You are on page 1of 4

MHENDSLK FAKLTES

FACULTY OF ENGINEERING
NAAT MHENDSL BLM
DEPARTMENT OF CIVIL ENGINEERING

CE 101 Civil Engineering Drawing 2016-1


Lab Exercises 5 Due date 29/11/2016
For this exercise you have 4 orthographic projections that you need to draw their isometric projections in
AutoCAD. Each projection takes place in one page of this file. You should draw all the figures in one AutoCAD file.
However, only one of these figures will be graded. This figure will be chosen after the due date of this exercise.
You need to draw the necessary dimensions over the figures in the proper way.
Before you start drawing:
a. Create a New drawing file and Save it by your Name Student Number and CE 101 LE5 as a suffix.
(Example: John 1234567 CE101 LE5.dwg)
b. Besides of the default layer 0, create three new layers named Dimensions for all types of
dimensions, Hidden for all the hidden lines and Layout for the title block and the layout.
c. Make the default color for the Dimensions layer Green and for the Hidden layer Red.
d. For each figure you need to draw a layout and a title block like the ones in Lab Exercise -4-.
After you finish drawing:
e. For each of the four layouts created you need to save that layout as a PDF file, which means you
will submit one AutoCAD file and four PDF files. The names of the PDF files should be the same as
the AutoCAD file but with a suffix of -the number of the figure.
(Example: John 1234567 CE101 LE5-1.pdf)
f. To create the PDF files you need to use the Plot command. On the Plot Box appeared, choose
AutoCAD PDF (General Documentation) under the Name of the Printer/plotter. After that, choose
the Paper size as A4. On the Plot area choose Window from What to plot menu, and then by using
that window choose the layout that you want to plot. Before you press the Ok button, make sure
that Center the plot and Fit to paper boxes are checked.
.68

4.000

2.380

R0

1- Draw the isometric projection based


on the orthographic projections
shown on the right.

0.500

0
1.000

0.500

1.125

0.625
1.000

.68

3.000
0.500

0.940
0.500

0.940
0.500

METU CE 101 2016-1

Page 1 of 4

MHENDSLK FAKLTES
FACULTY OF ENGINEERING
NAAT MHENDSL BLM
DEPARTMENT OF CIVIL ENGINEERING

CE 101 Civil Engineering Drawing 2016-1


2- Draw the isometric projection based on the orthographic projections shown below.

.6

1.125

3.000
1.000

0.500

1.250

1.000

0.750
1.500

1.000

R0

0.500

25

5.000
0.375
1.500

1.500
2.500

4.000

METU CE 101 2016-1

1.000

1.000

0.500
2.500

1.500
0.750

1.500

1.000

1.500

0.750

1.000

1.125

1.000

0.500
0.500
1.000

0.750
1.250

1.125

62

0.

2.250

1.000

3.000

1.000

Page 2 of 4

MHENDSLK FAKLTES
FACULTY OF ENGINEERING
NAAT MHENDSL BLM
DEPARTMENT OF CIVIL ENGINEERING

CE 101 Civil Engineering Drawing 2016-1


3- Draw the isometric projection based on the orthographic projections shown on the right.

0.75
2.00

2.25

5.00

45

0.

4x

.50

1.00

4.50

0.50
1.00

R0

.75

1.00

R
4x

00

1.00

2.
.60

50

.60

6.00
2.50

2.00

. 00
R1

R0

R1.0

2.50

4.00

50

3.50

0.

0.50
2.00

2.00

R0

0.
R

1.00

2.50

1.75

2.50

4.50

R0

2.75

.5

.50

1.00

1.00

R0

3.75

2.50

1.00

3.00

2.50

1.00

4.50
10.00

METU CE 101 2016-1

0.75

Page 3 of 4

MHENDSLK FAKLTES
FACULTY OF ENGINEERING
NAAT MHENDSL BLM
DEPARTMENT OF CIVIL ENGINEERING

CE 101 Civil Engineering Drawing 2016-1

1.100

1.100

4.600

0.650

0.600
1.600

0.600

1.200

2.000

0.600
2.400

0.600
1.100

0.650

4- Draw the isometric projection based on the orthographic projections shown on the right.

1.500

2.700

1.500

3.000

5.00

1.100

4.60

2.700

1.200

1.100

1.00
0.50

METU CE 101 2016-1

1.70
0.15

1.00
0.15

2.700
0.50

1.500

1.350

1.35

0.150

0.300

0.70

2.20

2.00

0.600

2.200

2.10

0.90

2.600
0.500

0.500

Page 4 of 4

0.900

0.30

2.000

You might also like