Professional Documents
Culture Documents
Wiring Rules
DIN
I/O Bus
These modules are intended for installation within the UL Listed enclosure
model UL-ENCL for UL 294 and UL 1076.
Direct Connect
Direct Connect
Direct Connect
Power Supply
PS 120/240 AC 50-U
PS 120/240 AC 50 1
PS 120/240 AC 85-U
PS 120/240 AC 85
PS 48 DC 50
Power Supply
PANEL
5
4
3
2
1
+24 VDC
24 VDC RETURN
SHIELD
COMM B
COMM A
Caution
Do not externally ground any input signal. This may damage the unit.
Signal return terminals are not connected to earth ground.
Remote Cable
I/O
4
3
2
1
Technical Specifications
+24 V Return
Contact
Closure
IN x
Reference
Resistor = OFF
DC Voltage
V
-
INx
Contact
Closure
RET
DIO-20
I/O x
Max DC Voltage:
GND
UI-8-10
UI-8-10-10V *
5V
10V
RET
Series-Parallel Circuits
INx
10 KW
11
12
10 KW
10 KW
Contact
Closure
INx
10 KW
Contact
Closure
RET
10 KW
RET
GND
INx
Contact
Closure
10 KW
10K
LED
Indicator
RET
Parallel Circuits
+5V
I/O x
INx
Contact
Closure
GND
5V
Digital logic
Input
10 KW
RET
DM-20 to DIO-20
Power Connection
Normally Closed
I/O x
GND
Reference
Resistor = ON
INx
Reference
Resistor = ON
Thermistor
Series Circuits
10 KW
Contact
Closure
DIO-20
+24 VDC
Normally Open
RET
I/O x
Connectors
IN x
10K
IN x
DM-20
Supervised Circuits
5V
Contact
Closure
Module
Power Req.
CPU (NetController)
10 W
UI-8-10 & UI-8-10-10V
0.7 W
DI-6 AC & DI-6 AC HV
0.7 W
DI-8; Digital Input Module
0.8 W
MI-6; MilliAmp Input Module
3.8 W
DM-20
0.5 W *
AO-4-8 & AO-4-8-O
3.8 W
DO-4-R & DO-4-R-O
2.8 W
DO-6-TR
1.1 W
LO-2 & LO-2-O
0.4 W
VT-1
1.5 W
AC-1
2.6 W *
AC-1A
2.0 W *
AC-1 Plus
2.2 W *
UI-8-10 / UI-8-10-10V
Digital logic
Signal
Remote
Connect
120 W
EOL Resistor
DM-20
+ -
I/O
DM-20 to DIO-20
Data Connection
Local Cable
I/O
I/O
Some modules include an integral ground clip. All modules include a screw
terminal connection for earth ground. It is important that this connection be
made as close to the module as possible.
DIO-20 Connections
I/O
Direct Connect
I/O Installation
CPU
Power Avail.
35 W
50 W
70 W
85 W
50 W
RET
DI-6 AC / DI-6-AC-HV
MI-6
DO-4-R / DO-4-R-O
VT-1
Polarity
Independent
LOAD
Supply
AC
Signal
DC
Signal
IN x
24V
Loop-Powered
Sensor
IN x
INx
OUT x
Signal
Voltage Range:
LOAD
DI-6-AC
DI-6-AC-HV
Max Current:
20 mA
20-132 Vrms
90-250 Vrms
Contact Rating:
DI-8
AO-4-8 / AO-4-8-O
DO-6-TR
Voltage Output
Digital logic
Signal
5A @ 240 VAC
5A @ 30 VDC
RJ-11
Telephone Line
+ ON
Current Output
Earth Ground
OUT 1
IN x
OUTx I
OUTx I
IN x
Contact
Closure
OUTx V
Device
Load
Resistance
RET
2KW
Device
Load
Resistance
650W
OUT x
LOAD
OUTx V
Common
FORM A
OUT 2
GND
GND
ON
11
12
Current Output:
0 - 20 mA
Output Rating:
Voltage Output:
0 - 10V
30 mA
LO-2 / LO-2-O
Lighting Output Module
For more information on these Andover Continuum products, see the I/O Systems
Reference, 30-3001-499, and the Power Supply Reference, 30-3001-702. For
documentation specific to Underwriters Laboratories (UL) evaluation, see the Note below.
Momentary Switch
UL 916 Listed product for the United States and Canada, Open
Energy Management Equipment.
PWR
24-30 VAC
OFF
ON
RED
GND
BLK
Output Rating:
OVERRIDE
Indicator
YEL
WHT
28 VAC
RECT
RED (ON)
RED
BLK
(OFF)
BLK
OVERRIDE
Occupancy Sensor
YEL
WHT
(COM)
BLU
(POWER)
WHT
28 VAC
RECT.
Note: Only these products mentioned in this document are evaluated by UL for UL 294
and UL 1076 applications:
UI-8-10
UI -8-10-10V
DI-8 (UL294 only)
DO-4