You are on page 1of 4

Skip Main Content and go to Footer Contents.

Autodesk Architectural Desktop: Interior Space Planning


Using Space Objects and Boundaries

By Ed Goldberg
Now that we've explored Autodesk Architectural Desktop software's massmodeling capabilities in Mass Modeling the Architectural Desktop Way and more
complex concepts in Making the Most of the MASSELEMENT > CONVERT
Command, we're ready to look at another design method, Space Objects and Space
Boundaries.
Use this method to organize spaces and functions according to a design program
or written plan that you and the client have developed. The concept of Space
Objects in Release 3 hasn't changed; it still represents a three-dimensional area.
Think of it as a room with ceilings, floors, walls, and so on. The Space Boundaries
feature hasn't changed either: think of Space Boundaries as helping you define the
walls and ceiling in this room.
Let's create a space plan using these tools to see how they can help you be more
productive.
Creating a Space Plan
The space we're going to create, a simple office plan, measures 50'x 45'. The
program developed for this project calls for
Eight offices of about 100 square feet each, ceiling height 8'-0".
Manager's office of about 150 square feet, ceiling height 8'-0".
Kitchen and lounge of about 75 square feet, ceiling height 8'-0".
250 square-foot conference room with storage, ceiling height 11'-0".
Coat storage of 40 square feet, ceiling height 8'-0".
Reception area of 250 square feet, ceiling height 9'-0".
Office manager's office and storage space of about 250 square feet
combined, ceiling height 8'-0".
Walkways and corridors of 435 square feet, ceiling height 8'-0".
1. Start a new drawing using the Aec arch [imperial] template, and activate the
Spaces and Space Boundaries toolbars.
2. Select the Space Styles icon from the Spaces toolbar to bring up the Style
Manager dialog box.

View Larger Image


Figure 1: The Style Manager dialog box, setting target areas for spaces.
3. At the Style Manager dialog box, purge the existing styles and create new space
styles for the spaces in your programkitchen, conference room, and so on.
Double-click each space style, which opens the Space Style Properties dialog box
for that space, and set its Target area (see Figure 1). When you're finished, click
OK.
4. Create a new layer called Total Space and make it the current layer.
5. Select the Rectangle icon from the Draw toolbar, and place a 50'x 45' wide

rectangle for the total space for this design.


6. Select the Add Spaces icon from the Spaces toolbar to bring up the Add Space
dialog box.
7. At the Add Space dialog box, choose the Small Office style, and place eight
small offices into the Total Space rectangle (see Figure 2).
Note: If you need to change the insertion point of an object, just click
the Drag Point icon in the Add Space dialog box to cycle through
insertion points. And don't worry about overall plan accuracy at this
point; we'll take care of that in a moment.

View Larger Image


Figure 2: Total Space Rectangle with eight "Small Office" Style Space
objects.
8. Now add the rest of the spaces to complete your plan.
If you've added all the spaces and you need to adjust one or more of them, open
the Properties dialog box; then while stretching a space with its grips, watch the
Area readout until the area is of the space is what you require. (see Figure 3).

View Larger Image


Figure 3: Adjusting Spaces via the Properties dialog box and grips.

Figure 4: Modifying Space Boundaries.

9. Check your walkways to see if they are wide enough. And create another space
style called Walkways.
10. Select the Modify Spaces icon from the Spaces toolbar.
11. Select all the offices, the closet, and the kitchen, and press the Enter key to
bring up the Modify Space dialog box.
12. At the Modify Space dialog box, change the Space Height to 8'-0", and press
OK.
13. Repeat Steps 10-12, selecting the Reception and Conference room, and make

their heights 9'-0" and 11'-0" respectively.


14. Select the Convert to Boundaries icon from the Space Boundaries toolbar.
15. Enter SP (for space) in the command line, and press Enter.
16. Select all the spaces, and press Enter to complete the command.
You have now placed space boundaries around all your spaces.
17. Select the Modify Boundary icon from the Space Boundaries toolbar.
18. Select all the space boundaries created in Steps 15 and 16 with a window
selection, and press Enter to bring up the Modify Space Boundary dialog box.
19. At the Modify Space Boundary dialog box, select the Solid Form radio button,
and uncheck the Manage Contained Spaces check box (see Figure 4).
20. Select the Properties icon next to the Question Mark icon at the bottom left of
the Modify Space Boundary dialog box to bring up the Space Boundaries
Properties dialog box.

View Larger Image


Figure 5: Setting Space Boundary Properties.
21. In this dialog box, select the Design Rules tab.
22. Un-check the Automatically Determine from Spaces check box in that tab.
23. Select the Ceiling Stops at Wall radio button, and set the Upper Extension to
2'-0", and then press the OK button (see Figure 5). Press the Apply button and
close the dialog boxes.
The Space boundaries are now 2'-0" above the ceiling heights of the spaces.

View Larger Image


Figure 6: Your basic Space Plan.
Conclusion
You have now created your basic Space Plan. At this point your plan is still
conceptual, and as in all space planning, the spaces will vary somewhat from the
program. The beauty of Autodesk Architectural Desktop 3 is that you can now
easily modify and refine your plan using your grips and dialog boxes.
In the next article, we will adjust and refine this plan, and quickly convert it into a
construction document.

You might also like