Professional Documents
Culture Documents
DETAILS
FOR METAL
ROOFING
AND SIDING
AGRICULTURAL
LIGHT COMMERCIAL
RESIDENTIAL
Due to Product improvements, changes and other factors, Fabral reserves the right to change or delete information herein without prior notice or obligation to make changes in products previously purchased.
The details and written instructions described in this manual are suggested installation methods to
ensure a quality application of our products, and should be considered as a guideline only. FABRAL
recognizes that installation techniques can vary based upon builder and geographical preferences, and
that there are other acceptable ways to install our products.
Fabral.com
TABLE OF CONTENTS
Introduction....................................................................2
Fabral Core....................................................................3
Installation Instructions..................................................4-5
Steel Panel Profiles........................................................6-8
Aluminum Panel Profiles................................................9
Estimating & Roof Types................................................10
Load Tables & Testing....................................................11
Building Details
Post Frame.................................................................... 12
Residential..................................................................... 13
Post Frame Flashing Details
Endlap & Rain Carrying Table............................................... 14
Flashings/Trim
Post Frame.................................................................... 15-18
Residential..................................................................... 19
Mighti-Rib.................................................................20
General Notes................................................................21
System Components......................................................22-23
Accessories....................................................................24-25
Trim Details
Post Frame
Residential
Vented Eave & Eave............................................................42
Endwall & Sidewall................................................................43
Valley & Dormer Valley..........................................................44
Gambrel & Transition............................................................45
Pipe Boot & Skylight.............................................................46
Skylight Section A-A & B-B...................................................47
Chimney Details....................................................................48
Chimney Endwall & Ridge/Hip..............................................49
Vented Ridge & Gable..........................................................50
INTRODUCTION
The Right Tools.
This Standard Details Manual, AKA the Blue Book, is the right tool to have at your fingertips.
By knowing you have access to all of the right information from proper storage and installation
instructions to trim and flashing details, you can be confident installing your Fabral materials.
In addition, the Blue Book references the complete system components and accessories
allowing you plan ahead.
Use the Blue Book, and call us when further support is needed.
AGRICULTURAL
Fabral is the solution for your agricultural
applications. We know that your barns and
buildings must stand up to all weather conditions
and last through the years.
LIGHT COMMERCIAL
For your light commercial needs, Fabral offers metal
roofing and siding to match the various building
types.
RESIDENTIAL
Homeowners feel proud and confident with Fabral
metal roofing for the durability and sophisticated
appearance.
Fabral.com
CUSTOMER CARE
SYSTEM
SUPPORT
EDUCATION
PROJECT CONSULTING
TECHNICAL SUPPORT
INSTALLATION INSTRUCTIONS
Building Design and Construction
In order to ensure the anticipated performance and longevity,
protect metal panels from potentially corrosive situations and materials. When treated lumber will be in direct contact with metal
panels or flashings please note the following: Galvanized steel
is compatible with the CCA (Chromated Copper Arsenate) pressure-treated lumber that was predominantly used before 2004,
but not with the older Penta treated lumber or the new ACQ (Alkaline Copper Quartenary), CA (Copper Azole), or CBA (Copper
Boron Azole). Stainless steel or other special treated fasteners
should be used into these non-compatible pressure treated lumbers. Aluminum must be separated from contact with all treated
wood since the soluble copper in the preservative is corrosive to
aluminum. Likewise, dissimilar metals also require a protective
barrier between them to prevent galvanic corrosion. Request
FABRAL Technical Bulletins #803, 106, and 107 for more information on treated lumber and dissimilar metals.
Plastic, builders felt, bituminous paint, caulking, or gasket
material may be used to separate panels from treated wood and
dissimilar metals. When using aluminum panels in direct contact
with steel, use a separator as described above and fasten with
Stainless Steel screws.
Fertilizer, lime, acids, feeds, manure, soils, and many other
compounds also cause corrosion in metal panels. Contact between metal panels and any potentially corrosive materials should
be prevented.
Porous insulation materials may absorb and retain moisture,
and should not be used in direct contact with metal panels. Use a
vapor barrier such as polyethylene plastic or 30-lb felt to prevent
moisture from contacting both the insulation and the metal panel.
FABRALs translucent panels are intended for siding applications only. In all situations, foot traffic should be avoided on translucent panels. Translucent panels used in roofing applications will
break down in a short time and cause staining and premature
corrosion of the metal panels below. If used on roofs, apply butyl
caulking to separate the fiberglass panels from the metal. Translucent panels should be cleaned and sealed regularly, as recommended by the translucent panel manufacturer.
Purlins, Girts and Roof Deck
The substructure to which the metal panels are fastened must
be properly spaced and sufficiently thick to provide a roof or wall
system able to meet required design loads.
A 2 nominal lumber thickness or 1 nominal thickness are
both acceptable purlins. If snow guards are to be installed in the
future, a 2 x 8 purlin can be installed in the area for snow guard
installation. Call engineering for locations of 2 x 8 purlins. When
using purlins, FABRAL recommends a maximum spacing of 24
on-center (note that 5V requires solid decking). Pullout values decrease if the fasteners protrude completely through the purlins.
Kiln-dried softwood is recommended for purlins or decking (pine,
fir, hemlock, and spruce). Hardwoods are difficult to fasten into
without splitting and contain tannic acids that are corrosive to
metal panels. Green (non-kiln-dried) lumber may warp, twist, and
shrink as the wood seasons fully, causing waviness in the panels as
well as loosening and leaking of the fasteners.
Solid decking is highly recommended for all residential applications. When using solid decking or sheathing, always use 30-lb
felt or underlayment and plan on using closer fastener spacing
and larger diameter #14 screws. (Refer to the tables on page
31).
On re-roofing projects where the condition of the old decking
is in question, or where existing shingles will be left in place, new
Fastening
FABRAL can supply either screws or nails for fastening into
dimension lumber. Always use screws with solid sheathing.
Screws for use with steel panels are galvanized and then coated
with an organic polymer for optimum corrosion resistance. For
best results with aluminum panels, use #300 series stainless steel
screws.
Correct
Under-Driven
Over-Driven
STEEL PANELS
Grandrib 3
29 Gauge Steel, Plain and Painted Galvanized
3/4"Formed
Formed Width
37 37
3/4
Width
36" Coverage
36
Coverage
9"
9
3/4"
3/4
S
TTTTA
E
SN
NR
RE
ESCREW
AP
PW
WPATTERNS
ER
RC
CS
S
SNRE
TTAP
LIAN
NAIL
PATTERNS
All
Siding
ggIntermediate
nniiddiiS
ssnniillrruuPurlins
P
eettaaiid
rreettnnII
S llllA
A ddnnaaRoof
P ffooooR
Rand
deem
m
stroSupports
ppuS llA
All
Eavesssnand
Endlaps
Purlins
ffooooR
aallddnnE
ddnnaa sseevvaaE
niillrruuP
P
R -- s-sppRoof
E
E
MP Panel
SNRENAIL
TTAPPATTERNS
LIAN
sAll
troSupports
ppuS llA
S
TTTTA
E
SN
NR
RE
E
AP
PW
WPATTERNS
ER
RC
CS
S
SCREW
3/4" Formed Width
37 3/437Formed
Width
36" Coverage
36 Coverage
9"
9
ggIntermediate
nniiddiiS
ssnniillrrPurlins
uuP
eettaaAll
iiddeeSiding
m
S llllA
A ddnnaaRoof
P ffooooR
R
mrreettnnII
and
nniillrruuEndlaps
P
ppaallddnnPurlins
E
Eavesssand
P ffooooR
R ---ssRoof
E ddnnaa sseevvaaE
E
3/4"
3/4
*Not all profiles are available in all areas. Please contact Fabral for availability
Fabral.com
STEEL PANELS
NAIL PATTERN
Mighti-Rib
SCREW PATTERN
ROOFING - EAVES, RIDGES AND ENDLAPS
39 Formed Width
36 Coverage
Purlin
Bearing
Leg
12
1 1/4
5V Crimp
NAIL PATTERN
26"Formed
Formed Width
26
Width
24" Coverage
24
Coverage
1/2
1/2"
1
1"
1
1"
SCREW PATTERN
12"
12
1/2
1/2"
ProClad
Sidelap Detail
SCREW PATTERNS
Intermediate Roof Purlins and All Siding
36 Coverage
9
5/8
1 1/4 Corrugated
26 Formed Width
24 Coverage
1 1/4
SCREW PATTERN
1/4
2 1/2 Corrugated
NAIL PATTERN
SCREW PATTERN
ROOFING - EAVES, RIDGES, AND ENDLAPS
NAIL PATTERN
ROOFING - EAVES, RIDGES, AND ENDLAPS
ROOFING - INTERMEDIATE SUPPORTS
26 Formed Width
24 Coverage
2 2/3
1/2
*Not all profiles are available in all areas. Please contact Fabral for availability
STEEL PANELS
Prime Rib
3"
1"
1/2"
Grandbeam
7"
8
4"
9"
416
100
3"
18
134
134
StrongClad
36
5/8
*Not all profiles are available in all areas. Please contact Fabral for availability
Fabral.com
ALUMINUM PANELS
Grandrib 3
Recommended as a Liner Panel only
Strongrib
.018 Aluminum, Plain and Painted White
SCREW PATTERN
Correct Strongrib
Sidelap
BUTYL SEALANT
LOCATION (OPTIONAL
FIELD APPLIED)
PURLIN BEARING
LEG
3/4
9
36 Coverage (37 3/4 Formed Width)
2 1/2
Fabrib
ROOFING - EAVES, RIDGES, AND ENDLAPS
ROOFING - INTERMEDIATE SUPPORTS
SIDING - ALL SUPPORTS
51 3/16 Overall
2 2/3
3/4
48 Coverage
AluTwin
50 1/4 Overall
48 Coverage
8
2 1/2 Corrugated
7/16
1/2
*Not all profiles are available in all areas. Please contact Fabral for availability
Gambrel Roof
Slope Factor
3/12
4/12
5/12
6/12
8/12
10/12
12/12
1.031
1.054
1.083
1.120
1.202
1.302
1.414
Transition Roof
Flashing Conditions
Roof - Eave, Ridge, Gable, Sidewall, Endwall,
Valley, Hip, Transition, Gambrel, Soffits
Siding - Base Perimeter, Corners, Inside Corners,
Man Doors, Windows, Sliding Doors, Overhead
Doors
Please contact Fabrals Engineering Department for all your estimating & specification needs.
800.477.2741
717.735.1257 Fax
10
Fabral.com
Hip Roof
Fastener
#14 Woodtite
#14 Woodtite
#14 Woodtite
#14 Woodtite
#14 Woodtite
#14 Woodtite
#14 Woodtite
#14 Woodtite
#9 WoodFast
#9 WoodFast
Screws per Square
9"
275.6
12"
206.7
15"
165.4
18"
137.8
21"
118.1
24"
103.4
160
135.9
115.9
120
101.9
86.9
96
81.5
69.5
80
67.9
57.9
68.6
58.2
49.7
60
51.0
43.5
100.7
75.5
60.4
50.3
43.1
37.8
61.5
293
207.1
46.1
220.0
155.3
36.9
176.0
124.2
30.7
146.7
103.5
26.3
125.7
88.7
23.1
110.0
77.7
218.7
164.0
131.2
109.3
93.7
168.4
126.3
101.0
84.2
72.2
82.0
63.2
190
150
120
100
90
80
T he Above L oads and fas tener quantities are bas ed on the s tandard fas tening
s chedule s hown on page 6 of this book, with the fas tener having an embedment
depth of 1" into the s olid wood and penetrating the plywood or OS B . C ontact
F AB R AL for additional des ign information on our products .
UL RATINGS
UL790 Class A Fire Rating applies to all Steel panels 29 ga and thicker and
all Aluminum panels .032 and thicker.
UL2218 Class 4 Hail Impact Rating applies to all Steel panels 29 ga and
thicker and all Aluminum panels .032 and thicker.
11
12
Fabral.com
Zee
p. 18
Base
Guard
p. 35
Drip Cap
p. 36
J-Channel/
Doors/Windows
p. 36
Gable
p. 31
Endwall
p. 27
Inside Corner
p. 41
Ridge/Peak
p. 34
BUILDING DETAILS
POST FRAME
Sidewall
p. 28
Sliding Door
Track Cover
p. 39
Outside
Corner
p. 41
Eave
p. 26
RIDGE/PEAK
CHIMNEY
VALLEY
ENDWALL
PIPE PENETRATION
TRANSITION
SIDEWALL
EAVE
SKYLIGHT
GABLE/RAKE
HIP
BUILDING DETAILS
1. Determine the thickness and type of substrate to be used to support the metal roofing.
Solid decking is highly recommended for all residential applications
(i.e., plywood, OSB).
2. Refer to the Load-Span tables to select the proper fastener and spacing to meet loads on
your structure. Nails are NOT recommended for residential applications.
3. Consult local building codes and restrictions to determine acceptable methods of construction
for residential applications in your area.
4. Solid decking with 30# felt or synthetic underlayment for residential applications is
recommended. Ice & water shield or similar self-adhesive membrane is recommended at all
valleys, dormers, chimneys, transitions, skylights and other critical areas.
5. When re-roofing with metal panels over an existing shingle roof, metal panels may be installed
directly over shingles with underlayment, or 2x4 purlins or 1x4 furring strips.
6. Zip board sheathing, which has a built in vapor barrier, is an acceptable substrate
and vapor barrier.
7. Request Fabrals technical bulletins # 720 and # 721 for more details on residential roofing.
13
ALUMINUM
ROOF PANEL
STEP #1
DOWN SLOPE
STEEL
STEP #2
3 1/2"
10" To Sealant
FASTENERS @
ENDLAP PATTERN
ROOF PANEL
DOWN SLOPE
6 1/2"
2"
OVERLAPPING
FROM PURLIN EDGE
PR
EV
5
1
4
2
Panel
Name
Panel
Alu-Tuff
Name
EAVE
OVERHANG
1" TO 2"
(IN
"L"
ST
AR
TE
ND
3:12
Roof Slope
3 1/2:12
4:12
5:12
6:12
58
2 1/2:12
Minimum
Slope 2 1/2:12
61
3:12
64
3 1/2:12
67
4:12
73
5:12
78
6:12
Grandrib
Alu-Tuff 3
2 1/2:12
58
61
64
67
73
78
Prime Rib3
Grandrib
2 1/2:12
39
58
41
61
43
64
45
67
49
73
53
78
5V
Prime Rib
2 1/2:12
43
39
45
41
47
43
49
45
54
49
58
53
5V
2 1/2" Corrugated
2 1/2:12
28
43
29
45
31
47
32
49
35
54
38
58
1 1/2"
1/4" Corrugated
2
2 1/2:12
16
28
16
29
17
31
18
32
20
35
21
38
Alutwin
1 1/4" Corrugated
2 1/2:12
37
16
39
16
41
17
43
18
46
20
50
21
Fabrib
Alutwin
2 1/2:12
32
37
34
39
36
41
38
43
41
46
44
50
Fabrib
32 Rain-Carrying
34
36 Tables
38
44
2 1/2:12
41
Notes For
1. All values based on a 1-hour duration storm of 4"/hr. intensity.
Notes
For
2. Values represent the point
at which
theRain-Carrying
panel ribs will flood. Tables
1.
values
based on of
a 1-hour
duration
storm
of 4"/hr.
intensity.
3. All
Size
and frequency
penetrations
can
greatly
reduce
the amount of water removed from a rooof.
2.
represent
point
at which the panel ribs will flood.
4. Values
All panel
endlaps the
must
be caulked.
3.
Size
and
frequency
of
penetrations
can
greatly
reduce
thesidelaps.
amount of water removed from a rooof.
5. When weather-tightness is crtical, use sealant tape in all
4. All panel endlaps must be caulked.
5. When weather-tightness is crtical, use sealant tape in all sidelaps.
14
Fabral.com
ET
SKIRT BOARD OF
TREATED LUMBER OR
FOUNDATION OF BLOCK
12" TO 18" FROM
GROUND LEVEL
WI
ND
SIDELAP TAP
THIS EDG
ING
END
AIL
SIDELAP TAPE
THIS EDGE
SIDELAP TAPE
THIS EDGE
PURLIN
3 1/2"
12" Total Lap
INSTALLATION SEQUENCE
FOR STRONGRIB, GRANDRIB 3,
5V CRIMP, ALU-TWIN
ENDLAP TAPE
THIS EDGE
6 1/2"
2"
OVERLAPPING
FROM PURLIN EDGE
FE
AJ2
Jamb Trim
AJ3
J Channel
AJ4
Jamb Trim
AJ6
Jamb Trim
AJ5
Jamb Trim
RJ8
J Channel
PJFB
One Piece Door Trim
RJ9
F-J Trim
15
AG4
Gable
AC1
Corner
Longer Lengths
Available
AG1
Gable/Rake
Longer Lengths
Available
AC3
Corner
Longer Lengths
Available
AC2
Inside Corner
AC4
Corner
Longer Lengths
Available
1 1/16
RG1
Residential
Gable
WG1
Residential
Gable
Longer Lengths
Available
AH3
Double Door
Track Cover
16
Fabral.com
AH2
Door Track Cover
Longer Lengths
Available
AH4
Door Track
Cover
AH5
Door Track
Cover
AH6
Door Track
Cover
AR3
Ridge Cap
RR1
Universal
Ridge/Hip
Flash
CP1
Monoslope
Ridge
SB1
Snow Break
(2x4 Purlins)
2 1/8
1 1/2
3/4
1 1/2
3/4
AT1
Transition
Flash
CE1
Denver Eave
AT2
Gambrel
Flash
ASW1
Sidewall/Endwall
Flash
AEWN4
Notched
Endwall Flash
AGRN4
Notched
Gambrel Flash
Notched
17
AL6
Angle Flashing
AL2, 3, 4, 5
Angle Flashing
AL7
Angle Flashing
AL9
Angle Flashing
AL8
Angle Flashing
ABG1
Base
Guard
AL10
Angle Flashing
AB1
Soffit Box
AZ2
Zee
AB3
Soffit Box
AD1
Drip Cap
7 1/2"
AB2
Soffit Box
7 1/4"
AB4
Soffit Box
2 1/2"
RV1
Valley Flash
AE1
Eave Flash
RV2
W-Valley Flash
18
Fabral.com
RE1
Residential Eave
1 1/16
RG1
Residential
Gable
CE1
Denver Eave
AR3
Ridge Cap
RR1
Universal Ridge/Hip
Flash
RE1
Residential Eave
ASW1
Sidewall/
Endwall Flash
AG4
Gable
WG1
Residential
Gable
RV1
Valley Flash
RV2
W-Valley Flash
AT1
Transition Flash
CP1
Monoslope
Ridge
AT2
Gambrel
Flash
19
STANDARD MIGHTI-RIB
FH1
Head/Sill
Flashing
FR4
Ridge Cap
FE2
Eave Flashing
FT1
Endwall/
Transition Flash
FC4
Inside Corner
Flash
FC3
Gable/Outside
Corner Flash
FJ4
Zee Flash
FJ3
J Channel
Flashing
20
Fabral.com
GENERAL
NOTES
21
SYSTEM COMPONENTS
SNOW GUARDS
Exposed Fastener
Panel
Grandrib 3
Mighti-Rib
MP Panel
5V Crimp
2 1/2 Corrugated
ProClad
MINI
CL
#640
X
X
X
X
X
X
X
X
X
X
X
X
Fabral.com
SM
22
#20
CL Snow Guard
SM Snow Guard
SYSTEM COMPONENTS
FASTENERS
#9-16 WoodFast
#14-10 WoodTite
Plain or Painted
250/bag
Plain or Painted
250/bag
Plain or Painted
250/bag
Plain or Painted
250/bag
Plain
250/bag
Plain or Painted
250/bag
UNDERLAYMENT
30-Year Peel & Stick
PRODUCT SPECS:
50-Year Synthetic
PRODUCT SPECS:
30-Year Synthetic
PRODUCT SPECS:
25-Year Synthetic
PRODUCT SPECS:
Installation Requires
Installation Requires
Installation Requires
layment
mechanical fasteners
mechanical fasteners
mechanical fasteners
Roll Size: 3 W x 72 L
CONDENSTOP
Stop condensation with Fabral factory applied CondenStop. CondenStop saves time and money with reduced labor
costs and installation time versus other condensation barriers. Easily and effectively prevent condensation and the
problems caused by condensation by installing Fabral panels featuring CondenStop.
Protects assets and investments from moisture
Can be used in place of traditional vapor retarders
Adds to interior corrosion protection
23
ACCESSORIES
VENTING & CLOSURES
Ridge Cap Vent Specifications:
TRANSLUCENT PANELS
24
Fiberglass:
Polycarbonate:
Fabral.com
ACCESSORIES
PIPE BOOTS
EPDM Specifications:
Pipe Sizes:
Base Diameter
7 3/4
10 3/4
16 1/2
Item No.
3
5
8
min max
1/4
5
4 1/4 7 1/2
7
13
Silicon Specifications:
Color: orange
Up to 4500 F
Ranging for pipe sizes from 1 to 13
Larger sizes available on request
FLAT SHEETS
Product Specifications:
Used for field forming crickets around
chimney, skylights and penetrations,
and special flashing as necessary
29 gauge painted and plain galvanized
25
POST FRAME
TRIM DETAILS
INSIDE CLOSURE
BUTYL SEALANT TAPE TOP
& BOTTOM OF CLOSURE
OUTSIDE CLOSURE
(OPTIONAL)
ROOF PANEL
FLASH CE-1
FASTENER @ EVERY
MAJOR RIB
SIDING PANEL
ROOF PURLIN
POST
EAVE
ROOF TRUSS
TOP PLATE
INSIDE CLOSURE
BOX EAVE
26
Fabral.com
ROOF PANEL
TOP PLATE
FLASH CE-1
FASTENER @ 24" O.C. MAX.
F/J TRIM
SIDING PANEL
FASTENER
VENTED EAVE
PURLIN
ENDWALL
ROOF PANEL
OUSIDE CLOSURE
27
ENDWALL- NOTCHED
SIDING PANEL
FASTENER PER STANDARD EAVE PATTERN
GIRT
INSIDE CLOSURE
2" FASTENER @
EVERY MAIN RIB
NOTCHED FLASH
AEW-N4 OR AEW-N5
BUTYL SEALANT TAPE TOP
& BOTTOM OF CLOSURE
PURLIN
ROOF PANEL
OUSIDE CLOSURE
13. ENDWALL
- NOTCHED (PAGE 21)
SIDING PANEL
SIDEWALL
ROOF PANEL
28
Fabral.com
DORMER VALLEY
VALLEY
RV-2 SHOWN
SCREWS EACH SIDE OF MAIN RIB
(EAVE / ENDLAP PATTERN)
29
ROOF PANEL
2" FASTENER @
EVERY MAIN RIB
INSIDE
CLOSURE
OUSIDE
CLOSURE
ROOF PANEL
PURLIN
GAMBREL
INSIDE
CLOSURE
2" FASTENER @
EVERY MAIN RIB
FLASH AT-1
PURLIN
ROOF PANEL
OUSIDE CLOSURE
TRANSITION
30
Fabral.com
BOX GABLE
ROOF PANEL
VERSION 1
ROOF PURLIN
FASTENER @
24" O.C. MAX.
END RAFTER
FASTENER
24" O.C. MAX.
SIDING PANEL
BOX GABLE
VERSION 2
ROOF PANEL
FLASH AG-1
ROOF PURLIN
FASTENER @ EVERY
MAJOR RIB
FASTENER @
24" O.C. MAX.
BUTYL SEALANT TAPE
OUTSIDE CLOSURE
(OPTIONAL)
FASTENER @
24" O.C. MAX.
END RAFTER
BUTYL SEALANT TAPE
SIDING PANEL
31
GABLE
ROOF PANEL
VERSION 1
FLASH AG-4
FASTENER @ 24" O.C. MAX.
BUTYL SEALANT TAPE
PURLIN
FASTENER @ EVERY
MAJOR RIB
SIDING PANEL
END RAFTER
GABLE
VERSION 2
ROOF PANEL
FLASH AC-1 OR AC-4
FASTENER @ 24" O.C. MAX.
BUTYL SEALANT TAPE
PURLIN
FASTENER @ EVERY
MAJOR RIB
SIDING PANEL
END RAFTER
32
FLYING
GABLE
DETAIL
OVERHANG ROOF PANELS TO
CREATE APPROX. 1" OVERHANG
CE-1
UNDERLAYMENT
BUTYL SEALANT TOP &
BOTTOM OF SEALER STRIP
SEALER STRIP (ASPHALT
IMPREGNATED)
FASTENER
FASCIA BOARD
OUSIDE CLOSURE
SIDING
UNDERLAYMENT
ROOF STRUCTURE
MONOSLOPE RIDGE
SLOPING RAFTER
33
AR-3, RR-1
RIDGE FLASH
VENTED RIDGE
34
Fabral.com
2-1/2" FASTENER @
EVERY MAIN RIB
ROOF PANEL FASTENER
PER STANDARD PATTERN
CORRUGATED VENT
OPTIONAL J-CHANNEL FOR SUPPORT
UNDERLAYMENT
ROOF PANEL
ROOF STRUCTURE
BASE GUARD
8. ALT. VENTED RIDGE (PAGE 17)
SIDING PANEL
35
DOOR
HEADER
DOOR HEADER
SIDING PANEL
FASTENERS PER
FASTENER PATTERN
FLASH AD-1
FLASH AL-2, AL-3, AL-4,
AL-5, OR AL-7
DOOR STOP
DOOR
GIRT
DOOR JAMB
VERSION 1
DOOR JAMB
FASTENERS PER
FASTENER PATTERN
DOOR STOP
DOOR
FLASH PJFB
FASTENER
36
Fabral.com
DOOR JAMB
VERSION 2
GIRT
SIDING PANEL
FASTENERS PER
FASTENER PATTERN
DOOR JAMB
BUTYL SEALANT TAPE
FLASH AL-2, AL-3, AL-4, AL-5, OR AL-7
DEPENDING ON WIDTH OF JAMB
DOOR STOP
DOOR
FLASH AJ-3
FASTENER
DOOR JAMB
VERSION 3
GIRT
FASTENERS PER
FASTENER PATTERN
SIDING PANEL
BUTYL SEALANT TAPE
FLASH AJ-2
1 X 3 DOOR STOP
DOOR
37
OVERHEAD
DOOR JAMBS
VERSION 1
VERSION 3
GIRT
DOOR JAMB
GIRT
FASTENERS PER
FASTENER PATTERN
FASTENERS PER
FASTENER PATTERN
POST
POST
OVERHEAD DOOR
SIDING
PANEL
OVERHEAD DOOR
SIDING
PANEL
DOOR JAMB
DOOR JAMB
DOOR JAMB
FLASH AJ-4
FASTENER
1 X 3 GUIDE
FLASH AJ-3
VERSION 2
GIRT
FASTENERS PER
FASTENER PATTERN
SIDING
PANEL
VERSION 4
DOOR JAMB
GIRT
DOOR JAMB
FASTENERS PER
FASTENER PATTERN
POST
OVERHEAD DOOR
POST
OVERHEAD DOOR
SIDING PANEL
DOOR JAMB
DOOR JAMB
FASTENER
1 X 3 GUIDE
FLASH PJFB
BUTYL SEALANT TAPE
FASTENER
1 X 3 GUIDE
FLASH AJ-2
38
Fabral.com
SIDING PANEL
SIDING PANEL ON
SLIDING DOOR
FASTENERS PER
FASTENER PATTERN
FASTENERS PER
FASTENER PATTERN
FLASH AD-1
TRACK SUPPORT
FLOOR
2 X 6 TRACK BOARD
GRADE
WINDOW
SILL
WINDOW
HEADER
WINDOW UNIT
SIDING PANEL
1 X 6, BEVELED
FASTENERS PER
FASTENER PATTERN
BUTYL SEALANT TAPE
FLASH AJ-3
2X4
2X4
INSIDE CLOSURE
(OPTIONAL)
AD1 DRIP CAP
FASTENERS PER
FASTENER PATTERN
WINDOW UNIT
SIDING PANEL
WINDOW
JAMB
GIRT
SIDING PANEL
TRANSLUCENT
PANEL
2" FASTENER @ EVERY MAIN
RIB OR 12" O.C. MAX.
2X4
FLASH AZ-2
FASTENER
OPTIONAL BUTYL
SEALANT TAPE
FLASH AJ-3
WINDOW UNIT
FASTENERS PER
FASTENER PATTERN
BUTYL SEALANT TAPE
INSIDE CLOSURE
(OPTIONAL)
OUTSIDE CLOSURE
(OPTIONAL)
GIRT
BUTYL SEALANT TAPE
METAL SIDING OR
TRANSLUCENT ROOF PANEL
40
Fabral.com
FLASH AC-2
SIDING PANEL
FASTENERS PER
FASTENER PATTERN
INSIDE CORNER
VERSION 1
GIRT
SIDING PANEL
FASTENERS PER
FASTENER PATTERN
POST
VERSION 2
GIRT
SIDING PANEL
FASTENERS PER
FASTENER PATTERN
BUTYL SEALANT
TAPE
POST
FASTENER @
24" O.C. MAX.
FLASH AC-1 OR AC-4
OUTSIDE CORNERS
FASTENER @
24" O.C. MAX.
FLASH AC-1 OR AC-4
41
TRIM DETAILS
All residential flashings are formed for a 4/12 pitch unless otherwise requested by the customer.
ROOF PANEL
TOP PLATE
FLASH CE-1
FASTENER @ 24" O.C. MAX.
F/J TRIM
SIDING PANEL
FASTENER
RESIDENTIAL EAVE
44. RES. VENTED EAVE (PAGE 35)
ROOF STRUCTURE
UNDERLAYMENT
FLASH CE-1
FASTENER PER STANDARD
EAVE PATTERN
FASTENER @ 24" O.C. MAX.
42
Fabral.com
INSIDE CLOSURE
RESIDENTIAL ENDWALL
SIDING
2" FASTENER @
EVERY MAIN RIB
FLASH ASW-1
UNDERLAYMENT
ROOF STRUCTURE
ROOF PANEL
OUTSIDE CLOSURE
RESIDENTIAL SIDEWALL
47. RES. ENDWALL (PAGE 36)
SIDING
43
RESIDENTIAL VALLEY
SCREWS EACH SIDE OF MAIN RIB
(EAVE / ENDLAP PATTERN)
CUT ROOF PANEL
AS NECESSARY
RV-2 SHOWN
DORMER VALLEY
RIDGE TRIM
44
Fabral.com
RESIDENTIAL GAMBREL
ROOF PANEL
FASTENER PER STANDARD
EAVE PATTERN
UNDERLAYMENT
INSIDE CLOSURE
FLASH AT-2 OR AGR-N4
(GRANDRIB 3)
OUTSIDE CLOSURE
ROOF PANEL
ROOF STRUCTURE
RESIDENTIAL TRANSITION
BUTYL SEALANT TAPE TOP
& BOTTOM OF CLOSURE
2" FASTENER @
EVERY MAIN RIB
INSIDE CLOSURE
ROOF PANEL
FLASH AT-1
ROOF STRUCTURE
OUTSIDE CLOSURE
45
VENTILATION PIPE
ROOF PANEL
SKYLIGHT
46
Fabral.com
59. SKYLIGHT
UNDERLAYMENT
SECTION A-A
ROOF STRUCTURE
SKYLIGHT
SEALANT
UNDERLAYMENT
SECTION A-A
ROOF STRUCTURE
ROOF PANEL
SEALANT
2" FASTENER @
EVERY MAIN RIB
ASW-1 FLASHING FIELD MODIFIED TO FIT
BUTYL SEALANT TAPE TOP
& BOTTOM OF CLOSURE
FRAME
ROOF PANEL
OUTSIDE CLOSURE
UNDERLAYMENT
ROOF STRUCTURE
47
CHIMNEY DETAILS
VERSION 1
BRICK
1
2"
ROOF PANEL
UNDERLAYMENT
ROOF STRUCTURE
BRICK
CONTINUOUS SIKAFLEX
CAULK @ PERIMETER
ROOF PANEL
UNDERLAYMENT
ROOF STRUCTURE
48
Fabral.com
CHIMNEY ENDWALL
BRICK
SAW CUT REGLET 21" - 1" DEEP, BLOW OUT DUST &
FILL WITH SIKAFLEX SEALANT. SET FLASH & FASTEN
WITH COMPATIBLE MASONRY ANCHOR.
OUTSIDE CLOSURE
ROOF PANEL
UNDERLAYMENT
ROOF STRUCTURE
RESIDENTIAL RIDGE/HIP
2" FASTENER @ EVERY MAIN RIB
ROOF PANEL
49
ROOF PANEL
CORRUGATED VENT
BUTYL SEALANT TAPE TOP
& BOTTOM OF CLOSURE
OUTSIDE CLOSURE (ON HIP ROOFS USE 1" X 1"
X 19'-8" SEALER STRIP AND RR-1 FLASHING)
UNDERLAYMENT
ROOF STRUCTURE
RESIDENTIAL GABLE
ROOF PANEL
FASTENER
BUTYL TAPE
RG-1, WG-1, OR AG-4
SCREW FASTENER
@ 24" O.C. MAX.
ROOF STRUCTURE
UNDERLAYMENT
50
Fabral.com
WARRANTIES
Enduracote is a paint system that takes performance to the next level. Based on cutting edge
resin technology, this system offers unbeatable durability and superior long-term performance
against the elements.
The Enduracote Warranty
for Galvanized Panels
Lifetime film integrity for walls & roofs
30-year against fade & chalk for walls and roofs
10-year edge rust against acid rain
OTHER WARRANTIES
Polyester Paint Warranty
Please contact your Fabral representative for more information about Fabral warranties and paint systems.
51
COMPLETE
CONTACT INFORMATION
Contact by Phone - Nationwide Plant Locations
Lancaster, PA
(800) 477-2741
St. Joseph, MN
Cedar City, UT
Gridley, IL
(800) 432-2725
(800) 451-3974
Idabel, OK
(800) 926-8509
Marshfield, WI
(800) 528-0878
Contact by Email
info@fabral.com
Fabral.com/contact
GENERAL
NOTES
52
Fabral.com
Tifton, GA
(800) 873-3440
(800) 749-8144
Fabral.com
98-32-007 - 4/13