Field: EndSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The station along the bridge object at which the specified solid ends.
    Table: Solid Edge Constraint Assignments

    Page 1676 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Field: Constrained
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    Yes means that line constraints are automatically applied to the edges of the solid object.
    Table: Solid Loads - Gravity

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the gravity loads are defined.

    Field: MultiplierX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the X-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.

    Page 1677 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MultiplierY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the Y-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.

    Field: MultiplierZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the Z-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.
    Table: Solid Loads - Pore Pressure

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Pressure
    Field is Imported: Yes
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    The pore pressure load applied to the specified face of the Solid object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified pressure. If no joint
    pattern is specified then this item is reported as None.
    Table: Solid Loads - Strain

    Page 1678 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The solid object local component to which the specified strain load is applied. This is
    either Strain11, Strain22, Strain33, Strain12, Strain13 or Strain23.

    Field: Strain
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strain load applied to the specified component of the object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified strain or curvature. If
    no joint pattern is specified then this item is reported as None.
    Table: Solid Loads - Surface Pressure

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Page 1679 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Face
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The face of the Solid object to which the pressure load is applied.

    Field: Pressure
    Field is Imported: Yes
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    The surface pressure load applied to the specified face of the Solid object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified pressure. If no joint
    pattern is specified then this item is reported as None.
    Table: Solid Loads - Temperature

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Page 1680 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Temp
    Field is Imported: Yes
    Format: Temperature Change (Forces section of form)
    Units: Temp
    temperature Label of the load pattern to which the specified auto seismic load applies
    Solid object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified temperature. If no joint
    pattern is specified then this item is reported as None.
    Table: Solid Local Axes Assignments 1 - Typical

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the solid object.

    Field: AngleA
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    AngleA, AngleB and AngleC define the rotation of the solid local coordinate system
    relative to the coordinate system determined from the reference vectors. In the case where
    the default reference vectors are used, the angles define the orientation of the local
    coordinate system with respect to the global axes.
    The orientation of the local coordinate system is obtained according to the following
    procedure: (1) The local system is first rotated about its 3 axis by AngleA. (2) The local
    system is next rotated about its resulting +2 axis by AngleB. (3) The local system is lastly
    rotated about its resulting +1 axis by AngleC. Note that the order in which these rotations
    are performed is important.

    Field: AngleB
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    AngleA, AngleB and AngleC define the rotation of the solid local coordinate system
    relative to the coordinate system determined from the reference vectors. In the case where
    the default reference vectors are used, the angles define the orientation of the local
    coordinate system with respect to the global axes.
    Page 1681 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    The orientation of the local coordinate system is obtained according to the following
    procedure: (1) The local system is first rotated about its 3 axis by AngleA. (2) The local
    system is next rotated about its resulting +2 axis by AngleB. (3) The local system is lastly
    rotated about its resulting +1 axis by AngleC. Note that the order in which these rotations
    are performed is important.

    Field: AngleC
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    AngleA, AngleB and AngleC define the rotation of the solid local coordinate system
    relative to the coordinate system determined from the reference vectors. In the case where
    the default reference vectors are used, the angles define the orientation of the local
    coordinate system with respect to the global axes.
    The orientation of the local coordinate system is obtained according to the following
    procedure: (1) The local system is first rotated about its 3 axis by AngleA. (2) The local
    system is next rotated about its resulting +2 axis by AngleB. (3) The local system is lastly
    rotated about its resulting +1 axis by AngleC. Note that the order in which these rotations
    are performed is important.

    Field: AdvanceAxes
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if an advanced method is used to define the local axes reference vectors
    for the solid object. Otherwise it is No meaning that the default reference vectors are
    used.
    In the default system the solid object positive local 1, 2 and 3 axes are parallel to the
    global positive X, Y and Z axes, respectively.
    In the advanced system the solid object local axes are defined with respect to user-defined
    reference vectors. Note that when the advanced system is used, the specified Angle is
    applied to the local axes orientation defined by the user specified reference vectors.
    Table: Solid Local Axes Assignments 2 - Advanced

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the solid object.

    Page 1682 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LocalPlane
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item indicates the local plane that is to be determined by the plane reference vector.
    It is either 12, 13, 21, 23, 31, or 32.

    Field: AxOption1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Coord Dir, Two Joints or User Vector indicating the first method used to
    determine the axial reference vector.

    Field: AxCoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system used to define the axial reference vector coordinate direction and
    the axial user vector.

    Field: AxCoordDir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Axial coordinate direction taken at the joint in the specified coordinate system and used to
    define the axis reference vector. It may be one of +X, +Y, +Z, +CR, CA, +CZ, +SB, +SA,
    +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Field: AxVecJt1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    AxVecJt1 and AxVecJt2 are the labels of two joints that define the axis reference vector.
    If one of these items is reported as None then it means the center of the solid object. If
    both of these items is reported as None then this option is not used to define the axis
    reference vector.

    Page 1683 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AxVecJt2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    AxVecJt1 and AxVecJt2 are the labels of two joints that define the axis reference vector.
    If one of these items is reported as None then it means the center of the solid object. If
    both of these items is reported as None then this option is not used to define the axis
    reference vector.

    Field: PlOption1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Coord Dir, Two Joints or User Vector indicating the first method used to
    determine the plane reference vector.

    Field: PlCoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system used to define the plane reference vector coordinate directions and
    the plane user vector.

    Field: CoordDir1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    primary coordinate direction taken at the joint in the specified coordinate system. It is used
    to determine the plane reference vector. It may be one of +X, +Y, +Z, +CR, +CA, +CZ,
    +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Field: CoordDir2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    secondary coordinate direction taken at the joint in the specified coordinate system. It is
    used to determine the plane reference vector. It may be one of +X, +Y, +Z, +CR, +CA,
    +CZ, +SB, +SA, +SR, -X, -Y, -Z, -CR, -CA, -CZ, -SB, -SA, -SR.

    Page 1684 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlVecJt1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    PlVecJt1 and PlVecJt2 are the labels of two joints that define the plane reference vector.
    Either of these items may be specified as None to indicate the center of the solid object. If
    both PlVecJt1 and PlVecJt2 are specified as None then they are not used to define the
    plane reference vector.

    Field: PlVecJt2
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    PlVecJt1 and PlVecJt2 are the labels of two joints that define the plane reference vector.
    Either of these items may be specified as None to indicate the center of the solid object. If
    both PlVecJt1 and PlVecJt2 are specified as None then they are not used to define the
    plane reference vector.

    Field: AxVecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    X direction component of the axis reference vector in the coordinate system defined by the
    CoordSys item.

    Field: AxVecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Y direction component of the axis reference vector in the coordinate system defined by the
    CoordSys item.

    Field: AxVecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Z direction component of the axis reference vector in the coordinate system defined by the
    CoordSys item.

    Page 1685 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PlVecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    X direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.

    Field: PlVecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Y direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.

    Field: PlVecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Z direction component of the plane reference vector in the coordinate system defined by
    the CoordSys item.
    Table: Solid Material Temperatures

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The Solid object material temperature.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified temperature. If no joint
    pattern is specified then this item is reported as None.
    Table: Solid Property Assignments

    Page 1686 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Field: SolidProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the solid property assigned to the solid section.
    Table: Solid Property Definitions

    Field: SolidProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the solid property assigned to the solid section.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property assigned to the solid section.

    Field: MatAngleA
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    material angle A Label of the load pattern to which the specified auto seismic load applies
    Solid object.

    Field: MatAngleB
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    material angle B Label of the load pattern to which the specified auto seismic load applies
    Solid object.

    Page 1687 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MatAngleC
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    material angle C Label of the load pattern to which the specified auto seismic load applies
    Solid object.

    Field: InComp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if incompatible bending modes are included in the stiffness formulation.
    Otherwise it is No.
    In general, incompatible modes significantly improve the bending behavior of the object.

    Field: Color
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color associated with the
    property.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified solid property.

    Field: Notes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    User notes for the specified solid property.

    Page 1688 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalWt
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    Total weight of all objects in the model that are assigned the specified solid property.

    Field: TotalMass
    Field is Imported: No
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    Total mass of all objects in the model that are assigned the specified solid property.
    Table: Solid Property Definitions - Bridge Object Flags

    Field: SolidProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the solid section property.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the solid property is an automatically created bridge section. Otherwise
    it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this solid property is associated.
    Table: Solid Spring Assignments

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Page 1689 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Simple or Link Property indicating the type of spring specified.

    Field: Stiffness
    Field is Imported: Yes
    Format: Trans Stiffness/Area (Stiffness section of form)
    Units: Force/Length/Length2
    Spring stiffness per unit area on the specified face of the solid object in the direction
    specified. This item only applies when the Type item is Simple.

    Field: SimpleType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Tension and Compression, Compression Only, or Tension Only indicating
    the type of simple spring specified.

    Field: LinkProp
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the link property assigned to the spring. This item only applies when the
    Type item is Link Property.

    Field: Face
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The face of the solid object to which the specified springs are applied.

    Field: Dir1Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Object Axes, Normal To Face, or User Vector indicating the method used to
    define the tension direction for simple springs or the link local 1-axis direction for Link
    Property springs.

    Page 1690 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Dir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either -3, -2, -1, 1, 2 or 3 indicating the tension direction for simple springs or the
    link local 1-axis direction for Link Property springs. The -3, -2, -1, 1, 2 and 3 items refer
    to the solid object local axes directions.
    This item only applies when the Dir1Type item is Object Axes.

    Field: NormalDir
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Inward, or Outward indicating the orientation of the tension direction for
    simple springs or the link local 1-axis direction for Link Property springs when they are
    oriented normal to a face.
    This item only applies when the Dir1Type item is Normal To Face.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The coordinate system in which a user vector is specified to define the tension direction
    for simple springs or the link local 1-axis direction for Link Property springs.
    This item only applies when the Dir1Type item is User Vector.

    Field: VecX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    VecX, VecY and VecZ define the X, Y and Z (or 1, 2 and 3) components of the user
    specified direction vector for the tension direction for simple springs or the link local 1axis direction for Link Property springs. VecX, VecY and VecZ are in the coordinate
    system specified by the CoordSys item.
    The direction cosine for the section-cut local 3 axis relative to the Global %s axis. The
    local 3 axis is normal to the local 1 and 2 axes, following the right-hand rule. It lies in the
    plane of the deck (with super-elevation), and points toward the right edge of deck.

    Page 1691 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VecY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    VecX, VecY and VecZ define the X, Y and Z (or 1, 2 and 3) components of the user
    specified direction vector for the tension direction for simple springs or the link local 1axis direction for Link Property springs. VecX, VecY and VecZ are in the coordinate
    system specified by the CoordSys item.
    The direction cosine for the section-cut local 3 axis relative to the Global %s axis. The
    local 3 axis is normal to the local 1 and 2 axes, following the right-hand rule. It lies in the
    plane of the deck (with super-elevation), and points toward the right edge of deck.

    Field: VecZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    VecX, VecY and VecZ define the X, Y and Z (or 1, 2 and 3) components of the user
    specified direction vector for the tension direction for simple springs or the link local 1axis direction for Link Property springs. VecX, VecY and VecZ are in the coordinate
    system specified by the CoordSys item.
    The direction cosine for the section-cut local 3 axis relative to the Global %s axis. The
    local 3 axis is normal to the local 1 and 2 axes, following the right-hand rule. It lies in the
    plane of the deck (with super-elevation), and points toward the right edge of deck.

    Field: Axis2Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle in degrees that the link local 2 axis is rotated from its default orientation. This
    item only applies when the Type item is Link Property.
    Table: Solid Vehicle Response Component Overwrites

    Field: Solid
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Page 1692 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Usage
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either AASHTO HL - Superstructure, AASHTO HL - Reaction, or AASHTO H &
    HS Superstructure indicating the vehicle type and structural member type to which the
    overwrite applies.
    AASHTO HL - Superstructure refers to the superstructure negative moments over
    supports and applies to AASHTO H, HS and HL loading.
    AASHTO HL - Reaction refers to reactions at interior supports (piers) and applies only to
    AASHTO HL loaoding.
    AASHTO H & HS Superstructure refers to superstructure moments (positive or negative)
    and applies to AASHTO H and HS loading.

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either S11, S22, S33, S12, S13, or S23 indicating the output component to which
    the overwrite applies.

    Field: Status
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Do Not Use, Use Positive Values, Use Negative Values, or Use All Values
    indicating the portion of the output for the specified component to which the overwrite
    applies.
    Table: Steel Frame Design Lateral Displacement Targets

    Field: StaticCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The static linear load case for which the specified lateral displacement targets apply.

    Field: PointObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The point object at which the specified lateral displacement target applies.
    Page 1693 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxDispl
    Field is Imported: Yes
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The target displacement for the specified static linear load case at the specified point
    object.

    Field: Active
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the specified target lateral displacements are active. Otherwise it is No.
    Table: Steel Frame Design Time Period Targets

    Field: ModeNum
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The mode number to which the specified time period target applies.

    Field: Period
    Field is Imported: Yes
    Format: Period (Time-Related section of form)
    Units: Sec
    The target period for the specified modal load case.

    Field: ModalCase
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The modal load case for which the specified time period targets apply.

    Field: Active
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the specified target time periods are active. Otherwise it is No.
    Table: Tables Automatically Saved After Analysis

    Page 1694 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SaveFile
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if an Microsoft Access or Excel tabular file is to be saved after an analysis
    is complete. Otherwise it is No.

    Field: FileName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The file name and extension to be used for the automatically created tabular file. The file
    name and extension to be used for the automatically created tabular file. Do not include a
    path with the file name; the file is automatically created in the same directory as the model
    file. Examples of the file name expected here include MyModel.mdb and MyModel.xls.
    This item is only applicable when the SaveFile item is Yes.
    If the file name extension is xls then a Microsoft Excel file is created, otherwise a
    Microsoft Access File is created.

    Field: NamedSet
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either None or the name of a defined database tables named set. Only tables that
    are in the specified named set will be included in the automatically created tabular file. If
    None is selected then a tabular file is not created. This item is only applicable when the
    SaveFile item is Yes.

    Field: Group
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of a defined group. In general data is only provided for objects included in this
    group. Specify group ALL to include data for all groups. This item is only applicable
    when the SaveFile item is Yes.
    Table: Tendon Bridge Object Flags

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Page 1695 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the tendon object is automatically created from a bridge object.
    Otherwise it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this tendon object is associated.

    Field: StartSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The station along the bridge object at which the specified tendon starts.

    Field: EndSta
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The station along the bridge object at which the specified tendon ends.
    Table: Tendon Layout Data 01 - General

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Field: MaxDiscLen
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The maximum discretization length for the tendon object.

    Page 1696 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadGroup
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The tendon transfers its load to any object that is in the specified load group.

    Field: NumSegs
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The total number of tendon layout segments. The first segment always specifies the start
    of the tendon.
    Table: Tendon Layout Data 02 - Segments

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Field: SegType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The segment type for the specified segment of the tendon. This is one of the following:
    Start of Tendon
    Linear
    Parabola Intermediate Point
    Parabola End PointCircle Intermediate Point
    Circle End Point.

    Field: XGlobal
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the tendon at the end of the specified segment.

    Field: YGlobal
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the tendon at the end of the specified segment.
    Page 1697 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ZGlobal
    Field is Imported: Yes
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the tendon at the end of the specified segment.
    Table: Tendon Loads - Deformation

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: IncludeU1
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a deformation is specified for the U1 degree of freedom. Otherwise it is
    No.

    Field: U1
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item is the deformation specified for the U1 degree of freedom.
    Table: Tendon Loads - Gravity

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Page 1698 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: CoordSys
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the coordinate system in which the gravity loads are defined.

    Field: MultiplierX
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the X-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.

    Field: MultiplierY
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the Y-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.

    Field: MultiplierZ
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The applied gravity load in the Z-direction of the specified coordinate system is equal to
    the self weight of the object times the Multiplier scale factor.
    Table: Tendon Loads - Strain

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Page 1699 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The line object local component to which the specified strain load is applied. This is
    either Strain11, Strain12, Strain13, Curvature1, Curvature2 or Curvature3.

    Field: Strain
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The strain load applied to the specified component of the object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified strain or curvature. If
    no joint pattern is specified then this item is reported as None.
    Table: Tendon Loads - Target Force

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Page 1700 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IncludeP
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target force is specified for the P degree of freedom. Otherwise it is
    No.

    Field: P
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This item is the target force specified for the P degree of freedom.

    Field: RelLocP
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item is the relative distance along the object where the target force specified for the P
    degree of freedom is located.
    Table: Tendon Loads - Temperature

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This item is either Temperature, Gradient2, or Gradient3 indicating the type of temperature
    load applied to the object.

    Page 1701 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Temp
    Field is Imported: Yes
    Format: Temperature Change (Forces section of form)
    Units: Temp
    temperature Label of the load pattern to which the specified auto seismic load applies
    Frame object.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The label of a Joint Pattern of scale factors multiplying the temperature change and
    temperature gradient values. If no pattern is specified then a unit scale factor is assumed
    at every joint.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the temperature load assignment to the frame object is automatically
    created from a bridge object. Otherwise it is No.

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this temperature load assignment is associated.
    This item only applies when the AutoBridge item is True.
    Table: Tendon Loads - Tension Force Or Stress

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Field: LoadPat
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of the load pattern to which the specified load applies.

    Page 1702 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Force or Stress indicating the type of tension load specified.

    Field: Force
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    This tendon tension force.

    Field: Stress
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    This tendon tension stress.

    Field: JackFrom
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either 'I-End', 'J-End' or 'Both' indicating where the jacking occurs.

    Field: Curvature
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    The curvature coefficient used in calculating friction losses.

    Field: Wobble
    Field is Imported: Yes
    Format: 1/Length (Miscellaneous section of form)
    Units: 1/Length
    The wobble coefficient used in calculating the wobble (length) effect portion of the
    friction losses.

    Field: LossAnchor
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The tendon slip distance when an anchor is set.
    Page 1703 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LossEShort
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The stress loss because of elastic shortening.
    When the tendoned is modeled using elements this loss is in addition to any loss
    calculated by analysis.

    Field: LossCreep
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The stress loss because of concrete creep.
    When the tendoned is modeled using elements this loss is in addition to any loss
    calculated by analysis.

    Field: LossShrink
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The stress loss because of concrete shrinkage.
    When the tendoned is modeled using elements this loss is in addition to any loss
    calculated by analysis.

    Field: LossSRelax
    Field is Imported: Yes
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2

    When the tendoned is modeled using elements this loss is in addition to any loss
    calculated by analysis.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the tendon load is automatically created from a bridge object.
    Otherwise it is No.

    Page 1704 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this tendon load is associated. This item only
    applies when the tendon load is an AutoBridge load.
    Table: Tendon Local Axes Assignments 1 - Typical

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Field: Angle
    Field is Imported: Yes
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle that the local 2 and 3 axes are rotated about the positive local 1 axis, from the
    default orientation or from the orientation determined by the plane reference vector. The
    rotation for a positive angle appears counterclockwise when the local +1 axis is pointing
    toward you.

    Field: AdvanceAxes
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if an advanced method is used to define the local axes reference vectors
    for the frame object. Otherwise it is No meaning that the default reference vectors are
    used.
    Default means that the local 1-axis for the frame object goes from the I-end to the J-end of
    the object. The local 2-axis direction is specified by an angle measured from the global
    +Z axis (or from the global +X axis if the object local 1-axis is parallel to the global +Z
    axis). The rotation for a positive angle appears counterclockwise when the local +1 axis is
    pointing toward you.
    Advanced means that the local axes are defined with respect to user-defined reference
    vectors. Note that when the advanced system is used, the specified Angle is applied to the
    local axes orientation defined by the user specified reference vectors.
    Table: Tendon Material Temperatures

    Page 1705 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Field: Temp
    Field is Imported: Yes
    Format: Temperature (Forces section of form)
    Units: Temp
    The object material temperature.

    Field: JtPattern
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Joint Pattern of scale factors that multiply the specified material temperatures.
    If no joint pattern is specified then this item is reported as None.
    Table: Tendon Section Assignments

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Field: TendonSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the tendon section.
    Table: Tendon Section Definitions

    Field: TendonSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the tendon section.

    Page 1706 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ModelOpt
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Loads or Elements indicating whether the tendon is modeled as loads applied
    to the model or modeled as discrete tendon elements.

    Field: PreType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Prestress or Post Tension indicating the prestress type.

    Field: Material
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the material property assigned to the tendon section.

    Field: Specify
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Diameter or Area indicating which tendon section property is specified. All
    other tendon section properties are computed from the specified property assuming a
    circular section shape.

    Field: Diameter
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the tendon section.

    Field: Area
    Field is Imported: Yes
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Cross-sectional area of the tendon section.

    Page 1707 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TorsConst
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Torsional constant for the tendon section.

    Field: I
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Moment of inertia for the tendon section.

    Field: AS
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Shear area for the tendon section.

    Field: Color
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either a defined color or an integer representation of the color associated with the
    section.
    The possible defined colors are Black, Red, Orange, Yellow, Green, Cyan, Blue, Magenta,
    White, Dark Red, Dark Yellow, Dark Green, Dark Cyan, Dark Blue, Dark Magenta,
    Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, Gray7 and Gray8. Gray1 is a light gray and
    Gray8 is a dark gray.

    Field: TotalWt
    Field is Imported: No
    Format: Weight (Mass and Weight section of form)
    Units: Force
    Total weight of all objects in the model that are assigned the specified tendon section.

    Field: TotalMass
    Field is Imported: No
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    Total mass of all objects in the model that are assigned the specified tendon section.

    Page 1708 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Area modifier for the specified tendon section.

    Field: A2Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear area modifier for shear parallel to the local 2-axis for the specified tendon section.

    Field: A3Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Shear area modifier for shear parallel to the local 3-axis for the specified tendon section.

    Field: JMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Torsional constant modifier for the specified tendon section.

    Field: I2Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Moment of inertia modifier for bending about the local 2-axis for the specified tendon
    section.

    Field: I3Mod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Moment of inertia modifier for bending about the local 3-axis for the specified tendon
    section.

    Page 1709 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Mass multiplier for the specified tendon section.

    Field: WMod
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    Weight multiplier for the specified tendon section.

    Field: GUID
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The global unique identifier (GUID) for the specified tendon section property.

    Field: Notes
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    User notes for the specified tendon section property.
    Table: Tendon Section Definitions - Bridge Object Flags

    Field: TendonSect
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the tendon section.

    Field: AutoBridge
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if the tendon section is automatically created from a bridge object.
    Otherwise it is No.

    Page 1710 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The name of the bridge object with which this tendon section is associated. This item only
    applies when the tendon property is an AutoBridge property.
    Table: Tendon Tension And Compression Limits

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Field: TensLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a tension limit exists for the object. Otherwise it is No. For import,
    the Tension item is only read if this item is Yes.

    Field: CompLimit
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a compression limit exists for the object. Otherwise it is No. For
    import, the Compression item is only read if this item is Yes.

    Field: Tension
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The tension limit for the object.

    Field: Compression
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    The compression limit for the object.
    Table: Tendon Vehicle Response Component Overwrites

    Page 1711 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Tendon
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Label of a Tendon object.

    Field: Usage
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either AASHTO HL - Superstructure, AASHTO HL - Reaction, or AASHTO H &
    HS Superstructure indicating the vehicle type and structural member type to which the
    overwrite applies.
    AASHTO HL - Superstructure refers to the superstructure negative moments over
    supports and applies to AASHTO H, HS and HL loading.
    AASHTO HL - Reaction refers to reactions at interior supports (piers) and applies only to
    AASHTO HL loaoding.
    AASHTO H & HS Superstructure refers to superstructure moments (positive or negative)
    and applies to AASHTO H and HS loading.

    Field: Component
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either P, V2, V3, T, M2 or M3 indicating the output component to which the
    overwrite applies.

    Field: Status
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Do Not Use, Use Positive Values, Use Negative Values, or Use All Values
    indicating the portion of the output for the specified component to which the overwrite
    applies.
    Table: Vehicles 1 - Standard Vehicles

    Field: VehName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name (Label) of the standard vehicle.
    Page 1712 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is one of the following standard vehicle types:AML, HSn-44, HSn-44L, Hn-44,
    Hn-44L, HL-93M, HL-93K, HL-93S,
    HL-93LB, HL-93F, P5, P7,
    P9, P9-F, P11, P13,
    P15, MHE, COOPERE80, HA,
    HB, HB-HA1, HB-HA2a, HB-HA2b,
    RL, UICn, IRC_A, IRC_B,
    IRC_AA_Wheeled, IRC_AA_Tracked, IRC_70R_7x2x2, JTG04_I_LANE,
    JTG04_II_LANE, JTG04_TRUCK, CJJ77_98_AM, CJJ77_98_AS,
    CJJ77_98_BM, CJJ77_98_BS, TB10002.1, ZK_HighSpeed,
    CL-W, CL-WL, CL2-W, CL2-WL,
    CL3-W, CL3-WL, CL-W-ONT, CL-WL-ONT,
    CL2-W-ONT, CL2-WL-ONT, CL3-W-ONT, CL3-WL-ONT,
    Euro_LM1_Lane1_Char, Euro_LM1_Lane2_Char, Euro_LM1_Lane3_Char,
    Euro_LM1_Other_Char,
    Euro_LM1_Lane1_Freq, Euro_LM1_Lane2_Freq, Euro_LM1_Lane3_Freq,
    Euro_LM1_Other_Freq,
    Euro_LM2, Euro_LM3_600/150, Euro_LM3_900/150, Euro_LM3_1200/150,
    Euro_LM3_1200/200, Euro_LM3_1500/150, Euro_LM3_1500/200,
    Euro_LM3_1800/150,
    Euro_LM3_1800/200, Euro_LM3_2400/200, Euro_LM3_2400/240,
    Euro_LM3_2400/200/200,
    Euro_LM3_3000/200, Euro_LM3_3000/240, Euro_LM3_3000/200/200,
    Euro_LM3_3600/200,
    Euro_LM3_3600/240, Euro_LM3_3600/200/200, Euro_LM4 .
    For the Hn-44, HSn-44, Hn-44L and HSn-44L vehicles, n is the nominal weight of the
    vehicle in tons. For example, if the scale factor for a HSn-44 vehicle is 20, then the
    vehicle specified is a HS20-44.
    For the UICn vehicle n is the magnitude of the uniform load in kN/m.

    Field: ScaleFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item only applies to Hn-44, HSn-44, Hn-44L, HSn-44L and UICnS standard vehicles.
    It is the scale factor represented by the n in the vehicle type. For example, a scale factor
    of 20 for a HSn-44 type vehicle means a HS20-44 vehicle.

    Page 1713 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DynAllow
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    This item only applies to HL-93K, HL-93M, HL-93S, HL-93LB, HL-93F, P9-F and P15
    standard vehicles. It is the dynamic load allowance, that is, it is the additive percentage by
    which the concentrated truck or tandem axle loads will be increased. The uniform lane
    load is not affected.

    Field: HWClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Highway class for Canadian Standard Association CL vehicles.

    Field: MinExtDist
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The minimum distance allowed from an axle load to an exterior edge of the lane that the
    considered vehicle is in. The axle load will not be placed closer to the exterior lane edge
    than this distance. Lane edges are specified as Exterior or Interior in the lane definition.

    Field: MinIntDist
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The minimum distance allowed from an axle load to an interior edge of the lane that the
    considered vehicle is in. The axle load will not be placed closer to the interior lane edge
    than this distance. Lane edges are specified as Exterior or Interior in the lane definition.

    Field: StayInLane
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No indicating whether or not the vehicle stays fully in the lane
    longitudinally. Typically this would be No but for cranes and crane rails it will probably
    be Yes.
    Table: Vehicles 2 - General Vehicles 1 - General

    Page 1714 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VehName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name (Label) of the general vehicle.

    Field: NumInter
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of sets of loads specified for the vehicle.

    Field: StayInLane
    Field is Imported: Yes
    Format: Controlled by program
    Units: Yes/No
    This item is either Yes or No indicating whether or not the vehicle stays fully in the lane
    longitudinally. Typically this would be No but for cranes and crane rails it will probably
    be Yes.
    Table: Vehicles 3 - General Vehicles 2 - Loads

    Field: VehName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name (Label) of the general vehicle.

    Field: LoadType
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    The load type for the specified load. This item is one of the following:Leading Load,
    Trailing Load, Fixed Length, Variable Length.

    Field: UnifLoad
    Field is Imported: Yes
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    A uniform load value.

    Page 1715 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AxleLoad
    Field is Imported: Yes
    Format: Force (Forces section of form)
    Units: Force
    An axle load value.

    Field: MinDist
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    The distance from the previous axle to the current axle. This is also the length of the
    current uniform load.
    This item is applicable to vehicles with a Load Type of Fixed Length and Variable Length.
    For Fixed Length load types this item is the fixed distance or length described above. For
    Variable Length load types this item is the lower bound distance or length described
    above.

    Field: MaxDist
    Field is Imported: Yes
    Format: Length (Section Dimensions section of form)
    Units: Length
    This item only applies toIt is the maximum distance from the previous axle to the current
    axle. This is also the maximum length of the current uniform load.
    If this value is 0 then it means the distance(length) is infinity.
    Table: Vehicles 4 - Vehicle Classes

    Field: VehClass
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of the vehicle class.

    Field: VehName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a vehicle assigned to the vehicle class.

    Page 1716 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ScaleFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A scale factor that multiplies the vehicle load of the associated vehicle.
    Table: Vehicles 5 - Vehicle Length Effect Factors

    Field: VehName
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    Name of a vehicle.

    Field: Type
    Field is Imported: Yes
    Format: Controlled by program
    Units: Text
    This is either Axle or Uniform indicating the type of the load.

    Field: Length
    Field is Imported: Yes
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    When the type item is Axle, this is the span length. When the type item is Uniform, this is
    the total length.

    Field: ScaleFactor
    Field is Imported: Yes
    Format: Controlled by program
    Units: Unitless
    A scale factor that multiplies the vehicle load of the associated length.
    Table: Assembled Joint Masses

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Page 1717 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MassSource
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of the mass source to which the specified mass applies.

    Field: U1
    Field is Imported: No
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    Total joint local 1-direction mass applied to the specified joint either directly or indirectly.

    Field: U2
    Field is Imported: No
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    Total joint local 2-direction mass applied to the specified joint either directly or indirectly.

    Field: U3
    Field is Imported: No
    Format: Mass (Mass and Weight section of form)
    Units: Force-Sec2/Length
    Total joint local 3-direction mass applied to the specified joint either directly or indirectly.

    Field: R1
    Field is Imported: No
    Format: Rotational Inertia (Mass and Weight section of form)
    Units: Force-Length-Sec2
    Total mass moment of inertia about the joint local 1-axis applied to the specified joint.

    Field: R2
    Field is Imported: No
    Format: Rotational Inertia (Mass and Weight section of form)
    Units: Force-Length-Sec2
    Total mass moment of inertia about the joint local 2-axis applied to the specified joint.

    Field: R3
    Field is Imported: No
    Format: Rotational Inertia (Mass and Weight section of form)
    Units: Force-Length-Sec2
    Total mass moment of inertia about the joint local 3-axis applied to the specified joint.
    Table: Base Reactions
    Page 1718 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    Page 1719 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: GlobalFX
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base reaction force component in the global X direction.

    Field: GlobalFY
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base reaction force component in the global Y direction.

    Field: GlobalFZ
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base reaction force component in the global Z direction.

    Page 1720 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GlobalMX
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The base reaction moment component about the global X axis.

    Field: GlobalMY
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The base reaction moment component about the global Y axis.

    Field: GlobalMZ
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The base reaction moment component about the global Z axis.

    Field: GlobalX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the point where the base reaction is reported.

    Field: GlobalY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the point where the base reaction is reported.

    Field: GlobalZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the point where the base reaction is reported.

    Field: XCentroidFX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the centroid of all forces (in the X direction) that contribute to
    FX. It is zero if FX = 0.
    Page 1721 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: YCentroidFX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the centroid of all forces (in the X direction) that contribute to
    FX, that is, the location where the forces cause zero moment MZ. It is zero if FX = 0.

    Field: ZCentroidFX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the centroid of all forces (in the X direction) that contribute to
    FX, that is, the location where the forces cause zero moment MY. It is zero if FX = 0.

    Field: XCentroidFY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the centroid of all forces (in the Y direction) that contribute to
    FY, that is, the location where the forces cause zero moment MZ. It is zero if FY = 0.

    Field: YCentroidFY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the centroid of all forces (in the Y direction) that contribute to
    FY. It is zero if FY = 0.

    Field: ZCentroidFY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the centroid of all forces (in the Y direction) that contribute to
    FY, that is, the location where the forces cause zero moment MX. It is zero if FY = 0.

    Field: XCentroidFZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the centroid of all forces (in the Z direction) that contribute to
    FZ, that is, the location where the forces cause zero moment MY. It is zero if FZ = 0.

    Page 1722 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: YCentroidFZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the centroid of all forces (in the Z direction) that contribute to
    FZ, that is, the location where the forces cause zero moment MX. It is zero if FZ = 0.

    Field: ZCentroidFZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the centroid of all forces (in the Z direction) that contribute to
    FZ. It is zero if FZ = 0.
    Table: Bridge Object Forces

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SectCutNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The unique number of a program-generated bridge object section cut.

    Field: Distance
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the bridge object to the section cut location.

    Field: LocType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Before or After indicating the section cut is either just before or just after the
    specified distance.

    Page 1723 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    Page 1724 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force in the bridge object.

    Field: V2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Vertical shear in the bridge object.

    Field: V3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Horizontal shear in the bridge object.

    Page 1725 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Torsion in the bridge object.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment about the vertical axis of the bridge object.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment along the bridge object.

    Field: GlobalX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global X coordinate of the point where the specified forces and moments are reported.

    Field: GlobalY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Y coordinate of the point where the specified forces and moments are reported.

    Field: GlobalZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Z coordinate of the point where the specified forces and moments are reported.
    Table: Bridge Object Girder Forces

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.
    Page 1726 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SectCutNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The unique number of a program-generated bridge object section cut.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder considered.

    Field: Distance
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance from the start of the bridge object to the section cut location.

    Field: LocType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Before or After indicating the section cut is either just before or just after the
    specified distance.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    Page 1727 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Page 1728 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force in the bridge object girder.

    Field: V2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Vertical shear in the bridge object girder.

    Field: V3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Horizontal shear in the bridge object girder.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Torsion in the bridge object girder.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment about the vertical axis of the bridge object girder.

    Page 1729 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment along the bridge object girder.

    Field: GlobalX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global X coordinate of the point where the specified forces and moments are reported.

    Field: GlobalY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Y coordinate of the point where the specified forces and moments are reported.

    Field: GlobalZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Z coordinate of the point where the specified forces and moments are reported.
    Table: Buckling Factors

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.

    Page 1730 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: ScaleFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The buckling load for the specified mode is equal to this scale factor times the loads
    specified for the buckling load case.
    Table: Element Deformations - Links

    Page 1731 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Link
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Link object.

    Field: LinkElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a Link element associated with the specified object For analysis, the object is
    internally modelled using one or more elements.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    Page 1732 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: U1
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The translational deformation of the link object in the link local 1 axis direction.

    Page 1733 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U2
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The translational deformation of the link object in the link local 2 axis direction.

    Field: U3
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The translational deformation of the link object in the link local 3 axis direction.

    Field: R1
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotational deformation of the link object about the link local 1 axis.

    Field: R2
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotational deformation of the link object about the link local 2 axis.

    Field: R3
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotational deformation of the link object about the link local 3 axis.
    Table: Element Deformations - Panel Zones

    Field: LinkElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Number of the link element used to model the panel zone.

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a joint object to which the panel zone is assigned.
    Page 1734 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    Page 1735 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: U1
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The translational deformation of the panel zone in the panel zone local 1 axis direction.

    Field: U2
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The translational deformation of the panel zone in the panel zone local 2 axis direction.

    Field: U3
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The translational deformation of the panel zone in the panel zone local 3 axis direction.

    Page 1736 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R1
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotational deformation of the panel zone about the panel zone local 1 axis.

    Field: R2
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotational deformation of the panel zone about the panel zone local 2 axis.

    Field: R3
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotational deformation of the panel zone about the panel zone local 3 axis.
    Table: Element Virtual Work

    Field: ObjectLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of an object. In the case of a panel zone this is the label of the joint object to which
    the panel zone is assigned.

    Field: ObjectType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Frame, Area, Solid, Link or Panel Zone indicating the type of object.

    Field: VWNamedSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of the virtual work named set associated with this output.

    Page 1737 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ForceCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The load case used for the force when computing the virtual work.

    Field: DisplCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The load case used for the displacement when computing the virtual work.

    Field: VirtualWork
    Field is Imported: No
    Format: Energy (Miscellaneous section of form)
    Units: Force-Length
    The virtual work computed for the associated object.

    Field: RelWork
    Field is Imported: No
    Format: Controlled by program
    Units: Percent
    The normalized virtual work for the object. This is computed as:
    [(VW/Volume)/Max(VW/Volume)]*100
    where VW is the virtual work for an object, Volume is the volume of an object, and Max
    indicates the object with the maximum VW/Volume value.

    Field: Volume
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    The volume of the associated object.
    Table: Element Forces - Area Shells

    Field: Area
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Page 1738 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of an area element associated with the specified area object. For analysis, the area
    object is internally modelled using one or more area elements.

    Field: ShellType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Shell-Thick, Shell-Thin, Shell-Layered, Plate-Thick, Plate-Thin or
    Membrane indicating the type of shell (area) element.

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint at which the Area element forces are reported.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    Page 1739 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Page 1740 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: F11
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The area element internal F11 membrane direct force per length reported in the area
    element local coordinate system.

    Field: F22
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The area element internal F22 membrane direct force per length reported in the area
    element local coordinate system.

    Field: F12
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The area element internal F12 membrane shear force per length reported in the area
    element local coordinate system.

    Field: FMax
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The maximum principal membrane force.

    Field: FMin
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The minimum principal membrane force.

    Field: FAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise (when the local 3 axis is pointing toward you) from
    the area local 1 axis to the direction of the maximum principal membrane force.

    Page 1741 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FVM
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The area element internal Von Mises membrane force per length.

    Field: M11
    Field is Imported: No
    Format: Moment/Length (Forces section of form)
    Units: Force-Length/Length
    The area element internal M11 plate bending moment per length reported in the area
    element local coordinate system.

    Field: M22
    Field is Imported: No
    Format: Moment/Length (Forces section of form)
    Units: Force-Length/Length
    The area element internal M22 plate bending moment per length reported in the area
    element local coordinate system.

    Field: M12
    Field is Imported: No
    Format: Moment/Length (Forces section of form)
    Units: Force-Length/Length
    The area element internal M12 plate twisting moment per length reported in the area
    element local coordinate system.

    Field: MMax
    Field is Imported: No
    Format: Moment/Length (Forces section of form)
    Units: Force-Length/Length
    The maximum principal plate moment.

    Field: MMin
    Field is Imported: No
    Format: Moment/Length (Forces section of form)
    Units: Force-Length/Length
    The minimum principal plate moment.

    Page 1742 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise (when the local 3 axis is pointing toward you) from
    the area local 1 axis to the direction of the maximum principal plate moment.

    Field: V13
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The area element internal V13 plate transverse shear force per length reported in the area
    element local coordinate system.

    Field: V23
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The area element internal V23 plate transverse shear force per length reported in the area
    element local coordinate system.

    Field: VMax
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    The maximum plate transverse shear force. It is equal to the square root of the sum of the
    squares of V13 and V23.

    Field: VAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise (when the local 3 axis is pointing toward you) from
    the area local 1 axis to the direction of Vmax.
    Table: Element Forces - Frames

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1743 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the I-end of the frame object to the considered station.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.
    Page 1744 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force in the frame local 1 axis direction at the specified station.

    Field: V2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear force in the frame local 2 axis direction at the specified station.

    Page 1745 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear force in the frame local 3 axis direction at the specified station.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Torsional moment about the frame local 1 axis at the specified station.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Bending moment about the frame local 2 axis at the specified station.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Bending moment about the frame local 3 axis at the specified station.

    Field: FrameElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a Frame element associated with the specified object For analysis, the object is
    internally modelled using one or more elements.

    Field: ElemStation
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the I-end of the frame element to the considered station.
    Table: Element Forces - Links

    Page 1746 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Link
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Link object.

    Field: LinkElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a Link element associated with the specified object For analysis, the object is
    internally modelled using one or more elements.

    Field: Station
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either I-End or J-End indicating the location of the reported forces.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.

    Page 1747 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Page 1748 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force in the link local 1 axis direction at the specified station.

    Field: V2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear force in the link local 2 axis direction at the specified station.

    Field: V3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear force in the link local 3 axis direction at the specified station.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Torsional moment about the link local 1 axis at the specified station.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Bending moment about the link local 2 axis at the specified station.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Bending moment about the link local 3 axis at the specified station.
    Table: Element Forces - Panel Zones

    Field: LinkElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Number of the link element used to model the panel zone.
    Page 1749 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JointI
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of the joint object at the I-End of the panel zone link element. If no joint object
    exists at this location then the number of the joint element at that location is reported in
    parenthesis.

    Field: JointJ
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of the joint object at the I-End of the panel zone link element. If no joint object
    exists at this location then the number of the joint element at that location is reported in
    parenthesis.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    Page 1750 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Page 1751 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force in the panel zone local 1 axis direction.

    Field: V2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear force in the panel zone local 2 axis direction.

    Field: V3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear force in the panel zone local 3 axis direction.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Torsional moment about the panel zone local 1 axis.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Bending moment about the panel zone local 2 axis.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Bending moment about the panel zone local 3 axis.
    Table: Element Joint Forces - Areas

    Field: Area
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of an area object.
    Page 1752 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of an area element associated with the specified area object. For analysis, the area
    object is internally modelled using one or more area elements.

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint object at which the Area element joint forces are reported. If no
    joint object exists at this location then the number of the joint element at that location is
    reported in parenthesis.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.

    Page 1753 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: F1
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Area joint force at the specified joint in the joint local 1 direction.
    Page 1754 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: F2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Area joint force at the specified joint in the joint local 2 direction.

    Field: F3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Area joint force at the specified joint in the joint local 3 direction.

    Field: M1
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Area joint moment at the specified joint about the joint local 1 axis.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Area joint moment at the specified joint about the joint local 2 axis.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Area joint moment at the specified joint about the joint local 3 axis.
    Table: Element Joint Forces - Frames

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1755 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint object at which the Frame element joint forces are reported. If no
    joint object exists at this location then the number of the joint element at that location is
    reported in parenthesis.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.

    Page 1756 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: F1
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Frame joint force at the specified joint in the joint local 1 direction.

    Field: F2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Frame joint force at the specified joint in the joint local 2 direction.
    Page 1757 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: F3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Frame joint force at the specified joint in the joint local 3 direction.

    Field: M1
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Frame joint moment at the specified joint about the joint local 1 axis.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Frame joint moment at the specified joint about the joint local 2 axis.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Frame joint moment at the specified joint about the joint local 3 axis.

    Field: FrameElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a Frame element associated with the specified object For analysis, the object is
    internally modelled using one or more elements.
    Table: Element Joint Forces - Links

    Field: Link
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a link object, or, in the case of a panel zone, the subscript PZ followed by the
    label of the joint object to which the panel zone is assigned.

    Page 1758 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LinkElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a Link element associated with the specified object For analysis, the object is
    internally modelled using one or more elements.

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint object at which the Link element joint forces are reported. If no
    joint object exists at this location then the number of the joint element at that location is
    reported in parenthesis.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.

    Page 1759 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: F1
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Link joint force at the specified joint in the joint local 1 direction.
    Page 1760 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: F2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Link joint force at the specified joint in the joint local 2 direction.

    Field: F3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Link joint force at the specified joint in the joint local 3 direction.

    Field: M1
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Link joint moment at the specified joint about the joint local 1 axis.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Link joint moment at the specified joint about the joint local 2 axis.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Link joint moment at the specified joint about the joint local 3 axis.
    Table: Element Joint Forces - Solids

    Field: Solid
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Page 1761 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SolidElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a Solid element associated with the specified object For analysis, the object is
    internally modelled using one or more elements.

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint object at which the Solid element joint forces are reported. If no
    joint object exists at this location then the number of the joint element at that location is
    reported in parenthesis.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.

    Page 1762 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: F1
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Solid joint force at the specified joint in the joint local 1 direction.
    Page 1763 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: F2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Solid joint force at the specified joint in the joint local 2 direction.

    Field: F3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Solid joint force at the specified joint in the joint local 3 direction.

    Field: M1
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Solid joint moment at the specified joint about the joint local 1 axis.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Solid joint moment at the specified joint about the joint local 2 axis.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Solid joint moment at the specified joint about the joint local 3 axis.
    Table: Element Stresses - Frames

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the I-end of the frame object to the considered station.
    Page 1764 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    Page 1765 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The index of the stress point within the cross section.

    Field: X2
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The cross-section coordinate x2 of this point, measured from the centroid in the local-2
    direction.

    Field: X3
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The cross-section coordinate x3 of this point, measured from the centroid in the local-3
    direction.

    Page 1766 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: S11
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Frame element internal S11 stress at the specified joint reported in the Frame element local
    coordinate system.

    Field: S12
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Frame element internal S12 stress at the specified joint reported in the Frame element
    local coordinate system.

    Field: S13
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Frame element internal S13 stress at the specified joint reported in the Frame element
    local coordinate system.

    Field: SMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Frame element maximum principal stress at the specified joint.

    Field: SMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Frame element minimum principal stress at the specified joint.

    Field: SVM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Frame element Von Mises stress at the specified joint.

    Page 1767 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IsS11Max
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not the maximum value of the stress S11occurs at this point.

    Field: IsS12Max
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not the maximum value of the stress S12occurs at this point.

    Field: IsS13Max
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not the maximum value of the stress S13occurs at this point.

    Field: IsSMaxMax
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not the maximum value of the stress SMaxoccurs at this point.

    Field: IsSMinMax
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not the maximum value of the stress SMinoccurs at this point.

    Field: IsSVMMax
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not the maximum value of the stress SVMoccurs at this point.

    Field: IsS11Min
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not the minimum value of the stress S11occurs at this point.

    Page 1768 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IsS12Min
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not the minimum value of the stress S12occurs at this point.

    Field: IsS31Min
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not the minimum value of the stress S13occurs at this point.

    Field: IsSMaxMin
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not the minimum value of the stress SMaxoccurs at this point.

    Field: IsSMinMin
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not the minimum value of the stress SMinoccurs at this point.

    Field: IsSVMMin
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not the minimum value of the stress SVMoccurs at this point.

    Field: FrameElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a Frame element associated with the specified object For analysis, the object is
    internally modelled using one or more elements.

    Field: ElemStation
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the I-end of the frame element to the considered station.
    Page 1769 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Element Stresses - Area Asolids

    Field: Area
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: AreaElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of an area element associated with the specified area object. For analysis, the area
    object is internally modelled using one or more area elements.

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint at which the Area element stresses are reported.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.

    Page 1770 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For modal cases this is Mode.


    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.
    Page 1771 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: S11
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S11 stress, at the specified joint, reported in the area element
    local coordinate system.

    Field: S22
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S22 stress, at the specified joint, reported in the area element
    local coordinate system.

    Field: S33
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S22 stress, at the specified joint, reported in the area element
    local coordinate system.

    Field: S12
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S12 stress, at the specified joint, reported in the area element
    local coordinate system.

    Field: SMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element maximum Effective length factor for buckling about the frame object
    local major axis. This item is specified as a fraction of the frame object length.
    Multiplying this factor times the frame object length gives the effective length for the
    object.

    Field: SMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element minimum Effective length factor for buckling about the frame object
    local major axis. This item is specified as a fraction of the frame object length.
    Page 1772 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Multiplying this factor times the frame object length gives the effective length for the
    object.

    Field: SAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise (when the local 3 axis is pointing toward you) from
    the Area element local 1 axis to the direction of the maximum principal stress at the
    specified joint.

    Field: SVM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The asolid (area) element Von Mises stress at the specified joint.
    Table: Element Stresses - Area Planes

    Field: Area
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: AreaElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of an area element associated with the specified area object. For analysis, the area
    object is internally modelled using one or more area elements.

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint at which the Area element stresses are reported.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Page 1773 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.

    Page 1774 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: S11
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S11 stress, at the specified joint, reported in the area element
    local coordinate system.

    Field: S22
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S22 stress, at the specified joint, reported in the area element
    local coordinate system.

    Field: S33
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S22 stress, at the specified joint, reported in the area element
    local coordinate system.

    Page 1775 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: S12
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S12 stress, at the specified joint, reported in the area element
    local coordinate system.

    Field: SMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element maximum Effective length factor for buckling about the frame object
    local major axis. This item is specified as a fraction of the frame object length.
    Multiplying this factor times the frame object length gives the effective length for the
    object.

    Field: SMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element minimum Effective length factor for buckling about the frame object
    local major axis. This item is specified as a fraction of the frame object length.
    Multiplying this factor times the frame object length gives the effective length for the
    object.

    Field: SAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise (when the local 3 axis is pointing toward you) from
    the Area element local 1 axis to the direction of the maximum principal stress at the
    specified joint.

    Field: SVM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The plane (area) element Von Mises stress at the specified joint.
    Table: Element Stresses - Area Shells

    Page 1776 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Area
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: AreaElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of an area element associated with the specified area object. For analysis, the area
    object is internally modelled using one or more area elements.

    Field: ShellType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Shell-Thick, Shell-Thin, Shell-Layered, Plate-Thick, Plate-Thin or
    Membrane indicating the type of shell (area) element.

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint at which the Area element stresses are reported.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Page 1777 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.

    Page 1778 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: S11Top
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S11 stress, at the top of the element, at the specified joint,
    reported in the area element local coordinate system.

    Field: S22Top
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S22 stress, at the top of the element, at the specified joint,
    reported in the area element local coordinate system.

    Field: S12Top
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S12 stress, at the top of the element, at the specified joint,
    reported in the area element local coordinate system.

    Field: SMaxTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element maximum principal stress, at the top of the element, at the specified
    joint.

    Page 1779 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SMinTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element minimum principal stress, at the top of the element, at the specified joint.

    Field: SAngleTop
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise (when the local 3 axis is pointing toward you) from
    the Area element local 1 axis to the direction of the maximum principal stress at the top of
    the element, at the specified joint.

    Field: SVMTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element Von Mises stress, at the top of the element, at the specified joint.

    Field: S11Bot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S11 stress, at the bottom of the element, at the specified joint,
    reported in the area element local coordinate system.

    Field: S22Bot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S22 stress, at the bottom of the element, at the specified joint,
    reported in the area element local coordinate system.

    Field: S12Bot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S12 stress, at the bottom of the element, at the specified joint,
    reported in the area element local coordinate system.

    Page 1780 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SMaxBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element maximum principal stress, at the bottom of the element, at the specified
    joint.

    Field: SMinBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element minimum principal stress, at the bottom of the element, at the specified
    joint.

    Field: SAngleBot
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise (when the local 3 axis is pointing toward you) from
    the Area element local 1 axis to the direction of the maximum principal stress at the
    bottom of the element, at the specified joint.

    Field: SVMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element Von Mises stress, at the top of the element, at the specified joint.

    Field: S13Avg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element average S13 out-of-plane shear stress at the specified joint.

    Field: S23Avg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element average S23 out-of-plane shear stress at the specified joint.

    Page 1781 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SMaxAvg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element maximum average out-of-plane shear stress. It is equal to the square
    root of the sum of the squares of S13Avg and S23Avg.

    Field: SAngleAvg
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise (when the local 3 axis is pointing toward you) from
    the area element local 1 axis to the direction of SMaxAvg.
    Table: Element Stresses - Area Shell Layers

    Field: Area
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of an area object.

    Field: AreaElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of an area element associated with the specified area object. For analysis, the area
    object is internally modelled using one or more area elements.

    Field: LayerName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the layer considered in the Layered Shell element.

    Field: IntPtNum
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The integration point number considered in the specified layer in the Layered Shell
    element.

    Page 1782 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IntPtLoc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The relative location of the integration point considered in the specified layer in the
    Layered Shell element. The location is between -1 (bottom of layer) and +1 (top of layer),
    inclusive. The midheight of the layer is at a value of 0.

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint at which the Area element stresses are reported.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.

    Page 1783 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Page 1784 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: S11
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S11 stress, at the specified joint, for the specified layer and layer
    integration point, reported in the area element local coordinate system.

    Field: S22
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S22 stress, at the specified joint, for the specified layer and layer
    integration point, reported in the area element local coordinate system.

    Field: S12
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element internal S12 stress, at the specified joint, for the specified layer and layer
    integration point, reported in the area element local coordinate system.

    Field: SMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The shell area element maximum principal stress, at the specified joint for the specified
    layer and layer integration point.

    Field: SMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The shell area element minimum principal stress, at the specified joint for the specified
    layer and layer integration point.

    Field: SAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise (when the local 3 axis is pointing toward you) from
    the area element local 1 axis to the direction of the maximum principal layer stress.

    Page 1785 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SVM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The shell area element Von Mises stress, at the specified joint for the specified layer and
    layer integration point.

    Field: S13Avg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element average S13 out-of-plane shear stress at the specified joint for the
    specified layer and layer integration point.

    Field: S23Avg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element average S23 out-of-plane shear stress at the specified joint for the
    specified layer and layer integration point.

    Field: SMaxAvg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The area element maximum average out-of-plane shear stress for the specified layer and
    layer integration point. It is equal to the square root of the sum of the squares of S13Avg
    and S23Avg.

    Field: SAngleAvg
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise (when the local 3 axis is pointing toward you) from
    the area element local 1 axis to the direction of SMaxAvg.
    Table: Element Stresses - Solids

    Field: Solid
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Solid object.

    Page 1786 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SolidElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a Solid element associated with the specified object For analysis, the object is
    internally modelled using one or more elements.

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint at which the Solid element stresses are reported.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    Page 1787 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: S11
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Solid element internal S11 stress at the specified joint reported in the Solid element local
    coordinate system.

    Page 1788 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: S22
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Solid element internal S22 stress at the specified joint reported in the Solid element local
    coordinate system.

    Field: S33
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Solid element internal S33 stress at the specified joint reported in the Solid element local
    coordinate system.

    Field: S12
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Solid element internal S12 stress at the specified joint reported in the Solid element local
    coordinate system.

    Field: S13
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Solid element internal S13 stress at the specified joint reported in the Solid element local
    coordinate system.

    Field: S23
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Solid element internal S23 stress at the specified joint reported in the Solid element local
    coordinate system.

    Field: SMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Solid element maximum principal stress at the specified joint.

    Page 1789 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SMid
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Solid element middle principal stress at the specified joint.

    Field: SMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Solid element minimum principal stress at the specified joint.

    Field: SVM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Solid element Von Mises stress at the specified joint.

    Field: DirCosMax1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the Solid element maximum principal stress relative to the element
    local 1 axis at the specified joint.

    Field: DirCosMax2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the Solid element maximum principal stress relative to the element
    local 2 axis at the specified joint.

    Field: DirCosMax3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the Solid element maximum principal stress relative to the element
    local 3 axis at the specified joint.

    Page 1790 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DirCosMid1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the Solid element middle principal stress relative to the element
    local 1 axis at the specified joint.

    Field: DirCosMid2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the Solid element middle principal stress relative to the element
    local 2 axis at the specified joint.

    Field: DirCosMid3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the Solid element middle principal stress relative to the element
    local 3 axis at the specified joint.

    Field: DirCosMin1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the Solid element minimum principal stress relative to the element
    local 1 axis at the specified joint.

    Field: DirCosMin2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the Solid element minimum principal stress relative to the element
    local 2 axis at the specified joint.

    Field: DirCosMin3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the Solid element minimum principal stress relative to the element
    local 3 axis at the specified joint.
    Table: Frame Fiber Hinge States 01 - Overall Hinge

    Page 1791 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.
    Page 1792 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a hinge property assigned to the specified frame object.

    Field: GenHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the hinge property generated by the program for the specified frame object
    based on the assigned hinge property.

    Page 1793 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RelDist
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The specified relative distance from the I-end of the object to the hinge location. The
    relative distance is equal to the absolute distance divided by the beam length.

    Field: AbsDist
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the hinge location.

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    P force in the frame element at the associated hinge, for the specified step.

    Field: V2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    V2 force in the frame element at the associated hinge, for the specified step.

    Field: V3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    V3 force in the frame element at the associated hinge, for the specified step.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    TA modal participation factor for the structure.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    M2A modal participation factor for the structure.
    Page 1794 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    M3A modal participation factor for the structure.

    Field: U1
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The translational deformation of the frame element, in the frame element local 1 direction,
    at the associated hinge, for the specified step.

    Field: U2
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The translational deformation of the frame element, in the frame element local 2 direction,
    at the associated hinge, for the specified step.

    Field: U3
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The translational deformation of the frame element, in the frame element local 3 direction,
    at the associated hinge, for the specified step.

    Field: R1
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotational deformation of the frame element, in the frame element local 1 direction, at
    the associated hinge, for the specified step.

    Field: R2
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotational deformation of the frame element, in the frame element local 2 direction, at
    the associated hinge, for the specified step.

    Page 1795 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R3
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotational deformation of the frame element, in the frame element local 3 direction, at
    the associated hinge, for the specified step.

    Field: HingeState
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either A to B, B to C, C to D, D to E, or >E indicating the state of the hinge for the
    specified step.
    Table: Frame Fiber Hinge States 02 - Individual Fibers

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.

    Page 1796 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For modal cases this is Mode.


    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.
    Page 1797 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a hinge property assigned to the specified frame object.

    Field: GenHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the hinge property generated by the program for the specified frame object
    based on the assigned hinge property.

    Field: FiberNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The fiber number in the fiber hinge definition.

    Field: FiberStress
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The stress in the fiber for the specified step.

    Field: FiberStrain
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The strain in the fiber for the specified step.

    Field: FiberState
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either A to B, B to C, C to D, D to E, or >E indicating the state of the fiber for the
    specified step.

    Page 1798 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FiberMat
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The fiber material.

    Field: FiberArea
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    The fiber cross section area.

    Field: FiberCoord3
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The section property local 3-axis coordinate of the fiber.

    Field: FiberCoord2
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The section property local 2-axis coordinate of the fiber.

    Field: RelDist
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The specified relative distance from the I-end of the object to the hinge location. The
    relative distance is equal to the absolute distance divided by the beam length.

    Field: AbsDist
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the hinge location.
    Table: Frame Hinge States

    Page 1799 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.
    Page 1800 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: AssignHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a hinge property assigned to the specified frame object.

    Field: GenHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the hinge property generated by the program for the specified frame object
    based on the assigned hinge property.

    Page 1801 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RelDist
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The specified relative distance from the I-end of the object to the hinge location. The
    relative distance is equal to the absolute distance divided by the beam length.

    Field: AbsDist
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The specified absolute distance from the I-end of the object to the hinge location.

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    P force in the frame element at the associated hinge, for the specified step.

    Field: V2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    V2 force in the frame element at the associated hinge, for the specified step.

    Field: V3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    V3 force in the frame element at the associated hinge, for the specified step.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    TA modal participation factor for the structure.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    M2A modal participation factor for the structure.
    Page 1802 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    M3A modal participation factor for the structure.

    Field: U1Plastic
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The translational deformation of the frame element, in the frame element local 1 direction,
    at the associated hinge, for the specified step.

    Field: U2Plastic
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The translational deformation of the frame element, in the frame element local 2 direction,
    at the associated hinge, for the specified step.

    Field: U3Plastic
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The translational deformation of the frame element, in the frame element local 3 direction,
    at the associated hinge, for the specified step.

    Field: R1Plastic
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotational deformation of the frame element, in the frame element local 1 direction, at
    the associated hinge, for the specified step.

    Field: R2Plastic
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotational deformation of the frame element, in the frame element local 2 direction, at
    the associated hinge, for the specified step.

    Page 1803 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R3Plastic
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    The rotational deformation of the frame element, in the frame element local 3 direction, at
    the associated hinge, for the specified step.

    Field: HingeState
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either A to B, B to C, C to D, D to E, or >E indicating the state of the hinge for the
    specified step.

    Field: HingeStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either A to IO, IO to LS, LS to CP, or >CP indicating the hinge status for the
    specified step.
    Table: Joint Accelerations - Absolute

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Page 1804 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.

    Page 1805 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: U1
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    Joint absolute acceleration in the joint local 1 axis direction.

    Field: U2
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    Joint absolute acceleration in the joint local 2 axis direction.

    Field: U3
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    Joint absolute acceleration in the joint local 3 axis direction.

    Field: R1
    Field is Imported: No
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    Joint absolute acceleration about the joint local 1 axis.

    Field: R2
    Field is Imported: No
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    Joint absolute acceleration about the joint local 2 axis.

    Page 1806 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R3
    Field is Imported: No
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    Joint absolute acceleration about the joint local 3 axis.
    Table: Joint Accelerations - Relative

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    Page 1807 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: U1
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    Joint relative acceleration in the joint local 1 axis direction.

    Page 1808 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U2
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    Joint relative acceleration in the joint local 2 axis direction.

    Field: U3
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    Joint relative acceleration in the joint local 3 axis direction.

    Field: R1
    Field is Imported: No
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    Joint relative acceleration about the joint local 1 axis.

    Field: R2
    Field is Imported: No
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    Joint relative acceleration about the joint local 2 axis.

    Field: R3
    Field is Imported: No
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    Joint relative acceleration about the joint local 1 axis.
    Table: Joint Displacements

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.
    Page 1809 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.

    Page 1810 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: U1
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    Joint displacement (relative to the ground) in the joint local 1 axis direction.

    Field: U2
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    Joint displacement (relative to the ground) in the joint local 2 axis direction.

    Field: U3
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    Joint displacement (relative to the ground) in the joint local 3 axis direction.

    Field: R1
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    Joint rotation (relative to the ground) about the joint local 1 axis.

    Page 1811 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R2
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    Joint rotation (relative to the ground) about the joint local 2 axis.

    Field: R3
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    Joint rotation (relative to the ground) about the joint local 3 axis.
    Table: Joint Displacements - Absolute

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.

    Page 1812 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Page 1813 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U1
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    Joint absolute displacement in the joint local 1 axis direction.

    Field: U2
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    Joint absolute displacement in the joint local 2 axis direction.

    Field: U3
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    Joint absolute displacement in the joint local 3 axis direction.

    Field: R1
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    Joint absolute rotation about the joint local 1 axis.

    Field: R2
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    Joint absolute rotation about the joint local 2 axis.

    Field: R3
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    Joint absolute rotation about the joint local 3 axis.
    Table: Joint Displacements - Generalized

    Field: GenDispl
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of the generalized displacement.
    Page 1814 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DisplType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Translation or Rotation indicating the type of generalized displacement.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.
    Page 1815 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: Translation
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    Displacement of a translational-type generalized displacement.

    Field: Rotation
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    Rotation of a rotational-type generalized displacement.
    Table: Joint Reactions

    Page 1816 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.
    Page 1817 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: F1
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Joint reaction force in the joint local 1 axis direction.

    Field: F2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Joint reaction force in the joint local 2 axis direction.

    Page 1818 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: F3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Joint reaction force in the joint local 3 axis direction.

    Field: M1
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Joint reaction moment about the joint local 1 axis.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Joint reaction moment about the joint local 2 axis.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Joint reaction moment about the joint local 3 axis.
    Table: Joint Time History Response Spectra

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: RSNamedSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of the joint time history response spectrum named set associated with this output.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.
    Page 1819 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CoordSys
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The coordinate system in which the response spectrum curve is generated.

    Field: Dir
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either UX, UY, or UZ (U1, U2 or U3 for local) indicating the direction in the
    specified coordinate system for which the response spectrum curve is generated.

    Field: Damping
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The critical damping ratio for with the response spectrum.

    Field: SpcWidening
    Field is Imported: No
    Format: Controlled by program
    Units: Percent
    The percent spectrum widening for the response spectrum.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    A period value for the response spectrum.

    Field: Frequency
    Field is Imported: No
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    A frequency value for the response spectrum.

    Field: SD
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    A spectral displacement value for the response spectrum.
    Page 1820 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SV
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    A spectral velocity value for the response spectrum.

    Field: PSV
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    A pseudo spectral velocity value for the response spectrum.

    Field: SA
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    A spectral acceleration value for the response spectrum.

    Field: PSA
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    A pseudo spectral acceleration value for the response spectrum.
    Table: Joint Velocities - Absolute

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.
    Page 1821 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.

    Page 1822 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: U1
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    Joint absolute velocity in the joint local 1 axis direction.

    Field: U2
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    Joint absolute velocity in the joint local 2 axis direction.

    Field: U3
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    Joint absolute velocity in the joint local 3 axis direction.

    Field: R1
    Field is Imported: No
    Format: Velocity-Rot (Time-Related section of form)
    Units: rad/sec
    Joint absolute velocity about the joint local 1 axis.

    Field: R2
    Field is Imported: No
    Format: Velocity-Rot (Time-Related section of form)
    Units: rad/sec
    Joint absolute velocity about the joint local 2 axis.

    Page 1823 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R3
    Field is Imported: No
    Format: Velocity-Rot (Time-Related section of form)
    Units: rad/sec
    Joint absolute velocity about the joint local 3 axis.
    Table: Joint Velocities - Relative

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a joint.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    Page 1824 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Field: U1
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    Joint relative velocity in the joint local 1 axis direction.

    Page 1825 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U2
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    Joint relative velocity in the joint local 2 axis direction.

    Field: U3
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    Joint relative velocity in the joint local 3 axis direction.

    Field: R1
    Field is Imported: No
    Format: Velocity-Rot (Time-Related section of form)
    Units: rad/sec
    Joint relative velocity about the joint local 1 axis.

    Field: R2
    Field is Imported: No
    Format: Velocity-Rot (Time-Related section of form)
    Units: rad/sec
    Joint relative velocity about the joint local 2 axis.

    Field: R3
    Field is Imported: No
    Format: Velocity-Rot (Time-Related section of form)
    Units: rad/sec
    Joint relative velocity about the joint local 3 axis.
    Table: Modal Load Participation Ratios

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a modal case.

    Page 1826 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ItemType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This may be Load Pattern, Load Inertia, Acceleration, Link or Panel Zone. It specifies the
    type of item for which the modal load participation is reported.

    Field: Item
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    If the ItemType is Load Pattern or Load Inertia then this is the name of the load pattern.
    If the ItemType is Accel then this is the acceleration direction. It is either UX, UY, UZ,
    RX, RY, or RZ.
    If the ItemType is Link then this is the name of the link followed by the degree of freedom
    for which the output is reported in parenthesis. The degree of freedom is either U1, U2,
    U3, R1, R2, or R3.
    If the ItemType is Panel Zone then this is the name of the joint to which the panel zone is
    assigned followed by the degree of freedom for which the output is reported in
    parenthesis. The degree of freedom is either U1, U2, U3, R1, R2, or R3.

    Field: Static
    Field is Imported: No
    Format: Controlled by program
    Units: Percent
    The static load participation ratio.

    Field: Dynamic
    Field is Imported: No
    Format: Controlled by program
    Units: Percent
    The dynamic load participation ratio.
    Table: Modal Participating Mass Ratios

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a modal case.

    Page 1827 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.

    Page 1828 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The period of the associated mode from the associated modal load case.

    Field: UX
    Field is Imported: No
    Format: Par Mass Ratios (Modal Factors section of form)
    Units: Unitless
    The modal participating mass ratio for the structure UX degree of freedom. This ratio
    applies to the associated mode of the associated modal analysis case.

    Field: UY
    Field is Imported: No
    Format: Par Mass Ratios (Modal Factors section of form)
    Units: Unitless
    The modal participating mass ratio for the structure UY degree of freedom. This ratio
    applies to the associated mode of the associated modal analysis case.

    Field: UZ
    Field is Imported: No
    Format: Par Mass Ratios (Modal Factors section of form)
    Units: Unitless
    The modal participating mass ratio for the structure UZ degree of freedom. This ratio
    applies to the associated mode of the associated modal analysis case.

    Field: SumUX
    Field is Imported: No
    Format: Par Mass Ratios (Modal Factors section of form)
    Units: Unitless
    The cumulative sum of the modal participating mass ratio for the structure UX degree of
    freedom.

    Field: SumUY
    Field is Imported: No
    Format: Par Mass Ratios (Modal Factors section of form)
    Units: Unitless
    The cumulative sum of the modal participating mass ratio for the structure UY degree of
    freedom.
    Page 1829 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SumUZ
    Field is Imported: No
    Format: Par Mass Ratios (Modal Factors section of form)
    Units: Unitless
    The cumulative sum of the modal participating mass ratio for the structure UZ degree of
    freedom.

    Field: RX
    Field is Imported: No
    Format: Par Mass Ratios (Modal Factors section of form)
    Units: Unitless
    The modal participating mass ratio for the structure RX degree of freedom. This ratio
    applies to the associated mode of the associated modal analysis case.

    Field: RY
    Field is Imported: No
    Format: Par Mass Ratios (Modal Factors section of form)
    Units: Unitless
    The modal participating mass ratio for the structure RY degree of freedom. This ratio
    applies to the associated mode of the associated modal analysis case.

    Field: RZ
    Field is Imported: No
    Format: Par Mass Ratios (Modal Factors section of form)
    Units: Unitless
    The modal participating mass ratio for the structure RZ degree of freedom. This ratio
    applies to the associated mode of the associated modal analysis case.

    Field: SumRX
    Field is Imported: No
    Format: Par Mass Ratios (Modal Factors section of form)
    Units: Unitless
    The cumulative sum of the modal participating mass ratio for the structure RX degree of
    freedom.

    Field: SumRY
    Field is Imported: No
    Format: Par Mass Ratios (Modal Factors section of form)
    Units: Unitless
    The cumulative sum of the modal participating mass ratio for the structure RY degree of
    freedom.

    Page 1830 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SumRZ
    Field is Imported: No
    Format: Par Mass Ratios (Modal Factors section of form)
    Units: Unitless
    The cumulative sum of the modal participating mass ratio for the structure RZ degree of
    freedom.
    Table: Modal Participation Factors

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a modal case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Page 1831 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The period of the associated mode from the associated modal load case.

    Field: UX
    Field is Imported: No
    Format: Modal Par - Trans (Modal Factors section of form)
    Units: Force-Length
    A modal participation factor for the structure " & item1 & " degree of freedom, for the
    assciated mode of the associated modal load case. UX degree of freedom, for the assciated
    mode of the associated modal load case.

    Field: UY
    Field is Imported: No
    Format: Modal Par - Trans (Modal Factors section of form)
    Units: Force-Length
    A modal participation factor for the structure " & item1 & " degree of freedom, for the
    assciated mode of the associated modal load case. UY degree of freedom, for the assciated
    mode of the associated modal load case.

    Page 1832 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: UZ
    Field is Imported: No
    Format: Modal Par - Trans (Modal Factors section of form)
    Units: Force-Length
    A modal participation factor for the structure " & item1 & " degree of freedom, for the
    assciated mode of the associated modal load case. UZ degree of freedom, for the assciated
    mode of the associated modal load case.

    Field: RX
    Field is Imported: No
    Format: Modal Par - Rot (Modal Factors section of form)
    Units: Force-Length
    A modal participation factor for the structure " & item1 & " degree of freedom, for the
    assciated mode of the associated modal load case. RX degree of freedom, for the assciated
    mode of the associated modal load case.

    Field: RY
    Field is Imported: No
    Format: Modal Par - Rot (Modal Factors section of form)
    Units: Force-Length
    A modal participation factor for the structure " & item1 & " degree of freedom, for the
    assciated mode of the associated modal load case. RY degree of freedom, for the assciated
    mode of the associated modal load case.

    Field: RZ
    Field is Imported: No
    Format: Modal Par - Rot (Modal Factors section of form)
    Units: Force-Length
    A modal participation factor for the structure " & item1 & " degree of freedom, for the
    assciated mode of the associated modal load case. RZ degree of freedom, for the assciated
    mode of the associated modal load case.

    Field: ModalMass
    Field is Imported: No
    Format: Modal Mass (Modal Factors section of form)
    Units: Force-Length-s2
    The modal mass for the specified mode. This is a measure of the kinetic energy in the
    structure if it is deforming in the specified mode. Modal mass is calculated as
    S(transpose)*M*S where S is the mode shape and M is the mass matrix.
    Note that the modal period (MP), modal mass (MM) and modal stiffness (MS) are related
    to each other by the following equation:
    MP = 2*pi*(MM/MS)^0.5.
    Page 1833 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ModalStiff
    Field is Imported: No
    Format: Modal Stiffness (Modal Factors section of form)
    Units: Force-Length
    Modal stiffness for the specified mode. This is a measure of the strain energy in the
    structure if it is deforming in the specified mode. Modal mass is calculated as
    S(transpose)*K*S where S is the mode shape and K is the stiffness matrix.
    Note that the modal period (MP), modal mass (MM) and modal stiffness (MS) are related
    to each other by the following equation:
    MP = 2*pi*(MM/MS)^0.5.
    Table: Modal Periods And Frequencies

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a modal case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.
    Page 1834 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The period of the associated mode from the associated modal load case.

    Field: Frequency
    Field is Imported: No
    Format: Frequency (Time-Related section of form)
    Units: Cyc/sec
    The cyclic frequency of the associated mode from the associated modal load case.

    Field: CircFreq
    Field is Imported: No
    Format: Controlled by program
    Units: rad/sec
    The circular frequency of the associated mode from the associated modal load case.

    Page 1835 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Eigenvalue
    Field is Imported: No
    Format: Controlled by program
    Units: rad2/sec2
    The eigenvalue of the associated mode from the associated modal load case.
    Table: Objects And Elements - Areas

    Field: AreaElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of an area element.

    Field: AreaObject
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the area object from which the specified area element was created.

    Field: ElemJt1
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element that is a corner point of the area element.

    Field: ElemJt2
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element that is a corner point of the area element.

    Field: ElemJt3
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element that is a corner point of the area element.

    Field: ElemJt4
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element that is a corner point of the area element.
    Page 1836 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Objects And Elements - Frames

    Field: FrameElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a frame element.

    Field: FrameObject
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the frame object from which the specified frame element was created.

    Field: ElemJtI
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element at the I-end of the frame element.

    Field: ElemJtJ
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element at the J-end of the frame element.
    Table: Objects And Elements - Joints

    Field: JointElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element.

    Field: JointObject
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the joint object from which the specified joint element was created. If the
    joint element was not created from a joint object, but instead was created as a result of
    internal meshing by the program then this item is reported as None.

    Page 1837 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GlobalX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global X coordinate of the specified joint element.

    Field: GlobalY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Y coordinate of the specified joint element.

    Field: GlobalZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    Global Z coordinate of the specified joint element.
    Table: Objects And Elements - Links

    Field: LinkElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a link element.

    Field: LinkObject
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the link object from which the specified link element was created.

    Field: ElemJtI
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element at the I-end of the link element.

    Field: ElemJtJ
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element at the J-end of the link element.
    Page 1838 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Objects And Elements - Solids

    Field: SolidElem
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a solid element.

    Field: SolidObject
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the solid object from which the specified solid element was created.

    Field: ElemJt1
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element that is a corner point of the solid element.

    Field: ElemJt2
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element that is a corner point of the solid element.

    Field: ElemJt3
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element that is a corner point of the solid element.

    Field: ElemJt4
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element that is a corner point of the solid element.

    Page 1839 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ElemJt5
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element that is a corner point of the solid element.

    Field: ElemJt6
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element that is a corner point of the solid element.

    Field: ElemJt7
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element that is a corner point of the solid element.

    Field: ElemJt8
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a joint element that is a corner point of the solid element.
    Table: Plot Function Traces

    Field: PFNamedSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of the plot function named set associated with this output.

    Field: PlotFunc
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of the plot function associated with this output.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.
    Page 1840 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.

    Page 1841 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: TransDispl
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    translational displacement value for the trace at the specified step.

    Field: RotDispl
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    rotational displacement value for the trace at the specified step.

    Field: Force
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    force value for the trace at the specified step.

    Field: Moment
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    moment value for the trace at the specified step.

    Field: FOverL
    Field is Imported: No
    Format: Force/Length (Forces section of form)
    Units: Force/Length
    force per unit length value for the trace at the specified step.

    Page 1842 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MOverL
    Field is Imported: No
    Format: Moment/Length (Forces section of form)
    Units: Force-Length/Length
    moment per unit length value for the trace at the specified step.

    Field: Stress
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    stress value for the trace at the specified step.

    Field: Energy
    Field is Imported: No
    Format: Energy (Miscellaneous section of form)
    Units: Force-Length
    energy value for the trace at the specified step.

    Field: TransVel
    Field is Imported: No
    Format: Velocity-Trans (Time-Related section of form)
    Units: Length/sec
    translational velocity value for the trace at the specified step.

    Field: RotVel
    Field is Imported: No
    Format: Velocity-Rot (Time-Related section of form)
    Units: rad/sec
    rotational velocity value for the trace at the specified step.

    Field: TransAccel
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    translational acceleration value for the trace at the specified step.

    Field: RotAccel
    Field is Imported: No
    Format: Acceleration-Rot (Time-Related section of form)
    Units: rad/sec2
    rotational acceleration value for the trace at the specified step.
    Table: Pushover Results - Force Displacement
    Page 1843 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PONamedSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The pushover named set associated with this data.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a nonlinear static load case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    Page 1844 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: BaseForce
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base force at the associated step in the nonlinear static load case. This force is equal
    to (FX^2 + FY^2 + FZ^2)^0.5.

    Field: Displ
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The monitored displacement at the associated step in the nonlinear static load case.

    Field: AtoB
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of hinges in the structure that fall between point A and point B on their hinge
    force-deformation curves.

    Field: BtoC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of hinges in the structure that fall between point B and point C on their hinge
    force-deformation curves.

    Page 1845 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtoD
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of hinges in the structure that fall between point C and point D on their hinge
    force-deformation curves.

    Field: DtoE
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of hinges in the structure that fall between point D and point E on their hinge
    force-deformation curves.

    Field: BeyondE
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of hinges beyond point E on their hinge force-deformation curves.

    Field: AtoIO
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of hinges in the structure that fall between point A and point IO on their hinge
    force-deformation curves.

    Field: IOtoLS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of hinges in the structure that fall between point IO and point LS on their
    hinge force-deformation curves.

    Field: LStoCP
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of hinges in the structure that fall between point LS and point CP on their
    hinge force-deformation curves.

    Page 1846 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeyondCP
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The number of hinges beyond point CP on their hinge force-deformation curves.

    Field: TotalHinges
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The total number of hinges in the structure.
    Table: Pushover Results - ATC40

    Field: PONamedSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The pushover named set associated with this data.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a nonlinear static load case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    Page 1847 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: SdCapacity
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The spectral displacement on the structure capacity curve at the associated step in the
    nonlinear static load case.

    Field: SaCapacity
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration on the structure capacity curve at the associated step in the
    nonlinear static load case expressed as a fraction of the gravitational constant, g.

    Page 1848 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SdDemand
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The spectral displacement for the locus of performance points (earthquake demand curve)
    at the associated step in the nonlinear static load case.

    Field: SaDemand
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration for the locus of performance points (earthquake demand curve)
    at the associated step in the nonlinear static load case expressed as a fraction of the
    gravitational constant, g.

    Field: Teff
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The effective period at the associated step in the nonlinear static load case.

    Field: Beff
    Field is Imported: No
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The effective damping ratio at the associated step in the nonlinear static load case.

    Field: Alpha
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The modal mass coefficient at the associated step in the nonlinear static load case. This
    item is used to convert the base shear to a spectral acceleration.

    Field: PFPhi
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The modal participation factor times the modal amplitude at the associated step in the
    nonlinear static load case. This item is used to convert the displacement to a spectral
    displacement.

    Page 1849 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PPtFound
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a performance point was found. Otherwise it is No.

    Field: PPtDispl
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The displacement at the performance point.

    Field: PPtShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear at the performance point.

    Field: PPtSD
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The spectral displacement at the performance point.

    Field: PPtSA
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at the performance point expressed as a fraction of the
    gravitational constant, g.

    Field: PPtTeff
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The effective period at the performance point.

    Field: PPtBeff
    Field is Imported: No
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The effective damping at the performance point.
    Page 1850 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Pushover Results - FEMA356

    Field: PONamedSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The pushover named set associated with this data.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a nonlinear static load case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Page 1851 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: BaseForce
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base force at the associated step in the nonlinear static load case. This force is equal
    to (FX^2 + FY^2 + FZ^2)^0.5.

    Field: Displ
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The monitored displacement at the associated step in the nonlinear static load case.

    Field: C0
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient C0, see FEMA 356 Equation 3-15.

    Page 1852 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: C1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient C1, see FEMA 356 Equation 3-15.

    Field: C2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient C2, see FEMA 356 Equation 3-15.

    Field: C3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient C3, see FEMA 356 Equation 3-15.

    Field: Sa
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Spectral acceleration expressed as a fraction of the gravitational constant, g, see FEMA
    356 Equation 3-15.

    Field: Te
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    Effective fundamental period of the structure in the direction considered, see FEMA 356
    Equations 3-14 and 3-15.

    Field: Ti
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    Elastic fundamental period of the structure in the direction considered, see FEMA 356
    Equation 3-14.

    Page 1853 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vy
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The yield force, see FEMA 356 Figure 3-1.

    Field: Ki
    Field is Imported: No
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The elsatic lateral stiffness of the structure in the direction considered, see FEMA 356
    Figure 3-1 and Equation 3-14.

    Field: Ke
    Field is Imported: No
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective lateral stiffness of the structure in the direction considered, see FEMA 356
    Figure 3-1 and Equation 3-14.

    Field: Alpha
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The ratio of post-yield stiffness divided by effective lateral stiffness of the structure in the
    direction considered, see FEMA 356 Figure 3-1.

    Field: R
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of elastic strength demand to calculated yield strength coefficient, see FEMA 356
    Equation 3-16.

    Field: Weight
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The effective seismic weight, see FEMA 356 Equation 3-16.

    Page 1854 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The effective mass factor, see FEMA 356 Equation 3-16.

    Field: TDFound
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target displacement was found. Otherwise it is No.

    Field: TDDispl
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The target displacement.

    Field: TDShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear at the target displacement.
    Table: Pushover Results - FEMA440 Displacement Modification

    Field: PONamedSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The pushover named set associated with this data.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a nonlinear static load case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    Page 1855 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Page 1856 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BaseForce
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base force at the associated step in the nonlinear static load case. This force is equal
    to (FX^2 + FY^2 + FZ^2)^0.5.

    Field: Displ
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The monitored displacement at the associated step in the nonlinear static load case.

    Field: C0
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient C0, see FEMA 356 Equation 3-15.

    Field: C1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient C1, see FEMA 440 Equation 5-1.

    Field: C2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient C2, see FEMA 440 Equation 5-2.

    Field: Sa
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Spectral acceleration expressed as a fraction of the gravitational constant, g, see FEMA
    356 Equation 3-15.

    Page 1857 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Te
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    Effective fundamental period of the structure in the direction considered, see FEMA 356
    Equations 3-14 and 3-15.

    Field: Ti
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    Elastic fundamental period of the structure in the direction considered, see FEMA 356
    Equation 3-14.

    Field: Vy
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The yield force, see FEMA 356 Figure 3-1.

    Field: Dy
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The yield displacement, see FEMA 356 Figure 3-1.

    Field: Ki
    Field is Imported: No
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The elsatic lateral stiffness of the structure in the direction considered, see FEMA 356
    Figure 3-1 and Equation 3-14.

    Field: Ke
    Field is Imported: No
    Format: Translational Stiffness (Stiffness section of form)
    Units: Force/Length
    The effective lateral stiffness of the structure in the direction considered, see FEMA 356
    Figure 3-1 and Equation 3-14.

    Page 1858 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Alpha
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The ratio of post-yield stiffness divided by effective lateral stiffness of the structure in the
    direction considered, see FEMA 356 Figure 3-1.

    Field: R
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of elastic strength demand to calculated yield strength coefficient, see FEMA 356
    Equation 3-16.

    Field: Weight
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The effective seismic weight, see FEMA 356 Equation 3-16.

    Field: Cm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The effective mass factor, see FEMA 356 Equation 3-16.

    Field: TDFound
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a target displacement was found. Otherwise it is No.

    Field: TDDispl
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The target displacement.

    Page 1859 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TDShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear at the target displacement.
    Table: Pushover Results - FEMA440 Equivalent Linearization

    Field: PONamedSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The pushover named set associated with this data.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a nonlinear static load case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.
    Page 1860 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: SdCapacity
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The spectral displacement on the structure capacity curve at the associated step in the
    nonlinear static load case.

    Field: SaCapacity
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration on the structure capacity curve at the associated step in the
    nonlinear static load case expressed as a fraction of the gravitational constant, g.

    Field: SdDemand
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The spectral displacement for the locus of performance points (MADRS earthquake
    demand curve) at the associated step in the nonlinear static load case.

    Page 1861 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SaDemand
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration for the locus of performance points (MADRS earthquake
    demand curve) at the associated step in the nonlinear static load case expressed as a
    fraction of the gravitational constant, g.

    Field: Teff
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The effective period, see FEMA 400 Section 6.2.2.

    Field: Tsecant
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The secant period, see FEMA 440 Equation 6-15.

    Field: Beff
    Field is Imported: No
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The effective equivalent viscous damping ratio, see FEMA 400 Section 6.2.1.

    Field: Ductility
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ductility, see FEMA 440 Equation 6-19.

    Field: Alpha
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Post-Elastic stiffness, see FEMA 440 Equation 6-18.

    Page 1862 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ModFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The ADRS modification factor, see FEMA 440 Equation 6-14.

    Field: PPtFound
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a performance point was found. Otherwise it is No.

    Field: PPtDispl
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The displacement at the performance point.

    Field: PPtShear
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The base shear at the performance point.

    Field: PPtSD
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The spectral displacement at the performance point.

    Field: PPtSA
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The spectral acceleration at the performance point expressed as a fraction of the
    gravitational constant, g.

    Field: PPtTSecant
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    The secant period at the performance point.
    Page 1863 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PPtDuctility
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The ductility ratio at the performance point.

    Field: PPtBeff
    Field is Imported: No
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The effective damping at the performance point.

    Field: PPtModFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The ADRS modification factor at the performance point.
    Table: Response Spectrum Modal Information

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a response spectrum load case.

    Field: ModalCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of the modal load case used for the response spectrum case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.

    Page 1864 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    Period of the specified mode.

    Page 1865 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DampRatio
    Field is Imported: No
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The damping ratio.

    Field: U1Acc
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The response spectrum modal ground acceleration in the local U1direction of the response
    spectrum local axes.

    Field: U2Acc
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The response spectrum modal ground acceleration in the local U2direction of the response
    spectrum local axes.

    Field: U3Acc
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The response spectrum modal ground acceleration in the local U3direction of the response
    spectrum local axes.

    Field: U1Amp
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The response spectrum modal amplitude in the local U1 direction of the response
    spectrum local axes.

    Field: U2Amp
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The response spectrum modal amplitude in the local U2 direction of the response
    spectrum local axes.

    Page 1866 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: U3Amp
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The response spectrum modal amplitude in the local U3 direction of the response
    spectrum local axes.
    Table: Response Spectrum Modal Information - Displacement Loading

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a response spectrum load case.

    Field: ModalCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of the modal load case used for the response spectrum case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.
    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.

    Page 1867 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: Period
    Field is Imported: No
    Format: Period (Time-Related section of form)
    Units: Sec
    Period of the specified mode.

    Field: DampRatio
    Field is Imported: No
    Format: Damping Ratios (Damping Items section of form)
    Units: Unitless
    The damping ratio.

    Field: LoadName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is the name of a load pattern applied as load inertia.

    Page 1868 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Acc
    Field is Imported: No
    Format: Acceleration-Trans (Time-Related section of form)
    Units: Length/sec2
    The magnitude of the acceleration applied to the deflected shape due to the load pattern.

    Field: Amp
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    The response spectrum modal amplitude for the load pattern applied as load inertia.
    Table: Section Cut Forces - Analysis

    Field: SectionCut
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a section cut.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.
    For modal cases this is Mode.

    Page 1869 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.

    Page 1870 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: F1
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The section cut force component in the section cut local 1 direction.

    Field: F2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The section cut force component in the section cut local 2 direction.

    Field: F3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The section cut force component in the section cut local 3 direction.

    Field: M1
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The section cut moment component about the section cut local 1 axis.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The section cut moment component about the section cut local 2 axis.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The section cut moment component about the section cut local 3 axis.

    Field: GlobalX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the point where the section cut force is reported.

    Page 1871 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GlobalY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the point where the section cut force is reported.

    Field: GlobalZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the point where the section cut force is reported.

    Field: DirCos1X
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 1 axis relative to the positive global X
    axis.

    Field: DirCos1Y
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 1 axis relative to the positive global Y
    axis.

    Field: DirCos1Z
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 1 axis relative to the positive global Z
    axis.

    Field: DirCos2X
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 2 axis relative to the positive global X
    axis.

    Page 1872 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DirCos2Y
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 2 axis relative to the positive global Y
    axis.

    Field: DirCos2Z
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 2 axis relative to the positive global Z
    axis.

    Field: DirCos3X
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 3 axis relative to the positive global X
    axis.

    Field: DirCos3Y
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 3 axis relative to the positive global Y
    axis.

    Field: DirCos3Z
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 3 axis relative to the positive global Z
    axis.

    Field: 1CentroidF1
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 1 coordinate of the centroid of all forces (in the 1 direction) that contribute to
    F1. It is zero if F1 = 0.

    Page 1873 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: 2CentroidF1
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 2 coordinate of the centroid of all forces (in the 1 direction) that contribute to
    F1, that is, the location where the forces cause zero moment M3. It is zero if F1 = 0.

    Field: 3CentroidF1
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 3 coordinate of the centroid of all forces (in the 1 direction) that contribute to
    F1, that is, the location where the forces cause zero moment M2. It is zero if F1 = 0.

    Field: 1CentroidF2
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 1 coordinate of the centroid of all forces (in the 2 direction) that contribute to
    F2, that is, the location where the forces cause zero moment M3. It is zero if F2 = 0.

    Field: 2CentroidF2
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 2 coordinate of the centroid of all forces (in the 2 direction) that contribute to
    F2. It is zero if F2 = 0.

    Field: 3CentroidF2
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 3 coordinate of the centroid of all forces (in the 2 direction) that contribute to
    F2, that is, the location where the forces cause zero moment M1. It is zero if F2 = 0.

    Field: 1CentroidF3
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 1 coordinate of the centroid of all forces (in the 3 direction) that contribute to
    F3, that is, the location where the forces cause zero moment M2. It is zero if F3 = 0.

    Page 1874 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: 2CentroidF3
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 2 coordinate of the centroid of all forces (in the 3 direction) that contribute to
    F3, that is, the location where the forces cause zero moment M1. It is zero if F3 = 0.

    Field: 3CentroidF3
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 3 coordinate of the centroid of all forces (in the 3 direction) that contribute to
    F3. It is zero if F3 = 0.
    Table: Section Cut Forces - Design

    Field: SectionCut
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of a section cut.

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this is either Step, Max, or Min.

    Page 1875 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For modal cases this is Mode.


    For buckling factors this is Mode which refers to the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this is either Time, Max or Min.
    For steady state and power spectral density load cases this is either Real at Freq, Imag at
    Freq, Real Min, Real Max, Imag Min, Imag Max, Mag at Freq, Mag Min, Mag Max, or
    RMS. Freq is short for frequency, Imag is short for imaginary and Mag is short for
    magnitude.
    For double-valued combinations this is either Max or Min.
    For moving load cases this is the force correspondence if it has been requested. It may be
    M3 Min, M3 Max, M2 Min, M2 Max, T Min, T Max, V3 Min, V3 Max, V2 Min, V2 Max,
    P Min, or P Max.

    Field: StepNum
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The contents of this field vary depending on the type of output case considered.
    For linear static and response spectrum load cases this field is not used.
    For nonlinear static load cases this field reports the step number when the StepType is
    Step.
    For modal cases this field reports the mode number.
    For buckling factors this field reports the buckling mode number.
    For linear modal history, nonlinear modal history, linear direct integration history, and
    nonlinear direct integration history cases this field reports the time in seconds when the
    StepType is Time.
    For steady state and power spectral density load cases this field reports the frequency in
    Hz when the StepType is Real at Freq, Imag at Freq, or Mag at Freq.

    Field: StepLabel
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This field is only used for the nonlinear staged-construction load cases and is present only
    when the StepType is Step. Otherwise this field is blank. When present, the StepLabel
    reports the stage name, the step number within the stage, and for time-dependent analysis,
    the current age (in days) of the analysis.
    Page 1876 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The section cut force component in the section cut local 1 direction.

    Field: V2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The section cut force component in the section cut local 2 direction.

    Field: V3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The section cut force component in the section cut local 3 direction.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The section cut moment component about the section cut local 1 axis.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The section cut moment component about the section cut local 2 axis.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The section cut moment component about the section cut local 3 axis.

    Field: GlobalX
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global X coordinate of the point where the section cut force is reported.

    Page 1877 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GlobalY
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Y coordinate of the point where the section cut force is reported.

    Field: GlobalZ
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global Z coordinate of the point where the section cut force is reported.

    Field: DirCos1X
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 1 axis relative to the positive global X
    axis.

    Field: DirCos1Y
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 1 axis relative to the positive global Y
    axis.

    Field: DirCos1Z
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 1 axis relative to the positive global Z
    axis.

    Field: DirCos2X
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 2 axis relative to the positive global X
    axis.

    Page 1878 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DirCos2Y
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 2 axis relative to the positive global Y
    axis.

    Field: DirCos2Z
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 2 axis relative to the positive global Z
    axis.

    Field: DirCos3X
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 3 axis relative to the positive global X
    axis.

    Field: DirCos3Y
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 3 axis relative to the positive global Y
    axis.

    Field: DirCos3Z
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The direction cosine of the section cut positive local 3 axis relative to the positive global Z
    axis.

    Field: 1CentroidF1
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 1 coordinate of the centroid of all forces (in the 1 direction) that contribute to
    F1. It is zero if F1 = 0.

    Page 1879 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: 2CentroidF1
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 2 coordinate of the centroid of all forces (in the 1 direction) that contribute to
    F1, that is, the location where the forces cause zero moment M3. It is zero if F1 = 0.

    Field: 3CentroidF1
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 3 coordinate of the centroid of all forces (in the 1 direction) that contribute to
    F1, that is, the location where the forces cause zero moment M2. It is zero if F1 = 0.

    Field: 1CentroidF2
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 1 coordinate of the centroid of all forces (in the 2 direction) that contribute to
    F2, that is, the location where the forces cause zero moment M3. It is zero if F2 = 0.

    Field: 2CentroidF2
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 2 coordinate of the centroid of all forces (in the 2 direction) that contribute to
    F2. It is zero if F2 = 0.

    Field: 3CentroidF2
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 3 coordinate of the centroid of all forces (in the 2 direction) that contribute to
    F2, that is, the location where the forces cause zero moment M1. It is zero if F2 = 0.

    Field: 1CentroidF3
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 1 coordinate of the centroid of all forces (in the 3 direction) that contribute to
    F3, that is, the location where the forces cause zero moment M2. It is zero if F3 = 0.

    Page 1880 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: 2CentroidF3
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 2 coordinate of the centroid of all forces (in the 3 direction) that contribute to
    F3, that is, the location where the forces cause zero moment M1. It is zero if F3 = 0.

    Field: 3CentroidF3
    Field is Imported: No
    Format: Coordinates (Structure Dimensions section of form)
    Units: Length
    The global 3 coordinate of the centroid of all forces (in the 3 direction) that contribute to
    F3. It is zero if F3 = 0.
    Table: Total Energy Components

    Field: OutputCase
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a load case or load combination.

    Field: CaseType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type of output case.

    Field: Input
    Field is Imported: No
    Format: Energy (Miscellaneous section of form)
    Units: Force-Length
    The total input energy.

    Field: Kinetic
    Field is Imported: No
    Format: Energy (Miscellaneous section of form)
    Units: Force-Length
    The total stored kinetic energy.

    Page 1881 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Potential
    Field is Imported: No
    Format: Energy (Miscellaneous section of form)
    Units: Force-Length
    The total stored potential energy.

    Field: ModalDamp
    Field is Imported: No
    Format: Energy (Miscellaneous section of form)
    Units: Force-Length
    The total dissipated modal damping energy.

    Field: LinkDampers
    Field is Imported: No
    Format: Energy (Miscellaneous section of form)
    Units: Force-Length
    The total energy dissipated in the damper-type link elements.

    Field: LinkHystrtc
    Field is Imported: No
    Format: Energy (Miscellaneous section of form)
    Units: Force-Length
    The total energy dissipated through hysteresis of link elements.

    Field: Error
    Field is Imported: No
    Format: Energy (Miscellaneous section of form)
    Units: Force-Length
    The total energy error. This is equal to the total input energy minus all other energies.
    Table: Aluminum Design 1 - Summary Data - AA-ASD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.
    Page 1882 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The controlling stress ratio at the specified location.

    Field: RatioType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either PMM, Major Shear, Minor Shear, or Other indicating the origin of the
    reported stress ratio.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 1883 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Aluminum Design 1 - Summary Data - AA-LRFD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Page 1884 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The controlling stress ratio at the specified location.

    Field: RatioType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either PMM, Major Shear, Minor Shear, or Other indicating the origin of the
    reported stress ratio.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Aluminum Design 2 - PMM Details - AA-ASD 2000

    Page 1885 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.
    Page 1886 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load for the specified combo.

    Field: MMajor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The major bending moment for the specified combo.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MMinor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The minor bending moment for the specified combo.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: VMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor shear for the specified combo.

    Page 1887 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The torsion (about the local 1-axis) for the specified combo. This item is reported for
    information only. It is not used in the design.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The equation used to obtain the reported ratios.

    Field: TotalRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The total PMM stress ratio. This ratio is the sum of the axial, major moment and minor
    moment stress ratio components.

    Field: PRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial component of the total PMM stress ratio. The total PMM stress ratio consists of
    the sum of the axial, major moment and minor moment components.

    Field: MMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1888 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: PDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The design axial force.

    Field: ffa
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design axial stress.

    Field: Fa
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress.

    Field: Ft
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial tensile stress.

    Page 1889 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FcFlange
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress considering uniform compression in flange.

    Field: FcWeb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress considering uniform compression in web.

    Field: Fac0
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The weighted average allowable axial compressive stress considering uniform
    compression in flange and web and considering short column.

    Field: Fec
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The elastic critical stress considering Euler buckling.

    Field: Fcr
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The element local buckling stress for axial compression. For sections with web and flange,
    the minimum local buckling stress based on individual buckling of flange or web is taken
    as Fcr.

    Field: Frc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress for members with buckled elements.

    Page 1890 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMajDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design major moment. This moment includes applicable amplification factors, if any.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: ffbMajor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design major moment bending stress.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FbMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major axis bending stress.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FeMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Euler stress for major axis bending stress divided by a factor of safety.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1891 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FbMajorT
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable tensile stress for major axis bending.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FbMajFlange
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major axis bending compressive stress considering individual element
    (flange) buckling.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FbMajWeb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major axis bending compressive stress considering individual element
    (web) buckling.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FebMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The elastic lateral buckling stress of beam bent about major axis
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1892 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FcrMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The element local buckling stress for major axis bending. For sections with web and
    flange, the minimum local buckling stress based on individual buckling of flange or web is
    taken as FcrMajor.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FrbMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable compressive stress for for major axis bending of section with buckled
    elements
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for major axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: KMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object local major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1893 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LRatioMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Cb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending stress.

    Field: C1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient defined in section 4.9.4 and used in calculating Rey.

    Field: C2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient defined in section 4.9.4 and used in calculating Rey.

    Field: MMinDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design minor moment. This moment includes applicable amplification factors, if any.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1894 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ffbMinor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design minor moment bending stress.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FbMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor axis bending stress.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FeMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Euler stress for minor axis bending stress divided by a factor of safety.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FbMinorT
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable tensile stress for minor axis bending.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1895 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FbMinFlange
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor axis bending compressive stress considering individual element
    (flange) buckling.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FbMinWeb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor axis bending compressive stress considering individual element
    (web) buckling.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FebMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The elastic lateral buckling stress of beam bent about minor axis
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FcrMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The element local buckling stress for minor axis bending. For sections with web and
    flange, the minimum local buckling stress based on individual buckling of flange or web is
    taken as FcrMinor.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1896 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrbMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable compressive stress for for minor axis bending of section with buckled
    elements
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for minor axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: LRatioMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Page 1897 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Designation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Material designation of aluminum indicating alloy and temper.

    Field: Fcy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Compressive yield stress.

    Field: Fty
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile yield stress.

    Field: Fsy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear yield stress.

    Field: Fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Yield stress which is the minimum of Fcy and Fty.

    Field: Ftu
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile ultimate strength.

    Field: Fsu
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear ultimate strength.

    Page 1898 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Length
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total length of the frame object (not clear length).

    Field: SectClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Compact, Non-Compact, Slender or Too Slender indicating the classification
    of the section.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Aluminum Design 2 - PMM Details - AA-LRFD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1899 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load for the specified combo.
    Page 1900 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMajor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The major bending moment for the specified combo.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MMinor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The minor bending moment for the specified combo.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: VMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor shear for the specified combo.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 1901 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The torsion (about the local 1-axis) for the specified combo. This item is reported for
    information only. It is not used in the design.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The equation used to obtain the reported ratios.

    Field: TotalRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The total PMM stress ratio. This ratio is the sum of the axial, major moment and minor
    moment stress ratio components.

    Field: PRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial component of the total PMM stress ratio. The total PMM stress ratio consists of
    the sum of the axial, major moment and minor moment components.

    Field: MMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1902 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: PDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The design axial force.

    Field: ffa
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design axial stress.

    Field: Fa
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress.

    Field: Ft
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial tensile stress.

    Page 1903 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FcFlange
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress considering uniform compression in flange.

    Field: FcWeb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress considering uniform compression in web.

    Field: Fac0
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The weighted average allowable axial compressive stress considering uniform
    compression in flange and web and considering short column.

    Field: Fec
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The elastic critical stress considering Euler buckling.

    Field: Fcr
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The element local buckling stress for axial compression. For sections with web and flange,
    the minimum local buckling stress based on individual buckling of flange or web is taken
    as Fcr.

    Field: Frc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress for members with buckled elements.

    Page 1904 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMajDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design major moment. This moment includes applicable amplification factors, if any.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: ffbMajor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design major moment bending stress.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FbMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major axis bending stress.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FeMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Euler stress for major axis bending stress divided by a factor of safety.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1905 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FbMajorT
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable tensile stress for major axis bending.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FbMajFlange
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major axis bending compressive stress considering individual element
    (flange) buckling.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FbMajWeb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major axis bending compressive stress considering individual element
    (web) buckling.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FebMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The elastic lateral buckling stress of beam bent about major axis
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1906 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FcrMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The element local buckling stress for major axis bending. For sections with web and
    flange, the minimum local buckling stress based on individual buckling of flange or web is
    taken as FcrMajor.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FrbMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable compressive stress for for major axis bending of section with buckled
    elements
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for major axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: KMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object local major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1907 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LRatioMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Cb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending stress.

    Field: C1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient defined in section 4.9.4 and used in calculating Rey.

    Field: C2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient defined in section 4.9.4 and used in calculating Rey.

    Field: MMinDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design minor moment. This moment includes applicable amplification factors, if any.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1908 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ffbMinor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design minor moment bending stress.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FbMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor axis bending stress.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FeMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Euler stress for minor axis bending stress divided by a factor of safety.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FbMinorT
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable tensile stress for minor axis bending.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1909 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FbMinFlange
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor axis bending compressive stress considering individual element
    (flange) buckling.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FbMinWeb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor axis bending compressive stress considering individual element
    (web) buckling.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FebMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The elastic lateral buckling stress of beam bent about minor axis
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FcrMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The element local buckling stress for minor axis bending. For sections with web and
    flange, the minimum local buckling stress based on individual buckling of flange or web is
    taken as FcrMinor.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1910 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrbMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable compressive stress for for minor axis bending of section with buckled
    elements
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for minor axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: LRatioMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Page 1911 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Designation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Material designation of aluminum indicating alloy and temper.

    Field: Fcy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Compressive yield stress.

    Field: Fty
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile yield stress.

    Field: Fsy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear yield stress.

    Field: Fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Yield stress which is the minimum of Fcy and Fty.

    Field: Ftu
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile ultimate strength.

    Field: Fsu
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear ultimate strength.

    Page 1912 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Length
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total length of the frame object (not clear length).

    Field: SectClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Compact, Non-Compact, Slender or Too Slender indicating the classification
    of the section.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Aluminum Design 3 - Shear Details - AA-ASD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1913 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Field: VMajorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear data is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 1914 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major shear stress ratio.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: ffvMajor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design major shear stress.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: FvMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major direction shear.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 1915 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear data is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: VMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor shear for the specified combo.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor shear stress ratio.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 1916 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ffvMinor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design minor shear stress.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: FvMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor direction shear.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The torsion (about the local 1-axis) for the specified combo. This item is reported for
    information only. It is not used in the design.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Page 1917 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Aluminum Design 3 - Shear Details - AA-LRFD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Page 1918 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear data is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: VMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major shear stress ratio.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 1919 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ffvMajor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design major shear stress.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: FvMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major direction shear.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear data is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.
    Page 1920 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor shear for the specified combo.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor shear stress ratio.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ffvMinor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design minor shear stress.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: FvMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor direction shear.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 1921 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The torsion (about the local 1-axis) for the specified combo. This item is reported for
    information only. It is not used in the design.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Aluminum Design 4 - Buckling Constants - AA-ASD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1922 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Designation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Material designation of aluminum indicating alloy and temper.

    Field: Fcy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Compressive yield stress.

    Field: Fty
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile yield stress.

    Field: Fsy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear yield stress.

    Field: Fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Yield stress which is the minimum of Fcy and Fty.

    Page 1923 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Bc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bc.

    Field: Bp
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bp.

    Field: Bt
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bt.

    Field: Bbr
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bbr.

    Field: Btb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Btb.

    Field: Bs
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bs.

    Field: Dc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dc.

    Page 1924 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Dp
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dp.

    Field: Dt
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dt.

    Field: Dbr
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dbr.

    Field: Dtb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dtb.

    Field: Ds
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Ds.

    Field: Cc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cc.

    Field: Cp
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cp.

    Page 1925 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ct
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Ct.

    Field: Cbr
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cbr.

    Field: Ctb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Ctb.

    Field: Cs
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cs.

    Field: k1c
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k1 for compression.

    Field: k2c
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k2 for compression.

    Field: k1b
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k1 for bending.

    Page 1926 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: k2b
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k2 for bending.

    Field: kt
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient kt (see AA Table 3.4-2).
    Table: Aluminum Design 4 - Buckling Constants - AA-LRFD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Designation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Material designation of aluminum indicating alloy and temper.

    Field: Fcy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Compressive yield stress.
    Page 1927 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fty
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile yield stress.

    Field: Fsy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear yield stress.

    Field: Fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Yield stress which is the minimum of Fcy and Fty.

    Field: Bc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bc.

    Field: Bp
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bp.

    Field: Bt
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bt.

    Field: Bbr
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bbr.

    Page 1928 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Btb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Btb.

    Field: Bs
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bs.

    Field: Dc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dc.

    Field: Dp
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dp.

    Field: Dt
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dt.

    Field: Dbr
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dbr.

    Field: Dtb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dtb.

    Page 1929 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ds
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Ds.

    Field: Cc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cc.

    Field: Cp
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cp.

    Field: Ct
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Ct.

    Field: Cbr
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cbr.

    Field: Ctb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Ctb.

    Field: Cs
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cs.

    Page 1930 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: k1c
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k1 for compression.

    Field: k2c
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k2 for compression.

    Field: k1b
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k1 for bending.

    Field: k2b
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k2 for bending.

    Field: kt
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient kt (see AA Table 3.4-2).
    Table: Aluminum Details 1 - Summary Data - AA-ASD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.
    Page 1931 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The controlling stress ratio at the specified location.

    Field: RatioType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either PMM, Major Shear, Minor Shear, or Other indicating the origin of the
    reported stress ratio.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 1932 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Aluminum Details 1 - Summary Data - AA-LRFD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Page 1933 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The controlling stress ratio at the specified location.

    Field: RatioType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either PMM, Major Shear, Minor Shear, or Other indicating the origin of the
    reported stress ratio.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Aluminum Details 2 - PMM Details - AA-ASD 2000

    Page 1934 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.
    Page 1935 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load for the specified combo.

    Field: MMajor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The major bending moment for the specified combo.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MMinor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The minor bending moment for the specified combo.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: VMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor shear for the specified combo.

    Page 1936 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The torsion (about the local 1-axis) for the specified combo. This item is reported for
    information only. It is not used in the design.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The equation used to obtain the reported ratios.

    Field: TotalRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The total PMM stress ratio. This ratio is the sum of the axial, major moment and minor
    moment stress ratio components.

    Field: PRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial component of the total PMM stress ratio. The total PMM stress ratio consists of
    the sum of the axial, major moment and minor moment components.

    Field: MMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1937 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: PDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The design axial force.

    Field: ffa
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design axial stress.

    Field: Fa
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress.

    Field: Ft
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial tensile stress.

    Page 1938 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FcFlange
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress considering uniform compression in flange.

    Field: FcWeb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress considering uniform compression in web.

    Field: Fac0
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The weighted average allowable axial compressive stress considering uniform
    compression in flange and web and considering short column.

    Field: Fec
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The elastic critical stress considering Euler buckling.

    Field: Fcr
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The element local buckling stress for axial compression. For sections with web and flange,
    the minimum local buckling stress based on individual buckling of flange or web is taken
    as Fcr.

    Field: Frc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress for members with buckled elements.

    Page 1939 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMajDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design major moment. This moment includes applicable amplification factors, if any.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: ffbMajor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design major moment bending stress.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FbMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major axis bending stress.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FeMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Euler stress for major axis bending stress divided by a factor of safety.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1940 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FbMajorT
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable tensile stress for major axis bending.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FbMajFlange
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major axis bending compressive stress considering individual element
    (flange) buckling.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FbMajWeb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major axis bending compressive stress considering individual element
    (web) buckling.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FebMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The elastic lateral buckling stress of beam bent about major axis
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1941 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FcrMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The element local buckling stress for major axis bending. For sections with web and
    flange, the minimum local buckling stress based on individual buckling of flange or web is
    taken as FcrMajor.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FrbMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable compressive stress for for major axis bending of section with buckled
    elements
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for major axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: KMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object local major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1942 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LRatioMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Cb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending stress.

    Field: C1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient defined in section 4.9.4 and used in calculating Rey.

    Field: C2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient defined in section 4.9.4 and used in calculating Rey.

    Field: MMinDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design minor moment. This moment includes applicable amplification factors, if any.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1943 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ffbMinor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design minor moment bending stress.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FbMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor axis bending stress.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FeMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Euler stress for minor axis bending stress divided by a factor of safety.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FbMinorT
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable tensile stress for minor axis bending.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1944 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FbMinFlange
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor axis bending compressive stress considering individual element
    (flange) buckling.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FbMinWeb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor axis bending compressive stress considering individual element
    (web) buckling.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FebMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The elastic lateral buckling stress of beam bent about minor axis
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FcrMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The element local buckling stress for minor axis bending. For sections with web and
    flange, the minimum local buckling stress based on individual buckling of flange or web is
    taken as FcrMinor.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1945 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrbMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable compressive stress for for minor axis bending of section with buckled
    elements
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for minor axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: LRatioMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Page 1946 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Designation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Material designation of aluminum indicating alloy and temper.

    Field: Fcy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Compressive yield stress.

    Field: Fty
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile yield stress.

    Field: Fsy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear yield stress.

    Field: Fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Yield stress which is the minimum of Fcy and Fty.

    Field: Ftu
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile ultimate strength.

    Field: Fsu
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear ultimate strength.

    Page 1947 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Length
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total length of the frame object (not clear length).

    Field: SectClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Compact, Non-Compact, Slender or Too Slender indicating the classification
    of the section.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Aluminum Details 2 - PMM Details - AA-LRFD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1948 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load for the specified combo.
    Page 1949 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMajor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The major bending moment for the specified combo.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MMinor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The minor bending moment for the specified combo.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: VMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor shear for the specified combo.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 1950 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The torsion (about the local 1-axis) for the specified combo. This item is reported for
    information only. It is not used in the design.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The equation used to obtain the reported ratios.

    Field: TotalRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The total PMM stress ratio. This ratio is the sum of the axial, major moment and minor
    moment stress ratio components.

    Field: PRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial component of the total PMM stress ratio. The total PMM stress ratio consists of
    the sum of the axial, major moment and minor moment components.

    Field: MMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1951 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: PDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The design axial force.

    Field: ffa
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design axial stress.

    Field: Fa
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress.

    Field: Ft
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial tensile stress.

    Page 1952 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FcFlange
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress considering uniform compression in flange.

    Field: FcWeb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress considering uniform compression in web.

    Field: Fac0
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The weighted average allowable axial compressive stress considering uniform
    compression in flange and web and considering short column.

    Field: Fec
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The elastic critical stress considering Euler buckling.

    Field: Fcr
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The element local buckling stress for axial compression. For sections with web and flange,
    the minimum local buckling stress based on individual buckling of flange or web is taken
    as Fcr.

    Field: Frc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable axial compressive stress for members with buckled elements.

    Page 1953 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMajDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design major moment. This moment includes applicable amplification factors, if any.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: ffbMajor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design major moment bending stress.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FbMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major axis bending stress.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FeMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Euler stress for major axis bending stress divided by a factor of safety.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1954 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FbMajorT
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable tensile stress for major axis bending.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FbMajFlange
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major axis bending compressive stress considering individual element
    (flange) buckling.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FbMajWeb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major axis bending compressive stress considering individual element
    (web) buckling.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FebMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The elastic lateral buckling stress of beam bent about major axis
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 1955 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FcrMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The element local buckling stress for major axis bending. For sections with web and
    flange, the minimum local buckling stress based on individual buckling of flange or web is
    taken as FcrMajor.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: FrbMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable compressive stress for for major axis bending of section with buckled
    elements
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for major axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: KMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object local major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 1956 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LRatioMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Cb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, used in determining the allowable bending stress.

    Field: C1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient defined in section 4.9.4 and used in calculating Rey.

    Field: C2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient defined in section 4.9.4 and used in calculating Rey.

    Field: MMinDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design minor moment. This moment includes applicable amplification factors, if any.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1957 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ffbMinor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design minor moment bending stress.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FbMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor axis bending stress.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FeMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Euler stress for minor axis bending stress divided by a factor of safety.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FbMinorT
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable tensile stress for minor axis bending.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1958 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FbMinFlange
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor axis bending compressive stress considering individual element
    (flange) buckling.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FbMinWeb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor axis bending compressive stress considering individual element
    (web) buckling.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FebMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The elastic lateral buckling stress of beam bent about minor axis
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: FcrMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The element local buckling stress for minor axis bending. For sections with web and
    flange, the minimum local buckling stress based on individual buckling of flange or web is
    taken as FcrMinor.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 1959 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrbMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable compressive stress for for minor axis bending of section with buckled
    elements
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for minor axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: LRatioMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.
    Page 1960 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Designation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Material designation of aluminum indicating alloy and temper.

    Field: Fcy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Compressive yield stress.

    Field: Fty
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile yield stress.

    Field: Fsy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear yield stress.

    Field: Fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Yield stress which is the minimum of Fcy and Fty.

    Field: Ftu
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile ultimate strength.

    Field: Fsu
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear ultimate strength.

    Page 1961 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Length
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total length of the frame object (not clear length).

    Field: SectClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Compact, Non-Compact, Slender or Too Slender indicating the classification
    of the section.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Aluminum Details 3 - Shear Details - AA-ASD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1962 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Field: VMajorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear data is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 1963 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major shear stress ratio.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: ffvMajor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design major shear stress.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: FvMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major direction shear.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 1964 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear data is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: VMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor shear for the specified combo.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor shear stress ratio.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 1965 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ffvMinor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design minor shear stress.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: FvMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor direction shear.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The torsion (about the local 1-axis) for the specified combo. This item is reported for
    information only. It is not used in the design.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Page 1966 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Aluminum Details 3 - Shear Details - AA-LRFD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Page 1967 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear data is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: VMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major shear stress ratio.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 1968 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ffvMajor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design major shear stress.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: FvMajor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable major direction shear.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear data is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.
    Page 1969 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor shear for the specified combo.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor shear stress ratio.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ffvMinor
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The design minor shear stress.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: FvMinor
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The allowable minor direction shear.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 1970 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The torsion (about the local 1-axis) for the specified combo. This item is reported for
    information only. It is not used in the design.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Aluminum Details 4 - Buckling Constants - AA-ASD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 1971 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Designation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Material designation of aluminum indicating alloy and temper.

    Field: Fcy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Compressive yield stress.

    Field: Fty
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile yield stress.

    Field: Fsy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear yield stress.

    Field: Fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Yield stress which is the minimum of Fcy and Fty.

    Page 1972 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Bc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bc.

    Field: Bp
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bp.

    Field: Bt
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bt.

    Field: Bbr
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bbr.

    Field: Btb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Btb.

    Field: Bs
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bs.

    Field: Dc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dc.

    Page 1973 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Dp
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dp.

    Field: Dt
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dt.

    Field: Dbr
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dbr.

    Field: Dtb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dtb.

    Field: Ds
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Ds.

    Field: Cc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cc.

    Field: Cp
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cp.

    Page 1974 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ct
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Ct.

    Field: Cbr
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cbr.

    Field: Ctb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Ctb.

    Field: Cs
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cs.

    Field: k1c
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k1 for compression.

    Field: k2c
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k2 for compression.

    Field: k1b
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k1 for bending.

    Page 1975 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: k2b
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k2 for bending.

    Field: kt
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient kt (see AA Table 3.4-2).
    Table: Aluminum Details 4 - Buckling Constants - AA-LRFD 2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Designation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Material designation of aluminum indicating alloy and temper.

    Field: Fcy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Compressive yield stress.
    Page 1976 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fty
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Tensile yield stress.

    Field: Fsy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Shear yield stress.

    Field: Fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Yield stress which is the minimum of Fcy and Fty.

    Field: Bc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bc.

    Field: Bp
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bp.

    Field: Bt
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bt.

    Field: Bbr
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bbr.

    Page 1977 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Btb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Btb.

    Field: Bs
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Bs.

    Field: Dc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dc.

    Field: Dp
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dp.

    Field: Dt
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dt.

    Field: Dbr
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dbr.

    Field: Dtb
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Dtb.

    Page 1978 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ds
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    Buckling constant, Ds.

    Field: Cc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cc.

    Field: Cp
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cp.

    Field: Ct
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Ct.

    Field: Cbr
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cbr.

    Field: Ctb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Ctb.

    Field: Cs
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant, Cs.

    Page 1979 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: k1c
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k1 for compression.

    Field: k2c
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k2 for compression.

    Field: k1b
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k1 for bending.

    Field: k2b
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Buckling constant k2 for bending.

    Field: kt
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient kt (see AA Table 3.4-2).
    Table: API Punch Check 1 - Summary Data - API RP2A-LRFD 97

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.
    Page 1980 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Page 1981 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: API Punch Check 1 - Summary Data - API RP2A-WSD2000

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.
    Page 1982 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: NS Punch Check 1 - Summary Data - Norsok N-004

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).

    Page 1983 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: API Punch Check 2 - Nominal Load Method - API RP2A-LRFD 97

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Page 1984 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: JointClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The buckling resistance moment.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: Ratio1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-LRFD 97 equation E.3-2.

    Field: Ratio2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-LRFD 97 equation E.3-3 for in-plane bending.

    Field: Ratio3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-LRFD 97 equation E.3-3 for out-of-plane
    bending.

    Page 1985 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ratio4
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-LRFD 97 equation E.3-4.

    Field: Ratio5
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-LRFD 97 equation E.3-7.

    Field: RatioGov
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.

    Field: ChordP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    factored axial force in the chord.

    Field: ChordInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored in-plane moment in the chord. In-plane means in the plane of the chord and
    brace.

    Page 1986 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ChordOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored out-of-plane moment in the chord. Out-of-plane means out of the plane of the
    chord and brace.

    Field: BraceP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    factored axial force in the brace.

    Field: BraceInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored in-plane moment in the brace. In-plane means in the plane of the chord and
    brace.

    Field: BraceOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored out-of-plane moment in the brace. Out-of-plane means out of the plane of the
    chord and brace.

    Field: QuAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for axial load used in evaluating the punching load.

    Field: QuInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Page 1987 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: QuOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Field: QfAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for axial load used in evaluating the punching load.

    Field: QfInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QfOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Field: Puj
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial force capacity for the brace.

    Field: MujIn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The in-plane bending moment capacity for the brace. In-plane means in the plane of the
    chord and brace.

    Page 1988 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MujOut
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The out-of-plane bending moment moment capacity for the brace. Out-of-plane means
    out of the plane of the chord and brace.

    Field: PhiJAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi subscript J for axial load in the brace.

    Field: PhiJInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi subscript J for in-plane bending in the brace.

    Field: PhiJOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi subscript J for out-of-plane bending in the brace.

    Field: Fyc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The smaller of the yield strength of the chord member or 2/3 of the tensile strength of the
    chord member.

    Field: BraceAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured in degrees from the Chord-type element to the Brace-type element.

    Page 1989 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Gap
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The gap distance associated with the brace. This item only applies when the joint
    classification is K Gap.

    Field: ChordTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the chord member.

    Field: BraceTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the brace member.

    Field: ChordDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the chord member.

    Field: BraceDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the brace member.

    Field: Tau
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The thickness of the brace member divided by the thickness of the chord member.
    Tau = BraceTh / ChordTh.

    Page 1990 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Beta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the brace member divided by the diameter of the chord member.
    Beta = BraceDiam / ChordDiam.

    Field: Gamma
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the chord member divided by two times the thickness of the chord
    member.
    Gamma = ChordDiam / (2 * ChordTh).

    Field: QBeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Q subscript Beta factor.

    Field: Qg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qg factor.

    Field: PPerp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The factored axial load component perpendicular to the chord.

    Field: WeldThick
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The lesser of the weld throat thickness or the thickness t of the thinner brace.

    Page 1991 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: L1OverL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The perimeter of the portion of the brace that contacts the chord (L1) divided by the
    perimeter of the portion of the brace that would contact the chord if no overlap existed.

    Field: L2
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The projected chord length (one side) of the overlapping weld, measured perpendicular to
    the chord, in an overlapping joint.

    Field: PPerpCap
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load component capacity perpendicular to the chord.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: API Punch Check 2 - Punching Shear Method - API RP2A-WSD2000

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Page 1992 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: JointClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The buckling resistance moment.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: OneThirdInc
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a one third stress increase is applied. Otherwise it is No.

    Field: Ratio1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-WSD2000 equation 4.3.1-3a.

    Page 1993 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ratio2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-WSD2000 equation 4.3.1-3b.

    Field: Ratio3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-WSD2000 equation 4.3.2-1.

    Field: RatioGov
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.

    Field: ChordP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    axial force in the chord.

    Field: ChordInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    in-plane moment in the chord. In-plane means in the plane of the chord and brace.

    Field: ChordOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    out-of-plane moment in the chord. Out-of-plane means out of the plane of the chord and
    brace.
    Page 1994 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BraceP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    axial force in the brace.

    Field: BraceInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    in-plane moment in the brace. In-plane means in the plane of the chord and brace.

    Field: BraceOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    out-of-plane moment in the brace. Out-of-plane means out of the plane of the chord and
    brace.

    Field: QqAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qq factor for axial load used in evaluating the punching load.

    Field: QqInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qq factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QqOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qq factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Page 1995 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: QfAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for axial load used in evaluating the punching load.

    Field: QfInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QfOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Field: VpAxial
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The applied stress in the brace due to axial loads.

    Field: VpInM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The applied stress in the brace due to in-plane bending loads. In-plane means in the plane
    of the chord and brace.

    Field: VpOutM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The applied stress in the brace due to out-of-plane bending loads. Out-of-plane means out
    of the plane of the chord and brace.

    Page 1996 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VpaAxial
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The allowable stress in the brace due to axial loads.

    Field: VpaInM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The allowable stress in the brace due to in-plane bending loads. In-plane means in the
    plane of the chord and brace.

    Field: VpaOutM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The allowable stress in the brace due to out-of-plane bending loads. Out-of-plane means
    out of the plane of the chord and brace.

    Field: Fyc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The smaller of the yield strength of the chord member or 2/3 of the tensile strength of the
    chord member.

    Field: BraceAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured in degrees from the Chord-type element to the Brace-type element.

    Field: Gap
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The gap distance associated with the brace. This item only applies when the joint
    classification is K Gap.

    Page 1997 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ChordTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the chord member.

    Field: BraceTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the brace member.

    Field: ChordDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the chord member.

    Field: BraceDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the brace member.

    Field: Tau
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The thickness of the brace member divided by the thickness of the chord member.
    Tau = BraceTh / ChordTh.

    Field: Beta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the brace member divided by the diameter of the chord member.
    Beta = BraceDiam / ChordDiam.

    Page 1998 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Gamma
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the chord member divided by two times the thickness of the chord
    member.
    Gamma = ChordDiam / (2 * ChordTh).

    Field: QBeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Q subscript Beta factor.

    Field: Qg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qg factor.

    Field: PPerp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load component perpendicular to the chord.

    Field: WeldThick
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The lesser of the weld throat thickness or the thickness t of the thinner brace.

    Field: L
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The perimeter of the portion of the brace that would contact the chord if no overlap
    existed.

    Page 1999 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: L1
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The circumference for that portion of the brace which contacts the chord.

    Field: L2
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The projected chord length (one side) of the overlapping weld, measured perpendicular to
    the chord, in an overlapping joint.

    Field: PPerpAllow
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The allowable axial load component perpendicular to the chord.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: API Punch Check 2 - Nominal Load Method - API RP2A-WSD2000

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Page 2000 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: JointClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The buckling resistance moment.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: OneThirdInc
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a one third stress increase is applied. Otherwise it is No.

    Field: Ratio1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-WSD2000 equation 4.3.1-5a.

    Page 2001 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ratio2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-WSD2000 equation 4.3.1-5b.

    Field: Ratio3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-WSD2000 equation 4.3.2-2.

    Field: RatioGov
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.

    Field: ChordP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    axial force in the chord.

    Field: ChordInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    in-plane moment in the chord. In-plane means in the plane of the chord and brace.

    Field: ChordOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    out-of-plane moment in the chord. Out-of-plane means out of the plane of the chord and
    brace.
    Page 2002 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BraceP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    axial force in the brace.

    Field: BraceInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    in-plane moment in the brace. In-plane means in the plane of the chord and brace.

    Field: BraceOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    out-of-plane moment in the brace. Out-of-plane means out of the plane of the chord and
    brace.

    Field: QuAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for axial load used in evaluating the punching load.

    Field: QuInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QuOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Page 2003 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: QfAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for axial load used in evaluating the punching load.

    Field: QfInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QfOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Field: Pa
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The allowable axial force in the brace.

    Field: MaIn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The allowable in-plane bending moment in the brace. In-plane means in the plane of the
    chord and brace.

    Field: MaOut
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The allowable out-of-plane bending moment in the brace. Out-of-plane means out of the
    plane of the chord and brace.

    Page 2004 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fyc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The smaller of the yield strength of the chord member or 2/3 of the tensile strength of the
    chord member.

    Field: BraceAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured in degrees from the Chord-type element to the Brace-type element.

    Field: Gap
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The gap distance associated with the brace. This item only applies when the joint
    classification is K Gap.

    Field: ChordTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the chord member.

    Field: BraceTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the brace member.

    Field: ChordDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the chord member.

    Page 2005 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BraceDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the brace member.

    Field: Tau
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The thickness of the brace member divided by the thickness of the chord member.
    Tau = BraceTh / ChordTh.

    Field: Beta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the brace member divided by the diameter of the chord member.
    Beta = BraceDiam / ChordDiam.

    Field: Gamma
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the chord member divided by two times the thickness of the chord
    member.
    Gamma = ChordDiam / (2 * ChordTh).

    Field: QBeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Q subscript Beta factor.

    Field: Qg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qg factor.

    Page 2006 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PPerp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load component perpendicular to the chord.

    Field: WeldThick
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The lesser of the weld throat thickness or the thickness t of the thinner brace.

    Field: L1OverL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The perimeter of the portion of the brace that contacts the chord (L1) divided by the
    perimeter of the portion of the brace that would contact the chord if no overlap existed.

    Field: L2
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The projected chord length (one side) of the overlapping weld, measured perpendicular to
    the chord, in an overlapping joint.

    Field: PPerpAllow
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The allowable axial load component perpendicular to the chord.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Page 2007 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: NS Punch Check 2 - Norsok N-004

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: JointClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The buckling resistance moment.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.
    Page 2008 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ratio1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using Norsok N-004 equation 6.52.

    Field: Ratio2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using Norsok N-004 equation 6.53 for in-plane bending.

    Field: Ratio3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using Norsok N-004 equation 6.53 for out-of-plane bending.

    Field: Ratio4
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using Norsok N-004 equation 6.57.

    Field: Ratio5
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using Norsok N-004 section 6.4.4.

    Field: RatioGov
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.

    Page 2009 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ChordP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    factored axial force in the chord.

    Field: ChordInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored in-plane moment in the chord. In-plane means in the plane of the chord and
    brace.

    Field: ChordOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored out-of-plane moment in the chord. Out-of-plane means out of the plane of the
    chord and brace.

    Field: BraceP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    factored axial force in the brace.

    Field: BraceInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored in-plane moment in the brace. In-plane means in the plane of the chord and
    brace.

    Field: BraceOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored out-of-plane moment in the brace. Out-of-plane means out of the plane of the
    chord and brace.

    Page 2010 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: QuAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for axial load used in evaluating the punching load.

    Field: QuInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QuOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Field: QfAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for axial load used in evaluating the punching load.

    Field: QfInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QfOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Page 2011 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NRd
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial force capacity for the brace.

    Field: My,Rd
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The in-plane bending moment capacity for the brace. In-plane means in the plane of the
    chord and brace.

    Field: Mz,Rd
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The out-of-plane bending moment moment capacity for the brace. Out-of-plane means
    out of the plane of the chord and brace.

    Field: fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The smaller of the yield strength of the chord member or 2/3 of the tensile strength of the
    chord member.

    Field: BraceAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured in degrees from the Chord-type element to the Brace-type element.

    Field: Gap
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The gap distance associated with the brace. This item only applies when the joint
    classification is K Gap.

    Page 2012 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ChordTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the chord member.

    Field: BraceTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the brace member.

    Field: ChordDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the chord member.

    Field: BraceDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the brace member.

    Field: Tau
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The thickness of the brace member divided by the thickness of the chord member.
    Tau = BraceTh / ChordTh.

    Field: Beta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the brace member divided by the diameter of the chord member.
    Beta = BraceDiam / ChordDiam.

    Page 2013 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Gamma
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the chord member divided by two times the thickness of the chord
    member.
    Gamma = ChordDiam / (2 * ChordTh).

    Field: QBeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Q subscript Beta factor.

    Field: Qg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qg factor.

    Field: PPerp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The factored axial load component perpendicular to the chord.

    Field: WeldThick
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The lesser of the weld throat thickness or the thickness t of the thinner brace.

    Field: L1OverL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The perimeter of the portion of the brace that contacts the chord (L1) divided by the
    perimeter of the portion of the brace that would contact the chord if no overlap existed.

    Page 2014 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: L2
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The projected chord length (one side) of the overlapping weld, measured perpendicular to
    the chord, in an overlapping joint.

    Field: PPerpCap
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load component capacity perpendicular to the chord.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: API Punch Details 1 - Summary Data - API RP2A-LRFD 97

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Page 2015 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Page 2016 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: API Punch Details 1 - Summary Data - API RP2A-WSD2000

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.
    Page 2017 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: NS Punch Details 1 - Summary Data - Norsok N-004

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).

    Page 2018 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: API Punch Details 2 - Nominal Load Method - API RP2A-LRFD 97

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Page 2019 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: JointClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The buckling resistance moment.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: Ratio1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-LRFD 97 equation E.3-2.

    Field: Ratio2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-LRFD 97 equation E.3-3 for in-plane bending.

    Field: Ratio3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-LRFD 97 equation E.3-3 for out-of-plane
    bending.

    Page 2020 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ratio4
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-LRFD 97 equation E.3-4.

    Field: Ratio5
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-LRFD 97 equation E.3-7.

    Field: RatioGov
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.

    Field: ChordP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    factored axial force in the chord.

    Field: ChordInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored in-plane moment in the chord. In-plane means in the plane of the chord and
    brace.

    Page 2021 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ChordOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored out-of-plane moment in the chord. Out-of-plane means out of the plane of the
    chord and brace.

    Field: BraceP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    factored axial force in the brace.

    Field: BraceInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored in-plane moment in the brace. In-plane means in the plane of the chord and
    brace.

    Field: BraceOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored out-of-plane moment in the brace. Out-of-plane means out of the plane of the
    chord and brace.

    Field: QuAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for axial load used in evaluating the punching load.

    Field: QuInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Page 2022 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: QuOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Field: QfAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for axial load used in evaluating the punching load.

    Field: QfInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QfOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Field: Puj
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial force capacity for the brace.

    Field: MujIn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The in-plane bending moment capacity for the brace. In-plane means in the plane of the
    chord and brace.

    Page 2023 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MujOut
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The out-of-plane bending moment moment capacity for the brace. Out-of-plane means
    out of the plane of the chord and brace.

    Field: PhiJAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi subscript J for axial load in the brace.

    Field: PhiJInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi subscript J for in-plane bending in the brace.

    Field: PhiJOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The resistance factor Phi subscript J for out-of-plane bending in the brace.

    Field: Fyc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The smaller of the yield strength of the chord member or 2/3 of the tensile strength of the
    chord member.

    Field: BraceAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured in degrees from the Chord-type element to the Brace-type element.

    Page 2024 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Gap
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The gap distance associated with the brace. This item only applies when the joint
    classification is K Gap.

    Field: ChordTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the chord member.

    Field: BraceTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the brace member.

    Field: ChordDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the chord member.

    Field: BraceDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the brace member.

    Field: Tau
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The thickness of the brace member divided by the thickness of the chord member.
    Tau = BraceTh / ChordTh.

    Page 2025 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Beta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the brace member divided by the diameter of the chord member.
    Beta = BraceDiam / ChordDiam.

    Field: Gamma
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the chord member divided by two times the thickness of the chord
    member.
    Gamma = ChordDiam / (2 * ChordTh).

    Field: QBeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Q subscript Beta factor.

    Field: Qg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qg factor.

    Field: PPerp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The factored axial load component perpendicular to the chord.

    Field: WeldThick
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The lesser of the weld throat thickness or the thickness t of the thinner brace.

    Page 2026 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: L1OverL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The perimeter of the portion of the brace that contacts the chord (L1) divided by the
    perimeter of the portion of the brace that would contact the chord if no overlap existed.

    Field: L2
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The projected chord length (one side) of the overlapping weld, measured perpendicular to
    the chord, in an overlapping joint.

    Field: PPerpCap
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load component capacity perpendicular to the chord.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: API Punch Details 2 - Punching Shear Method - API RP2A-WSD2000

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Page 2027 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: JointClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The buckling resistance moment.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: OneThirdInc
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a one third stress increase is applied. Otherwise it is No.

    Field: Ratio1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-WSD2000 equation 4.3.1-3a.

    Page 2028 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ratio2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-WSD2000 equation 4.3.1-3b.

    Field: Ratio3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-WSD2000 equation 4.3.2-1.

    Field: RatioGov
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.

    Field: ChordP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    axial force in the chord.

    Field: ChordInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    in-plane moment in the chord. In-plane means in the plane of the chord and brace.

    Field: ChordOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    out-of-plane moment in the chord. Out-of-plane means out of the plane of the chord and
    brace.
    Page 2029 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BraceP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    axial force in the brace.

    Field: BraceInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    in-plane moment in the brace. In-plane means in the plane of the chord and brace.

    Field: BraceOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    out-of-plane moment in the brace. Out-of-plane means out of the plane of the chord and
    brace.

    Field: QqAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qq factor for axial load used in evaluating the punching load.

    Field: QqInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qq factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QqOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qq factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Page 2030 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: QfAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for axial load used in evaluating the punching load.

    Field: QfInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QfOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Field: VpAxial
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The applied stress in the brace due to axial loads.

    Field: VpInM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The applied stress in the brace due to in-plane bending loads. In-plane means in the plane
    of the chord and brace.

    Field: VpOutM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The applied stress in the brace due to out-of-plane bending loads. Out-of-plane means out
    of the plane of the chord and brace.

    Page 2031 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VpaAxial
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The allowable stress in the brace due to axial loads.

    Field: VpaInM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The allowable stress in the brace due to in-plane bending loads. In-plane means in the
    plane of the chord and brace.

    Field: VpaOutM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    The allowable stress in the brace due to out-of-plane bending loads. Out-of-plane means
    out of the plane of the chord and brace.

    Field: Fyc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The smaller of the yield strength of the chord member or 2/3 of the tensile strength of the
    chord member.

    Field: BraceAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured in degrees from the Chord-type element to the Brace-type element.

    Field: Gap
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The gap distance associated with the brace. This item only applies when the joint
    classification is K Gap.

    Page 2032 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ChordTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the chord member.

    Field: BraceTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the brace member.

    Field: ChordDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the chord member.

    Field: BraceDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the brace member.

    Field: Tau
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The thickness of the brace member divided by the thickness of the chord member.
    Tau = BraceTh / ChordTh.

    Field: Beta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the brace member divided by the diameter of the chord member.
    Beta = BraceDiam / ChordDiam.

    Page 2033 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Gamma
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the chord member divided by two times the thickness of the chord
    member.
    Gamma = ChordDiam / (2 * ChordTh).

    Field: QBeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Q subscript Beta factor.

    Field: Qg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qg factor.

    Field: PPerp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load component perpendicular to the chord.

    Field: WeldThick
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The lesser of the weld throat thickness or the thickness t of the thinner brace.

    Field: L
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The perimeter of the portion of the brace that would contact the chord if no overlap
    existed.

    Page 2034 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: L1
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The circumference for that portion of the brace which contacts the chord.

    Field: L2
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The projected chord length (one side) of the overlapping weld, measured perpendicular to
    the chord, in an overlapping joint.

    Field: PPerpAllow
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The allowable axial load component perpendicular to the chord.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: API Punch Details 2 - Nominal Load Method - API RP2A-WSD2000

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Page 2035 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: JointClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The buckling resistance moment.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.

    Field: OneThirdInc
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    This item is Yes if a one third stress increase is applied. Otherwise it is No.

    Field: Ratio1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-WSD2000 equation 4.3.1-5a.

    Page 2036 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ratio2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-WSD2000 equation 4.3.1-5b.

    Field: Ratio3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using API RP2A-WSD2000 equation 4.3.2-2.

    Field: RatioGov
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.

    Field: ChordP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    axial force in the chord.

    Field: ChordInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    in-plane moment in the chord. In-plane means in the plane of the chord and brace.

    Field: ChordOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    out-of-plane moment in the chord. Out-of-plane means out of the plane of the chord and
    brace.
    Page 2037 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BraceP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    axial force in the brace.

    Field: BraceInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    in-plane moment in the brace. In-plane means in the plane of the chord and brace.

    Field: BraceOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    out-of-plane moment in the brace. Out-of-plane means out of the plane of the chord and
    brace.

    Field: QuAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for axial load used in evaluating the punching load.

    Field: QuInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QuOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Page 2038 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: QfAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for axial load used in evaluating the punching load.

    Field: QfInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QfOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Field: Pa
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The allowable axial force in the brace.

    Field: MaIn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The allowable in-plane bending moment in the brace. In-plane means in the plane of the
    chord and brace.

    Field: MaOut
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The allowable out-of-plane bending moment in the brace. Out-of-plane means out of the
    plane of the chord and brace.

    Page 2039 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fyc
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The smaller of the yield strength of the chord member or 2/3 of the tensile strength of the
    chord member.

    Field: BraceAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured in degrees from the Chord-type element to the Brace-type element.

    Field: Gap
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The gap distance associated with the brace. This item only applies when the joint
    classification is K Gap.

    Field: ChordTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the chord member.

    Field: BraceTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the brace member.

    Field: ChordDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the chord member.

    Page 2040 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BraceDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the brace member.

    Field: Tau
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The thickness of the brace member divided by the thickness of the chord member.
    Tau = BraceTh / ChordTh.

    Field: Beta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the brace member divided by the diameter of the chord member.
    Beta = BraceDiam / ChordDiam.

    Field: Gamma
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the chord member divided by two times the thickness of the chord
    member.
    Gamma = ChordDiam / (2 * ChordTh).

    Field: QBeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Q subscript Beta factor.

    Field: Qg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qg factor.

    Page 2041 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PPerp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load component perpendicular to the chord.

    Field: WeldThick
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The lesser of the weld throat thickness or the thickness t of the thinner brace.

    Field: L1OverL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The perimeter of the portion of the brace that contacts the chord (L1) divided by the
    perimeter of the portion of the brace that would contact the chord if no overlap existed.

    Field: L2
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The projected chord length (one side) of the overlapping weld, measured perpendicular to
    the chord, in an overlapping joint.

    Field: PPerpAllow
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The allowable axial load component perpendicular to the chord.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Page 2042 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: NS Punch Details 2 - Norsok N-004

    Field: Joint
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Joint object.

    Field: Chord
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a chord.

    Field: Brace
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a line object considered to be a brace.

    Field: JointClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The buckling resistance moment.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported. It is
    either the name of a specified design load combination, or the name of a specified design
    load combination followed by (SP).
    A design load combination name followed by (SP) indicates that the design loads were
    obtained by applying special, code-specific, seismic multipliers to part of the specified
    design load combination.
    Page 2043 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ratio1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using Norsok N-004 equation 6.52.

    Field: Ratio2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using Norsok N-004 equation 6.53 for in-plane bending.

    Field: Ratio3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using Norsok N-004 equation 6.53 for out-of-plane bending.

    Field: Ratio4
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using Norsok N-004 equation 6.57.

    Field: Ratio5
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio obtained using Norsok N-004 section 6.4.4.

    Field: RatioGov
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The governing stress ratio for the specified chord and brace.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The code equation used to calculate the governing stress ratio.

    Page 2044 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ChordP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    factored axial force in the chord.

    Field: ChordInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored in-plane moment in the chord. In-plane means in the plane of the chord and
    brace.

    Field: ChordOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored out-of-plane moment in the chord. Out-of-plane means out of the plane of the
    chord and brace.

    Field: BraceP
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    factored axial force in the brace.

    Field: BraceInM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored in-plane moment in the brace. In-plane means in the plane of the chord and
    brace.

    Field: BraceOutM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    factored out-of-plane moment in the brace. Out-of-plane means out of the plane of the
    chord and brace.

    Page 2045 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: QuAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for axial load used in evaluating the punching load.

    Field: QuInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QuOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qu factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Field: QfAxial
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for axial load used in evaluating the punching load.

    Field: QfInM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for in-plane moment used in evaluating the punching load. In-plane means
    in the plane of the chord and brace.

    Field: QfOutM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qf factor for out-of-plane moment used in evaluating the punching load. Out-ofplane means out of the plane of the chord and brace.

    Page 2046 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: NRd
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial force capacity for the brace.

    Field: My,Rd
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The in-plane bending moment capacity for the brace. In-plane means in the plane of the
    chord and brace.

    Field: Mz,Rd
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The out-of-plane bending moment moment capacity for the brace. Out-of-plane means
    out of the plane of the chord and brace.

    Field: fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The smaller of the yield strength of the chord member or 2/3 of the tensile strength of the
    chord member.

    Field: BraceAngle
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured in degrees from the Chord-type element to the Brace-type element.

    Field: Gap
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The gap distance associated with the brace. This item only applies when the joint
    classification is K Gap.

    Page 2047 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ChordTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the chord member.

    Field: BraceTh
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The thickness of the brace member.

    Field: ChordDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the chord member.

    Field: BraceDiam
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The diameter of the brace member.

    Field: Tau
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The thickness of the brace member divided by the thickness of the chord member.
    Tau = BraceTh / ChordTh.

    Field: Beta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the brace member divided by the diameter of the chord member.
    Beta = BraceDiam / ChordDiam.

    Page 2048 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Gamma
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The diameter of the chord member divided by two times the thickness of the chord
    member.
    Gamma = ChordDiam / (2 * ChordTh).

    Field: QBeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Q subscript Beta factor.

    Field: Qg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The Qg factor.

    Field: PPerp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The factored axial load component perpendicular to the chord.

    Field: WeldThick
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The lesser of the weld throat thickness or the thickness t of the thinner brace.

    Field: L1OverL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The perimeter of the portion of the brace that contacts the chord (L1) divided by the
    perimeter of the portion of the brace that would contact the chord if no overlap existed.

    Page 2049 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: L2
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The projected chord length (one side) of the overlapping weld, measured perpendicular to
    the chord, in an overlapping joint.

    Field: PPerpCap
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load component capacity perpendicular to the chord.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Bridge Seismic Design 01 - Bent D-C

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge seismic design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2050 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SDCategory
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Bridge seismic design category.

    Field: SpanName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the span that the bent belongs to.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the bent.

    Field: Direction
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The Direction is either transverse or longitudinal direction of the bent.

    Field: GenDispl
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a Generalized Displacement.

    Field: Demand
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    Displacement demand. For SDC = B and C, the demand is obtained from the response
    spectrum analysis results of this bridge object; for SDC = D, the demand is obtained from
    the response spectrum analysis results of each bent.

    Page 2051 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Capacity
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    Displacement capacity. For SDC = B, capacity = 0.12 Ho (-1.27 ln(x) - 0.32) >= 0.12 Ho;
    for SDC = C, capacity = 0.12 Ho (-2.32 ln(x) - 1.22) >= 0.12 Ho, in which x = factor *
    Bo / Ho, Ho : column height measure from top of footng to top of column, Bo : Column
    section diameter or width measured parallel to the direction of the displacement under
    consideration, factor represents column end restraint condition (1.0 for fixed-free ends and
    2.0 for fixed-fixed ends, interpolation for partial restraint is permitted.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The ratio of Demand and capacity.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Design/analysis status. Finished means the analysis is completed; Not Finished means the
    analysis is not completed due to some reasons but some analysis results are saved, the
    DCRatio is calculated based on the available results; Could Not Start means the analysis
    cannot be executed.
    Table: Bridge Seismic Design 02 - Bent Column Force Demand

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge seismic design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2052 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SpanName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the span that the bent belongs to.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the bent column.

    Field: Column
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The column id in the bridge bent.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The location of the column. Either TOP or BOTTOM.

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force in the bridge column.

    Field: V2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Vertical shear in the bridge column.

    Field: V3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Horizontal shear in the bridge column.

    Page 2053 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Torsion in the bridge column.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment about the vertical axis of the bridge column.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment along the bridge column.
    Table: Bridge Seismic Design 03 - Bent Column Idealized Moment Capacity

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge seismic design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the span that the bent belongs to.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the bent column.
    Page 2054 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Column
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The column id in the bridge bent.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The location of the column. Either TOP or BOTTOM.

    Field: GenHinge
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a generated Hinge at the column location.

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force in the bridge column due to the gravity load for calculating idealized moment
    capacity of the column.

    Field: Mp2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Idealized moment capacity about the bridge column axis 2.

    Field: Mp3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Idealized moment capacity about the bridge column axis 3.
    Table: Bridge Seismic Design 04 - Bent Column Cracked Properties

    Page 2055 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge seismic design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the span that the bent belongs to.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Column
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The column id in the bridge bent.

    Field: FModifier
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of named property set applied to the column.

    Field: I22Mod
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The factor for the entire column section property I22.

    Page 2056 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: I33Mod
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The factor for the entire column section property I33.

    Field: I22Top
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The section property I22 at the top of the column.

    Field: I33Top
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The section property I33 at the top of the column.

    Field: I22Bot
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The section property I22 at the bottom of the column.

    Field: I33Bot
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The section property I33 at the bottom of the column.

    Field: Ic22PosTop
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The cracked section property Ic22 under positive moment at the top of the column.

    Field: Ic22NegTop
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The cracked section property Ic22 under negative moment at the top of the column.

    Page 2057 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ic33PosTop
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The cracked section property Ic33 under positive moment at the top of the column.

    Field: Ic33NegTop
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The cracked section property Ic33 under negative moment at the top of the column.

    Field: Ic22PosBot
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The cracked section property Ic22 under positive moment at the bottom of the column.

    Field: Ic22NegBot
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The cracked section property Ic22 under negative moment at the bottom of the column.

    Field: Ic33PosBot
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The cracked section property Ic33 under positive moment at the bottom of the column.

    Field: Ic33NegBot
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The cracked section property Ic33 under negative moment at the bottom of the column.
    Table: Bridge Seismic Design 05 - Support Bearing Demand - Forces

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge seismic design request.
    Page 2058 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the span that the bent belongs to.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the bent.

    Field: Type
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The type that the bearing is used for. It can be Abutment, Bent or Hinge.

    Field: Bearing
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The bearing number counted from the left end of the bent cap beam/in-span
    hinge/abutment to the center of the considered bearing.

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force in the bridge support bearing.

    Field: V2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Horizontal shear in the bridge support bearing in the direction normal to the layout line.
    Page 2059 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Horizontal shear in the bridge support bearing in the direction along the layout line.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Torsion in the bridge support bearing.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment about the vertical axis of the bridge support bearing.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment along the bridge support bearing.
    Table: Bridge Seismic Design 06 - Support Bearing Demand - Deformations

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge seismic design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the span that the bent belongs to.
    Page 2060 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the bent.

    Field: Type
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The support type.

    Field: Bearing
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The Bearing index counted from the left to the right of the bridge section.

    Field: U1
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    This item is the deformation specified for the U1 degree of freedom.

    Field: U2
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    This item is the deformation specified for the U2 degree of freedom.

    Field: U3
    Field is Imported: No
    Format: Translational Displ (Displacements section of form)
    Units: Length
    This item is the deformation specified for the U3 degree of freedom.

    Field: R1
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    This item is the deformation specified for the R1 degree of freedom.

    Page 2061 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: R2
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    This item is the deformation specified for the R2 degree of freedom.

    Field: R3
    Field is Imported: No
    Format: Rotational Displ (Displacements section of form)
    Units: Radians
    This item is the deformation specified for the R3 degree of freedom.
    Table: Bridge Seismic Design 07 - Support Length Demand - Unscaled

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge seismic design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: SpanName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of the span that the bent belongs to.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the bent.

    Field: Type
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The support type.
    Page 2062 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Bearing
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The Bearing index counted from the left to the right of the bridge section.

    Field: SuppLength
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The unscaled support length measured normal to the support.
    Table: Bridge Super Design - Design Result Status

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    A number that represents the design status.
    Page 2063 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Message
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Message corresponding to the Status number.
    Table: Bridge Super Design AASHTOSTD02 01 - CBoxStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for the bridge section.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.
    Page 2064 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.
    Page 2065 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design AASHTOLRFD07 01 - CBoxStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2066 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for the bridge section.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.
    Page 2067 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design AASHTOLRFD07 02 - CBoxShear-SectProp
    Page 2068 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: FcConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c.

    Field: SqFcConcDes
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Square root of f'c with limits per 5.8.6.1.

    Field: SqFcConcUni
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Square root of f'c units, ksi or MPa.

    Page 2069 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.

    Field: PhiFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: LtWtFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Lambda - lightweight concrete strength reduction factor.

    Field: WdthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of shear flow path.

    Field: ATorsCir
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area inside torsion circuit.

    Field: LTorsCir
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Perimeter of torsion circuit.
    Table: Bridge Super Design AASHTOLRFD07 03 - CBoxShear-SectResult
    Page 2070 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Page 2071 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo control the shear demand over capacity ratio.

    Field: CtrlAsV
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo control the extra required transverse rebar.

    Field: CtrlAsTLong
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudial torsional rebar (AsTLong).

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand P for controlling D/C.

    Field: V2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand V2 for controlling D/C.

    Field: V3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand V3 for controlling D/C.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand T for controlling D/C.

    Page 2072 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand M2 for controlling D/C.

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand Ms for controlling D/C.

    Field: V2WResal
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand V2 with resal for controlling D/C.

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth.

    Field: StressTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Extreme Tensile Fiber Stress.

    Field: kFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    K factor (eq. 5.8.6.3).

    Field: TCrackRes
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Tcr (eq. 5.8.6.3-2), torsional caracking resistance.

    Page 2073 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TorsEffects
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Torsion effects flag.

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance (eq. 5.8.6.5-4).

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Reinforcement shear resistance (eq. 5.8.6.5-5).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance (eq.5.8.6.5-1 and 5.8.6.5-2).

    Field: AreaConcV
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Concrete shear area.

    Field: AsVProv
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Provided average area of transverse shear reinforcement per unit length within distance
    0.5*dv measured downstation from section cut and upstation from section cut.

    Field: AsVMinPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1.
    Page 2074 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AsVReq
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse reinforcement per unit length to carry shear.

    Field: AsTReq
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse reinforcement per unit length to carry torsion.

    Field: AsLProv
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of provided longitudinal torsional rebar in entire section.

    Field: ConcRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and maximum concrete shear capacity per eq. 5.8.6.5-2.

    Field: ConcRatioT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and maximum concrete shear and torsion capacity per eq. 5.8.6.5-5.

    Field: DCRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear demand and capacity. Capacity is based on provided transverse rebar.

    Field: DCRatioT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of torsion demand and capacity. Capacity is based on provided transverse
    reinforcement that is not utilized for shear.
    Page 2075 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ResultsFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web pass flag. It can be (1)Section passes, controlled by shear; (2)Concrete Web Area not
    sufficient; (3)Minimum Transverse Rebar not provided; (4)Transverse Rebar not sufficient
    to cover Demand or (5)Longitudinal Rebar not sufficient to cover Demand.

    Field: AsVExtrPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of extra transverse rebar per unit length required in web to satisfy code minimumm
    reinforcement clause 5.8.2.5-2 and demands.

    Field: AsTLongExtr
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of extra longitudinal torsional rebar required in section.
    Table: Bridge Super Design AASHTOLRFD07 04 - CBoxShear-WebProp

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2076 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Web
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The web name.

    Field: WdthHor
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Gross web Width.

    Field: Inclination
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle from vertical.

    Field: DiamDucts
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Duct(s) diameter.

    Field: WdthHorEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective web width.

    Field: ThickEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective web thickness.

    Page 2077 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DistribFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Load distribution factor.
    Table: Bridge Super Design AASHTOLRFD07 05 - CBoxShear-WebResult

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Web
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The web name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.
    Page 2078 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo control the shear demand over capacity ratio.

    Field: CtrlAsV
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo control the extra required transverse rebar.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design shear.

    Field: Tu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design torsion.

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance (eq. 5.8.6.5-4).

    Page 2079 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Reinforcement shear resistance (eq. 5.8.6.5-5).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance (eq.5.8.6.5-1 and 5.8.6.5-2).

    Field: AsVProv
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Provided average area of transverse shear reinforcement per unit length within distance
    0.5*dv measured downstation from section cut and upstation from section cut.

    Field: AsVMinPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1.

    Field: AsVReq
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse reinforcement per unit length to carry shear.

    Field: AsTReq
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse reinforcement per unit length to carry torsion.

    Field: ConcRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and maximum concrete shear capacity per eq. 5.8.6.5-2.
    Page 2080 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ConcRatioT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and maximum concrete shear and torsion capacity per eq. 5.8.6.5-5.

    Field: DCRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear demand and capacity. Capacity is based on provided transverse rebar.

    Field: DCRatioT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of torsion demand and capacity. Capacity is based on provided transverse
    reinforcement that is not utilized for shear.

    Field: ResultsFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web pass flag. It can be (1)Web passes, controlled by shear; (2)Concrete Web Area not
    sufficient; (3)Minimum Transverse Rebar not provided; (4)Transverse Rebar not sufficient
    to cover Demand or (5)Web passes, controlled by torsion.

    Field: AsVExtrPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of extra transverse rebar per unit length required in web to satisfy code minimumm
    reinforcement clause 5.8.2.5-2 and demands.
    Table: Bridge Super Design AASHTOLRFD07 06 - CBoxFlexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2081 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment resistance for the bridge section.

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Maximum moment demand for the bridge section.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Page 2082 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment resistance for the bridge section.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Minimum moment demand for the bridge section.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Field: PhiFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment resistance factor.

    Field: AreaSect
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the bridge section at this station.

    Field: I33Sect
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The section property I33 of the bridge section at this station.

    Page 2083 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Page 2084 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: AreaSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the top slab for the bridge section at this station.

    Field: EqThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the top slab for the bridge section at this station.

    Field: WdthSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the top slab for the bridge section at this station.

    Field: NumWebs
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Number of webs in the bridge section at this station.

    Page 2085 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SumWebWdth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Sum of web widths.

    Field: AreaSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the bottom slab for the bridge section at this station.

    Field: EqThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the bottom slab for the bridge section at this station.

    Field: WdthSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the bottom slab for the bridge section at this station.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.
    Page 2086 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    kp - per 8.8.4.2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    kp - per 8.8.4.2 bottom.

    Page 2087 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FcConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 - average.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Page 2088 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Design AASHTOLRFD07 07 - CBoxPrinc

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2089 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Web
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder index counted from the left to the right of the bridge section.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this web.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Page 2090 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at this web.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at this web.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Page 2091 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design AASHTOLRFD07 08 - PCCompStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: GirderPart
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Slab or Beam.
    Page 2092 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this GirderPart.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.
    Page 2093 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design AASHTOLRFD07 09 - PCCompShear-Prop
    Page 2094 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Page 2095 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section Nu and Vp to obtain girder Nu and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: WebWidthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective girder web width per AASHTO section 5.8.2.9.

    Field: fcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of beam concrete.

    Field: EsRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of reinforcement.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.

    Page 2096 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: sxe
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Crack spacing parameter per 5.8.3.4.2-5.
    Table: Bridge Super Design AASHTOLRFD07 10 - PCCompShear-Result

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.
    Page 2097 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the D/C ratio.

    Field: CtrlAsV
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the extra required transverse rebar.

    Field: CtrlAsLBeam
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the extra required lonitudinal rebar in concrete beam.

    Field: CtrlAsLSlab
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the extra required lonitudinal rebar in composite slab.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear force.

    Page 2098 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Nu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored axial force (positive if tensile).

    Field: Mu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth from extreme compression fiber to the centroid of the tensile force in the
    tensile reinforcement.

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth.

    Field: AreaPTLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal prestressed tendons on the tension flexural side of girder.

    Field: ARebarLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal reinforcement on the tension flexural side of girder.

    Page 2099 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fpo
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    A parameter taken as modulus of elasticity of prestressing tendons multiplied by the
    locked-in difference in strain between the prestressing tendons and the surrounding
    concrete. Calculated as 0.7fpu per 5.8.3.4.2-4.

    Field: fps
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average stress in prestressing steel per 5.7.3.1.1-1.

    Field: Ept
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average modulus of elasticity of prestressing tendons on the tension flexural side of
    girder.

    Field: AreaConc
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of concrete on the flexural tension side of the member. (Figure 5.8.3.4.2-1).

    Field: Ec
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of beam concrete.

    Field: EpsilonS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strain in nonprestressed longitudinal tension reinforcement. per eq. 5.8.3.4.2-4.

    Page 2100 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BetaFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor indicating ability of diagonally cracked concrete to transmit tension and shear per
    5.8.3.4.2-2.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle of inclination of diagonal compressive stresses per 5.8.3.4.2-3.

    Field: AsVProvPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Provided area of transverse shear reinforcement per unit length.

    Field: AsVMinPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1.

    Field: ConcRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and maximum concrete shear capacity per eq. 5.8.6.5-2.

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance (eq. 5.8.3.3-3).

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Transverse reinforcement shear resistance (eq. 5.8.3.3-4).
    Page 2101 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of the effective prestressing force. If same
    sign as Vu then the component is resisting the applied shear.

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance per 5.8.3.3-1 excluding Vp contribution.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio (includes Vp contribution).

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Section pass flag. It can be (1)Section passes; (2)Concrete Web Area not sufficient;
    (3)Minimum Transverse Rebar not provided; (4)Transverse Rebar not sufficient to cover
    demand or (5)Longitudinal Rebar not sufficient to cover demand.

    Field: AsVExtrPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of extra transverse rebar per unit length required in web to satisfy code minimumm
    reinforcement clause 5.8.2.5-2 and demands.

    Field: AsLExtrSlab
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of extra longitudinal rebar required in slab to satisfy demand.

    Page 2102 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AsLExtrBeam
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of extra longitudinal rebar required in beam to satisfy demand.
    Table: Bridge Super Design AASHTOLRFD07 11 - PCCompFlexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment resistance for the girder.
    Page 2103 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Maximum moment demand for the girder.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment resistance for the girder.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Minimun moment demand for the girder.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Page 2104 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: PhiFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment resistance factor.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Page 2105 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Page 2106 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: ThBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam top flange.

    Field: WdthBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam top flange.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ThBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam bottom flange.

    Field: WdthBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam bottom flange.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Page 2107 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.
    Page 2108 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fcCompSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: fcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the beam.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlkFactPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 . For positive moment.

    Page 2109 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BlkFactNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 . For negative moment.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Page 2110 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Design AASHTOLRFD07 12 - CBox2Stress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2111 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this GirderPart.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Page 2112 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.
    Page 2113 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design AASHTOLRFD07 13 - CBox2Shear-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2114 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section Nu and Vp to obtain girder Nu and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: WebWidthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective girder web width per AASHTO section 5.8.2.9.

    Field: Ec
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of concrete.

    Field: fc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of concrete.

    Page 2115 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EsRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of reinforcement.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.

    Field: sxe
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Crack spacing parameter per 5.8.3.4.2-5.
    Table: Bridge Super Design AASHTOLRFD07 14 - CBox2Shear-Result

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2116 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the D/C ratio.

    Field: CtrlAsV
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the extra required transverse rebar.

    Page 2117 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlAsLBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the bottom slab.

    Field: CtrlAsLTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the top slab.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear force.

    Field: Nu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored axial force (positive if tensile).

    Field: Mu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth from extreme compression fiber to the centroid of the tensile force in the
    tensile reinforcement.

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth.
    Page 2118 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaPTLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal prestressed tendons on the tension flexural side of girder.

    Field: ARebarLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal reinforcement on the tension flexural side of girder.

    Field: Fpo
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    A parameter taken as modulus of elasticity of prestressing tendons multiplied by the
    locked-in difference in strain between the prestressing tendons and the surrounding
    concrete. Calculated as 0.7fpu per 5.8.3.4.2-4.

    Field: fps
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average stress in prestressing steel per 5.7.3.1.1-1.

    Field: Ept
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average modulus of elasticity of prestressing tendons on the tension flexural side of
    girder.

    Field: AreaConc
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of concrete on the flexural tension side of the member. (Figure 5.8.3.4.2-1).

    Page 2119 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EpsilonS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strain in nonprestressed longitudinal tension reinforcement. per eq. 5.8.3.4.2-4.

    Field: BetaFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor indicating ability of diagonally cracked concrete to transmit tension and shear per
    5.8.3.4.2-2.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle of inclination of diagonal compressive stresses per 5.8.3.4.2-3.

    Field: AsVProvPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Provided area of transverse shear reinforcement per unit length.

    Field: AsVMinPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1.

    Field: ConcRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and maximum concrete shear capacity per eq. 5.8.6.5-2.

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance (eq. 5.8.3.3-3).
    Page 2120 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Transverse reinforcement shear resistance (eq. 5.8.3.3-4).

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of the effective prestressing force. If same
    sign as Vu then the component is resisting the applied shear.

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance per 5.8.3.3-1 excluding Vp contribution.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio (includes Vp contribution).

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Section pass flag. It can be (1)Section passes; (2)Concrete Web Area not sufficient;
    (3)Minimum Transverse Rebar not provided; (4)Transverse Rebar not sufficient to cover
    demand or (5)Longitudinal Rebar not sufficient to cover demand.

    Field: AsVExtrPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of extra transverse rebar per unit length required in web to satisfy code minimumm
    reinforcement clause 5.8.2.5-2 and demands.

    Page 2121 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AsLExtrTop
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of extra longitudinal rebar required in top slab to satisfy demand.

    Field: AsLExtrBot
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of extra longitudinal rebar required in bottom slab to satisfy demand.
    Table: Bridge Super Design AASHTOLRFD07 15 - CBox2Flexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2122 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment resistance for the girder.

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Maximum moment demand for the girder.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment resistance for the girder.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Minimun moment demand for the girder.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Page 2123 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: PhiFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment resistance factor.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Page 2124 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Page 2125 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Field: ThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the bottom slab.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Page 2126 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.
    Page 2127 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fcConGirder
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the girder.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 - average.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Page 2128 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Page 2129 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Design AASHTOLRFD07 16 - SteelICompStrgth-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Page 2130 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.
    Page 2131 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longterm Modular Ratio.

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Page 2132 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Page 2133 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.
    Page 2134 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kcFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Bottom flange local buckling coefficient - A6.3.2-6.

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Page 2135 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the negative plastic moment.

    Field: LamwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of the web based on elastic negative moment - A6.2.2.

    Field: LampwDcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dc/tw for negative
    moment - A6.2.2.

    Field: LampwDcpWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dcp/tw for negative
    moment - A6.2.1.

    Field: LamrwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact web for negative moment - 6.10.1.10.2.

    Field: CmpctWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is web compact for negative moment?.

    Page 2136 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RpcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the bottom flange for negative moment. Reported only when
    Appendix A applied in the design.

    Field: RptWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the top flange for negative moment. Reported only when
    Appendix A applied in the design.

    Field: rt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment.6.10.8.2.3-9.

    Field: J
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    St. Venant torsional constant. Reported only when Appendix A applied in the design.

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for positive moment - 6.10.1.6.

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for negative moment - 6.10.1.6.

    Page 2137 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for positive moment - 6.10.1.10.1.

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for negative moment - 6.10.1.10.1.

    Field: CmpctGrdPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for positive moment?.

    Field: CmpctGrdNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for negative moment?.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.
    Page 2138 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Page 2139 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Field: PNADistLmt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limit on distance to plastic neutral axis for positive moment per 6.10.7.3-1.

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Page 2140 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for positive moment.

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section controlling yield moment capacity for negative moment.

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the bottom flange.

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the top flange.

    Field: Lp
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: Lr
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5 or
    A6.3.3-5.

    Page 2141 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.

    Field: BeamPBklShr
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not steel beam is proportioned to develop postbuckling shear resistance (eq.
    6.10.9.3.2-1).

    Field: IsCurved
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bridge curved?.

    Field: UsedAppA
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Has Appendix A been used to derive negative moment capacity?.
    Table: Bridge Super Design AASHTOLRFD07 17 - SteelICompStrgth-FlxPs

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2142 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Page 2143 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment for positive flexure. If negative, moment set to zero. Reported
    only if flexural resistance is expressed in terms of moment, otherwise set to zero.

    Field: fl
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored resistance moment for positive flexure. Reported only if flexural resistance is
    expressed in terms of moment, otherwise set to zero.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored axial force demand in girder. Reported only if applicable, otherwise set to zero.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment demand on noncomposite section used to evaluate fbu. Reported only
    for non-compact sections for which positive flexural resistance is expressed in terms of
    stress and Use Stage Analysis = No, otherwise set to zero.

    Page 2144 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment demand on long term composite section used to evaluate fbu. Reported
    only for non-compact sections for which positive flexural resistance is expressed in terms
    of stress and Use Stage Analysis = No, otherwise set to zero.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment demand on short term composite section used to evaluate fbu. Reported
    only for non-compact sections for which positive flexural resistance is expressed in terms
    of stress and Use Stage Analysis = No, otherwise set to zero.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to factored demand at the section cut calculated without
    the consideration of flange lateral bending. Reported only if applicable, otherwise set to
    zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to factored demand at the section cut calculated without
    the consideration of flange lateral bending. Reported only if applicable, otherwise set to
    zero.

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange for positive moment. Reported
    only if applicable, otherwise set to zero.

    Page 2145 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange for positive moment. Reported only if
    applicable, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design AASHTOLRFD07 18 - SteelICompStrgth-FlxNg

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2146 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment for negative flexure. If positive, moment set to zero. Reported
    only if flexural resistance is expressed in terms of moment, otherwise set to zero.
    Page 2147 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fl
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Field: MncFLB
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal flexural resistance moment for negative moment based on bottom flange local
    buckling. Reported only if applicable, otherwise set to zero.

    Field: MncLTB
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal flexural resistance moment for negative moment based on bottom flange lateral
    torsional buckling. Reported only if applicable, otherwise set to zero.

    Field: MrcNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Controlling factored flexural resistance moment for bottom flange for negative moment.
    Reported only if applicable, otherwise set to zero.

    Field: MrtNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored flexural resistance moment for top flange for negative moment. Reported only if
    applicable, otherwise set to zero.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored axial force demand in girder. Reported only if applicable, otherwise set to zero.

    Page 2148 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment demand on noncomposite section used to evaluate fbu. Reported only
    for non-compact sections for which negative flexural resistance is expressed in terms of
    stress and Use Stage Analysis = No, otherwise set to zero.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment demand on long term composite section used to evaluate fbu. Reported
    only for non-compact sections for which negative flexural resistance is expressed in terms
    of stress and Use Stage Analysis = No, otherwise set to zero.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment demand on short term composite section used to evaluate fbu. Reported
    only for non-compact sections for which negative flexural resistance is expressed in terms
    of stress and Use Stage Analysis = No, otherwise set to zero.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress due to factored demand at the section cut calculated
    without the consideration of flange lateral bending. Reported only if applicable, otherwise
    set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress due to factored demand at the section cut calculated without the
    consideration of flange lateral bending. Reported only if applicable, otherwise set to zero.

    Page 2149 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FncFLB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexural resistance stress for negative moment based on bottom flange local
    buckling. Reported only if applicable, otherwise set to zero.

    Field: FncLTB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexural resistance stress for negative moment based on bottom flange lateral
    torsional buckling. Reported only if applicable, otherwise set to zero.

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Controlling factored flexural resistance stress for bottom flange for negative moment.
    Reported only if applicable, otherwise set to zero.

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress for top flange for negative moment. Reported only if
    applicable, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - negative flexure.
    Table: Bridge Super Design AASHTOLRFD07 19 - SteelICompStrgth-Shear

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2150 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2151 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear (absolute value).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear buckling resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Plastic shear force.

    Page 2152 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear buckling resistance to shear yield strength.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coefficient.

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: d0req
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Suggested minimum transverse stiffener spacing to achieve D/C=1. Value set to d0 during
    optimization.

    Field: VrWithD0req
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance based on d0req transverse stiffner spacing. Value not
    recalculated during optimization.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - shear.
    Table: Bridge Super Design AASHTOLRFD07 20 - SteelICompServ-Prop

    Page 2153 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.
    Page 2154 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longterm Modular Ratio.

    Page 2155 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Page 2156 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Page 2157 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.

    Field: kcFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Bottom flange local buckling coefficient - A6.3.2-6.

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.
    Page 2158 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the negative plastic moment.

    Field: LamwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of the web based on elastic negative moment - A6.2.2.

    Page 2159 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LampwDcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dc/tw for negative
    moment - A6.2.2.

    Field: LampwDcpWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dcp/tw for negative
    moment - A6.2.1.

    Field: LamrwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact web for negative moment - 6.10.1.10.2.

    Field: CmpctWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is web compact for negative moment?.

    Field: RpcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the bottom flange for negative moment. Reported only when
    Appendix A applied in the design.

    Field: RptWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the top flange for negative moment. Reported only when
    Appendix A applied in the design.

    Page 2160 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: rt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment.6.10.8.2.3-9.

    Field: J
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    St. Venant torsional constant. Reported only when Appendix A applied in the design.

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for positive moment - 6.10.1.6.

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for negative moment - 6.10.1.6.

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for positive moment - 6.10.1.10.1.

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for negative moment - 6.10.1.10.1.

    Field: CmpctGrdPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for positive moment?.
    Page 2161 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmpctGrdNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for negative moment?.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Page 2162 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Page 2163 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PNADistLmt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limit on distance to plastic neutral axis for positive moment per 6.10.7.3-1.

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for positive moment.

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section controlling yield moment capacity for negative moment.

    Page 2164 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the bottom flange.

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the top flange.

    Field: Lp
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: Lr
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5 or
    A6.3.3-5.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.

    Field: BeamPBklShr
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not steel beam is proportioned to develop postbuckling shear resistance (eq.
    6.10.9.3.2-1).
    Table: Bridge Super Design AASHTOLRFD07 21 - SteelICompServ-FlxPs

    Page 2165 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Page 2166 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section.

    Page 2167 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ffTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress at the section cut calculated without the consideration of
    flange lateral bending.

    Field: ffBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress at the section cut calculated without the consideration of
    flange lateral bending.

    Field: fl
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber compression stress at the section cut.

    Field: FrTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of top compression flange for positive moment.

    Field: FrBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of bottom tension flange for positive moment.

    Page 2168 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD07 22 - SteelICompServ-FlxNg

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.
    Page 2169 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section.

    Page 2170 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section.

    Field: ffTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress at the section cut calculated without the consideration of flange
    lateral bending.

    Field: ffBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress at the section cut calculated without the consideration of
    flange lateral bending.

    Field: fl
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber tension stress at the section cut.

    Field: FrTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of top tension flange for negative moment.

    Page 2171 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of bottom compression flange for negative moment.

    Field: Dc
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in the elastic range.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Bend-buckling coefficient.

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal bend buckling resistance for webs.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD07 23 - SteelICompWebFatigue

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.
    Page 2172 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Page 2173 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for fatigue shear.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: DepthWeb
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Page 2174 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear buckling resistance to shear yield strength.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coefficient.

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Plastic shear force.

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear buckling resistance.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand force (absolute value).

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - shear.
    Table: Bridge Super Design AASHTOLRFD07 24 - SteelICompCstrStg-Prop
    Page 2175 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.
    Page 2176 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the slab.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Page 2177 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Field: fyrFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange stress at the onset of nominal yielding within the cross section, including
    residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of top flange - 6.10.8.2.2-3.

    Field: LampfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact top flange - 6.10.8.2.2-4.
    Page 2178 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LamrfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact top flange - 6.10.8.2.2-5.

    Field: CmpctFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is top flange compact for positive moment - 0=False, 1=True.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.
    Page 2179 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for positive moment - 6.10.1.6.

    Page 2180 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for negative moment - 6.10.1.6.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Bottom flange unbraced length as determined from the diaphragm location and type. Same
    value used also for top flange unbraced length when slab status = non-composite.
    Table: Bridge Super Design AASHTOLRFD07 25 - SteelICompCstrStg-FlxPs

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2181 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. It is either non-composite or composite).

    Page 2182 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to factored demand at the section cut calculated without
    the consideration of flange lateral bending. Reported only if applicable, otherwise set to
    zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to factored demand at the section cut calculated without
    the consideration of flange lateral bending. Reported only if applicable, otherwise set to
    zero.

    Field: flTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange lateral bending stress.

    Field: flBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber compression stress at the section cut.

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal bend buckling resistance for webs without longitudinal stiffeners.

    Page 2183 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Dc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Depth of web in compression in the elastic range.

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybridg factor for positive moment - 6.10.1.10.1.

    Field: rt
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for positive moment.- 6.10.8.2.39.

    Field: Lp
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4.

    Field: Lr
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of top flange residual stress effects 6.10.8.2.3-5.

    Field: FncFLB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for positive moment based on top flange local
    buckling. Reported only if applicable, otherwise set to zero.

    Page 2184 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FncLTB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for positive moment based on top flange lateral
    torsional buckling. Reported only if applicable, otherwise set to zero.

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange for positive moment. Reported
    only if applicable, otherwise set to zero.

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange for positive moment. Reported only if
    applicable, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design AASHTOLRFD07 26 - SteelICompCstrStg-FlxNg

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2185 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Page 2186 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. It is either non-composite or composite).

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress due to factored demand at the section cut calculated
    without the consideration of flange lateral bending. Reported only if applicable, otherwise
    set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress due to factored demand at the section cut calculated without the
    consideration of flange lateral bending. Reported only if applicable, otherwise set to zero.

    Field: flTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange lateral bending stress.

    Field: flBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Page 2187 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber tension stress at the section cut.

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal bend buckling resistance for webs without longitudinal stiffeners.

    Field: Dc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Depth of web in compression in the elastic range.

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybridg factor for negative moment - 6.10.1.10.1.

    Field: rt
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment.6.10.8.2.3-9.

    Field: Lp
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4.

    Page 2188 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lr
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5.

    Field: FncFLB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for negative moment based on bottom flange local
    buckling.

    Field: FncLTB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for negative moment based on bottom flange lateral
    torsional buckling.

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Controlling factored flexural resistance stress for bottom flange for negative moment.
    Reported only if applicable, otherwise set to zero.

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress for top flange for negative moment. Reported only if
    applicable, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - negative flexure.
    Table: Bridge Super Design AASHTOLRFD07 27 - SteelICompCstrStg-Shear

    Page 2189 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Page 2190 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The Output Label defined in the staged construction load case.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. It is either non-composite or composite).

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear (absolute value).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Page 2191 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear buckling resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Plastic shear force.

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear buckling resistance to shear yield strength.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coefficient.

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: d0req
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Suggested minimum transverse stiffener spacing to achieve D/C=1. Value set to d0 during
    optimization.

    Page 2192 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VrWithD0req
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance based on d0req transverse stiffner spacing. Value not
    recalculated during optimization.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - shear.
    Table: Bridge Super Design AASHTOLRFD07 28 - SteelICompCstrNStg-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2193 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the slab.
    Page 2194 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Page 2195 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fyrFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange stress at the onset of nominal yielding within the cross section, including
    residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of top flange - 6.10.8.2.2-3.

    Field: LampfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact top flange - 6.10.8.2.2-4.

    Field: LamrfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact top flange - 6.10.8.2.2-5.

    Field: CmpctFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is top flange compact for positive moment - 0=False, 1=True.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.
    Page 2196 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.
    Page 2197 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for positive moment - 6.10.1.6.

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for negative moment - 6.10.1.6.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.
    Table: Bridge Super Design AASHTOLRFD07 29 - SteelICompCstrNStg-FlxPs

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.
    Page 2198 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Page 2199 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. It is either non-composite or composite).

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to factored demand at the section cut calculated without
    the consideration of flange lateral bending. Reported only if applicable, otherwise set to
    zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to factored demand at the section cut calculated without
    the consideration of flange lateral bending. Reported only if applicable, otherwise set to
    zero.

    Field: flTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange lateral bending stress.

    Field: flBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Page 2200 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber compression stress at the section cut.

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal bend buckling resistance for webs without longitudinal stiffeners.

    Field: Dc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Depth of web in compression in the elastic range.

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybridg factor for positive moment - 6.10.1.10.1.

    Field: rt
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for positive moment.- 6.10.8.2.39.

    Field: Lp
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4.

    Page 2201 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lr
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of top flange residual stress effects 6.10.8.2.3-5.

    Field: FncFLB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for positive moment based on top flange local
    buckling. Reported only if applicable, otherwise set to zero.

    Field: FncLTB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for positive moment based on top flange lateral
    torsional buckling. Reported only if applicable, otherwise set to zero.

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange for positive moment. Reported
    only if applicable, otherwise set to zero.

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange for positive moment. Reported only if
    applicable, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design AASHTOLRFD07 30 - SteelICompCstrNStg-FlxNg

    Page 2202 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2203 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. It is either non-composite or composite).

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress due to factored demand at the section cut calculated
    without the consideration of flange lateral bending. Reported only if applicable, otherwise
    set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress due to factored demand at the section cut calculated without the
    consideration of flange lateral bending. Reported only if applicable, otherwise set to zero.

    Page 2204 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: flTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange lateral bending stress.

    Field: flBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber tension stress at the section cut.

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal bend buckling resistance for webs without longitudinal stiffeners.

    Field: Dc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Depth of web in compression in the elastic range.

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybridg factor for negative moment - 6.10.1.10.1.

    Field: rt
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment.6.10.8.2.3-9.
    Page 2205 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lp
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4.

    Field: Lr
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5.

    Field: FncFLB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for negative moment based on bottom flange local
    buckling.

    Field: FncLTB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for negative moment based on bottom flange lateral
    torsional buckling.

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Controlling factored flexural resistance stress for bottom flange for negative moment.
    Reported only if applicable, otherwise set to zero.

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress for top flange for negative moment. Reported only if
    applicable, otherwise set to zero.

    Page 2206 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - negative flexure.
    Table: Bridge Super Design AASHTOLRFD07 31 - SteelICompCstrNStg-Shear

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.
    Page 2207 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The Output Label defined in the staged construction load case.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. It is either non-composite or composite).

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear (absolute value).

    Page 2208 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear buckling resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Plastic shear force.

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear buckling resistance to shear yield strength.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coefficient.

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: d0req
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Suggested minimum transverse stiffener spacing to achieve D/C=1. Value set to d0 during
    optimization.
    Page 2209 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VrWithD0req
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance based on d0req transverse stiffner spacing. Value not
    recalculated during optimization.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - shear.
    Table: Bridge Super Design AASHTOLRFD12 01 - CBoxStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2210 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for the bridge section.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.
    Page 2211 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design AASHTOLRFD12 02 - CBoxShear-SectProp

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.
    Page 2212 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: FcConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c.

    Field: SqFcConcDes
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Square root of f'c with limits per 5.8.6.1.

    Field: SqFcConcUni
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Square root of f'c units, ksi or MPa.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Page 2213 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.

    Field: PhiFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance factor.

    Field: LtWtFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Lambda - lightweight concrete strength reduction factor.

    Field: WdthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of shear flow path.

    Field: ATorsCir
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area inside torsion circuit.

    Field: LTorsCir
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Perimeter of torsion circuit.
    Table: Bridge Super Design AASHTOLRFD12 03 - CBoxShear-SectResult

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.
    Page 2214 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo control the shear demand over capacity ratio.

    Page 2215 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlAsV
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo control the extra required transverse rebar.

    Field: CtrlAsTLong
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudial torsional rebar (AsTLong).

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand P for controlling D/C.

    Field: V2
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand V2 for controlling D/C.

    Field: V3
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand V3 for controlling D/C.

    Field: T
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand T for controlling D/C.

    Field: M2
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand M2 for controlling D/C.

    Page 2216 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M3
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand Ms for controlling D/C.

    Field: V2WResal
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand V2 with resal for controlling D/C.

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth.

    Field: StressTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Extreme Tensile Fiber Stress.

    Field: kFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    K factor (eq. 5.8.6.3).

    Field: TCrackRes
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Tcr (eq. 5.8.6.3-2), torsional caracking resistance.

    Field: TorsEffects
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Torsion effects flag.

    Page 2217 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance (eq. 5.8.6.5-4).

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Reinforcement shear resistance (eq. 5.8.6.5-5).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance (eq.5.8.6.5-1 and 5.8.6.5-2).

    Field: AreaConcV
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Concrete shear area.

    Field: AsVProv
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Provided average area of transverse shear reinforcement per unit length within distance
    0.5*dv measured downstation from section cut and upstation from section cut.

    Field: AsVMinPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1.

    Field: AsVReq
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse reinforcement per unit length to carry shear.
    Page 2218 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AsTReq
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse reinforcement per unit length to carry torsion.

    Field: AsLProv
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of provided longitudinal torsional rebar in entire section.

    Field: ConcRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and maximum concrete shear capacity per eq. 5.8.6.5-2.

    Field: ConcRatioT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and maximum concrete shear and torsion capacity per eq. 5.8.6.5-5.

    Field: DCRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear demand and capacity. Capacity is based on provided transverse rebar.

    Field: DCRatioT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of torsion demand and capacity. Capacity is based on provided transverse
    reinforcement that is not utilized for shear.

    Page 2219 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ResultsFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web pass flag. It can be (1)Section passes, controlled by shear; (2)Concrete Web Area not
    sufficient; (3)Minimum Transverse Rebar not provided; (4)Transverse Rebar not sufficient
    to cover Demand or (5)Longitudinal Rebar not sufficient to cover Demand.

    Field: AsVExtrPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of extra transverse rebar per unit length required in web to satisfy code minimumm
    reinforcement clause 5.8.2.5-2 and demands.

    Field: AsTLongExtr
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of extra longitudinal torsional rebar required in section.
    Table: Bridge Super Design AASHTOLRFD12 04 - CBoxShear-WebProp

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2220 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Web
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The web name.

    Field: WdthHor
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Gross web Width.

    Field: Inclination
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle from vertical.

    Field: DiamDucts
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Duct(s) diameter.

    Field: WdthHorEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective web width.

    Field: ThickEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective web thickness.

    Page 2221 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DistribFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Load distribution factor.
    Table: Bridge Super Design AASHTOLRFD12 05 - CBoxShear-WebResult

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Web
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The web name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.
    Page 2222 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo control the shear demand over capacity ratio.

    Field: CtrlAsV
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo control the extra required transverse rebar.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design shear.

    Field: Tu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design torsion.

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance (eq. 5.8.6.5-4).

    Page 2223 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Reinforcement shear resistance (eq. 5.8.6.5-5).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance (eq.5.8.6.5-1 and 5.8.6.5-2).

    Field: AsVProv
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Provided average area of transverse shear reinforcement per unit length within distance
    0.5*dv measured downstation from section cut and upstation from section cut.

    Field: AsVMinPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1.

    Field: AsVReq
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse reinforcement per unit length to carry shear.

    Field: AsTReq
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse reinforcement per unit length to carry torsion.

    Field: ConcRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and maximum concrete shear capacity per eq. 5.8.6.5-2.
    Page 2224 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ConcRatioT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and maximum concrete shear and torsion capacity per eq. 5.8.6.5-5.

    Field: DCRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear demand and capacity. Capacity is based on provided transverse rebar.

    Field: DCRatioT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of torsion demand and capacity. Capacity is based on provided transverse
    reinforcement that is not utilized for shear.

    Field: ResultsFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web pass flag. It can be (1)Web passes, controlled by shear; (2)Concrete Web Area not
    sufficient; (3)Minimum Transverse Rebar not provided; (4)Transverse Rebar not sufficient
    to cover Demand or (5)Web passes, controlled by torsion.

    Field: AsVExtrPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of extra transverse rebar per unit length required in web to satisfy code minimumm
    reinforcement clause 5.8.2.5-2 and demands.
    Table: Bridge Super Design AASHTOLRFD12 06 - CBoxFlexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2225 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment resistance for the bridge section.

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Maximum moment demand for the bridge section.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Page 2226 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment resistance for the bridge section.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Minimum moment demand for the bridge section.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Field: PhiFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment resistance factor.

    Field: AreaSect
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the bridge section at this station.

    Field: I33Sect
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The section property I33 of the bridge section at this station.

    Page 2227 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Page 2228 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: AreaSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the top slab for the bridge section at this station.

    Field: EqThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the top slab for the bridge section at this station.

    Field: WdthSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the top slab for the bridge section at this station.

    Field: NumWebs
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Number of webs in the bridge section at this station.

    Page 2229 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SumWebWdth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Sum of web widths.

    Field: AreaSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the bottom slab for the bridge section at this station.

    Field: EqThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the bottom slab for the bridge section at this station.

    Field: WdthSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the bottom slab for the bridge section at this station.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.
    Page 2230 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    kp - per 8.8.4.2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    kp - per 8.8.4.2 bottom.

    Page 2231 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FcConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 - average.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Page 2232 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Design AASHTOLRFD12 07 - CBoxPrinc

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2233 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Web
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder index counted from the left to the right of the bridge section.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this web.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Page 2234 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at this web.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at this web.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Page 2235 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design AASHTOLRFD12 08 - PCCompStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: GirderPart
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Slab or Beam.
    Page 2236 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this GirderPart.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.
    Page 2237 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design AASHTOLRFD12 09 - PCCompShear-Prop
    Page 2238 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Page 2239 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section Nu and Vp to obtain girder Nu and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: WebWidthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective girder web width per AASHTO section 5.8.2.9.

    Field: fcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of beam concrete.

    Field: EsRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of reinforcement.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.

    Page 2240 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: sxe
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Crack spacing parameter per 5.8.3.4.2-5.
    Table: Bridge Super Design AASHTOLRFD12 10 - PCCompShear-Result

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.
    Page 2241 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the D/C ratio.

    Field: CtrlAsV
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the extra required transverse rebar.

    Field: CtrlAsLBeam
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the extra required lonitudinal rebar in concrete beam.

    Field: CtrlAsLSlab
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the extra required lonitudinal rebar in composite slab.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear force.

    Page 2242 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Nu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored axial force (positive if tensile).

    Field: Mu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth from extreme compression fiber to the centroid of the tensile force in the
    tensile reinforcement.

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth.

    Field: AreaPTLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal prestressed tendons on the tension flexural side of girder.

    Field: ARebarLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal reinforcement on the tension flexural side of girder.

    Page 2243 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fpo
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    A parameter taken as modulus of elasticity of prestressing tendons multiplied by the
    locked-in difference in strain between the prestressing tendons and the surrounding
    concrete. Calculated as 0.7fpu per 5.8.3.4.2-4.

    Field: fps
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average stress in prestressing steel per 5.7.3.1.1-1.

    Field: Ept
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average modulus of elasticity of prestressing tendons on the tension flexural side of
    girder.

    Field: AreaConc
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of concrete on the flexural tension side of the member. (Figure 5.8.3.4.2-1).

    Field: Ec
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of beam concrete.

    Field: EpsilonS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strain in nonprestressed longitudinal tension reinforcement. per eq. 5.8.3.4.2-4.

    Page 2244 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BetaFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor indicating ability of diagonally cracked concrete to transmit tension and shear per
    5.8.3.4.2-2.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle of inclination of diagonal compressive stresses per 5.8.3.4.2-3.

    Field: AsVProvPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Provided area of transverse shear reinforcement per unit length.

    Field: AsVMinPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1.

    Field: ConcRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and maximum concrete shear capacity per eq. 5.8.6.5-2.

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance (eq. 5.8.3.3-3).

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Transverse reinforcement shear resistance (eq. 5.8.3.3-4).
    Page 2245 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of the effective prestressing force. If same
    sign as Vu then the component is resisting the applied shear.

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance per 5.8.3.3-1 excluding Vp contribution.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio (includes Vp contribution).

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Section pass flag. It can be (1)Section passes; (2)Concrete Web Area not sufficient;
    (3)Minimum Transverse Rebar not provided; (4)Transverse Rebar not sufficient to cover
    demand or (5)Longitudinal Rebar not sufficient to cover demand.

    Field: AsVExtrPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of extra transverse rebar per unit length required in web to satisfy code minimumm
    reinforcement clause 5.8.2.5-2 and demands.

    Field: AsLExtrSlab
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of extra longitudinal rebar required in slab to satisfy demand.

    Page 2246 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AsLExtrBeam
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of extra longitudinal rebar required in beam to satisfy demand.
    Table: Bridge Super Design AASHTOLRFD12 11 - PCCompFlexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment resistance for the girder.
    Page 2247 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Maximum moment demand for the girder.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment resistance for the girder.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Minimun moment demand for the girder.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Page 2248 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: PhiFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment resistance factor.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Page 2249 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Page 2250 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: ThBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam top flange.

    Field: WdthBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam top flange.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ThBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam bottom flange.

    Field: WdthBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam bottom flange.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Page 2251 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.
    Page 2252 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fcCompSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: fcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the beam.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlkFactPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 . For positive moment.

    Page 2253 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BlkFactNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 . For negative moment.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Page 2254 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Design AASHTOLRFD12 12 - CBox2Stress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2255 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this GirderPart.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Page 2256 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.
    Page 2257 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design AASHTOLRFD12 13 - CBox2Shear-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2258 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section Nu and Vp to obtain girder Nu and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: WebWidthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective girder web width per AASHTO section 5.8.2.9.

    Field: Ec
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of concrete.

    Field: fc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of concrete.

    Page 2259 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EsRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of reinforcement.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.

    Field: sxe
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Crack spacing parameter per 5.8.3.4.2-5.
    Table: Bridge Super Design AASHTOLRFD12 14 - CBox2Shear-Result

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2260 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the D/C ratio.

    Field: CtrlAsV
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the extra required transverse rebar.

    Page 2261 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlAsLBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the bottom slab.

    Field: CtrlAsLTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the top slab.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear force.

    Field: Nu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored axial force (positive if tensile).

    Field: Mu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth from extreme compression fiber to the centroid of the tensile force in the
    tensile reinforcement.

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth.
    Page 2262 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaPTLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal prestressed tendons on the tension flexural side of girder.

    Field: ARebarLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal reinforcement on the tension flexural side of girder.

    Field: Fpo
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    A parameter taken as modulus of elasticity of prestressing tendons multiplied by the
    locked-in difference in strain between the prestressing tendons and the surrounding
    concrete. Calculated as 0.7fpu per 5.8.3.4.2-4.

    Field: fps
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average stress in prestressing steel per 5.7.3.1.1-1.

    Field: Ept
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average modulus of elasticity of prestressing tendons on the tension flexural side of
    girder.

    Field: AreaConc
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of concrete on the flexural tension side of the member. (Figure 5.8.3.4.2-1).

    Page 2263 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EpsilonS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strain in nonprestressed longitudinal tension reinforcement. per eq. 5.8.3.4.2-4.

    Field: BetaFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor indicating ability of diagonally cracked concrete to transmit tension and shear per
    5.8.3.4.2-2.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle of inclination of diagonal compressive stresses per 5.8.3.4.2-3.

    Field: AsVProvPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Provided area of transverse shear reinforcement per unit length.

    Field: AsVMinPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1.

    Field: ConcRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and maximum concrete shear capacity per eq. 5.8.6.5-2.

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance (eq. 5.8.3.3-3).
    Page 2264 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Transverse reinforcement shear resistance (eq. 5.8.3.3-4).

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of the effective prestressing force. If same
    sign as Vu then the component is resisting the applied shear.

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance per 5.8.3.3-1 excluding Vp contribution.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio (includes Vp contribution).

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Section pass flag. It can be (1)Section passes; (2)Concrete Web Area not sufficient;
    (3)Minimum Transverse Rebar not provided; (4)Transverse Rebar not sufficient to cover
    demand or (5)Longitudinal Rebar not sufficient to cover demand.

    Field: AsVExtrPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of extra transverse rebar per unit length required in web to satisfy code minimumm
    reinforcement clause 5.8.2.5-2 and demands.

    Page 2265 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AsLExtrTop
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of extra longitudinal rebar required in top slab to satisfy demand.

    Field: AsLExtrBot
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of extra longitudinal rebar required in bottom slab to satisfy demand.
    Table: Bridge Super Design AASHTOLRFD12 15 - CBox2Flexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2266 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment resistance for the girder.

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Maximum moment demand for the girder.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment resistance for the girder.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Minimun moment demand for the girder.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Page 2267 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: PhiFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment resistance factor.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Page 2268 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Page 2269 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Field: ThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the bottom slab.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Page 2270 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.
    Page 2271 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fcConGirder
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the girder.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 - average.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Page 2272 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Page 2273 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Design AASHTOLRFD12 16 - SteelICompStrgth-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Page 2274 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.
    Page 2275 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longterm Modular Ratio.

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Page 2276 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Page 2277 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.
    Page 2278 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kcFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Bottom flange local buckling coefficient - A6.3.2-6.

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Page 2279 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the negative plastic moment.

    Field: LamwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of the web based on elastic negative moment - A6.2.2.

    Field: LampwDcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dc/tw for negative
    moment - A6.2.2.

    Field: LampwDcpWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dcp/tw for negative
    moment - A6.2.1.

    Field: LamrwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact web for negative moment - 6.10.1.10.2.

    Field: CmpctWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is web compact for negative moment?.

    Page 2280 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RpcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the bottom flange for negative moment. Reported only when
    Appendix A applied in the design.

    Field: RptWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the top flange for negative moment. Reported only when
    Appendix A applied in the design.

    Field: rt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment.6.10.8.2.3-9.

    Field: J
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    St. Venant torsional constant. Reported only when Appendix A applied in the design.

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for positive moment - 6.10.1.6.

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for negative moment - 6.10.1.6.

    Page 2281 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for positive moment - 6.10.1.10.1.

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for negative moment - 6.10.1.10.1.

    Field: CmpctGrdPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for positive moment?.

    Field: CmpctGrdNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for negative moment?.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.
    Page 2282 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Page 2283 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Field: PNADistLmt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limit on distance to plastic neutral axis for positive moment per 6.10.7.3-1.

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Page 2284 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for positive moment.

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section controlling yield moment capacity for negative moment.

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the bottom flange.

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the top flange.

    Field: Lp
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: Lr
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5 or
    A6.3.3-5.

    Page 2285 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.

    Field: BeamPBklShr
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not steel beam is proportioned to develop postbuckling shear resistance (eq.
    6.10.9.3.2-1).

    Field: IsCurved
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bridge curved?.

    Field: UsedAppA
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Has Appendix A been used to derive negative moment capacity?.
    Table: Bridge Super Design AASHTOLRFD12 17 - SteelICompStrgth-FlxPs

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2286 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Page 2287 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment for positive flexure. If negative, moment set to zero. Reported
    only if flexural resistance is expressed in terms of moment, otherwise set to zero.

    Field: fl
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored resistance moment for positive flexure. Reported only if flexural resistance is
    expressed in terms of moment, otherwise set to zero.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored axial force demand in girder. Reported only if applicable, otherwise set to zero.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment demand on noncomposite section used to evaluate fbu. Reported only
    for non-compact sections for which positive flexural resistance is expressed in terms of
    stress and Use Stage Analysis = No, otherwise set to zero.

    Page 2288 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment demand on long term composite section used to evaluate fbu. Reported
    only for non-compact sections for which positive flexural resistance is expressed in terms
    of stress and Use Stage Analysis = No, otherwise set to zero.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment demand on short term composite section used to evaluate fbu. Reported
    only for non-compact sections for which positive flexural resistance is expressed in terms
    of stress and Use Stage Analysis = No, otherwise set to zero.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to factored demand at the section cut calculated without
    the consideration of flange lateral bending. Reported only if applicable, otherwise set to
    zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to factored demand at the section cut calculated without
    the consideration of flange lateral bending. Reported only if applicable, otherwise set to
    zero.

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange for positive moment. Reported
    only if applicable, otherwise set to zero.

    Page 2289 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange for positive moment. Reported only if
    applicable, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design AASHTOLRFD12 18 - SteelICompStrgth-FlxNg

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2290 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment for negative flexure. If positive, moment set to zero. Reported
    only if flexural resistance is expressed in terms of moment, otherwise set to zero.
    Page 2291 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fl
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Field: MncFLB
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal flexural resistance moment for negative moment based on bottom flange local
    buckling. Reported only if applicable, otherwise set to zero.

    Field: MncLTB
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal flexural resistance moment for negative moment based on bottom flange lateral
    torsional buckling. Reported only if applicable, otherwise set to zero.

    Field: MrcNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Controlling factored flexural resistance moment for bottom flange for negative moment.
    Reported only if applicable, otherwise set to zero.

    Field: MrtNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored flexural resistance moment for top flange for negative moment. Reported only if
    applicable, otherwise set to zero.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored axial force demand in girder. Reported only if applicable, otherwise set to zero.

    Page 2292 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment demand on noncomposite section used to evaluate fbu. Reported only
    for non-compact sections for which negative flexural resistance is expressed in terms of
    stress and Use Stage Analysis = No, otherwise set to zero.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment demand on long term composite section used to evaluate fbu. Reported
    only for non-compact sections for which negative flexural resistance is expressed in terms
    of stress and Use Stage Analysis = No, otherwise set to zero.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment demand on short term composite section used to evaluate fbu. Reported
    only for non-compact sections for which negative flexural resistance is expressed in terms
    of stress and Use Stage Analysis = No, otherwise set to zero.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress due to factored demand at the section cut calculated
    without the consideration of flange lateral bending. Reported only if applicable, otherwise
    set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress due to factored demand at the section cut calculated without the
    consideration of flange lateral bending. Reported only if applicable, otherwise set to zero.

    Page 2293 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FncFLB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexural resistance stress for negative moment based on bottom flange local
    buckling. Reported only if applicable, otherwise set to zero.

    Field: FncLTB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexural resistance stress for negative moment based on bottom flange lateral
    torsional buckling. Reported only if applicable, otherwise set to zero.

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Controlling factored flexural resistance stress for bottom flange for negative moment.
    Reported only if applicable, otherwise set to zero.

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress for top flange for negative moment. Reported only if
    applicable, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - negative flexure.
    Table: Bridge Super Design AASHTOLRFD12 19 - SteelICompStrgth-Shear

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2294 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2295 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear (absolute value).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear buckling resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Plastic shear force.

    Page 2296 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear buckling resistance to shear yield strength.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coefficient.

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: d0req
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Suggested minimum transverse stiffener spacing to achieve D/C=1. Value set to d0 during
    optimization.

    Field: VrWithD0req
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance based on d0req transverse stiffner spacing. Value not
    recalculated during optimization.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - shear.
    Table: Bridge Super Design AASHTOLRFD12 20 - SteelICompServ-Prop

    Page 2297 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.
    Page 2298 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longterm Modular Ratio.

    Page 2299 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Page 2300 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Page 2301 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.

    Field: kcFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Bottom flange local buckling coefficient - A6.3.2-6.

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.
    Page 2302 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the negative plastic moment.

    Field: LamwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of the web based on elastic negative moment - A6.2.2.

    Page 2303 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LampwDcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dc/tw for negative
    moment - A6.2.2.

    Field: LampwDcpWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dcp/tw for negative
    moment - A6.2.1.

    Field: LamrwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact web for negative moment - 6.10.1.10.2.

    Field: CmpctWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is web compact for negative moment?.

    Field: RpcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the bottom flange for negative moment. Reported only when
    Appendix A applied in the design.

    Field: RptWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the top flange for negative moment. Reported only when
    Appendix A applied in the design.

    Page 2304 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: rt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment.6.10.8.2.3-9.

    Field: J
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    St. Venant torsional constant. Reported only when Appendix A applied in the design.

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for positive moment - 6.10.1.6.

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for negative moment - 6.10.1.6.

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for positive moment - 6.10.1.10.1.

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for negative moment - 6.10.1.10.1.

    Field: CmpctGrdPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for positive moment?.
    Page 2305 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmpctGrdNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for negative moment?.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Page 2306 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Page 2307 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PNADistLmt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limit on distance to plastic neutral axis for positive moment per 6.10.7.3-1.

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for positive moment.

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section controlling yield moment capacity for negative moment.

    Page 2308 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the bottom flange.

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the top flange.

    Field: Lp
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: Lr
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5 or
    A6.3.3-5.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.

    Field: BeamPBklShr
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not steel beam is proportioned to develop postbuckling shear resistance (eq.
    6.10.9.3.2-1).
    Table: Bridge Super Design AASHTOLRFD12 21 - SteelICompServ-FlxPs

    Page 2309 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Page 2310 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section.

    Page 2311 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ffTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress at the section cut calculated without the consideration of
    flange lateral bending.

    Field: ffBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress at the section cut calculated without the consideration of
    flange lateral bending.

    Field: fl
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber compression stress at the section cut.

    Field: FrTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of top compression flange for positive moment.

    Field: FrBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of bottom tension flange for positive moment.

    Page 2312 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 22 - SteelICompServ-FlxNg

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.
    Page 2313 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section.

    Page 2314 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section.

    Field: ffTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress at the section cut calculated without the consideration of flange
    lateral bending.

    Field: ffBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress at the section cut calculated without the consideration of
    flange lateral bending.

    Field: fl
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber tension stress at the section cut.

    Field: FrTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of top tension flange for negative moment.

    Page 2315 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of bottom compression flange for negative moment.

    Field: Dc
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in the elastic range.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Bend-buckling coefficient.

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal bend buckling resistance for webs.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 23 - SteelICompWebFatigue

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.
    Page 2316 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Page 2317 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for fatigue shear.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: DepthWeb
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Page 2318 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear buckling resistance to shear yield strength.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coefficient.

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Plastic shear force.

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear buckling resistance.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand force (absolute value).

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - shear.
    Table: Bridge Super Design AASHTOLRFD12 24 - SteelICompCstrStg-Prop
    Page 2319 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.
    Page 2320 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the slab.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Page 2321 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Field: fyrFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange stress at the onset of nominal yielding within the cross section, including
    residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of top flange - 6.10.8.2.2-3.

    Field: LampfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact top flange - 6.10.8.2.2-4.
    Page 2322 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LamrfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact top flange - 6.10.8.2.2-5.

    Field: CmpctFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is top flange compact for positive moment - 0=False, 1=True.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.
    Page 2323 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for positive moment - 6.10.1.6.

    Page 2324 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for negative moment - 6.10.1.6.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Bottom flange unbraced length as determined from the diaphragm location and type. Same
    value used also for top flange unbraced length when slab status = non-composite.
    Table: Bridge Super Design AASHTOLRFD12 25 - SteelICompCstrStg-FlxPs

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2325 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. It is either non-composite or composite).

    Page 2326 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to factored demand at the section cut calculated without
    the consideration of flange lateral bending. Reported only if applicable, otherwise set to
    zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to factored demand at the section cut calculated without
    the consideration of flange lateral bending. Reported only if applicable, otherwise set to
    zero.

    Field: flTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange lateral bending stress.

    Field: flBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber compression stress at the section cut.

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal bend buckling resistance for webs without longitudinal stiffeners.

    Page 2327 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Dc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Depth of web in compression in the elastic range.

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybridg factor for positive moment - 6.10.1.10.1.

    Field: rt
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for positive moment.- 6.10.8.2.39.

    Field: Lp
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4.

    Field: Lr
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of top flange residual stress effects 6.10.8.2.3-5.

    Field: FncFLB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for positive moment based on top flange local
    buckling. Reported only if applicable, otherwise set to zero.

    Page 2328 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FncLTB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for positive moment based on top flange lateral
    torsional buckling. Reported only if applicable, otherwise set to zero.

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange for positive moment. Reported
    only if applicable, otherwise set to zero.

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange for positive moment. Reported only if
    applicable, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design AASHTOLRFD12 26 - SteelICompCstrStg-FlxNg

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2329 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Page 2330 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. It is either non-composite or composite).

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress due to factored demand at the section cut calculated
    without the consideration of flange lateral bending. Reported only if applicable, otherwise
    set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress due to factored demand at the section cut calculated without the
    consideration of flange lateral bending. Reported only if applicable, otherwise set to zero.

    Field: flTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange lateral bending stress.

    Field: flBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Page 2331 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber tension stress at the section cut.

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal bend buckling resistance for webs without longitudinal stiffeners.

    Field: Dc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Depth of web in compression in the elastic range.

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybridg factor for negative moment - 6.10.1.10.1.

    Field: rt
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment.6.10.8.2.3-9.

    Field: Lp
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4.

    Page 2332 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lr
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5.

    Field: FncFLB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for negative moment based on bottom flange local
    buckling.

    Field: FncLTB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for negative moment based on bottom flange lateral
    torsional buckling.

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Controlling factored flexural resistance stress for bottom flange for negative moment.
    Reported only if applicable, otherwise set to zero.

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress for top flange for negative moment. Reported only if
    applicable, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - negative flexure.
    Table: Bridge Super Design AASHTOLRFD12 27 - SteelICompCstrStg-Shear

    Page 2333 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Page 2334 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The Output Label defined in the staged construction load case.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. It is either non-composite or composite).

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear (absolute value).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Page 2335 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear buckling resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Plastic shear force.

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear buckling resistance to shear yield strength.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coefficient.

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: d0req
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Suggested minimum transverse stiffener spacing to achieve D/C=1. Value set to d0 during
    optimization.

    Page 2336 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VrWithD0req
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance based on d0req transverse stiffner spacing. Value not
    recalculated during optimization.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - shear.
    Table: Bridge Super Design AASHTOLRFD12 28 - SteelICompCstrNStg-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2337 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the slab.
    Page 2338 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Page 2339 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fyrFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange stress at the onset of nominal yielding within the cross section, including
    residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of top flange - 6.10.8.2.2-3.

    Field: LampfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact top flange - 6.10.8.2.2-4.

    Field: LamrfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact top flange - 6.10.8.2.2-5.

    Field: CmpctFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is top flange compact for positive moment - 0=False, 1=True.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.
    Page 2340 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.
    Page 2341 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for positive moment - 6.10.1.6.

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for negative moment - 6.10.1.6.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.
    Table: Bridge Super Design AASHTOLRFD12 29 - SteelICompCstrNStg-FlxPs

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.
    Page 2342 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Page 2343 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. It is either non-composite or composite).

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to factored demand at the section cut calculated without
    the consideration of flange lateral bending. Reported only if applicable, otherwise set to
    zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to factored demand at the section cut calculated without
    the consideration of flange lateral bending. Reported only if applicable, otherwise set to
    zero.

    Field: flTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange lateral bending stress.

    Field: flBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Page 2344 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber compression stress at the section cut.

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal bend buckling resistance for webs without longitudinal stiffeners.

    Field: Dc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Depth of web in compression in the elastic range.

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybridg factor for positive moment - 6.10.1.10.1.

    Field: rt
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for positive moment.- 6.10.8.2.39.

    Field: Lp
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4.

    Page 2345 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lr
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of top flange residual stress effects 6.10.8.2.3-5.

    Field: FncFLB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for positive moment based on top flange local
    buckling. Reported only if applicable, otherwise set to zero.

    Field: FncLTB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for positive moment based on top flange lateral
    torsional buckling. Reported only if applicable, otherwise set to zero.

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange for positive moment. Reported
    only if applicable, otherwise set to zero.

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange for positive moment. Reported only if
    applicable, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design AASHTOLRFD12 30 - SteelICompCstrNStg-FlxNg

    Page 2346 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2347 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. It is either non-composite or composite).

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress due to factored demand at the section cut calculated
    without the consideration of flange lateral bending. Reported only if applicable, otherwise
    set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress due to factored demand at the section cut calculated without the
    consideration of flange lateral bending. Reported only if applicable, otherwise set to zero.

    Page 2348 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: flTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange lateral bending stress.

    Field: flBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress.

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber tension stress at the section cut.

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal bend buckling resistance for webs without longitudinal stiffeners.

    Field: Dc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Depth of web in compression in the elastic range.

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybridg factor for negative moment - 6.10.1.10.1.

    Field: rt
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment.6.10.8.2.3-9.
    Page 2349 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lp
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4.

    Field: Lr
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5.

    Field: FncFLB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for negative moment based on bottom flange local
    buckling.

    Field: FncLTB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Nominal flexureal resistance stress for negative moment based on bottom flange lateral
    torsional buckling.

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Controlling factored flexural resistance stress for bottom flange for negative moment.
    Reported only if applicable, otherwise set to zero.

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress for top flange for negative moment. Reported only if
    applicable, otherwise set to zero.

    Page 2350 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - negative flexure.
    Table: Bridge Super Design AASHTOLRFD12 31 - SteelICompCstrNStg-Shear

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.
    Page 2351 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The Output Label defined in the staged construction load case.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. It is either non-composite or composite).

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear (absolute value).

    Page 2352 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear buckling resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Plastic shear force.

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear buckling resistance to shear yield strength.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coefficient.

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: d0req
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Suggested minimum transverse stiffener spacing to achieve D/C=1. Value set to d0 during
    optimization.
    Page 2353 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VrWithD0req
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance based on d0req transverse stiffner spacing. Value not
    recalculated during optimization.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio - shear.
    Table: Bridge Super Design AASHTOLRFD12 32 - SteelUCompStrgth-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 2354 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Page 2355 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Page 2356 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: ABeamEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: IxBeamEff
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    .

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Page 2357 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: AFlgBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: AFlgBotEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: kFctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: ksFctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Page 2358 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VDepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: WebAngle
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Page 2359 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: A0
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: CmpctGrdPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Page 2360 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Page 2361 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: PNADistLmt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Page 2362 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: BeamPBklShr
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: IsCurved
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .
    Table: Bridge Super Design AASHTOLRFD12 33 - SteelUCompStrgth-FlxPs

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .
    Page 2363 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 2364 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: Tu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Page 2365 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fv
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Delta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 34 - SteelUCompStrgth-FlxNg
    Page 2366 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 2367 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: Tu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Page 2368 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fv
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Delta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Fyr
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Page 2369 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lambdaf
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Lambdap
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Lambdar
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Fcv
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Fcb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Page 2370 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 35 - SteelUCompStrgth-Shear

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Page 2371 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: TorIncluded
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Page 2372 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Tu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: fv
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Vtor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Page 2373 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: d0req
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: VrWithD0req
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 36 - SteelUCompServ-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Page 2374 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Page 2375 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Page 2376 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: ABeamEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: IxBeamEff
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    .

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Page 2377 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: AFlgBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: AFlgBotEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Page 2378 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kFctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: ksFctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: VDepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: WebAngle
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Page 2379 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: A0
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Page 2380 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmpctGrdPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Page 2381 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    .

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: PNADistLmt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Page 2382 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: BeamPBklShr
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .
    Table: Bridge Super Design AASHTOLRFD12 37 - SteelUCompServ-FlxPs

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Page 2383 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 2384 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: ffTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: ffBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Page 2385 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: FrTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: FrBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 38 - SteelUCompServ-FlxNg

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .
    Page 2386 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 2387 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: ffTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: ffBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Page 2388 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FrTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: FrBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Dc
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 39 - SteelUCompWebFatigue

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Page 2389 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 2390 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: VDepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Page 2391 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WebAngle
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Page 2392 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TorIncluded
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: Tu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: fv
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Vtor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 40 - SteelUCompCstrStg-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Page 2393 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Page 2394 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    .

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Page 2395 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fyrFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: LamfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: LampfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: LamrfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: CmpctFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Page 2396 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: AFlgBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: AFlgBotEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: kFctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: ksFctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Page 2397 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VDepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: WebAngle
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .
    Table: Bridge Super Design AASHTOLRFD12 41 - SteelUCompCstrStg-FlxPs
    Page 2398 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 2399 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: flTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Page 2400 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Tu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Dc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: rt
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Lp
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Page 2401 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lr
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: FncFLB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: FncLTB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fvTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DeltaTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fvBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Page 2402 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DeltaBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 42 - SteelUCompCstrStg-FlxNg

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Page 2403 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 2404 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: flTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Tu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Dc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Page 2405 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: fvBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DeltaBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Fyr
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Lambdaf
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Lambdap
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Lambdar
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Page 2406 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fcv
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Fcb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: FrcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fvTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DeltaTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: FrtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 43 - SteelUCompCstrStg-Shear
    Page 2407 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 2408 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: TorIncluded
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Page 2409 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Tu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: fv
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Vtor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Page 2410 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: d0req
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: VrWithD0req
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 44 - SteelUCompCstrNStg-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Page 2411 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Page 2412 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    .

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Page 2413 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fyrFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: LamfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: LampfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: LamrfFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: CmpctFlgTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Page 2414 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: AFlgBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: AFlgBotEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: kFctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: ksFctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: VDepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Page 2415 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .

    Field: WebAngle
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    .
    Table: Bridge Super Design AASHTOLRFD12 45 - SteelUCompCstrNStg-FlxPs

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Page 2416 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 2417 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: flTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Page 2418 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Tu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Dc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: rt
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Lp
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Lr
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Page 2419 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FncFLB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: FncLTB
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fvTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DeltaTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fvBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DeltaBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Page 2420 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 46 - SteelUCompCstrNStg-FlxNg

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Page 2421 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Page 2422 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: flTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Tu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Field: Fcrw
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Dc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Page 2423 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fvBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DeltaBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Fyr
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Lambdaf
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Lambdap
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Lambdar
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: Fcv
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Page 2424 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Fcb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: FrcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: fvTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DeltaTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: FrtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design AASHTOLRFD12 47 - SteelUCompCstrNStg-Shear

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Page 2425 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Label
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 2426 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: TorIncluded
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: Tu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    .

    Page 2427 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fv
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Vtor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Page 2428 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: d0req
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: VrWithD0req
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .
    Table: Bridge Super Design JTG-D62-2004 01 - CBoxStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2429 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for the bridge section.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.
    Page 2430 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design JTG-D62-2004 02 - CBoxCrkStress
    Page 2431 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for the bridge section.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Page 2432 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.
    Table: Bridge Super Design JTG-D62-2004 03 - CBoxFlexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2433 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment resistance for the bridge section.

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Maximum moment demand for the bridge section.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment resistance for the bridge section.

    Page 2434 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Minimum moment demand for the bridge section.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Field: PhiFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment resistance factor.

    Field: FcdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: NumWebs
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Number of webs in the bridge section at this station.

    Field: SumWebWdth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Sum of web widths.

    Page 2435 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: AreaSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the top slab for the bridge section at this station.

    Field: AreaSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the bottom slab for the bridge section at this station.

    Field: WdthSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the top slab for the bridge section at this station.

    Field: WdthSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the bottom slab for the bridge section at this station.

    Field: EqThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the top slab for the bridge section at this station.

    Page 2436 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the bottom slab for the bridge section at this station.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: CGSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from Centroid of section to centroid of top slab.

    Page 2437 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from Centroid of section to centroid of bottom slab.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: FactorXib
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor Xi_b per table 5.2.1 (limiting depth of compession zone).

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: XCompForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    x - depth of compression zone positive.

    Page 2438 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: XCompForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    x - depth of compression zone negative.
    Table: Bridge Super Design JTG-D62-2004 04 - CBoxShear-SectProp

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: FcukConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete grade.

    Field: FcdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design concrete compression strength.
    Page 2439 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FtdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design concrete tendion strength.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.

    Field: Gamma0
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Gamma0 factor.

    Field: Alpha1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Alpha1 factor.

    Field: Alpha2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Alpha2 factor.

    Field: Alpha3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Alpha3 factor.

    Page 2440 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Zeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Zeta factor.

    Field: Ppercent
    Field is Imported: No
    Format: Controlled by program
    Units: Percent
    P as percentage.

    Field: 13
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area inside torsion circuit.

    Field: LTorsCir
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Perimeter of torsion circuit.

    Field: tMinTorsCir
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Minimum thickness of torsion circuit.

    Field: WTorsCir
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Plastic torsion modulus.

    Field: BetaACalc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Beta_a calculated.

    Page 2441 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BetaADesign
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Beta_a used for design, set to zero if less than 0.4.

    Field: Height
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Vertical section height.

    Field: AreaNp0
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Total concrete area A0 for use with Np0.

    Field: ATConcLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of concrete on torsion circuit for rTRebarLong.
    Table: Bridge Super Design JTG-D62-2004 05 - CBoxShear-SectResult

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2442 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the D/C ratio.

    Field: CtrlAsVperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of transverse shear rebar per unit length
    (AsVperL).

    Field: CtrlAsTperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of torsional rebar per unit length (AsTPerL).
    Page 2443 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlAsTLong
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudial torsional rebar (AsTLong).

    Field: Pd
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand P for controlling D/C.

    Field: V2d
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand V2 for controlling D/C.

    Field: V3d
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand V3 for controlling D/C.

    Field: Td
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand T for controlling D/C.

    Field: M2d
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand M2 for controlling D/C.

    Field: M3d
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand Ms for controlling D/C.

    Page 2444 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V2dWResal
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand V2 with resal for controlling D/C.

    Field: HeightEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective vertical section height from centroid of tension tendons.

    Field: BetaT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Beta_t.

    Field: Np0
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Tendon force Np0.

    Field: Ep0
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Eccentricity of tendon force Np0.

    Field: Zeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Zeta factor.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and capacity.

    Page 2445 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AsVPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of shear rebar per length.

    Field: AsTPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of torsional rebar per length.

    Field: AsTLong
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal torsional rebar.

    Field: rsTLong
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Area ratio of longitudinal torsional rebar.

    Field: AsTLongFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controling flag for Area of longitudinal torsional rebar, Min = minimum, Calc =
    determined by demand.

    Field: ResultsFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Failure Flag, Pass or Fail.
    Table: Bridge Super Design JTG-D62-2004 06 - CBoxShear-WebProp

    Page 2446 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Web
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The web name.

    Field: WdthHor
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective web width.

    Field: Inclination
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle from vertical.

    Page 2447 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Thickness
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Web thickness.

    Field: DistribFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Load distribution factor.
    Table: Bridge Super Design JTG-D62-2004 07 - CBoxShear-WebResult

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Web
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder index counted from the left to the right of the bridge section.
    Page 2448 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the D/C ratio.

    Field: CtrlAsVperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of transverse shear rebar per unit length
    (AsVperL).

    Field: CtrlAsTperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of torsional rebar per unit length (AsTPerL).

    Field: Vd
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design shear.
    Page 2449 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Td
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design torsion.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and capacity.

    Field: AsVPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of shear rebar per length.

    Field: AsTPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of torsional rebar per length.

    Field: AsPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Area of total stirrup rebar per length.

    Field: rsVPerL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Area ratio of shear rebar.

    Field: rsTPerL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Area ratio of torsional rebar.

    Page 2450 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: rsPerL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Area ratio of total stirrup rebar.

    Field: AsVFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controlling flag for area of shear rebar per length, Min = minimum, Calc = determined by
    demand.

    Field: AsTFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controlling flag for area of torsional rebar per length, None = not part of circuit, Min =
    minimum, Calc = determined by demand.

    Field: ResultsFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Failure Flag, Pass or Fail.
    Table: Bridge Super Design JTG-D62-2004 08 - CBoxPrinc

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2451 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Web
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder index counted from the left to the right of the bridge section.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this web.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Page 2452 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at this web.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at this web.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design JTG-D62-2004 09 - CBoxCrkPrinc
    Page 2453 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Web
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder index counted from the left to the right of the bridge section.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this web.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Page 2454 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at this web.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.
    Table: Bridge Super Design JTG-D62-2004 10 - CBoxTendonStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2455 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: TendonObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: ResultsFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Stress
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: StressLim
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The ratio of Stress / StressLim.
    Table: Bridge Super Design JTG-D62-2004 11 - CBoxCrackWidth
    Page 2456 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Position
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: ResultsFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: LTermCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 2457 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: STermCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: FactC2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: AxisDist
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: StressTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: StressBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: StressSS
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: CrkWdth
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Page 2458 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CrkWdthLim
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: Message
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Table: Bridge Super Design CANCSAS606 01 - CBoxStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for the bridge section.
    Page 2459 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.
    Page 2460 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design CANCSAS606 02 - CBoxShear-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.
    Page 2461 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LDFMandN
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Portion of total demand moment and axial force assigned to be carried by the web.

    Field: LDFV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Portion of total demand shear assigned to be carried by the web.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: WebWidthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective girder web width per 8.9.1.6.

    Page 2462 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ec
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of concrete.

    Field: fc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of concrete.

    Field: EsRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of reinforcement.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.

    Field: Acp
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area enclosed by the outside perimeter of a concrete cross-section, including the area of
    holes, if any.

    Page 2463 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Aoh
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area enclosed by the centreline of exterior closed transverse torsion reinforcement,
    including the area of voids, if any.

    Field: Ao
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area enclosed by shear flow path, including the area of holes, if any.

    Field: pc
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Outside perimeter of a concrete section.

    Field: ph
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Perimeter of closed transverse torsion reinforcement measured along its centreline.
    Table: Bridge Super Design CANCSAS606 03 - CBoxShear-Result

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2464 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatV
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the D/C shear ratio per 8.9.3.3.

    Page 2465 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlDCRatT
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the D/C torsion ratio per 8.9.3.18 a.

    Field: CtrlAsVperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: CtrlAsLBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the bottom slab.

    Field: CtrlAsLTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the top slab.

    Field: CtrlAt
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of closed transverse torsion reinforcement.

    Field: Vf
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored demad shear force.

    Field: Nf
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored demand axial force (positive if tensile).

    Page 2466 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mf
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of all of the effective prestressing forces
    crossing the critical section factored by p.

    Field: Tf
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored demand torsion.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth from extreme compression fiber to the centroid of the tensile force in the
    tensile reinforcement per 8.9.1.5.

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth per 8.9.1.5.

    Field: AreaPTLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal prestressed tendons on the tension flexural side of girder.

    Page 2467 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fpo
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Ep
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average modulus of elasticity of prestressing tendons on the tension flexural side of
    girder.

    Field: AcTens
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of concrete on the flexural tension side of the member. (Figure C8.11).

    Field: DCRatioV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear demand and capacity per 8.9.3.3.

    Field: DCRatioT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of torsion demand and capacity per 8.9.3.18 a.

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Pass or Fail.

    Field: EpsilonX
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longitudinal strain per eq. 8.9.3.8.
    Page 2468 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BetaFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used to account for the shear resistance of cracked concrete per 8.9.3.7.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle of inclination of the principal diagonal compressive stresses to the longitudinal axis
    of a member per 8.9.3.7.

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance per 8.9.3.4.

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Transverse reinforcement shear resistance per 8.9.3.5.

    Field: AsVPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse shear reinforcement per unit length.

    Field: AsVFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controlling flag for AsVPerL.

    Field: AsLTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the top slab.
    Page 2469 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AsLBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the bottom slab.

    Field: Tcr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Torsional cracking resistance per 8.9.1.1.

    Field: TorFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controlling flag Torsion.

    Field: At
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Required area of closed transverse torsion reinforcement per unit length per 8.9.3.17.
    Table: Bridge Super Design CANCSAS606 04 - CBoxFlexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2470 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment resistance for the bridge section.

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Maximum moment demand for the bridge section.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment resistance for the bridge section.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Minimum moment demand for the bridge section.

    Page 2471 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Field: RstFctrConc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Concrete Resistance Factor.

    Field: RstFctrPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Prestressing Resistance Factor.

    Field: RstFctrBar
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reinforcement Resistance Factor.

    Field: AreaSect
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the bridge section at this station.

    Field: I33Sect
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    The section property I33 of the bridge section at this station.

    Page 2472 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Page 2473 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: AreaSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the top slab for the bridge section at this station.

    Field: EqThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the top slab for the bridge section at this station.

    Field: WdthSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the top slab for the bridge section at this station.

    Field: NumWebs
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Number of webs in the bridge section at this station.

    Page 2474 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SumWebWdth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Sum of web widths.

    Field: AreaSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the bottom slab for the bridge section at this station.

    Field: EqThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the bottom slab for the bridge section at this station.

    Field: WdthSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the bottom slab for the bridge section at this station.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.
    Page 2475 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    kp - per 8.8.4.2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    kp - per 8.8.4.2 bottom.

    Page 2476 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FcConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: Aplha1Fctr
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor aplha 1 per 8.8.3.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta 1 per 8.8.3.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Page 2477 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (8.8.4.2) for positive moment.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (8.8.4.2) for negative moment.
    Table: Bridge Super Design CANCSAS606 05 - CBox2Stress

    Page 2478 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this GirderPart.

    Field: LLDFMPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M+ regions.

    Page 2479 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFMNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M- regions.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.

    Field: MRegionMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Moment region sign used to evaluate StressMax.
    Page 2480 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: MRegionMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Moment region sign used to evaluate StressMin (1=M+; 2=M-; 3=N/A).

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Page 2481 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design CANCSAS606 06 - CBox2Shear-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFVMPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear in M+ regions.
    Page 2482 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFVMNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear in M- regions.

    Field: LLDFMPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M+ regions.

    Field: LLDFMNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M- regions.

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section Nu and Vp to obtain girder Nu and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: WebWidthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective girder web width per 8.9.1.6.

    Field: Ec
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of concrete.

    Page 2483 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of concrete.

    Field: EsRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of reinforcement.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.
    Table: Bridge Super Design CANCSAS606 07 - CBox2Shear-Result

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2484 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: MomRegion
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Live load moment region sign.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the D/C ratio.

    Page 2485 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlAsVperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: CtrlAsLBeam
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the extra required lonitudinal rebar in concrete beam.

    Field: CtrlAsLSlab
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the extra required lonitudinal rebar in composite slab.

    Field: Vf
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored demad shear force.

    Field: Nf
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored demand axial force (positive if tensile).

    Field: Mf
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of all of the effective prestressing forces
    crossing the critical section factored by p.
    Page 2486 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth from extreme compression fiber to the centroid of the tensile force in the
    tensile reinforcement per 8.9.1.5.

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth per 8.9.1.5.

    Field: AreaPTLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal prestressed tendons on the tension flexural side of girder.

    Field: fpo
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Ep
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average modulus of elasticity of prestressing tendons on the tension flexural side of
    girder.

    Field: AcTens
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of concrete on the flexural tension side of the member. (Figure C8.11).

    Page 2487 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and capacity per 8.9.3.3.

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Pass or Fail.

    Field: EpsilonX
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longitudinal strain per eq. 8.9.3.8.

    Field: BetaFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used to account for the shear resistance of cracked concrete per 8.9.3.7.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle of inclination of the principal diagonal compressive stresses to the longitudinal axis
    of a member per 8.9.3.7.

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance per 8.9.3.4.

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Transverse reinforcement shear resistance per 8.9.3.5.
    Page 2488 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AsVPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse shear reinforcement per unit length.

    Field: AsVFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controlling flag for AsVPerL.

    Field: AsLTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the top slab.

    Field: AsLBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the bottom slab.
    Table: Bridge Super Design CANCSAS606 08 - CBox2Flexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2489 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment resistance for the girder.

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Maximum moment demand for the girder.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment resistance for the girder.

    Page 2490 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Minimun moment demand for the girder.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Field: LLDFMPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M+ regions.

    Field: LLDFMNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M- regions.

    Field: PhiConc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Concrete Resistance Factor.

    Field: PhiPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Prestressing Resistance Factor.

    Page 2491 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiRebar
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reinforcement Resistance Factor.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Page 2492 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Field: WSlabTriTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Tributary width of the top slab.

    Page 2493 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Field: ThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the bottom slab.

    Field: WSlabTriBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Tributary width of the bottom slab.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Page 2494 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.
    Page 2495 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kpFactTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    kp - per 8.8.4.2 top.

    Field: kpFactBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    kp - per 8.8.4.2 bottom.

    Field: fcConGirder
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the girder.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: Alpha1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor aplha 1 per 8.8.3.

    Field: Beta1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta 1 per 8.8.3.

    Page 2496 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Page 2497 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (8.8.4.2) for positive moment. If
    cDistForPos>0.5dp then fps is set to 0.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (8.8.4.2) for negative moment. If
    cDistForNeg>0.5dp then fps is set to 0.
    Table: Bridge Super Design CANCSAS606 09 - PCCompStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2498 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: GirderPart
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Slab or Beam.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this GirderPart.

    Field: LLDFMPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M+ regions.

    Field: LLDFMNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M- regions.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Page 2499 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.

    Field: MRegionMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Moment region sign used to evaluate StressMax.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.
    Page 2500 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: MRegionMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Moment region sign used to evaluate StressMin (1=M+; 2=M-; 3=N/A).

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design CANCSAS606 10 - PCCompShear-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.
    Page 2501 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFVMPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear in M+ regions.

    Field: LLDFVMNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear in M- regions.

    Field: LLDFMPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M+ regions.

    Field: LLDFMNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M- regions.

    Page 2502 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section Nu and Vp to obtain girder Nu and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: Ec
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of concrete.

    Field: fc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of concrete.

    Field: EsRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of reinforcement.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.
    Table: Bridge Super Design CANCSAS606 11 - PCCompShear-Result
    Page 2503 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2504 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: MomRegion
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Live load moment region sign.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the D/C ratio.

    Field: CtrlAsVperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    .

    Field: CtrlAsLBeam
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the extra required lonitudinal rebar in concrete beam.

    Field: CtrlAsLSlab
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the extra required lonitudinal rebar in composite slab.

    Field: Vf
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored demad shear force.

    Page 2505 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Nf
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored demand axial force (positive if tensile).

    Field: Mf
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of all of the effective prestressing forces
    crossing the critical section factored by p.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth from extreme compression fiber to the centroid of the tensile force in the
    tensile reinforcement per 8.9.1.5.

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth per 8.9.1.5.

    Field: AreaPTLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal prestressed tendons on the tension flexural side of girder.

    Page 2506 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fpo
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: Ep
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average modulus of elasticity of prestressing tendons on the tension flexural side of
    girder.

    Field: AcTens
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of concrete on the flexural tension side of the member. (Figure C8.11).

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of demand and capacity per 8.9.3.3.

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Pass or Fail.

    Field: EpsilonX
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longitudinal strain per eq. 8.9.3.8.

    Field: BetaFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used to account for the shear resistance of cracked concrete per 8.9.3.7.
    Page 2507 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle of inclination of the principal diagonal compressive stresses to the longitudinal axis
    of a member per 8.9.3.7.

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance per 8.9.3.4.

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Transverse reinforcement shear resistance per 8.9.3.5.

    Field: AsVPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse shear reinforcement per unit length.

    Field: AsVFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controlling flag for AsVPerL.

    Field: AsLTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the top slab.

    Field: AsLBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the bottom slab.
    Page 2508 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Bridge Super Design CANCSAS606 12 - PCCompFlexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment resistance for the girder.

    Page 2509 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Maximum moment demand for the girder.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment resistance for the girder.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Minimun moment demand for the girder.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Page 2510 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFMPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M+ regions.

    Field: LLDFMNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M- regions.

    Field: PhiConc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Concrete Resistance Factor.

    Field: PhiPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Prestressing Resistance Factor.

    Field: PhiRebar
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reinforcement Resistance Factor.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Page 2511 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.
    Page 2512 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Field: WSlabTriTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Tributary width of the top slab.

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: ThBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam top flange.

    Field: WdthBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam top flange.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Page 2513 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam bottom flange.

    Field: WdthBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam bottom flange.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).
    Page 2514 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.

    Field: kpFactTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    kp - per 8.8.4.2 top.

    Field: kpFactBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    kp - per 8.8.4.2 bottom.

    Field: fcCompSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: fcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the beam.

    Page 2515 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: Alpha1Pos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor aplha 1 per 8.8.3 - positive.

    Field: Alpha1Neg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor aplha 1 per 8.8.3 - negative.

    Field: Beta1Pos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta 1 per 8.8.3 - positive.

    Field: Beta1Neg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta 1 per 8.8.3 - negative.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Page 2516 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (8.8.4.2) for positive moment. If
    cDistForPos>0.5dp then fps is set to 0.

    Page 2517 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (8.8.4.2) for negative moment. If
    cDistForNeg>0.5dp then fps is set to 0.
    Table: Bridge Super Design CANCSAS606 13 - SteelICompStrgth-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Page 2518 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFMM+
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M+ regions.

    Field: LLDFMMField is Imported: No


    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M- regions.

    Field: LLDFVM+
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear in M+ regions.

    Field: LLDFVMField is Imported: No


    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear in M- regions.

    Field: SectClsPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for positive bending.

    Field: SectClsNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for negative bending.
    Page 2519 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ASlabEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of the concrete composite slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the composite slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Long-term Modular Ratio.

    Page 2520 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ARebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fyLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the beam.

    Page 2521 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether the beam is rolled section or not.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange design yield strength fyd.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange width.

    Page 2522 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange design yield strength fyd.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web design yield strength fyd.

    Field: DcWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for positive moment.

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Page 2523 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the negative plastic moment.

    Field: AeWebPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web for positive moment.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Page 2524 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Page 2525 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for positive moment.

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section controlling yield moment capacity for negative moment.

    Page 2526 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the bottom flange.

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the top flange.

    Field: DiaphDwnSta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Section cut index of nearest downstation diaphragm or rigid support.

    Field: DiaphUpSta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Section cut index of nearest upstation diaphragm or rigid support.

    Field: BetaXNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient of monosymmetry for negative moment.

    Field: Cw
    Field is Imported: No
    Format: Length6 (Section Dimensions section of form)
    Units: Length6
    Warping torsional constant.

    Field: B1Neg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Geometric coefficient for laterally unsuported monosymmetric I beam per 10.10.2.3 for
    negative bending.
    Page 2527 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: B2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Geometric coefficient for laterally unsuported monosymmetric I beam per 10.10.2.3.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.
    Table: Bridge Super Design CANCSAS606 14 - SteelICompStrgth-FlxPos

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2528 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If negative moment set to zero.

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for positive bending.

    Page 2529 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 15 - SteelICompStrgth-FlxNeg

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.
    Page 2530 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If positive moment set to zero.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder. Considered only when design request parameter "Use Stage
    Analysis?" is set to Yes.

    Page 2531 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. Reported as zero for Class 3 sections where
    design request parameter "Use Stage Analysis?" is set to Yes.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. Reported as zero for Class 3 sections
    where design request parameter "Use Stage Analysis?" is set to Yes.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. Reported as zero for Class 3 sections
    where design request parameter "Use Stage Analysis?" is set to Yes.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress due to demand at the section cut. Reported only for
    Class 3 sections, otherwise set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress due to demand at the section cut. Reported only for Class 3
    sections, otherwise set to zero.

    Field: fRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tension stress at top most rebar at the section cut. Reported only for Class 3 sections,
    otherwise set to zero.

    Page 2532 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MDiaphDown
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest downstation diaphragm or rigid support.

    Field: MDiaphUp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest upstation diaphragm or rigid support. Set to zero if sign is
    different from demand moment on downstation diaphragm.

    Field: kappa
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of smaller factored moment to the larger factored moments at opposite ends of an
    ubraced length per 10.10.2.3. Calculated only when option "Program determined" for
    omega2 is selected.

    Field: omega2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient to account for increased moment resistance of a laterally unsuported beam
    segment when subject to moment gradient per 10.10.2.3.

    Field: MuCritElast
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Critical elastic moment per 10.10.2.3.

    Field: MrNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for negative bending. Reported only for Class 1 and 2
    sections, otherwise set to zero.

    Page 2533 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for negative moment. Reported
    only for Class 3 sections, otherwise set to zero.

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for negative moment. Reported only for
    Class 3 sections, otherwise set to zero.

    Field: fyLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum yield strength of longitudinal rebar.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 16 - SteelICompStrgth-Shear

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2534 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2535 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: a
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: kv
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coeffitient per 10.10.5.1.

    Field: Fcr
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Shear buckling stress per 10.10.5.1.

    Field: Ft
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tension field component of post-buckling stress per 10.10.5.1.

    Page 2536 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 17 - SteelICompStrgth-FlxShrPos

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.
    Page 2537 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If negative moment set to zero. Reported only for Class 1 and 2
    sections.

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for positive bending.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).
    Page 2538 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: WebTField
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Whether or not the webs depend on tension field to carry shear, i.e. is h/w>502sqrt(kv/Fy)
    per 10.10.5.2.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 18 - SteelICompStrgth-FlxShrNeg

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2539 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Page 2540 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If positive moment set to zero. Reported only for Class 1 and 2 sections.

    Field: MrNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for negative bending. Reported only for Class 1 and 2
    sections.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress due to demand at the section cut. Reported only for
    Class 3 sections, otherwise set to zero.

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for negative moment. Reported
    only for Class 3 sections, otherwise set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress due to demand at the section cut. Reported only for Class 3
    sections, otherwise set to zero.

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for negative moment. Reported only for
    Class 3 sections, otherwise set to zero.

    Page 2541 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: WebTField
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Whether or not the webs depend on tension field to carry shear, i.e. is h/w>502sqrt(kv/Fy)
    per 10.10.5.2.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 19 - SteelICompServ-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2542 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFMM+
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M+ regions.

    Field: LLDFMMField is Imported: No


    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment in M- regions.

    Field: LLDFVM+
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear in M+ regions.
    Page 2543 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFVMField is Imported: No


    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear in M- regions.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ASlabEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of the concrete composite slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the composite slab.

    Page 2544 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Long-term Modular Ratio.

    Field: ARebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fyLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam area.

    Page 2545 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether the beam is rolled section or not.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange design yield strength fyd.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange thickness.

    Page 2546 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange design yield strength fyd.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web design yield strength fyd.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Page 2547 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.
    Table: Bridge Super Design CANCSAS606 20 - SteelICompServ-FlxPos

    Page 2548 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Page 2549 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. Reported only when design request parameter
    "Use Stage Analysis?" is set to No.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No.

    Page 2550 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SigEDSerTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress at the section cut.

    Field: SigEDSerBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress at the section cut.

    Field: fyTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of top compression flange for positive moment.

    Field: fyBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of bottom tension flange for positive moment.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 21 - SteelICompServ-FlxNeg

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.
    Page 2551 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2552 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. Reported only when design request parameter
    "Use Stage Analysis?" is set to No.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No.

    Field: SigEDSerTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress at the section cut.

    Field: SigEDSerBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compresssion stress at the section cut.

    Page 2553 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fyTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of top tension flange for negative moment.

    Field: fyBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of bottom compression flange for negative moment.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 22 - SteelICompCstrStg-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.
    Page 2554 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: SecClsNCPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of non-composite section for positive bending.

    Field: SecClsNCNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of non-composite section for negative bending.

    Field: SectClsPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for positive bending.

    Field: SectClsNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for negative bending.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.
    Page 2555 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ASlabEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of the concrete composite slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the composite slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Long-term Modular Ratio.

    Field: ARebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Page 2556 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ARebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fyLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Page 2557 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether the beam is rolled section or not.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange design yield strength fyd.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange design yield strength fyd.

    Page 2558 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web design yield strength fyd.

    Field: DcWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for positive moment.

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the negative plastic moment.

    Page 2559 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AeWebPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web for positive moment.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Page 2560 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Page 2561 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Field: DiaphDwnSta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Section cut index of nearest downstation diaphragm or rigid support.

    Field: DiaphUpSta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Section cut index of nearest upstation diaphragm or rigid support.

    Field: BetaXPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient of monosymmetry for positive moment.

    Page 2562 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BetaXNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient of monosymmetry for negative moment.

    Field: Cw
    Field is Imported: No
    Format: Length6 (Section Dimensions section of form)
    Units: Length6
    Warping torsional constant.

    Field: B1Pos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Geometric coefficient for laterally unsuported monosymmetric I beam per 10.10.2.3 for
    positive bending.

    Field: B1Neg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Geometric coefficient for laterally unsuported monosymmetric I beam per 10.10.2.3 for
    negative bending.

    Field: B2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Geometric coefficient for laterally unsuported monosymmetric I beam per 10.10.2.3.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.
    Table: Bridge Super Design CANCSAS606 23 - SteelICompCstrStg-FlxPos

    Page 2563 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Page 2564 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If negative moment set to zero.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder. Considered only when design request parameter "Use Stage
    Analysis?" is set to Yes.

    Page 2565 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. For staged design request when
    SlabStatus=Comp value set to 0.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. For staged design request when
    SlabStatus=Comp value set to 0.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. For staged design request when
    SlabStatus=Comp value set to 0.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to demand at the section cut. Reported only for Class 3
    non comopsite sections.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to demand at the section cut. Reported only for Class 3
    non comopsite sections.

    Field: MDiaphDown
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest downstation diaphragm or rigid support.

    Page 2566 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MDiaphUp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest upstation diaphragm or rigid support. Set to zero if sign is
    different from demand moment on downstation diaphragm.

    Field: kappa
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of smaller factored moment to the larger factored moments at opposite ends of an
    ubraced length per 10.10.2.3. Calculated only when option "Program determined" for
    omega2 is selected.

    Field: omega2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient to account for increased moment resistance of a laterally unsuported beam
    segment when subject to moment gradient per 10.10.2.3.

    Field: MuCritElast
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Critical elastic moment per 10.10.2.3.

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for positive bending. Reported only for Class 1, 2
    composite and non-composite sections and Class 3 composite sections otherwise set to
    zero.

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for positive moment. Reported
    only for Class 3 non composite sections, otherwise set to zero.

    Page 2567 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for positive moment. Reported only for
    Class 3 non composite sections, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 24 - SteelICompCstrStg-FlxNeg

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2568 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Page 2569 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If positive moment set to zero.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder. Considered only when design request parameter "Use Stage
    Analysis?" is set to Yes.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. For staged design request when
    SlabStatus=Comp value set to 0.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. For staged design request when
    SlabStatus=Comp value set to 0.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. For staged design request when
    SlabStatus=Comp value set to 0.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress due to demand at the section cut. Reported only for
    Class 3 sections.

    Page 2570 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress due to demand at the section cut. Reported only for Class 3
    sections.

    Field: fRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tension stress at top most rebar at the section cut. Reported only for Class 3 composite
    sections, otherwise set to zero.

    Field: MDiaphDown
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest downstation diaphragm or rigid support.

    Field: MDiaphUp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest upstation diaphragm or rigid support. Set to zero if sign is
    different from demand moment on downstation diaphragm.

    Field: kappa
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of smaller factored moment to the larger factored moments at opposite ends of an
    ubraced length per 10.10.2.3. Calculated only when option "Program determined" for
    omega2 is selected.

    Field: omega2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient to account for increased moment resistance of a laterally unsuported beam
    segment when subject to moment gradient per 10.10.2.3.

    Page 2571 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuCritElast
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Critical elastic moment per 10.10.2.3.

    Field: MrNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for negative bending. Reported only for Class 1 and 2
    sections, otherwise set to zero.

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for negative moment. Reported
    only for Class 3 sections, otherwise set to zero.

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for negative moment. Reported only for
    Class 3 sections, otherwise set to zero.

    Field: fyLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum yield strength of longitudinal rebar.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 25 - SteelICompCstrStg-Shear

    Page 2572 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Page 2573 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: a
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Page 2574 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kv
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coeffitient per 10.10.5.1.

    Field: fcr
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: ft
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 26 - SteelICompCstrStg-FlxShrPos

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2575 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Page 2576 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If negative moment set to zero. Reported only for Class 1 and 2
    sections.

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for positive bending.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to demand at the section cut. Reported only for Class 3
    sections when slab status is non-composite, otherwise set to zero.

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for positive bending. Reported
    only for Class 3 sections when slab status is non-composite, otherwise set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to demand at the section cut. Reported only for Class 3
    sections when slab status is non-composite, otherwise set to zero.

    Page 2577 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for positive bending. Reported only for
    Class 3 sections when slab status is non-composite, otherwise set to zero.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: WebTField
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Whether or not the webs depend on tension field to carry shear, i.e. is h/w>502sqrt(kv/Fy)
    per 10.10.5.2.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 27 - SteelICompCstrStg-FlxShrNeg

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2578 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Page 2579 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If positive moment set to zero. Reported only for Class 1 and 2 sections.

    Field: MrNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for negative bending. Reported only for Class 1 and 2
    sections.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress due to demand at the section cut. Reported only for
    Class 3 sections, otherwise set to zero.

    Page 2580 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for negative moment. Reported
    only for Class 3 sections, otherwise set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress due to demand at the section cut. Reported only for Class 3
    sections, otherwise set to zero.

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for negative moment. Reported only for
    Class 3 sections, otherwise set to zero.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: WebTField
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Whether or not the webs depend on tension field to carry shear, i.e. is h/w>502sqrt(kv/Fy)
    per 10.10.5.2.

    Page 2581 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 28 - SteelICompCstrNStg-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Page 2582 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: SecClsNCPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of non-composite section for positive bending.

    Field: SecClsNCNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of non-composite section for negative bending.

    Field: SectClsPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for positive bending.

    Field: SectClsNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for negative bending.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ASlabEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of the composite slab.
    Page 2583 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of the concrete composite slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the composite slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Long-term Modular Ratio.

    Field: ARebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Page 2584 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: YRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fyLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether the beam is rolled section or not.

    Page 2585 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange design yield strength fyd.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange design yield strength fyd.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Page 2586 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web design yield strength fyd.

    Field: DcWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for positive moment.

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the negative plastic moment.

    Field: AeWebPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web for positive moment.

    Page 2587 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Page 2588 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Page 2589 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Field: DiaphDwnSta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Section cut index of nearest downstation diaphragm or rigid support.

    Field: DiaphUpSta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Section cut index of nearest upstation diaphragm or rigid support.

    Field: BetaXPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient of monosymmetry for positive moment.

    Field: BetaXNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient of monosymmetry for negative moment.

    Page 2590 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Cw
    Field is Imported: No
    Format: Length6 (Section Dimensions section of form)
    Units: Length6
    Warping torsional constant.

    Field: B1Pos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Geometric coefficient for laterally unsuported monosymmetric I beam per 10.10.2.3 for
    positive bending.

    Field: B1Neg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Geometric coefficient for laterally unsuported monosymmetric I beam per 10.10.2.3 for
    negative bending.

    Field: B2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Geometric coefficient for laterally unsuported monosymmetric I beam per 10.10.2.3.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.
    Table: Bridge Super Design CANCSAS606 29 - SteelICompCstrNStg-FlxPos

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2591 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Page 2592 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If negative moment set to zero.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder. Considered only when design request parameter "Use Stage
    Analysis?" is set to Yes.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. For staged design request when
    SlabStatus=Comp value set to 0.

    Page 2593 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. For staged design request when
    SlabStatus=Comp value set to 0.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. For staged design request when
    SlabStatus=Comp value set to 0.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to demand at the section cut. Reported only for Class 3
    non comopsite sections.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to demand at the section cut. Reported only for Class 3
    non comopsite sections.

    Field: MDiaphDown
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest downstation diaphragm or rigid support.

    Field: MDiaphUp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest upstation diaphragm or rigid support. Set to zero if sign is
    different from demand moment on downstation diaphragm.

    Page 2594 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kappa
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of smaller factored moment to the larger factored moments at opposite ends of an
    ubraced length per 10.10.2.3. Calculated only when option "Program determined" for
    omega2 is selected.

    Field: omega2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient to account for increased moment resistance of a laterally unsuported beam
    segment when subject to moment gradient per 10.10.2.3.

    Field: MuCritElast
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Critical elastic moment per 10.10.2.3.

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for positive bending. Reported only for Class 1, 2
    composite and non-composite sections and Class 3 composite sections otherwise set to
    zero.

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for positive moment. Reported
    only for Class 3 non composite sections, otherwise set to zero.

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for positive moment. Reported only for
    Class 3 non composite sections, otherwise set to zero.

    Page 2595 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 30 - SteelICompCstrNStg-FlxNeg

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.
    Page 2596 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If positive moment set to zero.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder. Considered only when design request parameter "Use Stage
    Analysis?" is set to Yes.
    Page 2597 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. For staged design request when
    SlabStatus=Comp value set to 0.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. For staged design request when
    SlabStatus=Comp value set to 0.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. For staged design request when
    SlabStatus=Comp value set to 0.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress due to demand at the section cut. Reported only for
    Class 3 sections.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress due to demand at the section cut. Reported only for Class 3
    sections.

    Field: fRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tension stress at top most rebar at the section cut. Reported only for Class 3 composite
    sections, otherwise set to zero.

    Page 2598 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MDiaphDown
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest downstation diaphragm or rigid support.

    Field: MDiaphUp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest upstation diaphragm or rigid support. Set to zero if sign is
    different from demand moment on downstation diaphragm.

    Field: kappa
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of smaller factored moment to the larger factored moments at opposite ends of an
    ubraced length per 10.10.2.3. Calculated only when option "Program determined" for
    omega2 is selected.

    Field: omega2
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient to account for increased moment resistance of a laterally unsuported beam
    segment when subject to moment gradient per 10.10.2.3.

    Field: MuCritElast
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Critical elastic moment per 10.10.2.3.

    Field: MrNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for negative bending. Reported only for Class 1 and 2
    sections, otherwise set to zero.

    Page 2599 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for negative moment. Reported
    only for Class 3 sections, otherwise set to zero.

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for negative moment. Reported only for
    Class 3 sections, otherwise set to zero.

    Field: fyLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum yield strength of longitudinal rebar.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 31 - SteelICompCstrNStg-Shear

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2600 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2601 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: a
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: kv
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coeffitient per 10.10.5.1.

    Field: fcr
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Page 2602 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ft
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    .

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 32 - SteelICompCstrNStg-FlxShrPos

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2603 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If negative moment set to zero. Reported only for Class 1 and 2
    sections.
    Page 2604 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for positive bending.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to demand at the section cut. Reported only for Class 3
    sections when slab status is non-composite, otherwise set to zero.

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for positive bending. Reported
    only for Class 3 sections when slab status is non-composite, otherwise set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to demand at the section cut. Reported only for Class 3
    sections when slab status is non-composite, otherwise set to zero.

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for positive bending. Reported only for
    Class 3 sections when slab status is non-composite, otherwise set to zero.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Page 2605 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: WebTField
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Whether or not the webs depend on tension field to carry shear, i.e. is h/w>502sqrt(kv/Fy)
    per 10.10.5.2.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design CANCSAS606 33 - SteelICompCstrNStg-FlxShrNeg

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2606 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Page 2607 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If positive moment set to zero. Reported only for Class 1 and 2 sections.

    Field: MrNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for negative bending. Reported only for Class 1 and 2
    sections.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange compression stress due to demand at the section cut. Reported only for
    Class 3 sections, otherwise set to zero.

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for negative moment. Reported
    only for Class 3 sections, otherwise set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange tension stress due to demand at the section cut. Reported only for Class 3
    sections, otherwise set to zero.

    Page 2608 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for negative moment. Reported only for
    Class 3 sections, otherwise set to zero.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: WebTField
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Whether or not the webs depend on tension field to carry shear, i.e. is h/w>502sqrt(kv/Fy)
    per 10.10.5.2.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 01 - CBoxStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2609 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for the bridge section.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Page 2610 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.
    Page 2611 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design EUROCODE 02 - CBoxShear-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2612 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LDFV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Portion of total demand shear assummed to be carried by the web.

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section NEd and Vp to obtain girder NEd and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: DuctFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor that was used to multiply PT duct diameter when evaluating nominal web thickness
    per 6.2.3 (6).

    Field: WebWidthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective girder web width per 6.2.3.(6).

    Field: Ak
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area enclosed by shear flow path, including the area of holes, if any.

    Field: fckConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Characteristic compressive strength of concrete.
    Page 2613 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GammaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: fcdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of concrete.

    Field: fctdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design tensile strength of concrete.

    Field: FactAplhaL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor for transmission length of PT, used in shear resistance equation 6.4. Typical values
    1.0 for post-tensioning.

    Field: fykVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Characteristic yield strength of vertical shear rebar.

    Field: GammaS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcement.

    Field: fydVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of vertical shear rebar.
    Page 2614 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fydLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of longitudinal rebar.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle between the concrete compression strut and the beam axis perpendicular to the
    shear force.

    Field: FlagPTPrsn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Presence of PT.

    Field: GirderIxx
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Girder moment of inertia about horizontal centroidal axis.

    Field: 1stAMomTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Girder first moment of area above and about horizontal centroidal axis.
    Table: Bridge Super Design EUROCODE 03 - CBoxShear-Result

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2615 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Page 2616 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlDCRatV
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the ratio of Ved over Vrdmax (rVedVrdmax).

    Field: CtrlDCRatT
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the ratio of Ted over Trdmax combined with Ved over
    Vrdmax (RatioTandV).

    Field: CtrlAsVperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of transverse shear rebar (AsVperL).

    Field: CtrlAsLBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the bottom slab.

    Field: CtrlAsLTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the top slab.

    Field: CtrlAt
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of closed transverse torsion reinforcement
    (AstwPerL).

    Page 2617 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlAtLong
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal torsion reinforcement (Astl).

    Field: Ved
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Ultimate design shear force resulting from external loading and prestressing.

    Field: Ned
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Ultimate demand axial force resulting from external loading and prestressing (positive if
    tensile).

    Field: Med
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Ultimate demand moment resulting from external loading.

    Field: Ted
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Ultimate demand torsion moment resulting from external loading.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of all of the effective prestressing forces.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth of the cross section.
    Page 2618 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: InrLeverArm
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Inner lever arm z.

    Field: SigmaCP
    Field is Imported: No
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    Concrete stress at the centroidal axis due to axial load and/or prestressing. Positive if
    compressive.

    Field: VrdcType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Vrdc derived based on region Reinforced, Prestressed Single Span Cracked or Prestressed
    Continuous or Uncracked.

    Field: Vrdc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design shear resistance of the girder without shear reinforcement.

    Field: RatVedVrdc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ved over Vrdc.

    Field: rho1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longitudinal reinforcement/ PT ratio used in formula 6.2.a.

    Page 2619 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: k1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: Crdc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: RatfyDesFyk
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear rebar design stress over shear rebar characteristic yield strength fyk.

    Field: nu1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor for concrete cracked in shear.

    Field: AlphaCW
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coeff taking account of the state of the stress in the compression chord.

    Field: Vrdmax
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design value of maximum shear force limited by crushing of the compression struts.

    Page 2620 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: rVedVrdmax
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ved over Vrdmax.

    Field: RatioTandV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ted over Trdmax combined with Ved over Vrdmax.

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Pass or Fail.

    Field: AswPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of vertical shear reinforcement per unit length.

    Field: AswFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controlling flag for AsVPerL.

    Field: rhoWMin
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Minimum shear reinforcement ratio per 9.5N.

    Field: AslTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the top slab due to shear.

    Page 2621 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AslBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the bottom slab due to shear.

    Field: AstwPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse torsion reinforcement per unit length for each outer and inner
    link leg.

    Field: AstlPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of longitudinal torsion reinforcement per unit length for each outer and
    inner layer.
    Table: Bridge Super Design EUROCODE 04 - CBoxFlexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2622 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive factored moment resistance for the girder.

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment demand for the girder.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative factored moment resistance for the girder.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment demand for the girder.

    Page 2623 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Field: DepthSect
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the section.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: ASlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the top slab.

    Field: EqThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the top slab for the bridge section at this station.
    Page 2624 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the top slab.

    Field: SumWebWdth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Sum of web widths.

    Field: ASlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the bottom slab.

    Field: EqThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the bottom slab for the bridge section at this station.

    Field: WSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the bottom slab.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of reinforcement bars that are located above the bottom compression zone. Tension
    reinforcement used to calculate MrNeg.

    Page 2625 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of reinforcemnet bars that are located below the top compression zone. Tension
    reinforcement used to calculate MrPos.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of prestress tendons that are located above the bottom compression zone. Used to
    calculate MrNeg.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of prestress tendons that are located below the top compression zone. Used to
    calculate MrPos.

    Field: AlphaCC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient taking account of long term effects on the compressive strength and of
    unfavourable effects resulting from the way the load is applied.

    Field: GammaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: fcd
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value of concrete compressive strength.

    Page 2626 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactEta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the concrete effective strength in compression.

    Field: FactLambda
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the effective height of the compression zone.

    Field: EpsCU3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ultimate compressive strain in the concrete.

    Field: GammaRebar
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: fydLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of longitudinal rebar.

    Field: GammaPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: fpd
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value for the prestressing steel stress. (average).

    Page 2627 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PrestrainPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Prestrain in tendon due to prestressing force (average).

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: xDistForPos
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    x - distance between the neutral axis and the compressive face for positive moment.

    Field: xDistForNeg
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    x - distance between the neutral axis and the compressive face for negative moment.

    Field: xLamdaPos
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Compression block depth for positive moment.

    Field: xLambdaNeg
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Compression block depth for negative moment.

    Page 2628 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: xLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of compression block for positive moment N/A=-1; Within Flange = 1; Into Web
    = 2; At Web End = 3; No Convergence = 4; Overreinforced =5.

    Field: xLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of compression block for negative moment N/A=-1; Within Flange = 1; Into Web
    = 2; At Web End = 3; No Convergence = 4; Overreinforced =5.

    Field: ForceRebTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in reinforcement bars that are located above the bottom compression zone. Used to
    calculate MrNeg.

    Field: ForceRebBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in reinforcement bars that are located below the top compression zone. Used to
    calculate MrPos.

    Field: ForcePTTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in tendons that are located above the bottom compression zone. Used to calculate
    MrNeg.

    Field: ForcePTBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in tendons that are located below the top compression zone. Used to calculate
    MrPos.

    Page 2629 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ForceConTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in concrete compression block for positive moment.

    Field: ForceConBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in concrete compression block for negative moment.
    Table: Bridge Super Design EUROCODE 05 - CBox2Stress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2630 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this GirderPart.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.
    Page 2631 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design EUROCODE 06 - CBox2Shear-Prop
    Page 2632 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear regions.

    Field: LLDFM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment regions.

    Page 2633 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section NEd and Vp to obtain girder NEd and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: DuctFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor that was used to multiply PT duct diameter when evaluating nominal web thickness
    per 6.2.3 (6).

    Field: WebWidthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective girder web width per 6.2.3.(6).

    Field: fckConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Characteristic compressive strength of concrete.

    Field: GammaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: fcdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of concrete.
    Page 2634 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fctdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design tensile strength of concrete.

    Field: FactAplhaL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor for transmission length of PT, used in shear resistance equation 6.4. Typical values
    1.0 for post-tensioning.

    Field: fykVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Characteristic yield strength of vertical shear rebar.

    Field: GammaS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcement.

    Field: fydVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of vertical shear rebar.

    Field: fydLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of longitudinal rebar.

    Page 2635 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle between the concrete compression strut and the beam axis perpendicular to the
    shear force.

    Field: FlagPTPrsn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Presence of PT.

    Field: GirderIxx
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Girder moment of inertia about horizontal centroidal axis.

    Field: 1stAMomTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Girder first moment of area above and about horizontal centroidal axis.
    Table: Bridge Super Design EUROCODE 07 - CBox2Shear-Result

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2636 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the ratio of Ved over Vrdmax.

    Page 2637 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlAsVperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of transverse shear rebar (AsVperL).

    Field: CtrlAsLBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the bottom slab.

    Field: CtrlAsLTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the top slab.

    Field: Ved
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Ultimate design shear force resulting from external loading and prestressing.

    Field: Ned
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Ultimate demand axial force resulting from external loading and prestressing (positive if
    tensile).

    Field: Med
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Ultimate demand moment resulting from external loading.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of all of the effective prestressing forces.
    Page 2638 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth of the cross section.

    Field: InrLeverArm
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Inner lever arm z.

    Field: SigmaCP
    Field is Imported: No
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    Concrete stress at the centroidal axis due to axial load and/or prestressing. Positive if
    compressive.

    Field: VrdcType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Vrdc derived based on region Reinforced, Prestressed Single Span Cracked or Prestressed
    Continuous or Uncracked.

    Field: Vrdc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design shear resistance of the girder without shear reinforcement.

    Field: RatVedVrdc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ved over Vrdc.

    Page 2639 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: rho1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longitudinal reinforcement/ PT ratio used in formula 6.2.a.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: k1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: Crdc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: RatfyDesFyk
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear rebar design stress over shear rebar characteristic yield strength fyk.

    Field: nu1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor for concrete cracked in shear.

    Field: AlphaCW
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coeff taking account of the state of the stress in the compression chord.

    Page 2640 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vrdmax
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design value of maximum shear force limited by crushing of the compression struts.

    Field: rVedVrdmax
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ved over Vrdmax.

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Pass or Fail.

    Field: AswPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of vertical shear reinforcement per unit length.

    Field: AswFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controlling flag for AsVPerL.

    Field: rhoWMin
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Minimum shear reinforcement ratio per 9.5N.

    Field: AslTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the top slab due to shear.

    Page 2641 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AslBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the bottom slab due to shear.
    Table: Bridge Super Design EUROCODE 08 - CBox2Flexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive factored moment resistance for the girder.
    Page 2642 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment demand for the girder.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative factored moment resistance for the girder.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment demand for the girder.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Page 2643 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: EqThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the top slab for the bridge section at this station.

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.
    Page 2644 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Field: EqThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the bottom slab for the bridge section at this station.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of reinforcement bars that are located above the bottom compression zone. Tension
    reinforcement used to calculate MrNeg.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of reinforcemnet bars that are located below the top compression zone. Tension
    reinforcement used to calculate MrPos.

    Page 2645 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of prestress tendons that are located above the bottom compression zone. Used to
    calculate MrNeg.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of prestress tendons that are located below the top compression zone. Used to
    calculate MrPos.

    Field: AlphaCC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient taking account of long term effects on the compressive strength and of
    unfavourable effects resulting from the way the load is applied.

    Field: GammaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: fcdGirder
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value of concrete compressive strength of the girder.

    Field: FactEta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the concrete effective strength in compression.

    Page 2646 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactLambda
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the effective height of the compression zone.

    Field: EpsCU3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ultimate compressive strain in the concrete.

    Field: GammaRebar
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: fydLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of longitudinal rebar.

    Field: GammaPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: fpd
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value for the prestressing steel stress. (average).

    Field: PrestrainPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Prestrain in tendon due to prestressing force (average).

    Page 2647 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: xDistForPos
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    x - distance between the neutral axis and the compressive face for positive moment.

    Field: xDistForNeg
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    x - distance between the neutral axis and the compressive face for negative moment.

    Field: xLamdaPos
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Compression block depth for positive moment.

    Field: xLambdaNeg
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Compression block depth for negative moment.

    Field: xLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of compression block for positive moment N/A=-1; Within Flange = 1; Into Web
    = 2; At Web End = 3; No Convergence = 4; Overreinforced =5.
    Page 2648 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: xLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of compression block for negative moment N/A=-1; Within Flange = 1; Into Web
    = 2; At Web End = 3; No Convergence = 4; Overreinforced =5.

    Field: ForceRebTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in reinforcement bars that are located above the bottom compression zone. Used to
    calculate MrNeg.

    Field: ForceRebBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in reinforcement bars that are located below the top compression zone. Used to
    calculate MrPos.

    Field: ForcePTTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in tendons that are located above the bottom compression zone. Used to calculate
    MrNeg.

    Field: ForcePTBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in tendons that are located below the top compression zone. Used to calculate
    MrPos.

    Field: ForceConTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in concrete compression block for positive moment.

    Page 2649 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ForceConBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in concrete compression block for negative moment.
    Table: Bridge Super Design EUROCODE 09 - PCCompStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: GirderPart
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Slab or Beam.
    Page 2650 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this GirderPart.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.
    Page 2651 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design EUROCODE 10 - PCCompShear-Prop
    Page 2652 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear regions.

    Field: LLDFM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment regions.

    Page 2653 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section NEd and Vp to obtain girder NEd and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: fckConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Characteristic compressive strength of concrete.

    Field: GammaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: fcdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of concrete.

    Field: fctdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design tensile strength of concrete.

    Field: FactAplhaL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor for transmission length of PT, used in shear resistance equation 6.4. Typical values
    1.0 for post-tensioning.
    Page 2654 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fykVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Characteristic yield strength of vertical shear rebar.

    Field: GammaS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcement.

    Field: fydVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of vertical shear rebar.

    Field: fydLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of longitudinal rebar.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle between the concrete compression strut and the beam axis perpendicular to the
    shear force.

    Field: FlagPTPrsn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Presence of PT.

    Field: GirderIxx
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Girder moment of inertia about horizontal centroidal axis.
    Page 2655 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: 1stAMomTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Girder first moment of area above and about horizontal centroidal axis.
    Table: Bridge Super Design EUROCODE 11 - PCCompShear-Result

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.
    Page 2656 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the ratio of Ved over Vrdmax.

    Field: CtrlAsVperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of transverse shear rebar (AsVperL).

    Field: CtrlAsLBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the bottom slab.

    Field: CtrlAsLTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the top slab.

    Field: Ved
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Ultimate design shear force resulting from external loading and prestressing.

    Page 2657 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ned
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Ultimate demand axial force resulting from external loading and prestressing (positive if
    tensile).

    Field: Med
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Ultimate demand moment resulting from external loading.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of all of the effective prestressing forces.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth of the cross section.

    Field: InrLeverArm
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Inner lever arm z.

    Field: SigmaCP
    Field is Imported: No
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    Concrete stress at the centroidal axis due to axial load and/or prestressing. Positive if
    compressive.

    Page 2658 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VrdcType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Vrdc derived based on region Reinforced, Prestressed Single Span Cracked or Prestressed
    Continuous or Uncracked.

    Field: Vrdc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design shear resistance of the girder without shear reinforcement.

    Field: RatVedVrdc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ved over Vrdc.

    Field: rho1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longitudinal reinforcement/ PT ratio used in formula 6.2.a.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: k1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: Crdc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.
    Page 2659 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RatfyDesFyk
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear rebar design stress over shear rebar characteristic yield strength fyk.

    Field: nu1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor for concrete cracked in shear.

    Field: AlphaCW
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coeff taking account of the state of the stress in the compression chord.

    Field: Vrdmax
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design value of maximum shear force limited by crushing of the compression struts.

    Field: rVedVrdmax
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ved over Vrdmax.

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Pass or Fail.

    Field: AswPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of vertical shear reinforcement per unit length.

    Page 2660 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AswFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controlling flag for AsVPerL.

    Field: rhoWMin
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Minimum shear reinforcement ratio per 9.5N.

    Field: AslTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the top slab due to shear.

    Field: AslBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the bottom slab due to shear.
    Table: Bridge Super Design EUROCODE 12 - PCCompFlexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2661 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive factored moment resistance for the girder.

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment demand for the girder.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative factored moment resistance for the girder.

    Page 2662 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment demand for the girder.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.
    Page 2663 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabTrib
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Tributary width of the composite slab.

    Field: ThBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of beam top flange.

    Field: WBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of beam top flange.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: WebHeight
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Height of the beam web.

    Page 2664 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of beam bottom flange.

    Field: WBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of beam bottom flange.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of reinforcement bars that are located above the bottom compression zone. Tension
    reinforcement used to calculate MrNeg.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of reinforcemnet bars that are located below the top compression zone. Tension
    reinforcement used to calculate MrPos.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of prestress tendons that are located above the bottom compression zone. Used to
    calculate MrNeg.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of prestress tendons that are located below the top compression zone. Used to
    calculate MrPos.

    Page 2665 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaCC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient taking account of long term effects on the compressive strength and of
    unfavourable effects resulting from the way the load is applied.

    Field: GammaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: fcdBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value of concrete compressive strength of the girder.

    Field: FactEtaB
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the girder concrete effective strength in compression.

    Field: FactLambdaB
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the effective height of the compression zone based on the girder concrete.

    Field: EpsCU3B
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ultimate compressive strain in the girder concrete.

    Field: fcdSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value of concrete compressive strength of the composite slab.
    Page 2666 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactEtaS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the composite slab concrete effective strength in compression.

    Field: FactLambdaS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the effective height of the compression zone based on the composite slab
    concrete.

    Field: EpsCU3S
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ultimate compressive strain in the composite slab concrete.

    Field: GammaRebar
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: fydLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of longitudinal rebar.

    Field: GammaPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: fpd
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value for the prestressing steel stress. (average).
    Page 2667 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PrestrainPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Prestrain in tendon due to prestressing force (average).

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: xDistForPos
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    x - distance between the neutral axis and the compressive face for positive moment.

    Field: xDistForNeg
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    x - distance between the neutral axis and the compressive face for negative moment.

    Field: xLamdaPos
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Compression block depth for positive moment.

    Field: xLambdaNeg
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Compression block depth for negative moment.

    Page 2668 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: xLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of compression block for positive moment N/A=-1; Within Flange = 1; Into Web
    = 2; At Web End = 3; No Convergence = 4; Overreinforced =5.

    Field: xLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of compression block for negative moment N/A=-1; Within Flange = 1; Into Web
    = 2; At Web End = 3; No Convergence = 4; Overreinforced =5.

    Field: ForceRebTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in reinforcement bars that are located above the bottom compression zone. Used to
    calculate MrNeg.

    Field: ForceRebBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in reinforcement bars that are located below the top compression zone. Used to
    calculate MrPos.

    Field: ForcePTTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in tendons that are located above the bottom compression zone. Used to calculate
    MrNeg.

    Field: ForcePTBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in tendons that are located below the top compression zone. Used to calculate
    MrPos.

    Page 2669 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ForceConTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in concrete compression block for positive moment.

    Field: ForceConBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in concrete compression block for negative moment.
    Table: Bridge Super Design EUROCODE 13 - SteelICompUltimate-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2670 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: SectClsPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for positive bending.

    Field: SectClsNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for negative bending.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ASlabEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of the composite slab.
    Page 2671 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcdSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of the concrete composite slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the composite slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Long-term Modular Ratio.

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Page 2672 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam area.

    Field: AeBeamPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam effective area for positive moment.

    Field: AeBeamNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam effective area for negative moment.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the beam.

    Page 2673 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: IxeBeamPos
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam effective moment of inertia about horizontal centroidal axis for positive moment.

    Field: IxeBeamNeg
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam effective moment of inertia about horizontal centroidal axis for negative moment.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether the beam is rolled section or not.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fydFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange design yield strength fyd.

    Page 2674 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AeFlgTopNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of top flange for negative moment.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange width.

    Field: fydFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange design yield strength fyd.

    Field: AeFlgBotPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of bottom flange for positive moment.

    Field: AeFlgBotNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of bottom flange for negative moment.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Page 2675 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fydWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web design yield strength fyd.

    Field: DcWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for positive moment.

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the negative plastic moment.

    Field: AeWebPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web for positive moment.

    Page 2676 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AeWebNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web for negative moment.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxeStlBotPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at bottom fiber for positive bending.

    Field: SxeStlBotNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at bottom fiber for negative bending.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxeStlTopPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at top fiber for positive bending.

    Field: SxeStlTopNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at top fiber for negative bending.

    Page 2677 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.

    Field: SxeLTermBPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed long term section for positive
    moment at bottom of steel beam.

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxeLTermTPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed long term section for positive
    moment at top of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxeSTermBPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed short term section for positive
    moment at bottom of steel beam.

    Page 2678 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxeSTermTPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed short term section for positive
    moment at top of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxeCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed section for negative moment at
    bottom of steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: SxeCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed section for negative moment at top
    of steel beam.

    Page 2679 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Field: PNADistBeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reduction factor beta for positive plastic moment capacity per EN 1994-2; 6.2.1.2 (2).

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Page 2680 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for positive moment.

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section controlling yield moment capacity for negative moment.

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the bottom flange.

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the top flange.

    Field: ImpAlphaLT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Imperfection factor alpha LT per EN 1993-1-1 Table 6.3.

    Field: DiaphDwnSta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Section cut index of nearest downstation diaphragm or rigid support.
    Page 2681 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DiaphUpSta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Section cut index of nearest upstation diaphragm or rigid support.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.
    Table: Bridge Super Design EUROCODE 14 - SteelICompUltimate-FlxPos

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2682 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If negative moment is set to zero. Reported only for Class 1 and 2
    sections, otherwise set to zero.

    Page 2683 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for positive bending. Reported only for Class 1 and 2
    sections.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder. Considered only when design request parameter "Use Stage
    Analysis?" is set to Yes, otherwise set to zero.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. Reported only when design request parameter
    "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to demand at the section cut. Reported only for Class 3
    and 4 sections, otherwise set to zero.

    Page 2684 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to demand at the section cut. Reported only for Class 3
    and 4 sections, otherwise set to zero.

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress at top of composite slab. Reported only for Class 3 and 4 sections, otherwise set to
    zero.

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for positive moment. Reported
    only for Class 3 and 4 sections, otherwise set to zero.

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for positive moment. Reported only for
    Class 3 and 4 sections, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 15 - SteelICompUltimate-FlxNeg

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2685 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Page 2686 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If positive moment is set to zero. Reported only for Class 1 and 2
    sections, otherwise set to zero.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder. Considered only when design request parameter "Use Stage
    Analysis?" is set to Yes, otherwise set to zero.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. Reported only when design request parameter
    "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No, otherwise set to zero.

    Page 2687 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to demand at the section cut. Reported only for Class 3
    and 4 sections, otherwise set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to demand at the section cut. Reported only for Class 3
    and 4 sections, otherwise set to zero.

    Field: MDiaphDown
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest downstation diaphragm or rigid support.

    Field: MDiaphUp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest upstation diaphragm or rigid support. Set to zero if sign is
    different from demand moment on downstation diaphragm.

    Field: VDiaphDown
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand at nearest downstation diaphragm or rigid support.

    Page 2688 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RatioMiu
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear demand ratio miu for segment of beam between rigid lateral supports per EN 1993-2
    6.3.4.2 (7).

    Field: FactPhi
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor Phi for segment of beam between rigid lateral supports per EN 1993-2 6.3.4.2 (7).

    Field: FactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor m for segment of beam between rigid lateral supports per EN 1993-2 6.3.4.2 (7)
    (assuming gamma=0).

    Field: LambdaLT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness for torsional-flexural buckling per EN 1993-2 eq 6.10 and eq. 6.12.

    Field: FactPhiLT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor PhiLT for lateral-torsional buckling per EN 1993-1-1 eq 6.56.

    Field: FactChiLT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reduction factor ChiLT for lateral-torsional buckling per EN 1993-1-1 eq 6.56.

    Page 2689 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MrNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for negative bending. Reported only for Class 1 and 2
    sections, otherwise set to zero.

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for negative moment. Reported
    only for Class 3 and 4 sections, otherwise set to zero.

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for negative moment. Reported only for
    Class 3 and 4 sections, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 16 - SteelICompUltimate-Shear

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2690 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2691 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: EndPostType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    End support clasiffication per EN 1993-1-5 Figure 5.1.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: Vrd
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design shear resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design plastic shear resistance.

    Field: a
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: eta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor per EN 1993-1-5 5.1.2 Note 2.

    Page 2692 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kTau
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Minimum shear buckling coefficient for the web panel per EN 1993-1-5 A.3.

    Field: Lamdaw
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness parameter per EN 1993-1-5 5.3 Note 2.

    Field: Chiw
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor for contribution of the web to the shear buckling resistance per EN 1993-1-5 table
    5.1.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 17 - SteelICompUltimate-FlxShrPos

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2693 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2694 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If negative moment set to zero. Reported only for Class 1 and 2
    sections, otherwise set to zero.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: rho
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reduction factor for web fyd per EN 1994-2 6.2.2.4 (eq 6.5). Reported only for Class 1
    and 2 sections, otherwise set to zero.

    Field: MplRdPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the composite section.

    Field: MplRdPosRed
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the composite section taking into account
    the influence of vertical shear on to the resistance to bending. Reported only for Class 1
    and 2 sections, otherwise set to zero.

    Page 2695 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Eta1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment usage factor per EN 1993-1-5 (eq.7.1). Reported only for Class 3 and 4 sections,
    otherwise set to zero.

    Field: Eta3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear usage factor per EN 1993-1-5 (eq.7.1). Reported only for Class 3 and 4 sections,
    otherwise set to zero.

    Field: MfRd
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the composite section excluding the steel
    web.

    Field: MplRdPosEff
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the effective area of the composite section.
    Reported only for Class 4 sections, otherwise set to zero.

    Field: MfRdPosEff
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the effective area of the composite section
    excluding the steel web. Reported only for Class 4 sections, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 18 - SteelICompUltimate-FlxShrNeg

    Page 2696 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Page 2697 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If positive moment set to zero. Reported only for Class 1 and 2
    sections, otherwise set to zero.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: rho
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reduction factor for web fyd per EN 1994-2 6.2.2.4 (eq 6.5). Reported only for Class 1
    and 2 sections, otherwise set to zero.

    Page 2698 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MplRdNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the composite section.

    Field: MplRdNegRed
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the composite section taking into account
    the influence of vertical shear on to the resistance to bending. Reported only for Class 1
    and 2 sections, otherwise set to zero.

    Field: Eta1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment usage factor per EN 1993-1-5 (eq.7.1). Reported only for Class 3 and 4 sections,
    otherwise set to zero.

    Field: Eta3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear usage factor per EN 1993-1-5 (eq.7.1). Reported only for Class 3 and 4 sections,
    otherwise set to zero.

    Field: MfRd
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the composite section excluding the steel
    web.

    Field: MplRdNegEff
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the effective area of the composite
    section. Reported only for Class 4 sections, otherwise set to zero.

    Page 2699 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MfRdNegEff
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the effective area of the composite section
    excluding the steel web. Reported only for Class 4 sections, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 19 - SteelICompServStress-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2700 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: SectClsPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for positive bending.

    Field: SectClsNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for negative bending.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.
    Page 2701 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ASlabEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcdSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of the concrete composite slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the composite slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Long-term Modular Ratio.

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Page 2702 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam area.

    Field: AeBeamPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam effective area for positive moment.

    Field: AeBeamNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam effective area for negative moment.

    Page 2703 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: IxeBeamPos
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam effective moment of inertia about horizontal centroidal axis for positive moment.

    Field: IxeBeamNeg
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam effective moment of inertia about horizontal centroidal axis for negative moment.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether the beam is rolled section or not.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Page 2704 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fydFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange design yield strength fyd.

    Field: AeFlgTopNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of top flange for negative moment.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange width.

    Field: fydFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange design yield strength fyd.

    Field: AeFlgBotPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of bottom flange for positive moment.

    Field: AeFlgBotNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of bottom flange for negative moment.

    Page 2705 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fydWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web design yield strength fyd.

    Field: DcWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for positive moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Field: AeWebPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web for positive moment.

    Field: AeWebNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web for negative moment.

    Page 2706 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxeStlBotPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at bottom fiber for positive bending.

    Field: SxeStlBotNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at bottom fiber for negative bending.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxeStlTopPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at top fiber for positive bending.

    Field: SxeStlTopNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at top fiber for negative bending.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.
    Page 2707 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxeLTermBPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed long term section for positive
    moment at bottom of steel beam.

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxeLTermTPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed long term section for positive
    moment at top of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxeSTermBPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed short term section for positive
    moment at bottom of steel beam.

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Page 2708 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxeSTermTPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed short term section for positive
    moment at top of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxeCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed section for negative moment at
    bottom of steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: SxeCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed section for negative moment at top
    of steel beam.

    Field: SxCmpRebNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at the topmost
    rebar.

    Page 2709 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxeCmpRebNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed section for negative moment at the
    topmost rebar.

    Field: k1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Concrete service compression stress limit factor k1 per EN 1992-1-1 7.2(2).

    Field: k3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reinforcement service tensile stress limit factor k3 per EN 1992-1-1 7.2(5).
    Table: Bridge Super Design EUROCODE 20 - SteelICompServStress-FlxPos

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2710 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Page 2711 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear force demand in girder.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. Reported only when design request parameter
    "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: SigEDSerTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress at the section cut.

    Field: SigEDSerBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress at the section cut.

    Page 2712 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TauEDSerWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Shear stress in web.

    Field: SigPrinc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Principal stress per EN 1993-2 (7.3).

    Field: SigDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber compression stress at the section cut.

    Field: fyTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of top compression flange for positive moment.

    Field: fyBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of bottom tension flange for positive moment.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of web for positive moment.

    Field: k1fcdSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete compression stress limit per EN 1992-1-1 7.2.

    Page 2713 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 21 - SteelICompServStress-FlxNeg

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.
    Page 2714 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear force demand in girder.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. Reported only when design request parameter
    "Use Stage Analysis?" is set to No, otherwise set to zero.

    Page 2715 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: SigEDSerTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress at the section cut.

    Field: SigEDSerBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress at the section cut.

    Field: TauEDSerWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Shear stress in web.

    Field: SigPrinc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Principal stress per EN 1993-2 (7.3).

    Page 2716 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SigDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top slab top fiber compression stress at the section cut.

    Field: fyTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of top compression flange for positive moment.

    Field: fyBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of bottom tension flange for positive moment.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Flexural resistance stress of web for positive moment.

    Field: k3fskRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Rebar tension stress limit per EN 1992-1-1 7.2(5).

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 22 - SteelICompServRebar-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.
    Page 2717 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.
    Page 2718 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SectClsPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for positive bending.

    Field: SectClsNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for negative bending.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ASlabEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcdSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of the concrete composite slab.

    Page 2719 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the composite slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Long-term Modular Ratio.

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Page 2720 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam area.

    Field: AeBeamPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam effective area for positive moment.

    Field: AeBeamNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam effective area for negative moment.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: IxeBeamPos
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam effective moment of inertia about horizontal centroidal axis for positive moment.

    Field: IxeBeamNeg
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam effective moment of inertia about horizontal centroidal axis for negative moment.

    Page 2721 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether the beam is rolled section or not.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fydFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange design yield strength fyd.

    Field: AeFlgTopNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of top flange for negative moment.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange width.

    Page 2722 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fydFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange design yield strength fyd.

    Field: AeFlgBotPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of bottom flange for positive moment.

    Field: AeFlgBotNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of bottom flange for negative moment.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fydWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web design yield strength fyd.

    Field: DcWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for positive moment.

    Page 2723 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Field: AeWebPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web for positive moment.

    Field: AeWebNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web for negative moment.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxeStlBotPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at bottom fiber for positive bending.

    Field: SxeStlBotNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at bottom fiber for negative bending.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Page 2724 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxeStlTopPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at top fiber for positive bending.

    Field: SxeStlTopNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at top fiber for negative bending.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.

    Field: SxeLTermBPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed long term section for positive
    moment at bottom of steel beam.

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxeLTermTPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed long term section for positive
    moment at top of steel beam.

    Page 2725 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxeSTermBPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed short term section for positive
    moment at bottom of steel beam.

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxeSTermTPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed short term section for positive
    moment at top of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxeCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed section for negative moment at
    bottom of steel beam.

    Page 2726 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: SxeCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed section for negative moment at top
    of steel beam.

    Field: SxCmpRebNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at the topmost
    rebar.

    Field: SxeCmpRebNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed section for negative moment at the
    topmost rebar.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor k per EN 1994-2 (7.1).

    Field: k3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reinforcement service tensile stress limit factor k3 per EN 1992-1-1 7.2(5).

    Page 2727 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ks
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor ks per EN 1994-2 (7.1).

    Field: CrackWidth
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Design crack width.
    Table: Bridge Super Design EUROCODE 23 - SteelICompServRebar-Min Rebar

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2728 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: Factkc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor kc per EN 1994-2 (7.2).

    Field: MaxBarDia
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Maximum bar diameter for given crack width and rebar stress from EN 1994-2 Table 7.1.

    Field: MaxBarDiaPv
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Maximum bar diameter provided in the top half of the composite slab.

    Field: SigmaS
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum tension stress permitted in the reinforcement immediately after cracking.
    Determined as lesser value of characteristic yield strength and value given in EN 1994-2
    Table 7.1.

    Field: fct_eff
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Mean value of tensile strength of concrete effective at the time when cracks may first
    occur per EN 1994-2 (7.1).

    Page 2729 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AsminReq
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Minimum reinforcement area per unit width required in upper half of the composite slab
    per EN 1994-2 7.4.2.

    Field: AsProv
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Provided reinforcement area per unit width in upper half of the tributary composite slab
    area.

    Field: MaxBarSpac
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Maximum bar spacing for given crack width and rebar stress from EN 1994-2 Table 7.2.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 24 - SteelICompServRebar-Cracking

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2730 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2731 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: DeltaSigmaS
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Increase in reinforcement stresses due to tension stiffening of concrete per EN 1994-2
    (7.5).

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. Reported only when design request parameter
    "Use Stage Analysis?" is set to No. When moment is positive the value is set to zero.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No. When moment is positive the value is set to
    zero.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No. When moment is positive the value is set to
    zero.

    Field: SigRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tension stress at top most rebar at the section cut. When in compression reported as zero.

    Page 2732 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxBarDia
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Maximum bar diameter for given crack width and rebar stress from EN 1994-2 Table 7.1.

    Field: MaxBarSpac
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Maximum bar spacing for given crack width and rebar stress from EN 1994-2 Table 7.2.

    Field: MaxBarDiaPv
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Maximum bar diameter provided in the top half of the composite slab.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 25 - SteelICompCstrStg-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2733 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: SecClsNCPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of non-composite section for positive bending.

    Field: SecClsNCNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of non-composite section for negative bending.

    Field: SectClsPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for positive bending.

    Field: SectClsNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for negative bending.
    Page 2734 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ASlabEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcdSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of the concrete composite slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the composite slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Long-term Modular Ratio.

    Page 2735 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam area.

    Field: AeBeamPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam effective area for positive moment.

    Page 2736 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AeBeamNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam effective area for negative moment.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: IxeBeamPos
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam effective moment of inertia about horizontal centroidal axis for positive moment.

    Field: IxeBeamNeg
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam effective moment of inertia about horizontal centroidal axis for negative moment.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether the beam is rolled section or not.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Page 2737 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fydFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange design yield strength fyd.

    Field: AeFlgTNCPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of top flange of non-composite section for positive moment.

    Field: AeFlgTopNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of top flange for negative moment.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange width.

    Field: fydFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange design yield strength fyd.

    Page 2738 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AeFlgBotPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of bottom flange for positive moment.

    Field: AeFlgBotNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of bottom flange for negative moment.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fydWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web design yield strength fyd.

    Field: DcWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for positive moment.

    Field: DcpWebNCPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression of non-composite section at the positive plastic moment.

    Page 2739 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DcpWebCPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression of composite section at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Field: DcpWebNCNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression of non-composite section at the negative plastic moment.

    Field: DcpWebCNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression of composite section at the negative plastic moment.

    Field: AeWebNCPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web of non-composite section for positive moment.

    Field: AeWebCPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web of composite section for positive moment.

    Field: AeWebNCNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web of non-composite section for negative moment.

    Page 2740 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AeWebCNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web of composite section for negative moment.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxeStlBotPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at bottom fiber for positive bending.

    Field: SxeStlBotNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at bottom fiber for negative bending.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxeStlTopPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at top fiber for positive bending.

    Field: SxeStlTopNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at top fiber for negative bending.

    Page 2741 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.

    Field: SxeLTermBPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed long term section for positive
    moment at bottom of steel beam.

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxeLTermTPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed long term section for positive
    moment at top of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxeSTermBPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed short term section for positive
    moment at bottom of steel beam.

    Page 2742 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxeSTermTPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed short term section for positive
    moment at top of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxeCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed section for negative moment at
    bottom of steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: SxeCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed section for negative moment at top
    of steel beam.

    Page 2743 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamMp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam plastic moment capacity.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Field: PNADistBeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reduction factor beta for positive plastic moment capacity per EN 1994-2; 6.2.1.2 (2).

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.
    Page 2744 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for positive moment.

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section controlling yield moment capacity for negative moment.

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the bottom flange.

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the top flange.

    Field: ImpAlphaLT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Imperfection factor alpha LT per EN 1993-1-1 Table 6.3.

    Field: DiaphDwnSta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Section cut index of nearest downstation diaphragm or rigid support.
    Page 2745 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DiaphUpSta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Section cut index of nearest upstation diaphragm or rigid support.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.
    Table: Bridge Super Design EUROCODE 26 - SteelICompCstrStg-FlxPos

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2746 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If negative moment is set to zero. Reported only for Class 1 and 2
    sections, otherwise set to zero.
    Page 2747 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder. Considered only when design request parameter "Use Stage
    Analysis?" is set to Yes, otherwise set to zero.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. Reported only when design request parameter
    "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to demand at the section cut. Reported only for Class 3
    and 4 sections, otherwise set to zero.

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to demand at the section cut. Reported only for Class 3
    and 4 sections, otherwise set to zero.

    Page 2748 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MDiaphDown
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest downstation diaphragm or rigid support.

    Field: MDiaphUp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest upstation diaphragm or rigid support. Set to zero if sign is
    different from demand moment on downstation diaphragm.

    Field: VDiaphDown
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand at nearest downstation diaphragm or rigid support.

    Field: RatioMiu
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear demand ratio miu for segment of beam between rigid lateral supports per EN 1993-2
    6.3.4.2 (7).

    Field: FactPhi
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor Phi for segment of beam between rigid lateral supports per EN 1993-2 6.3.4.2 (7).

    Field: FactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor m for segment of beam between rigid lateral supports per EN 1993-2 6.3.4.2 (7)
    (assuming gamma=0).

    Page 2749 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LambdaLT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness for torsional-flexural buckling per EN 1993-2 eq 6.10 and eq. 6.12.

    Field: FactPhiLT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor PhiLT for lateral-torsional buckling per EN 1993-1-1 eq 6.56.

    Field: FactChiLT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reduction factor ChiLT for lateral-torsional buckling per EN 1993-1-1 eq 6.56.

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for positive bending. Reported only for Class 1 and 2
    sections.

    Field: fDeck
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress at top of composite slab. Reported only for Class 3 and 4 sections, otherwise set to
    zero.

    Field: frcPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for positive moment. Reported
    only for Class 3 and 4 sections, otherwise set to zero.

    Page 2750 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: frtPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for positive moment. Reported only for
    Class 3 and 4 sections, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 27 - SteelICompCstrStg-FlxNeg

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2751 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Page 2752 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If positive moment is set to zero. Reported only for Class 1 and 2
    sections, otherwise set to zero.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Axial force demand in girder. Considered only when design request parameter "Use Stage
    Analysis?" is set to Yes, otherwise set to zero.

    Field: MuNonComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on noncomposite section. Reported only when design request parameter
    "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: MuLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on long term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: MuSTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand on short term composite section. Reported only when design request
    parameter "Use Stage Analysis?" is set to No, otherwise set to zero.

    Field: fbuComp
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange compression stress due to demand at the section cut. Reported only for Class 3
    and 4 sections, otherwise set to zero.

    Page 2753 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuTens
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange tension stress due to demand at the section cut. Reported only for Class 3
    and 4 sections, otherwise set to zero.

    Field: MDiaphDown
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest downstation diaphragm or rigid support.

    Field: MDiaphUp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand at nearest upstation diaphragm or rigid support. Set to zero if sign is
    different from demand moment on downstation diaphragm.

    Field: VDiaphDown
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand at nearest downstation diaphragm or rigid support.

    Field: RatioMiu
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear demand ratio miu for segment of beam between rigid lateral supports per EN 1993-2
    6.3.4.2 (7).

    Field: FactPhi
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor Phi for segment of beam between rigid lateral supports per EN 1993-2 6.3.4.2 (7).

    Page 2754 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor m for segment of beam between rigid lateral supports per EN 1993-2 6.3.4.2 (7)
    (assuming gamma=0).

    Field: LambdaLT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness for torsional-flexural buckling per EN 1993-2 eq 6.10 and eq. 6.12.

    Field: FactPhiLT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor PhiLT for lateral-torsional buckling per EN 1993-1-1 eq 6.56.

    Field: FactChiLT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reduction factor ChiLT for lateral-torsional buckling per EN 1993-1-1 eq 6.56.

    Field: MrNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design flexural resistance moment for negative bending. Reported only for Class 1 and 2
    sections, otherwise set to zero.

    Field: frcNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of compression flange for negative moment. Reported
    only for Class 3 and 4 sections, otherwise set to zero.

    Page 2755 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: frtNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design flexural resistance stress of tension flange for negative moment. Reported only for
    Class 3 and 4 sections, otherwise set to zero.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 28 - SteelICompCstrStg-Shear

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2756 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: EndPostType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    End support clasiffication per EN 1993-1-5 Figure 5.1.

    Page 2757 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: Vrd
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design shear resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design plastic shear resistance.

    Field: a
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: eta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor per EN 1993-1-5 5.1.2 Note 2.

    Field: kTau
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Minimum shear buckling coefficient for the web panel per EN 1993-1-5 A.3.

    Page 2758 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lamdaw
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness parameter per EN 1993-1-5 5.3 Note 2.

    Field: Chiw
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor for contribution of the web to the shear buckling resistance per EN 1993-1-5 table
    5.1.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 29 - SteelICompCstrStg-FlxShrPos

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2759 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Page 2760 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If negative moment set to zero. Reported only for Class 1 and 2
    sections.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: rho
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reduction factor for web fyd per EN 1994-2 6.2.2.4 (eq 6.5). Reported only for Class 1
    and 2 sections.

    Field: BeamMp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the non-composite section.

    Field: MplRdPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the composite section.

    Page 2761 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MplRdRedPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the composite (when
    SlabStatus=Composite) or non-composite (when SlabStatus=Non-composite) section
    taking into account the influence of vertical shear on to the resistance to bending.
    Reported only for Class 1 and 2 sections.

    Field: Eta1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment usage factor per EN 1993-1-5 (eq.7.1). Reported only for Class 3 and 4 sections.

    Field: Eta3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear usage factor per EN 1993-1-5 (eq.7.1). Reported only for Class 3 and 4 sections.

    Field: MfRdBeam
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the non-composite section excluding the steel web.

    Field: MfRdComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the composite section excluding the steel
    web.

    Field: MplRdeBeamP
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the effective area of the non-composite
    section. Reported only for Class 4 sections.

    Page 2762 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MfRdeBeamP
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the effective area of the non-composite section
    excluding the steel web. Reported only for Class 4 sections.

    Field: MplRdeCompP
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the effective area of the composite section.
    Reported only for Class 4 sections.

    Field: MfRdeCompP
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the effective area of the composite section
    excluding the steel web. Reported only for Class 4 sections.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 30 - SteelICompCstrStg-FlxShrNeg

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2763 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2764 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If positive moment set to zero. Reported only for Class 1 and 2
    sections.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: rho
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reduction factor for web fyd per EN 1994-2 6.2.2.4 (eq 6.5). Reported only for Class 1
    and 2 sections.

    Field: BeamMp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the non-composite section.

    Page 2765 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MplRdNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the composite section.

    Field: MplRdRedNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the composite (when
    SlabStatus=Composite) or non-composite (when SlabStatus=Non-composite) section
    taking into account the influence of vertical shear on to the resistance to bending.
    Reported only for Class 1 and 2 sections.

    Field: Eta1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment usage factor per EN 1993-1-5 (eq.7.1). Reported only for Class 3 and 4 sections.

    Field: Eta3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear usage factor per EN 1993-1-5 (eq.7.1). Reported only for Class 3 and 4 sections.

    Field: MfRdBeam
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the non-composite section excluding the steel web.

    Field: MfRdComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the composite section excluding the steel
    web.

    Page 2766 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MplRdeBeamN
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the effective area of the non-composite
    section. Reported only for Class 4 sections.

    Field: MfRdeBeamN
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the effective area of the non-composite section
    excluding the steel web. Reported only for Class 4 sections.

    Field: MplRdeCompN
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the effective area of the composite
    section. Reported only for Class 4 sections.

    Field: MfRdeCompN
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the effective area of the composite section
    excluding the steel web. Reported only for Class 4 sections.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 31 - SteelICompCstrNStg-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2767 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: SecClsNCPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of non-composite section for positive bending.

    Field: SecClsNCNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of non-composite section for negative bending.
    Page 2768 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SectClsPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for positive bending.

    Field: SectClsNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Classification of composite section for negative bending.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ASlabEff
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcdSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of the concrete composite slab.

    Page 2769 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the composite slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Long-term Modular Ratio.

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Page 2770 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam area.

    Field: AeBeamPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam effective area for positive moment.

    Field: AeBeamNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Steel beam effective area for negative moment.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Young's modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: IxeBeamPos
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam effective moment of inertia about horizontal centroidal axis for positive moment.

    Field: IxeBeamNeg
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam effective moment of inertia about horizontal centroidal axis for negative moment.

    Page 2771 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether the beam is rolled section or not.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fydFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange design yield strength fyd.

    Field: AeFlgTNCPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of top flange of non-composite section for positive moment.

    Field: AeFlgTopNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of top flange for negative moment.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange thickness.

    Page 2772 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam bottom flange width.

    Field: fydFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange design yield strength fyd.

    Field: AeFlgBotPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of bottom flange for positive moment.

    Field: AeFlgBotNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of bottom flange for negative moment.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fydWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web design yield strength fyd.

    Page 2773 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DcWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for positive moment.

    Field: DcpWebNCPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression of non-composite section at the positive plastic moment.

    Field: DcpWebCPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression of composite section at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Field: DcpWebNCNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression of non-composite section at the negative plastic moment.

    Field: DcpWebCNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression of composite section at the negative plastic moment.

    Field: AeWebNCPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web of non-composite section for positive moment.

    Page 2774 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AeWebCPos
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web of composite section for positive moment.

    Field: AeWebNCNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web of non-composite section for negative moment.

    Field: AeWebCNeg
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Effective area of web of composite section for negative moment.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxeStlBotPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at bottom fiber for positive bending.

    Field: SxeStlBotNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at bottom fiber for negative bending.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Page 2775 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxeStlTopPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at top fiber for positive bending.

    Field: SxeStlTopNg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for steel beam at top fiber for negative bending.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.

    Field: SxeLTermBPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed long term section for positive
    moment at bottom of steel beam.

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxeLTermTPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed long term section for positive
    moment at top of steel beam.

    Page 2776 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxeSTermBPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed short term section for positive
    moment at bottom of steel beam.

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxeSTermTPs
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed short term section for positive
    moment at top of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxeCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed section for negative moment at
    bottom of steel beam.

    Page 2777 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: SxeCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Effective section modulus for composite transformed section for negative moment at top
    of steel beam.

    Field: BeamMp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam plastic moment capacity.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Page 2778 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PNADistBeta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reduction factor beta for positive plastic moment capacity per EN 1994-2; 6.2.1.2 (2).

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for positive moment.

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section controlling yield moment capacity for negative moment.

    Page 2779 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the bottom flange.

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the top flange.

    Field: ImpAlphaLT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Imperfection factor alpha LT per EN 1993-1-1 Table 6.3.

    Field: DiaphDwnSta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Section cut index of nearest downstation diaphragm or rigid support.

    Field: DiaphUpSta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Section cut index of nearest upstation diaphragm or rigid support.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.
    Table: Bridge Super Design EUROCODE 34 - SteelICompCstrNStg-Shear

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.
    Page 2780 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Page 2781 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: EndPostType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    End support clasiffication per EN 1993-1-5 Figure 5.1.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Field: Vrd
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design shear resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design plastic shear resistance.

    Page 2782 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: a
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: eta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor per EN 1993-1-5 5.1.2 Note 2.

    Field: kTau
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Minimum shear buckling coefficient for the web panel per EN 1993-1-5 A.3.

    Field: Lamdaw
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness parameter per EN 1993-1-5 5.3 Note 2.

    Field: Chiw
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor for contribution of the web to the shear buckling resistance per EN 1993-1-5 table
    5.1.

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 35 - SteelICompCstrNStg-FlxShrPos

    Page 2783 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Page 2784 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: MuPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If negative moment set to zero. Reported only for Class 1 and 2
    sections.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).

    Page 2785 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: rho
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reduction factor for web fyd per EN 1994-2 6.2.2.4 (eq 6.5). Reported only for Class 1
    and 2 sections.

    Field: BeamMp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the non-composite section.

    Field: MplRdPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the composite section.

    Field: MplRdRedPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the composite (when
    SlabStatus=Composite) or non-composite (when SlabStatus=Non-composite) section
    taking into account the influence of vertical shear on to the resistance to bending.
    Reported only for Class 1 and 2 sections.

    Field: Eta1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment usage factor per EN 1993-1-5 (eq.7.1). Reported only for Class 3 and 4 sections.

    Field: Eta3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear usage factor per EN 1993-1-5 (eq.7.1). Reported only for Class 3 and 4 sections.

    Page 2786 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MfRdBeam
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the non-composite section excluding the steel web.

    Field: MfRdComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the composite section excluding the steel
    web.

    Field: MplRdeBeamP
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the effective area of the non-composite
    section. Reported only for Class 4 sections.

    Field: MfRdeBeamP
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the effective area of the non-composite section
    excluding the steel web. Reported only for Class 4 sections.

    Field: MplRdeCompP
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic positive moment of resistance of the effective area of the composite section.
    Reported only for Class 4 sections.

    Field: MfRdeCompP
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the effective area of the composite section
    excluding the steel web. Reported only for Class 4 sections.

    Page 2787 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design EUROCODE 36 - SteelICompCstrNStg-FlxShrNeg

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.
    Page 2788 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo name for these values.

    Field: StepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    StepType for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Eurocode equation that was used to derive resistance.

    Field: SlabStatus
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Structural status of concrete deck at step. it is either non-composite or composite.

    Field: MuNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Demand moment. If positive moment set to zero. Reported only for Class 1 and 2
    sections.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Demand shear (absolute value).
    Page 2789 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: rho
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Reduction factor for web fyd per EN 1994-2 6.2.2.4 (eq 6.5). Reported only for Class 1
    and 2 sections.

    Field: BeamMp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the non-composite section.

    Field: MplRdNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the composite section.

    Field: MplRdRedNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the composite (when
    SlabStatus=Composite) or non-composite (when SlabStatus=Non-composite) section
    taking into account the influence of vertical shear on to the resistance to bending.
    Reported only for Class 1 and 2 sections.

    Field: Eta1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Moment usage factor per EN 1993-1-5 (eq.7.1). Reported only for Class 3 and 4 sections.

    Field: Eta3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear usage factor per EN 1993-1-5 (eq.7.1). Reported only for Class 3 and 4 sections.

    Page 2790 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MfRdBeam
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the non-composite section excluding the steel web.

    Field: MfRdComp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the composite section excluding the steel
    web.

    Field: MplRdeBeamN
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the effective area of the non-composite
    section. Reported only for Class 4 sections.

    Field: MfRdeBeamN
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the effective area of the non-composite section
    excluding the steel web. Reported only for Class 4 sections.

    Field: MplRdeCompN
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic negative moment of resistance of the effective area of the composite
    section. Reported only for Class 4 sections.

    Field: MfRdeCompN
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Design plastic moment of resistance of the effective area of the composite section
    excluding the steel web. Reported only for Class 4 sections.

    Page 2791 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Demand over capacity ratio.
    Table: Bridge Super Design IRC-112-2011 01 - CBoxStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for the bridge section.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.
    Page 2792 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.
    Page 2793 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design IRC-112-2011 02 - CBoxShear-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2794 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LDFV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Portion of total demand shear assummed to be carried by the web.

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section NEd and Vp to obtain girder NEd and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: DuctFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor that was used to multiply PT duct diameter when evaluating nominal web thickness
    per 10.14.

    Field: WebWidthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective girder web width per 10.14.
    Page 2795 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ak
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area enclosed by shear flow path, including the area of holes, if any.

    Field: fckConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Characteristic compressive strength of concrete.

    Field: GammaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: fcdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of concrete.

    Field: fctdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design tensile strength of concrete.

    Field: FactAplhaL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor for transmission length of PT, used in shear resistance equation 6.4. Typical values
    1.0 for post-tensioning.

    Field: fykVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Characteristic yield strength of vertical shear rebar.
    Page 2796 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GammaS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcement.

    Field: fydVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of vertical shear rebar.

    Field: fydLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of longitudinal rebar.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle between the concrete compression strut and the beam axis perpendicular to the
    shear force.

    Field: FlagPTPrsn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Presence of PT.

    Field: GirderIxx
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Girder moment of inertia about horizontal centroidal axis.

    Field: 1stAMomTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Girder first moment of area above and about horizontal centroidal axis.
    Page 2797 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Bridge Super Design IRC-112-2011 03 - CBoxShear-Result

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Page 2798 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatV
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the ratio of Ved over Vrdmax (rVedVrdmax).

    Field: CtrlDCRatT
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the ratio of Ted over Trdmax combined with Ved over
    Vrdmax (RatioTandV).

    Field: CtrlAsVperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of transverse shear rebar (AsVperL).

    Field: CtrlAsLBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the bottom slab.

    Field: CtrlAsLTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the top slab.
    Page 2799 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlAt
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of closed transverse torsion reinforcement
    (AstwPerL).

    Field: CtrlAtLong
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal torsion reinforcement (Astl).

    Field: Ved
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Ultimate design shear force resulting from external loading and prestressing.

    Field: Ned
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Ultimate demand axial force resulting from external loading and prestressing (positive if
    tensile).

    Field: Med
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Ultimate demand moment resulting from external loading.

    Field: Ted
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Ultimate demand torsion moment resulting from external loading.

    Page 2800 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of all of the effective prestressing forces.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth of the cross section.

    Field: InrLeverArm
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Inner lever arm z.

    Field: SigmaCP
    Field is Imported: No
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    Concrete stress at the centroidal axis due to axial load and/or prestressing. Positive if
    compressive.

    Field: VrdcType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Vrdc derived based on region Reinforced, Prestressed Single Span Cracked or Prestressed
    Continuous or Uncracked.

    Field: Vrdc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design shear resistance of the girder without shear reinforcement.

    Page 2801 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RatVedVrdc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ved over Vrdc.

    Field: rho1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longitudinal reinforcement/ PT ratio used in formula 6.2.a.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: k1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: Crdc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: RatfyDesFyk
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear rebar design stress over shear rebar characteristic yield strength fyk.

    Field: nu1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor for concrete cracked in shear.

    Page 2802 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaCW
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coeff taking account of the state of the stress in the compression chord.

    Field: Vrdmax
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design value of maximum shear force limited by crushing of the compression struts.

    Field: rVedVrdmax
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ved over Vrdmax.

    Field: RatioTandV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ted over Trdmax combined with Ved over Vrdmax.

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Pass or Fail.

    Field: AswPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of vertical shear reinforcement per unit length.

    Field: AswFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controlling flag for AsVPerL.

    Page 2803 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: rhoWMin
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Minimum shear reinforcement ratio per 9.5N.

    Field: AslTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the top slab due to shear.

    Field: AslBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the bottom slab due to shear.

    Field: AstwPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of transverse torsion reinforcement per unit length for each outer and inner
    link leg.

    Field: AstlPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of longitudinal torsion reinforcement per unit length for each outer and
    inner layer.
    Table: Bridge Super Design IRC-112-2011 04 - CBoxFlexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2804 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive factored moment resistance for the girder.

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment demand for the girder.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Page 2805 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative factored moment resistance for the girder.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment demand for the girder.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Field: DepthSect
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the section.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.
    Page 2806 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ASlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the top slab.

    Field: EqThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the top slab for the bridge section at this station.

    Field: WSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the top slab.

    Field: SumWebWdth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Sum of web widths.

    Field: ASlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of the bottom slab.

    Field: EqThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the bottom slab for the bridge section at this station.

    Field: WSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the bottom slab.

    Page 2807 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of reinforcement bars that are located above the bottom compression zone. Tension
    reinforcement used to calculate MrNeg.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of reinforcemnet bars that are located below the top compression zone. Tension
    reinforcement used to calculate MrPos.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of prestress tendons that are located above the bottom compression zone. Used to
    calculate MrNeg.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of prestress tendons that are located below the top compression zone. Used to
    calculate MrPos.

    Field: AlphaCC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient taking account of long term effects on the compressive strength and of
    unfavourable effects resulting from the way the load is applied.

    Field: GammaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Page 2808 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fcd
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value of concrete compressive strength.

    Field: FactEta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the concrete effective strength in compression.

    Field: FactLambda
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the effective height of the compression zone.

    Field: EpsCU3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ultimate compressive strain in the concrete.

    Field: GammaRebar
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: fydLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of longitudinal rebar.

    Field: GammaPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Page 2809 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fpd
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value for the prestressing steel stress. (average).

    Field: PrestrainPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Prestrain in tendon due to prestressing force (average).

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: xDistForPos
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    x - distance between the neutral axis and the compressive face for positive moment.

    Field: xDistForNeg
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    x - distance between the neutral axis and the compressive face for negative moment.

    Field: xLamdaPos
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Compression block depth for positive moment.

    Page 2810 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: xLambdaNeg
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Compression block depth for negative moment.

    Field: xLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of compression block for positive moment N/A=-1; Within Flange = 1; Into Web
    = 2; At Web End = 3; No Convergence = 4; Overreinforced =5.

    Field: xLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of compression block for negative moment N/A=-1; Within Flange = 1; Into Web
    = 2; At Web End = 3; No Convergence = 4; Overreinforced =5.

    Field: ForceRebTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in reinforcement bars that are located above the bottom compression zone. Used to
    calculate MrNeg.

    Field: ForceRebBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in reinforcement bars that are located below the top compression zone. Used to
    calculate MrPos.

    Field: ForcePTTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in tendons that are located above the bottom compression zone. Used to calculate
    MrNeg.

    Page 2811 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ForcePTBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in tendons that are located below the top compression zone. Used to calculate
    MrPos.

    Field: ForceConTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in concrete compression block for positive moment.

    Field: ForceConBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in concrete compression block for negative moment.
    Table: Bridge Super Design IRC-112-2011 05 - CBox2Stress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2812 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this GirderPart.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Page 2813 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.
    Page 2814 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design IRC-112-2011 06 - CBox2Shear-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2815 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear regions.

    Field: LLDFM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment regions.

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section NEd and Vp to obtain girder NEd and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: DuctFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor that was used to multiply PT duct diameter when evaluating nominal web thickness
    per 10.14.

    Field: WebWidthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective girder web width per 10.14.

    Field: fckConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Characteristic compressive strength of concrete.
    Page 2816 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GammaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: fcdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of concrete.

    Field: fctdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design tensile strength of concrete.

    Field: FactAplhaL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor for transmission length of PT, used in shear resistance equation 6.4. Typical values
    1.0 for post-tensioning.

    Field: fykVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Characteristic yield strength of vertical shear rebar.

    Field: GammaS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcement.

    Field: fydVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of vertical shear rebar.
    Page 2817 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fydLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of longitudinal rebar.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle between the concrete compression strut and the beam axis perpendicular to the
    shear force.

    Field: FlagPTPrsn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Presence of PT.

    Field: GirderIxx
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Girder moment of inertia about horizontal centroidal axis.

    Field: 1stAMomTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Girder first moment of area above and about horizontal centroidal axis.
    Table: Bridge Super Design IRC-112-2011 07 - CBox2Shear-Result

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Page 2818 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Page 2819 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the ratio of Ved over Vrdmax.

    Field: CtrlAsVperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of transverse shear rebar (AsVperL).

    Field: CtrlAsLBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the bottom slab.

    Field: CtrlAsLTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the top slab.

    Field: Ved
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Ultimate design shear force resulting from external loading and prestressing.

    Field: Ned
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Ultimate demand axial force resulting from external loading and prestressing (positive if
    tensile).

    Field: Med
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Ultimate demand moment resulting from external loading.
    Page 2820 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of all of the effective prestressing forces.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth of the cross section.

    Field: InrLeverArm
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Inner lever arm z.

    Field: SigmaCP
    Field is Imported: No
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    Concrete stress at the centroidal axis due to axial load and/or prestressing. Positive if
    compressive.

    Field: VrdcType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Vrdc derived based on region Reinforced, Prestressed Single Span Cracked or Prestressed
    Continuous or Uncracked.

    Field: Vrdc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design shear resistance of the girder without shear reinforcement.

    Page 2821 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RatVedVrdc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ved over Vrdc.

    Field: rho1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longitudinal reinforcement/ PT ratio used in formula 6.2.a.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: k1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: Crdc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: RatfyDesFyk
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear rebar design stress over shear rebar characteristic yield strength fyk.

    Field: nu1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor for concrete cracked in shear.

    Page 2822 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaCW
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coeff taking account of the state of the stress in the compression chord.

    Field: Vrdmax
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design value of maximum shear force limited by crushing of the compression struts.

    Field: rVedVrdmax
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ved over Vrdmax.

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Pass or Fail.

    Field: AswPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of vertical shear reinforcement per unit length.

    Field: AswFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controlling flag for AsVPerL.

    Field: rhoWMin
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Minimum shear reinforcement ratio per 9.5N.

    Page 2823 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AslTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the top slab due to shear.

    Field: AslBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the bottom slab due to shear.
    Table: Bridge Super Design IRC-112-2011 08 - CBox2Flexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2824 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive factored moment resistance for the girder.

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment demand for the girder.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative factored moment resistance for the girder.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment demand for the girder.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Page 2825 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: EqThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the top slab for the bridge section at this station.
    Page 2826 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Field: EqThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Equivalent thickness of the bottom slab for the bridge section at this station.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of reinforcement bars that are located above the bottom compression zone. Tension
    reinforcement used to calculate MrNeg.

    Page 2827 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of reinforcemnet bars that are located below the top compression zone. Tension
    reinforcement used to calculate MrPos.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of prestress tendons that are located above the bottom compression zone. Used to
    calculate MrNeg.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of prestress tendons that are located below the top compression zone. Used to
    calculate MrPos.

    Field: AlphaCC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient taking account of long term effects on the compressive strength and of
    unfavourable effects resulting from the way the load is applied.

    Field: GammaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: fcdGirder
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value of concrete compressive strength of the girder.

    Page 2828 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactEta
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the concrete effective strength in compression.

    Field: FactLambda
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the effective height of the compression zone.

    Field: EpsCU3
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ultimate compressive strain in the concrete.

    Field: GammaRebar
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.

    Field: fydLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of longitudinal rebar.

    Field: GammaPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: fpd
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value for the prestressing steel stress. (average).

    Page 2829 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PrestrainPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Prestrain in tendon due to prestressing force (average).

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: xDistForPos
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    x - distance between the neutral axis and the compressive face for positive moment.

    Field: xDistForNeg
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    x - distance between the neutral axis and the compressive face for negative moment.

    Field: xLamdaPos
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Compression block depth for positive moment.

    Field: xLambdaNeg
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Compression block depth for negative moment.

    Page 2830 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: xLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of compression block for positive moment N/A=-1; Within Flange = 1; Into Web
    = 2; At Web End = 3; No Convergence = 4; Overreinforced =5.

    Field: xLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of compression block for negative moment N/A=-1; Within Flange = 1; Into Web
    = 2; At Web End = 3; No Convergence = 4; Overreinforced =5.

    Field: ForceRebTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in reinforcement bars that are located above the bottom compression zone. Used to
    calculate MrNeg.

    Field: ForceRebBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in reinforcement bars that are located below the top compression zone. Used to
    calculate MrPos.

    Field: ForcePTTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in tendons that are located above the bottom compression zone. Used to calculate
    MrNeg.

    Field: ForcePTBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in tendons that are located below the top compression zone. Used to calculate
    MrPos.

    Page 2831 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ForceConTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in concrete compression block for positive moment.

    Field: ForceConBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in concrete compression block for negative moment.
    Table: Bridge Super Design IRC-112-2011 09 - PCCompStress

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2832 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: GirderPart
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Slab or Beam.

    Field: Point
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Index of the stress point for this GirderPart.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: StressMax
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Maximum stress at this stress point.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum stress.

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum stress.

    Field: MaxTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at top of this bridge section.

    Page 2833 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MaxBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls maximum stress at the bottom of this bridge
    section.

    Field: StressMin
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Minimum stress at this stress point.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum stress.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum stress.

    Field: MinTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at top of this bridge section.

    Field: MinBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this stress point controls minimum stress at bottom of this bridge section.

    Field: TensLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Tensile stress limit at this stress point.
    Page 2834 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CompLimit
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compressive stress limit at this stress point.
    Table: Bridge Super Design IRC-112-2011 10 - PCCompShear-Prop

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear regions.
    Page 2835 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment regions.

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section NEd and Vp to obtain girder NEd and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: fckConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Characteristic compressive strength of concrete.

    Field: GammaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: fcdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design compressive strength of concrete.

    Field: fctdConc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design tensile strength of concrete.

    Page 2836 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactAplhaL
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor for transmission length of PT, used in shear resistance equation 6.4. Typical values
    1.0 for post-tensioning.

    Field: fykVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Characteristic yield strength of vertical shear rebar.

    Field: GammaS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcement.

    Field: fydVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of vertical shear rebar.

    Field: fydLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of longitudinal rebar.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle between the concrete compression strut and the beam axis perpendicular to the
    shear force.

    Page 2837 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FlagPTPrsn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Presence of PT.

    Field: GirderIxx
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Girder moment of inertia about horizontal centroidal axis.

    Field: 1stAMomTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Girder first moment of area above and about horizontal centroidal axis.
    Table: Bridge Super Design IRC-112-2011 11 - PCCompShear-Result

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.
    Page 2838 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlDCRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the ratio of Ved over Vrdmax.

    Field: CtrlAsVperL
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of transverse shear rebar (AsVperL).

    Field: CtrlAsLBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the bottom slab.

    Page 2839 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CtrlAsLTop
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the area of longitudinal rebar in the top slab.

    Field: Ved
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Ultimate design shear force resulting from external loading and prestressing.

    Field: Ned
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Ultimate demand axial force resulting from external loading and prestressing (positive if
    tensile).

    Field: Med
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Ultimate demand moment resulting from external loading.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of all of the effective prestressing forces.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth of the cross section.

    Field: InrLeverArm
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Inner lever arm z.
    Page 2840 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SigmaCP
    Field is Imported: No
    Format: Force/Area (Forces section of form)
    Units: Force/Length2
    Concrete stress at the centroidal axis due to axial load and/or prestressing. Positive if
    compressive.

    Field: VrdcType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Vrdc derived based on region Reinforced, Prestressed Single Span Cracked or Prestressed
    Continuous or Uncracked.

    Field: Vrdc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design shear resistance of the girder without shear reinforcement.

    Field: RatVedVrdc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ved over Vrdc.

    Field: rho1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longitudinal reinforcement/ PT ratio used in formula 6.2.a.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Page 2841 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: k1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: Crdc
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor used in formula 6.2.a.

    Field: RatfyDesFyk
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear rebar design stress over shear rebar characteristic yield strength fyk.

    Field: nu1
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strength reduction factor for concrete cracked in shear.

    Field: AlphaCW
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coeff taking account of the state of the stress in the compression chord.

    Field: Vrdmax
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Design value of maximum shear force limited by crushing of the compression struts.

    Field: rVedVrdmax
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of Ved over Vrdmax.

    Page 2842 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FailureFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Pass or Fail.

    Field: AswPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Required area of vertical shear reinforcement per unit length.

    Field: AswFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Controlling flag for AsVPerL.

    Field: rhoWMin
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Minimum shear reinforcement ratio per 9.5N.

    Field: AslTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the top slab due to shear.

    Field: AslBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Required area of longitudinal reinforcement in the bottom slab due to shear.
    Table: Bridge Super Design IRC-112-2011 12 - PCCompFlexure

    Field: DesReqName
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge design request.
    Page 2843 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: ResistPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive factored moment resistance for the girder.

    Field: DemandMax
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Positive moment demand for the girder.

    Field: ComboMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls maximum moment demand.

    Page 2844 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSetMax
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls maximum moment demand.

    Field: ResistNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative factored moment resistance for the girder.

    Field: DemandMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Negative moment demand for the girder.

    Field: ComboMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo that controls minimum moment demand.

    Field: DSetMin
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set that controls minimum moment demand.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the girder.

    Page 2845 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabTrib
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Tributary width of the composite slab.

    Field: ThBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of beam top flange.

    Field: WBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of beam top flange.
    Page 2846 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: WebHeight
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Height of the beam web.

    Field: ThBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of beam bottom flange.

    Field: WBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of beam bottom flange.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of reinforcement bars that are located above the bottom compression zone. Tension
    reinforcement used to calculate MrNeg.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of reinforcemnet bars that are located below the top compression zone. Tension
    reinforcement used to calculate MrPos.

    Page 2847 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of prestress tendons that are located above the bottom compression zone. Used to
    calculate MrNeg.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of prestress tendons that are located below the top compression zone. Used to
    calculate MrPos.

    Field: AlphaCC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Coefficient taking account of long term effects on the compressive strength and of
    unfavourable effects resulting from the way the load is applied.

    Field: GammaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for concrete.

    Field: fcdBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value of concrete compressive strength of the girder.

    Field: FactEtaB
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the girder concrete effective strength in compression.

    Page 2848 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FactLambdaB
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the effective height of the compression zone based on the girder concrete.

    Field: EpsCU3B
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ultimate compressive strain in the girder concrete.

    Field: fcdSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value of concrete compressive strength of the composite slab.

    Field: FactEtaS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the composite slab concrete effective strength in compression.

    Field: FactLambdaS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor defining the effective height of the compression zone based on the composite slab
    concrete.

    Field: EpsCU3S
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ultimate compressive strain in the composite slab concrete.

    Field: GammaRebar
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for reinforcing steel.
    Page 2849 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fydLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design yield strength of longitudinal rebar.

    Field: GammaPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Partial safety factor for prestressing steel.

    Field: fpd
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Design value for the prestressing steel stress. (average).

    Field: PrestrainPT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Prestrain in tendon due to prestressing force (average).

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: xDistForPos
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    x - distance between the neutral axis and the compressive face for positive moment.

    Page 2850 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: xDistForNeg
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    x - distance between the neutral axis and the compressive face for negative moment.

    Field: xLamdaPos
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Compression block depth for positive moment.

    Field: xLambdaNeg
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Compression block depth for negative moment.

    Field: xLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of compression block for positive moment N/A=-1; Within Flange = 1; Into Web
    = 2; At Web End = 3; No Convergence = 4; Overreinforced =5.

    Field: xLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of compression block for negative moment N/A=-1; Within Flange = 1; Into Web
    = 2; At Web End = 3; No Convergence = 4; Overreinforced =5.

    Field: ForceRebTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in reinforcement bars that are located above the bottom compression zone. Used to
    calculate MrNeg.

    Page 2851 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ForceRebBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in reinforcement bars that are located below the top compression zone. Used to
    calculate MrPos.

    Field: ForcePTTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in tendons that are located above the bottom compression zone. Used to calculate
    MrNeg.

    Field: ForcePTBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in tendons that are located below the top compression zone. Used to calculate
    MrPos.

    Field: ForceConTop
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in concrete compression block for positive moment.

    Field: ForceConBot
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Force in concrete compression block for negative moment.
    Table: Bridge Super Rating - Rating Result Status

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Page 2852 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    A number that represents the design status.

    Field: Message
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Message corresponding to the Status number.
    Table: Bridge Super Rating AASHTOLRFD07 01 - CBoxFlexure-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.
    Page 2853 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: MnPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for positive moment.

    Field: MnNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for negative moment.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Page 2854 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.
    Page 2855 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Field: ThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the bottom slab.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Page 2856 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.
    Page 2857 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Section concrete strength f'c.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 - average.

    Page 2858 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Page 2859 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Rating AASHTOLRFD07 02 - CBoxFlexure-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.
    Page 2860 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3P
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from P Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Page 2861 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment resitance (Mn*resistance factor).

    Field: Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTOLRFD07 03 - CBoxMinRebar-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: MnPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for positive moment.
    Page 2862 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MnNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for negative moment.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Page 2863 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Page 2864 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Field: ThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the bottom slab.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.
    Page 2865 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Page 2866 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Section concrete strength f'c.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 - average.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Page 2867 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Rating AASHTOLRFD07 04 - CBoxMinRebar-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Page 2868 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: MomentSign
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The sign of moment for which min rebar is checked. 1-positive; 2-negative.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: fcpe
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compression stress in concrtete due to effective PT force only at extreme fiber of section
    where tensile stress is caused by externally applied loads.

    Field: Mdnc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Total unfactored dead load moment acting on the monolithic or noncomposite section.
    Page 2869 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fr
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of rupture.

    Field: Snc
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for the extreme fiber of the monolithic or nonncomposite section where
    tensile stress is casused by externally applied loads.

    Field: Sc
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for the extreme fiber of the composite section where tensile stress is
    casused by externally applied loads.

    Field: Mcr120pc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    1.2 times cracking moment.

    Field: Mu133pc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    1.33 times the factored moment required by the applicable strength load combination.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment resitance (Mn*resistance factor).

    Page 2870 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MinRbrOK
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Indicates whether is AASHTO LRFD Section 5.3.3.2. satisfied. 0-No; 1-Yes;2-Not
    Applicable.
    Table: Bridge Super Rating AASHTOLRFD07 08 - CBox2Flexure-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Page 2871 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: MnPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for positive moment.

    Field: MnNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for negative moment.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Page 2872 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Page 2873 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Field: ThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the bottom slab.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Page 2874 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.
    Page 2875 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fcConGirder
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the girder.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 - average.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Page 2876 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Page 2877 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Rating AASHTOLRFD07 09 - CBox2Flexure-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.
    Page 2878 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3P
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from P Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Page 2879 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment resitance (Mn*resistance factor).

    Field: Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTOLRFD07 10 - CBox2MinRebar-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2880 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: MnPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for positive moment.

    Field: MnNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for negative moment.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Page 2881 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Page 2882 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Field: ThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the bottom slab.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Page 2883 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.
    Page 2884 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fcConGirder
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the girder.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 - average.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Page 2885 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Page 2886 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Rating AASHTOLRFD07 11 - CBox2MinRebar-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: MomentSign
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The sign of moment for which min rebar is checked. 1-positive; 2-negative.
    Page 2887 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: fcpe
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compression stress in concrtete due to effective PT force only at extreme fiber of section
    where tensile stress is caused by externally applied loads.

    Field: Mdnc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Total unfactored dead load moment acting on the monolithic or noncomposite section.

    Field: fr
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of rupture.

    Field: Snc
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for the extreme fiber of the monolithic or nonncomposite section where
    tensile stress is casused by externally applied loads.

    Field: Sc
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for the extreme fiber of the composite section where tensile stress is
    casused by externally applied loads.

    Page 2888 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mcr120pc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    1.2 times cracking moment.

    Field: Mu133pc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    1.33 times the factored moment required by the applicable strength load combination.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment resitance (Mn*resistance factor).

    Field: MinRbrOK
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Indicates whether is AASHTO LRFD Section 5.3.3.2. satisfied. 0-No; 1-Yes;2-Not
    Applicable.
    Table: Bridge Super Rating AASHTOLRFD07 12 - CBox2Shear-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2889 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section Nu and Vp to obtain girder Nu and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Page 2890 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WebWidthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective girder web width per AASHTO section 5.8.2.9.

    Field: Ec
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of concrete.

    Field: fc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of concrete.

    Field: EsRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of reinforcement.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.

    Field: sxe
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Crack spacing parameter per 5.8.3.4.2-5.
    Table: Bridge Super Rating AASHTOLRFD07 13 - CBox2Shear-Result
    Page 2891 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Page 2892 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlVn
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the shear resistance Vn.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear force.

    Field: Nu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored axial force (positive if tensile).

    Field: Mu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth from extreme compression fiber to the centroid of the tensile force in the
    tensile reinforcement.

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth.
    Page 2893 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaPTLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal prestressed tendons on the tension flexural side of girder.

    Field: ARebarLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal reinforcement on the tension flexural side of girder.

    Field: Fpo
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    A parameter taken as modulus of elasticity of prestressing tendons multiplied by the
    locked-in difference in strain between the prestressing tendons and the surrounding
    concrete. Calculated as 0.7fpu per 5.8.3.4.2-4.

    Field: Ept
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average modulus of elasticity of prestressing tendons on the tension flexural side of
    girder.

    Field: AreaConc
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of concrete on the flexural tension side of the member. (Figure 5.8.3.4.2-1).

    Field: EpsilonS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strain in nonprestressed longitudinal tension reinforcement. per eq. 5.8.3.4.2-4.

    Page 2894 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BetaFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor indicating ability of diagonally cracked concrete to transmit tension and shear per
    5.8.3.4.2-2.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle of inclination of diagonal compressive stresses per 5.8.3.4.2-3.

    Field: AsVProvPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Provided area of transverse shear reinforcement per unit length.

    Field: AsVMinPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1.

    Field: AsvFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1 provided?
    Yes=1, No=0.

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance (eq. 5.8.3.3-3).

    Page 2895 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Transverse reinforcement shear resistance (eq. 5.8.3.3-4).

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of the effective prestressing force. If same
    sign as Vu then the component is resisting the applied shear.

    Field: Vn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Nominal shear resistance per 5.8.3.3-1 excluding Vp contribution.
    Table: Bridge Super Rating AASHTOLRFD07 14 - CBox2Shear-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2896 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: V2DC
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DC Combo.

    Field: V2DW
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DW Combo.

    Page 2897 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V2P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from P Combo.

    Field: V2LLIM
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resitance (Vn*resistance factor).

    Field: Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTOLRFD07 15 - PCCompFlexure-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.
    Page 2898 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: MnPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for positive moment.

    Field: MnNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for negative moment.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Page 2899 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Page 2900 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: AreaSlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WdthSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: ThBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam top flange.

    Field: WdthBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam top flange.

    Page 2901 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WdthBeamWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam web.

    Field: ThBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam bottom flange.

    Field: WdthBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam bottom flange.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).
    Page 2902 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Page 2903 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fcConcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the beam.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlkFactPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 . For positive moment.

    Field: BlkFactNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 . For negative moment.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Page 2904 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Rating AASHTOLRFD07 16 - PCCompFlexure-Rating

    Page 2905 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Page 2906 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3P
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from P Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment resitance (Mn*resistance factor).

    Page 2907 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTOLRFD07 17 - PCCompMinRebar-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.
    Page 2908 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MnPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for positive moment.

    Field: MnNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for negative moment.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Page 2909 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: AreaSlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Page 2910 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WdthSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: ThBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam top flange.

    Field: WdthBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam top flange.

    Field: WdthBeamWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam web.

    Field: ThBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam bottom flange.

    Field: WdthBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam bottom flange.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Page 2911 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.
    Page 2912 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: fcConcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the beam.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlkFactPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 . For positive moment.

    Page 2913 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BlkFactNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 . For negative moment.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Page 2914 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Rating AASHTOLRFD07 18 - PCCompMinRebar-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2915 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: MomentSign
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The sign of moment for which min rebar is checked. 1-positive; 2-negative.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: fcpe
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compression stress in concrtete due to effective PT force only at extreme fiber of section
    where tensile stress is caused by externally applied loads.

    Field: Mdnc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Total unfactored dead load moment acting on the monolithic or noncomposite section.

    Field: fr
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of rupture.
    Page 2916 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Snc
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for the extreme fiber of the monolithic or nonncomposite section where
    tensile stress is casused by externally applied loads.

    Field: Sc
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for the extreme fiber of the composite section where tensile stress is
    casused by externally applied loads.

    Field: Mcr120pc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    1.2 times cracking moment.

    Field: Mu133pc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    1.33 times the factored moment required by the applicable strength load combination.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment resitance (Mn*resistance factor).

    Field: MinRbrOK
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Indicates whether is AASHTO LRFD Section 5.3.3.2. satisfied. 0-No; 1-Yes;2-Not
    Applicable.
    Table: Bridge Super Rating AASHTOLRFD07 19 - PCCompShear-Prop

    Page 2917 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Page 2918 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section Nu and Vp to obtain girder Nu and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: EcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of beam concrete.

    Field: fcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of beam concrete.

    Field: EsRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of reinforcement.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.

    Page 2919 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: sxe
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Crack spacing parameter per 5.8.3.4.2-5.
    Table: Bridge Super Rating AASHTOLRFD07 20 - PCCompShear-Result

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.
    Page 2920 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlVn
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the shear resistance Vn.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear force.

    Field: Nu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored axial force (positive if tensile).

    Field: Mu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth from extreme compression fiber to the centroid of the tensile force in the
    tensile reinforcement.
    Page 2921 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth.

    Field: AreaPTLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal prestressed tendons on the tension flexural side of girder.

    Field: ARebarLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal reinforcement on the tension flexural side of girder.

    Field: Fpo
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    A parameter taken as modulus of elasticity of prestressing tendons multiplied by the
    locked-in difference in strain between the prestressing tendons and the surrounding
    concrete. Calculated as 0.7fpu per 5.8.3.4.2-4.

    Field: Ept
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average modulus of elasticity of prestressing tendons on the tension flexural side of
    girder.

    Field: AreaConc
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of concrete on the flexural tension side of the member. (Figure 5.8.3.4.2-1).

    Page 2922 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EpsilonS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strain in nonprestressed longitudinal tension reinforcement. per eq. 5.8.3.4.2-4.

    Field: BetaFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor indicating ability of diagonally cracked concrete to transmit tension and shear per
    5.8.3.4.2-2.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle of inclination of diagonal compressive stresses per 5.8.3.4.2-3.

    Field: AsVProvPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Provided area of transverse shear reinforcement per unit length.

    Field: AsVMinPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1.

    Field: AsvFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1 provided?
    Yes=1, No=0.

    Page 2923 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance (eq. 5.8.3.3-3).

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Transverse reinforcement shear resistance (eq. 5.8.3.3-4).

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of the effective prestressing force. If same
    sign as Vu then the component is resisting the applied shear.

    Field: Vn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Nominal shear resistance per 5.8.3.3-1 excluding Vp contribution.
    Table: Bridge Super Rating AASHTOLRFD07 21 - PCCompShear-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2924 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: V2DC
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DC Combo.

    Page 2925 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V2DW
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DW Combo.

    Field: V2P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from P Combo.

    Field: V2LLIM
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resitance (Vn*resistance factor).

    Field: Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTOLRFD07 22 - SteelINonCompStrgth-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.
    Page 2926 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.
    Page 2927 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Page 2928 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.
    Page 2929 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: Rh
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor - 6.10.1.10.1.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Page 2930 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lp
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4 . Reported only if sign of M3 LLIM is negative.

    Field: Lr
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5..
    Reported only if sign of M3 LLIM is negative, otherwise set to zero.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.

    Field: DcpWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the plastic moment. Value set to zero when Appendix A
    not used.

    Field: DcWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for positive moment. Value set to zero when
    Appendix A not used.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment. Value set to zero when
    Appendix A not used.

    Page 2931 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SlndWebPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web slenderness classification for positive flexure.

    Field: SlndWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web slenderness classification for negative flexure.

    Field: RpcWebPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the top flange for positive moment. Value set to zero when
    Appendix A not used.

    Field: RptWebPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the bottom flange for positive moment. Value set to zero
    when Appendix A not used.

    Field: RpcWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the bottom flange for negative moment. Value set to zero
    when Appendix A not used.

    Field: RptWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the top flange for negative moment. Value set to zero when
    Appendix A not used.

    Page 2932 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: rt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment - A6.3.3-10.
    Value set to zero when Appendix A not used.

    Field: J
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    St. Venant torsional constant. Value set to zero when Appendix A not used.

    Field: Mp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam plastic moment capacity. Value set to zero when Appendix A not used.

    Field: MycPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam yield moment capacity with respect to compression flange in positive flexure.
    Value set to zero when Appendix A not used.

    Field: MytPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam yield moment capacity with respect to tension flange in positive flexure. Value
    set to zero when Appendix A not used.

    Field: MycNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam yield moment capacity with respect to compression flange in negative flexure.
    Value set to zero when Appendix A not used.

    Page 2933 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MytNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam yield moment capacity with respect to tension flange in negative flexure. Value
    set to zero when Appendix A not used.

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam factored moment resistance in positive flexure Value set to zero when
    Appendix A not used.

    Field: MrNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam factored moment resistance in negative flexure Value set to zero when
    Appendix A not used.

    Field: IsCurved
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bridge curved?.

    Field: UsedAppA
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Has Appendix A been used to derive negative moment capacity?.
    Table: Bridge Super Rating AASHTOLRFD07 23 - SteelINonCompStrgth-Flx

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Page 2934 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of tension flange when section 6.10.8
    used or to derive flexural resitance for positive moment when Appendix A was used.

    Field: CodeEqComp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of compression flange when section
    6.10.8 used or to derive flexural resitance for negative moment when Appendix A was
    used.

    Page 2935 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Page 2936 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuDCTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DC demand at the section cut calculated without the consideration
    of flange lateral bending. Compression when negative. Value set to zero when Appendix A
    used.

    Field: fbuDCBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DC demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuDWTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuDWBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuLLIMTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Page 2937 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuLLIMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: Fnc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange. Value set to zero when Appendix
    A used.

    Field: Fnt
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange. Value set to zero when Appendix A
    used.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored steel beam moment capacity. Value set to zero when Appendix A not used.

    Field: M3Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTOLRFD07 24 - SteelINonCompStrgth-Shr

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Page 2938 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Page 2939 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: V2DC
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DC Combo.

    Field: V2DW
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DW Combo.

    Field: V2LLIM
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Page 2940 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear buckling resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Plastic shear force.

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear buckling resistance to shear yield strength.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coefficient.

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: V2Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTOLRFD07 25 - SteelINonCompServ-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.
    Page 2941 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.
    Page 2942 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Page 2943 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: Rh
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor - 6.10.1.10.1.

    Page 2944 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.
    Table: Bridge Super Rating AASHTOLRFD07 26 - SteelINonCompServ-Flx

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2945 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of tension flange when section 6.10.8
    used or to derive flexural resitance for positive moment when Appendix A was used.

    Field: CodeEqComp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of compression flange when section
    6.10.8 used or to derive flexural resitance for negative moment when Appendix A was
    used.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Page 2946 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: fbuDCTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DC demand at the section cut calculated without the consideration
    of flange lateral bending. Compression when negative. Value set to zero when Appendix A
    used.

    Field: fbuDCBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DC demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuDWTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Page 2947 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuDWBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuLLIMTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuLLIMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: Fnc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange. Value set to zero when Appendix
    A used.

    Field: Fnt
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange. Value set to zero when Appendix A
    used.

    Field: M3Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Page 2948 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Bridge Super Rating AASHTOLRFD07 27 - SteelICompStrgth-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Page 2949 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the slab.

    Page 2950 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longterm Modular Ratio.

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Page 2951 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Page 2952 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.

    Field: kcFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Bottom flange local buckling coefficient - A6.3.2-6.
    Page 2953 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the negative plastic moment.

    Page 2954 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LamwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of the web based on elastic negative moment - A6.2.2.

    Field: LampwDcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dc/tw for negative
    moment - A6.2.2.

    Field: LampwDcpWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dcp/tw for negative
    moment - A6.2.1.

    Field: LamrwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact web for negative moment - 6.10.1.10.2.

    Field: CmpctWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is web compact for negative moment?.

    Field: RpcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the bottom flange for negative moment. Reported only when
    Appendix A applied in the design.

    Page 2955 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RptWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the top flange for negative moment. Reported only when
    Appendix A applied in the design.

    Field: rt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment.6.10.8.2.3-9.

    Field: J
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    St. Venant torsional constant. Reported only when Appendix A applied in the design.

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for positive moment - 6.10.1.6.

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for negative moment - 6.10.1.6.

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for positive moment - 6.10.1.10.1.

    Page 2956 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for negative moment - 6.10.1.10.1.

    Field: CmpctGrdPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for positive moment?.

    Field: CmpctGrdNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for negative moment?.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.

    Page 2957 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Page 2958 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Field: PNADistLmt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limit on distance to plastic neutral axis for positive moment per 6.10.7.3-1.

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Page 2959 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for positive moment.

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section controlling yield moment capacity for negative moment.

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the bottom flange.

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the top flange.

    Field: Lp
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: Lr
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5 or
    A6.3.3-5.

    Page 2960 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.

    Field: BeamPBklShr
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not steel beam is proportioned to develop postbuckling shear resistance (eq.
    6.10.9.3.2-1).

    Field: IsCurved
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bridge curved?.

    Field: UsedAppA
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Has Appendix A been used to derive negative moment capacity?.
    Table: Bridge Super Rating AASHTOLRFD07 28 - SteelICompStrgth-Flx

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 2961 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of tension flange when section 6.10.8
    used or to derive flexural resitance for positive moment when Appendix A was used.

    Field: CodeEqComp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of compression flange when section
    6.10.8 used or to derive flexural resitance for negative moment when Appendix A was
    used.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Page 2962 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Page 2963 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuDCTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DC demand at the section cut calculated without the consideration
    of flange lateral bending. Compression when negative. Value set to zero when Appendix A
    used.

    Field: fbuDCBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DC demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuDWTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuDWBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: flDCDWBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress due to DC+DW loads.

    Field: fdeckDCDW
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top of concrete deck compression stress due to DC+DW loads.
    Page 2964 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuLLIMTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuLLIMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: flLLIMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress due to LLIM loads.

    Field: fdeckLLIM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top of concrete deck compression stress due to LLIM loads.

    Field: Fnc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange. Value set to zero when Appendix
    A used.

    Field: Fnt
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange. Value set to zero when Appendix A
    used.

    Page 2965 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored steel beam moment capacity. Value set to zero when Appendix A not used.

    Field: M3Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTOLRFD07 29 - SteelICompStrgth-Shr

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2966 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: V2DC
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DC Combo.

    Field: V2DW
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DW Combo.

    Page 2967 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V2LLIM
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear buckling resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Plastic shear force.

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear buckling resistance to shear yield strength.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coefficient.

    Page 2968 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: V2Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTOLRFD07 30 - SteelICompServ-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 2969 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.
    Page 2970 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longterm Modular Ratio.

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Page 2971 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Page 2972 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.
    Page 2973 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kcFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Bottom flange local buckling coefficient - A6.3.2-6.

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Page 2974 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the negative plastic moment.

    Field: LamwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of the web based on elastic negative moment - A6.2.2.

    Field: LampwDcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dc/tw for negative
    moment - A6.2.2.

    Field: LampwDcpWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dcp/tw for negative
    moment - A6.2.1.

    Field: LamrwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact web for negative moment - 6.10.1.10.2.

    Field: CmpctWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is web compact for negative moment?.

    Page 2975 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RpcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the bottom flange for negative moment. Reported only when
    Appendix A applied in the design.

    Field: RptWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the top flange for negative moment. Reported only when
    Appendix A applied in the design.

    Field: rt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment.6.10.8.2.3-9.

    Field: J
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    St. Venant torsional constant. Reported only when Appendix A applied in the design.

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for positive moment - 6.10.1.6.

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for negative moment - 6.10.1.6.

    Page 2976 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for positive moment - 6.10.1.10.1.

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for negative moment - 6.10.1.10.1.

    Field: CmpctGrdPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for positive moment?.

    Field: CmpctGrdNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for negative moment?.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.
    Page 2977 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Page 2978 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Field: PNADistLmt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limit on distance to plastic neutral axis for positive moment per 6.10.7.3-1.

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Page 2979 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for positive moment.

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section controlling yield moment capacity for negative moment.

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the bottom flange.

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the top flange.

    Field: Lp
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: Lr
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5 or
    A6.3.3-5.

    Page 2980 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.

    Field: BeamPBklShr
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not steel beam is proportioned to develop postbuckling shear resistance (eq.
    6.10.9.3.2-1).
    Table: Bridge Super Rating AASHTOLRFD07 31 - SteelICompServ-Flx

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 2981 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of tension flange when section 6.10.8
    used or to derive flexural resitance for positive moment when Appendix A was used.

    Field: CodeEqComp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of compression flange when section
    6.10.8 used or to derive flexural resitance for negative moment when Appendix A was
    used.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Page 2982 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: fbuDCTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DC demand at the section cut calculated without the consideration
    of flange lateral bending. Compression when negative. Value set to zero when Appendix A
    used.

    Field: fbuDCBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DC demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Page 2983 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuDWTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuDWBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: flDCDWBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress due to DC+DW loads.

    Field: fdeckDCDW
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top of concrete deck compression stress due to DC+DW loads.

    Field: fbuLLIMTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuLLIMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.
    Page 2984 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: flLLIMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress due to LLIM loads.

    Field: fdeckLLIM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top of concrete deck compression stress due to LLIM loads.

    Field: Fnc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange. Value set to zero when Appendix
    A used.

    Field: Fnt
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange. Value set to zero when Appendix A
    used.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored steel beam moment capacity. Value set to zero when Appendix A not used.

    Field: M3Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTORATE11 01 - CBoxFlexure-Prop

    Page 2985 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: MnPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for positive moment.

    Field: MnNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for negative moment.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Page 2986 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Page 2987 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Page 2988 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the bottom slab.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).
    Page 2989 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Section concrete strength f'c.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Page 2990 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 - average.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.
    Page 2991 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Rating AASHTORATE11 02 - CBoxFlexure-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 2992 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3P
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from P Combo.

    Page 2993 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment resitance (Mn*resistance factor).

    Field: Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTORATE11 03 - CBoxMinRebar-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.
    Page 2994 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: MnPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for positive moment.

    Field: MnNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for negative moment.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Page 2995 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Page 2996 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Field: ThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the bottom slab.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Page 2997 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.
    Page 2998 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Section concrete strength f'c.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 - average.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Page 2999 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Page 3000 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Rating AASHTORATE11 04 - CBoxMinRebar-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: MomentSign
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The sign of moment for which min rebar is checked. 1-positive; 2-negative.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.
    Page 3001 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fcpe
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compression stress in concrtete due to effective PT force only at extreme fiber of section
    where tensile stress is caused by externally applied loads.

    Field: Mdnc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Total unfactored dead load moment acting on the monolithic or noncomposite section.

    Field: fr
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of rupture.

    Field: Snc
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for the extreme fiber of the monolithic or nonncomposite section where
    tensile stress is casused by externally applied loads.

    Field: Sc
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for the extreme fiber of the composite section where tensile stress is
    casused by externally applied loads.

    Field: Mcr120pc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    1.2 times cracking moment.

    Page 3002 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mu133pc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    1.33 times the factored moment required by the applicable strength load combination.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment resitance (Mn*resistance factor).

    Field: MinRbrOK
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Indicates whether is AASHTO LRFD Section 5.3.3.2. satisfied. 0-No; 1-Yes;2-Not
    Applicable.
    Table: Bridge Super Rating AASHTORATE11 08 - CBox2Flexure-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 3003 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: MnPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for positive moment.

    Field: MnNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for negative moment.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Page 3004 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.
    Page 3005 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Field: ThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the bottom slab.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Page 3006 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.
    Page 3007 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fcConGirder
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the girder.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 - average.

    Page 3008 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Page 3009 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Rating AASHTORATE11 09 - CBox2Flexure-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 3010 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3P
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from P Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Page 3011 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment resitance (Mn*resistance factor).

    Field: Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTORATE11 10 - CBox2MinRebar-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.
    Page 3012 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: MnPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for positive moment.

    Field: MnNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for negative moment.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Page 3013 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.
    Page 3014 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ASlabTriTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the top slab.

    Field: ThSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the top slab.

    Field: WSlabEffTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the top slab.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the web.

    Field: ASlabTriBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the bottom slab.

    Field: ThSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the bottom slab.

    Field: WSlabEffBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the bottom slab.

    Page 3015 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.
    Page 3016 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fcConGirder
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the girder.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlockFactor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 - average.

    Page 3017 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Page 3018 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Rating AASHTORATE11 11 - CBox2MinRebar-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 3019 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MomentSign
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The sign of moment for which min rebar is checked. 1-positive; 2-negative.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: fcpe
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compression stress in concrtete due to effective PT force only at extreme fiber of section
    where tensile stress is caused by externally applied loads.

    Field: Mdnc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Total unfactored dead load moment acting on the monolithic or noncomposite section.

    Field: fr
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of rupture.

    Field: Snc
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for the extreme fiber of the monolithic or nonncomposite section where
    tensile stress is casused by externally applied loads.

    Page 3020 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Sc
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for the extreme fiber of the composite section where tensile stress is
    casused by externally applied loads.

    Field: Mcr120pc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    1.2 times cracking moment.

    Field: Mu133pc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    1.33 times the factored moment required by the applicable strength load combination.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment resitance (Mn*resistance factor).

    Field: MinRbrOK
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Indicates whether is AASHTO LRFD Section 5.3.3.2. satisfied. 0-No; 1-Yes;2-Not
    Applicable.
    Table: Bridge Super Rating AASHTORATE11 12 - CBox2Shear-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Page 3021 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section Nu and Vp to obtain girder Nu and Vp.

    Page 3022 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: WebWidthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective girder web width per AASHTO section 5.8.2.9.

    Field: Ec
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of concrete.

    Field: fc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of concrete.

    Field: EsRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of reinforcement.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.

    Page 3023 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: sxe
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Crack spacing parameter per 5.8.3.4.2-5.
    Table: Bridge Super Rating AASHTORATE11 13 - CBox2Shear-Result

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.
    Page 3024 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlVn
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the shear resistance Vn.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear force.

    Field: Nu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored axial force (positive if tensile).

    Field: Mu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth from extreme compression fiber to the centroid of the tensile force in the
    tensile reinforcement.
    Page 3025 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth.

    Field: AreaPTLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal prestressed tendons on the tension flexural side of girder.

    Field: ARebarLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal reinforcement on the tension flexural side of girder.

    Field: Fpo
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    A parameter taken as modulus of elasticity of prestressing tendons multiplied by the
    locked-in difference in strain between the prestressing tendons and the surrounding
    concrete. Calculated as 0.7fpu per 5.8.3.4.2-4.

    Field: Ept
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average modulus of elasticity of prestressing tendons on the tension flexural side of
    girder.

    Field: AreaConc
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of concrete on the flexural tension side of the member. (Figure 5.8.3.4.2-1).

    Page 3026 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EpsilonS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strain in nonprestressed longitudinal tension reinforcement. per eq. 5.8.3.4.2-4.

    Field: BetaFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor indicating ability of diagonally cracked concrete to transmit tension and shear per
    5.8.3.4.2-2.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle of inclination of diagonal compressive stresses per 5.8.3.4.2-3.

    Field: AsVProvPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Provided area of transverse shear reinforcement per unit length.

    Field: AsVMinPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1.

    Field: AsvFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1 provided?
    Yes=1, No=0.

    Page 3027 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance (eq. 5.8.3.3-3).

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Transverse reinforcement shear resistance (eq. 5.8.3.3-4).

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of the effective prestressing force. If same
    sign as Vu then the component is resisting the applied shear.

    Field: Vn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Nominal shear resistance per 5.8.3.3-1 excluding Vp contribution.
    Table: Bridge Super Rating AASHTORATE11 14 - CBox2Shear-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 3028 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: V2DC
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DC Combo.

    Page 3029 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V2DW
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DW Combo.

    Field: V2P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from P Combo.

    Field: V2LLIM
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resitance (Vn*resistance factor).

    Field: Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTORATE11 15 - PCCompFlexure-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.
    Page 3030 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: MnPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for positive moment.

    Field: MnNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for negative moment.

    Page 3031 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Page 3032 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: AreaSlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WdthSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: ThBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam top flange.

    Page 3033 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WdthBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam top flange.

    Field: WdthBeamWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam web.

    Field: ThBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam bottom flange.

    Field: WdthBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam bottom flange.

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.
    Page 3034 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Page 3035 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: fcConcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the beam.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Field: BlkFactPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 . For positive moment.

    Field: BlkFactNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 . For negative moment.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Page 3036 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Page 3037 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Rating AASHTORATE11 16 - PCCompFlexure-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.
    Page 3038 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3P
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from P Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Page 3039 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment resitance (Mn*resistance factor).

    Field: Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTORATE11 17 - PCCompMinRebar-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 3040 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: MnPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for positive moment.

    Field: MnNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Nominal resistance for negative moment.

    Field: AreaPTTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top prestress tendons.

    Field: AreaPTBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom prestress tendons.

    Field: CGPTTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    above the bottom compression zone. If the value is negative, the centroid of the tendons is
    located below the centroid of the section.

    Page 3041 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CGPTBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those tendons that are located
    below the top compression zone. If the value is negative, the centroid of the tendons is
    located above the centroid of the section.

    Field: AreaRebTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement.

    Field: AreaRebBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement.

    Field: CGRebTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    above the bottom compression zone. If the value is negative, the centroid of the rebars is
    located below the centroid of the section.

    Field: CGRebBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the centroid (CG) of section to the centroid of those rebars that are located
    below the top compression zone. If the value is negative, the centroid of the rebars is
    located above the centroid of the section.

    Field: AreaSlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Page 3042 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WdthSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: ThBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam top flange.

    Field: WdthBeamTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam top flange.

    Field: WdthBeamWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam web.

    Field: ThBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the beam bottom flange.

    Field: WdthBeamBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Width of the beam bottom flange.

    Page 3043 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthGirder
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of the composite girder.

    Field: CGFibTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the topmost point of the bridge section at this station.

    Field: CGFibBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from centroid of section to the bottommost point of the bridge section at this
    station.

    Field: EqFpuTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of top prestress tendons (weighted average).

    Field: EqFpuBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fpu - specified tensile strength of bottom prestress tendons (weighted average).

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: fsLRebarPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for positive moment.
    Page 3044 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fsLRebarNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Stress in longitudinal rebar located in tensile zone for negative moment.

    Field: kFactorTop
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 top.

    Field: kFactorBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    k - per eq. 5.7.3.1.1-2 bottom.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: fcConcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the beam.

    Field: TSectForPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for positive moment?.

    Field: TSectForNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is section T section for negative moment?.

    Page 3045 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BlkFactPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 . For positive moment.

    Field: BlkFactNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Stress block factor beta per 5.7.2.2 . For negative moment.

    Field: cDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face positive.

    Field: cDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    c - distance between the neutral axis and the compressive face negative.

    Field: aDistForPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth positive.

    Field: aDistForNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    a - Compression block depth negative.

    Field: aLocPos
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for positive moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.
    Page 3046 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: aLocNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Extend of a compression block for negative moment Within Composite Slab = 0; Within
    Flange = 1; Into Web = 2; At Web End = 3.

    Field: EqFpsForPos
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-1) positive.

    Field: EqFpsForNeg
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    fps - average stress in the prestressing steel (eq. 5.7.3.1.1-2) negative.
    Table: Bridge Super Rating AASHTORATE11 18 - PCCompMinRebar-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Page 3047 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: MomentSign
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The sign of moment for which min rebar is checked. 1-positive; 2-negative.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: fcpe
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Compression stress in concrtete due to effective PT force only at extreme fiber of section
    where tensile stress is caused by externally applied loads.

    Field: Mdnc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Total unfactored dead load moment acting on the monolithic or noncomposite section.

    Field: fr
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of rupture.
    Page 3048 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Snc
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for the extreme fiber of the monolithic or nonncomposite section where
    tensile stress is casused by externally applied loads.

    Field: Sc
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for the extreme fiber of the composite section where tensile stress is
    casused by externally applied loads.

    Field: Mcr120pc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    1.2 times cracking moment.

    Field: Mu133pc
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    1.33 times the factored moment required by the applicable strength load combination.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment resitance (Mn*resistance factor).

    Field: MinRbrOK
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Indicates whether is AASHTO LRFD Section 5.3.3.2. satisfied. 0-No; 1-Yes;2-Not
    Applicable.
    Table: Bridge Super Rating AASHTORATE11 19 - PCCompShear-Prop

    Page 3049 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Page 3050 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactSect
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Distribution factor applied to entire section Nu and Vp to obtain girder Nu and Vp.

    Field: WebWidth
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    The girder gross web width.

    Field: EcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of beam concrete.

    Field: fcBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of beam concrete.

    Field: EsRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Modulus of elasticity of reinforcement.

    Field: fysVRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of transverse shear rebar.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal shear rebar.

    Page 3051 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: sxe
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Crack spacing parameter per 5.8.3.4.2-5.
    Table: Bridge Super Rating AASHTORATE11 20 - PCCompShear-Result

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Combo for these values.
    Page 3052 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Step
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for these values.

    Field: DSet
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Demand set for these values.

    Field: CtrlVn
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not this combo controls the shear resistance Vn.

    Field: Vu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear force.

    Field: Nu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored axial force (positive if tensile).

    Field: Mu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored moment.

    Field: DepthEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective depth from extreme compression fiber to the centroid of the tensile force in the
    tensile reinforcement.
    Page 3053 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DepthEffV
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective shear depth.

    Field: AreaPTLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal prestressed tendons on the tension flexural side of girder.

    Field: ARebarLong
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of longitudinal reinforcement on the tension flexural side of girder.

    Field: Fpo
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    A parameter taken as modulus of elasticity of prestressing tendons multiplied by the
    locked-in difference in strain between the prestressing tendons and the surrounding
    concrete. Calculated as 0.7fpu per 5.8.3.4.2-4.

    Field: Ept
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Average modulus of elasticity of prestressing tendons on the tension flexural side of
    girder.

    Field: AreaConc
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of concrete on the flexural tension side of the member. (Figure 5.8.3.4.2-1).

    Page 3054 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EpsilonS
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Strain in nonprestressed longitudinal tension reinforcement. per eq. 5.8.3.4.2-4.

    Field: BetaFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Factor indicating ability of diagonally cracked concrete to transmit tension and shear per
    5.8.3.4.2-2.

    Field: ThetaAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    Angle of inclination of diagonal compressive stresses per 5.8.3.4.2-3.

    Field: AsVProvPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Provided area of transverse shear reinforcement per unit length.

    Field: AsVMinPerL
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    Minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1.

    Field: AsvFlag
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is minimum area of transverse shear reinforcement per unit length per 5.8.2.5-1 provided?
    Yes=1, No=0.

    Page 3055 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vc
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Concrete shear resistance (eq. 5.8.3.3-3).

    Field: Vs
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Transverse reinforcement shear resistance (eq. 5.8.3.3-4).

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Component in the direction of the applied shear of the effective prestressing force. If same
    sign as Vu then the component is resisting the applied shear.

    Field: Vn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Nominal shear resistance per 5.8.3.3-1 excluding Vp contribution.
    Table: Bridge Super Rating AASHTORATE11 21 - PCCompShear-Rating

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 3056 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: V2DC
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DC Combo.

    Page 3057 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V2DW
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DW Combo.

    Field: V2P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from P Combo.

    Field: V2LLIM
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resitance (Vn*resistance factor).

    Field: Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTORATE11 22 - SteelINonCompStrgth-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.
    Page 3058 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.
    Page 3059 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Page 3060 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.
    Page 3061 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: Rh
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor - 6.10.1.10.1.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Page 3062 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lp
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4 . Reported only if sign of M3 LLIM is negative.

    Field: Lr
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5..
    Reported only if sign of M3 LLIM is negative, otherwise set to zero.

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.

    Field: DcpWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the plastic moment. Value set to zero when Appendix A
    not used.

    Field: DcWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for positive moment. Value set to zero when
    Appendix A not used.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment. Value set to zero when
    Appendix A not used.

    Page 3063 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SlndWebPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web slenderness classification for positive flexure.

    Field: SlndWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web slenderness classification for negative flexure.

    Field: RpcWebPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the top flange for positive moment. Value set to zero when
    Appendix A not used.

    Field: RptWebPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the bottom flange for positive moment. Value set to zero
    when Appendix A not used.

    Field: RpcWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the bottom flange for negative moment. Value set to zero
    when Appendix A not used.

    Field: RptWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the top flange for negative moment. Value set to zero when
    Appendix A not used.

    Page 3064 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: rt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment - A6.3.3-10.
    Value set to zero when Appendix A not used.

    Field: J
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    St. Venant torsional constant. Value set to zero when Appendix A not used.

    Field: Mp
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam plastic moment capacity. Value set to zero when Appendix A not used.

    Field: MycPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam yield moment capacity with respect to compression flange in positive flexure.
    Value set to zero when Appendix A not used.

    Field: MytPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam yield moment capacity with respect to tension flange in positive flexure. Value
    set to zero when Appendix A not used.

    Field: MycNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam yield moment capacity with respect to compression flange in negative flexure.
    Value set to zero when Appendix A not used.

    Page 3065 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MytNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam yield moment capacity with respect to tension flange in negative flexure. Value
    set to zero when Appendix A not used.

    Field: MrPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam factored moment resistance in positive flexure Value set to zero when
    Appendix A not used.

    Field: MrNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Steel beam factored moment resistance in negative flexure Value set to zero when
    Appendix A not used.

    Field: IsCurved
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bridge curved?.

    Field: UsedAppA
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Has Appendix A been used to derive negative moment capacity?.
    Table: Bridge Super Rating AASHTORATE11 23 - SteelINonCompStrgth-Flx

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Page 3066 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of tension flange when section 6.10.8
    used or to derive flexural resitance for positive moment when Appendix A was used.

    Field: CodeEqComp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of compression flange when section
    6.10.8 used or to derive flexural resitance for negative moment when Appendix A was
    used.

    Page 3067 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Page 3068 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuDCTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DC demand at the section cut calculated without the consideration
    of flange lateral bending. Compression when negative. Value set to zero when Appendix A
    used.

    Field: fbuDCBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DC demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuDWTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuDWBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuLLIMTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Page 3069 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuLLIMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: Fnc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange. Value set to zero when Appendix
    A used.

    Field: Fnt
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange. Value set to zero when Appendix A
    used.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored steel beam moment capacity. Value set to zero when Appendix A not used.

    Field: M3Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTORATE11 24 - SteelINonCompStrgth-Shr

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Page 3070 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Page 3071 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: V2DC
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DC Combo.

    Field: V2DW
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DW Combo.

    Field: V2LLIM
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Page 3072 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear buckling resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Plastic shear force.

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear buckling resistance to shear yield strength.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coefficient.

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: V2Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTORATE11 25 - SteelINonCompServ-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.
    Page 3073 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.
    Page 3074 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Page 3075 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: Rh
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor - 6.10.1.10.1.

    Page 3076 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.
    Table: Bridge Super Rating AASHTORATE11 26 - SteelINonCompServ-Flx

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 3077 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of tension flange when section 6.10.8
    used or to derive flexural resitance for positive moment when Appendix A was used.

    Field: CodeEqComp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of compression flange when section
    6.10.8 used or to derive flexural resitance for negative moment when Appendix A was
    used.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Page 3078 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: fbuDCTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DC demand at the section cut calculated without the consideration
    of flange lateral bending. Compression when negative. Value set to zero when Appendix A
    used.

    Field: fbuDCBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DC demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuDWTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Page 3079 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuDWBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuLLIMTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuLLIMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: Fnc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange. Value set to zero when Appendix
    A used.

    Field: Fnt
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange. Value set to zero when Appendix A
    used.

    Field: M3Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Page 3080 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Bridge Super Rating AASHTORATE11 27 - SteelICompStrgth-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Page 3081 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the slab.

    Page 3082 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longterm Modular Ratio.

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Page 3083 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Page 3084 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.

    Field: kcFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Bottom flange local buckling coefficient - A6.3.2-6.
    Page 3085 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the negative plastic moment.

    Page 3086 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: LamwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of the web based on elastic negative moment - A6.2.2.

    Field: LampwDcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dc/tw for negative
    moment - A6.2.2.

    Field: LampwDcpWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dcp/tw for negative
    moment - A6.2.1.

    Field: LamrwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact web for negative moment - 6.10.1.10.2.

    Field: CmpctWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is web compact for negative moment?.

    Field: RpcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the bottom flange for negative moment. Reported only when
    Appendix A applied in the design.

    Page 3087 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RptWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the top flange for negative moment. Reported only when
    Appendix A applied in the design.

    Field: rt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment.6.10.8.2.3-9.

    Field: J
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    St. Venant torsional constant. Reported only when Appendix A applied in the design.

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for positive moment - 6.10.1.6.

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for negative moment - 6.10.1.6.

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for positive moment - 6.10.1.10.1.

    Page 3088 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for negative moment - 6.10.1.10.1.

    Field: CmpctGrdPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for positive moment?.

    Field: CmpctGrdNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for negative moment?.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.

    Page 3089 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Page 3090 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Field: PNADistLmt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limit on distance to plastic neutral axis for positive moment per 6.10.7.3-1.

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Page 3091 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for positive moment.

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section controlling yield moment capacity for negative moment.

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the bottom flange.

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the top flange.

    Field: Lp
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: Lr
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5 or
    A6.3.3-5.

    Page 3092 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.

    Field: BeamPBklShr
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not steel beam is proportioned to develop postbuckling shear resistance (eq.
    6.10.9.3.2-1).

    Field: IsCurved
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bridge curved?.

    Field: UsedAppA
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Has Appendix A been used to derive negative moment capacity?.
    Table: Bridge Super Rating AASHTORATE11 28 - SteelICompStrgth-Flx

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Page 3093 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of tension flange when section 6.10.8
    used or to derive flexural resitance for positive moment when Appendix A was used.

    Field: CodeEqComp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of compression flange when section
    6.10.8 used or to derive flexural resitance for negative moment when Appendix A was
    used.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Page 3094 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Page 3095 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuDCTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DC demand at the section cut calculated without the consideration
    of flange lateral bending. Compression when negative. Value set to zero when Appendix A
    used.

    Field: fbuDCBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DC demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuDWTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuDWBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: flDCDWBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress due to DC+DW loads.

    Field: fdeckDCDW
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top of concrete deck compression stress due to DC+DW loads.
    Page 3096 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuLLIMTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuLLIMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: flLLIMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress due to LLIM loads.

    Field: fdeckLLIM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top of concrete deck compression stress due to LLIM loads.

    Field: Fnc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange. Value set to zero when Appendix
    A used.

    Field: Fnt
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange. Value set to zero when Appendix A
    used.

    Page 3097 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored steel beam moment capacity. Value set to zero when Appendix A not used.

    Field: M3Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTORATE11 29 - SteelICompStrgth-Shr

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 3098 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance.

    Field: PanelType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Web panel type per 6.10.9.1 classified based on location and stiffener spacing.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Field: V2DC
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DC Combo.

    Field: V2DW
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from DW Combo.

    Page 3099 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: V2LLIM
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: Vr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Factored shear resistance.

    Field: Vcr
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Shear buckling resistance.

    Field: Vp
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    Plastic shear force.

    Field: C
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Ratio of shear buckling resistance to shear yield strength.

    Field: k
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Shear buckling coefficient.

    Page 3100 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: d0
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    Provided transverse stiffener spacing.

    Field: V2Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Bridge Super Rating AASHTORATE11 30 - SteelICompServ-Prop

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.
    Page 3101 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: BeamProp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Name of steel beam frame section property. If non-prismatic and section cut falls within a
    segment the name reflects properties at two ends of segment.

    Field: LLDFactM
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for moment.

    Field: LLDFactV
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Live load distribution factor for shear.

    Field: ASlabTri
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Tributary area of the composite slab.

    Field: ThSlab
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Thickness of the composite slab.

    Field: WSlabEff
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective width of the composite slab.

    Field: fcConcSlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Concrete strength f'c of the slab.
    Page 3102 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ESlab
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the slab.

    Field: nLongTerm
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Longterm Modular Ratio.

    Field: ARebSlabTop
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of top reinforcement in slab.

    Field: ARebSlabBot
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Area of bottom reinforcement in slab.

    Field: YRebSlabTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from the top of slab to the centroid of top layer of rebar in slab.

    Field: YRebSlabBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance from top of slab to the centroid of bottom layer of rebar in slab.

    Field: fysLRebar
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Strength of longitudinal rebar.

    Page 3103 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ABeam
    Field is Imported: No
    Format: Area (Section Dimensions section of form)
    Units: Length2
    Beam area.

    Field: EBeam
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Youngs modulus of the beam.

    Field: IxBeam
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    Beam moment of inertia about horizontal centroidal axis.

    Field: BeamRolled
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is beam rolled section?.

    Field: ThFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange thickness.

    Field: WdthFlgTop
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam top flange width.

    Field: fyFlgTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam top flange yield strength fy.

    Page 3104 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ThFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange thickness.

    Field: WdthFlgBot
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam botom flange width.

    Field: fyFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange yield strength fy.

    Field: fyrFlgBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam bottom flange stress at the onset of nominal yielding within the cross section,
    including residual stress effects, but not including compression flange lateral bending.

    Field: LamfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of bottom flange - A6.3.2-3.

    Field: LampfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact bottom flange - A6.3.2-4.

    Field: LamrfFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact bottom flange - 6.10.8.2.2-5 or A6.3.2-5.
    Page 3105 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: kcFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Bottom flange local buckling coefficient - A6.3.2-6.

    Field: CmpctFlgBot
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is bottom flange compact for negative moment?.

    Field: DepthWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web depth.

    Field: ThickWeb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Beam web thickness.

    Field: fyWeb
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Beam web yield strength fy.

    Field: DcpWebPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the positive plastic moment.

    Field: DcWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression in elastic range for negative moment.

    Page 3106 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DcpWebNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Depth of web in compression at the negative plastic moment.

    Field: LamwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Slenderness ratio of the web based on elastic negative moment - A6.2.2.

    Field: LampwDcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dc/tw for negative
    moment - A6.2.2.

    Field: LampwDcpWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a compact web corresponding to 2Dcp/tw for negative
    moment - A6.2.1.

    Field: LamrwWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Limiting slenderness ratio for a noncompact web for negative moment - 6.10.1.10.2.

    Field: CmpctWebNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is web compact for negative moment?.

    Page 3107 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RpcWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the bottom flange for negative moment. Reported only when
    Appendix A applied in the design.

    Field: RptWeb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web plastification factor for the top flange for negative moment. Reported only when
    Appendix A applied in the design.

    Field: rt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Effective radius of gyration for lateral torsional buckling for negative moment.6.10.8.2.3-9.

    Field: J
    Field is Imported: No
    Format: Length4 (Section Dimensions section of form)
    Units: Length4
    St. Venant torsional constant. Reported only when Appendix A applied in the design.

    Field: RbPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for positive moment - 6.10.1.6.

    Field: RbNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Web load-shedding factor for negative moment - 6.10.1.6.

    Page 3108 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: RhPos
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for positive moment - 6.10.1.10.1.

    Field: RhNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Hybrid factor for negative moment - 6.10.1.10.1.

    Field: CmpctGrdPos
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for positive moment?.

    Field: CmpctGrdNeg
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Is composite girder compact for negative moment?.

    Field: SxSteelBot
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at bottom fiber.

    Field: SxSteelTop
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for steel beam at top fiber.

    Field: SxLTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at
    bottom of steel beam.
    Page 3109 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: SxLTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed long term section for positive moment at top
    of steel beam.

    Field: SxSTermBPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at
    bottom of steel beam.

    Field: SxSTermTPos
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed short term section for positive moment at top
    of steel beam.

    Field: SxCompBNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at bottom of
    steel beam.

    Field: SxCompTNeg
    Field is Imported: No
    Format: Length3 (Section Dimensions section of form)
    Units: Length3
    Section modulus for composite transformed section for negative moment at top of steel
    beam.

    Field: MpPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for positive moment.

    Page 3110 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MpNeg
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section plastic moment capacity for negative moment.

    Field: PNADistPos
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for positive moment.

    Field: PNADistLmt
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limit on distance to plastic neutral axis for positive moment per 6.10.7.3-1.

    Field: PNADistNeg
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Distance to plastic neutral axis measured from top of composite slab for negative moment.

    Field: MuDNC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on non composite steel section used to derive section yield
    moment.

    Field: MuDCLTerm
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored demand moment on long term composite section used to derive section yield
    moment.

    Page 3111 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MyPos
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for positive moment.

    Field: MyNegCtr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section controlling yield moment capacity for negative moment.

    Field: MyNegBot
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the bottom flange.

    Field: MyNegTop
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Section yield moment capacity for negative moment with respect to the top flange.

    Field: Lp
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the nominal flexural resistance under uniform
    bending 6.10.8.2.3.-4 or A6.3.3-4.

    Field: Lr
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Limiting unbraced length to achieve the onset of nominal yielding in either flange under
    uniform bending with consideration of bottom flange residual stress effects 6.10.8.2.3-5 or
    A6.3.3-5.

    Page 3112 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Lb
    Field is Imported: No
    Format: Length (Section Dimensions section of form)
    Units: Length
    Unbraced length of bottom flange.

    Field: BeamPBklShr
    Field is Imported: No
    Format: Controlled by program
    Units: Yes/No
    Whether or not steel beam is proportioned to develop postbuckling shear resistance (eq.
    6.10.9.3.2-1).
    Table: Bridge Super Rating AASHTORATE11 31 - SteelICompServ-Flx

    Field: Request
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge rating request.

    Field: BridgeObj
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The name of a bridge object.

    Field: Station
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The station of the output section cut.

    Field: Location
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Whether the output is just before or just after this station.

    Page 3113 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Girder
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The girder name.

    Field: CodeEqn
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of tension flange when section 6.10.8
    used or to derive flexural resitance for positive moment when Appendix A was used.

    Field: CodeEqComp
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    LRFD equation that was used to derive resistance of compression flange when section
    6.10.8 used or to derive flexural resitance for negative moment when Appendix A was
    used.

    Field: CondFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Condition factor per 6.4.2.1 LRFR.

    Field: SystFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    System Factor per 6.4.2.1 LRFR.

    Field: ResistFact
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Resistance Factor per LRFD.

    Page 3114 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: M3DC
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DC Combo.

    Field: M3DW
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from DW Combo.

    Field: M3LLIM
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Moment demand from LLIM Combo.

    Field: LLStepType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Step for LLIM Combo values.

    Field: fbuDCTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DC demand at the section cut calculated without the consideration
    of flange lateral bending. Compression when negative. Value set to zero when Appendix A
    used.

    Field: fbuDCBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DC demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Page 3115 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: fbuDWTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuDWBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to DW demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: flDCDWBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress due to DC+DW loads.

    Field: fdeckDCDW
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top of concrete deck compression stress due to DC+DW loads.

    Field: fbuLLIMTop
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.

    Field: fbuLLIMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange stress due to LLIM demand at the section cut calculated without the
    consideration of flange lateral bending. Compression when negative. Value set to zero
    when Appendix A used.
    Page 3116 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: flLLIMBot
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Bottom flange lateral bending stress due to LLIM loads.

    Field: fdeckLLIM
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Top of concrete deck compression stress due to LLIM loads.

    Field: Fnc
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of compression flange. Value set to zero when Appendix
    A used.

    Field: Fnt
    Field is Imported: No
    Format: Stress Output (Stresses section of form)
    Units: Force/Length2
    Factored flexural resistance stress of tension flange. Value set to zero when Appendix A
    used.

    Field: Mr
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    Factored steel beam moment capacity. Value set to zero when Appendix A not used.

    Field: M3Rating
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Rating factor per 6.4.2.1 LRFR.
    Table: Cold Formed Design 1 - Summary Data - AISI-ASD96

    Page 3117 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The controlling stress ratio at the specified location.

    Field: RatioType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either PMM, Major Shear, Minor Shear, or Other indicating the origin of the
    reported TotalRatio.

    Page 3118 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Cold Formed Design 1 - Summary Data - AISI-LRFD96

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3119 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The controlling stress ratio at the specified location.

    Field: RatioType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either PMM, Major Shear, Minor Shear, or Other indicating the origin of the
    reported TotalRatio.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3120 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Cold Formed Design 2 - PMM Details - AISI-ASD96

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Page 3121 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM details are reported.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load for the specified combo.

    Field: MMajor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The major bending moment for the specified combo.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MMinor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The minor bending moment for the specified combo.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3122 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor shear for the specified combo.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: Torsion
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The torsion (about the local 1-axis) for the specified combo. This item is reported for
    information only. It is not used in the design.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The equation used to obtain the reported ratios.

    Field: TotalRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The total PMM stress ratio. This ratio is the sum of the axial, major moment and minor
    moment stress ratio components.

    Page 3123 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial component of the total PMM stress ratio. The total PMM stress ratio consists of
    the sum of the axial, major moment and minor moment components.

    Field: MMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: PDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The design axial force.

    Page 3124 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Pn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The nominal axial compressive strength (AISI C4).

    Field: Pn0
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The nominal axial compressive strength determined in accordance with section AISI C4
    assuming Fn = Fy (AISI 5.2.1).

    Field: Tn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The nominal axial tensile strength (AISI C2).

    Field: OmegaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The factor of safety for axial compression (AISI C4, 5.2).

    Field: OmegaT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The factor of safety for axial tension (AISI C2, 5.1).

    Field: MMajDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design major moment. This moment includes applicable amplification factors, if any.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3125 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MnMajor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The controlling nominal flexural strength about major axis (AISI C3).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MnYieldMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about major axis based on reduced cross-section and
    initiation of yielding (AISI C3.1.1), excluding the provision of lateral-torsional buckling
    (AISI C3.1.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MnLTBMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about major axis considering only the provision of lateraltorsional buckling (AISI C3.1.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MntMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about major axis based on gross full cross-section and
    initiation of yielding at the tension fiber (AISI 5.1.1).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3126 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OmegaBMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factor of safety for major direction bending involving the limit state of lateraltorsional buckling (AISI 3.1.2, 5.1.1, 5.2.1)
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: OmegaByMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factor of safety for major direction bending involving the limit state of initiation of
    yielding. The program considers the stiffening effect of the extreme compression flange
    for bending about the major axis (AISI 3.1.1, 5.1.1, 5.2.1)
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for major axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length (AISI 5.2.1).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CtfMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Ctf, for major axis bending used in determining the elastic critical
    moment, Me. It captures the effect of non-uniform moment distribution along the length
    (AISI C3.1.2-12).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3127 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Alpha, for major axis bending used in determining the stress ratio. It
    captures the second order effect of axial compression in amplifying moment (AISI 5.2.1).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: KMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object local major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: LFactMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Cb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, for major axis bending used in determining the nominal moment
    capacity based on lateral-torsional buckling. It captures the effect of non-uniform moment
    distribution along the length (AISI 3.1.2-11).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3128 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMinDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design minor moment. This moment includes applicable amplification factors, if any.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MnMinor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The controlling nominal flexural strength about minor axis (AISI C3).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MnYieldMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about minor axis based on reduced cross-section and
    initiation of yielding (AISI C3.1.1), excluding the provision of lateral-torsional buckling
    (AISI C3.1.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MnLTBMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about minor axis considering only the provision of lateraltorsional buckling (AISI C3.1.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3129 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MntMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about minor axis based on gross full cross-section and
    initiation of yielding at the tension fiber (AISI 5.1.1).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: OmegaBMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factor of safety for minor direction bending involving the limit state of lateraltorsional buckling (AISI 3.1.2, 5.1.1, 5.2.1)
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: OmegaByMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factor of safety for minor direction bending involving the limit state of initiation of
    yielding. The program considers the stiffening effect of the extreme compression flange
    for bending about the major axis (AISI 3.1.1, 5.1.1, 5.2.1)
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for minor axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length (AISI 5.2.1).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3130 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Alpha, for minor axis bending used in determining the stress ratio. It
    captures the second order effect of axial compression in amplifying moment (AISI 5.2.1).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: LFactMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The steel yield stress for the design section.

    Page 3131 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: E
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The modulus of elasticity for the design section.

    Field: Length
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total length of the frame object (not clear length).

    Field: MajAxisAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise from the local 3-axis to the major axis.

    Field: RLLF
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The reduced live load factor. A reducible live load is multiplied by this factor to obtain the
    reduced live load for the frame object.

    Field: SectClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Non-Slender, Slender or Too Slender indicating the classification of the
    section.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Page 3132 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Cold Formed Design 2 - PMM Details - AISI-LRFD96

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Page 3133 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM details are reported.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The factored axial load for the specified combo.

    Field: MuMajor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factored major bending moment for the specified combo.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MuMinor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factored minor bending moment for the specified combo.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3134 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VuMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The factored major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VuMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The factored minor shear for the specified combo.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: Torsionu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factored torsion (about the local 1-axis) for the specified combo. This item is reported
    for information only. It is not used in the design.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The equation used to obtain the reported ratios.

    Field: TotalRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The total PMM stress ratio. This ratio is the sum of the axial, major moment and minor
    moment stress ratio components.

    Page 3135 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial component of the total PMM stress ratio. The total PMM stress ratio consists of
    the sum of the axial, major moment and minor moment components.

    Field: MMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: PuDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The design factored axial force.

    Page 3136 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Pn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The nominal axial compressive strength (AISI C4).

    Field: Pn0
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The nominal axial compressive strength determined in accordance with section AISI C4
    assuming Fn = Fy (AISI 5.2.2).

    Field: Tn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The nominal axial tensile strength (AISI C2).

    Field: PhiC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The resistance factor for axial compression (AISI C4, 5.2).

    Field: PhiT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The resistance factor for axial tension (AISI C2, 5.1).

    Field: MuMajDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design factored major moment. This moment includes applicable amplification
    factors, if any.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3137 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MnMajor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The controlling nominal flexural strength about major axis (AISI C3).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MnYieldMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about major axis based on reduced cross-section and
    initiation of yielding (AISI C3.1.1), excluding the provision of lateral-torsional buckling
    (AISI C3.1.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MnLTBMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about major axis considering only the provision of lateraltorsional buckling (AISI C3.1.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MntMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about major axis based on gross full cross-section and
    initiation of yielding at the tension fiber (AISI 5.1.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3138 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiBMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The resistance factor for major direction bending involving the limit state of lateraltorsional buckling (AISI 3.1.2, 5.1.2, 5.2.2)
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: PhiByMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The resistance factor for major direction bending involving the limit state of initiation of
    yielding. The program considers the stiffening effect of the extreme compression flange
    for bending about the major axis (AISI 3.1.1, 5.1.2, 5.2.2)
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for major axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length (AISI 5.2.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CtfMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Ctf, for major axis bending used in determining the elastic critical
    moment, Me. It captures the effect of non-uniform moment distribution along the length
    (AISI C3.1.2-12).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3139 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Alpha, for major axis bending used in determining the stress ratio. It
    captures the second order effect of axial compression in amplifying moment (AISI 5.2.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: KMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object local major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: LFactMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Cb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, for major axis bending used in determining the nominal moment
    capacity based on lateral-torsional buckling. It captures the effect of non-uniform moment
    distribution along the length (AISI 3.1.2-11).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3140 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuMinDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design factored minor moment. This moment includes applicable amplification
    factors, if any.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MnMinor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The controlling nominal flexural strength about minor axis (AISI C3).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MnYieldMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about minor axis based on reduced cross-section and
    initiation of yielding (AISI C3.1.1), excluding the provision of lateral-torsional buckling
    (AISI C3.1.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MnLTBMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about minor axis considering only the provision of lateraltorsional buckling (AISI C3.1.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3141 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MntMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about minor axis based on gross full cross-section and
    initiation of yielding at the tension fiber (AISI 5.1.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: PhiBMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The resistance factor for minor direction bending involving the limit state of lateraltorsional buckling (AISI 3.1.2, 5.1.2, 5.2.2)
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: PhiByMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The resistance factor for minor direction bending involving the limit state of initiation of
    yielding. The program considers the stiffening effect of the extreme compression flange
    for bending about the major axis (AISI 3.1.1, 5.1.2, 5.2.2)
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for minor axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length (AISI 5.2.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3142 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Alpha, for minor axis bending used in determining the stress ratio. It
    captures the second order effect of axial compression in amplifying moment (AISI 5.2.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: LFactMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The steel yield stress for the design section.

    Page 3143 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: E
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The modulus of elasticity for the design section.

    Field: Length
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total length of the frame object (not clear length).

    Field: MajAxisAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise from the local 3-axis to the major axis.

    Field: RLLF
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The reduced live load factor. A reducible live load is multiplied by this factor to obtain the
    reduced live load for the frame object.

    Field: SectClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Non-Slender, Slender or Too Slender indicating the classification of the
    section.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Page 3144 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Cold Formed Design 3 - Shear Details - AISI-ASD96

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Page 3145 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear data is reported.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: VMajorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major shear stress ratio.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3146 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VnMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major direction shear capacity.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: OmegaVMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major direction shear capacity.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: TorsionMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The torsion (about the local 1-axis) for the specified VMajorCombo. This item is reported
    for information only. It is not used in the design.

    Field: VMinorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear data is reported.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3147 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: VMinorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor shear stress ratio.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The factored minor shear for the specified combo.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VnMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor direction shear capacity.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3148 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OmegaVMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor direction shear capacity.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: TorsionMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factored torsion (about the local 1-axis) for the specified VMinorCombo. This item is
    reported for information only. It is not used in the design.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: RLLF
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The reduced live load factor. A reducible live load is multiplied by this factor to obtain the
    reduced live load for the frame object.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Page 3149 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Cold Formed Design 3 - Shear Details - AISI-LRFD96

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Page 3150 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear data is reported.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: VMajorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major shear stress ratio.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VuMajDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The design factored major shear.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3151 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VnMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major direction shear capacity.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: PhiVMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major direction shear capacity.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: TorsionMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factored torsion (about the local 1-axis) for the specified VMajorCombo. This item is
    reported for information only. It is not used in the design.

    Field: VMinorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear data is reported.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3152 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: VMinorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor shear stress ratio.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VuMinDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The design factored minor shear.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VnMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor direction shear capacity.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3153 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiVMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor direction shear capacity.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: TorsionMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factored torsion (about the local 1-axis) for the specified VMinorCombo. This item is
    reported for information only. It is not used in the design.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: RLLF
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The reduced live load factor. A reducible live load is multiplied by this factor to obtain the
    reduced live load for the frame object.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Page 3154 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Cold Formed Details 1 - Summary Data - AISI-ASD96

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Page 3155 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The controlling stress ratio at the specified location.

    Field: RatioType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either PMM, Major Shear, Minor Shear, or Other indicating the origin of the
    reported TotalRatio.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Cold Formed Details 1 - Summary Data - AISI-LRFD96

    Page 3156 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Field: Ratio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The controlling stress ratio at the specified location.

    Field: RatioType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either PMM, Major Shear, Minor Shear, or Other indicating the origin of the
    reported TotalRatio.

    Page 3157 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the stress ratio is reported.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Cold Formed Details 2 - PMM Details - AISI-ASD96

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3158 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM details are reported.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: P
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The axial load for the specified combo.

    Field: MMajor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The major bending moment for the specified combo.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3159 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MMinor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The minor bending moment for the specified combo.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: VMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor shear for the specified combo.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: Torsion
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The torsion (about the local 1-axis) for the specified combo. This item is reported for
    information only. It is not used in the design.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The equation used to obtain the reported ratios.
    Page 3160 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TotalRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The total PMM stress ratio. This ratio is the sum of the axial, major moment and minor
    moment stress ratio components.

    Field: PRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial component of the total PMM stress ratio. The total PMM stress ratio consists of
    the sum of the axial, major moment and minor moment components.

    Field: MMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Page 3161 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The design axial force.

    Field: Pn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The nominal axial compressive strength (AISI C4).

    Field: Pn0
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The nominal axial compressive strength determined in accordance with section AISI C4
    assuming Fn = Fy (AISI 5.2.1).

    Field: Tn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The nominal axial tensile strength (AISI C2).

    Field: OmegaC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The factor of safety for axial compression (AISI C4, 5.2).

    Field: OmegaT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The factor of safety for axial tension (AISI C2, 5.1).

    Field: MMajDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design major moment. This moment includes applicable amplification factors, if any.
    Page 3162 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MnMajor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The controlling nominal flexural strength about major axis (AISI C3).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MnYieldMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about major axis based on reduced cross-section and
    initiation of yielding (AISI C3.1.1), excluding the provision of lateral-torsional buckling
    (AISI C3.1.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MnLTBMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about major axis considering only the provision of lateraltorsional buckling (AISI C3.1.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MntMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about major axis based on gross full cross-section and
    initiation of yielding at the tension fiber (AISI 5.1.1).

    Page 3163 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: OmegaBMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factor of safety for major direction bending involving the limit state of lateraltorsional buckling (AISI 3.1.2, 5.1.1, 5.2.1)
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: OmegaByMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factor of safety for major direction bending involving the limit state of initiation of
    yielding. The program considers the stiffening effect of the extreme compression flange
    for bending about the major axis (AISI 3.1.1, 5.1.1, 5.2.1)
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for major axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length (AISI 5.2.1).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CtfMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Ctf, for major axis bending used in determining the elastic critical
    moment, Me. It captures the effect of non-uniform moment distribution along the length
    (AISI C3.1.2-12).
    Page 3164 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: AlphaMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Alpha, for major axis bending used in determining the stress ratio. It
    captures the second order effect of axial compression in amplifying moment (AISI 5.2.1).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: KMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object local major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: LFactMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Cb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, for major axis bending used in determining the nominal moment
    capacity based on lateral-torsional buckling. It captures the effect of non-uniform moment
    distribution along the length (AISI 3.1.2-11).
    Page 3165 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MMinDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design minor moment. This moment includes applicable amplification factors, if any.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MnMinor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The controlling nominal flexural strength about minor axis (AISI C3).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MnYieldMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about minor axis based on reduced cross-section and
    initiation of yielding (AISI C3.1.1), excluding the provision of lateral-torsional buckling
    (AISI C3.1.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MnLTBMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about minor axis considering only the provision of lateraltorsional buckling (AISI C3.1.2).

    Page 3166 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MntMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about minor axis based on gross full cross-section and
    initiation of yielding at the tension fiber (AISI 5.1.1).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: OmegaBMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factor of safety for minor direction bending involving the limit state of lateraltorsional buckling (AISI 3.1.2, 5.1.1, 5.2.1)
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: OmegaByMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factor of safety for minor direction bending involving the limit state of initiation of
    yielding. The program considers the stiffening effect of the extreme compression flange
    for bending about the major axis (AISI 3.1.1, 5.1.1, 5.2.1)
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for minor axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length (AISI 5.2.1).

    Page 3167 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: AlphaMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Alpha, for minor axis bending used in determining the stress ratio. It
    captures the second order effect of axial compression in amplifying moment (AISI 5.2.1).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: LFactMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The steel yield stress for the design section.

    Page 3168 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: E
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The modulus of elasticity for the design section.

    Field: Length
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total length of the frame object (not clear length).

    Field: MajAxisAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise from the local 3-axis to the major axis.

    Field: RLLF
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The reduced live load factor. A reducible live load is multiplied by this factor to obtain the
    reduced live load for the frame object.

    Field: SectClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Non-Slender, Slender or Too Slender indicating the classification of the
    section.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Page 3169 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Cold Formed Details 2 - PMM Details - AISI-LRFD96

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Page 3170 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Combo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM details are reported.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: Pu
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The factored axial load for the specified combo.

    Field: MuMajor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factored major bending moment for the specified combo.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MuMinor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factored minor bending moment for the specified combo.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3171 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VuMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The factored major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VuMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The factored minor shear for the specified combo.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: Torsionu
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factored torsion (about the local 1-axis) for the specified combo. This item is reported
    for information only. It is not used in the design.

    Field: Equation
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The equation used to obtain the reported ratios.

    Field: TotalRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The total PMM stress ratio. This ratio is the sum of the axial, major moment and minor
    moment stress ratio components.

    Page 3172 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial component of the total PMM stress ratio. The total PMM stress ratio consists of
    the sum of the axial, major moment and minor moment components.

    Field: MMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor moment component of the total PMM stress ratio. The total PMM stress ratio
    consists of the sum of the axial, major moment and minor moment components.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: PuDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The design factored axial force.

    Page 3173 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Pn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The nominal axial compressive strength (AISI C4).

    Field: Pn0
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The nominal axial compressive strength determined in accordance with section AISI C4
    assuming Fn = Fy (AISI 5.2.2).

    Field: Tn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The nominal axial tensile strength (AISI C2).

    Field: PhiC
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The resistance factor for axial compression (AISI C4, 5.2).

    Field: PhiT
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The resistance factor for axial tension (AISI C2, 5.1).

    Field: MuMajDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design factored major moment. This moment includes applicable amplification
    factors, if any.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3174 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MnMajor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The controlling nominal flexural strength about major axis (AISI C3).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MnYieldMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about major axis based on reduced cross-section and
    initiation of yielding (AISI C3.1.1), excluding the provision of lateral-torsional buckling
    (AISI C3.1.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MnLTBMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about major axis considering only the provision of lateraltorsional buckling (AISI C3.1.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: MntMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about major axis based on gross full cross-section and
    initiation of yielding at the tension fiber (AISI 5.1.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3175 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiBMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The resistance factor for major direction bending involving the limit state of lateraltorsional buckling (AISI 3.1.2, 5.1.2, 5.2.2)
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: PhiByMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The resistance factor for major direction bending involving the limit state of initiation of
    yielding. The program considers the stiffening effect of the extreme compression flange
    for bending about the major axis (AISI 3.1.1, 5.1.2, 5.2.2)
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CmMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for major axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length (AISI 5.2.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CtfMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Ctf, for major axis bending used in determining the elastic critical
    moment, Me. It captures the effect of non-uniform moment distribution along the length
    (AISI C3.1.2-12).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3176 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Alpha, for major axis bending used in determining the stress ratio. It
    captures the second order effect of axial compression in amplifying moment (AISI 5.2.2).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: KMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object local major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: LFactMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object major axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: Cb
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cb, for major axis bending used in determining the nominal moment
    capacity based on lateral-torsional buckling. It captures the effect of non-uniform moment
    distribution along the length (AISI 3.1.2-11).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3177 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MuMinDsgn
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The design factored minor moment. This moment includes applicable amplification
    factors, if any.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MnMinor
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The controlling nominal flexural strength about minor axis (AISI C3).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MnYieldMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about minor axis based on reduced cross-section and
    initiation of yielding (AISI C3.1.1), excluding the provision of lateral-torsional buckling
    (AISI C3.1.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: MnLTBMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about minor axis considering only the provision of lateraltorsional buckling (AISI C3.1.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3178 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: MntMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The nominal flexural strength about minor axis based on gross full cross-section and
    initiation of yielding at the tension fiber (AISI 5.1.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: PhiBMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The resistance factor for minor direction bending involving the limit state of lateraltorsional buckling (AISI 3.1.2, 5.1.2, 5.2.2)
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: PhiByMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The resistance factor for minor direction bending involving the limit state of initiation of
    yielding. The program considers the stiffening effect of the extreme compression flange
    for bending about the major axis (AISI 3.1.1, 5.1.2, 5.2.2)
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CmMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Cm, for minor axis bending used in determining the stress ratio. It
    captures the effect of non-uniform moment distribution along the length (AISI 5.2.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3179 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: AlphaMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unitless factor, Alpha, for minor axis bending used in determining the stress ratio. It
    captures the second order effect of axial compression in amplifying moment (AISI 5.2.2).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: KMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Effective length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the effective length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: LFactMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    Unbraced length factor for buckling about the frame object minor axis. This item is
    specified as a fraction of the frame object length. Multiplying this factor times the frame
    object length gives the unbraced length for the object.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: Fy
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The steel yield stress for the design section.

    Page 3180 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: E
    Field is Imported: No
    Format: Stress Input (Stresses section of form)
    Units: Force/Length2
    The modulus of elasticity for the design section.

    Field: Length
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The total length of the frame object (not clear length).

    Field: MajAxisAng
    Field is Imported: No
    Format: Angles (Structure Dimensions section of form)
    Units: Degrees
    The angle measured counterclockwise from the local 3-axis to the major axis.

    Field: RLLF
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The reduced live load factor. A reducible live load is multiplied by this factor to obtain the
    reduced live load for the frame object.

    Field: SectClass
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Non-Slender, Slender or Too Slender indicating the classification of the
    section.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Page 3181 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Cold Formed Details 3 - Shear Details - AISI-ASD96

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Page 3182 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear data is reported.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: VMajorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major shear stress ratio.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major shear for the specified combo.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3183 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VnMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major direction shear capacity.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: OmegaVMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major direction shear capacity.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: TorsionMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The torsion (about the local 1-axis) for the specified VMajorCombo. This item is reported
    for information only. It is not used in the design.

    Field: VMinorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear data is reported.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3184 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: VMinorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor shear stress ratio.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The factored minor shear for the specified combo.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VnMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor direction shear capacity.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3185 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: OmegaVMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor direction shear capacity.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: TorsionMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factored torsion (about the local 1-axis) for the specified VMinorCombo. This item is
    reported for information only. It is not used in the design.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: RLLF
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The reduced live load factor. A reducible live load is multiplied by this factor to obtain the
    reduced live load for the frame object.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Page 3186 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Cold Formed Details 3 - Shear Details - AISI-LRFD96

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'Overstressed', 'See ErrMsg', 'See WarnMsg', 'See ErrMsg
    and WarnMsg', or 'Overstressed and See WarnMsg' indicating the design status.

    Page 3187 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear data is reported.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: VMajorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major shear stress ratio.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VuMajDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The design factored major shear.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3188 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VnMajor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The major direction shear capacity.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: PhiVMajor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The major direction shear capacity.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: TorsionMaj
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factored torsion (about the local 1-axis) for the specified VMajorCombo. This item is
    reported for information only. It is not used in the design.

    Field: VMinorCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear data is reported.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3189 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinorLoc
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: VMinorRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor shear stress ratio.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VuMinDsgn
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The design factored minor shear.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VnMinor
    Field is Imported: No
    Format: Force (Forces section of form)
    Units: Force
    The minor direction shear capacity.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3190 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PhiVMinor
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The minor direction shear capacity.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: TorsionMin
    Field is Imported: No
    Format: Moment (Forces section of form)
    Units: Force-Length
    The factored torsion (about the local 1-axis) for the specified VMinorCombo. This item is
    reported for information only. It is not used in the design.

    Field: SRLimit
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The stress ratio limit as specified in the preferences. Stress ratios that are less than or
    equal to this value are considered acceptable.

    Field: RLLF
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The reduced live load factor. A reducible live load is multiplied by this factor to obtain the
    reduced live load for the frame object.

    Field: FramingType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The framing type. This is either Moment Frame or Braced Frame. This item is used for
    ductility considerations in the design.

    Page 3191 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - AASHTO Concrete 07

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3192 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3193 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3194 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - ACI 318-02

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3195 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3196 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3197 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - ACI 318-05/IBC2003

    Page 3198 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3199 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3200 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3201 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - ACI 318-08/IBC2009

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3202 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3203 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3204 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - ACI 318-11

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3205 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3206 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3207 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - ACI 318-99

    Page 3208 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3209 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3210 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3211 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - AS 3600-09

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3212 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3213 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3214 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - AS 3600-01

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3215 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3216 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3217 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - BS8110 89

    Page 3218 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3219 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3220 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3221 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - BS8110 97

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3222 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3223 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3224 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - Chinese 2010

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3225 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3226 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3227 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - CSA A233-04

    Page 3228 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3229 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3230 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3231 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - CSA-A233-94

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3232 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3233 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3234 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - EUROCODE 2-1992

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3235 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3236 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3237 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - Eurocode 2-2004

    Page 3238 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3239 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3240 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3241 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - Hong Kong CP 2013

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 3242 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    .

    Page 3243 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    .

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Table: Concrete Design 1 - Column Summary Data - Hong Kong CP 2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.
    Page 3244 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Page 3245 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).

    Page 3246 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - Indian IS 456-2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 3247 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3248 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    Page 3249 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Page 3250 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Concrete Design 1 - Column Summary Data - Italian NTC 2008

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3251 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3252 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3253 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - Italian DM 14-2-92

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3254 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3255 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3256 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - KCI-1999

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3257 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3258 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3259 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - Mexican RCDF 2004

    Page 3260 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3261 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3262 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3263 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - Mexican RCDF 2001

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3264 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3265 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3266 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - NZS 3101-06

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3267 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3268 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3269 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - NZS 3101-95

    Page 3270 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3271 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3272 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3273 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - Singapore CP 65:99

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3274 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3275 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3276 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - TS 500-2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3277 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3278 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3279 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 1 - Column Summary Data - UBC97

    Page 3280 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3281 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3282 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3283 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - AASHTO Concrete 07

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3284 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3285 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3286 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - ACI 318-02

    Page 3287 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3288 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3289 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3290 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - ACI 318-05/IBC2003

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3291 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3292 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3293 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - ACI 318-08/IBC2009

    Page 3294 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3295 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3296 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3297 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - ACI 318-11

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3298 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3299 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3300 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - ACI 318-99

    Page 3301 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3302 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3303 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3304 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - AS 3600-09

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3305 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3306 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3307 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - AS 3600-01

    Page 3308 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3309 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3310 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3311 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - BS8110 89

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3312 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3313 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3314 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - BS8110 97

    Page 3315 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3316 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3317 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3318 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - Chinese 2010

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3319 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3320 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3321 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - CSA A233-04

    Page 3322 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3323 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3324 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3325 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - CSA-A233-94

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3326 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3327 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3328 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - EUROCODE 2-1992

    Page 3329 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3330 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3331 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3332 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - Eurocode 2-2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3333 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3334 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3335 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - Hong Kong CP 2013

    Page 3336 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    .

    Page 3337 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    .

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 3338 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    .

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Table: Concrete Design 2 - Beam Summary Data - Hong Kong CP 2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3339 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3340 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3341 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - Indian IS 456-2000

    Page 3342 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3343 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3344 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3345 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - Italian NTC 2008

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3346 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3347 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3348 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - Italian DM 14-2-92

    Page 3349 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3350 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3351 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3352 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - KCI-1999

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3353 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3354 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3355 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - Mexican RCDF 2004

    Page 3356 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3357 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3358 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3359 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - Mexican RCDF 2001

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3360 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3361 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3362 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - NZS 3101-06

    Page 3363 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3364 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3365 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3366 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - NZS 3101-95

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3367 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3368 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3369 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - Singapore CP 65:99

    Page 3370 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3371 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3372 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3373 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - TS 500-2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3374 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3375 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3376 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 2 - Beam Summary Data - UBC97

    Page 3377 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3378 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3379 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3380 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - ACI 318-02

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    Page 3381 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.

    Page 3382 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    Page 3383 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - ACI 318-05/IBC2003

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.
    Page 3384 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3385 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3386 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - ACI 318-08/IBC2009

    Page 3387 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3388 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3389 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3390 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - ACI 318-11

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3391 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3392 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3393 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - ACI 318-99

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3394 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3395 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3396 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - AS 3600-09

    Page 3397 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3398 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3399 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3400 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - AS 3600-01

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3401 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3402 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3403 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - BS8110 89

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3404 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3405 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3406 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - BS8110 97

    Page 3407 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3408 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3409 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3410 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - CSA A233-04

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3411 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3412 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3413 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - CSA-A233-94

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3414 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3415 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3416 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - EUROCODE 2-1992

    Page 3417 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3418 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3419 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3420 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - Eurocode 2-2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3421 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajAv
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The joint shear rebar area required associated with the column major axis.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinAv
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The joint shear rebar area required associated with the column minor axis.

    Page 3422 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3423 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - Hong Kong CP 2013

    Page 3424 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 3425 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Table: Concrete Design 3 - Joint Summary Data - Hong Kong CP 2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 3426 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3427 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3428 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - Indian IS 456-2000

    Page 3429 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3430 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3431 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3432 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - Italian NTC 2008

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3433 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3434 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3435 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - Italian DM 14-2-92

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3436 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3437 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3438 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - KCI-1999

    Page 3439 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3440 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3441 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3442 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - Mexican RCDF 2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3443 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3444 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3445 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - Mexican RCDF 2001

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3446 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3447 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3448 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - NZS 3101-06

    Page 3449 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3450 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3451 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3452 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - NZS 3101-95

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3453 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3454 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3455 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - Singapore CP 65:99

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3456 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3457 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3458 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - TS 500-2000

    Page 3459 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3460 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3461 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3462 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Design 3 - Joint Summary Data - UBC97

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3463 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3464 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3465 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - AASHTO Concrete 07

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3466 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3467 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3468 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - ACI 318-02

    Page 3469 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3470 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3471 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3472 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - ACI 318-05/IBC2003

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3473 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3474 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3475 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - ACI 318-08/IBC2009

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3476 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3477 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3478 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - ACI 318-11

    Page 3479 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3480 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3481 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3482 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - ACI 318-99

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3483 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3484 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3485 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - AS 3600-09

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3486 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3487 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3488 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - AS 3600-01

    Page 3489 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3490 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3491 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3492 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - BS8110 89

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3493 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3494 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3495 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - BS8110 97

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3496 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3497 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3498 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - Chinese 2010

    Page 3499 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3500 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3501 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3502 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - CSA A233-04

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3503 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3504 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3505 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - CSA-A233-94

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3506 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3507 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3508 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - EUROCODE 2-1992

    Page 3509 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3510 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3511 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3512 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - Eurocode 2-2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3513 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3514 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3515 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - Hong Kong CP 2013

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 3516 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Page 3517 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    .

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    .

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Table: Concrete Details 1 - Column Summary Data - Hong Kong CP 2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.
    Page 3518 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3519 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    Page 3520 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Page 3521 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Table: Concrete Details 1 - Column Summary Data - Indian IS 456-2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3522 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3523 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3524 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - Italian NTC 2008

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3525 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3526 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3527 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - Italian DM 14-2-92

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3528 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3529 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3530 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - KCI-1999

    Page 3531 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3532 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3533 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3534 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - Mexican RCDF 2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3535 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3536 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3537 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - Mexican RCDF 2001

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3538 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3539 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3540 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - NZS 3101-06

    Page 3541 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3542 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3543 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3544 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - NZS 3101-95

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3545 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3546 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3547 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - Singapore CP 65:99

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3548 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3549 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Page 3550 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - TS 500-2000

    Page 3551 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Page 3552 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.
    Page 3553 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Page 3554 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 1 - Column Summary Data - UBC97

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: DesignOpt
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Check or Design indicating whether the frame object is to be checked or
    designed.

    Page 3555 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: PMMCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the PMM bar area or ratio is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: PMMArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal rebar area required for the axial force plus biaxial moment (PMM)
    design at the specified location. This item is only applicable if the DesignOpt item is
    Design.

    Field: PMMRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The axial force plus biaxial moment (PMM) stress ratio at the specified location. This
    item is only applicable if the DesignOpt item is Check.

    Page 3556 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the major shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMajRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for major
    shear at the specified location.
    For symmetrical sections major shear is shear in the local 2-axis direction. For
    unsymmetrical sections (e.g., angles) major shear is the shear associated with major
    bending. Note that major bending is the bending about the section principal axis with the
    larger moment of inertia.

    Field: VMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the minor shear bar area per unit
    length is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.
    Page 3557 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VMinRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for minor
    shear at the specified location.
    For symmetrical sections minor shear is shear in the local 3-axis direction. For
    unsymmetrical sections (e.g., angles) minor shear is the shear associated with minor
    bending. Note that minor bending is the bending about the section principal axis with the
    smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - AASHTO Concrete 07

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Page 3558 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Page 3559 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Page 3560 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Page 3561 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - ACI 318-02

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3562 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3563 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3564 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - ACI 318-05/IBC2003

    Page 3565 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3566 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3567 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3568 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - ACI 318-08/IBC2009

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3569 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3570 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3571 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - ACI 318-11

    Page 3572 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3573 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3574 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3575 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - ACI 318-99

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3576 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3577 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3578 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - AS 3600-09

    Page 3579 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3580 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3581 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3582 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - AS 3600-01

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3583 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3584 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3585 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - BS8110 89

    Page 3586 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3587 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3588 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3589 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - BS8110 97

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3590 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3591 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3592 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - Chinese 2010

    Page 3593 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3594 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3595 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3596 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - CSA A233-04

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3597 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3598 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3599 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - CSA-A233-94

    Page 3600 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3601 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3602 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3603 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - EUROCODE 2-1992

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3604 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3605 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3606 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - Eurocode 2-2004

    Page 3607 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3608 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3609 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3610 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - Hong Kong CP 2013

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 3611 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    .

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 3612 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    .

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    .

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    .

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Table: Concrete Details 2 - Beam Summary Data - Hong Kong CP 2004
    Page 3613 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3614 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3615 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3616 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - Indian IS 456-2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3617 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3618 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3619 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - Italian NTC 2008

    Page 3620 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3621 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3622 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3623 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - Italian DM 14-2-92

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3624 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3625 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3626 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - KCI-1999

    Page 3627 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3628 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3629 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3630 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - Mexican RCDF 2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3631 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3632 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3633 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - Mexican RCDF 2001

    Page 3634 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3635 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3636 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3637 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - NZS 3101-95

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3638 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3639 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3640 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - Singapore CP 65:99

    Page 3641 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3642 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3643 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3644 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - TS 500-2000

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Page 3645 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3646 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3647 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 2 - Beam Summary Data - UBC97

    Page 3648 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: DesignSect
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    The current design section for the frame object.

    Field: DesignType
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either Beam, Brace or Column indicating the frame object design type.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: Location
    Field is Imported: No
    Format: Absolute Distance (Structure Dimensions section of form)
    Units: Length
    The distance measured from the left end (I-End) of the frame object to the location where
    output is reported.

    Field: FTopCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural top bar area is reported.
    It is either the name of a specified design load combination, or the name of a specified
    design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified

    Page 3649 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FTopArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal top rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: FBotCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the flexural bottom bar area is
    reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: FBotArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The total longitudinal bottom rebar area required for flexure at the specified location. This
    does not include the area of longitudinal rebar required for torsion, if any.

    Field: VCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the shear rebar area per unit length
    is reported. It is either the name of a specified design load combination, or the name of a
    specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3650 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: VRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area of transverse shear reinforcing per unit length along the beam for shear
    at the specified location. This does not include the area of transverse reinforcing required
    for torsion, if any.

    Field: TLngCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of longitudinal rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Field: TLngArea
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The required area of longitudinal reinforcing required for torsion. This does not include
    the area of longitudinal rebar required for flexure, if any.

    Field: TTrnCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the area of transverse rebar for
    torsion is reported. It is either the name of a specified design load combination, or the
    name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).

    Page 3651 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: TTrnRebar
    Field is Imported: No
    Format: Rebar Area/Length (Section Dimensions section of form)
    Units: in2/ft
    The required area per unit length along the beam of one leg of a closed stirrup around the
    perimeter of the beam at the specified location. This does not include the area of
    transverse reinforcing required for shear, if any.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - ACI 318-02

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    Page 3652 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.

    Page 3653 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    Page 3654 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - ACI 318-05/IBC2003

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.
    Page 3655 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3656 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3657 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - ACI 318-08/IBC2009

    Page 3658 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3659 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3660 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3661 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - ACI 318-11

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3662 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3663 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3664 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - ACI 318-99

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3665 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3666 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3667 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - AS 3600-09

    Page 3668 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3669 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3670 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3671 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - AS 3600-01

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3672 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3673 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3674 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - BS8110 89

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3675 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3676 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3677 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - BS8110 97

    Page 3678 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3679 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3680 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3681 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - CSA A233-04

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3682 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3683 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3684 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - CSA-A233-94

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3685 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3686 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3687 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - EUROCODE 2-1992

    Page 3688 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3689 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3690 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3691 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - Eurocode 2-2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3692 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajAv
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The joint shear rebar area required associated with the column major axis.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinAv
    Field is Imported: No
    Format: Rebar Area (Section Dimensions section of form)
    Units: Length2
    The joint shear rebar area required associated with the column minor axis.

    Page 3693 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3694 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - Hong Kong CP 2013

    Page 3695 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Page 3696 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    .

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    .
    Table: Concrete Details 3 - Joint Summary Data - Hong Kong CP 2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Page 3697 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    Page 3698 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3699 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - Indian IS 456-2000

    Page 3700 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3701 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3702 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3703 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - Italian NTC 2008

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3704 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3705 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3706 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - Italian DM 14-2-92

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3707 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3708 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3709 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - KCI-1999

    Page 3710 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3711 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3712 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3713 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - Mexican RCDF 2004

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3714 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3715 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3716 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - Mexican RCDF 2001

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3717 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3718 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3719 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - NZS 3101-06

    Page 3720 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3721 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3722 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3723 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - NZS 3101-95

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3724 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    Page 3725 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3726 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - Singapore CP 65:99

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Page 3727 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3728 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3729 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - TS 500-2000

    Page 3730 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3731 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column minor axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: JSMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column minor axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column major axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Page 3732 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: CBMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.

    Field: CBMinCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the column/beam capacity ratio
    associated with the column minor axis is reported. It is either the name of a specified
    design load combination, or the name of a specified design load combination followed by
    (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Field: CBMinRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The column/beam capacity ratio associated with the column major axis. This is the sum of
    the column capacities divided by the sum of the beam capacities at the top of the specified
    column.
    For symmetrical sections minor bending is bending about the local 2-axis. For
    unsymmetrical sections (e.g., angles) minor bending is the bending about the section
    principal axis with the smaller moment of inertia.

    Page 3733 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: ErrMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Error messages generated during the design/check, if any. If no error messages exist then
    this item is reported as None.

    Field: WarnMsg
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Warning messages generated during the design/check, if any. If no warning messages
    exist then this item is reported as None.
    Table: Concrete Details 3 - Joint Summary Data - UBC97

    Field: Frame
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    Label of a Frame object.

    Field: Status
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This is either 'No Messages', 'See ErrMsg', 'See WarnMsg', or 'See ErrMsg and WarnMsg'
    indicating the design status.

    Field: JSMajCombo
    Field is Imported: No
    Format: Controlled by program
    Units: Text
    This identifies the design load combination for which the joint shear ratio associated with
    the column major axis is reported. It is either the name of a specified design load
    combination, or the name of a specified design load combination followed by (SP).
    A design load combination name followed by (SP) indicates that either the design loads
    were obtained by applying special, code-specific, multipliers to all or part of the specified
    design load combination; or that the design was based on the capacity of other members
    (or other design locations for the same member).
    For symmetrical sections major bending is bending about the local 3-axis. For
    unsymmetrical sections (e.g., angles) major bending is the bending about the section
    principal axis with the larger moment of inertia.
    Page 3734 of 5083

    2015 Computers and Structures, Inc.

    SAP2000 Database Documentation

    Field: JSMajRatio
    Field is Imported: No
    Format: Controlled by program
    Units: Unitless
    The joint shear ratio associated with the column major axis. This is the joint shear divided
    by the joint shear capacity.
    For symmetrical sections major bending is bending about the local 3-axis. For
    u

    You might also like