Dar (Civil) II

GOVERNMENT OF INDIA
(VOL. 2)
2016
All rights reserved. No part of this publication, either in English or in Hindi, may be reproduced in any form or by
any means, electronic or mechanical including photocopy, recording or any information storage and retrieval system,
without permission, in writing, from the Director General, CPWD, New Delhi.
DISCLAIMER
The Delhi Analysis of Rates is indicative, as coefficients for labour are likely to vary due to technological innovations,
skill of workman and other local factors affecting the efficiency and output of labour. Further its use by Govt.
Departments, PSUs, private bodies & individuals shall be at their own discretion. CPWD shall not be responsible for
any ambiguity, discrepancy, dispute or financial loss, arising directly or indirectly by using or following items of Delhi
Analysis of Rates by such Govt./Private bodies or individuals.
For feed back and suggestions, please contact SE(TAS),CPWD, Room No. 418, ''A'' Wing, Nirman Bhawan, New
Delhi.Tel No. 01123062339.Email: delsetascsq.cpwd@nic.in
A GOVERNMENT OF INDIA PUBLICATION

Published by
DIRECTOR GENERAL
CPWD, Nirman Bhawan, New Delhi - 110011
&
Printed & Marketed by
JAIN BOOK AGENCY
Authorised Dealers of Govt. Publications
C-9, Connaught Place, New Delhi-110001
Phones : 44556677, 23416390 upto 94
E-mail : sales@jainbookagency.com
Website : www.jainbookagency.com
JAIN BOOK DEPOT

C - 4, Opp. PVR Plaza, Post Box. No. 51,
Connaught Place, New Delhi-110001 (India)
Phone : 011- 23416101 / 02 / 03
E-mail : sales@jainbookdepot.com
JAIN BOOK AGENCY (SOUTHEND)

1, Aurobindo Place Market,
Hauz Khas, New Delhi-110016
Phone : 41755666
E-mail : sales@jainbookagency.com
Website : www.jainbookagency.com
JAIN BOOK AGENCY (GURGAON)

19, Central Plaza Mall, Sector 53,
Golf Course Road,
Gurgaon 122002 Haryana
Phone : 4143020
Mobile : 9810666810
JAIN BOOK AGENCY (INTERNATIONAL)

RA- 11, Sector- 126,
Opp. Gate No. 2A of Amity University,
Noida
Mobile. : 9210080580
JAIN BOOK AGENCY (GREATER NOIDA)

11 Jagat farm Complex
Gama Sector Market
Near OBC Bank
Greater Noida
Phone
: 0120-4206655
Distributed by
JBA DISTRIBUTORS
4574 / 15, 2nd Floor, Padamchand Marg,
Opposite Happy School, Darya Ganj, New Delhi- 110002
Tel.: 011-44332211, 44332222
E-mail : sales@jba.in
Website : www.jba.in
DIAL-A-BOOK
011-44332211
Books will be delivered next day by COURIER

(Payment to courier-boy)
in Delhi, Noida, Ghaziabad, Faridabad & Gurgaon (nominal courier charges extra)
ISBN : 978-81-932679-1-2
Also available at
All Leading Booksellers & Authorised Govt. Dealers In India
Price : Rs. 3000/- (for both volumes) excluding postage and forwarding charges etc.
Hkkjr ljdkj
Government of India
DIVAKAR GARG
dsUnzh; yksd fuekZ.k foHkkx

fuekZ.k Hkou] ubZ fnYyh 110011
Central Public Works Department
Nirman Bhawan, New Delhi- 110011
Tel : 23062556 / 1317, Fax : 23061884
E-Mail : cpwd_dgw@nic.in
Director General
FOREWORD
Central Public Works Department Analysis of Rates for Delhi is a very
comprehensive and useful document forming basis for the rates of various items.
It is based on scientific assessment of Inputs of materials, labour and machinery in
various items of work normally involved in civil construction projects.
It was first compiled in the year 1950, followed by subsequent publication or
revision in the years 1955, 1962, 1972, 1977, 1985, 1997, 2007, 2012, 2013 &
2014. Since publication of Analysis of Rates for Delhi 2014, prices of labour and
materials have registered some changes. Besides the decrease in the cost of
Cement and Steel, a number of new construction materials have also emerged.
Innovation & introduction of new technology and mechanization of construction
techniques have also taken place. This has necessitated revision of existing
Analysis of Rates for Delhi 2014 to include the above changes. Accordingly, this
Analysis of Rates for Delhi 2016 has been prepared.
The analysis of existing items has been updated in conformity with updated items of
works in DSR 2016.
I wish to place on record the technical input and the effective coordination on the
part of Shri Abhai Sinha, Special D.G.(HQ), Shri Balraj Chadha, ADG (TD),
Shri M.K. Sharma, Chief Engineer(CSQ) and the efforts put in by
Shri S.P. Chaudhary, Director (Tech & PR) and team of officers in CSQ unit in
finalizing Analysis of Rates for Delhi 2016 in a record time.
I am sure that C.P.W.D. Analysis of Rates for Delhi 2016 shall be very useful
document to various Central Govt. Ministries, Departments & Public Sector
Undertakings also besides various units of CPWD.
(Divakar Garg)
DIRECTOR GENERAL
Place : New Delhi
Date : July, 2016
PREFACE
1.
C.P.W.D. Analysis of Rates for Delhi 2016 is the revised edition of C.P.W.D. Analysis of Rates for
Delhi 2014.
2.
Analysis of Rates for Delhi 2016 incorporates most of the analysis of items of Analysis of Rates for
Delhi 2014 with updated correction slips, including analysis of existing items and also corresponding
new items introduced in DSR 2016.
3.
Analysis of Rates for Delhi, 2016 is published in two volumes i.e. volume I & II as under:
Volume
Number
Sub-head No.
Content/ Sub-head
One
00
01
02
03
04
05
06
07
08
09
10
11
12
Basic Rates
Carriage of Materials
Earth Work
Mortars
Concrete Work
Reinforced Cement Concrete
Brick Work
Stone Work
Marble & Granite Work
Wood and PVC Work
Steel Work
Flooring
Roofing
Two
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Finishing
Repairs to Buildings
Dismantling and Demolishing
Road Work
Sanitary Installations
Water Supply
Drainage
Pile work
Aluminium Work
Water Proofing
Rain Water Harvesting & Tubewells
Conservation of Heritage Buildings.
Structural Glazing Aluminium Composite Panel
New Technologies and Materials
V
4.
Analysis of few existing items in sub head - 4 (RCC Work) and 18 (Water Supply) have been
deleted. Similarly, analysis of many items have been modified to correspond to items of DSR
2016. Several new analysis and sub items have been introduced in Analysis of Rates for Delhi
2016. Labour coefficients for items of dry stone cladding, stone jali work in sub head 07 have also
been modified. Similarly, the labour coefficient for marble work 08 have also been modified.
5.
Analysis of Rates for Delhi, 2016 is based on the study of current market rates of materials at
Delhi, prevailing as on 01-04-2016. The basic rates of materials, incorporated in the analysis,
pertain to materials conforming to BIS Standards/ CPWD Specifications/Materials of good quality
generally available in the market. Labour rates are taken from the minimum wages issued by the
Government of Delhi and Central Govt. (whichever is higher) w.e.f. 01.04.2016.
6.
The nomenclatures of main items have been printed along with the analysis of first Sub item only to
conserve the space and number of pages.
7.
Sundries have been considered as 1.73 times based on Cost Index of Delhi as on 01.04.2016
(102) with base as per PAR-2012 as 100.
8.
Lot of efforts have gone into the preparation of this Analysis of Rates for Delhi 2016. I convey my
deep appreciation and sincere thanks to Shri M K Sharma CE(CSQ), Shri S P Chaudhary, Director
(T& PR), Shri P.P Singh, SE (QA-cum-TLC), Shri S.K. Srivastava,E EE (QA) Shri D.K.
Choudhary, EE (QA) and team, Shri Sanjeev Rastogi , SE (C& M), Shri Virender Kumar, EE
(C), Shri Keshav Ram, EE (M) and his team, Shri R B Garg, EE(TAS-II), Shri K R Meena,
EE(TAD) and his team, Shri D.S. Adhikari, AE (QA) and other officers and staff of CSQ unit
whose names are not mentioned here, for sincere efforts made in the preparation of this document
in such a short time. Various Committees and field units, who contributed field inputs, also deserve
appreciation for their timely help.
9.
Due care has been taken to print the C.P.W.D. Analysis of Rates for Delhi as correctly as possible.
It is, however possible that some errors might have crept in. In case any error or omission is
noticed, it may be brought to the notice of the Superintending Engineer (TAS), CPWD, Room no.
418, A-wing, Nirman Bhawan, New Delhi.
(Balraj Chadha)
ADG (TD), CPWD,
Nirman Bhawan, New Delhi.
New Delhi
Dated: July, 2016
VI
C O N T E N T S
Vol. 1
SH. No.
NAME OF SUB-HEAD
PAGE No.
A.
BASIC RATES
0.1
HIRE CHARGES OF PLANTS & MACHINERY
3-5
0.2
LABOUR
6-7
0.3
MATERIALS
0.4
CARRIAGE CODES
B.
SUB -HEADS
1.
Carriage of Materials
2.
Earth Work
3.
Mortars
125-134
4.
Concrete Work
135-166
5.
Reinforced Cement Concrete
167-246
6.
Brick Work
247-282
7.
Stone Work
283-342
8.
Marble & Granite Work
343-358
9.
Wood and PVC Work
359-576
10.
Steel Work
577-616
11.
Flooring
617-690
12.
Roofing
691-766
8-63
64-66
67-78
79-124
VII
C O N T E N T S
Vol. 2
SH. No.
NAME OF SUB-HEAD
PAGE No.
13
Finishing
767-828
14
Repairs to Building
829-900
15
Dismantling and Demolishing
901-938
16
Road Work
17
Sanitary Installations
1067-1162
18
Water Supply
1163-1388
19
Drainage
1389-1482
20
Pile work
1483-1510
21
Aluminium Work
1511-1538
22
Water Proofing
1539-1566
23
Rain Water Harvesting & Tubewells
1567-1586
24
Conservation of Heritage Buildings.
1587-1594
25
Structural Glazing Aluminium Composite Panel
1595-1606
26
New Technologies and Materials
1607-1664
939-1066
Note: For Sub Heads 1 to 12 refer to Vol. 1
VIII
SUB HEAD : 13.0
FINISHING
767
13.1
12 mm cement plaster of mix :
13.1.1
1:4 (1 cement: 4 fine sand)
Code
3.4
0155
0115
0101
9999
13.1.2
Code
3.6
0155
0115
0101
9999
Description
Detail of cost for 10 sqm
MATERIAL
Cement mortar 1 : 4 (1 cement : 4 fine sand)
Rate as per Item Number 3.4 of SH: Mortars
LABOUR
Mason (average)
Coolie
Bhisti
Scaffolding and sundries
TOTAL
Add 1 % Water charges
TOTAL
Add 15 % Contractor's profit and overheads
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.144
3499.70
503.96
day
day
day
L.S.
0.67
0.75
0.92
12.61
467.00
368.00
407.00
1.73
312.89
276.00
374.44
21.82
1489.11
14.89
1504.00
225.60
1729.60
172.96
172.95
Unit
Quantity
cum
0.144
2746.70
395.52
day
day
day
L.S.
0.67
0.75
0.92
12.61
467.00
368.00
407.00
1.73
312.89
276.00
374.44
21.82
1380.67
13.81
1394.48
209.17
1603.65
160.36
160.35

Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
Amount
13.2
15 mm cement plaster on the rough side of single or half brick wall of mix :
13.2.1
Code
Description
Unit
Quantity
3.4

MATERIAL
LABOUR
Mason (average)
Coolie
cum
0.172
3499.70
601.95
day
day
0.80
0.88
467.00
368.00
373.60
323.84
0155
0115
SUB HEAD : 13- FINISHING
769
Rate
Amount
Code
Description
Unit
Quantity
0101
9999
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
day
L.S.
0.99
12.61
Unit
Quantity
cum
0.172
2746.70
472.43
day
day
day
L.S.
0.80
0.88
0.99
12.61
467.00
368.00
407.00
1.73
373.60
323.84
402.93
21.82
1594.62
15.95
1610.57
241.59
1852.16
185.21
185.20
Unit
Quantity
cum
0.224
3499.70
783.93
day
day
day
L.S.
0.94
1.02
1.10
12.61
467.00
368.00
407.00
1.73
438.98
375.36
447.70
21.82
2067.79
20.68
2088.47
313.27
2401.74
240.17
240.15
13.2.2
Code
3.6
0155
0115
0101
9999
Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.3.1
3.4
0155
0115
0101
9999
407.00
1.73
Amount
402.93
21.82
1724.14
17.24
1741.38
261.21
2002.59
200.25
200.25
13.3
Code
Rate
Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
770
Rate
Rate
Amount
Amount
13.3.2
Code
3.6
0155
0115
0101
9999

Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.4
13.4.1
1:4 (1 cement: 4 coarse sand)
Code
3.9
0155
0115
0101
9999
13.4.2
Code
3.11
0155
0115
Description
MATERIAL
Cement mortar 1 : 4 (1 cement :
4 coarse sand)
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
cum
0.224
2746.70
615.26
day
day
day
L.S.
0.94
1.02
1.10
12.61
467.00
368.00
407.00
1.73
438.98
375.36
447.70
21.82
1899.12
18.99
1918.11
287.72
2205.83
220.58
220.60
Unit
Quantity
cum
0.144
3970.50
571.75
day
day
day
L.S.
0.67
0.75
0.92
12.61
467.00
368.00
407.00
1.73
312.89
276.00
374.44
21.82
1556.90
15.57
1572.47
235.87
1808.34
180.83
180.85
Unit
Quantity
cum
0.144
3217.50
463.32
day
day
0.67
0.75
467.00
368.00
312.89
276.00
Rate
Amount
Amount

Description
MATERIAL
6 coarse sand)
LABOUR
Mason (average)
Coolie
771
Rate
Amount
Code
Description
Unit
Quantity
0101
9999
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
day
L.S.
0.92
12.61
Rate
Amount
407.00
1.73
374.44
21.82
1448.47
14.48
1462.95
219.44
1682.39
168.23
168.25
13.5
15 mm cement plaster on rough side of single or half brick wall of mix:
13.5.1
Code
3.9
0155
0115
0101
9999
13.5.2
Code
3.11
0155
0115
0101
9999
Description
MATERIAL
4 coarse sand)
Rate as per Item Number 3.9 of
SH: Mortars
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.172
3970.50
682.93
day
day
day
L.S.
0.80
0.88
0.99
12.61
467.00
368.00
407.00
1.73
373.60
323.84
402.93
21.82
1805.12
18.05
1823.17
273.48
2096.65
209.66
209.65
Unit
Quantity
cum
0.172
3217.50
553.41
day
day
day
L.S.
0.80
0.88
0.99
12.61
467.00
368.00
407.00
1.73
373.60
323.84
402.93
21.82
1675.60
16.76
1692.36
253.85
1946.21
194.62
194.60

Description
MATERIAL
6 coarse sand)
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
772
Rate
Amount
13.6
13.6.1
Code
3.9
0155
0115
0101
9999
13.6.2
Code
3.11
0155
0115
0101
9999
Description
MATERIAL
4 coarse sand)
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.224
3970.50
889.39
day
day
day
L.S.
0.94
1.02
1.10
12.61
467.00
368.00
407.00
1.73
438.98
375.36
447.70
21.82
2173.25
21.73
2194.98
329.25
2524.23
252.42
252.40
Unit
Quantity
cum
0.224
3217.50
720.72
day
day
day
L.S.
0.94
1.02
1.10
12.61
467.00
368.00
407.00
1.73
438.98
375.36
447.70
21.82
2004.58
20.05
2024.63
303.69
2328.32
232.83
232.85

Description
MATERIAL
6 coarse sand)
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
Amount
13.7
12 mm cement plaster finished with a floating coat of neat cement of mix :
13.7.1
Code
Description
Unit
Quantity
3.3

MATERIAL
cum
0.144
773
Rate
4252.70
Amount
612.39
Code
0155
0115
0101
9999
0367
2209
0155
0115
9999
13.7.2
Code
3.4
0155
0115
0101
9999
0367
2209
0155
0115
9999
Description
LABOUR
Mason (average)
Coolie
Bhisti
Portland Cement (OPC-43 grade)
Carriage of Cement
Mason (average)
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
day
L.S.
tonne
tonne
day
day
L.S.
0.67
0.75
0.92
12.61
0.02
0.02
0.27
0.27
8.06
Rate
467.00
368.00
407.00
1.73
5700.00
92.24
467.00
368.00
1.73
Amount
312.89
276.00
374.44
21.82
114.00
1.84
126.09
99.36
13.94
1952.77
19.53
1972.30
295.85
2268.15
226.81
226.80

Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
Carriage of Cement
Mason (average)
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.144
3499.70
503.96
day
day
day
L.S.
tonne
tonne
day
day
L.S.
0.67
0.75
0.92
12.61
0.02
0.02
0.27
0.27
8.06
467.00
368.00
407.00
1.73
5700.00
92.24
467.00
368.00
1.73
312.89
276.00
374.44
21.82
114.00
1.84
126.09
99.36
13.94
1844.34
18.44
1862.78
279.42
2142.20
214.22
214.20
13.8
15 mm cement plaster on rough side of single or half brick wall finished with a
floating coat of neat cement of mix :
13.8.1
Code
Description
Unit
Quantity
3.3

MATERIAL
cum
0.172
774
Rate
4252.70
Amount
731.46
Code
0155
0115
0101
9999
0367
2209
0155
0115
9999
13.8.2
Code
3.4
0155
0115
0101
9999
0367
2209
0155
0115
9999
Description
LABOUR
Mason (average)
Coolie
Bhisti
Carriage of Cement
Mason (average)
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
day
L.S.
tonne
tonne
day
day
L.S.
0.80
0.88
0.99
12.61
0.02
0.02
0.27
0.27
8.06
Rate
467.00
368.00
407.00
1.73
5700.00
92.24
467.00
368.00
1.73
Amount
373.60
323.84
402.93
21.82
114.00
1.84
126.09
99.36
13.94
2208.88
22.09
2230.97
334.65
2565.62
256.56
256.55

Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
Carriage of Cement
Mason (average)
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.172
3499.70
601.95
day
day
day
L.S.
tonne
tonne
day
day
L.S.
0.80
0.88
0.99
12.61
0.02
0.02
0.27
0.27
8.06
467.00
368.00
407.00
1.73
5700.00
92.24
467.00
368.00
1.73
373.60
323.84
402.93
21.82
114.00
1.84
126.09
99.36
13.94
2079.37
20.79
2100.16
315.02
2415.18
241.51
241.50
13.9
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of
neat cement.
13.9.1
12 mm cement plaster
Code
Description
Unit

MATERIAL
Cement mortar 1:3 (1 cement : 3 coarse sand)
775
Quantity
Rate
Amount
Code
Description
Unit
Quantity
3.8

LABOUR
Mason (average)
Coolie
Bhisti
Carriage of Cement
Mason (average)
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
cum
0.144
4723.50
680.18
day
day
day
L.S.
tonne
tonne
day
day
L.S.
0.67
0.75
0.92
12.61
0.02
0.02
0.27
0.27
8.06
467.00
368.00
407.00
1.73
5700.00
92.24
467.00
368.00
1.73
312.89
276.00
374.44
21.82
114.00
1.84
126.09
99.36
13.94
2020.56
20.21
2040.77
306.12
2346.89
234.68
234.70
0155
0115
0101
9999
0367
2209
0155
0115
9999
13.9.2
Code
3.8
0155
0115
0101
9999
0367
2209
0155
0115
9999
13.10
Code
Rate
Amount
20 mm cement plaster
Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
Carriage of Cement
Mason (average)
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.224
4723.50
1058.06
day
day
day
L.S.
tonne
tonne
day
day
L.S.
0.94
1.02
1.10
12.61
0.02
0.02
0.27
0.27
8.06
467.00
368.00
407.00
1.73
5700.00
92.24
467.00
368.00
1.73
438.98
375.36
447.70
21.82
114.00
1.84
126.09
99.36
13.94
2697.15
26.97
2724.12
408.62
3132.74
313.27
313.25
15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating

coat of neat cement on the rough side of single or half brick wall.
Description
Unit

MATERIAL
Cement mortar 1:3 (1 cement :
3 coarse sand)
776
Quantity
Rate
Amount
Code
Description
Unit
Quantity
3.8

LABOUR
Mason (average)
Coolie
Bhisti
Carriage of Cement
Mason (average)
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
cum
0.172
4723.50
812.44
day
day
day
L.S.
tonne
tonne
day
day
L.S.
0.80
0.88
0.99
12.61
0.02
0.02
0.27
0.27
8.06
467.00
368.00
407.00
1.73
5700.00
92.24
467.00
368.00
1.73
373.60
323.84
402.93
21.82
114.00
1.84
126.09
99.36
13.94
2289.86
22.90
2312.76
346.91
2659.67
265.96
265.95
0155
0115
0101
9999
0367
2209
0155
0115
9999
13.11
Code
3.10
3.6
0155
0115
0101
9999
Rate
Amount
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5
(1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster
1:6 (1 cement : 6 fine sand).
Description
MATERIAL
Under layer Cement mortar
1 : 5 (1 cement : 5 coarse sand)
Top layer Cement mortar 1 : 6
(1 cement : 6 fine sand)
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
777
Unit
Quantity
Rate
Amount
cum
0.144
3565.05
513.37
cum
0.072
2746.70
197.76
day
day
day
L.S.
1.21
1.29
1.05
12.61
467.00
368.00
407.00
1.73
565.07
474.72
427.35
21.82
2200.09
22.00
2222.09
333.31
2555.40
255.54
255.55
13.12
Code
3.10
3.8
0155
0115
0101
9999
13.13
Code
3.12
0155
0115
0101
9999
13.14
Code
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5
(1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1
cement : 3 coarse sand) finished rough with sponge.
Description
MATERIAL
Under layer Cement mortar 1 : 5
(1 cement : 5 coarse sand)
Top layer Cement mortar 1:3
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.144
3565.05
513.37
cum
0.072
4723.50
340.09
day
day
day
L.S.
1.21
1.29
1.05
12.61
467.00
368.00
407.00
1.73
565.07
474.72
427.35
21.82
2342.42
23.42
2365.84
354.88
2720.72
272.07
272.05
12 mm cement plaster 1:2 (1 cement : 2 stone dust).

Description
MATERIAL
Cement mortar 1:2 (1 Cement : 2 stone dust)
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.144
5233.50
753.62
day
day
day
L.S.
0.67
0.75
0.92
12.61
467.00
368.00
407.00
1.73
312.89
276.00
374.44
21.82
1738.77
17.39
1756.16
263.42
2019.58
201.95
201.95
15 mm cement plaster 1:2 (1 cement : 2 stone dust) on the rough side of single
or half brick wall.
Description
Unit

MATERIAL
778
Quantity
Rate
Amount
Code
Description
Unit
Quantity
3.12

LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
cum
0.172
5233.50
900.16
day
day
day
L.S.
0.80
0.88
0.99
12.61
467.00
368.00
407.00
1.73
373.60
323.84
402.93
21.82
2022.35
20.22
2042.57
306.39
2348.96
234.89
234.90
0155
0115
0101
9999
13.15
Code
3.12
0155
0115
0101
9999
Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.16.1
1:3 (1 cement : 3 fine sand)
3.3
0155
0115
0101
9999
Amount
20 mm cement plaster 1:2 (1 cement : 2 stone dust).
13.16
Code
Rate
Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
Extra for removing burrs, cleaning with
wire brushes, pock making with pointed
tool etc. complete.
779
Unit
Quantity
Rate
cum
0.224
5233.50
1172.30
day
day
day
L.S.
0.94
1.02
1.10
12.61
467.00
368.00
407.00
1.73
438.98
375.36
447.70
21.82
2456.16
24.56
2480.72
372.11
2852.83
285.28
285.30
Unit
Quantity
cum
0.072
4252.70
306.19
day
day
day
0.51
0.75
0.92
467.00
368.00
407.00
238.17
276.00
374.44
L.S.
13.39
1.73
23.16
Rate
Amount
Amount
Code
Description
Unit
Quantity
9999

TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
11.70
13.17
Code
3.3
0155
0115
0101
9999
9999
0367
2209
0155
0115
9999
0776
9999
9999
0141
0115
9999
13.18
Rate
1.73
Amount
20.24
1238.20
12.38
1250.58
187.59
1438.17
143.81
143.80
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of
neat cement and thick coat of Lime wash on top of walls when dry for bearing
of R.C.C. slabs and beams.
Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
Extra for removing burrs, cleaning with wire
brushes, pock making with pointed tool etc.
complete.
Carriage of Cement
Mason (average)
Coolie
Satna lime
Indigo gum etc
Sundries ladder etc.
White Washer
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.072
4252.70
306.19
day
day
day
0.51
0.75
0.92
467.00
368.00
407.00
238.17
276.00
374.44
L.S.
L.S.
tonne
tonne
day
day
L.S.
quintal
L.S.
L.S.
day
day
L.S.
13.39
11.7
0.02
0.02
0.27
0.27
8.06
0.01
2.08
0.52
0.07
0.07
2.73
1.73
1.73
5700.00
92.24
467.00
368.00
1.73
370.00
1.73
1.73
407.00
368.00
1.73
23.16
20.24
114.00
1.84
126.09
99.36
13.94
3.70
3.60
0.90
28.49
25.76
4.72
1660.60
16.61
1677.21
251.58
1928.79
192.87
192.85
Neat cement punning.
Code
Description
0367
2209

LABOUR
Carriage of Cement
780
Unit
Quantity
tonne
tonne
0.022
0.022
Rate
5700.00
92.24
Amount
125.40
2.03
Code
Description
Unit
Quantity
0155
0115
9999
Mason (average)
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
day
day
L.S.
0.27
0.27
8.06
Rate
467.00
368.00
1.73
Amount
126.09
99.36
13.94
366.82
3.67
370.49
55.57
426.06
42.60
42.60
13.19
Rough cast plaster upto 10 m height above ground level with a mixture of sand
and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over
and including the fresh plaster in two layers, under layer 12 mm cement plaster
1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement
: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.
13.19.1
Ordinary cement finish using ordinary cement
Code
3.9
0155
0114
0101
9999
3.3
0155
0114
0101
9999
1179
0101
0777
9977
0155
0114
0101
9999
0123
Description
MATERIAL
Under layer 12 mm thick cement plaster
4 coarse sand)
SH: Mortars
LABOUR
Mason (average)
Beldar
Bhisti
Top layer 10 mm thick cement plaster
3 fine sand)
SH: Mortars
Mason (average)
Beldar
Bhisti
Crushed stone 2.36 mm to 12.5 mm size
Bhisti
Dry hydrated lime (factory made)
Carriage of lime
Mason (average)
Beldar
Bhisti
Labour for scooping
Mason (brick layer) 1st class
781
Unit
Quantity
Rate
Amount
cum
0.144
3970.50
571.75
day
day
day
L.S.
0.67
0.75
0.92
9.88
467.00
368.00
407.00
1.73
312.89
276.00
374.44
17.09
cum
day
day
day
L.S.
cum
day
quintal
L.S.
day
day
day
L.S.
0.12
0.61
0.69
0.85
9.88
0.10
0.01
0.09
3.64
0.50
0.50
0.10
9.88
4252.70
467.00
368.00
407.00
1.73
900.00
407.00
280.00
1.73
467.00
368.00
407.00
1.73
510.32
284.87
253.92
345.95
17.09
90.00
4.07
25.20
6.30
233.50
184.00
40.70
17.09
day
0.25
487.00
121.75
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
day
0.25
13.20
Code
3.9
0155
0114
0101
9999
3.3
0155
0114
0101
9999
1179
0101
0777
9977
0155
0114
0101
9999
9999
Rate
368.00
Amount
92.00
3778.93
37.79
3816.72
572.51
4389.23
438.92
438.90
Pebble dash plaster upto 10 m height above ground level with a mixture of
washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over
and including fresh plaster in two layers under layer 12 mm cement plaster 1:4
(1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement
mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated
lime by volume of cement.
Description
MATERIAL
Under layer 12 mm thick cement plaster
4 coarse sand)
LABOUR
Mason (average)
Beldar
Bhisti
Top layer 10 mm thick cement plaster
Mason (average)
Beldar
Bhisti
Bhisti
Carriage of lime
Mason (average)
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
782
Unit
Quantity
Rate
Amount
cum
0.144
3970.50
571.75
day
day
day
L.S.
0.67
0.75
0.92
9.88
467.00
368.00
407.00
1.73
312.89
276.00
374.44
17.09
cum
day
day
day
L.S.
cum
day
quintal
L.S.
day
day
day
L.S.
L.S.
0.12
0.61
0.69
0.85
9.88
0.10
0.01
0.09
3.64
0.50
0.50
0.10
9.88
4.42
4252.70
467.00
368.00
407.00
1.73
900.00
407.00
280.00
1.73
467.00
368.00
407.00
1.73
1.73
510.32
284.87
253.92
345.95
17.09
90.00
4.07
25.20
6.30
233.50
184.00
40.70
17.09
7.65
3572.83
35.73
3608.56
541.28
4149.84
414.98
415.00
13.21
Code
1213
9999
13.22
Code
9999
0155
0115
0101
9999
Extra for providing and mixing water proofing material in cement plaster work
in proportion recommended by the manufacturers.
Description
Unit
Detail of cost for 12mm cement plaster 1:3

(1 cement :3 sand) = 10 sqm or 1.48 bags
of cement used in the mix.
Cement required for 10 sqm = 73.89kg.
Water proofing material required @ 1 kg per
50 kg of cement = 1.48 kg.
Water proofing materials
Sundries
TOTAL
TOTAL
Cost of 1.48 bags of cement used in the mix.
Cost of 1.00 bag of 50 kg cement used
in the mix.
Say
kilogram
L.S.
Quantity
1.48
7.15
Rate
35.00
1.73
Extra for plastering exterior walls of height more than 10 m from ground level
for every additional height of 3 m or part thereof.
Description
LABOUR
Mason (average)
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
L.S.
53.82
1.73
93.11
day
day
day
L.S.
0.20
0.30
0.10
7.15
467.00
368.00
407.00
1.73
93.40
110.40
40.70
12.37
349.98
3.50
353.48
53.02
406.50
40.65
40.65
Extra for plastering on circular work not exceeding 6 m in radius:
13.23.1
In one coat
0155
0114
9999
51.80
12.37
64.17
0.64
64.81
9.72
74.53
50.35
50.35
13.23
Code
Amount
Description
LABOUR
Mason (average)
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
783
Unit
Quantity
day
day
L.S.
0.20
0.20
7.15
Rate
467.00
368.00
1.73
Amount
Amount
93.40
73.60
12.37
179.37
1.79
181.16
27.17
208.33
20.83
20.85
13.23.2
Code
0155
0114
9999
In two coats
Description
LABOUR
Mason (average)
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
L.S.
0.30
0.30
13.39
Rate
467.00
368.00
1.73
Amount
140.10
110.40
23.16
273.66
2.74
276.40
41.46
317.86
31.78
31.80
13.24
Extra for plastering done on moulding, cornices or architraves including neat

finish to line and level:
13.24.1
In one coat
Code
0155
0114
0115
0101
9999
13.24.2
Code
0155
0114
0115
0101
9999
Description
LABOUR
Mason (average)
Beldar
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
day
day
L.S.
3.00
2.00
1.00
0.25
13.39
Unit
Quantity
day
day
day
day
L.S.
5.00
3.00
2.00
0.33
13.39
Rate
467.00
368.00
368.00
407.00
1.73
Amount
1401.00
736.00
368.00
101.75
23.16
2629.91
26.30
2656.21
398.43
3054.64
305.46
305.45
In two coats
Description
LABOUR
Mason (average)
Beldar
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
784
Rate
467.00
368.00
368.00
407.00
1.73
Amount
2335.00
1104.00
736.00
134.31
23.16
4332.47
43.32
4375.79
656.37
5032.16
503.21
503.20
13.25
Extra for plastering:
13.25.1
Spherical ceiling
Code
0155
0114
9999
13.25.2
Code
0155
0114
9999
13.25.3
Code
0155
0114
9999
Description
LABOUR
Mason (average)
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
L.S.
0.75
0.74
26.91
Unit
Quantity
day
day
L.S.
0.80
0.80
34.06
Unit
Quantity
day
day
L.S.
0.50
0.50
13.39
Rate
467.00
368.00
1.73
Amount
350.25
272.32
46.55
669.12
6.69
675.81
101.37
777.18
77.71
77.70
Groined ceiling
Description
LABOUR
Mason (average)
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
467.00
368.00
1.73
Amount
373.60
294.40
58.92
726.92
7.27
734.19
110.13
844.32
84.43
84.45
Flewing soffits
Description
LABOUR
Mason (average)
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
785
Rate
467.00
368.00
1.73
Amount
233.50
184.00
23.16
440.66
4.41
445.07
66.76
511.83
51.18
51.20
13.26
Code
0869
9977
0122
0114
9999
13.27
Code
0155
0114
9999
Providing and applying plaster of paris putty of 2 mm thickness over plastered

surface to prepare the surface even and smooth complete.
Description
Unit

MATERIAL
Plaster of paris 10x0.002x1121 = 22.42kg
Add 2% wastage= 0.45kg
Total = 22.87kg
Say23kg
Plaster of Paris
Carriage of plaster of paris
LABOUR
Mason (for plaster of paris work) 1st class
Beldar
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
kilogram
L.S.
23.00
3.90
4.00
1.73
92.00
6.75
day
day
L.S.
0.91
0.91
83.98
487.00
368.00
1.73
443.17
334.88
145.29
1022.09
10.22
1032.31
154.85
1187.16
118.71
118.70
Extra for lining out plaster to imitate stone or concrete blocks walling.
Description
LABOUR
Mason (average)
Beldar
Solution of lime putty
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
L.S.
0.50
0.50
1.82
Rate
467.00
368.00
1.73
Amount
233.50
184.00
3.15
420.65
4.21
424.86
63.73
488.59
48.85
48.85
13.28
12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4

fine sand):
13.28.1
Flush Band
Code
Description
Unit
Quantity
3.4
Detail of cost for 10 metre long and 10 cm

wide band
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
cum
0.014
3499.70
49.00
day
day
day
0.27
0.27
0.05
467.00
368.00
407.00
126.09
99.36
20.35
0155
0115
0101
786
Rate
Amount
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 10.00 metre long and 10 cm
wide band
Cost of 1.00 metre long and 1 cm wide band
Say
L.S.
1.43
13.28.2
Code
3.4
0155
0115
0101
9999
13.28.3
Code
3.4
0155
0115
0101
9999
Rate
1.73
Amount
2.47
297.27
2.97
300.24
45.04
345.28
3.45
3.45
Sunk Band
Description
wide band
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
Sundries
TOTAL
TOTAL
wide band
Say
Unit
Quantity
Rate
Amount
cum
0.014
3499.70
49.00
day
day
day
L.S.
0.30
0.30
0.05
2.08
467.00
368.00
407.00
1.73
140.10
110.40
20.35
3.60
323.45
3.23
326.68
49.00
375.68
3.75
3.75
Raised Band
Description
wide band
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
Sundries
TOTAL
TOTAL
wide band
Say
787
Unit
Quantity
Rate
Amount
cum
0.014
3499.70
49.00
day
day
day
L.S.
0.35
0.35
0.05
2.73
467.00
368.00
407.00
1.73
163.45
128.80
20.35
4.72
366.32
3.66
369.98
55.50
425.48
4.25
4.25
13.28.4
Code
3.4
0155
0115
0101
9999
Moulded Band
Description
wide band
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
Sundries
TOTAL
TOTAL
wide band
Say
Unit
Quantity
Rate
Amount
cum
0.014
3499.70
49.00
day
day
day
L.S.
0.65
0.65
0.05
1.56
467.00
368.00
407.00
1.73
303.55
239.20
20.35
2.70
614.80
6.15
620.95
93.14
714.09
7.14
7.15
13.29
18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4

fine sand):
13.29.1
Flush Band
Code
3.4
0155
0115
0101
9999
13.29.2
Description
wide band
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
Sundries
TOTAL
TOTAL
wide band
Say
Unit
Quantity
Rate
Amount
cum
0.02
3499.70
69.99
day
day
day
L.S.
0.32
0.32
0.06
2.08
467.00
368.00
407.00
1.73
149.44
117.76
24.42
3.60
365.21
3.65
368.86
55.33
424.19
4.24
4.25
Sunk Band
Code
Description
Unit
Quantity
3.4

wide band
MATERIAL
cum
0.02
788
Rate
3499.70
Amount
69.99
Code
0155
0115
0101
9999
13.29.3
Code
3.4
0155
0115
0101
9999
13.29.4
Code
3.10
0155
0115
0101
Description
LABOUR
Mason (average)
Coolie
Bhisti
Sundries
TOTAL
TOTAL
wide band
Say
Unit
Quantity
day
day
day
L.S.
0.36
0.36
0.06
2.73
Rate
467.00
368.00
407.00
1.73
Amount
168.12
132.48
24.42
4.72
399.73
4.00
403.73
60.56
464.29
4.64
4.65
Raised Band
Description
wide band
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
Sundries
TOTAL
TOTAL
wide band
Say
Unit
Quantity
Rate
Amount
cum
0.02
3499.70
69.99
day
day
day
L.S.
0.42
0.42
0.06
4.42
467.00
368.00
407.00
1.73
196.14
154.56
24.42
7.65
452.76
4.53
457.29
68.59
525.88
5.25
5.25
Moulded Band
Description
wide band
MATERIAL
5 coarse sand)
LABOUR
Mason (average)
Coolie
Bhisti
789
Unit
Quantity
Rate
Amount
cum
0.024
3565.05
85.56
day
day
day
0.86
0.86
0.05
467.00
368.00
407.00
401.62
316.48
20.35
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
wide band
wide band
Say
L.S.
2.73
13.30
Code
3.10
3.4
0155
0115
0101
9999
Rate
1.73
Amount
4.72
828.73
8.29
837.02
125.55
962.57
9.62
9.60
18 mm thick moulded cement mortar band in two coats under layer 12 mm

thick with cement mortar 1:5 (1 cement : 5 coarse sand) top layer 6 mm thick
with cement mortar 1:4 (1 cement : 4 fine sand).
Description
wide band
MATERIAL
5 coarse sand)
SH: Mortars
LABOUR
Mason (average)
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Say
Unit
Quantity
Rate
Amount
cum
0.014
3565.05
49.91
cum
0.01
3499.70
35.00
day
day
day
L.S.
0.86
0.86
0.05
2.73
467.00
368.00
407.00
1.73
401.62
316.48
20.35
4.72
828.08
8.28
836.36
125.45
961.81
9.61
9.60
13.31
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement :
3 fine sand):
13.31.1
Flush / Ruled/ Struck or weathered pointing
Code
Description
Unit
Quantity
3.3

MATERIAL
LABOUR
Mason (average)
Coolie
cum
0.03
4252.70
127.58
day
day
0.50
0.60
467.00
368.00
233.50
220.80
0155
0115
790
Rate
Amount
Code
Description
Unit
Quantity
0101
9999
9999
Bhisti
Sundries
Scaffolding and racking out joints
including sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
day
L.S.
0.93
7.15
407.00
1.73
378.51
12.37
L.S.
14.30
1.73
24.74
997.50
9.98
1007.48
151.12
1158.60
115.86
115.85
Unit
Quantity
cum
0.046
4252.70
195.62
day
day
day
L.S.
1.07
1.31
1.00
7.15
467.00
368.00
407.00
1.73
499.69
482.08
407.00
12.37
L.S.
16.12
1.73
27.89
1624.65
16.25
1640.90
246.14
1887.04
188.70
188.70
13.31.2
Code
3.3
0155
0115
0101
9999
9999
Rate
Amount
Raised and cut pointing

Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
Sundries
Scaffolding and racking out joints including
sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
Amount
13.32
Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand):
13.32.1
Flush/ Ruled/ Struck or weathered pointing
Code
3.3
9999
0155
0115
0101
Description
MATERIAL
Sundries
LABOUR
Mason (average)
Coolie
Bhisti
791
Unit
Quantity
Rate
Amount
cum
L.S.
0.046
7.15
4252.70
1.73
195.62
12.37
day
day
day
0.67
0.80
1.28
467.00
368.00
407.00
312.89
294.40
520.96
Code
Description
9999

sundries sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
L.S.
16.12
Rate
1.73
Amount
27.89
1364.13
13.64
1377.77
206.67
1584.44
158.44
158.45
13.33
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
13.33.1
Flush/ Ruled pointing
Code
3.3
9999
0155
0115
0101
9999
13.33.2
Code
3.3
9999
0155
0115
0101
9999
Description
MATERIAL
Sundries
LABOUR
Mason (average)
Coolie
Bhisti
sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
L.S.
0.023
7.15
4252.70
1.73
97.81
12.37
day
day
day
0.92
1.37
0.93
467.00
368.00
407.00
429.64
504.16
378.51
L.S.
16.12
1.73
27.89
1450.38
14.50
1464.88
219.73
1684.61
168.46
168.45
Unit
Quantity
cum
L.S.
0.038
7.15
4252.70
1.73
161.60
12.37
day
day
day
2.00
2.96
1.00
467.00
368.00
407.00
934.00
1089.28
407.00
L.S.
16.12
1.73
27.89
2632.14
26.32
2658.46
398.77
3057.23
305.72
305.70
Raised and cut pointing

Description
MATERIAL
Sundries
LABOUR
Mason (average)
Coolie
Bhisti
sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
792
Rate
Amount
13.34
Code
3.16
9999
0155
0115
0101
9999
Raised and cut pointing on stone work in white cement mortar 1:3 (1 white
cement : 3 marble dust).
Description
MATERIAL
White Cement mortar 1:3 (1 white cement :
3 marble dust)
SH: Mortars
Sundries
LABOUR
Mason (average)
Coolie
Bhisti
sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
L.S.
0.038
7.15
7314.50
1.73
277.95
12.37
day
day
day
2.00
2.96
1.00
467.00
368.00
407.00
934.00
1089.28
407.00
L.S.
16.12
1.73
27.89
2748.49
27.48
2775.97
416.40
3192.37
319.23
319.25
13.35
Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 fine sand):
13.35.1
Flush/ Ruled pointing
Code
3.2
0155
0115
0101
9999
13.36
Description
MATERIAL
Cement mortar 1:2 (1 cement : 2 fine sand)
LABOUR
Mason (average)
Coolie
Bhisti
sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.015
5133.75
77.01
day
day
day
0.47
0.69
0.59
467.00
368.00
407.00
219.49
253.92
240.13
L.S.
16.12
1.73
27.89
818.44
8.18
826.62
123.99
950.61
95.06
95.05
Extra for pointing on walls on the outside at height more than 10 m from
ground level for every additional height of 3 m or part there of.
Code
Description
Unit
Quantity
9999

LABOUR
Scaffolding
L.S.
13.39
793
Rate
1.73
Amount
23.16
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
13.39
13.37
White washing with lime to give an even shade :
13.37.1
New work (three or more coats)
Code
0775
9977
0141
0115
9999
9999
13.38
Code
0776
9977
9999
0141
0115
9999
Description
Unit

MATERIAL
Dehradun white lime
Carriage of lime
LABOUR
White Washer
Coolie
Indigo gum etc
Sundries ladders etc
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
1.73
Rate
Amount
23.16
46.32
0.46
46.78
7.02
53.80
5.38
5.40
Amount
quintal
L.S.
0.03
0.91
550.00
1.73
16.50
1.57
day
day
L.S.
L.S.
0.20
0.10
4.42
2.73
407.00
368.00
1.73
1.73
81.40
36.80
7.65
4.72
148.64
1.49
150.13
22.52
172.65
17.26
17.25
Satna lime wash on walls with one coat.

Description
Unit

MATERIAL
Satna lime
Carriage of lime
Indigo gum etc
LABOUR
White Washer
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
794
Quantity
Rate
Amount
quintal
L.S.
L.S.
0.01
2.08
0.52
370.00
1.73
1.73
3.70
3.60
0.90
day
day
L.S.
0.08
0.04
2.73
407.00
368.00
1.73
32.56
14.72
4.72
60.20
0.60
60.80
9.12
69.92
6.99
7.00
13.39
Colour washing such as green, blue or buff to give an even shade :
13.39.1
New work (two or more coats) with a base coat of white washing with lime
Code
0775
9977
9999
0141
0115
9999
9999
13.39.2
Code
0775
9977
9999
0141
0115
9999
9999
13.40
Description
Unit

MATERIAL
Dehradun white lime
Carriage of lime
Add for colouring stuff
LABOUR
White Washer
Coolie
Indigo gum etc
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
quintal
L.S.
L.S.
0.03
8.06
0.91
550.00
1.73
1.73
16.50
13.94
1.57
day
day
L.S.
L.S.
0.30
0.10
4.42
2.73
407.00
368.00
1.73
1.73
122.10
36.80
7.65
4.72
203.28
2.03
205.31
30.80
236.11
23.61
23.60
New work (two or more coats) with a base coat of whiting

Description
Unit

MATERIAL
Dehradun white lime
Carriage of lime
Add for colouring stuff
LABOUR
White Washer
Coolie
Indigo gum etc
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
quintal
L.S.
L.S.
0.03
8.06
0.91
550.00
1.73
1.73
16.50
13.94
1.57
day
day
L.S.
L.S.
0.30
0.10
2.73
2.73
407.00
368.00
1.73
1.73
122.10
36.80
4.72
4.72
200.35
2.00
202.35
30.35
232.70
23.27
23.25
Distempering with dry distemper of approved brand and manufacture (two

or more coats) of required shade on new work, over and including water
thinnable priming coat to give an even shade.
Code
Description
Unit
Quantity
0808

MATERIAL
Water thinnable cement primer for interior
wall surface, having VOC content less than
50 gms/lit.
litre
0.70
795
Rate
56.00
Amount
39.20
Code
Description
Unit
Quantity
9999
Putty, glue etc

For distempering
Dry distemper
Carriage of material
Brushes, sand paper etc
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
2.73
1.73
4.72
kilogram
L.S.
L.S.
1.50
1.56
7.15
30.00
1.73
1.73
45.00
2.70
12.37
day
day
L.S.
0.80
0.40
5.33
448.00
368.00
1.73
358.40
147.20
9.22
618.81
6.19
625.00
93.75
718.75
71.87
71.85
0815
9977
9999
0131
0115
9999
Rate
Amount
13.41
Distempering with oil bound washable distemper of approved brand and

manufacture to give an even shade :
13.41.1
New work (two or more coats) over and including water thinnable priming
coat with cement primer
Code
0808
9999
9988
0816
9977
9999
0131
0115
9999
Description
MATERIAL
50 gms/lit.
Brushes, putty etc
Sundries including Carriage
Oil bound washable distemper/ Acrylic
distemper
Brushes, sand paper and putty for filling
holes
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
796
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
0.70
7.15
8.06
56.00
1.73
1.73
39.20
12.37
13.94
kilogram
L.S.
1.50
4.42
45.00
1.73
67.50
7.65
L.S.
11.70
1.73
20.24
day
day
L.S.
1.00
0.50
8.06
448.00
368.00
1.73
448.00
184.00
13.94
806.84
8.07
814.91
122.24
937.15
93.71
93.70
13.42
Code
0816
9977
9999
0131
0114
9999
Distempering with 1st quality acrylic distemper (ready mixed) of approved

manufacturer, of required shade and colour complete, as per manufacturer's
specification.
Description
Unit

MATERIAL
distemper
Brushes, sand paper and putty for filling
holes
LABOUR
Painter
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
kilogram
L.S.
1.50
4.42
45.00
1.73
67.50
7.65
L.S.
11.57
1.73
20.02
day
day
L.S.
0.40
0.46
8.06
448.00
368.00
1.73
179.20
169.28
13.94
457.59
4.58
462.17
69.33
531.50
53.15
53.15
13.43
Applying one coat of water thinnable cement primer of approved brand and
manufacture on wall surface :
13.43.1
Water thinnable cement primer
Code
0808
9999
0131
0115
9988
Description
MATERIAL
50 gms/lit.
Brushes, putty etc
LABOUR
Painter
Coolie
Sundries including carriage
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
797
Unit
Quantity
Rate
Amount
litre
L.S.
0.70
7.15
56.00
1.73
39.20
12.37
day
day
L.S.
0.40
0.20
8.06
448.00
368.00
1.73
179.20
73.60
13.94
318.31
3.18
321.49
48.22
369.71
36.97
36.95
13.44
Finishing walls with water proofing cement paint of required shade :
13.44.1
New work (Two or more coats applied @ 3.84 kg/10 sqm)
Code
0851
9977
0131
0115
0101
9999
9999
Description
Unit

MATERIAL
Water proofing cement paint
LABOUR
Painter
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
kilogram
L.S.
3.84
1.56
38.00
1.73
145.92
2.70
day
day
day
L.S.
L.S.
0.46
0.23
0.10
7.15
8.06
448.00
368.00
407.00
1.73
1.73
206.08
84.64
40.70
12.37
13.94
506.35
5.06
511.41
76.71
588.12
58.81
58.80
13.45
Finishing walls with textured exterior paint of required shade :
13.45.1
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including
priming coat of exterior primer applied @ 2.20kg/10 sqm
Code
8507
0809
9977
0131
0115
0101
9999
9999
Description
Unit

MATERIAL
Textured exterior paint
Exterior primer
LABOUR
Painter
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
798
Quantity
Rate
Amount
litre
kilogram
L.S.
3.28
2.20
1.56
230.00
52.00
1.73
754.40
114.40
2.70
day
day
day
L.S.
L.S.
0.60
0.30
0.05
7.02
8.06
448.00
368.00
407.00
1.73
1.73
268.80
110.40
20.35
12.14
13.94
1297.13
12.97
1310.10
196.52
1506.62
150.66
150.65
13.46
Finishing walls with Acrylic Smooth exterior paint of required shade :
13.46.1
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including
priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Code
8505
0809
9977
0131
0115
0101
9999
9999
Description
MATERIAL
Acrylic exterior paint
Exterior Primer
LABOUR
Painter
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
Kg
L.S.
1.67
2.20
1.56
170.00
52.00
1.73
283.90
114.40
2.70
day
day
day
L.S.
L.S.
0.60
0.30
0.05
7.15
8.06
448.00
368.00
407.00
1.73
1.73
268.80
110.40
20.35
12.37
13.94
826.86
8.27
835.13
125.27
960.40
96.04
96.05
13.47
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone
additives of required shade:
13.47.1
New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including
priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Code
8506
0809
9977
0131
0115
0101
9999
9999
Description
Unit

MATERIAL
Premium Acrylic exterior paint
Exterior primer
LABOUR
Painter
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
799
Quantity
Rate
Amount
litre
kilogram
L.S.
1.43
2.20
1.56
203.00
52.00
1.73
290.29
114.40
2.70
day
day
day
L.S.
L.S.
0.60
0.30
0.05
7.15
8.06
448.00
368.00
407.00
1.73
1.73
268.80
110.40
20.35
12.37
13.94
833.25
8.33
841.58
126.24
967.82
96.78
96.80
13.48
Finishing with Deluxe Multi surface paint system for interiors and exteriors
using Primer as per manufacturers specifications :
13.48.1
Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including
one coat of Special primer applied @ 0.75 ltr /10 sqm
Code
8504
8509
9977
0131
0115
0101
9999
9999
13.48.2
Code
8504
8509
9977
0131
0115
0101
9999
9999
Description
MATERIAL
Multi surface paint
Special Primer (C.W.)
LABOUR
Painter
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
litre
L.S.
1.25
0.75
1.56
255.00
140.00
1.73
318.75
105.00
2.70
day
day
day
L.S.
L.S.
0.60
0.30
0.05
7.02
8.06
448.00
368.00
407.00
1.73
1.73
268.80
110.40
20.35
12.14
13.94
852.08
8.52
860.60
129.09
989.69
98.96
98.95
Painting wood work with Deluxe Multi Surface Paint of required shade. Two
or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied
@0.75 ltr/10 sqm of approved brand and manufacture
Description
MATERIAL
Multi surface paint
Special Primer (C.W.)
LABOUR
Painter
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
800
Unit
Quantity
Rate
Amount
litre
litre
L.S.
0.90
0.75
1.56
255.00
140.00
1.73
229.50
105.00
2.70
day
day
day
L.S.
L.S.
0.60
0.30
0.05
7.02
8.06
448.00
368.00
407.00
1.73
1.73
268.80
110.40
20.35
12.14
13.94
762.83
7.63
770.46
115.57
886.03
88.60
88.60
13.48.3
Code
8504
8510
9977
0131
0115
0101
9999
9999
Painting Steel work with Deluxe Multi Surface Paint to give an even shade.
Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer
applied @ 0.80 ltr/10 sqm of approved brand and manufacture
Description
MATERIAL
Multi surface paint
Metal Primer (U.G.)
LABOUR
Painter
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
litre
L.S.
0.90
0.80
1.56
255.00
90.00
1.73
229.50
72.00
2.70
day
day
day
L.S.
L.S.
0.60
0.30
0.05
7.02
8.06
448.00
368.00
407.00
1.73
1.73
268.80
110.40
20.35
12.14
13.94
729.83
7.30
737.13
110.57
847.70
84.77
84.75
13.50
Applying priming coat:
13.50.1
With ready mixed pink or Grey primer of approved brand and manufacture
on wood work (hard and soft wood)
Code
0823
9999
9977
0131
0115
9999
9999
Description
MATERIAL
Pink primer (for wood)
Putty
Carriage
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
801
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
0.75
2.73
0.39
85.00
1.73
1.73
63.75
4.72
0.67
day
day
L.S.
L.S.
0.25
0.25
5.33
10.79
448.00
368.00
1.73
1.73
112.00
92.00
9.22
18.67
301.03
3.01
304.04
45.61
349.65
34.96
34.95
13.50.2
Code
4201
9999
9977
0131
0115
9999
9999
13.50.3
Code
4202
9977
0131
0115
9999
13.50.4
Code
4202
9977
0131
0115
With ready mixed aluminium primer of approved brand and manufacture on

resinous wood and plywood
Description
MATERIAL
Aluminium primer
Putty
Carriage
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
0.75
2.73
0.39
88.00
1.73
1.73
66.00
4.72
0.67
day
day
L.S.
L.S.
0.25
0.25
5.33
10.79
448.00
368.00
1.73
1.73
112.00
92.00
9.22
18.67
303.28
3.03
306.31
45.95
352.26
35.22
35.20
With ready mixed red oxide zinc chromate primer of approved brand and
manufacture on steel galvanised iron/ steel works
Description
MATERIAL
Red oxide Zinc chromate primer
Carriage
LABOUR
Painter
Coolie
Brushes,sand paper including sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.54
0.52
65.00
1.73
35.10
0.90
day
day
L.S.
0.24
0.24
10.79
448.00
368.00
1.73
107.52
88.32
18.67
250.51
2.51
253.02
37.95
290.97
29.09
29.10
With ready mixed red oxide zinc chromate primer of approved brand and
manufacture on steel work (second coat)
Description
MATERIAL
Carriage
LABOUR
Painter
Coolie
802
Unit
Quantity
Rate
Amount
litre
L.S.
0.36
0.39
65.00
1.73
23.40
0.67
day
day
0.12
0.12
448.00
368.00
53.76
44.16
Code
Description
Unit
Quantity
9999
Brushes,sand paper including

TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
7.15
Rate
1.73
Amount
12.37
134.36
1.34
135.70
20.36
156.06
15.60
15.60
13.51
Painting with silicon & acrylic emulsion based water thinnable sealer of approved
brand and manufacture on wet or patchy portion of plastered surfaces :
13.51.1
One coat
Code
0801
9977
9999
0131
0115
9999
9999
13.51.2
Code
0801
9977
9999
0131
0115
9999
9999
Description
MATERIAL
Silicon and acrylic emulsion
Putty etc
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
1.80
0.52
2.73
130.00
1.73
1.73
234.00
0.90
4.72
day
day
L.S.
L.S.
0.27
0.27
5.33
10.79
448.00
368.00
1.73
1.73
120.96
99.36
9.22
18.67
487.83
4.88
492.71
73.91
566.62
56.66
56.65
Unit
Quantity
litre
L.S.
L.S.
2.88
0.52
2.73
130.00
1.73
1.73
374.40
0.90
4.72
day
day
L.S.
L.S.
0.43
0.43
8.53
17.26
448.00
368.00
1.73
1.73
192.64
158.24
14.76
29.86
775.52
7.76
783.28
117.49
900.77
90.07
90.05
Two coats
Description
MATERIAL
Silicon and acrylic emulsion
Putty etc
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
803
Rate
Amount
13.52
Finishing with Epoxy paint (two or more coats) at all locations prepared and
applied as per manufacturer's specifications including appropriate priming
coat, preparation of surface, etc. complete.
13.52.1
On steel work
Code
4202
9999
9977
0131
0115
9999
9999
7239
9977
0131
0115
9999
9999
13.52.2
Code
0821
9999
9977
0131
0115
9999
9999
7239
9999
9977
Description
PRIMING COAT
MATERIAL
Putty
Carriage
LABOUR
Painter
Coolie
Sundries
EPOXY PAINTING
MATERIAL
Epoxy paint
LABOUR
Painter
Coolie
Putty, brushes, sand paper etc
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
0.75
2.73
0.39
65.00
1.73
1.73
48.75
4.72
0.67
day
day
L.S.
L.S.
0.25
0.25
5.46
10.66
448.00
368.00
1.73
1.73
112.00
92.00
9.45
18.44
litre
L.S.
1.25
1.43
240.00
1.73
300.00
2.47
day
day
L.S.
L.S.
0.54
0.54
6.76
8.06
448.00
368.00
1.73
1.73
241.92
198.72
11.69
13.94
1054.77
10.55
1065.32
159.80
1225.12
122.51
122.50
Unit
Quantity
litre
L.S.
L.S.
0.84
13.52
0.52
59.00
1.73
1.73
49.56
23.39
0.90
day
day
L.S.
L.S.
0.25
0.25
2.73
8.06
448.00
368.00
1.73
1.73
112.00
92.00
4.72
13.94
litre
L.S.
L.S.
1.21
6.76
1.43
240.00
1.73
1.73
290.40
11.69
2.47
On concrete work
Description
PRIMING COAT
MATERIAL
Distemper primer
Putty
Carriage
LABOUR
Painter
Coolie
Sundries
EPOXY PAINTING
MATERIAL
Epoxy paint
Materials for filling in holes and cracks
804
Rate
Amount
Code
0131
0115
9999
9999
Description
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
L.S.
L.S.
0.54
0.54
10.79
6.76
Rate
448.00
368.00
1.73
1.73
Amount
241.92
198.72
18.67
11.69
1072.07
10.72
1082.79
162.42
1245.21
124.52
124.50
13.53
Painting on G.S. sheet with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :
13.53.1
New work (two or more coats) including a coat of approved steel primer but
excluding a coat of mordant solution
Code
4202
9977
0131
0114
9999
0834
9977
0131
0115
9999
9999
Description
PRIMING COAT
MATERIAL
Carriage
LABOUR
Painter
Beldar
EPOXY PAINTING
MATERIAL
Synthetic enamel paint in all shades except
black or chocolate shade
Carriage
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
805
Unit
Quantity
Rate
Amount
litre
L.S.
0.36
0.39
65.00
1.73
23.40
0.67
day
day
L.S.
0.12
0.12
7.15
448.00
368.00
1.73
53.76
44.16
12.37
litre
L.S.
0.80
1.43
150.00
1.73
120.00
2.47
day
day
L.S.
L.S.
0.54
0.54
6.76
8.06
448.00
368.00
1.73
1.73
241.92
198.72
11.69
13.94
723.10
7.23
730.33
109.55
839.88
83.98
84.00
13.54
Applying a coat of mordant solution on G.S. sheet:
13.54.1
With a solution of 38 gms of copper acetate in a litre of soft water
Code
4203
9999
9977
0131
0115
9999
9999
13.54.2
Code
4204
4205
4206
4207
9999
9977
0131
0115
9999
9999
Description
Unit

MATERIAL
Copper acetate
Soft Water
Carriage
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 25 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
kilogram
L.S.
L.S.
0.038
1.82
0.91
300.00
1.73
1.73
11.40
3.15
1.57
day
day
L.S.
L.S.
0.60
0.60
35.88
35.88
448.00
368.00
1.73
1.73
268.80
220.80
62.07
62.07
629.86
6.30
636.16
95.42
731.58
29.26
29.25
With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms

each of copper chloride, copper nitrate and ammonium chloride dissolved
in a litre of soft water
Description
Unit

MATERIAL
Hydrochloric acid
Copper chloride
Copper nitrate
Ammonium chloride
Soft Water
Carriage
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 25 sqm
Cost of 1.00 sqm
Say
806
Quantity
Rate
Amount
kilogram
kilogram
kilogram
kilogram
L.S.
L.S.
0.013
0.013
0.013
0.013
1.82
0.91
35.00
280.00
220.00
20.00
1.73
1.73
0.46
3.64
2.86
0.26
3.15
1.57
day
day
L.S.
L.S.
0.60
0.60
35.88
35.88
448.00
368.00
1.73
1.73
268.80
220.80
62.07
62.07
625.68
6.26
631.94
94.79
726.73
29.06
29.05
13.55
Painting (two or more coats) on rain water, soil, waste and vent pipes and
fittings with black anticorrosive bitumastic paint of approved brand and
manufacture, over and including a priming of ready mixed zinc chromate
yellow primer on new work:
13.55.1
100 mm diameter pipes
Code
4202
9977
0131
0115
9999
0828
9977
0131
0115
9999
9999
9999
9999
13.55.2
Code
4202
0131
0115
9999
9977
0828
9977
0131
0115
9999
9999
Description
Detail of cost for 30 mtrs
Area=22/7 x106.4mm x30m =10.032sqm
MATERIAL
Carriage
LABOUR
Painter
Coolie
MATERIAL
Anticorrosive bituminous paint (black)
Carriage
LABOUR
Painter
Coolie
Putty, sand paper etc
Sundries
Wire brushes for cleaning
Extra for delays
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.54
0.52
65.00
1.73
35.10
0.90
day
day
L.S.
0.24
0.24
10.79
448.00
368.00
1.73
107.52
88.32
18.67
litre
L.S.
0.95
1.43
100.00
1.73
95.00
2.47
day
day
L.S.
L.S.
L.S.
L.S.
0.54
0.54
5.33
8.06
5.33
61.10
448.00
368.00
1.73
1.73
1.73
1.73
241.92
198.72
9.22
13.94
9.22
105.70
926.70
9.27
935.97
140.40
1076.37
35.87
35.85
Unit
Quantity
litre
0.80
65.00
52.00
day
day
L.S.
L.S.
0.36
0.36
15.99
0.91
448.00
368.00
1.73
1.73
161.28
132.48
27.66
1.57
litre
L.S.
1.41
2.08
100.00
1.73
141.00
3.60
day
day
L.S.
L.S.
0.80
0.80
8.06
11.96
448.00
368.00
1.73
1.73
358.40
294.40
13.94
20.69

Description
Area=22/7 x0.1572 m x30m =14.82sqm
MATERIAL
LABOUR
Painter
Coolie
Carriage
MATERIAL
Carriage
LABOUR
Painter
Coolie
Sundries
807
Rate
Amount
Code
Description
Unit
Quantity
9999
9999

Extra for delays
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
L.S.
L.S.
7.15
94.12
Rate
1.73
1.73
Amount
12.37
162.83
1382.22
13.82
1396.04
209.41
1605.45
53.51
53.50
13.56
Painting (two or more coats) on rain water, soil, waste and vent pipes and
fittings with synthetic enamel paint of approved brand and manufacture and
required colour over a priming coat of approved steel primer on new work.
13.56.1
Code
4202
9977
0131
0115
9999
0833
9977
9999
0131
0115
9999
9999
9999
13.56.2
Description
Area=22/7x0.1064m x30m =10.032sqm
MATERIAL
Carriage
LABOUR
Painter
Coolie
Sundries
MATERIAL
Synthetic enamel paint in black or
chocolate shade
Carriage
LABOUR
Painter
Coolie
Sundries
Extra for delays
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.54
0.52
65.00
1.73
35.10
0.90
day
day
L.S.
0.24
0.24
10.79
448.00
368.00
1.73
107.52
88.32
18.67
litre
L.S.
L.S.
1.16
1.43
5.33
170.00
1.73
1.73
197.20
2.47
9.22
day
day
L.S.
L.S.
L.S.
0.54
0.54
6.76
11.96
66.43
448.00
368.00
1.73
1.73
1.73
241.92
198.72
11.69
20.69
114.92
1047.34
10.47
1057.81
158.67
1216.48
40.54
40.55
Code
Description
Unit
Quantity
4202

Area=22/7 x157.2mm x30m =14.82sqm
MATERIAL
litre
0.80
808
Rate
65.00
Amount
52.00
Code
Description
Unit
Quantity
9977
Carriage
LABOUR
Painter
Coolie
Sundries
MATERIAL
chocolate shade
Carriage
LABOUR
Painter
Coolie
Sundries
Extra for delays
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
L.S.
0.65
1.73
1.12
day
day
L.S.
0.36
0.36
15.99
448.00
368.00
1.73
161.28
132.48
27.66
litre
L.S.
L.S.
1.72
2.08
7.93
170.00
1.73
1.73
292.40
3.60
13.72
day
day
L.S.
L.S.
L.S.
0.80
0.80
10.01
17.81
101.40
448.00
368.00
1.73
1.73
1.73
358.40
294.40
17.32
30.81
175.42
1560.61
15.61
1576.22
236.43
1812.65
60.42
60.40
0131
0115
9999
0833
9977
9999
0131
0115
9999
9999
9999
Rate
Amount
13.57
Painting with oil type wood preservative of approved brand and

manufacture :
13.57.1
New work (two or more coats)
Code
0859
9977
0131
0115
9999
9999
Description
MATERIAL
Oil type wood preservative
LABOUR
Painter
Coolie
Brushes etc
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
809
Unit
Quantity
Rate
Amount
litre
L.S.
1.00
0.52
140.00
1.73
140.00
0.90
day
day
L.S.
L.S.
0.15
0.15
4.16
3.90
448.00
368.00
1.73
1.73
67.20
55.20
7.20
6.75
277.25
2.77
280.02
42.00
322.02
32.20
32.20
13.58
Code
7240
9977
0131
0114
9999
9999
13.59
Code
9999
0324
9977
0771
0114
9999
9999
Providing and applying two coats of fire retardant paint on cleaned wood / ply
surface @ 3.5 sqm per litre per coat including preparation of base surface as
per recommendations of manufacturer to make the surface fire retardant.
Description
MATERIAL
Fire retardant paint
LABOUR
Painter
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
5.70
1.43
269.00
1.73
1533.30
2.47
day
day
L.S.
L.S.
0.54
0.54
6.76
8.06
448.00
368.00
1.73
1.73
241.92
198.72
11.69
13.94
2002.04
20.02
2022.06
303.31
2325.37
232.53
232.55
Coal tarring two coats on new work using 0.16 Litre and 0.12 litre coal tar per
sqm in the first coat and second coat respectively.
Description
MATERIAL
Lime
Coal Tar
Kerosene oil
LABOUR
Beldar
Brushes etc
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
L.S.
litre
L.S.
litre
1.43
2.80
1.43
0.50
1.73
30.00
1.73
45.00
2.47
84.00
2.47
22.50
day
L.S.
L.S.
0.43
5.33
5.33
368.00
1.73
1.73
158.24
9.22
9.22
288.12
2.88
291.00
43.65
334.65
33.46
33.45
13.60
Wall painting with acrylic emulsion paint of approved brand and manufacture
to give an even shade :
13.60.1
Two or more coats on new work
Code
Description
Unit
Quantity
0835

MATERIAL
Plastic emulsion paint
litre
1.21
810
Rate
200.00
Amount
242.00
Code
Description
Unit
Quantity
9999
9977
MATERIAL
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
L.S.
6.76
1.43
1.73
1.73
11.69
2.47
day
day
L.S.
L.S.
0.54
0.54
10.79
6.76
448.00
368.00
1.73
1.73
241.92
198.72
18.67
11.69
727.16
7.27
734.43
110.16
844.59
84.45
84.45
0131
0115
9999
9999
Rate
Amount
13.61
Painting with synthetic enamel paint of approved brand and manufacture to

give an even shade :
13.61.1
Code
0833
9999
9977
0131
0115
9999
9999
Description
MATERIAL
chocolate shade
MATERIAL
Carriage
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
1.16
5.33
1.43
170.00
1.73
1.73
197.20
9.22
2.47
day
day
L.S.
L.S.
0.54
0.54
6.76
8.06
448.00
368.00
1.73
1.73
241.92
198.72
11.69
13.94
675.16
6.75
681.91
102.29
784.20
78.42
78.40
13.62
Painting with synthetic enamel paint of approved brand and manufacture of

required colour to give an even shade :
13.62.1
Two or more coats on new work over an under coat of suitable shade with
ordinary paint of approved brand and manufacture
Code
Description
Unit
Quantity
0823
9999
9977

MATERIAL
Pink primer (for wood)
Putty
Carriage
litre
L.S.
L.S.
0.75
2.73
0.39
811
Rate
85.00
1.73
1.73
Amount
63.75
4.72
0.67
Code
0131
0115
9999
9999
0833
9977
0131
0115
9999
9999
Description
LABOUR
Painter
Coolie
Sundries
MATERIAL
chocolate shade
Carriage of paint and material
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
day
day
L.S.
L.S.
0.25
0.25
5.33
10.79
448.00
368.00
1.73
1.73
112.00
92.00
9.22
18.67
litre
L.S.
1.16
1.43
170.00
1.73
197.20
2.47
day
day
L.S.
L.S.
0.54
0.54
6.76
8.06
448.00
368.00
1.73
1.73
241.92
198.72
11.69
13.94
966.97
9.67
976.64
146.50
1123.14
112.31
112.30
13.63
Painting with aluminium paint of approved brand and manufacture to give an

even shade .
13.63.1
Code
0826
9977
9999
0131
0115
9999
9999
Description
MATERIAL
Aluminium paint
Putty etc
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
812
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
0.80
1.43
5.33
130.00
1.73
1.73
104.00
2.47
9.22
day
day
L.S.
L.S.
0.54
0.54
6.76
11.96
448.00
368.00
1.73
1.73
241.92
198.72
11.69
20.69
588.71
5.89
594.60
89.19
683.79
68.37
68.35
13.64
Painting with acid proof paint of approved brand and manufacture of required
colour to give an even shade :
13.64.1
Code
0827
9977
9999
0131
0115
9999
9999
Description
MATERIAL
Acid proof paint (chocolate or black)
Carriage of paint
Putty etc
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
1.16
1.43
5.33
225.00
1.73
1.73
261.00
2.47
9.22
day
day
L.S.
L.S.
0.54
0.54
6.76
8.06
448.00
368.00
1.73
1.73
241.92
198.72
11.69
13.94
738.96
7.39
746.35
111.95
858.30
85.83
85.85
13.65
Painting with black anti-corrosive bitumastic paint of approved brand and

manufacture to give an even shade :
13.65.1
Code
0828
9977
0131
0115
9999
9999
Description
MATERIAL
Carriage
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
813
Unit
Quantity
Rate
Amount
litre
L.S.
0.95
1.43
100.00
1.73
95.00
2.47
day
day
L.S.
L.S.
0.54
0.54
5.33
8.06
448.00
368.00
1.73
1.73
241.92
198.72
9.22
13.94
561.27
5.61
566.88
85.03
651.91
65.19
65.20
13.66
Floor painting with floor enamel paint of approved brand and manufacture of
required colour to give an even shade :
13.66.1
Code
0831
9977
9999
0131
0115
9999
9999
Description
MATERIAL
Floor enamel paint in all shades except green
Carriage
Putty etc
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
1.48
1.43
5.33
122.00
1.73
1.73
180.56
2.47
9.22
day
day
L.S.
L.S.
0.54
0.54
6.76
8.06
448.00
368.00
1.73
1.73
241.92
198.72
11.69
13.94
658.52
6.59
665.11
99.77
764.88
76.48
76.50
13.67
Varnishing with varnish of approved brand and manufacture :
13.67.1
Two or more coats of glue sizing with copal varnish over an under coat of flatting
varnish
Code
0856
0763
0857
9977
9999
0131
0115
9999
9999
Description
Unit

MATERIAL
Ordinary varnish
Glue
Superior copal varnish
Carriage
Putty for repair to holes etc
LABOUR
Painter
(0.36+0.54=0.90)
Coolie
(0.36+0.54=0.90)
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
814
Quantity
Rate
Amount
litre
kilogram
litre
L.S.
L.S.
0.70
0.07
1.16
1.43
5.33
90.00
70.00
130.00
1.73
1.73
63.00
4.90
150.80
2.47
9.22
day
0.90
448.00
403.20
day
0.90
368.00
331.20
L.S.
L.S.
6.76
7.15
1.73
1.73
11.69
12.37
988.85
9.89
998.74
149.81
1148.55
114.85
114.85
13.67.2
Code
0856
0763
0858
9977
9999
0131
0115
9999
9999
Two or more coats glue sizing with spar varnish or an under coat of flatting
varnish
Description
Unit

MATERIAL
Ordinary varnish
Glue
Superior spar varnish
Carriage
Repair etc
LABOUR
Painter
(0.36+0.54=0.90)
Coolie
(0.36+0.54=0.90)
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
litre
kilogram
litre
L.S.
L.S.
0.70
0.07
1.26
1.43
2.73
90.00
70.00
130.00
1.73
1.73
63.00
4.90
163.80
2.47
4.72
day
0.90
448.00
403.20
day
0.90
368.00
331.20
L.S.
L.S.
6.76
7.15
1.73
1.73
11.69
12.37
997.35
9.97
1007.32
151.10
1158.42
115.84
115.85
13.68
French spirit polishing :
13.68.1
Two or more coats on new works including a coat of wood filler
Code
1000
9999
0999
9977
9999
9999
9999
0131
9999
Description
Unit

MATERIAL
Spirit
Pigment
Shellac
White woolen cloth, putty
Sand paper cotton etc
Lineseed oil
LABOUR
Painter
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
815
Amount
Quantity
Rate
Amount
litre
L.S.
kilogram
L.S.
L.S.
L.S.
L.S.
1.63
7.15
0.24
2.73
16.12
13.39
1.43
50.00
1.73
300.00
1.73
1.73
1.73
1.73
81.50
12.37
72.00
4.72
27.89
23.16
2.47
day
L.S.
3.50
8.06
448.00
1.73
1568.00
13.94
1806.05
18.06
1824.11
273.62
2097.73
209.77
209.75
13.69
Polishing on wood work with ready mixed wax polish of approved brand and
manufacture :
13.69.1
New work
Code
0855
9977
0131
0115
9999
9999
13.70
Code
0855
0131
0115
9999
9988
13.71
Code
0829
9977
0131
0115
9999
Description
Unit

MATERIAL
Wax polish (ready made)
Carriage
LABOUR
Painter
Coolie
Soap, brushes, cloth etc
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
kilogram
L.S.
0.50
0.39
250.00
1.73
125.00
0.67
day
day
L.S.
L.S.
0.80
0.80
4.16
7.15
448.00
368.00
1.73
1.73
358.40
294.40
7.20
12.37
798.04
7.98
806.02
120.90
926.92
92.69
92.70
Floor polishing on masonry or concrete floors with wax polish of approved

brand and manufacture.
Description
Unit

MATERIAL
LABOUR
Painter
Coolie
Acetic acid soap, cloth etc
Sundries including Carriage
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
kilogram
0.10
250.00
25.00
day
day
L.S.
L.S.
0.40
0.40
5.33
8.06
448.00
368.00
1.73
1.73
179.20
147.20
9.22
13.94
374.56
3.75
378.31
56.75
435.06
43.50
43.50
Lettering with black Japan paint of approved brand and manufacture

Description
Detail of cost for 100 letters of 15 cm height
MATERIAL
Black Japan paint
Carriage
LABOUR
Painter
Coolie
Painting brushes, turpentine, stencil etc
816
Unit
Quantity
Rate
Amount
litre
L.S.
0.56
0.91
90.00
1.73
50.40
1.57
day
day
L.S.
6.00
2.00
13.39
448.00
368.00
1.73
2688.00
736.00
23.16
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 100 letters of 15 cm height
Say
L.S.
8.06
13.72
Code
3.9
0155
0114
0101
9999
0367
2209
0114
2911
2202
0982
2203
0367
2209
0114
0101
Rate
1.73
Amount
13.94
3513.07
35.13
3548.20
532.23
4080.43
2.72
2.70
Washed stone grit plaster on exterior walls height upto 10 metre above ground
level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse
sand ), furrowing the under layer with scratching tool, applying cement slurry
on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement
plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal
size), in panels with groove all around as per approved pattern, including
scrubbing and washing the top layer with brushes and water to expose the
stone chippings ,complete as per specification and direction of Engineer-incharge (payment for providing grooves shall be made separately).
Description
MATERIAL
Under layer 12 mm cement plaster with
Cement mortar 1 : 4 (1 cement : 4 coarse
sand)
LABOUR
Mason (average)
Beldar
Bhisti
Scaffolding
Applying cement slurry
Carriage of Cement
Beldar
Top layer 15 mm thick stone chipping plaster
Quantity required = 0.172 cum including
wastage
Preparation of cement concrete mix 1:1/2:2
(1 cement : 1/2 coarse sand :
2 stone chipping
10 mm nominal size)
Stone chippings/ screenings 10/ 11.2 mm
nominal size
Carriage of Stone aggregate below 40 mm
nominal size
Coarse sand (zone III)
Carriage of Coarse sand
Carriage of Cement
Beldar
Bhisti
817
Unit
Quantity
Rate
Amount
cum
0.144
3970.50
571.75
day
day
day
L.S.
0.67
0.75
0.92
8.97
467.00
368.00
407.00
1.73
312.89
276.00
374.44
15.52
tonne
tonne
day
0.02
0.02
0.25
5700.00
92.24
368.00
114.00
1.84
92.00
cum
0.14
1200.00
168.00
cum
cum
cum
tonne
tonne
day
day
0.14
0.04
0.04
0.10
0.10
0.10
0.05
103.77
1200.00
103.77
5700.00
92.24
368.00
407.00
14.53
48.00
4.15
570.00
9.22
36.80
20.35
Code
Description
Unit
Quantity
9999
9999
Hire and running charges of mechanical mixer

Sundries
LABOUR
Beldar
Bhisti
Scaffolding
Labour for washing
Coolie
Sundries soft brushes etc
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
L.S.
4.29
2.08
1.73
1.73
7.42
3.60
Day
Day
Day
L.S.
1.75
1.75
0.30
24.44
487.00
368.00
407.00
1.73
852.25
644.00
122.10
42.28
Day
Day
L.S.
1.00
0.50
25.22
487.00
368.00
1.73
487.00
184.00
43.63
5015.77
50.16
5065.93
759.89
5825.82
582.58
582.60
0123
0114
0101
9999
0123
0115
9999
Rate
Amount
13.73
Forming groove of uniform size in the top layer of washed stone grit plaster as
per approved pattern using wooden battens, nailed to the under layer, including
removal of wooden battens, repair to the edges of panels and finishing the
groove complete as per specifications and direction of the Engineer-in-charge :
13.73.1
15 mm wide and 15 mm deep groove
Code
1198
9977
0112
0114
9999
0123
0114
9999
Description
Unit

Second class kail wood in plank
30 x0.015 x0.015m =6.75cudm
Wastage @ 10% = 0.68
Total = 7.43 cudm
Assuming that the battens shall become
unserviceable after using 5 times
Cost for using once = 7.43 / 5 = 1.48 cudm
MATERIAL
Second class kail wood in planks
Carriage of wood
Labour for making battens
Carpenter 2nd class
Beldar
Sundries
Labour for nailing the battens to under layer
and finishing and repairing grooves
Beldar
Nails and cement mortar
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
818
Quantity
Rate
Amount
10 cudm
L.S.
1.48
0.39
260.00
1.73
38.48
0.67
day
day
L.S.
0.15
0.15
2.86
448.00
368.00
1.73
67.20
55.20
4.95
day
day
L.S.
0.70
0.70
71.76
487.00
368.00
1.73
340.90
257.60
124.14
889.14
8.89
898.03
134.70
1032.73
34.42
34.40
13.73.2
Code
1198
9977
0112
0114
9999
0123
0114
9999
13.74
Code
9999
0123
0114
0101
9999
20 mm wide and 15 mm deep groove

Description
Unit

Second class kail wood in plank
30 x0.02 x0.015m =9.00 cudm
Wastage @ 10% = 0.90
Total = 9.90 cudm
Assuming that the battens shall become
unserviceable after using 5 times
Cost for using once = 9.9 / 5 = 1.98 cudm
MATERIAL
Second class kail wood in planks
Carriage of wood
Labour for making battens
Carpenter 2nd class
Beldar
Sundries
Labour for nailing the battens to under layer
and finishing and repairing grooves
Beldar
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
Quantity
Rate
Amount
10 cudm
L.S.
1.98
0.52
260.00
1.73
51.48
0.90
day
day
L.S.
0.15
0.15
2.86
448.00
368.00
1.73
67.20
55.20
4.95
day
day
L.S.
0.70
0.70
71.76
487.00
368.00
1.73
340.90
257.60
124.14
902.37
9.02
911.39
136.71
1048.10
34.93
34.95
Extra for washed grit plaster on exterior walls of height more than 10 m from
ground level for every additional height of 3 m or part thereof.
Description
MATERIAL
Scaffolding
Beldar
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
819
Unit
Quantity
L.S.
day
day
day
L.S.
215.28
0.30
0.30
0.15
28.60
Rate
1.73
487.00
368.00
407.00
1.73
Amount
372.43
146.10
110.40
61.05
49.48
739.46
7.39
746.85
112.03
858.88
85.88
85.90
13.75
Code
0123
0114
9999
13.76
Code
7306
9977
0117
0114
9999
9999
13.77
Code
0368
Extra for washed stone grit plaster on circular work not exceeding 6 m in radius
(in two coats).
Description
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
L.S.
0.50
0.50
53.82
Rate
487.00
368.00
1.73
Amount
243.50
184.00
93.11
520.61
5.21
525.82
78.87
604.69
60.46
60.45
Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer
of washed stone grit plastered surface as per approved pattern, including providing
and fixing aluminum channels of appropriate size and thickness (not less than 2
mm), nailed to the under layer with rust proof screws and nails and finishing the
groove complete as per specifications and direction of the Engineer-in-Charge.
Description
Unit

Aluminium channel section 15 x 15 x 2 mm
(weight 0.221 kg/mtr)
Qty = 30 + 5% wastage = 31.5 m @ 0.221
kg/m = 6.96 kg.
Aluminium T or L sections
Carriage of timber
Labour for fixing
Assistant Fitter or 2nd class Fitter
Beldar
Sundries
TOTAL
TOTAL
Cost of 30.00 mtrs
Cost of 1.00 metre
Say
Quantity
Rate
Amount
kilogram
L.S.
6.96
38.98
200.00
1.73
1392.00
67.44
day
day
L.S.
L.S.
0.46
0.15
2.86
71.76
448.00
368.00
1.73
1.73
206.08
55.20
4.95
124.14
1849.81
18.50
1868.31
280.25
2148.56
71.61
71.60
Extra for using white cement in place of ordinary cement in the top layer of the
item of washed stone grit plaster.
Description
MATERIAL
Add for
White Cement
Deduct for ordinary cement
820
Unit
Quantity
tonne
0.10
Rate
11200.00
Amount
1120.00
Code
Description
0367

TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
13.78
Code
0868
0155
0115
9999
13.79
Code
8733
Unit
Quantity
tonne
-0.10
Rate
5700.00
Amount
-570.00
550.00
5.50
555.50
83.33
638.83
63.88
63.90
Providing and applying 12 mm thick (average) premixed formulated one coat

gypsum lightweight plaster having additives and light weight aggregates as
vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied
on hacked / uneven background such as bare brick/ block/ RCC work on walls &
ceiling at all floors and locations, finished in smooth line and level etc. complete.
Description
Unit

MATERIAL
Premixed super white gypsum plaster @
16.14kg /sqm = 61.40 + 5% wastage
= 161.40+8.07= 169.47 kg
Premixed super white gypsum plaster.
LABOUR
Mason (average)
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
kg
169.47
5.00
847.35
day
day
L.S.
1.20
1.20
12.61
467.00
368.00
1.73
560.40
441.60
21.82
1871.17
18.71
1889.88
283.48
2173.36
217.33
217.35
Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective
diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/
mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs.
cement used in cement mortar as per directions of Engineer-in-Charge.
Description
Unit
Detail of cost for per bag of 50 kg of

cement used in mortar
MATERIAL
Synthetic ployster triangular fibre of length
6 mm, effective diameter 10-40 microns
and specific gravity of 1.34 to 1.40
including labour for mixing
TOTAL
TOTAL
Cost per bag of cement
Say
821
kg
Quantity
0.125
Rate
400.00
Amount
50.00
50.00
0.50
50.50
7.58
58.08
58.10
13.80
Code
0824
9977
0122
0114
9999
Providing and applying white cement based putty of average thickness 1 mm,
of approved brand and manufacturer, over the plastered wall surface to prepare
the surface even and smooth complete.
Description
Unit

MATERIAL
Cement base wall care putty
10x0.001x1429 = 14.29kg
Add 2% wastage= 0.29kg
Total = 14.58kg Say 14.58 kg
Carriage
LABOUR
Mason (for plaster of paris work) 1st class
Beldar
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
kg
14.58
20.00
291.60
L.S.
3.90
1.73
6.75
day
day
L.S.
0.45
0.45
40.00
487.00
368.00
1.73
219.15
165.60
69.20
752.30
7.52
759.82
113.97
873.79
87.37
87.35
13.81
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre, of approved brand and
manufacture, including applying additional coats wherever required, to achieve
even shade and colour.
13.81.1
One coat
Code
0802
9999
9988
0131
0115
9999
Description
MATERIAL
Acrylic distemper 1st quality , having
VOC content less than 50 gm/kg
Brushes, putty etc.
LABOUR
Painter
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
822
Unit
Quantity
Rate
Amount
Kg
L.S.
L.S.
0.62
0.52
10.79
38.00
1.73
1.73
23.56
0.90
18.67
day
day
L.S.
0.33
0.17
7.15
448.00
368.00
1.73
147.84
62.56
12.37
265.90
2.66
268.56
40.28
308.84
30.88
30.90
13.81.2
Code
0802
9999
9988
0131
0115
9999
Two coats
Description
MATERIAL
Acrylic distemper 1st quality, having
VOC content less than 50 gm/kg
Brushes, putty etc.
LABOUR
Painter
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
Kg
L.S.
L.S.
0.99
11.57
4.42
38.00
1.73
1.73
37.62
20.02
7.65
day
day
L.S.
0.40
0.46
8.06
448.00
368.00
1.73
179.20
169.28
13.94
427.71
4.28
431.99
64.80
496.79
49.67
49.65
13.82
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre, of approved brand and
manufacture, including applying additional coats wherever required, to achieve
even shade and colour.
13.82.1
One coat
Code
0803
9999
9977
0131
0115
9999
9999
13.82.2
Code
0803
Description
Unit
Quantity
litre
L.S.
L.S.
0.53
0.52
5.33
180.00
1.73
1.73
95.40
0.90
9.22
day
day
L.S.
L.S.
0.36
0.36
8.06
6.76
448.00
368.00
1.73
1.73
161.28
132.48
13.94
11.69
424.91
4.25
429.16
64.37
493.53
49.35
49.35
Description
Unit
Quantity

MATERIAL
Acrylic emulsion , having VOC content
less than 50 gm/ltr
litre
0.84

MATERIAL
Acrylic emulsion , having VOC content
less than 50 gm/ltr
MATERIAL
LABOUR
Painter
Coolie
Brushes, sand paper etc.
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
Amount
Two coats
823
Rate
180.00
Amount
151.20
Code
Description
Unit
Quantity
9999
9977
MATERIAL
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
L.S.
1.43
6.76
1.73
1.73
2.47
11.69
day
day
L.S.
L.S.
0.54
0.54
10.79
6.76
448.00
368.00
1.73
1.73
241.92
198.72
18.67
11.69
636.36
6.36
642.72
96.41
739.13
73.91
73.90
0131
0115
9999
9999
Rate
Amount
13.83
Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile Organic Compound ) content less than 50 grams/ litre of approved
brand and manufacture, including applying additional coats wherever required
to achieve even shade and colour.
13.83.1
One coat
Code
0804
9999
9977
0131
0115
9999
9999
13.83.2
Code
0804
9999
9977
Description
Unit
Quantity
litre
L.S.
L.S.
0.38
0.52
0.91
210.00
1.73
1.73
79.80
0.90
1.57
day
day
L.S.
L.S.
0.36
0.36
8.06
6.76
448.00
368.00
1.73
1.73
161.28
132.48
13.94
11.69
401.66
4.02
405.68
60.85
466.53
46.65
46.65
Description
Unit
Quantity

MATERIAL
Premium acrylic emulsion of interior grade,
having VOC content less than 50 gm/ltr.
MATERIAL
litre
L.S.
L.S.
0.60
1.43
6.76

MATERIAL
Premium acrylic emulsion of interior grade,
having VOC content less than 50 gm/ltr.
MATERIAL
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
Amount
Two coats
824
Rate
210.00
1.73
1.73
Amount
126.00
2.47
11.69
Code
0131
0115
9999
9999
Description
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
L.S.
L.S.
0.54
0.54
10.79
6.76
Rate
448.00
368.00
1.73
1.73
Amount
241.92
198.72
18.67
11.69
611.16
6.11
617.27
92.59
709.86
70.98
71.00
13.84
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound)
content less than 150 grams/ litre, of approved brand and manufacture, including
applying additional coats wherever required to achieve even shade and colour.
13.84.1
One coat
Code
0805
9999
0131
0115
9999
9999
9999
13.84.2
Code
0805
9999
9977
Description
Unit
Quantity
litre
0.53
200.00
106.00
L.S.
0.52
1.73
0.90
day
day
L.S.
L.S.
L.S.
0.36
0.36
2.73
5.33
8.06
448.00
368.00
1.73
1.73
1.73
161.28
132.48
4.72
9.22
13.94
428.54
4.29
432.83
64.92
497.75
49.77
49.75
Description
Unit
Quantity

MATERIAL
Synthetic enamel paint, having VOC
(Volatile Organic Compound) content less
than 150 gm/ltr.
MATERIAL
litre
L.S.
L.S.
0.84
5.33
1.43

MATERIAL
Synthetic enamel paint , having VOC
(Volatile Organic Compound) content less
than 150 gm/ltr.
Material for filling in holes and cracks
(putty) etc.
LABOUR
Painter
Coolie
Putty
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
Amount
Two coats
825
Rate
200.00
1.73
1.73
Amount
168.00
9.22
2.47
Code
0131
0115
9999
9999
Description
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
L.S.
L.S.
0.54
0.54
6.76
8.06
Rate
448.00
368.00
1.73
1.73
Amount
241.92
198.72
11.69
13.94
645.96
6.46
652.42
97.86
750.28
75.02
75.00
13.85
Applying priming coats with primer of approved brand and manufacture, having
low VOC (Volatile Organic Compound ) content.
13.85.1
With ready mixed pink or grey primer on wood work (hard and soft wood) having
VOC content less than 50 grams/ litre
Code
0806
9999
9977
0131
0115
9999
9999
13.85.2
Code
0807
9977
Description
MATERIAL
Ready mixed pink or grey primer on wood
work (hard and soft wood) having VOC
content less than 50 gms/lit.
Putty
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
0.75
2.73
0.39
125.00
1.73
1.73
93.75
4.72
0.67
day
day
L.S.
L.S.
0.25
0.25
5.33
10.79
448.00
368.00
1.73
1.73
112.00
92.00
9.22
18.67
331.03
3.31
334.34
50.15
384.49
38.44
38.45
With ready mixed red oxide zinc chromatic on steel / iron works having VOC
content less than 250 grams/ litre
Description
Unit
Quantity

MATERIAL
Ready mixed red oxide zinc chromatic on
steel/ iron work, having VOC content less
than 250 gms/lit.
litre
L.S.
0.54
0.52
826
Rate
120.00
1.73
Amount
64.80
0.90
Code
0131
0115
9999
13.85.3
Code
0808
9977
0131
0115
9999
13.86
Code
0772
9977
0155
0115
Description
LABOUR
Painter
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
L.S.
0.24
0.24
10.79
Rate
448.00
368.00
1.73
Amount
107.52
88.32
18.67
280.21
2.80
283.01
42.45
325.46
32.54
32.55
With water thinnable cement primer on wall surface having VOC content less
than 50 grams/litre
Description
MATERIAL
50 gms/lit.
LABOUR
Painter
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.70
8.06
56.00
1.73
39.20
13.94
day
day
L.S.
0.40
0.20
7.15
448.00
368.00
1.73
179.20
73.60
12.37
318.31
3.18
321.49
48.22
369.71
36.97
36.95
6 mm plaster on cement concrete or reinforced cement concrete work with white

cement based polymer modified self curing mortar of approved make as per the
direction of Engineer-In-Charge.
Description
Unit

MATERIAL
White cement based polymer modified self
curing compound in powder form
i/c 2% wastage
Carriage of white cement based polymer
modified self curing compound in
powder form
LABOUR
Mason (average)
Coolie
827
Quantity
Rate
Amount
kg
46.00
15.00
690.00
L.S.
7.80
1.73
13.49
day
day
0.51
0.75
467.00
368.00
238.17
276.00
Code
Description
9999
Extra for removing burrs, cleaning with wire

brushes and pock making with pointed
tools etc.
Scaffolding and sunderies
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
9999
828
Unit
Quantity
L.S.
L.S.
13.39
11.70
Rate
1.73
1.73
Amount
23.16
20.24
1261.06
12.61
1273.67
191.05
1464.72
146.47
146.45
SUB HEAD : 14.0
REPAIRS TO BUILDING
829
14.1
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.

meters and under, including cutting the patch in proper shape, raking out
joints and preparing and plastering the surface of the walls complete, including
disposal of rubbish to the dumping ground, all complete as per direction of
Engineer-in-Charge.
14.1.1
With cement mortar 1:4 (1 cement : 4 fine sand)
Code
3.4
0155
0115
0114
0101
9999
14.1.2
Code
3.9
0155
0115
0114
0101
9999
Description
MATERIAL
LABOUR
Mason (average)
Coolie
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.183
3499.70
640.45
day
day
day
day
L.S.
1.21
1.29
0.54
0.92
15.21
467.00
368.00
368.00
407.00
1.73
565.07
474.72
198.72
374.44
26.31
2279.71
22.80
2302.51
345.38
2647.89
264.78
264.80
With cement mortar 1:4 (1cement: 4 coarse sand)

Description
MATERIAL
4 coarse sand)
LABOUR
Mason (average)
Coolie
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
SUB HEAD : 14- REPAIRS TO BUILDING
831
Unit
Quantity
Rate
Amount
cum
0.183
3970.50
726.60
day
day
day
day
L.S.
1.21
1.29
0.54
0.92
15.21
467.00
368.00
368.00
407.00
1.73
565.07
474.72
198.72
374.44
26.31
2365.86
23.66
2389.52
358.43
2747.95
274.79
274.80
14.2
Fixing chowkhats in existing opening including embedding chowkhats in

floors or walls cutting masonry for holdfasts, embedding hold fasts in
cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6
(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size),
painting two coats of approved wood preservative to sides of chowkhats
and making good the damages to walls and floors as required complete,
including disposal of rubbish to the dumping ground, all complete as per
direction of Engineer-in-Charge.
14.2.1
Door chowkhats
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0130
0123
0124
0128
9999
9999
9999
3.6
9999
9999
9999
0155
0114
9999
14.2.2
Code
0295
0297
Description
Unit
Quantity
cum
0.021
1300.00
27.30
cum
0.0072
1300.00
9.36
cum
cum
cum
tonne
tonne
day
day
day
day
day
day
L.S.
L.S.
L.S.
0.0282
0.0141
0.0141
0.0066
0.0066
0.027
0.0195
0.0084
0.0018
0.0018
0.0012
1.43
0.78
0.39
103.77
1200.00
103.77
5700.00
92.24
368.00
368.00
487.00
487.00
448.00
407.00
1.73
1.73
1.73
2.93
16.92
1.46
37.62
0.61
9.94
7.18
4.09
0.88
0.81
0.49
2.47
1.35
0.67
cum
L.S.
L.S.
L.S.
day
day
L.S.
0.01
24.18
13.52
1.82
0.50
0.75
2.73
2746.70
1.73
1.73
1.73
467.00
368.00
1.73
27.47
41.83
23.39
3.15
233.50
276.00
4.72
734.14
7.34
741.48
111.22
852.70
852.70
Description
Unit
Quantity
Detail of cost for each

Stone Aggregate (Single size) : 20 mm
nominal size
nominal size
cum
0.014
1300.00
18.20
cum
0.0048
1300.00
6.24

nominal size
nominal size
nominal size
Carriage of Cement
Beldar
Coolie
Mistry
Mason (brick layer) 2nd class
Mate
Scaffolding
Sundries
Cement concrete 1:2:4 filled in chase cut
Painting two coats of coaltar
Disposal of mulba
Mason (average)
Beldar
Sundries
TOTAL
TOTAL
Cost of each
Say
Rate
Amount
Window chowkhats
832
Rate
Amount
Code
Description
2202

nominal size
Carriage of Cement
Beldar
Coolie
Mistry
Mate
Hire and running charges of mechanical
mixer
Sundries
Cement concrete 1:2:4
Mason (average)
Beldar
TOTAL
TOTAL
Cost of each
Say
0982
2203
0367
2209
0114
0115
0130
0123
0124
0128
9999
9999
9999
3.6
9999
9999
0155
0114
14.2.3
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0130
0123
0124
0128
9999
9999
9999
3.6
Unit
Quantity
Rate
0.0188
0.0094
0.0094
0.0044
0.0044
0.018
0.013
0.0056
0.0012
0.0012
0.0008
0.91
103.77
1200.00
103.77
5700.00
92.24
368.00
368.00
487.00
487.00
448.00
407.00
1.73
1.95
11.28
0.98
25.08
0.41
6.62
4.78
2.73
0.58
0.54
0.33
1.57
L.S.
L.S.
0.52
0.26
1.73
1.73
0.90
0.45
cum
L.S.
L.S.
day
day
0.006
9.88
0.91
0.33
0.50
2746.70
1.73
1.73
467.00
368.00
16.48
17.09
1.57
154.11
184.00
455.89
4.56
460.45
69.07
529.52
529.50
Unit
Quantity
cum
0.007
1300.00
9.10
cum
0.0024
1300.00
3.12
cum
cum
cum
tonne
tonne
day
day
day
day
day
day
L.S.
L.S.
L.S.
0.0094
0.0047
0.0047
0.0022
0.0022
0.009
0.0065
0.0028
0.0006
0.0006
0.0004
0.52
0.26
0.13
103.77
1200.00
103.77
5700.00
92.24
368.00
368.00
487.00
487.00
448.00
407.00
1.73
1.73
1.73
0.98
5.64
0.49
12.54
0.20
3.31
2.39
1.36
0.29
0.27
0.16
0.90
0.45
0.22
0.003
2746.70
8.24
cum
cum
cum
tonne
tonne
day
day
day
day
day
day
L.S.
Amount
Clerestory window chowkhats

Description
nominal size
nominal size
nominal size
Carriage of Cement
Beldar
Coolie
Mistry
Mate
Sundries
833
cum
Rate
Amount
Code
Description
Unit
Quantity
9999
9999
0155
0114
9999

Mason (average)
Beldar
Sundries
TOTAL
TOTAL
Cost of each
Say
L.S.
L.S.
day
day
L.S.
8.06
0.91
0.17
0.50
2.73
14.3
Code
0114
0115
0130
0128
9999
7019
9999
Rate
1.73
1.73
467.00
368.00
1.73
Amount
13.94
1.57
79.39
184.00
4.72
333.28
3.33
336.61
50.49
387.10
387.10
Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/
Chemical fasteners of appropriate size (3 nos on each vertical member of
door chowkhat and 2 nos on each vertical member of window chowkhats),
including Cost of dash fasteners/ chemical fastener.
Description
Details of cost for 1 chowkhat.
Beldar
Coolie
Mistry
Mate
Disposal of mulba
Dash fastner/ chemical fastener
Hire charges of drill machine hire charges,
Scaffolding and Sundries
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
day
day
day
day
L.S.
each
0.027
0.0195
0.0084
0.0012
1.82
6.00
368.00
368.00
487.00
407.00
1.73
15.00
9.94
7.18
4.09
0.49
3.15
90.00
L.S.
12.22
1.73
21.14
135.99
1.36
137.35
20.60
157.95
157.95
14.4
Making the opening in brick masonry including dismantling in floor or walls

by cutting masonry and making good the damages to walls, flooring and
jambs complete, to match existing surface i/c disposal of mulba/ rubbish
to the nearest municipal dumping ground, all complete as per direction of
Engineer-in-Charge.
14.4.1
For door/ window/ clerestory window
Code
Description
Unit
Quantity
3.6
9999
0124
0114
0115
Details of cost for one opening of size

0.90x2.10m = 1.89 sqm
Cement mortar 1:6 (1 cement: 6 fine sand)
Beldar
Coolie
cum
L.S.
day
day
day
0.01
24.57
0.50
1.20
0.40
834
Rate
2746.70
1.73
448.00
368.00
368.00
Amount
27.47
42.51
224.00
441.60
147.20
Code
Description
Unit
Quantity
9999
Scaffolding and Sundries

TOTAL
TOTAL
Cost of 1.89sqm.
Cost of 1.00 sqm.
Say
L.S.
3.50
Rate
1.73
Amount
6.06
888.84
8.89
897.73
134.66
1032.39
546.23
546.25
14.5
Renewing glass panes, with putty and nails wherever necessary including
racking out the old putty:
14.5.1
Float glass panes of thickness 4 mm
Code
2406
9988
0863
9999
9999
0119
0114
9999
14.5.2
Code
2407
9988
0863
9999
9999
0119
0114
Description
Detail of cost for 10 glasses area each
0.1sqm.
MATERIAL
Float glass sheet of nominal thickness
4 mm (weight not less than 10kg/sqm).
1.00 sqm + 10% wastage= 1.10 Sqm
Carriage including sundries
Putty for wood work
Painting or varnishing or beewaxing
Sundries Nails etc.
Glazier
Beldar
Sundries such as Rag, cotton etc
TOTAL
TOTAL
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
sqm
1.10
286.00
314.60
L.S.
kilogram
L.S.
L.S.
day
day
L.S.
1.82
0.68
5.33
6.76
0.23
0.23
1.43
1.73
30.00
1.73
1.73
448.00
368.00
1.73
3.15
20.40
9.22
11.69
103.04
84.64
2.47
549.21
5.49
554.70
83.21
637.91
637.90
Float glass panes of thickness 5.5 mm

Description
0.1sqm.
MATERIAL
5.5 mm.(weight not less than 13.50 kg/sqm).
Carriage including sundries
Putty for wood work
Sundries Nails etc.
Glazier
Beldar
835
Unit
Quantity
Rate
Amount
sqm
1.10
490.00
539.00
L.S.
kilogram
L.S.
L.S.
day
day
1.82
0.68
5.33
6.76
0.23
0.23
1.73
30.00
1.73
1.73
448.00
368.00
3.15
20.40
9.22
11.69
103.04
84.64
Code
Description
Unit
Quantity
9999

TOTAL
TOTAL
Cost of 1.00 sqm
Say
L.S.
1.43
Rate
1.73
14.6
Renewing glass panes, with wooden fillets wherever necessary:
14.6.1
Code
2406
1189
1194
1196
9999
9999
0112
0119
0114
9999
14.6.2
Code
2407
1189
1194
1196
9999
9999
0112
Description
0.1sqm.
MATERIAL
Second class teak wood in scantling
Second class deodar wood in planks
First class kail wood in planks
Sundries Nails etc.
Carpenter 2nd class
Glazier
Beldar
TOTAL
TOTAL
Cost of 1.00 sqm
Say
Rate
Amount
2.47
773.61
7.74
781.35
117.20
898.55
898.55
Unit
Quantity
Amount
sqm
1.10
286.00
314.60
10 cudm
10 cudm
10 cudm
L.S.
L.S.
day
day
day
L.S.
0.025
0.025
0.025
4.42
2.73
0.20
0.25
0.45
1.82
660.00
500.00
310.00
1.73
1.73
448.00
448.00
368.00
1.73
16.50
12.50
7.75
7.65
4.72
89.60
112.00
165.60
3.15
734.07
7.34
741.41
111.21
852.62
852.60

Description
0.1sqm.
MATERIAL
Second class teak wood in scantling
Second class deodar wood in planks
First class kail wood in planks
Sundries Nails etc.
Carpenter 2nd class
836
Unit
Quantity
sqm
1.10
490.00
539.00
0.025
0.025
0.025
4.42
2.73
0.20
660.00
500.00
310.00
1.73
1.73
448.00
16.50
12.50
7.75
7.65
4.72
89.60
10 cudm
10 cudm
10 cudm
L.S.
L.S.
day
Rate
Amount
Code
Description
Unit
Quantity
0119
0114
9999
Glazier
Beldar
TOTAL
TOTAL
Cost of 1.00 sqm
Say
day
day
L.S.
0.25
0.45
1.82
Rate
448.00
368.00
1.73
14.7
Renewing glass panes and refixing existing wooden fillets:
14.7.1
Code
2406
9977
9999
9999
0119
0114
9999
14.7.2
Code
2407
9977
9999
9999
0119
0114
Description
0.1sqm.
MATERIAL
Carriage of glasspanes and other materials
Sundries Nails etc.
Methylated spirit
Glazier
Beldar
Sundries
TOTAL
TOTAL
Cost of 1.00 sqm
Say
Rate
Amount
112.00
165.60
3.15
958.47
9.58
968.05
145.21
1113.26
1113.25
Unit
Quantity
Amount
sqm
1.10
286.00
314.60
L.S.
L.S.
L.S.
day
day
L.S.
2.73
9.88
5.33
0.30
0.30
1.43
1.73
1.73
1.73
448.00
368.00
1.73
4.72
17.09
9.22
134.40
110.40
2.47
592.90
5.93
598.83
89.82
688.65
688.65

Description
0.1sqm.
MATERIAL
Carriage of glasspanes and other materials
Sundries Nails etc.
Methylated spirit
Glazier
Beldar
837
Unit
Quantity
Rate
Amount
sqm
1.10
490.00
539.00
L.S.
L.S.
L.S.
day
day
2.73
9.88
5.33
0.30
0.30
1.73
1.73
1.73
448.00
368.00
4.72
17.09
9.22
134.40
110.40
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 1.00 sqm
Say
L.S.
1.43
Rate
1.73
14.8
Supplying and fixing new wooden fillets wherever necessary:
14.8.1
2nd class teak wood fillets
Code
1190
9999
0112
0114
9999
14.8.2
Code
2466
9999
0112
0114
9999
Description
Unit
Details of cost for 10 metres length

MATERIAL
Second class teak wood in planks
10.00x0.01x0.01 = 1.00 cudm
Add 15% wastage = 0.15 cudm
Total = 1.15 cudm
Nails
LABOUR
Carpenter 2nd class
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
Quantity
Rate
Amount
2.47
817.30
8.17
825.47
123.82
949.29
949.30
Amount
10 cudm
0.115
675.00
77.63
L.S.
26.91
1.73
46.55
day
day
L.S.
0.25
0.25
2.73
448.00
368.00
1.73
112.00
92.00
4.72
332.90
3.33
336.23
50.43
386.66
38.66
38.65
Unit
Quantity
Hollock wood fillets

Description
MATERIAL
Hollock wood in scantling
10.00x0.01x0.01 = 1.00 cudm
Add 15% wastage = 0.15 cudm
Total = 1.15 cudm
Nails
LABOUR
Carpenter 2nd class
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
838
Rate
Amount
10 cudm
0.115
340.00
39.10
L.S.
26.91
1.73
46.55
day
day
L.S.
0.25
0.25
2.73
448.00
368.00
1.73
112.00
92.00
4.72
294.37
2.94
297.31
44.60
341.91
34.19
34.20
14.9
Code
0863
9999
9999
0112
0114
9999
14.10
Code
0863
9999
9999
0119
0114
9999
14.11
Code
0119
0114
9999
9999
Renewal of old putty of glass panes (length)

Description
Unit

MATERIAL
Putty for wood work
Nails
Spirit
LABOUR
Carpenter 2nd class
Beldar
Sundries
TOTAL
TOTAL
Cost of 13.00 metres
Cost of 1.00 metre
Say
Quantity
Rate
Amount
kilogram
L.S.
L.S.
0.68
7.15
2.73
30.00
1.73
1.73
20.40
12.37
4.72
day
day
L.S.
0.30
0.30
1.43
448.00
368.00
1.73
134.40
110.40
2.47
284.76
2.85
287.61
43.14
330.75
25.44
25.45
Refixing old glass panes with putty and nails

Description
Unit
Details of cost for 1 sqm

Putty for wood work
Spirit
Nails
LABOUR
Glazier
Beldar
Sundries
TOTAL
TOTAL
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
kilogram
L.S.
L.S.
0.68
2.73
7.15
30.00
1.73
1.73
20.40
4.72
12.37
day
day
L.S.
0.30
0.30
1.43
448.00
368.00
1.73
134.40
110.40
2.47
284.76
2.85
287.61
43.14
330.75
330.75
Fixing old glass panes with wooden fillets (excluding cost of fillets)
Description
LABOUR
Glazier
Beldar
Sundries
Nails
TOTAL
TOTAL
Cost of 1.00 sqm
Say
839
Unit
Quantity
day
day
L.S.
L.S.
0.30
0.30
1.43
3.90
Rate
448.00
368.00
1.73
1.73
Amount
134.40
110.40
2.47
6.75
254.02
2.54
256.56
38.48
295.04
295.05
14.12
Code
1003
9999
9999
0102
0124
0114
9999
14.13
Code
0155
0114
0155
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in
existing R.C.C. slab, including cutting chase, anchoring clamp to
reinforcement bar, including cleaning, refilling, making good the chase with
matching concrete, plastering and painting the exposed portion of the
clamps complete.
Description
Details of cost for each fan clamp.
MATERIAL
M.S.bar 16mm dia = 40cm (including
wastage) @ 1.58 kg/m = 0.632 kg
Mild steel round bar above 12 mm dia
Cement concrete 1:2:4 (1 Cement : 2
Coarse sand : 4 graded stone aggregate
20mm nominal size) mortar for rendering or
plastering
Painting two or more coats to exposed
portion of the clamp including priming coat
Labour for fixing
Blacksmith 1st class
Beldar
Sundries
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
quintal
0.00632
3575.00
22.59
L.S.
13.52
1.73
23.39
L.S.
7.15
1.73
12.37
day
day
day
L.S.
0.03
0.12
0.25
2.73
487.00
448.00
368.00
1.73
14.61
53.76
92.00
4.72
223.44
2.23
225.67
33.85
259.52
259.50
Regrading terracing of mud phaska covered with tiles or brick, in cement

by dismantling tiles or bricks, removing mud plaster, preparing the surface
of mud phaska to proper slope, relaying mud plaster gobri leaping and
tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand),
including replacing unserviceable tiles or bricks with new ones and disposal
of unserviceable material to the dumping ground (the cost of the new tiles
or brick excluded), all complete as per direction of Engineer-in-Charge.
Description
(i) Dismantling tiles/bricks in cement mortar
including removing mud plaster and
cleaning the tiles/bricks
LABOUR
Mason (average)
Beldar
(ii) Preparing the surface, for mud phuska
to proper slope, relaying mud plaster gobri
leeping.
Mason (average)
25mm thick mud plaster including gobri
leaping
840
Unit
Quantity
Rate
Amount
day
day
0.54
0.54
467.00
368.00
252.18
198.72
day
0.27
467.00
126.09
Code
3.18
0308
3.18
0114
3.3
0155
0114
0101
9999
9999
Description
MATERIAL
Mud mortar
Bhusa
Gobri mortar
SH: Mortars
LABOUR
Beldar
(iii) relaying tiles/bricks (Rate as per
item No 3.3)
including Cement mortar 1:3 (1 Cement :
3 fine sand) for grouting
LABOUR
Mason (average)
Beldar
Bhisti
Disposal of mulba
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
quintal
0.24
0.084
533.20
600.00
127.97
50.40
cum
0.12
533.20
63.98
day
0.25
368.00
92.00
cum
0.061
4252.70
259.41
day
day
day
L.S.
L.S.
1.20
1.50
1.00
5.33
2.73
467.00
368.00
407.00
1.73
1.73
560.40
552.00
407.00
9.22
4.72
2704.09
27.04
2731.13
409.67
3140.80
314.08
314.10
14.14
Replacing sand stone slabs in roofing, laid in cement mortar 1:4 (1 cement : 4
coarse sand), including necessary repairs and cement pointing with same mortar
complete, including disposal of rubbish to dumping ground, all complete as per
direction of Engineer-in-Charge.
14.14.1
Red/ white sand stone slabs 30 to 50 mm thick
Code
0114
0115
9999
9999
1174
2216
3.9
3.3
0155
Description
Dismantling existing stone, slabs roofing
1x10 sqmx0.05m = 0.50 cum.
Beldar
Coolie
Sundries
Cleaning the surface including necessary
repairs
Red sand stone slab 45 mm and 50 mm
thick (un-dressed)
Carriage of Stone blocks white & red sand
stone & kota stone slab
4 coarse sand)
Mason (average)
841
Unit
Quantity
Rate
Amount
day
day
L.S.
0.885
0.375
4.03
368.00
368.00
1.73
325.68
138.00
6.97
L.S.
40.43
1.73
69.94
sqm
11.00
225.00
2475.00
tonne
1.41
92.24
130.06
cum
0.0105
3970.50
41.69
cum
day
0.0075
1.69
4252.70
467.00
31.90
789.23
Code
Description
Unit
Quantity
0100
0115
0101
9999
2264
Bandhani
Coolie
Bhisti
Sundries
Carriage of Rubbish
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
day
day
day
L.S.
cum
2.03
1.69
0.34
16.12
0.50
Rate
407.00
368.00
407.00
1.73
103.77
Amount
826.21
621.92
138.38
27.89
51.88
5674.75
56.75
5731.50
859.73
6591.23
659.12
659.10
14.15
Renewing wooden battens in roofs, including making good the holes in wall
and painting with oil type wood preservative of approved brand and manufacture
complete, including removal of rubbish to the dumping ground, all complete as
per direction of Engineer-in-Charge.
14.15.1
Sal wood battens
Code
1199
2204
0112
0114
9999
9999
0859
0131
0115
9977
9999
9999
Description
Unit
Details of cost for 10 battens i.e. 300 cudm

3 metres long of 100x100mm
10x3x0.1x0.1 = 0.3cum =300cudm
Add wastage @ 2%= 6 cudm, Total
= 306 cudm
MATERIAL
Sal wood in scantling
Carriage of Timber
LABOUR
Taking out the existing battens and refixing
new one including supporting the roof
Carpenter 2nd class
Beldar
Disposal of mulba
Making good the holes including sundries
Painter
Coolie
Carriage
Brushes
Sundries
TOTAL
TOTAL
Cost of 300 Cudm
Cost of 1.00 cum
Say
842
Quantity
Rate
Amount
10 cudm
cum
30.60
0.306
600.00
118.59
18360.00
36.29
day
day
L.S.
L.S.
litre
day
day
L.S.
L.S.
L.S.
0.50
2.00
5.33
80.73
1.22
0.183
0.183
0.78
5.07
4.81
448.00
368.00
1.73
1.73
140.00
448.00
368.00
1.73
1.73
1.73
224.00
736.00
9.22
139.66
170.80
81.98
67.34
1.35
8.77
8.32
19843.73
198.44
20042.17
3006.33
23048.50
76828.33
76828.35
14.16
Renewing wooden beams in roofs including making good the holes in walls and
painting with oil type wood preservative of approved brand and manufacture complete,
including removal of rubbish to the dumping ground, all complete as per direction of
Engineer-in-Charge.
14.16.1
Not exceeding 4.00 metres in length.
14.16.1.1
Sal wood beams
Code
1199
2204
0112
0114
0155
0100
0114
1199
2204
0112
0100
0114
0859
0131
0115
9999
9977
9999
9999
9999
Description
Unit
Details of cost for 300 cudm or 0.3 cum

Consider one beam i.e. 300 cudm.
0.25 x 0.30m x 4.0m (long) = 0.30 cum
Add wastage @ 2% (0.006 cum)
= 0.306 cum =306 cudm
(i) Propping the roof
MATERIAL
100mm diameter ballies 4m long 10 nos.
100x100mm salwood battens 1.0 metre
long 5 nos.x1.0x0.1x0.1 =0.05cum
= 50 cudm.
These materials can be used for 16 times
Hence qty for one operation 1/16
= 3.125 cudm
Carriage of Timber
LABOUR
Carpenter 2nd class
Beldar
(ii) Taking out the existing beams etc.
LABOUR
Mason (average)
Bandhani
Beldar
(iii) Renewal
Materials and Labour
Carriage of Timber
Carpenter 2nd class
Bandhani
Beldar
Painting with oil preservative
(4x1.1) +( 2.0x0.25x0.30) =4.4 + 0.15
= 4.55 sqm
Painter
Coolie
Sundries
Carriage
Brushes
Making good the holes
Sundries
843
10 cudm
cum
Quantity
Rate
Amount
0.3125
0.0228
600.00
118.59
187.50
2.70
day
day
0.25
0.25
448.00
368.00
112.00
92.00
day
day
day
0.13
0.50
0.33
467.00
407.00
368.00
60.71
203.50
121.44
10 cudm
cum
day
day
day
30.60
0.306
1.00
0.50
1.00
600.00
118.59
448.00
407.00
368.00
18360.00
36.29
448.00
203.50
368.00
litre
day
day
L.S.
L.S.
L.S.
L.S.
L.S.
0.455
0.07
0.07
0.13
1.82
1.82
20.67
26.91
140.00
448.00
368.00
1.73
1.73
1.73
1.73
1.73
63.70
31.36
25.76
0.22
3.15
3.15
35.76
46.55
Code
Description
0302
Safeda ballies 125 mm diameter

TOTAL
TOTAL
Cost of 300 Cudm
Cost of 1.00 cum
Say
14.16.1.2
Code
2466
2204
0112
0114
0155
0100
0114
2466
2204
0112
0100
0114
0859
0131
0115
9999
Unit
Quantity
metre
2.50
Rate
35.00
Amount
87.50
20492.79
204.93
20697.72
3104.66
23802.38
79341.26
79341.25
Hollock wood beams

Description
Unit

Consider one beam
0.25 x 0.30m x 4.0m (long) = 0.30 cum
= 300 cudm
= 0.306 cum =306cudm
(I) Propping the roof
MATERIAL
100mm diameter ballies 4m long 10 nos.
100x100mm salwood battens 1.0metre
long 5 nos.x1.0x0.1x0.1 =0.05cum
= 50 cudm.
hence qty for one operation 1/16 = 3.125
cudm
Carriage of Timber
LABOUR
Carpenter 2nd class
Beldar
LABOUR
Mason (average)
Bandhani
Beldar
(iii) Renewal
Carriage of Timber
Carpenter 2nd class
Bandhani
Beldar
(4x1.1) + (2.0x0.25x0.30) =4.4 + 0.15
= 4.55 sqm
Painter
Coolie
Sundries
844
10 cudm
cum
Quantity
Rate
Amount
0.3125
0.0228
340.00
118.59
106.25
2.70
day
day
0.25
0.25
448.00
368.00
112.00
92.00
day
day
day
0.13
0.50
0.33
467.00
407.00
368.00
60.71
203.50
121.44
10 cudm
cum
day
day
day
30.60
0.306
1.00
0.50
1.00
340.00
118.59
448.00
407.00
368.00
10404.00
36.29
448.00
203.50
368.00
litre
day
day
L.S.
0.455
0.07
0.07
0.13
140.00
448.00
368.00
1.73
63.70
31.36
25.76
0.22
Code
Description
9977
9999
9999
9999
0302
Carriage
Brushes
Sundries
TOTAL
TOTAL
Cost of 300 Cudm
Cost of 1.00 cum
Say
Unit
Quantity
L.S.
L.S.
L.S.
L.S.
metre
1.82
1.82
20.67
26.91
2.50
14.16.2
Above 4.00 metres and upto 5.00 metres length.
14.16.2.1
Sal wood beams
Code
1199
2204
0112
0114
0155
0100
0114
1199
2204
0112
0100
0114
Description
Unit

0.25 x 0.30m x 5.0m (long) = 0.375 cum
= 0.383 cum = 383cudm
MATERIAL
125mm diameter ballies 5m long 12 nos
long 6 nos. x1.0x0.1x0.1 = 60 cudm.
hence qty for one operation 1/16 = 3.75 cudm
Carriage of Timber
LABOUR
Carpenter 2nd class
Beldar
LABOUR
Mason (average)
Bandhani
Beldar
(iii) Renewal
Carriage of Timber
Carpenter 2nd class
Bandhani
Beldar
(2x5x0.25)+3.0 + 2.0x0.25x0.30
= 5.5 + 0.15 = 5.65 sqm
845
10 cudm
cum
Quantity
Rate
1.73
1.73
1.73
1.73
35.00
Rate
Amount
3.15
3.15
35.76
46.55
87.50
12455.54
124.56
12580.10
1887.02
14467.12
48223.73
48223.75
Amount
0.375
0.0498
600.00
118.59
225.00
5.91
day
day
0.25
0.25
448.00
368.00
112.00
92.00
day
day
day
0.25
0.63
0.50
467.00
407.00
368.00
116.75
256.41
184.00
10 cudm
cum
day
day
day
38.30
0.383
1.00
1.00
2.00
600.00
118.59
448.00
407.00
368.00
22980.00
45.42
448.00
407.00
736.00
Code
Description
0859
0131
0115
9999
9977
9999
9999
9999
0302

Painter
Coolie
Sundries
Carriage
Brushes
Sundries
TOTAL
TOTAL
Cost of 375 Cudm
Cost of 1.00 cum
Say
14.16.2.2
Code
2466
2204
0112
0114
0155
0100
0114
2466
2204
0112
0100
Unit
Quantity
litre
day
day
L.S.
L.S.
L.S.
L.S.
L.S.
metre
0.565
0.08
0.08
0.26
2.34
2.21
20.67
33.15
3.75
Rate
140.00
448.00
368.00
1.73
1.73
1.73
1.73
1.73
35.00
Amount
79.10
35.84
29.44
0.45
4.05
3.82
35.76
57.35
131.25
25985.55
259.86
26245.41
3936.81
30182.22
80485.92
80485.90
Hollock wood beams

Description
Unit

0.25 x 0.30m x 5.0m (long) = 0.375 cum
= 0.383 cum = 383cudm
MATERIAL
125mm diameter ballies 5m long 12 nos
long 6 nos. x1.0x0.1x0.1 = 60 cudm.
hence qty for one operation 1/16 = 3.75 cudm
Carriage of Timber
LABOUR
Carpenter 2nd class
Beldar
LABOUR
Mason (average)
Bandhani
Beldar
(iii) Renewal
Carriage of Timber
Carpenter 2nd class
Bandhani
846
10 cudm
cum
Quantity
Rate
Amount
0.375
0.0375
340.00
118.59
127.50
4.45
day
day
0.25
0.25
448.00
368.00
112.00
92.00
day
day
day
0.25
0.63
0.50
467.00
407.00
368.00
116.75
256.41
184.00
10 cudm
cum
day
day
38.30
0.383
1.00
1.00
340.00
118.59
448.00
407.00
13022.00
45.42
448.00
407.00
Code
Description
Unit
Quantity
0114
Beldar
(2x5x0.25)+3.0 + 2.0x0.25x0.30
= 5.5 + 0.15 = 5.65 sqm
Painter
Coolie
Sundries
Carriage
Brushes
Sundries
TOTAL
TOTAL
Cost of 375 Cudm
Cost of 1.00 cum
Say
day
2.00
368.00
736.00
litre
day
day
L.S.
L.S.
L.S.
L.S.
L.S.
metre
0.565
0.08
0.08
0.26
2.34
2.21
20.67
33.15
3.75
140.00
448.00
368.00
1.73
1.73
1.73
1.73
1.73
35.00
79.10
35.84
29.44
0.45
4.05
3.82
35.76
57.35
131.25
15928.59
159.29
16087.88
2413.18
18501.06
49336.16
49336.15
0859
0131
0115
9999
9977
9999
9999
9999
0302
14.17
Code
0114
0115
0101
9999
Rate
Amount
Raking out joints in lime or cement mortar and preparing the surface for re-pointing
or replastering, including disposal of rubbish to the dumping ground, all complete as
Description
LABOUR
Beldar
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
day
L.S.
0.53
0.08
0.07
1.43
Rate
368.00
368.00
407.00
1.73
Amount
195.04
29.44
28.49
2.47
255.44
2.55
257.99
38.70
296.69
29.66
29.65
14.18
Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of
integral water proofing compound by weight of cement for flat tile bricks on top of
mud phaska :
14.18.1
With F.P.S. brick tiles
Code
Description
Unit

MATERIAL
847
Quantity
Rate
Amount
Code
Description
3.3
1213

2% of wt. of cement
LABOUR
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
0115
0124
0101
9999
14.18.2
Code
3.3
1213
0115
0124
0101
9999
14.19
Code
Unit
Quantity
Rate
Amount
cum
kilogram
0.015
0.153
4252.70
35.00
63.79
5.36
day
day
day
L.S.
0.36
0.36
0.36
18.85
368.00
448.00
407.00
1.73
132.48
161.28
146.52
32.61
542.04
5.42
547.46
82.12
629.58
62.95
62.95
Unit
Quantity
With modular brick tiles

Description
MATERIAL
2% of wt. of cement
LABOUR
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
Amount
cum
kilogram
0.017
0.173
4252.70
35.00
72.30
6.06
day
day
day
L.S.
0.36
0.36
0.36
18.85
368.00
448.00
407.00
1.73
132.48
161.28
146.52
32.61
551.25
5.51
556.76
83.51
640.27
64.02
64.00
Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and
removing materials to any distance within compound and stacking.
Description
Unit
Details of cost for 30 mtrs of weight 63 kgs

M.S. Flats 40x6mm @ 1.9kg./m
= 30x1.9 = 57 kg. (A)
J' hook bolts @ 30cm centre to centre
= 101 Nos. x 0.15 m = 15.15 m @
0.40kg./ m = 6.06kg (B)
Total (A+B) = 63.06 kg Say 63 kg
848
Quantity
Rate
Amount
Code
0103
0100
0114
14.20
Code
1023
1208
1209
9977
0102
0114
9999
13.50.3
13.65.1
Description
LABOUR
Blacksmith 2nd class
Bandhani
Beldar
TOTAL
TOTAL
Cost for 63 kg.
Cost of 1.00 kg
Say
Unit
Quantity
day
day
day
0.09
0.06
0.16
Rate
448.00
407.00
368.00
Amount
40.32
24.42
58.88
123.62
1.24
124.86
18.73
143.59
2.27
2.25
Fixing of old wind tie with new fittings including painting two or more coats with
anticorrosive bitumastic paint of approved brand & manufacturer over and including
priming coat of ready mixed zinc chromate yellow primer of approved brand.
Description
Unit
Detail of cost for 20.2 m wind tie

MATERIAL
Galvanised steel J or L hooks 8 mm dia
@ 30 cm center to center = 68 Nos
Bitumen washer
G.I. plain washer thick
Carriage of bolts, nuts and washers etc.
LABOUR
Beldar
Sundries
Applying priming coat with ready mixed
zink chromate yellow primer
20.2x2x(0.04+0.006) = 1.86 sqm
Rate as per item no 13.50.3 of
SH : Finishing
Painting with ready mixed black antcorrosive
bitumastic paint
Rate as per item No.13.65.1 SH: Finishing
TOTAL
Add 1 % Water charges on all except (A)
i.e. on (1318.38 - 175.40) = 1142.98
TOTAL
on all except (A) i.e. on (1329.81
- 175.40) = 1154.41
Cost of 20.2 metres
Cost of 1.00 metre
Say
849
Quantity
Rate
Amount
10 Nos
6.80
115.00
782.00
100 Nos
100 Nos
L.S.
0.68
0.68
1.17
30.00
35.00
1.73
20.40
23.80
2.02
day
day
L.S.
0.34
0.34
13.91
487.00
368.00
1.73
165.58
125.12
24.06
sqm
1.86
29.10
54.13(A)
sqm
1.86
65.20
121.27(A)
1318.38
11.43
1329.81
173.16
1502.97
74.40
74.40
14.21
Code
1007
2205
15.12.2
4.2.5
3.6
9999
9999
13.50.3
0155
0114
9999
Renewing bottom rail and/or top runner of collapsible gate including making good all
damages and applying priming coat of zinc chromate yellow primer of approved
brand and manufacturer.
Description
Unit
Detail of cost for gate of size 1.52x2.4 m

(weight 11.55 kg)
MATERIAL
M.S. Tee 40x40x6 mm
Top rail = 1.725 m
Bottom rail = 1.570 m
Total = 3.295 m say 3.30 m @ 3.5 kg/m
= 11.55 kg
Add 10% wastage = 1.155 kg
Total = 12.705 kg = 0.1270 q say 0.13 q
Structurals such as tees,angles channels
and R.S. joists
Carriage of Steel
Taking out collapsible gate including frame
(Rate as per item no 15.12.2 of
SH Dismantling and Demolishing)
Refixing of collapsible gate including
mending good the demaged floor, wall
etc.frame
Cement concrete 1:3:6 (1 cement : 3
coarse sand : 6 graded stone aggregate 20
mm nominal size)
SH : Concrete work
6 fine sand) (Rate as per item No 3.6)
Disposal of mulba
Priming coat on Tees 0.16x3.3 = 0.53 sqm
SH : Finishing
LABOUR
Labour for fixing the gate
Mason (average)
Beldar
Sundries
TOTAL
i.e. on (1490.00 - 411.60) = 1078.40
TOTAL
- 411.60) = 1089.18
Cost of 11.55 kg
Cost of 1.00 kg
Say
850
Quantity
Rate
Amount
quintal
tonne
0.13
0.013
3775.00
92.24
490.75
1.20
each
1.00
216.40
216.40
cum
0.03
5992.75
179.78(A)
cum
L.S.
L.S.
0.01
24.18
1.82
2746.70
1.73
1.73
27.47
41.83
3.15
sqm
0.53
29.10
15.42(A)
day
day
L.S.
0.50
0.75
2.60
467.00
368.00
1.73
233.50
276.00
4.50
1490.00
10.78
1500.78
163.38
1664.16
144.08
144.10
14.22
Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and
fixing the same with necessary clamps, nuts and bolts/welding and erection etc.
complete.
14.22.1
Wheel 50 mm dia and below
Code
0103
0100
0114
9999
7442
1008
1034
1215
0102
0100
0114
13.50.3
9999
Description
Detail of cost for 10 nos wheels of 40 mm dia.
MATERIAL
Weight of 10 nos wheels
10x[3.14x{(4/2)x(4/2)}x4]x7.850/1000
= 3.94 kg
Weight of 10 nos clamps 6 mm thick =10x
lenth of clamp =10x0.17m @ 1.90kg/m =
3.23 kg
Weight of 10 nos 10 mm dia. Bolts, 10 cm
long 10x0.10m = 1m @ 0.60 kg/m = 0.60 kg
Total = 7.70 kg say 8 kg
Labour for dismantling :
Bandhani
Beldar
Sundries
Renewing the wheels with clamps :MATERIAL
Wheel 75 mm dia. 40 mm wide
10 nos clamps out of M.S. flat 40x6 mm,
170 mm long = 10x0.17m = 1.70m @ 1.9
kg/m = 3.23 kg
Total = 3.39 kg say 3.50 kg
Flats upto 10 mm in thickness
M.S. bolt/pin 10 mm dia 10 cm long 10 Nos
10x0.06 = 0.6 kg = 0.006 q
Bolts and nuts upto 300 mm in length
Welding by electric plant
length = 10x(2x4) = 80cm
LABOUR
Labour for cutting, assembling and errection
charges
Bandhani
Beldar
Priming coat : = 10x2(0.06+0.008)x0.25m
= 0.34 sqm on Tees 0.16x3.3 = 0.53 sqm
Rate as per item no 13.50.3 of SH : Finishing
Sundries
TOTAL
i.e. on (1056.76 - 4.80) = 1051.96
TOTAL
- 4.80) = 1062.48
Cost of 10 nos wheels
Cost per wheel
Say
851
Unit
Quantity
Rate
Amount
day
day
day
L.S.
0.01
0.01
0.02
0.39
448.00
407.00
368.00
1.73
4.48
4.07
7.36
0.67
each
10.00
65.00
650.00
quintal
0.035
3675.00
128.63
quintal
cm
0.006
80.00
5100.00
2.00
30.60
160.00
day
day
day
0.03
0.02
0.11
487.00
407.00
368.00
14.61
8.14
40.48
sqm
L.S.
0.165
1.69
29.10
1.73
4.80(A)
2.92
1056.76
10.52
1067.28
159.37
1226.65
122.66
122.65
14.22.2
Code
0103
0100
0114
9999
7442
1008
1034
1215
0102
0100
0114
13.50.3
9999
Wheel above 50 mm dia

Description
Detail of cost for 10 nos wheels
Considering average wheel dia =75 mm
Width of wheel = 40 mm
M.S. flat for clamp = 60x8 mm
Bolt size 16 mm dia.
Lenth of one clamp :
2x(0.04+0.0375+0.02)+0.05 =0.195+0.05
=0.245m say 0.25m
MATERIAL
Weight of 10 nos wheels
10x[3.14x{(7.5/2)x(7.5/2)}x4]x7.850/1000
= 13.87 kg
Weight of 10 nos clamps 8 mm thick
=10x0.25 m @ 3.8kg/m = 9.50 kg
Weight of 10 nos 16 mm dia. Bolts, 10 cm
long 10x0.10 m @ 1.60 kg/m = 1.60 kg
Labour for dismantling :
Bandhani
Beldar
Sundries
Renewing the wheels with clamps :MATERIAL
Wheel 75 mm dia. 40 mm wide
10 nos clamps out of M.S. flat 60x8 mm
= 10x0.25 m @ 3.8 kg/m = 9.5 kg
M.S. bolt/pin 16 mm dia 10 cm long 10 Nos
10x0.16= 1.6 kg = 0.016 q
length = 10x(2x6)
LABOUR
Labour for cutting, assembling and errection
charges
Bandhani
Beldar
Priming coat : = 10x2(0.06+0.008)x0.25m
= 0.34 sqm on Tees 0.16x3.3 = 0.53 sqm
Sundries
TOTAL
i.e. on (1613.75 - 9.89) = 1603.86
TOTAL
- 9.89) = 1619.90
Cost of 10 nos wheels
Cost per wheel
Say
852
Unit
Quantity
Rate
Amount
day
day
day
L.S.
0.04
0.03
0.06
1.04
448.00
407.00
368.00
1.73
17.92
12.21
22.08
1.80
each
10.00
65.00
650.00
quintal
0.10
3675.00
367.50
quintal
cm
0.016
120.00
5100.00
2.00
81.60
240.00
day
day
day
0.10
0.05
0.36
487.00
407.00
368.00
48.70
20.35
132.48
sqm
L.S.
0.34
5.33
29.10
1.73
9.89(A)
9.22
1613.75
16.04
1629.79
242.99
1872.78
187.27
187.25
14.23
Code
0011
0114
14.24
Code
0811
0114
0101
9999
14.25
Code
2602
3.18
2201
9999
0123
0124
0115
0101
Pumping out water caused by springs, tidal or river seepage, broken water mains or
drains and the like.
Description
Details for 10.91 kilolitre
Pumping hours 3 hrs. or 0.375 days
Hire charges of Pumpset of capacity
4000 litres/hour.
Beldar
for clearing slush
TOTAL
TOTAL
Cost of 10.91 kilolitre
Cost of 1 kilolitre
Say
Unit
Quantity
day
day
0.375
2.00
Rate
650.00
368.00
Amount
243.75
736.00
979.75
9.80
989.55
148.43
1137.98
104.30
104.30
Mud mortar made with local clay good earth.

Description
Detail of cost for 1 cum
MATERIAL
Mud (dry)
LABOUR
Beldar
Bhisti
Sundries
TOTAL
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
cum
1.08
150.00
162.00
day
day
L.S.
0.63
0.315
6.45
368.00
407.00
1.73
231.84
128.21
11.16
533.21
533.21
533.20
Brick work with common burnt clay bricks of class designation 7.5 in mud mortar
Description
Unit
Details of cost for 1 cum.

MATERIAL
Common burnt clay F.P.S. (non modular)
bricks class designation 7.5
Mud mortar
Carriage of Bricks
Sundries
LABOUR
Coolie
Bhisti
TOTAL
TOTAL
Cost of 1 Cum.
Say
853
Quantity
Rate
Amount
1000 Nos
0.494
4500.00
2223.00
cum
1000 Nos
L.S.
0.25
0.494
2.73
533.20
276.72
1.73
133.30
136.70
4.72
day
day
day
day
0.36
0.36
1.37
0.2
487.00
448.00
368.00
407.00
175.32
161.28
504.16
81.40
3419.88
34.20
3454.08
518.11
3972.19
3972.20
14.26
Providing and fixing 25 mm thick shutters for cup board etc. :
14.26.1
Panelled or panelled & glazed shutters :
14.26.1.1
Superior class teak wood including nickel plated bright finished M.S. piano hinges
with necessary screws.
Code
Description
1186
Details of cost for shutter of cup-board

200x108cm = 2.16 sqm.
MATERIAL
Styles
4x200x8.0x2.5cm = 0.016 cum+
Rails
Top rail
1x110.5x8.0x2.5cm = 0.0022cum+
Lock and bottom rails
2x110.5x8.0x2.5 cm = 0.0044 cum
Panels
2x48x41x1.6cm = 0.006cum+
Sash bars
2x114x3.8x2.5cm = 0.003cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading
16x92x1.4x1.2cm = 0.002cum
Total = 0.0366
Add for wastage @ 10% = 0.0037 cum.
Grand Total = 0.0403 cum = 40.30 cudm
say 40 cudm
Superior class teak wood such as Dandeli,
Balarshah or Malabar in planks
Carriage of Timber
FittingsNickel plated mild steel piono hinges
1 mm thick 25 mm wide
Bright finished or black enamelled mild
steel screws 25 mm
LABOUR
Carpenter 1st class
Glazier
Beldar
Sundries
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
2204
2406
0608
0639
0111
0119
0114
9999
Unit
854
Quantity
Rate
Amount
10 cudm
cum
4.00
0.04
1100.00
118.59
4400.00
4.74
sqm
0.99
286.00
283.14
metre
4.00
40.00
160.00
100 Nos
1.20
37.00
44.40
day
day
day
L.S.
2.40
0.18
0.77
40.43
487.00
448.00
368.00
1.73
1168.80
80.64
283.36
69.94
6495.02
64.95
6559.97
984.00
7543.97
3492.57
3492.55
14.26.1.2
Code
1188
2204
2406
0608
0639
0111
0119
0114
9999
Ist class teak wood including nickel plated bright finished M.S. piano hinges with
necessary screws.
Description
Unit
Details of cost for shutters of a cup-board

(half glazed and half panelled) 200x108cm
= 2.16 sqm.
MATERIAL
Styles
4x200x8.0x2.5cm = 0.016 cum+
Rails
Top rail
1x110.5x8.0x2.5cm = 0.0022cum+
Lock and bottom rail
2x110.5x8.0x2.5cm = 0.0044 cum.
Panels
2x48x41x1.6cm = 0.006cum+
Sash bars
2x114x3.8x2.5cm = 0.003cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading
16x92x1.4x1.2cm = 0.002cum
Total = 0.0366
Grand Total = 0.0403 cum = 40.30 cudm
say 40 cudm
First class teak wood in planks
Carriage of Timber
Fittings
Nickel plated mild steel piono hinges
steel screws 25 mm
LABOUR
Carpenter 1st class
Glazier
Beldar
Sundries
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Quantity
Rate
Amount
10 cudm
cum
4.00
0.04
850.00
118.59
3400.00
4.74
sqm
0.99
286.00
283.14
metre
4.00
40.00
160.00
100 Nos
1.20
37.00
44.40
day
day
day
L.S.
2.40
0.18
0.77
40.43
487.00
448.00
368.00
1.73
1168.80
80.64
283.36
69.94
5495.02
54.95
5549.97
832.50
6382.47
2954.84
2954.85
14.26.2
Glazed shutters :
14.26.2.1
Superior class teak wood including nickel plated bright finished M.S. piano hinges
with necessary screws.
Code
Description
Unit

200x108cm = 2.16 sqm.
855
Quantity
Rate
Amount
Code
1186
2406
0608
0639
0597
0640
2204
0156
0119
0114
9999
14.26.2.2
Code
Description
Unit
MATERIAL
(i) Teak wood first class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
Top & intermediate rails
2x110.5x9.5x2.5 cm = 0.006 cum
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.039 cum.
Grand Total = 0.043 cum = 43 cudm
Superior class teak wood such as Dandeli,
Balarshah or Malabar in planks
75x45x3.2 mm
steel screws 25 mm
steel butt hinges50x37x1.50 mm
steel screws 20 mm
Carriage of Timber
LABOUR
Carpenter (average)
Glazier
Beldar
Sundries
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Quantity
Rate
Amount
10 cudm
4.30
1100.00
4730.00
sqm
1.27
286.00
363.22
metre
4.00
40.00
160.00
100 Nos
1.20
37.00
44.40
10 Nos
0.20
50.00
10.00
100 Nos
cum
0.08
0.043
32.00
118.59
2.56
5.10
day
day
day
L.S.
1.83
0.23
0.77
40.43
467.00
448.00
368.00
1.73
854.61
103.04
283.36
69.94
6626.23
66.26
6692.49
1003.87
7696.36
3563.12
3563.10
Ist class teak wood including nickel plated bright finished M.S. piano hinges with
necessary screws.
Description
Unit

200x108cm = 2.16 sqm.
MATERIAL
(i) Teak wood first class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
Top & intermediate rails
2x110.5x9.5x2.5 cm = 0.006 cum
856
Quantity
Rate
Amount
Code
1188
2406
0608
0639
0597
0640
2204
0156
0119
0114
9999
Description
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.039 cum.
Grand Total = 0.043 cum = 43 cudm
First class teak wood in planks
75x45x3.2 mm
steel screws 25 mm
steel screws 20 mm
Carriage of Timber
LABOUR
Carpenter (average)
Glazier
Beldar
Sundries
TOTAL
TOTAL
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Unit
Quantity
Rate
Amount
10 cudm
4.30
850.00
3655.00
sqm
1.27
286.00
363.22
metre
4.00
40.00
160.00
100 Nos
1.20
37.00
44.40
10 Nos
0.20
50.00
10.00
100 Nos
cum
0.08
0.043
32.00
118.59
2.56
5.10
day
day
day
L.S.
1.83
0.23
0.77
40.43
467.00
448.00
368.00
1.73
854.61
103.04
283.36
69.94
5551.23
55.51
5606.74
841.01
6447.75
2985.06
2985.05
14.27
Providing and fixing plain jaffri door and window shutters including bright or/and
black enamelled M.S. butt hinges with necessary screws 35x10 mm laths placed 35
mm apart (frames to be paid separately), including fixing 50x12 mm beading complete
with :
14.27.1
Second class teak wood
Code
Description
1190
Details of cost of a jaffri shutter 176x86 cm

= 1.51 sqm
MATERIAL
Teak wood 2nd class
Styles 2x176x7.5x3.5 cm = 0.0092 cum
Rails 3x86x7.5x3.5 = 0.0068 cum
Total 0.0160 cum
Add wastage @ 10 % =0.0016 cum
Total = 0.0176 cum Say 18 cudm
Unit
857
10 cudm
Quantity
1.80
Rate
675.00
Amount
1215.00
Code
Description
Unit
Quantity
2204
Carriage of Timber
Palain Jaffri work
Rate as per Item Number 9.41.1 of
SH:Wood and PVC work
steel butt hinges 100x58x1.90 mm
steel screws 40 mm
steel screws 20 mm
LABOUR
For making frame and fixing fitting
Carpenter 2nd class
TOTAL
i.e. on (4050.76 - 2605.43) = 1445.33
TOTAL
- 2605.43) = 1459.78
Cost of 1.51 sqm.
Cost of 1 sqm.
Say
cum
0.018
sqm
1.51
10 Nos
0.60
85.00
51.00
10 Nos
0.20
50.00
10.00
100 Nos
0.48
63.00
30.24
100 Nos
0.08
32.00
2.56
day
0.30
448.00
134.40
4050.76
9.41.1
0595
0597
0637
0640
0112
Rate
118.59
Amount
2.13
1725.45 2605.43(A)
14.45
4065.21
218.97
4284.18
2837.20
2837.20
14.28
Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass
brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.
14.28.1
20 mm diameter.
Code
0444
0446
9999
9977
9.32
9999
9999
Description
Detail of cost for 2 metre long
MATERIAL
Brass curtain rod 20 mm dia 1.25 mm thick
Brass brackets (curtain rods) 20 mm
Screws
Carriage
Wooden plugs including cutting brick work
and fixing in cement mortar
Rate as per item no 9.32 of SH : Wood work
LABOUR
Sundries
TOTAL
i.e. on (388.54 - 43.70) = 344.84
TOTAL
- 43.70) = 348.29
Cost of 2 metres
Cost of 1 metre
Say
858
Unit
Quantity
Rate
Amount
metre
each
L.S.
L.S.
2.00
2.00
2.73
1.56
120.00
45.00
1.73
1.73
240.00
90.00
4.72
2.70
each
L.S.
L.S.
2.00
2.73
1.56
21.85
1.73
1.73
43.70(A)
4.72
2.70
388.54
3.45
391.99
52.24
444.23
222.11
222.10
14.28.2
Code
0445
0446
9999
9977
9.32
9999
9999
14.29
Code
1003
1008
2205
9999
0103
0112
0114
25 mm diameter.
Description
Detail of cost for 2 metre long
MATERIAL
Brass curtain rod 25 mm dia 1.25 mm thick
Brass brackets (curtain rods) 20 mm
Screws
Carriage
Wooden plugs including cutting brick work
and fixing in cement mortar
Rate as per item no 9.32 of SH : Wood work
LABOUR
Sundries
TOTAL
i.e. on (428.54 - 43.70) = 384.84
TOTAL
- 43.70) = 388.69
Cost of 2 metres
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
metre
each
L.S.
L.S.
2.00
2.00
2.73
1.56
140.00
45.00
1.73
1.73
280.00
90.00
4.72
2.70
each
L.S.
L.S.
2.00
2.73
1.56
21.85
1.73
1.73
43.70(A)
4.72
2.70
428.54
3.85
432.39
58.30
490.69
245.34
245.35
Providing and fixing M.S. round or square bars with M.S. flats at required spacing in
wooden frames of windows and clerestory windows.
Description
Unit
Details of cost for window -140x110cm

MATERIAL
M.S. bar 16 mm dia 13x136 cm
= 17.68 m @ 1.58 kg/m = 27.93 kg
Add for wastage @ 10% =2.79 kg
Total = 30.72 kg or 0.307 q
M.S. flat 40x6mm 2x96cm = 192cm+
1x110cm = 110cm
= 302cm+
Add wastage @ 10% = 30cm
Total = 332cm.@ 1.90 kg/m = 6.31 kg
Say 0.063 q
Carriage of Steel
(0.307+0.063 = 0.37 q = 0.037 t)
Sundries
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost of 33.67 kg.(5.74+27.93=33.67kg)
Cost of 1 kg.
Say
859
Quantity
Rate
Amount
quintal
0.307
3575.00
1097.53
quintal
tonne
0.063
0.037
3675.00
92.24
231.53
3.41
L.S.
26.91
1.73
46.55
day
day
day
0.35
0.20
0.45
448.00
448.00
368.00
156.80
89.60
165.60
1791.02
17.91
1808.93
271.34
2080.27
61.78
61.80
14.30
Providing joists (karries) including hoisting, fixing in position and applying wood
preservative on unexposed surface etc. complete with :
14.30.1
Sal wood
Code
1199
2204
0112
0114
0100
13.57.1
9999
14.30.2
Code
2466
2204
0112
0114
0100
13.57.1
Description
Unit
Details of cost for 300cudm.

MATERIAL
Sal wood
10x0.1mx0.1mx3.0m = 0.30 cum. or
= 300 cudm
Add wastage @ 2% = 6.00 cudm.
Total = 306 cudm.
Carriage of Timber
LABOUR
Carpenter 2nd class
Beldar
Bandhani
Priming coat (Wood preservative)
Rate as per item no 13.57.1 SH : Finishing
Sundries
TOTAL
i.e. on (19600.70 - 25.76) = 19574.94
TOTAL
- 25.76) = 19770.69
Cost of 300 cudm.
Cost of 1 cum.
Say
Quantity
Rate
Amount
10 cudm
cum
30.60
0.306
600.00
118.59
18360.00
36.29
day
day
day
0.70
1.45
0.70
448.00
368.00
407.00
313.60
533.60
284.90
sqm
L.S.
0.80
26.91
32.20
1.73
25.76(A)
46.55
19600.70
195.75
19796.45
2965.60
22762.05
75873.50
75873.50
Hollock wood
Description
Unit
Details of cost for 300cudm.

MATERIAL
10x0.1mx0.1mx3.0m = 0.30 cum. or
= 300 cudm
Add wastage @ 2% = 6.00 cudm.
Total = 306 cudm.
Carriage of Timber
LABOUR
Carpenter 2nd class
Beldar
Bandhani
Priming coat (Wood preservative)
Rate as per item no 13.57.1 SH : Finishing
860
Quantity
Rate
Amount
10 cudm
cum
30.60
0.306
340.00
118.59
10404.00
36.29
day
day
day
0.70
1.45
0.70
448.00
368.00
407.00
313.60
533.60
284.90
sqm
0.80
32.20
25.76(A)
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
i.e. on (11644.70 - 25.76) = 11618.94
TOTAL
- 25.76) = 11735.13
Cost of 300 cudm.
Cost of 1 cum.
Say
L.S.
26.91
Rate
1.73
Amount
46.55
11644.70
116.19
11760.89
1760.27
13521.16
45070.53
45070.55
14.31
Providing and fixing bright finished brass single acting spring hinges with necessary
brass screws etc. complete :
14.31.1
150 mm
Code
Description
0389
0449
9977
0111
0114
Details of cost for 10 nos.

MATERIAL
Brass single acting spring hinges 150 mm
Brass screws 50 mm
Carriage of materials
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 10 hinges
Cost of each
Say
14.31.2
125 mm
Code
Description
0390
0449
9977
0111
0114
Unit

MATERIAL
Brass screws 50 mm
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 10 hinges
Cost of each
Say
861
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
0.80
3.64
460.00
220.00
1.73
4600.00
176.00
6.30
day
day
0.40
0.20
487.00
368.00
194.80
73.60
5050.70
50.51
5101.21
765.18
5866.39
586.63
586.65
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
0.80
3.64
298.00
220.00
1.73
2980.00
176.00
6.30
day
day
0.40
0.20
487.00
368.00
194.80
73.60
3430.70
34.31
3465.01
519.75
3984.76
398.47
398.45
14.31.3
100 mm
Code
Description
0391
0450
9977
0111
0114
Unit

MATERIAL
Brass screws 40 mm
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 10 hinges
Cost of each
Say
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
0.80
3.64
260.00
170.00
1.73
2600.00
136.00
6.30
day
day
0.40
0.20
487.00
368.00
194.80
73.60
3010.70
30.11
3040.81
456.12
3496.93
349.69
349.70
14.32
Providing and fixing bright finished brass double acting spring hinges with necessary
brass screws etc. complete :
14.32.1
150 mm
Code
Description
0392
0449
9977
0111
0114
Unit

MATERIAL
Brass double acting spring hinges 150 mm
Brass screws 50 mm
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 10 hinges
Cost of each
Say
14.32.2
125 mm
Code
Description
0393
0449
9977

MATERIAL
Brass screws 50 mm
LABOUR
Carpenter 1st class
0111
862
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
0.80
3.64
498.00
220.00
1.73
4980.00
176.00
6.30
day
day
0.40
0.20
487.00
368.00
194.80
73.60
5430.70
54.31
5485.01
822.75
6307.76
630.77
630.75
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
0.80
3.64
410.00
220.00
1.73
4100.00
176.00
6.30
day
0.40
487.00
194.80
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 10 hinges
Cost of each
Say
day
0.20
Unit
Quantity
14.32.3
100 mm
Code
Description
0394
0450
9977
0111
0114

MATERIAL
Brass screws 40 mm
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 10 hinges
Cost of each
Say
Rate
368.00
Rate
Amount
73.60
4550.70
45.51
4596.21
689.43
5285.64
528.56
528.55
Amount
each
100 Nos
L.S.
10.00
0.80
3.64
370.00
170.00
1.73
3700.00
136.00
6.30
day
day
0.40
0.20
487.00
368.00
194.80
73.60
4110.70
41.11
4151.81
622.77
4774.58
477.45
477.45
14.33
Providing and fixing bright finished brass flush bolts with necessary brass screws
etc. complete :
14.33.1
250 mm
Code
Description
0404
0452
9977
0111
Unit

MATERIAL
Brass flush bolt 250 mm
Brass screws 25 mm
LABOUR
Carpenter 1st class
TOTAL
TOTAL
Cost of 10 hinges
Cost of each
Say
863
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
0.60
3.64
150.00
100.00
1.73
1500.00
60.00
6.30
Day
0.20
487.00
97.40
1663.70
16.64
1680.34
252.05
1932.39
193.23
193.25
14.33.2
150 mm
Code
Description
0405
0452
9977
0111

MATERIAL
Brass screws 25 mm
LABOUR
Carpenter 1st class
TOTAL
TOTAL
Cost of 10 hinges
Cost of each
Say
14.33.3
100 mm
Code
Description
0406
0452
9977
0111
14.34
Unit

MATERIAL
Brass screws 25 mm
LABOUR
Carpenter 1st class
TOTAL
TOTAL
Cost of 10 hinges
Cost of each
Say
Rate
Amount
each
100 Nos
L.S.
10.00
0.60
2.73
130.00
100.00
1.73
1300.00
60.00
4.72
day
0.17
487.00
82.79
1447.51
14.48
1461.99
219.30
1681.29
168.12
168.10
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
0.60
2.73
90.00
100.00
1.73
900.00
60.00
4.72
day
0.17
487.00
82.79
1047.51
10.48
1057.99
158.70
1216.69
121.66
121.65
Providing and fixing 150 mm bright finished floor brass door stopper with rubber
cushion, necessary brass screws etc. to suit shutter thickness complete
Code
Description
0417
0450
9977

MATERIAL
Brass 150 mm floor door stopper (0.357kg)
Brass screws 40 mm
LABOUR
Carpenter 1st class
0111
Quantity
Unit
864
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
0.40
2.73
170.00
170.00
1.73
1700.00
68.00
4.72
day
0.07
487.00
34.09
Code
Description
9999
Sundries (wooden plugs including fixing

in the floor)
TOTAL
TOTAL
Cost of 10 Nos
Cost of each
Say
Unit
Quantity
L.S.
6.37
Rate
1.73
14.35
Providing and fixing bright finished brass hard drawn hooks and eyes :
14.35.1
300 mm
Code
Description
0418
9977
0111

MATERIAL
Brass hard drawn hooks and eyes 300 mm
LABOUR
Carpenter 1st class
TOTAL
TOTAL
Cost of 10 Nos
Cost of each
Say
14.35.2
250 mm
Code
Description
0419
9977
0111
Unit

MATERIAL
LABOUR
Carpenter 1st class
TOTAL
TOTAL
Cost of 10 hooks and eyes
Cost of 1 hook and eye
Say
865
Quantity
Rate
Amount
11.02
1817.83
18.18
1836.01
275.40
2111.41
211.14
211.15
Amount
10 Nos
L.S.
1.00
0.91
650.00
1.73
650.00
1.57
day
0.06
487.00
29.22
680.79
6.81
687.60
103.14
790.74
79.07
79.05
Unit
Quantity
Rate
Amount
10 Nos
L.S.
1.00
0.91
635.00
1.73
635.00
1.57
day
0.06
487.00
29.22
665.79
6.66
672.45
100.87
773.32
77.33
77.35
14.35.3
200 mm
Code
Description
0420
9977
0111

MATERIAL
LABOUR
Carpenter 1st class
TOTAL
TOTAL
Cost of 10 Nos
Cost of each
Say
14.35.4
150 mm
Code
Description
0421
9977
0111

MATERIAL
LABOUR
Carpenter 1st class
TOTAL
TOTAL
Cost of 10 Nos
Cost of each
Say
14.35.5
100 mm
Code
Description
0422
9977
0111
Unit

MATERIAL
LABOUR
Carpenter 1st class
TOTAL
TOTAL
Cost of 10 Nos
Cost of each
Say
866
Quantity
Rate
Amount
10 Nos
L.S.
1.00
0.91
590.00
1.73
590.00
1.57
day
0.06
487.00
29.22
620.79
6.21
627.00
94.05
721.05
72.10
72.10
Unit
Quantity
Rate
Amount
10 Nos
L.S.
1.00
0.91
450.00
1.73
450.00
1.57
day
0.06
487.00
29.22
480.79
4.81
485.60
72.84
558.44
55.84
55.85
Unit
Quantity
Rate
Amount
10 Nos
L.S.
1.00
0.91
400.00
1.73
400.00
1.57
day
0.06
487.00
29.22
430.79
4.31
435.10
65.27
500.37
50.03
50.05
14.36
Code
0429
0450
9977
0111
14.37
Code
0430
0452
9977
0111
14.38
Code
0427
0452
9977
0111
Providing and fixing bright finished brass fan light pivot with necessary brass screws
etc. complete.
Description
Unit

MATERIAL
Brass fanlight pivot
Brass screws 40 mm
LABOUR
Carpenter 1st class
TOTAL
TOTAL
Cost of 10 Nos
Cost of each
Say
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
1.00
0.40
0.91
195.00
170.00
1.73
195.00
68.00
1.57
day
0.08
487.00
38.96
303.53
3.04
306.57
45.99
352.56
35.25
35.25
Providing and fixing 300 mm long bright finished brass chain with hook for fan light
including necessary brass screws etc. complete.
Description
Unit

MATERIAL
Brass chain with hook for fan light catch
Brass screws 25 mm
LABOUR
Carpenter 1st class
TOTAL
TOTAL
Cost of 10 Nos
Cost of each
Say
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
0.40
0.91
40.00
100.00
1.73
400.00
40.00
1.57
day
0.10
487.00
48.70
490.27
4.90
495.17
74.28
569.45
56.94
56.95
Providing and fixing bright finished brass quadrant stay 300 mm long with necessary
brass screws etc. complete.
Description
Unit

MATERIAL
Brass quadrant stays 300 mm
Brass screws 25 mm
LABOUR
Carpenter 1st class
TOTAL
TOTAL
Cost of 10 quadrant stayes
Cost of each
Say
867
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
0.40
0.91
125.00
100.00
1.73
1250.00
40.00
1.57
day
0.10
487.00
48.70
1340.27
13.40
1353.67
203.05
1556.72
155.67
155.65
14.39
Code
0442
0449
0452
9977
0111
0114
Providing and fixing bright finished brass helical door spring (superior quality).
Description
Unit

MATERIAL
Brass helical spring 150 mm
Brass screws 50 mm
Brass screws 25 mm
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 10 Nos
Cost of each
Say
Quantity
Rate
Amount
each
100 Nos
100 Nos
L.S.
10.00
0.40
0.20
3.84
310.00
220.00
100.00
1.73
3100.00
88.00
20.00
6.64
day
day
0.40
0.20
487.00
368.00
194.80
73.60
3483.04
34.83
3517.87
527.68
4045.55
404.55
404.55
14.40
Providing and fixing chromium plated brass butt hinges with necessary chromium
plated brass screws etc. complete.
14.40.1
125x70x4 mm (ordinary type)
Code
0525
0585
9977
0111
0114
14.40.2
Code
0526
0586
9977
0111
Description
Unit

MATERIAL
Chromium plated Brass butt hinges
(light/ordinary) type 125x70x4 mm
Chromium plated Brass screws 50 mm
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 10 nos.
Cost of each
Say
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
1.00
1.00
3.64
900.00
340.00
1.73
900.00
340.00
6.30
day
day
0.14
0.10
487.00
368.00
68.18
36.80
1351.28
13.51
1364.79
204.72
1569.51
156.95
156.95
Unit
Quantity
100x70x4 mm (ordinary type)

Description
MATERIAL
(light/ordinary) type 100x70x4 mm
LABOUR
Carpenter 1st class
868
Rate
Amount
10 Nos
100 Nos
L.S.
1.00
0.80
3.64
750.00
310.00
1.73
750.00
248.00
6.30
day
0.14
487.00
68.18
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 10 nos.
Cost of each
Say
day
0.10
Unit
Quantity
14.40.3
Code
0524
0587
9977
0111
0114
14.40.4
Code
0527
0587
9977
0111
0114
Rate
368.00
Amount
36.80
1109.28
11.09
1120.37
168.06
1288.43
128.84
128.85
75x65x4 mm (heavy type)

Description
MATERIAL
Chromium plated Brass butt hinges (heavy)
type 75x65x4 .0 mm (200gms)
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 10 nos.
Cost of each
Say
Rate
Amount
10 Nos
100 Nos
L.S.
1.00
0.60
1.82
1000.00
250.00
1.73
1000.00
150.00
3.15
day
day
0.14
0.10
487.00
368.00
68.18
36.80
1258.13
12.58
1270.71
190.61
1461.32
146.13
146.15
Unit
Quantity
75x40x2.5 mm (ordinary type)

Description
MATERIAL
(light/ordinary) type 75x40x2.5 mm
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 10 nos.
Cost of each
Say
869
Rate
Amount
10 Nos
100 Nos
L.S.
1.00
0.60
1.82
460.00
250.00
1.73
460.00
150.00
3.15
day
day
0.14
0.10
487.00
368.00
68.18
36.80
718.13
7.18
725.31
108.80
834.11
83.41
83.40
14.40.5
Code
0528
0589
9977
0111
14.41
Code
2467
9988
0112
50x40x2.5 mm (ordinary type)

Description
Unit

MATERIAL
(light/ordinary) type 50x40x2.5 mm
LABOUR
Carpenter 1st class
TOTAL
TOTAL
Cost of 10 nos.
Cost of each
Say
200.00
170.00
1.73
200.00
68.00
1.57
day
0.08
487.00
38.96
308.53
3.09
311.62
46.74
358.36
35.83
35.85
Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary
chromium plated brass screws, nuts, bolts and washers etc. complete.
Description
Details of cost for 10 Nos
MATERIAL
Chromium plated Brass pull bolt lock
(locking bolt) of size 85 mmx42 mm with
screws,bolts,nuts and washers complete
Carriage of materials & sundries
LABOUR
Carpenter 2nd class
TOTAL
TOTAL
Cost of 10 nos.
Cost of each
Say
Unit
Quantity
each
L.S.
10.00
6.37
165.00
1.73
1650.00
11.02
day
0.25
448.00
112.00
1773.02
17.73
1790.75
268.61
2059.36
205.93
205.95
14.42.1
Old work (two or more coats)
0141
0115
9999
Amount
1.00
0.40
0.91
White washing with lime to give an even shade :
0775
9977
Rate
10 Nos
100 Nos
L.S.
14.42
Code
Quantity
Description
Unit

MATERIAL
Dehradun white lime
Carriage of lime
LABOUR
White Washer
Coolie
Indigo gum etc
870
Quantity
Rate
Rate
Amount
Amount
quintal
L.S.
0.02
0.52
550.00
1.73
11.00
0.90
day
day
L.S.
0.11
0.06
2.73
407.00
368.00
1.73
44.77
22.08
4.72
Code
Description
Unit
Quantity
9999

TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
2.73
Unit
Quantity
14.42.2
Code
0775
9977
0141
0115
9999
9999
14.43
Code
0114
0115
0101
9999
9999
Rate
1.73
Amount
4.72
88.19
0.88
89.07
13.36
102.43
10.24
10.25
Old work (one or more coats)

Description
MATERIAL
Dehradun white lime
Carriage of lime
LABOUR
White Washer
Coolie
Indigo gum etc
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
Amount
quintal
L.S.
0.01
0.52
550.00
1.73
5.50
0.90
day
day
L.S.
L.S.
0.07
0.03
2.08
2.73
407.00
368.00
1.73
1.73
28.49
11.04
3.60
4.72
54.25
0.54
54.79
8.22
63.01
6.30
6.30
Removing white or colour wash by scrapping and sand papering and preparing the
surface smooth including necessary repairs to scratches etc. complete
Description
Details of cost for 10 sqm.
LABOUR
Beldar
Coolie
Bhisti
Sundries such as sand paper and scrapper
Repair to scraches
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
871
Unit
Quantity
day
day
day
L.S.
L.S.
0.09
0.04
0.04
2.73
1.82
Rate
368.00
368.00
407.00
1.73
1.73
Amount
33.12
14.72
16.28
4.72
3.15
71.99
0.72
72.71
10.91
83.62
8.36
8.35
14.44
Code
0815
9977
9999
0131
0115
9999
Distempering with dry distemper of approved brand and manufacture (one or more
coats) and of required shade on old work to give an even shade.
Description
Unit

MATERIAL
Dry distemper
Carriage of distemper
Brushes, sand-paper etc.
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
Quantity
Rate
Amount
kilogram
L.S.
L.S.
1.00
0.91
5.33
30.00
1.73
1.73
30.00
1.57
9.22
day
day
L.S.
0.33
0.17
4.42
448.00
368.00
1.73
147.84
62.56
7.65
258.84
2.59
261.43
39.21
300.64
30.06
30.05
14.45
Distempering with oil bound washable distemper of approved brand and manufacture
14.45.1
Code
0816
9999
9988
0131
0115
9999
14.46
Description
Unit

MATERIAL
distemper
Brushes, putty etc.
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
Quantity
Rate
Amount
kilogram
L.S.
L.S.
1.00
0.52
10.79
45.00
1.73
1.73
45.00
0.90
18.67
day
day
L.S.
0.33
0.17
7.15
448.00
368.00
1.73
147.84
62.56
12.37
287.34
2.87
290.21
43.53
333.74
33.37
33.35
Removing dry or oil bound distemper, water proofing cement paint and the like by
scrapping, sand papering and preparing the surface smooth including necessary
repairs to scratches etc. complete.
Code
Description
Unit
Quantity
0114
0115

LABOUR
Beldar
Coolie
day
day
0.11
0.05
872
Rate
368.00
368.00
Amount
40.48
18.40
Code
Description
Unit
Quantity
Rate
Amount
0101
9999
9999
Bhisti
Scrapper, sand paper etc.
Sundries including mortar to repair the
surface
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
day
L.S.
0.05
6.24
407.00
1.73
20.35
10.80
L.S.
1.82
1.73
3.15
93.18
0.93
94.11
14.12
108.23
10.82
10.80
14.47
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture
of required colour to give an even shade :
14.47.1
Code
0845
9977
0131
0115
9999
9999
Description
MATERIAL
Roofing paint for iron sheets in red colour
Carriage
LABOUR
Painter
Coolie
Putty, brushes sand paper etc.
Sundries
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm.
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.46
0.52
120.00
1.73
55.20
0.90
day
day
L.S.
L.S.
0.36
0.36
6.76
8.06
448.00
368.00
1.73
1.73
161.28
132.48
11.69
13.94
375.49
3.75
379.24
56.89
436.13
43.61
43.60
14.48
Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with
black anticorrosive bitumastic paint of approved brand and manufacture over and
including a priming coat of ready mixed zinc chromate yellow primer on new work :
14.48.1
Code
4202
9977
0131
0115
9999
Description
Detail of cost for 30 metres
Area=22/7 x0.0814m x30m =7.67 sqm
MATERIAL
Carraige
LABOUR
Painter
Coolie
873
Unit
Quantity
Rate
Amount
litre
L.S.
0.41
0.39
65.00
1.73
26.65
0.67
day
day
L.S.
0.18
0.18
8.19
448.00
368.00
1.73
80.64
66.24
14.17
Code
0828
9977
0131
0115
9999
9999
9999
9999
Description
MATERIAL
Carraige
LABOUR
Painter
Coolie
Sundries
Extra for delays
TOTAL
TOTAL
Cost of 1.00 metre
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.73
1.04
100.00
1.73
73.00
1.80
day
day
L.S.
L.S.
L.S.
L.S.
0.41
0.41
4.16
6.24
4.42
40.3
448.00
368.00
1.73
1.73
1.73
1.73
183.68
150.88
7.20
10.80
7.65
69.72
693.10
6.93
700.03
105.00
805.03
26.83
26.85
14.49
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with
black anticorrosive bitumastic paint of approved brand and manufacture on old work :
14.49.1
Code
0828
9977
0131
0115
9999
9999
9999
9999
14.49.2
Description
Area=22/7 x0.0814m x30m =7.67 sqm
MATERIAL
Carriage
LABOUR
Painter
Coolie
Sundries
Extra for delays
TOTAL
TOTAL
Cost of 1.00 metre
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.43
0.39
100.00
1.73
43.00
0.67
day
day
L.S.
L.S.
L.S.
L.S.
0.27
0.27
4.16
6.24
4.42
26.91
448.00
368.00
1.73
1.73
1.73
1.73
120.96
99.36
7.20
10.80
7.65
46.55
336.19
3.36
339.55
50.93
390.48
13.01
13.00
Code
Description
Unit
Quantity
0828
9977
Details of cost for 30 metres

Area = 22/7x106.4 mmx30 m = 10.032 sqm
MATERIAL
Carriage
litre
L.S.
0.57
0.52
874
Rate
100.00
1.73
Amount
57.00
0.90
Code
0131
0115
9999
9999
9999
9999
14.49.3
Code
0828
9977
0131
0115
9999
9999
9999
9999
Description
LABOUR
Painter
Coolie
Putty, sand paper brushes etc.
Sundries
Extra for delay
TOTAL
TOTAL
Cost of 1.00 metre
Say
Unit
Quantity
Rate
day
day
L.S.
L.S.
L.S.
L.S.
0.36
0.36
5.33
8.06
5.33
34.06
Unit
Quantity
litre
L.S.
0.85
0.65
100.00
1.73
85.00
1.12
day
day
L.S.
L.S.
L.S.
L.S.
0.53
0.53
8.06
11.96
7.14
40.30
448.00
368.00
1.73
1.73
1.73
1.73
237.44
195.04
13.94
20.69
12.35
69.72
635.30
6.35
641.65
96.25
737.90
24.59
24.60
448.00
368.00
1.73
1.73
1.73
1.73
Amount
161.28
132.48
9.22
13.94
9.22
58.92
442.96
4.43
447.39
67.11
514.50
17.15
17.15

Description
Area = 22/7x157.2 mmx30 m = 14.82 sqm
MATERIAL
Carriage
LABOUR
Painter
Coolie
Sundries
Extra for delay
TOTAL
TOTAL
Cost of 1.00 metre
Say
Rate
Amount
14.50
Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with
aluminium paint of approved brand and manufacture over a priming coat of ready
mixed zinc chromate yellow primer on new work :
14.50.1
Code
4202
9977
0131
0115
9999
Description
Area=22/7 x0.0814m x30m =7.67 sqm
MATERIAL
Carriage
LABOUR
Painter
Coolie
Sundries
875
Unit
Quantity
Rate
Amount
litre
L.S.
0.41
0.39
65.00
1.73
26.65
0.67
day
day
L.S.
0.18
0.18
8.19
448.00
368.00
1.73
80.64
66.24
14.17
Code
0826
9977
9999
0131
0115
9999
9999
9999
14.50.2
Code
4202
9977
0131
0115
9999
0826
9977
9999
0131
0115
9999
9999
9999
Description
MATERIAL
Aluminium paint
Carriage
LABOUR
Painter
Coolie
Sundries
Extra for delays
TOTAL
TOTAL
Cost of 1.00 metre
Say
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
0.61
1.04
4.16
130.00
1.73
1.73
79.30
1.80
7.20
day
day
L.S.
L.S.
L.S.
0.41
0.41
5.20
9.10
44.85
448.00
368.00
1.73
1.73
1.73
183.68
150.88
9.00
15.74
77.59
713.56
7.14
720.70
108.11
828.81
27.62
27.60
Unit
Quantity
litre
L.S.
0.54
0.52
65.00
1.73
35.10
0.90
day
0.24
448.00
107.52
day
L.S.
0.24
10.79
368.00
1.73
88.32
18.67
litre
1.16
130.00
150.80
L.S.
L.S.
1.43
5.33
1.73
1.73
2.47
9.22
day
0.54
448.00
241.92
day
L.S.
L.S.
L.S.
0.54
6.76
11.96
66.43
368.00
1.73
1.73
1.73
198.72
11.69
20.69
114.92
1000.94
10.01
1010.95
151.64
1162.59
38.75
38.75

Description
Area=22/7 x106.4x30m =10.032sqm
MATERIAL
Carriage
LABOUR
Painter
0.18 x 10.032 / 7.67 = 0.24
Coolie
Sundries
MATERIAL
Aluminium paint
0.61 x 10.032 / 7.67 = 0.80
Carriage
LABOUR
Painter
0.41 x 10.032 / 7.67 = 0.54
Coolie
Sundries
Extra for delays
TOTAL
TOTAL
Cost of 1.00 metre
Say
876
Rate
Amount
14.50.3
Code
4202
9977
0131
0115
9999
0826
9977
9999
0131
0115
9999
9999
9999

Description
Area=22/7 x157.12x30m =14.82 sqm
MATERIAL
Carriage
LABOUR
Painter
0.18 x 14.82 / 7.67 = 0.36
Coolie
Sundries
MATERIAL
Aluminium paint
0.61 x 14.82 / 7.67 = 1.72
Carriage
LABOUR
Painter
0.41 x 14.82 / 7.67 = 0.80
Coolie
Sundries
Extra for delays
TOTAL
TOTAL
Cost of 1.00 metre
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.80
0.65
65.00
1.73
52.00
1.12
Day
0.36
448.00
161.28
Day
L.S.
0.36
15.99
368.00
1.73
132.48
27.66
litre
1.72
130.00
223.60
L.S.
L.S.
2.08
7.93
1.73
1.73
3.60
13.72
day
0.80
448.00
358.40
day
L.S.
L.S.
L.S.
0.80
10.01
17.81
101.4
368.00
1.73
1.73
1.73
294.40
17.32
30.81
175.42
1491.81
14.92
1506.73
226.01
1732.74
57.75
57.75
14.51
Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with
synthetic enamel paint of approved brand and manufacture and required colour on old
work :
14.51.1
Code
0826
9999
9977
0131
0115
9999
9999
9999
Description
Area = 22/7x0.0814 mmx30 m = 7.67 sqm
MATERIAL
Aluminium paint
Putty, sand paper etc.
Carriage
LABOUR
Painter
Coolie
Sundries
877
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
0.35
0.39
2.08
130.00
1.73
1.73
45.50
0.67
3.60
day
day
L.S.
L.S.
L.S.
0.28
0.28
4.16
6.24
4.42
448.00
368.00
1.73
1.73
1.73
125.44
103.04
7.20
10.80
7.65
Code
Description
Unit
Quantity
9999
Extra for delay

TOTAL
TOTAL
Cost of 1.00 metre
Say
L.S.
26.91
Unit
Quantity
litre
L.S.
L.S.
0.46
0.52
2.73
130.00
1.73
1.73
59.80
0.90
4.72
day
day
L.S.
L.S.
L.S.
L.S.
0.36
0.36
5.33
8.06
5.33
34.06
448.00
368.00
1.73
1.73
1.73
1.73
161.28
132.48
9.22
13.94
9.22
58.92
450.48
4.50
454.98
68.25
523.23
17.44
17.45
Unit
Quantity
litre
L.S.
L.S.
0.68
0.65
3.90
130.00
1.73
1.73
88.40
1.12
6.75
day
day
L.S.
L.S.
L.S.
0.53
0.53
7.93
11.96
7.15
448.00
368.00
1.73
1.73
1.73
237.44
195.04
13.72
20.69
12.37
14.51.2
Code
0826
9999
9977
0131
0115
9999
9999
9999
9999
14.51.3
Code
0826
9999
9977
0131
0115
9999
9999
9999
Rate
1.73
Amount
46.55
350.45
3.50
353.95
53.09
407.04
13.56
13.55

Description
Area = 22/7x106.4 mmx30 m = 10.032 sqm
MATERIAL
Aluminium paint
Carriage
LABOUR
Painter
Coolie
Sundries
Extra for delay
TOTAL
TOTAL
Cost of 1.00 metre
Say
Rate
Amount

Description
Area = 22/7x157.2 mmx30 m = 14.82 sqm
MATERIAL
Aluminium paint
Carriage
LABOUR
Painter
Coolie
Sundries
878
Rate
Amount
Code
Description
Unit
Quantity
9999
Extra for delay

TOTAL
TOTAL
Cost of 1.00 metre
Say
L.S.
40.30
Rate
Amount
1.73
69.72
645.25
6.45
651.70
97.76
749.46
24.98
25.00
14.52
Painting with oil type wood preservative of approved brand and manufacture:
14.52.1
Code
0859
9977
0131
0115
9999
9999
Description
MATERIAL
LABOUR
Painter
Coolie
Brushes etc
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.81
0.52
140.00
1.73
113.40
0.90
day
day
L.S.
L.S.
0.11
0.11
2.73
2.73
448.00
368.00
1.73
1.73
49.28
40.48
4.72
4.72
213.50
2.14
215.64
32.35
247.99
24.79
24.80
14.53
Wall painting with plastic emulsion paint of approved brand and manufacture to give
an even shade:
14.53.1
One or more coats on old work
Code
0835
9999
9977
0131
0115
9999
Description
MATERIAL
Plastic emulsion paint
Material for filling holes and cracks
(putty etc.)
LABOUR
Painter
Coolie
879
Unit
Quantity
Rate
Amount
litre
0.73
200.00
146.00
L.S.
L.S.
0.52
5.33
1.73
1.73
0.90
9.22
day
day
L.S.
0.36
0.36
8.06
448.00
368.00
1.73
161.28
132.48
13.94
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
6.76
Rate
1.73
Amount
11.69
475.51
4.76
480.27
72.04
552.31
55.23
55.25
14.54
Painting with synthetic enamel paint of approved brand and manufacture of required
colour to give an even shade :
14.54.1
Code
0833
9977
0131
0115
9999
9999
9999
Description
MATERIAL
chocolate shade
Carriage of paint and materials
LABOUR
Painter
Coolie
Putty
Brushes sand paper etc.
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.70
0.52
170.00
1.73
119.00
0.90
day
day
L.S.
L.S.
L.S.
0.36
0.36
2.73
5.33
8.06
448.00
368.00
1.73
1.73
1.73
161.28
132.48
4.72
9.22
13.94
441.54
4.42
445.96
66.89
512.85
51.28
51.30
14.55
Painting with aluminium paint of approved brand and manufacture to give an even
shade:
14.55.1
Code
0826
9977
9999
0131
0115
9999
Description
MATERIAL
Aluminium paint
Putty etc
LABOUR
Painter
Coolie
880
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
0.46
0.52
2.73
130.00
1.73
1.73
59.80
0.90
4.72
day
day
L.S.
0.36
0.36
5.33
448.00
368.00
1.73
161.28
132.48
9.22
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
8.06
Rate
1.73
Amount
13.94
382.34
3.82
386.16
57.92
444.08
44.40
44.40
14.56
Painting with acid proof paint of approved brand and manufacture of required colour
14.56.1
Code
0827
9977
9999
0131
0115
9999
9999
Description
MATERIAL
Acid proof paint (chocolate or black)
Carriage of paint
Putty etc
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
0.70
0.52
2.73
225.00
1.73
1.73
157.50
0.90
4.72
day
day
L.S.
L.S.
0.36
0.36
5.33
8.06
448.00
368.00
1.73
1.73
161.28
132.48
9.22
13.94
480.04
4.80
484.84
72.73
557.57
55.75
55.75
14.57
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture
14.57.1
Code
0828
9977
0131
0115
9999
Description
MATERIAL
Carriage
LABOUR
Painter
Coolie
881
Unit
Quantity
Rate
Amount
litre
L.S.
0.57
0.52
100.00
1.73
57.00
0.90
day
day
L.S.
0.36
0.36
5.33
448.00
368.00
1.73
161.28
132.48
9.22
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
8.06
Unit
Quantity
14.58
French spirit polishing :
14.58.1
Code
1000
0999
9977
9999
9999
0131
9999
Description
MATERIAL
Spirit
Shellac
Turpentine oil sand paper cotton/woolen
cloth putty etc.
Linseed oil
LABOUR
Painter
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
1.73
Rate
Amount
13.94
374.82
3.75
378.57
56.79
435.36
43.53
43.55
Amount
litre
kilogram
L.S.
0.98
0.13
0.91
50.00
300.00
1.73
49.00
39.00
1.57
L.S.
L.S.
10.79
0.52
1.73
1.73
18.67
0.90
day
L.S.
1.76
8.06
448.00
1.73
788.48
13.94
911.56
9.12
920.68
138.10
1058.78
105.87
105.85
14.59
Polishing on wood work with ready made wax polish of approved brand and
manufacture :
14.59.1
Old work
Code
0855
9977
0131
0115
9999
Description
Unit

MATERIAL
Caariage
LABOUR
Painter
Coolie
Soap, brushes, cloth etc
882
Quantity
Rate
Amount
kilogram
L.S.
0.25
0.39
250.00
1.73
62.50
0.67
day
day
L.S.
0.40
0.40
4.16
448.00
368.00
1.73
179.20
147.20
7.20
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
4.42
14.60
Code
0829
9977
0131
0115
9999
9999
14.61
Code
0829
9977
9999
0131
0115
9999
9999
Rate
1.73
Amount
7.65
404.42
4.04
408.46
61.27
469.73
46.97
46.95
Re-lettering with black Japan paint of approved brand and manufacture.

Description
Detail of cost for 100 letters of 15 cm height
MATERIAL
Black Japan paint
Carriage
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost per letter per cm height
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.37
0.52
90.00
1.73
33.30
0.90
day
day
L.S.
L.S.
4.00
1.00
7.15
8.06
448.00
368.00
1.73
1.73
1792.00
368.00
12.37
13.94
2220.51
22.21
2242.72
336.41
2579.13
1.71
1.70
Painting (one or more coats) with black Japan paint of approved brand and manufacture
to give an even shade.
Description
MATERIAL
Black Japan paint
Carriage
Putty etc.
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1sqm
Say
883
Unit
Quantity
Rate
Amount
litre
L.S.
L.S.
0.70
0.52
2.73
90.00
1.73
1.73
63.00
0.90
4.72
day
day
L.S.
L.S.
0.36
0.36
5.33
8.06
448.00
368.00
1.73
1.73
161.28
132.48
9.22
13.94
385.54
3.86
389.40
58.41
447.81
44.78
44.80
14.62
Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin:
14.62.1
32 mm dia
Code
1314
9988
14.62.2
Code
1315
9988
Description
Detail of cost for 1 no.
MATERIAL
C.P.brass chain with 32 mm dia rubber plug
Carriage of materials and fixing charges
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
8.06
Unit
Quantity
each
L.S.
1.00
8.06
Rate
40.00
1.73
Amount
40.00
13.94
53.94
0.54
54.48
8.17
62.65
62.65
40 mm dia
Description
Detail of cost for 1 no.
MATERIAL
TOTAL
TOTAL
Cost of each
Say
Rate
40.00
1.73
Amount
40.00
13.94
53.94
0.54
54.48
8.17
62.65
62.65
14.63
Distempering with 1st quality acrylic washable distemper (ready made) of approved
manufacturer and of required shade and colour complete. as per manufacturer's
specification.
14.63.1
Code
0816
9999
9988
0131
0114
9999
Description
Unit

MATERIAL
distemper
Brushes, putty etc
Sundries including carriage of material
LABOUR
Painter
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
884
Quantity
Rate
Amount
kilogram
L.S.
L.S.
1.00
0.52
10.76
45.00
1.73
1.73
45.00
0.90
18.61
day
day
L.S.
0.22
0.22
7.15
448.00
368.00
1.73
98.56
80.96
12.37
256.40
2.56
258.96
38.84
297.80
29.78
29.80
14.64
Finishing walls with water proofing cement paint of required shade :
14.64.1
Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer
applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.
Code
0851
8508
9977
0131
0115
0101
9999
9999
14.64.2
Code
0851
9977
0131
0115
0101
9999
9999
Description
Unit

MATERIAL
Primer for cement paint
LABOUR
Painter
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
kilogram
litre
L.S.
2.20
0.80
1.56
38.00
70.00
1.73
83.60
56.00
2.70
day
day
day
L.S.
L.S.
0.46
0.23
0.05
7.15
8.06
448.00
368.00
407.00
1.73
1.73
206.08
84.64
20.35
12.37
13.94
479.68
4.80
484.48
72.67
557.15
55.71
55.70
Old work (one or more coats @ 2.20 kg/10 sqm) complete.

Description
Unit

MATERIAL
LABOUR
Painter
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Quantity
Rate
Amount
kilogram
L.S.
2.20
1.10
38.00
1.73
83.60
1.90
day
day
day
L.S.
L.S.
0.35
0.12
0.05
3.15
8.06
448.00
368.00
407.00
1.73
1.73
156.80
44.16
20.35
5.45
13.94
326.20
3.26
329.46
49.42
378.88
37.88
37.90
14.65
Finishing walls with textured exterior paint of required shade :
14.65.1
Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10
sqm.
Code
Description
Unit
Quantity
8507

MATERIAL
litre
3.28
885
Rate
230.00
Amount
754.40
Code
Description
Unit
Quantity
9977
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
1.56
1.73
2.70
day
day
L.S.
L.S.
0.46
0.23
7.15
8.06
448.00
368.00
1.73
1.73
206.08
84.64
12.37
13.94
1074.13
10.74
1084.87
162.73
1247.60
124.76
124.75
0131
0115
9999
9999
14.65.2
Code
8507
9977
0131
0115
9999
9999
Rate
Amount
Old work (One or more coats) applied @ 1.82 ltr/10 sqm.

Description
MATERIAL
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
1.82
0.52
230.00
1.73
418.60
0.90
day
day
L.S.
L.S.
0.33
0.17
7.15
8.06
448.00
368.00
1.73
1.73
147.84
62.56
12.37
13.94
656.21
6.56
662.77
99.42
762.19
76.21
76.20
14.66
Finishing walls with Acrylic Smooth exterior paint of required shade :
14.66.1
Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint
surface
Code
8505
9977
0131
0115
9999
Description
MATERIAL
LABOUR
Painter
Coolie
886
Unit
Quantity
Rate
Amount
litre
L.S.
1.67
0.91
170.00
1.73
283.90
1.57
day
day
L.S.
0.46
0.23
4.81
448.00
368.00
1.73
206.08
84.64
8.32
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
5.33
14.66.2
Code
8505
9977
0131
0115
9999
9999
Rate
1.73
Amount
9.22
593.73
5.94
599.67
89.95
689.62
68.96
68.95
Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Description
MATERIAL
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.90
0.52
170.00
1.73
153.00
0.90
day
day
L.S.
L.S.
0.33
0.17
7.15
8.06
448.00
368.00
1.73
1.73
147.84
62.56
12.37
13.94
390.61
3.91
394.52
59.18
453.70
45.37
45.35
14.67
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of
required shade
14.67.1
Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint
surface
Code
8506
9977
0131
0115
9999
9999
Description
MATERIAL
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
887
Unit
Quantity
Rate
Amount
litre
L.S.
1.43
1.04
203.00
1.73
290.29
1.80
day
day
L.S.
L.S.
0.46
0.23
7.15
8.06
448.00
368.00
1.73
1.73
206.08
84.64
12.37
13.94
609.12
6.09
615.21
92.28
707.49
70.74
70.75
14.67.2
Code
8506
9977
0131
0115
9999
9999
Old work (one or more coats applied @ 0.83 ltr/10 sqm).

Description
MATERIAL
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
litre
L.S.
0.83
0.91
203.00
1.73
168.49
1.57
day
day
L.S.
L.S.
0.33
0.17
7.15
8.06
448.00
368.00
1.73
1.73
147.84
62.56
12.37
13.94
406.77
4.07
410.84
61.63
472.47
47.24
47.25
14.69
Varnishing with varnish of approved brand and manufacture:
14.69.1
One or more coats with copal varnish
Code
0857
9977
9999
0131
0115
9999
9999
14.69.2
Description
MATERIAL
Superior copal varnish
Carriage
Repair to the surface
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
Rate
Amount
Unit
Quantity
Amount
litre
L.S.
L.S.
0.70
0.52
2.73
130.00
1.73
1.73
91.00
0.90
4.72
day
day
L.S.
L.S.
0.36
0.36
5.33
2.73
448.00
368.00
1.73
1.73
161.28
132.48
9.22
4.72
404.32
4.04
408.36
61.25
469.61
46.96
46.95
One or more coats with spar varnish
Code
Description
Unit
Quantity
0858
9977
9999

MATERIAL
Superior spar varnish
Carriage
Repair etc
litre
L.S.
L.S.
0.75
0.52
2.73
888
Rate
130.00
1.73
1.73
Amount
97.50
0.90
4.72
Code
0131
0115
9999
9999
14.70
Code
7241
0006
9988
0131
0114
9999
14.71
Description
LABOUR
Painter
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
L.S.
L.S.
0.36
0.36
2.73
4.16
Rate
448.00
368.00
1.73
1.73
Amount
161.28
132.48
4.72
7.20
408.80
4.09
412.89
61.93
474.82
47.48
47.50
Melamine polishing on wood work (one or more coat).

Description
MATERIAL
Melamine polish
Hire charges of Spraying machine including
electric charges
Carriage charge of Machine & Marerial
LABOUR
Painter
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
0.65
290.00
188.50
day
L.S.
0.78
4.42
250.00
1.73
195.00
7.65
day
day
L.S.
0.35
0.35
4.42
448.00
368.00
1.73
156.80
128.80
7.65
684.40
6.84
691.24
103.69
794.93
79.49
79.50
Varnishing with flatting varnish of approved brand and manufacture one or more coats
on old work.
Code
Description
Unit
Quantity
0856
9999
9977
9999

MATERIAL
Ordinary varnish
Glue, putty etc
Carriage
LABOUR
Painter
litre
L.S.
L.S.
L.S.
0.70
2.73
1.82
24.18
90.00
1.73
1.73
1.73
63.00
4.72
3.15
41.83
day
0.36
448.00
161.28
0131
889
Rate
Amount
Code
Description
Unit
Quantity
0115
Coolie
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
day
0.36
14.72
Code
14.72X
2205
0116
0114
9999
Rate
368.00
Amount
132.48
406.46
4.06
410.52
61.58
472.10
47.21
47.20
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up
to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal
& vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.
clamps and M.S. staircase system in the scaffolding for working platform etc. and
maintaining it in a serviceable condition for the required duration as approved and
removing it there after .The scaffolding system shall be stiffened with bracings, runners,
connection with the building etc wherever required for inspection of work at required
locations with essential safety features for the workmen etc. complete as per directions
and approval of Engineer-in-charge .The elevational area of the scaffolding shall be
measured for payment purpose .The payment will be made once irrespective of duration
of scaffolding. Note: - This item to be used for maintenance work judicially, necessary
deduction for scaffolding in the existing item to be done.
Description
Details of cost for area 22.5m x 9.0m =
202.5 sqm
Rate as per Item No.14.72X of SH:Repairs
to Buildings
Carriage of Steel
40mm dia MS pipe = 3765.42 kg
25mm spigot = 123.98 kg
Nuts & bolts = 37.80 kg
Clamp = 120 nos @ 1.00kg each = 120.00 kg
Challies = 90 nos @ 15.00kg each
= 1350.00 kg
Cup locks = 1314 nos @ 0.50kg each
= 657.00 kg
Total = 6054.20 kg = 6.054 tonne
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of 202.50 sqm.
Cost of 1 sqm.
Say
890
Unit
Quantity
Rate
Amount
each
tonne
1.00
6.054
6613.30
92.24
6613.30
558.41
day
day
L.S.
15.50
31.00
1035
487.00
368.00
1.73
7548.50
11408.00
1790.55
27918.76
279.19
28197.95
4229.69
32427.64
160.13
160.15
14.72X
Code
7397
4009
7387
1034
7346
7398
7399
Scaffolding
Description
Details of cost for area 22.5 x 9.0
= 202.50 sqm
MATERIAL
Assuming shuttering material will become
unserviceable after use of 40 times
Base jack
7x2=14 nos
Mild steel tubes hot finished welded type
40mm dia M.S. Tube
Vertical standard 2.5m length
= 7x2x9x2.5 = 315.00 m
Bracing ledder 1.5m length = 7x2x9x4.0873
= 513.00 m
Side support 6.00m length = 3x2x6.00
= 36.00 m
Horizontal support 3.00m length
= 18x3x3.00 = 162.00 m
Total = 1026.00m @ 3.67 kg/m = 3765.42 kg
Spigot for standard jointing
7x2x9 = 126 nos x 0.40m length = 50.40m
50.40m @ 2.46kg/m = 123.98kg
2x7x2x9 = 252 nos @ 0.15 kg each
= 37.80 kg = 0.378 q
Double coupler
2x3x2 + 2x18x3 = 120 nos
Challies
3 nos x 18 lines = 54 nos
Two level plate challies = 2x 18 lines
= 36 nos, Total = 90 nos
Cup lock
Vertical standards 5x7x2x9 = 630.00 Nos.
2x18x19 = 684 Nos.
Total =1314 Nos.
TOTAL
Add 10% for maintenance on P
Less 25% salvage value on P
TOTAL (P+Q+R)
Considering that scaffolding shall be
unserviceable after using 40 times, cost of
using once
Say
891
Unit
Quantity
Rate
Amount
each
14.00
150.00
2100.00
kilogram
3765.42
42.00
158147.64
kg
123.98
45.00
5579.10
quintal
0.378
5100.00
1927.80
each
120.00
48.00
5760.00
each
90.00
800.00
72000.00
each
1314.00
50.00
65700.00
311214.54(P)
31121.45(Q)
-77803.64(R)
264532.35
6613.30
6613.30
14.73
Code
0423
9999
9977
14.74
Code
0428
9999
9977
14.75
Code
0772
9977
0155
0114
0115
Providing and fixing bright finished brass casement window fasteners or peg stays to
windows/ ventilators with necessary welding and machine screws etc. complete.
Description
Details of cost for 10 nos (10 x 0.20 = 2.00 kg)
MATERIAL
Brass casement window fastener
Fixing charges including welding and
materials etc.
TOTAL
TOTAL
Cost of 2.00kg window fasteners
Cost of 1 kg window fastener
Say
Unit
Quantity
Rate
Amount
each
10.00
50.00
500.00
L.S.
L.S.
125.58
3.64
1.73
1.73
217.25
6.30
723.55
7.24
730.79
109.62
840.41
420.20
420.20
Providing and fixing 14 mm bright finished brass spring catch to steel centre hung
ventilators with necessary welding and machine screws etc. complete.
Description
Unit
Details of cost for 10 nos

MATERIAL
Brass fanlight catch
Fixing charges including welding and
materials etc.
TOTAL
TOTAL
Cost of 10 window fasteners
Cost of each
Say
10 Nos
L.S.
L.S.
Quantity
Rate
Amount
1.00
200.00
200.00
125.58
3.64
1.73
1.73
217.25
6.30
423.55
4.24
427.79
64.17
491.96
49.19
49.20
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under,
including cutting the patch in proper shape, raking out joints and preparing plastering
the wall surface with white cement based polymer modified self curing mortar, including
disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
Description
Unit

MATERIAL
White cement based polymer modified self
curing compound in powder form
i/c 2% wastage
Carriage of white cement based polymer
modified self curing compound in powder form
LABOUR
Mason (average)
Beldar
Coolie
892
kg
Quantity
Rate
Amount
125.00
15.00
1875.00
L.S.
21.10
1.73
36.50
day
day
day
1.21
0.54
1.29
467.00
368.00
368.00
565.07
198.72
474.72
Code
Description
Unit
Quantity
9999
Scaffolding and sunderies

TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
L.S.
15.21
14.75A
Code
1301
2264
9999
0117
0114
Rate
1.73
Amount
26.31
3176.32
31.76
3208.08
481.21
3689.29
368.92
368.90
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity
at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank
and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm
per litre capacity of tank including marking the date of cleaning on the side of tank body
with the help of stencil and paint and disposing of malba all complete as per direction
of Engineer-in-Charge. (The old date already written on tank should be removed with
paint remover or black paint and if date is not written with the stencil or old date is not
removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings
or ball cock is damaged that is to be repaired by contractor at his own cost and nothing
extra will be paid on this account)
Description
Unit
Details of cost for 10 tanks

1 tank is of 500 litres capacity i.e. 5000 litres
MATERIAL
Bleaching powder
Carriage of Rubbish
(asuming 0.040m depth of silt)
Marking with paint i/c removal of existing
markings
LABOUR
for opening ball cock wheel valve and
other fittings
Beldar
for cleaning disinfecting etc
TOTAL
TOTAL
Cost of 5000 litres
Cost of 1 litre
Say
893
Quantity
Rate
Amount
quintal
cum
0.025
0.25
1750.00
103.77
43.75
25.94
L.S.
30.00
1.73
51.90
day
1.00
448.00
448.00
day
1.00
368.00
368.00
937.59
9.38
946.97
142.05
1089.02
0.21
0.20
14.76
Code
0129
9999
14.77
Code
9999
8500
0087
0139
0160
14.78
Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with
earth etc. and disposal of same, all as per the direction of Engineer-in-charge.
Description
Details of cost for 10 Nos.
LABOUR
Sewerman
T & P Bamboo, bucket, whell barrow etc.
TOTAL
TOTAL
Cost of 10 nos
Cost of each
Say
Unit
Quantity
day
L.S.
1.00
11.20
Rate
390.00
1.73
Amount
390.00
19.38
409.38
4.09
413.47
62.02
475.49
47.54
47.55
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated
high pressure suction cum jetting sewer cleaning machine fitted with pump having
4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled
operator, supervising engineer etc. for cleaning and partial desilting of manholes and
dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole
to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia
upto 300mm dia for all depth.
Description
Unit
Details of Cost for 208 metres

MATERIAL
Soap, brush, cloths & sundries
Water for jetting / blowback
Machineries
Hire Charges of Suction Jeting machine
2200 PSI machine i/c POL and operator
LABOUR
Skilled Beldar (for floor rubbing etc.)
Technician
TOTAL
TOTAL
Cost of 208 metres
Cost of 1.00 metre
Say
L.S.
1000 litre
Quantity
Rate
Amount
345.00
0.002
1.73
1500.00
596.85
3.00
day
1.00
36000.00
36000.00
day
day
4.00
1.00
407.00
775.00
1628.00
775.00
39000.15
390.00
39390.15
5908.52
45298.67
217.78
217.80
Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging)
including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The
cleaning shall consist following operations:(i)Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and
other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc.
and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
894
(iv) The treated surface shall be dried using air jetting and all loose particles shall be
removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of
Engineer-in-Charge.
Code
0011
0114
0114
0115
0101
9999
1301
0006
0138
0058
0114
0085
0114
14.79
Description
Let a underground tank of capacity 272000
litre or 272 KL and area of tank is 570sqm
(a) Dewater and slit cleaning
Considering through pumping 20% of water
to be lifted, water discharge =(272 x 20/
100=54.40KL)
Cost of pumping water with pump of
capacity 4000 litres per hours , = (54.4/4 =
13.6 hours = @ 8 hours/ day = 1.7 day)
Hire charges of Pump set of capacity 4000
litres/hour
Beldar
(b) Scrabing the internal surface of tank
Beldar
Coolie
Bhisti
Sundries
(c) Bleaching
Bleaching powder
Hire charges of Spraying machine including
electric charges
Sprayer (for bitumen, tar etc.)
(d) Air jetting
Air compressor
Beldar
(e) Ultra Violet Radiation
Using cost of Ultra Violet Radiation tube
Beldar
TOTAL
TOTAL
Cost of 570 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
day
day
1.70
10.88
650.00
368.00
1105.00
4003.84
day
day
day
L.S.
5.13
2.28
2.28
142.50
368.00
368.00
407.00
1.73
1887.84
839.04
927.96
246.53
quintal
0.57
1750.00
997.50
day
day
14.25
14.25
250.00
407.00
3562.50
5799.75
hour
day
2.00
0.25
200.00
368.00
400.00
92.00
hour
day
0.50
0.0625
189.00
368.00
94.50
23.00
19979.46
199.79
20179.25
3026.89
23206.14
40.71
40.70
Disconnecting damaged overhead/terrace PVC water storage tank of any size

from water supply line and removing from the terrace including shifting at
ground level as per direction of Engineer-in-charge.
Code
Description
Unit
Quantity
0117
Details of cost for 1 No

LABOUR
For disconnecting & dismantling of existing
W/s line of water storage tanks on terrace
of Qtrs.
day
0.10
895
Rate
448.00
Amount
44.80
Code
Description
Unit
Quantity
0114
Beldar
For Bringing the tank at Ground Level
Beldar
Sundries
TOTAL
TOTAL
Cost for each
Say
day
0.10
368.00
36.80
day
L.S.
0.20
1.10
368.00
1.73
73.60
1.90
157.10
1.57
158.67
23.80
182.47
182.45
0114
9999
14.80
14.80.1
Code
1953
1970
1890
9999
9977
1880
0129
0114
0126
0114
14.80.2
Code
1954
Rate
Amount
Providing & fixing White vitreous china water closet squatting pan (Indian type)
along with "S" or "P" trap including dismantling of old WC seat and "S" or "P"
trap at site complete with all operations including all necessary materials, labour
and disposal of dismantled material i/c malba, all complete as per the direction
of Engineer-in charge.
Long pattern W.C Pan of size 580x440 mm
Description
Details of cost for 1 no.
MATERIAL
Vitreous china Indian type W.C. pan size
580 mm
Vitreous china foot rests 250x125x25 mm
Centrifugally sand cast (spun) S&S "P"
or "S" trap
Cement sand & grit etc.
Less for
Dismantled "P" or "S" trap scrap (app. Wt 2 kg.)
LABOUR
(a) For dismantling WC seat and P or S trap
Sewerman
Beldar
(b) For Fixing WC seat and "P" or "S" trap
Mason 1st class
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
pair
1.00
1.00
450.00
100.00
450.00
100.00
each
L.S.
L.S.
1.00
13.36
13.52
300.00
1.73
1.73
300.00
23.11
23.39
kg
-2.00
22.00
-44.00
day
day
0.05
0.20
390.00
368.00
19.50
73.60
day
day
0.80
0.80
487.00
368.00
389.60
294.40
1629.60
16.30
1645.90
246.89
1892.79
1892.80
Orissa pattern W.C Pan of size 580x440 mm

Description
Unit
Quantity

MATERIAL
Vitreous china orrisa type W.C. pan size
580 mm
each
1.00
896
Rate
780.00
Amount
780.00
Code
Description
1890
Centrifugally sand cast (spun) S&S "P" or

"S" trap
Cement sand & grit etc.
Less for
Dismantled "P" or "S" trap scrap
(app. Wt 2 kg.)
LABOUR
(a) For dismantling WC seat and P or S trap
Sewerman
Beldar
(b) For Fixing WC seat and "P" or "S" trap
Mason 1st class
Beldar
TOTAL
TOTAL
Cost of each
Say
9999
9977
1880
0129
0114
0126
0114
14.81
Code
13.4.1
7752
9999
0123
0124
0114
9999
Unit
Quantity
Rate
Amount
each
L.S.
L.S.
1.00
13.36
13.52
300.00
1.73
1.73
300.00
23.11
23.39
kg
-2.00
22.00
-44.00
day
day
0.05
0.125
390.00
368.00
19.50
46.00
day
day
0.80
0.80
487.00
368.00
389.60
294.40
1832.00
18.32
1850.32
277.55
2127.87
2127.85
Cutting holes of required size in brick masonry wall for fixing of exhaust fan
including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and
making good the same etc. complete as per direction of Engineer-in-charge.
Description
Detail of Cost for 10 holes
Size 0.30x0.30x0.23 m wall
MATERIAL
12 mm plaster 1:4 (1 Cement: 4 Coarse sand)
Actual Area (10x4x0.3x0.23) = 0.296 + 0.24
L.S. For corners/sides = 3.00 Sqm
Rate as per Item No.13.4.1 of SH:FINISHING
PVC slotted pipe 200 mm dia as per
IS: 12818
Sundries
LABOUR
Proportionate labour taken as actually
required at site
(0.16/0.0306)= 0.11 Nos.
(0.16/0.030)x0.207 = 0.11 Nos.
Beldar
(1.25x0.207)/0.0306 =1.10 Nos.
Add L.S. For Delay
TOTAL
i.e. on (1267.03 - 542.55) = 724.48
TOTAL
- 542.55) = 731.72
Cost of 10 nos
Cost of each
Say
897
Unit
Quantity
Rate
Amount
sqm
3.00
180.85
542.55
metre
L.S.
0.25
8.06
700.00
1.73
175.00
13.94
day
0.11
487.00
53.57
day
0.11
448.00
49.28
day
1.10
368.00
404.80
L.S.
16.12
1.73
27.89
1267.03
7.24
1274.27
109.76
1384.03
138.40
138.40
14.82
Code
0114
9999
14.83
Code
0114
9999
14.84
Dismantling W.C. Pan of all sizes including disposal of dismantled materials

i/c malba all complete as per directions of Engineer-in-Charge.
Description
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
day
L.S.
0.125
1.00
Rate
368.00
1.73
Amount
46.00
1.73
47.73
0.48
48.21
7.23
55.44
55.45
Hacking of CC flooring including cleaning for surface etc. complete as per

direction of the Engineer-in-Charge.
Description
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
day
L.S.
0.03
1.00
Rate
368.00
1.73
Amount
11.04
1.73
12.77
0.13
12.90
1.94
14.84
1.48
1.50
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes

(within 50 metres lead) as per direction of Engineer-in-Charge.
(a) Internal Work- Exposed on wall
Code
9999
Description
Details of cost for 10 metre
LABOUR
Dismantling of G.I. Pipe and stacking etc.
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
898
Unit
Quantity
L.S.
10.00
Rate
1.73
Amount
17.30
17.30
0.17
17.47
2.62
20.09
2.00
2.00
14.85
Code
0637
0156
0114
Taking out existing wooden door shutter, repair by cutting, painting etc. and
refixing of repaired door shutters to existing door frames, including replacement
of hinges with screws, etc. as required, all complete as per the direction of the
Engineer-in-charge.
Description
Unit
Details of cost for one shutter (2.2 sqm)

Normal exiting size of shutter
1.00x2.02m =2.02sqm
MATERIAL
Bright finished or black enameled mild steel
screws 40 mm
Assuming old hinges fixed in Tee iron
frames
Half qty = 48/2=24 needs replacement
LABOUR
Carpenter (average)
Beldar
TOTAL
TOTAL
Cost for 2.2 sqm or each shutter
Cost for 2.02 sqm or each shutter
Say
899
Quantity
Rate
Amount
100 Nos
0.24
63.00
15.12
day
day
0.18
0.18
467.00
368.00
84.06
66.24
165.42
1.65
167.07
25.06
192.13
176.42
176.40
SUB HEAD : 15.0
DISMANTLING
AND
DEMOLISHING
901
15.1
Code
0114
0115
9999
Demolishing lime concrete manually/ by mechanical means and disposal of

material within 50 metres lead as per direction of Engineer- in-charge.
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
L.S.
0.44
0.37
1.04
Rate
368.00
368.00
1.73
Amount
161.92
136.16
1.80
299.88
3.00
302.88
45.43
348.31
348.30
15.2
Demolishing cement concrete manually/ by mechanical means including

disposal of material within 50 metres lead as per direction of Engineer - in charge.
15.2.1
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Code
0114
0115
9999
15.2.2
Code
0114
0115
9999
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
L.S.
1.59
0.72
4.81
Rate
368.00
368.00
1.73
Amount
585.12
264.96
8.32
858.40
8.58
866.98
130.05
997.03
997.05
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
SUB HEAD : 15- DISMANTLING AND DEMOLISHING
903
Unit
Quantity
day
day
L.S.
0.88
0.55
1.95
Rate
368.00
368.00
1.73
Amount
323.84
202.40
3.37
529.61
5.30
534.91
80.24
615.15
615.15
15.3
Code
0114
0115
9999
15.4
Code
0114
0115
9999
15.5
Code
0103
0114
9999
Demolishing R.C.C. work manually/ by mechanical means including stacking

of steel bars and disposal of unserviceable material within 50 metres lead as
per direction of Engineer - in- charge.
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
L.S.
2.65
0.72
7.02
Rate
368.00
368.00
1.73
Amount
975.20
264.96
12.14
1252.30
12.52
1264.82
189.72
1454.54
1454.55
Demolishing R.B. work manually/ by mechanical means including stacking of

steel bars and disposal of unserviceable material within 50 metres lead as per
direction of Engineer-in- charge.
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
L.S.
2.12
0.90
4.68
Rate
368.00
368.00
1.73
Amount
780.16
331.20
8.10
1119.46
11.19
1130.65
169.60
1300.25
1300.25
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C.

or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or
R.B. work) as per direction of Engineer-in-charge.
Description
R.C.C. or R.B. workReinforced area
considering 1% reinforcement = 0.01sqm
LABOUR
For cutting 0.01 sqm reinforcement
Beldar
Sundries
TOTAL
TOTAL
Cost of 1.00 sqm
Say
904
Unit
Quantity
day
day
L.S.
0.50
0.50
13.39
Rate
448.00
368.00
1.73
Amount
224.00
184.00
23.16
431.16
4.31
435.47
65.32
500.79
500.80
15.6
Code
0103
0114
9999
Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or

R.B. work.
Description
Detail of cost for 10 Nos
6 metres long 16 mm dia bars @
1.58 kg/metre
Total weight = 94.80 kg = 0.948 quintal
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Cost of 94.80 kg
Cost of 1.00 kg
Say
Unit
Quantity
day
day
L.S.
0.25
0.50
13.39
Rate
448.00
368.00
1.73
Amount
112.00
184.00
23.16
319.16
3.19
322.35
48.35
370.70
3.91
3.90
15.7
Demolishing brick work manually/ by mechanical means including stacking of

serviceable material and disposal of unserviceable material within 50 metres
lead as per direction of Engineer-in-charge.
15.7.1
In mud mortar
Code
0114
0115
9999
15.7.2
Code
0114
0115
9999
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
L.S.
0.30
0.37
1.04
Unit
Quantity
day
day
L.S.
1.24
0.46
1.04
Rate
368.00
368.00
1.73
Amount
110.40
136.16
1.80
248.36
2.48
250.84
37.63
288.47
288.45
In lime mortar with old mughal bricks

Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
905
Rate
368.00
368.00
1.73
Amount
456.32
169.28
1.80
627.40
6.27
633.67
95.05
728.72
728.70
15.7.3
Code
0114
0115
9999
15.7.4
Code
0114
0115
9999
In lime mortar
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
L.S.
0.44
0.37
1.04
Unit
Quantity
day
day
L.S.
1.06
0.90
2.47
Rate
368.00
368.00
1.73
Amount
161.92
136.16
1.80
299.88
3.00
302.88
45.43
348.31
348.30
In cement mortar
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Rate
368.00
368.00
1.73
Amount
390.08
331.20
4.27
725.55
7.26
732.81
109.92
842.73
842.75
15.8
Removing mortar from bricks and cleaning bricks including stacking within a
lead of 50 m (stacks of cleaned bricks shall be measured):
15.8.1
From brick work in mud mortar
Code
0114
0115
0124
9999
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1000 Nos
Say
906
Unit
Quantity
day
day
day
L.S.
2.40
1.60
0.40
1.82
Rate
368.00
368.00
448.00
1.73
Amount
883.20
588.80
179.20
3.15
1654.35
16.54
1670.89
250.63
1921.52
1921.50
15.8.2
Code
0114
0115
0124
9999
15.8.3
Code
0114
0115
0124
9999
From brick work in lime mortar

Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1000 Nos
Say
Unit
Quantity
day
day
day
L.S.
2.80
1.40
0.80
8.97
Unit
Quantity
day
day
day
L.S.
3.50
1.50
1.24
8.06
Rate
368.00
368.00
448.00
1.73
Amount
1030.40
515.20
358.40
15.52
1919.52
19.20
1938.72
290.81
2229.53
2229.55
From brick work in cement mortar

Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1000 Nos
Say
Rate
368.00
368.00
448.00
1.73
Amount
1288.00
552.00
555.52
13.94
2409.46
24.09
2433.55
365.03
2798.58
2798.60
15.9
Demolishing stone rubble masonry manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable material within
50 metres lead as per direction of Engineer-in-charge :
15.9.1
In lime mortar
Code
0114
0115
9999
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
907
Unit
Quantity
day
day
L.S.
0.61
0.49
1.95
Rate
368.00
368.00
1.73
Amount
224.48
180.32
3.37
408.17
4.08
412.25
61.84
474.09
474.10
15.9.2
Code
0114
0115
9999
In cement mortar
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
L.S.
1.30
1.04
2.73
Rate
368.00
368.00
1.73
Amount
478.40
382.72
4.72
865.84
8.66
874.50
131.18
1005.68
1005.70
15.10
Dismantling dressed stone work ashlar face stone work, marble work or
precast concrete work manually/ by mechanical means including stacking of
serviceable and disposal of unserviceable material within 50 metres lead as
per direction of Engineer-in-charge :
15.10.1
In lime mortar
Code
0114
0115
9999
15.10.2
Code
0114
0115
9999
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
L.S.
0.78
0.61
2.73
Unit
Quantity
day
day
L.S.
1.55
1.19
2.73
Rate
368.00
368.00
1.73
Amount
287.04
224.48
4.72
516.24
5.16
521.40
78.21
599.61
599.60
In cement mortar
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
908
Rate
368.00
368.00
1.73
Amount
570.40
437.92
4.72
1013.04
10.13
1023.17
153.48
1176.65
1176.65
15.11
Removing mortar from and cleaning stones and concrete articles (net quantity
of stacks of cleaned materials will be measured):
15.11.1
In lime mortar
Code
0124
0114
0115
9999
15.11.2
Code
0124
0114
0115
9999
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
day
L.S.
0.05
0.20
0.20
0.52
Unit
Quantity
day
day
day
L.S.
0.05
0.40
0.20
0.91
Rate
448.00
368.00
368.00
1.73
Amount
22.40
73.60
73.60
0.90
170.50
1.71
172.21
25.83
198.04
198.05
In cement mortar
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Rate
448.00
368.00
368.00
1.73
Amount
22.40
147.20
73.60
1.57
244.77
2.45
247.22
37.08
284.30
284.30
15.12
Dismantling doors, windows and clerestory windows (steel or wood) shutter

including chowkhats, architrave, holdfasts etc. complete and stacking within
50 metres lead :
15.12.1
Of area 3 sq. metres and below
Code
0124
0114
0103
9999
Description
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Cost of each
Say
909
Unit
Quantity
day
day
day
L.S.
0.10
0.18
0.05
1.43
Rate
448.00
368.00
448.00
1.73
Amount
44.80
66.24
22.40
2.47
135.91
1.36
137.27
20.59
157.86
157.85
15.12.2
Code
0124
0114
0103
9999
Of area beyond 3 sq. metres

Description
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
day
day
day
L.S.
0.13
0.25
0.07
2.73
Rate
448.00
368.00
448.00
1.73
Amount
58.24
92.00
31.36
4.72
186.32
1.86
188.18
28.23
216.41
216.40
15.13
Taking out doors, windows and clerestory window shutters (steel or wood)
including stacking within 50 metres lead :
15.13.1
Of area 3 sq. metres and below
Code
0112
0114
9999
15.13.2
Code
0112
0114
9999
Description
LABOUR
Carpenter 2nd class
Beldar
Sundries
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
day
day
L.S.
0.05
0.08
0.52
Unit
Quantity
day
day
L.S.
0.07
0.10
0.91
Rate
448.00
368.00
1.73
Amount
22.40
29.44
0.90
52.74
0.53
53.27
7.99
61.26
61.25
Of area beyond 3 sq. metres

Description
LABOUR
Carpenter 2nd class
Beldar
Sundries
TOTAL
TOTAL
Cost of each
Say
910
Rate
448.00
368.00
1.73
Amount
31.36
36.80
1.57
69.73
0.70
70.43
10.56
80.99
81.00
15.14
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres

span and 5 metres height including stacking the material within 50 metres
lead :
15.14.1
Of sectional area 40 square centimetres and above
Code
0112
0114
9999
15.14.2
Code
0112
0114
9999
Description
LABOUR
Carpenter 2nd class
Beldar
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
L.S.
2.00
2.00
13.39
Rate
448.00
368.00
1.73
Amount
896.00
736.00
23.16
1655.16
16.55
1671.71
250.76
1922.47
1922.45
Of sectional area below 40 square centimetres

Description
Detail of cost for 10 metre
LABOUR
Carpenter 2nd class
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
Unit
Quantity
day
day
L.S.
0.08
0.08
0.52
Rate
448.00
368.00
1.73
Amount
35.84
29.44
0.90
66.18
0.66
66.84
10.03
76.87
7.68
7.70
15.15
Extra for dismantling trusses, rafters, purlins etc. of wood work for every
additional span of one metre or part thereof beyond 10 metres :
15.15.1
Code
0103
0114
9999
Description
Detail of cost for 1cum for every additional
span of 1 metre
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Cost of 1.00 cum per metre span
Say
911
Unit
Quantity
day
day
L.S.
0.20
0.30
13.39
Rate
448.00
368.00
1.73
Amount
89.60
110.40
23.16
223.16
2.23
225.39
33.81
259.20
259.20
15.15.2
Code
0103
0114
9999

Description
Detail of cost for 10 metre for every
additional span of 1 metre
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 metre per metre span
Cost of 1.00 metre per metre span
Say
Unit
Quantity
day
day
L.S.
0.006
0.006
0.39
Rate
448.00
368.00
1.73
Amount
2.69
2.94
0.67
6.30
0.06
6.36
0.95
7.31
0.73
0.75
15.16
Extra for dismantling trusses, rafters, purlins etc. of wood work for every
additional height of one metre or part thereof beyond 5 metres :
15.16.1
Code
0103
0114
9999
15.16.2
Code
0103
0114
9999
Description
Detail of cost for 1 cum for every additional
height of 1 metre
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Cost of 1.00 cum per metre height
Say
Unit
Quantity
day
day
L.S.
0.25
0.50
13.39
Rate
448.00
368.00
1.73
Amount
112.00
184.00
23.16
319.16
3.19
322.35
48.35
370.70
370.70

Description
Detail of cost for 10 metre for every
additional height of 1 metre
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 metre per metre height
Cost of 1.00 metre per metre height
Say
912
Unit
Quantity
day
day
L.S.
0.01
0.02
0.39
Rate
448.00
368.00
1.73
Amount
4.48
7.36
0.67
12.51
0.13
12.64
1.90
14.54
1.45
1.45
15.17
Dismantling steel work in single sections including dismembering and stacking

within 50 metres lead in:
15.17.1
R.S. Joists
Code
0103
0100
0114
9999
15.17.2
Code
0103
0100
0114
9999
15.18
Code
0103
0100
0114
9999
Description
Detail of cost for 1 quintal
LABOUR
Bandhani
Beldar
Sundries
TOTAL
TOTAL
Cost of 1.00 quintal
Cost of 1.00 kg
Say
Unit
Quantity
day
day
day
L.S.
0.05
0.10
0.15
2.73
Unit
Quantity
day
day
day
L.S.
0.05
0.05
0.10
2.73
Rate
448.00
407.00
368.00
1.73
Amount
22.40
40.70
55.20
4.72
123.02
1.23
124.25
18.64
142.89
1.42
1.40
Channels, angles, tees and flats

Description
LABOUR
Bandhani
Beldar
Sundries
TOTAL
TOTAL
Cost of 1.00 kg
Say
Rate
448.00
407.00
368.00
1.73
Amount
22.40
20.35
36.80
4.72
84.27
0.84
85.11
12.77
97.88
0.97
0.95
Dismantling steel work in built up sections in angles, tees, flats and channels
including all gusset plates, bolts, nuts, cutting rivets, welding etc. including
dismembering and stacking within 50 metres lead.
Description
LABOUR
Bandhani
Beldar
Sundries
TOTAL
TOTAL
Cost of 1.00 kg
Say
913
Unit
Quantity
day
day
day
L.S.
0.15
0.10
0.25
4.16
Rate
448.00
407.00
368.00
1.73
Amount
67.20
40.70
92.00
7.20
207.10
2.07
209.17
31.38
240.55
2.40
2.40
15.19
Code
0100
0114
9999
15.20
Code
0100
0114
9999
15.21
Code
0100
0114
9999
Dismantling steel work manually/ by mechanical means in built up sections

without dismembering and stacking within 50 metres lead as per direction of
Engineer-in-charge.
Description
LABOUR
Bandhani
Beldar
Sundries
TOTAL
TOTAL
Cost of 1.00 kg
Say
Unit
Quantity
day
day
L.S.
0.10
0.25
2.73
Rate
407.00
368.00
1.73
Amount
40.70
92.00
4.72
137.42
1.37
138.79
20.82
159.61
1.59
1.60
Extra for dismantling trusses, rafters, purlins etc. of steel work for every
additional span of one metre or part thereof beyond 10 metres
Description
Detail of cost for 1 quintal for every
additional span of 1 metre beyond 10 metre
LABOUR
Bandhani
Beldar
Sundries
TOTAL
TOTAL
Cost of 1.00 quintal per metre span
Cost of 1.00 kg per metre span
Say
Unit
Quantity
day
day
L.S.
0.02
0.06
0.39
Rate
407.00
368.00
1.73
Amount
8.14
22.08
0.67
30.89
0.31
31.20
4.68
35.88
0.35
0.35
Extra for dismantling trusses, rafters, purlins etc. of steel work for every
additional height of one metre or part thereof beyond 5 metres.
Description
Detail of cost for 1 quintal for every
additional height of 1 metre beyond 5 metre
LABOUR
Bandhani
Beldar
Sundries
TOTAL
TOTAL
Cost of 1.00 quintal per metre height
Cost of 1.00 kg per metre height
Say
914
Unit
Quantity
day
day
L.S.
0.02
0.06
0.39
Rate
407.00
368.00
1.73
Amount
8.14
22.08
0.67
30.89
0.31
31.20
4.68
35.88
0.35
0.35
15.22
Code
0130
0114
Extra for marking of structural steel work required to be re-erected.

Description
LABOUR
Mistry
Beldar
TOTAL
TOTAL
Cost of 1.00 kg
Say
Unit
Quantity
day
day
0.20
0.20
Rate
487.00
368.00
Amount
97.40
73.60
171.00
1.71
172.71
25.91
198.62
1.98
2.00
15.23
Dismantling tile work in floors and roofs laid in cement mortar including
stacking material within 50 metres lead.
15.23.1
For thickness of tiles 10 mm to 25 mm
Code
0124
0114
0115
9999
15.23.2
Code
0124
0114
0115
9999
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
day
L.S.
0.30
0.12
0.24
2.73
Rate
448.00
368.00
368.00
1.73
Amount
134.40
44.16
88.32
4.72
271.60
2.72
274.32
41.15
315.47
31.54
31.55
For thickness of tiles above 25 mm and up to 40 mm

Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
915
Unit
Quantity
day
day
day
L.S.
0.59
0.18
0.24
2.73
Rate
448.00
368.00
368.00
1.73
Amount
264.32
66.24
88.32
4.72
423.60
4.24
427.84
64.18
492.02
49.20
49.20
15.24
Code
0114
0115
9999
15.25
Code
0114
0115
9999
15.26
Code
0124
0114
0115
9999
Demolishing dry brick pitching in floors, drains etc. including stacking

lead :
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
L.S.
0.25
1.00
2.73
Rate
368.00
368.00
1.73
Amount
92.00
368.00
4.72
464.72
4.65
469.37
70.41
539.78
539.80
Dismantling stone slab flooring laid in cement mortar including stacking of

lead.
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
L.S.
1.77
0.75
8.06
Rate
368.00
368.00
1.73
Amount
651.36
276.00
13.94
941.30
9.41
950.71
142.61
1093.32
109.33
109.35
Demolishing brick tile covering in terracing including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead.
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
916
Unit
Quantity
day
day
day
L.S.
0.54
0.16
0.24
2.47
Rate
448.00
368.00
368.00
1.73
Amount
241.92
58.88
88.32
4.27
393.39
3.93
397.32
59.60
456.92
45.69
45.70
15.27
Code
0114
0115
9999
Demolishing mud phaska in terracing and disposal of material within 50 metres

lead.
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
L.S.
0.25
0.62
1.04
Rate
368.00
368.00
1.73
Amount
92.00
228.16
1.80
321.96
3.22
325.18
48.78
373.96
373.95
15.28
Dismantling roofing including ridges, hips, valleys and gutters etc., and
stacking the material within 50 metres lead of:
15.28.1
G.S. Sheet
Code
0112
0114
9999
15.28.2
Code
0112
0114
9999
Description
LABOUR
Carpenter 2nd class
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
L.S.
0.50
1.00
6.76
Unit
Quantity
day
day
L.S.
0.20
0.50
5.33
Rate
448.00
368.00
1.73
Amount
224.00
368.00
11.69
603.69
6.04
609.73
91.46
701.19
70.11
70.10
Asbestos sheet
Description
LABOUR
Carpenter 2nd class
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
917
Rate
448.00
368.00
1.73
Amount
89.60
184.00
9.22
282.82
2.83
285.65
42.85
328.50
32.85
32.85
15.29
Code
0114
0115
9999
15.30
Code
0114
0115
9999
15.31
Code
0114
0115
9999
Dismantling stone slab roofing over wooden karries or R.C.C. battens

(dismantling karries and battens to be paid for separately), including stacking
of serviceable material and disposal of unserviceable material within 50 metres
lead.
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
day
day
L.S.
1.77
0.75
8.06
Rate
368.00
368.00
1.73
Amount
651.36
276.00
13.94
941.30
9.41
950.71
142.61
1093.32
1093.30
Dismantling jack arch roofing and floors including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead.
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
L.S.
1.19
1.21
8.06
Rate
368.00
368.00
1.73
Amount
437.92
445.28
13.94
897.14
8.97
906.11
135.92
1042.03
104.20
104.20
Dismantling tiled roofing with battens, boarding etc. complete including

stacking of serviceable material and disposal of unserviceable material within
50 metres lead.
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
918
Unit
Quantity
day
day
L.S.
1.73
0.25
8.06
Rate
368.00
368.00
1.73
Amount
636.64
92.00
13.94
742.58
7.43
750.01
112.50
862.51
86.25
86.25
15.32
Code
0114
9999
15.33
Code
0114
0115
9999
Demolishing thatch roofing including mats, bamboo, jaffari etc. complete

including stacking of serviceable material and disposal of unserviceable
material within 50 metres lead.
Description
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
L.S.
0.54
3.64
Rate
368.00
1.73
Amount
198.72
6.30
205.02
2.05
207.07
31.06
238.13
23.81
23.80
Dismantling wooden ballies in posts and struts including stacking within 50

metres lead.
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 50.00 metre
Cost of 1.00 metre
Say
Unit
Quantity
day
day
L.S.
0.50
0.50
0.52
Rate
368.00
368.00
1.73
Amount
184.00
184.00
0.90
368.90
3.69
372.59
55.89
428.48
8.56
8.55
15.34
Dismantling and stacking within 50 metres lead, fencing posts or struts

including all earth work and dismantling of concrete etc. in base of:
15.34.1
T' or 'L' iron or pipe
Code
0114
0115
9999
9999
Description
LABOUR
Beldar
Coolie
Excavation, transporting and stacking the
posts to the required place within 50 metre
s lead, refilling the pit and dressing the same
Extra for lifting of R.C.C. posts being
heavier than L iron and cleaning the posts
of stacking concrete
919
Unit
Quantity
Rate
Amount
day
day
0.11
0.07
368.00
368.00
39.38
24.66
L.S.
0.26
1.73
0.45
L.S.
13.39
1.73
23.16
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of each
Say
L.S.
1.43
Unit
Quantity
day
day
L.S.
0.10
0.06
0.26
368.00
368.00
1.73
35.70
22.08
0.45
L.S.
13.39
1.73
23.16
L.S.
L.S.
8.06
2.73
1.73
1.73
13.94
4.72
100.05
1.00
101.05
15.16
116.21
116.20
15.34.2
R.C.C.
Code
Description
0114
0115
9999
9999
9999
9999
15.35
Code
9999
9999
15.36

LABOUR
Beldar
Coolie
Sundries
Excavation, transporting and stacking the
posts to the required place within 50 metre
s lead, refilling the pit and dressing the same
Extra for lifting of R.C.C. posts being
heavier than L iron and cleaning the posts
of stacking concrete
Sundries
TOTAL
TOTAL
Cost of each
Say
Rate
1.73
Rate
Amount
2.47
90.12
0.90
91.02
13.65
104.67
104.65
Amount
Cutting ballies or wooden posts of fencing at the point of projection above

the concrete or ground and stacking the same within 50 metres lead.
Description
Detail of cost for 1 ballie (post)
Cutting
Transporting and stacking
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
L.S.
L.S.
2.73
1.43
Rate
1.73
1.73
Amount
4.72
2.47
7.19
0.07
7.26
1.09
8.35
8.35
Dismantling barbed wire or flexible wire rope in fencing including making rolls
and stacking within 50 metres lead.
Code
Description
Unit
Quantity
0114

LABOUR
Beldar
day
3.50
920
Rate
368.00
Amount
1288.00
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 1.00 kg
Say
L.S.
5.33
15.37
Code
0124
0114
0115
9999
15.38
Code
0112
0114
0115
9999
Rate
1.73
Amount
9.22
1297.22
12.97
1310.19
196.53
1506.72
15.06
15.05
Dismantling wooden trellis work excluding frames but including stacking the
serviceable material within 50 metres lead.
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
day
L.S.
0.10
0.25
0.25
2.73
Rate
448.00
368.00
368.00
1.73
Amount
44.80
92.00
92.00
4.72
233.52
2.34
235.86
35.38
271.24
27.12
27.10
Dismantling expanded metal or I.R.C. fabrics with necessary battens and

beading including stacking the serviceable material within 50 metres lead.
Description
LABOUR
Carpenter 2nd class
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
921
Unit
Quantity
day
day
day
L.S.
0.10
0.40
0.20
4.16
Rate
448.00
368.00
368.00
1.73
Amount
44.80
147.20
73.60
7.20
272.80
2.73
275.53
41.33
316.86
31.68
31.70
15.39
Dismantling wooden boardings in lining of walls and partitions, excluding

supporting members but including stacking within 50 metres lead :
15.39.1
Up to 10 mm thick
Code
0112
0114
0115
9999
15.39.2
Code
0112
0114
0115
9999
15.39.3
Code
0112
0114
0115
9999
Description
LABOUR
Carpenter 2nd class
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
day
L.S.
0.15
0.20
0.20
5.33
Unit
Quantity
day
day
day
L.S.
0.20
0.25
0.25
6.76
Unit
Quantity
day
day
day
L.S.
0.20
0.30
0.30
13.39
Rate
448.00
368.00
368.00
1.73
Amount
67.20
73.60
73.60
9.22
223.62
2.24
225.86
33.88
259.74
25.97
25.95
Thickness above 10 mm up to 25 mm
Description
LABOUR
Carpenter 2nd class
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
448.00
368.00
368.00
1.73
Amount
89.60
92.00
92.00
11.69
285.29
2.85
288.14
43.22
331.36
33.13
33.15
Description
LABOUR
Carpenter 2nd class
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
922
Rate
448.00
368.00
368.00
1.73
Amount
89.60
110.40
110.40
23.16
333.56
3.34
336.90
50.54
387.44
38.74
38.75
15.40
Dismantling precast concrete or stone slabs in walls, partition walls etc.

including stacking within 50 metres lead :
15.40.1
Thickness up to 40 mm
Code
0124
0114
0115
9999
15.40.2
Code
0124
0114
0115
9999
15.41
Code
0112
0114
9999
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
day
L.S.
0.20
2.00
0.50
13.39
Unit
Quantity
day
day
day
L.S.
0.30
3.00
0.75
18.85
Rate
448.00
368.00
368.00
1.73
Amount
89.60
736.00
184.00
23.16
1032.76
10.33
1043.09
156.46
1199.55
119.95
119.95
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Rate
448.00
368.00
368.00
1.73
Amount
134.40
1104.00
276.00
32.61
1547.01
15.47
1562.48
234.37
1796.85
179.68
179.70
Dismantling cement asbestos or other hard board ceiling or partition walls

including stacking of serviceable materials and disposal of unserviceable
materials within 50 metres lead.
Description
Detail of cost for 10 sqm.
LABOUR
Carpenter 2nd class
Beldar
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
923
Unit
Quantity
day
day
L.S.
0.20
0.30
5.33
Rate
448.00
368.00
1.73
Amount
89.60
110.40
9.22
209.22
2.09
211.31
31.70
243.01
24.30
24.30
15.42
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including
stacking the material within 50 metres lead :
15.42.1
75 to 80 mm dia pipe
Code
0114
0115
9999
15.42.2
Code
0114
0115
9999
15.42.3
Code
0114
0115
9999
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
Unit
Quantity
day
day
L.S.
0.36
0.36
0.91
Unit
Quantity
day
day
L.S.
0.36
0.38
1.56
Unit
Quantity
day
day
L.S.
0.36
0.40
2.08
Rate
368.00
368.00
1.73
Amount
132.48
132.48
1.57
266.53
2.67
269.20
40.38
309.58
30.95
30.95
100 mm dia pipe

Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
Rate
368.00
368.00
1.73
Amount
132.48
139.84
2.70
275.02
2.75
277.77
41.67
319.44
31.94
31.95
150 mm dia pipe

Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
924
Rate
368.00
368.00
1.73
Amount
132.48
147.20
3.60
283.28
2.83
286.11
42.92
329.03
32.90
32.90
15.43
Dismantling manually/ by mechanical means including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead as per
direction of Engineer-in-charge :
15.43.1
Water bound macadam road
Code
Description
Unit
Quantity
Rate
Amount
day
day
4.80
2.40
368.00
368.00
1766.40
883.20
L.S.
89.70
1.73
155.18
2804.78
28.05
2832.83
424.92
3257.75
90.49
90.50
Unit
Quantity
day
day
9.60
4.80
368.00
368.00
3532.80
1766.40
L.S.
107.64
1.73
186.22
5485.42
54.85
5540.27
831.04
6371.31
176.98
177.00
0114
0115
9999
15.43.2
Code
0114
0115
9999
Consider a road 6 metres wide and 6

metres length wise 25 cm average depth =
9.00 cubic metre
LABOUR
For cutting road taking out soiling and
metalling including sorting and screening
Beldar
Coolie
Labour for stacking of serviceable material
and disposal of unserviceable material
within 50 metres lead
TOTAL
TOTAL
Cost of 36.00 sqm
Cost of 1.00 sqm
Say
bituminous road
Description
Consider a road 6 metres wide and 6
metres length wise 30 cm average depth =
10.80 cubic metre
LABOUR
For cutting road taking out soiling and
metalling including sorting and screening
Beldar
Coolie
Labour for stacking of serviceable material
and disposal of unserviceable material
within 50 metres lead
TOTAL
TOTAL
Cost of 36.00 sqm
Cost of 1.00 sqm
Say
925
Rate
Amount
15.44
Dismantling G.I. pipes (external work) including excavation and refilling trenches
after taking out the pipes, manually/ by mechanical means including stacking of
pipes within 50 metres lead as per direction of Engineer-in-charge :
15.44.1
15 mm to 40 mm nominal bore
Code
0114
0115
9999
15.44.2
Code
0114
0115
9999
Description
LABOUR
Trenching and refilling etc
Beldar
Coolie
Dismantling G.I. pipe and stacking etc
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
Unit
Quantity
day
day
L.S.
0.66
0.66
35.88
Unit
Quantity
day
day
L.S.
0.66
0.66
71.76
Rate
368.00
368.00
1.73
Amount
242.88
242.88
62.07
547.83
5.48
553.31
83.00
636.31
63.63
63.65
Above 40 mm nominal bore

Description
LABOUR
Trenching and refilling etc
Beldar
Coolie
Dismantling G.I. pipe and stacking etc
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
Rate
368.00
368.00
1.73
Amount
242.88
242.88
124.14
609.90
6.10
616.00
92.40
708.40
70.84
70.85
15.45
Dismantling C.I. pipes including excavation and refilling trenches after taking
out the pipes, manually/ by mechanical means breaking lead caulked joints,
melting of lead and making into blocks including stacking of pipes & lead at site
within 50 metre lead as per direction of Engineer-in-charge:
15.45.1
Up to 150 mm diameter
Code
Description
Unit
Detail of cost for 40.26 metre or 11 nos joints

Earth work in excavation for dismantling
pipes including refilling of excavated earth
1x40.26x0.55x0.75 m =16.61cum
Deduct for pipes of average 100 mm dia
=1x40.26x(22/7)/4x(0.118)x(0.118) =0.44cum
Total =16.17cum
926
Quantity
Rate
Amount
Code
2.8.1
2.25
0761
0771
0117
0114
9977
15.45.2
Code
2.8.1
2.25
0761
0771
0117
0114
9977
Description
LABOUR
Rate as per Item No.2.8.1 of
SH: EARTH WORK
Rate as per Item No.2.25 of
SH: EARTH WORK
Fuel wood
Kerosene oil
Beldar
Carriage
TOTAL
i.e. on (7002.52 - 4724.07) = 2278.45
TOTAL
- 4724.07) = 2301.23
Cost of 40.26 metre
Cost of 1.00 metre
Say
Unit
Quantity
Rate
Amount
cum
16.17
166.40 2690.69(A)
cum
quintal
litre
day
day
L.S.
16.17
0.46
0.38
0.63
4.50
53.82
125.75
500.00
45.00
448.00
368.00
1.73
2033.38A)
230.00
17.10
282.24
1656.00
93.11
7002.52
22.78
7025.30
345.18
7370.48
183.07
183.05
Above 150 mm dia up to 300 mm dia

Description
1x40.26x0.65x0.75 m =19.63cum
=1x40.26x(22/7)/4x(0.274)x(0.274)
=2.37cum
Total =17.26cum
LABOUR
SH: EARTH WORK
SH: EARTH WORK
Fuel wood
Kerosene oil
Beldar
Carriage
TOTAL
i.e. on (9090.87 - 5042.51) = 4048.36
TOTAL
- 5042.51) = 4088.84
Cost of 40.26 metre
Cost of 1.00 metre
Say
927
Unit
Quantity
Rate
Amount
cum
17.26
166.40 2872.06(A)
cum
quintal
litre
day
day
L.S.
17.26
1.03
1.14
1.30
7.50
80.73
125.75 2170.45(A)
500.00
515.00
45.00
51.30
448.00
582.40
368.00
2760.00
1.73
139.66
9090.87
40.48
9131.35
613.33
9744.68
242.04
242.05
15.45.3
Code
2.8.1
2.25
0761
0771
0117
0114
9988
Above 300 mm diameter

Description
1x40.26x0.85x0.75 m =25.67cum
=1x40.26x(22/7)/4x(0.48)x(0.48) =7.29cum
Total =18.38cum
LABOUR
SH: EARTH WORK
SH: EARTH WORK
Fuel wood
Kerosene oil
Beldar
Carriage and sundries
TOTAL
i.e. on (11644.64 - 5369.72) = 6274.92
TOTAL
- 5369.72) = 6337.67
Cost of 40.26 metre
Cost of 1.00 metre
Say
Unit
Quantity
Rate
Amount
cum
18.38
166.40 3058.43(A)
cum
quintal
litre
day
day
L.S.
18.38
1.40
2.27
2.25
11.50
134.55
125.75 2311.29(A)
500.00
700.00
45.00
102.15
448.00
1008.00
368.00
4232.00
1.73
232.77
11644.64
62.75
11707.39
950.65
12658.04
314.40
314.40
15.46
Dismantling steel cylinder R.C. pipes including excavation and refilling trenches
after taking out the pipes, manually/ by mechanical means breaking lead caulked
joints, melting of lead and making into blocks including stacking of pipes &
lead at site within 50 metres lead as per direction of Engineer-in-charge :
15.46.1
Code
Description
0114
0115
0101
0761
0771
0117
0114

1x40.26x1.30x1.65 m =86.36cum
=1x40.26x(22/7)/4x(0.48)x(0.48) =7.29cum
Total=79.07cum
LABOUR
Beldar
Coolie
Bhisti
Fuel wood
Kerosene oil
Beldar
Unit
928
day
day
day
quintal
litre
day
day
Quantity
5.32
5.46
0.31
1.40
2.27
2.25
11.50
Rate
368.00
368.00
407.00
500.00
45.00
448.00
368.00
Amount
1957.76
2009.28
126.17
700.00
102.15
1008.00
4232.00
Code
Description
Unit
Quantity
9988

TOTAL
TOTAL
Cost of 40.26 metre
Cost of 1.00 metre
Say
L.S.
134.55
Unit
Quantity
15.46.2
Code
0114
0115
0101
0761
0771
0117
0114
9988
Rate
1.73
Amount
232.77
10368.13
103.68
10471.81
1570.77
12042.58
299.12
299.10

Description
1x40.26x1.30x1.65 m =86.36cum
=1x40.26x(22/7)/4x(1.00)x(1.00) =31.63cum
Total=54.73cum
LABOUR
Beldar
Coolie
Bhisti
Fuel wood
Kerosene oil
Beldar
TOTAL
TOTAL
Cost of 40.26 metre
Cost of 1.00 metre
Say
day
day
day
quintal
litre
day
day
L.S.
15.82
16.25
0.93
3.08
5.00
10.00
20.00
179.40
Rate
368.00
368.00
407.00
500.00
45.00
448.00
368.00
1.73
Amount
5821.76
5980.00
378.51
1540.00
225.00
4480.00
7360.00
310.36
26095.63
260.96
26356.59
3953.49
30310.08
752.85
752.85
15.47
Dismantling asbestos cement pressure pipes including excavation and refilling

trenches after taking out the pipes manually/ by mechanical means and stacking
the pipes within 50 metres lead as per direction of Engineer-in-charge :
15.47.1
Code
Description
Unit
Detail of cost for 10 metre or 11 nos joints

10.00x0.55x0.75 m =4.125cum
=1x10x(22/7)/4x(0.118)x(0.118) =0.109cum
Total=4.016cum
929
Quantity
Rate
Amount
Code
0114
0115
0101
0114
0115
9988
15.47.2
Code
0114
0115
0101
0114
0115
9988
15.48
Code
Description
LABOUR
Beldar
Coolie
Bhisti
Beldar
Coolie
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
Unit
Quantity
day
day
day
day
day
L.S.
1.16
1.19
0.07
0.36
0.38
1.56
Unit
Quantity
day
day
day
day
day
L.S.
1.24
1.28
0.07
0.36
0.88
3.77
Rate
368.00
368.00
407.00
368.00
368.00
1.73
Amount
426.88
437.92
28.49
132.48
139.84
2.70
1168.31
11.68
1179.99
177.00
1356.99
135.69
135.70

Description
Detail of cost for 10 metre or 11 nos joints
10.00x0.65x0.75 m =4.88cum
=1x10x(22/7)/4x(0.274)x(0.274) =0.590cum
Total=4.29cum
LABOUR
Beldar
Coolie
Bhisti
Beldar
Coolie
TOTAL
TOTAL
Cost of 10.00 metre
Cost of 1.00 metre
Say
Rate
368.00
368.00
407.00
368.00
368.00
1.73
Amount
456.32
471.04
28.49
132.48
323.84
6.52
1418.69
14.19
1432.88
214.93
1647.81
164.78
164.80
Taking out C.I. cover with frame from R.C.C. top slab of manholes of various
sizes including demolishing of R.C.C. work manually/ by mechanical means
and stacking of useful materials near the site and disposal of unserviceable
materials within 50 metres lead as per direction of Engineer-in-charge.
Description
Unit
Details of cost for 1 man hole

Demolition of R.C.C. slab
1.3x1.2x0.15 m =0.234cum
Less cover 0.61x0.455x0.15 m =0.042cum
=0.192cum
930
Quantity
Rate
Amount
Code
0114
0115
9999
9999
15.49
Code
0114
0115
9999
9999
15.50
Code
Description
LABOUR
Beldar
Coolie
Removel of C.I. Cover with frame including
stacking
Sundries
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
day
day
0.50
0.14
368.00
368.00
184.00
51.52
L.S.
L.S.
1.30
7.15
1.73
1.73
2.25
12.37
250.14
2.50
252.64
37.90
290.54
290.55
Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of
various sizes including demolishing of R.C.C. work manually/ by mechanical
means and stacking of useful materials near the site and disposal of
unserviceable materials within 50 metres lead as per direction of Engineer-incharge.
Description
Detail of cost for 1 man hole
Demolition of R.C.C. slab
1.1x0.9x0.15 m =0.148cum
Less cover 0.61x0.455x0.15 m =0.042cum
=0.106cum Say 0.11cum
LABOUR
Beldar
Coolie
Removel of C.I. Cover with frame including
stacking
Sundries
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
day
day
0.29
0.08
368.00
368.00
106.72
29.44
L.S.
L.S.
0.65
5.33
1.73
1.73
1.12
9.22
146.50
1.47
147.97
22.20
170.17
170.15
Dismantling of R.C.C. spun vent shaft including excavating the cement concrete
pit completely, taking out the shaft, refilling the excavated gap, stacking the
useful materials near the site and disposal of unserviceable materials within 50
metres lead.
Description
Unit

Dismantling cement concrete
1:4:8 0.90x0.90x1.35m =1.094cum
Less shaft 1/4x22/7x(0.450)x(0.450)x
1.10 m =0.175cum
931
Quantity
Rate
Amount
Code
Description
Unit
Quantity
0114
0115
9999
0114
0115
9999
0130
0123
0124
0100
0114
9999

1:2:4 0.90x0.90x0.15m =0.122cum
Less shaft 1/4x22/7x0.15x0.45 m
=0.024cum
LABOUR
Beldar
Coolie
Sundries
Beldar
Coolie
Sundries
Mistry
Bandhani
Beldar
Sundries for scaffolding etc
TOTAL
TOTAL
Cost of each
Say
day
day
L.S.
day
day
L.S.
day
day
day
day
day
L.S.
0.81
0.51
1.82
0.16
0.07
0.52
0.25
0.12
0.12
1.00
1.00
53.82
15.51
Code
0114
0115
9999
0114
0115
9999
0114
0115
9999
9999
Rate
368.00
368.00
1.73
368.00
368.00
1.73
487.00
487.00
448.00
407.00
368.00
1.73
Amount
298.08
187.68
3.15
58.88
25.76
0.90
121.75
58.44
53.76
407.00
368.00
93.11
1676.51
16.77
1693.28
253.99
1947.27
1947.25
Dismantling of road gully chamber of various sizes including C.I. grating with frame
including stacking of useful materials near the site and disposal of unserviceable
materials within 50 metres lead including refilling the excavated gap.
Description
Detail of cost for one chamber
a) 1:5:10 1.05x1.00x0.15m =0.16cum
Dismantling brick work in cement mortar
2.70x0.20x0.45m =0.24cum
b) 1:2:4 2.70x0.20x0.15m =0.08cum
LABOUR
Beldar
Coolie
Sundries
Beldar
Coolie
Sundries
Beldar
Coolie
Dismantling C.I. Grating
TOTAL
TOTAL
Cost of each
Say
932
Unit
Quantity
day
day
L.S.
day
day
L.S.
day
day
L.S.
L.S.
0.14
0.09
0.26
0.25
0.22
0.52
0.13
0.06
0.39
7.15
Rate
368.00
368.00
1.73
368.00
368.00
1.73
368.00
368.00
1.73
1.73
Amount
51.52
33.12
0.45
92.00
80.96
0.90
47.84
22.08
0.67
12.37
341.91
3.42
345.33
51.80
397.13
397.15
15.52
Code
0116
0114
9999
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including

stacking of useful materials near the site and disposal of unserviceable materials
within 50 metres lead.
Description
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
day
day
L.S.
0.25
0.50
17.94
Rate
487.00
368.00
1.73
Amount
121.75
184.00
31.04
336.79
3.37
340.16
51.02
391.18
391.20
15.53
Dismantling of C.I. sluice valve including stacking of useful materials within a lead
of 50 metres
15.53.1
Code
0116
0117
0114
9999
15.53.2
Description
Detail of cost for dismantling 10 sluice
valves (ace.) 100mm
LABOUR
Fitter (grade 1)
Beldar
Sundries for removing the R.C.C. cover etc
for dismantling sluice valve
TOTAL
TOTAL
Cost of 10 Nos
Cost of each
Say
Unit
Quantity
Rate
Amount
day
day
day
0.60
0.40
1.60
487.00
448.00
368.00
292.20
179.20
588.80
L.S.
89.70
1.73
155.18
1215.38
12.15
1227.53
184.13
1411.66
141.16
141.15
Code
Description
Unit
Quantity
0116
0117
0114
Detail of cost for dismantling 10 sluice

valves (ace.) 100mm
LABOUR
Fitter (grade 1)
Beldar
day
day
day
2.40
1.54
6.40
933
Rate
487.00
448.00
368.00
Amount
1168.80
689.92
2355.20
Code
Description
9999
Sundries for removing the R.C.C. cover etc

for dismantling sluice valve
TOTAL
TOTAL
Cost of 10 Nos
Cost of each
Say
15.54
Code
0116
0117
0114
Unit
Quantity
L.S.
89.70
Rate
1.73
Amount
155.18
4369.10
43.69
4412.79
661.92
5074.71
507.47
507.45
Dismantling of spindle fire hydrant including stacking of useful materials within 50

metres lead.
Description
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 Nos
Cost of each
Say
Unit
Quantity
day
day
day
1.50
1.00
4.00
Rate
487.00
448.00
368.00
Amount
730.50
448.00
1472.00
2650.50
26.51
2677.01
401.55
3078.56
307.85
307.85
15.55
Dismantling of cement concrete platform along with curtain walls and base concrete
etc. including stacking of useful materials near the site and disposal of unserviceable
materials within 50 metres lead :
15.55.1
120 x 120 cm (outside to outside)
Code
Description
Unit
Quantity
0114
0115
9999
0114
0115
Detail of cost for one platform

Dismantling cement concrete 1:5:10
4.00x0.35x0.12m =0.168cum
0.80x0.80x0.075m =0.048cum
4.00x0.20x0.30m =0.24cum
4.00x0.10x0.20m =0.088cum
Dismantling 40 mm C.C. flooring 1:2:4
1.00x1.00x0.04m =0.04cum
LABOUR
Beldar
Coolie
Sundries
Beldar
Coolie
day
day
L.S.
day
day
0.19
0.12
0.39
0.35
0.30
934
Rate
368.00
368.00
1.73
368.00
368.00
Amount
69.92
44.16
0.67
128.80
110.40
Code
Description
Unit
Quantity
9999
0114
0115
9999
Sundries
Beldar
Coolie
TOTAL
TOTAL
Cost of each
Say
L.S.
day
day
L.S.
0.91
0.06
0.03
0.13
Unit
Quantity
day
day
L.S.
day
day
L.S.
day
day
L.S.
0.31
0.19
0.65
0.50
0.42
1.30
0.13
0.06
0.39
Unit
Quantity
15.55.2
Code
0114
0115
9999
0114
0115
9999
0114
0115
9999
15.55.3
Code
Rate
1.73
368.00
368.00
1.73
Amount
1.57
22.08
11.04
0.22
388.86
3.89
392.75
58.91
451.66
451.65

Description
5.80x0.35x0.12m =0.243cum
0.80x1.70x0.075m =0.102cum
5.80x0.20x0.30m =0.348cum
6.20x0.10x0.20m =0.124cum
1.90x1.00x0.04m =0.08cum
LABOUR
Beldar
Coolie
Sundries
Beldar
Coolie
Sundries
Beldar
Coolie
TOTAL
TOTAL
Cost of each
Say
Rate
368.00
368.00
1.73
368.00
368.00
1.73
368.00
368.00
1.73
Amount
114.08
69.92
1.12
184.00
154.56
2.25
47.84
22.08
0.67
596.52
5.97
602.49
90.37
692.86
692.85

Description
8.00x0.35x0.12m =0.336cum
2.80x0.80x0.075m =0.168cum
935
Rate
Amount
Code
0114
0115
9999
0114
0115
9999
0114
0115
9999
15.56
Code
0114
0115
0101
9999
15.57
Description
8.00x0.20x0.30m =0.48cum
8.40x0.10x0.20m =0.168cum
3.00x1.00x0.04m =0.12cum
LABOUR
Beldar
Coolie
Sundries
Beldar
Coolie
Sundries
Beldar
Coolie
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
day
day
L.S.
day
day
L.S.
day
day
L.S.
0.44
0.28
0.91
0.69
0.59
1.56
0.19
0.09
0.52
Rate
368.00
368.00
1.73
368.00
368.00
1.73
368.00
368.00
1.73
Amount
161.92
103.04
1.57
253.92
217.12
2.70
69.92
33.12
0.90
844.21
8.44
852.65
127.90
980.55
980.55
Dismantling old plaster or skirting raking out joints and cleaning the surface for
plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Description
LABOUR
Beldar
Coolie
Bhisti
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
day
L.S.
0.36
0.08
0.07
1.43
Rate
368.00
368.00
407.00
1.73
Amount
132.48
29.44
28.49
2.47
192.88
1.93
194.81
29.22
224.03
22.40
22.40
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false
ceiling including disposal of unserviceable surplus material and stacking of
serviceable material with in 50 meters lead as directed by Engineer-in-charge.
Code
Description
Unit
Quantity
0112
0114

LABOUR
Carpenter 2nd class
Beldar
day
day
0.20
0.30
936
Rate
448.00
368.00
Amount
89.60
110.40
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
5.38
15.58
Code
0128
0139
0114
0103
0114
0040
0039
0041
15.59
Rate
1.73
Amount
9.31
209.31
2.09
211.40
31.71
243.11
24.31
24.30
Demolishing R.C.C. work by mechanical means and stockpiling at designated

locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking
serviceable and unserviceable material separately including cutting reinforcement
bars.
Description
Details of cost for 1 cum
LABOUR
Mate
Labour for operating pneumatic tools
Beldar
Labour for cutting reinforcement bars.
Beldar
MACHINERY
Air compressor 250 cfm with two leads for
pneumatic cutters/ hammers.
Tractor with trolley .
Joint cutting machine with 2-3 blades
TOTAL
TOTAL
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
day
0.03
407.00
12.21
day
day
0.50
0.50
407.00
368.00
203.50
184.00
day
day
0.50
0.50
448.00
368.00
224.00
184.00
day
day
day
0.13
0.05
0.13
1500.00
1250.00
750.00
187.50
62.50
93.75
1151.46
11.51
1162.97
174.45
1337.42
1337.40
Dismantling of flexible pavement (bituminous courses) by mechanical means and

disposal of dismantled material up to a lead of 1 kilometre, as per direction of
Engineer-in-charge.
Code
Description
Unit
Quantity
0128
0114

LABOUR
Mate
Beldar
MACHINERY
Tractor with trolley .
day
day
0.01
0.30
407.00
368.00
4.07
110.40
day
0.05
1250.00
59.38
0039
937
Rate
Amount
Code
Description
Unit
Quantity
0038
Tractor with ripper attachment.

TOTAL
TOTAL
Cost of 1 cum
Say
day
0.00
15.60
Code
2264
Rate
1100.00
Amount
2.20
176.05
1.76
177.81
26.67
204.48
204.50
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to
approved municipal dumping ground or as approved by Engineer-in-charge, beyond
50 m initial lead, for all leads including all lifts involved.
Description
Carriage of Rubbish
TOTAL
TOTAL
Cost of 1 cum
Say
938
Unit
Quantity
cum
1.00
Rate
103.77
Amount
103.77
103.77
1.04
104.81
15.72
120.53
120.55
SUB HEAD : 16.0
ROAD WORK
939
16.1
Code
0128
0115
0114
0003
0113
9999
0003
0113
9999
16.2
Code
0101
0003
0113
Preparation and consolidation of sub grade with power road roller of 8 to 12

tonne capacity after excavating earth to an average of 22.5 cm depth, dressing
to camber and consolidating with road roller including making good the
undulations etc. and re-rolling the sub grade and disposal of surplus earth
with lead upto 50 metres.
Description
Details of cost for 100sqm.
(A) preparation of subgrade.
Earth work in excavation including dressing
etc. 100sqm.x22.5cm (average depth) =
22.5cum.
LABOUR
Mate
Coolie
Beldar
Hire charges of Diesel Road Roller - 8 to
10 tonne
Chowkidar
Sundries
(B) Conslidation of subgrade
Roller charges (one roller does 1860 sqm.
of conosolidation of sub - grade with road
roller of 8 to 12 tonne capacity including
making good the undulations etc. with earth
or quarry spoils etc. and rerolling the
subgrade
10 tonne
Chowkidar
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
Unit
Quantity
Rate
Amount
day
day
day
1.80
18.00
0.27
407.00
368.00
368.00
732.60
6624.00
99.36
day
day
L.S.
0.054
0.054
6.76
2200.00
368.00
1.73
118.80
19.87
11.69
day
day
L.S.
0.054
0.054
6.76
2200.00
368.00
1.73
118.80
19.87
11.69
7756.68
77.57
7834.25
1175.14
9009.39
90.09
90.10
Extra for compaction of earth work in embankment under optimum moisture

conditions to give at least 95% of the maximum dry density (proctor density).
Description
LABOUR
(Extra to item No.2.3 in Earth work)
Bhisti
Roller charges (one roller does 1860sqm. of
consolidation per day of 8 hours and uses
18 litres diesel)
10 tonne
Chowkidar
SUB HEAD : 16- ROAD WORK
941
Unit
Quantity
Rate
Amount
day
0.17
407.00
69.19
day
day
0.008
0.008
2200.00
368.00
17.60
2.94
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 10 cum.
Cost per cum.
Say
L.S.
1.43
Unit
Quantity
cum
0.10
1000.00
100.00
cum
0.65
1000.00
650.00
cum
0.25
1150.00
287.50
cum
1.00
112.79
112.79
1150.29
11.50
1161.79
174.27
1336.06
1336.05
Unit
Quantity
cum
0.10
1000.00
100.00
cum
0.65
1150.00
747.50
cum
0.25
1150.00
287.50
cum
1.00
112.79
112.79
1247.79
12.48
1260.27
189.04
1449.31
1449.30
16.3
Supplying and stacking at site.
16.3.1
90 mm to 45 mm size stone aggregate
Code
2901
2902
0291
2206
16.3.2
Code
2902
0291
0292
2206
Description
MATERIAL
nominal size
nominal size
nominal size
Carriage of Stone aggregate 40 mm nominal
size and above
Total
Total
Cost for 1 cum
Say
Rate
1.73
Rate
Amount
2.47
92.20
0.92
93.12
13.97
107.09
10.70
10.70
Amount
63 mm to 45 mm size stone aggregate

Description
MATERIAL
nominal size
nominal size
nominal size
size and above
Total
Total
Cost for 1 cum
Say
942
Rate
Amount
16.3.3
Code
0291
0292
0293
2206
16.3.4
Code
2908
2260
16.3.5
Code
2909
2260
53 mm to 22.4 mm size stone aggregate

Description
MATERIAL
nominal size
nominal size
nominal size
size and above
Total
Total
Cost for 1 cum
Say
Unit
Quantity
Rate
Amount
cum
0.05
1150.00
57.50
cum
0.30
1150.00
345.00
cum
0.65
1250.00
812.50
cum
1.00
112.79
112.79
1327.79
13.28
1341.07
201.16
1542.23
1542.25
Over burnt (Jhama) brick aggregate 120 mm to 40 mm

Description
MATERIAL
Over burnt (Jhama) Brick Aggregate:
120 mm to 40 mm size
Carriage of Brick aggregate
Total
Total
Cost for 1 cum
Say
Unit
Quantity
cum
cum
1.00
1.00
Rate
450.00
112.79
Amount
450.00
112.79
562.79
5.63
568.42
85.26
653.68
653.70

Description
MATERIAL
Over burnt (Jhama) Brick Aggregate:
90 mm to 40 mm size
Total
Total
Cost for 1 cum
Say
943
Unit
Quantity
cum
cum
1.00
1.00
Rate
470.00
112.79
Amount
470.00
112.79
582.79
5.83
588.62
88.29
676.91
676.90
16.3.6
Code
2910
2911
2903
2202
16.3.7
Code
2911
2903
2904
2202
2267
Stone screening 13.2 mm nominal size (Type A)

Description
MATERIAL
Stone chippings/ screenings 12.5/ 13.2 mm
nominal size
nominal size
Stone chippings/ screenings 4.75 mm
nominal size
nominal size
TOTAL
TOTAL
Cost for one cum.
Say
Quantity
Rate
Amount
cum
0.05
1200.00
60.00
cum
0.80
1200.00
960.00
cum
0.15
1150.00
172.50
cum
1.00
103.77
103.77
1296.27
12.96
1309.23
196.38
1505.61
1505.60
Stone screening 11.2 mm nominal size (Type B)

Description
MATERIAL
nominal size
nominal size
Stone chippings/ screenings 150 micron
nominal size
nominal size
Carriage of Stone dust
TOTAL
TOTAL
Cost for one cum.
Say
16.3.8
Red bajri
Code
Description
0304
2311
Unit

MATERIAL
Bajri
Carriage of Red bajri
TOTAL
TOTAL
Cost for one cum.
Say
944
Unit
Quantity
Rate
cum
0.10
1200.00
120.00
cum
0.75
1150.00
862.50
cum
0.15
1150.00
172.50
cum
cum
0.85
0.15
103.77
103.77
88.20
15.57
1258.77
12.59
1271.36
190.70
1462.06
1462.05
Unit
Quantity
cum
cum
1.00
1.00
Rate
1200.00
103.77
Amount
Amount
1200.00
103.77
1303.77
13.04
1316.81
197.52
1514.33
1514.35
16.3.9
Code
0114
0115
0979
2241
Good earth
Description
Excavation :
LABOUR
Beldar
Coolie
Royalty for good earth
Carriage of Good earth
by mechanical transport upto 5 km lead
TOTAL
TOTAL
Cost per cum.
Say
16.3.10
Moorum
Code
Description
0810
2265
16.4
Code
0114
0115
0101
0003
0113

MATERIAL
Moorum
Carriage of Moorum
TOTAL
TOTAL
Cost for one cum.
Say
Unit
Quantity
day
day
cum
cum
0.177
0.167
1.00
1.00
Rate
368.00
368.00
30.00
129.71
Amount
65.14
61.46
30.00
129.71
286.31
2.86
289.17
43.38
332.55
332.55
Unit
Quantity
cum
cum
1.00
1.00
Rate
450.00
103.77
Amount
450.00
103.77
553.77
5.54
559.31
83.90
643.21
643.20
Laying, spreading and compacting stone aggregate of specified sizes to WBM

specifications in uniform thickness, hand picking, rolling with 3 wheeled road
/ vibratory roller 8-10 tonne capacity in stages to proper grade and camber,
applying and brooming requisite type of screening / binding material to fill up
interstices of coarse aggregate, watering and compacting to the required
density .
Description
LABOUR
Beldar
Coolie
Bhisti
Roller charges (one roller does 30 cum
18 litres of diesel oil).
10 tonne
Chowkidar
945
Unit
Quantity
Rate
Amount
day
day
day
0.26
0.26
0.26
368.00
368.00
407.00
95.68
95.68
105.82
day
day
0.033
0.033
2200.00
368.00
72.60
12.14
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost for 1 cum
Say
L.S.
2.73
Rate
1.73
Amount
4.72
386.64
3.87
390.51
58.58
449.09
449.10
16.5
Laying water bound macadam sub-base with brick aggregate and binding
material, earth etc. including screening, sorting and spreading to template
and consolidation with light power road-roller etc. complete.(payment for brick
aggregate and moorum etc. to be made separately)
16.5.1
Code
0114
0115
0101
0003
0113
9999
16.5.2
Code
0114
0115
0101
0003
0113
Description
LABOUR
Beldar
Coolie
Bhisti
Roller charges (one roller does 230cum.
18 litres of diesel oil)
10 tonne
Chowkidar
Sundries
TOTAL
TOTAL
Cost for one cum.
Say
Unit
Quantity
Rate
Amount
day
day
Day
0.35
0.26
0.18
368.00
368.00
407.00
128.80
95.68
73.26
day
day
L.S.
0.004
0.004
2.73
2200.00
368.00
1.73
8.80
1.47
4.72
312.73
3.13
315.86
47.38
363.24
363.25

Description
LABOUR
Beldar
Coolie
Bhisti
Roller charges (one roller does 230cum.
10 tonne
Chowkidar
946
Unit
Quantity
Rate
Amount
day
day
day
0.35
0.26
0.18
368.00
368.00
407.00
128.80
95.68
73.26
day
day
0.004
0.004
2200.00
368.00
8.80
1.47
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost for one cum.
Say
L.S.
2.73
Rate
1.73
Amount
4.72
312.73
3.13
315.86
47.38
363.24
363.25
16.6
Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling
complete including preparation of the surface and rolling.
16.6.1
With road roller/ hand roller
Code
0304
2311
0114
0101
0003
0113
Description
Details of cost for 6 mm thick and 100 sqm
area = 0.60 cum.
(A) Supplying and stacking of Red bajri at site.
MATERIAL
Bajri
Carriage of Red bajri
(B) Spreading of red bajri
LABOUR
Beldar
Bhisti
Roller charges (one roller does 1860sqm.
10 tonne
Chowkidar
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
Unit
Quantity
Rate
Amount
cum
cum
0.60
0.60
1200.00
103.77
720.00
62.26
day
day
0.54
0.54
368.00
407.00
198.72
219.78
day
day
0.054
0.054
2200.00
368.00
118.80
19.87
1339.43
13.39
1352.82
202.92
1555.74
15.55
15.55
16.7
Brick edging in full brick width and half brick depth including excavation,
refilling and disposal of surplus earth lead upto 50 metres.
16.7.1
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Code
2602
2201
Description
Unit
Details of cost for 10m.

MATERIAL
including 12% wastage
Carriage of Bricks
947
Quantity
Rate
Amount
1000 Nos
0.16
4500.00
720.00
1000 Nos
0.16
276.72
44.27
Code
0123
0124
0115
9999
9999
Description
LABOUR
Coolie
Removal of rubbish
Sundries
TOTAL
TOTAL
Cost for 10m.
Cost per m.
Say
Unit
Quantity
day
day
day
L.S.
L.S.
0.17
0.17
0.35
17.94
8.97
Rate
487.00
448.00
368.00
1.73
1.73
Amount
82.79
76.16
128.80
31.04
15.52
1098.58
10.99
1109.57
166.44
1276.01
127.60
127.60
16.8
Brick edging laid lengthwise with half brick depth including excavation, refilling
and disposal of surplus earth lead upto 50 metres :
16.8.1
Code
2602
2201
0123
0124
0115
9999
16.9
Code
0114
0115
Description
Unit
Details of cost for 10m.

MATERIAL
Carriage of Bricks
LABOUR
Coolie
Removal of rubbish
TOTAL
TOTAL
Cost for 10m.
Cost per m.
Say
Quantity
Rate
Amount
1000 Nos
0.049
4500.00
220.50
1000 Nos
0.049
276.72
13.56
day
day
day
L.S.
0.04
0.04
0.09
4.16
487.00
448.00
368.00
1.73
19.48
17.92
33.12
7.20
311.78
3.12
314.90
47.24
362.14
36.21
36.20
Scarifying metalled (water-bound) road surface including disposal of rubbish,

lead upto 50 m and consolidation of the aggregate received from scarifying
with power road roller of 8 to 10 tonne capacity.
Description
LABOUR
Beldar
Coolie
Consolidation of scarified material
100sqm.x50mm = 5cum +
Less 20% wastage = 1 cum.
= 4 cum.
948
Unit
Quantity
day
day
1.35
1.08
Rate
368.00
368.00
Amount
496.80
397.44
Code
Description
0003

10 tonne
Chowkidar
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
0113
9999
16.10
Code
2.6.1
0286
2260
16.3.8
16.3.10
0114
0115
0101
0003
0113
9999
0003
Unit
Quantity
day
day
L.S.
0.132
0.132
5.46
Rate
2200.00
368.00
1.73
Amount
290.40
48.58
9.45
1242.67
12.43
1255.10
188.27
1443.37
14.43
14.45
Making bajri path including preparation of subgrade, supplying and laying brick
aggregate of 50 mm nominal size 7.5 cm deep with blinding material consisting
of 12 mm moorum and 12 mm red bajri consolidated with road roller.
Description
Earth work in excavation including dressing
etc.
100x0.075=7.5cum.
(Rate as per item no.2.6.1 of S.H. Earth
work)
Collection and stacking of brick aggregate
53mm nominal size 100x0.075 =7.50cum.
Brick Aggregate (Single size) : 50 mm
nominal size
Supply staking Red Bajri
100x0.012= 1.2 cum
SH: Road Work
Collection and stacking of moorum at site
100x0.012 = 1.20cum.
SH: Road Work
Spreading and consolidation of brick
aggregate and blinding material etc.
LABOUR
Beldar
Coolie
Bhisti
10 tonne
Chowkidar
Sundries
Spreading of red bajri, watering and rolling
10 tonne
949
Unit
Quantity
Rate
Amount
cum
7.50
125.95
944.63(A)
cum
cum
7.50
7.50
750.00
112.79
5625.00
845.94
cum
1.20
cum
1.20
643.20
771.84(A)
day
day
day
1.95
2.63
1.35
368.00
368.00
407.00
717.60
967.84
549.45
day
day
L.S.
0.135
0.135
20.15
2200.00
368.00
1.73
297.00
49.68
34.86
day
0.054
2200.00
118.80
1514.35 1817.22(A)
Code
Description
Unit
Quantity
0113
Chowkidar
TOTAL
i.e. on (12759.73 - 3533.69) = 9226.04
TOTAL
- 3533.69) = 9318.30
Cost for 100 sqm.
Cost per sqm.
Say
day
0.054
16.11
Code
1158
2216
0123
0124
0114
0115
9999
Rate
368.00
Amount
19.87
12759.73
92.26
12851.99
1397.75
14249.74
142.49
142.50
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface
complete.
Description
MATERIAL
Stone for pitching 15 cm x 22.5 cm
2.25x2245/1000 = 5.05 t
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
Unit
Quantity
Rate
Amount
cum
2.25
636.00
1431.00
tonne
5.05
92.24
465.81
day
day
day
day
L.S.
1.08
1.08
2.15
1.61
6.76
487.00
448.00
368.00
368.00
1.73
525.96
483.84
791.20
592.48
11.69
4301.98
43.02
4345.00
651.75
4996.75
499.67
499.65
16.12
Dry brick pitching half brick thick in drains including supply of bricks and
preparing the surface complete :
16.12.1
Code
2602
2201
0123
0124
Description
Unit

MATERIAL
Carriage of Bricks
LABOUR
950
Quantity
Rate
Amount
1000 Nos
1000 Nos
0.645
0.645
4500.00
276.72
2902.50
178.48
day
day
0.40
0.40
487.00
448.00
194.80
179.20
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
day
1.08
Rate
368.00
Amount
397.44
3852.42
38.52
3890.94
583.64
4474.58
447.45
447.45
16.13
Cutting road and making good the same including supply of extra quantities of
materials i.e. aggregate, moorum screening, red bajri and labour required.
16.13.1
bituminous portion
Code
16.3.3
16.3.8
16.3.10
2911
2202
0309
2211
0114
0115
0114
0115
0114
0115
0101
0114
0115
Description
Details of cost for 1.08cum. (road 6 metres
wide, 0.6 metre length wise and 0.30m
(average depth) volume = 1.08 cum).
MATERIAL
Supplying and stacking stone aggregate
53mm to 24 mm nominal size at site.
SH: Road Work
Supplying and stacking red bajri at site
SH: Road Work
Supplying and stacking moorum at site
SH: Road Work
nominal size
nominal size
Paving bitumen VG-10 of approved quality
Carriage of Tar bitumen
LABOUR
For cutting road and taking out soling and
metalling including sorting and screening.
Beldar
Coolie
Relaying soling stone 3.6x0.15=0.54cum.
Beldar
Coolie
Relaying road metal with extra quantity
and consolidation to 0.10m, thickness
3.6x0.10=0.36cum.
Beldar
Coolie
Bhisti
Painting two coats, 3.6sqm. including labour
for spreading grit
Beldar
Coolie
951
Unit
Quantity
Rate
Amount
cum
0.09
1542.25
138.80(A)
cum
0.023
1514.35
34.83(A)
cum
0.022
643.20
14.15(A)
cum
0.092
1200.00
110.40
cum
tonne
tonne
0.092
0.011
0.011
103.77
29600.00
103.77
9.55
325.60
1.14
day
day
0.96
0.48
368.00
368.00
353.28
176.64
day
day
0.24
0.24
368.00
368.00
88.32
88.32
day
day
day
0.71
0.48
0.10
368.00
368.00
407.00
261.28
176.64
40.70
day
day
0.48
0.48
368.00
368.00
176.64
176.64
Code
Description
Unit
Quantity
9999
Barrier, chowkidar, sprayman, mate, etc.

TOTAL
i.e. on (2242.87 - 187.78) = 2055.09
TOTAL
- 187.78) = 2075.64
Cost for 1.08 cum.
Cost per cum.
Say
L.S.
40.43
16.13.2
Code
16.3.3
16.3.8
16.3.10
0114
0115
0114
0115
0114
0115
0101
9999
Rate
1.73
Amount
69.94
2242.87
20.55
2263.42
311.35
2574.77
2384.04
2384.05
Water bound macadam

Description
Details of cost for 0.90cum.
Consider a road 6 metres wide and 0.6m.
lengthwise and 0.25m cm average depth
=0.90cum.
MATERIAL
Supplying and stacking stone aggregate
53mm to 24mm nominal size at site.
SH: Road Work
SH: Road Work
Supplying and stacking moorum at site.
SH: Road Work
LABOUR
For cutting road and taking out soling and
metalling including sorting and screening.
Beldar
Coolie
For relaying soling stone 3.6x0.15=0.54cum.
Beldar
Coolie
For relaying road metal with extra quantity
and consolidation to 0.10m thickness
- 3.6x0.10=0.36cum.
Beldar
Coolie
Bhisti
Barrier and chowkidar etc.
TOTAL
i.e. on (1116.47 - 187.78) = 928.69
TOTAL
- 187.78) = 937.98
Cost for 0.90 cum.
Cost per cum.
Say
952
Unit
Quantity
Rate
Amount
cum
0.09
1542.25
138.80(A)
cum
0.023
1514.35
34.83(A)
cum
0.022
643.20
14.15(A)
day
day
0.48
0.24
368.00
368.00
176.64
88.32
day
day
0.24
0.24
368.00
368.00
88.32
88.32
day
day
day
L.S.
0.48
0.48
0.10
53.82
368.00
368.00
407.00
1.73
176.64
176.64
40.70
93.11
1116.47
9.29
1125.76
140.70
1266.46
1407.17
1407.15
16.14
Code
0286
2260
16.3.8
16.3.10
0114
0115
Cutting bajri paths and making good the same including supply of extra
quantities of brick aggregate, moorum and red bajri required.
Description
10x0.075=0.75cum.
MATERIAL
Supplying and stacking 50mm brick
aggregate at site(extra quantity)
nominal size
SH: Road
Supplying and stacking moorum at site
SH: Road
LABOUR
For cutting, sorting out, spreading and
consolidation of aggregate
Beldar
Coolie
TOTAL
i.e. on (1176.58 - 129.45) = 1047.13
TOTAL
on all except (A) i.e. on (1187.05 - 129.45)
= 1057.60
Cost for 10 sqm.
Cost per sqm.
Say
Unit
Quantity
Rate
Amount
cum
cum
0.19
0.19
750.00
112.79
142.50
21.43
cum
0.06
1514.35
90.86(A)
cum
0.06
643.20
38.59(A)
day
day
1.60
0.80
368.00
368.00
588.80
294.40
1176.58
10.47
1187.05
158.64
1345.69
134.56
134.55
16.15
Supplying at site :
16.15.1
R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarse
sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or
6mm bar nibs wherever required as per direction of Engineer-in- charge (cost
of earth works in excavation, concrete works in foundation to be paid separately).
Code
Description
Unit
Details of cost for 10 posts = 0.336cum

Cubical contents of one post
Area bottom A1 = (15+12.5)/2 x8.75+x
3.14 x(6.25)
=120.31+61.38=181.69sqcm.
Area bottom A2 = (10+7.5)/2 x6.25+x
3.14 x(3.75) sqm
= 54.68+22.08 = 76.76 sqcm.
(A1A2)^ = 118.10sqcm
A1+A2+(A1A2))^ = 0.03766 sqm
Volume = (1.05)/3x0.03766 = 0.01316 cum
=0.0132cum.
953
Quantity
Rate
Amount
Code
4.1.2
0114
0101
0123
0124
0128
5.22.2
5.9.1
0367
2209
0983
2261
0114
0101
0155
0115
0101
9999
9999
9999
9977
9999
Description
Volume of lower and square portion
(16.5x16.5x75) / 100 = 0.0204cum.
Total volume = 0.0132+0.0204 cum
= 0.0336 cum.
Qty. for 10 post
= 0.0336x10
= 0.336cum.
Cement concrete 1:1.5:3 (1 Cement : 1.5
12.5mm nominal size)
Rate as per item no 4.1.2 of S.H. Concrete
Work.
Extra labour for laying cement concrete in
RCC work
Beldar
Bhisti
Mate
M.S. Reinforcement
6mm dia. bars
10x4x1.88m = 75.20m+
10x9x0.50m =45.00m =
120.20m
120.20m@0.22kg/m =26.44kg.
SH: Reinforced cement concrete work
Centering and shuttering
Rate as per item No.5.9.1 of SH : Reinforced
cement concrete work
6mm C.Plaster 1:2 (1 Cement : 2 fine sand)
Details of cost for 9.88 sqm.
(0.072)/10x9.88 = 0.071
Carriage of Cement
Fine sand (zone IV)
Carriage of Fine sand (1 part badarpur
sand : 2 parts jamuna sand)
LABOUR
Beldar
Bhisti
Mason (average)
Coolie
Bhisti
Hire and running charges of mixer
Extra for removing burr, cleaning with wire
brushes, pock making with pointed tool etc.
complete
Carriage of RCC posts
Wooden plugs or 6mm bar nibs
954
Unit
Quantity
Rate
Amount
cum
0.336
day
day
day
day
day
0.034
0.067
0.013
0.013
0.013
kg
26.44
66.70 1763.55(A)
sqm
6.99
193.95 1355.71(A)
tonne
tonne
cum
0.05
0.05
0.07
5700.00
92.24
760.00
285.00
4.61
53.20
cum
0.07
103.77
7.26
day
day
day
day
day
L.S.
0.05
0.02
0.64
0.80
0.27
1.95
368.00
407.00
467.00
368.00
407.00
1.73
18.40
8.14
298.88
294.40
109.89
3.37
L.S.
L.S.
L.S.
L.S.
13.26
11.57
53.82
12.22
1.73
1.73
1.73
1.73
22.94
20.02
93.11
21.14
5924.65 1990.68(A)
368.00
407.00
487.00
448.00
407.00
12.51
27.27
6.33
5.82
5.29
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
i.e. on (6430.91 - 5109.94) = 1320.97
TOTAL
- 5109.94) = 1334.18
Cost for 0.336 cum
Cost for one cum
Say
L.S.
13.52
16.15.2
Code
1021
2314
16.16
Code
1030
1028
9977
0103
Rate
1.73
Amount
23.39
6430.91
13.21
6444.12
200.13
6644.25
19774.55
19774.55
Welded steel wire fabric of required width having rectangular mesh painted
with two or more coats of enamel paint of approved shade over a coat of primer
(Priming & Painting to be paid for separately).
Description
Details of cost for 27 sqm (209.25 kg).
MATERIAL
Steel wire fabric 0.9m wide
rectangular mesh 75x25mm size weight not
less than 7.75kg/sqm. 30x0.9 = 27sqm
Hard drawn steel wire fabric
Carriage of Barbed wire
7.75x27=209.25kg=0.209tonne
TOTAL
TOTAL
Cost for 209.25 kg
Cost per kg.
Say
Unit
Quantity
sqm
tonne
27.00
0.209
Rate
400.00
92.24
Amount
10800.00
19.28
10819.28
108.19
10927.47
1639.12
12566.59
60.05
60.05
Supplying and fixing turn buckles and straining bolts for barbed wire fencing.
Description
Details of cost for one set
MATERIAL
Galvanised steel turn buckles
Straining bolts
Carriage of turn buckles and straining bolts
Labour for fixing straining bolts and turn
buckles
TOTAL
TOTAL
Cost per set
Say
955
Unit
Quantity
Rate
Amount
each
each
L.S.
1.00
1.00
2.73
15.00
65.00
1.73
15.00
65.00
4.72
day
0.10
448.00
44.80
129.52
1.30
130.82
19.62
150.44
150.45
16.17
Fencing with R.C.C. post placed at required distance, embedded in cement

concrete blocks, every 15th post, last but one end post and corner post shall be
strutted on both sides and end post one side only, provided with horizontal
lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres
(minimum), between the two posts fitted and fixed with G.I. staples on wooden
plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post
(cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :Payment to be made per metre cost of total length of barbed wire used.
16.17.1
With G.I. barbed wire
Code
1029
2314
9999
0123
0124
0114
0102
0103
9999
Description
Unit
Details of cost for 30m

MATERIAL
G.I. barbed wire
30x9 = 270m +
10x6.32 = 63m
Total = 333m
333m @9.38kg/100m =31.24kg = 0.31q
Galvanised steel barbed wire
G.I. staples or binding wire
LABOUR
Labour for fixing costs in line, fixing and
stretching wire
Beldar
Sundries
TOTAL
TOTAL
Cost for 333m
Cost per m
Say
Quantity
Rate
Amount
quintal
tonne
L.S.
0.31
0.03
49.40
4800.00
92.24
1.73
1488.00
2.77
85.46
day
day
day
day
day
L.S.
0.12
0.12
0.50
0.50
0.50
13.52
487.00
448.00
368.00
487.00
448.00
1.73
58.44
53.76
184.00
243.50
224.00
23.39
2363.32
23.63
2386.95
358.04
2744.99
8.24
8.25
16.18
Fencing with angle iron post placed at required distance embedded in cement
concrete blocks, every 15th post, last but one end post and corner post shall be
strutted on both sides and end post on one side only and provided with
horizontal lines and two diagonals interwoven with horizontal wires, of barbed
wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and
fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth
work and concrete work to be paid for separately). Payment to be made per
metre cost of total length of barbed wire used.
16.18.1
With G.I. barbed wire
Code
Description
Unit
Details of cost for 30m

MATERIAL
G.I. barbed wire
956
Quantity
Rate
Amount
Code
1029
2314
16.16
9999
0123
0124
0114
0102
0103
16.19
Code
1007
2205
0103
0114
0103
0114
Description
30x9 = 270.00m
2x10x(12+32)1/2 = 63.24
= 333.24m
333.24m @ 9.38kg/100m
=31.26 kg say 0.31 q
Galvanised steel barbed wire
Supplying and fixing Turn buckle & staple
SH: Road Work
G.I. staples
Labour for fixing posts in line and fixing
and stretching wire:
Beldar
TOTAL
i.e. on (3844.52 - 1504.50) = 2340.02
TOTAL
= 2363.42
Cost for 333.24m
Cost per m
Say
Unit
Quantity
quintal
tonne
0.31
0.031
each set
L.S.
10.00
49.40
day
day
day
day
day
0.12
0.12
0.50
0.50
0.50
Rate
4800.00
92.24
Amount
1488.00
2.86
150.45 1504.50(A)
1.73
85.46
487.00
448.00
368.00
487.00
448.00
58.44
53.76
184.00
243.50
224.00
3844.52
23.40
3867.92
354.51
4222.43
12.67
12.65
Supplying at site Angle iron post & strut of required size including bottom to be
split and bent at right angle in opposite direction for 10 cm length and drilling
holes upto 10 mm dia. etc. complete.
Description
Unit
Details of cost for 1 qunital

MATERIAL
M.S. angle = 1.00 qtl.
Add 5% wastage = 0.05 qtl.
Total = =1.05 qtl
and R.S. joists
Carriage of Steel
LABOUR
Beldar
For spotting, bending of angle and drilling
holes etc. :
Beldar
957
Quantity
Rate
Amount
quintal
tonne
1.05
0.105
3775.00
92.24
3963.75
9.69
day
day
0.75
0.50
448.00
368.00
336.00
184.00
day
day
1.00
1.00
448.00
368.00
448.00
368.00
Code
Description
Unit
Quantity
9999
Sundries such as drilling bit etc.

TOTAL
TOTAL
Cost for 1 qunital
Cost of one kg
Say
L.S.
19.76
16.20
Code
0123
0124
0114
0102
0103
9999
9999
16.21
Rate
1.73
Amount
34.18
5343.62
53.44
5397.06
809.56
6206.62
62.06
62.05
Welded steel wire fabric fencing with posts of specified material and of standard
design placed and embedded in cement concrete blocks 45x45x 60 cm of mix
1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size),
every 15th post, last but one end post and corner post shall be strutted on both
sides and end post on one side only and struts embedded in cement concrete
blocks 70x45x50 cm of the same mix, provided with welded steel wire fabric
fixed between the posts fitted and fixed with G.I. staples on wooden plugs or
tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel wire
fabric, painting, earth work in excavation and concrete to be paid for separately).
Description
Details of cost for 30 metres i.e.30x1.20
=36.00sqm
Labour for fixing posts in line fixing and
stretching - welded wire fabric :
Beldar
G.I. staple or binding wire
Sundries
TOTAL
TOTAL
Cost for 36 sqm
Cost per sqm
Say
Unit
Quantity
day
day
day
day
day
L.S.
L.S.
0.12
0.12
0.50
0.50
0.50
53.82
53.82
Rate
487.00
448.00
368.00
487.00
448.00
1.73
1.73
Amount
58.44
53.76
184.00
243.50
224.00
93.11
93.11
949.92
9.50
959.42
143.91
1103.33
30.64
30.65
Engraving letters in hard stone
Code
Description
Unit
Quantity
0126
Details of cost for 6 letters 8 cm height

LABOUR
For Engraving stoneMason (for ornamental stone work) 1st class
day
0.38
958
Rate
487.00
Amount
185.06
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 6 letters of 8cm heights
Cost per cm. height per letter
Say
L.S.
6.76
16.22
Code
1151
0114
9977
16.23
Code
4.1.2
Rate
1.73
Amount
11.69
196.75
1.97
198.72
29.81
228.53
4.76
4.75
Providing and fixing 15x15x90 cm boundary stone of hard stone with top 30 cm
chisel dressed on all four sides including top (cost of excavation, refilling and
concrete etc. to be paid for separately).
Description
Details of cost for one stone
Boundry stone top chisel dressed
15x15x90 cm
Labour for fixing
Beldar
Carriage to site
TOTAL
TOTAL
Cost of each.
Say
Unit
Quantity
Rate
Amount
each
1.00
70.00
70.00
day
L.S.
0.12
4.16
368.00
1.73
44.16
7.20
121.36
1.21
122.57
18.39
140.96
140.95
Providing and fixing 15 cm dia at top, 20 cm at bottom and 90 cm high precast

reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size) boundary stone as per standard design, including
finishing smooth with cement mortar 1:3 (1 cement : 3 fine sand) (cost of
excavation, refilling and concreting to be paid for separately).
Description
(i) Cement concrete 1:1:3 (1 cement : 1
20mm nominal size)
Volume of frustum of cone:
L/3 x [A1+A2+sqrt(A1A2)] = 0.825/3 x
[0.095+
0.075 + sqrt(0.095 x 0.075)]x3.142
=0.01882
(A) Volume of hemi sphere:
x 4 /3 x PI x r =
x(4/ 3)x(22/7)x0.075=0.00100 (B)
Total volume = A+B = 0.01982 Say 0.02cum
Work.
(ii) Extra for laying cement concerte in
RCC work
959
Unit
Quantity
cum
0.02
Rate
Amount
5924.65
118.49(A)
Code
0114
0101
0123
0124
0128
5.22.1
5.9.1
0367
2209
0983
2261
0114
0101
9999
9999
0155
0115
0101
9999
9999
0114
9977
Description
LABOUR
Beldar
Bhisti
Mate
(iii) M.S. reinforcement6mm dia. bar
5.99 metre =5.99x0.22 =1.32kg.
Rate as per item no. 5.22.1 of SH : RCC work
(iv) Centering and shuttering1/2x3.142 (0.19+0.15)x0.825 =0.441 +
3.142/4(0.19) =0.028 +
1/2x4x3.142(0.075) = 0.035
= 0.504
Say 0.50sqm.
(v) 6mm cement plaster 1:3 (1 Cement :
3 fine sand)1/2x3.142 (0.19+0.15)x0.825 =0.44 +
3.142/4(0.19) =0.028 +
1/2x4x3.142(0.075) = 0.035
= 0.504
Say 0.50sqm.
MATERIAL
Carriage of Cement
Fine sand (zone IV)
Carriage of Fine sand (1 part badarpur sand :
2 parts jamuna sand)
Labour for mortar
Beldar
Bhisti
Sundries
Labour for plaster
Mason (average)
Coolie
Bhisti
Extra for removing burr
Scaffolding, sundries etc.
(vi) Labour for fixing
Beldar
Carriage to site
TOTAL
i.e. on (435.36 - 288.47) = 146.89
TOTAL
= 148.36
Cost of each.
Say
960
Unit
Quantity
Rate
Amount
day
day
day
day
day
0.002
0.004
0.0008
0.0008
0.0008
368.00
407.00
487.00
448.00
407.00
0.74
1.63
0.39
0.36
0.33
kg
1.32
55.30
73.00
sqm
0.50
193.95
96.98
tonne
tonne
cum
0.0018
0.0018
0.0385
5700.00
92.24
760.00
10.26
0.17
29.26
cum
0.0385
103.77
4.00
day
day
L.S.
L.S.
0.0027
0.0002
0.10
0.05
368.00
407.00
1.73
1.73
0.99
0.08
0.17
0.09
day
day
day
L.S.
L.S.
0.026
0.038
0.046
0.68
0.60
467.00
368.00
407.00
1.73
1.73
12.14
13.98
18.72
1.18
1.04
day
L.S.
0.12
4.16
368.00
1.73
44.16
7.20
435.36
1.47
436.83
22.25
459.08
459.10
16.24
Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5
coarse sand : 3 graded stone aggregate 20 mm nominal size) kilometre stone as
per standard design, including finishing smooth in 1:3 cement mortar (1 cement
: 3 fine sand) but excluding the cost of earth work, concrete in foundation,
painting and lettering etc. which shall be paid for separately.
16.24.1
35x111x25 cm size
Code
4.1.2
0114
0101
0123
0124
0128
5.22.1
5.9.1
0367
2209
0983
Description
(i) Cement concrete 1:1.5:3 (1 cement :1.5
Coarse sand :3 graded stone aggregate
20mm nominal size) in Kilometre stone
0.35x0.25x0.835m = 0.073
0.37x0.27x0.10m = 0.010
1/2x22/7x(0.175)x0.25m = 0.012
= 0.095cum
Say 0.10cum.
Work.
(ii) Extra for laying cement concrete in RCC
work
Beldar
Bhisti
Mate
(iii) M.S. reinforcement0.10cum @48.06kg/cum. =4.806kg.
Say 4.81kg.
Rate as per item no. 5.22.1 of
SH : Reinforced cement concrete work
(iv) Centering and shuttering(0.35+2x0.25)x0.835 = 0.710 sqm
0.35x0.25 = 0.088sqm
(0.37+2x0.27)x0.10 = 0.091sqm
2x0.37x0.01 = 0.007 sqm
2x2x0.25x0.1 = 0.010sqm
1/2x3.142/4x(0.35) = 0.048sqm
1/2x0.35x0.25x3.142 = 0.138sqm.
= 1.092sqm. Say 1.09 sqm
Rate as per item No.5.9.1 of
3 fine sand)Qty. as per centering and shuttering
= 1.092sqm
0.35x0.835 = 0.292sqm
0.37x0.10 = 0.037sqm
1/2x3.142/4x(0.35)= 0.048sqm
2x0.37x0.01 = 0.007 sqm
= 1.476 sqm Say 1.48 sqm
Carriage of Cement
Fine sand (zone IV)
961
Unit
Quantity
Rate
Amount
cum
0.10
5924.65
592.47(A)
day
day
day
day
day
0.01
0.02
0.004
0.004
0.004
368.00
407.00
487.00
448.00
407.00
3.68
8.14
1.95
1.79
1.63
kg
4.81
55.30
265.99(A)
sqm
1.09
193.95
211.41(A)
tonne
tonne
cum
0.054
0.054
0.011
5700.00
92.24
760.00
307.80
4.98
8.36
Code
Description
2261
Carriage of Fine sand (1 part badarpur sand

: 2 parts jamuna sand)
Labour for mortar
Beldar
Bhisti
Sundries
Labour for plaster
Mason (average)
Coolie
Bhisti
Beldar
Carriage to site
TOTAL
i.e. on (1647.57 - 1069.87) = 577.70
TOTAL
= 583.48
Cost per stone
Say
0114
0101
9999
9999
0155
0115
0101
9999
9999
0114
9977
16.24.2
Code
4.1.2
0114
0101
0123
0124
0128
5.22.1
Unit
Quantity
Rate
Amount
cum
0.011
103.77
1.14
day
day
L.S.
L.S.
0.008
0.0007
0.03
0.13
368.00
407.00
1.73
1.73
2.94
0.28
0.05
0.22
day
day
day
L.S.
L.S.
0.075
0.111
0.136
1.95
1.82
467.00
368.00
407.00
1.73
1.73
35.03
40.85
55.35
3.37
3.15
day
L.S.
0.20
13.52
368.00
1.73
73.60
23.39
1647.57
5.78
1653.35
87.52
1740.87
1740.85
50x152.5x25 cm size
Description
20mm nominal size)
0.50x0.25x1.145m = 0.143cum. +
0.52x0.27x0.13m = 0.018cum. +
1/2x22/7x(0.25)x0.25m = 0.025cum.
= 0.186 cum.
Say 0.19cum.
Work.
work
Beldar
Bhisti
Mate
(iii) M.S. reinforcement0.19cum @48.06kg/cum. =9.131kg.
Say 9.13 kg.
962
Unit
Quantity
Rate
Amount
cum
0.19
day
day
day
day
day
0.019
0.038
0.008
0.008
0.008
368.00
407.00
487.00
448.00
407.00
6.99
15.47
3.90
3.58
3.26
kg
9.13
55.30
504.89(A)
5924.65 1125.68(A)
Code
5.9.1
0367
2209
0983
2261
0114
0101
9999
9999
0155
0115
0101
9999
9999
0114
9977
Description
1/2x(0.25)x3.142 = 0.098
3.142(0.25)x(0.25) =0.196
(0.52+2x0.27)x0.13 =0.138
2x0.52x0.01 =0.10
2x2x0.25x0.01 =0.010
1x0.50x0.25 =0.125
=1.722sqm. Say 1.72 sqm
= 1.722sqm. +
0.50x1.145 = 0.572 +
0.52x0.13 = 0.068sqm. +
1/2x(0.25)x3.142 = 0.098 +
2x0.52x001 = 0.010
= 2.470sqm Sq. 2.47 sqm.
MATERIAL
Carriage of Cement
Fine sand (zone IV)
Labour for mortar
Beldar
Bhisti
Sundries
Labour for plaster
Mason (average)
Coolie
Bhisti
Beldar
Carriage to site
TOTAL
i.e. on (3025.05 - 1964.16) = 1060.89
TOTAL
= 1071.50
Cost per stone
Say
963
Unit
Quantity
Rate
Amount
sqm
1.72
193.95
333.59(A)
tonne
tonne
cum
0.09
0.09
0.20
5700.00
92.24
760.00
513.00
8.30
152.00
cum
0.20
103.77
20.75
day
day
L.S.
L.S.
0.013
0.001
0.52
0.26
368.00
407.00
1.73
1.73
4.78
0.41
0.90
0.45
day
day
day
L.S.
L.S.
0.126
0.185
0.227
3.38
2.86
467.00
368.00
407.00
1.73
1.73
58.84
68.08
92.39
5.85
4.95
day
L.S.
0.20
13.52
368.00
1.73
73.60
23.39
3025.05
10.61
3035.66
160.73
3196.39
3196.40
16.24.2
Code
4.1.2
0114
0101
0123
0124
0128
5.22.1
5.9.1
0367
2209
0983
2261
0114
0101
9999
9999
0155
0115
0101
9999
50x152.5x25 cm size
Description
20mm nominal size)
0.35x0.18x0.835m = 0.0526 cum. +
0.37x0.20x0.10m = 0.0074 cum.
= 0.060 cum.
Work.
work
Beldar
Bhisti
Mate
(iii) M.S. reinforcement0.06cum @48.06kg/cum. =2.8836 kg.
Say 2.88 kg.
(0.37+2x0.20)x0.10 = 0.077 sqm
2x0.35x0.18 = 0.126 sqm
2x0.37x0.01 = 0.007sqm
2x2x0.18x0.01 = 0.007sqm
= 0.810 sqm
Rate as per item No.5.9.1 of
= 0.810sqm
0.35x0.835 = 0.292sqm
0.37x0.10 =0.037sqm
2x0.37x0.01 =0.007sqm
= 1.146 sqm Say 1.15sqm
MATERIAL
Carriage of Cement
Fine sand (zone IV)
Labour for mortar
Beldar
Bhisti
Sundries
Labour for plaster
Mason (average)
Coolie
Bhisti
964
Unit
Quantity
Rate
Amount
cum
0.06
5924.65
355.48(A)
day
day
day
day
day
0.006
0.012
0.0024
0.0024
0.0024
368.00
407.00
487.00
448.00
407.00
2.21
4.88
1.17
1.08
0.98
kg
2.88
55.30
159.26(A)
sqm
0.81
193.95
157.10(A)
tonne
tonne
cum
0.042
0.042
0.009
5700.00
92.24
760.00
239.40
3.87
6.84
cum
0.009
103.77
0.93
day
day
L.S.
L.S.
0.006
0.0006
0.26
0.13
368.00
407.00
1.73
1.73
2.21
0.24
0.45
0.22
day
day
day
L.S.
0.058
0.086
0.105
1.56
467.00
368.00
407.00
1.73
27.09
31.65
42.74
2.70
Code
Description
Unit
Quantity
9999

Beldar
Carriage to site
TOTAL
i.e. on (1102.94 - 671.84) = 431.10
TOTAL
= 435.41
Cost of each
Say
L.S.
1.30
1.73
2.25
day
L.S.
0.10
13.52
368.00
1.73
36.80
23.39
1102.94
0114
9977
16.25
Code
0309
2211
2910
2202
0370
2200
0128
0114
0115
0130
0138
0114
0128
0114
0115
0113
0101
Rate
Amount
4.31
1107.25
65.31
1172.56
1172.55
Surface dressing on new surface with paving bitumen of grade VG - 10 of

approved quality using 2.25 kg of bitumen per sqm with 1.65 cum of stone
chippings 13.2 mm nominal size per 100 sqm of road surface, including
consolidation with road roller of 6 to 8 tonne capacity etc. complete:
Description
MATERIAL
Bitumen S-90@2.25kg per sqm. =225 kg
= 0.225 tonne.
Stone aggregate 13.2mm nominal size @
1.65cum. per 100sqm.
nominal size
nominal size
Steam coal for heating bitumen @2 quintal
per tonne of bitumen = 2x0.225=0.450q
Coal (steam)
Carriage of steam coal
Labour for cleaning the road surface,
heating and spraying bitumen and aggregate
(a) For cleaning :
Mate
Beldar
Coolie
(b) For heating and spraying bitumen :
Mistry
Beldar
(c) For screening and spreading aggregate :
Mate
Beldar
Coolie
(d) Consolidation Charges
Chowkidar
Bhisti
965
Unit
Quantity
Rate
Amount
tonne
tonne
0.225
0.225
29600.00
103.77
6660.00
23.35
cum
1.65
1200.00
1980.00
cum
1.65
103.77
171.22
quintal
tonne
0.45
0.045
400.00
118.59
180.00
5.34
day
day
day
0.11
1.40
1.40
407.00
368.00
368.00
44.77
515.20
515.20
day
day
day
0.08
0.11
0.93
487.00
407.00
368.00
38.96
44.77
342.24
day
day
day
0.11
0.93
1.55
407.00
368.00
368.00
44.77
342.24
570.40
day
day
0.27
0.11
368.00
407.00
99.36
44.77
Code
Description
0003

10 tonne
Hire charges of Coaltar Boiler 900 to
1400 litres
Hire charges of Coaltar Sprayer
(e) Misc:
Wire brush
Soft brush
Brooms and gunny bags
Sundries
TOTAL
TOTAL
Cost for 100 Sqm.
Cost per Sqm.
Say
0001
0007
0364
0365
9999
9999
16.26
Code
0309
2211
2910
2202
0370
2200
0128
0114
0115
0130
0138
0114
0128
0114
Unit
Quantity
Rate
Amount
day
0.11
2200.00
242.00
day
day
0.12
0.11
800.00
250.00
96.00
27.50
each
each
L.S.
L.S.
0.11
0.32
6.76
6.76
20.00
18.00
1.73
1.73
2.20
5.76
11.69
11.69
12019.43
120.19
12139.62
1820.94
13960.56
139.60
139.60
Surface dressing on new surface in two coats with bitumen of grade VG -10 of
approved quality using 1.8 kg of bitumen per sqm with 1.5 cum of stone chippings
13.2 mm nominal size per 100 sqm of road surface for first coat and 1.1 kg. of
bitumen per sqm with 1.00 cu. metre of stone chippings 11.2 mm nominal size
per 100 sqm of road surface for second coat, including consolidation of each
coat separately with road roller of 6 to 8 tonne capacity etc. complete.
Description
MATERIAL
Bitumen S-90/A-90 @
1.8kg/sqm.=180kg.=0.18 tonne
nominal size
nominal size
Steam coal for heating bitumen @2 qunital
per tonne
Coal (steam)
Labour for cleaning the road surface, heating
and spraying bitumen and aggregate
(a) For cleaning :
Mate
Beldar
Coolie
Mistry
Beldar
Mate
Beldar
966
Unit
Quantity
Rate
Amount
tonne
tonne
0.18
0.18
29600.00
103.77
5328.00
18.68
cum
1.50
1200.00
1800.00
cum
1.50
103.77
155.65
quintal
tonne
0.36
0.036
400.00
118.59
144.00
4.27
day
day
day
0.11
1.40
1.40
407.00
368.00
368.00
44.77
515.20
515.20
day
day
day
0.08
0.11
1.38
487.00
407.00
368.00
38.96
44.77
507.84
day
day
0.27
0.85
407.00
368.00
109.89
312.80
Code
Description
Unit
Quantity
0115
Coolie
Chowkidar
Bhisti
10 tonne
Hire charges of Coaltar Boiler 900 to 1400 litres
(e) Misc:
Wire brush
Soft brush
Sundries
Second Coat
MATERIAL
Bitumen S-90/A-90 @ 1.10kg per sqm =
110kg.=0.11 tonne
nominal size
nominal size
Steam coal for heating bitumen @2 qunital
per tonne of bitumen
Coal (steam)
and spraying bitumen and aggregate
(a) For cleaning and brushing loose chips:
Mate
Coolie
Mistry
Beldar
Mate
Beldar
Coolie
Chowkidar
Bhisti
10 tonne
1400 litres
(e) Misc:
Wire brush
(with thick wire)
Soft brush
day
0.85
368.00
312.80
day
day
0.11
0.11
368.00
407.00
40.48
44.77
day
day
day
0.11
0.12
0.11
2200.00
800.00
250.00
242.00
96.00
27.50
each
each
L.S.
L.S.
0.11
0.32
6.76
16.38
20.00
18.00
1.73
1.73
2.20
5.76
11.69
28.34
tonne
0.11
29600.00
3256.00
cum
tonne
1.00
0.11
1200.00
103.77
1200.00
11.41
cum
1.00
103.77
103.77
quintal
tonne
0.22
0.022
400.00
118.59
88.00
2.61
day
day
0.06
0.97
407.00
368.00
24.42
356.96
day
day
day
0.05
0.07
0.75
487.00
407.00
368.00
24.35
28.49
276.00
day
day
day
0.07
0.62
0.62
407.00
368.00
368.00
28.49
228.16
228.16
day
day
0.15
0.06
368.00
407.00
55.20
24.42
day
day
0.06
0.07
2200.00
250.00
132.00
17.50
day
0.06
800.00
48.00
each
0.03
20.00
0.60
each
0.09
18.00
1.62
0113
0101
0003
0001
0007
0364
0365
9999
9999
0309
2911
2211
2202
0370
2200
0128
0115
0130
0138
0114
0128
0114
0115
0113
0101
0003
0007
0001
0364
0365
967
Rate
Amount
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost for two coats per 100sqm.
Cost per Sqm.
Say
L.S.
9.49
16.27
Code
0309
2911
2211
2202
0370
2200
0128
0114
0115
0130
0138
0114
0128
0114
0115
0113
0101
0003
0007
0001
Rate
1.73
Amount
16.42
16504.15
165.04
16669.19
2500.38
19169.57
191.69
191.70
Surface dressing on old surface with hot bitumen of grade VG - 10 of approved

quality using 1.95 kg of bitumen per sqm with 1.50 cum of stone chippings 11.2
mm nominal size per 100 sqm of road surface, including consolidation with
road roller of 6 to 8 tonne capacity, etc. complete.
Description
MATERIAL
Bitumen 1.95kg./sqm.= 195kg. or 0.195t
nominal size
@ 1.50cum. per 100 sqm.
nominal size
Steam coal for heating bitumen @2 quintal
per tonne of bitumen
Coal (steam)
and spraying bitumen and aggregate etc.
(a) For cleaning :
Mate
Beldar
Coolie
Mistry
Beldar
Mate
Beldar
Coolie
Chowkidar
Bhisti
10 tonne
1400 litres
(e) Misc:
Brushes etc. for cleaning
968
Unit
Quantity
Rate
Amount
tonne
0.195
29600.00
5772.00
cum
1.50
1200.00
1800.00
tonne
0.195
103.77
20.23
cum
1.50
103.77
155.65
quintal
tonne
0.39
0.039
400.00
118.59
156.00
4.63
day
day
day
0.06
0.49
0.97
407.00
368.00
368.00
24.42
180.32
356.96
day
day
day
0.05
0.06
0.69
487.00
407.00
368.00
24.35
24.42
253.92
day
day
day
0.66
0.51
0.51
407.00
368.00
368.00
268.62
187.68
187.68
day
day
0.15
0.06
368.00
407.00
55.20
24.42
day
day
0.06
0.06
2200.00
250.00
132.00
15.00
day
0.06
800.00
48.00
Code
Description
0364
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
0365
9999
9999
Unit
Quantity
Rate
Amount
each
0.05
20.00
1.00
each
L.S.
L.S.
0.12
2.73
5.33
18.00
1.73
1.73
2.16
4.72
9.22
9708.60
97.09
9805.69
1470.85
11276.54
112.76
112.75
16.28
Surface dressing one coat on new surface with bitumen of specified grade at a
rate of 1.95 kg/sqm of surface area with 1.5 cum of stone chippings 13.2 mm
nominal size per 100 sqm of road surface, including consolidation with road
roller of 6 to 8 tonne capacity , etc. complete :
16.28.1
Using bitumen emulsion (minimum 50% bitumen content- RS grade conforming

to IS : 8887)
Code
0310
2211
2910
2202
0128
0114
0115
0130
0138
0114
0128
0114
0115
0113
0101
0003
0007
Description
MATERIAL
Bitumen emulsion
nominal size
@1.50 cum. per 100 sqm. = 1.50cum
nominal size
heating and spraying bitumen and
aggregate :
(a) For cleaning :
Mate
Beldar
Coolie
(b) For Spraying bitumen emulsion :
Mistry
Beldar
Mate
Beldar
Coolie
Chowkidar
Bhisti
10 tonne
(e) Misc:
969
Unit
Quantity
Rate
Amount
tonne
tonne
0.195
0.195
26395.00
103.77
5147.03
20.23
cum
1.50
1200.00
1800.00
cum
1.50
103.77
155.65
day
day
day
0.11
1.40
1.40
407.00
368.00
368.00
44.77
515.20
515.20
day
day
day
0.07
0.10
1.00
487.00
407.00
368.00
34.09
40.70
368.00
day
day
day
0.11
0.85
0.85
407.00
368.00
368.00
44.77
312.80
312.80
day
day
0.27
0.27
368.00
407.00
99.36
109.89
day
day
0.11
0.10
2200.00
250.00
242.00
25.00
Code
Description
0364
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
0365
9999
9999
Unit
Quantity
Rate
Amount
each
0.11
20.00
2.20
each
L.S.
L.S.
0.32
6.76
9.49
18.00
1.73
1.73
5.76
11.69
16.42
9823.56
98.24
9921.80
1488.27
11410.07
114.10
114.10
16.29
Surface dressing one coat on old surface with bitumen of specified grade at the
rate of 1.22 kg/ sqm of surface area with 1.10 cum of stone chippings 11.2 mm
nominal size per 100 sqm of road surface, including consolidation with road
roller of 6 to 8 tonne capacity etc. complete :
16.29.1
Using bitumen emulsion (minimum 50% bitumen content- RS grade conforming

to IS : 8887)
Code
0310
2211
2911
2202
0128
0114
0115
0130
0138
0114
0128
0114
0115
0113
0101
Description
MATERIAL
Bitumen emulsion @1.22 kg per Sqm. =122
kg. or 0.122 tonne
Bitumen emulsion
Stone chippings 11.2mm nominal size @
1.10cum. per 100 sqm
nominal size
nominal size
aggregate :
(a) For cleaning :
Mate
Beldar
Coolie
(b) For Spraying bitumen emulsion :
Mistry
Beldar
Mate
Beldar
Coolie
Chowkidar
Bhisti
970
Unit
Quantity
Rate
Amount
tonne
tonne
0.122
0.122
26395.00
103.77
3220.19
12.66
cum
1.10
1200.00
1320.00
cum
1.10
103.77
114.15
day
day
day
0.06
0.49
0.97
407.00
368.00
368.00
24.42
180.32
356.96
day
day
day
0.05
0.06
0.63
487.00
407.00
368.00
24.35
24.42
231.84
day
day
day
0.07
0.62
0.62
407.00
368.00
368.00
28.49
228.16
228.16
day
day
0.15
0.15
368.00
407.00
55.20
61.05
Code
Description
0003

10 tonne
(e) Misc:
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
0007
0364
0365
9999
9999
Unit
Quantity
Rate
Amount
day
day
0.06
0.06
2200.00
250.00
132.00
15.00
each
0.11
20.00
2.20
each
L.S.
L.S.
0.32
2.73
5.33
18.00
1.73
1.73
5.76
4.72
9.22
6279.27
62.79
6342.06
951.31
7293.37
72.93
72.95
16.30
Providing and applying tack coat using hot straight run bitumen of grade VG 10, including heating the bitumen, spraying the bitumen with mechanically
operated spray unit fitted on bitumen boiler, cleaning and preparing the existing
road surface as per specifications :
16.30.1
On W.B.M. @ 0.75 Kg / sqm
Code
2916
2211
0370
2200
0364
0365
9999
0007
9999
0128
0114
0114
0114
Description
Unit

MATERIAL
Paving Asphalt VG -10 of approved quality
Coal (steam)
MATERIAL
Wire brush
(with thick wire)
Soft brush
Gunny bags
Sundries
LABOUR
(a) For cleaning :
Mate
Beldar
(b) For heating bitumen:
Beldar
(c) For applying tack coat:
Beldar
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
971
Quantity
Rate
Amount
tonne
tonne
quintal
tonne
0.075
0.075
0.15
0.015
29600.00
103.77
400.00
118.59
2220.00
7.78
60.00
1.78
each
0.05
20.00
1.00
each
L.S.
day
L.S.
0.12
7.80
0.03
9.10
18.00
1.73
250.00
1.73
2.16
13.49
7.50
15.74
day
day
0.06
1.46
407.00
368.00
24.42
537.28
day
0.19
368.00
69.92
day
0.47
368.00
172.96
3134.03
31.34
3165.37
474.81
3640.18
36.40
36.40
16.30.2
Code
2916
2211
0370
2200
0364
0365
9999
0007
9999
0128
0114
0114
0114
On bituminous surface @ 0.50 Kg / sqm

Description
Unit

MATERIAL
Coal (steam)
MATERIAL
Wire brush
(with thick wire)
Soft brush
Gunny bags
Sundries
LABOUR
(a) For cleaning :
Mate
Beldar
Beldar
(c) For applying tack coat:
Beldar
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
Quantity
Rate
Amount
tonne
tonne
quintal
tonne
0.05
0.05
0.10
0.01
29600.00
103.77
400.00
118.59
1480.00
5.19
40.00
1.19
each
0.05
20.00
1.00
each
L.S.
day
L.S.
0.12
7.80
0.03
7.80
18.00
1.73
250.00
1.73
2.16
13.49
7.50
13.49
day
day
0.06
1.46
407.00
368.00
24.42
537.28
day
0.19
368.00
69.92
day
0.47
368.00
172.96
2368.60
23.69
2392.29
358.84
2751.13
27.51
27.50
16.31
Providing and applying tack coat using bitumen emulsion conforming to IS:
8887, using emulsion pressure distributer including preparing the surface &
cleaning with mechanical broom.
16.31.1
With rapid setting bitumen emulsion
16.31.1.1
On W.B.M / W.M.M. @ 0.4kg/sqm
Code
7382
2211
0075
0058
0061
0128
Description
MATERIAL
Bitumen emulsion rapid setting (R.S.)
confirming to IS : 8887-1995
MACHINERY
Road sweeper (Mechamical Broom) @
1250 sqm. Per hour.
Air compressor
Emulsion Pressure Distributor @
1750 sqm per hour
LABOUR
Mate
972
Unit
Quantity
Rate
Amount
tonne
tonne
1.40
1.40
25425.00
103.77
35595.00
145.28
hour
hour
2.80
2.80
300.00
200.00
840.00
560.00
hour
2.00
800.00
1600.00
day
0.08
407.00
32.56
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost for 3500 sqm.
Cost per Sqm.
Say
day
2.00
Unit
Quantity
tonne
tonne
0.875
0.875
25425.00
103.77
22246.88
90.80
hour
hour
2.80
2.80
300.00
200.00
840.00
560.00
hour
2.00
800.00
1600.00
day
day
0.08
2.00
407.00
368.00
32.56
736.00
26106.24
261.06
26367.30
3955.10
30322.40
8.66
8.65
Unit
Quantity
tonne
tonne
1.40
1.40
25654.00
103.77
35915.60
145.28
hour
hour
2.80
2.80
300.00
200.00
840.00
560.00
hour
2.00
800.00
1600.00
16.31.1.2
Code
7382
2211
0075
0058
0061
0128
0114
Description
MATERIAL
Bitumen emulsion rapid setting (R.S.)
MACHINERY
1250 sqm. Per hour.
Air compressor
1750 sqm per hour
LABOUR
Mate
Beldar
TOTAL
TOTAL
Cost for 3500 sqm.
Cost per Sqm.
Say
With medium setting bitumen emulsion
16.31.2.1
On W.B.M / W.M.M. @ 0.4kg/sqm
7742
2211
0075
0058
0061
368.00
Amount
736.00
39508.84
395.09
39903.93
5985.59
45889.52
13.11
13.10
On bituminous surface @ 0.25kg/sqm
16.31.2
Code
Rate
Description
MATERIAL
Bitumen emulsion medium setting (M.S.)
MACHINERY
1250 sqm. Per hour.
Air compressor
1750 sqm per hour
973
Rate
Rate
Amount
Amount
Code
0128
0114
16.31.2.2
Code
7742
2211
0075
0058
0061
0128
0114
Description
LABOUR
Mate
Beldar
TOTAL
TOTAL
Cost for 3500 sqm.
Cost per Sqm.
Say
Unit
Quantity
Rate
day
day
0.08
2.00
Unit
Quantity
tonne
tonne
0.875
0.875
25654.00
103.77
22447.25
90.80
hour
hour
2.80
2.80
300.00
200.00
840.00
560.00
hour
2.00
800.00
1600.00
day
day
0.08
2.00
407.00
368.00
32.56
736.00
26306.61
263.07
26569.68
3985.45
30555.13
8.73
8.75
407.00
368.00
Amount
32.56
736.00
39829.44
398.29
40227.73
6034.16
46261.89
13.21
13.20
On bituminous surface @ 0.25kg/sqm

Description
MATERIAL
MACHINERY
1250 sqm. Per hour.
Air compressor
1750 sqm per hour
LABOUR
Mate
Beldar
TOTAL
TOTAL
Cost for 3500 sqm.
Cost per Sqm.
Say
Rate
Amount
16.32
2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of 13.2
mm size and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot
bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively,
including a tack coat with hot straight run bitumen, including consolidation with
road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately).
16.32.1
With paving Asphalt grade VG - 10 heated and then mixed with solvent at the
rate of 70 grams per kg of asphalt
Code
Description
Unit

Asphalt 80/100
(i) Hot bitumen @52kg.per cum. of stone
chippings 1.8cum. of 13.2mm nominal size
chippings.
974
Quantity
Rate
Amount
Code
2916
2211
2914
2342
2910
2911
2202
0370
2200
0128
0114
0115
0114
0130
0114
0113
0101
0003
0001
0023
0364
0365
9999
Description
(ii) Hot bitumen @56kg. per cum. of stone
chippings.
Bitumen :52xl.8+56x0.9=144kg. or 0.144
tonne
MATERIAL
Paving Asphalt VG 10 of approved quality
Solvent 70gms/kg. for 0.144 t = 10.08kg.
Solvent
Carriage of solvent/ Diesel.
nominal size
@1.80cum. per 100 sqm
nominal size
nominal size
Steam coal for heating bitumen @ 2
qunitals per tonne of bitumen =
2x0.144=0.288q
Coal (steam)
aggregate :
(a) For cleaning :
Mate
Beldar
Coolie
Beldar
(c) For screening and spreading premixed
aggregate :
Mistry
Beldar
Chowkidar
(at barrier for night watch and for road
roller)
Bhisti
10 tonne
1400 litres
Hot Bitumen mixer 0.5 cum i/c hand cart
(e) Misc:
Wire brush
(with thick wire)
Soft brush
975
Unit
Quantity
tonne
tonne
0.144
0.144
29600.00
103.77
4262.40
14.94
kilogram
quintal
10.08
0.10
25.00
10.38
252.00
1.04
cum
1.80
1200.00
2160.00
cum
0.90
1200.00
1080.00
cum
2.70
103.77
280.18
0.288
0.0288
400.00
118.59
115.20
3.42
day
day
day
0.08
1.40
1.40
407.00
368.00
368.00
32.56
515.20
515.20
day
0.57
368.00
209.76
day
day
0.19
5.00
487.00
368.00
92.53
1840.00
day
0.27
368.00
99.36
day
0.11
407.00
44.77
day
0.11
2200.00
242.00
day
day
0.13
0.04
800.00
3500.00
104.00
140.00
each
0.11
20.00
2.20
each
L.S.
0.32
6.76
18.00
1.73
5.76
11.69
quintal
tonne
Rate
Amount
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
L.S.
9.49
16.32.2
Code
7309
2211
2910
2911
2202
0370
2200
0128
0114
0115
0114
0130
0114
0113
Rate
1.73
Amount
16.42
12040.63
120.41
12161.04
1824.16
13985.20
139.85
139.85
With paving Asphalt grade VG - 30 with no solvent

Description
Asphalt 60/70
chippings.
chippings 0.90cum. of 11.2mm nominal
size chippings.
Bitumen :52xl.8+56x0.9=144kg. or 0.144
tonne
MATERIAL
Paving Asphalt VG-30 of approved quality
nominal size
@1.80cum. per 100sqm.
nominal size
@0.90cum. per 100sqm
nominal size
Steam coal for heating of bitumen @2
quintals per tonne of bitumen
=2x0.144=0.288q
Coal (steam)
aggregate :
(a) For cleaning :
Mate
Beldar
Coolie
Beldar
aggregate :
Mistry
Beldar
Chowkidar
976
Unit
Quantity
tonne
tonne
0.144
0.144
30516.00
103.77
4394.30
14.94
cum
1.80
1200.00
2160.00
cum
0.90
1200.00
1080.00
cum
2.70
103.77
280.18
0.288
0.0288
400.00
118.59
115.20
3.42
day
day
day
0.08
1.40
1.40
407.00
368.00
368.00
32.56
515.20
515.20
day
0.57
368.00
209.76
day
day
0.19
5.00
487.00
368.00
92.53
1840.00
day
0.27
368.00
99.36
quintal
tonne
Rate
Amount
Code
Description
Unit
Quantity
0101
0003
Bhisti
10 tonne
1400 litres
(e) Misc:
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
day
0.11
407.00
44.77
day
0.11
2200.00
242.00
day
day
0.13
0.04
800.00
3500.00
104.00
140.00
each
0.11
20.00
2.20
each
L.S.
L.S.
0.32
6.76
9.49
18.00
1.73
1.73
5.76
11.69
16.42
11919.49
119.19
12038.68
1805.80
13844.48
138.44
138.45
0001
0023
0364
0365
9999
9999
16.32.3
Code
7739
2211
2914
2342
2910
2911
2202
Rate
Amount
With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP: 53

Description
Asphalt 80/100
chippings.
chippings 0.90cum. of 11.2mm nominal
size chippings.
Modified Bitumen CRMB - 55 (Refinary
produced) :52xl.8+56x0.9=144kg. or 0.144
tonne
MATERIAL
Modified Bitumen Refinary produced
CRMB - 55
Solvent 70gms/kg. for 0.144 t = 10.08kg
Solvent
Stone chippings 13.2mm nominal size @
1.80cum. per 100sqm.
nominal size
@1.80cum. per 100sqm.
nominal size
nominal size
quintals per tonne of bitumen =
2x0.144=0.288q
977
Unit
Quantity
Rate
Amount
tonne
tonne
0.144
0.144
33548.00
103.77
4830.91
14.94
kilogram
quintal
10.08
0.10
25.00
10.38
252.00
1.04
cum
1.80
1200.00
2160.00
cum
0.90
1200.00
1080.00
cum
2.70
103.77
280.18
Code
Description
0370
2200
Coal (steam)
aggregate :
(a) For cleaning :
Mate
Beldar
Coolie
Beldar
aggregate :
Mistry
Beldar
Chowkidar
Bhisti
10 tonne
1400 litres
(e) Misc:
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
0128
0114
0115
0114
0130
0114
0113
0101
0003
0001
0023
0364
0365
9999
9999
Unit
quintal
tonne
Quantity
Rate
Amount
0.288
0.0288
400.00
118.59
115.20
3.42
day
day
day
0.08
1.40
1.40
407.00
368.00
368.00
32.56
515.20
515.20
day
0.57
368.00
209.76
day
day
0.19
5.00
487.00
368.00
92.53
1840.00
day
day
0.27
0.11
368.00
407.00
99.36
44.77
day
0.11
2200.00
242.00
day
day
0.13
0.04
800.00
3500.00
104.00
140.00
each
0.11
20.00
2.20
each
L.S.
L.S.
0.32
6.76
9.49
18.00
1.73
1.73
5.76
11.69
16.42
12609.14
126.09
12735.23
1910.28
14645.51
146.45
146.45
16.33
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of
13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot
bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively,
including a tack coat with hot straight run bitumen, including consolidation with
road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately).
16.33.1
With paving Asphalt grade VG - 10 heated and then mixed with solvent at the
rate of 70 grams per kg of asphalt
Code
Description
Unit

Paving Asphalt 80/100
chippings @2.25cum. of 13.2mm nominal
size chippings.
978
Quantity
Rate
Amount
Code
2916
2914
2211
2342
2910
2911
2202
0370
2200
0128
0114
0115
0114
0130
0114
0113
0101
0003
0001
0023
0364
0365
9999
9999
Description
(ii) Hot bitumen @56kg. per cum. of
aggregate @1.12cum. of 11.2mm nominal
size.
Bitumen :52x2.25+56x1.12= 180kg
MATERIAL
Solvent 0.07x180=12.60kg.
Solvent
nominal size
@1.80cum. per 100 sqm.
nominal size
nominal size
2.25+1.12=3.37 cum
=2x0.18=0.36q
Coal (steam)
aggregate :
(a) For cleaning :
Mate
Beldar
Coolie
Beldar
aggregate :
Mistry
Beldar
Chowkidar
Bhisti
10 tonne
1400 litres
(e) Misc:
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
979
Unit
Quantity
Rate
Amount
tonne
0.18
29600.00
5328.00
kilogram
tonne
quintal
12.6
0.18
0.126
25.00
103.77
10.38
315.00
18.68
1.31
cum
2.25
1200.00
2700.00
cum
1.12
1200.00
1344.00
cum
3.37
103.77
349.70
quintal
tonne
0.36
0.036
400.00
118.59
144.00
4.27
day
day
day
0.08
1.40
1.40
407.00
368.00
368.00
32.56
515.20
515.20
day
0.71
368.00
261.28
day
day
0.19
6.25
487.00
368.00
92.53
2300.00
day
day
0.27
0.11
368.00
407.00
99.36
44.77
day
0.11
2200.00
242.00
day
day
0.15
0.04
800.00
3500.00
120.00
140.00
each
0.11
20.00
2.20
each
L.S.
L.S.
0.32
6.76
9.49
18.00
1.73
1.73
5.76
11.69
16.42
14603.93
146.04
14749.97
2212.50
16962.47
169.62
169.60
16.33.2
Code
7309
2211
2910
2911
2202
0370
2200
0128
0114
0115
0114
0130
0114
0113
0101
0003
0001
0023
0364
0365
9999
9999
With paving Asphalt grade VG - 30 with no solvent

Description
size
aggregate@1.12cum. of 11.2mm nominal
size size Bitumen :52x2.25+50xl. 12= 180kg
MATERIAL
nominal size
nominal size
nominal size
2.25+1.12=3.37 cum.
Coal (steam)
and spraying bitumen and aggregate :
(a) For cleaning :
Mate
Beldar
Coolie
Beldar
(c) For cleaning, mixing and spreading
pre-mix aggregate :
Mistry
Beldar
1.05x0.18)/0.267 = 0.71 Nos.
Chowkidar
Bhisti
10 tonne
1400 litres
(e) Misc:
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
980
Unit
Quantity
Rate
Amount
tonne
tonne
0.18
0.18
30516.00
103.77
5492.88
18.68
cum
2.25
1200.00
2700.00
cum
1.12
1200.00
1344.00
cum
3.37
103.77
349.70
quintal
tonne
0.36
0.036
400.00
118.59
144.00
4.27
day
day
day
0.08
1.40
1.40
407.00
368.00
368.00
32.56
515.20
515.20
day
0.71
368.00
261.28
day
day
0.19
6.25
487.00
368.00
92.53
2300.00
day
day
0.27
0.11
368.00
407.00
99.36
44.77
day
0.11
2200.00
242.00
day
day
0.15
0.04
800.00
3500.00
120.00
140.00
each
0.11
20.00
2.20
each
L.S.
L.S.
0.32
6.76
9.49
18.00
1.73
1.73
5.76
11.69
16.42
14452.50
144.53
14597.03
2189.55
16786.58
167.86
167.85
16.33.3
Code
7739
2914
2211
2342
2910
2911
2202
0370
2200
0128
0114
0115
0114
0130
0114
0113
0101
0003
0001
0023
0364
With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP: 53

Description
MATERIAL
size chippings.
(ii) Hot bitumen @56kg. per cum. of
aggregate @1.12cum. of 11.2mm nominal
size.
52x2.25+56x1.12=180kg
CRMB - 55
Solvent 0.07x180=12.60kg
Solvent
nominal size
@2.25 cum. per 100sqm
nominal size
@1.12 cum. per 100sqm
nominal size
2.25+1.12=3.37 cum.+
=2x0.18=0.36q
Coal (steam)
and spraying bitumen and aggregate :
(a) For cleaning :
Mate
Beldar
Coolie
Beldar
aggregate :
Mistry
Beldar
Chowkidar
Bhisti
10 tonne
1400 litres
(e) Misc:
Wire brush
(with thick wire)
981
Unit
Quantity
Rate
Amount
tonne
0.18
33548.00
6038.64
kilogram
tonne
quintal
12.6
0.18
0.126
25.00
103.77
10.38
315.00
18.68
1.31
cum
2.25
1200.00
2700.00
cum
1.12
1200.00
1344.00
cum
3.37
103.77
349.70
quintal
tonne
0.36
0.036
400.00
118.59
144.00
4.27
day
day
day
0.08
1.40
1.40
407.00
368.00
368.00
32.56
515.20
515.20
day
0.71
368.00
261.28
day
day
0.19
6.25
487.00
368.00
92.53
2300.00
day
day
0.27
0.11
368.00
407.00
99.36
44.77
day
0.11
2200.00
242.00
day
day
0.15
0.04
800.00
3500.00
120.00
140.00
each
0.11
20.00
2.20
Code
Description
0365
9999
9999
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
16.34
Code
7742
2211
2911
2202
0130
0114
0113
0101
0003
0023
9999
Unit
Quantity
each
L.S.
L.S.
0.32
6.76
9.49
Rate
18.00
1.73
1.73
Amount
5.76
11.69
16.42
15314.57
153.15
15467.72
2320.16
17787.88
177.87
177.85
2 cm premix carpet surfacing with 2.4 cum of stone chippings 11.2 mm nominal
size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen content)
complying with IS : 8887, using 96 kg per cum of chippings, including consolidation
with road roller of 6 to 9 tonne capacity etc. complete.
Description
MATERIAL
Bitumen emulsion M.S. @ 96kg per cum.
of aggregate
96x2.4=230kg =0.230t
nominal size
@ 2.4cum. per 100 sqm
nominal size
LABOUR
(a) For mixing and spreading premix
aggregate :
Mistry
Beldar
(b) Consolidation Charges
Chowkidar
Bhisti
10 tonne
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
982
Unit
Quantity
Rate
Amount
tonne
tonne
0.23
0.23
25654.00
103.77
5900.42
23.87
cum
2.40
1200.00
2880.00
cum
2.40
103.77
249.04
day
day
0.19
3.54
487.00
368.00
92.53
1302.72
day
day
0.27
0.11
368.00
407.00
99.36
44.77
day
day
L.S.
0.11
0.04
9.49
2200.00
3500.00
1.73
242.00
140.00
16.42
10991.13
109.91
11101.04
1665.16
12766.20
127.66
127.65
16.35
Code
7742
2211
2911
2202
0130
0114
0113
0101
0003
9999
2.5 cm premix carpet surfacing with 3 cum of stone chippings 10 mm nominal size
per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen contents)
complying with IS : 8887, using 96 kg per cum of chippings of road surface, including
consolidation with road roller etc complete .
Description
MATERIAL
Bitumen emulsion M.S. @ 96kg per cum.
of aggregate
96x3 = 288 kg = 0.288 t
nominal size
@ 3.00 cum. per 100 sqm
nominal size
LABOUR
(a) For mixing and spreading premix
aggregate :
Mistry
Beldar
(b) Consolidation Charges
Chowkidar
Bhisti
10 tonne
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per Sqm.
Say
Unit
Quantity
Rate
Amount
tonne
tonne
0.288
0.288
25654.00
103.77
7388.35
29.89
cum
3.00
1200.00
3600.00
cum
3.00
103.77
311.31
day
day
0.19
4.10
487.00
368.00
92.53
1508.80
day
day
0.27
0.11
368.00
407.00
99.36
44.77
day
L.S.
0.11
9.49
2200.00
1.73
242.00
16.42
13333.43
133.33
13466.76
2020.01
15486.77
154.86
154.85
16.36
Providing and laying Bitumen Penetration Macadam with hard stone aggregate of
quality, size and grading as specified, with bitumen of suitable penetration grade,
including required key aggregate as specified, spreading coarse aggregate with
the help of self propelled/ tipper tail mounted aggregate spreader and applying
bitumen by a pressure distributor and then spreading key aggregate with the help
of aggregate spreader complete, including consolidation with road roller of
minimum 8 to 10 tonne capacity to achieve specified values of compaction and
surface accuracy :
16.36.1
For 50mm compacted thickness using coarse aggregate of size 50-20 mm graded
@ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10
sqm. With paving asphalt grade VG - 10 @ 50 kg/ 10 sqm.
Code
Description
Unit

MATERIAL
Taking stone aggregate 40mm = 45%
983
Quantity
Rate
Amount
Code
0293
0295
0297
1159
0295
0296
1159
2206
2202
2202
2267
2916
2211
0114
0114
0114
0114
0138
0114
0114
0114
0128
0001
0003
9999
Description
20mm = 44%
11.2mm = 8%
Stone dust = 3%
nominal size
nominal size
nominal size
Stone dust
nominal size
Stone Aggregate (Single size) : 12.5 mm
nominal size
Stone dust
Carriage of Stone aggregate 40 mm
nominal size and above
nominal size
i.e. 20mm
nominal size
@ 50kg/10 sqm.
(B) Labour:
Beldar
for spreading stone metal
Beldar
for hand packing
Beldar
dry rolling
Beldar
Bajri spreader
Beldar
for spreading key aggregate
Beldar
for spraying bitumen
Beldar
of power roller
Mate
(C) Machinery :
1400 litres
10 tonne
Misc. items as spray nozzle, joint paper,
coconut oil, country soap etc.
TOTAL
TOTAL
Cost for 370 Sqm.
Cost per sqm.
Say
984
Unit
Quantity
Rate
Amount
cum
9.99
1250.00
12487.50
cum
9.77
1300.00
12701.00
cum
cum
1.78
0.6
1300.00
865.00
2314.00
519.00
cum
2.33
1300.00
3029.00
cum
cum
2.66
0.56
1300.00
865.00
3458.00
484.40
cum
9.99
112.79
1126.79
cum
12.1
103.77
1255.60
cum
cum
tonne
4.44
1.16
1.85
103.77
103.77
29600.00
460.73
120.37
54760.00
tonne
1.85
103.77
191.97
day
16.67
368.00
6134.56
day
5.33
368.00
1961.44
day
2.67
368.00
982.56
day
1.33
368.00
489.44
day
day
0.67
1.33
407.00
368.00
272.69
489.44
day
6.67
368.00
2454.56
day
0.67
368.00
246.56
day
1.77
407.00
720.39
day
0.45
800.00
360.00
day
0.61
2200.00
1342.00
L.S.
351
1.73
607.23
108969.23
1089.69
110058.92
16508.84
126567.76
342.07
342.05
16.36.2
Code
2206
0292
0295
0297
0294
0296
0297
2916
2202
2211
0114
0114
0114
0114
0138
0114
0114
0114
0128
0001
0003
For 75 mm compacted thickness in two layers using stone aggregate of size 63-41
mm graded @ 0.90 cum per 10 sqm key aggregate of size 20.0 mm graded @ 0.18
cum per 10 sqm. With paving asphalt grade VG - 10 @ 68 kg/10 sqm.
Description
MATERIAL
Taking output as 300 sqm. for single layer.
Coarse agg. = 300/10x0.90 = 27 cum.
Key agg = 300/10x0.18 = 5.4 cum.
Bitumen = 300/10x68 = 2.04 t.
size and above
nominal size
nominal size
nominal size
nominal size
nominal size
nominal size
nominal size
LABOUR
Beldar
for spreading stone metal
Beldar
for hand packing
Beldar
dry rolling
Beldar
/Bajri spreader
Beldar
for spreading key aggregate
Beldar
for spraying bitumen
Beldar
road roller
Mate
MACHINERY
1400 litres
10 tonne
985
Unit
Quantity
Rate
Amount
cum
8.10
112.79
913.62
cum
8.10
1150.00
9315.00
cum
14.58
1300.00
18954.00
cum
4.32
1300.00
5616.00
cum
2.05
1250.00
2562.50
cum
2.57
1300.00
3341.00
cum
tonne
0.81
2.04
1300.00
29600.00
1053.00
60384.00
cum
tonne
24.33
2.04
103.77
103.77
2524.69
211.69
day
25.00
368.00
9200.00
day
8.00
368.00
2944.00
day
4.00
368.00
1472.00
day
2.00
368.00
736.00
day
day
1.00
2.00
407.00
368.00
407.00
736.00
day
10.00
368.00
3680.00
day
1.00
368.00
368.00
day
2.65
407.00
1078.55
day
0.50
800.00
400.00
day
0.75
2200.00
1650.00
Code
Description
Unit
9999
Misc. items as spray nozzle, joint paper,

coconut oil, country soap etc.
TOTAL
TOTAL
Cost for 300 Sqm.
Cost per sqm.
Say
L.S.
Quantity
429
Rate
1.73
Amount
742.17
128289.22
1282.89
129572.11
19435.82
149007.93
496.69
496.70
16.37
Providing and laying bitumen mastic wearing course (as per specifications) with
industrial bitumen of grade 85/25 conforming to IS : 702, prepared by using mastic
cooker and laid to required level and slope, including providing antiskid surface
with bitumen precoated fine grained hard stone chipping of approved size at the
rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm centre to centre
in both directions, pressed into surface protruding 1 mm to 4 mm over mastic
surface, including cleaning the surface, removal of debris etc. all complete.
(Considering bitumen using 10.2% as per MORTH specification).
16.37.1
25 mm thick
Code
0313
2211
0295
0296
1159
0784
Description
Details of cost for surface area of 17.40
sqm for single layer of 25 mm finished
thickness.
MATERIAL
Taking wearing coat as 1 tonne and density
as 2.3 gm/c.c Volume of bitumen mastic =
1000/2300= 0.435 cum surface area =
0.435/0.025 = 17.4 sqm.
(i) Bitumen of penetration 85/25 @ 10.2% by
weight of mix
Blown type petroleum bitumen of penetration
85/25 of approved quality
(ii) Weight of coarse aggregate @ 40%
(1000 - 150) x 40/100 = 340 kg.
Stone aggregate : 340/43.38x0.0283
= 0.222 cum.
nominal size
nominal size
(iii) Weight of fine aggregate @ 15%
850 x15/100 = 127.5 kg., volume of fine
aggregate: 127.5/43.103x0.0283 =0.083 cum
Stone dust
(iv) Weight of lime stone dust @ 45% (850340-127.5) = 382.50 kg., Volume of lime
stone dust 382.50/2200 =0.174 cum.
Marble dust/ powder
986
Unit
Quantity
Rate
Amount
tonne
tonne
0.102
0.102
34561.00
103.77
3525.22
10.58
cum
0.02
1300.00
26.00
cum
0.202
1300.00
262.60
cum
0.083
865.00
71.80
cum
0.174
1000.00
174.00
Code
0297
0313
2211
2202
2267
2208
0139
0130
0138
0139
0128
0016
9999
16.37.2
Code
0313
2211
Description
(v) Precoated stone chipping for surface
finish: Volume of chips @ 0.005 cum/10
sqm=17.4x0.005/10 = 0.0087 cum say
0.009 cum
nominal size
Bitumen for precoated stone chipping @
2% =0.009x1600x2/100= 0.288 say 0.30 kg.
nominal size
(0.222 + 0.009) =0.231 cum.
Carriage of Lime
LABOUR
Mistry
Mate
Mastic Cooker
sundries (Sealing of joints, placing angles,
wastage materials)
Total
Total
Cost for 17.40 sqm
Cost per sqm
Say
Unit
Quantity
Rate
Amount
cum
0.009
1300.00
11.70
tonne
tonne
0.0003
0.0003
34561.00
103.77
10.37
0.03
cum
0.231
103.77
23.97
cum
cum
0.083
0.174
103.77
103.77
8.61
18.06
day
day
day
day
day
day
1.50
0.50
3.50
0.25
0.50
0.50
407.00
487.00
407.00
407.00
407.00
750.00
610.50
243.50
1424.50
101.75
203.50
375.00
L.S.
153.27
1.73
265.16
7366.85
73.67
7440.52
1116.08
8556.60
491.75
491.75
Unit
Quantity
tonne
tonne
0.102
0.102
40 mm thick
Description
Details of cost for surface area of
10.875sqm for single layer of 25 mm
finished thickness.
MATERIAL
Taking wearing coat as 1 tonne and density
as 2.3 gm/c.c Volume of bitumen mastic =
1000/2300= 0.435 cum surface area =
0.435/0.040 = 10.875 sqm.
Blown type petroleum bitumen of
penetration 85/25 of approved quality
(ii) Weight of coarse aggregate @ 40%
(1000 - 150) x 40/100 = 340 kg.
Stone aggregate : 340/43.38x0.0283
= 0.222 cum.
987
Rate
34561.00
103.77
Amount
3525.22
10.58
Code
Description
0295

nominal size
nominal size
(iii) Weight of fine aggregate @ 15% 850
x15/100 = 127.5 kg., volume of fine
aggregate: 127.5/43.103x0.0283 =0.083
cum
Stone dust
(iv) Weight of lime stone dust @ 45% (850340-127.5) = 382.50 kg., Volume of lime
stone dust 382.50/2200 =0.174 cum.
Marble dust/ powder
(v) Precoated stone chipping for surface
finish: Volume of chips @ 0.005 cum/10
sqm=17.4x0.005/10 = 0.0087 cum say
0.009 cum
nominal size
Bitumen for precoated stone chipping @ 2%
=0.009x1600x2/100= 0.288 say 0.30 kg.
nominal size
(0.222 + 0.009) =0.231 cum
Carriage of Lime
for mastic cooker (Taking capacity of
cooker as one tonne)
LABOUR
Mistry
Mate
Mastic Cooker
sundries (Sealing of joints, placing
angles, wastage materials)
Total
Total
Cost for 10.875 sqm
Cost per sqm
Say
0296
1159
0784
0297
0313
2211
2202
2267
2208
0139
0130
0138
0139
0128
0016
9999
16.38
Unit
Quantity
Rate
Amount
cum
0.02
1300.00
26.00
cum
0.202
1300.00
262.60
cum
0.083
865.00
71.80
cum
0.174
1000.00
174.00
cum
0.009
1300.00
11.70
tonne
tonne
0.0003
0.0003
34561.00
103.77
10.37
0.03
cum
0.231
103.77
23.97
cum
cum
0.083
0.174
103.77
103.77
8.61
18.06
day
day
day
day
day
day
1.50
0.50
3.50
0.25
0.50
0.50
407.00
487.00
407.00
407.00
407.00
750.00
610.50
243.50
1424.50
101.75
203.50
375.00
L.S.
153.27
1.73
265.16
7366.85
73.67
7440.52
1116.08
8556.60
786.81
786.80
2.5 cm thick bitumastic sheet with hot bitumen of approved quality, using stone
chippings (60% with 12.5 mm nominal size and 40% with 10 mm nominal size) @
1.65 cum per 100 sqm and coarse sand @ 1.65 cum per 100 sqm of road surface
and with bitumen @ 56 kg/cum of stone chippings and @ 128 kg/cum of sand over
a tack coat with hot straight run bitumen, including consolidation with road roller
of 8 to 10 tonne etc. complete. (tack coat to be paid separately) :
988
16.38.1
Code
2916
2914
2211
2342
2910
2911
2202
0370
2200
0982
2203
0128
0114
0115
0114
0130
0114
0113
0101
0003
0001
0023
0364
0365
9999
9999
With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of
70 grams per kg of asphalt
Description
80/100 bitumen @56kg. per cum. of
aggregate and 128kg. per cum. of sand:
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211t
MATERIAL
Solvent 0.070 kg. x 303 kg. = 21.21kg
Solvent
nominal size
nominal size
nominal size
Coal (steam)
Labour for cleaning road surface, heating
bitumen mixing and spreading aggregate :
(a) For cleaning :
Mate
Beldar
Coolie
(b) For heating bitumen :
Beldar
pre-mix aggregate :
Mistry
Beldar
(d) Consolidation charges :
Chowkidar
(at barriers for night watch and for road roller)
Bhisti
10 tonne
1400 litres
(e) Misc :
Wire brush (with thick wire)
Wire brush
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
989
Unit
Quantity
tonne
0.303
29600.00
8968.80
kilogram
tonne
quintal
21.21
0.303
0.212
25.00
103.77
10.38
530.25
31.44
2.20
cum
0.99
1200.00
1188.00
cum
0.66
1200.00
792.00
1.65
0.606
0.0606
1.65
1.65
103.77
400.00
118.59
1200.00
103.77
171.22
242.40
7.19
1980.00
171.22
day
day
day
0.16
1.40
1.40
407.00
368.00
368.00
65.12
515.20
515.20
day
1.19
368.00
437.92
day
day
0.24
6.12
487.00
368.00
116.88
2252.16
day
0.34
368.00
125.12
day
0.13
407.00
52.91
day
0.13
2200.00
286.00
day
day
0.21
0.05
800.00
3500.00
168.00
175.00
each
each
L.S.
L.S.
0.13
0.40
7.15
8.97
20.00
18.00
1.73
1.73
2.60
7.20
12.37
15.52
18831.92
188.32
19020.24
2853.04
21873.28
218.73
218.75
cum
quintal
tonne
cum
cum
Rate
Amount
16.38.2
Code
7309
2211
2910
2911
2202
0370
2200
0982
2203
0128
0114
0115
0114
0130
0114
0113
0101
0003
0001
0023
0364
0365
9999
9999
With paving Asphalt grade VG - 30

Description
60/70 bitumen @56kg. per cum. of
aggregate and 128kg. per cum. of sand:
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211t
Total= 0.303t
MATERIAL
nominal size
nominal size
nominal size
quintals per tonne of bitumen =
2x0.303=0.606q
Coal (steam)
(a) For cleaning :
Mate
Beldar
Coolie
Beldar
pre-mix aggregate :
Mistry
Beldar
Chowkidar
(at barriers for night watch and for road roller)
Bhisti
10 tonne
1400 litres
(e) Misc :
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
990
Unit
Quantity
tonne
tonne
0.303
0.303
30516.00
103.77
9246.35
31.44
cum
0.99
1200.00
1188.00
cum
0.66
1200.00
792.00
cum
1.65
103.77
171.22
0.606
0.0606
1.65
1.65
400.00
118.59
1200.00
103.77
242.40
7.19
1980.00
171.22
day
day
day
0.16
1.40
1.40
407.00
368.00
368.00
65.12
515.20
515.20
day
1.19
368.00
437.92
day
day
0.24
6.12
487.00
368.00
116.88
2252.16
day
0.34
368.00
125.12
day
0.13
407.00
52.91
day
0.13
2200.00
286.00
day
day
0.21
0.05
800.00
3500.00
168.00
175.00
each
0.13
20.00
2.60
each
L.S.
L.S.
0.40
7.15
8.97
18.00
1.73
1.73
7.20
12.37
15.52
18577.02
185.77
18762.79
2814.42
21577.21
215.77
215.75
quintal
tonne
cum
cum
Rate
Amount
16.38.3
Code
7739
2914
2211
2342
2910
2911
2202
0370
2200
0982
2203
0128
0114
0115
0114
0130
0114
0113
0101
0003
0001
0023
0364
0365
9999
9999
With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP : 53

Description
MATERIAL
CRMB - 55
@56kg. per cum. of aggregate and 128kg.
per cum. of sand:
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211t
Total = 0.303 t
Solvent
0.070 kg. x 303 kg. = 21.21kg
nominal size
nominal size
nominal size
Coal (steam)
(a) For cleaning :
Mate
Beldar
Coolie
Beldar
pre-mix aggregate :
Mistry
Beldar
Chowkidar
Bhisti
10 tonne
1400 litres
(e) Misc :
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
991
Unit
Quantity
tonne
0.303
33548.00
10165.04
kilogram
21.21
25.00
530.25
tonne
quintal
0.303
0.212
103.77
10.38
31.44
2.20
cum
0.99
1200.00
1188.00
cum
0.66
1200.00
792.00
1.65
0.606
0.0606
1.65
1.65
103.77
400.00
118.59
1200.00
103.77
171.22
242.40
7.19
1980.00
171.22
day
day
day
0.16
1.40
1.40
407.00
368.00
368.00
65.12
515.20
515.20
day
1.19
368.00
437.92
day
day
0.24
6.12
487.00
368.00
116.88
2252.16
day
day
0.34
0.13
368.00
407.00
125.12
52.91
day
0.13
2200.00
286.00
day
day
0.21
0.05
800.00
3500.00
168.00
175.00
each
0.13
20.00
2.60
each
L.S.
L.S.
0.40
7.15
8.97
18.00
1.73
1.73
7.20
12.37
15.52
20028.16
200.28
20228.44
3034.27
23262.71
232.62
232.60
cum
quintal
tonne
cum
cum
Rate
Amount
16.39
4 cm thick bitumastic sheet with hot bitumen of approved quality, using stone
chippings (60% with 12.5 mm nominal size and 40% with 10 mm nominal size) @
2.60 cum per 100 sqm and coarse sand @ 2.60 cum per 100 sqm of road surface
and with bitumen @ 56 kg/cum of stone chippings and @ 128 kg/cum of sand over
a tack coat with hot straight run bitumen, including consolidation with road roller
of 8 to 10 tonne etc. complete. (tack coat to be paid separately) :
16.39.1
With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of
70 grams per kg of asphalt
Code
2916
2914
2342
2211
2910
2911
2202
0982
2203
0370
2200
0128
0114
0115
0114
0130
0114
0113
0101
0003
0001
0023
Description
MATERIAL
per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
Total = 0.479 t
Solvent
0.70kg.x479=33.53kg
nominal size
nominal size
nominal size
qunitals per tonne of bitumen
= 2x0.479=0.958q
Coal (steam)
(a) For cleaning :
Mate
Beldar
Coolie
Beldar
pre-mix aggregate :
Mistry
Beldar
Chowkidar
Bhisti
10 tonne
1400 litres
(e) Misc :
992
Unit
Quantity
tonne
0.479
29600.00
14178.40
kilogram
33.53
25.00
838.25
quintal
tonne
0.335
0.479
10.38
103.77
3.48
49.71
cum
1.56
1200.00
1872.00
cum
1.04
1200.00
1248.00
cum
cum
cum
2.60
2.60
2.60
103.77
1200.00
103.77
269.80
3120.00
269.80
0.958
0.0958
400.00
118.59
383.20
11.36
day
day
day
0.16
1.40
1.40
407.00
368.00
368.00
65.12
515.20
515.20
day
1.88
368.00
691.84
day
day
0.31
9.46
487.00
368.00
150.97
3481.28
day
day
0.45
0.18
368.00
407.00
165.60
73.26
day
0.18
2200.00
396.00
day
day
0.30
0.03
800.00
3500.00
240.00
105.00
quintal
tonne
Rate
Amount
Code
Description
0364
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
0365
9999
9999
16.39.2
Code
7309
2211
2910
2911
2202
0982
2203
0370
2200
0128
0114
0115
0114
0130
0114
0113
0101
Unit
Quantity
Rate
Amount
each
0.09
20.00
1.80
each
L.S.
L.S.
0.27
5.33
16.12
18.00
1.73
1.73
4.86
9.22
27.89
28687.24
286.87
28974.11
4346.12
33320.23
333.20
333.20
With paving asphalt grade VG - 30 with no solvent

Description
MATERIAL
per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
Total = 0.479 t
nominal size
nominal size
nominal size
=2x0.479=0.958 qtl
Coal (steam)
(a) For cleaning :
Mate
Beldar
Coolie
Beldar
pre-mix aggregate :
Mistry
Beldar
Chowkidar
Bhisti
993
Unit
Quantity
tonne
0.479
30516.00
14617.16
tonne
0.479
103.77
49.71
cum
1.56
1200.00
1872.00
cum
1.04
1200.00
1248.00
cum
cum
cum
2.60
2.60
2.60
103.77
1200.00
103.77
269.80
3120.00
269.80
0.958
0.0958
400.00
118.59
383.20
11.36
day
day
day
0.16
1.40
1.40
407.00
368.00
368.00
65.12
515.20
515.20
day
1.88
368.00
691.84
day
day
0.31
9.46
487.00
368.00
150.97
3481.28
day
day
0.45
0.18
368.00
407.00
165.60
73.26
quintal
tonne
Rate
Amount
Code
Description
0003

10 tonne
1400 litres
(e) Brushes etc. for cleaning :Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
0001
0023
0364
0365
9999
9999
16.39.3
Code
7739
2914
2342
2211
2910
2911
2202
0982
2203
0370
2200
0128
0114
Unit
Quantity
Rate
Amount
day
0.18
2200.00
396.00
day
day
0.30
0.03
800.00
3500.00
240.00
105.00
each
0.09
20.00
1.80
each
L.S.
L.S.
0.27
5.33
16.12
18.00
1.73
1.73
4.86
9.22
27.89
28284.27
282.84
28567.11
4285.07
32852.18
328.52
328.50
With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP : 53

Description
MATERIAL
CRMB - 55
per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
Total = 0.479 tonne
Solvent
0.70kg.x479=33.53kg.
nominal size
nominal size
nominal size
qunitals per tonne of bitumen =
2x0.479=0.958q
Coal (steam)
(a) For cleaning :
Mate
Beldar
994
Unit
Quantity
tonne
0.479
33548.00
16069.49
kilogram
33.53
25.00
838.25
quintal
tonne
0.335
0.479
10.38
103.77
3.48
49.71
cum
1.56
1200.00
1872.00
cum
1.04
1200.00
1248.00
cum
cum
cum
2.60
2.60
2.60
103.77
1200.00
103.77
269.80
3120.00
269.80
0.958
0.0958
400.00
118.59
383.20
11.36
0.16
1.40
407.00
368.00
65.12
515.20
quintal
tonne
day
day
Rate
Amount
Code
Description
Unit
Quantity
0115
Coolie
Beldar
pre-mix aggregate :
Mistry
Beldar
Chowkidar
Bhisti
10 tonne
1400 litres
(e) Misc :
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
day
1.40
368.00
515.20
day
1.88
368.00
691.84
day
day
0.31
9.46
487.00
368.00
150.97
3481.28
day
day
0.45
0.18
368.00
407.00
165.60
73.26
day
0.18
2200.00
396.00
day
day
0.30
0.03
800.00
3500.00
240.00
105.00
each
0.09
20.00
1.80
each
L.S.
L.S.
0.27
5.33
16.12
18.00
1.73
1.73
4.86
9.22
27.89
30578.33
305.78
30884.11
4632.62
35516.73
355.16
355.15
0114
0130
0114
0113
0101
0003
0001
0023
0364
0365
9999
9999
16.40
Code
2916
2211
0982
2203
0370
2200
0128
0114
Rate
Amount
Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and
retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm
of road surface, including rolling and finishing with road roller all complete.
Description
MATERIAL
@ 128kg/cum. of sand 128x0.60 =
76.80kg. = 0.0768 m.t
=2x0.768=0.1.536 qtl
Coal (steam)
(a) For cleaning :
Mate
Beldar
995
Unit
Quantity
tonne
0.0768
29600.00
2273.28
tonne
cum
cum
0.0768
0.60
0.60
103.77
1200.00
103.77
7.97
720.00
62.26
quintal
tonne
1.536
0.1536
400.00
118.59
614.40
18.22
0.06
0.49
407.00
368.00
24.42
180.32
day
day
Rate
Amount
Code
Description
Unit
Quantity
0115
Coolie
Beldar
0.38/96x76.8
pre-mix aggregate :
Beldar
11.39/0.75x0.60
Mistry
0.06/0.75x0.60
(d) Miscellaneous :
Chowkidar
Bhisti
10 tonne
1400 litres
(e) Misc :
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
day
0.97
368.00
356.96
day
0.30
368.00
110.40
day
1.11
368.00
408.48
day
0.05
487.00
24.35
day
day
0.15
0.06
368.00
407.00
55.20
24.42
day
0.06
2200.00
132.00
day
day
0.05
0.01
800.00
3500.00
40.00
35.00
each
0.05
20.00
1.00
each
L.S.
0.12
18.20
18.00
1.73
2.16
31.49
5122.33
51.22
5173.55
776.03
5949.58
59.49
59.50
0114
0114
0130
0113
0101
0003
0001
0023
0364
0365
9999
16.41
Code
2916
2211
0298
2202
0370
2200
Rate
Amount
Providing and laying seal coat over prepared surface of road with bitumen heated
in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade
VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size
(Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface,
including rolling and finishing with power road roller all complete.
Description
MATERIAL
nominal size
nominal size
=2x0.0.98=1.96 qtl
Coal (steam)
(a) For heating and spraying bitumen :
996
Unit
Quantity
Rate
Amount
tonne
tonne
0.098
0.098
29600.00
103.77
2900.80
10.17
cum
0.90
1300.00
1170.00
cum
0.90
103.77
93.39
quintal
tonne
1.96
0.196
400.00
118.59
784.00
23.24
Code
Description
Unit
Quantity
0130
0138
0114
Mistry
Beldar
(b) For cleaning :
Mate
Beldar
Coolie
(c) For screening and spraying aggregate :
Mate
Beldar
(d) Misc :
Chowkidar
Bhisti
10 tonne
1400 litres
(e) Misc :
Wire brush
(with thick wire)
Soft brush
Sundries
TOTAL
TOTAL
Cost for 100 sqm.
Cost per sqm.
Say
day
day
day
0.04
0.06
0.69
487.00
407.00
368.00
19.48
24.42
253.92
day
day
day
0.11
1.40
1.40
407.00
368.00
368.00
44.77
515.20
515.20
day
day
0.05
0.51
407.00
368.00
20.35
187.68
day
day
0.15
0.06
368.00
407.00
55.20
24.42
day
day
0.06
0.06
2200.00
250.00
132.00
15.00
day
0.06
800.00
48.00
each
0.05
20.00
1.00
each
L.S.
L.S.
0.12
18.20
2.73
18.00
1.73
1.73
2.16
31.49
4.72
6876.61
68.77
6945.38
1041.81
7987.19
79.87
79.85
0128
0114
0115
0128
0114
0113
0101
0003
0007
0001
0364
0365
9999
9999
16.42
Code
0293
0295
0297
2206
2202
0982
2203
Rate
Amount
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm

nominal size) in pavements, laid to required slope and camber in panels as required
including consolidation finishing and tamping complete.
Description
Details of cost for 1.00 cum.
MATERIAL
nominal size
nominal size
nominal size
nominal size
997
Unit
Quantity
Rate
Amount
cum
0.52
1250.00
650.00
cum
0.22
1300.00
286.00
cum
0.11
1300.00
143.00
cum
0.52
112.79
58.65
cum
cum
cum
0.33
0.445
0.445
103.77
1200.00
103.77
34.24
534.00
46.18
Code
Description
0367
2209

Carriage of Cement
LABOUR
Mason (average)
Beldar
Bhisti
MACHINERY
Hire charges of Concrete Mixer 0.25 to
0.40 cum with hooper
Vibrator (Needle type 40 mm)
Sundries
Side shuttering
Taking the slab to be 5cm thick and width
to be 6 metre, length of road 27 metre =
9.90/24.30 = 0.407 sqm
Sundries
TOTAL
i.e. on (4749.52 - 78.94) = 4670.58
TOTAL
= 4717.29
Cost for 1 cum.
Say
0155
0114
0101
0002
0012
9999
5.9.1
9999
16.43
Unit
Quantity
Rate
Amount
tonne
tonne
0.32
0.32
5700.00
92.24
1824.00
29.52
day
day
day
0.10
1.63
0.70
467.00
368.00
407.00
46.70
599.84
284.90
day
day
L.S.
0.077
0.07
26.00
800.00
350.00
1.73
61.60
24.50
44.98
sqm
L.S.
0.407
1.43
193.95
1.73
78.94
2.47
4749.52
46.71
4796.23
707.59
5503.82
5503.80
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi
tracks/ runways, using cement content as per design mix, using coarse sand and
graded stone aggregate of 40 mm nominal size in appropriate proportions as per
approved & specified design criteria, providing dowel bars with sleeve/ tie bars
wherever required, laying at site, spreading and compacting mechanically by using
needle and surface vibrators, levelling to required slope/ camber, finishing with
required texture, including steel form work with sturdy M.S. channel sections, curing,
making provision for contraction/ expansion, construction & longitudinal joints (
10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints
with approved joint filler and sealants, complete all as per direction of Engineer-incharge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid
separately).
Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement
used as per design mix is payable/ recoverable separately.
16.43.1
Cement concrete prepared with batch mixing machine
Code
Description
0367
2209

MATERIAL
Carriage of Cement
998
Unit
Quantity
tonne
tonne
0.34
0.34
Rate
5700.00
92.24
Amount
1938.00
31.36
Code
Description
0293

nominal size
nominal size
nominal size
nominal size
LABOUR :- FOR MIXING AND LAYING
Beldar
Bhisti
Mate
For compaction by vibrator
Mason (average)
Beldar
MACHINERY
Production cost of concrete by batch mix
plant.
(Assuming 25 cum. per day)
Pumping charges of concrete including
Hire charges of pump, piping work &
accessories etc.
Pin vibrator
(SHP) with 50 cum. output per day
Surface Vibrator
with 25 cum. output per day
Add for steel form work
Rate as per Item Number 16.43B of
SH: Road work
Cutting and making joints
TOTAL
TOTAL
Cost per cum.
Say
0295
0297
0982
2206
2202
2203
0114
0101
0123
0124
0128
0155
0114
0004
0009
0021
0022
16.43B
9999
16.43.2
Code
0367
2209
0293
Unit
Quantity
Rate
Amount
cum
0.52
1250.00
650.00
cum
0.22
1300.00
286.00
cum
cum
0.11
0.445
1300.00
1200.00
143.00
534.00
cum
0.52
112.79
58.65
cum
cum
0.33
0.445
103.77
103.77
34.24
46.18
day
day
day
day
day
2.00
0.27
0.05
0.05
0.04
368.00
407.00
487.00
448.00
407.00
736.00
109.89
24.35
22.40
16.28
day
day
0.07
0.07
467.00
368.00
32.69
25.76
cum
1.00
400.00
400.00
cum
day
1.00
0.025
200.00
250.00
200.00
6.25
day
0.05
250.00
12.50
cum
L.S.
1.00
50.00
540.75
1.73
540.75
86.50
5934.80
59.35
5994.15
899.12
6893.27
6893.25
Cement concrete manufactured in automatic batching plant (RMC plant) i/c

transportation to site in transit mixer
Description
MATERIAL
Carriage of Cement
nominal size
999
Unit
Quantity
Rate
Amount
tonne
tonne
0.34
0.34
5700.00
92.24
1938.00
31.36
cum
0.52
1250.00
650.00
Code
Description
0295

nominal size
nominal size
nominal size
LABOUR :- FOR MIXING AND LAYING
Beldar
Bhisti
Mate
For compaction by vibrator
Mason (average)
Beldar
MACHINERY
Production cost of concrete by batch mix
plant.
(Assuming 25 cum. per day)
Carriage of concrete by transit mixer.
Pumping charges of concrete including Hire
charges of pump, piping work &
accessories etc.
Pin vibrator
(SHP) with 50 cum. output per day
Surface Vibrator
with 25 cum. output per day
Add for steel form work
Rate as per Item Number 16.43B of
SH: Road work
Cutting and making joints
TOTAL
TOTAL
Cost per cum.
Say
0297
0982
2206
2202
2203
0114
0101
0123
0124
0128
0155
0114
0004
0029
0009
0021
0022
16.43B
9999
16.43A
Code
Unit
Quantity
Rate
Amount
cum
0.22
1300.00
286.00
cum
cum
0.11
0.445
1300.00
1200.00
143.00
534.00
cum
0.52
112.79
58.65
cum
cum
0.33
0.445
103.77
103.77
34.24
46.18
day
day
day
day
day
2.00
0.27
0.05
0.05
0.04
368.00
407.00
487.00
448.00
407.00
736.00
109.89
24.35
22.40
16.28
day
day
0.07
0.07
467.00
368.00
32.69
25.76
cum
1.00
400.00
400.00
km/ cum
10.00
23.00
230.00
cum
day
1.00
0.025
200.00
250.00
200.00
6.25
day
0.05
250.00
12.50
cum
L.S.
1.00
50.00
540.75
1.73
540.75
86.50
6164.80
61.65
6226.45
933.97
7160.42
7160.40
Unit
Quantity
Annexure A to Item number 16.43

Description
Details of cost for 8.5 cum.
MATERIAL:
(i) Painting with primer
(i) Construction joint 6.15m. long 30cm deep
6.15x(0.30+0.01)= 1.91sqm.+
1000
Rate
Amount
Code
0316
9977
0314
9977
0370
9977
0123
0131
0124
0114
16.43B
Code
Description
(ii) Dummy joints
4.61m long and 10cm deep 10mm wide
4.6 lx(0.10+0.10+0.01) = 0.97 sqm.
= 2.88 sqm.
2.88sqm. @0.26 lit./sqm. = 0.75 lit. +
Add 5% wastage = 0.03
Total =0.78 lit
Bitumen solution primer of approved quality
Carriage
(ii) Joint sealing compound (GradeA) for
construction joint 6.15m long 10mm wide
25mm deep.
6.15x2x2.5cm = 3075cucm
For dummy joints
461xl.0xl0cm. = 4610cucm.
= 7685 cum
Add 5% wastage = 384 cucm
Total = 8069 cucm
Say 8.07 cudm. @1.2kg/cudm = 9.68 kg
Bitumen hot sealing compound : grade A
Carriage
Coal (steam)
Carriage
LABOUR:
(ii) For applying primer qty. = 2.88 sqm
Painter
(iii) Labour for heating and filling sealing
compound.
(iv) Beldar for heating = 0.06 +
Beldar
TOTAL
Cost for 8.5 cum
Cost per cum.
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.78
0.91
50.00
1.73
39.00
1.57
kilogram
L.S.
quintal
L.S.
9.68
0.91
0.015
0.91
28.00
1.73
400.00
1.73
271.04
1.57
6.00
1.57
day
day
3.00
0.10
487.00
448.00
1461.00
44.80
day
0.25
448.00
112.00
day
0.68
368.00
250.24
2188.79
2188.79
257.50
257.50
Unit
Quantity
Annexure B to Item number 16.43

Description
ANALYSIS OF ANNEXTURE 'B' 16.43B
(Required in 16.43)
STEEL FORM WORK :
Part-I Cost of materials :
Assuming that pavement 30m long 22.5m
wide and 0.30m deep having panel size
6.15x4.61x0.30m or 8.50cu. laid in a day of
8 hrs. Hence form work to be provided for 2
days.
MATERIAL
22x30.75 = 676.50
2x46.10 = 92.20
Total = 768.70m.
768.70 @ 83.10 kg/ m = 25.44 M.T.
1001
Rate
Amount
Code
1007
2205
0103
0114
0114
16.44
Code
7254
16.45
Code
0317
2211
Description
Assuming that channel will become
unserviceable after use for 5000 slab (100
times) and salvage value of steel shall
fetch 20% of its basic cost.
and R.S. joists
Carriage of Steel
Part-II Labour for assembling, errection,
dismeritelling and cleaning the shuttering.
Assuming that 255 labour for steel
shuttering shall be required as compared to
timber shuttering. Contact area of 50 slabs
of steel shuttering.
Long channel = 11x20x0.30 = 66.00
= 2x45.10x0.30 = 27.06
Total= 93.06
LABOUR
Beldar
Carriage of steel for extra lead of runway
Beldar
TOTAL
Cost for 50 slabs / 8.5 cum
Cost per cum.
Say
Unit
Quantity
Rate
Amount
quintal
tonne
0.0407104
0.00407104
3775.00
92.24
153.68
0.38
day
day
2.86
2.86
448.00
368.00
1281.28
1052.48
day
5.73
368.00
2108.64
4596.46
4596.46
540.76
540.75
Extra for providing and mixing hardening compound of approved quality as per
manufacturer's specification in cement concrete.
Description
Details of cost for 1 litre
MATERIAL
Hardening compound
(including cartage)
TOTAL
TOTAL
Cost per litre
Say
Unit
Quantity
litre
1.00
Rate
Amount
40.00
40.00
40.00
0.40
40.40
6.06
46.46
46.45
Providing and fixing in position pre-moulded joint filler in expansion joints.

Description
Details of cost for 18mm thick 15cm deep
and 300m in length
MATERIAL
Premoulded joint filler 12 mm thick
= 300x0.15 = 45 sqm.
45x0.018 =0.81cum.
Weight 256.3kg. per cum. = 256.3x0.81
= 207.6kg. say 0.21 tonne
1002
Unit
Quantity
Rate
Amount
sqm
45.00
303.00
13635.00
tonne
0.21
103.77
21.79
Code
0124
0114
9999
Description
Labour for fixing etc. :
Beldar
Sundries
TOTAL
TOTAL
Cost for 300m length, 18mm width and
15cm depth
Cost for one cm. depth one cm. width
per metre length.
Say
Unit
Quantity
day
day
L.S.
1.00
3.00
26.91
Rate
448.00
368.00
1.73
Amount
448.00
1104.00
46.55
15255.34
152.55
15407.89
2311.18
17719.07
2.18
2.20
16.46
Providing and laying in position bitumen hot sealing compound for expansion joints
etc.
16.46.1
Using grade 'A' sealing compound.
Code
0314
2211
0124
0114
9999
16.47
Description
Unit
Details of cost for 20mm wide 20mm deep

and 300 metres in length.
Sealing compound300x0.02x0.02 = 0.12cum.
Weight 256.3kg. per cum. = 256.3x0.12 =
30.76 kg
MATERIAL
Bitumen hot sealing compound : grade A
30.76 = 0.3076 Say
0.03 tonne
Labour for filling :
Beldar
Sundries
TOTAL
TOTAL
Cost for 20mm depth, 20mm width and
300m length
Cost for one cm. depth one cm. width per
metre length.
Say
Quantity
Rate
Amount
kilogram
tonne
30.76
0.03
28.00
103.77
861.28
3.11
day
day
L.S.
1.00
2.50
20.67
448.00
368.00
1.73
448.00
920.00
35.76
2268.15
22.68
2290.83
343.62
2634.45
2.19
2.20
Painting runway/taxi track/apron marking with adequate nos of coats to give uniform
finish with road marking paint of superior make as approved by the Engineer-incharge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign mater;al
etc. and lining out complete.
1003
16.47.1
Code
7256
9977
0131
0114
9999
16.47.2
Code
7256
9977
0131
0114
9999
16.48
New work (Two or more coats)

Description
MATERIAL
1st Coat - 1.66 +
2nd Coat -1.13
Total = 2.79
Superior quality road marking paint
(water based)
Carriage of paint
LABOUR
Painter
Beldar
Sundries
(including painting brush, wire brush, labour
for controlling traffic and other T&P etc.)
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
Unit
Quantity
Rate
Amount
litre
L.S.
2.79
5.07
140.00
1.73
390.60
8.77
day
day
L.S.
0.54
0.54
36.40
448.00
368.00
1.73
241.92
198.72
62.97
902.98
9.03
912.01
136.80
1048.81
104.88
104.90
Old work (One or more coats)

Description
MATERIAL
Superior quality road marking paint
(water based)
Carriage of paint
LABOUR
Painter
Beldar
Sundries
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
Unit
Quantity
Rate
Amount
litre
L.S.
1.66
1.12
140.00
1.73
232.40
1.94
day
day
L.S.
0.36
0.36
24.44
448.00
368.00
1.73
161.28
132.48
42.28
570.38
5.70
576.08
86.41
662.49
66.24
66.25
Painting road surface marking with adequate nos of coats to give uniform finish
with ready mixed road marking paint conforming to IS : 164, on bituminous surface
in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease
and foreign material etc. complete.
1004
16.48.1
Code
7255
9977
0128
0131
0114
9999
16.48.2
Code
7255
9977
0128
0131
0114
9999
New work (Two or more coats)

Description
MATERIAL
Road marking paint (spirit based)
(confirming to IS 164
spirit base)
Carriage of paint (1.48/0.8x0.08x6.9)
LABOUR
Mate
Painter
Beldar
for stretching of rope & errecting of
barricading
Sundries
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
Unit
Quantity
Rate
Amount
litre
1.48
120.00
177.60
L.S.
2.65
1.73
4.58
day
day
day
0.10
0.54
1.68
407.00
448.00
368.00
40.70
241.92
618.24
L.S.
36.40
1.73
62.97
1146.01
11.46
1157.47
173.62
1331.09
133.10
133.10
Old work (One or more coats)

Description
MATERIAL
Road marking paint (spirit based)
(confirming to IS 164 spirit base)
Carriage of paint.
LABOUR
Mate
Painter
Beldar
(stretching of rope & errecting of
barricading etc.)
Sundries
TOTAL
TOTAL
Cost for 10 sqm.
Cost per sqm.
Say
1005
Unit
Quantity
Rate
Amount
litre
0.89
120.00
106.80
L.S.
0.65
1.73
1.12
day
day
day
0.06
0.36
1.12
407.00
448.00
368.00
24.42
161.28
412.16
L.S.
24.44
1.73
42.28
748.06
7.48
755.54
113.33
868.87
86.88
86.90
16.49
Code
2.8.1
4.1.8
4.1.5
5.3
5.22.1
Making bell mouth opening/ entrance of size 100x50x50 cm for drainage pipe under
footpath, including providing cement concrete 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size) for shape of bell mouth, including
plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering
with cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on exposed
surface of the slab & bell mouth including centring, shuttering & neat cement
punning inside the bell mouth etc. all complete.
Description
(i) Earth work in excavation
Channel :- 10x1x1.00x0.20x0.15 = 0.30+
Bell mouth :-10x1x1.00x0.50x
(0.18+0.075)/2 = 0.64
Total = 0.94
MATERIAL
(Rate as per item no. 2.8.1 of SH: Earth work)
(ii) Cement concrete 1:4:8
Channel :-10x1x1.00x0.20x0.075 = 0.15 cum.
SH : Concrete Work
(iii) Cement concrete 1:3:6
Channel
10x1x1.00x0.20x0.75 = 0.15 +
Bed of bell mouth :
10x1x1.00x0.50x(0.18+0.075)/2 = 0.64 +
Haunches portion
10x2x(0.35+0.075)/2x0.25x0.375 = 0.40 +
Rect part :10x2x0.35x0.25x0.375 = 0.65 +
Quadrant portion :10x1[(0.30x0.30)-3.142/4(0.30)]x0.30 =0.06+
Central middle part :10x1x0.30x0.25x0.075 = 0.05
Total = 1.95 cum.
(Rate as per item no.4.1.5 S.H. : Cement
Concrete)
(iv) RCC in shelves
10x1x1.00x0.50x0.05 = 0.25cum.
Rate as per item no. 5.3 SH : Reinforced
(v) Reinforcement for RCC @100kg/cum.
0.25x100=25kg.
Rate as per item no. 5.22.1 SH : Reinforced
(vi) Centering and shuttering
For shelves (sides)
10x2(1.00+0.50)x0.05 = 1.50+
Front side of bell mouth :
10x2(0.446)x0.375 = 3.34 +
Pipe portion:
10x[0.30x0.375-3.142/4(030)] = 0.04 +
Out side of bell mouth
Total= 10x(1.00 =0.50)x0.45 = 9.00+
Deduct pipe opening
Total =10x0.785x0.30x0.30 = (-)0.71
Total = 13.17
1006
Unit
Quantity
Rate
Amount
cum
0.94
166.40
156.42(A)
cum
0.15
4478.15
671.72(A)
cum
1.95
4927.00 9607.65(A)
cum
0.25
7390.80 1847.70(A)
kg
25.00
55.30 1382.50(A)
Code
Description
Unit
Quantity
5.9.1
Rate as per item No.5.9.1 of SH : RCC

(vii) cement plaster on RCC slab
10x1.00x0.50 = 5.00 +
10x2(1.00+0.50)x0.05 = 1.50+
Total = 6.50 sqm.
Rate as per item no.13.16.1
(viii) Neat cement punning:
Qty. same as marked (x) at (9vi) =
Total =3.34+0.04 = 3.38 sqm.
Channel portion:
10x1x(0.85+0.30)/2x0.25 = 1.43
Total = 4.81
Rate as per item no.13.18 S.H. Finishing
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
Hire charges of mixer
Sundries
Labour for plaster
Mason (average)
Coolie
Bhisti
Scaffolding
TOTAL
i.e. on (18166.76 - 17359.92) = 806.84
TOTAL
= 814.91
Cost for 10 nos.
Cost for one bell mouth
Say
sqm
13.17
sqm
6.50
143.80
934.70(A)
sqm
tonne
tonne
cum
4.81
0.024
0.024
0.05
42.60
5700.00
92.24
760.00
204.91(A)
136.80
2.21
38.00
cum
0.05
103.77
5.19
day
day
L.S.
L.S.
0.035
0.003
1.27
1.27
368.00
407.00
1.73
1.73
12.88
1.22
2.20
2.20
day
day
day
L.S.
L.S.
0.33
0.488
0.60
8.71
7.62
467.00
368.00
407.00
1.73
1.73
154.11
179.58
244.20
15.07
13.18
18166.76
5.23
13.18
0367
2209
0983
2261
0114
0101
9999
9999
0155
0115
0101
9999
9999
16.50
Rate
Amount
193.95 2554.32(A)
8.07
18174.83
122.24
18297.07
1829.70
1829.70
Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall
be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene)
or ABS having electronically welded micro- prismatic lens with abrasion resistant
coating as approved by Engineer in charge. The glow stud shall support a load of
13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective
surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with
at least 12 cm of reflective area up each side. The luminance intensity should be as
per the specification and shall be tested as described in ASTM I: 809 as
recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface
1007
using the adhesive conforming to IS, as per procedure recommended by the

manufacturer complete and as per direction of Engineer-in-charge.
Code
7426
9977
0124
0114
9999
Description
MATERIAL
Cat's eye
Carriage of cats eyes
LABOUR
Beldar
Sundries
(including material required for fixing cats
eyes and providing barricading to divert
traffic)
TOTAL
TOTAL
Cost for 15 Nos.
Cost for one cat's eye.
Say
Unit
Quantity
Rate
Amount
each
L.S.
15.00
2.60
105.00
1.73
1575.00
4.50
day
day
L.S.
0.50
0.50
39.00
448.00
368.00
1.73
224.00
184.00
67.47
2054.97
20.55
2075.52
311.33
2386.85
159.12
159.10
16.51
Preparation of sub-base road pavement with commercial dry lime (slaked), fly ash
stabilised soil with a mix of 3% lime, 12% fly ash and 85% local suitable soil by
weight, so as to achieve minimum field C.B.R. of 20, including mixing, rolling with
road roller curing etc. all complete.
16.51.1
Minimum thickness 15 cm
Code
0777
2208
1980
2267
0114
0115
0979
2241
0114
0115
0113
0003
9999
0114
0115
Description
Unit
Details of cost for 6.67 sqm. or 1 cum.

MATERIAL
Carriage of Lime
Flyash
LABOUR
(i)For earth work :
Beldar
Coolie
Royalty for good earth
Carriage of Good earth
(ii) For mixing :
Beldar
Coolie
(iii) For rolling layers :
Chowkidar
10 tonne
Sundries
(iv) Labour for spreading and watering :
Beldar
Coolie
1008
Quantity
Rate
Amount
quintal
cum
cum
cum
0.41
0.068
0.277
0.277
280.00
103.77
8.00
103.77
114.80
7.06
2.22
28.74
day
day
cum
cum
0.116
0.116
0.655
0.655
368.00
368.00
30.00
129.71
42.69
42.69
19.65
84.96
day
day
0.025
0.025
368.00
368.00
9.20
9.20
day
0.0008
368.00
0.29
day
L.S.
0.0008
0.18
2200.00
1.73
1.76
0.31
day
day
0.26
0.26
368.00
368.00
95.68
95.68
Code
Description
Unit
Quantity
0101
Bhisti
TOTAL
TOTAL
Cost for 1 cum.
Say
day
0.18
16.52
Code
16.52Y
0114
0115
6501
2335
0114
0115
0101
3.8
0155
0115
0101
9999
6501
2335
0123
0115
Rate
407.00
Amount
73.26
628.19
6.28
634.47
95.17
729.64
729.65
Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1 lime: 2 fly ash :
3 coarse sand : 6 graded stone aggregate 20 mm nominal size), including finishing
with 10mm thick cement mortar 1:3 (1 cement : 3 coarse sand) in foot paths, including
preparation of sub grade with a hand rammer, laying 10 mm thick leveling course
of fine sand (jamuna sand) and filling the joints with fine sand.
Description
Details of cost for a path of area 10sqm. no.
of blocks required for 10sqm. = 108 nos.
(a) Concrete in blocks
(108x0.30x0.30x0.09 = 0.875 cum.)
Rate as per sub analysis Item Number
16.52Y of SH:Road Work
(b) Labour for surface excavation :
Beldar
Coolie
(c) For levelling course of fine sand
Sand zone V (Jamuna)
Carriage of Jamuna sand
LABOUR
Beldar
Coolie
Bhisti
(d) For finishing with 10mm thick cement
plaster
cement plaster with cement mortar 1:3(1
Cement: 3 Coarse sand)
qty. for 9.72sqm. = 0.0972 cum
Mason (average)
Coolie
Bhisti
(e) For laying blocks and filling joints with
Jamuna sand for filling joints 5mm (av.)
thick
Coolie
1009
Unit
Quantity
Rate
Amount
cum
0.875
2793.95
2444.71
day
day
0.72
0.60
368.00
368.00
264.96
220.80
cum
cum
0.10
0.10
600.00
103.77
60.00
10.38
day
day
day
0.0089
0.0107
0.0035
368.00
368.00
407.00
3.28
3.94
1.42
cum
day
day
day
L.S.
0.0972
0.787
0.787
0.262
12.22
4723.50
467.00
368.00
407.00
1.73
459.12
367.53
289.62
106.63
21.14
cum
cum
day
day
0.005
0.005
0.90
1.98
600.00
103.77
487.00
368.00
3.00
0.52
438.30
728.64
Code
Description
Unit
Quantity
0101
Bhisti
TOTAL
TOTAL
Cost for 10sqm. or 0.9cum.
Rate per cum.
Say
day
0.05
16.52X
Code
0773
1980
0982
2208
2266
2203
0114
0101
9999
9999
16.52Y
Description
Unit
Sub Analysis 16.52X for use in sub

analysis of 16.52Y
Details of cost for 1cum of lime Flyash
mortar 1:2:3 (lime:2 flyash:3 coarse sand).
MATERIAL
Unslaked lime
Flyash
Carriage of Lime
Carriage of Surkhi
LABOUR
Labour for slaking the lime making, lime
putty, grinding, measuring, carrying,
depositing and mixing.
Beldar
Bhisti
Running and upkeep of mortar mill
Sundries
TOTAL
Cost of 1.00 cum
Say
20.35
5444.34
54.44
5498.78
824.82
6323.60
7026.22
7026.20
Quantity
Rate
Amount
quintal
cum
cum
cum
cum
cum
1.52
0.48
0.72
0.24
0.48
0.72
270.00
8.00
1200.00
103.77
103.77
103.77
410.40
3.84
864.00
24.90
49.81
74.71
day
day
L.S.
L.S.
0.90
0.45
26.91
13.52
368.00
407.00
1.73
1.73
331.20
183.15
46.55
23.39
2011.95
2011.95
2011.95
Unit
Quantity
cum
0.40
2011.95
804.78(A)
cum
0.64
1300.00
832.00
cum
0.21
1300.00
273.00
cum
0.85
103.77
88.20
Sub Analysis Y for Item Number 16.52

Description
16.52X
0295
Sub Analysis 'Y' (16.52Y) for use in Item

No. 16.52
Details of cost for 1 cum. of cement concrete
MATERIAL
Lime Flyash mortar
Rate as per sub analysis of Item No 16.52X
nominal size
nominal size
nominal size
2202
407.00
Amount
Sub Analysis X for sub analysis item Number 16.52Y
Code
0297
Rate
1010
Rate
Amount
Code
0114
0115
0101
0123
0124
0128
9999
9999
9999
16.53
Code
8691
8692
8693
9999
0114
0102
0103
Description
LABOUR
Beldar
Coolie
Bhisti
Mate
Sundries
Hire charges of steel moulds, table vibrators,
rammers, bolts, nuts and washers etc.
TOTAL
Cost of 1.00 cum
Say
Unit
Quantity
Rate
Amount
day
day
day
day
day
day
L.S.
L.S.
0.65
0.60
0.27
0.05
0.05
0.04
26.91
13.52
368.00
368.00
407.00
487.00
448.00
407.00
1.73
1.73
239.20
220.80
109.89
24.35
22.40
16.28
46.55
23.39
L.S.
53.82
1.73
93.11
2793.95
2793.95
2793.95
Providing and fixing concertina coil fencing with punched tape concertina coil 600
mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6
metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4
m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied
with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I.
barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge,
with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile
strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre
(cost of M.S. angle, C.C. blocks shall be paid separately)
Description
Unit
Details of cost for 30.00 m length

MATERIAL
Punched tape concertina coil 600 mm dia
10 m openable length (Total length 90 m)
(Having 50 Nos. of rounds per 6 meter = 1
bundles)
Therefore, Nos. of bundles 30/10=3bundles)
RBT reinforced barbed wire
9 rounds = 9x30 = 270m
Turn buckle and strengthening bolt
G.I. staples clips etc.
LABOUR
Labour for fixing straightening cutting of
tape/ coils & wire
Beldar
0.50x2 = 1.00 Nos (Taken double due to
height)
Total
Total
cost for 30.00 metre
cost per metre
Say
1011
Quantity
Rate
Amount
bundle
5.00
675.00
3375.00
metre
270.00
7.00
1890.00
each set
L.S.
10.00
49.40
40.00
1.73
400.00
85.46
day
1.00
368.00
368.00
day
day
0.50
0.50
487.00
448.00
243.50
224.00
6585.96
65.86
6651.82
997.77
7649.59
254.98
255.00
16.54
Providing and laying Dense Graded Bituminous Macadam using crushed stone
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site by tippers, laying with paver finisher equiped
with electronic sensor to the required grade, level and alignment and rolling with
smooth wheeled, vibratory and tandem rollers as per specifications to achieve the
desired compaction and density, complete as per specificatons and directions of
Engineer-in-Charge.
16.54.1
50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5%

(percentage by weight of total mix) and lime filler @ 2% (percentage by weight of
Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
Code
7309
2211
0294
0297
0297
0298
2903
2202
0777
2208
0062
Description
Details of cost for 195 cum (or 450 M.T. )
MATERIAL
(percentage by weight of total mix)
Aggregate
Total weight of mix = 450 tonnes
Weight of bitumen = 22.50 tonnes
Weight of aggregate = 450 -22.50 = 427.50
tonnes
Taking density of aggregate = 1.5 tonne/cum
Volume of aggregate =427.50/1.5 =285cum
Grading - II/19 mm (Nominal Size)
25 - 10mm size = 30% of 285 = 85.5 cum
10 - 5mm size = 28% of 285 = 79.8 cum
5mm and below = 40% of 285 = 114 cum
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 79.8 * 50 /100
nominal size
Qty = 79.8 * 50 /100
nominal size
Qty = 285 * 40 /100
nominal size
Lime Filler @ 2% ( percentage by weight
of aggregate)
Carriage of Lime
(consitering density of lime as 1.29 T
per cum) V =8.55/1.29 = 6.63 cum
V =8.55/1.29 = 6.63 cum
MACHINERY/ HIRE CHARGES:
Hot mix Plant -120 TPH capacity
1012
Unit
Quantity
Rate
Amount
tonne
22.50
30516.00
686610.00
tonne
22.50
103.77
2334.80
cum
42.75
1250.00
53437.50
cum
42.75
1300.00
55575.00
cum
39.90
1300.00
51870.00
cum
39.90
1300.00
51870.00
cum
114.00
1150.00
131100.00
cum
279.30
103.77
28982.60
quintal
cum
85.50
6.63
280.00
103.77
23940.00
687.99
hour
3.00
15000.00
45000.00
Code
Description
Unit
Quantity
0063
0064
Hot mix Plant 100 TPH Capacity

Paver finisher Hydrostatic with sensor
control 100 TPH
Generator 250 KVA
Front end loader 1 cum bucket capacity
(incl POL)
Tipper -5 Cum
Add 10 per cent of cost of carriage to cove
r cost of loading and unloading
Smooth Wheeled Roller 8 to 10 tonne
for initial break down rolling.(6*0.65)
Vibratory roller 8 to 10 tonne
for intermediate rolling.(6*0.65)
Tandem Road Roller
Finish rolling with 6-8 tonnes smooth
wheeled tandem roller.(6*0.65)
LABOUR
Mate
Beldar
working with HMP, mechanical broom,
paver, roller, asphalt cutter and assistance
for setting out lines, levels and layout of
construction
for checking line & levels
Total
Total
Cost for 195 cum(450 M.T.)
Cost per cum.
Say
hour
3.00
13000.00
39000.00
hour
hour
6.00
6.00
1500.00
400.00
9000.00
2400.00
6.00
4500.00
800.00
3.00
4800.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
day
5.00
407.00
2035.00
0069
0052
0053
0055
0054
0056
0128
0114
0139
16.54.2
Code
7309
2211
hour
tonne km
Rate
Amount
1216786.77
12167.87
1228954.64
184343.20
1413297.84
7247.68
7247.70
50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5%

(percentage by weight of total mix) and lime filler @ 2% (percentage by weight of
Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.
Description
MATERIAL
(percentage by weight of total mix)
Aggregate
Weight of aggregate = 450 -22.50
= 427.50 tonnes
25 - 10mm size = 30% of 285 = 85.5 cum
10 - 5mm size = 28% of 285 = 79.8 cum
5mm and below = 40% of 285 = 114 cum
1013
Unit
Quantity
Rate
Amount
tonne
22.50
30516.00
686610.00
tonne
22.50
103.77
2334.80
Code
Description
0294

nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 79.8 * 50 /100
nominal size
Qty = 79.8 * 50 /100
nominal size
Qty = 285 * 40 /100
nominal size
Lime Filler @ 2% ( percentage by weight of
aggregate)
Carriage of Lime
per cum) V =8.55/1.29 = 6.63 cum
V =8.55/1.29 = 6.63 cum
Drum Type HMP of 60-90 TPH capacity @
75 tonne per hour actual output
control 100 TPH
Generator 250 KVA
(incl POL)
Tipper -5 Cum
Add 10 per cent of cost of carriage to
cover cost of loading and unloading
Tandem Road Roller
LABOUR
Mate
Beldar
construction
Total
Total
Cost per cum.
Say
0297
0297
0298
2903
2202
0777
2208
0076
0064
0069
0052
0053
0055
0054
0056
0128
0114
0139
1014
Unit
Quantity
cum
42.75
1250.00
53437.50
cum
42.75
1300.00
55575.00
cum
39.90
1300.00
51870.00
cum
39.90
1300.00
51870.00
cum
114.00
1150.00
131100.00
cum
279.30
103.77
28982.60
quintal
cum
85.50
6.63
280.00
103.77
23940.00
687.99
hour
6.00
11000.00
66000.00
hour
hour
6.00
6.00
1500.00
400.00
9000.00
2400.00
6.00
4500.00
800.00
3.00
4800.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
day
5.00
407.00
2035.00
hour
tonne km
Rate
Amount
1198786.77
11987.87
1210774.64
181616.20
1392390.84
7140.46
7140.45
16.55
Providing and laying bituminous macadam using crushed stone aggregates of

specified grading premixed with bituminous binder, transported to site by tippers,
laid over a previously prepared surface with paver finisher equiped with electronic
sensor to the required grade, level and alignment and rolling with smooth wheeled,
vibratory and tandem rollers as per specifications to achieve the desired compaction
and density, complete as per specificatons and directions of Engineer-in-Charge.
16.55.1
50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50%

(percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100120 TPH capacity.
Code
7309
2211
0294
0297
0297
0298
2903
2202
0062
0063
0064
0069
Description
MATERIAL
3.5% of 450 MT = 15.75 MT
Weight of mix = 205 * 2.5 = 450 tonnes
Aggregate
Total weight of mix = 450 tonnes Weight of
bitumen = 15.75 tonnes Weight of
aggregate = 450 -15.75 = 434.25 tonnes
Volume of aggregate =434.25/1.5
=289.50cum
25 - 10mm size = 40% of 289.50 = 115.8 cum
10 - 5mm size = 40% of 289.50 = 115.8 cum
5mm and below = 20% of 289.50 = 57.9 cum
nominal size
Qty = 115.8 * 50 /100
nominal size
Qty = 115.8 * 50 /100
nominal size
Qty = 115.8 * 50 /100
nominal size
Qty = 115.8 * 50 /100
nominal size
Qty = 289.50 * 20 /100
nominal size
MACHINERY
@75tonne per hour actual output
control 100 TPH
Generator 250 KVA
1015
Unit
Quantity
Rate
Amount
tonne
15.75
30516.00
480627.00
tonne
15.75
103.77
1634.36
cum
57.90
1250.00
72375.00
cum
57.90
1300.00
75270.00
cum
57.90
1300.00
75270.00
cum
57.90
1300.00
75270.00
cum
57.90
1150.00
66585.00
cum
289.50
103.77
30041.04
hour
3.00
15000.00
45000.00
hour
3.00
13000.00
39000.00
hour
6.00
1500.00
9000.00
hour
6.00
400.00
2400.00
Code
Description
0052

(incl POL)
Tipper -5 Cum
X * 10 / 100 = 13500.00 * 10 / 100
Tandem Road Roller
LABOUR
Mate
Beldar
construction
Total
Total
Cost per cum.
Say
0053
0055
0054
0056
0128
0114
0139
16.55.2
Code
7309
2211
Unit
hour
tonne km
Quantity
6.00
4500.00
Rate
800.00
3.00
Amount
4800.00
13500.00
1350.00
hour
3.90
200.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
day
5.00
407.00
2035.00
1007451.28
10074.51
1017525.79
152628.87
1170154.66
5708.07
5708.05
50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50%

(percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90
TPH capacity.
Description
MATERIAL
3.5% of 450 MT = 15.75 MT
Weight of mix = 205 * 2.5 = 450 tonnes
Aggregate
Total weight of mix = 450 tonnes Weight of
bitumen = 15.75 tonnes
Weight of aggregate = 450 -15.75 = 434.25
tonnes
=289.50cum
25 - 10mm size = 40% of 289.50 = 115.8 cum
10 - 5mm size = 40% of 289.50 = 115.8 cum
5mm and below = 20% of 289.50 = 57.9 cum
1016
Unit
Quantity
Rate
Amount
tonne
15.75
30516.00
480627.00
tonne
15.75
103.77
1634.36
Code
Description
0294

nominal size
Qty = 115.8 * 50 /100
nominal size
Qty = 115.8 * 50 /100
nominal size
Qty = 115.8 * 50 /100
nominal size
Qty = 115.8 * 50 /100
nominal size
Qty = 289.50 * 20 /100
nominal size
MACHINERY
control 100 TPH
Generator 250 KVA
(incl POL)
Tipper -5 Cum
Tandem Road Roller
LABOUR
Mate
Beldar
construction
Total
Total
Cost per cum.
Say
0297
0297
0298
2903
2202
0076
0064
0069
0052
0053
0055
0054
0056
0128
0114
0139
1017
Unit
Quantity
cum
57.90
1250.00
72375.00
cum
57.90
1300.00
75270.00
cum
57.90
1300.00
75270.00
cum
57.90
1300.00
75270.00
cum
57.90
1150.00
66585.00
cum
289.50
103.77
30041.04
hour
6.00
11000.00
66000.00
hour
6.00
1500.00
9000.00
hour
6.00
400.00
2400.00
6.00
4500.00
800.00
3.00
4800.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
day
5.00
407.00
2035.00
hour
tonne km
Rate
Amount
989451.28
9894.51
999345.79
149901.87
1149247.66
5606.08
5606.10
16.56
Providing and laying semi- dense Bituminous concrete using crushed stone
aggregates of specified grading, premixed with bituminous binder and filler,
transporting the hot mix to work site by tippers, laying with paver finisher equiped
with electronic sensor to the required grade, level and alignment and rolling with
smooth wheeled, vibratory and tandem rollers to achieve the desired compaction
and density as per specification, complete and as per directions of Engineer-inCharge.
16.56.1
25 mm compacted thickness with bitumen of grade VG-30 @ 5% (percentage by

weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate)
prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
Code
7309
2211
0296
0297
2903
2202
0777
2208
0062
0063
0064
Description
Details of cost for 195 cum (450 tonnes)
Area covered for 25 mm thickness=7800 sqm
MATERIAL
5% of 450 MT = 22.50 MT
Aggregate
Weight of aggregate = 450 -22.50 =
427.50 tonnes
9.5 - 4.75 mm size = 57% of 285
= 162.45 cum
4.75mm and below = 41% of 285
= 116.85 cum
nominal size
Qty = 162.45 * 50 /100
nominal size
Qty = 162.45 * 50 /100
nominal size
Qty = 285 * 41 /100
nominal size
of aggregate)
Carriage of Lime
per cum) V =8.55/1.29 = 6.63 cum
control 100 TPH
1018
Unit
Quantity
Rate
Amount
tonne
22.50
30516.00
686610.00
tonne
22.50
103.77
2334.80
cum
81.225
1300.00
105592.50
cum
81.225
1300.00
105592.50
cum
116.85
1150.00
134377.50
cum
279.30
103.77
28982.60
quintal
cum
85.50
6.63
280.00
103.77
23940.00
687.99
hour
3.00
15000.00
45000.00
hour
3.00
13000.00
39000.00
hour
6.00
1500.00
9000.00
Code
Description
Unit
Quantity
0069
0052
Generator 250 KVA

(incl POL)
Tipper -5 Cum
Tandem Road Roller
LABOUR
Mate
Beldar
construction
Total
Total
Cost for 7800 Sqm
Cost per sqm
Say
hour
6.00
400.00
2400.00
6.00
4500.00
800.00
3.00
4800.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
0053
0055
0054
0056
0128
0114
16.56.2
Code
7309
2211
0296
hour
tonne km
Rate
Amount
1216461.77
12164.62
1228626.39
184293.96
1412920.35
181.14
181.15
25 mm compacted thickness with bitumen of grade VG-30 @ 5% (percentage by

weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate)
prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.
Description
Area covered for 25 mm thickness=7800 sqm
MATERIAL
5% of 450 MT = 22.50 MT
Aggregate
427.50 tonnes
9.5 - 4.75 mm size = 57% of 285 = 162.45 cum
4.75mm and below = 41% of 285 = 116.85 cum
nominal size
Qty = 162.45 * 50 /100
1019
Unit
Quantity
Rate
Amount
tonne
22.50
30516.00
686610.00
tonne
22.50
103.77
2334.80
cum
81.225
1300.00
105592.50
Code
Description
0297

nominal size
Qty = 162.45 * 50 /100
nominal size
Qty = 285 * 41 /100
nominal size
aggregate)
Carriage of Lime
(consitering density of lime as 1.29 T per cum)
V =8.55/1.29 = 6.63 cum
Paver finisher Hydrostatic with sensor control
100 TPH
Generator 250 KVA
(incl POL)
Tipper -5 Cum
Add 10 per cent of cost of carriage to cover
cost of loading and unloading
Tandem Road Roller
LABOUR
Mate
Beldar
construction
Total
Total
Cost for 7800 Sqm
Cost per sqm
Say
2903
2202
0777
2208
0076
0064
0069
0052
0053
0055
0054
0056
0128
0114
1020
Unit
Quantity
cum
81.225
1300.00
105592.50
cum
116.85
1150.00
134377.50
cum
279.30
103.77
28982.60
quintal
cum
85.5
6.63
280.00
103.77
23940.00
687.99
hour
6.00
11000.00
66000.00
hour
6.00
1500.00
9000.00
hour
6.00
400.00
2400.00
6.00
4500.00
800.00
3.00
4800.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
hour
tonne km
Rate
Amount
1198461.77
11984.62
1210446.39
181566.96
1392013.35
178.46
178.45
16.57
Providing and laying Bituminous concrete using crushed stone aggregates of

specified grading, premixed with bituminous binder and filler, transporting the hot
mix to work site by tippers, laying with paver finisher equiped with electronic sensor
to the required grade, level and alignment and rolling with smooth wheeled, vibratory
and tandem rollers to achieve the desired compaction and density as per
specification, complete and as per directions of Engineer-in-Charge.
16.57.1
40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage

by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate)
Code
7309
2211
0296
0297
0297
0298
2903
2202
0777
2208
Description
MATERIAL
@5.50% (percentage by weight of total mix
Aggregate
425.25 tonnes
Volume of aggregate =425.25/1.5 =283.50cum
13.2 - 10mm size = 30% of 283.50 =
85.05 cum
10 - 5mm size = 25% of 283.50 =
70.88 cum
5mm and below = 42% of 283.50 =
119.07 cum
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 283.5 * 40 /100
nominal size
of aggregate)
Carriage of Lime
per cum) V = 12.758/1.29 = 9.89 cum
1021
Unit
Quantity
Rate
Amount
tonne
24.75
30516.00
755271.00
tonne
24.75
103.77
2568.28
cum
42.525
1300.00
55282.50
cum
42.525
1300.00
55282.50
cum
35.44
1300.00
46072.00
cum
35.44
1300.00
46072.00
cum
119.07
1150.00
136930.50
cum
275.00
103.77
28536.39
quintal
cum
127.60
9.89
280.00
103.77
35728.00
1026.27
Code
0062
0063
0064
0069
0052
0053
0055
0054
0056
0128
0114
0139
16.57.2
Code
7309
2211
Description
control 100 TPH
Generator 250 KVA
(incl POL)
Tipper -5 Cum
Tandem Road Roller
LABOUR
Mate
Beldar
construction
Total
Total
Cost for 191 cum(450 Tonne)
Cost per cum.
Say
Unit
Quantity
hour
hour
3.00
3.00
15000.00
13000.00
45000.00
39000.00
hour
hour
6.00
6.00
1500.00
400.00
9000.00
2400.00
6.00
4500.00
800.00
3.00
4800.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
day
5.00
407.00
2035.00
hour
tonne km
Rate
Amount
1293148.32
12931.48
1306079.80
195911.97
1501991.77
7863.83
7863.85

and waste plastic additive @ 8% (percentage by weight of bitumen) prepared in
Batch Type Hot Mix Plant of 100- 120 TPH capacity.
Description
MATERIAL
Aggregate
425.25 tonnes
1022
Unit
Quantity
Rate
Amount
tonne
24.75
30516.00
755271.00
tonne
24.75
103.77
2568.28
Code
7280
0296
0297
0297
0298
2903
2202
0777
2208
0062
0063
0064
0069
0052
0053
0055
0054
0056
0128
0114
Description
13.2 - 10mm size = 30% of 283.50
= 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =
119.07 cum
Waste Plastic @ 8% of the weigh of bitumen
i.e. 24.75*8%
Waste plastic additive
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 283.5 * 40 /100
nominal size
aggregate)
Carriage of Lime
per cum) V = 12.758/1.29 = 9.89 cum
control 100 TPH
Generator 250 KVA
(incl POL)
Tipper -5 Cum
Tandem Road Roller
LABOUR
Mate
Beldar
construction
1023
Unit
Quantity
Rate
Amount
tonne
1.98
40000.00
79200.00
cum
42.525
1300.00
55282.50
cum
42.525
1300.00
55282.50
cum
35.44
1300.00
46072.00
cum
35.44
1300.00
46072.00
cum
119.07
1150.00
136930.50
cum
275.00
103.77
28536.39
quintal
cum
127.60
9.89
280.00
103.77
35728.00
1026.27
hour
hour
3.00
3.00
15000.00
13000.00
45000.00
39000.00
hour
hour
6.00
6.00
1500.00
400.00
9000.00
2400.00
hour
tonne km
6.00
4500
800.00
3.00
4800.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
Code
Description
Unit
Quantity
0139

Total
Total
Cost per cum.
Say
day
5.00
16.57.3
Code
0312
2211
0296
0297
0297
0298
2903
2202
Rate
407.00
Amount
2035.00
1372348.32
13723.48
1386071.80
207910.77
1593982.57
8345.45
8345.45
40/50 mm compacted thickness with bitumen of grade PMB-40 @ 5.5% (percentage

Description
MATERIAL
Bitumen grade PMB - 40
Aggregate
425.25 tonnes
13.2 - 10mm size = 30% of 283.50
= 85.05 cum
10 - 5mm size = 25% of 283.50
= 70.88 cum
5mm and below = 42% of 283.50
= 119.07 cum
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 283.5 * 40 /100
nominal size
of aggregate)
1024
Unit
Quantity
Rate
Amount
M.T.
24.75
38550.00
954112.50
tonne
24.75
103.77
2568.28
cum
42.525
1300.00
55282.50
cum
42.525
1300.00
55282.50
cum
35.44
1300.00
46072.00
cum
35.44
1300.00
46072.00
cum
119.07
1150.00
136930.50
cum
275.00
103.77
28536.39
Code
Description
0777
2208

Carriage of Lime
per cum) V = 12.758/1.29 = 9.89 cum
control 100 TPH
Generator 250 KVA
(incl POL)
Tipper -5 Cum
Tandem Road Roller
LABOUR
Mate
Beldar
construction
Total
Total
Cost per cum.
Say
0062
0063
0064
0069
0052
0053
0055
0054
0056
0128
0114
0139
16.57.4
Code
7741
2211
Unit
quintal
cum
Quantity
Rate
Amount
127.60
9.89
280.00
103.77
35728.00
1026.27
hour
hour
3.00
3.00
15000.00
13000.00
45000.00
39000.00
hour
hour
6.00
6.00
1500.00
400.00
9000.00
2400.00
6.00
4500.00
800.00
3.00
4800.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
day
5.00
407.00
2035.00
hour
tonne km
1491989.82
14919.90
1506909.72
226036.46
1732946.18
9073.01
9073.00
40/50 mm compacted thickness with bitumen of grade CRMB-60 @ 5.5% (percentage

Description
MATERIAL
CRMB - 60
Aggregate
1025
Unit
Quantity
Rate
Amount
tonne
24.75
34006.00
841648.50
tonne
24.75
103.77
2568.28
Code
0296
0297
0297
0298
2903
2202
0777
2208
0062
0063
0064
0069
0052
0053
0055
0054
0056
0128
Description
425.25 tonnes
=283.50cum
13.2 - 10mm size = 30% of 283.50
= 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =
119.07 cum
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 283.5 * 40 /100
nominal size
aggregate)
Carriage of Lime
(consitering density of lime as 1.29 T per
cum) V = 12.758/1.29 = 9.89 cum
control 100 TPH
Generator 250 KVA
(incl POL)
Tipper -5 Cum
Tandem Road Roller
LABOUR
Mate
1026
Unit
Quantity
Rate
cum
42.525
1300.00
55282.50
cum
42.525
1300.00
55282.50
cum
35.44
1300.00
46072.00
cum
35.44
1300.00
46072.00
cum
119.07
1150.00
136930.50
cum
275.00
103.77
28536.39
quintal
cum
127.60
9.89
280.00
103.77
35728.00
1026.27
hour
hour
3.00
3.00
15000.00
13000.00
45000.00
39000.00
hour
hour
6.00
6.00
1500.00
400.00
9000.00
2400.00
6.00
4500.00
800.00
3.00
4800.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
0.84
407.00
341.88
hour
tonne km
Amount
Code
Description
Unit
Quantity
0114
Beldar
construction
Total
Total
Cost per cum.
Say
day
14.00
368.00
5152.00
day
5.00
407.00
2035.00
0139
16.57.5
Code
7309
2211
0296
0297
0297
0298
Rate
Amount
1379525.82
13795.26
1393321.08
208998.16
1602319.24
8389.10
8389.10

prepared in drum Type Hot Mix Plant of 60-90 TPH capacity.
Description
MATERIAL
Aggregate
Weight of aggregate = 450 -24.75
= 425.25 tonnes
=283.50cum
13.2 - 10mm size = 30% of 283.50
= 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
= 119.07 cum
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 70.88 * 50 /100
1027
Unit
Quantity
Rate
Amount
tonne
24.75
30516.00
755271.00
tonne
24.75
103.77
2568.28
cum
42.525
1300.00
55282.50
cum
42.525
1300.00
55282.50
cum
35.44
1300.00
46072.00
cum
35.44
1300.00
46072.00
Code
Description
2903

nominal size
Qty = 283.5 * 40 /100
nominal size
aggregate)
Carriage of Lime
(consitering density of lime as 1.29 T per
cum) V = 12.758/1.29 = 9.89 cum
Drum Type HMP of 60-90 TPH capacity
@ 75 tonne per hour actual output
control 100 TPH
Generator 250 KVA
(incl POL)
Tipper -5 Cum
Tandem Road Roller
LABOUR
Mate
Beldar
construction
Total
Total
Cost per cum.
Say
2202
0777
2208
0076
0064
0069
0052
0053
0055
0054
0056
0128
0114
0139
1028
Unit
Quantity
Rate
Amount
cum
119.07
1150.00
136930.50
cum
275.00
103.77
28536.39
quintal
cum
127.60
9.89
280.00
103.77
35728.00
1026.27
hour
6.00
11000.00
66000.00
hour
hour
6.00
6.00
1500.00
400.00
9000.00
2400.00
6.00
4500.00
800.00
3.00
4800.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
day
5.00
407.00
2035.00
hour
tonne km
1275148.32
12751.48
1287899.80
193184.97
1481084.77
7754.37
7754.35
16.57.6
Code
7309
2211
7280
0296
0297
0297
0298
2903
2202
0777
2208
0076
0064

and waste plastic additive @ 8% (percentage by weight of bitumen) prepared in
drum Type Hot Mix Plant of 60-90 TPH capacity.
Description
MATERIAL
Waste Plastic @ 8% of the weigh of bitumen
i.e. 24.75*8%
Waste plastic additive
Aggregate
425.25 tonnes
=283.50cum
13.2 - 10mm size = 30% of 283.50
= 85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
= 119.07 cum
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 283.5 * 40 /100
nominal size
of aggregate)
Carriage of Lime
per cum) V = 12.758/1.29 = 9.89 cum
control 100 TPH
1029
Unit
Quantity
Rate
Amount
tonne
24.75
30516.00
755271.00
tonne
24.75
103.77
2568.28
tonne
1.98
40000.00
79200.00
cum
42.525
1300.00
55282.50
cum
42.525
1300.00
55282.50
cum
35.44
1300.00
46072.00
cum
35.44
1300.00
46072.00
cum
119.07
1150.00
136930.50
cum
275.00
103.77
28536.39
quintal
cum
127.60
9.89
280.00
103.77
35728.00
1026.27
hour
6.00
11000.00
66000.00
hour
6.00
1500.00
9000.00
Code
Description
Unit
Quantity
0069
0052
Generator 250 KVA

(incl POL)
Tipper -5 Cum
Tandem Road Roller
LABOUR
Mate
Beldar
construction
Total
Total
Cost per cum.
Say
hour
6.00
400.00
2400.00
6.00
4500.00
800.00
3.00
4800.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
day
5.00
407.00
2035.00
0053
0055
0054
0056
0128
0114
0139
16.57.7
Code
0312
2211
hour
tonne km
Rate
Amount
1354348.32
13543.48
1367891.80
205183.77
1573075.57
8235.99
8236.00
40/50 mm compacted thickness with bitumen of grade PMB-40 @ 5.5% (percentage

prepared in drum Type Hot Mix Plant of 60-90 TPH capacity.
Description
MATERIAL
Bitumen grade PMB - 40
Aggregate
425.25 tonnes
=283.50cum
13.2 - 10mm size = 30% of 283.50
= 85.05 cum
10 - 5mm size = 25% of 283.50 =
70.88 cum
5mm and below = 42% of 283.50 =
119.07 cum
1030
Unit
Quantity
Rate
Amount
M.T.
24.75
38550.00
954112.50
tonne
24.75
103.77
2568.28
Code
Description
0296

nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 283.5 * 40 /100
nominal size
aggregate)
Carriage of Lime
per cum) V = 12.758/1.29 = 9.89 cum
control 100 TPH
Generator 250 KVA
(incl POL)
Tipper -5 Cum
Tandem Road Roller
LABOUR
Mate
Beldar
construction
Total
Total
Cost per cum.
Say
0297
0297
0298
2903
2202
0777
2208
0076
0064
0069
0052
0053
0055
0054
0056
0128
0114
0139
1031
Unit
Quantity
Rate
cum
42.525
1300.00
55282.50
cum
42.525
1300.00
55282.50
cum
35.44
1300.00
46072.00
cum
35.44
1300.00
46072.00
cum
119.07
1150.00
136930.50
cum
275.00
103.77
28536.39
quintal
cum
127.60
9.89
280.00
103.77
35728.00
1026.27
hour
6.00
11000.00
66000.00
hour
hour
6.00
6.00
1500.00
400.00
9000.00
2400.00
6.00
4500.00
800.00
3.00
4800.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
day
5.00
407.00
2035.00
hour
tonne km
Amount
1473989.82
14739.90
1488729.72
223309.46
1712039.18
8963.55
8963.55
16.57.8
Code
7741
2211
0296
0297
0297
0298
2903
2202
0777
2208
0076
0064
0069
0052
40/50 mm compacted thickness with bitumen of grade CRMB-60 @ 5.5% (percentage

prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.
Description
MATERIAL
CRMB - 60
Aggregate
425.25 tonnes
Volume of aggregate =425.25/1.5 =
283.50cum
13.2 - 10mm size = 30% of 283.50 =
85.05 cum
10 - 5mm size = 25% of 283.50 = 70.88 cum
5mm and below = 42% of 283.50 =
119.07 cum
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 85.5 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 70.88 * 50 /100
nominal size
Qty = 283.5 * 40 /100
nominal size
aggregate)
Carriage of Lime
per cum) V = 12.758/1.29 = 9.89 cum
control 100 TPH
Generator 250 KVA
(incl POL)
1032
Unit
Quantity
Rate
Amount
tonne
24.75
34006.00
841648.50
tonne
24.75
103.77
2568.28
cum
42.525
1300.00
55282.50
cum
42.525
1300.00
55282.50
cum
35.44
1300.00
46072.00
cum
35.44
1300.00
46072.00
cum
119.07
1150.00
136930.50
cum
275.00
103.77
28536.39
quintal
cum
127.60
9.89
280.00
103.77
35728.00
1026.27
hour
6.00
11000.00
66000.00
hour
hour
6.00
6.00
1500.00
400.00
9000.00
2400.00
hour
6.00
800.00
4800.00
Code
Description
0053
Tipper -5 Cum
Tandem Road Roller
LABOUR
Mate
Beldar
construction
Total
Total
Cost per cum.
Say
0055
0054
0056
0128
0114
0139
16.59
Unit
tonne km
Quantity
Rate
Amount
4500.00
3.00
13500.00
hour
3.90
200.00
1350.00
780.00
hour
3.90
650.00
2535.00
hour
3.90
1150.00
4485.00
day
day
0.84
14.00
407.00
368.00
341.88
5152.00
day
5.00
407.00
2035.00
1361525.82
13615.26
1375141.08
206271.16
1581412.24
8279.64
8279.65
Manufacturing, supplying and fixing retro reflective sign boards made up of 2

mm thick aluminium sheet, face to be fully covered with high intensity
encapsulated type heat activated retro reflective sheeting conforming to type IV of ASTM-D 4956-01 in blue and silver white or other colour combination
including subject matter, message (bi-lingual), symbols and borders etc. as per
IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be
activated by applying heat and pressure conforming to class -2 of ASTM-D4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm
c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft
resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5
mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded
with base plate of size 100x100x5 mm at the bottom end and including making
holes in pipes, angles flats, providing & fixing M.S. message plate of required
size, steel work to be painted with two or more coats of synthetic enamel paint
of required shade and of approved brand & manufacture over priming coat of
zinc chromate yellow primer (vertical MS-Tee support to be painted in black
and white colours).Backside of aluminium sheet to be painted with two or more
coats of epoxy paint over and including appropriate priming coat including all
leads and lifts etc. complete as per drawing , specification and direction of
Engineer--in-charge.
1033
16.59.1
Code
2704
2302
8690
10.2
0128
0114
9999
Mandatory/ Regulatory sign boards of 900 mm diametre with support length of

3750 mm
Description
Details cost for 1 no. of 0.636 sqm
MATERIAL
Aluminium sheet 2 mm thick
3.14/4x(0.9)x(0.9)=0.636 sqm
add 10% wastage = 0.064 i.e. 0.700sqm
@ 5.60kg/ sqm = 3.92kg
Aluminium Strip 40 mm wide and 2 mm thick
Carriage of G.I. sheet and accessories
3.92kg or 0.00392 MT
High intensity retro reflective sheet
= 0.70 sqm.
High intensity sheet for lettering / sign and
border etc.
Taking 40% Area =0.28sqm,total = 0.70 +
0.28 = 0.98 sqm
High intensity retro - reflective sheet
Steel work
Supporting frame 25x25x3mm for 900mm
dia board:3.14D=3.1416x0.90=2.83 metre
@ 1.10kg/m
=3.11kg
Angle iron 35x35x.5mm for fixing the
support frame with vertical Tee-iron support
post
2x0.05=0.10m @ 2.6 kg/m = 0.26kg
Vertical post of M.S. tee of section
ISNT 50x50x6mm = 3.75 metre
@ 4.50kg/m = 16.88 kg
Bass plate to be welded at bottom end of
tee (As hold fast)
(100x100x5mm)x7850/133)=0.39kg, total
= 3.11 + 0.26 +16.88 + 0.39 = 20.64kg.
Add wastage @ 5% = 1.03
Total = 20.64 + 1.03 = 21.67kg.
Rate as per item no 10.2 of SH : Steel work
LABOUR
Mate
Beldar
Cost of material for drilling holes, nut bolts
& rivets, fabrication etc.
Painting with synthetic enamel paint on
steel work
support frame 25x25x3mm
=2.83x0.10=0.283 sqm
Fixing angle 35x35x5mm
= 2x0.50x0.14=0.014 sqm
Vertical post Tee 50x50x6mm
=3.75x0.20=0.750sqm
Base plate 100x100x5mm
Surface area = 2x[0.10x0.10] =0.02
4x0.10x0.005 = 0.002
Total = 1.069 sqm
1034
Unit
Quantity
kilogram
tonne
3.92
0.00392
Rate
225.00
92.24
Amount
882.00
0.36
sqm
0.98
1525.00 1494.50(A)
kg
21.67
67.60
1464.89
day
day
0.01
0.25
407.00
368.00
4.07
92.00
L.S.
65.00
1.73
112.45
Code
Description
Unit
Quantity
13.61.1

Painting with epoxy paint on back side of
aluminium sheet.
Rate as per Item no. 13.52.1 of SH: Finishing
Sundries and hold fast etc.
Total
i.e. on (4347.01 - 1626.69) = 2720.32
Total
- 1626.69) = 2747.52
Cost of 1 no.
Say
sqm
1.07
78.40
83.89(A)
sqm
L.S.
0.636
78.00
122.50
1.73
77.91(A)
134.94
4347.01
13.52.1
9999
16.59.2
Code
2704
2302
8690
10.2
Rate
Amount
27.20
4374.21
412.13
4786.34
4786.35
Cautionary /warning sign boards of equilateral triangular shape having each side
of 900 mm with support length of 3650 mm
Description
Details cost for 1 board of 0.35 sqm
MATERIAL
Aluminium sheet 2 mm thick
Area 1/2x(0.9)x(0.78)=0.35 sqm
add 10% wastage = 0.04 i.e. 0.39sqm @
5.60kg/ sqm = 2.18kg
2.18kg or 0.00218 MT
High intensity retro reflective sheet =
0.39 sqm.
High intensity sheet for lettering / sign/
symbol/ border etc.
Taking 40% Area =0.16sqm, total = 0.39 +
0.16 = 0.55 sqm
Steel work
Angle iron frame 25x25x3mm 3x0.90=
2.70 metre
@ 1.10kg/m
=2.97kg
Angle iron 35x35x.5mm for fixing the
support frame to Tee- iron support post
2x0.05=0.10m @ 2.6 kg/m = 0.26kg
Vertical post of M.S. tee of section
ISNT 50x50x6mm = 1x3.65=3.65m @
4.50kg/m =16.43kg
Bass plate 100x100x5mm connected to
bottom end of vertocal tee.
(0.10x0.10x0.005x7850kg =0.39kg, total
= 2.97 + 0.26 + 16.43 + 0.39 = 20.05kg.
Add wastage @ 5% = 1.00, total = 20.05 +
1.00 = 21.05kg
1035
Unit
Quantity
Rate
Amount
kilogram
tonne
2.18
0.00218
225.00
92.24
490.50
0.20
sqm
0.55
1525.00
838.75
kg
21.05
67.60 1422.98(A)
Code
0128
0114
9999
13.61.1
13.52.1
9999
16.60
Description
LABOUR
Mate
Beldar
Cost of material for drilling holes, nut bolts
& rivets, fabrication etc.
Painting with synthetic enamel paint on
Angle iron .
support frame 25x25x3mm
=1x2.7x0.10=0.27 sqm.
Angle 35x35x5mm
= 2x0.50x0.14=0.014 sqm
Tee 50x50x6mm
=1x3.65x0.20 =0.73sqm
Base plate to be welded at bottom end of
Tee 100x100x5mm
0.022 sqm
Total = 1.036 sqm
aluminium sheet. 0.35 sqm
Sundries & hold fast etc.
Total
i.e. on (3197.50 - 1547.08) = 1650.42
Total
- 1547.08) = 1666.92
Cost of 1 board.
Say
Unit
Quantity
Rate
Amount
day
day
0.01
0.25
407.00
368.00
4.07
92.00
L.S.
65.00
1.73
112.45
sqm
1.036
78.40
81.22(A)
sqm
L.S.
0.35
65.00
122.50
1.73
42.88(A)
112.45
3197.50
16.50
3214.00
250.04
3464.04
3464.05
Manufacturing, supplying and fixing retro reflective overhead signage boards

made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity
and encapsulated lens type heat activated retro reflective sheeting conforming to
type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders
etc. as per IRC : 67-2001 in silver white with blue colour back ground and with
high intensity grade, pasted on substrate by pressure sensitive adhesive backing
which shall be activated by applying pressure conforming to class II of ASTM-D4956-01 and fixing the same to the plate of structural frame work by means of
suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre
all along the periphery as well as in two vertical rows along with theft resistant
measures, including the cost of painting with two or more coats of epoxy paint in
grey colour on the back side of aluminium sheet including appropriate priming
coat. The rate includes the cost of rounding off the corners, lowering down the
structural frame work from the gantry, fixing and erecting the same in position all
complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately.
Rectangular area of the sheet only shall be measured for payment).
1036
16.60.1
Code
2704
2302
8690
0588
9999
9999
9999
13.52.1
16.61
Code
Overhead informatory road signage

Description
Unit
Details of cost for boards area 3.00x1.20

=3.60 sqm
MATERIAL
Total = 20.16 + 1.01 = 21.17 kg.
high itensity sheet for written matter.
Taking 40% 3.60x40% = 1.44 sqm.
Total = 3.60 + 1.44 = 5.04 sqm.
for peripheries = 2x(300+120)/30=28 nos.
For vertical Rows = 2x (120/30-2)=4 nos.
Total= 28 + 4 = 32nos.
For wastage @ 5% =2 nos.
Total = 32 +2 = 34 nos.
Labour charges for drilling holes
Hire charges of drill machine and sundries
Hoisting board
Labour charges for manufacturing of board
including .
fixing retro reflective sheet
Aluminium sheet,
Total
i.e. on (14697.53 - 441.00) = 14256.53
Total
- 441.00) = 14399.10
Cost of 3.60 sqm
Cost of 1 sqm.
Say
kilogram
Quantity
Rate
Amount
21.17
225.00
4763.25
0.02117
92.24
1.95
5.04
0.34
1525.00
190.00
7686.00
64.60
L.S.
L.S.
52.00
390.00
1.73
1.73
89.96
674.70
L.S.
564.20
1.73
976.07
sqm
3.60
122.50
441.00(A)
14697.53
tonne
sqm
100 Nos
142.57
14840.10
2159.87
16999.97
4722.21
4722.20
Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out
of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated
lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter,
symbols, borders etc. will be as per IRC - 67 with required colour scheme on the
boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S.
frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm
square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with
adequate anti-theft arrangement .Sheet work to be painted with two or more coats of
synthetic enamel paint over an under coat (primer) and back side of aluminium sheet
to be painted with two or more coats of epoxy paint including appropriate priming
coat complete in all respects as per direction of Engineer-in-charge.
Description
Unit
Details cost for one board of 0.635 sqm

Aluminium sheet 2mm thick = 0.635 sqm.
1037
Quantity
Rate
Amount
Code
2704
8690
10.2
0128
0114
9999
13.61.1
13.52.1
9999
16.62
Code
Description
Add 10% wastage = 0.06 sqm, total =
0.635 + 0.06 = 0.695 sqm.
Say 0.70 sqm @ 5.6kg/sqm = 3.98 kg
MATERIAL
High intensity retro reflective sheet = 0.70 sqm
high intensity sheet for lettering/ sing and
border etc.
Taking 40% Area=0.28 sqm, total = 0.70 +
0.28 = 0.98 sqm.
Angle iron 40x40x4mm = 4x0.60=2.40@
2.4kg/ mtr = 5.76 kg
50x50x5 mm = 2x4m =8m @ 3kg/ mtr
=24.00 kg
Total = 5.76 + 24.00 = 29.76 kg
LABOUR
Mate
Beldar
Cost of material for drilling holes, nut bolts &
rivets, facrication etc. @ 2% on ( X + Y + A).
(e) Painting with synthetic enamel paint
1x2.40.12=0.29 sqm
1x4.00x0.12=0.80 sqm,
Total = 0.29 + 0.80 = 1.09 sqm
aluminium sheet, Rate as per Item
no. 13.52.1 of SH: Finishing
Sundries & hole fast etc,
Total
i.e. on (4836.58 - 2175.03) = 2661.55
Total
= 2688.17
Cost for 1 board
Say
Unit
Quantity
Rate
Amount
kilogram
3.98
225.00
895.50
sqm
0.98
1525.00
1494.50
kg
29.76
67.60
2011.78(A)
day
day
0.01
0.25
407.00
368.00
4.07
92.00
L.S.
70.23
1.73
121.50
sqm
1.09
78.40
85.46A)
sqm
L.S.
0.635
31.20
122.50
1.73
77.79A)
53.98
4836.58
26.62
4863.20
403.23
5266.43
5266.45
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified
shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic
paint applicator machine fitted with profile shoe, glass beads dispenser, propane
tank heater and profile shoe heater, driven by experienced operator on road surface
including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil,
grease and foreign material etc. complete as per direction of Engineer-in-charge and
accordance with applicable specifications.
Description
Unit
Details of cost for 200 sqm (Area covered

on one day):-
1038
Quantity
Rate
Amount
Code
8687
8688
0033
0083
1241
0157
0139
0114
16.63
Code
0287
2260
6501
2335
0114
0115
0101
Description
Unit
MATERIAL
Thermoplastic paint screeded in paint form
for 2.5 mm thick road making stripe
including glass beads etc. as pe
specifications
200 sqm @ 5kg/ sqm = 1000 kg
Wastage @ 5% = 50kg
Total = 1050 kg
Thermoplastic paint
Glass beads (B-class) to be sprayed over
the paint stripe @ 250 gms. Per sqm
= 100x0.25=25 kg
Glass beads
MACHINERY
Paint applicator.
Hire charges of TATA 407 or equivalent
for local shifting.
Commercial LPG in cylinder.
LABOUR
Operator (Pile/ Special machine)
Beldar
Total
Total
Cost for 200 sqm
Cost per sqm
Say
Quantity
Rate
Amount
kg
1050.00
47.00
49350.00
kg
50.00
60.00
3000.00
day
1.00
800.00
800.00
day
kg
1.00
142.00
1400.00
65.00
1400.00
9230.00
day
day
day
1.00
4.00
4.00
487.00
407.00
368.00
487.00
1628.00
1472.00
67367.00
673.67
68040.67
10206.10
78246.77
391.23
391.25
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement
concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal
size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and
consolidated and grouted with fine sand, including finishing the top smooth etc.
complete and as per direction of Engineer-in-charge.
Description
METERIAL
nominal size
Labour for spreading, ramming and
consolidation.
Beldar
Coolie
Bhisti
Cement concrete-1:3:6
1039
Unit
Quantity
Rate
Amount
cum
cum
cum
cum
1.00
1.00
0.08
0.08
750.00
112.79
600.00
103.77
750.00
112.79
48.00
8.30
day
day
day
0.35
0.26
0.18
368.00
368.00
407.00
128.80
95.68
73.26
Code
Description
4.1.6
Rate as per item no 4.1.6 of SH : Concrete

Work
Total
i.e. on (3624.11 - 2407.28) = 1216.83
Total
= 1229.00
Cost for 10 sqm.
Cost for 1 sqm.
Say
16.64
Code
0287
2260
6501
2335
0114
0115
0101
16.65
Unit
Quantity
cum
0.50
Rate
Amount
4814.55 2407.28(A)
3624.11
12.17
3636.28
184.35
3820.63
382.06
382.05
Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm

thick nominal size including spreading, well ramming, consolidating and grouting
with jamuna sand, including finishing smooth etc. complete as per direction of
Engineer-in-charge.
Description
METERIAL
nominal size
Labour for spreading, ramming and
consolidation.
Beldar
Coolie
Bhisti
Total
Total
Cost for 10 sqm.
Cost for 1 sqm.
Say
Unit
Quantity
Rate
Amount
cum
cum
cum
cum
1.00
1.00
0.08
0.08
750.00
112.79
600.00
103.77
750.00
112.79
48.00
8.30
day
day
day
0.35
0.26
0.18
368.00
368.00
407.00
128.80
95.68
73.26
1216.83
12.17
1229.00
184.35
1413.35
141.33
141.35
Providing and fixing post delineators made of ABS round body fitted with 2 nos 100
mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder
coated anti-rust and anti theft steel to be installed as per direction of Engineer-incharge.
Code
Description
Unit
Quantity
8685
9999

MATERIAL
Delineator
Fixing materials.
each
L.S.
1.00
78.00
1040
Rate
275.00
1.73
Amount
275.00
134.94
Code
Description
Unit
Quantity
9999
Fixing charges.
Total
Total
Cost of 1 no.
Say
L.S.
39.00
Rate
1.73
Amount
67.47
477.41
4.77
482.18
72.33
554.51
554.50
16.66
Excavating holes upto 0.10 cum, including getting out the excavated soil, then returning
the soil as deported in layers not exceeding 20 cm in depth, including consolidating
and deposited layer by ramming watering etc., disposing of surplus excavated soil
as directed with in a lead of 50 mm and lift upto 1.5 m.
16.66.1
All kind of soil
Code
2.8.1
9999
16.67
Code
8694
9977
3.10
Description
Details of cost for 30 holesEarth work 30x0.10 = 3.0 cum.
Extra labour for filling and ramming
Rate as per item no. 2.8.1 of SH: Earth work
Sundries
TOTAL
i.e. on (522.59 - 499.20) = 23.39
TOTAL
= 23.62
Cost of 30 holes
Cost of 1 hole
Say
Unit
Quantity
cum
L.S.
3.00
13.52
Rate
166.40
1.73
Amount
499.20(A)
23.39
522.59
0.23
522.82
3.54
526.36
17.54
17.55
Providing and fixing at or near ground level factory made RCC pavement slab of M30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4
nos on each side, including setting in position in footpath to the required level and
line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 coarse sand),
having joint thickness not more than 5mm except on curve, including filling of joints
with same cement mortar and making grooves etc. complete as per direction of
Engineer-in-charge.
Description
Unit
Quantity

MATERIAL
Precast pavement slab 450 x 450 x
50 mm (M - 30)
Carriage of slab.
20mm (bed and joints) CM. 1:5
(1 cement: 5 coarse sand)
each
L.S.
48.00
52.00
70.00
1.73
3360.00
89.96
cum
0.25
3565.05
891.26
1041
Rate
Amount
Code
0155
0100
0114
0101
9999
16.68
Code
8689
0982
2203
0983
2203
0123
0124
0114
0115
16.69
Description
LABOUR
Mason (average)
Bandhani
Beldar
Bhisti
Sundries
Total
Total
Cost for 10 sqm.
Cost for 1 sqm
Say
Unit
Quantity
day
day
day
day
L.S.
1.10
1.10
0.55
0.27
10.79
Rate
467.00
407.00
368.00
407.00
1.73
Amount
513.70
447.70
202.40
109.89
18.67
5633.58
56.34
5689.92
853.49
6543.41
654.34
654.35
Providing and laying 60mm thick faciory made cement concrete interlocking paver
block of M -30 grade made by block making machine with strong vibratory compaction,
of approved s;ze, design & shape, laid in required colour and pattern over and including
50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all
complete as per the direction of Engineer-in-charge.
Description
Details of cost for 10.00 sqm
MATERIAL
Interlocking C.C. paver block ( 60 mm
thick, M-30)
Bedding layer - 50mm thick
=10x0.050=0.50 cum
Fine sand (zone IV)
Laying charges (Bassed on actual
observation)
LABOUR
Beldar
Coolie
Total
Total
Cost for 10.00 sqm
Cost for 1.00 sqm.
Say
Unit
Quantity
Rate
Amount
sqm
10.00
350.00
3500.00
cum
0.50
1200.00
600.00
cum
cum
cum
0.50
0.15
0.15
103.77
760.00
103.77
51.88
114.00
15.57
day
day
day
day
0.50
0.50
1.00
0.50
487.00
448.00
368.00
368.00
243.50
224.00
368.00
184.00
5300.95
53.01
5353.96
803.09
6157.05
615.70
615.70
Providing and laying at or near ground level factory made kerb stone of M-25 grade
cement concrete in position to the required line, level and curvature, jointed with
cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without
grooves (thickness of joints except at sharp curve shall not to more than 5mm),
including making drainage opening wherever required complete etc. as per direction
1042
of Engineer-in-charge (length of finished kerb edging shall be measured for payment).

(Precast C.C. kerb stone shall be approved by Engineer-in-charge).
Code
8686
3.8
0123
0124
0114
0115
Description
Details of cost 100 metre i.e.
100x0.375x0.20=7.50 cum.
No. of kerb stones = 100/0.405=247 Nos
Precast C.C. Kerb stone M - 25 =
247x0.40x0.375x0.20=7.41 cum
METERIAL
Precast C.C. Kerb stone M - 25
Mortar 1:3 for fixing joints = 246x1x
[(0.115+0.20)/2] x 0.375x0.005 = 0.073 cum.
Labour for fixing of kerb stones
Beldar
Coolie
Total
Total
Cost of 7.50 cum
cost for 1 cum.
Say
Unit
Quantity
Rate
Amount
cum
7.41
3800.00
28158.00
cum
0.073
4723.50
344.82
day
day
day
day
2.50
2.50
2.50
1.65
487.00
448.00
368.00
368.00
1217.50
1120.00
920.00
607.20
32367.52
323.68
32691.20
4903.68
37594.88
5012.65
5012.65
16.70
Providing and fixing G.I. chain link fabric fencing of required width in mesh size
50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as
required complete as per the direction of Engineer-in-charge.
16.70.1
Made of G.I. wire of dia 4 mm
Code
8695
9977
0103
0114
9999
Description
MATERIAL
G.I. chain link 50x50 mm mesh = 10.00 sqm.
Wastage @ 5% = 0.50 sqm.
Total = 10.50 sqm.
Chain link fabric fencing mesh of size
50x50 mm made of G.I. wire of dia 4 mm
Carriage.
LABOUR
Beldar
Sundries including G.I. wire, nuts and bolts
and warshers.
Total
Total
Cost for 10 sqm.
Cost for 1 sqm.
Say
1043
Unit
Quantity
Rate
Amount
sqm
L.S.
10.50
156.00
258.00
1.73
2709.00
269.88
day
day
2.14
1.62
448.00
368.00
958.72
596.16
L.S.
174.75
1.73
302.32
4836.08
48.36
4884.44
732.67
5617.11
561.71
561.70
16.70.2
Code
8696
9977
0103
0114
9999
16.71
Code
8697
9977
0103
0114
9999
Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in
required colour and shade
Description
MATERIAL
G.I. chain link 50x50 mm mesh PVC
coated = 10.00 sqm.
Total = 10.50 sqm.
50x50 mm made of G.I. wire of dia 4 mm,
PVC coated to outer dia 5 mm
Carriage.
LABOUR
Beldar
and warshers.
Total
Total
Cost for 10 sqm.
Cost for 1 sqm.
Say
Unit
Quantity
Rate
Amount
sqm
L.S.
10.50
156.00
285.00
1.73
2992.50
269.88
day
day
2.14
1.62
448.00
368.00
958.72
596.16
L.S.
174.75
1.73
302.32
5119.58
51.20
5170.78
775.62
5946.40
594.64
594.65
Providing and fixing G.I. chain link fabric fencing of required width in mesh size
25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire
or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.
Description
MATERIAL
G.I. chain link 25x25 mm mesh = 10.00 sqm.
Total = 10.50 sqm.
25x25 mm made of G.I. wire of dia 3 mm
Carriage.
LABOUR
Beldar
and warshers.
Total
Total
Cost for 10 sqm.
Cost for 1 sqm.
Say
1044
Unit
Quantity
Rate
Amount
sqm
L.S.
10.50
156.00
285.00
1.73
3992.50
269.88
day
day
2.14
1.62
448.00
368.00
958.72
596.16
L.S.
174.75
1.73
302.32
5119.58
51.20
5170.78
775.62
5946.40
594.64
594.65
16.72
Code
1158
2215
16.73
Code
0123
0124
0114
0115
9999
Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site.
Description
Detail of cost for 2.25 cum
MATERIAL
22.5 cm thick stone (Hard)
Stone for pitching 15 cm x 22.5 cm
Carriage by mechanical transport i/c loading
unloading and stacking
Carriage of Soling stone & masonary stone
TOTAL
TOTAL
Cost for 2.25 cum
Cost for one cum
Say
Unit
Quantity
Rate
Amount
cum
2.25
636.00
1431.00
cum
2.25
122.08
274.68
1705.68
17.06
1722.74
258.41
1981.15
880.51
880.50
Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer
dressed stones having no side less than 15 cm, with minimum depth of 20 cm including
preparing the bedding surface etc. all complete. (Payment for Stone to be made
separately).
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost for 10 sqm
Cost for one sqm
Say
Unit
Quantity
day
day
day
day
L.S.
1.08
1.08
2.15
1.61
6.76
Rate
487.00
448.00
368.00
368.00
1.73
Amount
525.96
483.84
791.20
592.48
11.69
2405.17
24.05
2429.22
364.38
2793.60
279.36
279.35
16.74
75 mm thick back filling for pitching including supplying of required materials and
consolidation etc. complete with :
16.74.1
Moorum
Code
Description
0810
2265

MATERIAL
Moorum
Carriage by mechanical transport i/c
loading unloading and stacking
Carriage of Moorum
1045
Unit
Quantity
Rate
Amount
cum
7.50
450.00
3375.00
cum
7.50
103.77
778.27
Code
0114
0101
16.74.2
Code
0295
2202
0114
0101
16.74.3
Code
0293
2206
0114
0101
Description
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost for 100 sqm
Cost per sqm
Say
Unit
Quantity
Rate
day
day
1.64
0.13
Unit
Quantity
cum
7.50
1300.00
9750.00
cum
7.50
103.77
778.27
day
day
2.05
0.13
368.00
407.00
754.40
52.91
11335.58
113.36
11448.94
1717.34
13166.28
131.66
131.65
Unit
Quantity
cum
7.50
1250.00
9375.00
cum
7.50
112.79
845.94
day
day
2.05
0.13
368.00
407.00
754.40
52.91
11028.25
110.28
11138.53
1670.78
12809.31
128.09
128.10
368.00
407.00
Amount
603.52
52.91
4809.70
48.10
4857.80
728.67
5586.47
55.86
55.85
Stone aggregate 20 mm nominal size

Description
MATERIAL
nominal size
100sqm x7.50cm= 7.50 cum
nominal size
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost for 100 sqm
Cost per sqm
Say
Rate
Amount
Stone aggregate 40 mm nominal size

Description
MATERIAL
nominal size
100sqm x7.50cm= 7.50 cum
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost for 100 sqm
Cost per sqm
Say
1046
Rate
Amount
16.75
Code
5.37.1
9999
9999
16.76
Code
0367
2209
7318
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from
batching plant. The ready mixed concrete shall be laid and finished with screed board
vibrator , vacuum dewatering process and finally finished by floating, brooming with
wire brush etc. complete as per specifications and directions of Engineer-in-charge.
(The panel shuttering work shall be paid for separately). (Note:- Cement content
considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix
is payable/ recoverable separately).
Description
Details of cost for 1.00 cum
MATERIAL
Ready mix concrete M 25 = 1.00 cum. i/c
placing of concrete, vibrating, leveling etc.
Rate as per Item No.5.37.1 of SH:RCC
Operational charges for vacuum dewatering
system i/c screed vibration , placing of
filter mat , top mat, vacuum process,
floating ,
troweling, Brooming etc.
T& P charges i/c consumable power
charges, loading , unloading and hire
charges of equipments
Total
i.e. on (6884.53 - 6713.60) = 170.93
Total
- 6713.60) = 172.64
Cost for 1 cum
Say
Unit
Quantity
Rate
Amount
cum
1.00
L.S.
57.20
1.73
98.96
L.S.
41.60
1.73
71.97
6884.53
6713.60 6713.60(A)
1.71
6886.24
25.90
6912.14
6912.15
Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C.
pavement.
Description
Cement for M-25 mix = 0.410 t
Cement for M - 20 mix = 0.383 t
Difference = 0.027 t
METERIAL
Carriage of Cement
Plasticizer for M- 25 mix = 2.050kg
Plasticizer for M- 20 mix = 1.915 kg
Difference = 0.135 kg
Plasticizer / super plasticizer
Total
Total
Cost for 1 cum.
Say
1047
Unit
Quantity
Rate
Amount
tonne
tonne
0.027
0.027
5700.00
92.24
153.90
2.49
kilogram
0.135
38.00
5.13
161.52
1.62
163.14
24.47
187.61
187.60
16.77
Code
0128
0114
0038
0014
0017
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of

scarified material within all lifts and lead upto 1km (by mechanical means).
Description
LABOUR
Mate
Beldar
MACHINERY
Tractor with ripper attachment.
Front end loader capacity 1.00 cum
Hire and running charges of tipper
TOTAL
TOTAL
Cost for 100 sqm
Cost for 1 sqm
Say
Unit
Quantity
Rate
Amount
day
day
0.01
0.25
407.00
368.00
4.07
92.00
day
day
day
0.01
0.025
0.02875
1100.00
6000.00
1800.00
11.00
150.00
51.75
308.82
3.09
311.91
46.79
358.70
3.58
3.60
16.78
Construction of granular sub-base by providing close graded Material conforming to

specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material
by tippers to work site, for all leads & lifts, spreading in uniform layers of specified
thickness with motor grader on prepared surface and compacting with vibratory
power roller to achieve the desired density, complete as per specifications and
directions of Engineer-in-Charge.
16.78.1
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR
Value-30
Code
0292
0297
2206
2202
1179
2202
2903
2904
2203
Description
MATERIAL
Close graded graunlar sub-base material as
per Grading-I of specifications
53mm to 9.5mm @ 50% = 144 cum
9.5 mm to 2.36mm @ 20% = 57 cum
2.36mm below @ 30% = 86.40 cum
nominal size
nominal size
size and above
nominal size
nominal size
nominal size
nominal size
Machinery/ Hire charges:
1048
Unit
Quantity
Rate
Amount
cum
72.00
1150.00
82800.00
cum
72.00
1300.00
93600.00
cum
72.00
112.79
8121.03
cum
cum
72.00
57.00
103.77
900.00
7471.35
51300.00
cum
57.00
103.77
5914.82
cum
43.20
1150.00
49680.00
cum
cum
43.20
86.40
1150.00
103.77
49680.00
8965.62
Code
Description
Unit
Quantity
0059
Wet Mix Plant 60 TPH

@75 tonne capacity
Generator 100 KVA/125 KVA
Water Tanker 5 to 6 KL capacity
5 km lead with one trip per hour
(incl POL)
Tipper 10 tonne capacity( taking lead= 10
Km) =450x10 =4500 t.Km
Tipper -5 Cum
Motor Grader 3.35 metre blade
LABOUR
Mate
Beldar
Total
Total
Cost per cum.
Say
hour
6.00
750.00
4500.00
hour
hour
6.00
4.50
300.00
200.00
1800.00
900.00
hour
6.00
800.00
4800.00
4500.00
3.00
13500.00
hour
hour
6.00
6.00
2100.00
650.00
1350.00
12600.00
3900.00
day
day
day
0.40
2.00
8.00
407.00
407.00
368.00
0070
0057
0052
0053
0050
0054
0128
0139
0114
16.78.2
Code
0294
0297
2202
1179
2202
2903
2904
2203
0059
tonne km
Rate
Amount
162.80
814.00
2944.00
404803.62
4048.04
408851.66
61327.75
470179.41
2089.68
2089.70
With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR

Value-25
Description
MATERIAL
per Grading-I of specifications
26.5mm to 9.5mm @ 35% = 100.80 cum
9.5 mm to 2.36mm @ 25% = 72 cum
2.36mm below @ 40% = 115.20 cum
nominal size
nominal size
nominal size
nominal size
nominal size
nominal size
@75 tonne capacity
1049
Unit
Quantity
Rate
Amount
cum
50.40
1250.00
63000.00
cum
50.40
1300.00
65520.00
cum
cum
100.80
72.00
103.77
900.00
10459.89
64800.00
cum
72.00
103.77
7471.35
cum
57.60
1150.00
66240.00
cum
cum
57.60
115.20
1150.00
103.77
66240.00
11954.15
hour
6.00
750.00
4500.00
Code
Description
Unit
Quantity
0070
0057

(incl POL)
Km) =450x10 =4500 t.Km
Tipper -5 Cum
LABOUR
Mate
Beldar
Total
Total
Cost per cum.
Say
hour
hour
6.00
4.50
300.00
200.00
1800.00
900.00
hour
6.00
800.00
4800.00
4500.00
3.00
13500.00
hour
hour
6.00
6.00
2100.00
650.00
1350.00
12600.00
3900.00
day
day
day
0.40
2.00
8.00
407.00
407.00
368.00
0052
0053
0050
0054
0128
0139
0114
16.78.3
Code
1179
2202
1179
2202
2903
2904
2203
0059
0070
0057
tonne km
Rate
Amount
162.80
814.00
2944.00
402956.19
4029.56
406985.75
61047.86
468033.61
2080.14
2080.15
With material conforming to Grade-III (size range 26.5 mm to 0.075 mm ) having CBR
Value-20
Description
MATERIAL
per Grading-III of specifications
9.5mm to 4.75mm @ 35% = 100.80 cum
4.75 mm to 2.36mm @ 12.5% = 36.00 cum
2.36mm below @ 52.5% = 151.20 cum
nominal size
nominal size
nominal size
nominal size
@75 tonne capacity
1050
Unit
Quantity
Rate
Amount
cum
100.80
900.00
90720.00
cum
cum
100.80
36.00
103.77
900.00
10459.89
32400.00
cum
36.00
103.77
3735.67
cum
75.60
1150.00
86940.00
cum
cum
75.60
151.20
1150.00
103.77
86940.00
15689.83
hour
6.00
750.00
4500.00
hour
hour
6.00
4.50
300.00
200.00
1800.00
900.00
Code
Description
0052

(incl POL)
Km) =450x10 =4500 t.Km
Tipper -5 Cum
LABOUR
Mate
Beldar
Total
Total
Cost per cum.
Say
0053
0050
0054
0128
0139
0114
16.79
Code
0292
0293
0294
0295
Unit
Quantity
hour
6.00
800.00
4800.00
4500.00
3.00
13500.00
hour
hour
6.00
6.00
2100.00
650.00
1350.00
12600.00
3900.00
day
day
day
0.40
2.00
8.00
407.00
407.00
368.00
tonne km
Rate
Amount
162.80
814.00
2944.00
374156.19
3741.56
377897.75
56684.66
434582.41
1931.47
1931.45
Providing, laying, spreading and compacting graded stone aggregate (size range 53
mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the
material with water at OMC in for all leads & lifts, laying in uniform layers with
mechanical paverfinisher in sub- base / base course on well prepared surface and
compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density,
complete as per specifications and directions of Engineer-in-Charge.
Description
Details of cost for 225 cum (495 tonne)
MATERIAL
Conforming to table
45mm to22.4mm @ 30% = 89.10 cum
Qty for 0292,0293,0294,0295 codes =
89.10 / 4 = 22.275 cum
Qty for 2206, 2202 codes = 89.10 /2 = 4
4.55 cum
22.4 mm to 2.36mm @ 40% = 118.80 cum
Qty for 0294,0295 codes = 118.80 /4
= 29.70 cum
Qty for 1179 code = 118.80 /2 = 59.40 cum
2.36 mm to 75 microon @ 30% = 89.10 cum
Qty for 2903, 2904 codes = 89.10 / 2
= 44.55 cum
nominal size
nominal size
nominal size
nominal size
1051
Unit
Quantity
Rate
Amount
cum
22.275
1150.00
25616.25
cum
22.275
1250.00
27843.75
cum
22.275
1250.00
27843.75
cum
22.275
1300.00
28957.50
Code
Description
2206

nominal size
nominal size
nominal size
nominal size
nominal size
nominal size
@75 tonne capacity
(incl POL)
Km) =450x10 =4500 t.Km
Tipper -5 Cum
Paver finisher Mechanical 100 TPH
LABOUR
Mate
Beldar
Total
Total
Cost per cum.
Say
2202
0294
0295
1179
2202
2903
2904
2203
0059
0070
0057
0052
0053
0065
0054
0128
0139
0114
16.80
Unit
Quantity
cum
44.55
112.79
5024.89
cum
44.55
103.77
4622.90
cum
29.70
1250.00
37125.00
cum
cum
29.70
59.40
1300.00
900.00
38610.00
53460.00
cum
118.80
103.77
12327.72
cum
44.55
1150.00
51232.50
cum
cum
44.55
89.10
1150.00
103.77
51232.50
9245.79
hour
6.60
750.00
4950.00
hour
hour
6.00
3.00
300.00
200.00
1800.00
600.00
hour
6.00
800.00
4800.00
4950.00
3.00
14850.00
hour
hour
6.00
3.90
700.00
650.00
1485.00
4200.00
2535.00
day
day
day
0.48
2.00
10.00
407.00
407.00
368.00
tonne km
Rate
Amount
195.36
814.00
3680.00
413051.91
4130.52
417182.43
62577.36
479759.79
2132.26
2132.25
Construction of dry lean cement concrete sub base over a prepared sub-grade with
coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not
exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation
after blending to be as per specifications, cement content not to be less than 150 Kg/
cum, optimum moisture content to be determined during trial length construction,
concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant,
transported to site, for all leads & lifts, laid with a mechanical paver, compacting with
1052
8-10 tonne vibratory roller, finishing and curing etc. complete as per direction of
Engineer-in- charge.
Code
0294
0296
0982
0367
2202
2203
2209
0052
0066
0069
0065
0054
0057
0053
0128
0139
0114
Description
Details of cost for 450 cum (990 tonne)
MATERIAL
Crushed stone coarse aggregate of 25mm
& 12.5 mm nominal sizes graded as per
specifications @ 0.90 cum/cum of concrete
conforming to specification. = 405 cum
Coarse Sand @0.45 m3 per cum of
concrete = 203 cum
Cement @150 Kg. per cum of concrete
= 67.50 cum
Qty for 0294,0296 codes = 405 / 2 =
202.50 cum
nominal size
nominal size
nominal size
Carriage of Cement
(incl POL)
@75 tonne capacity
Batching and Mixing Plant @ 75 cum
per hour
Generator 250 KVA
Paver finisher Mechanical 100 TPH
Tipper -5 Cum
LABOUR
Mate
Beldar
Total
Total
Cost per cum.
Say
1053
Unit
Quantity
Rate
Amount
cum
202.50
1250.00
253125.00
cum
cum
tonne
202.50
203.00
67.50
1300.00
1200.00
5700.00
263250.00
243600.00
384750.00
cum
cum
tonne
405.00
203.00
67.50
103.77
103.77
92.24
42026.32
21065.05
6226.12
hour
6.00
800.00
4800.00
hour
hour
6.00
6.00
2500.00
400.00
15000.00
2400.00
6.00
8.00
8.00
9900.00
700.00
650.00
200.00
3.00
4200.00
5200.00
1600.00
29700.00
hour
hour
hour
tonne km
2970.00
day
day
day
1.12
6.00
22.00
407.00
407.00
368.00
455.84
2442.00
8096.00
1290906.33
12909.06
1303815.39
195572.31
1499387.70
3331.97
3331.95
16.81
Code
16.81X
16.81Y
13.50.3
13.61.1
16.81X
Code
1013
Providing and erecting 2.00 metre high temporary barricading at site as per drawing/
direction of Engineer-in-Charge which includes writing and painting, arrangement
for traffic diversion such as traffic signals during construction at site for day and
night, glow lamps, reflective signs, marking, flags, caution tape as directed by the
Engineer-in-Charge. The barricading provided shall be retained in position at site
continuously i/c shifting of barricading from one location to another location as many
times as required during the execution of the entire work till its completion. Rate
include its maintenance for damages, painting, all incidentals, labour materials,
equipments and works required to execute the job. The barricading shall not be
removed without prior approval of Engineer-in-Charge.(Note :- One time payment
shall be made for providing barricading from start of work till completion of work i/c
shifting. The barricading provided shall remain to be the property of the contractor
on completion of the work).
Description
Details of cost for 2.5 metre
MATERIAL
Rate as per Sub Analysis No.16.81X
Rate as per Sub Analysis No.16.81Y
SH: FINISHING
SH: FINISHING
TOTAL
i.e. on (3558.88 - 1182.50) = 2376.38
TOTAL
= 2400.14
Cost of 2.5 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
metre
metre
2.50
2.50
33.40
917.15
83.50
2292.88
sqm
11.00
29.10
320.10(A)
sqm
11.00
78.40
862.40(A)
3558.88
23.76
3582.64
360.02
3942.66
1577.06
1577.05
Sub analysis item for material component of Item No. 16.81

Description
Sub analysis item no.16.81X to be used in
Item No. 16.81
Details of cost for 2.5 meter
MATERIAL
M.S. Sheet 1.63mm thick = 1x2.50x2.00
= 5.00 sqm @ 12.80 kg/sqm = 64.00 kg
wastage @ 5%= 3.20 kg
Total = 67.20 kg
Mild steel sheets for tanks
MS Angle - 40 x 40 x 6 mm
Outframe=2x(2.50+2.00)=9.00 m
Vertical extra = 2x0.300 = 0.60 m
Horizontal = 1x2.50 =2.50 m
Bracing = 1x3.20 = 3.20 m
1054
Unit
Quantity
quintal
0.672
Rate
3775.00
Amount
2536.80
Code
1007
1007
1008
2205
16.81Y
Code
1215
0102
0103
0100
0114
9999
0116
0103
0100
0114
0139
Description
Bracing at bottom = 2x0.50 = 1.00 m
Total = 16.30 m @ 3.50 kg/m = 57.05 kg +
wastage @ 5% = 2.85 kg
Total = 59.90 kg
and R.S. joists
M.S. Channel = 2x0.50 =1.00 m @
5.70 kg/m = 5.70 kg+
Total = 5.99 kg
Structurals such as tees, angles channels
and R.S. joists
M.S. Flat 30x5 mm
Horizontal = 3x2.50 = 7.50 m
Vertical = 2x2.00 = 4.00 m
Total = 11.50 m @ 1.20 kg/m = 13.80 kg +
Total = 14.49 kg
Carriage of Steel
TOTAL
Add for maintenance @ 10% on
Less for salvage value of material @ 50% on
TOTAL
Assuming that material will become
unserviceable after using 40 times, cost of
2.5 metre using once = S/40
Cost of 2.5 meter
Cost of 1 meter
Say
Unit
Quantity
Rate
Amount
quintal
0.599
3775.00
2261.23
quintal
0.0599
3775.00
226.12
quintal
tonne
0.1449
0.148
3675.00
92.24
532.51
13.65
5570.31
557.03
-2785.16
3342.18
83.55
33.42
33.40
Sub analysis item for fabrication charges of Item No. 16.81

Description
Sub analysis item no.16.81Y to be used in
Item No. 16.81
Details of cost for 2.5 metre
MATERIAL
Cutting, assembling and erection charges
LABOUR
Bandhani
Beldar
Sundries
Labour for riveting / bolting / cutting etc.
Fitter (grade 1)
Bandhani
Beldar
1055
Unit
Quantity
Rate
Amount
cm
165.00
2.00
330.00
day
day
day
day
L.S.
0.115
0.115
0.11
0.83
12.10
487.00
448.00
407.00
368.00
1.73
56.01
51.52
44.77
305.44
20.93
day
day
day
day
day
0.41
0.54
0.70
0.54
0.81
487.00
448.00
407.00
368.00
407.00
199.67
241.92
284.90
198.72
329.67
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
Shifting including transportation, re-erection
etc. @ 10%
TOTAL Cost of 2.5 meter
Cost of 1 meter
Say
L.S.
12.10
16.82
Code
0114
0115
9999
16.82
Code
0114
0115
9999
Rate
1.73
Amount
20.93
2084.48
208.45
2292.93
917.17
917.15
Taking out existing kerb stones of all types from footpath/ central verge, including
removal of mortar etc., disposal of unserviceable material to the dumping ground,
for which payment shall be made separately and stacking of serviceable material
within 50 metre lead as per direction of Engineer-in-Charge.
Description
Details of cost for 100 meter
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 100 meter
Cost of 1 meter
Say
Unit
Quantity
day
day
L.S.
0.75
3.00
2.00
Rate
368.00
368.00
1.73
Amount
276.00
1104.00
3.46
1383.46
13.83
1397.29
209.59
1606.88
16.06
16.05
Taking out existing kerb stones of all types from footpath/ central verge, including
removal of mortar etc., disposal of unserviceable material to the dumping ground,
Description
Details of cost for 100 meter
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 100 meter
Cost of 1 meter
Say
1056
Unit
Quantity
day
day
L.S.
0.75
3.00
2.00
Rate
368.00
368.00
1.73
Amount
276.00
1104.00
3.46
1383.46
13.83
1397.29
209.59
1606.88
16.06
16.05
16.83
Code
0114
0115
9999
16.84
Code
0982
2203
0983
2261
0123
0124
0114
0115
Taking out existing CC interlocking paver blocks from footpath/ central verge, including
removal of rubbish etc., disposal of unserviceable material to the dumping ground,
Description
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm
Say
Unit
Quantity
day
day
L.S.
0.25
1.00
2.70
Rate
368.00
368.00
1.73
Amount
92.00
368.00
4.67
464.67
4.65
469.32
70.40
539.72
53.97
53.95
Laying old cement cocrete interlocking paver blocks of any design/ shape laid in
required line, level, curvature, colour and pattern over and including 50 mm thick
compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per
the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the
department free of cost).
Description
MATERIAL
Bedding layer 50mm thick
Qty = 10 x 0.05 = 0.50 cum
Fine sand (zone IV)
LABOUR
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 sqm.
Cost of 1 sqm
Say
1057
Unit
Quantity
Rate
Amount
cum
0.50
1200.00
600.00
cum
cum
0.50
0.15
103.77
760.00
51.88
114.00
cum
0.15
103.77
15.57
day
day
day
day
0.50
0.50
1.00
0.50
487.00
448.00
368.00
368.00
243.50
224.00
368.00
184.00
1800.95
18.01
1818.96
272.84
2091.80
209.18
209.20
16.85
Code
3.8
0123
0124
0114
0115
Laying at or near ground level old kerb stones of all types in position to the required
line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand),
including making joints with or without grooves (thickness of joints, except at sharp
curve, shall not be more than 5 mm), including making drainage opening wherever
required etc. complete as per direction of Engineer-in-charge. (Length of finished
kerb edging shall be measured for payment). (Old kerb stones shall be supplied by
the department free of cost)
Description
Details of cost for 100 meter.
MATERIAL
Number of kerb stones = 100 / 0.405
= 247 Nos.
Qty. = 247 x 0.40 x 0.375 x 0.20 = 7.41cum
No. of joints = 247 - 1 = 246 Nos.
Cement Mortar 1:3 for fixing joints = 246 x
[(0.115 + 0.20)/2 x 0.375 x 0.005]
= 0.073 cum
Rate as per Item No.3.8 of SH:MORTARS
LABOUR
Beldar
Coolie
TOTAL
TOTAL
Cost of 100 meter.
Cost of 1 meter.
Say
Unit
Quantity
Rate
Amount
cum
0.073
4723.50
344.82
day
day
day
day
2.50
2.50
2.50
1.65
487.00
448.00
368.00
368.00
1217.50
1120.00
920.00
607.20
4209.52
42.10
4251.62
637.74
4889.36
48.89
48.90
16.86
Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and
pre polished machine cut granite stone of required size and shape of approved shade,
colour and texture in footpath, flooring cut granite stone of required size and shape
of approved shade, colour and texture in footpath, flooring in road side plazas and
similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse
sand) including grouting the joints with white cement mixed with matching pigment,
epoxy touch ups etc. complete as per direction of Engineer-in-Charge.
16.86.1
With granite stone of area less than 0.50 sqm.
Code
7295
3.9
Description
Unit
Quantity
Detail of cost for 0.5sqm.

Mirror polished granite 0.5 sqm.
Waste @5% = 0.025 +0.5 = 0.525 sqm.
Granite of any colour, 18 mm thick
(slab area upto 0.50 sqm)
Rate as per Item No.3.9 of SH: MORTARS
sqm
cum
0.525
0.012
1058
Rate
1750.00
3970.50
Amount
918.75
47.65
Code
0123
0114
0115
9999
Description
LABOUR :
Beldar
Coolie
Sundries
TOTAL
TOTAL
Rate per sqm.
Say
Unit
Quantity
day
day
day
L.S.
0.56
0.05
0.05
17.60
Rate
487.00
368.00
368.00
1.73
Amount
272.72
18.40
18.40
30.45
1306.37
13.06
1319.43
197.91
3034.68
3034.70
16.87
Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and
pre polished machine cut granite stone of required size and shape of approved shade,
colour and texture in footpath, flooring in road side plazas and similar locations, laid
over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including
grouting the joints with white cement mixed with matching pigment, epoxy touch
ups etc. complete as per direction of Engineer-in-Charge.
16.87.1
With granite stone of area less than 0.50 sqm.
Code
7296
3.9
0123
0114
0115
9999
16.88
Code
Description
Detail of cost for 0.50 sqm.
MATERIAL
Mirror polished granite 0.50 sqm.
Waste @5% total = 0.025 +0.50
= 0.525 sqm.
Granite stone slab 30mm thick
LABOUR :
Beldar
Coolie
Sundries
TOTAL
TOTAL
Rate per sqm.
Say
Unit
Quantity
Rate
Amount
sqm
cum
0.525
0.012
2000.00
3970.50
1050.00
47.65
day
day
day
L.S.
0.56
0.05
0.05
17.60
487.00
368.00
368.00
1.73
272.72
18.40
18.40
30.45
1437.62
14.38
1452.00
217.80
3339.60
3339.60
Providing and laying matt finished vitrified tile of size 100x100x16mm having water
absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours
and shades in out door floors such as footpath, court yard multi models etc., laid on
20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes &
patterns including grouting the joints with white cement mixed with matching pigments
etc. complete as direction of Engineer-in-Charge.
Description
Unit

MATERIAL
Matt finished vitrified tile 100x100 x16mm
=10sqm.
1059
Quantity
Rate
Amount
Code
Description
7895
9977
3.9
9999
0367
Matt finished vitrified tile 100x100 x16mm

Sundries
Sundries
LABOUR :
Coolie
Sundries
TOTAL
TOTAL
Cost per sqm.
Say
0123
0115
9999
16.89
Code
7896
9977
3.9
9999
0367
0123
0115
9999
16.90
Unit
Quantity
Rate
Amount
sqm
L.S.
cum
L.S.
tonne
1.00
6.24
0.024
3.64
0.0033
377.00
1.73
3970.50
1.73
5700.00
377.00
10.80
95.29
6.30
18.81
day
day
L.S.
0.20
0.20
26.91
487.00
368.00
1.73
97.40
73.60
46.55
725.75
7.26
733.01
109.95
842.96
842.95
Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with
water absorption less than 0.5% and conforming to IS: 15622 of approved make in all
colours and shades in for outdoor floors such as footpath, court yard, multi modals
location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse
sand) in all shapes & patterns including grouting the joints with white cement mixed
with matching pigments etc. complete as per direction of Engineer-in-Charge.
Description
Unit

MATERIAL
Tile 300x300 x9.8mm = 1.00 sqm.
Vitrified tile
Sundries
Sundries
LABOUR :
Coolie
Sundries
TOTAL
TOTAL
Rate per sqm.
Say
Quantity
Rate
Amount
sqm
L.S.
cum
L.S.
tonne
1.00
6.24
0.024
3.64
0.0033
309.00
1.73
3970.50
1.73
5700.00
309.00
10.80
95.29
6.30
18.81
day
day
L.S.
0.20
0.20
26.91
487.00
368.00
1.73
97.40
73.60
46.55
657.75
6.58
664.33
99.65
763.98
764.00
Providing and laying tactile tile (for vision impaired persons as per standards) of size
300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:
15622 of approved make in all colours and shades in for outdoor floors such as
footpath, court yard, multi modals location etc., laid on 20mm thick base of cement
mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the
1060
joints with white cement mixed with matching pigments etc. complete as per direction
of Engineer-in-Charge.
Code
7893
9977
3.9
9999
0367
0123
0115
9999
Description
Unit

MATERIAL:
Tile 300x300 x9.8mm = 1.00 sqm.
Tactile tile
Carriage
Sundries
LABOUR :
Coolie
Sundries
TOTAL
TOTAL
Cosr per sqm
Say
Quantity
Rate
Amount
sqm
L.S.
cum
L.S.
tonne
1.00
6.24
0.024
3.64
0.0033
900.00
1.73
3970.50
1.73
5700.00
900.00
10.80
95.29
6.30
18.81
day
day
L.S.
0.20
0.20
26.91
487.00
368.00
1.73
97.40
73.60
46.55
1248.75
12.49
1261.24
189.19
1450.43
1450.45
16.91
Providing and laying factory made chamfered edge Cement Concrete paver blocks
in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,
thickness & size/ shape, made by table vibratory method using PU mould, laid in
required colour & pattern over 50mm thick compacted bed of sand, compacting and
proper embedding/laying of inter locking paver blocks into the sand bedding layer
through vibratory compaction by using plate vibrator, filling the joints with sand and
cutting of paver blocks as per required size and pattern, finishing and sweeping
extra sand. complete all as per direction of Engineer-in-Charge.
16.91.1
60mm thick cement concrete paver block of M-35 grade with approved colour, design
& pattern.
Code
7773
0983
2261
0123
0124
0114
0115
9999
Description
MATERIAL :
Coloured inter locking C.C. paver Block
Fine sand (zone IV)
LABOUR
Beldar
Coolie
Sundries
TOTAL
TOTAL
Cost of 10 Cum.
Cost of 1 Cum.
Say
1061
Unit
Quantity
Rate
Amount
sqm
cum
10.00
0.50
500.00
760.00
5000.00
380.00
cum
0.65
103.77
67.45
day
day
day
day
L.S.
0.50
0.50
1.00
0.50
25.00
487.00
448.00
368.00
368.00
1.73
243.50
224.00
368.00
184.00
43.25
6510.20
65.10
6575.30
986.30
7561.60
756.16
756.15
16.91.2
Code
8785
0982
2203
0983
2261
0123
0124
0114
0115
16.92
Code
7774
3.9
0367
0124
0114
0115
0101
13.33.1
80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
Description
MATERIALS :
Interlocking C.C. paver block (80 mm thick,
M-30)
Coarse sand (zone 111) (10 x 0.050 =
0.50 cum )
Fine sand (zone IV)
Carriage of Fine sand
Labour for Laying
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 Cum.
Cost of 1 Cum.
Say
Unit
Quantity
Rate
Amount
sqm
10.00
370.00
3700.00
cum
cum
cum
cum
0.50
0.50
0.15
0.15
1200.00
103.77
760.00
103.77
600.00
51.88
114.00
15.57
day
day
day
day
0.50
0.50
1.00
0.50
487.00
448.00
368.00
368.00
243.50
224.00
368.00
184.00
5500.95
55.01
5555.96
833.39
6389.35
638.93
638.95
Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed
on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement
: 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing
etc. complete as per direction of engineer-in-charge.
Description
Unit

MATERIALS :
Stone size 10x10x7.50cm =1sqm+5%
wastage=sqm
Stone size 10x10x7.50cm
LABOUR :
Beldar
Coolie
Bhisti
SH: FINISHING
TOTAL
i.e. on (12246.59 - 1684.50) = 10562.09
TOTAL
- 1684.50) = 10667.71
Cost of 10 sqm.
Cost of 1 sqm.
Say
1062
Quantity
Rate
827.00
0.434
0.02
9.00
3970.50
5700.00
7443.00
1723.20
114.00
day
day
day
day
1.08
0.25
1.62
0.27
448.00
368.00
368.00
407.00
483.84
92.00
596.16
109.89
sqm
10.00
each
cum
tonne
Amount
168.45 1684.50(A)
12246.59
105.62
12352.21
1600.16
13952.37
1395.23
1395.25
16.93
Code
5.33.1
5.22.6
10.22
1013
13.61.1
13.18
16.94
Providing and placing in position 100 mm thick factory made machine batched &
machine mixed Precast RCC Rectangular Covers on drains of footpath of various
sizes, of M-25 grade cement concrete for RCC work, including cost of centering,
shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm
c/c on both ways , neat cement punning on finished surface, properly encased on all
edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat ,
reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia
bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as
Description
Details of cost of 1 No of size 1.50 x
0.40 = 0.60 sqm
MATERIALS :
Precast RCC M-25
SH: REINFORCED CEMENT CONCRETE
Reinforcement TMT
SH: REINFORCED CEMENT CONCRETE
Welding by gas plant/ Electric plant
SH: STEEL WORK
M.S. sheet 1.60 mm thick
2x(1.50+0.40)x0.10x0.016x7850=4.77kg
Mild steel sheets for tanks
Paint 2x(1.50+0.40)x0.10=0.38sqm
SH: FINISHING
Neat Cement Punning
1x1.50x0.40=0.60 sqm
SH: FINISHING
TOTAL
i.e. on (1115.70 - 935.63) = 180.07
TOTAL
- 935.63) = 181.87
Cost of 0.60 sqm.
Cost of 1 sqm.
Say
Unit
Quantity
Rate
Amount
cum
0.06
6446.45
386.79(A)
Kg
4.59
56.60
259.79(A)
cm
82.00
2.85
233.70(A)
quintal
0.0477
3775.00
180.07
sqm
0.38
78.40
29.79(A)
sqm
0.60
42.60
25.56(A)
1115.70
1.80
1117.50
27.28
1144.78
1907.96
1907.95
Providing & making Gabion structure with Mechanically Woven Double Twisted
Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause
2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of 2%) Zinc coated,
Mesh wire diameter 3.0 mm, mechanically edged/selvedged with partitions at every
1m interval and shall have minimum 10 numbers of openings per meter of mesh
perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @3% by
1063
weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per
drawing, all complete as per direction of Engineer-in-charge.
Code
8576
7753
0128
0125
0114
16.95
Code
8577
7753
0128
0125
0114
Description
Details cost of one Gabion box/Crates of
size 2mx1mx1m = 2 cum
MATERIAL
Crates made of Mesh type 10x12
(D=100 mm) Zn coated. (Mesh wire
diameter 3.00 mm).
Surface area required = 11.00 sqm.
Stone boulder with least dimension 200mm
LABOUR
Mate
Mason (for plain stone work) 2nd class
Beldar
TOTAL
TOTAL
Cost of 2 cum
Cost of 1 cum
Say
Unit
Quantity
Rate
Amount
sqm
11.00
190.00
2090.00
cum
2.00
700.00
1400.00
day
day
day
0.10
0.50
1.50
407.00
448.00
368.00
40.70
224.00
552.00
4306.70
43.07
4349.77
652.47
5002.24
2501.12
2501.10
2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of 2%) Zinic+PVC
coated, Mesh wire diameter2.7/3.7mm, mechanically edged/selvedged with partitions
at every 1m interval and shall have minimum 10 numbers of openings per meter of
mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD),
supplied @3% by weight of Gabion boxes, filled with boulders with least dimension
of 200 mm, as per drawing, all complete as per directions of Engineer-in-charge.
Description
MATERIAL
Crates made of Mesh type 10x12 (D=100
mm) Zn+PVC coated. Mesh wire diameter
2.70/3.70 mm (ID/OD).
LABOUR
Mate
Beldar
TOTAL
TOTAL
Cost of 2 cum
Cost of 1 cum
Say
1064
Unit
Quantity
Rate
Amount
sqm
11.00
220.00
2420.00
cum
2.00
700.00
1400.00
day
day
day
0.10
0.50
1.50
407.00
448.00
368.00
40.70
224.00
552.00
4636.70
46.37
4683.07
702.46
5385.53
2692.76
2692.75
16.96
Code
8578
7753
0128
0125
0114
2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of 2%), Zinic+10%
Al alloy+PVC coated, Mesh wire diameter 2.7/3.7mm (ID/OD), mechanically edged/
selvedged with partitions at every 1m interval and shall have minimum 10 numbers
of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter
2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders
with least dimension of 200 mm, as per drawing, all complete as per directions of
Engineer-in-charge.
Description
MATERIAL
Crates made of Mesh type 10x12 (D=100
mm) Zn+10% Al alloy + PVC coated. Mesh
wire diameter 2.70/3.70 mm (ID/OD).
LABOUR
Mate
Beldar
TOTAL
TOTAL
Cost of 2 cum
Cost of 1 cum
Say
1065
Unit
Quantity
Rate
Amount
sqm
11.00
290.00
3190.00
cum
2.00
700.00
1400.00
day
day
day
0.10
0.50
1.50
407.00
448.00
368.00
40.70
224.00
552.00
5406.70
54.07
5460.77
819.12
6279.89
3139.94
3139.95
SUB HEAD : 17.0
SANITARY INSTALLATIONS
1067
17.1
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with
100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, with manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and fixtures complete, including cutting
and making good the walls and floors wherever required:
17.1.1
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral
type foot rests
Code
1954
7358
1896
9999
9977
0116
0123
0114
17.1.2
Code
7805
7358
1896
9999
9977
0116
0123
0114
Description
Details of cost for one pan
MATERIAL
Vitreous china orrisa type w.c. pan size
580 mm
Flushing Cistern P.V.C. 10 lts capacity (low
level) (White) (with fittings, accessories and
flush pipe)
100 mm S.C.I. trap with vent heel
Cement, sand and grit etc.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
1.00
780.00
780.00
each
each
L.S.
L.S.
1.00
1.00
26.91
26.91
600.00
315.00
1.73
1.73
600.00
315.00
46.55
46.55
day
day
day
1.25
0.50
1.00
487.00
487.00
368.00
608.75
243.50
368.00
3008.35
30.08
3038.43
455.76
3494.19
3494.20
Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm

with flush pipe and integrated type foot rests
Description
MATERIAL
Salem Stainless steel AISI - 304 (18/8)
Orrisa pattern W.C. pan 724mm X 578mm
flush pipe)
100 mm S.C.I. trap with vent heel
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
SUB HEAD : 17- SANITARY INSTALLATIONS
1069
Unit
Quantity
Rate
Amount
each
1.00
3600.00
3600.00
each
each
L.S.
L.S.
1.00
1.00
26.91
26.91
600.00
315.00
1.73
1.73
600.00
315.00
46.55
46.55
day
day
day
1.25
0.50
1.00
487.00
487.00
368.00
608.75
243.50
368.00
5828.35
58.28
5886.63
882.99
6769.62
6769.60
17.2
Providing and fixing white vitreous china pedestal type water closet (European
type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,
including flush pipe, with manually controlled device (handle lever), conforming
to IS : 7231, with all fittings and fixtures complete, including cutting and making
good the walls and floors wherever required :
17.2.1
W.C. pan with ISI marked white solid plastic seat and lid
Code
1875
1955
7358
9999
9977
0116
0123
0114
17.2.2
Code
1876
1955
7358
9999
9977
0116
0123
0114
Description
MATERIAL
White plastic seat (solid)with lid C.P.brass
hinges and rubber buffers
Vitreous china pedestal type water closet
flush pipe)
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
each
1.00
1.00
330.00
700.00
330.00
700.00
each
L.S.
L.S.
1.00
26.91
26.91
600.00
1.73
1.73
600.00
46.55
46.55
day
day
day
1.25
0.50
1.00
487.00
487.00
368.00
608.75
243.50
368.00
2943.35
29.43
2972.78
445.92
3418.70
3418.70
W.C. pan with ISI marked black solid plastic seat and lid
Description
MATERIAL
Black plastic seat (solid) with lid C.P.brass
flush pipe)
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1070
Unit
Quantity
Rate
Amount
each
each
1.00
1.00
310.00
700.00
310.00
700.00
each
L.S.
L.S.
1.00
26.91
26.91
600.00
1.73
1.73
600.00
46.55
46.55
day
day
day
1.25
0.50
1.00
487.00
487.00
368.00
608.75
243.50
368.00
2923.35
29.23
2952.58
442.89
3395.47
3395.45
17.3
Providing and fixing white vitreous china pedestal type water closet (European
type) with seat and lid, 10 litre low level white vitreous china flushing cistern
& C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow
arrangement with specials of standard make and mosquito proof coupling of
approved municipal design complete, including painting of fittings and
brackets, cutting and making good the walls and floors wherever required :
17.3.1
W.C. pan with ISI marked white solid plastic seat and lid
Code
1875
1955
7006
9999
1350
9999
9999
9999
9977
0116
0123
0114
17.3.2
Code
1876
1955
7006
9999
1350
9999
9999
9999
9977
Description
MATERIAL
Vitreous china 10 litres low level cistern
with fittings
Overflow arrangement and specials for
oveflow pipe
Mosquito proof coupling of approved design
Plugs ,screws etc.
Red lead, white lead and gaskit
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
each
1.00
1.00
330.00
700.00
330.00
700.00
each
1.00
1300.00
1300.00
L.S.
each
L.S.
L.S.
L.S.
L.S.
62.79
1.00
13.52
16.12
26.91
26.91
1.73
30.00
1.73
1.73
1.73
1.73
108.63
30.00
23.39
27.89
46.55
46.55
day
day
day
1.00
1.00
1.00
487.00
487.00
368.00
487.00
487.00
368.00
3955.01
39.55
3994.56
599.18
4593.74
4593.75
W.C. pan with ISI marked black solid plastic seat and lid
Description
MATERIAL
with fittings
Overflow arrangement and specials for
oveflow pipe
Plugs, screws etc.
1071
Unit
Quantity
Rate
Amount
each
each
1.00
1.00
310.00
700.00
310.00
700.00
each
1.00
1300.00
1300.00
L.S.
each
L.S.
L.S.
L.S.
L.S.
62.79
1.00
13.52
16.12
26.91
26.91
1.73
30.00
1.73
1.73
1.73
1.73
108.63
30.00
23.39
27.89
46.55
46.55
Code
0116
0123
0114
Description
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
day
day
day
1.00
1.00
1.00
Rate
487.00
487.00
368.00
Amount
487.00
487.00
368.00
3935.01
39.35
3974.36
596.15
4570.51
4570.50
17.4
Providing and fixing white vitreous china flat back or wall corner type lipped
front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively
with automatic flushing cistern with standard flush pipe and C.P. brass
spreaders with brass unions and G.I clamps complete, including painting of
fittings and brackets, cutting and making good the walls and floors wherever
required :
17.4.1
One urinal basin with 5 litre white P.V.C. automatic flushing cistern
Code
1913
7359
7375
9999
9999
9999
9999
9977
0116
0123
0114
17.4.2
Description
Details of cost for one no.
MATERIAL
Vitreous china lipped front urinal
P.V.C. automatic flushing cistern 5 lts
capacity
G.I. flush pipe and C.P. brass spreader
including C.P. connecting pipe Single lipped
urinal
Plugs ,screws etc.
Painting of fittings etc.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
1.00
460.00
460.00
each
1.00
490.00
490.00
each
L.S.
L.S.
L.S.
L.S.
L.S.
1.00
13.52
13.52
13.52
39.00
26.91
465.00
1.73
1.73
1.73
1.73
1.73
465.00
23.39
23.39
23.39
67.47
46.55
day
day
day
0.88
0.88
1.50
487.00
487.00
368.00
428.56
428.56
552.00
3008.31
30.08
3038.39
455.76
3494.15
3494.15
Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern
Code
Description
Unit
Quantity
1913

MATERIAL
each
2.00
1072
Rate
460.00
Amount
920.00
Code
Description
7359

capacity
including C.P. connecting pipe Range of
two lipped urinals
Plugs ,screws etc.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
7376
9999
9999
9999
9999
9977
0116
0123
0114
17.4.3
Code
1913
7361
7377
9999
9999
9999
9999
9977
0116
0123
0114
Unit
Quantity
Rate
Amount
each
1.00
490.00
490.00
each
L.S.
L.S.
L.S.
L.S.
L.S.
1.00
20.28
20.28
20.28
39.00
26.91
800.00
1.73
1.73
1.73
1.73
1.73
800.00
35.08
35.08
35.08
67.47
46.55
day
day
day
1.50
1.50
2.00
487.00
487.00
368.00
730.50
730.50
736.00
4626.26
46.26
4672.52
700.88
5373.40
5373.40
Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern
Description
MATERIAL
capacity
three lipped urinals
Plugs ,screws etc.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1073
Unit
Quantity
Rate
Amount
each
3.00
460.00
1380.00
each
1.00
530.00
530.00
each
L.S.
L.S.
L.S.
L.S.
L.S.
1.00
33.67
33.67
33.67
39.00
40.30
1100.00
1.73
1.73
1.73
1.73
1.73
1100.00
58.25
58.25
58.25
67.47
69.72
day
day
day
2.00
2.00
3.00
487.00
487.00
368.00
974.00
974.00
1104.00
6373.94
63.74
6437.68
965.65
7403.33
7403.35
17.4.4
Code
1913
7361
7378
9999
9999
9999
9999
9977
0116
0123
0114
Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern
Description
MATERIAL
capacity
four lipped urinals
Plugs ,screws etc.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
4.00
460.00
1840.00
each
1.00
530.00
530.00
each
L.S.
L.S.
L.S.
L.S.
L.S.
1.00
53.82
53.82
53.82
39.00
53.82
1500.00
1.73
1.73
1.73
1.73
1.73
1500.00
93.11
93.11
93.11
67.47
93.11
day
day
day
3.00
3.00
4.00
487.00
487.00
368.00
1461.00
1461.00
1472.00
8703.91
87.04
8790.95
1318.64
10109.59
10109.60
17.5
Providing and fixing white vitreous china flat back half stall urinal of size
580x380x350 mm with white PVC automatic flushing cistern, with fittings,
standard size C.P. brass flush pipe, spreaders with unions and clamps (all in
C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and
other couplings in C.P. brass, including painting of fittings and cutting and
making good the walls and floors wherever required :
17.5.1
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
Code
7379
7359
1532
1891
9999
9999
9999
9977
Description
MATERIAL
White vitreous china clay half stall urinal
flat back 580x380x350 mm or angle back
450x375x350 mm with waste fittings as per
IS : 2556
capacity
Flush pipe with union spreaders and clamps
all in C.P. brass for single stall
C.I. trap for standard urinal with vent arm
with operating and other couplings in
C.P.brass: 50 mm dia
1074
Unit
Quantity
Rate
Amount
each
1.00
907.00
907.00
each
1.00
490.00
490.00
each
1.00
270.00
270.00
each
L.S.
L.S.
L.S.
L.S.
1.00
17.55
26.91
26.00
40.43
170.00
1.73
1.73
1.73
1.73
170.00
30.36
46.55
44.98
69.94
Code
0116
0123
0114
17.5.2
Code
7379
7359
1533
1891
9999
9999
9999
9977
0116
0123
0114
17.5.3
Code
7379
Description
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
day
day
day
1.75
2.00
4.00
Rate
487.00
487.00
368.00
Amount
852.25
974.00
1472.00
5327.08
53.27
5380.35
807.05
6187.40
6187.40
Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern
Description
MATERIAL
IS : 2556
capacity
all in C.P. brass for double stall
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
2.00
907.00
1814.00
each
1.00
490.00
490.00
each
1.00
400.00
400.00
each
L.S.
L.S.
L.S.
L.S.
1.00
17.55
53.82
26.00
53.82
170.00
1.73
1.73
1.73
1.73
170.00
30.36
93.11
44.98
93.11
day
day
day
2.50
3.00
6.00
487.00
487.00
368.00
1217.50
1461.00
2208.00
8022.06
80.22
8102.28
1215.34
9317.62
9317.60
Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern
Description
Unit
Quantity

MATERIAL
IS : 2556
each
3.00
1075
Rate
907.00
Amount
2721.00
Code
Description
7361

capacity
Flush pipe with union spreaders and
clamps all in C.P. brass for range of three
stall
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1534
1893
9999
9999
9999
9977
0116
0123
0114
17.5.4
Code
7379
7361
1535
1893
9999
9999
9999
9977
0116
0123
0114
Unit
Quantity
Rate
Amount
each
1.00
530.00
530.00
each
1.00
520.00
520.00
each
L.S.
L.S.
L.S.
L.S.
1.00
17.55
80.73
26.00
67.21
225.00
1.73
1.73
1.73
1.73
225.00
30.36
139.66
44.98
116.27
day
day
day
3.00
3.50
7.00
487.00
487.00
368.00
1461.00
1704.50
2576.00
10068.77
100.69
10169.46
1525.42
11694.88
11694.90
Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern
Description
MATERIAL
IS : 2556
capacity
all in C.P. brass for range of four stall
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1076
Unit
Quantity
Rate
Amount
each
4.00
907.00
3628.00
each
1.00
530.00
530.00
each
1.00
600.00
600.00
each
L.S.
L.S.
L.S.
L.S.
1.00
17.55
107.64
39.00
80.73
225.00
1.73
1.73
1.73
1.73
225.00
30.36
186.22
67.47
139.66
day
day
day
3.50
4.00
8.00
487.00
487.00
368.00
1704.50
1948.00
2944.00
12003.21
120.03
12123.24
1818.49
13941.73
13941.75
17.6
Providing and fixing one piece construction white vitreous china squatting
plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing
cistern, with fittings, standard size G.I. / PVC flush pipe for back and front
flush with standard spreader pipes with fittings, G.I clamps and C.P. brass
coupling complete, including painting of fittings and cutting and making good
the walls and floors etc. wherever required :
17.6.1
Single squatting plate with 5 litre P.V.C. automatic flushing cistern
Code
1915
7359
1540
9999
9999
9999
9977
0116
0123
0114
17.6.2
Code
1915
7359
1541
9999
9999
9999
9977
0116
0123
0114
Description
MATERIAL
Vitreous china squatting plate urinal
capacity
Flush pipe and spreaders G.I.for single set
of one squatting plate urinal
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
1.00
1053.00
1053.00
each
1.00
490.00
490.00
each
L.S.
L.S.
L.S.
L.S.
1.00
17.55
26.91
26.00
26.91
175.00
1.73
1.73
1.73
1.73
175.00
30.36
46.55
44.98
46.55
day
day
day
1.75
0.75
3.00
487.00
487.00
368.00
852.25
365.25
1104.00
4207.94
42.08
4250.02
637.50
4887.52
4887.50
Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern
Description
MATERIAL
capacity
Flush pipe and spreaders G.I.for range of
two squatting plates urinal
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1077
Unit
Quantity
Rate
Amount
each
2.00
1053.00
2106.00
each
1.00
490.00
490.00
each
L.S.
L.S.
L.S.
L.S.
1.00
17.55
53.82
26.00
33.15
250.00
1.73
1.73
1.73
1.73
250.00
30.36
93.11
44.98
57.35
day
day
day
2.50
1.00
4.00
487.00
487.00
368.00
1217.50
487.00
1472.00
6248.30
62.48
6310.78
946.62
7257.40
7257.40
17.6.3
Code
1915
7361
1542
9999
9999
9999
9977
0116
0123
0114
17.6.4
Code
1915
7361
1543
9999
9999
9999
9977
0116
0123
0114
Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern
Description
MATERIAL
capacity
three squatting plates urinal
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
3.00
1053.00
3159.00
each
1.00
530.00
530.00
each
L.S.
L.S.
L.S.
L.S.
1.00
17.55
80.73
26.00
42.12
300.00
1.73
1.73
1.73
1.73
300.00
30.36
139.66
44.98
72.87
day
day
day
3.00
1.50
5.00
487.00
487.00
368.00
1461.00
730.50
1840.00
8308.37
83.08
8391.45
1258.72
9650.17
9650.15
Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern
Description
MATERIAL
capacity
four squatting plates urinal
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1078
Unit
Quantity
Rate
Amount
each
4.00
1053.00
4212.00
each
1.00
530.00
530.00
each
L.S.
L.S.
L.S.
L.S.
1.00
17.55
107.64
26.00
69.03
390.00
1.73
1.73
1.73
1.73
390.00
30.36
186.22
44.98
119.42
day
day
day
3.50
1.75
5.50
487.00
487.00
368.00
1704.50
852.25
2024.00
10093.73
100.94
10194.67
1529.20
11723.87
11723.85
17.7
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings
and brackets, cutting and making good the walls wherever require:
17.7.1
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.
brass pillar taps
Code
1947
1885
1951
1309
9999
9999
9999
9977
0116
0123
0114
17.7.2
Code
1947
1885
1951
1309
9999
9999
9999
9977
0116
0123
0114
Description
MATERIAL
Vitreous china flat back wash basin
630x450 mm
15 mm C.P.brass tap
C.P. brass waste 32 mm
C.I. bracket for wash basin and sinks
Painting of brackets, fittings etc.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
each
each
pair
L.S.
L.S.
L.S.
L.S.
1.00
2.00
1.00
1.00
16.12
13.39
26.91
13.52
725.00
210.00
80.00
65.00
1.73
1.73
1.73
1.73
725.00
420.00
80.00
65.00
27.89
23.16
46.55
23.39
day
day
day
0.33
0.33
0.67
487.00
487.00
368.00
160.71
160.71
246.56
1978.97
19.79
1998.76
299.81
2298.57
2298.55
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P.
brass pillar tap
Description
MATERIAL
630x450 mm
15 mm C.P.brass tap
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1079
Unit
Quantity
Rate
Amount
each
each
each
pair
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52
725.00
210.00
80.00
65.00
1.73
1.73
1.73
1.73
725.00
210.00
80.00
65.00
27.89
23.16
46.55
23.39
day
day
day
0.30
0.33
0.63
487.00
487.00
368.00
146.10
160.71
231.84
1739.64
17.40
1757.04
263.56
2020.60
2020.60
17.7.3
Code
3229
1885
1951
1309
9999
9999
9999
9977
0116
0123
0114
17.7.4
Code
3229
1885
1951
1309
9999
9999
9999
9977
0116
0123
0114
White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.
brass pillar taps
Description
MATERIAL
550x400 mm
15 mm C.P.brass tap
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
each
each
pair
L.S.
L.S.
L.S.
L.S.
1.00
2.00
1.00
1.00
16.12
13.39
26.91
13.52
550.00
210.00
80.00
65.00
1.73
1.73
1.73
1.73
550.00
420.00
80.00
65.00
27.89
23.16
46.55
23.39
day
day
day
0.33
0.33
0.67
487.00
487.00
368.00
160.71
160.71
246.56
1803.97
18.04
1822.01
273.30
2095.31
2095.30
White Vitreous China Flat back wash basin size 550x 400 mm with single 15
mm C.P. brass pillar tap
Description
MATERIAL
550x400 mm
15 mm C.P.brass tap
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1080
Unit
Quantity
Rate
Amount
each
each
each
pair
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52
550.00
210.00
80.00
65.00
1.73
1.73
1.73
1.73
550.00
210.00
80.00
65.00
27.89
23.16
46.55
23.39
day
day
day
0.30
0.33
0.63
487.00
487.00
368.00
146.10
160.71
231.84
1564.64
15.65
1580.29
237.04
1817.33
1817.35
17.7.5
Code
1949
1885
1951
1309
9999
9999
9999
9977
0116
0123
0114
17.7.6
Code
1950
1885
1951
1309
9999
9999
9999
9977
0116
0123
0114
White Vitreous China Angle back wash basin size 600 x 480 mm with single 15
Description
MATERIAL
Vitreous china angle back wash basin
600x480 mm
15 mm C.P.brass tap
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
each
each
pair
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52
725.00
210.00
80.00
65.00
1.73
1.73
1.73
1.73
725.00
210.00
80.00
65.00
27.89
23.16
46.55
23.39
day
day
day
0.30
0.33
0.63
487.00
487.00
368.00
146.10
160.71
231.84
1739.64
17.40
1757.04
263.56
2020.60
2020.60
White Vitreous China Angle back wash basin size 400 x 400 mm with single 15
Description
MATERIAL
400x400 mm
15 mm C.P.brass tap
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1081
Unit
Quantity
Rate
Amount
each
each
each
pair
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52
425.00
210.00
80.00
65.00
1.73
1.73
1.73
1.73
425.00
210.00
80.00
65.00
27.89
23.16
46.55
23.39
day
day
day
0.30
0.33
0.63
487.00
487.00
368.00
146.10
160.71
231.84
1439.64
14.40
1454.04
218.11
1672.15
1672.15
17.7.7
Code
7004
1885
1951
1309
9999
9999
9999
9977
0116
0123
0114
17.7.8
Code
3213
7363
1951
1309
9999
9999
9999
9977
0116
0123
0114
White Vitreous China Flat back wash basin size 450x 300 mm with single 15
Description
MATERIAL
450x300 mm
15 mm C.P.brass tap
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
each
each
pair
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52
325.00
210.00
80.00
65.00
1.73
1.73
1.73
1.73
325.00
210.00
80.00
65.00
27.89
23.16
46.55
23.39
day
day
day
0.30
0.33
0.63
487.00
487.00
368.00
146.10
160.71
231.84
1339.64
13.40
1353.04
202.96
1556.00
1556.00
White Vitreous China Surgeon type wash basin of size 660x460 mm with a
pair of 15 mm C.P. brass pillar taps with elbow including operated levers
Description
MATERIAL
Vitreous china Surgeon type wash basin of
size 660x460 mm
15 mm C.P. brass tap with elbow operation
lever
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1082
Unit
Quantity
Rate
Amount
each
1.00
1000.00
1000.00
each
each
pair
L.S.
L.S.
L.S.
L.S.
2.00
1.00
1.00
16.12
13.39
26.91
13.52
450.00
80.00
65.00
1.73
1.73
1.73
1.73
900.00
80.00
65.00
27.89
23.16
46.55
23.39
day
day
day
0.33
0.33
0.67
487.00
487.00
368.00
160.71
160.71
246.56
2733.97
27.34
2761.31
414.20
3175.51
3175.50
17.7.9
Code
3213
7363
1951
1309
9999
9999
9999
9977
0116
0123
0114
17.7.10
Code
7806
1885
1951
1309
9999
9999
9999
9977
0116
0123
0114
White Vitreous China Surgeon type wash basin of size 660x460 mm with single
15 mm C.P. brass pillar taps with elbow operated levers ISI Marked
Description
MATERIAL
size 660x460 mm
15 mm C.P. brass tap with elbow operation
lever
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
1.00
1000.00
1000.00
each
each
pair
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
16.12
13.39
26.91
13.52
450.00
80.00
65.00
1.73
1.73
1.73
1.73
450.00
80.00
65.00
27.89
23.16
46.55
23.39
day
day
day
0.30
0.33
0.63
487.00
487.00
368.00
146.10
160.71
231.84
2254.64
22.55
2277.19
341.58
2618.77
2618.75
Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm

C.P. brass pillar tap
Description
MATERIAL
Round basin 405mm X 355mm
15 mm C.P.brass tap
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1083
Unit
Quantity
Rate
Amount
each
each
each
pair
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52
1500.00
210.00
80.00
65.00
1.73
1.73
1.73
1.73
1500.00
210.00
80.00
65.00
27.89
23.16
46.55
23.39
day
day
day
0.30
0.33
0.63
487.00
487.00
368.00
146.10
160.71
231.84
2514.64
25.15
2539.79
380.97
2920.76
2920.75
17.7.11
Code
7807
1885
1951
1309
9999
9999
9999
9977
0116
0123
0114
17.7A
Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P.

brass pillar tap
Description
MATERIAL
Wash basin 530mm X 345mm
15 mm C.P.brass tap
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
each
each
pair
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52
1500.00
210.00
80.00
65.00
1.73
1.73
1.73
1.73
1500.00
210.00
80.00
65.00
27.89
23.16
46.55
23.39
day
day
day
0.30
0.33
0.63
487.00
487.00
368.00
146.10
160.71
231.84
2514.64
25.15
2539.79
380.97
2920.76
2920.75
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single
hole basin mixer of approved quality and make, including painting of fittings
and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass
single hole basin mixer
Code
3229
9007
1951
1309
9999
9999
9999
9977
0116
0123
Description
MATERIAL
550x400 mm
C.P. Brass Centre Hole Basin Mixer With
Cast Spout ( Kigston/Marc/Prima/ Parko/
Hindware)
Cement, Sand and grit etc.
LABOUR
Fitter (grade 1)
1084
Unit
Quantity
Rate
Amount
each
1.00
550.00
550.00
each
each
pair
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
16.12
13.39
26.91
13.52
1200.00
80.00
65.00
1.73
1.73
1.73
1.73
1200.00
80.00
65.00
27.89
23.16
46.55
23.39
day
day
0.33
0.33
487.00
487.00
160.71
160.71
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of each
Say
day
0.63
17.7B
Code
3229
7406
7491
1309
9999
9999
9999
9977
0116
0123
0114
17.8
Code
1396
9999
9988
Rate
368.00
Amount
231.84
2569.25
25.69
2594.94
389.24
2984.18
2984.20
Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock,
32 mm PTMT waste coupling of standard pattern, including painting of fittings
and brackets, cutting and making good the walls wherever required. White
Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT
pillar cock.
Description
Details of cost for 1 No.
MATERIAL
550x400 mm
PTMT pillar cock
PTMT - Waste Coupling 31/32 mm
Red Lead, White Lead and Gasket
Cement, sand and grit etc
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
each
each
pair
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52
550.00
129.00
36.00
65.00
1.73
1.73
1.73
1.73
550.00
129.00
36.00
65.00
27.89
23.16
46.55
23.39
day
day
day
0.33
0.33
0.67
487.00
487.00
368.00
160.71
160.71
246.56
1468.97
14.69
1483.66
222.55
1706.21
1706.20
Providing and fixing white vitreous china pedestal for wash basin completely
recessed at the back for the reception of pipes and fittings.
Description
Details of cost for one pedestal
MATERIAL
Vitrous china pedestal for wash basin
White cement mortar
TOTAL
TOTAL
Cost of each
Say
1085
Unit
Quantity
each
L.S.
L.S.
1.00
40.30
40.43
Rate
700.00
1.73
1.73
Amount
700.00
69.72
69.94
839.66
8.40
848.06
127.21
975.27
975.25
17.9
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with
rubber plug, 40 mm C.P. brass waste complete, including painting the fittings
and brackets, cutting and making good the walls wherever required:
17.9.1
White glazed fire clay kitchen sink of size 600x450x 250 mm
Code
1863
1309
1315
1952
9999
9999
9999
9977
0116
0123
0114
Description
MATERIAL
Fire clay kitchen sink: 600x450x250 mm
Painting brackets etc.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
pair
each
each
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52
1300.00
65.00
40.00
95.00
1.73
1.73
1.73
1.73
1300.00
65.00
40.00
95.00
27.89
23.16
46.55
23.39
day
day
day
0.22
0.33
0.56
487.00
487.00
368.00
107.14
160.71
206.08
2094.92
20.95
2115.87
317.38
2433.25
2433.25
17.10
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:
13983 with C.I. brackets and stainless steel plug 40 mm, including painting of
fittings and brackets, cutting and making good the walls wherever required :
17.10.1
Kitchen sink with drain board
17.10.1.1
510x1040 mm bowl depth 250 mm
Code
7095
1309
9999
9999
9977
0116
0123
0114
Description
MATERIAL
Stainless steel kitchen sink - with drain
board bowl depth 250 mm.
Painting of brackets etc.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1086
Unit
Quantity
Rate
Amount
each
pair
L.S.
L.S.
L.S.
1.00
2.00
27.04
26.91
13.52
2600.00
65.00
1.73
1.73
1.73
2600.00
130.00
46.78
46.55
23.39
day
day
day
0.22
0.60
0.82
487.00
487.00
368.00
107.14
292.20
301.76
3547.82
35.48
3583.30
537.50
4120.80
4120.80
17.10.1.2
Code
7096
1309
9999
9999
9977
0116
0123
0114
17.10.1.3
Code
7097
1309
9999
9999
9977
0116
0123
0114
17.10.1.4
Code
7098
1309
9999

Description
Unit
Quantity
each
pair
L.S.
L.S.
L.S.
1.00
2.00
27.04
26.91
13.52
2350.00
65.00
1.73
1.73
1.73
2350.00
130.00
46.78
46.55
23.39
day
day
day
0.22
0.60
0.82
487.00
487.00
368.00
107.14
292.20
301.76
3297.82
32.98
3330.80
499.62
3830.42
3830.40
Unit
Quantity
each
pair
L.S.
L.S.
L.S.
1.00
2.00
27.04
26.91
13.52
2300.00
65.00
1.73
1.73
1.73
2300.00
130.00
46.78
46.55
23.39
day
day
day
0.22
0.60
0.82
487.00
487.00
368.00
107.14
292.20
301.76
3247.82
32.48
3280.30
492.05
3772.35
3772.35
Description
Unit
Quantity

MATERIAL
Stainless steel kitchen sink - with drain
board 510x1040mm bowl depth 178 mm
each
pair
L.S.
1.00
2.00
27.04

MATERIAL
Stainlees steel kitchen sink - with drain
board 510 x 1040mm bowl depth 225 mm.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Rate
Amount

Description
MATERIAL
Stainlees steel kitchen sink - with drain
board 510 x 1040mm bowl depth 200 mm.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Rate
Amount
1087
Rate
2250.00
65.00
1.73
Amount
2250.00
130.00
46.78
Code
Description
Unit
Quantity
9999
9977
Painting brackets
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
L.S.
L.S.
26.91
13.52
1.73
1.73
46.55
23.39
day
day
day
0.22
0.60
0.82
487.00
487.00
368.00
107.14
292.20
301.76
3197.82
31.98
3229.80
484.47
3714.27
3714.25
Unit
Quantity
each
pair
L.S.
L.S.
L.S.
1.00
1.00
13.52
26.91
13.52
1500.00
65.00
1.73
1.73
1.73
1500.00
65.00
23.39
46.55
23.39
day
day
day
0.22
0.33
0.56
487.00
487.00
368.00
107.14
160.71
206.08
2132.26
21.32
2153.58
323.04
2476.62
2476.60
Description
Unit
Quantity

MATERIAL
Stainless steel kitchen sink - without
drain board 610x460mm bowl depth 200 mm.
Painting brackets
LABOUR
Fitter (grade 1)
each
pair
L.S.
L.S.
L.S.
1.00
1.00
13.52
26.91
13.52
1250.00
65.00
1.73
1.73
1.73
1250.00
65.00
23.39
46.55
23.39
day
day
0.22
0.33
487.00
487.00
107.14
160.71
0116
0123
0114
17.10.2
Kitchen sink without drain board
17.10.2.1
Code
7101
1309
9999
9999
9977
0116
0123
0114
17.10.2.2
Code
7102
1309
9999
9999
9977
0116
0123
Description
MATERIAL
Stainless steel kitchen sink - without drain
Painting brackets
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Rate
Rate
Amount
Amount
1088
Rate
Amount
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of each
Say
day
0.56
Unit
Quantity
each
pair
L.S.
L.S.
L.S.
1.00
1.00
13.52
26.91
13.52
1100.00
65.00
1.73
1.73
1.73
1100.00
65.00
23.39
46.55
23.39
day
day
day
0.22
0.33
0.56
487.00
487.00
368.00
107.14
160.71
206.08
1732.26
17.32
1749.58
262.44
2012.02
2012.00
17.10.2.3
Code
7103
1309
9999
9999
9977
0116
0123
0114
Rate
368.00
Amount
206.08
1882.26
18.82
1901.08
285.16
2186.24
2186.25

Description
MATERIAL
Stainless steel kitchen sink - without drain
Painting brackets
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Rate
Amount
17.11
Providing and fixing white vitreous china laboratory sink with C.I. brackets,
C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P.
brass trap with necessary C.P. brass unions complete, including painting of
fittings and brackets, cutting and making good the wall wherever required :
17.11.1
Size 450x300x150 mm
Code
1871
1309
1315
1952
1895
3617
9999
9999
9999
9977
Description
Unit
Quantity

MATERIAL
White vitreous china laboratry sink
450x300x150 mm
C.P.brass trap40 mm dia
C.P.brass union 40 mm dia
Sundries
each
pair
each
each
each
each
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52
1089
Rate
820.00
65.00
40.00
95.00
250.00
195.00
1.73
1.73
1.73
1.73
Amount
820.00
65.00
40.00
95.00
250.00
195.00
27.89
23.16
46.55
23.39
Code
0116
0123
0114
17.11.2
Code
1872
1309
1315
1952
1895
3617
9999
9999
9999
9977
0116
0123
0114
Description
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
day
day
day
0.22
0.33
0.56
Unit
Quantity
each
pair
each
each
each
each
L.S.
L.S.
L.S.
L.S.
1.00
1.00
1.00
1.00
1.00
1.00
16.12
13.39
26.91
13.52
1525.00
65.00
40.00
95.00
250.00
195.00
1.73
1.73
1.73
1.73
1525.00
65.00
40.00
95.00
250.00
195.00
27.89
23.16
46.55
23.39
day
day
day
0.22
0.33
0.56
487.00
487.00
368.00
107.14
160.71
206.08
2764.92
27.65
2792.57
418.89
3211.46
3211.45
487.00
487.00
368.00
Amount
107.14
160.71
206.08
2059.92
20.60
2080.52
312.08
2392.60
2392.60
Size 600x450x200 mm
Description
MATERIAL
600x450x200 mm
C.P.brass trap40 mm dia
C.P.brass union 40 mm dia
Sundries
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Rate
Amount
17.12
Providing and fixing draining board with C.I. brackets including painting of
brackets, cutting and making good the walls wherever required :
17.12.1
White glazed fire clay draining board of size 600x450x 25 mm
Code
7364
1309
9999
9999
9977
Description
Unit
Quantity

MATERIAL
White glazed fire clay draining board
600x450x25 mm
Painting brackets etc.
each
pair
L.S.
L.S.
L.S.
1.00
1.00
13.39
26.00
7.80
1090
Rate
550.00
65.00
1.73
1.73
1.73
Amount
550.00
65.00
23.16
44.98
13.49
Code
0116
0123
0114
Description
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
day
day
day
0.06
0.17
0.22
Rate
487.00
487.00
368.00
Amount
29.22
82.79
80.96
889.60
8.90
898.50
134.78
1033.28
1033.30
17.13
Providing and fixing white vitreous china water closet squatting pan (Indian
type) :
17.13.1
Long pattern W.C. pan of size 580 mm
Code
1953
9999
9977
0123
0114
17.13.2
Code
1954
9999
9977
0123
0114
Description
MATERIAL
Vitreous china indian type w.c. pan size
580 mm
LABOUR
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
L.S.
L.S.
1.00
13.39
13.52
450.00
1.73
1.73
450.00
23.16
23.39
day
day
0.50
0.50
487.00
368.00
243.50
184.00
924.05
9.24
933.29
139.99
1073.28
1073.30
Orissa pattern W.C. pan of size 580x440 mm

Description
MATERIAL
580 mm
LABOUR
Beldar
TOTAL
TOTAL
Cost of each
Say
1091
Unit
Quantity
Rate
Amount
each
L.S.
L.S.
1.00
13.39
13.52
780.00
1.73
1.73
780.00
23.16
23.39
day
day
0.50
0.50
487.00
368.00
243.50
184.00
1254.05
12.54
1266.59
189.99
1456.58
1456.60
17.14
Extra for using coloured W.C. pan instead of white W.C. pan :
17.14.1
Orissa pattern W.C. pan 580x440 mm
Code
7104
1954
17.15
Code
1955
9999
9977
0123
0114
17.16
Code
7105
1955
7106
Description
MATERIAL
Difference in cost of
Coloured Orissa pattern W.C. pan
580x440 mm
580 mm
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
1.00
980.00
980.00
each
-1.00
780.00
-780.00
200.00
2.00
202.00
30.30
232.30
232.30
Providing and fixing white vitreous china pedestal type (European type/ wash
down type) water closet pan.
Description
MATERIAL
LABOUR
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
L.S.
L.S.
1.00
13.39
13.52
700.00
1.73
1.73
700.00
23.16
23.39
day
day
0.50
0.50
487.00
368.00
243.50
184.00
1174.05
11.74
1185.79
177.87
1363.66
1363.65
Extra for using coloured pedestal type W.C pan (European type) with low level
cistern of same colour instead of white vitreous china W.C pan and cistern.
Description
MATERIAL
Coloured Pedestal type W.C. pan
580x440 mm (European type)
Deduct
Coloured Vitreous china 10 lit. low level
cistern
Deduct
1092
Unit
Quantity
Rate
Amount
each
1.00
900.00
900.00
each
-1.00
700.00
-700.00
each
1.00
1100.00
1100.00
Code
Description
7005

without fittings
TOTAL
TOTAL
Cost of each
Say
17.16A
Code
1313
9999
Unit
Quantity
each
-1.00
Rate
750.00
Amount
-750.00
550.00
5.50
555.50
83.33
638.83
638.85
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre
long with S.S. triangular plate to Eureopean type W.C. of quality and make as
approved by Engineer - in - charge.
Description
8 mm dia C.P. Brass/ S.S. Jet with flexible
tube upto 1 metre long with S.S. tringular
plate for Eureopean type W.C.(Hindware/
Kingston/Prima/Parko/Marc)
Carriage of material and fixing charges
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
11.20
Rate
200.00
1.73
Amount
200.00
19.38
219.38
2.19
221.57
33.24
254.81
254.80
17.17
Providing and fixing a pair of white vitreous china foot rests of standard pattern
for squatting pan water closet :
17.17.1
250x130x30 mm
Code
1363
9988
0123
Description
Details of cost for one pair
MATERIAL
Cement, sand including carriage of materials
LABOUR
TOTAL
TOTAL
Cost for 1 pair
Say
1093
Unit
Quantity
Rate
Amount
pair
L.S.
1.00
8.06
100.00
1.73
100.00
13.94
day
0.06
487.00
29.22
143.16
1.43
144.59
21.69
166.28
166.30
17.17.2
Code
1970
9988
0123
250x125x25 mm
Description
Details of cost for one pair
MATERIAL
Cement, sand including carriage of materials
LABOUR
TOTAL
TOTAL
Cost for 1 pair
Say
Unit
Quantity
Rate
Amount
pair
L.S.
1.00
8.06
100.00
1.73
100.00
13.94
day
0.06
487.00
29.22
143.16
1.43
144.59
21.69
166.28
166.30
17.18
Providing and fixing P.V.C. low level flushing cistern with manually controlled
device (handle lever) conforming to IS : 7231, with all fittings and fixtures
complete.
17.18.1
10 litre capacity - White
Code
7358
9977
0116
0114
17.18.2
Code
7123
9977
Description
MATERIAL
flush pipe)
LABOUR
(Considering 1 fitter and 1 beldar can fix
8 cistern in one day)
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
5.20
600.00
1.73
600.00
9.00
day
day
0.125
0.125
487.00
368.00
60.88
46.00
715.88
7.16
723.04
108.46
831.50
831.50
Unit
Quantity
each
L.S.
1.00
7.02
10 litre capacity - coloured

Description
MATERIAL
Coloured High density polythylene/ poly
propylene 10 lit. (full flush) capacity
controlled low level flushing cistern with
fittings
LABOUR
(Considering 1 fitter and 1 beldar can fix
8 cistern in one day)
1094
Rate
540.00
1.73
Amount
540.00
12.14
Code
Description
Unit
Quantity
0116
0114
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
day
day
0.125
0.125
Rate
487.00
368.00
Amount
60.88
46.00
659.02
6.59
665.61
99.84
765.45
765.45
17.19
Providing and fixing controlled flush, low level cistern made of vitreous china
with all fittings complete.
17.19.1
10 litre (full flush) capacity-white
Code
7126
9977
0116
0114
17.19.2
Code
7127
9977
0116
0114
Description
MATERIAL
White Vitreous china 10 lit. (full flush)
capacity controlled low level flushing
cistern with all fittings
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
13.52
800.00
1.73
800.00
23.39
day
day
0.50
0.50
487.00
368.00
243.50
184.00
1250.89
12.51
1263.40
189.51
1452.91
1452.90
Unit
Quantity
each
L.S.
1.00
13.52
1200.00
1.73
1200.00
23.39
day
day
0.50
0.50
487.00
368.00
243.50
184.00
1650.89
16.51
1667.40
250.11
1917.51
1917.50
10 litre (full flush) capacity-coloured

Description
MATERIAL
Coloured Vitreous china 10 lit. (full flush)
capacity controlled low level flushing
cistern with all fittings
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1095
Rate
Amount
17.20
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan
complete :
17.20.1
White solid plastic seat with lid
Code
1875
9988
17.20.2
Code
1876
9988
17.20.3
Code
7107
9988
Description
MATERIAL
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.39
Unit
Quantity
each
L.S.
1.00
13.39
Rate
330.00
1.73
Amount
330.00
23.16
353.16
3.53
356.69
53.50
410.19
410.20
Black solid plastic seat with lid

Description
MATERIAL
TOTAL
TOTAL
Cost of each
Say
Rate
310.00
1.73
Amount
310.00
23.16
333.16
3.33
336.49
50.47
386.96
386.95
Coloured (other than black & white) solid plastic seat with lid
Description
MATERIAL
Coloured (other than black) solid P.V.C.
seat in European W.C. pan
TOTAL
TOTAL
Cost of each
Say
1096
Unit
Quantity
each
L.S.
1.00
13.39
Rate
405.00
1.73
Amount
405.00
23.16
428.16
4.28
432.44
64.87
497.31
497.30
17.22
Code
1614
9988
17.22A
Code
7121
9988
17.22B
Providing and fixing G.I. inlet connection for flush pipe connecting with
W.C. pan.
Description
MATERIAL
G.I. inlet connection
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.39
Rate
60.00
1.73
Amount
60.00
23.16
83.16
0.83
83.99
12.60
96.59
96.60
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality
& make and as per the direction of Engineer-in-charge.
Description
MATERIAL
Bottle Trap (Hindware/ Kingston/ Prima/
Parko / Marc)
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
20.00
Rate
650.00
1.73
Amount
650.00
34.60
684.60
6.85
691.45
103.72
795.17
795.15
Providing and fixing CP Brass Single lever telephonic wall mixer of quality
& make as approved by Engineer in charge.
(a) 15 mm nominal dia
Code
7122
9977
Description
MATERIAL
CP Brass Single lever telephonic wall mixer
of approved make (Hindware/Kingston/
Prima /Parko/ Mark)
TOTAL
TOTAL
Cost of each
Say
1097
Unit
Quantity
each
L.S.
1.00
34.71
Rate
4000.00
1.73
Amount
4000.00
60.05
4060.05
40.60
4100.65
615.10
4715.75
4715.75
17.23
Code
1913
9977
0116
0114
17.24
Code
1915
9999
9977
0116
0123
0114
Providing and fixing white vitreous china flat back or wall corner type lipped
front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
9.49
460.00
1.73
460.00
16.42
day
day
0.38
0.38
487.00
368.00
185.06
139.84
801.32
8.01
809.33
121.40
930.73
930.75
Providing and fixing white vitreous china squatting plate urinal with integral
rim longitudinal flush pipe.
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
L.S.
L.S.
1.00
10.79
13.39
1053.00
1.73
1.73
1053.00
18.67
23.16
day
day
day
0.50
0.50
1.00
487.00
487.00
368.00
243.50
243.50
368.00
1949.83
19.50
1969.33
295.40
2264.73
2264.75
17.25
Providing and fixing white vitreous china wash basin including making all
connections but excluding the cost of fittings :
17.25.1
Flat back wash basin of size 630x450 mm
Code
Description
Unit
Quantity
1947

MATERIAL
630x450 mm
Fixing charges
each
L.S.
1.00
53.82
9999
1098
Rate
725.00
1.73
Amount
725.00
93.11
Code
Description
Unit
Quantity
9977
TOTAL
TOTAL
Cost of each
Say
L.S.
9.49
17.25.2
Code
3229
9999
9977
17.25.3
Code
1949
9999
9977
17.25.4
1.73
Amount
16.42
834.53
8.35
842.88
126.43
969.31
969.30

Description
MATERIAL
550x400 mm
Fixing charges
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
L.S.
1.00
53.82
9.49
Rate
550.00
1.73
1.73
Amount
550.00
93.11
16.42
659.53
6.60
666.13
99.92
766.05
766.05
Angle back wash basin of size 600x480 mm

Description
MATERIAL
600x480 mm
Fixing charges
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
L.S.
1.00
53.82
9.49
Rate
725.00
1.73
1.73
Amount
725.00
93.11
16.42
834.53
8.35
842.88
126.43
969.31
969.30
Angle back wash basin of size 400x400 mm
Code
Description
Unit
Quantity
1950

MATERIAL
400x400 mm
Fixing charges
each
L.S.
1.00
53.82
9999
Rate
1099
Rate
425.00
1.73
Amount
425.00
93.11
Code
Description
Unit
Quantity
9977
TOTAL
TOTAL
Cost of each
Say
L.S.
9.49
17.25.5
Code
7004
9999
9977
17.25.6
Code
3213
9999
9977
Rate
1.73
Amount
16.42
534.53
5.35
539.88
80.98
620.86
620.85

Description
MATERIAL
450x300 mm
Fixing charges
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
L.S.
1.00
53.82
9.49
Rate
325.00
1.73
1.73
Amount
325.00
93.11
16.42
434.53
4.35
438.88
65.83
504.71
504.70
Surgeon type wash basin of size 660x460 mm

Description
MATERIAL
size 660x460 mm
Fixing charges
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
L.S.
1.00
53.82
9.49
Rate
1000.00
1.73
1.73
Amount
1000.00
93.11
16.42
1109.53
11.10
1120.63
168.09
1288.72
1288.70
17.26
Providing and fixing kitchen sink including making all connections excluding
cost of fittings.
17.26.1
White glazed fire clay sink of size 600x450x250 mm
Code
Description
Unit
Quantity
1863
9999

MATERIAL
Fire clay kitchen sink: 600x450x250 mm
Fixing charges
each
L.S.
1.00
40.43
1100
Rate
1300.00
1.73
Amount
1300.00
69.94
Code
Description
Unit
Quantity
9977
TOTAL
TOTAL
Cost of each
Say
L.S.
10.79
Rate
1.73
Amount
18.67
1388.61
13.89
1402.50
210.38
1612.88
1612.90
17.27
Providing and fixing white vitreous china laboratory sink including making
all connections excluding cost of fittings :
17.27.1
Size 450x300x150 mm
Code
1871
9999
9977
17.27.2
Code
1872
9999
9977
Description
MATERIAL
450x300x150 mm
Fixing charges
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
L.S.
1.00
40.43
10.79
Unit
Quantity
each
L.S.
L.S.
1.00
40.43
10.79
Rate
820.00
1.73
1.73
Amount
820.00
69.94
18.67
908.61
9.09
917.70
137.66
1055.36
1055.35
Size 600x450x200 mm
Description
MATERIAL
600x450x200 mm
Fixing charges
TOTAL
TOTAL
Cost of each
Say
1101
Rate
1525.00
1.73
1.73
Amount
1525.00
69.94
18.67
1613.61
16.14
1629.75
244.46
1874.21
1874.20
17.28
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.
17.28.1
Semi rigid pipe
17.28.1.1 32 mm dia
Code
7117
9988
Description
MATERIAL
Semi Rigid PVC waste pipe for sink and
wash basin 32 mm dia with length not less
than 700 mm i/c PVC waste fittings
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
20.28
Unit
Quantity
each
L.S.
1.00
20.28
Unit
Quantity
each
L.S.
1.00
20.28
Rate
30.00
1.73
Amount
30.00
35.08
65.08
0.65
65.73
9.86
75.59
75.60
17.28.1.2 40 mm dia
Code
7118
9988
17.28.2
Description
MATERIAL
Semi Rigid PVC waste pipe for sink and
wash basin 40 mm dia with length not less
than 700 mm i/c PVC waste fittings
TOTAL
TOTAL
Cost of each
Say
Rate
35.00
1.73
Amount
35.00
35.08
70.08
0.70
70.78
10.62
81.40
81.40
Flexible pipe
17.28.2.1 32 mm dia
Code
7119
9988
Description
MATERIAL
Flexible (coil shaped) PVC waste pipe for
sink and wash basin 32 mm dia with length
not less than 700 mm i/c PVC waste
fittings
TOTAL
TOTAL
Cost of each
Say
1102
Rate
28.00
1.73
Amount
28.00
35.08
63.08
0.63
63.71
9.56
73.27
73.25
17.28.2.2 40 mm dia
Code
7120
9988
17.29
Code
1369
9988
17.30
Code
1350
9988
Description
MATERIAL
Flexible (coil shaped) PVC waste pipe for
sink and wash basin 40 mm dia with length
not less than 700 mm i/c PVC waste
fittings
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
20.28
Rate
Amount
30.00
1.73
30.00
35.08
65.08
0.65
65.73
9.86
75.59
75.60
Providing and fixing 100 mm sand cast Iron grating for gully trap.
Description
MATERIAL
S.C.I. gully or nahani grating 100 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
4.16
Rate
18.00
1.73
Amount
18.00
7.20
25.20
0.25
25.45
3.82
29.27
29.25
Providing and fixing in position 25 mm diameter mosquito proof coupling

of approved municipal design.
Description
MATERIAL
TOTAL
TOTAL
Cost of each
Say
1103
Unit
Quantity
each
L.S.
1.00
1.82
Rate
30.00
1.73
Amount
30.00
3.15
33.15
0.33
33.48
5.02
38.50
38.50
17.31
Code
1392
7116
9.32
0588
9977
9999
0112
0114
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of
approved quality) complete with 6 mm thick hard board ground fixed to
wooden cleats with C.P. brass screws and washers complete.
Description
MATERIAL
Mirror of superior make glass 60x45 cm
Hard board 6 mm thick
600x450 mm
Wooden cleats
Rate as per item no 9.32 of SH : Wood and
PVC work
Sundries
LABOUR
Carpenter 2nd class
Beldar
TOTAL
i.e. on (716.35 - 87.40) = 628.95
TOTAL
- 87.40) = 635.24
Cost of each
Say
Unit
Quantity
Rate
Amount
each
sqm
1.00
0.27
310.00
120.00
310.00
32.40
each
100 Nos
L.S.
L.S.
4.00
0.04
4.16
1.43
21.85
190.00
1.73
1.73
87.40(A)
7.60
7.20
2.47
day
day
0.33
0.33
448.00
368.00
147.84
121.44
716.35
6.29
722.64
95.29
817.93
817.95
17.32
Providing and fixing mirror of superior glass (of approved quality) and of
required shape and size with plastic moulded frame of approved make and
shade with 6 mm thick hard board backing :
17.32.1
Circular shape 450 mm dia
Code
7112
7116
7048
0588
9999
9977
0112
Description
MATERIAL
Circular shape 450 mm dia Mirror with
Plastic moulded frame
Hard board 0.45x0.45 = 0.2025 sqm
Add wastage @ 10% = 0.0203 sqm
= 0.2228 sqm say 0.22sqm
Rawl plug 50 mm (designation 10 no.)
Sundries
LABOUR
Carpenter 2nd class
1104
Unit
Quantity
Rate
Amount
each
1.00
450.00
450.00
sqm
each
100 Nos
L.S.
L.S.
0.22
2.00
0.02
1.43
4.16
120.00
10.00
190.00
1.73
1.73
26.40
20.00
3.80
2.47
7.20
day
0.33
448.00
147.84
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of each
Say
day
0.33
17.32.2
Rectangular shape 453x357 mm

Unit
Quantity
each
1.00
300.00
300.00
sqm
each
100 Nos
L.S.
L.S.
0.18
4.00
0.04
1.43
4.16
120.00
10.00
190.00
1.73
1.73
21.60
40.00
7.60
2.47
7.20
day
day
0.33
0.33
448.00
368.00
147.84
121.44
648.15
6.48
654.63
98.19
752.82
752.80
Code
7113
7116
7048
0588
9999
9977
0112
0114
17.32.3
Code
7114
7116
7048
0588
9999
9977
Description
MATERIAL
Rectangular shape 453x357 mm Mirror with
Plastic moulded frame
Hard board 0.453x0.357 = 0.1617 sqm
= 0.1779 sqm say 0.18 sqm
Sundries
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost of each
Say
Rate
368.00
Rate
Amount
121.44
779.15
7.79
786.94
118.04
904.98
905.00
Amount
Oval shape 450x350 mm (outer dimensions)

Description
MATERIAL
Ovel shape 450x350 mm (outer dimensions)
Mirror with Plastic moulded frame
Hard board 0.45x0.35=0.1575 sqm
= 0.1733 sqm say 0.17 sqm
Sundries
1105
Unit
Quantity
Rate
Amount
each
1.00
350.00
350.00
sqm
each
100 Nos
L.S.
L.S.
0.17
4.00
0.04
1.43
4.16
120.00
10.00
190.00
1.73
1.73
20.40
40.00
7.60
2.47
7.20
Code
0112
0114
17.32.4
Code
7115
7116
7048
0588
9999
9977
0112
0114
17.33
Code
3228
7048
0586
9977
Description
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
day
day
0.33
0.33
Unit
Quantity
each
1.00
700.00
700.00
sqm
each
100 Nos
L.S.
L.S.
0.74
6.00
0.06
1.43
4.16
120.00
10.00
190.00
1.73
1.73
88.80
60.00
11.40
2.47
7.20
day
day
0.33
0.33
448.00
368.00
147.84
121.44
1139.15
11.39
1150.54
172.58
1323.12
1323.10
448.00
368.00
Amount
147.84
121.44
696.95
6.97
703.92
105.59
809.51
809.50
Rectangular shape 1500x450 mm

Description
MATERIAL
Rectangular shape 1500x450 mm Mirror
with Plastic moulded frame
Hard board 1.50x0.45 = 0.675 sqm
= 0.7425 sqm say 0.74sqm
Sundries
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost of each
Say
Rate
Amount
Providing and fixing 600x120x5 mm glass shelf with edges round off,
supported on anodised aluminium angle frame with C.P. brass brackets
and guard rail complete fixed with 40 mm long screws, rawl plugs etc.,
complete.
Description
Unit

MATERIAL
600x120 mm glass shelf with anodised
aluminium angle frame, C.P. brass
brackets and guard rail of standard size
1106
each
each
100 Nos
L.S.
Quantity
1.00
2.00
0.04
4.16
Rate
250.00
10.00
310.00
1.73
Amount
250.00
20.00
12.40
7.20
Code
0112
0114
Description
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
day
day
0.25
0.25
17.34
Providing and fixing toilet paper holder :
17.34.1
C.P. brass
Code
1889
9.32
0588
9977
0112
0114
17.34.2
Code
3749
9.32
0588
9977
Description
MATERIAL
C.P.brass toilet paper holder of standard size
Wooden cleats
PVC work
LABOUR
Carpenter 2nd class
Beldar
TOTAL
i.e. on (337.84 - 43.70) = 294.14
TOTAL
= 297.08
Cost of each
Say
Rate
448.00
368.00
Rate
Amount
112.00
92.00
493.60
4.94
498.54
74.78
573.32
573.30
Unit
Quantity
Amount
each
1.00
185.00
185.00
each
100 Nos
L.S.
2.00
0.02
4.29
21.85
190.00
1.73
43.70(A)
3.80
7.42
day
day
0.12
0.12
448.00
368.00
53.76
44.16
337.84
2.94
340.78
44.56
385.34
385.35
Vitreous china
Description
Details of cost of one no.
MATERIAL
Vitreous china toilet paper holder of
standard size
Wooden cleats
Rate as per item no 9.32 of SH : Wood
and PVC work
1107
Unit
Quantity
Rate
Amount
each
1.00
100.00
100.00
each
100 Nos
L.S.
2.00
0.06
4.29
21.85
190.00
1.73
43.70(A)
11.40
7.42
Code
0112
0114
Description
LABOUR
Carpenter 2nd class
Beldar
TOTAL
i.e. on (260.44 - 43.70) = 216.74
TOTAL
= 218.91
Cost of each
Say
Unit
Quantity
day
day
0.12
0.12
Rate
448.00
368.00
Amount
53.76
44.16
260.44
2.17
262.61
32.84
295.45
295.45
17.35
Providing and fixing soil, waste and vent pipes :
17.35.1
100 mm dia
17.35.1.1 Sand cast iron S&S pipe as per IS: 1729

Code
1617
9999
9977
0116
0100
0114
Description
Details of cost for 17.37 m
(1.8mx10)-(9x0.07m) = 17.37 m
MATERIAL
S.C.I. soil, waste and vent single socketed
pipe 1.80 metres long: 100mm dia
Scaffolding
LABOUR
Fitter (grade 1)
Bandhani
Beldar
TOTAL
TOTAL
Cost for 17.37 m pan
Cost per metre
Say
Unit
Quantity
Rate
Amount
each
L.S.
L.S.
10.50
80.73
53.82
1150.00
1.73
1.73
12075.00
139.66
93.11
day
day
day
0.42
0.21
0.83
487.00
407.00
368.00
204.54
85.47
305.44
12903.22
129.03
13032.25
1954.84
14987.09
862.81
862.80
17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
Code
Description
Unit
Quantity
3620

(1.75mx10)-(9x0.07m) = 16.87 m
MATERIAL
C.C.I.(spun) socketed soil, waste and vent
pipe 1.80 metres long:100mm dia
Scaffolding
each
L.S.
L.S.
10.50
80.73
53.82
9999
9977
1108
Rate
1196.00
1.73
1.73
Amount
12558.00
139.66
93.11
Code
0116
0100
0114
Description
LABOUR
Fitter (grade 1)
Bandhani
Beldar
TOTAL
TOTAL
Cost per metre
Say
Unit
Quantity
day
day
day
0.42
0.21
0.83
Rate
487.00
407.00
368.00
Amount
204.54
85.47
305.44
13386.22
133.86
13520.08
2028.01
15548.09
921.64
921.65
17.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside &
outside IS:15905
Code
7621
9999
9977
0116
0100
0114
17.35.2
Description
Detail of cost for 18.00 m (6 x 3.00 m)
MATERIAL
Hubless centrifugally cast (spun) iron pipes
as per IS 15905 - 100 mm dia (3000 mm
length pipe)
i/c (3% wastage)
Scaffolding
LABOUR
Fitter (grade 1)
Bandhani
Beldar
TOTAL
TOTAL
Cost of 18.00 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
metre
18.54
729.00
13515.66
L.S.
L.S.
80.73
53.82
1.73
1.73
139.66
93.11
day
day
day
0.42
0.21
0.83
487.00
407.00
368.00
204.54
85.47
305.44
14343.88
143.44
14487.32
2173.10
16660.42
925.57
925.55
75 mm diameter :
17.35.2.1 Sand cast iron S&S pipe as per IS: 1729

Code
1616
9999
9977
Description
Unit
Quantity

(1.8mx10)-(9x0.065m) = 17.415 m say
17.42 m
MATERIAL
Scaffolding
each
L.S.
L.S.
10.50
80.73
40.38
1109
Rate
950.00
1.73
1.73
Amount
9975.00
139.66
69.86
Code
0116
0100
0114
Description
LABOUR
Fitter (grade 1)
Bandhani
Beldar
TOTAL
TOTAL
Cost per metre
Say
Unit
Quantity
day
day
day
0.35
0.17
0.70
Rate
487.00
407.00
368.00
Amount
170.45
69.19
257.60
10681.76
106.82
10788.58
1618.29
12406.87
712.21
712.20
17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989
Code
3621
9999
9977
0116
0100
0114
Description
(1.75mx10)-(9x0.065m) = 16.915 m
say 16.92 m
MATERIAL
C.C.I.(spun) socketed soil, waste and vent
including 5% allowance for wastage
Scaffolding
LABOUR
Fitter (grade 1)
Bandhani
Beldar
TOTAL
TOTAL
Cost per metre
Say
Unit
Quantity
Rate
Amount
each
10.50
1035.00
10867.50
L.S.
L.S.
80.73
40.38
1.73
1.73
139.66
69.86
day
day
day
0.35
0.17
0.70
487.00
407.00
368.00
170.45
69.19
257.60
11574.26
115.74
11690.00
1753.50
13443.50
794.53
794.55
outside IS:15905
Code
7622
9999
9977
0116
0100
Description
Detail of cost for 18.00 m (6 x 3.00 m)
MATERIAL
Hubless centrifugally cast (spun) iron pipes
as per IS 15905 - 75 mm dia (3000 mm
length pipe)
i/c (3% wastage)
Scaffolding
LABOUR
Fitter (grade 1)
Bandhani
1110
Unit
Quantity
Rate
Amount
metre
18.54
597.00
11068.38
L.S.
L.S.
80.73
40.38
1.73
1.73
139.66
69.86
day
day
0.35
0.17
487.00
407.00
170.45
69.19
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 18.00 metre
Cost of 1 metre
Say
day
0.70
Rate
368.00
Amount
257.60
11775.14
117.75
11892.89
1783.93
13676.82
759.82
759.80
17.36
Providing and filling the joints with spun yarn, cement slurry and cement
mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
17.36.1
75 mm dia pipe
Code
9999
0116
0114
17.36.2
Code
9999
0116
0114
17.37
Description
Details of cost for 4 joints
MATERIAL
Cement mortar, spun yarn etc.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 4 joints
Cost of 1 joint
Say
Unit
Quantity
Rate
Amount
L.S.
6.89
1.73
11.92
day
day
0.28
0.28
487.00
368.00
136.36
103.04
251.32
2.51
253.83
38.07
291.90
72.97
72.95
Unit
Quantity
L.S.
8.06
1.73
13.94
day
day
0.33
0.33
487.00
368.00
160.71
121.44
296.09
2.96
299.05
44.86
343.91
85.97
85.95
100 mm dia pipe

Description
MATERIAL
Cement mortar, spun yarn etc.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 4 joints
Cost of 1 joint
Say
Rate
Amount
Providing and fixing M.S. holder-bat clamps of approved design to Sand

Cast iron/cast iron (spun) pipe embedded in and including cement concrete
blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), including cost of cutting holes and making
good the walls etc. :
1111
17.37.1
Code
1331
9977
0116
0124
0114
9999
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0128
9999
9999
9999
17.37.2
Code
1332
9977
0116
0124
0114
9999
For 100 mm dia pipe

Description
MATERIAL
M.S.Holder bat clamp of approved design
for 100 mm S.C.I. pipe
Carriage of bat clamps
LABOUR
Fitter (grade 1)
Beldar
Sundries
nominal size
nominal size
nominal size
Carriage of Cement
Beldar
Coolie
Bhisti
Mate
Hire charges of machine etc.
Sundries
Sundries
TOTAL
TOTAL
Cost of 5.00 bat clamps
Cost of each
Say
Unit
Quantity
Rate
Amount
each
L.S.
5.00
2.47
20.00
1.73
100.00
4.27
day
day
day
L.S.
0.125
0.75
0.50
7.15
487.00
448.00
368.00
1.73
60.88
336.00
184.00
12.37
cum
0.0033
1300.00
4.29
cum
0.0011
1300.00
1.43
cum
cum
cum
tonne
tonne
day
day
day
day
day
day
L.S.
L.S.
L.S.
0.0044
0.0022
0.0022
0.0016
0.0016
0.0045
0.0032
0.0014
0.0003
0.0003
0.0002
0.26
0.13
0.13
103.77
1200.00
103.77
5700.00
92.24
368.00
368.00
407.00
487.00
448.00
407.00
1.73
1.73
1.73
0.46
2.64
0.23
9.12
0.15
1.66
1.18
0.57
0.15
0.13
0.08
0.45
0.22
0.22
720.50
7.21
727.71
109.16
836.87
167.37
167.35
Unit
Quantity
Rate
each
L.S.
5.00
2.47
18.00
1.73
90.00
4.27
day
day
day
L.S.
0.125
0.75
0.50
7.15
487.00
448.00
368.00
1.73
60.88
336.00
184.00
12.37
For 75 mm dia pipe

Description
MATERIAL
M.S.Holder bat clamp of approved design
for75 mm S.C.I. pipe
Carriage of bat clamps
LABOUR
Fitter (grade 1)
Beldar
Sundries
C.C. Black 5x0.1x0.1x0.1 = 0.005 cum
1112
Amount
Code
Description
0295

nominal size
nominal size
nominal size
Carriage of Cement
Beldar
Coolie
Bhisti
Mate
Hire charges of machine etc.
Sundries
Sundries
TOTAL
TOTAL
Cost of 5.00 bat clamps
Cost of each
Say
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0128
9999
9999
9999
Unit
Quantity
Rate
Amount
cum
0.0033
1300.00
4.29
cum
0.0011
1300.00
1.43
cum
cum
cum
tonne
tonne
day
day
day
day
day
day
L.S.
L.S.
L.S.
0.0044
0.0022
0.0022
0.0016
0.0016
0.0045
0.0032
0.0014
0.0003
0.0003
0.0002
0.26
0.13
0.13
103.77
1200.00
103.77
5700.00
92.24
368.00
368.00
407.00
487.00
448.00
407.00
1.73
1.73
1.73
0.46
2.64
0.23
9.12
0.15
1.66
1.18
0.57
0.15
0.13
0.08
0.45
0.22
0.22
710.50
7.11
717.61
107.64
825.25
165.05
165.05
17.38
Providing and fixing bend of required degree with access door, insertion
rubber washer 3 mm thick, bolts and nuts complete.
17.38.1
100 mm dia
17.38.1.1 Sand cast iron S&S as per IS - 1729

Code
1625
1374
9988
Description
MATERIAL
S.C.I. bend with access door 100mm dia
Rubber insertions for 100 mm dia pipe joints
TOTAL
TOTAL
Cost of each
Say
1113
Unit
Quantity
each
each
L.S.
1.00
1.00
13.52
Rate
252.00
18.00
1.73
Amount
252.00
18.00
23.39
293.39
2.93
296.32
44.45
340.77
340.75

Code
3624
1374
9988
Description
MATERIAL
S.C.I. S&S bends with access door
100mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
each
L.S.
1.00
1.00
13.52
Rate
290.00
18.00
1.73
Amount
290.00
18.00
23.39
331.39
3.31
334.70
50.21
384.91
384.90
17.38.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as
per IS:15905
Code
7639
1374
9977
17.38.2
Description
Detail of cost for one no.
MATERIAL
Hubless centrifugally cast (spun) iron bend
with access door - 100 mm dia as per IS
15905
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
each
L.S.
1.00
1.00
13.52
Unit
Quantity
each
each
L.S.
1.00
1.00
10.79
Rate
380.00
18.00
1.73
Amount
380.00
18.00
23.39
421.39
4.21
425.60
63.84
489.44
489.45
75 mm dia

Code
1624
1373
9988
Description
MATERIAL
S.C.I. bend with access door 75mm dia
TOTAL
TOTAL
Cost of each
Say
1114
Rate
200.00
15.00
1.73
Amount
200.00
15.00
18.67
233.67
2.34
236.01
35.40
271.41
271.40
17.38.2.2 Sand cast iron S&S as per IS- 3989

Code
3625
1373
9988
Description
MATERIAL
S.C.I. S&S bends with access door75mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
each
L.S.
1.00
1.00
10.79
Rate
240.00
15.00
1.73
Amount
240.00
15.00
18.67
273.67
2.74
276.41
41.46
317.87
317.85
17.38.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as
per IS:15905
Code
7640
1373
9977
Description
MATERIAL
Hubless centrifugally cast (spun) iron bend
with access door - 75 mm dia as per IS
15905 including cost of bolts & nuts.
3mm thick
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
each
1.00
1.00
303.00
15.00
303.00
15.00
L.S.
10.79
1.73
18.67
336.67
3.37
340.04
51.01
391.05
391.05
17.39
Providing and fixing plain bend of required degree.
17.39.1
100 mm dia
Rate
Amount

Code
1621
9988
Description
MATERIAL
S.C.I. plain bend 100 mm dia
TOTAL
TOTAL
Cost of each
Say
1115
Unit
Quantity
each
L.S.
1.00
13.52
Rate
350.00
1.73
Amount
350.00
23.39
373.39
3.73
377.12
56.57
433.69
433.70
17.39.1.2 Sand cast iron S&S as per IS : 3989

Code
3628
9988
Description
MATERIAL
S.C.I. S&S bend100mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Rate
265.00
1.73
Amount
265.00
23.39
288.39
2.88
291.27
43.69
334.96
334.95
outside IS:15905
Code
7623
9977
17.39.2
Description
MATERIAL
Hubless centrifugally cast (spun) iron plain
bend as per IS 15905- 100 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
10.79
Rate
241.00
1.73
Amount
241.00
23.39
264.39
2.64
267.03
40.05
307.08
307.10
75 mm dia
17.39.2.1 Sand cast iron S&S as per IS -1729

Code
1620
9988
Description
MATERIAL
TOTAL
TOTAL
Cost of each
Say
1116
Rate
170.00
1.73
Amount
170.00
18.67
188.67
1.89
190.56
28.58
219.14
219.15

Code
3629
9988
Description
MATERIAL
S.C.I. S&S bend75mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
10.79
Rate
195.00
1.73
Amount
195.00
18.67
213.67
2.14
215.81
32.37
248.18
248.20
outside IS:15905
Code
7624
9977
Description
MATERIAL
Hubless centrifugally cast (spun) iron plain
bend as per IS 15905 - 75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
10.79
17.40
Providing and fixing heel rest sanitary bend
17.40.1
100 mm dia
Rate
164.00
1.73
Amount
164.00
18.67
182.67
1.83
184.50
27.68
212.18
212.20

Code
1667
9988
Description
MATERIAL
Sand cast iron heel rest bend 100mm dia
TOTAL
TOTAL
Cost of each
Say
1117
Unit
Quantity
each
L.S.
1.00
13.52
Rate
250.00
1.73
Amount
250.00
23.39
273.39
2.73
276.12
41.42
317.54
317.55

Code
3634
9988
17.40.2
Description
MATERIAL
S.C.I. S&S heel rest sanitary bend 100mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
10.79
Unit
Quantity
each
L.S.
1.00
10.79
Rate
296.00
1.73
Amount
296.00
23.39
319.39
3.19
322.58
48.39
370.97
370.95
75 mm dia

Code
1666
9988
Description
MATERIAL
Sand cast iron heel rest bend75mm dia
TOTAL
TOTAL
Cost of each
Say
Rate
220.00
1.73
Amount
220.00
18.67
238.67
2.39
241.06
36.16
277.22
277.20

Code
3635
9988
Description
MATERIAL
S.C.I. S&S heel rest sanitary bend 75mm dia
TOTAL
TOTAL
Cost of each
Say
Rate
250.00
1.73
Amount
250.00
18.67
268.67
2.69
271.36
40.70
312.06
312.05
17.41
Providing and fixing double equal junction of required degree with access
door, insertion rubber washer 3 mm thick, bolts and nuts complete :
17.41.1
100x100x100x100 mm
1118

Code
1637
1374
9988
Description
MATERIAL
S.C.I. double equal junctions 100x100x
100x100 mm dia with access door.
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
each
L.S.
1.00
1.00
13.39
Unit
Quantity
each
each
L.S.
1.00
1.00
13.39
Unit
Quantity
each
each
L.S.
1.00
1.00
10.79
Rate
550.00
18.00
1.73
Amount
550.00
18.00
23.16
591.16
5.91
597.07
89.56
686.63
686.65

Code
3654
1374
9988
17.41.2
Description
MATERIAL
S.C.I. S&S double equal junctions with
access door 100x100x100x100 mm.
TOTAL
TOTAL
Cost of each
Say
Rate
615.00
18.00
1.73
Amount
615.00
18.00
23.16
656.16
6.56
662.72
99.41
762.13
762.15
75x75x75x75 mm

Code
1636
1373
9988
Description
MATERIAL
S.C.I. double equal junctions75x75x75x
75 mm dia with access door.
TOTAL
TOTAL
Cost of each
Say
1119
Rate
425.00
15.00
1.73
Amount
425.00
15.00
18.67
458.67
4.59
463.26
69.49
532.75
532.75

Code
3655
1373
9988
Description
MATERIAL
S.C.I. S&S double equal junctions with
access door 75x75x75x75 mm.
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
each
L.S.
1.00
1.00
10.79
Rate
480.00
15.00
1.73
Amount
480.00
15.00
18.67
513.67
5.14
518.81
77.82
596.63
596.65
17.42
Providing and fixing double equal plain junction of required degree.
17.42.1
100x100x100x100 mm

Code
1634
9988
Description
MATERIAL
S.C.I. plain double equal junctions
100x100x100x100 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
13.52
Rate
520.00
1.73
Amount
520.00
23.39
543.39
5.43
548.82
82.32
631.14
631.15

Code
3650
9988
Description
MATERIAL
S.C.I. S&S double equal junctions
100x100x100x100 mm
TOTAL
TOTAL
Cost of each
Say
1120
Rate
620.00
1.73
Amount
620.00
23.39
643.39
6.43
649.82
97.47
747.29
747.30
outside IS:15905
Code
7625
9977
17.42.2
Description
MATERIAL
Hubless centrifugally cast (spun) iron
double equal plain junction as per IS 15905
- 100x100x100x100 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
10.79
Unit
Quantity
each
L.S.
1.00
10.79
Rate
532.00
1.73
Amount
532.00
23.39
555.39
5.55
560.94
84.14
645.08
645.10
75x75x75x75 mm

Code
1633
9988
Description
MATERIAL
S.C.I. plain double equal junctions
75x75x75x75 mm dia
TOTAL
TOTAL
Cost of each
Say
Rate
346.00
1.73
Amount
346.00
18.67
364.67
3.65
368.32
55.25
423.57
423.55

Code
3651
9988
Description
MATERIAL
S.C.I. S&S double equal junctions
75x75x75x75 mm
TOTAL
TOTAL
Cost of each
Say
1121
Rate
462.00
1.73
Amount
462.00
18.67
480.67
4.81
485.48
72.82
558.30
558.30
outside IS:15905
Code
7626
9977
Description
MATERIAL
double equal plain junction as per IS 15905
- 75x75x75x75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
10.79
Rate
286.00
1.73
Amount
286.00
18.67
304.67
3.05
307.72
46.16
353.88
353.90
17.43
Providing and fixing single equal plain junction of required degree with
access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
17.43.1
100x100x100 mm

Code
1631
1374
9988
Description
MATERIAL
S.C.I. single equal junctions 100x100x
100 mm dia with access door.
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
each
L.S.
1.00
1.00
13.52
Unit
Quantity
each
each
L.S.
1.00
1.00
13.52
Rate
376.00
18.00
1.73
Amount
376.00
18.00
23.39
417.39
4.17
421.56
63.23
484.79
484.80

Code
3644
1374
9988
Description
MATERIAL
S.C.I. S&S single equal junctions with
access door 100x100x100 mm
TOTAL
TOTAL
Cost of each
Say
1122
Rate
495.00
18.00
1.73
Amount
495.00
18.00
23.39
536.39
5.36
541.75
81.26
623.01
623.00
17.43.2
75x75x75 mm

Code
1630
1373
9988
Description
MATERIAL
S.C.I. single equal junctions75x75x75 mm
dia with access door.
TOTAL
TOTAL
Add 15 % Contractors profit and overheads
Cost of each
Say
Unit
Quantity
each
each
L.S.
1.00
1.00
10.79
Unit
Quantity
each
each
L.S.
1.00
1.00
10.79
Rate
278.00
15.00
1.73
Amount
278.00
15.00
18.67
311.67
3.12
314.79
47.22
362.01
362.00

Code
3645
1373
9988
Description
MATERIAL
S.C.I. S&S single equal junctions with
TOTAL
TOTAL
Cost of each
Say
Rate
373.00
15.00
1.73
Amount
373.00
15.00
18.67
406.67
4.07
410.74
61.61
472.35
472.35
17.44
Providing and fixing single equal plain junction of required degree :
17.44.1
100x100x100 mm

Code
1628
9988
Description
MATERIAL
S.C.I. plain single equal junctions
100x100x100 mm dia
TOTAL
TOTAL
Cost of each
Say
1123
Unit
Quantity
each
L.S.
1.00
13.52
Rate
450.00
1.73
Amount
450.00
23.39
473.39
4.73
478.12
71.72
549.84
549.85

Code
3640
9988
Description
MATERIAL
S.C.I. S&S single equal junctions
100x100x100 mm
TOTAL
TOTAL
Cost of each
Say
17.44.1.3 Hubless centrifugally cast

as per IS:15905
Code
7627
9977
17.44.2
Unit
Quantity
each
L.S.
1.00
13.52
Rate
472.00
1.73
Amount
472.00
23.39
495.39
4.95
500.34
75.05
575.39
575.40
(spun) iron epoxy coated inside & outside
Description
MATERIAL
Hubless centrifugally cast (spun) iron single
equal plain junction as per IS 15905 100x100x100 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
10.79
Rate
410.00
1.73
Amount
410.00
23.39
433.39
4.33
437.72
65.66
503.38
503.40
75x75x75 mm

Code
1627
9988
Description
MATERIAL
75x75x75 mm dia
TOTAL
TOTAL
Cost of each
Say
1124
Rate
265.00
1.73
Amount
265.00
18.67
283.67
2.84
286.51
42.98
329.49
329.50

Code
3641
9988
Description
MATERIAL
S.C.I. S&S single equal junctions
75x75x75 mm
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
10.79
Rate
330.00
1.73
Amount
330.00
18.67
348.67
3.49
352.16
52.82
404.98
405.00
17.44.2.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
IS:15905
Code
7628
9977
Description
MATERIAL
equal plain junction as per IS 15905 75x75x75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
10.79
Rate
225.00
1.73
Amount
225.00
18.67
243.67
2.44
246.11
36.92
283.03
283.05
17.45
Providing and fixing double unequal junction of required degree with access
door, insertion rubber washer 3 mm thick, bolts and nuts complete:
17.45.1
100x100x75x75 mm

Code
1662
1374
9988
Description
MATERIAL
Sand cast iron S&S double unequal
junctions: 100x100x75x75 mm dia with
access door.
TOTAL
TOTAL
Cost of each
Say
1125
Unit
Quantity
each
each
L.S.
1.00
1.00
13.52
Rate
550.00
18.00
1.73
Amount
550.00
18.00
23.39
591.39
5.91
597.30
89.60
686.90
686.90

Code
3674
1374
9988
Description
MATERIAL
S.C.I. S&S double unequal junctions with
access door 100x100x75x75 mm
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
each
L.S.
1.00
1.00
13.52
Rate
850.00
18.00
1.73
Amount
850.00
18.00
23.39
891.39
8.91
900.30
135.05
1035.35
1035.35
17.46
Providing and fixing double unequal plain junction of required degree :
17.46.1
100x100x75x75 mm

Code
1659
9988
Description
MATERIAL
Sand cast iron S&S plain double unequal
junctions : 100x100x75x75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
13.52
Rate
550.00
1.73
Amount
550.00
23.39
573.39
5.73
579.12
86.87
665.99
666.00

Code
3670
9988
Description
MATERIAL
S.C.I. S&S double unequal junctions
100x100x75x75 mm
TOTAL
TOTAL
Cost of each
Say
1126
Rate
800.00
1.73
Amount
800.00
23.39
823.39
8.23
831.62
124.74
956.36
956.35
17.46.1.3
Code
7629
9977
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per
IS:15905
Description
MATERIAL
double unequal plain junction as per IS
15905 - 100x100x75x75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Rate
421.00
1.73
Amount
421.00
23.39
444.39
4.44
448.83
67.32
516.15
516.15
17.47
Providing and fixing single unequal junction of required degree with access
door, insertion rubber washer 3 mm thick, bolts and nuts complete :
17.47.1
100x100x75 mm
17.47.1.1
Sand cast iron S&S as per IS - 1729
Code
1656
1374
9988
17.47.1.2
Code
3664
1374
9988
Description
MATERIAL
Sand cast iron S&S single unequal
junctions: 100x100x75 mm dia with access
door.
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
each
L.S.
1.00
1.00
13.52
Unit
Quantity
each
each
L.S.
1.00
1.00
13.52
Rate
400.00
18.00
1.73
Amount
400.00
18.00
23.39
441.39
4.41
445.80
66.87
512.67
512.65

Description
MATERIAL
S.C.I. S&S single unequal junctions with
TOTAL
TOTAL
Cost of each
Say
1127
Rate
640.00
18.00
1.73
Amount
640.00
18.00
23.39
681.39
6.81
688.20
103.23
791.43
791.45
17.48
Providing and fixing single unequal plain junction of required degree :
17.48.1
100x100x75 mm
17.48.1.1
Code
1653
9988
17.48.1.2
Code
3660
9988
17.48.1.3
Code
7630
9977
Description
MATERIAL
Sand cast iron S&S plain single unequal
junctions : 100x100x75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
13.52
Rate
370.00
1.73
Amount
370.00
23.39
393.39
3.93
397.32
59.60
456.92
456.90

Description
MATERIAL
S.C.I. S&S single unequal junctions
100x100x75 mm
TOTAL
TOTAL
Cost of each
Say
Rate
570.00
1.73
Amount
570.00
23.39
593.39
5.93
599.32
89.90
689.22
689.20
IS:15905
Description
MATERIAL
unequal plain junction as per IS 15905 100x100x75 mm dia
TOTAL
TOTAL
Cost of each
Say
1128
Unit
Quantity
each
L.S.
1.00
13.52
Rate
392.00
1.73
Amount
392.00
23.39
415.39
4.15
419.54
62.93
482.47
482.45
17.49
Providing and fixing double equal plain invert branch of required degree:
17.49.1
100x100x100x100 mm
17.49.1.1
Code
1673
9988
17.49.1.2
Code
3685
9988
17.49.1.3
Code
7631
9977
Description
MATERIAL
S.C.I. double equal invert branch of required
degree 100x100x100x100 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
13.52
Rate
550.00
1.73
Amount
550.00
23.39
573.39
5.73
579.12
86.87
665.99
666.00
Sand cast iron S&S as per IS 3989

Description
MATERIAL
S.C.I. S&S double equal invert branch of
required degree100x100x100x100 mm dia
TOTAL
TOTAL
Cost of each
Say
Rate
530.00
1.73
Amount
530.00
23.39
553.39
5.53
558.92
83.84
642.76
642.75
IS:15905
Description
MATERIAL
double equal plain invert branch as per IS
15905 - 100x100x100x100 mm dia
TOTAL
TOTAL
Cost of each
Say
1129
Unit
Quantity
each
L.S.
1.00
13.52
Rate
653.00
1.73
Amount
653.00
23.39
676.39
6.76
683.15
102.47
785.62
785.60
17.49.2
75x75x75x75 mm
17.49.2.1
Code
1672
9988
17.49.2.2
Code
3686
9988
Description
MATERIAL
S.C.I. double equal invert branch of
required degree 75x75x75x75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
10.79
Unit
Quantity
each
L.S.
1.00
10.79
Rate
410.00
1.73
Amount
410.00
18.67
428.67
4.29
432.96
64.94
497.90
497.90

Description
MATERIAL
S.C.I. S&S double equal invert branch of
TOTAL
TOTAL
Cost of each
Say
Rate
425.00
1.73
Amount
425.00
18.67
443.67
4.44
448.11
67.22
515.33
515.35
17.50
Providing and fixing single equal plain invert branch of required degree :
17.50.1
100x100x100 mm
17.50.1.1
Sand cast iron S&S as per iron 1729
Code
1670
9988
Description
MATERIAL
S.C.I. single equal invert branch of required
degree 100x100x100 mm dia
TOTAL
TOTAL
Cost of each
Say
1130
Unit
Quantity
each
L.S.
1.00
13.52
Rate
410.00
1.73
Amount
410.00
23.39
433.39
4.33
437.72
65.66
503.38
503.40
17.50.1.2
Code
3681
9988
17.50.1.3
Code
7632
9977

Description
MATERIAL
S.C.I. S&S single equal invert branch of
required degree 100x100x100 mm dia
TOTAL
TOTAL
Cost of each
Say
Description
MATERIAL
equal plain invert branch as per IS 15905 100x100x100 mm dia
TOTAL
TOTAL
Cost of each
Say
75x75x75 mm
17.50.2.1
1669
9988
Quantity
each
L.S.
1.00
13.52
Rate
425.00
1.73
Amount
425.00
23.39
448.39
4.48
452.87
67.93
520.80
520.80
IS:15905
17.50.2
Code
Unit
Description
MATERIAL
S.C.I. single equal invert branch of required
degree75x75x75 mm dia
TOTAL
TOTAL
Cost of each
Say
1131
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
10.79
Rate
410.00
1.73
Rate
320.00
1.73
Amount
410.00
23.39
433.39
4.33
437.72
65.66
503.38
503.40
Amount
320.00
18.67
338.67
3.39
342.06
51.31
393.37
393.35
17.50.2.2
Code
3682
9988
17.50.2.3
Code
7633
9977

Description
MATERIAL
S.C.I. S&S single equal invert branch of
required degree 75x75x75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
10.79
Rate
Amount
323.00
1.73
323.00
18.67
341.67
3.42
345.09
51.76
396.85
396.85
IS:15905
Description
MATERIAL
equal plain invert branch as per IS 15905 75x75x75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
10.79
Rate
Amount
270.00
1.73
270.00
18.67
288.67
2.89
291.56
43.73
335.29
335.30
17.51
Providing and fixing double unequal invert branch of required degree :
17.51.1
100x100x75x75 mm
17.51.1.1
Code
1677
9988
Description
MATERIAL
S.C.I. double unequal invert branch of
TOTAL
TOTAL
Cost of each
Say
1132
Unit
Quantity
each
L.S.
1.00
13.52
Rate
570.00
1.73
Amount
570.00
23.39
593.39
5.93
599.32
89.90
689.22
689.20
17.51.1.2
Code
3695
9988

Description
MATERIAL
S.C.I. S&S double unequal invert branch of
required degree100x100x75x75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Rate
725.00
1.73
Amount
725.00
23.39
748.39
7.48
755.87
113.38
869.25
869.25
17.52
Providing and fixing single unequal plain invert branch of required degree :
17.52.1
100x100x75 mm
17.52.1.1
Code
1674
9988
17.52.1.2
Code
3690
9988
Description
MATERIAL
S.C.I. single unequal invert branch of
required degree100x100x75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
13.52
Rate
495.00
1.73
Amount
495.00
23.39
518.39
5.18
523.57
78.54
602.11
602.10

Description
MATERIAL
S.C.I. S&S single unequal invert branch of
required degree100x100x75 mm dia
TOTAL
TOTAL
Cost of each
Say
1133
Rate
545.00
1.73
Amount
545.00
23.39
568.39
5.68
574.07
86.11
660.18
660.20
17.52.1.3
Code
7634
9977
IS:15905
Description
MATERIAL
unequal plain invert branch 45 degree as
per IS 15905 - 100x100x75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Rate
450.00
1.73
17.53
Providing and fixing sand cast iron S&S off sets as per IS: 1729
17.53.1
76 mm off sets
17.53.1.1
With 75 mm dia pipe
Code
3746
9988
17.53.1.2
Code
3747
9988
Description
MATERIAL
S.C.I. S&S, 75 mm offset for 75 mm
dia pipe
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
10.79
Unit
Quantity
each
L.S.
1.00
10.79
Rate
218.00
1.73
Amount
450.00
23.39
473.39
4.73
478.12
71.72
549.84
549.85
Amount
218.00
18.67
236.67
2.37
239.04
35.86
274.90
274.90
With 100 mm dia pipe

Description
MATERIAL
S.C.I. S&S, 75 mm offset for 100 mm
dia pipe
TOTAL
TOTAL
Cost of each
Say
1134
Rate
363.00
1.73
Amount
363.00
18.67
381.67
3.82
385.49
57.82
443.31
443.30
17.53.2
114 mm off sets
17.53.2.1
With 75 mm dia pipe
Code
3712
9988
17.53.2.2
Code
3713
9988
Description
MATERIAL
S.C.I. S&S, 114 mm offset for75 mm
dia pipe
TOTAL
TOTAL
Cost of each
Say
Description
MATERIAL
dia pipe
TOTAL
TOTAL
Cost of each
Say
152 mm off sets
17.53.3.1
With 75 mm dia pipe
3716
9988
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
17.94
Rate
300.00
1.73
Amount
300.00
23.39
323.39
3.23
326.62
48.99
375.61
375.60
17.53.3
Code
Unit
Description
MATERIAL
dia pipe
TOTAL
TOTAL
Cost of each
Say
1135
Rate
383.00
1.73
Rate
358.00
1.73
Amount
383.00
23.39
406.39
4.06
410.45
61.57
472.02
472.00
Amount
358.00
31.04
389.04
3.89
392.93
58.94
451.87
451.85
17.53.3.2
Code
3717
9988

Description
MATERIAL
dia pipe
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
17.94
Rate
455.00
1.73
Amount
455.00
31.04
486.04
4.86
490.90
73.64
564.54
564.55
17.53A
Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside
& outside as per IS:15905
17.53A.1
65 mm offsets
17.53A.1.1 With 100 mm dia pipe

Code
7635
9977
Description
MATERIAL
Hubless centrifugally cast (spun) iron 65
mm offset with 100 mm dia pipe as per
IS 15905
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
10.79
Unit
Quantity
each
L.S.
1.00
10.79
Rate
378.00
1.73
Amount
378.00
18.67
396.67
3.97
400.64
60.10
460.74
460.75
17.53A.1.2 With 75 mm dia pipe

Code
7636
9977
Description
MATERIAL
mm offset with 75 mm dia pipe as per
IS 15905
TOTAL
TOTAL
Cost of each
Say
Rate
308.00
1.73
17.54
Providing and fixing sand cast iron S&S off sets as per IS: 3989 :
17.54.1
75 mm off sets
1136
Amount
308.00
18.67
326.67
3.27
329.94
49.49
379.43
379.45
17.54.1.1
Code
3699
9988
With 75 mm dia pipe

Description
MATERIAL
S.C.I. S&S, 75 mm offset for75 mm dia pipe
TOTAL
TOTAL
Cost of each
Say
17.54.2
150 mm off sets
17.54.2.1
With 75 mm dia pipe
Code
3707
9988
17.54.2.2
Code
3708
9988
Description
MATERIAL
S.C.I. S&S, 150 mm offset for75 mm dia pipe
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
10.79
Unit
Quantity
each
L.S.
1.00
16.12
Unit
Quantity
each
L.S.
1.00
16.12
Rate
225.00
1.73
Rate
285.00
1.73
Amount
225.00
18.67
243.67
2.44
246.11
36.92
283.03
283.05
Amount
285.00
27.89
312.89
3.13
316.02
47.40
363.42
363.40

Description
MATERIAL
S.C.I. S&S, 150 mm offset for 100 mm dia pipe
TOTAL
TOTAL
Cost of each
Say
Rate
390.00
1.73
Amount
390.00
27.89
417.89
4.18
422.07
63.31
485.38
485.40
17.54A
Providing and fixing Hubless centrifugally cast iron offsets epoxy coated inside
& outside as per IS:15905
17.54A.1
130 mm offsets
17.54A.1.1 With 100 mm dia

Code
7637
Description
MATERIAL
mm offset with 100 mm dia pipe as per IS 15905
1137
Unit
Quantity
each
1.00
Rate
457.00
Amount
457.00
Code
Description
Unit
Quantity
9977

TOTAL
TOTAL
Cost of each
Say
L.S.
13.52
Unit
Quantity
each
L.S.
1.00
10.79
Rate
1.73
Amount
23.39
480.39
4.80
485.19
72.78
557.97
557.95
17.54A.1.2 With 75 mm dia

Code
7638
9999
17.55
17.55.1
17.55.1.1
Code
1683
1374
9988
17.55.1.2
Code
3728
1374
9988
Description
MATERIAL
Hubless centrifugally cast (spun) iron 130 mm
offset with 75 mm dia pipe as per IS 15905
TOTAL
TOTAL
Cost of each
Say
Rate
325.00
1.73
Amount
325.00
18.67
343.67
3.44
347.11
52.07
399.18
399.20
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts &
nuts complete :
100 mm
Description
MATERIAL
S.C.I. door pieces 100 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
each
L.S.
1.00
1.00
13.52
Unit
Quantity
each
each
L.S.
1.00
1.00
13.52
Rate
400.00
18.00
1.73
Amount
400.00
18.00
23.39
441.39
4.41
445.80
66.87
512.67
512.65

Description
MATERIAL
S.C.I. S&S door pieces 100 mm dia
TOTAL
TOTAL
Cost of each
Say
1138
Rate
400.00
18.00
1.73
Amount
400.00
18.00
23.39
441.39
4.41
445.80
66.87
512.67
512.65
17.55.2
17.55.2.1
Code
1682
1373
9988
17.55.2.2
Code
3729
1373
9988
17.56
17.56.1
17.56.1.1
Code
1640
9988
17.56.1.2
Code
3733
75 mm
Description
MATERIAL
S.C.I. door pieces 75 mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
each
L.S.
1.00
1.00
10.79
Unit
Quantity
each
each
L.S.
1.00
1.00
10.79
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
1.00
Rate
275.00
15.00
1.73
Amount
275.00
15.00
18.67
308.67
3.09
311.76
46.76
358.52
358.50

Description
MATERIAL
S.C.I. S&S door pieces 75 mm dia
TOTAL
TOTAL
Cost of each
Say
Rate
295.00
15.00
1.73
Amount
295.00
15.00
18.67
328.67
3.29
331.96
49.79
381.75
381.75
Providing and fixing terminal guard :

100 mm
Description
MATERIAL
Slotted cowl (terminal guard ) 100 mm dia
TOTAL
TOTAL
Cost of each
Say
Rate
190.00
1.73
Amount
190.00
23.39
213.39
2.13
215.52
32.33
247.85
247.85

Description
MATERIAL
S.C.I. S&S, Slotted Cowl (Terminal Guard)
100 mm
1139
Rate
264.00
Amount
264.00
Code
Description
Unit
Quantity
9988

TOTAL
TOTAL
Cost of each
Say
L.S.
13.52
17.56.1.3
Code
7641
9977
17.56.2
17.56.2.1
Code
1639
9988
17.56.2.2
Code
3734
9988
Rate
1.73
Amount
23.39
287.39
2.87
290.26
43.54
333.80
333.80
IS:15905
Description
MATERIAL
terminal guard (slotted cowl) - 100 mm dia
as per IS 15905
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
10.79
Unit
Quantity
each
L.S.
1.00
10.79
Rate
283.00
1.73
Amount
283.00
23.39
306.39
3.06
309.45
46.42
355.87
355.85
75 mm
Description
MATERIAL
Slotted cowl (terminal guard )75 mm dia
TOTAL
TOTAL
Cost of each
Say
Rate
151.00
1.73
Amount
151.00
18.67
169.67
1.70
171.37
25.71
197.08
197.10

Description
MATERIAL
S.C.I. S&S, Slotted Cowl (Terminal Guard)
75 mm
TOTAL
TOTAL
Cost of each
Say
1140
Rate
210.00
1.73
Amount
210.00
18.67
228.67
2.29
230.96
34.64
265.60
265.60
17.57
Providing and fixing collar :
17.57.1
100 mm
17.57.1.1
Code
1686
9988
17.57.1.2
Code
3738
9988
Description
MATERIAL
S.C.I. collar 100 mm dia
TOTAL
TOTAL
Cost of each
Say
Description
MATERIAL
S.C.I. S&S, collars 100 mm
TOTAL
TOTAL
Cost of each
Say
75 mm
17.57.2.1
1685
9988
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
10.79
Rate
138.00
1.73
Amount
138.00
23.39
161.39
1.61
163.00
24.45
187.45
187.45
17.57.2
Code
Unit
Description
MATERIAL
S.C.I. collar 75 mm dia
TOTAL
TOTAL
Cost of each
Say
1141
Rate
279.00
1.73
Rate
92.00
1.73
Amount
279.00
23.39
302.39
3.02
305.41
45.81
351.22
351.20
Amount
92.00
18.67
110.67
1.11
111.78
16.77
128.55
128.55
17.57.2.2
Code
3739
9988

Description
MATERIAL
S.C.I. S&S, collars 75 mm
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
10.79
Rate
170.00
1.73
Amount
170.00
18.67
188.67
1.89
190.56
28.58
219.14
219.15
17.57A
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe
17.57A.1
100 mm dia
17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket

Code
7644
9977
17.57A.2
Description
MATERIAL
SS 304 grade shielded coupling with EPDM
rubber gasket for 100 mm dia Hubless
centrifugally cast (spun) iron
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Rate
287.00
1.73
Amount
287.00
23.39
310.39
3.10
313.49
47.02
360.51
360.50
75 mm dia
17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket

Code
7645
9977
Description
MATERIAL
SS 304 grade shielded coupling with EPDM
rubber gasket for 75 mm dia Hubless
centrifugally cast (spun) iron
TOTAL
TOTAL
Cost of each
Say
1142
Unit
Quantity
each
L.S.
1.00
10.79
Rate
262.00
1.73
Amount
262.00
18.67
280.67
2.81
283.48
42.52
326.00
326.00
17.58
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron
pipes and fittings of diameter :
17.58.1
100 mm
Code
Description
1397
1881
9999
9977
0116
0117
0114
Details of cost for one joint

MATERIAL
Pig lead
Spun yarn
Kerosene oil, fuel and other sundries
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
17.58.2
75 mm
Code
Description
1397
1881
9999
9977
0116
0117
0114

MATERIAL
Pig lead
Spun yarn
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
17.58.3
50 mm
Code
Description
1397
1881
9999
9977

MATERIAL
Pig lead
Spun yarn
1143
Unit
Quantity
Rate
kilogram
kilogram
L.S.
L.S.
0.98
0.11
13.52
1.43
138.00
50.00
1.73
1.73
135.24
5.50
23.39
2.47
day
day
day
0.06
0.06
0.12
487.00
448.00
368.00
29.22
26.88
44.16
266.86
2.67
269.53
40.43
309.96
309.95
Unit
Quantity
kilogram
kilogram
L.S.
L.S.
0.88
0.09
10.79
1.43
138.00
50.00
1.73
1.73
121.44
4.50
18.67
2.47
day
day
day
0.05
0.05
0.09
487.00
448.00
368.00
24.35
22.40
33.12
226.95
2.27
229.22
34.38
263.60
263.60
Unit
Quantity
kilogram
kilogram
L.S.
L.S.
0.77
0.06
6.76
1.43
Rate
Rate
138.00
50.00
1.73
1.73
Amount
Amount
Amount
106.26
3.00
11.69
2.47
Code
0116
0117
0114
Description
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
day
day
day
0.04
0.05
0.05
Rate
487.00
448.00
368.00
Amount
19.48
22.40
18.40
183.70
1.84
185.54
27.83
213.37
213.35
17.59
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally
cast (spun) iron pipes of diameter :
17.59.1
100 mm
Code
Description
1330
9988

MATERIAL
Clamps and M.S. stays including bolts and
nuts for 100 mm pipe
TOTAL
TOTAL
Cost of each
Say
17.59.2
75 mm
Code
Description
1335
9988

MATERIAL
nuts for 75 mm pipe
TOTAL
TOTAL
Cost of each
Say
17.59.3
50 mm
Code
Description
1334

MATERIAL
nuts for 50 mm pipe
1144
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
10.79
Unit
Quantity
each
1.00
Rate
30.00
1.73
Rate
30.00
1.73
Rate
28.00
Amount
30.00
23.39
53.39
0.53
53.92
8.09
62.01
62.00
Amount
30.00
18.67
48.67
0.49
49.16
7.37
56.53
56.55
Amount
28.00
Code
Description
Unit
Quantity
9988

TOTAL
TOTAL
Cost of each
Say
L.S.
9.49
Rate
1.73
Amount
16.42
44.42
0.44
44.86
6.73
51.59
51.60
17.60
Providing and fixing trap of self cleansing design with screwed down or hinged
grating with or without vent arm complete, including cost of cutting and making
good the walls and floors :
17.60.1
100 mm inlet and 100 mm outlet
17.60.1.1
Sand cast iron S&S as per IS: 3989
Code
7808
9999
9977
0123
0114
17.60.1.2
Code
1897
9999
9977
0123
0114
Description
MATERIAL
Centrifugally cast (spun) iron S&S 100 mm
inlet and 100 mm outlet
LABOUR
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
L.S.
L.S.
1.00
13.52
2.73
435.00
1.73
1.73
435.00
23.39
4.72
day
day
0.50
0.50
487.00
368.00
243.50
184.00
890.61
8.91
899.52
134.93
1034.45
1034.45
Unit
Quantity
each
L.S.
L.S.
1.00
13.52
2.73
275.00
1.73
1.73
275.00
23.39
4.72
day
day
0.50
0.50
487.00
368.00
243.50
184.00
730.61
7.31
737.92
110.69
848.61
848.60
Sand Cast Iron S&S as per IS: 1729

Description
MATERIAL
100 mm S.C.I. trap with 100 mm inlet and
100 mm outlet
LABOUR
Beldar
TOTAL
TOTAL
Cost of each
Say
1145
Rate
Amount
17.60.1.3
Code
7642
9977
IS:15905
Description
MATERIAL
Hubless centrifugally cast (spun) iron trap
with 100 mm inlet and 100 mm outlet as
per IS 15905
TOTAL
TOTAL
Cost of each
Say
17.60.2
100 mm inlet and 75 mm outlet
17.60.2.1
Code
7809
9999
9977
0123
0114
17.60.2.2
Code
1898
9999
9977
0123
Description
MATERIAL
Centrifugally cast (spun) iron S&S 100 mm
inlet and 75 mm outlet
LABOUR
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
L.S.
1.00
13.52
2.73
468.00
1.73
1.73
468.00
23.39
4.72
day
day
0.50
0.50
487.00
368.00
243.50
184.00
923.61
9.24
932.85
139.93
1072.78
1072.80
Unit
Quantity
each
L.S.
L.S.
1.00
13.52
2.73
218.00
1.73
1.73
218.00
23.39
4.72
day
0.50
487.00
243.50
560.00
1.73
Rate
Amount
560.00
23.39
583.39
5.83
589.22
88.38
677.60
677.60
Amount
Sand Cast Iron S&S as per IS- 1729

Description
MATERIAL
100 mm S.C.I. trap with 100 mm inlet
and 75 mm outlet
LABOUR
1146
Rate
Amount
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of each
Say
day
0.50
17.60.2.3
Code
7643
9977
Rate
368.00
Amount
184.00
673.61
6.74
680.35
102.05
782.40
782.40
IS:15905
Description
MATERIAL
Hubless centrifugally cast (spun) iron trap
with 100 mm inlet and 75 mm outlet as per
IS 15905
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
13.52
Rate
404.00
1.73
Amount
404.00
23.39
427.39
4.27
431.66
64.75
496.41
496.40
17.61
Cutting chases in brick masonry walls for following diameter sand cast iron/
centrifugally cast (spun) iron pipes and making good the same with cement
concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm
nominal size), including necessary plaster and pointing in cement mortar 1:4 (1
cement : 4 coarse sand) :
17.61.1
100 mm dia
Code
4.2.5
9999
9977
0123
Description
Details of cost for one metre
MATERIAL
Cement concrete 1:3:6 (1 cement :
3 coarse sand :6 graded stone aggregate )
work
Plastering in cement mortar 1:4
LABOUR
1147
Unit
Quantity
Rate
Amount
cum
L.S.
L.S.
0.02
10.40
4.16
5992.75
1.73
1.73
131.84(A)
17.99
7.20
day
0.14
487.00
68.18
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
i.e. on (324.57 - 131.84) = 192.73
TOTAL
= 194.66
Cost of one metre
Say
day
0.27
17.61.2
Code
4.2.5
9999
9977
0123
0114
17.61.3
Code
4.2.5
9999
9977
0123
Rate
368.00
Amount
99.36
324.57
1.93
326.50
29.20
355.70
355.70
75 mm dia
Description
MATERIAL
work
LABOUR
Beldar
TOTAL
i.e. on (231.75 - 89.89) = 141.86
TOTAL
= 143.28
Cost of one metre
Say
Unit
Quantity
Rate
Amount
cum
L.S.
L.S.
0.02
7.80
3.51
5992.75
1.73
1.73
89.89(A)
13.49
6.07
day
day
0.10
0.20
487.00
368.00
48.70
73.60
231.75
1.42
233.17
21.49
254.66
254.65
50 mm dia
Description
MATERIAL
work
LABOUR
1148
Unit
Quantity
Rate
Amount
cum
L.S.
L.S.
0.01
5.20
2.73
5992.75
1.73
1.73
47.94(A)
9.00
4.72
day
0.07
487.00
34.09
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
i.e. on (147.27 - 47.94) = 99.33
TOTAL
= 100.32
Cost of one metre
Say
day
0.14
17.62
Code
0828
4202
0834
9977
9999
0131
0114
17.63
Code
0828
0834
9999
9988
Rate
368.00
Amount
51.52
147.27
0.99
148.26
15.05
163.31
163.30
Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and
white paint over a coat of zinc chromate yellow primer (of approved quality ) on
the outside surface of the cistern, flush pipe, other fittings, etc. complete for
new work.
Description
Details of cost for one cistern with fittings
MATERIAL
Sundries
LABOUR
Painter
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
litre
litre
0.23
0.20
100.00
65.00
23.00
13.00
litre
L.S.
L.S.
0.40
1.43
6.76
150.00
1.73
1.73
60.00
2.47
11.69
day
day
0.25
0.50
448.00
368.00
112.00
184.00
406.16
4.06
410.22
61.53
471.75
471.75
Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside
and white paint on the outside surface of the cistern, flush pipe, other fittings,
etc. complete, including polishing of wooden seat and lid and cleaning of W.C.
pan with acid wherever necessary.
Description
MATERIAL
Polishing of wooden seat and cleaning of
W.C. pan with acid
Sundries and carriage of materials
1149
Unit
Quantity
Rate
Amount
litre
0.23
100.00
23.00
litre
0.20
150.00
30.00
L.S.
L.S.
20.67
7.15
1.73
1.73
35.76
12.37
Code
0131
0114
17.64
Code
0834
9988
0131
0114
Description
LABOUR
Painter
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
day
day
0.20
0.25
Rate
448.00
368.00
Amount
89.60
92.00
282.73
2.83
285.56
42.83
328.39
328.40
Repainting C.I. cistern with synthetic enamel paint of approved colour, brand
and manufacture on the outside surface of cistern, flush pipe, other fittings etc.
complete.
Description
MATERIAL
Sundries and carriage of materials
LABOUR
Painter
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
litre
L.S.
0.20
3.64
150.00
1.73
30.00
6.30
day
day
0.09
0.12
448.00
368.00
40.32
44.16
120.78
1.21
121.99
18.30
140.29
140.30
17.65
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and
fittings with two coats of synthetic enamel paint of any colour such as chocolate
grey, or buff etc. over a coat of primer (of approved quality) for new work :
17.65.1
100 mm diameter pipe
Code
13.50.3
13.61.1
Description
MATERIAL
Perimeter = 3.14x110 mm =345.71
Area 10x0.3457 = 3.46 sqm
Priming coat
Painting two coats with paint of any colour
such as chocolatem grey or buff etc.
1150
Unit
Quantity
Rate
Amount
sqm
3.46
29.10
100.69(A)
sqm
3.46
78.40
271.26(A)
Code
Description
Unit
Quantity
9999
Add for delay

TOTAL
i.e. on (401.64 - 371.95) = 29.69
TOTAL
= 29.99
Cost of 10 metres
Cost of 1 metre
Say
L.S.
17.16
17.65.2
Code
13.50.3
13.61.1
9999
Rate
1.73
Amount
29.69
401.64
0.30
401.94
4.50
406.44
40.64
40.65
75 mm diameter pipe
Description
MATERIAL
Perimeter = 3.14x82 mm =257.71
Area 10x0.2577 =2.577 sqm say 2.60 sq. m
for outer surface
Priming coat
Painting two coats with paint of any colour
such as choclate grey or buff etc.
Add for delay
TOTAL
i.e. on (305.81 - 279.50) = 26.31
TOTAL
= 26.57
Cost of 10 metres
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
sqm
2.60
29.10
75.66(A)
sqm
L.S.
2.60
15.21
78.40
1.73
203.84(A)
26.31
305.81
0.26
306.07
3.99
310.06
31.00
31.00
17.66
Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent
pipes and fittings with one coat of synthetic enamel paint of any colour such as
chocolate, grey or buff etc :
17.66.1
Code
14.54.1
Description
Unit
Quantity

Painting one coat with paint of any colour
such as chocolate,grey or buff etc.
(Rate as per item no 14.54.1 of S.H. Repair
to Building)
sqm
3.46
1151
Rate
51.30
Amount
177.50(A)
Code
Description
Unit
Quantity
9999
Add for delay

TOTAL
i.e. on (198.64 - 177.50) = 21.14
TOTAL
= 21.35
Cost of 10 metres
Cost of 1 metre
Say
L.S.
12.22
17.66.2
Code
14.54.1
9999
17.67
Code
0830
9999
0131
0115
Rate
1.73
Amount
21.14
198.64
0.21
198.85
3.20
202.05
20.20
20.20
75 mm diameter pipe
Description
Painting one coat with paint of any colour
such as chocolate,grey or buff etc.
to Building)
Add for delay
TOTAL
i.e. on (148.62 - 132.20) = 16.42
TOTAL
= 16.58
Cost of 10 metres
Cost of 1 metre
Say
Unit
Quantity
sqm
L.S.
2.58
9.49
Rate
51.30
1.73
Amount
132.20(A)
16.42
148.62
0.16
148.78
2.49
151.27
15.12
15.10
Repainting bath tub of size 1700x730x430 mm with enamel paint.

Description
Details of cost for one tub
MATERIAL
Enamel paint
Sundries
LABOUR
Painter
Coolie
TOTAL
TOTAL
Cost of each
Say
1152
Unit
Quantity
Rate
Amount
litre
L.S.
0.90
6.76
155.00
1.73
139.50
11.69
day
day
0.25
0.25
448.00
368.00
112.00
92.00
355.19
3.55
358.74
53.81
412.55
412.55
17.68
Providing and fixing vitreous china dual purpose closet suitable for use as
squatting pan or European type water closet (Anglo Indian W.C pan) with seat
& lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing
cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with
specials of standard make and mosquito proof coupling of approved municipal
design complete, including painting of fittings and brackets, cutting and making
good the walls and floors wherever required:
17.68.1
White vitreous china dual purpose WC pan with white solid plastic seat and lid
with white vitreous china flushing cistern and C.P. flush bend.
Code
1875
1965
7006
9999
1350
9999
9999
9999
9977
0116
0123
0114
Description
MATERIAL
White vitreous china dual purpose closet
(Anglo Indian W.C.) suitable for use as
sequatting pan or European type water
closet as per manufacturer's specifications
with fittings
20 mm G.I.over flow pipe and specials for
over flow pipe
Plugs, screws etc.
Red lead, white lead and gaskin etc.
Cement,sand and grit
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
1.00
330.00
330.00
each
1.00
1300.00
1300.00
each
1.00
1300.00
1300.00
L.S.
each
L.S.
L.S.
L.S.
L.S.
276.25
1.00
59.15
71.76
118.43
118.43
1.73
30.00
1.73
1.73
1.73
1.73
477.91
30.00
102.33
124.14
204.88
204.88
day
day
day
1.00
1.00
1.00
487.00
487.00
368.00
487.00
487.00
368.00
5416.14
54.16
5470.30
820.55
6290.85
6290.85
17.69
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved
quality and colour.
17.69.1
Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not

less than 45 gms
Code
Description
7491

MATERIAL
PTMT Waste Coupling 31/32MM
1153
Unit
Quantity
each
1.00
Rate
36.00
Amount
36.00
Code
Description
Unit
Quantity
9988

TOTAL
TOTAL
Cost of each
Say
L.S.
20.28
17.69.2
Code
7492
9988
Rate
1.73
Amount
35.08
71.08
0.71
71.79
10.77
82.56
82.55
Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not

less than 60 gms
Description
MATERIAL
PTMT Waste Coupling 38/40MM
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
20.28
Rate
50.00
1.73
Amount
50.00
35.08
85.08
0.85
85.93
12.89
98.82
98.80
17.70
Providing and fixing PTMT Bottle Trap for Wash basin and sink.
17.70.1
Bottle trap 31mm single piece moulded with height of 270 mm, effective length
of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with
25 mm minimum water seal, weighing not less than 260 gms
Code
7493
9988
17.70.2
Description
MATERIAL
PTMT Bottle Trap 31/32MM
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
20.28
Rate
218.00
1.73
Amount
218.00
35.08
253.08
2.53
255.61
38.34
293.95
293.95
Bottle trap 38 mm single piece moulded with height of 270 mm, effective length
of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with
25 mm minimum water seal, weighing not less than 263 gms
Code
Description
7494

MATERIAL
PTMT Bottle Trap 38/40MM
1154
Unit
Quantity
each
1.00
Rate
228.00
Amount
228.00
Code
Description
Unit
Quantity
9988

TOTAL
TOTAL
Cost of each
Say
L.S.
20.28
17.71
Code
7503
9988
17.72
Code
7504
9988
17.73
17.73.1
Code
7505
9.32
0588
Rate
1.73
Amount
35.08
263.08
2.63
265.71
39.86
305.57
305.55
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and
112 mm distance from wall of standard shape with bracket of the same materials
with snap fittings of approved quality and colour, weighing not less than 105 gms.
Description
MATERIAL
PTMT Liquid Soap Container of 400ml
capacity
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
6.76
Rate
107.00
1.73
Amount
107.00
11.69
118.69
1.19
119.88
17.98
137.86
137.85
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm
wide with minimum distances of 37 mm from wall face with concealed fittings
arrangement of approved quality and colour, weighing not less than 88 gms.
Description
MATERIAL
PTMT - Towel Ring 215x200x37mm
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
20.28
Rate
135.00
1.73
Amount
135.00
35.08
170.08
1.70
171.78
25.77
197.55
197.55
Providing and fixing PTMT towel rail complete with brackets fixed to wooden
cleats with CP brass screws with concealed fittings arrangement of approved
quality and colour.
450 mm long towel rail with total length of 495 mm, 78 mm wide and effective
height of 88 mm, weighing not less than 170 gms
Description
MATERIAL
PTMT Towel Rail (450mm)
Wooden cleates
PVC work
1155
Unit
Quantity
Rate
Amount
each
1.00
141.00
141.00
each
100 Nos
2.00
6.00
21.85
190.00
43.70(A)
11.40
Code
Description
Unit
Quantity
9977
LABOUR
Carpenter 2nd class
Beldar
TOTAL
i.e. on (342.02 - 43.70) = 298.32
TOTAL
= 301.30
Cost of each
Say
L.S.
4.16
1.73
7.20
day
day
0.17
0.17
448.00
368.00
76.16
62.56
342.02
0112
0114
17.73.2
Code
7506
9.32
0588
9977
0112
0114
17.74
Code
7507
9.32
0588
9977
0112
Rate
Amount
2.98
345.00
45.20
390.20
390.20
600 mm long towel rail with total length of 645 mm, width 78 mm and effective
height of 88 mm, weighing not less than 190 gms.
Description
MATERIAL
PTMT Towel Rail (600mm)
Wooden cleates
PVC work
LABOUR
Carpenter 2nd class
Beldar
TOTAL
i.e. on (370.02 - 43.70) = 326.32
TOTAL
= 329.58
Cost of each
Say
Unit
Quantity
Rate
Amount
each
1.00
169.00
169.00
each
100 Nos
L.S.
2.00
6.00
4.16
21.85
190.00
1.73
43.70(A)
11.40
7.20
day
day
0.17
0.17
448.00
368.00
76.16
62.56
370.02
3.26
373.28
49.44
422.72
422.70
Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height
of approved quality and colour, weighing not less than 300 gms.
Description
MATERIAL
PTMT Shelf 450x124x36mm
Wooden cleates
PVC work
LABOUR
Carpenter 2nd class
1156
Unit
Quantity
Rate
Amount
each
1.00
210.00
210.00
each
100 Nos
L.S.
2.00
6.00
4.16
21.85
190.00
1.73
43.70(A)
11.40
7.20
day
0.17
448.00
76.16
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
i.e. on (411.02 - 43.70) = 367.32
TOTAL
= 370.99
Cost of each
Say
day
0.17
17.75
Code
7508
9988
17.76
17.76.1
Code
7858
9988
17.77
Rate
368.00
Amount
62.56
411.02
3.67
414.69
55.65
470.34
470.35
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2"
BSP thread and shapes, weighing not less than 60 gms.
Description
MATERIAL
PTMT Urinal Spreader 15mm
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
6.76
Rate
80.00
1.73
Amount
80.00
11.69
91.69
0.92
92.61
13.89
106.50
106.50
Providing and fixing PTMT urinal cock of approved quality and colour.
15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female
threads weighing not less than 48 gms
Description
MATERIAL
P.T.M.T. Urinal cock 15mm dia
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
each
L.S.
1.00
8.06
Rate
110.00
1.73
Amount
110.00
13.94
123.94
1.24
125.18
18.78
143.96
143.95
Providing and fixing M.S. holder bat clamp of approved design to sand cast
iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm
flat of specified shape, projecting 75 mm outside the wall surface and fixed on
wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary
holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall
be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised
M.S. flats of specified shape and of total length 420 mm and shall be fixed with
M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.
1157
17.77.1
Code
1007
2205
0116
0103
0114
13.50.1
9999
8.8.1.1
17.77.2
Code
1007
2205
Total bracket length 580 mm of approved shape and design (for single 100 mm
dia pipe)
Description
MATERIAL
M.S. flats 50x5mm 5 x 0.58 = 2.90m
@ 1.97 kg/ metre = 5.71 kg.
M.S. flats 30x1.6mm 5x0.42 = 2.10m.
0.38kg/metre = 0.80kg.
Total = 6.51kg.
Add wastage 5% = 0.33kg.
Total = 6.86 kg.= 0.0686 quintal
and R.S. joists
Carriage of Steel
LABOUR
Fitter (grade 1)
Beldar
priming coat
5x0.58x0.11 = 0.32
5x0.42x0.063 = 0.13
Total=0.45sqm
Sundries
P/F expansion hold fasteners 6mm threaded
dia 5x4 Nos = 20 nos.
"Rate asper item no. 8.8.1.1 of
SH :- Marble work
Total
i.e. on (844.61 - 520.73) = 323.88
Total
= 327.12
Cost of 5 Nos.
Cost of each
Say
Unit
Quantity
Rate
Amount
quintal
tonne
0.07
0.01
3775.00
92.24
258.97
0.63
day
day
Day
0.03
0.05
0.07
487.00
448.00
368.00
16.07
21.95
23.92
sqm
L.S.
0.45
1.35
34.95
1.73
15.73(A)
2.34
each
20.00
25.25
505.00(A)
844.61
3.24
847.85
49.07
896.92
179.38
179.40
Total bracket length 810 mm of approved shape and design (for two 100 mm dia
pipes)
Description
MATERIAL
M.S. flats 50x5mm 5 x 0.81 = 4.05m
@ 1.97 kg/ metre = 7.98 kg.
M.S. flats 30x1.6mm 5x2x0.42 = 4.20m.
Total = 9.58kg.
Total = 10.06 kg.
M.S.flats 10.06kg. = 0.1006 quintal
and R.S. joists
Carriage of Steel
1158
Unit
Quantity
quintal
tonne
0.10
0.01
Rate
3775.00
92.24
Amount
379.77
0.93
Code
0116
0103
0114
13.50.1
9999
8.8.1.1
17.77.3
Description
LABOUR
Fitter (grade 1)
Beldar
priming coat
5x0.81x0.11 = 0.45
5x2x0.42x0.063 = 0.26
Total =0.71sqm
Sundries
P/F expansion hold fasteners 6mm threaded
dia 5x4 Nos = 20 nos.
"Rate asper item no. 8.8.1.1 of
SH :- Marble work
Total
i.e. on (1004.91 - 529.81) = 475.10
Total
= 479.85
Cost of 5 Nos.
Cost of each
Say
Description
1007

MATERIAL
M.S. flats 50x5mm 5 x 1.04= 5.20m
@ 1.97 kg/ metre = 10.24 kg.
M.S. flats 30x1.6mm 5x3x0.42 = 6.30m.
Total = 12.63kg.
Total = 13.26 kg.
M.S.flats 13.26kg. = 0.1326 quintal
and R.S. joists
Carriage of Steel
LABOUR
Fitter (grade 1)
Beldar
priming coat
5x1.04x0.11 = 0.57
5x3x0.42x0.063 = 0.40
Total=0.97sqm
0116
0103
0114
Quantity
Rate
Amount
day
day
day
0.05
0.07
0.10
487.00
448.00
368.00
23.38
32.26
35.33
sqm
L.S.
0.71
1.98
34.95
1.73
24.81(A)
3.43
each
20.00
25.25
505.00(A)
1004.91
4.75
1009.66
71.98
1081.64
216.32
216.30
Total bracket length 1040 mm of approved shape and design (for three 100 mm
dia pipes)
Code
2205
Unit
1159
Unit
Quantity
Rate
Amount
quintal
tonne
0.13
0.01
3775.00
92.24
500.57
1.22
day
day
day
0.06
0.10
0.13
487.00
448.00
368.00
30.68
42.56
46.37
Code
Description
Unit
Quantity
13.50.1
9999

Sundries
P/F expansion hold fasteners 6mm
threaded dia 5x4 Nos = 20 nos.
Rate asper item no. 8.8.1.1 of
SH :- Marble work
Total
i.e. on (1164.80 - 538.90) = 625.90
Total
= 632.16
Cost of 5 Nos.
Cost of each
Say
sqm
L.S.
0.97
2.60
34.95
1.73
33.90(A)
4.50
each
20.00
25.25
505.00(A)
1164.80
8.8.1.1
17.78
Code
7072
7073
1875
9977
0116
0123
0114
17.79
Rate
Amount
6.26
1171.06
94.82
1265.88
253.17
253.15
Providing and fixing white vitreous china extended wall mounting water closet
of size 780x370x690 mm of approved shape including providing & fixing white
vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre
(adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts,
bolts and gasket etc complete.
Description
MATERIAL
Wall mounted water closet
Adjustable Vetrious China Cistern with fittings
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
each
1.00
1.00
4650.00
2000.00
4650.00
2000.00
each
L.S.
1.00
9.79
330.00
1.73
330.00
16.94
day
day
day
1.00
1.00
1.00
487.00
487.00
368.00
487.00
487.00
368.00
8338.94
83.39
8422.33
1263.35
9685.68
9685.70
Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315
mm having antibacterial /germs free ceramic surface, fixed with cartridge having
debris catcher and hygiene seal.
Code
Description
7074

MATERIAL
White Vetrious China Waterless Urinal
1160
Unit
Quantity
each
1.00
Rate
10105.00
Amount
10105.00
Code
Description
7075
9977
Cistern with fittings for Waterless Urinal

LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
0116
0114
17.80
Code
7076
9977
0116
0114
17.81
Code
1966
Unit
Quantity
Rate
Amount
each
L.S.
1.00
9.79
2400.00
1.73
2400.00
16.94
day
day
0.50
0.50
487.00
368.00
243.50
184.00
12949.44
129.49
13078.93
1961.84
15040.77
15040.75
Providing and fixing white vitreous china battery based infrared sensor operated
urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water
(250 ml & 500 ml consumption), having water inlet from back side, including
fixing to wall with suitable brackets all as per manufacturers specification and
direction of Engineer-in-charge.
Description
MATERIAL
White Vetrious Urinal
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
9.79
4000.00
1.73
4000.00
16.94
day
day
0.50
0.50
487.00
368.00
243.50
184.00
4444.44
44.44
4488.88
673.33
5162.21
5162.20
Providing and fixing floor mounted, white vitreous china single piece, double
traps syphonic water closet of approved brand/make, shape, size and pattern
including integrated white vitreous china cistern of capacity 10 litres with dual
flushing system, including all fittings and fixtures with seat cover, cistern fittings,
nuts, bolts and gasket etc including making connection with the existing P/S
trap, complete in all respect as per directions of Engineer-in-Charge.
Description
Unit

MATERIAL
Floor mounted, white vitreous china single
piece, double traps syphonic water closet
of approved brand/make, shape, size and
pattern including integrated white vitreous
china cistern of capacity 10 litres with dual
1161
Quantity
Rate
Amount
Code
9977
0116
0114
0123
Description
flushing system including all fittings and
fixtures with seat cover, cistern fittings,
nuts, bolts and gasket etc.
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of each
Say
1162
Unit
Quantity
Rate
Amount
each
L.S.
1.00
9.79
9500.00
1.73
9500.00
16.94
day
day
day
1.00
1.00
1.00
487.00
368.00
487.00
487.00
368.00
487.00
10858.94
108.59
10967.53
1645.13
12612.66
12612.65
SUB HEAD : 18.0
WATER SUPPLY
1163
18.1
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE

Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon
black having thermal stability for hot & cold water supply, capable to withstand
temperature up to 80C, including all special fittings of composite material
(engineering plastic blend and brass inserts wherever required) e.g. elbows,
tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing.
This includes testing of joints complete as per direction of the Engineer in
charge.
INTERNAL WORK - EXPOSED ON WALL
18.1.1
Code
8300
9999
0116
0117
0114
18.1.2
Code
8301
9999
0116
0117
0114
1216 (16 mm OD) pipe

Description
Unit

MATERIAL
1216 mm PE-AL-PE Composit pressure pipe
Add 30% for fittings and wastage etc. on (X)
30 * X / 100
Cement, sand and grit
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.00
62.00
620.00(X)
186.00
L.S.
2.73
1.73
4.72
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
1509.99
15.10
1525.09
228.76
1753.85
175.38
175.40
Unit
Quantity

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
SUB HEAD : 18- WATER SUPPLY
1165
Rate
Amount
metre
10.00
78.00
780.00(X)
234.00
L.S.
2.73
1.73
4.72
day
day
day
0.33
0.82
0.66
487.00
448.00
368.00
160.71
367.36
242.88
1789.67
17.90
1807.57
271.14
2078.71
207.87
207.85
18.1.3
Code
8302
9999
0116
0117
0114
18.1.4
Code
8303
9999
0116
0117
0114
18.1.5
Code
8304
9999

Description
Unit

MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.00
110.00
1100.00(X)
330.00
L.S.
2.73
1.73
4.72
day
day
day
0.33
0.98
0.66
487.00
448.00
368.00
160.71
439.04
242.88
2277.35
22.77
2300.12
345.02
2645.14
264.51
264.50
Unit
Quantity

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
10.00
157.00
1570.00(X)
471.00
L.S.
4.16
1.73
7.20
day
day
day
0.33
0.98
0.98
487.00
448.00
368.00
160.71
439.04
360.64
3008.59
30.09
3038.68
455.80
3494.48
349.44
349.45
Unit
Quantity

Description
MATERIAL
30 * X / 100
1166
Rate
Amount
metre
10.00
235.00
2350.00(X)
705.00
L.S.
5.33
1.73
9.22
Code
0116
0117
0114
18.1.6
Code
8305
9999
0116
0117
0114
18.2
Description
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Unit
Quantity
day
day
day
0.33
1.31
1.31
Unit
Quantity
Rate
487.00
448.00
368.00
Amount
160.71
586.88
482.08
4293.89
42.94
4336.83
650.52
4987.35
498.73
498.75

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
10.00
330.00
3300.00(X)
990.00
L.S.
5.33
1.73
9.22
day
day
day
0.33
1.31
1.31
487.00
448.00
368.00
160.71
586.88
482.08
5528.89
55.29
5584.18
837.63
6421.81
642.18
642.20
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE

tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing.
This includes the costs of cutting chases and including testing of joints
complete as per direction of the engineer in charge.
Concealed work, including cutting chases and making good the wall etc.
18.2.1
Code

Description
Unit

MATERIAL
1167
Quantity
Rate
Amount
Code
Description
8300

Add 75% for fittings, clamps and wastage
etc. on (X)
75 * X / 100
Making chases upto 7.5 x 7.5 cm. in walls
and making good the same
Rate as per item no. 18.78 of SH: Water
Supply
LABOUR
Fitter (grade 1)
Beldar
TOTAL
i.e. on (2722.77 - 938.50) = 1784.27
TOTAL
= 1802.11
Cost of 10 metre
Cost of 1 metre
Say
18.78
0116
0117
0114
18.2.2
Code
8301
18.78
0116
0117
0114
Unit
Quantity
metre
10.00
Rate
62.00
Amount
620.00(X)
465.00
metre
10.00
93.85
938.50(A)
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
2722.77
17.84
2740.61
270.32
3010.93
301.09
301.10

Description
Unit

MATERIAL
etc. on (X)
75 * X / 100
Rate as per item no. 18.78 of SH: water
Supply
LABOUR
Fitter (grade 1)
Beldar
TOTAL
i.e. on (3002.77 - 938.50) = 2064.27
TOTAL
= 2084.91
Cost of 10 metre
Cost of 1 metre
Say
1168
metre
Quantity
10.00
Rate
78.00
Amount
780.00(X)
585.00
metre
10.00
93.85
938.50
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
3002.77
20.64
3023.41
312.74
3336.15
333.61
333.60
18.2.3
Code
8302
18.78
0116
0117
0114
18.2.4
Code
8303
18.78
0116
0117
0114

Description
Unit

MATERIAL
etc. on (X)
75 * X / 100
Supply
LABOUR
Fitter (grade 1)
Beldar
TOTAL
i.e. on (3562.77 - 938.50) = 2624.27
TOTAL
= 2650.51
Cost of 10 metre
Cost of 1 metre
Say
metre
Quantity
10.00
Rate
110.00
Amount
1100.00(X)
825.00
metre
10.00
93.85
938.50(A)
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
3562.77
26.24
3589.01
397.58
3986.59
398.65
398.65

Description
Unit

MATERIAL
etc. on (X)
75 * X / 100
Supply
LABOUR
Fitter (grade 1)
Beldar
TOTAL
i.e. on (4385.27 - 938.50) = 3446.77
TOTAL
= 3481.24
Cost of 10 metre
Cost of 1 metre
Say
1169
metre
Quantity
10.00
Rate
157.00
Amount
1570.00(X)
1177.50
metre
10.00
93.85
938.50(A)
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
4385.27
34.47
4419.74
522.19
4941.93
494.19
494.20
18.3
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE

tees, reducers, couplers & connectors etc., with trenching, refilling and testing
of joints complete as per direction of the engineer in charge.
External work
18.3.1
Code
8300
0116
0114
0114
0115
18.3.2
Code
8301
0116
0114
0114
0115

Description
Unit

MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Trenching and refilling etc.
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.00
62.00
620.00(X)
186.00
day
day
0.08
0.16
487.00
368.00
38.96
58.88
day
day
0.66
0.66
368.00
368.00
242.88
242.88
1389.60
13.90
1403.50
210.53
1614.03
161.40
161.40
Unit
Quantity
1620 (20 mm OD ) pipe

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
1170
Rate
Amount
metre
10.00
78.00
780.00(X)
234.00
day
day
0.08
0.16
487.00
368.00
38.96
58.88
day
day
0.66
0.66
368.00
368.00
242.88
242.88
1597.60
15.98
1613.58
242.04
1855.62
185.56
185.55
18.3.3
Code
8302
0116
0114
0114
0115
18.3.4
Code
8303
0116
0114
0114
0115
18.3.5
Code
8304
2025 (25 mm OD ) pipe

Description
Unit

MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.00
110.00
1100.00(X)
330.00
day
day
0.08
0.16
487.00
368.00
38.96
58.88
day
day
0.66
0.66
368.00
368.00
242.88
242.88
2013.60
20.14
2033.74
305.06
2338.80
233.88
233.90
Unit
Quantity
2532 (32 mm OD ) pipe

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
10.00
157.00
1570.00(X)
471.00
day
day
0.08
0.16
487.00
368.00
38.96
58.88
day
day
0.66
0.66
368.00
368.00
242.88
242.88
2624.60
26.25
2650.85
397.63
3048.48
304.84
304.85
Description
Unit
Quantity

MATERIAL
30 * X / 100
metre
3240 (40 mm OD ) pipe
1171
10.00
Rate
235.00
Amount
2350.00(X)
705.00
Code
0116
0114
0114
0115
18.3.6
Code
8305
0116
0114
0114
0115
18.7
Description
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
day
day
0.16
0.33
487.00
368.00
77.92
121.44
day
day
0.66
0.66
368.00
368.00
242.88
242.88
3740.12
37.40
3777.52
566.63
4344.15
434.41
434.40
Unit
Quantity
4050 (50 mm OD ) pipe

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
10.00
330.00
3300.00(X)
990.00
day
day
0.16
0.33
487.00
368.00
77.92
121.44
day
day
0.66
0.66
368.00
368.00
242.88
242.88
4975.12
49.75
5024.87
753.73
5778.60
577.86
577.85
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass
threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step CPVC solvent cement and
testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
18.7.1
Code
8636
15 mm nominal outer dia Pipes

Description
Unit

MATERIAL
Chlorinated Polyvinyl - chloride (CPVC)
pipe 15 mm outer dia.
metre
1172
Quantity
10.00
Rate
35.00
Amount
350.00(X)
Code
9999
0116
0117
0114
18.7.2
Code
8637
9999
0116
0117
0114
18.7.3
Code
8638
9999
0116
0117
Description
Unit

30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
105.00
L.S.
2.73
1.73
4.72
day
day
day
0.33
0.82
0.66
487.00
448.00
368.00
160.71
367.36
242.88
1230.67
12.31
1242.98
186.45
1429.43
142.94
142.95
Unit
Quantity

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
10.00
54.00
540.00(X)
162.00
L.S.
2.73
1.73
4.72
day
day
day
0.33
0.98
0.66
487.00
448.00
368.00
160.71
439.04
242.88
1549.35
15.49
1564.84
234.73
1799.57
179.95
179.95
Unit
Quantity

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
1173
Rate
Amount
metre
10.00
78.00
780.00(X)
234.00
L.S.
2.73
1.73
4.72
day
day
0.33
0.98
487.00
448.00
160.71
439.04
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
day
0.66
Unit
Quantity
18.7.4
Code
8639
9999
0116
0117
0114
18.7.5
Code
8640
9999
0116
0117
0114
Rate
368.00
Amount
242.88
1861.35
18.61
1879.96
281.99
2161.95
216.19
216.20

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
10.00
117.00 1170.00(X)
351.00
L.S.
4.16
1.73
7.20
day
day
day
0.33
0.98
0.98
487.00
448.00
368.00
160.71
439.04
360.64
2488.59
24.89
2513.48
377.02
2890.50
289.05
289.05
Unit
Quantity

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
1174
Rate
Amount
metre
10.00
160.00 1600.00(X)
480.00
L.S.
5.33
1.73
9.22
day
day
day
0.33
1.31
1.31
487.00
448.00
368.00
160.71
586.88
482.08
3318.89
33.19
3352.08
502.81
3854.89
385.48
385.50
18.7.6
Code
8641
9999
0116
0117
0114
18.8

Description
Unit

MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.00
268.00 2680.00(X)
804.00
L.S.
5.33
1.73
9.22
day
day
day
0.33
1.31
1.31
487.00
448.00
368.00
160.71
586.88
482.08
4722.89
47.23
4770.12
715.52
5485.64
548.56
548.55

thermal stability for hot & cold water supply, including all CPVC plain & brass
threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC solvent cement and the cost of
cutting chases and making good the same including testing of joints complete
as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
18.8.1
Code
8636
18.78
0116
0117

Description
Unit

MATERIAL
etc. on (X)
75 * X / 100
Rate as per item no. 18.78 Of SH: Water
Supply
LABOUR
Fitter (grade 1)
1175
metre
Quantity
10.00
Rate
35.00
Amount
350.00(X)
262.50
metre
10.00
93.85
938.50(A)
day
day
0.33
0.66
487.00
448.00
160.71
295.68
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
i.e. on (2250.27 - 938.50) = 1311.77
TOTAL
= 1324.89
Cost of 10 metre
Cost of 1 metre
Say
day
0.66
18.8.2
Code
8637
18.78
0116
0117
0114
18.8.3
Code
8638
Rate
368.00
Amount
242.88
2250.27
13.12
2263.39
198.73
2462.12
246.21
246.20

Description
Unit

MATERIAL
etc. on (X)
75 * X / 100
Supply
LABOUR
Fitter (grade 1)
Beldar
TOTAL
i.e. on (2582.77 - 938.50) = 1644.27
TOTAL
= 1660.71
Cost of 10 metre
Cost of 1 metre
Say
metre
Quantity
10.00
Rate
54.00
Amount
540.00(X)
405.00
metre
10.00
93.85
938.50(A)
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
2582.77
16.44
2599.21
249.11
2848.32
284.83
284.85

Description
Unit

MATERIAL
etc. on (X)
75 * X / 100
metre
1176
Quantity
10.00
Rate
78.00
Amount
780.00(X)
585.00
Code
18.78
0116
0117
0114
18.8.4
Code
8639
18.78
0116
0117
0114
Description
Supply
LABOUR
Fitter (grade 1)
Beldar
TOTAL
i.e. on (3002.77 - 938.50) = 2064.27
TOTAL
= 2084.91
Cost of 10 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
metre
10.00
93.85
938.50(A)
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
3002.77
20.64
3023.41
312.74
3336.15
333.61
333.60

Description
Unit

MATERIAL
etc. on (X)
75 * X / 100
Supply
LABOUR
Fitter (grade 1)
Beldar
TOTAL
i.e. on (3685.27 - 938.50) = 2746.77
TOTAL
= 2774.24
Cost of 10 metre
Cost of 1 metre
Say
1177
metre
Quantity
10.00
Rate
Amount
117.00 1170.00(X)
877.50
metre
10.00
93.85
938.50(A)
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
3685.27
27.47
3712.74
416.14
4128.88
412.88
412.90
18.9

thermal stability for hot & cold water supply including all CPVC plain & brass
threaded fittings This includes jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling & testing of joints complete as per direction
of Engineer in Charge.
External work
18.9.1
Code
8636
0116
0114
0114
0115
18.9.2
Code
8637
0116
0114
0114
0115

Description
Unit

MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.00
35.00
350.00(X)
105.00
day
day
0.08
0.16
487.00
368.00
38.96
58.88
day
day
0.66
0.66
368.00
368.00
242.88
242.88
1038.60
10.39
1048.99
157.35
1206.34
120.63
120.65
Unit
Quantity

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
1178
Rate
Amount
metre
10.00
54.00
540.00(X)
162.00
day
day
0.08
0.16
487.00
368.00
38.96
58.88
day
day
0.66
0.66
368.00
368.00
242.88
242.88
1285.60
12.86
1298.46
194.77
1493.23
149.32
149.30
18.9.3
Code
8638
0116
0114
0114
0115
18.9.4
Code
8639
0116
0114
0114
0115
18.9.5
Code
8640

Description
Unit

MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.00
78.00
780.00(X)
234.00
day
day
0.12
0.25
487.00
368.00
58.44
92.00
day
day
0.66
0.66
368.00
368.00
242.88
242.88
1650.20
16.50
1666.70
250.01
1916.71
191.67
191.65
Unit
Quantity

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
10.00
117.00 1170.00(X)
351.00
day
day
0.12
0.25
487.00
368.00
58.44
92.00
day
day
0.66
0.66
368.00
368.00
242.88
242.88
2157.20
21.57
2178.77
326.82
2505.59
250.55
250.55
Description
Unit
Quantity

MATERIAL
metre
1179
10.00
Rate
Amount
160.00 1600.00(X)
Code
0116
0114
0114
0115
18.9.6
Code
8641
0116
0114
0114
0115
18.9.7
Code
8642
0116
0114
Description
Unit

30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
480.00
day
day
0.16
0.33
487.00
368.00
77.92
121.44
day
day
0.66
0.66
368.00
368.00
242.88
242.88
2765.12
27.65
2792.77
418.92
3211.69
321.16
321.15
Unit
Quantity

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
10.00
268.00 2680.00(X)
804.00
day
day
0.16
0.33
487.00
368.00
77.92
121.44
day
day
0.66
0.66
368.00
368.00
242.88
242.88
4169.12
41.69
4210.81
631.62
4842.43
484.24
484.25
Unit
Quantity
62.50 mm nominal inner dia Pipes

Description
MATERIAL
pipe 62.5mm inner dia.
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
1180
metre
10.00
day
day
0.25
0.66
Rate
Amount
651.00 6510.00(X)
1953.00
487.00
368.00
121.75
242.88
Code
0114
0115
18.9.8
Code
8643
0116
0114
0114
0115
18.9.9
Code
8644
0116
0114
0114
Description
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Unit
Quantity
day
day
0.66
0.66
Unit
Quantity
Rate
368.00
368.00
Amount
242.88
242.88
9313.39
93.13
9406.52
1410.98
10817.50
1081.75
1081.75
75 mm nominal inner dia Pipes

Description
MATERIAL
pipe 75 mm inner dia.
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
10.00
730.00 7300.00(X)
2190.00
day
day
0.25
0.66
487.00
368.00
121.75
242.88
day
day
0.66
0.66
368.00
368.00
242.88
242.88
10340.39
103.40
10443.79
1566.57
12010.36
1201.03
1201.05
Unit
Quantity

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
1181
Rate
Amount
metre
10.00
985.00 9850.00(X)
2955.00
day
day
0.37
0.97
487.00
368.00
180.19
356.96
day
0.80
368.00
294.40
Code
Description
Unit
Quantity
0115
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
day
0.80
Unit
Quantity
18.9.10
Code
8645
0116
0114
0114
0115
18.10
Rate
368.00
Amount
294.40
13930.95
139.31
14070.26
2110.54
16180.80
1618.08
1618.10

Description
MATERIAL
30 * X / 100
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
10.00
1462.00
14620.00(X)
4386.00
day
day
0.58
1.54
487.00
368.00
282.46
566.72
day
day
1.20
1.20
368.00
368.00
441.60
441.60
20738.38
207.38
20945.76
3141.86
24087.62
2408.76
2408.75
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting
and making good the walls etc.
Internal work - Exposed on wall
18.10.1
Code
1545
2271
9999
9999
0116
0117
15 mm dia nominal bore

Description
Unit

MATERIAL
G.I. pipes 15 mm dia
Weight for carriage = pipe weight + 15% for
fiitings =
1.15 * 12.30 = 14.145 kg = 0.014145 tonne
Carriage of G.I. pipes below 100 mm dia
White lead, hemp, oil etc.
LABOUR
Fitter (grade 1)
1182
Quantity
Rate
Amount
metre
11.50
77.00
885.50
tonne
L.S.
L.S.
0.014145
8.06
2.73
92.24
1.73
1.73
1.30
13.94
4.72
0.33
0.66
487.00
448.00
160.71
295.68
day
day
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
day
0.66
Unit
Quantity
18.10.2
Code
1546
2271
9999
9999
0116
0117
0114
18.10.3
Code
1547
2271
9999
9999
0116
0117
Rate
368.00
Amount
242.88
1604.73
16.05
1620.78
243.12
1863.90
186.39
186.40

Description
MATERIAL
fiitings =
1.15 * 15.90= 18.285 kg = 0.018285 tonne
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
11.50
99.00 1138.50(A)
tonne
L.S.
L.S.
0.018285
8.06
2.73
92.24
1.73
1.73
1.69
13.94
4.72
day
day
day
0.33
0.82
0.66
487.00
448.00
368.00
160.71
367.36
242.88
1929.80
19.30
1949.10
292.37
2241.47
224.14
224.15
Unit
Quantity

Description
MATERIAL
Weight for carriage = pipe weight +
15% for fiitings =
1.15 * 24.60 = 28.29 kg = 0.02829 tonne
LABOUR
Fitter (grade 1)
1183
Rate
Amount
metre
11.50
tonne
L.S.
L.S.
0.02829
9.49
4.16
92.24
1.73
1.73
2.61
16.42
7.20
0.33
0.98
487.00
448.00
160.71
439.04
day
day
110.00 1265.00(A)
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
day
0.66
Unit
Quantity
18.10.4
Code
1548
2271
9999
9999
0116
0117
0114
18.10.5
Code
1549
2271
9999
9999
0116
0117
Rate
368.00
Amount
242.88
2133.86
21.34
2155.20
323.28
2478.48
247.84
247.85

Description
MATERIAL
15% for fiitings =
1.15 * 31.70 = 36.455 kg = 0.036455 tonne
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
11.50
145.00
1667.50
tonne
L.S.
L.S.
0.036455
9.49
4.16
92.24
1.73
1.73
3.36
16.42
7.20
day
day
day
0.33
0.98
0.98
487.00
448.00
368.00
160.71
439.04
360.64
2654.87
26.55
2681.42
402.21
3083.63
308.36
308.35
Unit
Quantity

Description
MATERIAL
15% for fiitings =
1.15 * 36.50 = 41.975 kg = 0.041975 tonne
LABOUR
Fitter (grade 1)
1184
Rate
Amount
metre
11.50
185.00
2127.50
tonne
L.S.
L.S.
0.041975
13.52
5.33
92.24
1.73
1.73
3.87
23.39
9.22
0.33
1.31
487.00
448.00
160.71
586.88
day
day
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
day
1.31
Unit
Quantity
18.10.6
Code
1550
2271
9999
9999
0116
0117
0114
Rate
368.00
Amount
482.08
3393.65
33.94
3427.59
514.14
3941.73
394.17
394.15

Description
MATERIAL
15% for fiitings =
1.15 * 51.70 = 59.455 kg = 0.059455 tonne
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Rate
Amount
metre
11.50
220.00
2530.00
tonne
L.S.
L.S.
0.059455
13.52
5.33
92.24
1.73
1.73
5.48
23.39
9.22
0.33
1.64
1.64
487.00
448.00
368.00
160.71
734.72
603.52
4067.04
40.67
4107.71
616.16
4723.87
472.38
472.40
day
day
day
18.11
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making
good the walls etc. concealed pipe, including painting with anti corrosive
bitumastic paint, cutting chases and making good the wall :
18.11.1
Code
1545
2271
9999
Description
Unit

MATERIAL
Weight for carriage = pipe weight + 15%
for fiitings =
1.15 * 12.30 = 14.145 kg = 0.014145 tonne
Painting G.I. pipe with anti-corrosive
bitumastic paint two or more coats
1185
Quantity
Rate
Amount
metre
11.50
77.00
885.50
tonne
L.S.
0.014145
8.06
92.24
1.73
1.30
13.94
Code
Description
18.40.1
(Rate same as per item no. 18.40.1)

Making chases upto 7.5x7.5cm in walls
Rate as per item no. 18.78 Of SH Water
Supply
LABOUR
Fitter (grade 1)
Beldar
TOTAL
i.e. on (2598.51 - 998.50) = 1600.01
TOTAL
= 1616.01
Cost of 10 metre
Cost of 1 metre
Say
18.78
0116
0117
0114
18.11.2
Code
1546
2271
9999
18.40.2
18.78
0116
0117
0114
Unit
Quantity
Rate
Amount
metre
10.00
6.00
60.00(A)
metre
10.00
93.85
938.50(A)
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
2598.51
16.00
2614.51
242.40
2856.91
285.69
285.70

Description
Unit

MATERIAL
15% for fiitings =
1.15 * 15.90= 18.285 kg = 0.018285 tonne
Painting G.I. pipe with anti-corrosive
bitumastic paint two or more coats
(Rate same as per item no. 18.40.2 Of
SH Water Supply)
Making chases upto 7.5x7.5cm in walls
Rate as per item no. 18.78 Of SH Water
Supply
LABOUR
Fitter (grade 1)
Beldar
TOTAL
i.e. on (2862.90 - 1009.50) = 1853.40
TOTAL
= 1871.93
Cost of 10 metre
Cost of 1 metre
Say
1186
Quantity
Rate
Amount
metre
11.50
99.00
1138.50
tonne
L.S.
0.018285
8.06
92.24
1.73
1.69
13.94
metre
10.00
7.10
71.00(A)
metre
10.00
93.85
938.50(A)
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
2862.90
18.53
2881.43
280.79
3162.22
316.22
316.20
18.12
Providing and fixing G.I. pipes complete with G.I. fittings including trenching
and refilling etc.
External work
18.12.1
Code
1545
2271
9999
0116
0114
0114
0115
18.12.2
Code
1546
2271
9999
0116
0114
0114
0115

Description
Unit

MATERIAL
for fiitings =
1.02 * 12.30 = 12.546 kg = 0.012546 tonne
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.20
77.00
785.40
tonne
L.S.
0.012546
5.33
92.24
1.73
1.16
9.22
day
day
0.08
0.16
487.00
368.00
38.96
58.88
day
day
0.66
0.66
368.00
368.00
242.88
242.88
1379.38
13.79
1393.17
208.98
1602.15
160.21
160.20
Unit
Quantity

Description
MATERIAL
for fiitings =
1.02 * 15.90 = 16.218 kg = 0.016218 tonne
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
1187
Rate
Amount
metre
10.20
99.00
1009.80
tonne
L.S.
0.016218
5.33
92.24
1.73
1.50
9.22
day
day
0.08
0.16
487.00
368.00
38.96
58.88
day
day
0.66
0.66
368.00
368.00
242.88
242.88
1604.12
16.04
1620.16
243.02
1863.18
186.31
186.30
18.12.3
Code
1547
2271
9999
0116
0114
0114
0115
18.12.4
Code
1548
2271
9999
0116
0114
0114
0115

Description
Unit

MATERIAL
fiitings =
1.02 * 24.60 = 25.092 kg = 0.025092 tonne
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.20
110.00
1122.00
tonne
L.S.
0.025092
6.76
92.24
1.73
2.31
11.69
day
day
0.12
0.25
487.00
368.00
58.44
92.00
day
day
0.66
0.66
368.00
368.00
242.88
242.88
1772.20
17.72
1789.92
268.49
2058.41
205.84
205.85
Unit
Quantity

Description
MATERIAL
2% for fiitings =
1.02 * 31.70 = 32.334 kg = 0.032334 tonne
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
1188
Rate
Amount
metre
10.20
145.00
1479.00
tonne
L.S.
0.032334
6.76
92.24
1.73
2.98
11.69
day
day
0.12
0.25
487.00
368.00
58.44
92.00
day
day
0.66
0.66
368.00
368.00
242.88
242.88
2129.87
21.30
2151.17
322.68
2473.85
247.38
247.40
18.12.5
Code
1549
2271
9999
0116
0114
0114
0115
18.12.6
Code
1550
2271
9999
0116
0114
0114
0115

Description
Unit

MATERIAL
2% for fiitings =
1.02 * 36.50 = 37.23 kg = 0.03723 tonne
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.20
185.00
1887.00
tonne
L.S.
0.03723
9.49
92.24
1.73
3.43
16.42
day
day
0.16
0.33
487.00
368.00
77.92
121.44
day
day
0.66
0.66
368.00
368.00
242.88
242.88
2591.97
25.92
2617.89
392.68
3010.57
301.05
301.05
Unit
Quantity

Description
MATERIAL
2% for fiitings =
1.02 * 51.70 = 52.73 kg = 0.05273 tonne
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
1189
Rate
Amount
metre
10.20
220.00
2244.00
tonne
L.S.
0.052734
9.49
92.24
1.73
4.86
16.42
day
day
0.16
0.33
487.00
368.00
77.92
121.44
day
day
0.66
0.66
368.00
368.00
242.88
242.88
2950.40
29.50
2979.90
446.99
3426.89
342.68
342.70
18.12.7
Code
1551
2271
9999
0116
0114
0114
0115
18.12.8
Code
1552
2271
9999
0116
0114
0114
0115

Description
Unit

MATERIAL
2% for fiitings =
1.02 * 66.30 = 67.626 kg = 0.067626 tonne
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.20
295.00
3009.00
tonne
L.S.
0.067626
13.52
92.24
1.73
6.24
23.39
day
day
0.25
0.66
487.00
368.00
121.75
242.88
day
day
0.66
0.66
368.00
368.00
242.88
242.88
3889.02
38.89
3927.91
589.19
4517.10
451.71
451.70
Unit
Quantity

Description
MATERIAL
Weight for carriage = pipe weight
+ 2% for fiitings =
1.02 * 86.40 = 88.128 kg = 0.088128 tonne
LABOUR
Fitter (grade 1)
Beldar
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
1190
Rate
Amount
metre
10.20
400.00
4080.00
tonne
L.S.
0.088128
13.52
92.24
1.73
8.13
23.39
day
day
0.25
0.66
487.00
368.00
121.75
242.88
day
day
0.66
0.66
368.00
368.00
242.88
242.88
4961.91
49.62
5011.53
751.73
5763.26
576.32
576.30
18.13
Making connection of G.I. distribution branch with G.I. main of following sizes
by providing and fixing tee, including cutting and threading the pipe etc.
complete :
18.13.1
25 to 40 mm nominal bore
Code
1608
1555
9988
0116
0114
18.13.2
Code
1612
1559
9988
0116
0114
18.14
Code
1555
9988
0116
Description
Details of cost for one connection.
Take 25mm dia as an average size.
MATERIAL
G.I. tees (equal) 25 mm
G.I. back (jam) nuts 25 mm dia
Carriage of materials and sundries
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of one connection
Say
Unit
Quantity
Rate
Amount
each
each
L.S.
1.00
1.00
5.33
40.00
8.00
1.73
40.00
8.00
9.22
day
day
0.33
0.33
487.00
368.00
160.71
121.44
339.37
3.39
342.76
51.41
394.17
394.15
Unit
Quantity
each
each
L.S.
1.00
1.00
5.33
250.00
20.00
1.73
250.00
20.00
9.22
day
day
0.45
0.45
487.00
368.00
219.15
165.60
663.97
6.64
670.61
100.59
771.20
771.20
50 to 80 mm nominal bore
Description
Details of cost for one connection.
Take 65mm dia as an average size.
MATERIAL
G.I. tees (equal) 65 mm
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of one connection
Say
Rate
Amount
Fixing water meter and stop cock in G.I. pipe line including cutting and
threading the pipe and making long screws etc. complete (cost of water meter
and stop cock to be paid separately).
Description
Unit
Quantity
Details of cost for one meter with stop cock

MATERIAL
LABOUR
Fitter (grade 1)
each
L.S.
1.00
5.33
8.00
1.73
8.00
9.22
day
0.33
487.00
160.71
1191
Rate
Amount
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of one metre with stop cock
Say
day
0.33
18.15
Providing and fixing brass bib cock of approved quality :
18.15.1
15 mm nominal bore
Code
1339
9988
18.15.2
Code
1340
9988
Description
MATERIAL
Brass bib-cock 15 mm dia
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
8.06
Unit
Quantity
each
L.S.
1.00
9.49
Description
MATERIAL
Brass bib-cock 20 mm dia
TOTAL
TOTAL
Cost of one no.
Say
Providing and fixing brass stop cock of approved quality :
18.16.1
15 mm nominal bore
1342
9988
368.00
Rate
210.00
1.73
Amount
121.44
299.37
2.99
302.36
45.35
347.71
347.70
Amount
210.00
13.94
223.94
2.24
226.18
33.93
260.11
260.10
20 mm nominal bore
18.16
Code
Rate
Description
MATERIAL
Brass stop-cock 15 mm dia
TOTAL
TOTAL
Cost of one no.
Say
1192
Unit
Quantity
each
L.S.
1.00
8.06
Rate
225.00
1.73
Rate
210.00
1.73
Amount
225.00
16.42
241.42
2.41
243.83
36.57
280.40
280.40
Amount
210.00
13.94
223.94
2.24
226.18
33.93
260.11
260.10
18.16.2
Code
1343
9988
20 mm nominal bore
Description
MATERIAL
Brass stop-cock 20 mm dia
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
9.49
Rate
225.00
1.73
Amount
225.00
16.42
241.42
2.41
243.83
36.57
280.40
280.40
18.17
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end) :
18.17.1
25 mm nominal bore
Code
1927
9988
18.17.1A
Code
1926
9977
18.17.2
Code
1928
9988
Description
MATERIAL
Brass full way valve with C.I. wheel
(screwed end) 25 mm dia
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
10.79
Unit
Quantity
each
L.S.
1.00
9.49
Unit
Quantity
each
L.S.
1.00
12.22
Rate
350.00
1.73
Amount
350.00
18.67
368.67
3.69
372.36
55.85
428.21
428.20
20 mm nominal bore
Description
MATERIAL
20 mm dia Gunmetal gate valve with wheel
Carriage of metrial and fixing charge
TOTAL
TOTAL
Cost of 1 No.
Say
Rate
325.00
1.73
Amount
325.00
16.42
341.42
3.41
344.83
51.72
396.56
396.55
32 mm nominal bore.
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
1193
Rate
410.00
1.73
Amount
410.00
21.14
431.14
4.31
435.45
65.32
500.77
500.75
18.17.3
Code
1929
9988
18.17.4
Code
1930
9988
18.17.5
Code
1931
9988
18.17.6
Code
1932
9988
40 mm nominal bore
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
14.82
Unit
Quantity
each
L.S.
1.00
16.12
Unit
Quantity
each
L.S.
1.00
18.85
Rate
480.00
1.73
Amount
480.00
23.39
503.39
5.03
508.42
76.26
584.68
584.70
50 mm nominal bore
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
Rate
620.00
1.73
Amount
620.00
25.64
645.64
6.46
652.10
97.82
749.92
749.90
65 mm nominal bore
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
Rate
1080.00
1.73
Amount
1080.00
27.89
1107.89
11.08
1118.97
167.85
1286.82
1286.80
80 mm nominal bore
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
1194
Rate
1620.00
1.73
Amount
1620.00
32.61
1652.61
16.53
1669.14
250.37
1919.51
1919.50
18.18
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :
18.18.1
15 mm nominal bore
Code
1922
9988
18.18.2
Code
1923
9988
18.18.3
Code
1924
9988
Description
MATERIAL
H.P. or L.P. ball valve with polythene
floats: 15 mm dia
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
21.58
Unit
Quantity
each
L.S.
1.00
26.91
Unit
Quantity
each
L.S.
1.00
32.24
Rate
210.00
1.73
Amount
210.00
37.33
247.33
2.47
249.80
37.47
287.27
287.25
20 mm nominal bore
Description
MATERIAL
floats: 20 mm dia
TOTAL
TOTAL
Cost of one no.
Say
Rate
235.00
1.73
Amount
235.00
46.55
281.55
2.82
284.37
42.66
327.03
327.05
25 mm nominal bore
Description
MATERIAL
floats: 25 mm dia
TOTAL
TOTAL
Cost of one no.
Say
1195
Rate
230.00
1.73
Amount
230.00
55.78
285.78
2.86
288.64
43.30
331.94
331.95
18.19
Providing and fixing gun metal non- return valve of approved quality (screwed
end) :
18.19.1
25 mm nominal bore
18.19.1.1
Horizontal
Code
1933
9988
18.19.1.2
Code
3080
9988
Description
MATERIAL
Gunmetal non-return valve-horizontal
TOTAL
TOTAL
Cost of one no.
Say
Description
MATERIAL
Gunmetal non-return valve-vertical
TOTAL
TOTAL
Cost of one no.
Say
32 mm nominal bore
18.19.2.1
Horizontal
1934
9988
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
13.52
Unit
Quantity
each
L.S.
1.00
14.82
Rate
330.00
1.73
Amount
330.00
23.39
353.39
3.53
356.92
53.54
410.46
410.45
Vertical
18.19.2
Code
Unit
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
1196
Rate
350.00
1.73
Rate
450.00
1.73
Amount
350.00
23.39
373.39
3.73
377.12
56.57
433.69
433.70
Amount
450.00
25.64
475.64
4.76
480.40
72.06
552.46
552.45
18.19.2.2
Code
3084
9988
Vertical
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
18.19.3
40 mm nominal bore
18.19.3.1
Horizontal
Code
1935
9988
18.19.3.2
Code
3088
9988
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
14.82
Unit
Quantity
each
L.S.
1.00
16.12
Unit
Quantity
each
L.S.
1.00
16.12
Rate
500.00
1.73
Rate
560.00
1.73
Amount
500.00
25.64
525.64
5.26
530.90
79.64
610.54
610.55
Amount
560.00
27.89
587.89
5.88
593.77
89.07
682.84
682.85
Vertical
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
1197
Rate
700.00
1.73
Amount
700.00
27.89
727.89
7.28
735.17
110.28
845.45
845.45
18.19.4
50 mm nominal bore
18.19.4.1
Horizontal
Code
1936
9988
18.19.4.2
Code
3092
9988
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
65 mm nominal bore
18.19.5.1
Horizontal
1937
9988
Quantity
each
L.S.
1.00
17.55
Unit
Quantity
each
L.S.
1.00
17.55
Unit
Quantity
each
L.S.
1.00
18.85
Rate
820.00
1.73
Amount
820.00
30.36
850.36
8.50
858.86
128.83
987.69
987.70
Vertical
18.19.5
Code
Unit
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
1198
Rate
900.00
1.73
Rate
1490.00
1.73
Amount
900.00
30.36
930.36
9.30
939.66
140.95
1080.61
1080.60
Amount
1490.00
32.61
1522.61
15.23
1537.84
230.68
1768.52
1768.50
18.19.5.2
Code
3096
9988
Vertical
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
18.19.6
80 mm nominal bore
18.19.6.1
Horizontal
Code
1938
9988
18.19.6.2
Code
3300
9988
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
18.85
Unit
Quantity
each
L.S.
1.00
20.28
Unit
Quantity
each
L.S.
1.00
20.28
Rate
1500.00
1.73
Rate
2120.00
1.73
Amount
1500.00
32.61
1532.61
15.33
1547.94
232.19
1780.13
1780.15
Amount
2120.00
35.08
2155.08
21.55
2176.63
326.49
2503.12
2503.10
Vertical
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
1199
Rate
2500.00
1.73
Amount
2500.00
35.08
2535.08
25.35
2560.43
384.06
2944.49
2944.50
18.20
Providing and fixing brass ferrule with C.I. mouth cover including boring and
tapping the main :
18.20.1
15 mm nominal bore
Code
1360
9988
18.20.2
Code
1361
9988
18.20.3
Code
1362
9988
Description
MATERIAL
C.I.mouth, brass ferrule 15 mm dia
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
40.30
Unit
Quantity
each
L.S.
1.00
47.19
Unit
Quantity
each
L.S.
1.00
53.82
Rate
140.00
1.73
Amount
140.00
69.72
209.72
2.10
211.82
31.77
243.59
243.60
20 mm nominal bore
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
Rate
160.00
1.73
Amount
160.00
81.64
241.64
2.42
244.06
36.61
280.67
280.65
25 mm nominal bore
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
1200
Rate
220.00
1.73
Amount
220.00
93.11
313.11
3.13
316.24
47.44
363.68
363.70
18.21
Providing and fixing uplasticised PVC connection pipe with brass unions :
18.21.1
30 cm length
18.21.1.1
15 mm nominal bore
Code
1687
9988
18.21.1.2
Code
1688
9988
Description
MATERIAL
Unplasticised P.V.C.connection pipe with
brass union 30 cm long 15 mm bore
TOTAL
TOTAL
Cost of one no.
Say
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
45 cm length
18.21.2.1
15 mm nominal bore
1689
9988
Quantity
each
L.S.
1.00
12.22
Unit
Quantity
each
L.S.
1.00
12.22
Unit
Quantity
each
L.S.
1.00
13.52
Rate
30.00
1.73
Amount
30.00
21.14
51.14
0.51
51.65
7.75
59.40
59.40
20 mm nominal bore
18.21.2
Code
Unit
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
1201
Rate
35.00
1.73
Rate
35.00
1.73
Amount
35.00
21.14
56.14
0.56
56.70
8.51
65.21
65.20
Amount
35.00
23.39
58.39
0.58
58.97
8.85
67.82
67.80
18.21.2.2
Code
1690
9988
20 mm nominal bore
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
13.52
Rate
Amount
48.00
1.73
48.00
23.39
71.39
0.71
72.10
10.82
82.92
82.90
18.22
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
18.22.1
100 mm diameter
Code
1878
9988
18.22.2
Code
1879
9988
Description
MATERIAL
Shower rose C.P.brass for 15 to 20 mm
inlet 100 mm dia
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
6.76
Unit
Quantity
each
L.S.
1.00
8.06
Rate
50.00
1.73
Amount
50.00
11.69
61.69
0.62
62.31
9.35
71.66
71.65
150 mm diameter
Description
MATERIAL
Shower rose C.P.brass for 15 to 20 mm
inlet 150 mm dia
TOTAL
TOTAL
Cost of one no.
Say
1202
Rate
60.00
1.73
Amount
60.00
13.94
73.94
0.74
74.68
11.20
85.88
85.90
18.23
Code
0116
0117
0114
9999
18.24
Code
0116
0117
0114
9999
Laying in position centrifugally cast (spun) iron S&S or flanged pipes

(excluding cost of pipe).
Description
Details of cost for 5.14 quintal
10 m of 200 mm dia C.I. pipe class 'A'
Weight = (2x257) = 514kg = 5.14 quintal
LABOUR for laying pipe
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of one quintal
Say
Unit
Quantity
day
day
day
L.S.
0.17
0.17
1.33
16.12
Rate
487.00
448.00
368.00
1.73
Amount
82.79
76.16
489.44
27.89
676.28
6.76
683.04
102.46
785.50
152.82
152.80
Laying in position S&S or flanged C.I. special such as tees, bends, collars,
tapers and caps etc.(excluding cost of specials).
Description
Details of cost for 7 quintal
10 Nos. Tee 200x150mm Weight =
70x10 = 700kg.
LABOUR for laying teeFitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of 7 quintal
Cost of one quintal
Say
Unit
Quantity
day
day
day
L.S.
0.93
0.62
2.48
40.17
Rate
487.00
448.00
368.00
1.73
Amount
452.91
277.76
912.64
69.49
1712.80
17.13
1729.93
259.49
1989.42
284.20
284.20
18.25
Providing and laying S&S C.I. standard specials such as tees, bends, collars,
tapers, caps etc. (Heavy class):
18.25.1
Up to 300 mm dia
Code
1464
2309
Description
Unit

MATERIAL
S & S.C.I.standard specials upto 300 mm
dia (heavy class)
Carriage of Cast iron fittings
1203
quintal
tonne
Quantity
1.00
0.10
Rate
3600.00
92.24
Amount
3600.00
9.22
Code
18.24
18.25.2
Code
1466
2309
18.24
Description
LABOUR
Rate as per item No. 18.24 Of SH: Water
Supply
TOTAL
i.e. on (3893.42 - 284.20) = 3609.22
TOTAL
= 3645.31
Cost of one quintal
Say
Unit
Quantity
quintal
1.00
Rate
284.20
Amount
284.20(A)
3893.42
36.09
3929.51
546.80
4476.31
4476.30
Over 300 mm dia

Description
Unit

MATERIAL
S & S.C.I.standard specials over
300 mm dia (heavy class)
LABOUR
For laying
Rate as per item No. 18.24 Of
SH: Water Supply
TOTAL
i.e. on (3993.42 - 284.20) = 3709.22
TOTAL
= 3746.31
Cost of one quintal
Say
Quantity
Rate
Amount
quintal
tonne
1.00
0.10
3700.00
92.24
3700.00
9.22
quintal
1.00
284.20
284.20(A)
3993.42
37.09
4030.51
561.95
4592.46
4592.45
18.26
Providing and laying flanged C.I. standard specials such as tees, bends, collars,
tapers, caps etc., suitable for flanged jointing as per IS : 1538 :
18.26.1
Up to 300 mm dia
Code
1468
2309
Description
Unit

MATERIAL
Flanged C.I. standard specials upto
300 mm dia(heavy class)
LABOUR
For laying
quintal
tonne
1204
Quantity
1.00
0.10
Rate
5500.00
92.24
Amount
5500.00
9.22
Code
Description
18.24
Rate as per item No. 18.24 of SH: Water

Supply
TOTAL
i.e. on (5793.42 - 284.20) = 5509.22
TOTAL
= 5564.31
Cost of one quintal
Say
18.26.2
Code
1470
2309
18.24
Unit
Quantity
quintal
1.00
Rate
284.20
Amount
284.20(A)
5793.42
55.09
5848.51
834.65
6683.16
6683.15
Over 300 mm dia

Description
Unit

MATERIAL
Flanged C.I. standard specials over
300 mm dia(heavy class)
LABOUR
For laying
Rate as per item No. 18.24 of SH: Water
Supply
TOTAL
i.e. on (5793.42 - 284.20) = 5509.22
TOTAL
= 5564.31
Cost of one quintal
Say
Quantity
Rate
Amount
quintal
tonne
1.00
0.10
5500.00
92.24
5500.00
9.22
quintal
1.00
284.20
284.20(A)
5793.42
55.09
5848.51
834.65
6683.16
6683.15
18.27
Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA)
conforming to IS - 1536 :
18.27.1
100 mm dia pipe
Code
7697
2319
Description
Unit

MATERIAL
100mm dia. spun iron pipes (in 5.5 m lengths)
Weight of 1 m pipes = 19.820 Kg
Weight of 10m pipes 19.820x10 = 198.20 Kg
S&S Centrifugally (Spun) C.I. Pipe class
LA 100mm dia
Carriage of Spun iron S & S pipes
100 mm dia
Labour for laying
1205
Quantity
Rate
Amount
metre
10.00
900.00
9000.00
100 metre
0.10
226.82
22.68
Code
Description
18.23
Rate same as per item no 18.23 of

SH: Water Supply
TOTAL
i.e. on (9325.22 - 302.54) = 9022.68
TOTAL
= 9112.91
Cost of 10 metre
Cost of one metre
Say
18.27.2
Code
7698
2320
18.23
18.27.3
Code
7699
2321
Unit
Quantity
quintal
1.98
Rate
152.80
Amount
302.54(A)
9325.22
90.23
9415.45
1366.94
10782.39
1078.23
1078.25
125 mm dia pipe

Description
Unit

MATERIAL
LA 125mm dia
125 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (11624.52 - 394.22) = 11230.30
TOTAL
= 11342.60
Cost of 10 metre
Cost of one metre
Say
Quantity
Rate
Amount
metre
10.00
1120.00
11200.00
100 metre
0.10
302.97
30.30
quintal
2.58
152.80
394.22(A)
11624.52
112.30
11736.82
1701.39
13438.21
1343.82
1343.80
150 mm dia pipe

Description
Unit

MATERIAL
LA 150mm dia
150 mm dia
1206
Quantity
Rate
Amount
metre
10.00
1350.00
13500.00
100 metre
0.10
378.03
37.80
Code
18.23
18.27.4
Code
7700
2322
18.23
18.27.5
Code
7701
2323
Description
Labour for laying
SH: Water Supply
TOTAL
i.e. on (14029.82 - 492.02) = 13537.80
TOTAL
= 13673.18
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
quintal
3.22
Rate
152.80
Amount
492.02(A)
14029.82
135.38
14165.20
2050.98
16216.18
1621.61
1621.60
200 mm dia pipe

Description
Unit

MATERIAL
LA 200mm dia
200 mm dia
LABOUR for laying
SH: Water Supply
TOTAL
i.e. on (23781.18 - 719.69) = 23061.49
TOTAL
= 23292.10
Cost of 10 metre
Cost of one metre
Say
Quantity
Rate
Amount
metre
10.00
2300.00
23000.00
100 metre
0.10
614.93
61.49
quintal
4.71
152.80
719.69(A)
23781.18
230.61
24011.79
3493.82
27505.61
2750.56
2750.55
250 mm dia pipe

Description
Unit

MATERIALS
LA 250mm dia
250 mm dia
1207
Quantity
Rate
Amount
metre
10.00
3000.00
30000.00
100 metre
0.10
873.84
87.38
Code
18.23
18.27.6
Code
7702
2324
18.23
18.27.7
Code
7703
Description
LABOUR for laying
SH: Water Supply
TOTAL
i.e. on (31057.66 - 970.28) = 30087.38
TOTAL
= 30388.25
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
quintal
6.35
Rate
152.80
Amount
970.28(A)
31057.66
300.87
31358.53
4558.24
35916.77
3591.67
3591.65
300 mm dia pipe

Description
Unit

MATERIAL
LA 300mm dia
300 mm dia
LABOUR for laying
SH: Water Supply
TOTAL
i.e. on (41857.91 - 1249.90) = 40608.01
TOTAL
= 41014.09
Cost of 10 metre
Cost of one metre
Say
Quantity
Rate
Amount
metre
10.00
4050.00
40500.00
100 metre
0.10
1080.08
108.01
quintal
8.18
152.80 1249.90(A)
41857.91
406.08
42263.99
6152.11
48416.10
4841.61
4841.60
350 mm dia pipe

Description
Unit

MATERIAL
Weight of 10m pipes 103.10x10 =
1031.00 Kg
LA 350mm dia
metre
1208
Quantity
10.00
Rate
4850.00
Amount
48500.00
Code
Description
2325

350 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (50226.58 - 1575.37) = 48651.21
TOTAL
- 1575.37) = 49137.72
Cost of 10 metre
Cost of one metre
Say
18.23
18.27.8
Code
7704
2326
18.23
18.27.9
Code
Unit
Quantity
100 metre
0.10
quintal
10.31
Rate
1512.11
Amount
151.21
152.80 1575.37(A)
50226.58
486.51
50713.09
7370.66
58083.75
5808.37
5808.35
400 mm dia pipe

Description
Unit

MATERIAL
LA 400mm dia
400 mm dia
LABOUR for laying
SH: Water Supply
TOTAL
i.e. on (66123.84 - 1917.64) = 64206.20
TOTAL
= 64848.26
Cost of 10 metre
Cost of one metre
Say
Quantity
Rate
Amount
metre
10.00
6400.00
64000.00
100 metre
0.10
2061.97
206.20
quintal
12.55
152.80 1917.64(A)
66123.84
642.06
66765.90
9727.24
76493.14
7649.31
7649.30
450 mm dia pipe

Description
Unit

MATERIAL
Weight of 10m pipes 151.270x10 =
1512.70 Kg
1209
Quantity
Rate
Amount
Code
Description
7705

LA 450mm dia
450 mm dia
LABOUR for laying
SH: Water Supply
TOTAL
i.e. on (80063.88 - 2311.86) = 77752.02
TOTAL
= 78529.54
Cost for 10 metre
Cost of one metre
Say
2327
18.23
18.27.10
Code
7706
2328
18.23
Unit
Quantity
Rate
Amount
metre
10.00
7750.00
77500.00
100 metre
0.10
2520.19
252.02
quintal
15.13
152.80 2311.86(A)
80063.88
777.52
80841.40
11779.43
92620.83
9262.08
9262.10
500 mm dia pipe

Description
Unit

MATERIAL
Weight of 10m pipes 177.090x10
= 1770.90 Kg
LA 500mm dia
500 mm dia
LABOUR for laying
SH: Water Supply
TOTAL
i.e. on (92958.11 - 2706.09) = 90252.02
TOTAL
- 2706.09) = 91154.54
Cost of 10 metre
Cost of one metre
Say
1210
Quantity
Rate
Amount
metre
10.00
9000.00
90000.00
100 metre
0.10
2520.19
252.02
quintal
17.71
152.80 2706.09(A)
92958.11
902.52
93860.63
13673.18
107533.81
10753.38
10753.40
18.27.11
Code
7707
2329
18.23
600 mm dia pipe

Description
Unit

MATERIAL
600mm dia. spun iron pipes (in 5.5 m
lengths)
= 2360.00 Kg
LA 600mm dia
600mm dia
LABOUR for laying
SH: Water Supply
TOTAL
i.e. on (129934.11 - 3606.08) = 126328.03
TOTAL
- 3606.08) = 127591.31
Cost of 10 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.00
12595.00
125950.00
100 metre
0.10
3780.28
378.03
quintal
23.60
152.80 3606.08(A)
129934.11
1263.28
131197.39
19138.70
150336.09
15033.60
15033.60
18.28
Providing lead caulked joints to spun iron or C.I. pipes and specials, including
testing of joints but excluding the cost of pig lead :
18.28.1
Code
1881
0761
0771
9999
9977
0116
0117
0114
Description
Unit

MATERIAL
Spun yarn
0.17x 10 =1.70 kg
Fuel wood
Kerosene oil
Sundries
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 joints
Cost of one joint
Say
1211
Quantity
Rate
Amount
kilogram
1.70
50.00
85.00
quintal
litre
L.S.
L.S.
0.28
0.38
6.76
5.33
500.00
45.00
1.73
1.73
140.00
17.10
11.69
9.22
day
day
day
1.00
1.00
2.00
487.00
448.00
368.00
487.00
448.00
736.00
1934.01
19.34
1953.35
293.00
2246.35
224.63
224.65
18.28.2
Code
1881
0761
0771
9999
9977
0116
0117
0114
18.28.3
Code
1881
0761
0771
9999
9977
0116
0117
0114
18.28.4
Code
1881
0761

Description
Unit

MATERIAL
Spun yarn
0.20x10=2.00 kg
Fuel wood
Kerosene oil
Sundries
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 joints
Cost of one joint
Say
Quantity
Rate
Amount
kilogram
2.00
50.00
100.00
quintal
litre
L.S.
L.S.
0.37
0.76
9.49
9.49
500.00
45.00
1.73
1.73
185.00
34.20
16.42
16.42
day
day
day
1.50
1.50
3.00
487.00
448.00
368.00
730.50
672.00
1104.00
2858.54
28.59
2887.13
433.07
3320.20
332.02
332.00
Unit
Quantity

Description
MATERIAL
Spun yarn
0.23x10=2.30 kg
Fuel wood
Kerosene oil
Sundries
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 joints
Cost of one joint
Say
Rate
Amount
kilogram
2.30
50.00
115.00
quintal
litre
L.S.
L.S.
0.42
0.76
10.79
10.79
500.00
45.00
1.73
1.73
210.00
34.20
18.67
18.67
day
day
day
1.50
1.50
3.00
487.00
448.00
368.00
730.50
672.00
1104.00
2903.04
29.03
2932.07
439.81
3371.88
337.18
337.20
Unit
Quantity

Description
MATERIAL
Spun yarn
0.3x10=3.00 kg
Fuel wood
1212
Rate
Amount
kilogram
3.00
50.00
150.00
quintal
0.56
500.00
280.00
Code
Description
Unit
Quantity
0771
9999
9977
Kerosene oil
Sundries
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 joints
Cost of one joint
Say
litre
L.S.
L.S.
0.76
13.52
13.52
45.00
1.73
1.73
34.20
23.39
23.39
day
day
day
2.00
2.00
4.00
487.00
448.00
368.00
974.00
896.00
1472.00
3852.98
38.53
3891.51
583.73
4475.24
447.52
447.50
Unit
Quantity
0116
0117
0114
18.28.5
Code
1881
0761
0771
9999
9977
0116
0117
0114
18.28.6
Code
1881
0761
0771
9999
9977
Rate
Amount

Description
MATERIAL
Spun yarn
0.4x10=4 00 kg
Fuel wood
Kerosene oil
Sundries
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 joints
Cost of one joint
Say
Rate
Amount
kilogram
4.00
50.00
200.00
quintal
litre
L.S.
L.S.
0.65
1.14
17.55
17.55
500.00
45.00
1.73
1.73
325.00
51.30
30.36
30.36
day
day
day
2.50
2.50
5.00
487.00
448.00
368.00
1217.50
1120.00
1840.00
4814.52
48.15
4862.67
729.40
5592.07
559.20
559.20
Unit
Quantity

Description
MATERIAL
Spun yarn
0.54x10 =5.40 kg
Fuel wood
Kerosene oil
Sundries
1213
Rate
Amount
kilogram
5.40
50.00
270.00
quintal
litre
L.S.
L.S.
0.75
1.52
20.28
20.28
500.00
45.00
1.73
1.73
375.00
68.40
35.08
35.08
Code
0116
0117
0114
18.28.7
Code
1881
0761
0771
9999
9977
0116
0117
0114
18.28.8
Code
1881
0761
0771
9999
9977
0116
0117
Description
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 joints
Cost of one joint
Say
Unit
Quantity
day
day
day
3.00
3.00
6.00
Unit
Quantity
Rate
487.00
448.00
368.00
Amount
1461.00
1344.00
2208.00
5796.56
57.97
5854.53
878.18
6732.71
673.27
673.25

Description
MATERIAL
Spun yarn
0.62x10=6.20 kg
Fuel wood
Kerosene oil
Sundries
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 joints
Cost of one joint
Say
Rate
Amount
kilogram
6.20
50.00
310.00
quintal
litre
L.S.
L.S.
0.93
1.70
24.18
24.18
500.00
45.00
1.73
1.73
465.00
76.50
41.83
41.83
day
day
day
3.00
3.00
6.00
487.00
448.00
368.00
1461.00
1344.00
2208.00
5948.16
59.48
6007.64
901.15
6908.79
690.87
690.85
Unit
Quantity

Description
MATERIAL
Spun yarn
Fuel wood
0.74x10=7.40 kg
Kerosene oil
Sundries
LABOUR
Fitter (grade 1)
1214
Rate
Amount
kilogram
quintal
7.40
1.12
50.00
500.00
370.00
560.00
litre
L.S.
L.S.
1.70
26.91
26.91
45.00
1.73
1.73
76.50
46.55
46.55
day
day
4.00
4.00
487.00
448.00
1948.00
1792.00
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 10 joints
Cost of one joint
Say
day
8.00
Unit
Quantity
18.28.9
Code
1881
0761
0771
9999
9977
0116
0117
0114
18.28.10
Code
1881
0761
0771
9999
9977
0116
0117
Rate
368.00
Amount
2944.00
7783.60
77.84
7861.44
1179.22
9040.66
904.06
904.05

Description
MATERIAL
Spun yarn
0.79x10=7.90 kg
Fuel wood
Kerosene oil
Sundries
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 joints
Cost of one joint
Say
Rate
Amount
kilogram
7.90
50.00
395.00
quintal
litre
L.S.
L.S.
1.21
2.27
31.07
31.07
500.00
45.00
1.73
1.73
605.00
102.15
53.75
53.75
day
day
day
4.50
4.50
9.00
487.00
448.00
368.00
2191.50
2016.00
3312.00
8729.15
87.29
8816.44
1322.47
10138.91
1013.89
1013.90
Unit
Quantity

Description
MATERIAL
Spun yarn
0.85x10=8.50 kg
Fuel wood
Kerosene oil
Sundries
LABOUR
Fitter (grade 1)
1215
Rate
Amount
kilogram
8.50
50.00
425.00
quintal
litre
L.S.
L.S.
1.31
2.27
33.67
33.67
500.00
45.00
1.73
1.73
655.00
102.15
58.25
58.25
day
day
4.75
4.75
487.00
448.00
2313.25
2128.00
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 10 joints
Cost of one joint
Say
day
9.50
Unit
Quantity
18.28.11
Code
1881
0761
0771
9999
9977
0116
0117
0114
18.29
Code
1397
2341
Rate
368.00
Amount
3496.00
9235.90
92.36
9328.26
1399.24
10727.50
1072.75
1072.75

Description
MATERIAL
Spun yarn
1.02x10=10.20 kg
Fuel wood
Kerosene oil
Sundries
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 joints
Cost of one joint
Say
Rate
Amount
kilogram
10.20
50.00
510.00
quintal
litre
L.S.
L.S.
1.68
2.84
40.30
40.30
500.00
45.00
1.73
1.73
840.00
127.80
69.72
69.72
day
day
day
6.50
6.50
13.00
487.00
448.00
368.00
3165.50
2912.00
4784.00
12478.74
124.79
12603.53
1890.53
14494.06
1449.40
1449.40
Unit
Quantity
Supplying pig lead at site of work.

Description
MATERIAL
Pig lead
Carriage of Pig lead
TOTAL
TOTAL
Cost of one quintal
Say
1216
kilogram
tonne
100.00
0.10
Rate
138.00
92.24
Amount
13800.00
9.22
13809.22
138.09
13947.31
2092.10
16039.41
16039.40
18.30
Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including
testing of joints :
18.30.1
80 mm diameter pipe
Code
1373
1956
9977
0116
0117
0114
18.30.2
Code
1374
1956
9977
0116
0117
0114
18.30.3
Code
1375
1957
9977
0116
0117
Description
MATERIAL
Bolts and nuts 16 mm dia 60 mm long
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
Unit
Quantity
Rate
Amount
each
each
L.S.
10.00
40.00
2.73
15.00
11.00
1.73
150.00
440.00
4.72
day
day
day
0.15
0.15
0.80
487.00
448.00
368.00
73.05
67.20
294.40
1029.37
10.29
1039.66
155.95
1195.61
119.56
119.55
Unit
Quantity
each
each
L.S.
10.00
80.00
4.16
18.00
11.00
1.73
180.00
880.00
7.20
day
day
day
0.25
0.25
1.00
487.00
448.00
368.00
121.75
112.00
368.00
1668.95
16.69
1685.64
252.85
1938.49
193.84
193.85
Unit
Quantity
each
each
L.S.
10.00
80.00
4.16
20.00
12.00
1.73
200.00
960.00
7.20
day
day
0.25
0.25
487.00
448.00
121.75
112.00

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
Rate
Amount

Description
MATERIAL
LABOUR
Fitter (grade 1)
1217
Rate
Amount
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
day
1.00
Unit
Quantity
each
each
L.S.
10.00
80.00
4.16
20.00
15.00
1.73
200.00
1200.00
7.20
day
day
day
0.30
0.30
1.10
487.00
448.00
368.00
146.10
134.40
404.80
2092.50
20.93
2113.43
317.01
2430.44
243.04
243.05
Unit
Quantity
each
each
L.S.
10.00
80.00
4.16
25.00
17.00
1.73
250.00
1360.00
7.20
day
day
day
0.30
0.30
1.10
487.00
448.00
368.00
146.10
134.40
404.80
2302.50
23.03
2325.53
348.83
2674.36
267.43
267.45
18.30.4
Code
1376
1958
9977
0116
0117
0114
18.30.5
Code
1377
1959
9977
0116
0117
0114
Rate
368.00
Amount
368.00
1768.95
17.69
1786.64
268.00
2054.64
205.46
205.45

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
Rate
Amount

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
1218
Rate
Amount
18.30.6
Code
1378
1960
9977
0116
0117
0114
18.30.7
Code
1379
1960
9977
0116
0117
0114
18.30.8
Code
1380
1961
9977
0116
0117

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
Unit
Quantity
Rate
Amount
each
each
L.S.
10.00
120.00
5.33
40.00
16.00
1.73
400.00
1920.00
9.22
day
day
day
0.40
0.40
1.30
487.00
448.00
368.00
194.80
179.20
478.40
3181.62
31.82
3213.44
482.02
3695.46
369.54
369.55
Unit
Quantity
each
each
L.S.
10.00
120.00
5.33
45.00
16.00
1.73
450.00
1920.00
9.22
day
day
day
0.40
0.40
1.30
487.00
448.00
368.00
194.80
179.20
478.40
3231.62
32.32
3263.94
489.59
3753.53
375.35
375.35
Unit
Quantity
each
each
L.S.
10.00
160.00
5.33
50.00
18.00
1.73
500.00
2880.00
9.22
day
day
0.50
0.50
487.00
448.00
243.50
224.00

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
Rate
Amount

Description
MATERIAL
LABOUR
Fitter (grade 1)
1219
Rate
Amount
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
day
1.50
Unit
Quantity
each
each
L.S.
10.00
160.00
8.06
73.00
28.00
1.73
730.00
4480.00
13.94
day
day
day
0.50
0.50
1.50
487.00
448.00
368.00
243.50
224.00
552.00
6243.44
62.43
6305.87
945.88
7251.75
725.17
725.15
Unit
Quantity
each
each
L.S.
10.00
200.00
8.06
92.00
28.00
1.73
920.00
5600.00
13.94
day
day
day
0.60
0.60
1.70
487.00
448.00
368.00
292.20
268.80
625.60
7720.54
77.21
7797.75
1169.66
8967.41
896.74
896.75
18.30.9
Code
1381
1962
9977
0116
0117
0114
18.30.10
Code
1382
1962
9977
0116
0117
0114
Rate
368.00
Amount
552.00
4408.72
44.09
4452.81
667.92
5120.73
512.07
512.05

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
Rate
Amount

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
1220
Rate
Amount
18.30.11
Code
1383
1963
9977
0116
0117
0114
18.30.12
Code
1384
1964
9977
0116
0117
0114

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 joints
Cost for one joint
Say
Unit
Quantity
Rate
Amount
each
each
L.S.
10.00
200.00
8.06
110.00
32.00
1.73
1100.00
6400.00
13.94
day
day
day
0.65
0.65
1.80
487.00
448.00
368.00
316.55
291.20
662.40
8784.09
87.84
8871.93
1330.79
10202.72
1020.27
1020.25
Unit
Quantity
each
each
L.S.
10.00
200.00
9.49
125.00
38.00
1.73
1250.00
7600.00
16.42
day
day
day
0.75
0.75
2.00
487.00
448.00
368.00
365.25
336.00
736.00
10303.67
103.04
10406.71
1561.01
11967.72
1196.77
1196.75

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for 10 joints
Cost for one joint
Say
Rate
Amount
18.31
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts,
rubber insertions etc. (the tail pieces if required will be paid separately) :
18.31.1
100 mm diameter
18.31.1.1
Class I
Code
1940
Description
Details of cost for 10 sluice valves
MATERIAL
C.I.sluice valve (with caps) class I :
100 mm dia
Carriage of sluice valves
wt.= 44.3x10=443kg= 0.443t. say 0.44t
1221
Unit
Quantity
each
10.00
Rate
2410.00
Amount
24100.00
Code
Description
2309

LABOUR for laying sluice valve
(Rate as per item No. 18.24 Of SH: Water
Supply)
Providing flanged joints to sluice valves
with bolts, nuts and rubber insertion etc.
(Rate as per item No.18.30.2 Of SH: Water
Supply)
TOTAL
i.e. on (29276.60 - 5136.01) = 24140.59
TOTAL
= 24382.00
Cost of 10 valves
Cost of 1 valve
Say
18.24
18.30.2
18.31.1.2
Code
3311
2309
18.24
18.30.2
Unit
Quantity
Rate
tonne
0.44
quintal
4.43
284.20 1259.01(A)
each
20.00
193.85 3877.00(A)
29276.60
92.24
Amount
40.59
241.41
29518.01
3657.30
33175.31
3317.53
3317.55
Class II
Description
MATERIAL
C.I.sluice valve (with caps) class II :
100 mm dia
56.3x10=563kg= 0.563t=0.56t
Supply)
Supply)
TOTAL
i.e. on (32528.70 - 5477.05) = 27051.65
TOTAL
= 27322.17
Cost of 10 valves
Cost of 1 valve
Say
1222
Unit
Quantity
Rate
Amount
each
10.00
2700.00
27000.00
tonne
0.56
92.24
51.65
quintal
5.63
284.20 1600.05(A)
each
20.00
193.85 3877.00(A)
32528.70
270.52
32799.22
4098.33
36897.55
3689.75
3689.75
18.31.2
125 mm diameter
18.31.2.1
Class I
Code
1941
2309
18.24
18.30.3
18.31.2.2
Code
3314
2309
18.24
18.30.3
Description
MATERIAL
125 mm dia
wt. = 56.3x10=563kg = 0.563t. say 0.56t
Supply)
(Rate as per item No.18.30.3 Of
SH: Water Supply)
TOTAL
i.e. on (31760.70 - 5709.05) = 26051.65
TOTAL
- 5709.05) = 26312.17
Cost of 10 valves
Cost of 1 valve
Say
Unit
Quantity
Rate
Amount
each
10.00
2600.00
26000.00
tonne
0.56
92.24
51.65
quintal
5.63
284.20 1600.05(A)
each
20.00
205.45 4109.00(A)
31760.70
260.52
32021.22
3946.83
35968.05
3596.80
3596.80
Class II
Description
MATERIAL
125 mm dia
wt. = 68.3x10=683kg = 0.68t say 0.68t
Supply)
SH: Water Supply)
TOTAL
i.e. on (38112.81 - 6050.09) = 32062.72
TOTAL
- 6050.09) = 32383.35
Cost of 10 valves
Cost of 1 valve
Say
1223
Unit
Quantity
Rate
Amount
each
10.00
3200.00
32000.00
tonne
0.68
92.24
62.72
quintal
6.83
284.20 1941.09(A)
each
20.00
205.45 4109.00(A)
38112.81
320.63
38433.44
4857.50
43290.94
4329.09
4329.10
18.31.3
150 mm diameter
18.31.3.1
Class I
Code
1942
2309
18.24
18.30.4
18.31.3.2
Code
3317
2309
18.24
18.30.4
Description
MATERIAL
150 mm dia
wt. = 72.5x10=725kg = 0.725t. say 0.72t
Supply)
Supply)
TOTAL
i.e. on (42987.86 - 6921.45) = 36066.41
TOTAL
- 6921.45) = 36427.07
Cost of 10 valves
Cost of 1 valve
Say
Unit
Quantity
Rate
Amount
each
10.00
3600.00
36000.00
tonne
0.72
92.24
66.41
quintal
7.25
284.20 2060.45(A)
each
20.00
243.05 4861.00(A)
42987.86
360.66
43348.52
5464.06
48812.58
4881.25
4881.25
Class II
Description
MATERIAL
150 mm dia
wt. = 86.5x10=865kg = 0.865t. say 0.865t
Supply)
Supply)
TOTAL
i.e. on (47399.12 - 7319.33) = 40079.79
TOTAL
- 7319.33) = 40480.59
Cost of 10 valves
Cost of 1 valve
Say
1224
Unit
Quantity
Rate
Amount
each
10.00
4000.00
40000.00
tonne
0.87
92.24
79.79
quintal
8.65
284.20 2458.33(A)
each
20.00
243.05 4861.00(A)
47399.12
400.80
47799.92
6072.09
53872.01
5387.20
5387.20
18.31.4
200 mm diameter
18.31.4.1
Class I
Code
1943
2309
18.24
18.30.5
18.31.4.2
Code
3320
2309
18.24
18.30.5
Description
MATERIAL
200 mm dia
wt. = 121.5x10=1215kg = 1.215t. say 1.22t
Supply)
Supply)
TOTAL
i.e. on (83914.56 - 8802.03) = 75112.53
TOTAL
= 75863.66
Cost of 10 valves
Cost of 1 valve
Say
Unit
Quantity
Rate
Amount
each
10.00
7500.00
75000.00
tonne
1.22
92.24
112.53
quintal
12.15
284.20 3453.03(A)
each
20.00
267.45 5349.00(A)
83914.56
751.13
84665.69
11379.55
96045.24
9604.52
9604.50
Class II
Description
MATERIAL
200 mm dia
wt. = 150.5x10=1505 kg = 1.5 t. say 1.5 t
Supply)
Supply)
TOTAL
i.e. on (98764.57 - 9626.21) = 89138.36
TOTAL
= 90029.74
Cost of 10 valves
Cost of 1 valve
Say
1225
Unit
Quantity
Rate
Amount
each
10.00
8900.00
89000.00
tonne
1.50
92.24
138.36
quintal
15.05
284.20 4277.21(A)
each
20.00
267.45 5349.00(A)
98764.57
891.38
99655.95
13504.46
113160.41
11316.04
11316.05
18.31.5
250 mm diameter
18.31.5.1
Class I
Code
1944
2309
18.24
18.30.6
18.31.5.2
Code
3321
2309
18.24
18.30.6
Description
MATERIAL
250 mm dia
wt. = 179.9x10=1799kg = 1.799t. say 1.80t
Supply)
Supply)
TOTAL
i.e. on (122469.79 - 12503.76) = 109966.03
TOTAL
- 12503.76) = 111065.69
Cost of 10 valves
Cost of 1 valve
Say
Unit
Quantity
Rate
Amount
each
10.00
10980.00
109800.00
tonne
1.80
92.24
166.03
quintal
17.99
284.20 5112.76(A)
each
20.00
369.55 7391.00(A)
122469.79
1099.66
123569.45
16659.85
140229.30
14022.93
14022.95
Class II
Description
MATERIAL
250 mm dia
wt. = 229.9x10=2299kg = 2299t. say 2.30t
Supply)
Supply)
TOTAL
i.e. on (159136.91 - 13924.76) = 145212.15
TOTAL
- 13924.76) = 146664.27
Cost of 10 valves
Cost of 1 valve
Say
1226
Unit
Quantity
Rate
Amount
each
10.00
14500.00
145000.00
tonne
2.30
92.24
212.15
quintal
22.99
284.20 6533.76(A)
each
20.00
369.55 7391.00(A)
159136.91
1452.12
160589.03
21999.64
182588.67
18258.86
18258.85
18.31.6
300 mm diameter
18.31.6.1
Class I
Code
1945
2309
18.24
18.30.7
18.31.6.2
Code
3326
2309
18.24
18.30.7
Description
MATERIAL
300 mm dia
wt. = 242.4x10=2424kg = 2.424t. say 2.42t
Supply)
Supply)
TOTAL
i.e. on (169619.23 - 14396.01) = 155223.22
TOTAL
- 14396.01) = 156775.45
Cost of 10 valves
Cost of 1 valve
Say
Unit
Quantity
Rate
Amount
each
10.00
15500.00
155000.00
tonne
2.42
92.24
223.22
quintal
24.24
284.20 6889.01(A)
each
20.00
375.35 7507.00(A)
169619.23
1552.23
171171.46
23516.32
194687.78
19468.77
19468.75
Class II
Description
MATERIAL
300 mm dia
wt. = 303.4x10=3034kg = 3.304t.
Supply))
Supply))
TOTAL
i.e. on (198409.48 - 16129.63) = 182279.85
TOTAL
- 16129.63) = 184102.65
Cost of 10 valves
Cost of 1 valve
Say
1227
Unit
Quantity
Rate
Amount
each
10.00
18200.00
182000.00
tonne
3.03
92.24
279.85
quintal
30.34
284.20 8622.63(A)
each
20.00
375.35 7507.00(A)
198409.48
1822.80
200232.28
27615.40
227847.68
22784.76
22784.75
18.32
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement

mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box
100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine
sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering
with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a
floating coat of neat cement complete as per standard design :
18.32.1
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Code
2.8.1
2.25
4.1.11
6.1.1
13.9.1
1304
9977
5.3
0115
Description
Details of cost for one chamber
MATERIAL
(i) Earth work in excavation including
refilling and disposal of surplus earth
0.68x0.68x0.65m=0.301cum.
(Rate as per item no. 2.8.1 of SH: Earth
work)
Rate as per item No.2.25
(ii) Cement concrete 1:5:10 (1 Cement : 5
fine sand : 10 graded stone aggregate
40mm nominal size)
0.68x0.68x0.075m=0.035cum. Say 0.04 cum.
work
(iii) Second class brick work in cement
mortar 1:4 (1 Cement : 4 coarse sand) in
foundations and plinth
1.66mx0.115x0.50m=0.095cum.
Say 0.10 cum.
Rate as per item no 6.1.1 of SH : Brick Work
(iv) 12mm cement plaster 1:3 (1 Cement : 3
Coarse sand) finished with a floating coat
of neat cement.
1.20x0.50=0.60sqm
0.30x0.30=0.09sqm.
Total =0.69sqm. Say 0.70sqm.
Surface box for stop cock
(vi)
Carriage of C.I. surface box
(vii) Cement concrete 1:2:4 (1 Cement : 2
Coarse sand ; 4 graded stone aggregate
20mm nominal size)
in slab = 0.53mx0.53mx0.075m =
0.02107cum.
Less surface box 0.112x0.112x0.076
=(-)0.00094 cum.
= 0.0201 cum. Say 0.02cum.
Rate as per item No.5.3 SH : R.C.C
(viii) Less labour for not lifting the materilas
upto floor five level
Coolie
(ix)
1228
Unit
Quantity
Rate
Amount
cum
cum
0.30
0.30
166.40
125.75
49.92(A)
37.73(A)
cum
0.04
3959.70
158.39(A)
cum
0.10
4970.30
497.03(A)
sqm
each
0.70
1.00
234.70
125.00
164.29(A)
125.00
L.S.
1.43
1.73
2.47
cum
0.02
7390.80
147.82(A)
day
-0.04
368.00
-13.98
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
i.e. on (1175.87 - 1055.18) = 120.69
TOTAL
- 1055.18) = 121.90
Cost of one manhole
Say
L.S.
4.16
Rate
1.73
Amount
7.20
1175.87
1.21
1177.08
18.29
1195.37
1195.35
18.33

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box
100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with
chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation
concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm
nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse
sand) 12 mm thick, finished with a floating coat of neat cement complete as
per standard design :
18.33.1
Code
2.8.1
2.25
4.1.11
6.1.1
13.9.1
Description
MATERIAL
1.21x1.21x1.00m=1.464cum.
Say 1.46 cum.
Rate as per item No.2.25 of SH: Earth Work
40mm nominal size)
1.21x1.21x0.1m=0.146cum. Say 0.15 cum.
Work
mortar 1: 4(1 Cement : 4coarse sand) in
3.32mx0.23mx0.75m=0.573cum.
Say 0.57 cum.
(iv) 12mm cement plaster 1:3 (1 Cement :
3 Coarse sand) finished with a floating coat
of neat cement.
2.40x0.75=1.80sqm.
0.60x0.60=0.36sqm.
Total = 2.16sqm.
(v) C.I. surface box with hinged cover
100x100x75mm (inside)
1229
Unit
Quantity
Rate
Amount
cum
cum
1.46
1.46
166.40
125.75
242.94(A)
183.60(A)
cum
0.15
3959.70
593.96(A)
cum
0.57
4970.30
2833.07(A)
sqm
2.16
234.70
506.95(A)
Code
Description
1305
Surface box for sluice valve

(vi)
Carriage of C.I. surface box
20mm nominal size)
in slab = 1.06mx1.06mx0.15m = 0.1685 cum.
Less surface box 3.142/4xd2x0.18m -0.7854x0.156mx0.156mx0.18 =
(-)0.0034 cum.
= 0.1651 cum. Say 0.17 cum.
Rate as per item No.5.3 Of SH: RCC
Coolie
(ix) Mild steel reinforcement for RCC
work etc.
0.165cum.x80kg/cum. = 13.2kg
(x) Form work 0.60mx0.60m=0.36sqm.+
3.32mx0.15m=0.50sqm.
= 0.86 sqm.
Rate as per item No.5.9.3 Of SH: RCC
(xi)
Sundries
TOTAL
i.e. on (6830.22 - 6710.10) = 120.12
TOTAL
- 6710.10) = 121.32
Cost of one manhole
Say
9977
5.3
0115
5.22.1
5.9.3
9999
Unit
Quantity
Rate
Amount
each
1.00
210.00
210.00
L.S.
8.06
1.73
13.94
cum
0.17
day
-0.32
368.00
-117.76
kg
13.20
55.30
729.96(A)
sqm
0.86
422.30
363.18(A)
L.S.
8.06
1.73
13.94
6830.22
7390.80 1256.44(A)
1.20
6831.42
18.20
6849.62
6849.60
18.34

100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with
chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation
nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse
sand) 12 mm thick, finished with a floating coat of neat cement complete as
per standard design :
18.34.1
Code
Description
Unit

MATERIAL
1230
Quantity
Rate
Amount
Code
2.8.1
2.25
4.1.11
6.1.1
13.9.1
1305
9977
5.3
0115
5.22.1
5.9.3
9999
Description
1.51X1.51X1.25M
= 2.85cum.
Rate as per item No.2.25 of SH: Earth work
(ii) Cement concrete 1:5:10 (1 Cement :
5 fine sand : 10 graded stone aggregate
40mm nominal size)
1.51x1.51x0.1m=0.228cum. Say 0.23 cum.
Work
mortar 1:4 (1 Cement : 4coarse sand) in
4.52mx0.23mx1.00m=1.04cum.
of neat cement.
3.60mx1.00m=3.60sqm.0.90mx0.90m
=0.81sqm.
Total=4.41sqm.
(v) C.I. surface box with chained lid.
(vi) Carriage of C.I. surface box
(vii) Cement concrete 1:2:4 (1 Cement :
2 Coarse sand ; 4 graded stone aggregate
20mm nominal size)
in slab = 1.36mx1.36mx0.15m = 0.2774 cum.
Less surface box 0.7854x0.156mx0.156mx
0.18m = (-)0.0034 cum.
= 0.2740 cum. Say 0.27 cum.
Coolie
(ix) Mild steel reinforcement for RCC work
etc.
0.274cum.x80kg/cum. = 21.92 kg.
Rate as per item no. 5.22.1 of SH : RCC
work
(x) Form work
0.90mx0.90m=0.81sqm.+
4.52mx0.15m = 0.68 sqm.
Total= 1.49 sqm.
(xi)
Sundries
TOTAL
i.e. on (11834.63 - 11784.43) = 50.20
TOTAL
- 11784.43) = 50.70
Cost of one manhole
Say
1231
Unit
Quantity
Rate
Amount
cum
cum
2.85
2.85
166.40
125.75
474.24(A)
358.39(A)
cum
0.23
3959.70
910.73(A)
cum
1.04
4970.30
5169.11(A)
sqm
4.41
234.70
1035.03(A)
each
L.S.
1.00
8.06
210.00
1.73
210.00
13.94
cum
0.27
day
-0.51
kg
21.92
sqm
1.49
422.30
629.23(A)
L.S.
8.06
1.73
13.94
11834.63
7390.80 1995.52(A)
368.00
-187.68
55.30 1212.18(A)
0.50
11835.13
7.61
11842.74
11842.75
18.35

100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside)
with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) , i/c necessary excavation,
foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate
40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :
3 coarse sand) 12 mm thick, finished with a floating coat of neat cement
complete as per standard design :
18.35.1
Code
2.8.1
2.25
4.1.11
6.1.1
13.9.1
1305
9977
5.3
0115
Description
MATERIAL
1.81X1.81X1.25M
40mm nominal size)
1.81x1.81x0.1m=0.328cum. Say 0.33 cum.
Work
mortar 1:4 (1 Cement : 4coarse sand) in
5.72mx0.23mx1.00m=1.316cum.
Say 1.32 cum.
(iv) 12mm cement plaster 1:3 (1 Cement : 3
Coarse sand) finished with a floating coat
of neat cement.
4.80mx1.00m=4.80sqm.
1.20mx1.20m=1.44sqm.
Total=6.42sqm.
(v) C.I. surface box with chained lid
20mm nominal size)
in slab = 1.66mx1.66mx0.15m = 0.4133 cum.
Less surface box 0.7854x0.156mx
0.156mx0.18m = (-)0.0034 cum.
Total= 0.4099 cum. Say 0.41 cum.
Coolie
(ix) Mild steel reinforcement for RCC slab
steel @ 80kg/cum.
0.41cum.x80kg/cum. = 32.80kg.
1232
Unit
Quantity
Rate
cum
cum
4.10
4.10
cum
0.33
3959.70 1306.70(A)
cum
1.32
4970.30
6560.80(A)
sqm
6.42
234.70
1506.77(A)
each
L.S.
1.00
8.06
210.00
1.73
210.00
13.94
cum
0.41
day
-0.77
166.40
125.75
Amount
682.24(A)
515.58(A)
7390.80 3030.23(A)
368.00
-283.36
Code
Description
5.22.1

work
(x) Form work
1.20mx1.20m=1.44sqm.+
5.72mx0.15m=0.86 sqm.
Total = 2.30sqm.
(xi)
Sundries
TOTAL
i.e. on (16341.97 - 16387.45) = -45.48
TOTAL
- 16387.45) = -45.93
Cost of one manhole
Say
5.9.3
9999
Unit
Quantity
Rate
Amount
kg
32.80
sqm
2.30
422.30
971.29(A)
L.S.
8.06
1.73
13.94
16341.97
55.30 1813.84(A)
-0.45
16341.52
-6.89
16334.63
16334.65
18.36
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box
350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab
1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine
sand:10 graded stone aggregate 40 mm nominal size) and inside plastering
with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with
a floating coat of neat cement complete as per standard design :
18.36.1
Code
2.8.1
2.25
4.1.11
Description
MATERIAL
1.21X1.21X1.00M
= 1.464cum. Say 1.46cum.
40mm nominal size)
1.21x1.21x0.1m=0.146cum. Say 0.15 cum.
Work
3.32mx0.23mx0.75m=0.573cum.
Say 0.57 cum.
1233
Unit
Quantity
Rate
Amount
cum
cum
1.46
1.46
166.40
125.75
242.94(A)
183.60(A)
cum
0.15
3959.70
593.96(A)
Code
Description
Unit
Quantity
6.1.1

of neat cement.
2.40mx0.75m=1.80sqm.0.90mx0.90m
=0.36sqm. Total=2.16sqm.
(v) C.I. surface box with chained lid
20mm nominal size)
in slab = 1.06mx1.06mx0.15m = 0.1685 cum.
Less surface box 0.61x0.41mx0.15m=
(-)0.0375 cum.
= 0.131 cum. Say 0.13 cum.
Coolie
(ix) Mild steel reinforcement for RCC work etc.
0.131cumx80kg/cum. = 10.48kg.
work
(x) Form work
0.60mx0.60m=0.36sqm.+
3.32mx0.15m = 0.50 sqm.
Total =0.86 sqm.
(xi)
Sundries
TOTAL
i.e. on (6492.77 - 6264.04) = 228.73
TOTAL
- 6264.04) = 231.02
Cost of one manhole
Say
cum
13.9.1
1305
9977
5.3
0115
5.22.1
5.9.3
9999
18.37
Rate
Amount
0.57
4970.30
2833.07(A)
sqm
2.16
234.70
506.95(A)
each
L.S.
1.00
53.82
210.00
1.73
210.00
93.11
cum
0.13
7390.80
960.80(A)
day
-0.24
368.00
-88.32
kg
10.48
55.30
579.54(A)
sqm
0.86
422.30
363.18(A)
L.S.
8.06
1.73
13.94
6492.77
2.29
6495.06
34.65
6529.71
6529.70

mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I.
double flap surface box 400x200x200 mm (inside) with locking arrangement
and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) , i/c necessary excavation, foundation
concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm
nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3
coarse sand) 12 mm thick, finished with a floating coat of neat cement
1234
18.37.1
Code
2.8.1
2.25
4.1.11
6.1.1
13.9.1
1307
9977
5.3
0115
5.22.1
5.9.3
Description
MATERIAL
1.21X1.06X0.85M
= 1.09cum.
40mm nominal size)
1.21x1.06x0.1m=0.128cum. Say 0.13 cum.
Work
3.02mx0.23mx0.50m=0.347cum.
Say 0.35 cum.
of neat cement.
2.10mx0.50m=1.05sqm.
0.60mx0.45m=0.27sqm.
Total=1.32sq
(v) C.I. surface box 400x200x200mm
(inside) with locking arrangement
Surface box for water meter
(vii) Cement concrete 1:2:4 (1 Cement :
2 Coarse sand ; 4 graded stone aggregate
20mm nominal size)
in slab = 1.06mx0.91mx0.25m = 0.241 cum.
Less surface box 0.42x0.22mx0.2m
= (-)0.018 cum.
= 0.223 cum. Say 0.22 cum.
Coolie
(ix) Mild steel reinforcement for RCC work
steel @ 80kg/cum.
0.223cum.x80kg/cum. = 17.84 kg.
(x) Form work
0.60mx0.45m=0.27sqm.+
3.02mx0.25m=0.76sqm.
Total = 1.03sqm.
(xi)
1235
Unit
Quantity
Rate
Amount
cum
cum
1.09
1.09
166.40
125.75
181.38(A)
137.07(A)
cum
0.13
3959.70
514.76(A)
cum
0.35
4970.30
1739.61(A)
sqm
1.32
234.70
309.80(A)
each
L.S.
1.00
13.52
250.00
1.73
250.00
23.39
cum
0.22
day
-0.41
368.00
-150.88
kg
17.84
55.30
986.55(A)
sqm
1.03
422.30
434.97(A)
7390.80 1625.98(A)
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
i.e. on (6066.57 - 5930.12) = 136.45
TOTAL
= 137.81
Cost of one manhole
Say
L.S.
8.06
Rate
1.73
Amount
13.94
6066.57
1.36
6067.93
20.67
6088.60
6088.60
18.38
Painting G.I. pipes and fittings with synthetic enamel white paint with two
coats over a ready mixed priming coat, both of approved quality for new
work :
18.38.1
15 mm diameter pipe
Code
13.50.3
13.61.1
9999
18.38.2
Code
13.50.3
13.61.1
Description
Perimeter = 0.0673 metre
Area=10x0.0673m = 0.673sqm.
Priming coatRate as per item no 13.50.3 of SH : Finishing
Painting two coats excluding priming coat
with white paint on new work.
Add for delay
TOTAL
i.e. on (95.73 - 72.34) = 23.39
TOTAL
= 23.62
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
Rate
Amount
sqm
0.673
29.10
19.58(A)
sqm
L.S.
0.673
13.52
78.40
1.73
52.76(A)
23.39
95.73
0.23
95.96
3.54
99.50
9.95
9.95
20 mm diameter pipe
Description
Area = 10x0.0845 sqm. = 0.845 sqm.
1236
Unit
Quantity
Rate
Amount
sqm
0.845
29.10
24.59(A)
sqm
0.845
78.40
66.25(A)
Code
Description
Unit
Quantity
9999
Add for delay

TOTAL
i.e. on (114.23 - 90.84) = 23.39
TOTAL
= 23.62
Cost of 10 metre
Cost of one metre
Say
L.S.
13.52
18.38.3
Code
13.50.3
13.61.1
9999
18.38.4
Code
13.50.3
13.61.1
Rate
1.73
Amount
23.39
114.23
0.23
114.46
3.54
118.00
11.80
11.80
25 mm diameter pipe
Description
Area = 10x0.1061 sqm. = 1.061 sqm.
Add for delay
TOTAL
i.e. on (149.14 - 114.06) = 35.08
TOTAL
= 35.43
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
Rate
Amount
sqm
1.061
29.10
30.88(A)
sqm
L.S.
1.061
20.28
78.40
1.73
83.18(A)
35.08
149.14
0.35
149.49
5.31
154.80
15.48
15.50
32 mm diameter pipe
Description
Area = 10x0.1334 sqm. = 1.334 sqm.
1237
Unit
Quantity
Rate
Amount
sqm
1.334
29.10
38.82(A)
sqm
1.334
78.40
104.59(A)
Code
Description
Unit
Quantity
9999
Add for delay

TOTAL
i.e. on (178.49 - 143.41) = 35.08
TOTAL
= 35.43
Cost of 10 metre
Cost of one metre
Say
L.S.
20.28
18.38.5
Code
13.50.3
13.61.1
9999
18.38.6
Code
13.50.3
13.61.1
Rate
1.73
Amount
35.08
178.49
0.35
178.84
5.31
184.15
18.41
18.40
40 mm diameter pipe
Description
Area = 10x0.1520 sqm. = 1.520 sqm.
Add for delay
TOTAL
i.e. on (209.95 - 163.40) = 46.55
TOTAL
= 47.02
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
Rate
Amount
sqm
1.52
29.10
44.23(A)
sqm
L.S.
1.52
26.91
78.40
1.73
119.17(A)
46.55
209.95
0.47
210.42
7.05
217.47
21.74
21.75
50 mm diameter pipe
Description
Area = 10x0.1894 sqm. = 1.894 sqm.
1238
Unit
Quantity
Rate
Amount
sqm
1.894
29.10
55.12(A)
sqm
1.894
78.40
148.49(A)
Code
Description
Unit
Quantity
9999
Add for delay

TOTAL
i.e. on (250.16 - 203.61) = 46.55
TOTAL
= 47.02
Cost of 10 metre
Cost of one metre
Say
L.S.
26.91
Rate
1.73
Amount
46.55
250.16
0.47
250.63
7.05
257.68
25.76
25.75
18.39
Repainting G.I. pipes and fittings with synthetic enamel white paint with one
coat of approved quality :
18.39.1
15 mm diameter pipe
Code
14.54.1
9999
18.39.2
Code
14.54.1
9999
Description
Painting one coat with white paint on old work.
to Building)
Add for delay
TOTAL
i.e. on (48.46 - 34.52) = 13.94
TOTAL
= 14.08
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
sqm
L.S.
0.673
8.06
Rate
51.30
1.73
Amount
34.52(A)
13.94
48.46
0.14
48.60
2.11
50.71
5.07
5.05
20 mm diameter pipe
Description
to Building)
Add for delay
TOTAL
i.e. on (57.29 - 43.35) = 13.94
TOTAL
= 14.08
Cost of 10 metre
Cost of one metre
Say
1239
Unit
Quantity
sqm
L.S.
0.845
8.06
Rate
51.30
1.73
Amount
43.35(A)
13.94
57.29
0.14
57.43
2.11
59.54
5.95
5.95
18.39.3
Code
14.54.1
9999
18.39.4
Code
14.54.1
9999
18.39.5
Code
14.54.1
9999
25 mm diameter pipe
Description
to Building)
Add for delay
TOTAL
i.e. on (73.10 - 54.43) = 18.67
TOTAL
= 18.86
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
sqm
L.S.
1.061
10.79
Rate
51.30
1.73
Amount
54.43(A)
18.67
73.10
0.19
73.29
2.83
76.12
7.61
7.60
32 mm diameter pipe
Description
to Building)
Add for delay
TOTAL
i.e. on (87.32 - 68.43) = 18.89
TOTAL
= 19.08
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
sqm
L.S.
1.334
10.92
Rate
51.30
1.73
Amount
68.43(A)
18.89
87.32
0.19
87.51
2.86
90.37
9.03
9.05
40 mm diameter pipe
Description
to Building)
Add for delay
TOTAL
i.e. on (101.37 - 77.98) = 23.39
TOTAL
= 23.62
Cost of 10 metre
Cost of one metre
Say
1240
Unit
Quantity
sqm
L.S.
1.52
13.52
Rate
51.30
1.73
Amount
77.98(A)
23.39
101.37
0.23
101.60
3.54
105.14
10.51
10.50
18.39.6
Code
14.54.1
9999
50 mm diameter pipe
Description
to Building)
Add for delay
TOTAL
i.e. on (120.55 - 97.16) = 23.39
TOTAL
= 23.62
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
sqm
L.S.
1.894
13.52
Rate
51.30
1.73
Amount
97.16(A)
23.39
120.55
0.23
120.78
3.54
124.32
12.43
12.45
18.40
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic
paint of approved quality :
18.40.1
15 mm diameter pipe
Code
13.65.1
9999
18.40.2
Code
13.65.1
Description
Painting with anti-corrosive paint two coats.
(Rate as per item No.13.65.1 sub-heads
finishing)
Add for delay
TOTAL
i.e. on (57.82 - 43.88) = 13.94
TOTAL
= 14.08
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
sqm
L.S.
0.673
8.06
Rate
65.20
1.73
Amount
43.88(A)
13.94
57.82
0.14
57.96
2.11
60.07
6.00
6.00
20 mm diameter pipe
Description
Unit
Quantity

finishing)
sqm
0.845
1241
Rate
65.20
Amount
55.09(A)
Code
Description
Unit
Quantity
9999
Add for delay

TOTAL
i.e. on (69.03 - 55.09) = 13.94
TOTAL
= 14.08
Cost of 10 metre
Cost of one metre
Say
L.S.
8.06
18.40.3
Code
13.65.1
9999
18.40.4
Code
13.65.1
9999
Rate
1.73
Amount
13.94
69.03
0.14
69.17
2.11
71.28
7.12
7.10
25 mm diameter pipe
Description
finishing)
Add for delay
TOTAL
i.e. on (87.85 - 69.18) = 18.67
TOTAL
= 18.86
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
sqm
L.S.
1.061
10.79
Rate
65.20
1.73
Amount
69.18(A)
18.67
87.85
0.19
88.04
2.83
90.87
9.08
9.10
32 mm diameter pipe
Description
finishing)
Add for delay
TOTAL
i.e. on (105.65 - 86.98) = 18.67
TOTAL
= 18.86
Cost of 10 metre
Cost of one metre
Say
1242
Unit
Quantity
sqm
L.S.
1.334
10.79
Rate
65.20
1.73
Amount
86.98(A)
18.67
105.65
0.19
105.84
2.83
108.67
10.86
10.85
18.40.5
Code
13.65.1
9999
18.40.6
Code
13.65.1
9999
18.40.7
Code
13.65.1
40 mm diameter pipe
Description
finishing)
Add for delay
TOTAL
i.e. on (120.24 - 99.10) = 21.14
TOTAL
= 21.35
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
sqm
L.S.
1.52
12.22
Rate
65.20
1.73
Amount
99.10(A)
21.14
120.24
0.21
120.45
3.20
123.65
12.36
12.35
50 mm diameter pipe
Description
finishing)
Add for delay
TOTAL
i.e. on (144.63 - 123.49) = 21.14
TOTAL
= 21.35
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
sqm
L.S.
1.894
12.22
Rate
65.20
1.73
Amount
123.49(A)
21.14
144.63
0.21
144.84
3.20
148.04
14.80
14.80
65 mm diameter pipe
Description
Unit
Quantity

finishing)
sqm
2.387
1243
Rate
65.20
Amount
155.63(A)
Code
Description
Unit
Quantity
9999
Add for delay

TOTAL
i.e. on (179.02 - 155.63) = 23.39
TOTAL
= 23.62
Cost of 10 metre
Cost of one metre
Say
L.S.
13.52
18.40.8
Code
13.65.1
9999
Rate
1.73
Amount
23.39
179.02
0.23
179.25
3.54
182.79
18.27
18.25
80 mm diameter pipe
Description
finishing)
Add for delay
TOTAL
i.e. on (207.94 - 182.30) = 25.64
TOTAL
= 25.90
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
sqm
L.S.
2.796
14.82
Rate
65.20
1.73
Amount
182.30(A)
25.64
207.94
0.26
208.20
3.89
212.09
21.20
21.20
18.41
Providing and filling sand of grading zone V or coarser grade, allround the
G.I. pipes in external work :
18.41.1
15 mm diameter pipe
Code
Description
Unit
Details of cost of sand filling alround 15mm

dia. pipe 10 metre long.
Width of sand filling = 300mm
Depth of sand filling
Under the pipe = 75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 21.8mm
= 246.8mm say 247mm
Quantity of sand = 10x0.30x0.247 =
0.744 cum.
Less for pipe = 3.142/4(21.8)x10 =
(-)0.004 cum.
= 0.74 cum.
1244
Quantity
Rate
Amount
Code
18.41.1A
18.41.1A
Code
6501
2335
0114
0115
18.41.2
Code
18.41.1A
Description
Rate as per Item Number 18.41.1A of
SH:Water supply
TOTAL
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
cum
0.74
Rate
902.90
Amount
668.15
668.15
668.15
66.81
66.80
Sub analysis item for sand filling component

Description
Sub analysis item for sand filling component
MATERIAL
Labour:
Beldar
Coolie
TOTAL
TOTAL
Cost of one cum.
Say
Unit
Quantity
Rate
Amount
cum
cum
1.00
1.00
600.00
103.77
600.00
103.77
day
day
0.09
0.11
368.00
368.00
33.12
40.48
777.37
7.77
785.14
117.77
902.91
902.90
Unit
Quantity
cum
0.75
20 mm diameter pipe
Description
Details of cost of sand filling alround
20mm dia. pipe 10 metre long.
= 252.3 Say 252mm
0.756 cum.+
Less for pipe =3.142/4(27.3)x10 =
(-)0.006cum.
= 0.750 cum
SH:Water supply
TOTAL
Cost of 10 metre
Cost of one metre
Say
1245
Rate
902.90
Amount
677.18(A)
677.18
677.18
67.71
67.70
18.41.3
Code
18.41.1A
18.41.4
Code
18.41.1A
18.41.5
Code
25 mm diameter pipe
Description
= 259.2 Say 259mm
0.777 cum.+
Less for pipe 3.142/4(34.2)x10 =
(-)0.009cum.
= 0.768 Say 0.77 cum.
SH:Water supply
TOTAL
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
cum
0.77
Unit
Quantity
cum
0.79
Unit
Quantity
Rate
902.90
Amount
695.23(A)
695.23
695.23
69.52
69.50
32 mm diameter pipe
Description
= 267.9 Say 268mm
0.804 cum.+
Less for pipe 3.142/4(42.9)x10 =
(-)0.014cum.
= 0.790 Say 0.79 cum.
SH:Water supply
TOTAL
Cost of 10 metre
Cost of one metre
Say
Rate
902.90
Amount
713.29(A)
713.29
713.29
71.32
71.30
40 mm diameter pipe
Description
1246
Rate
Amount
Code
18.41.1A
18.41.6
Code
18.41.1A
18.41.7
Code
Description
Unit

= 273.8 Say 274mm
0.82 cum.+
Less for pipe 3.142/4(48.8)x10 =
(-)0.014cum.
= 0.801 Say 0.80 cum.
SH:Water supply
TOTAL
Cost of 10 metre
Cost of one metre
Say
cum
Quantity
0.8
Rate
902.90
Amount
722.32(A)
722.32
722.32
72.23
72.25
50 mm diameter pipe
Description
= 285.8 Say 286mm
0.858 cum.+
Less for pipe 3.142/4(60.8)x10 =
(-)0.029cum.
= 0.829 Say 0.83 cum.
SH:Water supply
TOTAL
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
cum
0.83
Unit
Quantity
Rate
902.90
Amount
749.41(A)
749.41
749.41
74.94
74.95
65 mm diameter pipe
Description
1247
Rate
Amount
Code
18.41.1A
18.41.8
Code
18.41.1A
18.41.9
Code
Description
= 301.6 Say 302mm
1.359 cum.+
Less for pipe 3.142/4(76.6)x10 =
(-)0.046cum.
= 1.313 Say 1.31 cum.
SH:Water supply
TOTAL
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
cum
1.31
Unit
Quantity
cum
1.35
Unit
Quantity
Rate
902.90
Amount
1182.80(A)
1182.80
1182.80
118.28
118.30
80 mm diameter pipe
Description
= 314.9 Say 315mm
1.418 cum.+
Less for pipe 3.142/4(89.9)x10 =
(-)0.0640cum.
= 1.354 Say 1.35 cum.
SH:Water supply
TOTAL
Cost of 10 metre
Cost of one metre
Say
Rate
902.90
Amount
1218.92(A)
1218.92
1218.92
121.89
121.90

Description
Max. external dia of pipe = 115mm
= 340mm
Quantity of sand = 10x0.45x0.34 = 1.53 cum.+
Less for pipe 3.142/4(0.115)x10 = (-)0.10cum.
= 1.43 cum.
1248
Rate
Amount
Code
18.41.1A
18.41.10
Code
18.41.1A
Description
SH:Water supply
TOTAL
Cost of 10 metre
Cost of one metre
Say
Unit
Quantity
cum
1.43
Unit
Quantity
cum
2.13
Rate
902.90
Amount
1291.15(A)
1291.15
1291.15
129.11
129.10

Description
= 391.50mm Say 0.392m
Quantity of sand = 10x0.60x0.392 = 2.35 cum.+
Less for pipe 3.142/4(0.167)x10 = (-)0.22cum.
= 2.13 cum.
SH:Water supply
TOTAL
Cost of 10 metre
Cost of one metre
Say
Rate
902.90
Amount
1923.18(A)
1923.18
1923.18
192.31
192.30
18.42
Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all
soils except ordinary hard rocks requiring blasting, including removing the
casing pipe after the hand pump / tube well is lowered and tested :
18.42.1
Up to 6 metres depth
Code
0116
0114
0010
1472
9999
Description
Details of cost for 6m depth
LABOUR For boring and removing the pipeFitter (grade 1)
Beldar
Hire charges of Derrick monkey rope
and other accessories
Depreciation @ 2% of the cost of casing
pipe 6metre @ Rs. per metre
Casing pipe 100 mm dia
Sundries
TOTAL
TOTAL
Cost of 6 metre
Cost of one metre
Say
1249
Unit
Quantity
Rate
Amount
day
day
day
0.50
3.00
0.50
487.00
368.00
800.00
243.50
1104.00
400.00
metre
L.S.
0.12
13.52
335.00
1.73
40.20
23.39
1811.09
18.11
1829.20
274.38
2103.58
350.59
350.60
18.42.2
Code
0116
0114
0010
1472
9999
18.42.3
Code
0116
0114
0010
1472
9999
18.43
Beyond 6 m and up to 12 m depth

Description
LABOUR for boring and removing the pipeFitter (grade 1)
Beldar
Hire charges of Derrick monkey rope
Sundries
TOTAL
TOTAL
Cost of 6 metre
Cost of one metre
Say
Unit
Quantity
Rate
Amount
day
day
day
0.62
3.50
0.62
487.00
368.00
800.00
301.94
1288.00
496.00
metre
L.S.
0.12
13.52
335.00
1.73
40.20
23.39
2149.53
21.50
2171.03
325.65
2496.68
416.11
416.10
Unit
Quantity
day
day
day
0.75
4.00
0.75
487.00
368.00
800.00
365.25
1472.00
600.00
metre
L.S.
0.12
13.52
335.00
1.73
40.20
23.39
2500.84
25.01
2525.85
378.88
2904.73
484.12
484.10
Beyond 12 m and up to 18 m depth

Description
LABOUR
For boring and removing the pipeFitter (grade 1)
Beldar
Hire charges of Derrickmonkey rope
Sundries
TOTAL
TOTAL
Cost of 6 metre
Cost of one metre
Say
Rate
Amount
Providing and placing in position filters of 40 mm diameter G.I. pipe with

brass strainer of approved quality.
Code
Description
1882
9977
Details of cost for one strainer 1.5 long

MATERIAL
Strainer brass 40 mm dia 1.5 metre long
Carriage to site
1250
Unit
Quantity
each
L.S.
1.00
13.52
Rate
600.00
1.73
Amount
600.00
23.39
Code
0116
0114
9999
18.44
Code
1549
2271
9999
0116
0114
9999
18.45
Code
1693
9977
0116
0114
9999
Description
LABOUR
Fitter (grade 1)
Beldar
Sundreis including hamp white lead etc.
TOTAL
TOTAL
Cost of 1.5 metre
Cost of one metre
Say
Unit
Quantity
day
day
L.S.
0.17
0.17
7.15
Rate
487.00
368.00
1.73
Amount
82.79
62.56
12.37
781.11
7.81
788.92
118.34
907.26
604.84
604.85
Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe
for tube well including cleaning and priming the tube well.
Description
Details of cost for a depth of 10 metre
MATERIAL
Carriage of 40mm pipe(36.5kg)
Added 2% wastage and fitting
White lead, hamp and oil etc.
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost for 10 metre
Cost of one metre
Say
Unit
Quantity
metre
10.20
185.00
1887.00
tonne
L.S.
0.03723
6.76
92.24
1.73
3.43
11.69
0.33
0.75
7.25
487.00
368.00
1.73
160.71
276.00
12.54
2351.37
23.51
2374.88
356.23
2731.11
273.11
273.10
day
day
L.S.
Rate
Amount
Providing and placing in position hand pump of approved quality for 40 mm

diameter G.I. pipe complete with all accessories.
Description
Details of cost for one pump
MATERIAL
S.C.I. hand pump
Carriage
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost for one hand pump
Say
1251
Unit
Quantity
Rate
Amount
each
L.S.
1.00
13.52
670.00
1.73
670.00
23.39
day
day
L.S.
0.10
0.10
4.42
487.00
368.00
1.73
48.70
36.80
7.65
786.54
7.87
794.41
119.16
913.57
913.55
18.46
Providing and fixing G.I. Union in G.I. pipe including cutting and threading
the pipe and making long screws etc. complete (New work) :
18.46.1
15 mm nominal bore
Code
1641
9988
0116
0114
18.46.2
Code
1642
9988
0116
0114
18.46.3
Code
1643
9988
0116
0114
Description
MATERIAL
G.I. Union 15 mm nominal bore
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
1.82
30.00
1.73
30.00
3.15
day
day
0.11
0.11
487.00
368.00
53.57
40.48
127.20
1.27
128.47
19.27
147.74
147.75
Unit
Quantity
each
L.S.
1.00
1.82
50.00
1.73
50.00
3.15
day
day
0.11
0.11
487.00
368.00
53.57
40.48
147.20
1.47
148.67
22.30
170.97
170.95
Unit
Quantity
each
L.S.
1.00
1.82
80.00
1.73
80.00
3.15
day
day
0.11
0.11
487.00
368.00
53.57
40.48
177.20
1.77
178.97
26.85
205.82
205.80
20 mm nominal bore
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
Rate
Amount
25 mm nominal bore
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
1252
Rate
Amount
18.46.4
Code
1644
9988
0116
0114
18.46.5
Code
1645
9988
0116
0114
18.46.6
Code
1646
9988
0116
0114
32 mm nominal bore
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
1.82
110.00
1.73
110.00
3.15
day
day
0.11
0.11
487.00
368.00
53.57
40.48
207.20
2.07
209.27
31.39
240.66
240.65
Unit
Quantity
each
L.S.
1.00
1.82
160.00
1.73
160.00
3.15
day
day
0.11
0.11
487.00
368.00
53.57
40.48
257.20
2.57
259.77
38.97
298.74
298.75
Unit
Quantity
each
L.S.
1.00
1.82
200.00
1.73
200.00
3.15
day
day
0.15
0.15
487.00
368.00
73.05
55.20
331.40
3.31
334.71
50.21
384.92
384.90
40 mm nominal bore
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
Rate
Amount
50 mm nominal bore
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
1253
Rate
Amount
18.46.7
Code
1647
9988
0116
0114
18.46.8
Code
1648
9988
0116
0114
65 mm nominal bore
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
1.82
400.00
1.73
400.00
3.15
day
day
0.15
0.15
487.00
368.00
73.05
55.20
531.40
5.31
536.71
80.51
617.22
617.20
Unit
Quantity
each
L.S.
1.00
1.82
470.00
1.73
470.00
3.15
day
day
0.15
0.15
487.00
368.00
73.05
55.20
601.40
6.01
607.41
91.11
698.52
698.50
80 mm nominal bore
Description
MATERIAL
G.I. Union 80mm nominal bore
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
Rate
Amount
18.47
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading
the pipe and making long screws, including excavation, refilling the earth or
cutting of wall and making good the same complete wherever required :
18.47.1
15 mm nominal bore
Code
1641
9988
0116
0114
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
1254
Unit
Quantity
Rate
Amount
each
L.S.
1.00
1.82
30.00
1.73
30.00
3.15
day
day
0.33
0.33
487.00
368.00
160.71
121.44
315.30
3.15
318.45
47.77
366.22
366.20
18.47.2
Code
1642
9988
0116
0114
18.47.3
Code
1643
9988
0116
0114
18.47.4
Code
1644
9988
0116
0114
20 mm nominal bore
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
1.82
50.00
1.73
50.00
3.15
day
day
0.33
0.33
487.00
368.00
160.71
121.44
335.30
3.35
338.65
50.80
389.45
389.45
Unit
Quantity
each
L.S.
1.00
1.82
80.00
1.73
80.00
3.15
day
day
0.33
0.33
487.00
368.00
160.71
121.44
365.30
3.65
368.95
55.34
424.29
424.30
Unit
Quantity
each
L.S.
1.00
1.82
110.00
1.73
110.00
3.15
day
day
0.33
0.33
487.00
368.00
160.71
121.44
395.30
3.95
399.25
59.89
459.14
459.15
25 mm nominal bore
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
Rate
Amount
32 mm nominal bore
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
1255
Rate
Amount
18.47.5
Code
1645
9988
0116
0114
18.47.6
Code
1646
9988
0116
0114
18.47.7
Code
1647
9988
0116
0114
40 mm nominal bore
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
1.82
160.00
1.73
160.00
3.15
day
day
0.33
0.33
487.00
368.00
160.71
121.44
445.30
4.45
449.75
67.46
517.21
517.20
Unit
Quantity
each
L.S.
1.00
1.82
200.00
1.73
200.00
3.15
day
day
0.45
0.45
487.00
368.00
219.15
165.60
587.90
5.88
593.78
89.07
682.85
682.85
Unit
Quantity
each
L.S.
1.00
1.82
400.00
1.73
400.00
3.15
day
day
0.45
0.45
487.00
368.00
219.15
165.60
787.90
7.88
795.78
119.37
915.15
915.15
50 mm nominal bore
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
Rate
Amount
65 mm nominal bore
Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
1256
Rate
Amount
18.47.8
Code
1648
9988
0116
0114
18.48
Code
1649
9977
9999
18.48A
80 mm nominal bore
Description
MATERIAL
G.I. Union 80mm nominal bore
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost for one no.
Say
Quantity
Rate
Amount
each
L.S.
1.00
1.82
470.00
1.73
470.00
3.15
day
day
0.45
0.45
487.00
368.00
219.15
165.60
857.90
8.58
866.48
129.97
996.45
996.45
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank, IS : 12701 marked, with cover and suitable locking arrangement
and making necessary holes for inlet, outlet and overflow pipes but without
fittings and the base support for tank.
Description
Unit
Details of cost for 500 litres

MATERIAL
Polyethylene water storage tank with cover
and suitable locking arrangement
Carriage to site
Placing at terrace
TOTAL
TOTAL
Cost for 500 litre
Cost of one litre
Say
per litre
L.S.
L.S.
Quantity
500.00
179.40
89.70
Rate
5.30
1.73
1.73
Amount
2650.00
310.36
155.18
3115.54
31.16
3146.70
472.01
3618.71
7.23
7.25
Providing and fixing rectangular high density polyethylene water storage

loft tank with cover, conforming to ISI : 12701, colour of opaque white or as
approved by Engineer-in-charge. The rate includes making necessary holes
for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for
tank shall be paid separately.
Code
Description
1649
Details of cost for one no. tank of 500 litres

MATERIAL
Polyethylene water storage tank with cover
and suitable locking arrangement
Carriage to site
9977
Unit
Unit
1257
per litre
L.S.
Quantity
500.00
179.40
Rate
5.30
1.73
Amount
2650.00
310.36
Code
Description
Unit
Quantity
9999
Placing at terrace
TOTAL
TOTAL
Cost of 500 liters
Cost of 1 litre
Say
L.S.
89.70
Rate
1.73
Amount
155.18
3115.54
31.16
3146.70
472.01
3618.71
7.23
7.25
18.49
Providing and fixing C.P. brass bib cock of approved quality conforming to
IS:8931 :
18.49.1
15 mm nominal bore
Code
7257
9988
Description
MATERIAL
C.P. Brass bibcock 15 mm
Carrige of material and fixing charges
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
11.57
Rate
300.00
1.73
Amount
300.00
20.02
320.02
3.20
323.22
48.48
371.70
371.70
18.50
Providing and fixing C.P. brass long nose bib cock of approved quality
conforming to IS standards and weighing not less than 810 gms.
18.50.1
15 mm nominal bore
Code
7258
9988
Description
MATERIAL
C.P. Brass long nose bibcock 15 mm
TOTAL
TOTAL
Cost of 1 no.
Say
1258
Unit
Quantity
each
L.S.
1.00
16.25
Rate
450.00
1.73
Amount
450.00
28.11
478.11
4.78
482.89
72.43
555.32
555.30
18.51
Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
18.51.1
15 mm nominal bore
Code
7259
9988
Description
MATERIAL
C.P. Brass long body bibcock 15 mm
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
13.91
Rate
400.00
1.73
Amount
400.00
24.06
424.06
4.24
428.30
64.25
492.55
492.55
18.52
Providing and fixing C.P. brass stop cock (concealed) of standard design
and of approved make conforming to IS:8931.
18.52.1
15 mm nominal bore
Code
7260
9988
Description
MATERIAL
C.P. Brass stop cock (concealed) 15 mm
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
11.57
Rate
450.00
1.73
Amount
450.00
20.02
470.02
4.70
474.72
71.21
545.93
545.95
18.53
Providing and fixing C.P. brass angle valve for basin mixer and geyser points
of approved quality conforming to IS:8931
18.53.1
15mm nominal bore
Code
7261
9988
Description
MATERIAL
C.P. Brass angle valve 15 mm
Carriage and fixing charges
TOTAL
TOTAL
Cost of 1 no.
Say
1259
Unit
Quantity
each
L.S.
1.00
11.31
Rate
390.00
1.73
Amount
390.00
19.57
409.57
4.10
413.67
62.05
475.72
475.70
18.53A
Code
0593
9999
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of

approved make and quality as per direction of Engineer-in-charge.
Description
MATERIAL
C.P. Brass Extension Nipple (1/2"x2" size)
Sundries
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
2.89
Rate
Amount
45.00
1.73
45.00
5.00
50.00
0.50
50.50
7.58
58.08
58.10
18.54
Providing and fixing PTMT bib cock of approved quality and colour.
18.54.1
15mm nominal bore, 86 mm long, weighing not less than 88 gms
Code
7400
9988
18.54.2
Code
7401
9988
18.54.3
Description
MATERIAL
15 mm PTMT bib cock
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
8.06
Rate
Amount
75.00
1.73
75.00
13.94
88.94
0.89
89.83
13.47
103.30
103.30
15 mm nominal bore, 122mm long, weighing not less than 99 gms

Description
MATERIAL
15 mm PTMT bib cockwith flange (fancy)
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
8.06
Rate
Amount
110.00
1.73
110.00
13.94
123.94
1.24
125.18
18.78
143.96
143.95
15 mm nominal bore, 165 mm long, weighing not less than 110 gms
Code
Description
7402

MATERIAL
15 mm PTMT bib cock long body with flange
1260
Unit
Quantity
each
1.00
Rate
122.00
Amount
122.00
Code
Description
Unit
Quantity
9988

TOTAL
TOTAL
Cost of 1 No..
Say
L.S.
8.06
18.54.4
Code
7859
9988
Rate
Amount
1.73
13.94
135.94
1.36
137.30
20.60
157.90
157.90

Description
MATERIAL
P.T.M.T. Bib cock with nozzle 15mm
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
8.06
Rate
Amount
84.00
1.73
84.00
13.94
97.94
0.98
98.92
14.84
113.76
113.75
18.55
Providing and fixing PTMT stop cock of approved quality and colour.
18.55.1
Code
7403
9988
18.55.2
Code
7405
9988
Description
MATERIAL
15 mm dia PTMT stop cock (male thread)
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
8.06
Rate
75.00
1.73
Amount
75.00
13.94
88.94
0.89
89.83
13.47
103.30
103.30

Description
MATERIAL
20 mm dia. PTMT stop cock
TOTAL
TOTAL
Cost of 1 no.
Say
1261
Unit
Quantity
each
L.S.
1.00
8.06
Rate
102.00
1.73
Amount
102.00
13.94
115.94
1.16
117.10
17.57
134.67
134.65
18.55.3
Code
7861
9988
Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less
than 108 gms
Description
MATERIAL
P.T.M.T. Stop cock (concealed) 15mm
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
8.06
Rate
Amount
125.00
1.73
125.00
13.94
138.94
1.39
140.33
21.05
161.38
161.40
18.56
Providing and fixing PTMT pillar cock of approved quality and colour.
18.56.1
Code
7406
9988
18.56.2
Code
7410
9988
Description
MATERIAL
PTMT pillar cock
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
9.49
Rate
Amount
129.00
1.73
129.00
16.42
145.42
1.45
146.87
22.03
168.90
168.90
15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
Description
MATERIAL
PTMT pillar cock (fancy) 15 mm foam flow.
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
9.49
Rate
Amount
144.00
1.73
144.00
16.42
160.42
1.60
162.02
24.30
186.32
186.30
18.57
Providing and fixing PTMT, push cock of approved quality and colour.
18.57.1
Code
Description
7407

MATERIAL
PTMT push cock 15 mm dia.
1262
Unit
Quantity
each
1.00
Rate
65.00
Amount
65.00
Code
Description
Unit
Quantity
9988

TOTAL
TOTAL
Cost of 1 no.
Say
L.S.
8.06
18.57.2
Code
7408
9988
Rate
1.73
Description
MATERIAL
PTMT push cock 12 mm dia. 20 mm BSP
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
8.06
Rate
60.00
1.73
Providing and fixing PTMT grating of approved quality and colour.
18.58.1
Circular type
18.58.1.1
100 mm nominal dia
7409
9988
18.58.1.2
13.94
78.94
0.79
79.73
11.96
91.69
91.70
18.58
Code
Amount
Description
MATERIAL
PTMT grating 100 mm dia.
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
4.16
Rate
21.00
1.73
Amount
60.00
13.94
73.94
0.74
74.68
11.20
85.88
85.90
Amount
21.00
7.20
28.20
0.28
28.48
4.27
32.75
32.75
125 mm nominal dia with 25 mm waste hole
Code
Description
7411

MATERIAL
125 mm grating withwaste hole
1263
Unit
Quantity
each
1.00
Rate
32.00
Amount
32.00
Code
Description
Unit
Quantity
9988

TOTAL
TOTAL
Cost of 1 no.
Say
L.S.
4.16
Rate
1.73
Amount
7.20
39.20
0.39
39.59
5.94
45.53
45.55
18.58.2
Rectangular type with openable circular lid
18.58.2.1
150 mm nominal size square 100 mm diameter of the inner hinged round grating
Code
7412
9988
Description
MATERIAL
Rectangular type with openable circular lid
150 mm size 18 mm high with 100 mm dia.
(110 gm)
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
L.S.
1.00
4.16
Rate
122.00
1.73
Amount
122.00
7.20
129.20
1.29
130.49
19.57
150.06
150.05
18.59
Providing and fixing C.I. double acting air valve of approved quality with bolts,
nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will
be paid separately) :
18.59.1
50 mm dia
Code
7415
9977
9999
18.30.1
Description
Details of cost for 10 no. double acting air
valves
MATERIAL
Double acting air valve 50 mm
Carriage of air valves
Labour for laying double acting air valve
Providing flanged joints to double acting air
valves with bolts, nuts and rubber
insertions etc.
SH : Water Supply)
TOTAL
i.e. on (40307.95 - 1195.50) = 39112.45
TOTAL
- 1195.50) = 39503.57
Cost of 10 air valves
Cost of 1 air valve
Say
1264
Unit
Quantity
each
L.S.
L.S.
10.00
26.00
39.00
each
10.00
Rate
3900.00
1.73
1.73
Amount
39000.00
44.98
67.47
119.55 1195.50(A)
40307.95
391.12
40699.07
5925.54
46624.61
4662.46
4662.45
18.59.2
Code
7416
9977
9999
18.30.1
18.59.3
Code
7417
9977
9999
18.30.2
80 mm dia
Description
Details of cost for 10 no. double acting air
valves
MATERIAL
insertions etc.
SH : Water Supply)
TOTAL
i.e. on (48807.95 - 1195.50) = 47612.45
TOTAL
- 1195.50) = 48088.57
Cost of 1 air valve
Say
Unit
Quantity
each
L.S.
L.S.
10.00
26.00
39.00
each
10.00
Rate
4750.00
1.73
1.73
Amount
47500.00
44.98
67.47
119.55 1195.50(A)
48807.95
476.12
49284.07
7213.29
56497.36
5649.73
5649.75
100 mm dia
Description
Details of cost for 10 no. double acting
air valves
MATERIAL
insertions etc.
SH:Water Supply)
TOTAL
i.e. on (64073.44 - 1938.50) = 62134.94
TOTAL
- 1938.50) = 62756.29
Cost of 1 air valve
Say
1265
Unit
Quantity
each
L.S.
L.S.
10.00
26.00
52.00
each
10.00
Rate
6200.00
1.73
1.73
Amount
62000.00
44.98
89.96
193.85 1938.50(A)
64073.44
621.35
64694.79
9413.44
74108.23
7410.82
7410.80
18.60
Providing and fixing enclosed type water meter (bulk type) conforming to IS :
2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions
etc. (The tail pieces if required will be paid separately) :
18.60.1
Code
7418
9999
9977
9999
18.30.1
18.60.2
Code
7419
9999
9977
9999
18.30.2
Description
Unit
Details of cost for one no. water meter

MATERIAL
Water meter (including testing charges)
80 mm
Testing charges
Carriage of water meter
Labour for laying water meter
insertions etc.
(Rate as per item no 18.30.1 of SH : Water
Supply)
TOTAL
i.e. on (2706.45 - 239.10) = 2467.35
TOTAL
= 2492.02
Cost of 1 water meter
Say
Quantity
Rate
Amount
each
L.S.
L.S.
L.S.
1.00
130.00
26.00
39.00
2130.00
1.73
1.73
1.73
2130.00
224.90
44.98
67.47
each
2.00
119.55
239.10(A)
2706.45
24.67
2731.12
373.80
3104.92
3104.90

Description
Unit

MATERIAL
100 mm
Testing charges
insertions etc.
(Rate as per item No.18.30.2)
TOTAL
i.e. on (4047.54 - 387.70) = 3659.84
TOTAL
= 3696.44
Say
1266
Quantity
Rate
Amount
each
L.S.
L.S.
L.S.
1.00
130.00
26.00
52.00
3300.00
1.73
1.73
1.73
3300.00
224.90
44.98
89.96
each
2.00
193.85
387.70(A)
4047.54
36.60
4084.14
554.47
4638.61
4638.60
18.60.3
Code
7420
9999
9977
9999
18.30.4
18.60.4
Code
7421
9999
9977
9999
18.30.5

Description
Unit

MATERIAL
150 mm
Testing charges
insertions etc.
Supply)
TOTAL
i.e. on (5935.90 - 486.10) = 5449.80
TOTAL
= 5504.30
Say
Quantity
Rate
Amount
each
L.S.
L.S.
L.S.
1.00
156.00
39.00
65.00
5000.00
1.73
1.73
1.73
5000.00
269.88
67.47
112.45
each
2.00
243.05
486.10(A)
5935.90
54.50
5990.40
825.65
6816.05
6816.05

Description
Unit

MATERIAL
200 mm
Testing charges
insertions etc.
Supply)
TOTAL
i.e. on (6474.66 - 534.90) = 5939.76
TOTAL
= 5999.16
Say
1267
Quantity
Rate
Amount
each
L.S.
L.S.
L.S.
1.00
156.00
52.00
104.00
5400.00
1.73
1.73
1.73
5400.00
269.88
89.96
179.92
each
2.00
267.45
534.90(A)
6474.66
59.40
6534.06
899.87
7433.93
7433.95
18.61
Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts,
bolts, rubber insertions etc. complete conforming to IS : 2373 :
18.61.1
80 mm dia
Code
7422
9977
9999
18.30.1
18.61.2
Code
7423
9977
9999
18.30.2
Description
Details of cost for on no. dirt box strainer
MATERIAL
Dirt box srainer 80 mm
Carriage of dirt box strainer
Labour for laying dirt box strainer
insertions etc.
Supply)
TOTAL
i.e. on (3161.55 - 239.10) = 2922.45
TOTAL
= 2951.67
Cost of 1 dirt box stainer
Say
Unit
Quantity
Rate
Amount
each
L.S.
L.S.
1.00
26.00
39.00
2810.00
1.73
1.73
2810.00
44.98
67.47
each
2.00
119.55
239.10(A)
3161.55
29.22
3190.77
442.75
3633.52
3633.50
100 mm dia
Description
Details of cost for 1 no. dirt box stainer
MATERIAL
insertions etc.
(Rate as per item No.18.30.2 Of SH:Water
Supply)
TOTAL
i.e. on (5102.64 - 387.70) = 4714.94
TOTAL
= 4762.09
Cost of 1 dirt box stainer
Say
1268
Unit
Quantity
Rate
Amount
each
L.S.
L.S.
1.00
26.00
52.00
4580.00
1.73
1.73
4580.00
44.98
89.96
each
2.00
193.85
387.70(A)
5102.64
47.15
5149.79
714.31
5864.10
5864.10
18.61.3
Code
7424
9977
9999
18.30.4
18.61.4
Code
7425
9977
9999
18.30.5
150 mm dia
Description
Details of cost for 1 no. dirt box stainer
MATERIAL
insertions etc.
(Rate as per item No.18.30.4 Of SH:Water
Supply)
TOTAL
i.e. on (6476.02 - 486.10) = 5989.92
TOTAL
= 6049.82
Cost for 1 dirt box stainer
Say
Unit
Quantity
Rate
Amount
each
L.S.
L.S.
1.00
39.00
65.00
5810.00
1.73
1.73
5810.00
67.47
112.45
each
2.00
243.05
486.10(A)
6476.02
59.90
6535.92
907.47
7443.39
7443.40
200 mm dia
Description
Unit
Details of cost for one no. dirt box stainer

MATERIAL
insertions etc.
Supply)
TOTAL
i.e. on (9054.78 - 534.90) = 8519.88
TOTAL
= 8605.08
Cost for 10 dirt box stainer
Say
1269
Quantity
Rate
Amount
each
L.S.
L.S.
1.00
52.00
104.00
8250.00
1.73
1.73
8250.00
89.96
179.92
each
2.00
267.45
534.90(A)
9054.78
85.20
9139.98
1290.76
10430.74
10430.75
18.62
Providing and fixing PTMT Ball cock of approved quality, colour and make
complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
18.62.1
Code
7495
9988
18.62.2
Code
7496
9988
18.62.3
Code
7497
9988
Description
MATERIAL
PTMT Ball Cock 15mm Complete with
Epoxy Coated Aluminium Road & H.D. Ball
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
21.58
Rate
105.00
1.73
Amount
105.00
37.33
142.33
1.42
143.75
21.56
165.31
165.30
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
dach
L.S.
1.00
26.91
Rate
140.00
1.73
Amount
140.00
46.55
186.55
1.87
188.42
28.26
216.68
216.70
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
1270
Unit
Quantity
each
L.S.
1.00
32.24
Rate
300.00
1.73
Amount
300.00
55.78
355.78
3.56
359.34
53.90
413.24
413.25
18.62.4
Code
7498
9988
18.62.5
Code
7499
9988
18.63
Code
7500
9988
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
32.24
Rate
501.00
1.73
Amount
501.00
55.78
556.78
5.57
562.35
84.35
646.70
646.70
Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
32.24
Rate
913.00
1.73
Amount
913.00
55.78
968.78
9.69
978.47
146.77
1125.24
1125.25
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not
less than 85 gms
Description
MATERIAL
PTMT Angle Stop cock with Flenge 15mm
TOTAL
TOTAL
Cost of one no.
Say
1271
Unit
Quantity
each
L.S.
1.00
8.06
Rate
102.00
1.73
Amount
102.00
13.94
115.94
1.16
117.10
17.57
134.67
134.65
18.64
Code
7501
9988
18.65
Code
7509
9988
Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing

not less than 40 gms
Description
MATERIAL
PTMT Swiveling shower 15mm
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
6.76
Rate
75.00
1.73
Amount
75.00
11.69
86.69
0.87
87.56
13.13
100.69
100.70
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth
102mm, height of 75mm with concealed fitting arrangements, weighing not less
than 106 gms.
Description
Details of cost for one no
MATERIAL
PTMT Soap Dish/Holder 138x102x75mm
TOTAL
TOTAL
Cost of one no
Say
Unit
Quantity
each
L.S.
1.00
6.76
Rate
85.00
1.73
Amount
85.00
11.69
96.69
0.97
97.66
14.65
112.31
112.30
18.66
Providing and laying S&S C.I. Standard specials such as tees, bends, collars
tapers and caps etc, suitable for flanged jointing as per IS : 1538 :
18.66.1
Up to 300 mm dia
Code
7708
2309
18.24
Description
MATERIAL
S&S Centrifugally (Spun) C.I. Pipe Specials
as per IS 1538 suitable for lead jointing
upto 300mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (5743.42 - 284.20) = 5459.22
TOTAL
= 5513.81
Cost of 1 quintal
Say
1272
Unit
Quantity
Rate
Amount
quintal
tonne
1.00
0.10
5450.00
92.24
5450.00
9.22
quintal
1.00
284.20
284.20(A)
5743.42
54.59
5798.01
827.07
6625.08
6625.10
18.66.2
Code
7709
2309
18.24
Above 300 mm dia

Description
MATERIAL
as per IS 1538 suitable for lead jointing
over 300mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (6803.42 - 284.20) = 6519.22
TOTAL
= 6584.41
Cost of 1 quintal
Say
Unit
Quantity
Rate
Amount
quintal
tonne
1.00
0.10
6510.00
92.24
6510.00
9.22
quintal
1.00
284.20
284.20(A)
6803.42
65.19
6868.61
987.66
7856.27
7856.25
18.67
Providing and laying S&S C.I. Standard specials suitable for mechanical jointing
as per IS : 13382 :
18.67.1
Up to 300 mm dia
Code
7710
2309
18.24
18.67.2
Description
MATERIAL
S&S Centrifugally (Spun) C.I. Pipe specials
suitable for mechanical joint as per
I.S. 13382 upto 300mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (9293.42 - 284.20) = 9009.22
TOTAL
= 9099.31
Cost of 1 quintal
Say
Unit
Quantity
Rate
Amount
quintal
tonne
1.00
0.10
9000.00
92.24
9000.00
9.22
quintal
1.00
284.20
284.20(A)
9293.42
90.09
9383.51
1364.90
10748.41
10748.40
Above 300 mm dia
Code
Description
7711

MATERIAL
suitabe for mechanical joint as per
IS 13382 over 300mm dia
1273
Unit
Quantity
quintal
1.00
Rate
9500.00
Amount
9500.00
Code
Description
2309

Labour for Laying
SH: Water Supply
TOTAL
i.e. on (9793.42 - 284.20) = 9509.22
TOTAL
= 9604.31
Cost of 1 quintal
Say
18.24
Unit
Quantity
Rate
Amount
tonne
0.10
92.24
9.22
quintal
1.00
284.20
284.20(A)
9793.42
95.09
9888.51
1440.65
11329.16
11329.15
18.68
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as
per IS : 9523 :
18.68.1
Up to 600 mm dia
Code
7682
2309
18.24
18.68.2
Code
7683
2309
Description
MATERIAL
Ductile Iron K - 12 specials suitable for
push on jointing upto 600 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (13293.42 - 284.20) = 13009.22
TOTAL
= 13139.31
Cost of 1 quintal
Say
Unit
Quantity
Rate
Amount
quintal
tonne
1.00
0.10
13000.00
92.24
13000.00
9.22
quintal
1.00
284.20
284.20(A)
13293.42
130.09
13423.51
1970.90
15394.41
15394.40
Above 600 mm dia

Description
MATERIAL
Ductile Iron K - 12 specials suitable for
push on jointing over 600mm dia
Labour for laying
1274
Unit
Quantity
quintal
tonne
1.00
0.10
Rate
18000.00
92.24
Amount
18000.00
9.22
Code
Description
18.24

SH: Water Supply
TOTAL
i.e. on (18293.42 - 284.20) = 18009.22
TOTAL
= 18189.31
Cost of 1 quintal
Say
Unit
Quantity
quintal
1.00
Rate
284.20
Amount
284.20(A)
18293.42
180.09
18473.51
2728.40
21201.91
21201.90
18.69
Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing
as per IS : 9523 :
18.69.1
Up to 600 mm dia
Code
7684
2309
18.24
18.69.2
Code
7685
2309
Description
MATERIAL
Ductile Iron specials suitable for
mechanical jointing as per I.S. 9523 upto 600mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (13993.42 - 284.20) = 13709.22
TOTAL
= 13846.31
Cost of 1 quintal
Say
Unit
Quantity
Rate
Amount
quintal
tonne
1.00
0.10
13700.00
92.24
13700.00
9.22
quintal
1.00
284.20
284.20(A)
13993.42
137.09
14130.51
2076.95
16207.46
16207.45
Above 600 mm dia

Description
MATERIAL
Ductile Iron Specials suitable for
mechancial jointing as per I.S. 9523 over
600mm dia
Labour for laying
1275
Unit
Quantity
quintal
tonne
1.00
0.10
Rate
19650.00
92.24
Amount
19650.00
9.22
Code
Description
18.24

SH: Water Supply
TOTAL
i.e. on (19943.42 - 284.20) = 19659.22
TOTAL
= 19855.81
Cost of 1 quintal
Say
Unit
Quantity
quintal
1.00
Rate
284.20
Amount
284.20(A)
19943.42
196.59
20140.01
2978.37
23118.38
23118.40
18.70
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron

Pipes including testing of joints and the cost of rubber gasket :
18.70.1
100 mm dia pipes
Code
7666
0116
0117
0114
18.70.2
Code
7668
0116
0117
0114
Description
Details of cost for 50 Joints
MATERIAL
Ruber Gaskets Conforming to I.S 5382 of
S.B.R quality 100mm dia
Labour
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
Unit
Quantity
Rate
Amount
each
50.00
30.00
1500.00
day
day
day
1.00
1.00
1.00
487.00
448.00
368.00
487.00
448.00
368.00
2803.00
28.03
2831.03
424.65
3255.68
65.11
65.10
Unit
Quantity
each
50.00
38.00
1900.00
day
day
day
1.50
1.50
3.00
487.00
448.00
368.00
730.50
672.00
1104.00
4406.50
44.07
4450.57
667.59
5118.16
102.36
102.35
150 mm dia pipes

Description
MATERIAL
Labour
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
1276
Rate
Amount
18.70.3
Code
7669
0116
0117
0114
18.70.4
Code
7670
0116
0117
0114
18.70.5
Code
7671
0116
0117
200 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
Unit
Quantity
Rate
Amount
each
50.00
66.00
3300.00
day
day
day
2.00
2.00
4.00
487.00
448.00
368.00
974.00
896.00
1472.00
6642.00
66.42
6708.42
1006.26
7714.68
154.29
154.30
Unit
Quantity
each
50.00
78.00
3900.00
day
day
day
2.50
2.50
5.00
487.00
448.00
368.00
1217.50
1120.00
1840.00
8077.50
80.78
8158.28
1223.74
9382.02
187.64
187.65
Unit
Quantity
each
50.00
115.00
5750.00
day
day
3.00
3.00
487.00
448.00
1461.00
1344.00
250 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
Rate
Amount
300 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
1277
Rate
Amount
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
day
6.00
Unit
Quantity
each
50.00
132.00
6600.00
day
day
day
3.00
3.00
6.00
487.00
448.00
368.00
1461.00
1344.00
2208.00
11613.00
116.13
11729.13
1759.37
13488.50
269.77
269.75
Unit
Quantity
each
50.00
240.00
12000.00
day
day
day
4.00
4.00
8.00
487.00
448.00
368.00
1948.00
1792.00
2944.00
18684.00
186.84
18870.84
2830.63
21701.47
434.02
434.00
18.70.6
Code
7672
0116
0117
0114
18.70.7
Code
7673
0116
0117
0114
Rate
368.00
Amount
2208.00
10763.00
107.63
10870.63
1630.59
12501.22
250.02
250.00
350 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
Rate
Amount
400 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
1278
Rate
Amount
18.70.8
Code
7674
0116
0117
0114
18.70.9
Code
7675
0116
0117
0114
18.70.10
Code
7676
0116
0117
450 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
Unit
Quantity
Rate
Amount
each
50.00
280.00
14000.00
day
day
day
4.50
4.50
9.00
487.00
448.00
368.00
2191.50
2016.00
3312.00
21519.50
215.20
21734.70
3260.21
24994.91
499.89
499.90
Unit
Quantity
each
50.00
305.00
15250.00
day
day
day
4.75
4.75
9.50
487.00
448.00
368.00
2313.25
2128.00
3496.00
23187.25
231.87
23419.12
3512.87
26931.99
538.63
538.65
Unit
Quantity
each
50.00
380.00
19000.00
day
day
6.50
6.50
487.00
448.00
3165.50
2912.00
500 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
Rate
Amount
600 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
1279
Rate
Amount
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
day
13.00
Unit
Quantity
each
50.00
575.00
28750.00
day
day
day
7.70
7.70
15.40
487.00
448.00
368.00
3749.90
3449.60
5667.20
41616.70
416.17
42032.87
6304.93
48337.80
966.75
966.75
Unit
Quantity
each
50.00
690.00
34500.00
day
day
day
7.70
7.70
15.40
487.00
448.00
368.00
3749.90
3449.60
5667.20
47366.70
473.67
47840.37
7176.06
55016.43
1100.32
1100.30
18.70.11
Code
7677
0116
0117
0114
18.70.12
Code
7678
0116
0117
0114
Rate
368.00
Amount
4784.00
29861.50
298.62
30160.12
4524.02
34684.14
693.68
693.70
650 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
Rate
Amount
700 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
1280
Rate
Amount
18.70.13
Code
7679
0116
0117
0114
18.70.14
Code
7680
0116
0117
0114
18.70.15
Code
7681
0116
0117
800 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
Unit
Quantity
Rate
Amount
each
50.00
760.00
38000.00
day
day
day
8.50
8.50
17.00
487.00
448.00
368.00
4139.50
3808.00
6256.00
52203.50
522.04
52725.54
7908.83
60634.37
1212.68
1212.70
Unit
Quantity
each
50.00
1000.00
50000.00
day
day
day
10.00
10.00
20.00
487.00
448.00
368.00
4870.00
4480.00
7360.00
66710.00
667.10
67377.10
10106.57
77483.67
1549.67
1549.65
Unit
Quantity
each
50.00
1200.00
60000.00
day
day
11.00
11.00
487.00
448.00
5357.00
4928.00
900 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
Rate
Amount
1000 mm dia pipes

Description
MATERIAL
LABOUR
Fitter (grade 1)
1281
Rate
Amount
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 50 joints
Cost of 1 joint
Say
day
22.00
Rate
368.00
Amount
8096.00
78381.00
783.81
79164.81
11874.72
91039.53
1820.79
1820.80
18.71
Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun)

Cast Iron, Class B (IS : 1536) :
18.71.1
100 mm dia C.I. Double Flanged Pipe
Code
7712
2319
18.23
18.71.2
Code
7713
2321
Description
MATERIAL
100 mm dia. cast iron pipes double flanged
Weight of 5 m pipes 27.00x5 = 135.00 Kg
Screwed double flanged centrigually cast
(spun) C.I. Pipe of Class B conforming to
I.S. 1536, - 100mm dia
100 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (7092.62 - 206.28) = 6886.34
TOTAL
= 6955.20
Cost of 5 metre
Cost of metre
Say
Unit
Quantity
Rate
Amount
metre
5.00
1375.00
6875.00
100 metre
0.05
226.82
11.34
quintal
1.35
152.80
206.28(A)
7092.62
68.86
7161.48
1043.28
8204.76
1640.95
1640.95

Description
MATERIAL
I.S. 1536, - 150mm dia
150 mm dia
1282
Unit
Quantity
Rate
Amount
metre
5.00
2150.00
10750.00
100 metre
0.05
378.03
18.90
Code
18.23
18.71.3
Code
7714
2322
18.23
18.71.4
Code
7715
Description
Labour for laying
SH: Water Supply
TOTAL
i.e. on (11106.59 - 337.69) = 10768.90
TOTAL
= 10876.59
Cost of 5 metre
Cost per metre
Say
Unit
Quantity
quintal
2.21
Rate
152.80
Amount
337.69(A)
11106.59
107.69
11214.28
1631.49
12845.77
2569.15
2569.15

Description
MATERIAL
I.S. 1536, - 200mm dia
200 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (17516.65 - 485.90) = 17030.75
TOTAL
= 17201.06
Cost of 5 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
5.00
3400.00
17000.00
100 metre
0.05
614.93
30.75
quintal
3.18
152.80
485.90(A)
17516.65
170.31
17686.96
2580.16
20267.12
4053.42
4053.40

Description
MATERIAL
I.S. 1536, - 250mm dia
1283
Unit
Quantity
metre
5.00
Rate
4100.00
Amount
20500.00
Code
Description
2323

250 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (21196.15 - 652.46) = 20543.69
TOTAL
= 20749.13
Cost of 5 metre
Cost per metre
Say
18.23
18.71.5
Code
7716
2324
18.23
18.71.6
Code
Unit
Quantity
Rate
Amount
100 metre
0.05
873.84
43.69
quintal
4.27
152.80
652.46(A)
21196.15
205.44
21401.59
3112.37
24513.96
4902.79
4902.80

Description
MATERIAL
I.S. 1536, - 300mm dia
300 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (27094.40 - 840.40) = 26254.00
TOTAL
= 26516.54
Cost of 5 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
5.00
5240.00
26200.00
100 metre
0.05
1080.08
54.00
quintal
5.50
152.80
840.40(A)
27094.40
262.54
27356.94
3977.48
31334.42
6266.88
6266.90

Description
Unit

MATERIAL
1284
Quantity
Rate
Amount
Code
Description
7717

I.S. 1536, - 350mm dia
350 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (34113.12 - 1037.51) = 33075.61
TOTAL
= 33406.37
Cost of 5 metre
Cost per metre
Say
2325
18.23
18.71.7
Code
7718
2326
18.23
Unit
Quantity
Rate
Amount
metre
5.00
6600.00
33000.00
100 metre
0.05
1512.11
75.61
quintal
6.79
152.80 1037.51(A)
34113.12
330.76
34443.88
5010.96
39454.84
7890.96
7890.95

Description
MATERIAL
I.S. 1536, - 400mm dia
400 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (44127.45 - 1274.35) = 42853.10
TOTAL
- 1274.35) = 43281.63
Cost of 5 metre
Cost per metre
Say
1285
Unit
Quantity
Rate
Amount
metre
5.00
8550.00
42750.00
100 metre
0.05
2061.97
103.10
quintal
8.34
152.80 1274.35(A)
44127.45
428.53
44555.98
6492.24
51048.22
10209.64
10209.65
18.71.8
Code
7719
2327
18.23
18.71.9
Code
7720
2328
18.23

Description
MATERIAL
I.S. 1536, - 450mm dia
450 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (56166.23 - 1540.22) = 54626.01
TOTAL
- 1540.22) = 55172.27
Cost of 5 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
5.00
10900.00
54500.00
100 metre
0.05
2520.19
126.01
quintal
10.08
152.80 1540.22(A)
56166.23
546.26
56712.49
8275.84
64988.33
12997.66
12997.65

Description
MATERIAL
I.S. 1536, - 500mm dia
500 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (69719.88 - 1793.87) = 67926.01
TOTAL
- 1793.87) = 68605.27
Cost of 5 metre
Cost per metre
Say
1286
Unit
Quantity
Rate
Amount
metre
5.00
13560.00
67800.00
100 metre
0.05
2520.19
126.01
quintal
11.74
152.80 1793.87(A)
69719.88
679.26
70399.14
10290.79
80689.93
16137.98
16138.00
18.71.10
Code
7721
2329
18.23

Description
MATERIAL
I.S. 1536, - 600mm dia
600mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (96598.67 - 2409.66) = 94189.01
TOTAL
- 2409.66) = 95130.90
Cost of 5 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
5.00
18800.00
94000.00
100 metre
0.05
3780.28
189.01
quintal
15.77
152.80 2409.66(A)
96598.67
941.89
97540.56
14269.64
111810.20
22362.04
22362.05
18.72
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes
conforming to IS : 8329 :
18.72.1
100 mm dia Ductile Iron Class K-7 pipes
Code
7722
2343
18.23
Description
MATERIAL
100mm dia. cast iron pipes (in 5.5 m lengths)
Ductile Iron Class K- 7 pipe conforming to
I.S. 8329 - 100mm dia
Carriage of ductile iron pipes (k7) 100 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (8007.99 - 235.31) = 7772.68
TOTAL
= 7850.41
Cost of 10 metre
Cost per metre
Say
1287
Unit
Quantity
Rate
Amount
metre
100 metre
10.00
0.10
775.00
226.82
7750.00
22.68
quintal
1.54
152.80
235.31(A)
8007.99
77.73
8085.72
1177.56
9263.28
926.32
926.30
18.72.2
Code
7723
2344
18.23
18.72.3
Code
7724
2345
18.23

Description
MATERIAL
150 mm dia. cast iron pipes (in 5.5 m lengths)
I.S. 8329 - 150mm dia
Carriage of cast iron pipes 150 mm dia
SH: Water Supply
TOTAL
i.e. on (11586.18 - 348.38) = 11237.80
TOTAL
= 11350.18
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
100 metre
10.00
0.10
1120.00
11200.00
quintal
2.28
152.80
348.38(A)
11586.18
112.38
11698.56
1702.53
13401.09
1340.10
1340.10

Description
MATERIAL
200 mm dia. cast iron pipes (in 5.5 m
lengths)
I.S. 8329 - 200mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (16021.42 - 459.93) = 15561.49
TOTAL
- 459.93) = 15717.10
Cost of 10 metre
Cost per metre
Say
1288
Unit
Quantity
Rate
Amount
metre
100 metre
10.00
0.10
1550.00
614.93
15500.00
61.49
quintal
3.01
152.80
459.93(A)
16021.42
155.61
16177.03
2357.57
18534.60
1853.46
1853.45
18.72.4
Code
7725
2346
18.23
18.72.5
Code
7726
2347
18.23

Description
MATERIAL
I.S. 8329 - 250mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (21687.88 - 600.50) = 21087.38
TOTAL
- 600.50) = 21298.25
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
100 metre
10.00
0.10
2100.00
873.84
21000.00
87.38
quintal
3.93
152.80
600.50(A)
21687.88
210.87
21898.75
3194.74
25093.49
2509.34
2509.35

Description
MATERIAL
I.S. 8329 - 300mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (28557.56 - 739.55) = 27818.01
TOTAL
- 739.55) = 28096.19
Cost of 10 metre
Cost per metre
Say
1289
Unit
Quantity
Rate
Amount
metre
100 metre
10.00
0.10
2771.00
1080.08
27710.00
108.01
quintal
4.84
152.80
739.55(A)
28557.56
278.18
28835.74
4214.43
33050.17
3305.01
3305.00
18.72.6
Code
7727
2348
18.23
18.72.7
Code
7728
2349
18.23

Description
MATERIAL
I.S. 8329 - 350mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (34699.69 - 1008.48) = 33691.21
TOTAL
- 1008.48) = 34028.12
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
6.60
Rate
3354.00
1512.11
Amount
33540.00
151.21
152.80 1008.48(A)
34699.69
336.91
35036.60
5104.22
40140.82
4014.08
4014.10

Description
MATERIAL
Ductile Iron Class K- 7 pipe conforming
to I.S. 8329 - 400mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (41552.62 - 1196.42) = 40356.20
TOTAL
- 1196.42) = 40759.76
Cost of 10 metre
Cost per metre
Say
1290
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
7.83
Rate
4015.00
2061.97
Amount
40150.00
206.20
152.80 1196.42(A)
41552.62
403.56
41956.18
6113.96
48070.14
4807.01
4807.00
18.72.8
Code
7729
2350
18.23
18.72.9
Code
7730
2351
18.23

Description
MATERIAL
I.S. 8329 - 450mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (50168.61 - 1396.59) = 48772.02
TOTAL
- 1396.59) = 49259.74
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
9.14
Rate
4852.00
2520.19
Amount
48520.00
252.02
152.80 1396.59(A)
50168.61
487.72
50656.33
7388.96
58045.29
5804.52
5804.50

Description
MATERIAL
= 1066.40 Kg
I.S. 8329 - 500mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (59230.87 - 1628.85) = 57602.02
TOTAL
- 1628.85) = 58178.04
Cost of 10 metre
Cost per metre
Say
1291
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
10.66
Rate
5735.00
2520.19
Amount
57350.00
252.02
152.80 1628.85(A)
59230.87
576.02
59806.89
8726.71
68533.60
6853.36
6853.35
18.72.10
Code
7731
2352
18.23
18.72.11
Code
7732
2353
18.23

Description
MATERIAL
= 1386.10 Kg
I.S. 8329 - 600mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (76515.84 - 2117.81) = 74398.03
TOTAL
- 2117.81) = 75142.01
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
13.86
Rate
7402.00
3780.28
Amount
74020.00
378.03
152.80 2117.81(A)
76515.84
743.98
77259.82
11271.30
88531.12
8853.11
8853.10

Description
MATERIAL
= 1889.20 Kg
I.S. 8329 - 700mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (99394.42 - 2886.39) = 96508.03
TOTAL
- 2886.39) = 97473.11
Cost of 10 metre
Cost per metre
Say
1292
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
18.89
Rate
9613.00
3780.28
Amount
96130.00
378.03
152.80 2886.39(A)
99394.42
965.08
100359.50
14620.97
114980.47
11498.04
11498.05
18.72.12
Code
7733
2355
18.23
18.72.13
Code
7734
2356
18.23

Description
MATERIAL
= 2435.10 Kg
I.S. 8329 - 800mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (125098.71 - 3720.68) = 121378.03
TOTAL
- 3720.68) = 122591.81
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
24.35
Rate
12100.00
3780.28
Amount
121000.00
378.03
152.80 3720.68(A)
125098.71
1213.78
126312.49
18388.77
144701.26
14470.12
14470.10

Description
MATERIAL
I.S. 8329 - 900mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (160916.70 - 4319.66) = 156597.04
TOTAL
- 4319.66) = 158163.01
Cost of 10 metre
Cost per metre
Say
1293
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
28.27
Rate
15603.00
5670.42
Amount
156030.00
567.04
152.80 4319.66(A)
160916.70
1565.97
162482.67
23724.45
186207.12
18620.71
18620.70
18.72.14
Code
7735
2357
18.23
18.72.15
Code
7651
2319
18.23

Description
MATERIAL
lengths)
= 3482.30 Kg
I.S. 8329 - 1000mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (176396.56 - 5320.50) = 171076.06
TOTAL
- 5320.50) = 172786.82
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
34.82
Rate
17032.00
7560.57
Amount
170320.00
756.06
152.80 5320.50(A)
176396.56
1710.76
178107.32
25918.02
204025.34
20402.53
20402.55

Description
MATERIAL
Ductile Iron class K - 9 pipe Conforming to
I.S. 8329 100mm dia
100 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (8294.05 - 271.37) = 8022.68
TOTAL
- 271.37) = 8102.91
Cost of 10 metre
Cost per metre
Say
1294
Unit
Quantity
Rate
Amount
metre
10.00
800.00
8000.00
100 metre
0.10
226.82
22.68
quintal
1.776
152.80
271.37(A)
8294.05
80.23
8374.28
1215.44
9589.72
958.97
958.95
18.72.16
Code
7652
2321
18.23
18.72.17
Code
7653
2322
18.23

Description
MATERIAL
lengths)
I.S. 8329 150mm dia
150 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (12439.21 - 401.41) = 12037.80
TOTAL
- 401.41) = 12158.18
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
10.00
1200.00
12000.00
100 metre
0.10
378.03
37.80
quintal
2.627
152.80
401.41(A)
12439.21
120.38
12559.59
1823.73
14383.32
1438.33
1438.35

Description
MATERIAL
I.S. 8329 200mm dia
200 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (17113.86 - 552.37) = 16561.49
TOTAL
- 552.37) = 16727.10
Cost of 10 metre
Cost per metre
Say
1295
Unit
Quantity
Rate
Amount
metre
10.00
1650.00
16500.00
100 metre
0.10
614.93
61.49
quintal
3.615
152.80
552.37(A)
17113.86
165.61
17279.47
2509.07
19788.54
1978.85
1978.85
18.72.18
Code
7654
2323
18.23
18.72.19
Code
7655
2324
18.23

Description
MATERIAL
Ductile Iron class K - 9 pipe Conforming
to I.S. 8329 - 250mm dia
250 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (23820.82 - 733.44) = 23087.38
TOTAL
- 733.44) = 23318.25
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
10.00
2300.00
23000.00
100 metre
0.10
873.84
87.38
quintal
4.80
152.80
733.44(A)
23820.82
230.87
24051.69
3497.74
27549.43
2754.94
2754.95

Description
MATERIAL
to I.S. 8329 - 300mm dia
300 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (29632.30 - 924.29) = 28708.01
TOTAL
- 924.29) = 28995.09
Cost of 10 metre
Cost per metre
Say
1296
Unit
Quantity
Rate
Amount
metre
10.00
2860.00
28600.00
100 metre
0.10
1080.08
108.01
quintal
6.049
152.80
924.29(A)
29632.30
287.08
29919.38
4349.26
34268.64
3426.86
3426.85
18.72.20
Code
7656
2325
18.23
18.72.21
Code
7657
2326
18.23

Description
MATERIAL
to I.S. 8329 - 350mm dia
350 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (36469.48 - 1218.27) = 35251.21
TOTAL
- 1218.27) = 35603.72
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
10.00
3510.00
35100.00
100 metre
0.10
1512.11
151.21
quintal
7.973
152.80 1218.27(A)
36469.48
352.51
36821.99
5340.56
42162.55
4216.25
4216.25

Description
MATERIAL
to I.S. 8329 - 400mm dia
400 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (46654.74 - 1448.54) = 45206.20
TOTAL
- 1448.54) = 45658.26
Cost of 10 metre
Cost per metre
Say
1297
Unit
Quantity
Rate
Amount
metre
10.00
4500.00
45000.00
100 metre
0.10
2061.97
206.20
quintal
9.48
152.80 1448.54(A)
46654.74
452.06
47106.80
6848.74
53955.54
5395.55
5395.55
18.72.22
Code
7658
2327
18.23
18.72.23
Code
7659
2328
18.23

Description
MATERIAL
= 1109.70 Kg
I.S. 8329 - 450mm dia
450 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (53947.64 - 1695.62) = 52252.02
TOTAL
- 1695.62) = 52774.54
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
metre
10.00
5200.00
52000.00
100 metre
0.10
2520.19
252.02
quintal
11.097
Rate
Amount
152.80 1695.62(A)
53947.64
522.52
54470.16
7916.18
62386.34
6238.63
6238.65

Description
MATERIAL
= 1294.80 Kg
I.S. 8329 - 500mm dia
500 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (68030.47 - 1978.45) = 66052.02
TOTAL
- 1978.45) = 66712.54
Cost of 10 metre
Cost per metre
Say
1298
Unit
Quantity
metre
10.00
6580.00
65800.00
100 metre
0.10
2520.19
252.02
quintal
12.948
Rate
Amount
152.80 1978.45(A)
68030.47
660.52
68690.99
10006.88
78697.87
7869.78
7869.80
18.72.24
Code
7660
2329
18.23
18.72.25
Code
7661
2330
18.23

Description
MATERIAL
= 1686.80 Kg
I.S. 8329 - 600mm dia
600mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (82255.46 - 2577.43) = 79678.03
TOTAL
- 2577.43) = 80474.81
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
metre
10.00
7930.00
79300.00
100 metre
0.10
3780.28
378.03
quintal
16.868
Rate
Amount
152.80 2577.43(A)
82255.46
796.78
83052.24
12071.22
95123.46
9512.34
9512.35

Description
MATERIAL
= 2175.40 Kg
to I.S. 8329 - 700mm dia
Carriage of C.I. pipes 500 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (113576.03 - 3324.01) = 110252.02
TOTAL
- 3324.01) = 111354.54
Cost of 10 metre
Cost per metre
Say
1299
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
21.754
Rate
11000.00
2520.19
Amount
110000.00
252.02
152.80 3324.01(A)
113576.03
1102.52
114678.55
16703.18
131381.73
13138.17
13138.15
18.72.26
Code
7662
2331
18.23
18.72.27
Code
7663
2332
18.23

Description
MATERIAL
= 2426.00 Kg
I.S. 8329 - 750mm dia
Carriage of R.C.C. pipes 900 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (123273.97 - 3706.93) = 119567.04
TOTAL
- 3706.93) = 120762.71
Cost of 10 metre
Cost per metre
Say
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
24.26
Rate
11900.00
5670.42
Amount
119000.00
567.04
152.80 3706.93(A)
123273.97
1195.67
124469.64
18114.41
142584.05
14258.40
14258.40

Description
MATERIAL
= 2671.00 Kg
I.S. 8329 - 800mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (124837.35 - 4081.29) = 120756.06
TOTAL
- 4081.29) = 121963.62
Cost of 10 metre
Cost per metre
Say
1300
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
26.71
Rate
12000.00
7560.57
Amount
120000.00
756.06
152.80 4081.29(A)
124837.35
1207.56
126044.91
18294.54
144339.45
14433.94
14433.95
18.72.28
Code
7664
2333
18.23
18.72.29
Code
7665
2334
18.23

Description
Unit

MATERIAL
= 3212.90 Kg
I.S. 8329 - 900mm dia
metre
100 metre
Labour for laying
SH: Water Supply
quintal
TOTAL
i.e. on (150665.37 - 4909.31) = 145756.06
TOTAL
- 4909.31) = 147213.62
Cost of 10 metre
Cost per metre
Say
Quantity
10.00
0.10
32.129
Rate
14500.00
7560.57
Amount
145000.00
756.06
152.80 4909.31(A)
150665.37
1457.56
152122.93
22082.04
174204.97
17420.49
17420.50

Description
MATERIAL
lengths)
= 3801.90 Kg
I.S. 8329 - 1000mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (169565.36 - 5809.30) = 163756.06
TOTAL
- 5809.30) = 165393.62
Cost of 10 metre
Cost per metre
Say
1301
Unit
Quantity
metre
100 metre
10.00
0.10
quintal
38.019
Rate
16300.00
7560.57
Amount
163000.00
756.06
152.80 5809.30(A)
169565.36
1637.56
171202.92
24809.04
196011.96
19601.19
19601.20
18.73
Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun)

Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :
18.73.1
100 mm dia Ductile Iron Double Flanged
Code
7686
2319
18.23
18.73.2
Code
7687
2321
18.23
Description
MATERIAL
100 mm dia. ductile iron pipes double flanged
Ductile Iron Pipe Class K-9 flanges and
welding 100mm dia
100 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (5952.89 - 166.55) = 5786.34
TOTAL
= 5844.20
Cost of 5 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
5.00
1155.00
5775.00
100 metre
0.05
226.82
11.34
quintal
1.09
152.80
166.55(A)
5952.89
57.86
6010.75
876.63
6887.38
1377.47
1377.45

Description
MATERIAL
welding 150 dia
150 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (8932.96 - 249.06) = 8683.90
TOTAL
- 249.06) = 8770.74
Cost of 5 metre
Cost per metre
Say
1302
Unit
Quantity
Rate
Amount
metre
5.00
1733.00
8665.00
100 metre
0.05
378.03
18.90
quintal
1.63
152.80
249.06(A)
8932.96
86.84
9019.80
1315.61
10335.41
2067.08
2067.10
18.73.3
Code
7688
2322
18.23
18.73.4
Code
7689
2323
18.23

Description
MATERIAL
welding 200mm dia
200 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (11263.44 - 337.69) = 10925.75
TOTAL
- 337.69) = 11035.01
Cost of 5 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
5.00
2179.00
10895.00
100 metre
0.05
614.93
30.75
quintal
2.21
152.80
337.69(A)
11263.44
109.26
11372.70
1655.25
13027.95
2605.59
2605.60

Description
MATERIAL
welding 250mm dia
250 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (15987.51 - 453.82) = 15533.69
TOTAL
- 453.82) = 15689.03
Cost of 5 metre
Cost per metre
Say
1303
Unit
Quantity
Rate
Amount
metre
5.00
3098.00
15490.00
100 metre
0.05
873.84
43.69
quintal
2.97
152.80
453.82(A)
15987.51
155.34
16142.85
2353.35
18496.20
3699.24
3699.25
18.73.5
Code
7690
2324
18.23
18.73.6
Code
7691
2325
18.23

Description
MATERIAL
welding 300mm dia
300 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (20537.70 - 583.70) = 19954.00
TOTAL
- 583.70) = 20153.54
Cost of 5 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
5.00
3980.00
19900.00
100 metre
0.05
1080.08
54.00
quintal
3.82
152.80
583.70(A)
20537.70
199.54
20737.24
3023.03
23760.27
4752.05
4752.05

Description
MATERIAL
welding 350mm dia
350 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (25868.91 - 698.30) = 25170.61
TOTAL
- 698.30) = 25422.32
Cost of 5 metre
Cost per metre
Say
1304
Unit
Quantity
Rate
Amount
metre
5.00
5019.00
25095.00
100 metre
0.05
1512.11
75.61
quintal
4.57
152.80
698.30(A)
25868.91
251.71
26120.62
3813.35
29933.97
5986.79
5986.80
18.73.7
Code
7692
2326
18.23
18.73.8
Code
7693
2327
18.23

Description
MATERIAL
welding 400mm dia
400 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (33218.22 - 825.12) = 32393.10
TOTAL
- 825.12) = 32717.03
Cost of 5 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
5.00
6458.00
32290.00
100 metre
0.05
2061.97
103.10
quintal
5.40
152.80
825.12(A)
33218.22
323.93
33542.15
4907.55
38449.70
7689.94
7689.95

Description
MATERIAL
welding 450mm dia
450 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (34982.40 - 976.39) = 34006.01
TOTAL
- 976.39) = 34346.07
Cost of 5 metre
Cost per metre
Say
1305
Unit
Quantity
Rate
Amount
metre
5.00
6776.00
33880.00
100 metre
0.05
2520.19
126.01
quintal
6.39
152.80
976.39(A)
34982.40
340.06
35322.46
5151.91
40474.37
8094.87
8094.85
18.73.9
Code
7694
2328
18.23
18.73.10
Code
7695
2329
18.23

Description
MATERIAL
welding 500mm dia
500 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (49451.73 - 1130.72) = 48321.01
TOTAL
- 1130.72) = 48804.22
Cost of 5 metre
Cost per metre
Say
Unit
Quantity
Rate
Amount
metre
5.00
9639.00
48195.00
100 metre
0.05
2520.19
126.01
quintal
7.40
152.80 1130.72(A)
49451.73
483.21
49934.94
7320.63
57255.57
11451.11
11451.10

Description
MATERIAL
welding 600mm dia
600mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (65499.37 - 1520.36) = 63979.01
TOTAL
- 1520.36) = 64618.80
Cost of 5 metre
Cost per metre
Say
1306
Unit
Quantity
Rate
Amount
metre
5.00
12758.00
63790.00
100 metre
0.05
3780.28
189.01
quintal
9.95
152.80 1520.36(A)
65499.37
639.79
66139.16
9692.82
75831.98
15166.39
15166.40
18.73.11
Code
7696
2330
18.23

Description
MATERIAL
welding 700mm dia
Carriage of C.I. pipes 500 mm dia
Labour for laying
SH: Water Supply
TOTAL
i.e. on (77519.21 - 1948.20) = 75571.01
TOTAL
- 1948.20) = 76326.72
Cost of 5 metre
Cost per metre
Say
Unit
Quantity
metre
100 metre
5.00
0.05
quintal
12.75
Rate
15089.00
2520.19
Amount
75445.00
126.01
152.80 1948.20(A)
77519.21
755.71
78274.92
11449.01
89723.93
17944.78
17944.80
18.74
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar
and bush of approved quality and colour.
18.74.1
15 mm nominal bore with 30cm length
Code
7862
9988
18.74.2
Code
7863
Description
MATERIAL
15 mm nominal bore and 30 cm length
PVC connection pipe with P.T.M.T. Nuts
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
12.22
Unit
Quantity
each
1.00
Rate
32.00
1.73
Amount
32.00
21.14
53.14
0.53
53.67
8.05
61.72
61.70
15 mm nominal bore with 45 cm length

Description
MATERIAL
15 mm nominal bore and 45 cm length
PVC connection pipe with P.T.M.T. Nuts
1307
Rate
34.00
Amount
34.00
Code
Description
Unit
Quantity
9988

TOTAL
TOTAL
Cost of one no.
Say
L.S.
13.52
Rate
1.73
Amount
23.39
57.39
0.57
57.96
8.69
66.65
66.65
18.75
Providing and fixing PTMT extension nipple for water tank pipe, fittings of
approved quality and colour.
18.75.1
15 mm nominal bore, weighing not less than 32 gms
Code
7864
9988
18.75.2
Code
7865
9988
18.75.3
Code
7866
9988
Description
MATERIAL
P.T.M.T. extension nipple 15mm
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
3.38
Rate
19.00
1.73
Amount
19.00
5.85
24.85
0.25
25.10
3.77
28.87
28.85
20 mm nominal bore, weighing not less than 40 gms

Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
Unit
Quantity
each
L.S.
1.00
3.38
Rate
28.00
1.73
Amount
28.00
5.85
33.85
0.34
34.19
5.13
39.32
39.30
25mm nominal bore, weighing not less than 62 gms

Description
MATERIAL
TOTAL
TOTAL
Cost of one no.
Say
1308
Unit
Quantity
each
L.S.
1.00
3.38
Rate
40.00
1.73
Amount
40.00
5.85
45.85
0.46
46.31
6.95
53.26
53.25
18.76
Cutting holes up to 30x30 cm in walls including making good the same:
18.76.1
With common burnt clay F.P.S. (non modular) bricks
Code
0123
0124
0114
6.4.1
13.4.1
9999
9999
18.77
Description
Details of cost for 10 holes
Size 30x30 cm in 34 cm wall
Labour for cutting holes
Beldar
Brick work with bricks of class designation
75 in cement mortar 1:4 (1 cement : 4
coarse sand)
10x0.30x0.30x0.344m = 0.309 cum
Les 33% for pipe etc. = (-) 0.102 cum
= 0.207 cum Say 0.21 cum
Rate as per item No 6.4.1 of SH :- Brick work.
12 mm cement plaster 1:4 (1 cement :
4 coarse sand)
10x2x0.3x0.3m = 1.80 sqm
Les 33% for pipe etc. = (-) 0.59 sqm
= 1.21 sqm Say 1.20 sqm
SH : Finishing)
Add for delay
Sundries
TOTAL
i.e. on (2086.77 - 1435.34) = 651.43
TOTAL
- 1435.34) = 657.94
Cost of 10 holes
Cost of 1 hole
Say
Unit
Quantity
Rate
Amount
day
day
day
0.16
0.16
1.25
487.00
448.00
368.00
77.92
71.68
460.00
cum
0.21
5801.50
1218.32(A)
sqm
L.S.
L.S.
1.20
16.12
8.06
180.85
1.73
1.73
217.02(A)
27.89
13.94
2086.77
6.51
2093.28
98.69
2191.97
219.19
219.20
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe
etc. and repairing the hole after insertion of drain pipe etc. with cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal
size), including finishing complete so as to make it leak proof.
Code
Description
Unit
Quantity
0123
0124
0114

Average size 15x15x15 cm
Labour for cutting holes
Beldar
2 coarse sand ; 4 graded stone aggregate
20 mm nominal size)
day
day
day
0.83
0.83
1.67
1309
Rate
487.00
448.00
368.00
Amount
404.21
371.84
614.56
Code
4.1.3
9999
9999
9999
18.78
Code
0123
0124
0114
4.2.5
Description
10x0.15x0.15x0.15 m = 0.033 cum
= 0.022 cum Say 0.0.02 cum
Rate as per item no. 4.1.3 of SH : concrete
Work
Finishing top and bottom and making the
holes leak proof
Add for delay
Sundries
TOTAL
i.e. on (1816.91 - 109.64) = 1707.27
TOTAL
- 109.64) = 1724.34
Cost of 10 holes
Cost of 1 hole
Say
Unit
Quantity
Rate
Amount
cum
0.02
5481.95
109.64(A)
L.S.
L.S.
L.S.
121.16
40.30
21.58
1.73
1.73
1.73
209.61
69.72
37.33
1816.91
17.07
1833.98
258.65
2092.63
209.26
209.25
Making chases up to 7.5x7.5 cm in walls including making good and finishing

with matching surface after housing G.I. pipe etc.
Description
Labour for making chases
Beldar
3 coarse sand : 6 graded stone aggregate
20 mm nominal size)
0.075x0.075x10 m = 0.05625 cum
= 0.03769 cum Say 0.04 cum
work
TOTAL
i.e. on (841.46 - 239.71) = 601.75
TOTAL
= 607.77
Cost of 10 metre
Cost of 1 metre
Say
1310
Unit
Quantity
Rate
Amount
day
day
day
0.25
0.25
1.00
487.00
448.00
368.00
121.75
112.00
368.00
cum
0.04
5992.75
239.71(A)
841.46
6.02
847.48
91.17
938.65
93.86
93.85
18.79
Code
4.2.5
9999
Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in

masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand
6 graded stone aggregate 20 mm nominal size) including disposal of malba.
Description
mm nominal size)
0.2x0.2x10 m = 0.40 cum
Les for pipe 3.14x(0.15)/4x10 = (-) 0.177 cum
= 0.223 cum Say 0.22 cum
work
Disposal of malba
TOTAL
i.e. on (1341.80 - 1318.41) = 23.39
TOTAL
= 23.62
Cost of 10 metre
Cost of 1 metre
Say
Unit
Quantity
cum
L.S.
0.22
13.52
Rate
Amount
5992.75 1318.41(A)
1.73
23.39
1341.80
0.23
1342.03
3.54
1345.57
134.55
134.55
18.80
Disinfecting C.I. water mains by flushing with water containing bleaching powder
@ 0.5 gms per litre of water and cleaning the same with fresh water, operation
to be repeated three times including getting the sample of water from the
disinfected main tested in the municipal laboratory.
18.80.1
80 mm diameter C.I. pipe
Code
1301
0116
0114
9999
Description
MATERIAL
Bleaching powder
3x3.14/4x(80/10)x(100x100)/1000x0.5 gms
= 754.28 gms Say 0.008 q
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
Sundries including testing of samples
TOTAL
TOTAL
Cost of 100 metre
Say
1311
Unit
Quantity
Rate
Amount
quintal
0.008
1750.00
14.00
day
day
L.S.
0.33
1.31
9.88
487.00
368.00
1.73
160.71
482.08
17.09
673.88
6.74
680.62
102.09
782.71
782.70
18.80.2
Code
1301
0116
0114
9999
18.80.3
Code
1301
0116
0114
9999
18.80.4

Description
MATERIAL
Bleaching powder
3x3.14/4x(100/10)x(100x100)/1000x0.5 gms
= 1178.57 gms Say 0.012 q
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Unit
Quantity
Rate
Amount
quintal
0.012
1750.00
21.00
day
day
L.S.
0.49
1.64
13.52
487.00
368.00
1.73
238.63
603.52
23.39
886.54
8.87
895.41
134.31
1029.72
1029.70
Unit
Quantity
quintal
0.018
1750.00
31.50
day
day
L.S.
0.66
1.97
17.94
487.00
368.00
1.73
321.42
724.96
31.04
1108.92
11.09
1120.01
168.00
1288.01
1288.00
Unit
Quantity
quintal
0.027

Description
MATERIAL
Bleaching powder
3x3.14/4x(125/10)x(100x100)/1000x0.5 gms
= 1841.52 gms Say 0.018 q
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Rate
Amount
Code
Description
1301

MATERIAL
Bleaching powder
3x3.14/4x(150/10)x(100x100)/1000x0.5 gms
= 2651 gms Say 0.027 q
Bleaching powder
1312
Rate
1750.00
Amount
47.25
Code
0116
0114
9999
18.80.5
Code
1301
0116
0114
9999
18.80.6
Code
1301
0116
0114
9999
Description
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Unit
Quantity
Rate
day
day
L.S.
0.82
2.30
22.88
Unit
Quantity
quintal
0.047
1750.00
82.25
day
day
L.S.
1.15
2.95
31.46
487.00
368.00
1.73
560.05
1085.60
54.43
1782.33
17.82
1800.15
270.02
2070.17
2070.15
Unit
Quantity
quintal
0.074
1750.00
129.50
day
day
L.S.
1.48
3.61
40.30
487.00
368.00
1.73
720.76
1328.48
69.72
2248.46
22.48
2270.94
340.64
2611.58
2611.60
487.00
368.00
1.73
Amount
399.34
846.40
39.58
1332.57
13.33
1345.90
201.89
1547.79
1547.80

Description
MATERIAL
Bleaching powder
3x3.14/4x(200/10)x(100x100)/1000x0.5 gms
= 4712.39 gms Say 0.047 q
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Rate
Amount

Description
MATERIAL
Bleaching powder
3x3.14/4x(250/10)x(100x100)/1000x0.5 gms
= 7363.10 gms Say 0.074 q
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
1313
Rate
Amount
18.80.7
Code
1301
0116
0114
9999
18.80.8
Code
1301
0116
0114
9999
18.80.9
Code
1301
0116
0114

Description
MATERIAL
Bleaching powder
3x3.14/4x(300/10)x(100x100)/1000x0.5 gms
= 10602.88 gms Say 0.106 q
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Unit
Quantity
Rate
Amount
quintal
0.106
1750.00
185.50
day
day
L.S.
1.64
3.94
44.46
487.00
368.00
1.73
798.68
1449.92
76.92
2511.02
25.11
2536.13
380.42
2916.55
2916.55
Unit
Quantity
quintal
0.144
1750.00
252.00
day
day
L.S.
1.80
4.27
48.36
487.00
368.00
1.73
876.60
1571.36
83.66
2783.62
27.84
2811.46
421.72
3233.18
3233.20
Unit
Quantity
quintal
0.189
1750.00
330.75
day
day
1.97
4.59
487.00
368.00
959.39
1689.12

Description
MATERIAL
Bleaching powder
3x3.14/4x(350/10)x(100x100)/1000x0.5 gms
= 14431.70 gms Say 0.144 q
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Rate
Amount

Description
MATERIAL
Bleaching powder
3x3.14/4x(400/10)x(100x100)/1000x0.5 gms
= 18849.60 gms Say 0.189 q
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
1314
Rate
Amount
Code
Description
Unit
Quantity
9999

TOTAL
TOTAL
Cost of 100 metre
Say
L.S.
53.82
Unit
Quantity
quintal
0.239
1750.00
418.25
day
day
L.S.
2.13
4.92
58.24
487.00
368.00
1.73
1037.31
1810.56
100.76
3366.88
33.67
3400.55
510.08
3910.63
3910.65
Unit
Quantity
quintal
0.295
1750.00
516.25
day
day
L.S.
2.30
5.25
63.7
487.00
368.00
1.73
1120.10
1932.00
110.20
3678.55
36.79
3715.34
557.30
4272.64
4272.65
18.80.10
Code
1301
0116
0114
9999
18.80.11
Code
1301
0116
0114
9999
Rate
1.73
Amount
93.11
3072.37
30.72
3103.09
465.46
3568.55
3568.55

Description
MATERIAL
Bleaching powder
3x3.14/4x(450/10)x(100x100)/1000x0.5 gms
= 23856.50 gms Say 0.239 q
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Rate
Amount

Description
MATERIAL
Bleaching powder
3x3.14/4x(500/10)x(100x100)/1000x0.5 gms
= 29452.40 gms Say 0.295 q
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
1315
Rate
Amount
18.80.12
Code
1301
0116
0114
9999

Description
MATERIAL
Bleaching powder
3x3.14/4x(600/10)x(100x100)/1000x0.5 gms
= 42411.5 gms Say 0.424 q
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Unit
Quantity
Rate
Amount
quintal
0.424
1750.00
742.00
day
day
L.S.
2.62
5.91
71.37
487.00
368.00
1.73
1275.94
2174.88
123.47
4316.29
43.16
4359.45
653.92
5013.37
5013.35
18.81
Extra for every operation of disinfecting the C.I. main by flushing with water
containing bleaching powder @ 0.5 gms per litre of water and cleaning the same
with fresh water, including getting the samples of water tested in the municipal
laboratory :
18.81.1
Code
1301
0116
0114
9999
18.81.2
Code
1301
0116
0114
Description
MATERIAL
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Unit
Quantity
Rate
Amount
quintal
0.003
1750.00
5.25
day
day
L.S.
0.11
0.49
4.42
487.00
368.00
1.73
53.57
180.32
7.65
246.79
2.47
249.26
37.39
286.65
286.65
Unit
Quantity
quintal
0.004
1750.00
7.00
day
day
0.16
0.57
487.00
368.00
77.92
209.76

Description
MATERIAL
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
1316
Rate
Amount
Code
Description
Unit
Quantity
9999

TOTAL
TOTAL
Cost of 100 metre
Say
L.S.
4.42
Unit
Quantity
quintal
0.006
1750.00
10.50
day
day
L.S.
0.22
0.66
5.46
487.00
368.00
1.73
107.14
242.88
9.45
369.97
3.70
373.67
56.05
429.72
429.70
Unit
Quantity
quintal
0.009
1750.00
15.75
day
day
L.S.
0.27
0.74
7.15
487.00
368.00
1.73
131.49
272.32
12.37
431.93
4.32
436.25
65.44
501.69
501.70
Unit
Quantity
quintal
0.016
18.81.3
Code
1301
0116
0114
9999
18.81.4
Code
1301
0116
0114
9999
18.81.5
Rate
1.73
Amount
7.65
302.33
3.02
305.35
45.80
351.15
351.15

Description
MATERIAL
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Rate
Amount

Description
MATERIAL
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Rate
Amount
Code
Description
1301

MATERIAL
Bleaching powder
1317
Rate
1750.00
Amount
28.00
Code
0116
0114
9999
18.81.6
Code
1301
0116
0114
9999
18.81.7
Code
1301
0116
0114
9999
Description
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Unit
Quantity
Rate
day
day
L.S.
0.58
0.90
9.88
Unit
Quantity
quintal
0.025
1750.00
43.75
day
day
L.S.
0.60
1.10
10.79
487.00
368.00
1.73
292.20
404.80
18.67
759.42
7.59
767.01
115.05
882.06
882.05
Unit
Quantity
quintal
0.035
1750.00
61.25
day
day
L.S.
0.60
1.30
13.52
487.00
368.00
1.73
292.20
478.40
23.39
855.24
8.55
863.79
129.57
993.36
993.35
487.00
368.00
1.73
Amount
282.46
331.20
17.09
658.75
6.59
665.34
99.80
765.14
765.15

Description
MATERIAL
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Rate
Amount

Description
MATERIAL
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
1318
Rate
Amount
18.81.8
Code
1301
0116
0114
9999
18.81.9
Code
1301
0116
0114
9999
18.81.10
Code
1301
0116
0114
9999

Description
MATERIAL
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Unit
Quantity
Rate
Amount
quintal
0.048
1750.00
84.00
day
day
L.S.
0.70
1.50
16.12
487.00
368.00
1.73
340.90
552.00
27.89
1004.79
10.05
1014.84
152.23
1167.07
1167.05
Unit
Quantity
quintal
0.063
1750.00
110.25
day
day
L.S.
0.80
1.70
17.94
487.00
368.00
1.73
389.60
625.60
31.04
1156.49
11.56
1168.05
175.21
1343.26
1343.25
Unit
Quantity
quintal
0.08
1750.00
140.00
day
day
L.S.
0.90
1.90
20.67
487.00
368.00
1.73
438.30
699.20
35.76
1313.26
13.13
1326.39
198.96
1525.35
1525.35

Description
MATERIAL
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Rate
Amount

Description
MATERIAL
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
1319
Rate
Amount
18.81.11
Code
1301
0116
0114
9999
18.81.12
Code
1301
0116
0114
9999

Description
MATERIAL
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Unit
Quantity
Rate
Amount
quintal
0.098
1750.00
171.50
day
day
L.S.
1.00
2.10
23.27
487.00
368.00
1.73
487.00
772.80
40.26
1471.56
14.72
1486.28
222.94
1709.22
1709.20
Unit
Quantity
quintal
0.141
1750.00
246.75
day
day
L.S.
1.20
2.50
26.00
487.00
368.00
1.73
584.40
920.00
44.98
1796.13
17.96
1814.09
272.11
2086.20
2086.20

Description
MATERIAL
Bleaching powder
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 100 metre
Say
Rate
Amount
18.82
Dismantling old C.I. pipes including excavation and refilling trenches after taking
out the pipes, breaking lead caulked joints, melting of lead and making into
blocks, including stacking of pipes at site lead up to 50 metre:
18.82.1
Code
2.8.1
2.25
Description
Details of cost for 40.26 m or 11 nos. joints.
1x40.26x55x0.75 m=16.61 cum
Deduct for pipe 1x40.26x3.14/4x(0.098)
=(-) 0.30 cum
Total= 16.31 cum
(Rate as per item No.2.25 of SH Earth work)
Breaking lead caulked joints, blocks and
stacking
1320
Unit
Quantity
cum
cum
16.31
16.31
Rate
166.40
125.75
Amount
2713.98(A)
2050.98(A)
Code
0761
0771
0117
0114
9988
18.82.2
Code
2.8.1
2.25
0761
0771
0117
0114
9988
Description
MATERIAL
Fuel wood
Kerosene oil
LABOUR
Beldar
Sundries and carriage
TOTAL
i.e. on (6757.63 - 4764.96) = 1992.67
TOTAL
- 4764.96) = 2012.60
Cost of 40.26 metre
Cost of one metre
Say
Unit
Quantity
Rate
Amount
quintal
litre
0.373
0.379
500.00
45.00
186.50
17.06
day
day
L.S.
0.50
4.00
53.82
448.00
368.00
1.73
224.00
1472.00
93.11
6757.63
19.93
6777.56
301.89
7079.45
175.84
175.85

Description
1x40.26x55x0.75 m=16.61 cum
=(-) 0.44 cum
Total= 16.17 cum
stacking
MATERIAL
Fuel wood
Kerosene oil
LABOUR
Beldar
TOTAL
i.e. on (7005.48 - 4724.07) = 2281.41
TOTAL
= 2304.22
Cost of 40.26 metre
Cost of one metre
Say
1321
Unit
Quantity
Rate
Amount
cum
cum
16.17
16.17
166.40 2690.69(A)
125.75 2033.38(A)
quintal
litre
0.466
0.379
500.00
45.00
233.00
17.06
day
day
L.S.
0.63
4.50
53.82
448.00
368.00
1.73
282.24
1656.00
93.11
7005.48
22.81
7028.29
345.63
7373.92
183.15
183.15
18.82.3
Code
2.8.1
2.25
0761
0771
0117
0114
9988
18.82.4
Code
2.8.1
2.25
0761
0771
0117
0114

Description
1x40.26x55x0.75 m=16.61 cum
=(-) 0.65 cum
Total= 15.96 cum
stacking
MATERIAL
Fuel wood
Kerosene oil
LABOUR
Beldar
TOTAL
i.e. on (7236.88 - 4662.71) = 2574.17
TOTAL
= 2599.91
Cost of 40.26 metre
Cost of one metre
Say
Unit
Quantity
Rate
Amount
cum
cum
15.96
15.96
166.40 2655.74(A)
125.75 2006.97(A)
quintal
litre
0.559
0.568
500.00
45.00
279.50
25.56
day
day
L.S.
0.75
5.00
53.82
448.00
368.00
1.73
336.00
1840.00
93.11
7236.88
25.74
7262.62
389.99
7652.61
190.07
190.05

Description
1x40.26x55x0.75 m=16.61 cum
=(-) 0.91 cum
Total= 15.70 cum
stacking
MATERIAL
Fuel wood
Kerosene oil
LABOUR
Beldar
1322
Unit
Quantity
Rate
Amount
cum
cum
15.70
15.70
166.40 2612.48(A)
125.75 1974.28(A)
quintal
litre
0.653
0.568
500.00
45.00
326.50
25.56
day
day
0.88
5.50
448.00
368.00
394.24
2024.00
Code
Description
Unit
Quantity
9988

TOTAL
i.e. on (7473.33 - 4586.76) = 2886.57
TOTAL
= 2915.44
Cost of 40.26 metre
Cost of one metre
Say
L.S.
67.21
18.82.5
Code
2.8.1
2.25
0761
0771
0117
0114
9988
Rate
1.73
Amount
116.27
7473.33
28.87
7502.20
437.32
7939.52
197.20
197.20

Description
1x40.26x60x0.75 m=18.12 cum
=(-) 1.56 cum
Total= 16.56 cum
stacking
MATERIAL
Fuel wood
Kerosene oil
LABOUR
Beldar
TOTAL
i.e. on (8293.16 - 4838.00) = 3455.16
TOTAL
= 3489.71
Cost of 40.26 metre
Cost of one metre
Say
1323
Unit
Quantity
Rate
Amount
cum
cum
16.56
16.56
quintal
litre
0.84
0.7576
500.00
45.00
420.00
34.09
day
day
L.S.
1.10
6.50
67.21
448.00
368.00
1.73
492.80
2392.00
116.27
8293.16
166.40 2755.58(A)
125.75 2082.42(A)
34.55
8327.71
523.46
8851.17
219.85
219.85
18.82.6
Code
2.8.1
2.25
0761
0771
0117
0114
9988
18.82.7
Code
2.8.1
2.25
0761
0771
0117
0114

Description
1x40.26x.65x0.75 m=19.63 cum
=(-) 2.37 cum
Total= 17.26 cum
stacking
MATERIAL
Fuel wood
Kerosene oil
LABOUR
Beldar
TOTAL
i.e. on (9088.71 - 5042.51) = 4046.20
TOTAL
- 5042.51) = 4086.66
Cost of 40.26 metre
Cost of one metre
Say
Unit
Quantity
Rate
Amount
cum
cum
17.26
17.26
quintal
litre
1.026
1.1365
500.00
45.00
513.00
51.14
day
day
L.S.
1.30
7.50
80.73
448.00
368.00
1.73
582.40
2760.00
139.66
9088.71
166.40 2872.06(A)
125.75 2170.45(A)
40.46
9129.17
613.00
9742.17
241.98
242.00

Description
1x40.26x.70x0.75 m=21.14 cum
=(-) 3.36 cum
Total= 17.79 cum
stacking
MATERIAL
Fuel wood
Kerosene oil
LABOUR
Beldar
1324
Unit
Quantity
Rate
Amount
cum
cum
17.79
17.79
166.40 2960.26(A)
125.75 2237.09(A)
quintal
litre
1.12
1.515
500.00
45.00
560.00
68.18
day
day
1.50
8.50
448.00
368.00
672.00
3128.00
Code
Description
Unit
Quantity
9988

TOTAL
i.e. on (9788.36 - 5197.35) = 4591.01
TOTAL
- 5197.35) = 4636.92
Cost of 40.26 metre
Cost of one metre
Say
L.S.
94.12
18.82.8
Code
2.8.1
2.25
0761
0771
0117
0114
9988
18.82.9
Code
Rate
1.73
Amount
162.83
9788.36
45.91
9834.27
695.54
10529.81
261.54
261.55

Description
1x40.26x.75x0.75 m=22.65 cum
=(-) 4.51 cum
Total= 18.14 cum
stacking
MATERIAL
Fuel wood
Kerosene oil
LABOUR
Beldar
TOTAL
i.e. on (10440.51 - 5299.61) = 5140.90
TOTAL
- 5299.61) = 5192.31
Cost of 40.26 metre
Cost of one metre
Say
Unit
Quantity
Rate
Amount
cum
cum
18.14
18.14
166.40 3018.50(A)
125.75 2281.11(A)
quintal
litre
1.213
1.515
500.00
45.00
606.50
68.18
day
day
L.S.
1.75
9.50
107.64
448.00
368.00
1.73
784.00
3496.00
186.22
10440.51
51.41
10491.92
778.85
11270.77
279.94
279.95

Description
Unit

1x40.26x.80x0.75 m=24.16 cum
1325
Quantity
Rate
Amount
Code
2.8.1
2.25
0761
0771
0117
0114
9988
18.82.10
Code
2.8.1
2.25
0761
0771
0117
0114
9988
Description
=(-) 5.93 cum
Total= 18.23 cum
stacking
MATERIAL
Fuel wood
Kerosene oil
LABOUR
Beldar
TOTAL
i.e. on (11033.50 - 5325.89) = 5707.61
TOTAL
- 5325.89) = 5764.69
Cost of 40.26 metre
Cost of one metre
Say
Unit
Quantity
Rate
Amount
cum
cum
18.23
18.23
166.40 3033.47(A)
125.75 2292.42(A)
quintal
litre
1.306
1.894
500.00
45.00
653.00
85.23
day
day
L.S.
2.00
10.50
121.03
448.00
368.00
1.73
896.00
3864.00
209.38
11033.50
57.08
11090.58
864.70
11955.28
296.95
296.95

Description
1x40.26x.85x0.75 m=25.67 cum
=(-) 7.29 cum
Total= 18.38 cum
stacking
MATERIAL
Fuel wood
Kerosene oil
LABOUR
Beldar
TOTAL
i.e. on (11644.78 - 5369.72) = 6275.06
TOTAL
= 6337.81
Cost of 40.26 metre
Cost of one metre
Say
1326
Unit
Quantity
Rate
Amount
cum
cum
18.38
18.38
166.40 3058.43(A)
125.75 2311.29(A)
quintal
litre
1.40
2.273
500.00
45.00
700.00
102.29
day
day
L.S.
2.25
11.50
134.55
448.00
368.00
1.73
1008.00
4232.00
232.77
11644.78
62.75
11707.53
950.67
12658.20
314.41
314.40
18.82.11
Code
2.8.1
2.25
0761
0771
0117
0114
9988
18.82.12
Code
2.8.1
2.25
0761
0771
0117
0114

Description
1x40.26x.90x0.75 m=27.18 cum
=(-) 8.94 cum
Total= 18.24 cum
stacking
MATERIAL
Fuel wood
Kerosene oil
LABOUR
Beldar
TOTAL
i.e. on (12170.10 - 5328.82) = 6841.28
TOTAL
- 5328.82) = 6909.69
Cost of 40.26 metre
Cost of one metre
Say
Unit
Quantity
Rate
Amount
cum
cum
18.24
18.24
166.40 3035.14(A)
125.75 2293.68(A)
quintal
litre
1.492
2.652
500.00
45.00
746.00
119.34
day
day
L.S.
2.50
12.50
147.94
448.00
368.00
1.73
1120.00
4600.00
255.94
12170.10
68.41
12238.51
1036.45
13274.96
329.73
329.75

Description
1x40.26x1.00x0.75 m=30.20 cum
=(-) 12.76 cum
Total= 17.44 cum
stacking
MATERIAL
Fuel wood
Kerosene oil
LABOUR
Beldar
1327
Unit
Quantity
Rate
Amount
cum
cum
17.44
17.44
quintal
litre
1.68
3.41
500.00
45.00
840.00
153.45
day
day
3.00
14.50
448.00
368.00
1344.00
5336.00
166.40 2902.02(A)
125.75 2193.08(A)
Code
Description
Unit
Quantity
9988

TOTAL
i.e. on (13071.04 - 5095.10) = 7975.94
TOTAL
- 5095.10) = 8055.70
Cost of 40.26 metre
Cost of one metre
Say
L.S.
174.85
18.83.1
0116
0114
9999
18.83.2
Code
0116
0114
9999
18.83.3
Detail of cost for one cut.

LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of each cut
Say
302.49
13071.04
1208.36
14359.16
356.66
356.65
Labour for cutting C.I. pipe with steel saw.
Description
1.73
Amount
79.76
13150.80
18.83
Code
Rate
Unit
Quantity
day
day
L.S.
0.06
0.06
1.82
Unit
Quantity
day
day
L.S.
0.08
0.08
2.73
Rate
487.00
368.00
1.73
Amount
29.22
22.08
3.15
54.45
0.54
54.99
8.25
63.24
63.25

Description
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of each cut
Say
Rate
487.00
368.00
1.73
Amount
38.96
29.44
4.72
73.12
0.73
73.85
11.08
84.93
84.95
Code
Description
Unit
Quantity
0116
0114

LABOUR
Fitter (grade 1)
Beldar
day
day
0.11
0.11
1328
Rate
487.00
368.00
Amount
53.57
40.48
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of each cut
Say
L.S.
4.42
Unit
Quantity
day
day
L.S.
0.15
0.15
5.33
Unit
Quantity
day
day
L.S.
0.20
0.20
7.15
Unit
Quantity
day
day
L.S.
0.25
0.25
8.06
18.83.4
Code
0116
0114
9999
18.83.5
Code
0116
0114
9999
18.83.6
Code
0116
0114
9999
Rate
1.73
Amount
7.65
101.70
1.02
102.72
15.41
118.13
118.15

Description
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of each cut
Say
Rate
487.00
368.00
1.73
Amount
73.05
55.20
9.22
137.47
1.37
138.84
20.83
159.67
159.65

Description
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of each cut
Say
Rate
487.00
368.00
1.73
Amount
97.40
73.60
12.37
183.37
1.83
185.20
27.78
212.98
213.00

Description
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of each cut
Say
1329
Rate
487.00
368.00
1.73
Amount
121.75
92.00
13.94
227.69
2.28
229.97
34.50
264.47
264.45
18.83.7
Code
0116
0114
9999
18.83.8
Code
0116
0114
9999
18.83.9
Code
0116
0114
9999
18.83.10

Description
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of each cut
Say
Unit
Quantity
day
day
L.S.
0.30
0.30
9.88
Unit
Quantity
day
day
L.S.
0.35
0.35
10.79
Unit
Quantity
day
day
L.S.
0.40
0.40
12.48
Rate
487.00
368.00
1.73
Amount
146.10
110.40
17.09
273.59
2.74
276.33
41.45
317.78
317.80

Description
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of each cut
Say
Rate
487.00
368.00
1.73
Amount
170.45
128.80
18.67
317.92
3.18
321.10
48.17
369.27
369.25

Description
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of each cut
Say
Rate
487.00
368.00
1.73
Amount
194.80
147.20
21.59
363.59
3.64
367.23
55.08
422.31
422.30
Code
Description
Unit
Quantity
0116
0114

LABOUR
Fitter (grade 1)
Beldar
day
day
0.45
0.45
1330
Rate
487.00
368.00
Amount
219.15
165.60
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of each cut
Say
L.S.
13.52
Unit
Quantity
day
day
L.S.
0.50
0.50
15.21
Unit
Quantity
day
day
L.S.
0.60
0.60
16.12
18.83.11
Code
0116
0114
9999
18.83.12
Code
0116
0114
9999
Rate
1.73
Amount
23.39
408.14
4.08
412.22
61.83
474.05
474.05

Description
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of each cut
Say
Rate
487.00
368.00
1.73
Amount
243.50
184.00
26.31
453.81
4.54
458.35
68.75
527.10
527.10

Description
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of each cut
Say
Rate
487.00
368.00
1.73
Amount
292.20
220.80
27.89
540.89
5.41
546.30
81.95
628.25
628.25
18.84
Providing & fixing chrome plated brass battery based infrared sensor operated
pillar cock, having foam flow technology.
18.84.1
15 mm nominal bore
Code
Description
3327

MATERIAL
15 mm Battery Based Sensor Pillar Cock
1331
Unit
Quantity
each
1.00
Rate
5800.00
Amount
5800.00
Code
Description
Unit
Quantity
9988

TOTAL
TOTAL
Cost of one no.
Say
L.S.
8.06
18.85
Rate
1.73
Amount
13.94
5813.94
58.14
5872.08
880.81
6752.89
6752.90
Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per
JIS standard 3448 complete with press type fitting (fitting shall be paid for
separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting
and making good the walls including testing of joints complete as per direction
of Engineer-in-charge. (The pipe length inserted in the fitting shall not be
measured for payment)
Inernal work - Exposed on wall
18.85.1
Code
8779
2272
9999
0116
0117
0114
18.85.2
Code
8780
15.88 mm outer dia pipe

Description
MATERIAL
SS pipe 304 grades with press fit technology
as per JIS 3448 standard 15.88 mm outer dia
Carriage of Stainless Steel pipes below
100 mm dia
Add 3% for pipe inserted into fitting and
wastage etc. on X
3 * X / 100
Add 2% for special T&P and sundries etc.
on X
2 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
metre
10.00
142.00
1420.00(X)
tonne
0.00301
92.24
0.28
42.60
L.S.
2.73
1.73
4.72
28.40
day
day
day
0.33
0.66
0.66
Unit
Quantity
metre
10.00
487.00
448.00
368.00
160.71
295.68
242.88
2195.27
21.95
2217.22
332.58
2549.80
254.98
255.00
22.22 mm outer dia Pipe

Description
MATERIAL
1332
Rate
254.00
Amount
2540.00(X)
Code
Description
2272

100 mm dia
wastage etc. on X
3 * X / 100
on X
2 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
9999
0116
0117
0114
18.85.3
Code
8781
2272
9999
0116
0117
0114
Unit
tonne
Quantity
0.00529
Rate
92.24
Amount
0.49
76.20
L.S.
2.73
1.73
4.72
50.80
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
3371.48
33.71
3405.19
510.78
3915.97
391.59
391.60
Unit
Quantity
metre
10.00
324.00
3240.00(X)
tonne
0.00687
92.24
0.63

Description
MATERIAL
100 mm dia
wastage etc. on X
3 * X / 100
on X
2 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
1333
Rate
Amount
97.20
L.S.
4.16
1.73
7.20
64.80
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
4109.10
41.09
4150.19
622.53
4772.72
477.27
477.25
18.85.4
Code
8782
2272
9999
0116
0117
0114
18.85.5
Code
8783
2272
9999
0116
0117
0114

Description
MATERIAL
100 mm dia
wastage etc. on X
3 * X / 100
on X
2 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
metre
10.00
462.00
4620.00(X)
tonne
0.0098
92.24
0.90
138.60
L.S.
4.16
1.73
7.20
92.40
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
5558.37
55.58
5613.95
842.09
6456.04
645.60
645.60
Unit
Quantity
metre
10.00
479.00
4790.00(X)
tonne
0.0124
92.24
1.14

Description
MATERIAL
100 mm dia
wastage etc. on X
3 * X / 100
on X
2 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
1334
Rate
Amount
143.70
L.S.
5.33
1.73
9.22
95.80
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
5739.13
57.39
5796.52
869.48
6666.00
666.60
666.60
18.85.6
Code
8701
2272
9999
0116
0117
0114
18.86

Description
MATERIAL
100 mm dia
wastage etc. on X
3 * X / 100
on X
2 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Cost of 10 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
metre
10.00
584.00
5840.00(X)
tonne
0.0142
92.24
1.31
175.20
L.S.
5.33
1.73
9.22
116.80
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
6841.80
68.42
6910.22
1036.53
7946.75
794.67
794.65
Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per
JIS standard 3448 complete with press type fitting (fitting shall be paid for
separately) i/c fixing of the pipe with clamps at 1.00m spacing and also
including cutting of chases and making good the walls including testing of
joints complete as per direction of Engineer -in-charge. (The pipe length
inserted in the fitting shall not be measured for payment)
Internal work - Concealed Pipe
18.86.1
Code
8779
2272
18.78
15.88 mm outer dia .Pipes.

Description
MATERIAL
SS pipe 304 grades with press fit
technology as per JIS 3448 standard
15.88 mm outer dia
wastage etc. on X
3 * X / 100
100 mm dia
Making chases upto 7.5x7.5 cm.in walls
Rate as per Item No.18.78 of SH:WATER
SUPPLY
on X
2 * X / 100
1335
Unit
Quantity
metre
10.00
Rate
Amount
142.00 1420.00(X)
42.60
tonne
0.00301
92.24
0.28
metre
10.00
93.85
938.50(A)
28.40
Code
0116
0117
0114
18.86.2
Code
8780
2272
18.78
0116
0117
0114
Description
LABOUR
Fitter (grade 1)
Beldar
TOTAL
i.e. on (3129.05 - 938.50) = 2190.55
TOTAL
= 2212.46
Cost of 10 metre
Cost of 1 metre
Say
Unit
Quantity
day
day
day
0.33
0.66
0.66
Rate
487.00
448.00
368.00
Amount
160.71
295.68
242.88
3129.05
21.91
3150.96
331.87
3482.83
348.28
348.30
22.22 mm Outer dia pipes

Description
MATERIAL
wastage etc. on X
3 * X / 100
100 mm dia
Making chases upto 7.5x7.5 cm.in walls
Rate as per Item No.18.78 of SH: WATER
SUPPLY
on X
2 * X / 100
LABOUR
Fitter (grade 1)
Beldar
TOTAL
i.e. on (4305.26 - 938.50) = 3366.76
TOTAL
= 3400.43
Cost of 10 metre
Cost of 1 metre
Say
1336
Unit
Quantity
metre
10.00
Rate
254.00
Amount
2540.00(X)
76.20
tonne
0.00529
92.24
0.49
metre
10.00
93.85
938.50(A)
50.80
day
day
day
0.33
0.66
0.66
487.00
448.00
368.00
160.71
295.68
242.88
4305.26
33.67
4338.93
510.06
4848.99
484.89
484.90
18.87
Providing and fixing required Stainless Steel Fitting of press fit design of grade
AISI 304 conforming to JWWA G116 standard with V-profile or M-profile and
with O-ring sealing gasket of EPDM material of required dia as per direction
of Engineer-in-charge.
Coupling/Socket
18.87.1
Code
8702
18.87.2
Code
8786
18.87.3
Code
8787
For 15.88 mm outer dia pipe

Description
MATERIAL
Coupling/Socket fittings for 15.88 mm
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Rate
42.00
Amount
42.00
42.00
0.42
42.42
6.36
48.78
48.80

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
63.00
Amount
63.00
63.00
0.63
63.63
9.54
73.17
73.15

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
1337
Rate
89.00
Amount
89.00
89.00
0.89
89.89
13.48
103.37
103.35
18.87.4
Code
8788
18.87.5
Code
8789
18.87.6
Code
8790
18.88

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Rate
131.00
Amount
131.00
131.00
1.31
132.31
19.85
152.16
152.15

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
158.00
Amount
158.00
158.00
1.58
159.58
23.94
183.52
183.50

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
180.00
Amount
180.00
180.00
1.80
181.80
27.27
209.07
209.05
with O-ring sealing gasket of EPDM material of providing and fixing required
Stainless Steel Fitting of press fit design of grade AISI 304 conforming toJWWA
G116 standard with V-profile or M-profile and with O-ring sealing gasket of
EPDM material of required dia as per dirction of Engineer-in-charge.
Reducer
1338
18.88.1
Code
8791
18.88.2
Code
8792
18.88.3
Code
8793
18.88.4
Code
8794
For 22.22 mm x 15.88 mm outer dia pipe

Description
MATERIAL
Reducer for 22.22 mm X 15.88 mm outer
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
103.00
Amount
103.00
103.00
1.03
104.03
15.60
119.63
119.65

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
141.00
Amount
141.00
141.00
1.41
142.41
21.36
163.77
163.75

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
145.00
Amount
145.00
145.00
1.45
146.45
21.97
168.42
168.40

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
1339
Unit
Quantity
each
1.00
Rate
184.00
Amount
184.00
184.00
1.84
185.84
27.88
213.72
213.70
18.88.5
Code
8795
18.88.6
Code
8796
18.88.7
Code
8797
18.88.8
Code
8798

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
187.00
Amount
187.00
187.00
1.87
188.87
28.33
217.20
217.20

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
190.00
Amount
190.00
190.00
1.90
191.90
28.79
220.69
220.70

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
359.00
Amount
359.00
359.00
3.59
362.59
54.39
416.98
417.00

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
1340
Unit
Quantity
each
1.00
Rate
362.00
Amount
362.00
362.00
3.62
365.62
54.84
420.46
420.45
18.88.9
Code
8799
18.88.10
Code
8800
18.88.11
Code
8801
18.88.12
Code
8802

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
362.00
Amount
362.00
362.00
3.62
365.62
54.84
420.46
420.45

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
387.00
Amount
387.00
387.00
3.87
390.87
58.63
449.50
449.50

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
410.00
Amount
410.00
410.00
4.10
414.10
62.12
476.22
476.20

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
1341
Unit
Quantity
each
1.00
Rate
410.00
Amount
410.00
410.00
4.10
414.10
62.12
476.22
476.20
18.88.13
Code
8803
18.88.14
Code
8804
18.88.15
Code
8805
18.89

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
410.00
Amount
410.00
410.00
4.10
414.10
62.12
476.22
476.20

Description
MATERIAL
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
410.00
Amount
410.00
410.00
4.10
414.10
62.12
476.22
476.20

Description
MATERIAL
Reducer for48.60 mm X 42.70 mm outer
Dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
410.00
Amount
410.00
410.00
4.10
414.10
62.12
476.22
476.20
Slip Coupling/ Socket
18.89.1
Code

Description
Unit

MATERIAL
1342
Quantity
Rate
Amount
Code
Description
8806
Slip Coupling / Socket 15.88 mm outer

dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
18.89.2
Code
8807
18.89.3
Code
8808
18.89.4
Code
8809
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Rate
47.00
Amount
47.00
47.00
0.47
47.47
7.12
54.59
54.60

Description
MATERIAL
Slip Coupling / Socket 22.22 mm outer dia
SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
63.00
Amount
63.00
63.00
0.63
63.63
9.54
73.17
73.15

Description
MATERIAL
SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
89.00
Amount
89.00
89.00
0.89
89.89
13.48
103.37
103.35

Description
MATERIAL
SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
1343
Rate
131.00
Amount
131.00
131.00
1.31
132.31
19.85
152.16
152.15
18.89.5
Code
8810
18.89.6
Code
8811
18.90

Description
MATERIAL
SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Rate
158.00
Amount
158.00
158.00
1.58
159.58
23.94
183.52
183.50

Description
MATERIAL
SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
170.00
Amount
170.00
170.00
1.70
171.70
25.76
197.46
197.45
Elbow 90
18.90.1
Code
8812
For 15.88mm outer dia pipe

Description
MATERIAL
Elbow 90 for 15.88 mm outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
1344
Unit
Quantity
each
1.00
Rate
58.00
Amount
58.00
58.00
0.58
58.58
8.79
67.37
67.35
18.90.2
Code
8813
18.90.3
Code
8814
18.90.4
Code
8815
18.90.5
Code
8816

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Rate
63.00
Amount
63.00
63.00
0.63
63.63
9.54
73.17
73.15

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
96.00
Amount
96.00
96.00
0.96
96.96
14.54
111.50
111.50

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
109.00
Amount
109.00
109.00
1.09
110.09
16.51
126.60
126.60

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
1345
Rate
116.00
Amount
116.00
116.00
1.16
117.16
17.57
134.73
134.75
18.90.6
Code
8817
18.91

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
150.00
Amount
150.00
150.00
1.50
151.50
22.73
174.23
174.25
Reducing Elbow 90
18.91.1
Code
8818
18.91.2
Code
8819
For22.22 mm x 15.88 mm outer dia pipe

Description
MATERIAL
Reducing Elbow 90 for 22.22 mm X
15.88 mm outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
148.00
Amount
148.00
148.00
1.48
149.48
22.42
171.90
171.90

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
1346
Unit
Quantity
each
1.00
Rate
191.00
Amount
191.00
191.00
1.91
192.91
28.94
221.85
221.85
18.91.3
Code
8820
18.91.4
Code
8821
18.91.5
Code
8822
18.91.6
Code

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
221.00
Amount
221.00
221.00
2.21
223.21
33.48
256.69
256.70

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
287.00
Amount
287.00
287.00
2.87
289.87
43.48
333.35
333.35

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
396.00
Amount
396.00
396.00
3.96
399.96
59.99
459.95
459.95

Description
Unit

MATERIAL
1347
Quantity
Rate
Amount
Code
Description
8823

TOTAL
TOTAL
Cost of 1 no.
Say
18.92
Unit
Quantity
each
1.00
Rate
179.00
Amount
179.00
179.00
1.79
180.79
27.12
207.91
207.90
Equal Tee
18.92.1
Code
8824
18.92.2
Code
8825
18.92.3
Code

Description
MATERIAL
Equal Tee for 15.88 mm outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Unit
Quantity
Rate
159.00
Amount
159.00
159.00
1.59
160.59
24.09
184.68
184.70

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
231.00
Amount
231.00
231.00
2.31
233.31
35.00
268.31
268.30

Description
MATERIAL
1348
Rate
Amount
Code
Description
8826

TOTAL
TOTAL
Cost of 1 no.
Say
18.92.4
Code
8827
18.92.5
Code
8828
18.92.6
Code
8829
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Rate
273.00
Amount
273.00
273.00
2.73
275.73
41.36
317.09
317.10

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
437.00
Amount
437.00
437.00
4.37
441.37
66.21
507.58
507.60

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
1349
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25
18.93
Reducing Tee
18.93.1
Code
8830
18.93.2
Code
8831
18.93.3
Code
8832

Description
MATERIAL
Reducing Tee for 22.22 mm X 15.88 mm
outer dia SS
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
179.00
Amount
179.00
179.00
1.79
180.79
27.12
207.91
207.90

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
273.00
Amount
273.00
273.00
2.73
275.73
41.36
317.09
317.10

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
1350
Unit
Quantity
each
1.00
Rate
273.00
Amount
273.00
273.00
2.73
275.73
41.36
317.09
317.10
18.93.4
Code
8833
18.93.5
Code
8834
18.93.6
Code
8835
18.93.7
Code

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
437.00
Amount
437.00
437.00
4.37
441.37
66.21
507.58
507.60

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
437.00
Amount
437.00
437.00
4.37
441.37
66.21
507.58
507.60

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
437.00
Amount
437.00
437.00
4.37
441.37
66.21
507.58
507.60

Description
Unit

MATERIAL
1351
Quantity
Rate
Amount
Code
Description
8836

outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
18.93.8
Code
8837
18.93.9
Code
8838
18.93.10
Code
8839
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
1352
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30
18.93.11
Code
8840
18.93.12
Code
8841
18.93.13
Code
8842

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25

Description
MATERIAL
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
1353
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25
18.93.14
Code
8843
18.93.15
Code
8844
18.94

Description
MATERIAL
Reducing Tee for 48.60mm X 34.00 mm
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25

Description
MATERIAL
Reducing Tee for 48.60mm X 42.70mm
outer dia SS pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25
Male Thread Tee
18.94.1
Code
8845
For 15.88 mm outer dia x 15 mm nominal dia threaded

Description
MATERIAL
Stainless steel Male thread Tee for 15.88
mm outer dia X 15 mm nominal dia
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1354
Unit
Quantity
each
1.00
Rate
179.00
Amount
179.00
179.00
1.79
180.79
27.12
207.91
207.90
18.94.2
Code
8846
18.94.3
Code
8847
18.94.4
Code
8848

Description
MATERIAL
Stainless steel Male thread Tee for 22.22
mm outer dia X 15 mm nominal dia
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
200.00
Amount
200.00
200.00
2.00
202.00
30.30
232.30
232.30

Description
MATERIAL
Stainless steel Male thread Tee for
22.22 mm outer dia X 20 mm nominal dia
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
205.00
Amount
205.00
205.00
2.05
207.05
31.06
238.11
238.10

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1355
Unit
Quantity
each
1.00
Rate
273.00
Amount
273.00
273.00
2.73
275.73
41.36
317.09
317.10
18.94.5
Code
8849
18.94.6
Code
8850
18.94.7
Code
8851

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
273.00
Amount
273.00
273.00
2.73
275.73
41.36
317.09
317.10

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
273.00
Amount
273.00
273.00
2.73
275.73
41.36
317.09
317.10

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1356
Unit
Quantity
each
1.00
Rate
437.00
Amount
437.00
437.00
4.37
441.37
66.21
507.58
507.60
18.94.8
Code
8852
18.94.9
Code
8853
18.94.10
Code
8854

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
437.00
Amount
437.00
437.00
4.37
441.37
66.21
507.58
507.60

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
437.00
Amount
437.00
437.00
4.37
441.37
66.21
507.58
507.60

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1357
Unit
Quantity
each
1.00
Rate
437.00
Amount
437.00
437.00
4.37
441.37
66.21
507.58
507.60
18.94.11
Code
8855
18.94.12
Code
8856
18.94.13
Code
8857

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1358
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30
18.94.14
Code
8858
18.94.15
Code
8859
18.94.16
Code
8860

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1359
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25
18.94.17
Code
8861
18.94.18
Code
8862
18.94.19
Code
8863

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1360
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25
18.94.20
Code
8864
18.94.21
Code
8865
18.95

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25
Female Thread Tee
18.95.1
For 15.88 mm outer dia x15 mm nominal dia threaded
Code
Description
8866

MATERIAL
Stainless steel Female thread Tee for
threaded
1361
Unit
Quantity
each
1.00
Rate
179.00
Amount
179.00
Code
Description
Unit
Quantity
Rate
TOTAL
TOTAL
Cost of 1 no.
Say
18.95.2
Code
8867
18.95.3
Code
8868
Amount
179.00
1.79
180.79
27.12
207.91
207.90

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
200.00
Amount
200.00
200.00
2.00
202.00
30.30
232.30
232.30

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1362
Unit
Quantity
each
1.00
Rate
200.00
Amount
200.00
200.00
2.00
202.00
30.30
232.30
232.30
18.95.4
Code
8869
18.95.5
Code
8870
18.95.6
Code
8871

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
273.00
Amount
273.00
273.00
2.73
275.73
41.36
317.09
317.10

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
273.00
Amount
273.00
273.00
2.73
275.73
41.36
317.09
317.10

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1363
Unit
Quantity
each
1.00
Rate
273.00
Amount
273.00
273.00
2.73
275.73
41.36
317.09
317.10
18.95.7
Code
8872
18.95.8
Code
8873
18.95.9
Code
8874

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
437.00
Amount
437.00
437.00
4.37
441.37
66.21
507.58
507.60

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
437.00
Amount
437.00
437.00
4.37
441.37
66.21
507.58
507.60

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1364
Unit
Quantity
each
1.00
Rate
437.00
Amount
437.00
437.00
4.37
441.37
66.21
507.58
507.60
18.95.10
Code
8875
18.95.11
Code
8876
18.95.12
Code
8877

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
437.00
Amount
437.00
437.00
4.37
441.37
66.21
507.58
507.60

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1365
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30
18.95.13
Code
8878
18.95.14
Code
8879
18.95.15
Code
8880

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1366
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30
18.95.16
Code
8881
18.95.17
Code
8882
18.95.18
Code
8883

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1367
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25
18.95.19
Code
8884
18.95.20
Code
8885
18.95.21
Code
8886

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1368
Unit
Quantity
each
1.00
Rate
887.00
Amount
887.00
887.00
8.87
895.87
134.38
1030.25
1030.25
18.96
Female Thread Connector/ Adapter
18.96.1
Code
8887
18.96.2
Code
8888
18.96.3
Code
8889

Description
MATERIAL
Stainless steel Female threaded
Connector/Adapter for 15.88 mm outer dia
X 15 mm nominal dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
190.00
Amount
190.00
190.00
1.90
191.90
28.79
220.69
220.70
For 22.22 mm outer dia x 15 mmnominal dia threaded

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
230.00
Amount
230.00
230.00
2.30
232.30
34.85
267.15
267.15

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
1369
Unit
Quantity
each
1.00
Rate
237.00
Amount
237.00
237.00
2.37
239.37
35.91
275.28
275.30
18.96.4
Code
8890
18.96.5
Code
8891
18.96.6
Code
8892

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
277.00
Amount
277.00
277.00
2.77
279.77
41.97
321.74
321.75

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
286.00
Amount
286.00
286.00
2.86
288.86
43.33
332.19
332.20

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
1370
Unit
Quantity
each
1.00
Rate
337.00
Amount
337.00
337.00
3.37
340.37
51.06
391.43
391.45
18.96.7
Code
8893
18.96.8
Code
8894
18.96.9
Code
8895

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
409.00
Amount
409.00
409.00
4.09
413.09
61.96
475.05
475.05

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
538.00
Amount
538.00
538.00
5.38
543.38
81.51
624.89
624.90

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
1371
Unit
Quantity
each
1.00
Rate
576.00
Amount
576.00
576.00
5.76
581.76
87.26
669.02
669.00
18.96.10
Code
8896
18.96.11
Code
8897
18.96.12
Code
8898

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
681.00
Amount
681.00
681.00
6.81
687.81
103.17
790.98
791.00

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
838.00
Amount
838.00
838.00
8.38
846.38
126.96
973.34
973.35

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
1372
Unit
Quantity
each
1.00
Rate
965.00
Amount
965.00
965.00
9.65
974.65
146.20
1120.85
1120.85
18.97
Male Thread Connector/ Adapter
18.97.1
Code
8899
18.97.2
Code
8900
18.97.3
Code
8901

Description
MATERIAL
Stainless steel Male threaded Connector/
Adapter for 15.88 mm outer dia X 15 mm
nominal dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
193.00
Amount
193.00
193.00
1.93
194.93
29.24
224.17
224.15

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
227.00
Amount
227.00
227.00
2.27
229.27
34.39
263.66
263.65

Description
MATERIAL
Adapter for 22.22 mm outer dia X 20mm
TOTAL
TOTAL
Cost of 1 no.
Say
1373
Unit
Quantity
each
1.00
Rate
248.00
Amount
248.00
248.00
2.48
250.48
37.57
288.05
288.05
18.97.4
Code
8902
18.97.5
Code
8903
18.97.6
Code
8904

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
313.00
Amount
313.00
313.00
3.13
316.13
47.42
363.55
363.55

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
320.00
Amount
320.00
320.00
3.20
323.20
48.48
371.68
371.70

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
1374
Unit
Quantity
each
1.00
Rate
461.00
Amount
461.00
461.00
4.61
465.61
69.84
535.45
535.45
18.97.7
Code
8905
18.97.8
Code
8906
18.97.9
Code
8907

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
565.00
Amount
565.00
565.00
5.65
570.65
85.60
656.25
656.25

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
649.00
Amount
649.00
649.00
6.49
655.49
98.32
753.81
753.80

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
1375
Unit
Quantity
each
1.00
Rate
726.00
Amount
726.00
726.00
7.26
733.26
109.99
843.25
843.25
18.97.10
Code
8908
18.97.11
Code
8909
18.98

Description
MATERIAL
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
840.00
Amount
840.00
840.00
8.40
848.40
127.26
975.66
975.65

Description
MATERIAL
Adapter for 48.60 mm outer dia X 50
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
1138.00
Amount
1138.00
1138.00
11.38
1149.38
172.41
1321.79
1321.80
Valve Connector
18.98.1
Code
8910

Description
MATERIAL
Stainless steel Valve Connector for
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1376
Unit
Quantity
each
1.00
Rate
234.00
Amount
234.00
234.00
2.34
236.34
35.45
271.79
271.80
18.98.2
Code
8911
18.98.3
Code
8912
18.98.4
Code
8913

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
276.00
Amount
276.00
276.00
2.76
278.76
41.81
320.57
320.55

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
295.00
Amount
295.00
295.00
2.95
297.95
44.69
342.64
342.65

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1377
Unit
Quantity
each
1.00
Rate
424.00
Amount
424.00
424.00
4.24
428.24
64.24
492.48
492.50
18.98.5
Code
8914
18.98.6
Code
8915
18.98.7
Code
8916

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
629.00
Amount
629.00
629.00
6.29
635.29
95.29
730.58
730.60

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
875.00
Amount
875.00
875.00
8.75
883.75
132.56
1016.31
1016.30

Description
MATERIAL
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1378
Unit
Quantity
each
1.00
Rate
1176.00
Amount
1176.00
1176.00
11.76
1187.76
178.16
1365.92
1365.90
18.99
Female Threaded Elbow 90
18.99.1
Code
8917
18.99.2
Code
8918
18.99.3
Code
8919

Description
MATERIAL
SS Female Threaded Elbow 90O for
threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
150.00
Amount
150.00
150.00
1.50
151.50
22.73
174.23
174.25

Description
MATERIAL
Stainless steel Female Threaded Elbow 90O
for 22.22 mm outer dia X 15 mm
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
191.00
Amount
191.00
191.00
1.91
192.91
28.94
221.85
221.85

Description
MATERIAL
for 22.22 mm outer dia X 20 mm nominal
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1379
Unit
Quantity
each
1.00
Rate
191.00
Amount
191.00
191.00
1.91
192.91
28.94
221.85
221.85
18.99.4
Code
8920
18.99.5
Code
8921
18.99.6
Code
8922

Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost for 1 no.
Say
Unit
Quantity
each
1.00
Rate
205.00
Amount
205.00
205.00
2.05
207.05
31.06
238.11
238.10

Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost for 1 no.
Say
Unit
Quantity
each
1.00
Rate
287.00
Amount
287.00
287.00
2.87
289.87
43.48
333.35
333.35

Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1380
Unit
Quantity
each
1.00
Rate
478.00
Amount
478.00
478.00
4.78
482.78
72.42
555.20
555.20
18.99.7
Code
8923
18.99.8
Code
8924
18.99.9
Code
8925

Description
MATERIAL
for 42.70 mm outer dia X40 mm
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
478.00
Amount
478.00
478.00
4.78
482.78
72.42
555.20
555.20

Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30

Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1381
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30
18.100
Male Threaded Elbow 90O
18.100.1
Code
8926
18.100.2
Code
8927
18.100.3
Code
8928

Description
MATERIAL
Stainless steel Male Threaded Elbow 90O
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
191.00
Amount
191.00
191.00
1.91
192.91
28.94
221.85
221.85

Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
205.00
Amount
205.00
205.00
2.05
207.05
31.06
238.11
238.10

Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1382
Unit
Quantity
each
1.00
Rate
205.00
Amount
205.00
205.00
2.05
207.05
31.06
238.11
238.10
18.100.4
Code
8929
18.100.5
Code
8930
18.100.6
Code
8931

Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
205.00
Amount
205.00
205.00
2.05
207.05
31.06
238.11
238.10

Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
287.00
Amount
287.00
287.00
2.87
289.87
43.48
333.35
333.35

Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1383
Unit
Quantity
each
1.00
Rate
287.00
Amount
287.00
287.00
2.87
289.87
43.48
333.35
333.35
18.100.7
Code
8932
18.100.8
Code
8933
18.100.9
Code
8934

Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
478.00
Amount
478.00
478.00
4.78
482.78
72.42
555.20
555.20

Description
MATERIAL
for 42.70 mm outer dia X40 mm nominal
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
478.00
Amount
478.00
478.00
4.78
482.78
72.42
555.20
555.20

Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
1384
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30
18.100.10 For 48.60 mm outer dia x 50 mm nominal dia threaded

Code
8935
18.101
Description
MATERIAL
dia threaded
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Rate
683.00
Amount
683.00
683.00
6.83
689.83
103.47
793.30
793.30
Cap
18.101.1
Code
8936
18.101.2
Code
8937

Description
MATERIAL
Stainless steel Cap for 15.88 mm outer
dia pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Rate
45.00
Amount
45.00
45.00
0.45
45.45
6.82
52.27
52.25

Description
MATERIAL
dia pipe
TOTAL
TOTAL
Cost of 1 no.
Say
1385
Rate
64.00
Amount
64.00
64.00
0.64
64.64
9.70
74.34
74.35
18.101.3
Code
8938
18.101.4
Code
8939
18.101.5
Code
8940
18.101.6
Code
8941

Description
MATERIAL
dia pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Rate
84.00
Amount
84.00
84.00
0.84
84.84
12.73
97.57
97.55

Description
MATERIAL
dia pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
173.00
Amount
173.00
173.00
1.73
174.73
26.21
200.94
200.95

Description
MATERIAL
dia pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
253.00
Amount
253.00
253.00
2.53
255.53
38.33
293.86
293.85

Description
MATERIAL
dia pipe
TOTAL
TOTAL
Cost of 1 no.
Say
1386
Rate
330.00
Amount
330.00
330.00
3.30
333.30
50.00
383.30
383.30
18.102
Pipe Bridge
18.102.1
Code
8942
18.102.2
Code
8943
18.102.3
Code
8944

Description
MATERIAL
Stainless steel Pipe Bridge for 15.88 mm
outer dia pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Rate
214.00
Amount
214.00
214.00
2.14
216.14
32.42
248.56
248.55

Description
MATERIAL
outer dia pipe
TOTAL
TOTAL
Cost of 1 no.
Say
Rate
271.00
Amount
271.00
271.00
2.71
273.71
41.06
314.77
314.75

Description
MATERIAL
outer dia pipe
TOTAL
TOTAL
Cost for 1 no.
Say
1387
Rate
407.00
Amount
407.00
407.00
4.07
411.07
61.66
472.73
472.75
SUB HEAD : 19.0
DRAINAGE
1389
19.1
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff
mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand)
including testing of joints etc. complete :
19.1.1
100 mm diameter
Code
1854
2224
0367
2209
0983
2261
1881
0123
0124
0114
0101
19.1.2
Code
1855
2225
0367
2209
0983
2261
1881
Description
MATERIAL
Stoneware pipes grade A (60 cm long)
100 mm dia
Added 10% allowance for breakage
Carriage of S.W. pipes 100 mm dia
Cement for 50 joints = 0.019 tonne
Carriage of Cement
Fine sand (zone IV)
Spun yarn
or plain gaskin @ 0.09 kg per joint
= 0.09x50 = 4.50 kg
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 30 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
each
55.00
50.00
2750.00
100 metre
0.33
138.36
45.66
tonne
tonne
cum
0.019
0.019
0.01
5700.00
92.24
760.00
108.30
1.75
7.60
cum
kilogram
0.01
4.50
103.77
50.00
1.04
225.00
day
day
day
day
1.00
1.00
3.00
1.00
487.00
448.00
368.00
407.00
487.00
448.00
1104.00
407.00
5585.35
55.85
5641.20
846.18
6487.38
216.24
216.25
Unit
Quantity
each
55.00
80.00
4400.00
100 metre
0.33
276.72
91.32
tonne
tonne
cum
0.036
0.036
0.019
5700.00
92.24
760.00
205.20
3.32
14.44
cum
kilogram
0.019
9.00
103.77
50.00
1.97
450.00
150 mm diameter
Description
MATERIAL
150 mm dia
Cement of 50 joints = 0.036 tonne
Carriage of Cement
Fine sand (zone IV)
Spun yarn
= 0.18x50 = 9 kg
SUB HEAD : 19- DRAINAGE
1391
Rate
Amount
Code
0123
0124
0114
0101
19.1.3
Code
1856
2226
0367
2209
0983
2261
1881
0123
0124
0114
0101
19.1.4
Code
1858
Description
Unit
Quantity
day
day
day
day
1.50
1.50
4.00
1.00
Unit
Quantity
each
55.00
110.00
6050.00
100 metre
0.33
461.19
152.19
tonne
tonne
cum
0.053
0.053
0.028
5700.00
92.24
760.00
302.10
4.89
21.28
cum
kilogram
0.028
12.00
103.77
50.00
2.91
600.00
day
day
day
day
1.75
1.75
4.50
1.25
487.00
448.00
368.00
407.00
852.25
784.00
1656.00
508.75
10934.37
109.34
11043.71
1656.56
12700.27
423.34
423.35
Description
Unit
Quantity

MATERIAL
250 mm dia
each
55.00
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 30 metre
Cost of 1 metre
Say
Rate
487.00
448.00
368.00
407.00
Amount
730.50
672.00
1472.00
407.00
8447.75
84.48
8532.23
1279.83
9812.06
327.06
327.05
200 mm diameter
Description
MATERIAL
200 mm dia
Added 10% allowance for breakage in
items (I) & (ii)
Carriage of Cement
Fine sand (zone IV)
Spun yarn
= 0.24x50 =12.00 kg
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 30 metre
Cost of 1 metre
Say
Rate
Amount
250 mm diameter
1392
Rate
210.00
Amount
11550.00
Code
2228
0367
2209
0983
2261
1881
0123
0124
0114
0101
19.1.5
Code
1859
2229
0367
2209
0983
2261
1881
0123
0124
0114
Description
Carriage of Cement
Fine sand (zone IV)
Spun yarn
= 0.30x50= 15.00 kg
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 30 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
100 metre
0.33
790.62
260.90
tonne
tonne
cum
0.094
0.094
0.05
5700.00
92.24
760.00
535.80
8.67
38.00
cum
kilogram
0.05
15.00
103.77
50.00
5.19
750.00
day
day
day
day
2.25
2.25
5.50
1.50
487.00
448.00
368.00
407.00
1095.75
1008.00
2024.00
610.50
17886.81
178.87
18065.68
2709.85
20775.53
692.51
692.50
Unit
Quantity
each
55.00
240.00
13200.00
100 metre
0.33
988.27
326.13
tonne
tonne
cum
0.125
0.125
0.075
5700.00
92.24
760.00
712.50
11.53
57.00
cum
kilogram
0.075
18.00
103.77
50.00
7.78
900.00
day
day
day
2.50
2.50
6.00
487.00
448.00
368.00
1217.50
1120.00
2208.00
300 mm diameter
Description
MATERIAL
300 mm dia
Carriage of Cement
Fine sand (zone IV)
Spun yarn
or plain gaskin @ 0.36 kg / joint
= 0.36x50 =18.00 kg
LABOUR
Beldar
1393
Rate
Amount
Code
Description
Unit
Quantity
0101
Bhisti
TOTAL
TOTAL
Cost of 30 metre
Cost of 1 metre
Say
day
1.50
Rate
407.00
Amount
610.50
20370.94
203.71
20574.65
3086.20
23660.85
788.69
788.70
19.2
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10

graded stone aggregate 40 mm nominal size) all-round S.W. pipes including
bed concrete as per standard design :
19.2.1
100 mm diameter S.W. pipe
Code
4.1.10
19.2.2
Code
Description
Area = W x W/2 + x (3.14 x W / 4)
- (3.14 x D / 4)
= W x (0.5 + 3.14 / 8) - (3.14 x D / 4)
Where W = D + X
D = 100 + 12 + 12 = 124 mm or 12.4 cm
X = 300 mm as trench depth is less than
1200 mm
W = 12.4 + 30 = 42.4
Area=
= 42.4 x ( 0.5 + 3.14/ 8) - (3.14 x 12.4/4)
= 1484 sqcm = 0.1484 sqm Say 0.148 sqm
For 10 m length qty. of concrete reqd.
= 1.48 cum
SH : Concrete Work
Cost of 10 metres
Cost of metre
Say
Unit
Quantity
cum
1.48
Unit
Quantity
Rate
Amount
4209.05 6229.39(A)
6229.39
622.93
622.95

Description
Area = W x W/2 + x (3.14 x W / 4)
- (3.14 x D / 4)
= W x (0.5 + 3.14 / 8) - (3.14 x D / 4)
Where W = D + X
D = 150 + 16 + 16 = 182 mm or 18.2 cm
1200 mm
W = 18.2 + 30 = 48.2
Area
= 48.2 x ( 0.5 + 3.14/ 8) - (3.14 x 18.2 /4)
= 1807.66 sqcm = 0.1808 sqm
Say 0.181 sqm
1394
Rate
Amount
Code
4.1.10
19.2.3
Code
4.1.10
19.2.4
Code
4.1.10
Description
Unit
Quantity

= 1.81 cum
SH : Concrete Work
Cost of 10 metres
Cost of metre
Say
cum
1.81
Unit
Quantity
cum
2.11
Unit
Quantity
cum
2.44
Rate
Amount
4209.05 7618.38(A)
7618.38
761.83
761.85

Description
Area = W x W/2 + x (3.14 x W / 4)
- (3.14 x D / 4)
= W x (0.5 + 3.14 / 8) - (3.14 x D / 4)
Where W = D + X
D = 200 + 17 + 17 = 234 mm or 23.4 cm
X = 300 mm as trench depth is less
than 1200 mm
W = 23.4 + 30 = 53.4
Area
= 53.4 x ( 0.5 + 3.14 / 8) - (3.14 x 23.4/4)
= 2115 sqcm = 0.2115 sqm Say 0.211 sqm
= 2.11 cum
SH : Concrete Work
Cost of 10 metres
Cost of metre
Say
Rate
Amount
4209.05 8881.10(A)
8881.10
888.11
888.10

Description
Area = W x W/2 + x (3.14 x W / 4)
- (3.14 x D / 4)
= W x (0.5 + 3.14 / 8) - (3.14 x D / 4)
Where W = D + X
D = 250 + 20 + 20 = 290 mm or 29.0 cm
1200 mm
W = 29 + 30 = 59
Area
= 59 x ( 0.5 + 3.14/ 8) - (3.14 x 29/4)
= 2447 sqcm = 0.2447 sqm. Say 0.244 sqm
= 2.44 cum
SH : Concrete Work
Cost of 10 metres
Cost of metre
Say
1395
Rate
Amount
4209.05 10270.08(A)
10270.08
1027.00
1027.00
19.3
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10

graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes
including bed concrete as per standard design :
19.3.1
Code
4.1.10
19.3.2
Code
Description
Area = WxD1 + 2xxR Cot QxR [R/2(3.14/2-Q)] - (3.14/2)R
= WD1 + R(Cot Q) - R(3.14/2 - Q) (3.14/2)R
= WD1+R(cot Q-3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 100 + 12 +
12 = 124 mm
W = 124 + 300 = 424 mm
D1 = Depth = 100 + ( x 124) = 162 mm
R = 62 mm
Sin Q = (2x62)/424 = 0.292 therefor Q
= 170'
Hence Tan Q = 0.3057
Area = 424 x 162 + (62) (Cot Q - 3.14 + Q)
= [68688 + 3844 (1/0.3057 - 180 + 170')]
sqmm
= [68688 + 3844 (3.27 - 1630' x 3.14/180)]
sqmm
= (68688 + 3844 x 0.43) sqmm
= (68688 + 1652.92) sqmm
= 70340.92 sqmm
Say 70341 sqmm or 0.070341 sqm
= 0.07034x10 = 0.7034 cum
SH : Concrete Work
Cost of 10 metres
Cost per metre
Say
Unit
Quantity
cum
0.7034
Unit
Quantity
Rate
Amount
4209.05 2960.65(A)
2960.65
296.06
296.05

Description
Details of cost for 10 metre length pipe
Area = WxD1 + 2xxR Cot QxR
- [R/2(3.14/2-Q)] - (3.14/2)R
= WD1 + R(Cot Q) - R(3.14/2 - Q)
- (3.14/2)R
= WD1 + R(Cot Q - 3.14 + Q)
W = D + X ; X = 300 mm, D = 150 + 16
+ 16 = 182 mm
W = 182 + 300 = 482 mm
D1 = Depth = 150 + ( x 182) = 241 mm
R = 91 mm
Sin Q = (2x91)/482 = 0.3776 therefor Q
= 2212'
1396
Rate
Amount
Code
4.1.10
19.3.3
Code
4.1.10
Description
Area = 482 x 241 + (91) (Cot Q - 3.14 + Q)
= [116162 + 8281 (1/0.4081 - 180
+ 2212')] sqmm
= [116162 + 8281 (2.45 - 15748' x
3.14/180)] sqmm
= [116162 + 8281 x (2.45-2.75)] sqmm
= [116162 + 8281 x (-0.30)] sqmm
= (116162 - 2484.3) sqmm = 113677.7 sqmm
Say 113677.7 sqmm or 0.1136777 sqm
= 0.1136777x10 = 1.136777 cum
Say 1.14 cum
SH : Concrete Work
Cost of 10 metres
Cost per metre
Say
Unit
Quantity
cum
1.14
Unit
Quantity
cum
1.34
Rate
Amount
4209.05 4798.32(A)
4798.32
479.83
479.85

Description
Area = WxD1 + 2xxR Cot QxR [R/2(3.14/2-Q)] - (3.14/2)R
= WD1 + R(Cot Q) - R(3.14/2 - Q)
- (3.14/2)R2
= WD1 + R(Cot Q - 3.14 + Q)
W = D + X ; X = 300 mm, D = 200
+ 17 + 17 = 234 mm
W = 234 + 300 = 534 mm
D1 = Depth = 150 + ( x 234) = 267 mm
R = 117 mm
Sin Q = (2x117)/534 = 0.4382 therefor Q
= 260'
Area = 534 x 267 + (117) (Cot Q - 3.14 + Q)
= [142578 + 13689 (1/0.4877 - 180
+ 260')] sqmm
= [142578 + 13689 (2.05 - 1540' x
3.14/180)] sqmm
= [142578 + 13689 x (2.05-2.69)] sqmm
= [142578 + 13689 x (-0.64)] sqmm
= (142578 - 8760.96) sqmm
= 133817.04 sqmm
= 0.134x10 = 1.34 cum
SH : Concrete Work
Cost of 10 metres
Cost per metre
Say
1397
Rate
Amount
4209.05 5640.13(A)
5640.13
564.01
564.00
19.3.4
Code
4.1.10
19.3.5
Code

Description
- [R/2(3.14/2-Q)] - (3.14/2)R
= WD1 + R(Cot Q) - R(3.14/2 - Q)
- (3.14/2)R2
= WD1 + R(Cot Q - 3.14 + Q)
W = D + X ; X = 300 mm, D = 250 + 20
+ 20 = 290 mm
W = 290 + 300 = 590 mm
D1 = Depth = 150 + ( x 290) = 295 mm
R = 145 mm
Sin Q = (2x145)/590 = 0.49154
therefor Q = 2926'
Area = 590 x 295 + (145) (Cot Q - 3.14 + Q)
= [174050 + 21025 (1/0.5635 - 180
+ 2926')] sqmm
= [174050 + 21025 (1.77 - 15034' x
3.14/180)] sqmm
= [174050 + 21025 x (1.77-2.63)] sqmm
= [174050 + 21025 x (-0.86)] sqmm
= (174050 - 18081.5) sqmm
= 155968.5 sqmm
= 0.156x10 = 1.56 cum
SH : Concrete Work
Cost of 10 metres
Cost per metre
Say
Unit
Quantity
cum
1.56
Unit
Quantity
Rate
Amount
4209.05 6566.12(A)
6566.12
656.61
656.60

Description
- [R/2(3.14/2-Q)] - (3.14/2)R
= WD1 + R(Cot Q) - R(3.14/2 - Q)
- (3.14/2)R2
= WD1 + R(Cot Q - 3.14 + Q)
W = D + X ; X = 300 mm, D = 300 + 25
+ 25 = 350 mm
W = 350 + 300 = 650 mm
D1 = Depth = 150 + ( x 350) = 325 mm
R = 175 mm
Sin Q = (2x175)/650 = 0.5385 therefor Q
= 3234'
1398
Rate
Amount
Code
4.1.10
Description
Area = 650 x 325 + (175) (Cot Q - 3.14 + Q)
= [211250 + 30625 (1/0.6387 - 180
+ 3234')] sqmm
= [211250 + 30625 (1.566 - 14726' x
3.14/180)] sqmm
= [211250 + 30625 x (1.566-2.571)] sqmm
= [211250 + 30625 x (-1.005)] sqmm
= [211250 - 30778.13) sqmm
= 180471.87 sqmm
Say 0.180 sqm
= 0.180x10 = 1.80 cum
SH : Concrete Work
Cost of 10 metres
Cost per metre
Say
Unit
Quantity
cum
1.80
Rate
Amount
4209.05 7576.29(A)
7576.29
757.62
757.60
19.4
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with
C.I. grating brick masonry chamber with water tight C.I. cover with frame of
300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and
frame to be not less than 2.70 kg as per standard design:
19.4.1
100x100 mm size P type
19.4.1.1
Code
1900
1364
1352
9977
4.1.11
Description
Details of cost of one gully tarp
S.W. gully trap P type 100x100 mm
C.I. grating 100x100 mm
C.I. cover and frame 300x300 mm inside
Cement concrete 1:5:10 ( 1 cement : 5 fine
sand : 10 graded stone aggregate 40 mm
nominal size)
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap
0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum
Deduct:
0.3453x[0.09+0.01+(0.09x0.01)1/2]
= 0.015 cum
3.14/4x(0.124)x0.47 = 0.006 cum
Total= 0.021 cum
Net quantity 0.107 cum (-) 0.021 cum
= 0.086 cum say 0.09 cum
SH : Concrete Work
Brick work with 7.5 class designation brick
in cement mortar 1:4 (1 cement : 4 coarse
sand)
1.66x0.115x0.675 m = 0.129 cum
say 0.13 cum
1399
Unit
Quantity
Rate
Amount
each
each
each
L.S.
1.00
1.00
1.00
4.50
90.00
15.00
300.00
1.73
90.00
15.00
300.00
7.79
cum
0.09
3959.70
356.37(A)
Code
Description
Unit
Quantity
6.1.1

Cement concrete 1:2:4 ( 1 cement : 2
mm nominal size)
1.66x0.115x0.04 m = 0.008 cum
Work
12 mm cement plaster 1:3 (1 cement : 3
coarse sand) finished with floating coat of
neat cement :
[1/2x0.358x(1.20+0.40)] = 0.286 sqm
say 0.29 sqm
TOTAL
i.e. on (1535.74 - 1122.95) = 412.79
TOTAL
- 1122.95) = 416.92
Cost of each
Say
cum
0.13
4970.30
646.14(A)
cum
0.008
6547.70
52.38(A)
sqm
0.29
234.70
68.06(A)
1535.74
4.2.3
13.9.1
19.4.1.2
Code
1900
1364
1352
9977
4.1.11
6.36.1
Rate
Amount
4.13
1539.87
62.54
1602.41
1602.40
With Sewer bricks conforming to IS : 4885

Description
Detaila of cost of one gully tarp
nominal size)
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum
Deduct:
0.3453x[0.09+0.01+(0.09x0.01)1/2]
= 0.015 cum
3.14/4x(0.124)x0.47 = 0.006 cum
Total = 0.021 cum
= 0.086 cum say 0.09 cum
Work
Brick work with 75 class designation brick
in cement mortar 1:4 (1 cement :4 coarse
sand)
1.66x0.115x0.675 m = 0.129 cum say
0.13 cum
Rate as per item No 6.36.1 of SH : Brick
Work
1400
Unit
Quantity
Rate
Amount
each
each
each
L.S.
1.00
1.00
1.00
4.50
90.00
15.00
300.00
1.73
90.00
15.00
300.00
7.79
cum
0.09
3959.70
356.37(A)
cum
0.13
5102.00
663.26(A)
Code
4.2.3
13.9.1
Description
mm nominal size)
1.66x0.115x0.04 m = 0.008 cum
Work
neat cement :
[1/2x0.358x(1.20+0.40)] = 0.286 sqm say
0.29 sqm
TOTAL
i.e. on (1552.86 - 1140.07) = 412.79
TOTAL
- 1140.07) = 416.92
Cost of each
Say
Unit
Quantity
Rate
Amount
cum
0.008
6547.70
52.38(A)
sqm
0.29
234.70
68.06(A)
1552.86
4.13
1556.99
62.54
1619.53
1619.55
19.4.2
150 x 100 mm size P type
19.4.2.1
Code
1902
1366
1352
9977
4.1.11
Description
nominal size)
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
Total =0.107 cum
Deduct:
0.3223x[0.09+0.023+(0.09x0.023)1/2]
= 0.017 cum
3.14/4x(0.124)x0.485 = 0.006 cum
Total = 0.023 cum
= 0.084 cum say 0.08 cum
Work
in cement mortar 1:4 (1 cement :4 coarse
sand)
1.66x0.115x0.675 m = 0.129 cum say
0.13 cum
1401
Unit
Quantity
Rate
Amount
each
each
each
L.S.
1.00
1.00
1.00
4.50
130.00
25.00
300.00
1.73
130.00
25.00
300.00
7.79
cum
0.08
3959.70
316.78(A)
Code
Description
Unit
Quantity
6.1.1

mm nominal size)
1.66x0.115x0.04 m = 0.008 cum
Work
neat cement :
[1/2x0.337x(1.20+0.60)] = 0.303 sqm
say 0.30 sqm
TOTAL
i.e. on (1548.50 - 1085.71) = 462.79
TOTAL
= 467.42
Cost of each
Say
cum
0.13
4970.30
646.14(A)
cum
0.008
6547.70
52.38(A)
sqm
0.30
234.70
70.41(A)
1548.50
4.2.3
13.9.1
19.4.2.2
Code
1902
1366
1352
9977
4.1.11
Rate
Amount
4.63
1553.13
70.11
1623.24
1623.25
With sewer bricks conforming to IS : 4885

Description
nominal size)
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
Total =0.107 cum
Deduct:
0.3223x[0.09+0.023+(0.09x0.023)1/2]
= 0.017 cum
3.14/4x(0.124)x0.485 = 0.006 cum
Total= 0.023 cum
= 0.084 cum say 0.08 cum
Work
Brick work with sewer bricks conforming to
IS:4885 in cement mortar 1:4 (1 cement :4
coarse sand)
1.66x0.115x0.675 m = 0.129 cum say
0.13 cum
1402
Unit
Quantity
Rate
Amount
each
each
each
L.S.
1.00
1.00
1.00
4.50
130.00
25.00
300.00
1.73
130.00
25.00
300.00
7.79
cum
0.08
3959.70
316.78(A)
Code
Description
6.36.1

Work
mm nominal size)
1.66x0.115x0.04 m = 0.008 cum
Work
neat cement :
[1/2x0.337x(1.20+0.60)] = 0.303 sqm
say 0.30 sqm
TOTAL
i.e. on (1565.62 - 1102.83) = 462.79
TOTAL
- 1102.83) = 467.42
Cost of each
Say
4.2.3
13.9.1
Unit
Quantity
Rate
Amount
cum
0.13
5102.00
663.26(A)
cum
0.008
6547.70
52.38(A)
sqm
0.30
234.70
70.41(A)
1565.62
4.63
1570.25
70.11
1640.36
1640.35
19.4.3
180x150 mm size P type
19.4.3.1
Code
1904
1367
1352
9977
4.1.11
Description
nominal size)
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum
Deduct:
0.1553x[0.09+0.032+(0.09x0.032)1/2]
= 0.008 cum
3.14/4x(0.182)x0.70 =0.018 cum
Total= 0.026 cum
= 0.081 cum say 0.08 cum
Work
in cement mortar 1:4 (1 cement : 4 coarse
sand)
1403
Unit
Quantity
Rate
Amount
each
each
each
L.S.
1.00
1.00
1.00
4.50
225.00
30.00
300.00
1.73
225.00
30.00
300.00
7.79
cum
0.08
3959.70
316.78(A)
Code
6.1.1
4.2.3
13.9.1
19.4.3.2
Code
1904
1367
1352
9977
4.1.11
Description
1.66x0.115x0.675 m = 0.129 cum
say 0.13 cum
mm nominal size)
1.66x0.115x0.04 m =0.008 cum
Work
neat cement :
[1/2x0.166x(1.20+0.72)] = 0.159 sqm
say 0.16 sqm
TOTAL
i.e. on (1615.64 - 1052.85) = 562.79
TOTAL
- 1052.85) = 568.42
Cost of each
Say
Unit
Quantity
Rate
Amount
cum
0.13
4970.30
646.14(A)
cum
0.008
6547.70
52.38(A)
sqm
0.16
234.70
37.55(A)
1615.64
5.63
1621.27
85.26
1706.53
1706.55

Description
nominal size)
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
Total=0.107 cum
Deduct:
0.1553x[0.09+0.032+(0.09x0.032)1/2]
= 0.008 cum
3.14/4x(0.182)x0.70 =0.018 cum
Total= 0.026 cum
= 0.081 cum say 0.08 cum
Work
IS:4885 in cement mortar 1:4 (1 cement :
4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum say
0.13 cum
1404
Unit
Quantity
Rate
Amount
each
each
each
L.S.
1.00
1.00
1.00
4.50
225.00
30.00
300.00
1.73
225.00
30.00
300.00
7.79
cum
0.08
3959.70
316.78(A)
Code
Description
6.36.1

Work
mm nominal size)
1.66x0.115x0.04 m =0.008 cum
Work
neat cement :
[1/2x0.166x(1.20+0.72)] = 0.159 sqm say
0.16 sqm
TOTAL
i.e. on (1632.76 - 1069.97) = 562.79
TOTAL
- 1069.97) = 568.42
Cost of each
Say
4.2.3
13.9.1
Unit
Quantity
Rate
Amount
cum
0.13
5102.00
663.26(A)
cum
0.008
6547.70
52.38(A)
sqm
0.16
234.70
37.55(A)
1632.76
5.63
1638.39
85.26
1723.65
1723.65
19.5
Dismantling of old S.W. pipes including breaking of joints and bed concrete
stacking of useful materials near the site within 50 m lead and disposal of
unserviceable materials into municipal dumps :
19.5.1
100 mm diameter
Code
0114
0115
19.5.2
Code
0114
Description
Unit
Quantity
day
day
0.49
0.36
Description
Unit
Quantity

LABOUR
Beldar
day
0.49

LABOUR
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
Rate
368.00
368.00
Amount
180.32
132.48
312.80
3.13
315.93
47.39
363.32
36.33
36.35
150 mm diameter
1405
Rate
368.00
Amount
180.32
Code
Description
Unit
Quantity
0115
Coolie
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
day
0.45
Unit
Quantity
day
day
0.49
0.51
Unit
Quantity
day
day
0.49
0.57
Unit
Quantity
day
day
0.49
0.63
19.5.3
Code
0114
0115
19.5.4
Code
0114
0115
19.5.5
Code
0114
0115
Rate
368.00
Amount
165.60
345.92
3.46
349.38
52.41
401.79
40.17
40.15
200 mm diameter
Description
LABOUR
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
Rate
368.00
368.00
Amount
180.32
187.68
368.00
3.68
371.68
55.75
427.43
42.74
42.75
250 mm diameter
Description
LABOUR
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
Rate
368.00
368.00
Amount
180.32
209.76
390.08
3.90
393.98
59.10
453.08
45.30
45.30
300 mm diameter
Description
LABOUR
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
1406
Rate
368.00
368.00
Amount
180.32
231.84
412.16
4.12
416.28
62.44
478.72
47.87
47.85
19.5.6
Code
0114
0115
19.5.7
Code
0114
0115
19.5.8
Code
0114
0115
19.6
350 mm diameter
Description
LABOUR
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
Unit
Quantity
day
day
0.60
0.69
Unit
Quantity
day
day
0.66
0.75
Unit
Quantity
day
day
0.66
0.81
Rate
368.00
368.00
Amount
220.80
253.92
474.72
4.75
479.47
71.92
551.39
55.13
55.15
400 mm diameter
Description
LABOUR
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
Rate
368.00
368.00
Amount
242.88
276.00
518.88
5.19
524.07
78.61
602.68
60.26
60.25
450 mm diameter
Description
LABOUR
Beldar
Coolie
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
Rate
368.00
368.00
Amount
242.88
298.08
540.96
5.41
546.37
81.96
628.33
62.83
62.85
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with
collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1
cement : 2 fine sand) including testing of joints etc. complete :
1407
19.6.1
Code
1700
1714
2275
0367
2209
0983
2261
0123
0124
0114
0101
19.6.2
Code
1701
1715
2281
0367
2209
0983
2261
0123
0124
0114
100 mm dia. R.C.C. pipe

Description
Unit

MATERIAL
R.C.C. pipes NP2 class 100 mm dia
(in 2 m. length = 5 Nos.)
R.C.C. collars NP2 class 100 mm dia
5 Nos.
Cement of 5 joints = 5x0.00065 = 0.00325
cum = 0.0048 t say 0.005 tonne
Carriage of Cement
Fine sand for 5 joint = 0.0013x5
= 0.0065 cum = 0.006 cum
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.00
200.00
2000.00
each
5.00
30.00
150.00
100 metre
0.10
226.82
22.68
tonne
tonne
0.005
0.005
5700.00
92.24
28.50
0.46
cum
0.006
760.00
4.56
cum
0.006
103.77
0.62
day
day
day
day
0.32
0.32
0.63
0.16
487.00
448.00
368.00
407.00
155.84
143.36
231.84
65.12
2802.98
28.03
2831.01
424.65
3255.66
325.56
325.55
Unit
Quantity

Description
MATERIAL
5 Nos.
Cement of 5 joints = 5x0.0008
= 0.004 cum = 0.006 tonne
Carriage of Cement
Fine sand for 5 joint = 0.0016x5
= 0.008 cum
Fine sand (zone IV)
LABOUR
Beldar
1408
Rate
Amount
metre
10.00
210.00
2100.00
each
5.00
35.00
175.00
100 metre
0.10
378.03
37.80
tonne
tonne
0.006
0.006
5700.00
92.24
34.20
0.55
cum
0.008
760.00
6.08
cum
0.008
103.77
0.83
day
day
day
0.39
0.39
0.78
487.00
448.00
368.00
189.93
174.72
287.04
Code
Description
Unit
Quantity
0101
Bhisti
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
day
0.16
Unit
Quantity
19.6.3
Code
1702
1716
2287
0367
2209
0983
2261
0123
0124
0114
0101
19.6.4
Code
1703
1717
2290
Rate
407.00
Amount
65.12
3071.27
30.71
3101.98
465.30
3567.28
356.72
356.70

Description
MATERIAL
5 Nos.
= 0.006 cum = 0.009tonne
Carriage of Cement
Fine sand for 5 joint = 0.0024x5 = 0.012 cum
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
Rate
Amount
metre
10.00
260.00
2600.00
each
5.00
50.00
250.00
100 metre
0.10
873.84
87.38
tonne
tonne
0.009
0.009
5700.00
92.24
51.30
0.83
cum
0.012
760.00
9.12
cum
0.012
103.77
1.25
day
day
day
day
0.54
0.54
1.50
0.23
487.00
448.00
368.00
407.00
262.98
241.92
552.00
93.61
4150.39
41.50
4191.89
628.78
4820.67
482.06
482.05
Unit
Quantity

Description
MATERIAL
(in 2.5 m. length = 4 Nos.)
4 Nos.
= 0.0074 cum = 0.011 tonne
1409
Rate
Amount
metre
10.00
300.00
3000.00
each
4.00
55.00
220.00
100 metre
0.10
1080.08
108.01
Code
Description
0367
2209

Carriage of Cement
Fine sand for 4 joint = 0.0037x4 = 0.0148
say 0.015cum
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
0983
2261
0123
0124
0114
0101
19.6.5
Code
1704
1718
2299
0367
2209
0983
2261
0123
0124
0114
0101
Unit
Quantity
Rate
Amount
tonne
tonne
0.011
0.011
5700.00
92.24
62.70
1.01
cum
0.015
760.00
11.40
cum
0.015
103.77
1.56
day
day
day
day
0.59
0.59
1.16
0.20
487.00
448.00
368.00
407.00
287.33
264.32
426.88
81.40
4464.61
44.65
4509.26
676.39
5185.65
518.56
518.55
Unit
Quantity

Description
MATERIAL
4 Nos.
Carriage of R.C.C. pipes 450 & 500 mm
dia
Cement of 4 joints = 4x0.0041 = 0.0164
cum = 0.024 tonne
Carriage of Cement
Fine sand for 4 joint = 0.0082x4 = 0.033 cum
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
1410
Rate
Amount
metre
10.00
400.00
4000.00
each
4.00
100.00
400.00
100 metre
0.10
2520.19
252.02
tonne
tonne
0.024
0.024
5700.00
92.24
136.80
2.21
cum
0.033
760.00
25.08
cum
0.033
103.77
3.42
day
day
day
day
0.75
0.75
1.50
0.33
487.00
448.00
368.00
407.00
365.25
336.00
552.00
134.31
6207.09
62.07
6269.16
940.37
7209.53
720.95
720.95
19.6.6
Code
1705
1719
2299
0367
2209
0983
2261
0123
0124
0114
0101
19.6.8
Code
1707
1721
2303
0367
2209
0983
2261

Description
Unit

MATERIAL
4 Nos.
Carriage of R.C.C. pipes 450 & 500 mm
dia
= 0.018 cum = 0.026 tonne
Carriage of Cement
Fine sand for 4 joints = 0.0089x4
= 0.0356 cum = 0.036 cum
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
10.00
580.00
5800.00
each
4.00
115.00
460.00
100 metre
0.10
2520.19
252.02
tonne
tonne
0.026
0.026
5700.00
92.24
148.20
2.40
cum
0.036
760.00
27.36
cum
0.036
103.77
3.74
day
day
day
day
0.81
0.81
1.62
0.33
487.00
448.00
368.00
407.00
394.47
362.88
596.16
134.31
8181.54
81.82
8263.36
1239.50
9502.86
950.28
950.30
Unit
Quantity

Description
MATERIAL
4 Nos.
Carriage of R.C.C. pipes 600, 700, 750 &
800 mm dia
= 0.0248 cum = 0.037 tonne
Carriage of Cement
= 0.0496 cum = 0.05 cum
Fine sand (zone IV)
1411
Rate
Amount
metre
10.00
1050.00
10500.00
each
4.00
150.00
600.00
100 metre
0.10
3780.28
378.03
tonne
tonne
0.037
0.037
5700.00
92.24
210.90
3.41
cum
0.05
760.00
38.00
cum
0.05
103.77
5.19
Code
0123
0124
0114
0101
19.6.9
Code
1709
1723
2303
0367
2209
0983
2261
0123
0124
0114
0101
19.6.10
Code
1710
Description
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
Unit
Quantity
day
day
day
day
1.03
1.03
2.06
0.42
Unit
Quantity
Rate
487.00
448.00
368.00
407.00
Amount
501.61
461.44
758.08
170.94
13627.60
136.28
13763.88
2064.58
15828.46
1582.84
1582.85

Description
MATERIAL
4 Nos.
800 mm dia
= 0.0288 cum = 0.042 tonne
Carriage of Cement
= 0.0572 cum = 0.057 cum
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10 metres
Cost of1 metre
Say
Rate
Amount
metre
10.00
1170.00
11700.00
each
4.00
200.00
800.00
100 metre
0.10
3780.28
378.03
tonne
tonne
0.042
0.042
5700.00
92.24
239.40
3.87
cum
0.057
760.00
43.32
cum
0.057
103.77
5.91
day
day
day
day
1.14
1.14
2.28
0.42
487.00
448.00
368.00
407.00
555.18
510.72
839.04
170.94
15246.41
152.46
15398.87
2309.83
17708.70
1770.87
1770.85
Unit
Quantity

Description
MATERIAL
metre
1412
10.00
Rate
1280.00
Amount
12800.00
Code
Description
1724

4 Nos.
= 0.0328 cum = 0.0488 t Say 0.049
Carriage of Cement
= 0.066 cum
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
2331
0367
2209
0983
2261
0123
0124
0114
0101
19.6.11
Code
1711
1725
2332
0367
2209
0983
2261
0123
0124
0114
Unit
Quantity
Rate
Amount
each
4.00
235.00
940.00
100 metre
0.10
5670.42
567.04
tonne
tonne
0.049
0.049
5700.00
92.24
279.30
4.52
cum
0.066
760.00
50.16
cum
0.066
103.77
6.85
day
day
day
day
1.25
1.25
3.00
0.50
487.00
448.00
368.00
407.00
608.75
560.00
1104.00
203.50
17124.12
171.24
17295.36
2594.30
19889.66
1988.96
1988.95
Unit
Quantity

Description
MATERIAL
4 Nos.
= 0.0368 cum = 0.055 tonne
Carriage of Cement
= 0.074 cum
Fine sand (zone IV)
LABOUR
Beldar
1413
Rate
Amount
metre
10.00
1590.00
15900.00
each
4.00
280.00
1120.00
100 metre
0.10
7560.57
756.06
tonne
tonne
0.055
0.055
5700.00
92.24
313.50
5.07
cum
0.074
760.00
56.24
cum
0.074
103.77
7.68
day
day
day
1.36
1.36
4.33
487.00
448.00
368.00
662.32
609.28
1593.44
Code
Description
Unit
Quantity
0101
Bhisti
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
day
0.50
Unit
Quantity
19.6.12
Code
1712
1726
2333
0367
2209
0983
2261
0123
0124
0114
0101
19.6.13
Code
1713
1727
Rate
407.00
Amount
203.50
21227.09
212.27
21439.36
3215.90
24655.26
2465.52
2465.50

Description
MATERIAL
4 Nos.
=0.0412 cum = 0.061 tonne
Carriage of Cement
= 0.0824 cum = 0.082 cum
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10 metress
Cost of 1 metre
Say
Rate
Amount
metre
10.00
1875.00
18750.00
each
4.00
300.00
1200.00
100 metre
0.10
7560.57
756.06
tonne
tonne
0.061
0.061
5700.00
92.24
347.70
5.63
cum
0.082
760.00
62.32
cum
0.082
103.77
8.51
day
day
day
day
1.47
1.47
6.30
0.60
487.00
448.00
368.00
407.00
715.89
658.56
2318.40
244.20
25067.27
250.67
25317.94
3797.69
29115.63
2911.56
2911.55
Unit
Quantity

Description
MATERIAL
4 Nos.
1414
Rate
Amount
metre
10.00
1677.00
16770.00
each
4.00
350.00
1400.00
Code
Description
2334

= 0.0456 cum = 0.068 tonne
Carriage of Cement
= 0.0916 cum = 0.092 cum
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of 10 metres
Cost of 1 metre
Say
0367
2209
0983
2261
0123
0124
0114
0101
Unit
Quantity
Rate
Amount
100 metre
0.10
7560.57
756.06
tonne
tonne
0.068
0.068
5700.00
92.24
387.60
6.27
cum
0.092
760.00
69.92
cum
0.092
103.77
9.55
day
day
day
day
1.59
1.59
8.67
0.67
487.00
448.00
368.00
407.00
774.33
712.32
3190.56
272.69
24349.30
243.49
24592.79
3688.92
28281.71
2828.17
2828.15
19.7
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse

sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement
: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside
plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement and making channels in cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) finished with a floating coat of neat cement complete as per
standard design :
19.7.1
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light
duty) 455x610 mm internal dimensions, total weight of cover and frame to be
not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
19.7.1.1
Code
4.1.8
Description
Details of cost for 1 manhole
mm nominal size)
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
Work
75 in foundation & plinth in cement mortar
1:4 (1 cement : 4 coarse sand)
4.32x0.23x0.35 m = 0.348 cum
1415
Unit
Quantity
cum
0.43
Rate
Amount
4478.15 1925.60(A)
Code
6.1.1
4.1.3
13.9.1
5.3
0115
5.22.1
5.9.3
0123
0124
1354
9977
9999
Description
Less for pipe 2x3.14x(0.15m)x0.23m
= (-) 0.008 cum
Total = 0.340 cum
Rate as per item no 6.1.1 of SH : Brick
Work
mm nominal size) for benching
2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum
Less for pipe 1x0.90x3.14/4x(0.15m) =
(-) 0.02 cum
= 0.16 cum
Rate as per item no. 4.1.3 of SH : Concrete
Work
neat cement
3.40mx0.05m = 0.17 sqm
2xx0.80x0.10m = 0.08 sqm
Total= 0.25 sqm
Reinforced cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size)
For slab : 1.36x1.26x0.15m = 0.257 cum
Less for cover 0.61x0.455x0.15m
= (-) 0.042 cum
= 0.215 cum Say 0.22 cum
Rate as per item no 5.3 of SH : RCC Work
Less labour for not lifting the materilas upto
floor five level
Coolie
Mild steel reinforcement for slab :
0.22 cum @ 48.06 kg/cum = 10.57 kg
work
Form work = 0.90x0.80 = 0.72 sqm
Less cover = 0.61x0.455m = (-) 0.278 sqm
= 0.442 sqm Say 0.44 sqm
Rate as per item no 5.9.3 of SH : RCC Work
LABOUR
Extra labour for making channel :
Rectangular cover 455x610 mm with frame
(low duty)
(inside)
Carriage of C.I. cover & frame
Painting of C.I. cover & frame with coal tar
1416
Unit
Quantity
Rate
Amount
cum
0.34
4970.30 1689.90(A)
cum
0.16
5481.95
877.11(A)
sqm
0.25
234.70
58.68(A)
cum
0.22
day
-0.41
368.00
-150.88
kg
10.57
55.30
584.52(A)
sqm
0.44
422.30
185.81(A)
day
day
0.06
0.06
487.00
448.00
29.22
26.88
each
1.00
1500.00
1500.00
L.S.
L.S.
6.76
6.76
1.73
1.73
11.69
11.69
7390.80 1625.98(A)
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
i.e. on (8399.59 - 6947.60) = 1451.99
TOTAL
- 6947.60) = 1466.51
Cost of each
Say
L.S.
13.52
19.7.1.2
Code
4.1.8
6.36.1
4.1.3
13.9.1
Rate
1.73
Amount
23.39
8399.59
14.52
8414.11
219.98
8634.09
8634.10

Description
mm nominal size)
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
Work
IS:4885 in cement mortar 1:4 (1 cement :4
coarse sand)
4.32x0.23x0.35 m = 0.348 cum
= (-) 0.008 cum
Total= 0.340 cum
Work
2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum
Less for pipe 1x0.90x3.14/4x(0.15m)
= (-) 0.02 cum
Total= 0.16 cum
Work
neat cement
3.40mx0.05m = 0.17 sqm
2xx0.80x0.10m = 0.08 sqm
Total= 0.25 sqm
For slab : 1.36x1.26x0.15m = 0.257 cum
= (-) 0.042 cum
= 0.215 cum Say 0.22 cum
1417
Unit
Quantity
Rate
Amount
cum
0.43
4478.15 1925.60(A)
cum
0.34
5102.00 1734.68(A)
cum
0.16
5481.95
877.11(A)
sqm
0.25
234.70
58.68(A)
Code
Description
Unit
Quantity
5.3

floor five level
Coolie
0.22 cum @ 48.06 kg/cum = 10.57 kg
work
Form work = 0.90x0.80 = 0.72 sqm
= 0.442 sqm Say 0.44 sqm
Less cover = 0.61x0.455m = (-) 0.278 sqm
LABOUR
Rectangular cover 455x610 mm with frame
(low duty)
(inside)
Sundries
TOTAL
i.e. on (8444.37 - 6992.38) = 1451.99
TOTAL
- 6992.38) = 1466.51
Cost of each
Say
cum
0.22
day
-0.41
368.00
-150.88
kg
10.57
55.30
584.52(A)
sqm
0.44
422.30
185.81(A)
day
day
0.06
0.06
487.00
448.00
29.22
26.88
each
1.00
1500.00
1500.00
L.S.
L.S.
L.S.
6.76
6.76
13.52
1.73
1.73
1.73
11.69
11.69
23.39
8444.37
0115
5.22.1
5.9.3
0123
0124
1354
9977
9999
9999
Rate
Amount
7390.80 1625.98(A)
14.52
8458.89
219.98
8678.87
8678.85
19.7.2
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium
duty) 500 mm internal diameter, total weight of cover and frame to be not less
than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :
19.7.2.1
Code
4.1.8
Description
Unit
Quantity

MATERIAL
mm nominal size)
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
Work
5.12x0.23x0.80 m = 0.942 cum
Less for pipe 2x3.14x(0.15m)x0.23m =
(-) 0.008 cum
Total= 0.934 cum Say 0.93 cum
cum
0.55
1418
Rate
Amount
4478.15 2462.98(A)
Code
Description
Unit
Quantity
6.1.1

2x1.20x(0.90/2) x (0.30+0.20)/2 = 2.70 cum
Less for pipe 1.20x3.14/4x(0.15m)
= (-) 0.021 cum
Total= 0.249 cum say 0.25
Work
neat cement
4.20mx0.50m = 2.10 sqm
2xx0.90x0.10m
= 2.19 sqm
For slab : 1.66x1.36x0.15m = 0.339 cum
Less for cover 0.7854x(0.50)x0.15m
= (-) 0.029 cum
= 0.31 cum
floor five level
Coolie
0.31 cum @ 80.09 kg/cum = 24.83 kg
Form work = 1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50) = (-) 0.196 sqm
= 0.884 sqm Say 0.88 sqm
LABOUR
500 mm dia cover with frame (medium duty)
Sundries
TOTAL
i.e. on (17669.24 - 13005.71) = 4663.53
TOTAL
- 13005.71) = 4710.17
Cost of each
Say
cum
4.1.3
13.9.1
5.3
0115
5.22.1
5.9.3
0123
0124
1356
9977
9999
9999
1419
Rate
Amount
0.93
4970.30
4622.38(A)
cum
0.25
5481.95 1370.49(A)
sqm
2.19
cum
0.31
day
-0.58
368.00
-213.44
kg
24.83
55.30
1373.10(A)
sqm
0.88
422.30
371.62(A)
day
day
each
L.S.
L.S.
L.S.
0.08
0.08
1.00
6.76
6.76
16.64
487.00
448.00
4750.00
1.73
1.73
1.73
38.96
35.84
4750.00
11.69
11.69
28.79
17669.24
234.70
513.99(A)
7390.80 2291.15(A)
46.64
17715.88
706.53
18422.41
18422.40
19.7.2.2
Code
4.1.8
6.36.1
4.1.3
13.9.1
5.3
0115
5.22.1
5.9.3

Description
MATERIAL
mm nominal size)
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
Work
5.12x0.23x0.80 m = 0.942 cum
= (-) 0.008 cum
= 0.934 cum Say 0.93 cum
Rate as per item No 6.36.1 of SH : Brick Work
2x1.20x(0.90/2) x (0.30+0.20)/2 = 2.70 cum
= (-) 0.021 cum
= 0.249 cum say 0.25
Work
neat cement
4.20mx0.50m = 2.10 sqm
2xx0.90x0.10m = 0.08sqm
= 2.19 sqm
For slab : 1.66x1.36x0.15m = 0.339 cum
= (-) 0.029 cum
= 0.31 cum
floor five level
Coolie
0.31 cum @ 80.09 kg/cum = 24.83 kg
Form work = 1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50) = (-) 0.196 sqm
= 0.884 sqm Say 0.88 sqm
1420
Unit
Quantity
Rate
cum
0.55
4478.15 2462.98(A)
cum
0.93
5102.00
cum
0.25
5481.95 1370.49(A)
sqm
2.19
cum
0.31
day
-0.58
368.00
-213.44
kg
24.83
55.30
1373.10(A)
sqm
0.88
422.30
371.62(A)
234.70
Amount
4744.86(A)
513.99(A)
7390.80 2291.15(A)
Code
0123
0124
1356
9977
9999
9999
Description
LABOUR
500 mm dia cover with frame (medium duty)
Sundries
TOTAL
i.e. on (17791.72 - 13128.19) = 4663.53
TOTAL
- 13128.19) = 4710.17
Cost of each
Say
Unit
Quantity
day
day
each
L.S.
L.S.
L.S.
0.08
0.08
1.00
6.76
6.76
16.64
Rate
487.00
448.00
4750.00
1.73
1.73
1.73
Amount
38.96(A)
35.84
4750.00
11.69
11.69
28.79
17791.72
46.64
17838.36
706.53
18544.89
18544.90
19.7.3
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy
duty) 560 mm internal diameter, total weight of cover and frame to be not less
than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :
19.7.3.1
Code
4.1.8
6.1.1
Description
MATERIAL
mm nominal size)
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
Work
5.12x0.23x0.65 m = 0.765 cum
1x0.56x0.23x0.15 m = 0.019 cum
1x0.79x0.23x0.15 = 0.027 cum
= 0.811 cum
= (-) 0.008 cum
= 0.803 cum Say 0.80 cum
coarse sand : 4 graded stone aggregate
20 mm nominal size) for benching
2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.27 cum
Less for pipe 1.20x3.14/4x(0.15m) =
(-) 0.021 cum
= 0.249 cum say 0.25
1421
Unit
Quantity
Rate
Amount
cum
0.55
4478.15 2462.98(A)
cum
0.80
4970.30
3976.24(A)
Code
Description
4.1.3

Work
neat cement
4.20mx0.35m = 1.47 sqm
2x0.56x0.15 m = 0.17 sqm
2xx0.90x0.10m = 0.09 sqm
For fixing cover
0.96x0.96 m =0.922 sqm
= 2.652 sqm
Less cover 3.14/4x(0.56) = (-) 0.246 sqm
= 2.406 sqm Say 2.41 sqm
For slab : 1.66x1.36x0.15m = 0.339 cum
Add extra concreting 1x(0.56+0.79)x
0.15x0.15 m = 0.03 cum
Total= 0.369 cum
= (-) 0.037 cum
= 0.332 cum Say 0.33 cum
floor five level
Coolie
Steel reinforcement for slab @ 80.09 Kg/cum
For 0.33 cum = 26.43 kg.
Form work inside area of man-hole
1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56) = (-) 0.246 sqm
= 0.834 sqm Say 0.83 sqm
LABOUR
560 mm dia cover with frame (Heavy duty)
Sundries
TOTAL
i.e. on (21543.19 - 12626.39) = 8916.80
TOTAL
- 12626.39) = 9005.97
Cost of each
Say
13.9.1
5.3
0115
5.22.1
5.9.3
0123
0124
3860
9977
9999
9999
1422
Unit
Quantity
Rate
Amount
cum
0.25
sqm
2.41
cum
0.33
day
-0.62
368.00
-228.16
kg
26.43
55.30
1461.58(A)
sqm
0.83
422.30
350.51(A)
day
day
each
L.S.
L.S.
L.S.
0.08
0.08
1.00
13.52
6.76
20.28
487.00
448.00
9000.00
1.73
1.73
1.73
38.96
35.84
9000.00
23.39
11.69
35.08
21543.19
5481.95 1370.49(A)
234.70
565.63(A)
7390.80 2438.96(A)
89.17
21632.36
1350.90
22983.26
22983.25
19.7.3.2
Code
4.1.8
6.36.1
4.1.3
13.9.1
5.3

Description
MATERIAL
mm nominal size)
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
Work
sewer bricks conforming to IS:4885 in
cement mortar 1:4 (1 cement :4 coarse
sand)
5.12x0.23x0.65 m = 0.765 cum
1x0.56x0.23x0.15 m = 0.019 cum
1x0.79x0.23x0.15 = 0.027 cum
Total= 0.811 cum
= (-) 0.008 cum
= 0.803 cum Say 0.80 cum
Work
20 mm nominal size) for benching
2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.27 cum
= (-) 0.021 cum
= 0.249 cum say 0.25
Work
neat cement
4.20mx0.35m = 1.47 sqm
2x0.56x0.15 m = 0.17 sqm
2xx0.90x0.10m = 0.09 sqm
For fixing cover
0.96x0.96 m =0.922 sqm
Total= 2.652 sqm
Less cover 3.14/4x(0.56) = (-) 0.246 sqm
= 2.406 sqm Say 2.41 sqm
For slab : 1.66x1.36x0.15m = 0.339 cum
Add extra concreting 1x(0.56+0.79)x
0.15x0.15 m = 0.03 cum
= 0.369 cum
= (-) 0.037 cum
= 0.332 cum Say 0.33 cum
Less labour for not lifting the materilas
1423
Unit
Quantity
Rate
Amount
cum
0.55
4478.15 2462.98(A)
cum
0.8
5102.00 4081.60(A)
cum
0.25
5481.95 1370.49(A)
sqm
2.41
234.70
565.63(A)
cum
0.33
7390.80
2438.96(A)
Code
Description
Unit
Quantity
0115
Coolie
Steel reinforcement for slab @ 80.09 Kg/cum
For 0.33 cum = 26.43 kg
Form work inside area of man-hole
1.20x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56) = (-) 0.246 sqm
= 0.834 sqm Say 0.83 sqm
LABOUR
560 mm dia cover with frame (Heavy duty)
Sundries
TOTAL
i.e. on (21648.55 - 12731.75) = 8916.80
TOTAL
- 12731.75) = 9005.97
Cost of each
Say
day
-0.62
368.00
-228.16
kg
26.43
55.30
1461.58(A)
sqm
0.83
422.30
350.51(A)
day
day
each
L.S.
L.S.
L.S.
0.08
0.08
1.00
13.52
6.76
20.28
487.00
448.00
9000.00
1.73
1.73
1.73
38.96
35.84
9000.00
23.39
11.69
35.08
21648.55
5.22.1
5.9.3
0123
0124
3860
9977
9999
9999
Rate
Amount
89.17
21737.72
1350.90
23088.62
23088.60
19.8
Extra for depth for manholes :
19.8.1
Size 90x80 cm
19.8.1.1
Code
6.1.1
13.9.1
Description
Details of cost for one meter
MATERIAL
75 in cement mortar 1:4 (1 cement :
4 coarse sand )
4.32x0.23x1.0 m = 0.994 cum Say 0.99 cum
Rate as per item no. 6.1.1 of S.H : brick work
3 coarse sand) finished with floating coat of
neat cement
3.40x1 m = 3.40 sqm
TOTAL
Cost for one metre
Say
1424
Unit
Quantity
Rate
Amount
cum
0.99
4970.30
4920.60
sqm
3.40
234.70
797.98
5718.58
5718.58
5718.60
19.8.1.2
Code
6.36.1
13.9.1

Description
MATERIAL
Brick work with modular extruded brunt fly
ash clay sewer bricks conforming to IS :
coarse sand )
4.32x0.23x1.0 m = 0.994 cum Say 0.99 cum
neat cement
3.40x1 m = 3.40 sqm
TOTAL
Cost for one metre
Say
Unit
Quantity
Rate
Amount
cum
0.99
5102.00
5050.98
sqm
3.40
234.70
797.98
5848.96
5848.96
5848.95
19.8.2
Size 120x90 cm
19.8.2.1
Code
6.1.1
13.9.1
19.8.2.2
Code
Description
MATERIAL
coarse sand )
5.12x0.23x1.0 m = 1.178 cum Say 1.18 cum
Rate as per item no. 6.1.1 of S.H : brick work
neat cement
4.20x1 m = 4.20 sqm
TOTAL
Cost for one metre
Say
Unit
Quantity
Rate
Amount
cum
1.18
4970.30
5864.95
sqm
4.20
234.70
985.74
6850.69
6850.69
6850.70

Description
Unit

MATERIAL
ash clay sewer bricks conforming to IS
:4885 in cement mortar 1:4 (1 cement :
4 coarse sand )
5.12x0.23x1.0 m = 1.178 cum Say 1.18 cum
1425
Quantity
Rate
Amount
Code
Description
Unit
Quantity
6.36.1

neat cement
4.20x1 m = 4.20 sqm
TOTAL
Cost for one metre
Say
cum
1.18
5102.00
6020.36
sqm
4.20
234.70
985.74
7006.10
7006.10
7006.10
13.9.1
Rate
Amount
19.9
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom
and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), in side
cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1
cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and
making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat
of neat cement, all complete as per standard design :
19.9.1
0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade
designation) 560 mm internal diameter conforming to I.S. 12592, total weight
of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4
(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
including centering, shuttering all complete. (Excavation, foot rests and 12mm
thick cement plaster at the external surface shall be paid for separately) :
19.9.1.1
Code
4.1.6
6.1.1
Description
MATERIAL
40 mm nominal size)
1.67x1.67x0.225 m = 0.63 cum
Work
4 coarse sand)
Curved on plan
3.14x1.14x0.074x0.23 = 0.061
3.14x(1.14+0.79)/2x0.711x0.23 = 0.496
Total= 0.557
Duduct arch ring and portion of pipe
2xx3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)x0.230 = 0.008 cum
Total= 0.026 cum
Net quantity 0.557-0.026 = 0.531 Say 0.53
Brick work in foundation with 75 class
designation brick in cement mortar 1:4 ( 1
cement : 4 fine sand )
1426
Unit
Quantity
Rate
Amount
cum
0.63
4814.55 3033.17(A)
cum
0.53
4970.30
2634.26(A)
Code
6.9
4.1.3
4.2.3
13.9.1
0123
0124
7135
9977
9999
Description
2xx3.14x0.25 m x0.230x0.10 m
= 0.018 cum Say 0.02 cum
Rate as per item no 6.9 of SH : Brick Work
Cement concrete 1:2:4(1 cement : 2 coarse
nominal size )
For benching :
3.14/4x(0.91+0.82)x0.20 = 0.118 cum
[(2x8.133)/360]x(4/3)x3.14x(0.45)
=0.017 cum
Total = 0.135 cum
Less pipe : 0.91x3.14/4x(0.15)2
= (-) 0.016 cum
= 0.119 cum Say 0.12 cum
Work
20 mm nominal size)
For fixing cover : 3.14/4 x d x thickness
3.14/4x(1.020)x0.15 m =0.123 cum
Less cover 3.14/4x(0.28) x 0.15 m
= (-) 0.037 cum
Total = 0.086 cum Say 0.09 cum
Work
neat cement
3.14x(0.80+0.56)/2x0.49 = 1.05 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(0.80)/4-0.80x0.15+0.80xx
3.14x0.15 = 0.57 sqm
Total= 1.75 sqm
LABOUR
S.F.R.C cover
Circular shape 560 mm dia precast R.C.C.
manhole cover with frame - H.D. - 20
CARRIAGE
Sundries
TOTAL
i.e. on (8519.45 - 7502.19) = 1017.26
TOTAL
- 7502.19) = 1027.43
Cost of one manhole
Say
1427
Unit
Quantity
Rate
Amount
cum
0.02
8845.60
176.91(A)
cum
0.12
5481.95
657.83(A)
cum
0.09
6547.70
589.29(A)
sqm
1.75
234.70
410.73(A)
day
day
0.06
0.06
487.00
448.00
29.22
26.88
each
L.S.
L.S.
1.00
6.89
16.9
920.00
1.73
1.73
920.00
11.92
29.24
8519.45
10.17
8529.62
154.11
8683.73
8683.75
19.9.1.2
Code
4.1.6
6.36.1
6.37
4.1.3
4.2.3

Description
MATERIAL
40 mm nominal size)
1.67x1.67x0.225 m = 0.63 cum
Work
4 coarse sand)
Curved on plan
3.14x1.14x0.074x0.23 = 0.061
3.14x(1.14+0.79)/2x0.711x0.23 = 0.496
= 0.557
2xx3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)x0.230 = 0.008 cum
Total= 0.026 cum
Net quantity 0.557-0.026 = 0.531 Say 0.53
Work
Brick work in arches with modular extruded
brunt fly ash clay sewer bricks conforming
to IS : 4885 in cement mortar 1:3 ( 1
2xx3.14x0.25 m x0.230x0.10 m
= 0.018 cum Say 0.02 cum
Rate as per item No 6.37 of SH : Brick Work
nominal size )
For benching :
3.14/4x(0.91+0.82)x0.20 = 0.118 cum
[(2x8.133)/360]x(4/3)x3.14x(0.45) =0.017 cum
Total= 0.135 cum
Less pipe : 0.91x3.14/4x(0.15)
= (-) 0.016 cum
Work
20 mm nominal size)
3.14/4x(1.020)x0.15 m =0.123 cum
Less cover 3.14/4x(0.28) x 0.15 m
= (-) 0.037 cum
Work
neat cement
1428
Unit
Quantity
Rate
Amount
cum
0.63
4814.55 3033.17(A)
cum
0.53
5102.00 2704.06(A)
cum
0.02
8355.00
167.10(A)
cum
0.12
5481.95
657.83(A)
cum
0.09
6547.70
589.29(A)
Code
13.9.1
0123
0124
7135
9977
9999
Description
3.14x(0.80+0.56)/2x0.49 = 1.05 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(0.80)/4-0.80x0.15+0.80xx3.14x
0.15 = 0.57 sqm
Total= 1.75 sqm
LABOUR
S.F.R.C cover
CARRIAGE
Sundries
TOTAL
i.e. on (8579.44 - 7562.18) = 1017.26
TOTAL
- 7562.18) = 1027.43
Cost of one manhole
Say
Unit
Quantity
Rate
Amount
sqm
1.75
234.70
410.73(A)
day
day
0.06
0.06
487.00
448.00
29.22
26.88
each
L.S.
L.S.
1.00
6.89
16.90
920.00
1.73
1.73
920.00
11.92
29.24
8579.44
10.17
8589.61
154.11
8743.72
8743.70
19.10
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond
0.91 m to 1.67 m
19.10.1
Code
6.1.1
4.1.3
13.9.1
Description
Detail of cost of 0.76 m depth
Brick work in foundation with 75 class
designation bricks in cement mortar 1:4
2 coarse sand : 4 graded stone 20mm
nominal size)
Work
12mm cement plaster 1:3 (1 cement :
3 coarse sand) finished with neat cement.
Cost for 0.76 metre
Cost for 1.00 metre
Say
1429
Unit
Quantity
Rate
Amount
cum
0.63
4970.30
3131.29
cum
0.01
5481.95
54.82
sqm
2.33
234.70
546.85
3732.96
4911.78
4911.80
19.10.2
Code
6.36.1
4.1.3
13.9.1
With Sewer bricks conforming IS : 4885

Description
Detail of cost of 0.76 m extra depth
Brick work with modular exturded burnt fire
clay bricks in cement montar 1:4 (1 cement
: 4 coarse sand)
Work
2 coarse sand : 4 graded stone 20mm
nominal size)
Work
neat cement.
Cost for 0.76 metre
Cost for 1.00 metre
Say
Unit
Quantity
Rate
Amount
cum
0.63
5102.00
3214.26
cum
0.01
5481.95
54.82
sqm
2.33
234.70
546.85
3815.93
5020.96
5020.95
19.11
Constructing brick masonry circular manhole 1.22 m internal dia at bottom

and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside
finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement
: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making
necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) finished with a floating coat of
neat cement, all complete as per standard design :
19.11.1
1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation)
560 mm internal diameter conforming to I.S. 12592, total weight of cover and
frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) including
centering, shuttering all complete. (Excavation, foot rests and 12 mm thick
cement plaster at the external surface shall be paid for separately) :
19.11.1.1
Code
4.1.6
Description
MATERIAL
mm nominal size)
1.98x1.98x0.30 m = 1.178 cum Say 1.18 cum
Work
4 coarse sand)
Curved on plan
1430
Unit
Quantity
cum
1.18
Rate
Amount
4814.55 5681.17(A)
Code
6.1.1
6.9
4.1.3
4.2.3
13.9.1
0123
0124
Description
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
Total= 1.320
2xx3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)x0.230 = 0.008 cum
Total = 0.026 cum
Net quantity 1.320-0.026 = 1.294 Say
1.29 cum
Brick work in arches with 75 class
designation brick in cement mortar 1:3
( 1 cement : 3 fine sand )
2xx3.14x0.25 m x0.230x0.10 m
= 0.018 cum Say 0.02 cum
nominal size )
For benching :
3.14/4x(1.22)x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)
=0.043 cum
Total= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)(-)
= 0.0216 cum
Work
20 mm nominal size)
3.14/4x(1.020)x0.15 m =0.123 cum
Less cover 3.14/4x(0.28) x 0.15 m :
(-) = 0.037 cum
Work
neat cement
3.14x(1.136+0.56)/2x1.216 = 3.241 sqm
3.14x0.56x0.075 = 0.13 sqm
3.14x(1.136)/4-1.136x1/2x3.14x0.15
= 1.112 sqm
Total= 4.483 sqm Say 4.48 sqm
LABOUR
S.F.R.C manhole cover
1431
Unit
Quantity
Rate
Amount
cum
1.29
4970.30
6411.69(A)
cum
0.02
8845.60
176.91(A)
cum
0.26
5481.95 1425.31(A)
cum
0.09
6547.70
589.29(A)
sqm
4.48
234.70
1051.46(A)
day
day
0.10
0.10
487.00
448.00
48.70
44.80
Code
Description
7135

CARRIAGE
Sundries
TOTAL
i.e. on (16390.49 - 15335.83) = 1054.66
TOTAL
- 15335.83) = 1065.21
Cost of one manhole
Say
9977
9999
19.11.1.2
Code
4.1.6
6.36.1
6.37
Unit
Quantity
each
L.S.
L.S.
1.00
6.89
16.9
Rate
920.00
1.73
1.73
Amount
920.00
11.92
29.24
16390.49
10.55
16401.04
159.78
16560.82
16560.80

Description
MATERIAL
40 mm nominal size)
1.98x1.98x0.30 m = 1.178 cum Say 1.18 cum
Work
ash clay sewer bricks in cement mortar 1:4
Curved on plan
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
Total = 1.320
2xx3.14x0.25mx0.230x0.10 m
= 0.018 cum
2x3.14/4x(0.15)x0.230 = 0.008 cum
Total= 0.026 cum
Net quantity 1.320-0.026 = 1.294
Say 1.29 cum
Work
brunt fly ash clay sewer bricks in cement
mortar 1:3 ( 1 cement : 3 fine sand )
2xx3.14x0.25 m x0.230x0.10 m
= 0.018 cum Say 0.02 cum
nominal size )
1432
Unit
Quantity
Rate
Amount
cum
1.18
4814.55 5681.17(A)
cum
1.29
5102.00 6581.58(A)
cum
0.02
8355.00
167.10(A)
Code
4.1.3
4.2.3
13.9.1
0123
0124
7135
9977
9999
Description
For benching :
3.14/4x(1.22)x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)
=0.043 cum
Total= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)(-)
= 0.0216 cum
Work
mm nominal size)
3.14/4(1.020)x0.15 m =0.123 cum
Less cover 3.14/4x(0.28) x 0.15 m : (-)
= 0.037 cum
neat cement
3.14x(1.136+0.56)/2x1.216 = 3.241 sqm
3.14x0.56x0.075 = 0.13 sqm
3.14x(1.136)/4-1.136x1/2x3.14x0.15
= 1.112 sqm
LABOUR
S.F.R.C manhole cover and frame
CARRIAGE
Sundries
TOTAL
i.e. on (16550.57 - 15495.91) = 1054.66
TOTAL
- 15495.91) = 1065.21
Cost of one manhole
Say
1433
Unit
Quantity
Rate
Amount
cum
0.26
5481.95 1425.31(A)
cum
0.09
6547.70
589.29(A)
sqm
4.48
234.70
1051.46(A)
day
day
0.10
0.10
487.00
448.00
48.70
44.80
each
L.S.
L.S.
1.00
6.89
16.9
920.00
1.73
1.73
920.00
11.92
29.24
16550.57
10.55
16561.12
159.78
16720.90
16720.90
19.12
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond
1.68 m to 2.29 m :
19.12.1
Code
6.1.1
13.9.1
19.12.2
Code
6.36.1
13.9.1
Description
4 coarse sand)
neat cement.
Cost for 0.61 metre
Cost for 1.00 metre
Say
Unit
Quantity
Rate
Amount
cum
0.66
4970.30
3280.40
sqm
2.56
234.70
600.83
3881.23
6362.67
6362.65

Description
Brick work with modular exturded burnt fire
clay bricks in cement montar 1:4 (1 cement
: 4 coarse sand)
neat cement.
Cost for 0.61 metre
Cost for 1.00 metre
Say
Unit
Quantity
Rate
Amount
cum
0.66
5102.00
3367.32
sqm
2.56
234.70
600.83
3968.15
6505.16
6505.15
19.13
Constructing brick masonry circular manhole 1.52 m internal dia at bottom

and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside
finished with a floating coat of neat cement, foundation concrete 1:3:6 (1
cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and
making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat
of neat cement, all complete as per standard design :
19.13.1
2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation)
560 mm internal diameter conforming to I.S. 12592, total weight of cover and
frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size) including
centering, shuttering all complete. (Excavation, foot rests and 12 mm thick
cement plaster at the external surface shall be paid for separately) :
1434
19.13.1.1
Code
4.1.6
6.1.1
6.9
4.1.3
4.2.3
Description
MATERIAL
mm nominal size)
2.74x2.74x0.30 m = 2.25 cum
Work
coarse sand)
Curved on plan
3.14x1.98x0.25x0.46 = 0.716 cum
3.14x(1.98+0.905)/2x0.345x1.93 = 3.019 cum
Total = 3.735 cum
2xx3.14x0.25mx0.46x0.10 m = 0.036 cum
2x3.14/4x(0.15)x0.460 = 0.016 cum
Total= 0.052 cum
Net quantity 3.735-0.052 = 3.683 cum
Say 3.68 cum
Brick work in arches with 75 class
designation brick in cement mortar 1:3 ( 1
2x1/2x3.14x0.25 m x0.460x0.10 m
= 0.036 cum Say 0.04 cum
nominal size )
For benching :
3.14/4x(1.52)x0.20 = 0.363 cum
[(2x8.133)/360]x(4/3)x3.14x(0.76) =0.083 cum
Total= 0.446 cum
Less pipe :1.52x3.14/4x(0.15)(-) = 0.027 cum
mm nominal size)
3.14/4x(1.020)x0.15 m =0.123 cum
Less cover 3.14/4x(0.28) x 0.15 m : (-)
= 0.037 cum
neat cement
3.14x(1.454+0.56)/2x1.799 = 5.694 sqm
3.14x0.56x0.075 = 0.13 sqm
1435
Unit
Quantity
Rate
Amount
cum
2.25
4814.55 10832.74(A)
cum
3.68
4970.30 18290.70(A)
cum
0.04
8845.60
cum
0.42
5481.95 2302.42(A)
cum
0.09
6547.70
353.82(A)
589.29(A)
Code
13.9.1
0123
0124
7135
9977
9999
19.13.1.2
Code
4.1.6
6.36.1
Description
Benching
3.14x(1.454)/4-1.454x0.15+1.454x1/2x
3.14x0.15 =1.786 sqm
Total= 7.61 sqm
LABOUR
S.F.R.C cover
CARRIAGE
Sundries
TOTAL
i.e. on (35209.70 - 34155.04) = 1054.66
TOTAL
- 34155.04) = 1065.21
Cost of one manhole
Say
Unit
Quantity
Rate
Amount
sqm
7.61
234.70
1786.07(A)
day
day
0.10
0.10
487.00
448.00
48.70
44.80
each
L.S.
L.S.
1.00
6.89
16.90
920.00
1.73
1.73
920.00
11.92
29.24
35209.70
10.55
35220.25
159.78
35380.03
35380.05

Description
MATERIAL
mm nominal size)
2.74x2.74x0.30 m = 2.25 cum
Work
Brick work with bricks modular extruded
mortar 1:4 (1 cement : 4 coarse sand)
Curved on plan
3.14x1.98x0.25x0.46 = 0.716 cum
3.14x(1.98+0.905)/2x0.345x1.93 = 3.019 cum
Total= 3.735 cum
2xx3.14x0.25mx0.46x0.10 m = 0.036 cum
2x3.14/4x(0.15)x0.460 = 0.016 cum
Total= 0.052 cum
Net quantity 3.735-0.052 = 3.683 cum
Say 3.68 cum
mortar 1:3 ( 1 cement : 3 fine sand )
1436
Unit
Quantity
Rate
Amount
cum
2.25
4814.55 10832.74(A)
cum
3.68
5102.00 18775.36(A)
Code
6.37
4.1.3
4.2.3
13.9.1
0123
0124
7135
9977
9999
Description
2x1/2x3.14x0.25 m x0.460x0.10 m
= 0.036 cum Say 0.04 cum
nominal size )
For benching :
3.14/4x(1.52)x0.20 = 0.363 cum
[(2x8.133)/360]x(4/3)x3.14x(0.76) =0.083 cum
Total= 0.446 cum
Less pipe :1.52x3.14/4x(0.15)(-) = 0.027 cum
= 0.419 cum Say 0.42 cum
20 mm nominal size)
3.14/4x(1.020)x0.15 m =0.123 cum
Less cover 3.14/4x(0.28) x 0.15 m : (-)
= 0.037 cum
Net Quantity= 0.086 cum Say 0.09 cum
neat cement
3.14x(1.454+0.56)/2x1.799 = 5.694 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(1.454)/4-1.454x0.15+1.454x1/2x
3.14x0.15 =1.786 sqm
Total= 7.61 sqm
LABOUR
S.F.R.C cover
CARRIAGE
Sundries
TOTAL
i.e. on (35674.74 - 34620.08) = 1054.66
TOTAL
- 34620.08) = 1065.21
Cost of one manhole
Say
1437
Unit
Quantity
Rate
Amount
cum
0.04
8355.00
cum
0.42
5481.95 2302.42(A)
cum
0.09
6547.70
589.29(A)
sqm
7.61
234.70
1786.07(A)
day
day
0.10
0.10
487.00
448.00
48.70
44.80
each
L.S.
L.S.
1.00
6.89
16.90
920.00
1.73
1.73
920.00
11.92
29.24
35674.74
334.20(A)
10.55
35685.29
159.78
35845.07
35845.05
19.14
Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond
2.30 m :
19.14.1
Code
6.1.1
13.9.1
19.14.2
Code
6.36.1
13.9.1
Description
75 in cement mortar 1:4 (1 cement: 4
coarse sand)
12 mm cement plaster 1:3 (1 cement: 3
neat cement
Cost for 1.88 metre
Cost for 1.00 metre
Say
Unit
Quantity
Rate
Amount
cum
5.26
4970.30
26143.78
sqm
8.99
234.70
2109.95
28253.73
15028.57
15028.55

Description
Brick work with modular exturded burnt fly
ash bricks in cement mortar 1:4 (1 cement:
4 coarse sand)
12 mm cement plaster 1:3 (1 cement: 3
neat cement
Cost for 0.61 metre
Cost for 1.00 metre
Say
Unit
Quantity
Rate
Amount
cum
5.26
5102.00
26836.52
sqm
8.99
234.70
2109.95
28946.47
15397.05
15397.05
19.15
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement
concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20
mm nominal size) as per standard design :
19.15.1
With 20x20 mm square bar
Code
1006
9988
0103
0114
Description
Unit
Details of cost for one M.S foot rests

MATERIAL
M.S. 20 mm square bar 0.75 m @ 3.137 kg/m
= 0.024
Mild steel square bars
Carriage, painting, and other sundries
LABOUR for fabrication
Beldar
20 mm nominal size)
0.20x0.20x0.10 m = 0.004 cum
1438
Quantity
Rate
Amount
quintal
L.S.
0.024
1.82
3675.00
1.73
88.20
3.15
day
day
0.10
0.10
448.00
368.00
44.80
36.80
Code
Description
4.2.5

work
LABOUR for fixing M.S. foot rests
Beldar
TOTAL
i.e. on (234.02 - 23.97) = 210.05
TOTAL
- 23.97) = 212.15
Cost for 1 no.
Say
0123
0124
0114
19.15.2
Code
1003
9988
0103
0114
4.2.5
0123
0124
0114
Unit
Quantity
Rate
Amount
cum
0.004
5992.75
23.97(A)
day
day
day
0.02
0.02
0.05
487.00
448.00
368.00
9.74
8.96
18.40
234.02
2.10
236.12
31.82
267.94
267.95
With 20 mm diameter round bar

Description
Unit

MATERIAL
M.S. round brass20 mm dia 0.75 m @
2.47kg 1 m = 0.018 q
Carriage,painting, and other sundries
Labour for fabrication
Beldar
Cement concrete 1:3:6 ( 1 cement :
20 mm nominal size)
0.20x0.20x0.10 m = 0.004 cum
work
LABOUR
Beldar
TOTAL
i.e. on (210.17 - 23.97) = 186.20
TOTAL
- 23.97) = 188.06
Cost for 1 no.
Say
1439
Quantity
Rate
Amount
quintal
L.S.
0.018
1.82
3575.00
1.73
64.35
3.15
day
day
0.10
0.10
448.00
368.00
44.80
36.80
cum
0.004
5992.75
23.97(A)
day
day
day
0.02
0.02
0.05
487.00
448.00
368.00
9.74
8.96
18.40
210.17
1.86
212.03
28.21
240.24
240.25
19.16
Code
7354
9988
4.2.5
0123
0124
0114
Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786,
having minimum cross section as 23 mmx25 mm and over all minimum length
263 mm and width as 165 mm with minimum 112 mm space between protruded
legs having 2 mm tread on top surface by ribbing or chequering besides
necessary and adequate anchoring projections on tail length on 138 mm as
per standard drawing and suitable to with stand the bend test and chemical
resistance test as per specifications and having manufacture's permanent
identification mark to be visible even after fixing, including fixing in manholes
with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size) complete as per design.
Description
MATERIAL
Plastic encapsuled M.S. foot rest
30x20x15 cm
Carriage and other sundries
Cement concrete 1:3:6 ( 0.30x0.20x15
= 0.009 cum)
work
LABOUR
Beldar
TOTAL
i.e. on (289.82 - 53.93) = 235.89
TOTAL
= 238.25
Cost for 1 no.
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
1.82
115.00
1.73
115.00
3.15
cum
0.009
5992.75
53.93(A)
day
day
day
0.02
0.20
0.05
487.00
448.00
368.00
9.74
89.60
18.40
289.82
2.36
292.18
35.74
327.92
327.90
19.17
Replacement of M.S. foot rests in manholes including dismantling concrete

blocks and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement :
3 coarse sand : 6 graded stone aggregate 20 mm nominal size):
19.17.1
With 20x20 mm square bar
Code
1006
9988
0103
0114
Description
Unit

MATERIAL
M.S. 20 mm square bar 0.75 m @ 3.137
kg/m =0.024 q
Mild steel square bars
Beldar
1440
Quantity
Rate
Amount
quintal
L.S.
0.024
1.82
3675.00
1.73
88.20
3.15
day
day
0.10
0.10
448.00
368.00
44.80
36.80
Code
4.2.5
0123
0124
0114
19.17.2
Code
1003
9988
0103
0114
4.2.5
0123
0124
0114
Description
mm nominal size)
0.20x0.20x0.10 m = 0.004 cum
work
LABOUR
for dismantling old forts rest cutting holes
and fixing new M.S. foot rests
Beldar
TOTAL
i.e. on (280.47 - 23.97) = 256.50
TOTAL
= 259.07
Cost for 1 no.
Say
Unit
Quantity
Rate
Amount
cum
0.004
5992.75
23.97(A)
day
day
day
0.05
0.05
0.1
487.00
448.00
368.00
24.35
22.40
36.80
280.47
2.57
283.04
38.86
321.90
321.90
With 20 mm diameter round bar

Description
Unit

MATERIAL
M.S. roumd bars 20 mm dia 0.75 m @
2.47 kg/m =0.018 q
Beldar
20 mm nominal size)
0.20x0.20x0.10 m = 0.004 cum
work
LABOUR
for dismantling old forts rest cutting holes
and fixing new M.S. foot rests
Beldar
TOTAL
i.e. on (256.62 - 23.97) = 232.65
TOTAL
- 23.97) = 234.98
Cost for 1 no.
Say
1441
Quantity
Rate
Amount
quintal
L.S.
0.018
1.82
3575.00
1.73
64.35
3.15
day
day
0.10
0.10
448.00
368.00
44.80
36.80
cum
0.004
5992.75
23.97(A)
day
day
day
0.05
0.05
0.10
487.00
448.00
368.00
24.35
22.40
36.80
256.62
2.33
258.95
35.25
294.20
294.20
19.18
Supplying and fixing C.I. cover without frame for manholes :
19.18.1
455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be
not less than 23 kg
Code
1355
9977
0114
19.18.2
Code
1357
9977
0114
19.18.3
Code
3861
9977
0114
Description
Details of cost for one cover
MATERIAL
Rectangular cover 455x610mm without
frame (low duty)
Carriage of C.I. Manhole cover
LABOUR
Beldar
TOTAL
TOTAL
Cost for 1 cover
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
7.15
1000.00
1.73
1000.00
12.37
day
0.12
368.00
44.16
1056.53
10.57
1067.10
160.07
1227.17
1227.15
500 mm diameter C.I. cover (medium duty) the weight of the cover to be not
less than 58 kg
Description
MATERIAL
500 mm dia cover without frame
(medium duty)
Carriage of C.I. cover
LABOUR
Beldar
TOTAL
TOTAL
Cost for 1 no.
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
13.47
2300.00
1.73
2300.00
23.30
day
0.12
368.00
44.16
2367.46
23.67
2391.13
358.67
2749.80
2749.80
560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less
than 108 kg
Description
MATERIAL
560 mm dia cover without frame (Heavy duty)
Carriage of C.I. cover
LABOUR
Beldar
TOTAL
TOTAL
Cost for 1 no.
Say
1442
Unit
Quantity
Rate
Amount
each
L.S.
1.00
16.12
5000.00
1.73
5000.00
27.89
day
0.12
368.00
44.16
5072.05
50.72
5122.77
768.42
5891.19
5891.20
19.19
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of
required shape and approved quality
19.19.1
L D- 2.5
19.19.1.1
Rectangular shape 600x450 mm internal dimensions
Code
7130
4.1.3
9977
9999
19.19.1.2
Code
7131
9977
4.1.3
Description
MATERIAL
Rectangular shape 600x450 mm precast
R.C.C. manhole cover with frame - L.D. - 25
coarse sand : 4 grade stone aggregate
20 mm nominal size )
1.00x0.85x0.15 = 0.1275 cum
Less cover with frame
0.85x0.70x0.15 = (-) 0.0893 cum
= 0.0382 cum Say 0.04 cum
Work
Carriage of R.C.C cover with frame
Sundries
TOTAL
i.e. on (954.36 - 219.28) = 735.08
TOTAL
= 742.43
Cost for 1 no.
Say
Unit
Quantity
Rate
Amount
each
1.00
700.00
700.00
cum
L.S.
L.S.
0.04
6.76
13.52
5481.95
1.73
1.73
219.28(A)
11.69
23.39
954.36
7.35
961.71
111.36
1073.07
1073.05
Square shape 450 mm internal dimensions

Description
MATERIAL
Square shape 450x450 mm precast R.C.C.
manhole cover with frame - L.D. - 25
Carriage of manhole cover
coarse sand : 4 grade stone aggregate 20
mm nominal size )
0.725x0.725x0.15 = 0.0788 cum
0.575x0.575x0.15 = (-) 0.0496 cum
= 0.0292 cum Say 0.03 cum
Work
1443
Unit
Quantity
Rate
Amount
each
L.S.
1.00
6.76
600.00
1.73
600.00
11.69
cum
0.03
5481.95
164.46(A)
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
i.e. on (799.54 - 164.46) = 635.08
TOTAL
= 641.43
Cost for 1 no.
Say
L.S.
13.52
19.19.1.3
Code
7132
9977
4.1.3
9999
23.39
799.54
96.21
902.10
902.10
Circular shape 450 mm internal diameter

Description
MATERIAL
manhole cover with frame - L.D. - 25
mm nominal size )
3.14/4x(0.775)x0.15 = 0.0708 cum
3.14/4x(0.625)x0.15 = (-) 0.0460 cum
= 0.0248 cum Say 0.03 cum
Work
Sundries
TOTAL
i.e. on (799.54 - 164.46) = 635.08
TOTAL
= 641.43
Cost for 1 no.
Say
Unit
Quantity
each
L.S.
1.00
6.76
600.00
1.73
600.00
11.69
cum
L.S.
0.03
13.52
5481.95
1.73
164.46(A)
23.39
799.54
Square shape 450 mm internal dimension

Description
Unit
Quantity

MATERIAL
Rectangular shape 500x500 mm precast
R.C.C. manhole cover with frame - M.D. - 10
each
1.00
1444
Amount
96.21
902.10
902.10
19.19.2.1
Rate
6.35
805.89
M D - 10
7133
1.73
Amount
6.35
805.89
19.19.2
Code
Rate
Rate
700.00
Amount
700.00
Code
Description
Unit
Quantity
9977

2 coarse sand : 4 grade stone aggregate
0.95x0.95x0.15 = 0.1354 cum
0.80x0.80x0.15 = (-) 0.096 cum
= 0.0394 cum Say 0.04 cum
Work
Sundries
TOTAL
i.e. on (959.76 - 219.28) = 740.48
TOTAL
= 747.88
Cost for 1 no.
Say
L.S.
6.76
1.73
11.69
cum
L.S.
0.04
16.64
5481.95
1.73
219.28(A)
28.79
959.76
4.1.3
9999
19.19.2.2
Code
7134
9977
4.1.3
9999
Rate
Amount
7.40
967.16
112.18
1079.34
1079.35

Description
MATERIAL
manhole cover with frame - M.D. - 10
mm nominal size )
3.14/4x(0.95)x0.15 = 0.1064 cum
3.14/4x(0.8)x0.15 = (-) 0.0754 cum
= 0.031 cum Say 0.03 cum
Work
Sundries
TOTAL
i.e. on (804.94 - 164.46) = 640.48
TOTAL
= 646.88
Cost for 1 no.
Say
1445
Unit
Quantity
Rate
Amount
each
L.S.
1.00
6.76
600.00
1.73
600.00
11.69
cum
L.S.
0.03
16.64
5481.95
1.73
164.46(A)
28.79
804.94
6.40
811.34
97.03
908.37
908.35
19.19.3
H D - 20
19.19.3.1
Code
7135
9977
4.1.3
9999
Description
MATERIAL
mm nominal size )
3.14/4x(1.05)x0.15 = 0.1299 cum
3.14/4x(0.9)x0.15 = (-) 0.0955 cum
= 0.0344 cum Say 0.03 cum
Work
Sundries
TOTAL
i.e. on (1142.93 - 164.46) = 978.47
TOTAL
= 988.25
Cost for 1 no.
Say
19.19.4
EHD - 35
19.19.4.1
Circular shape 560 mm internal dia
Code
7136
9977
4.1.3
Description
MATERIAL
manhole cover with frame - E.H.D. - 35
mm nominal size )
3.14/4x(1.05)x0.15 = 0.1299 cum
3.14/4x(0.9)x0.15 = (-) 0.0955 cum
= 0.0344 cum Say 0.03 cum
Work
1446
Unit
Quantity
Rate
Amount
each
L.S.
1.00
13.52
920.00
1.73
920.00
23.39
cum
L.S.
0.03
20.28
5481.95
1.73
164.46(A)
35.08
1142.93
9.78
1152.71
148.24
1300.95
1300.95
Unit
Quantity
Rate
Amount
each
L.S.
1.00
13.52
1225.00
1.73
1225.00
23.39
cum
0.03
5481.95
164.46(A)
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
i.e. on (1447.93 - 164.46) = 1283.47
TOTAL
= 1296.30
Cost for 1 no.
Say
L.S.
20.28
19.20
Code
1353
9988
0114
Rate
1.73
Amount
35.08
1447.93
12.83
1460.76
194.45
1655.21
1655.20
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap
(standard pattern) the weight of cover to be not less than 4.5 kg
Description
MATERIAL
C.I.cover without frame 300x300mm inside
i.e.cover of 4.50 kg
Carriage for cover
LABOUR
Beldar
TOTAL
TOTAL
Cost for 1 cover
Say
Unit
Quantity
Rate
Amount
each
L.S.
1.00
2.70
225.00
1.73
225.00
4.67
day
0.03
368.00
11.04
240.71
2.41
243.12
36.47
279.59
279.60
19.21
Making connection of drain or sewer line with existing manhole including

breaking into and making good the walls, floors with cement concrete 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse
sand), finished with a floating coat of neat cement and making necessary
channels for the drain etc. complete :
19.21.1
For pipes 100 to 250 mm diameter
Code
4.1.3
Description
Details of cost for one connection
MATERIAL
coarse sand : 4 grade stone aggregate
20 mm nominal size)
= 0.30x0.30x0.23 m = 0.0207 cum
Less pipe = 1/2x3.14x0.23x0.23x0.23
= 0.0096 cum
= 0.0111 cum Say 0.01 cum
12 mm cement plater 1:3 ( 1 cement : 3
coarse sand ) finished with a floating coat
of neat cement
1447
Unit
Quantity
cum
0.01
Rate
5481.95
Amount
54.82(A)
Code
13.9.1
0123
0124
0114
9999
19.21.2
Code
4.1.3
13.9.1
0123
0124
0114
Description
2x0.35x0.35 =0.25sqm
LABOUR
(For cutting holes average size 30x30 cm
in 23 cm thick wall and making channel
etc.)
Beldar
Add for delay sundries etc.
TOTAL
i.e. on (352.56 - 113.50) = 239.06
TOTAL
= 241.45
Cost for 1 connection
Say
Unit
Quantity
Rate
Amount
sqm
0.25
234.70
58.68(A)
day
day
day
L.S.
0.12
0.12
0.25
20.15
487.00
448.00
368.00
1.73
58.44
53.76
92.00
34.86
352.56
2.39
354.95
36.22
391.17
391.15

Description
MATERIAL
Cement concrete 1:2:4 mix ( 1 cement : 2
mm nominal size )
= 0.35x0.35x0.30 m = 0.037 cum
Less pipe = 1/2x3.14x0.30x0.30x0.30
= 0.021 cum
= 0.016 cum Say 0.02 cum
Work
of neat cement
2x0.40x0.40 =0.32 sqm
LABOUR
etc.)
Beldar
1448
Unit
Quantity
Rate
Amount
cum
0.02
5481.95
109.64(A)
sqm
0.32
234.70
75.10(A)
day
day
day
0.12
0.12
0.25
487.00
448.00
368.00
58.44
53.76
92.00
Code
Description
Unit
Quantity
9999

TOTAL
i.e. on (424.70 - 184.74) = 239.96
TOTAL
= 242.36
Say
L.S.
20.67
19.21.3
Code
4.1.3
13.9.1
0123
0124
0114
9999
Rate
1.73
Amount
35.76
424.70
2.40
427.10
36.35
463.45
463.45

Description
MATERIAL
Cement concrete 1:2:4 mix ( 1 cement : 2
mm nominal size )
= 0.50x0.50x0.30 m = 0.075 cum
Less pipe = 1/2x3.14x0.45x0.45x0.30
= 0.048 cum
= 0.027 cum Say 0.03 cum
Work
of neat cement
2x0.55x0.55 =0.605 sqm Say 0.60 sqm
LABOUR
etc.)
Beldar
TOTAL
i.e. on (622.87 - 305.28) = 317.59
TOTAL
= 320.77
Say
1449
Unit
Quantity
Rate
Amount
cum
0.03
5481.95
164.46(A)
sqm
0.60
234.70
140.82(A)
day
day
day
L.S.
0.16
0.16
0.33
26.91
487.00
448.00
368.00
1.73
77.92
71.68
121.44
46.55
622.87
3.18
626.05
48.12
674.17
674.15
19.22
Providing sand cast iron drop connection externally for 60 cm drop from branch
sewer line to main sewer manhole including inspection and cleaning eye with
chain and lid, sand cast iron drop pipe and bend encased all-round with cement
nominal size) with all centering and shuttering required, cutting holes in walls
and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse
sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside
of the manhole wall, lead caulked joints between sand cast iron pipes and
fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand
cast iron tee and S.W. pipe, making required channels complete as per standard
design and specifications :
19.22.1
100 mm dia sand cast iron drop connection
Code
1617
9977
18.83.2
1336
1621
1628
6.1.1
4.1.11
Description
Details of cost for one drop connection
MATERIAL
= 38+30+33 =101 cm say 1 metre
Length of pipe = 1m. Hence, Qty = 1 /
1.8 =0.55556 Nos
Carriage of pipe
Cutting charges
Rate as per item no 18.83.2 of SH: Water
supply
Clearing eye with chain and lid 100 mm dia
100x100x100 mm dia
Brick work in cement mortar 1:4
0.20x0.20x0.23 = 0.009 cum
Less pipe 1/2x3.14x0.10x0.10x0.23
= 0.002 cum
Net Qty= 0.009 - 0.002 = 0.007 cum
Cement concrete 1:5:10 (1 cement : 5 fine
nominal size)
0.40x0.45x1.05 m = 0.189 cum
0.40x0.25x0.40 = 0.040 cum
Total= 0.229 cum
Less pipe portion
1/2x3.14x0.10x0.10x1.50 = 0.012 cum
Toothing portion
2x0.40x0.05x0.10 m = 0.004 cum
= 0.016 cum
Net Qty= 0.229-0.016 = 0.213 cum Say
0.21 cum
SH : Concrete Work
neat cement
1x0.25x0.25 m = 0.0625 Say 0.06 sqm
1450
Unit
Quantity
Rate
Amount
each
0.55556
1150.00
638.89
L.S.
1.43
1.73
2.47
each cut
each
each
3.00
1.00
1.00
84.95
44.00
350.00
254.85(A)
44.00
350.00
each
1.00
450.00
450.00
cum
0.007
4970.30
34.79(A)
cum
0.21
3959.70
831.54(A)
Code
Description
Unit
Quantity
13.9.1

Providing lead caulked joints to 100 mm
diameter pipe and special
Rate as per item no. 12.39.1 of SH : Roofing
Providing joint to S.W. pipe with cement
mortar 1:1 (1 cement : 1 fine sand)
Form work
1.30x1.05 m = 1.36 sqm
Rate as per item no 5.9.2 of SH : RCC
Sundries including carriage of bends etc.
LABOUR
For cutting holes 5 cm deep in alternate
course of brick work benching and channel
Beldar
TOTAL
i.e. on (6116.52 - 2889.96) = 3226.56
TOTAL
= 3258.83
Cost of one drop connection
Say
sqm
0.06
234.70
14.08
each
4.00
309.95
1239.80(A)
L.S.
26.91
1.73
46.55
sqm
L.S.
1.36
26.91
378.60
1.73
514.90(A)
46.55
day
day
day
0.70
0.70
2.70
487.00
448.00
368.00
340.90
313.60
993.60
6116.52
12.39.1
9999
5.9.2
9988
0123
0124
0114
19.22.2
Code
1618
9977
18.83.4
1337
1622
7087
6.1.1
Rate
Amount
32.27
6148.79
488.82
6637.61
6637.60
150 mm dia sand cast iron drop connection

Description
Details of cost for one drop connection
MATERIAL
= 34.5+30+37 =101.5cm say 1.00m
Length of pipe = 1m. Hence, Qty
= 1 / 1.8 =0.55556 No.s
Carriage of pipe
Cutting charges
Rate as per item no 18.83.4 of SH Water
Supply
Clearing eye with chain and lid 150 mm dia
S.C.I. Tee 150 mm
Brick work in cement mortar
0.20x0.20x0.23 = 0.009 cum
Less pipe 1/2x3.14x0.15x0.15x0.23
= 0.004 cum
Net Qty= 0.005 cum
nominal size)
1451
Unit
Quantity
Rate
Amount
each
0.55556
1750.00
972.23
L.S.
1.82
1.73
3.15
each cut
each
each
each
3.00
1.00
1.00
1.00
159.65
50.00
400.00
600.00
478.95(A)
50.00
400.00
600.00
cum
0.005
4970.30
24.85(A)
Code
4.1.11
13.9.1
12.39.2
9999
5.9.2
9988
0123
0124
0114
Description
0.45x0.50x1.15 m = 0.259 cum
0.45x0.25x0.45 = 0.0510 cum
= 0.310 cum
Less pipe portion
1/4x3.14x0.15x0.15x1.50 = 0.027 cum
Toothing portion
3x0.45x0.05x0.10 m = 0.004 cum
= 0.027 + 0.004 = 0.031 cum
Net Qty 0.310-0.031 = 0.279 cum
Say 0.28 cum
neat cement
1x0.25x0.25 m = 0.0625 Say 0.06 sqm
Providing lead caulked joints to 150 mm
diameter pipe and special
Rate as per item no. 12.39.2 of SH : Roofing
Providing joint to S.W. pipe with cement
mortar 1:1 (1 cement : 1 fine sand)
Form work
1.450x1.15 m = 1.67 sqm
Sundries including carriage of bends etc.
LABOUR
For cutting holes 45 holes 5 cm deep
toothing in alternate course of brick work
benching and making channel
Beldar
TOTAL
i.e. on (8217.95 - 3981.86) = 4236.09
TOTAL
= 4278.45
Say
Unit
Quantity
Rate
Amount
cum
0.28
3959.70
1108.72(A)
sqm
0.06
234.70
14.08(A)
each
4.00
430.75
1723.00(A)
L.S.
39.91
1.73
69.04
sqm
L.S.
1.67
34.06
378.60
1.73
632.26(A)
58.92
day
day
day
0.85
0.85
3.50
487.00
448.00
368.00
413.95
380.80
1288.00
8217.95
42.36
8260.31
641.77
8902.08
8902.10
19.23
Extra for depths beyond 60 cm of sand cast iron drop connection complete:
19.23.1
For 100 mm dia sand cast iron drop connection
Code
1617
Description
MATERIAL
= 1 / 1.8 = 0.55556 Nos.
1452
Unit
Quantity
each
0.55556
Rate
1150.00
Amount
638.89
Code
Description
Unit
Quantity
9977

nominal size)
0.40x0.45x1.00 mm = 0.18 cum
Less pipe portion
1/2x3.14x0.10x0.10x1.00 = 0.008 cum
Toothing portion
5x0.40x0.05x0.10 m = 0.010 cum
Total= 0.018 cum
Net Qty= 0.18-0.018 = 0.162 cum Say
0.16 cum
SH : Concrete Work
Form work
1.30x1.00 m = 1.30 sqm
Sundries
LABOUR
For cutting holes 5 cm deep in alternate
course of brick work
Beldar
TOTAL
i.e. on (1852.27 - 1125.73) = 726.54
TOTAL
= 733.81
Say
L.S.
13.39
1.73
23.16
cum
0.16
3959.70
633.55(A)
sqm
L.S.
1.30
7.15
378.60
1.73
492.18(A)
12.37
day
day
day
0.04
0.04
0.04
487.00
448.00
368.00
19.48
17.92
14.72
1852.27
4.1.11
5.9.2
9999
0123
0124
0114
19.23.2
Code
1618
9977
Rate
Amount
7.27
1859.54
110.07
1969.61
1969.60
For 150 mm dia sand cast iron drop connection

Description
MATERIAL
= 1 / 1.8 = 0.55556 Nos.
nominal size)
0.45x0.50x1.00 mm = 0.225 cum
Less pipe portion
1/2x3.14x0.15x0.15x1.00 = 0.018 cum
Toothing portion
5x0.45x0.05x0.10 m = 0.011 cum
Total = 0.029 cum
1453
Unit
Quantity
Rate
Amount
each
0.55556
1750.00
972.23
L.S.
13.39
1.73
23.16
Code
4.1.11
5.9.2
9999
0123
0124
0114
Description
Net 0.225-0.029 = 0.196 cum Say 0.20 cum
SH : Concrete Work
Form work
1.45x1.00 m = 1.45 sqm
Sundries
LABOUR
For cutting 5 cm deep in alternate course
of brick work
Beldar
TOTAL
i.e. on (2415.45 - 1340.91) = 1074.54
TOTAL
= 1085.29
Say
Unit
Quantity
Rate
Amount
cum
0.20
3959.70
791.94(A)
sqm
L.S.
1.45
8.09
378.60
1.73
548.97(A)
14.00
day
day
day
0.05
0.05
0.05
487.00
448.00
368.00
24.35
22.40
18.40
2415.45
10.75
2426.20
162.79
2588.99
2589.00
19.24
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame,
including stacking of useful materials near the site and disposal of
unserviceable materials into municipal dumps within 50 m lead :
19.24.1
Rectangular manhole 90x80 cm and 45 cm deep
Code
15.2.2
15.7.4
Description
Details of cost of a manhole 90x80 cm and
45 cm deep
Dismantling of cement concrete 1:4:8 (1
cement : 4 coarse sand 8 : aggregate stone
40 mm nominal size)
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
SH : Dismantling and demolishing
Dismantling of secon class brick work in
cement mortar 1:4 (1 cement : 4 coarse
sand)
4.32x0.23x0.35 m = 0.348 cum
Less for pipe 2x3.14x(0.15m) x0.23m
= (-) 0.008 cum
Net Qty 0.348 - 0.008 = 0.340 cum
SH :dismantling and dimolishing
Dismantling cement concrete 1:2:4 ( 1
For benching 2x0.90x(0.80/2) x
(0.30+0.20)/2 = 0.18 cum
1454
Unit
Quantity
Rate
Amount
cum
0.43
615.15
264.51(A)
cum
0.34
842.75
286.54(A)
Code
15.2.1
15.3
9999
19.24.2
Code
15.2.2
15.7.4
Description
Less for pipe 1x0.90x3.14/4x(0.15m) = (-)
0.02 cum
Net qty= 0.16 cum
Dismantling of R.C.C slab of 1:2:4 (1
cement : 2 coarse sand : 4 grade stone
For slab : 1.36x1.26x0.15m = 0.257 cum
= (-) 0.042 cum
Net qty= 0.215 cum Say 0.22 cum
Rate as per item no 15.3 of
SH : Demolishing and dismantling
Removal of C.I. Cover with frame
TOTAL
i.e. on (1042.95 - 1030.58) = 12.37
TOTAL
- 1030.58) = 12.49
Cost of one no
Say
Unit
Quantity
Rate
Amount
cum
0.16
997.05
159.53(A)
cum
L.S.
0.22
7.15
1454.55
1.73
320.00(A)
12.37
1042.95
0.12
1043.07
1.87
1044.94
1044.95
Rectangular manhole 120x90 cm and 90 cm deep

Description
Details of cost of a manhole 120x90 and
90 cm deep
40 mm nominal size)
1.81x1.51x0.20 m = 0.547 cum Say 0.55 cum
Dismantling of secon class brick work in
sand)
5.12x0.23x0.80 m = 0.942 cum
Less for pipe 2x3.14x(0.15m)x0.23 m
= (-) 0.008 cum
Net qty = 0.934 cum Say 0.93 cum
2x1.20x0.90x(0.80/2) x (0.30+0.20)/2
= 2.70 cum
= (-) 0.021 cum
= 0.249 cum say 0.25
1455
Unit
Quantity
Rate
Amount
cum
0.55
615.15
338.33(A)
cum
0.93
842.75
783.76(A)
Code
Description
15.2.1

For slab : 1.66x1.36x0.15m = 0.339 cum
Less for cover 3.14/4x(0.50)x0.15m
= (-) 0.029 cum
Net qty = 0.31 cum
TOTAL
i.e. on (1834.63 - 1822.26) = 12.37
TOTAL
- 1822.26) = 12.49
Cost of one no
Say
15.3
9999
19.24.3
Code
15.2.2
Unit
Quantity
Rate
Amount
cum
0.25
997.05
249.26(A)
cum
L.S.
0.31
7.15
1454.55
1.73
450.91(A)
12.37
1834.63
0.12
1834.75
1.87
1836.62
1836.60
Rectangular arch type manhole 140x90 cm and 2.45 m deep

Description
Details of cost of a manhole 140x90 cm
and 2.45 m deep
40 mm nominal size)
2.16m x 1.66m x 0.20m = 0.72 cum
Dismantling of second class brick work in
sand)
Brick work in item 5.52mx0.23mx1.20m
= 1.524 cum
3.92mx0.23mx1.15m = 1.037 cum
= 2.561 cum
Deduct arch ring and portion of pipe
2xx3.14x0.25mx0.23x0.1m = 0.018 cum
2x3.14/4(0.15)x0.23m = 0.008 cum
= (-) 0.026 cum
Net qty = 2.561 - 0.026 = 2.535 cum
Say 2.54 cum
Brick work in arch
x3.14x1.13x0.80x0.23m = 0.327 cum
2xx3.14x0.25mx0.23x0.1m = 0.018 cum
= 0.345 cum Say 0.35 cum
Net qty = 2.54+0.35 = 2.89 cum
1456
Unit
Quantity
cum
0.72
Rate
615.15
Amount
442.91(A)
Code
Description
15.7.4

2x1.4x0.90/2x(0.20+0.30)/2 = 0.315 cum
Less pipe 1.4x3.14/4x(0.15) = (-) 0.025 cum
Net qty = 0.290 cum
1.36mx1.06mx0.15 = 0.216 cum
Less cover 3.14/4x(0.50)x0.15m
= (-) 0.029 cum
= 0.187 cum Say 0.19 cum
Removal of M.S foot rest
TOTAL
Add 1 % Water charges on all except
(A) i.e. on (3470.27 - 3443.96) = 26.31
TOTAL
- 3443.96) = 26.57
Cost of one no
Say
15.2.1
15.3
9999
9999
19.24.4
Code
15.2.1
Unit
Quantity
Rate
Amount
cum
2.89
842.75 2435.55(A)
cum
0.29
997.05
289.14(A)
cum
L.S.
L.S.
0.19
7.15
8.06
1454.55
1.73
1.73
276.36(A)
12.37
13.94
3470.27
0.26
3470.53
3.99
3474.52
3474.50
Circular manhole 122 cm diameter and 1.68 m deep

Description
Details of cost of a manhole 1.22 m internal
diameter 1.68 m deep
cement : 3 coarse sand : 6 aggregate stone
40 mm nominal size)
1.98x1.98x0.30 m = 1.178 cum Say 1.18 cum
SH : Dismantling
sand 8 )
Curved on plan
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
= 1.320
2xx3.14x0.25mx0.23x0.10 m = 0.018 cum
2x3.14/4x(0.15)x0.23 = 0.008 cum
= 0.026 cum
1457
Unit
Quantity
cum
1.18
Rate
Amount
997.05 1176.52(A)
Code
15.7.4
15.2.1
9999
9999
Description
Net quantity 1.320-0.026 = 1.294 Say
1.29 cum
Brick work in arches
2x1/2x3.14x0.25 m x0.230x0.10 m
= 0.018 cum Say 0.02 cum
Total = 1.294+0.02 = 1.1.314 cum
Say 1.131 cum
Dismantaling cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 gradeed stone
For benching :
3.14/4x(1.22)x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)
Total =0.043 cum
0.024 + 0.043 = 0.277 cum
Less pipe :1.22x3.14/4x(0.15)(-)
= 0.0216 cum
Net Qty. = 0.277 - 0.0216 = 0.26 cum
In cover fixing 0.7854x1.020x1.020x0.15 m
=0.123 cum
Less cover 3.14/4x(0.28) x 0.15 m : (-)
= 0.037 cum
= 0.086 cum Say 0.09 cum
Total = 0.26 + 0.09 = 0.35 cum
Removal of S.F.R.C cover with frame size
560 mm diameter (medium duty)
Removal of M.S. foot rests
TOTAL
i.e. on (2655.80 - 2629.49) = 26.31
TOTAL
= 26.57
Cost of one no
Say
Unit
Quantity
cum
1.31
842.75 1104.00(A)
cum
0.35
997.05
348.97(A)
L.S.
L.S.
7.15
8.06
1.73
1.73
12.37
13.94
2655.80
3.99
2660.05
2660.05
Extra for depth of manholes dismantled :
19.25.1
Rectangular manhole 90x80 cm and beyond 45 cm depth
15.7.4
Description
Unit
Quantity

cement mortar 1:5 (1 Cement : 5 fine sand)
4.32x0.23x1.0m = 0.994 cum Say 0.99 cum
cum
0.99
1458
Amount
0.26
2656.06
19.25
Code
Rate
Rate
842.75
Amount
834.32(A)
Code
Description
Unit
Quantity
9999
Removing of M.S. foot rests

TOTAL
i.e. on (837.47 - 834.32) = 3.15
TOTAL
= 3.18
Cost for one metre
Say
L.S.
1.82
19.25.2
Code
15.7.4
9999
19.25.3
Code
Rate
1.73
Amount
3.15
837.47
0.03
837.50
0.48
837.98
838.00
Rectangular manhole 120x90 cm and beyond 90 cm depth

Description
cement mortar 1:5 (1 Cement : 5 fine sand)
5.12x0.23x1.0m = 1.178 cum Say 1.18 cum
Removing of M.S. foot rests
TOTAL
i.e. on (997.60 - 994.45) = 3.15
TOTAL
- 994.45) = 3.18
Cost for one metre
Say
Unit
Quantity
cum
L.S.
1.18
1.82
Rate
842.75
1.73
Amount
994.45(A)
3.15
997.60
0.03
997.63
0.48
998.11
998.10
Rectangular arch type manhole 140x90 cm and beyond 2.45 m depth (up to
4.25 m depth)
Description
Unit
Details of cost of dismantling one manhole

4.25m deep
Dismantling IInd class brick work in cement
mortar 1:4 (1 Cement : 4 Coarse sand) for
2.45 depth
Qty for 2.45m depth
5.52mx0.23mx1.20m = 1.524 cum
3.92mx0.23mx1.15m = 1.037 cum
Total = 2.561 cum
2xx3.14x0.25mx0.23x0.1m = 0.018 cum
2x3.14/4(0.15)x0.23m = 0.008 cum
Total deduction= = (-) 0.026 cum
Net 2.561 - 0.026 = 2.535 cum Say 2.54 cum
Qty in arch
1459
Quantity
Rate
Amount
Code
15.7.4
15.2.1
19.25.4
Code
15.2.1
Description
x3.14x1.13x0.80x0.23m = 0.327 cum
2xx3.14x0.25mx0.23x0.1m = 0.018 cum
Totol for 4.45 m depth 2.54 + 0.35
= 2.89 cum
Qty for 4.25m depth
5.52mx0.23mx1.20m = 1.524 cum
3.92mx0.23mx2.95m = 2.660 cum
Total = 4.184 cum
2xx3.14x0.70mx0.23x0.1m = 0.051 cum
2x3.14/4x(0.60)x0.23 = 0.130 cum
Total deduction== (-) 0.181 cum
Net 4.184 - 0.181 = 4.003 cum Say 4.00 cum
Qty in arch
x3.14x1.13x0.80x0.23m = 0.327 cum
2xx3.14x0.70mx0.23x0.1m = 0.051 cum
Total for 2.25 m depth = 4.0+ 0.38 =4.38 cum
Net difference = 4.38 - 2.89 = 1.49 cum
Dismantling cement concrete 1:2:4 (1
Cement : 2 coarse sand : 4 graded stone
aggregate 40mm nominal size)
Qty for 4.25m depth
2x1.4x(0.90/2)x(0.65+0.75)/2 = 0.882 cum
Less pipe :1.4x3.14/4x(0.60)(-) = 0.396 cum
= 0.486 cum Say 0.49 cum
Qty for 2.45m depth
2x1.4x(0.90/2)x(0.20+0.30)/2 = 0.315 cum
Less pipe :1.4x3.14/4x(0.15)(-) = 0.025 cum
= 0.290 cum Say 0.29 cum
Net difference = 0.49 - 0.29 = 0.20 cum
Cost for 1.8 metre depth
Cost for 1 metre depth
Say
Unit
Quantity
Rate
Amount
cum
1.49
842.75 1255.70(A)
cum
0.20
997.05
199.41(A)
1455.11
808.39
808.40
Circular manhole 122 cm diameter and beyond 1.68 m depth (up to 2.29 m depth)
Description
Details o cost of dismantling one manhole
2.29m deep
Dismantling cement concrete 1:3:6 (1
Cement : 3 coarse sand : 6 graded stone
aggregate 40mm nominal size)
1.98x1.98x0.30 = 1.178 cum. Say 1.18 cum.
(Rate as per item No.15.2.1 of
SH. dismantling and Demolishing)
Dismantling IInd class brick work in cement
mortar 1:4 (1 Cement : 4 Coarse sand)
1460
Unit
Quantity
cum
1.18
Rate
Amount
997.05 1176.52(A)
Code
15.7.4
15.2.1
9999
9999
19.24.4
Description
Curved on plan
3.14x1.45x0.85x0.23 = 0.891
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
Total = 0.891 + 1.069 = 1.96 cum
2x1/2x3.14x0.25mx0.23x0.10 m = 0.018 cum
2x3.14/4x(0.15)x0.23 = 0.008 cum
Total deduction = 0.026 cum
Net quantity 1.96-0.026 = 1.934 Say
1.93 cum
Qty in arch
2x1/2x3.14x0.25 m x0.23x0.10 m
= 0.018 cum Say 0.02 cum
Total = 1.93 + 0.02 = 1.97 cum
Dismantling cemnet concrete 1:2:4 ( 1
aggregate 20 mm nominal size
For benching :
3.14/4x(1.22)x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)
=0.043 cum
= 0.277 cum
Less pipe :1.22x3.14/4x(0.15)(-) = 0.0216 cum
Net qty== 0.2554 cum Say 0.26 cum
For fixing cover : 3.14/4 x d2 x thickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28) x 0.15 m : (-)
= 0.037 cum
Total = 0.26 + 0.09 = 0.35 cum
SH : Dismantling
Removal of SFRC cover
Removal of M.S. foot rests
Deduct cost of dismantling manhole
1.68m deep
SH: DRAINAGE
TOTAL
i.e. on (552.03 - 525.66) = 26.37
TOTAL
- 525.66) = 26.63
Cost of manhole 0.61m depth
Cost per metre depth
Say
1461
Unit
Quantity
Rate
Amount
cum
1.97
842.75 1660.22(A)
cum
L.S.
L.S.
0.35
7.15
8.09
997.05
1.73
1.73
each
-1.00
348.97(A)
12.37
14.00
2660.05 -2660.05(A)
552.03
0.26
552.29
3.99
556.28
911.93
911.95
19.26
Raising manhole cover and frame slab to required level including dismantling
existing slab and making good the damage as required (Raising depth of manhole
to be paid separately) :
19.26.1
Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade

LD - 2.5
Code
15.3
9999
5.3
5.9.3
9999
19.26.2
Code
Description
Details of cost for one manhole
20 mm nominal size) = 1.36x1.26x0.15 =
0.257 cum
Less cover with frame portion
0.85x0.70x0.15 =(-) 0.089 cum
Net qty=0.168 cum Say 0.17 cum
Rate as per item no. 15.3 of
Removal of R.C.C cover and frame
Removal of R.C.C work 1:2:4 ( 1 cement :
For raised slab = 1.36x1.26x0.15
= 0.257 cum
Less portion cover with frame
= 0.85x0.70x0.15 =(-) 0.089 cum
Net qty = 0.168 cum Say 0.17 cum
Rate as per item no. 5.3 of SH : RCC work
Form work = 0.90x0.80 = 0.72 sqm
Less cover = 0.60x0.45 =(-) 0.27 sqm
Net qty = 0.45 sqm
Rate as per item no 5.9.3 of SH : RCC work
Sundries
TOTAL
i.e. on (1729.51 - 1693.75) = 35.76
TOTAL
- 1693.75) = 36.12
Cost of one no
Say
Unit
Quantity
Rate
cum
L.S.
0.17
7.15
1454.55
1.73
cum
0.17
7390.80 1256.44(A)
sqm
L.S.
0.45
13.52
422.30
1.73
Amount
247.27(A)
12.37
190.04(A)
23.39
1729.51
0.36
1729.87
5.42
1735.29
1735.30
Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10

Description
Unit

20 mm nominal size)
1.66x1.36x0.15 = 0.339 cum
Less for R.C.C cover with frame
3.14/4x(0.80)x0.15 =(-) 0.075 cum
Net qty 0.264 cum Say 0.26 cum
1462
Quantity
Rate
Amount
Code
Description
15.3

R.C.C work 1:2:4 ( 1 cement : 2 coarse
nominal size )
1.66x1.36x0.15 = 0.339 cum
= 3.14/4x0.80x0.80x0.15 =(-) 0.075 cum
Form work = 1.2x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50) =(-) 0.196 sqm
Net qty= 0.884 sqm Say .88 sqm
Sundries
TOTAL
i.e. on (2712.57 - 2671.41) = 41.16
TOTAL
- 2671.41) = 41.57
Cost of one no
Say
9999
5.3
5.9.3
9999
19.26.3
Code
15.3
9999
5.3
5.9.3
Unit
Quantity
Rate
Amount
cum
L.S.
0.26
7.15
1454.55
1.73
378.18(A)
12.37
cum
0.26
7390.80 1921.61(A)
sqm
L.S.
0.88
16.64
422.30
1.73
371.62(A)
28.79
2712.57
0.41
2712.98
6.24
2719.22
2719.20
Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20

Description
20 mm nominal size)
1.66x1.36x0.15 = 0.339 cum
Less for R.C.C cover with frame
3.14/4x(0.90)x0.15 =(-) 0.095 cum
Net qty 0.244 cum Say 0.24 cum
R.C.C work 1:2:4 ( 1 cement : 2 coarse
nominal size )
1.66x1.36x0.15 = 0.339 cum
= 3.14/4x0.90x0.90x0.15 =(-) 0.095 cum
Form work = 1.2x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56) =(-) 0.246 sqm
Net qty= 0.834 sqm Say .83 sqm
1463
Unit
Quantity
Rate
cum
L.S.
0.24
7.15
1454.55
1.73
cum
0.24
7390.80 1773.79(A)
sqm
0.83
422.30
Amount
349.09(A)
12.37
350.51(A)
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
i.e. on (2520.84 - 2473.39) = 47.45
TOTAL
- 2473.39) = 47.92
Cost of one no
Say
L.S.
20.28
19.26.4
Code
15.3
9999
4.2.3
9999
Rate
1.73
Amount
35.08
2520.84
0.47
2521.31
7.19
2528.50
2528.50
Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35
Description
Dismantling of C.C slab of 1:2:4 (1 cement
: 2 coarse sand : 4 aggregate stone 20 mm
nominal size)
= 3.14/4x(0.985)x0.15 = 0.114 cum
Less cover =3.14/4x(0.90)x0.15
=(-) 0.095 cum
C.C work 1:2:4 ( 1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal
size )
3.14/4x(0.985)x0.15 = 0.114 cum
= 3.14/4x(0.90)x0.15 =(-) 0.095 cum
Work
Sundries
TOTAL
i.e. on (209.06 - 160.04) = 49.02
TOTAL
= 49.51
Cost of one no
Say
1464
Unit
Quantity
Rate
Amount
cum
L.S.
0.02
8.06
1454.55
1.73
29.09(A)
13.94
cum
L.S.
0.02
20.28
6547.70
1.73
130.95(A)
35.08
209.06
0.49
209.55
7.43
216.98
217.00
19.27
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in

cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast
R.C.C. horizontal grating with frame complete as per standard design :
19.27.1
Code
4.1.11
6.1.1
13.9.1
4.2.3
5.9.2
7380
9977
9999
Description
MATERIAL
nominal size)
1.11mx1.06mx0.15 m= 0.176 cum Say
0.18 cum
SH : Concrete Work
Brick work in bricks of clas designation 75
in cement mortar 1:4 ( 1 cement : 4 coarse
sand)
2.82 m x 0.23m x0.45 m = 0.29 cum
12 mm cement plaster 1:3 ( 1 cement : 3
neat cement
Wall : 1.90x0.45 m = 0.855 sqm
Bed : 0.45x0.50 m = 0.225 sqm
Total= 1.080 sqm
mm nominal size)
2.82x0.23x0.15 m = 0.097 cum Say 0.10 cum
Form work
3.50x0.15 m = 0.525 sqm Say 0.53 sqm
Precast R.C.C. grating with frame
500x450 mm horizontal grating
Carriage of R.C.C. grating
Fixing R.C.C. grating
TOTAL
i.e. on (3934.64 - 3263.05) = 671.59
TOTAL
- 3263.05) = 678.31
Cost of one chamber
Say
1465
Unit
Quantity
Rate
Amount
cum
0.18
3959.70
712.75(A)
cum
0.29
4970.30
1441.39(A)
sqm
1.08
234.70
253.48(A)
cum
0.10
6547.70
654.77(A)
sqm
0.53
378.60
200.66(A)
each
L.S.
L.S.
1.00
7.15
5.33
650.00
1.73
1.73
650.00
12.37
9.22
3934.64
6.72
3941.36
101.75
4043.11
4043.10
19.28
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in

cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating
19.28.1
Code
4.1.11
6.1.1
13.9.1
4.2.3
5.3
0115
Description
nominal size)
1.06mx1.06mx0.15 m= 0.17 cum
SH : Concrete Work
sand)
2.72 m x 0.23m x0.70 m = 0.438 cum
Deduct opening 0.45x0.23x0.10 m
= 0.01 cum
Block 3x(0.075) = 0.001 cum
Total deduction = 0.011 cum
Net qty. = 0.438 (-) 0.011 = 0.427 cum
Say 0.43 cum
neat cement
Wall : 1.80x0.70 m = 1.26 sqm
Bed : 0.45x0.45 m = 0.202 sqm
Top : 0.45x0.20 m = 0.09 sqm
Sides : 2x0.20x0.10 m = 0.04 sqm
Total= 1.592 sqm
Deduct opening
0.45x0.10 m = 0.045 sqm
Net qty. = 1.592 (-) 0.045 = 1.547 cum
Say 1.55 cum
mm nominal size)
Block = 3x(0.75) = 0.001 cum
R.C.C. 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal
size)
0.91x0.91x0.075 m = 0.062 cum Say
0.06 cum
floor five level
Coolie
Form work
0.45x0.45 m = 0.202 sqm
0.45x0.20 m = 0.09 sqm
outside slab : 3.40x0.075 m = 0.255 sqm
1466
Unit
Quantity
Rate
Amount
cum
0.17
3959.70
673.15(A)
cum
0.43
4970.30
2137.23(A)
sqm
1.55
234.70
363.79(A)
cum
0.001
6547.70
6.55(A)
cum
0.06
7390.80
443.45(A)
day
-0.113
368.00
-41.58
Code
Description
Unit
Quantity
5.9.2

Mild steel reinforcement for R.C.C work
0.062 cum @ 80 kg/cum = 4.96 kg
SH : RCC work
450x100 mm vertical grating
Fixing and carriage of R.C.C. grating
TOTAL
i.e. on (4345.87 - 4106.69) = 239.18
TOTAL
- 4106.69) = 241.57
Cost of one chamber
Say
sqm
0.55
378.60
208.23(A)
kg
4.96
55.30
274.29(A)
each
L.S.
1.00
20.67
245.00
1.73
245.00
35.76
4345.87
5.22.1
7381
9999
Rate
Amount
2.39
4348.26
36.24
4384.50
4384.50
19.29
Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement
mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal
grating with frame and vertical grating complete as per standard design :
19.29.1
Code
4.1.11
6.1.1
13.9.1
Description
nominal size)
1.71mx1.11mx0.15 m = 0.285 cum Say
0.29 cum
SH : Concrete Work
sand)
1.91 m x 0.23m x0.45 m = 0.199 cum
2.20mx0.23mx0.70 m = 0.354 cum
Total= 0.553 cum
Deduct lintel portion
2x0.23x0.20x0.20 m = (-) 0.018 cum
Nte Qty= 0.0535 cum Say 0.54 cum
neat cement
Wall : 1.80x0.70 m = 1.26 sqm
Wall : 1.40x0.45 m = 0.63 sqm
Bed : 1.10x0.50 m = 0.55 sqm
Total= 2.44 sqm
Deduct 2x0.20x0.20 m = (-) 0.08 sqm
Net Qty= 2.36 sqm
1467
Unit
Quantity
Rate
Amount
cum
0.29
3959.70 1148.31(A)
cum
0.54
4970.30
2683.96(A)
sqm
2.36
234.70
553.89(A)
Code
4.2.3
5.3
0115
5.13
5.9.2
5.22.1
7380
9977
7381
9999
Description
mm nominal size)
Block = 1.92x0.23x0.15 = 0.07 cum
Work
R.C.C. 1:2:4 (1 cement : 2 coarse sand : 4
size)
0.88x0.96x0.075 m = 0.063 cum Say
0.06 cum
floor five level
Coolie
R.C.C. 1:2:4 (1 cement: 2 coarse sand : 4
size) in lintels 1x0.96x0.20x0.20 m
= 0.04 cum
Form work
Slab bottom 0.50x0.65 m = 0.325 sqm
Outer periphery 3.50x0.075 m = 0.263 sqm
2.20x0.15 m = 0.330 sqm
= 0.918 sqm Say 0.91 sqm
Mild steel reinforcement for R.C.C work
(0.06+0.04) = 0.10 cum @ 80 kg/cum
= 8.00 kg
500x450 mm horizontal grating
Carriage of R.C.C. grating
450x100 mm vertical grating
Labour for fixing precast R.C.C. grating
and frame
TOTAL
i.e. on (7372.80 - 6448.09) = 924.71
TOTAL
- 6448.09) = 933.96
Cost of one chamber
Say
1468
Unit
Quantity
Rate
Amount
cum
0.07
6547.70
458.34(A)
cum
0.06
7390.80
443.45(A)
day
-0.113
368.00
-41.58
cum
0.04
9330.20
373.21(A)
sqm
0.91
378.60
344.53(A)
kg
8.00
55.30
442.40(A)
each
L.S.
1.00
7.15
650.00
1.73
650.00
12.37
each
1.00
245.00
245.00(A)
L.S.
34.06
1.73
58.92
7372.80
9.25
7382.05
140.09
7522.14
7522.15
19.30
Constructing brick masonry chamber for underground C.I. inspection chamber and
bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with
frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame
to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top
slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand(Zone-III) : 10
graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with
cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of
neat cement on walls and bed concrete etc. complete as per standard design:
19.30.1
Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
19.30.1.1
Code
4.1.11
6.1.1
13.9.1
4.2.3
5.9.2
1354
9977
9999
Description
nominal size)
1.22mx1.065mx0.15 m= 0.195 cum
Say .20 cum
SH : Concrete Work
sand)
3.05 m x 0.23m x0.30 m = 0.210 cum
Less pipe
2x3.14/4x(0.10)x0.23 m = (-) 0.004 cum
Net Qty= 0.206 cum Say 0.21 cum
neat cement
Wall : 2.13x0.30 m = 0.639 sqm
Bed : 0.61x0.455 m = 0.278 sqm
Total= 0.917 sqm
Less pipe 2x3.14/4x(0.10) = (-) 0.016 sqm
Net Qty= 0.901 sqm Say 0.90 sqm
mm nominal size)
3.05x0.23x0.15 = 0.105 cum say 0.11 cum
SH : Concrete Work
Form work
Rectangular cover 455x610 mm with
frame (low duty)
Carriage of C.I.cover and frame
Painting of C.I. Cover and frame with
coal tar
1469
Unit
Quantity
Rate
Amount
cum
0.20
3959.70
791.94(A)
cum
0.21
4970.30
1043.76(A)
sqm
0.90
234.70
211.23(A)
cum
0.11
6547.70
720.25(A)
sqm
0.56
378.60
212.02(A)
each
L.S.
1.00
7.15
1500.00
1.73
1500.00
12.37
L.S.
7.15
1.73
12.37
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
i.e. on (4527.33 - 2979.20) = 1548.13
TOTAL
- 2979.20) = 1563.61
Cost of one chamber
Say
L.S.
13.52
Rate
1.73
Amount
23.39
4527.33
15.48
4542.81
234.54
4777.35
4777.35
19.30.2
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
19.30.2.1
Code
4.1.11
6.1.1
13.9.1
5.3
5.9.2
Description
nominal size)
1.31mx1.11mx0.15 m= 0.22 cum
SH : Concrete Work
in cement mortar 1:4 ( 1 cement : 4 fine
sand)
3.32 m x 0.23m x0.30 m = 0.229 cum
Less pipe
3x3.14x(0.10)x0.23 m = (-) 0.005 cum
neat cement
Wall : 2.40x0.30 m = 0.72 sqm
Bed : 0.70x0.50 m = 0.35 sqm
= 1.07 sqm
Less pipe 3x3.14/4x(0.10) = (-) 0.02 sqm
Net Qty= 1.05 sqm
R.C.C 1:2:4 ( 1 cement : 2 coarse sand : 4
size)
1.16x0.96x0.15 = 0.167 cum
Deduct cover
0.61x0.45x0.15 m = (-) 0.042 cum
floor five level
M.S.reinforcement for slab
0.13 cum @ 48.06 kg/cum = 6.25 kg
1470
Unit
Quantity
Rate
Amount
cum
0.22
3959.70
871.13(A)
cum
0.22
4970.30
1093.47(A)
sqm
1.05
234.70
246.44(A)
cum
0.13
7390.80
960.80(A)
sqm
0.67
378.60
253.66(A)
Code
Description
Unit
Quantity
0115
Coolie
Form work
Inside area of chamber : 0.70x0.50 m
= 0.35 sqm
= 0.95 sqm
Deduct cover : 0.61x0.455 m = (-) 0.278 sqm
= 0.672 sqm Say 0.67 sqm
frame (low duty)
Carriage of C.I. Cover and frame
Painting of C.I. Cover and frame with coal tar
Sundries
TOTAL
i.e. on (5230.94 - 3771.13) = 1459.81
TOTAL
- 3771.13) = 1474.41
Cost of one chamber
Say
day
-0.24
368.00
-88.32
kg
6.25
55.30
345.63(A)
1.00
7.15
7.15
13.52
1500.00
1.73
1.73
1.73
1500.00
12.37
12.37
23.39
5230.94
5.22.1
1354
9977
9999
9999
each
L.S.
L.S.
L.S.
Rate
Amount
14.60
5245.54
221.16
5466.70
5466.70
19.30.3
Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or
more inlets :
19.30.3.1
Code
4.1.11
6.1.1
Description
Details of cost of one chamber
nominal size)
1.46mx1.21mx0.15 m= 0.26 cum
SH : Concrete Work
sand)
3.82 m x 0.23m x0.30 m = 0.26 cum
Less pipe
5x3.14x(0.10)x0.23 m = (-) 0.009 cum
neat cement
Wall : 2.90x0.30 m = 0.87 sqm
Bed : 0.85x0.60 m = 0.51 sqm
Total= 1.38 sqm
Less pipe 5x3.14/4x(0.10) = (-) 0.04 sqm
Net Qty= 1.34 sqm
1471
Unit
Quantity
Rate
Amount
cum
0.26
3959.70 1029.52(A)
cum
0.26
4970.30
1292.28(A)
Code
Description
Unit
Quantity
13.9.1

R.C.C 1:2:4 ( 1 cement : 2 coarse sand : 4
size)
1.31x1.06x0.15 = 0.208 cum
Deduct cover
0.61x0.455x0.15 m = (-) 0.042 cum
floor five level
Coolie
Form work
Inside area of chamber : 0.85x0.60 m
= 0.511 sqm
Total= 1.186 sqm
Deduct cover : 0.61x0.455 m = (-) 0.278 sqm
Net Qty= 0.908 sqm Say 0.91 sqm
M.S.reinforcement for slab for 0.17 cum
@ 48.06 kg/cum
= 48.06x0.17cum = 8.17 kg
SH : RCC work
frame (low duty)
Carriage of C.I. Cover and frame
Painting of C.I. Cover and frame with
coal tar
Sundries
TOTAL
i.e. on (6119.44 - 4689.07) = 1430.37
TOTAL
- 4689.07) = 1444.67
Cost of one chamber
Say
sqm
1.34
cum
0.17
day
-0.32
368.00
-117.76
sqm
0.91
378.60
344.53(A)
kg
8.17
55.30
451.80(A)
each
L.S.
1.00
7.15
1500.00
1.73
1500.00
12.37
L.S.
L.S.
7.15
13.52
1.73
1.73
12.37
23.39
6119.44
5.3
0115
5.9.2
5.22.1
1354
9977
9999
9999
Rate
234.70
Amount
314.50(A)
7390.80 1256.44(A)
14.30
6133.74
216.70
6350.44
6350.45
19.31
Extra for depth beyond 45 cm of brick masonry chamber :
19.31.1
For 455x610 mm size
19.31.1.1
Code
Description
Unit

Brick work in bricks of clas designation 7.5
sand)
3.05 m x 0.23m x1.00 m = 0.70 cum
1472
Quantity
Rate
Amount
Code
Description
Unit
Quantity
6.1.1

coarse sand finished with floating coat of
neat cement
Wall : 2.13x1.00 m = 2.13 sqm
TOTAL
Cost per metre
Say
cum
0.70
4970.30
3479.21
sqm
2.13
234.70
499.91
3979.12
3979.12
3979.10
13.9.1
Rate
Amount
19.31.2
For 500x700 mm size
19.31.2.1
Code
6.1.1
13.9.1
Description
Brick work in bricks of clas designation
75 in cement mortar 1:5 ( 1 cement :
5 fine sand)
3.32 m x 0.23m x1.00 m = 0.76 cum
neat cement
Wall : 2.40x1.00 m = 2.40 sqm
TOTAL
Cost per metre
Say
Unit
Quantity
Rate
Amount
cum
0.76
4970.30
3777.43
sqm
2.40
234.70
563.28
4340.71
4340.71
4340.70
19.31.3
For 600x850 mm size
19.31.3.1
Code
6.1.1
13.9.1
Description
in cement mortar 1:4 ( 1 cement: 4 coarse
sand)
3.82 m x 0.23m x1.00 m = 0.88 cum
neat cement
Wall : 2.90x1.00 m = 2.90 sqm
TOTAL
Cost per metre
Say
1473
Unit
Quantity
Rate
Amount
cum
0.88
4970.30
4373.86
sqm
2.9
234.70
680.63
5054.49
5054.49
5054.50
19.32
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey
comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long
complete as per standard design.
19.32.1
Code
2.8.1
2.26.1
2602
0362
0285
0287
1854
2260
2201
9999
5.12
5.22.1
16.8.1
0123
0124
Description
Details of cost for one soak pit
Earth work in excavation including disposal
of surplus earth 3.14/4x(2.5)x3m = 14.73
cum
Rate as per item no. 2.26.1 of SH : Earth
work
= 3.14/4x(2.5) x 1.5 m = 7.37 cum
2nd class bricks
perimetre = 4x0.35 =1.40 m
Area = 1.40x2.925 m = 4.1 sqm
Number of brick = 4.1x487x0.066 = 131.78
Wastage 10% = 13.718
Total= 144.96 Say 145 numbers
Brick bats = 3.14/4x(1.2)x2.925m =3.33 cum
Deduct = 0.45x0.45x2.925 m = 0.59 cum
Net qty= 2.74 cum
Brick bats
Brick aggregate 50 to 80 mm nominal size
= 3.14x1.50x0.03x2.925 m = 4.13 cum
nominal size
Brick aggregate 40 mm nominal size
= 3.14x2.15x0.35x2.925 m =6.91 cum
nominal size
100 mm dia
Carriage of brick bats and aggregate
Carriage of Bricks
Single matting 2.5x2.5 m = 6.25 sqm
Precast R.C.C.slabs 7.5 cm thick in
cement concrete 1:2:4 (1 cement : 2
mm nominal size)
0.45x0.45x0.075 m = 0.02 cum
Rate as per item no 5.12 of SH : RCC
Reinforcement @ 80 kg/cum = 0.02x80
=1.6 kg
2nd class brick edging laid length wise with
half brick depth
3.14x2.6 m =8.17 m
Rate as per item no. 16.8.1 of SH : Road work
LABOUR
1474
Unit
Quantity
cum
14.73
166.40
2451.07(A)
cum
7.37
51.75
381.40(A)
1000 Nos
0.145
4500.00
652.50
cum
2.74
500.00
1370.00
cum
4.13
750.00
3097.50
cum
6.91
750.00
5182.50
each
3.00
50.00
150.00
13.78
0.145
112.14
112.79
276.72
1.73
1554.28
40.12
194.00
cum
0.02
6972.10
139.44(A)
kg
1.60
55.30
88.48(A)
metre
8.17
36.20
295.75(A)
day
day
0.50
0.50
487.00
448.00
243.50
224.00
cum
1000 Nos
L.S.
Rate
Amount
Code
Description
Unit
Quantity
0114
0115
Beldar
Coolie
TOTAL
i.e. on (18272.54 - 3356.14) = 14916.40
TOTAL
- 3356.14) = 15065.56
Cost of one soak pit
Say
day
day
3.00
3.00
19.33
Code
2.8.1
0362
2260
16.8.1
1854
9999
0114
9999
Rate
368.00
368.00
Amount
1104.00
1104.00
18272.54
149.16
18421.70
2259.83
20681.53
20681.55
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W.

drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
Description
Details of cost for one soak pit
Earth work in excavation including disposal
of surplus earth 1.2x1.2x1.2m = 1.73 cum
(Rate as per item no. 2.8.1 of
SH: Earth work)
Brick bats
1.2x1.2x1.2 = 1.73 cum
SH : Road work
Second class brick edging laid length wise
with half brick depth
100 mm dia
Sundries
LABOUR
For filling brick bats
Beldar
Sundries
TOTAL
i.e. on (1888.33 - 476.11) = 1412.22
TOTAL
- 476.11) = 1426.34
Cost of one soak pit
Say
1475
Unit
Quantity
Rate
Amount
cum
cum
1.73
1.73
166.40
500.00
287.87(A)
865.00
cum
1.73
112.79
195.13
metre
5.20
36.20
188.24(A)
each
L.S.
2.00
25.84
50.00
1.73
100.00
44.70
day
L.S.
0.50
13.52
368.00
1.73
184.00
23.39
1888.33
14.12
1902.45
213.95
2116.40
2116.40
19.34
Providing and fixing S.W. intercepting trap in manholes with stiff mixture of
cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc.
complete :
19.34.1
100 mm dia
Code
7128
9977
0367
2209
0983
2261
1881
0123
0124
0114
0101
19.34.2
Code
7129
9977
0367
2209
0983
2261
1881
0123
0124
0114
0101
Description
Unit

MATERIAL
S.W. intercepting trap 100 mm dia
Carriage of trap
Carriage of Cement
Fine sand (zone IV)
Spun yarn
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of one no.
Say
Quantity
Rate
Amount
each
L.S.
tonne
tonne
cum
1.00
1.04
0.0013
0.0013
0.001
190.00
1.73
5700.00
92.24
760.00
190.00
1.80
7.41
0.12
0.76
cum
kilogram
0.001
0.09
103.77
50.00
0.10
4.50
day
day
day
day
0.02
0.02
0.06
0.02
487.00
448.00
368.00
407.00
9.74
8.96
22.08
8.14
253.61
2.54
256.15
38.42
294.57
294.55
Unit
Quantity
150 mm dia
Description
MATERIAL
S.W. intercepting trap 150 mm dia
Carriage of trap
Carriage of Cement
Fine sand (zone IV)
Spun yarn
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Cost of one no.
Say
1476
Rate
Amount
each
L.S.
tonne
tonne
cum
1.00
2.08
0.0019
0.0019
0.0014
250.00
1.73
5700.00
92.24
760.00
250.00
3.60
10.83
0.18
1.06
cum
kilogram
0.0014
0.18
103.77
50.00
0.15
9.00
0.03
0.03
0.08
0.03
487.00
448.00
368.00
407.00
14.61
13.44
29.44
12.21
344.52
3.45
347.97
52.20
400.17
400.15
day
day
day
day
19.35
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes
including collars/spigot jointed with stiff mixture of cement mortar in the
proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc.
complete
19.35.1
450 mm dia RCC pipes.
Code
1728
2299
0367
2209
0983
2261
0123
0124
0114
0101
19.35.2
Code
1729
2303
0367
2209
0983
2261
0123
0124
0114
0101
Description
Unit
Detail for 10 metre

MATERIALS :
RCC pipe 450 mm dia NP-3 spigot
Carriage of R.C.C. pipes 450 & 500 mm dia
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Rate per metre
Say
Quantity
Rate
Amount
metre
100 metre
tonne
tonne
cum
10.00
0.10
0.012
0.012
0.017
1496.00
2520.19
5700.00
92.24
760.00
14960.00
252.02
68.40
1.11
12.92
cum
0.017
103.77
1.76
day
day
day
day
0.375
0.375
2.41
0.33
487.00
448.00
368.00
407.00
182.63
168.00
886.88
134.31
16668.03
166.68
16834.71
2525.21
19359.92
1935.99
1936.00
Unit
Quantity

Description
Detail for 10 metre
MATERIALS :
800 mm dia
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Rate per metre
Say
1477
Rate
Amount
metre
10.00
1995.00
19950.00
100 metre
tonne
tonne
cum
0.10
0.016
0.016
0.022
3780.28
5700.00
92.24
760.00
378.03
91.20
1.48
16.72
cum
0.022
103.77
2.28
day
day
day
day
0.46
0.46
1.83
0.33
487.00
448.00
368.00
407.00
224.02
206.08
673.44
134.31
21677.56
216.78
21894.34
3284.15
25178.49
2517.84
2517.85
19.35.3
Code
1730
2331
0367
2209
0983
2261
0123
0124
0114
0101
19.35.4
Code
1731
2332
0367
2209
0983
2261
0123
0124
0114
0101

Description
Unit
Detail for 10 metre

MATERIALS :
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Rate per metre
Say
Quantity
Rate
Amount
metre
100 metre
tonne
tonne
cum
10.00
0.10
0.025
0.025
0.033
3150.00
5670.42
5700.00
92.24
760.00
31500.00
567.04
142.50
2.31
25.08
cum
0.033
103.77
3.42
day
day
day
day
0.625
0.625
3.00
0.50
487.00
448.00
368.00
407.00
304.38
280.00
1104.00
203.50
34132.23
341.32
34473.55
5171.03
39644.58
3964.45
3964.45
1000 mm dia RCC pipes. (Laying by mannual/ machanical means)

Description
Unit
Detail for 10 metre

MATERIALS :
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Rate per metre
Say
1478
Quantity
Rate
Amount
metre
100 metre
tonne
tonne
cum
10.00
0.10
0.028
0.028
0.037
3885.00
7560.57
5700.00
92.24
760.00
38850.00
756.06
159.60
2.58
28.12
cum
0.037
103.77
3.84
day
day
day
day
0.68
0.68
4.33
0.50
487.00
448.00
368.00
407.00
331.16
304.64
1593.44
203.50
42232.94
422.33
42655.27
6398.29
49053.56
4905.35
4905.35
19.35.5
Code
1732
2334
0367
2209
0983
2261
0123
0124
0114
0101
19.35.6
Code
1733
2336
0367
2209
0983
2261
0123
0124
0114
0101

Description
Unit
Detail for 10 metre

MATERIALS :
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Rate per metre
Say
Quantity
Rate
Amount
metre
100 metre
tonne
tonne
cum
10.0
0.10
0.034
0.034
0.046
5040.00
7560.57
5700.00
92.24
760.00
50400.00
756.06
193.80
3.14
34.96
cum
0.046
103.77
4.77
day
day
day
day
0.795
0.795
8.67
0.67
487.00
448.00
368.00
407.00
387.17
356.16
3190.56
272.69
55599.31
555.99
56155.30
8423.30
64578.60
6457.86
6457.85
1800 mm dia RCC pipes. (Laying by mannual/ machenical means)

Description
Unit
Detail for 10 metre

MATERIALS :
Carriage of RCC pipe above 1200 mm dia
and upto 1800 mm dia
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Rate per metre
Say
1479
Quantity
Rate
Amount
metre
10.00
9450.00
94500.00
100 metre
tonne
tonne
cum
0.10
0.049
0.049
0.055
7560.57
5700.00
92.24
760.00
756.06
279.30
4.52
41.80
cum
0.055
103.77
5.71
day
day
day
day
1.15
1.15
13.00
1.00
487.00
448.00
368.00
407.00
560.05
515.20
4784.00
407.00
101853.64
1018.54
102872.18
15430.83
118303.01
11830.30
11830.30
19.36
Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes
including collars/spigot jointed with stiff mixture of cement mortar in the
proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc.
complete
19.36.1
Code
1734
2299
0367
2209
0983
2261
0123
0124
0114
0101
19.36.2
Code
1735
2303
0367
2209
0983
2261
0123
0124
0114
0101
Description
Unit
Detail for 10 metre

MATERIALS :
Carriage of R.C.C. pipes 450 &
500 mm dia
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Rate per metre
Say
Quantity
Rate
Amount
metre
10.0
1733.00
17330.00
100 metre
tonne
tonne
cum
0.10
0.012
0.012
0.017
2520.19
5700.00
92.24
760.00
252.02
68.40
1.11
12.92
cum
0.017
103.77
1.76
day
day
day
day
0.375
0.375
2.41
0.33
487.00
448.00
368.00
407.00
182.63
168.00
886.88
134.31
19038.03
190.38
19228.41
2884.26
22112.67
2211.26
2211.25
Unit
Quantity

Description
Detail for 10 metre
MATERIALS :
RCC pipe 600 mm dia pipe NP-4 spigot
800 mm dia
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Rate per metre
Say
1480
Rate
Amount
metre
10.0
2310.00
23100.00
100 metre
tonne
tonne
cum
0.10
0.016
0.016
0.022
3780.28
5700.00
92.24
760.00
378.03
91.20
1.48
16.72
cum
0.022
103.77
2.28
day
day
day
day
0.46
0.46
1.83
0.33
487.00
448.00
368.00
407.00
224.02
206.08
673.44
134.31
24827.56
248.28
25075.84
3761.38
28837.22
2883.72
2883.70
19.36.3
Code
1736
2331
0367
2209
0983
2261
0123
0124
0114
0101
19.36.4
Code
1737
2332
0367
2209
0983
2261
0123
0124
0114
0101

Description
Unit
Detail for 10 metre

MATERIALS :
R.C.C. pipes 900 mm dia
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Rate per metre
Say
Quantity
Rate
Amount
metre
100 metre
tonne
tonne
cum
10.0
0.10
0.025
0.025
0.033
4494.00
5670.42
5700.00
92.24
760.00
44940.00
567.04
142.50
2.31
25.08
cum
0.033
103.77
3.42
day
day
day
day
0.625
0.625
3.00
0.5
487.00
448.00
368.00
407.00
304.38
280.00
1104.00
203.50
47572.23
475.72
48047.95
7207.19
55255.14
5525.51
5525.50
1000 mm dia RCC pipes.(Laying by mannual/ machanical means)

Description
Unit
Detail for 10 metre

MATERIALS :
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Rate per metre
Say
1481
Quantity
Rate
Amount
metre
100 metre
tonne
tonne
cum
10.0
0.10
0.028
0.028
0.037
5565.00
7560.57
5700.00
92.24
760.00
55650.00
756.06
159.60
2.58
28.12
cum
0.037
103.77
3.84
day
day
day
day
0.68
0.68
4.33
0.5
487.00
448.00
368.00
407.00
331.16
304.64
1593.44
203.50
59032.94
590.33
59623.27
8943.49
68566.76
6856.67
6856.65
19.36.5
Code
1738
2334
0367
2209
0983
2261
0123
0124
0114
0101
19.36.6
Code
1739
2336
0367
2209
0983
2261
0123
0114
0101

Description
Unit
Detail for 10 metre

MATERIALS :
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Rate per metre
Say
Quantity
Rate
Amount
metre
100 metre
tonne
tonne
cum
10.0
0.10
0.034
0.034
0.046
6510.00
7560.57
5700.00
92.24
760.00
65100.00
756.06
193.80
3.14
34.96
cum
0.046
103.77
4.77
day
day
day
day
0.795
0.795
8.67
0.67
487.00
448.00
368.00
407.00
387.17
356.16
3190.56
272.69
70299.31
702.99
71002.30
10650.35
81652.65
8165.26
8165.25

Description
Unit
Detail for 10 metre

MATERIALS :
RCC pipe above 1200 mm dia and upto
1800 mm dia
Carriage of Cement
Fine sand (zone IV)
LABOUR
Beldar
Bhisti
TOTAL
TOTAL
Rate per metre
Say
1482
Quantity
Rate
Amount
metre
10.0
13650.00
136500.00
100 metre
tonne
tonne
cum
0.10
0.049
0.049
0.055
7560.57
5700.00
92.24
760.00
756.06
279.30
4.52
41.80
cum
0.055
103.77
5.71
day
day
day
1.15
13.00
1.00
487.00
368.00
407.00
560.05
4784.00
407.00
143338.44
1433.38
144771.82
21715.77
166487.59
16648.75
16648.75
SUB HEAD : 20.0
PILE WORK
1483
20.1
Providing, driving with hydraulic piling rigs with power units and installing
driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified
diameter and length below the pile cap, to carry safe working load not less
than specified, excluding the cost of steel reinforcement but including the
cost of shoe and the length of pile to be embedded in the pile cap etc. all
complete. (Length of pile for payment shall be measured from top of shoe to
the bottom of pile cap) :
20.1.1
400 mm dia piles
Code
5.33.1
9999
7181
7182
0024
0025
0130
0114
20.1.2
Code
5.33.1
9999
7181
7182
Description
Unit
Details of cost for 20 m length of pile

MATERIAL
Concrete -3.14/4x0.40x20 = 2.51 cum
Sundries
C.I. pile shoe of 80 kg per pile
@ 80 kg per pile
M.S. clamps for pile shoe of 35 kg per pile
@ 35 kg per pile
MACHINERY
Hire and running charges of hydraulic piling
rig with power unit etc. including complete
accessories and shifting at site.
Hire and running charges of light crane.
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (35822.02 - 16180.59) = 19641.43
TOTAL
- 16180.59) = 19837.84
Cost of 20 metre pile
Say
Quantity
Rate
Amount
cum
L.S.
kilogram
2.51
521.08
80.00
6446.45 16180.59(A)
1.73
901.47
50.00
4000.00
kilogram
35.00
45.00
1575.00
day
day
0.36
0.06
34000.00
2500.00
12240.00
150.00
day
day
0.08
2.00
487.00
368.00
38.96
736.00
35822.02
196.41
36018.43
2975.68
38994.11
1949.70
1949.70
450 mm dia piles

Description
Unit

MATERIAL
Concrete -3.14/4x0.45x20 = 3.18 cum
Sundries
@ 80 kg per pile
@ 35 kg per pile
SUB HEAD : 20- PILE WORK
1485
Quantity
cum
L.S.
kilogram
3.18
392.70
80.00
kilogram
35.00
Rate
Amount
6446.45 20499.71(A)
1.73
679.37
50.00
4000.00
45.00
1575.00
Code
0024
0025
0130
0114
20.1.3
Code
5.33.1
9999
7181
7182
0024
0025
0130
0114
Description
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (43999.04 - 20499.71) = 23499.33
TOTAL
- 20499.71) = 23734.32
Say
Unit
Quantity
Rate
Amount
day
day
0.48
0.06
34000.00
2500.00
16320.00
150.00
day
day
0.08
2.00
487.00
368.00
38.96
736.00
43999.04
234.99
44234.03
3560.15
47794.18
2389.70
2389.70
500 mm dia piles

Description
Unit

MATERIAL
Concrete 3.14/4x0.50x20 = 3.925 cum
Sundries
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (53119.18 - 25302.32) = 27816.86
TOTAL
- 25302.32) = 28095.03
Say
1486
Quantity
Rate
Amount
cum
L.S.
kilogram
3.925
530.00
80.00
6446.45 25302.32(A)
1.73
916.90
50.00
4000.00
kilogram
35.00
45.00
1575.00
day
day
0.60
0.06
34000.00
2500.00
20400.00
150.00
day
day
0.08
2.00
487.00
368.00
38.96
736.00
53119.18
278.17
53397.35
4214.25
57611.60
2880.58
2880.60
20.1.4
Code
5.33.1
9999
7181
7182
0024
0025
0130
0114
20.1.5
Code
5.33.1
9999
7181
7182
0024
0025
0130
550 mm dia piles

Description
Unit

MATERIAL
Concrete 3.14/4x0.55x20 = 4.75 cum
Sundries
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (58163.95 - 30620.64) = 27543.31
TOTAL
- 30620.64) = 27818.74
Say
Quantity
Rate
Amount
cum
L.S.
kilogram
4.75
371.88
80.00
6446.45 30620.64(A)
1.73
643.35
50.00
4000.00
kilogram
35.00
45.00
1575.00
day
day
0.60
0.06
34000.00
2500.00
20400.00
150.00
day
day
0.08
2.00
487.00
368.00
38.96
736.00
58163.95
275.43
58439.38
4172.81
62612.19
3130.60
3130.60
750 mm dia piles

Description
Unit

MATERIAL
Concrete 3.14/4x0.75x15 = 6.62 cum
Sundries
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
Mistry
1487
Quantity
Rate
Amount
cum
L.S.
kilogram
6.62
573.57
80.00
6446.45 42675.50(A)
1.73
992.28
50.00
4000.00
kilogram
35.00
45.00
1575.00
day
day
0.70
0.06
34000.00
2500.00
23800.00
150.00
day
0.14
487.00
68.18
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
i.e. on (74548.96 - 42675.50) = 31873.46
TOTAL
on all except (A) i.e. on (74867.69 42675.50) = 32192.19
Say
day
3.50
20.1.6
Code
5.33.1
9999
7181
7182
0024
0025
0130
0114
20.1.7
Code
5.33.1
Rate
368.00
Amount
1288.00
74548.96
318.73
74867.69
4828.83
79696.52
5313.10
5313.10
1000 mm dia piles

Description
Unit

MATERIAL
Concrete 3.14/4x1.00x10 = 7.85 cum
Sundries
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (82552.90 - 50604.63) = 31948.27
TOTAL
- 50604.63) = 32267.75
Say
Quantity
Rate
Amount
cum
L.S.
kilogram
7.85
897.89
80.00
6446.45 50604.63(A)
1.73
1553.35
50.00
4000.00
kilogram
35.00
45.00
1575.00
day
day
0.68
0.06
34000.00
2500.00
23120.00
150.00
day
day
0.16
4.00
487.00
368.00
77.92
1472.00
82552.90
319.48
82872.38
4840.16
87712.54
8771.25
8771.25
1200 mm dia piles

Description
Unit
Quantity

MATERIAL
Concrete 3.14/4x1.2x10 = 10.17 cum
cum
10.17
1488
Rate
Amount
6446.45 65560.40(A)
Code
Description
9999
7181
Sundries
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (97077.79 - 65560.40) = 31517.39
TOTAL
- 65560.40) = 31832.56
Say
7182
0024
0025
0130
0114
20.1.8
Code
5.33.1
9999
7181
7182
0024
0025
0130
Unit
Quantity
Rate
Amount
L.S.
kilogram
733.37
80.00
1.73
50.00
1268.73
4000.00
kilogram
35.00
45.00
1575.00
day
day
0.67
0.06
34000.00
2500.00
22780.00
150.00
day
day
0.18
4.50
487.00
368.00
87.66
1656.00
97077.79
315.17
97392.96
4774.88
102167.84
11351.98
11352.00
1500 mm dia piles

Description
MATERIAL
Concrete 3.14/4x1.5x9 = 15.90 cum
Sundries
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
LABOUR
Work supervisor
Mistry
1489
Unit
Quantity
Rate
Amount
cum
L.S.
kilogram
15.90
1113.48
80.00
kilogram
35.00
45.00
1575.00
day
day
0.77
0.10
34000.00
2500.00
26180.00
250.00
day
0.20
487.00
97.40
6446.45 102498.56(A)
1.73
1926.32
50.00
4000.00
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
i.e. on (138367.28 - 102498.56) = 35868.72
TOTAL
- 102498.56) = 36227.41
Say
day
5.00
20.2
Rate
368.00
Amount
1840.00
138367.28
358.69
138725.97
5434.11
144160.08
16017.78
16017.80
Boring, providing and installation bored cast-in-situ reinforced cement

concrete piles of grade M-25 of specified diameter and length below the pile
cap, to carry a safe working load not less than specified, excluding the cost of
steel reinforcement but including the cost of boring with bentonite solution
and temporary casing of appropriate length for setting out and removal of
same and the length of the pile to be embedded in the pile cap etc. by
percussion drilling using Direct mud circulation (DMC) or Bailer and chisel
technique by tripod and mechanical Winch Machine all complete, including
removal of excavated earth with all its lifts and leads (length of pile for payment
shall be measured up to bottom of pile cap).
Note: Truck Mounted rotary/TMR/Tubewell boring machine shall not be used .
20.2.1
Code
5.33.1
7183
9999
0015
0025
0026
0018
0017
0130
450 mm dia piles

Description
Unit

MATERIAL
Concrete 3.14/4x0.45x20 = 3.18 cum
Bentonite
Sundries
MACHINERY
Hire and running charges of Tripod and
Mechanical Winch machine complete with
power unit and accessories
Hire and running charges of bentonite pump.
Hire and running charges of loader
LABOUR
Work supervisor
Mistry
1490
cum
tonne
L.S.
Quantity
3.18
0.25
230.69
Rate
Amount
6446.45 20499.71(A)
3100.00
775.00
1.73
399.09
day
day
day
day
day
0.94
0.06
0.38
0.30
0.30
2000.00
2500.00
4200.00
6000.00
1800.00
1880.00
150.00
1596.00
1800.00
540.00
day
0.12
487.00
58.44
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
i.e. on (28618.24 - 20499.71) = 8118.53
TOTAL
- 20499.71) = 8199.72
Say
day
2.50
20.2.2
Code
5.33.1
7183
9999
0015
0025
0026
0017
0018
0130
0114
20.2.3
Code
5.33.1
Rate
368.00
Amount
920.00
28618.24
81.19
28699.43
1229.96
29929.39
1496.46
1496.45
500 mm dia piles

Description
Unit

MATERIAL
Concrete 3.14/4x0.50x20 = 3.925cum
Bentonite
Sundries
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (33786.91 - 25302.32) = 8484.59
TOTAL
- 25302.32) = 8569.44
Say
Quantity
Rate
Amount
cum
tonne
L.S.
3.925
0.28
87.95
6446.45 25302.32(A)
3100.00
868.00
1.73
152.15
day
day
day
day
day
1.20
0.06
0.38
0.30
0.30
2000.00
2500.00
4200.00
1800.00
6000.00
2400.00
150.00
1596.00
540.00
1800.00
day
day
0.12
2.50
487.00
368.00
58.44
920.00
33786.91
84.85
33871.76
1285.42
35157.18
1757.85
1757.85
600 mm dia piles

Description
Unit
Quantity

MATERIAL
Concrete 3.14/4x0.60x20 = 5.65 cum
cum
5.65
1491
Rate
Amount
6446.45 36422.44(A)
Code
Description
7183
9999
Bentonite
Sundries
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (46243.03 - 36422.44) = 9820.59
TOTAL
- 36422.44) = 9918.80
Say
0015
0025
0026
0017
0018
0130
0114
20.2.4
Code
5.33.1
7183
9999
0015
0025
0026
0017
0018
0130
0114
Unit
Quantity
Rate
0.33
317.43
3100.00
1.73
1023.00
549.15
day
day
day
day
day
1.50
0.06
0.38
0.30
0.30
2000.00
2500.00
4200.00
1800.00
6000.00
3000.00
150.00
1596.00
540.00
1800.00
day
day
0.12
3.00
487.00
368.00
58.44
1104.00
46243.03
tonne
L.S.
Amount
98.21
46341.24
1487.82
47829.06
2391.45
2391.45
750 mm dia piles

Description
Unit

MATERIAL
Concrete 3.14/4x0.75x15 = 6.62 cum
Bentonite
Sundries
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (53629.31 - 42675.50) = 10953.81
TOTAL
- 42675.50) = 11063.35
Say
1492
cum
tonne
L.S.
Quantity
6.62
0.30
131.58
Rate
Amount
6446.45 42675.50(A)
3100.00
930.00
1.73
227.63
day
day
day
day
day
1.40
0.06
0.75
0.30
0.30
2000.00
2500.00
4200.00
1800.00
6000.00
2800.00
150.00
3150.00
540.00
1800.00
day
day
0.14
3.50
487.00
368.00
68.18
1288.00
53629.31
109.54
53738.85
1659.50
55398.35
3693.22
3693.20
20.2A
Boring, providing and installation bored cast-in-situ reinforced cement

concrete piles of garde M-25 of specified diameter and length below pile cap,
to carry a safe working load not less than specified, excluding the cost of
steel reinforcement but including the cost of boring with bentonite solution
and temporary casing of appropriate length for setting out and removal of
same and the length of the pile to be embedded in the pile cap etc. by Crawler
mounted, telescopic boom hydraulic pilling Rig all complete, including removal
of excavated earth with all its lifts and leads (length of pile for payment shall
be measured up to bottom of pile cap).
Note: Truck Mounted rotary/TMR/Tube well boring machine shall not be used.
20.2A.1
Code
5.33.1
7183
9999
0024
0025
0026
0018
0017
0130
0114
20.2A.2
Code
5.33.1
7183
9999
600 mm dia piles

Description
Unit

MATERIAL
Concrete 3.14/4x0.60x20 = 5.65 cum
Bentonite
Sundries
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (68743.03 - 36422.44) = 32320.59
TOTAL
- 36422.44) = 32643.80
Say
cum
tonne
L.S.
Quantity
5.65
0.33
317.43
Rate
Amount
6446.45 36422.44(A)
3100.00
1023.00
1.73
549.15
day
day
day
day
day
0.75
0.06
0.38
0.30
0.30
34000.00
2500.00
4200.00
6000.00
1800.00
25500.00
150.00
1596.00
1800.00
540.00
day
day
0.12
3.00
487.00
368.00
58.44
1104.00
68743.03
323.21
69066.24
4896.57
73962.81
3698.14
3698.15
750 mm dia piles

Description
Unit

MATERIAL
Concrete 3.14/4x0.75x15 = 6.62 cum
Bentonite
Sundries
cum
tonne
L.S.
1493
Quantity
6.62
0.30
131.58
Rate
Amount
6446.45 42675.50(A)
3100.00
930.00
1.73
227.63
Code
0024
0025
0026
0018
0017
0130
0114
20.2A.3
Code
5.33.1
7183
9999
0024
0025
0026
0018
0017
0130
0114
Description
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (74629.31 - 42675.50) = 31953.81
TOTAL
Say
Unit
Quantity
Rate
Amount
day
day
day
day
day
0.70
0.06
0.75
0.30
0.30
34000.00
2500.00
4200.00
6000.00
1800.00
23800.00
150.00
3150.00
1800.00
540.00
day
day
0.14
3.50
487.00
368.00
68.18
1288.00
74629.31
319.54
74948.85
4841.00
79789.85
5319.32
5319.30
1000 mm dia piles

Description
Unit

MATERIAL
Concrete 3.14/4x1.00x10 = 7.85 cum
Bentonite
Sundries
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (83423.84 - 50604.63) = 32819.21
TOTAL
Say
1494
cum
tonne
L.S.
Quantity
7.85
0.35
175.89
Rate
Amount
6446.45 50604.63(A)
3100.00
1085.00
1.73
304.29
day
day
day
day
day
0.69
0.06
0.75
0.40
0.40
34000.00
2500.00
4200.00
6000.00
1800.00
23460.00
150.00
3150.00
2400.00
720.00
day
day
0.16
4.00
487.00
368.00
77.92
1472.00
83423.84
328.19
83752.03
4972.11
88724.14
8872.41
8872.40
20.2A.4
Code
5.33.1
7183
9999
0024
0025
0026
0018
0017
0130
0114
20.2A.5
Code
5.33.1
7183
9999
0024
0025
0026
0018
0017
0130
1200 mm dia piles

Description
Unit

MATERIAL
Concrete 3.14/4x1.20x9 = 10.17 cum
Bentonite
Sundries
MACHINERY
Hire and running charges of loader.
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (98980.63 - 65560.40) = 33420.23
TOTAL
- 65560.40) = 33754.43
Say
cum
tonne
L.S.
Quantity
10.17
0.385
290.79
Rate
Amount
6446.45 65560.40(A)
3100.00
1193.50
1.73
503.07
day
day
day
day
day
0.67
0.06
0.75
0.50
0.50
34000.00
2500.00
4200.00
6000.00
1800.00
22780.00
150.00
3150.00
3000.00
900.00
day
day
0.18
4.50
487.00
368.00
87.66
1656.00
98980.63
334.20
99314.83
5063.16
104377.99
11597.55
11597.55
1500 mm dia piles

Description
Unit

MATERIAL
Concrete 3.14/4x1.50x9 = 15.90 cum
Bentonite
Sundries
MACHINERY
LABOUR
Work supervisor
Mistry
1495
cum
tonne
L.S.
Quantity
15.90
0.45
593.48
Rate
Amount
6446.45 102498.56(A)
3100.00
1395.00
1.73
1026.72
day
day
day
day
day
0.77
0.10
0.96
0.75
0.75
34000.00
2500.00
4200.00
6000.00
1800.00
26180.00
250.00
4032.00
4500.00
1350.00
day
0.25
487.00
121.75
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
i.e. on (143194.03 - 102498.56) = 40695.47
TOTAL
Say
day
5.00
Rate
368.00
Amount
1840.00
143194.03
406.95
143600.98
6165.36
149766.34
16640.70
16640.70
20.3
Boring with hydraulic piling rigs with power units, providing and installing
cast in situ single under reamed piles of specified diameter and length below
pile cap in M-25 cement concrete, to carry a safe working load not less than
specified, excluding the cost of steel reinforcement but including the cost of
boring with bentonite solution and the length of the pile to be embedded in
pile cap etc. all complete. (Length of pile for payment shall be measured upto
to the bottom of pile cap) :
20.3.1
300 mm dia piles
Code
5.33.1
7183
9999
0024
0025
0026
0130
0114
Description
Unit

MATERIAL
R.C.C
Stem -3.14/4x(0.30)x9.625 = 0.680 cum
Bulb -3.14/4x(0.75)x0.075 = 0.033 cum
2x 3.14/4x(0.525)x0.150 = 0.065 cum
=0.778 cum
Bentonite
Sundries
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (19148.19 - 5015.34) = 14132.85
TOTAL
Say
1496
Rate
Amount
0.778
0.08
410.92
6446.45
3100.00
1.73
5015.34(A)
248.00
710.89
day
day
day
0.36
0.03
0.02
34000.00
2500.00
4200.00
12240.00
75.00
84.00
day
day
0.08
2.00
487.00
368.00
38.96
736.00
19148.19
cum
tonne
L.S.
Quantity
141.33
19289.52
2141.13
21430.65
2143.06
2143.05
20.3.2
Code
5.33.1
7183
9999
0024
0025
0026
0130
0114
20.3.3
Code
5.33.1
7183
9999
0024
0025
0026
400 mm dia piles

Description
Unit

MATERIAL
R.C.C
Stem -3.14/4x(0.40)x9.30 = 1.169 cum
Bulb -3.14/4x(1.00)x0.1 = 0.079 cum
2x 3.14/4x(0.7)x0.30 = 0.23 cum
= 1.478 cum
Bentonite
Sundries
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (23720.71 - 9527.85) = 14192.86
TOTAL
Say
Rate
Amount
1.478
0.15
276.82
6446.45
3100.00
1.73
9527.85(A)
465.00
478.90
day
day
day
0.36
0.06
0.02
34000.00
2500.00
4200.00
12240.00
150.00
84.00
day
day
0.08
2.00
487.00
368.00
38.96
736.00
23720.71
cum
tonne
L.S.
Quantity
141.93
23862.64
2150.22
26012.86
2601.28
2601.30
450 mm dia piles

Description
Unit

MATERIAL
R.C.C
Stem -3.14/4x(0.45)x9.212 = 1.465 cum
Bulb -3.14/4x(1.125)x0.113 = 0.112 cum
2x 3.14/4x(0.788)x0.337 = 0.329 cum
= 1.906 cum
Bentonite
Sundries
MACHINERY
1497
cum
tonne
L.S.
day
day
day
Quantity
1.906
0.19
194.81
0.36
0.06
0.02
Rate
Amount
6446.45 12286.93(A)
3100.00
589.00
1.73
337.02
34000.00
2500.00
4200.00
12240.00
150.00
84.00
Code
0130
0114
20.3.4
Code
5.33.1
7183
9999
0024
0025
0026
0130
0114
Description
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (26461.91 - 12286.93) = 14174.98
TOTAL
Say
Unit
Quantity
day
day
0.08
2.00
Rate
487.00
368.00
Amount
38.96
736.00
26461.91
141.75
26603.66
2147.51
28751.17
2875.11
2875.10
550 mm dia piles

Description
Unit

MATERIAL
R.C.C
Stem -3.14/4x(0.50)x9.125 = 1.792 cum
Bulb -3.14/4x(1.25)x0.125 = 0.153 cum
2x 3.14/4x(0.875)x0.375 = 0.451 cum
= 2.396 cum
Bentonite
Sundries
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (29700.54 - 15471.48) = 14229.06
TOTAL
Say
1498
cum
tonne
L.S.
Quantity
2.40
0.20
208.15
Rate
Amount
6446.45 15471.48(A)
3100.00
620.00
1.73
360.10
day
day
day
0.36
0.06
0.02
34000.00
2500.00
4200.00
12240.00
150.00
84.00
day
day
0.08
2.00
487.00
368.00
38.96
736.00
29700.54
142.29
29842.83
2155.70
31998.53
3199.85
3199.85
20.4
Extra over single under ream for providing additional bulbs in under reamed
piles, under specified diameter(only the nos. of extra bulbs are to be paid)
20.4.1
300 mm dia piles
Code
5.33.1
7183
0024
0025
0026
42.00
0130
0114
20.4.2
Code
5.33.1
7183
0024
0025
0026
0130
Description
Unit
Details of cost for 1 bulb.

MATERIAL
Bulb - 0.033 cum
Bentonite
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
Total
i.e. on (1346.77 - 212.73) = 1134.04
Total
- 212.73) = 1145.38
Cost of 1 bulb
Say
Quantity
Rate
Amount
cum
tonne
0.033
0.003
6446.45
3100.00
212.73(A)
9.30
day
day
0.02
0.01
day
34000.00
2500.00
0.01
680.00
25.00
4200.00
day
day
0.02
1.00
487.00
368.00
9.74
368.00
1346.77
11.34
1358.11
171.81
1529.92
1529.90
400 mm dia piles

Description
Unit

MATERIAL
Bulb - 0.063 cum
Bentonite
MACHINERY
LABOUR
Work supervisor
Mistry
1499
Quantity
Rate
Amount
cum
tonne
0.063
0.006
6446.45
3100.00
406.13
18.60
day
day
day
0.02
0.01
0.01
34000.00
2500.00
4200.00
680.00
25.00
42.00
day
0.02
487.00
9.74
Code
Description
Unit
Quantity
0114
Beldar
Total
i.e. on (1549.47 - 406.13) = 1143.34
Total
= 1154.77
Cost of 1 bulb
Say
day
1.00
20.4.3
Code
5.33.1
7183
0024
0025
0026
0130
0114
20.4.4
Code
5.33.1
7183
0024
Rate
368.00
Amount
368.00
1549.47
11.43
1560.90
173.22
1734.12
1734.10
450 mm dia piles

Description
Unit

MATERIAL
Bulb - 0.081 cum
Bentonite
MACHINERY
LABOUR
Work supervisor
Mistry
Beldar
Total
i.e. on (1671.70 - 522.16) = 1149.54
Total
= 1161.04
Cost of 1 bulb
Say
Quantity
Rate
Amount
cum
tonne
0.081
0.008
6446.45
3100.00
522.16(A)
24.80
day
day
day
0.02
0.01
0.01
34000.00
2500.00
4200.00
680.00
25.00
42.00
day
day
0.02
1.00
487.00
368.00
9.74
368.00
1671.70
11.50
1683.20
174.16
1857.36
1857.35
550 mm dia piles

Description
Unit

MATERIAL
Bulb - 0.102 cum
Bentonite
MACHINERY
1500
Quantity
Rate
Amount
cum
tonne
0.102
0.01
6446.45
3100.00
657.54(A)
31.00
day
0.02
34000.00
680.00
Code
Description
Unit
Quantity
0025
0026

LABOUR
Work supervisor
Mistry
Beldar
Total
i.e. on (1855.28 - 657.54) = 1197.74
Total
= 1209.72
Cost of 1 bulb
Say
day
day
0.01
0.02
2500.00
4200.00
25.00
84.00
day
day
0.02
1.00
487.00
368.00
9.74
368.00
1855.28
0130
0114
Rate
Amount
11.98
1867.26
181.46
2048.72
2048.70
20.5
Providing, driving with vibrating pile driving hammer complete with power
units & accessories and installing driven Pre-cast reinforced cement concrete
piles of specified diameter and length below the pile cap in M-25 cement
concrete to carry safe working load not less than specified. With a central
through preformed hole with M.S. black pipe of dia, 40 mm for grouting with
cement sand grouting of mix 1:2 (1cement : 2 coarse sand) under sufficient
positive pressure to ensure complete filling including centring, shuttering,
driving and removing the steel casing pipe and lifting casing etc. complete
but excluding the cost of steel reinforcement. (Length of pile for payment shall
be measured from top of the shoe to the bottom of pile cap).
20.5.1
400 mm dia piles
Code
5.33.1
5.19
5.1.3
3.7
9999
7181
7182
0027
0028
Description
MATERIAL
Concrete -3.14/4x(0.40)x20 = 2.51 cum
Add
Rate as per item no 5.19 of SH : RCC
Deduct Rate as per item no 5.1.3 SH : RCC
Cement mortar 1:2 for grout
Sundries
@ 80 kg per pile
@35 kg per pile
MACHINERY
Hire and running charges of vibrating pile
driving hammer complete with power unit
and accessories .
Hire and running charges of crane
20 tonne capacity.
1501
Unit
Quantity
cum
2.51
cum
cum
2.51
-2.51
Rate
6446.45
Amount
16180.59(A)
9534.25 23930.97(A)
5772.65 -14489.35(A)
cum
L.S.
kilogram
0.025
442.00
80.00
5551.75
1.73
50.00
138.79
764.66
4000.00
kilogram
35.00
45.00
1575.00
day
0.38
35000.00
13300.00
day
0.06
9300.00
558.00
Code
0130
0114
20.5.2
Code
5.33.1
5.19
5.1.3
3.7
9999
7181
7182
0027
0028
0130
0114
Description
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (47121.10 - 25622.21) = 21498.89
TOTAL
Say
Unit
Quantity
day
day
0.12
3.00
Rate
487.00
368.00
Amount
58.44
1104.00
47121.10
214.99
47336.09
3257.08
50593.17
2529.65
2529.65
450 mm dia piles

Description
MATERIAL
Concrete -3.14/4x(0.45)x20 = 3.18 cum
Add Rate as per item no 5.19 SH : RCC
Wooden block @ 1 block per two piles
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
and accessories .
Hire and running charges of crane 20 tonne
capacity.
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (57291.05 - 32461.60) = 24829.45
TOTAL
- 32461.60) = 25077.74
Say
1502
Unit
Quantity
cum
cum
cum
3.18
3.18
-3.18
Rate
Amount
6446.45 20499.71(A)
9534.25 30318.92(A)
5772.65 -18357.03(A)
cum
L.S.
kilogram
0.025
442.00
80.00
5551.75
1.73
50.00
138.79
764.66
4000.00
kilogram
35.00
45.00
1575.00
day
0.38
35000.00
13300.00
day
0.06
9300.00
558.00
day
day
1.08
10.78
487.00
368.00
525.96
3967.04
57291.05
248.29
57539.34
3761.66
61301.00
3065.05
3065.05
20.5.3
Code
5.33.1
5.19
5.1.3
3.7
9999
7181
7182
0027
0028
0130
0114
20.5.4
Code
5.33.1
5.19
5.1.3
3.7
9999
7181
7182
500 mm dia piles

Description
MATERIAL
Concrete -3.14/4x(0.50)x20 = 3.925 cum
@ 80 kg per pile
M.S. clamps for pile shoe
@ 35 kg per pile
MACHINERY
and accessories .
capacity.
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (61565.49 - 40066.60) = 21498.89
TOTAL
- 40066.60) = 21713.88
Say
Unit
Quantity
Rate
Amount
cum
cum
cum
3.925
3.925
-3.925
cum
L.S.
kilogram
0.025
442.00
80.00
5551.75
1.73
50.00
138.79
764.66
4000.00
kilogram
35.00
45.00
1575.00
day
0.38
35000.00
13300.00
day
0.06
9300.00
558.00
day
day
0.12
3.00
487.00
368.00
58.44
1104.00
61565.49
6446.45 25302.32(A)
9534.25 37421.93(A)
5772.65 -22657.65(A)
214.99
61780.48
3257.08
65037.56
3251.87
3251.85
550 mm dia piles

Description
Unit

MATERIAL
Concrete -3.14/4x(0.55)x20 = 4.75 cum
@ 80 kg per pile
M.S. clamps for pile shoe
@ 35 kg per pile
1503
Quantity
cum
cum
cum
cum
L.S.
kilogram
4.75
4.75
-4.75
0.025
442.00
80.00
kilogram
35.00
Rate
Amount
6446.45 30620.64(A)
9534.25 45287.69(A)
5772.65 -27420.09(A)
5551.75
138.79
1.73
764.66
50.00
4000.00
45.00
1575.00
Code
0027
0028
0130
0114
20.5.5
Code
5.33.1
5.19
5.1.3
3.7
9999
7181
7182
0027
0028
0130
Description
MACHINERY
and accessories .
capacity.
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (69987.13 - 48488.24) = 21498.89
TOTAL
- 48488.24) = 21713.88
Say
Unit
Quantity
Rate
Amount
day
0.38
35000.00
13300.00
day
0.06
9300.00
558.00
day
day
0.12
3.00
487.00
368.00
58.44
1104.00
69987.13
214.99
70202.12
3257.08
73459.20
3672.96
3672.95
750 mm dia piles

Description
Unit

MATERIAL
Concrete -3.14/4x(0.75)x20 = 10.88 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
and accessories .
capacity.
LABOUR
Work supervisor
Mistry
1504
Quantity
Rate
Amount
cum
cum
cum
cum
L.S.
kilogram
10.88
10.88
-10.88
0.025
442.00
80.00
6446.45 70137.38(A)
9534.25 103732.64(A)
5772.65 -62806.43(A)
5551.75
138.79
1.73
764.66
50.00
4000.00
kilogram
35.00
45.00
1575.00
day
0.38
35000.00
13300.00
day
0.06
9300.00
558.00
day
0.12
487.00
58.44
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
i.e. on (132562.48 - 111063.59) = 21498.89
TOTAL
- 111063.59) = 21713.88
Say
day
3.00
20.5.6
Code
5.33.1
5.19
5.1.3
3.7
9999
7181
7182
0027
0028
0130
0114
Rate
Amount
368.00
1104.00
132562.48
214.99
132777.47
3257.08
136034.55
6801.72
6801.70
1000 mm dia piles

Description
Unit

MATERIAL
Concrete -3.14/4x(1.00)x20 = 15.70 cum
@ 80 kg per pile
@ 35 kg per pile
MACHINERY
and accessories .
capacity.
LABOUR
Work supervisor
Mistry
Beldar
TOTAL
i.e. on (181765.28 - 160266.39) = 21498.89
TOTAL
- 160266.39) = 21713.88
Say
1505
Quantity
Rate
Amount
cum
cum
cum
cum
L.S.
kilogram
15.7
15.7
-15.7
0.025
442.00
80.00
6446.45 101209.27(A)
9534.25 149687.73(A)
5772.65 -90630.61(A)
5551.75
138.79
1.73
764.66
50.00
4000.00
kilogram
35.00
45.00
1575.00
day
0.38
35000.00
13300.00
day
0.06
9300.00
558.00
day
day
0.12
3.00
487.00
368.00
58.44
1104.00
181765.28
214.99
181980.27
3257.08
185237.35
9261.86
9261.85
20.6
Vertical load testing of piles in accordance with IS 2911 (Part IV) including
installation of loading platform by Kentledge/Anchor piles method and
preparation of pile head or construction of test cap and dismantling of test
cap after test etc. complete as per specification & the direction of Engineer incharge.
20.6.1
Single pile upto 50 tonne Safe capacity
20.6.1.1
Initial test (Test Load 2.5 times the Safe capacity)
Code
7246
20.6.1.2
Code
7249
Description
Unit
Details of cost for 1 test

Verticle load testing (INITIAL) of piles in
accordance with IS : 2911 (Part-IV)
including installation of loading platform
and prepration of pile head or construction
of test cap and dismantling of test cap after
test etc. complete as per specification and
upto 50MT capacity pile.
of pile head or construction of test cap and
dismantling of test cap after test etc.
complete as per specification and upto
50MT capacity pile.
TOTAL
TOTAL
Cost per test
Say
Quantity
per test
1.00
Rate
33200.00
Routine test (Test Load 1.5 times the Safe capacity)

Description
Unit

Cyclic verticle load testing of piles in
including prepration of pile head etc. for
Single pile upto 50 tonne capacity
TOTAL
TOTAL
Cost per test
Say
Quantity
per test
1.00
Rate
15000.00
Single pile above 50 tonne and upto 100 tonne Safe capacity
20.6.2.1
7247
33200.00
33200.00
332.00
33532.00
5029.80
38561.80
38561.80
20.6.2
Code
Amount
Description
Unit

1506
Quantity
Rate
Amount
15000.00
15000.00
150.00
15150.00
2272.50
17422.50
17422.50
Amount
Code
Description
test etc. complete as per specification &
above 50MT and upto 100MT.
and preparation of pile head or construction
above 50 tonne and up to 100 tonne
TOTAL
TOTAL
Cost per test
Say
20.6.2.2
Code
7250
20.6.3
20.6.3.1
Code
7248
Unit
Quantity
per test
1.00
Rate
40300.00
Amount
40300.00
40300.00
403.00
40703.00
6105.45
46808.45
46808.45

Description
Unit

Single pile above 50 tonne capacity pile
and upto 100 tonne capacity pile
TOTAL
TOTAL
Cost per test
Say
Quantity
per test
1.00
Rate
23000.00
Amount
23000.00
23000.00
230.00
23230.00
3484.50
26714.50
26714.50
Group of two or more piles upto 50 tonne Safe capacity

Description
Unit

group of two or more upto 50MT.
and preparation of pile head or construction
1507
per test
Quantity
1.00
Rate
48500.00
Amount
48500.00
Code
Description
Unit
Quantity
Rate

group of two or more up to 50 tonne
TOTAL
TOTAL
Cost per test
Say
20.6.3.2
Code
7251
Amount
48500.00
485.00
48985.00
7347.75
56332.75
56332.75

Description
Unit

Group of two piles upto 50 tonne capacity
each
TOTAL
TOTAL
Cost per test
Say
per test
Quantity
1.00
Rate
29500.00
Amount
29500.00
29500.00
295.00
29795.00
4469.25
34264.25
34264.25
20.7
Cyclic vertical load testing of pile in accordance with IS Code of practice IS:
2911 (part IV) by Kentledge method including preparation of pile head etc for.
20.7.1
Single pile
20.7.1.1
Upto 50 tonne Safe capacity pile
Code
7249
Description
Unit

Single pile upto 50 tonne capacity
TOTAL
TOTAL
Cost per test
Say
1508
per test
Quantity
1.00
Rate
15000.00
Amount
15000.00
15000.00
150.00
15150.00
2272.50
17422.50
17422.50
20.7.1.2
Code
7250
Above 50 tonne and upto 100 tonne Safe capacity pile

Description
Unit

Single pile above 50 tonne capacity pile
and upto 100 tonne capacity pile
TOTAL
TOTAL
Cost per test
Say
per test
20.7.2
Group of two or more piles
20.7.2.1
Upto 400 tonne Safe capacity of group
Code
7251
Description
Unit

Group of two piles upto 50 tonne capacity
each
TOTAL
TOTAL
Cost per test
Say
per test
Quantity
1.00
Quantity
1.00
Rate
23000.00
Rate
29500.00
Amount
23000.00
23000.00
230.00
23230.00
3484.50
26714.50
26714.50
Amount
29500.00
29500.00
295.00
29795.00
4469.25
34264.25
34264.25
20.8
Lateral load testing of single pile in accordance with IS Code of practice IS :

2911 (Part IV) for determining safe allowable lateral load on pile :
20.8.1
Upto 50 tonne capacity pile
Code
7252
Description
Unit

Lateral load testing of single pile in
accordance with IS : 2911 part -IV for
determining safe allowable lateral load on
pile. Upto 50 tonne capacity
TOTAL
TOTAL
Cost per test
Say
1509
per test
Quantity
1.00
Rate
15000.00
Amount
15000.00
15000.00
150.00
15150.00
2272.50
17422.50
17422.50
20.8.2
Code
7253
20.9
Code
0081
0160
0161
9999
9977
Above 50 tonne and upto 100 tonne capacity pile

Description
Unit

Lateral load testing of single pile in
accordance with IS : 2911 part -IV for
determining safe allowable lateral load on
pile. Above 50 tonne capacity
TOTAL
TOTAL
Cost per test
Say
per test
Quantity
1.00
Rate
23600.00
Amount
23600.00
23600.00
236.00
23836.00
3575.40
27411.40
27411.40
Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo
Test method in accordance with IS 14893 including surface preparation of pile
top by removing soil, mud, dust & chipping lean concrete lumps etc. and use
of computerised equipment and high skill trained personal for conducting the
test & submission of results, all complete as per direction of Engineer-incharge.
Description
Detail of cost for one pit test (Ten pits in
one day)
MATERIAL
Pile Integrity testing equipment
LABOUR
Technician
Helper (Technician)
Miscllaneous
Reporting charges
Transportation and consumables etc.
TOTAL
TOTAL
Cost per test
Say
1510
Unit
Quantity
Rate
Amount
day
0.10
3000.00
300.00
day
day
0.10
0.10
775.00
368.00
77.50
36.80
L.S.
L.S.
100.67
33.56
1.73
1.73
174.16
58.06
646.52
6.47
652.99
97.95
750.94
750.95
SUB HEAD : 21.0
ALUMINIUM WORK
1511
21.1
Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and IS:
1285, fixing with dash fasteners of required dia and size, including necessary
filling up the gaps at junctions, i.e. at top, bottom and sides with required
EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust
free, straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /
stainless steel screws, all complete as per architectural drawings and the
directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be
paid for separately) :
21.1.1
For fixed portion
21.1.1.1
Anodised aluminium (anodised transparent or dyed to required shade according

to IS: 1868, Minimum anodic coating of grade AC 15)
Code
7306
0589
7389
9977
0116
0139
0114
0100
Description
Unit
Details of cost for 40.02 kg

MATERIAL
(i) External member of the frame (Jindal
section no 4605)
V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
(ii) Internal member of the frame (Jindal
section no 4604)
V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
(iii) Aluminium snap beading on both side
(Jindal section no 4407)
2x6x2 (1.14+0.95) = 50.16 m
Snap beading = 50.16 m @ 0.176 kg/m
= 8.33 kg
(iv) Angle cleat 38x38x4.8 mm 50 mm long
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Total = 42.02 kg
(v) C.P. brass /stainless steel screws 20 mm
for cleat angle 18x4 = 72 Nos
(vi)
Anodising 15 microns on aluminium sections
(vii)
LABOUR
For fabrication of frame
Fitter (grade 1)
Beldar
Bandhani
SUB HEAD : 21- ALUMINIUM WORK
1513
Quantity
Rate
Amount
kilogram
42.02
200.00
8404.00
100 Nos
0.72
170.00
122.40
kilogram
42.02
40.00
1680.80
L.S.
52.00
1.73
89.96
day
day
day
day
2.00
1.00
1.00
0.05
487.00
407.00
368.00
407.00
974.00
407.00
368.00
20.35
Code
Description
9999
Labour for drilling holes, hire charges of drill,

electricity charges, carriage of dash hold
fastners and sundries
TOTAL
TOTAL
Cost for 40.02 kg
Cost for 1 kg
Say
21.1.1.2
Code
7306
0589
7392
9977
0116
0139
0114
0100
Unit
Quantity
L.S.
100.00
Rate
1.73
Amount
173.00
12239.51
122.40
12361.91
1854.29
14216.20
355.22
355.20
Powder coated aluminium (minimum thickness of powder coating 50 micron)

Description
Unit

MATERIAL
(i) External member of the frame
V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
(ii) Internal member of the frame
V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
2x6x2 (1.14+0.95) = 50.16 m
= 8.33 kg
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Total = 42.02 kg
(vi) Epoxy
Powder coating 50 microns on aluminium
sections
(vii)
LABOUR
Fitter (grade 1)
Beldar
Bandhani
1514
Quantity
Rate
Amount
kilogram
42.02
200.00
8404.00
100 Nos
0.72
170.00
122.40
kilogram
42.02
64.00
2689.28
L.S.
52.00
1.73
89.96
day
day
day
day
2.00
1.00
1.00
0.05
487.00
407.00
368.00
407.00
974.00
407.00
368.00
20.35
Code
Description
9999

TOTAL
TOTAL
Cost for 40.02 kg
Cost for 1 kg
Say
21.1.1.3
Code
7306
0589
7393
9977
0116
0139
0114
0100
Unit
Quantity
L.S.
100.00
Rate
1.73
Amount
173.00
13247.99
132.48
13380.47
2007.07
15387.54
384.49
384.50
Polyester powder coated aluminium (minimum thickness of polyester powder

coating 50 micron)
Description
Unit

MATERIAL
V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
(ii) Internal member of the frame
V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
2x6x2 (1.14+0.95) = 50.16 m
= 8.33 kg
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
Total = 42.02 kg
(vi)
Polyester powder coating 50 microns on
aluminium sections
(vii)
LABOUR
Fitter (grade 1)
Beldar
Bandhani
1515
Quantity
Rate
Amount
kilogram
42.02
200.00
8404.00
100 Nos
0.72
170.00
122.40
kilogram
42.02
70.00
2941.40
L.S.
52.00
1.73
89.96
day
day
day
day
2.00
1.00
1.00
0.05
487.00
407.00
368.00
407.00
974.00
407.00
368.00
20.35
Code
Description
9999

TOTAL
TOTAL
Cost for 40.02 kg
Cost for 1 kg
Say
Unit
Quantity
L.S.
100.00
Rate
1.73
Amount
173.00
13500.11
135.00
13635.11
2045.27
15680.38
391.81
391.80
21.1.2
For shutters of doors, windows & ventilators including providing and fixing
hinges/ pivots and making provision for fixing of fittings wherever required
including the cost of EPDM rubber / neoprene gasket required (Fittings shall
be paid for separately)
21.1.2.1
Anodised aluminium (anodised transparent or dyed to required shade according

to IS: 1868, Minimum anodic coating of grade AC 15)
Code
7306
0689
Description
Unit

MATERIAL
(i) Hanging style (Jindal section no 4524)
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
(ii) Meeting style (Jindal section no 4526)
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
(iii) Top & bottom rail (Jindal section no 4510)
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
(iv) Lock rail (Jindal section no 4524)
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
(v) Glazing plate (Jindal section no 440)
on one side of lock rail
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
(vi) Aluminium snap beading (Jindal section
no 4497) on both side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
(vii) Aluminium angle cleat 38x38x4.8 mm
35 mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Sub total = 20.62 kg
Total = 21.65 kg
(viii)
Anodised Aluminium butt hinges 100x75x4 mm
(ix) C.P. brass /stainless steel screws
20 mm
For cleat 12x4 = 48
For cleat 4x8 = 32
For glazing plate @ 15 cm centre to centre
in 75 cm length 2x6 = 12
Total = 92 Nos
1516
kilogram
10 Nos
Quantity
Rate
Amount
21.65
200.00
4330.00
0.40
400.00
160.00
Code
Description
0589

(x)
(xi)
(xii) Neoprene/ EPDM gasket in groove of
meeting style
Neoprene/EPDM rubber gasket
LABOUR
For fabrication
Fitter (grade 1)
Beldar
Bandhani
For fixing the shutter including hinges :
Carpenter 1st class
Beldar
Labour for making provision for fittings and
carriage of screws etc. including sundries
TOTAL
TOTAL
Cost for 20.21 kg
Cost for 1 kg
Say
7389
9977
7390
0116
0139
0114
0100
0111
0114
9999
21.1.2.2
Code
Unit
Quantity
Rate
Amount
100 Nos
0.92
170.00
156.40
kilogram
21.65
40.00
866.00
L.S.
31.20
1.73
53.98
metre
2.35
20.00
47.00
day
day
day
day
1.00
1.00
0.50
0.40
487.00
407.00
368.00
407.00
487.00
407.00
184.00
162.80
day
day
0.20
0.50
487.00
368.00
97.40
184.00
L.S.
50.00
1.73
86.50
7222.08
72.22
7294.30
1094.15
8388.45
415.06
415.05
Powder coated aluminium (minimum thickness of powder coating 50 micron)

Description
Unit

MATERIAL
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
(vi) Aluminium snap beading (Jindal section
no 4497) on both side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
35 mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Total = 21.65 kg
1517
Quantity
Rate
Amount
Code
Description
7306
(viii)
Anodised Aluminium butt hinges
100x75x4 mm
(ix) C.P. brass /stainless steel screws
20 mm
For cleat 12x4 = 48
For cleat 4x8 = 32
Total = 92 Nos
(x) Epoxy
sections
(xi)
(xii) Neoprene/ EPDM rubber gasket in
groove of meeting style
LABOUR
Fitter (grade 1)
Beldar
Bandhani
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost for 20.21 kg
Cost for 1 kg
Say
0689
0589
7392
9977
7390
0116
0139
0114
0100
0111
0114
9999
21.1.2.3
Code
Unit
Quantity
Rate
Amount
kilogram
21.65
200.00
4330.00
10 Nos
0.40
400.00
160.00
100 Nos
0.92
170.00
156.40
kilogram
21.65
64.00
1385.60
L.S.
31.20
1.73
53.98
metre
2.35
20.00
47.00
day
day
day
day
1.00
1.00
0.50
0.40
487.00
407.00
368.00
407.00
487.00
407.00
184.00
162.80
day
day
0.20
0.50
487.00
368.00
97.40
184.00
L.S.
50.00
1.73
86.50
7741.68
77.42
7819.10
1172.87
8991.97
444.92
444.90
Polyester powder coated aluminium (minimum thickness of polyester powder

coating 50 micron)
Description
Unit

MATERIAL
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
1518
Quantity
Rate
Amount
Code
7306
0689
0589
7393
9977
7390
0116
0139
0114
0100
0111
0114
9999
Description
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
(vi) Aluminium snap beading (Jindal
section no 4497) on both side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
35 mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Total = 21.65 kg
(viii)
Anodised Aluminium butt hinges
100x75x4 mm
(ix) C.P. brass /stainless steel screws 20 mm
For cleat 12x4 = 48
For cleat 4x8 = 32
Total = 92 Nos
(x)
aluminium sections
(xi)
(xii) Neoprene/ EPDM rubber gasket in
groove of meeting style
LABOUR
For fabrication
Fitter (grade 1)
Beldar
Bandhani
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost for 20.21 kg
Cost for 1 kg
Say
1519
Unit
Quantity
Rate
Amount
kilogram
21.65
200.00
4330.00
10 Nos
0.40
400.00
160.00
100 Nos
0.92
170.00
156.40
kilogram
21.65
70.00
1515.50
L.S.
31.20
1.73
53.98
metre
2.35
20.00
47.00
day
day
day
day
1.00
1.00
0.50
0.40
487.00
407.00
368.00
407.00
487.00
407.00
184.00
162.80
day
day
0.20
0.50
487.00
368.00
97.40
184.00
L.S.
50.00
1.73
86.50
7871.58
78.72
7950.30
1192.55
9142.85
452.39
452.40
21.2
Providing and fixing 12 mm thick prelaminated particle board flat pressed three
layer or graded wood particle board conforming to IS: 12823 Grade l Type ll,
in panelling fixed in aluminum doors, windows shutters and partition frames
with C.P. brass / stainless steel screws etc. complete as per architectural
drawings and directions of engineer-in-charge.
21.2.1
Pre-laminated particle board with decorative lamination on one side and

balancing lamination on other side
Code
7477
9977
9999
0112
0114
21.2.2
Code
7480
9977
9999
0112
Description
Unit
Quantity
Rate
Amount

MATERIAL
12 mm thick particle board = 7.00 sqm
Add 5% wastage = 0.35 sqm
Total = 7.35 sqm
Prelaminated particle board with one side
decorative and other side balancing
lamination, flat pressed 3 layer & graded
(medium density) Grade I, Type II
conforming to IS : 12823 (exterior grade)
12 mm thick
Carriage of particle board
Sundries & screws etc.
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost for 7 sqm
Cost for 1 sqm
Say
sqm
L.S.
L.S.
7.35
13.65
27.30
563.00
1.73
1.73
4138.05
23.61
47.23
day
day
0.90
1.00
448.00
368.00
403.20
368.00
4980.09
49.80
5029.89
754.48
5784.37
826.33
826.35
Pre-laminated particle board with decorative lamination on both sides

Description
MATERIAL
12 mm thick particle board = 7.00 sqm
Add 5% wastage = 0.35 sqm
Total = 7.35 sqm
Prelaminated particle board with both sides
decorative lamination, flat pressed 3 layer
& graded (medium density) Grade I, Type II
conforming to IS : 12823 (exterior grade)
12 mm thick
Carriage of particle board
Sundries & screws etc.
LABOUR
Carpenter 2nd class
1520
Unit
Quantity
Rate
Amount
sqm
L.S.
L.S.
7.35
13.65
27.30
596.00
1.73
1.73
4380.60
23.61
47.23
day
0.90
448.00
403.20
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost for 7 sqm
Cost for 1 sqm
Say
day
1.00
Rate
368.00
Amount
368.00
5222.64
52.23
5274.87
791.23
6066.10
866.58
866.60
21.3
Providing and fixing glazing in aluminium door, window, ventilator shutters

and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per
the architectural drawings and the directions of engineer-in-charge . (Cost of
aluminium snap beading shall be paid in basic item):
21.3.1
With float glass panes of 4.0 mm thickness
Code
2406
9977
7390
0112
0114
9988
21.3.2
Code
2407
9977
7390
Description
Unit

MATERIAL
Float Glass panes 4.0 mm thick = 1.00 sqm
Add for wastage & breakage @ 10%
= 0.10 sqm
Total =1.10 sqm
Carriage of glass
LABOUR
Carpenter 2nd class
Beldar
Sundries and carriage of gasket
TOTAL
TOTAL
Cost for 1 sqm
Say
Quantity
Rate
Amount
sqm
L.S.
metre
1.10
2.42
6.00
286.00
1.73
20.00
314.60
4.19
120.00
day
day
L.S.
0.23
0.23
6.89
448.00
368.00
1.73
103.04
84.64
11.92
638.39
6.38
644.77
96.72
741.49
741.50
With float glass panes of 5.50 mm thickness

Description
Unit

MATERIAL
Glass panes 5.50 mm thick = 1.00 sqm
= 0.10 sqm
Total =1.00 sqm
Carriage of glass
sqm
L.S.
metre
1521
Quantity
1.10
3.33
6.00
Rate
490.00
1.73
20.00
Amount
539.00
5.76
120.00
Code
0112
0114
9988
21.3.3
Code
2408
9977
7390
0112
0114
9988
Description
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost for 1 sqm
Say
Unit
Quantity
day
day
L.S.
0.23
0.23
6.89
Rate
448.00
368.00
1.73
Amount
103.04
84.64
11.92
864.36
8.64
873.00
130.95
1003.95
1003.95
With float glass panes of 8 mm thickness

Description
Unit

MATERIAL
Float Glass panes 8.0 mm thick = 1.00 sqm
= 0.10 sqm
Total =1.10 sqm
8 mm.(weight not less than 20.00 kg/sqm).
Carriage of glass
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost for 1 sqm
Say
Quantity
Rate
Amount
sqm
L.S.
metre
1.10
4.84
6.00
605.00
1.73
20.00
665.50
8.37
120.00
day
day
L.S.
0.23
0.23
6.89
448.00
368.00
1.73
103.04
84.64
11.92
993.47
9.93
1003.40
150.51
1153.91
1153.90
21.4
Providing and fixing double action hydraulic floor spring of approved brand
and manufacture conforming to IS : 6315, having brand logo embossed on the
body / plate with double spring mechanism and door weight upto 125 kg, for
doors, including cost of cutting floors, embedding in floors as required and
making good the same matching to the existing floor finishing and cover plates
with brass pivot and single piece M.S. sheet outer box with slide plate etc.
complete as per the direction of Engineer-in-charge.
21.4.1
With stainless steel cover plate minimum 1.25 mm thickness
Code
7394
Description
Unit
Quantity
Details of cost for one number

MATERIAL
Double action hydraulic floor spring with
stainless steel cover plate
each
1.00
1522
Rate
1550.00
Amount
1550.00
Code
Description
Unit
Quantity
9977
9999
CARRIAGE
Sundries and screws
SH : concrete work
LABOUR
Carpenter 2nd class
Beldar
TOTAL
i.e. on (1770.27 - 10.96) = 1759.31
TOTAL
Cost for each
Say
L.S.
L.S.
13.00
26.00
1.73
1.73
22.49
44.98
cum
0.002
5481.95
10.96(A)
day
day
day
day
0.08
0.08
0.01
0.17
487.00
448.00
448.00
368.00
38.96
35.84
4.48
62.56
1770.27
4.1.3
0123
0124
0112
0114
21.4.2
Code
7396
9977
9999
4.1.3
0123
0124
0112
0114
Rate
Amount
17.59
1787.86
266.54
2054.40
2054.40
With brass cover plate minimum 1.25 mm thickness

Description
Details of cost for one number
MATERIAL
Double action hydraulic floor spring with
brass cover plate
CARRIAGE
Sundries and screws
work
LABOUR
For cutting hole and making it good
Carpenter 2nd class
Beldar
TOTAL
i.e. on (1920.27 - 10.96) = 1909.31
TOTAL
= 1928.40
Cost for each
Say
1523
Unit
Quantity
Rate
Amount
each
L.S.
L.S.
1.00
13.00
26.00
1700.00
1.73
1.73
1700.00
22.49
44.98
cum
0.002
5481.95
10.96(A)
day
day
day
day
0.08
0.08
0.01
0.17
487.00
448.00
448.00
368.00
38.96
35.84
4.48
62.56
1920.27
19.09
1939.36
289.26
2228.62
2228.60
21.5
Code
7306
0589
7048
7392
9977
Providing and fixing powder coated aluminium work (minimum thickness of

powder coating 50 micron) consisting of tee/ angle sections, of approved make
conforming to IS : 733 in frames of false ceiling including aluminium angle
cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium
perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre
to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia.
with necessary cadmium plated machine screws all complete as per approved
architectural drawings and direction of the Engineer-in-charge (level adjusting
hangers, ceiling cleats and expansion hold fasteners to be paid for separately).
Description
Unit
Details of cost for 6.35 kg (2.40x2.40

= 5.76 sqm)
MATERIAL
(i) Aluminium main runner - assuming Tee
of size 35x23.5x1.5 mm @ 600 mm centre
to centre
3x2.40 m = 7.20 m
Extra for light fittings
2x1.20 m = 2.40 m
Total= 9.60 m @ 0.247 kg/m = 2.370 kg
Aluminium cross runner - assuming Tee of
size 35x23.5x1.5 mm @ 600 mm centre to
centre
3x4x0.60 m = 7.20 m
(-) 2x0.30 = (-) 0.60 m
Total=6.60 m @ 0.247 kg/m = 1.630 kg
Perimeter angle aluminium - assuming size
25.4x25.4x1.63 mm @ 600 mm centre to
centre
4x2.40 m = 9.60 m @ 0.213 kg/m = 2.045 kg
(ii) CLEATS
Aluminium angle- assuming size
25.4x25.4x1.63 mm
Extra for light fittings =3x2x2 = 12.00
Corner
= 4.00
For joining runners = 42.00
Total = 58.00x0.025 = 1.45 m @
0.213 kg/m = 0.309 kg
Sub total = 2.370 + 1.630 + 2.045 +
0.309 =6.354 kg
(iii) C.P. brass/ stainless steel screws
20 mm for angle cleats
(iv) Rawl plug for fixing perimeter angles
Epoxy
sections
(vi)
(vii)
1524
Quantity
Rate
Amount
kilogram
6.67
200.00
1334.40
100 Nos
0.0116
170.00
1.97
each
24.00
10.00
240.00
kilogram
6.67
64.00
426.88
L.S.
13.00
1.73
22.49
Code
Description
9999
C.P. brass screws for fixing frame with

suspenders
LABOUR
For fabrication and erection
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost for 6.35 kg
Cost for 1 kg
Say
0111
0114
9999
21.6
Code
7395
0992
7388
9977
0111
0114
Unit
Quantity
Rate
Amount
L.S.
13.00
1.73
22.49
day
day
L.S.
0.64
0.64
13.00
487.00
368.00
1.73
311.68
235.52
22.49
2617.92
26.18
2644.10
396.62
3040.72
478.85
478.85
Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm
length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat
40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5
mm dia and 50 mm long, complete as per direction of Engineer-in-charge.
Description
Details of cost for 23 nos (hangers in
2.40 mx 2.40 m = 5.76 sqm)one number
MATERIAL
6 mm dia G.I. adjustable hangers including
clips (upto 1.20 metre length).
For light fitting 2x4 = 8.00
For runners = 15.00
total = 23.00
6 mm dia. G.I. adjustable hangers including
clips (upto 1.2 m length)
Ceiling cleats
G.I. flat 40X3 mm 60mm long
23x0.06 = 1.38 m @ 0.95kg/m = 1.31kg
Total = 1.38 kg say 0.014 q
Galvanised steel plain sheets
Dash hold fastener 12.5 mm dia, 40 mm
long with 6 mm dia bolt
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost for 23 hangers
Cost for one hanger
Say
1525
Unit
Quantity
Rate
Amount
each
23.00
20.00
460.00
quintal
0.014
5600.00
78.40
each
L.S.
23.00
5.20
12.00
1.73
276.00
9.00
day
day
0.35
0.27
487.00
368.00
170.45
99.36
1093.21
10.93
1104.14
165.62
1269.76
55.20
55.20
21.7
Providing and fixing machine moulded aluminium covering of approved pattern

& design, made out of machine cut aluminium sheet and machine holed for
receiving dash fastener, over expansion joints on vertical surfaces/ceiling
floors, the fixing on plate in one row on one side of joint only shall be done
with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including
providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of
200mm centre to centre including drilling holes in the receiving surface and
providing expandable plastic sleeves in holes etc. complete as per direction
21.7.1
Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to

required shade according to IS: 1868, Minimum anodic coating of grade
AC 15)
Code
2704
7389
7347
7348
8776
9977
0112
0114
9999
21.7.2
Code
Description
Unit

MATERIAL
Anodised aluminium sheet 2.5 mm thick,
170 mm wide
5.88 m x0.17 m = 1.00 sqm @ 7.00 kg/
sqm = 7.00 kg
Total = 7.35 kg
Cadmium plated full threaded steel screws
(30x4 mm dia.)
Aluminium washer 2 mm thick 15 mm dia
Stainless steel dash fastener of 8 mm dia
and 75 mm long bolt
LABOUR
Carpenter 2nd class
Beldar
Sundries including machine work
TOTAL
TOTAL
Cost for 7.00 kg
Cost for 1 kg
Say
Quantity
Rate
Amount
kilogram
kilogram
7.35
7.35
225.00
40.00
1653.75
294.00
100 Nos
100 Nos
0.30
0.30
28.00
10.00
8.40
3.00
each
L.S.
30.00
6.50
14.00
1.73
420.00
11.25
day
day
L.S.
0.392
0.392
21.45
448.00
368.00
1.73
175.62
144.26
37.11
2747.39
27.47
2774.86
416.23
3191.09
455.87
455.85
Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder

coating 50 micron)
Description
Unit

MATERIAL
Anodised aluminium sheet 2.5 mm thick,
170 mm wide
5.88 m x0.17 m = 1.00 sqm @ 7.00 kg/
sqm = 7.00 kg
1526
Quantity
Rate
Amount
Code
2704
7392
7347
7348
8776
9977
0112
0114
9999
Description
Unit

Total = 7.35 kg
sections
Cadmium plated full threaded steel screws
(30x4 mm dia.)
Aluminium washer 2 mm thick 15 mm dia
Stainless steel dash fastener of 8 mm dia
and 75 mm long bolt
LABOUR
Carpenter 2nd class
Beldar
Sundries including machine work
TOTAL
TOTAL
Cost for 7.00 kg
Cost for 1 kg
Say
Quantity
Rate
Amount
kilogram
7.35
225.00
1653.75
kilogram
7.35
64.00
470.40
100 Nos
100 Nos
0.30
0.30
28.00
10.00
8.40
3.00
each
L.S.
30.00
6.50
14.00
1.73
420.00
11.25
day
day
L.S.
0.392
0.392
21.45
448.00
368.00
1.73
175.62
144.26
37.11
2923.79
29.24
2953.03
442.95
3395.98
485.14
485.15
21.8
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work
by providing weather silicon sealant over backer rod of approved quality as
per architectural drawings and direction of Engineer-in-charge complete.
21.8.1
Upto 5mm depth and 5 mm width
Code
8646
8654
9999
9999
Description
Unit

MATERIAL
Silicon sealant
(i/c 5% wastage)
Masking tape
Sundries & profile
LABOUR
TOTAL
TOTAL
Cost for 1 metre
Cost for 1 metre
Say
1527
Quantity
Rate
Amount
cartridge
0.087
100.00
8.70
metre
L.S.
L.S.
2.00
2.60
20.80
2.30
1.73
1.73
4.60
4.50
35.98
53.78
0.54
54.32
8.15
62.47
62.47
62.45
21.9
Extra for applying additional anodic coating AC 25 instead of AC 15 to

aluminium extruded sections.
21.9.1
For fixed portion
Code
7391
7389
21.9.2
Code
7391
7389
21.10
Code
Description
Unit

Total
TOTAL
Cost for 41.09 kg
Cost for 1 kg
Say
kilogram
kilogram
Quantity
41.09
-41.09
Rate
50.00
40.00
Amount
2054.50
-1643.60
410.90
4.11
415.01
62.25
477.26
11.61
11.60
For shutters of doors, windows & ventilators

Description
Unit

Total
TOTAL
Cost for 21.65kg
Cost for 1 kg
Say
kilogram
kilogram
Quantity
21.65
-21.65
Rate
50.00
40.00
Amount
1082.50
-866.00
216.50
2.17
218.67
32.80
251.47
11.61
11.60
Providing and fixing double glazed hermetically sealed glazing in aluminium

windows, ventilators and partition etc. with 6 mm thick clear float glass both
side, having 12 mm air gap, including providing EPDM gasket, perforated
aluminium spacers, desiccants, sealant (Both primary and secondary sealant)
etc. as per specifications, drawings and direction of Engineer-in-charge
complete.
Description
Unit

MATERIAL
Hermetically sealled double glazed unit
made with 6mm thick clear float glass both
side having 12 mm air gap = 1.00 sqm.
= 0.10 sqm
Total = 1.10 sqm
1528
Quantity
Rate
Amount
Code
8648
9977
7390
0112
0114
9988
Description
Unit
Hermetically sealed double glazed unit

made with 6 mm thick clear float glass both
side having 12 mm air gap
Carriage of glass
LABOUR
Glazier /
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost for 1 sqm
Say
Quantity
Rate
Amount
sqm
L.S.
metre
1.10
6.66
6.00
2108.00
1.73
20.00
2318.80
11.52
120.00
day
day
L.S.
0.23
0.46
6.89
448.00
368.00
1.73
103.04
169.28
11.92
2734.56
27.35
2761.91
414.29
3176.20
3176.20
21.11
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows
stays of approved quality with necessary stainless steel screws etc. to the
side hung windows as per direction of Engineer-in-charge complete.
21.11.1
205 X 19 mm
Code
8649
8647
9977
0112
0114
21.11.2
Code
8650
8647
9977
Description
Unit
Details of cost sor 10 nos.

MATERIAL
Stainless steel (SS 304 grade) adjustable
friction window stay 205 x 19 mm
Stainless steel screws 30 mm x4 mm
CARRIAGE
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost for 10 nos
Cost for each
Say
Quantity
Rate
Amount
each
100 nos
L.S.
10.00
0.40
2.73
169.00
32.00
1.73
1690.00
12.80
4.72
day
day
0.14
0.14
448.00
368.00
62.72
51.52
1821.76
18.22
1839.98
276.00
2115.98
211.59
211.60
Unit
Quantity
255 X 19 mm
Description
MATERIAL
friction window stay 255 x 19mm
CARRIAGE
1529
each
100 nos
L.S.
10.00
0.40
2.73
Rate
219.00
32.00
1.73
Amount
2190.00
12.80
4.72
Code
0112
0114
21.11.3
Code
8651
8647
9977
0112
0114
21.11.4
Code
8652
8647
9977
0112
0114
Description
Unit
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost for 10 nos
Cost for each
Say
Quantity
day
day
0.14
0.14
Unit
Quantity
Rate
448.00
368.00
Amount
62.72
51.52
2321.76
23.22
2344.98
351.75
2696.73
269.67
269.65
355 X 19 mm
Description
MATERIAL
CARRIAGE
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost for 10 nos
Cost for each
Say
Rate
Amount
each
100 nos
L.S.
10.00
0.40
2.73
191.00
32.00
1.73
1910.00
12.80
4.72
day
day
0.14
0.14
448.00
368.00
62.72
51.52
2041.76
20.42
2062.18
309.33
2371.51
237.15
237.15
Unit
Quantity
510 X 19 mm
Description
MATERIAL
CARRIAGE
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost for 10 nos
Cost for each
Say
1530
Rate
Amount
each
100 nos
L.S.
10.00
0.40
2.73
515.00
32.00
1.73
5150.00
12.80
4.72
day
day
0.14
0.14
448.00
368.00
62.72
51.52
5281.76
52.82
5334.58
800.19
6134.77
613.47
613.45
21.11.5
Code
8653
8647
9977
0112
0114
710 X 19 mm
Description
Unit

MATERIAL
CARRIAGE
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost for 10 nos
Cost for each
Say
Quantity
Rate
Amount
each
100 nos
L.S.
10.00
0.40
2.73
889.00
32.00
1.73
8890.00
12.80
4.72
day
day
0.14
0.14
448.00
368.00
62.72
51.52
9021.76
90.22
9111.98
1366.80
10478.78
1047.87
1047.85
21.12
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm
thick & 2100 mm long with SS screws etc .complete as per direction of
Engineer-in-Charge.
21.12.1
Anodized (AC 15 ) aluminium tubular handle bar
Code
7306
7389
9977
8647
0111
Description
Unit
Details of cost for 10 nos handle bar.

MATERIAL
10x22/7 x 1/4 (0.032x0.032 - 0.026 x
0.026) x 2.10 = 0.0057 cum
0.0057 cum @ 2710 kg/ cum = 15.56kg
Add 5% wastage 0.78 kg
Total = 16.34 kg
LABOUR
Carpenter 1st class
Total
Total
Cost of 10 nos
Cost of 1 no
Say
1531
Quantity
Rate
Amount
kilogram
kilogram
L.S.
100 nos
16.34
16.34
4.42
0.08
200.00
40.00
1.73
32.00
3268.00
653.60
7.65
2.56
day
0.125
487.00
60.88
3992.69
39.93
4032.62
604.89
4637.51
463.75
463.75
21.12.2
Code
7306
7392
9977
8647
0111
21.12.3
Code
7306
7393
9977
8647
0111
Powder coated minimum thickness 50 micron aluminium tubular handle bar

Description
Unit

MATERIAL
10x22/7 x 1/4 (0.032x0.032 - 0.026 x
0.026) x 2.10 = 0.0057 cum
0.0057 cum @ 2710 kg/ cum = 15.56kg
Total = 16.34 kg
Epoxy
sections
LABOUR
Carpenter 1st class
Total
Total
Cost of 10 nos
Cost of 1 no
Say
Quantity
Rate
Amount
kilogram
16.34
200.00
3268.00
kilogram
L.S.
100 nos
16.34
4.42
0.08
64.00
1.73
32.00
1045.76
7.65
2.56
day
0.125
487.00
60.88
4384.85
43.85
4428.70
664.31
5093.01
509.30
509.30
Polyester powder coated minimum thickness 50 micron aluminium tubular

handle bar
Description
Unit

MATERIAL
10x22/7 x 1/4 (0.032x0.032 0.026 x 0.026) x 2.10 = 0.0057 cum
0.0057 cum @ 2710 kg/ cum = 15.56kg
Total = 16.34 kg
aluminium sections
LABOUR
Carpenter 1st class
Total
Total
Cost of 10 nos
Cost of 1 no
Say
1532
Quantity
Rate
Amount
kilogram
16.34
200.00
3268.00
kilogram
L.S.
100 nos
16.34
4.42
0.08
70.00
1.73
32.00
1143.80
7.65
2.56
day
0.125
487.00
60.88
4482.89
44.83
4527.72
679.16
5206.88
520.68
520.70
21.13
Code
7001
0111
9999
21.14
Code
7306
0589
7389
9977
0116
0139
0114
0100
9999
Providing and fixing 100mm brass locks (best make of approved quality) for
aluminium doors including necessary cutting and making good etc. complete.
Description
Detail of cost for 1 nos.
MATERIAL
Brass 100mm mortice latch and lock with
6 levers without pair of handles
LABOUR
Carpenter 1st class
Sundry and screws
Total
Total
Cost of 1 no
Say
Unit
Quantity
Rate
Amount
each
1.00
220.00
220.00
day
L.S.
0.17
3.64
487.00
1.73
82.79
6.30
309.09
3.09
312.18
46.83
359.01
359.00
Providing and fixing anodised aluminium (anodised transparent or dyed to

required shade according to IS: 1868. Minimum anodic coating of grade AC 15)
sub frame work for windows and ventilators with extruded built up standard
tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with
dash fastener of required dia and size (Dash fastener to be paid for separately).
Description
Unit
Details of cost for 4.082kg

MATERIAL
Aluminium Section
(Jindal section no TU/ 3644)
V = 2x2.00 = 4.00 m
H = 2x1.20 = 2.40 m
Total= 6.40 m @ 0.607 kg/m = 3.885kg
Angle cleat 38x38x4.8 mm 50 mm long
4x0.05 = 0.200 m @ 0.985 kg/m = 0.197 kg
sub total = 4.082kg.
Add 5% wastage = 0.204kg
Total = 4.286kg
LABOUR
Fitter (grade 1)
Beldar
Bandhani
Labour for drilling holes, hire charges of
drill, electricity charges, carriage of dash
hold fastners & sundries
TOTAL
TOTAL
Cost for 4.082 kg
Cost for 1 kg
Say
1533
Quantity
Rate
Amount
kilogram
100 Nos
kilogram
L.S.
4.286
0.08
4.286
5.20
200.00
170.00
40.00
1.73
857.20
13.60
171.44
9.00
day
day
day
day
0.04
0.04
0.02
0.01
487.00
407.00
368.00
407.00
19.48
16.28
7.36
4.07
L.S.
5.20
1.73
9.00
1107.43
11.07
1118.50
167.78
1286.28
315.11
315.10
21.15
Providing and fixing aluminium casement windows fastener of required length

for aluminium windows with necessary screws etc. complete.
21.15.1
Anodized (AC 15) aluminium
Code
8660
8666
0111
9977
21.15.2
Code
8661
8666
0111
9977
21.15.3
Code
8662
8666
0111
9977
Description
Unit

MATERIAL
Aluminium casement window fastener
(Anodised AC 15)
LABOUR
Carpenter 1st class
Total
Total
Cost of 10 nos
Cost of 1 nos
Say
Quantity
Rate
Amount
each
100 Nos
10.00
0.40
40.00
35.00
400.00
14.00
day
L.S.
0.06
2.73
487.00
1.73
29.22
4.72
447.94
4.48
452.42
67.86
520.28
52.02
52.00
Powder coated minimum thickness 50 micron aluminium

Description
Unit

MATERIAL
(powder coated )
LABOUR
Carpenter 1st class
Total
Total
Cost of 10 nos
Cost of 1 nos
Say
Quantity
Rate
Amount
each
100 Nos
10.00
0.40
43.00
35.00
430.00
14.00
day
L.S.
0.06
2.73
487.00
1.73
29.22
4.72
477.94
4.78
482.72
72.41
555.13
55.51
55.50
Polyester powder coated minimum thickness 50 micron aluminium

Description
Unit

MATERIAL
(polyester powder coated)
LABOUR
Carpenter 1st class
Total
Total
Cost of 10 nos
Cost of 1 nos
Say
1534
Quantity
Rate
Amount
each
100 Nos
10.00
0.40
42.00
35.00
420.00
14.00
day
L.S.
0.06
2.73
487.00
1.73
29.22
4.72
467.94
4.68
472.62
70.89
543.51
54.35
54.35
21.16
Providing and fixing aluminium round shape handle of outer dia 100 mm with
SS screws etc. complete as per direction of Engineer-in-charge
21.16.1
Anodized (AC 15 ) aluminium
Code
8663
8666
0111
9977
21.16.2
Code
8664
8666
0111
9977
21.16.3
Code
8665
8666
0111
Description
Unit

MATERIAL
Aluminium round shape handle
(anodised AC 15) outer dia 100mm
LABOUR
Carpenter 1st class
Total
Total
Cost of 10 nos
Cost of 1 nos
Say
Quantity
Rate
Amount
each
100 Nos
10.00
0.40
49.00
35.00
490.00
14.00
day
L.S.
0.06
2.73
487.00
1.73
29.22
4.72
537.94
5.38
543.32
81.50
624.82
62.48
62.50
Powder coated minimum thickness 50 micron aluminium

Description
Unit

(powder coated) outer dia 100 mm
LABOUR
Carpenter 1st class
Total
Total
Cost of 10 nos
Cost of 1 nos
Say
Quantity
Rate
Amount
each
100 Nos
10.00
0.40
54.00
35.00
540.00
14.00
day
L.S.
0.06
2.73
487.00
1.73
29.22
4.72
587.94
5.88
593.82
89.07
682.89
68.28
68.30
Polyester powder coated minimum thickness 50 micron aluminium

Description
Unit

MATERIAL
(polyester powder coated) outer dia 100 mm
LABOUR
Carpenter 1st class
1535
Quantity
Rate
Amount
each
100 Nos
10.00
0.40
59.00
35.00
590.00
14.00
day
0.06
487.00
29.22
Code
Description
9977
Total
Total
Cost of 10 nos
Cost of 1 nos
Say
21.17
Code
8774
9977
0116
0139
0114
0100
9999
21.18
Code
Unit
L.S.
Quantity
2.73
Rate
1.73
Amount
4.72
637.94
6.38
644.32
96.65
740.97
74.09
74.10
Providing and fixing anodised aluminium grill (anodised transparent or dyed to

required shade according to IS: 1868 with minimum anodic coating of grade AC
15) of approved design/pattern, with approved standard section and fixed to
the existing window frame with C.P. brass/ stainless steel screws @ 200 mm
centre to centre, including cutting the grill to proper opening size for fixing and
operation of handles and fixing approved anodised aluminium standard section
around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment).
Description
Unit

MATERIAL
Anodised aluminium grill = 10.00 kg
Add 20% wastage = 2 kg = 12 kg
Aluminium Grill
LABOUR
for fixing
Fitter (grade 1)
Beldar
Bandhani
Sundries
TOTAL
TOTAL
Cost for 10.00 kg
Cost for 1 kg
Say
Quantity
Rate
Amount
kg
L.S.
12.00
11.00
250.00
1.73
3000.00
19.03
day
day
day
day
L.S.
0.50
0.25
0.25
0.05
25.00
487.00
407.00
368.00
407.00
1.73
243.50
101.75
92.00
20.35
43.25
3519.88
35.20
3555.08
533.26
4088.34
408.83
408.85
Providing and fixing 12 mm thick frameless toughened glass door shutter of

approved brand and manufacture, including providing and fixing top & bottom
pivot & spring type fixing arrangement and making necessary holes etc. for
fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).
Description
Unit

MATERIAL
Glass= 2.10 Sqm.
1536
Quantity
Rate
Amount
Code
8778
9977
9999
21.4.1
0119
0114
9999
Description
Unit
Add Wastage @ 10% = 0.21 sqm.

Total= 2.31 sqm.
Toughened glass 12 mm thickness
Carriage of glass panes and other materials
Methylated spirit
Stainless steel pivot and spring type fixing
SH:Aluminium Work
LABOUR
Glazier
Beldar
Sundries,sush rog cotton etc.
TOTAL
i.e. on (8904.11 - 4108.80) = 4795.31
TOTAL
- 4108.80) = 4843.26
Cost for 2.10 sqm
Cost for 1 sqm
Say
Quantity
Rate
Amount
sqm
L.S.
L.S.
2.31
8.19
5.33
1747.00
1.73
1.73
each
2.00
2054.40 4108.80(A)
day
day
L.S.
0.90
0.90
1.13
448.00
368.00
1.73
4035.57
14.17
9.22
403.20
331.20
1.95
8904.11
47.95
8952.06
726.49
9678.55
4608.83
4608.85
21.19
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/
Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural
non sag elastomeric PU sealant over backer rod of approved quality as per
architectural drawings and direction of Engineer-in-charge complete,
complying to ASTM C920, DIN 18540-F & ISO 11600
21.19.1
Upto 5 mm depth and 5 mm width
Code
2604
8654
9999
9977
0123
Description
Unit
Details of cost for 10m length

width 5mm & depth 5mm
MATERIAL
Weather/structural non sag elastomeric PU
sealant (600ml Sausage) for joints in RCC/
Brick/ Stone/ wood/ Ceramic/ Gypsum/
Alluminium work complying to ASTM C920,
DIN 18540-F & ISO 11600 incl all taxes
Masking tape
Sundries, including charges of Sealant
gun machine, dhoti etc
LABOUR
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say
1537
Quantity
Rate
Amount
each
metre
1.00
20.00
532.00
2.30
532.00
46.00
L.S.
L.S.
26.00
8.40
1.73
1.73
44.98
14.53
day
0.40
487.00
194.80
832.31
8.32
840.63
126.09
966.72
96.67
96.65
21.19.2
Code
2604
8654
9999
9977
0123
21.19.3
Code
2604
8654
2630
9999
9977
0123

Description
Unit

MATERIAL
Masking tape
Sundries, including charges of Sealant gun
machine, dhoti etc
LABOUR
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say
Quantity
Rate
Amount
each
metre
1.50
20.00
532.00
2.30
798.00
46.00
L.S.
L.S.
26.00
8.40
1.73
1.73
44.98
14.53
day
0.50
487.00
243.50
1147.01
11.47
1158.48
173.77
1332.25
133.22
133.20

Description
Unit

MATERIAL
Masking tape
Baker rod
Sundries, including charges of Sealant gun
machine, dhoti etc
LABOUR
TOTAL
TOTAL
Cost of 10 metre
Cost per metre
Say
1538
Quantity
Rate
Amount
each
metre
metre
3.00
20.00
10.00
532.00
2.30
5.00
1596.00
46.00
50.00
L.S.
L.S.
26.00
8.40
1.73
1.73
44.98
14.53
day
0.75
487.00
365.25
2116.76
21.17
2137.93
320.69
2458.62
245.86
245.85
SUB HEAD : 22.0
WATER PROOFING
1539
22.1
Providing and laying integral cement based treatment for water proofing on
horizontal surface at all depth below ground level for under ground structures
as directed by Engineer-in-Charge and consisting of :
(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab
over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand)
mixed with water proofing compound conforming to IS:2645 in the
recommended proportion over the leveling course (leveling course to be paid
separately). Joints sealed and grouted with cement slurry mixed with water
proofing compound.
(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand)
mixed with water proofing compound in recommended proportions.
(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size
spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
22.1.1
Code
3.8
1169
2216
3.8
0367
2209
1213
0296
Using rough kota stone.

Description
MATERIAL
Ist layer
Cement mortar 1:3 for fixing of stone
10x0.025 = 0.25 cum
Kota stone slab = 10 sqm
Wastage @ 10% = 1 sqm
Total = 11 sqm
Kotastone slab 25mm thick (rough cheseled)
Cartage 11x0.025 @ 2330 kg/m3 = 0.64 t
Cement mortar 1:3
10x0.025 = 0.25 cum
Wastage @ 12% = 0.03 cum
Total = 0.28 cum
for slurry Bed
2x10.00 @ 2kg/m3 = 40.00 kg
Joints
4x3.7x0.02x0.037 = 0.011 cum
25x0.6x0.02x0.037 = 0.011 cum
= 0.022 cum @ 1440 kg/cum =31.68 kg
Total = 71.88 kg or 0. 72 t
Carriage of Cement
Mortar = 0.25 + 0.28 = 0.53 cum
Cement in 0.53 cum @ 5.1 q/cum
= 2.7 quintal
Cement in slurry = 0.73 quintal
Total = 3.43 quintal @ 1 kg for 50 kg of
cement i.e. 6.86 kg
nominal size
@ 8 cudm/sqm 1x10.3x8x1/1000 = 0.08 cum
SUB HEAD : 22- WATER PROOFING
1541
Unit
Quantity
Rate
Amount
cum
0.25
4723.50
1180.88
sqm
11.00
280.00
3080.00
tonne
0.64
92.24
59.03
cum
0.28
4723.50
1322.58
tonne
tonne
0.072
0.072
5700.00
92.24
410.40
6.64
kilogram
6.86
35.00
240.10
cum
0.08
1300.00
104.00
Code
Description
2202

nominal size
Labour for base mortar & kota stone laying
i.e. slurry job
Labour for base mortar & kota stone laying
i/c slurry job
Beldar
Coolie
LABOUR
Labour for top layer & spreading stone grit
Beldar
Bhisti
Sundries
TOTAL
TOTAL
Cost for 10.00 sqm
Cost for 1 sqm
Say
0125
0114
0115
0125
0114
0101
9999
Unit
Quantity
Rate
Amount
cum
0.08
103.77
8.30
day
day
day
1.20
1.00
1.00
448.00
368.00
368.00
537.60
368.00
368.00
day
day
day
L.S.
1.08
1.08
0.45
6.24
448.00
368.00
407.00
1.73
483.84
397.44
183.15
10.80
8760.76
87.61
8848.37
1327.26
10175.63
1017.56
1017.55
22.2
Providing and laying integral cement based treatment for water proofing on
the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with
cement slurry mixed with water proofing compound conforming to IS:2645 in
recommended proportions with a gap of 20 mm (minimum) between stone
slabs and the receiving surfaces and filling the gaps with neat cement slurry
mixed with water proofing compound and finishing the exterior of stone slab
with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat
cement punning mixed with water proofing compound in recommended
proportion complete at all levels and as directed by Engineer-in-charge :
22.2.1
Using rough Kota stone
Code
1169
2216
Description
MATERIAL
Ist layer
Kota stone slab = 10 sqm
Wastage @ 10% = 1 sqm
Total = 11 sqm
Kotastone slab 25mm thick (rough cheseled)
Cartage 11x0.025 @ 2330 kg/m3 = 0.64t
Cement slurry for jointing
6x3.70 = 22.20 m
7x2.78 = 19.46 m
=41.66x0.025x0.012 = 0.013 cum
Cement slurry for filling 20 mm gap
10x0.02 = 0.200 cum
1542
Unit
Quantity
Rate
Amount
sqm
11.00
280.00
3080.00
tonne
0.64
92.24
59.03
Code
0367
2209
13.9.2
1213
0125
0114
0115
9999
22.3
Description
= 0.213 cum @ 1440 kg/cum = 306.70 kg or
0.307 t
Carriage of Cement
Cement plaster 1:3 with neat cement punning
Water proofing material
Cement slurry = 0.31 t = 310 kg
Cement plaster 1:3 @ 13.62 q/100sqm
= 136.20 kg
Total = 446.20 kg @ 1 kg for 50 kg of
cement i.e. 8.90 kg
LABOUR
Fixing of Kota stone and applying cement
slurry.
Beldar
Coolie
Sundries and scaffolding
TOTAL
i.e. on (11226.11 - 3132.50) = 8093.61
TOTAL
- 3132.50) = 8174.55
Cost for 10.00sqm
Cost for 1 sqm
Say
Unit
Quantity
Rate
Amount
tonne
tonne
0.31
0.31
5700.00
92.24
1767.00
28.59
sqm
10.00
313.25
3132.50(A)
kilogram
8.90
35.00
311.50
day
day
day
L.S.
3.00
3.00
1.00
18.20
448.00
368.00
368.00
1.73
1344.00
1104.00
368.00
31.49
11226.11
80.94
11307.05
1226.18
12533.23
1253.32
1253.30
Providing and laying water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing
compound conforming to IS 2645 in recommended proportions including
rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed
with water proofing compound in recommended proportion including rounding
off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.
per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet
should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
Code
0367
2209
Description
Unit

MATERIAL
Cement slurry @ 4.4 kg/sqm
= 44.00 kg or 0.044 t
Carriage of Cement
tonne
tonne
1543
Quantity
0.044
0.044
Rate
5700.00
92.24
Amount
250.80
4.06
Code
3.8
0155
0115
0101
9999
0313
2211
3002
9977
1213
0131
0114
0130
9999
Description
MATERIAL
Cement plaster 1:3 (20 mm thick)
LABOUR
Mason (average)
Coolie
Bhisti
Scafolding and sundries
= 10x1.70= 17 kg = 0.017 t
Polyvinyle chloride sheet 400 micron thick
CARRIAGE
@ 1 kg per 50 kg of cement used
Cement slurry = 44 kg
Cement plaster 1:3
10x(13.62xl00)/100= 136.2 kg Total = 180.2
kg/50 = 3.60 kg
LABOUR
Painter
Beldar
Mistry
Sundries
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.224
4723.50
1058.06
day
day
day
L.S.
0.94
1.02
1.10
12.61
467.00
368.00
407.00
1.73
438.98
375.36
447.70
21.82
tonne
0.017
34561.00
587.54
tonne
sqm
L.S.
kilogram
0.017
10.00
13.00
3.60
103.77
40.00
1.73
35.00
1.76
400.00
22.49
126.00
day
day
day
L.S.
0.20
1.33
0.06
7.28
448.00
368.00
487.00
1.73
89.60
489.44
29.22
12.59
4355.42
43.55
4398.97
659.85
5058.82
505.88
505.90
22.4
Providing and Placing in position suitable PVC water stops conforming to

IS:12200 for construction/ expansion joints between two RCC members and
fixed to the reinforcement with binding wire before pouring concrete etc.
complete :
22.4.1
Serrated with central bulb (225 mm wide, 8-11 mm thick)
Code
7427
0114
9999
Description
Unit

MATERIAL
Water stops Serrated with central bulb
(225 mm wide, 8-11 mm thick)
LABOUR
Beldar
Sundries & wire etc.
TOTAL
TOTAL
Cost for 100 metres
Cost for 1 metre
Say
1544
Quantity
Rate
Amount
metre
100.00
211.00
21100.00
day
L.S.
2.00
26.00
368.00
1.73
736.00
44.98
21880.98
218.81
22099.79
3314.97
25414.76
254.14
254.15
22.4.2
Code
7428
0114
9999
22.4.3
Code
7429
0114
9999
22.5
Dumb bell with central bulb (180 mm wide, 8 mm thick)

Description
Unit

MATERIAL
Water stops Dumb bell with central bulb
LABOUR
Beldar
TOTAL
TOTAL
Cost for 100 metres
Cost for 1 metre
Say
Quantity
Rate
Amount
metre
100.00
165.00
16500.00
day
L.S.
2.00
26.00
368.00
1.73
736.00
44.98
17280.98
172.81
17453.79
2618.07
20071.86
200.71
200.70
Unit
Quantity
Kickers (320 mm wide, 5 mm thick)

Description
MATERIAL
Kickers
LABOUR
Beldar
TOTAL
TOTAL
Cost for 100 metres
Cost for 1 metre
Say
Rate
Amount
metre
100.00
195.00
19500.00
day
L.S.
2.00
26.00
368.00
1.73
736.00
44.98
20280.98
202.81
20483.79
3072.57
23556.36
235.56
235.55
Providing and laying water proofing treatment in sunken portion of WCs,

bathroom etc., by applying cement slurry mixed with water proofing cement
compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing
cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4
hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing
cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4
hours followed with water curing for 48 hours.
The rate includes preparation of surface, treatment and sealing of all joints,
corners, junctions of pipes and masonry with polymer mixed slurry.
Code
Description
Unit

Cement 10x(0.488+0.242) = 7.30 kg
Sealing fillets 10x0.5 kg / sqm = 5.00 kg
Total = 12.30 kg = 0.012 tonne
1545
Quantity
Rate
Amount
Code
Description
0367
2209

Carriage of Cement
Bonding material 1.6 kgx30x2 = 96 kg
Bitumen (blown/residual type)
10x(0.25+0.126) = 3.79 kg
Sealing fillets 10x0.10 kg / sqm = 1.00 kg
Wastage @ 5% on 4.79 kg = 0.24 kg
Total = 5.03 kg Say 5.00 kg
Polymer modified cementation coating
LABOUR
Mason (average)
Beldar
Bhisti
Sundries, brushes etc
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
8501
0155
0114
0101
9999
22.6
Unit
Quantity
Rate
Amount
tonne
tonne
0.012
0.012
5700.00
92.24
68.40
1.11
kilogram
5.00
140.00
700.00
day
day
day
L.S.
2.00
2.00
0.25
15.60
467.00
368.00
407.00
1.73
934.00
736.00
101.75
26.99
2568.25
25.68
2593.93
389.09
2983.02
298.30
298.30
Providing and laying water proofing treatment on roofs of slabs by applying

cement slurry mixed with water proofing cement compound consisting of
applying:
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm
mixed with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green.
Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/
sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse
sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by
water curing for 48 hours. The entire treatment will be taken upto 30 cm on
parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will be paid
for separately.
For the purpose of measurement the entire treated surface will be measured."
Code
0367
Description
Unit

MATERIAL
Cement 10x(1.289+0.488) = 17.77 kg
Sealing fillets @ 10% = 1.77 kg
Total = 19.54kg = 0.020 tonne
tonne
1546
Quantity
0.02
Rate
5700.00
Amount
114.00
Code
Description
2209
Carriage of Cement
Bonding material 1.6 kgx30x2 = 96 kg
Bitumen (blown/residual type)
10x(0.253+0.67) = 9.23 kg
Wastage @ 5% = 0.46 kg
Total = 9.69 kg
Polymer modified cementation coating
Fibre Glass cloth = 10.00 sqm
Wastage @ 10 % - 1.00 sqm
Total = 11.00 sqm
Fibre glass cloth
LABOUR
Mason (average)
Beldar
Bhisti
TOTAL
TOTAL
Cost for 10 sqm
Cost for 1 sqm
Say
8501
8502
0155
0114
0101
9999
22.7
Unit
Quantity
Rate
Amount
tonne
0.02
92.24
1.84
kilogram
9.69
140.00
1356.60
sqm
11.00
44.00
484.00
day
day
day
L.S.
2.00
1.00
0.25
23.40
467.00
368.00
407.00
1.73
934.00
368.00
101.75
40.48
3400.67
34.01
3434.68
515.20
3949.88
394.98
395.00
Providing and laying integral cement based water proofing treatment including
preparation of surface as required for treatment of roofs, balconies, terraces
etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed
with water proofing compound conforming to IS. 2645 and approved by
Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm
height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115
mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with
water proofing compound conforming to IS : 2645 and approved by Engineerin-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse
sand ) admixed with water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge to required slope and treating similarly the
adjoining walls upto 300 mm height including rounding of junctions of walls
and slabs.
(c) After two days of proper curing applying a second coat of cement slurry
using 2.75 kg/ sqm of cement admixed with water proofing compound
conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1
cement :4 coarse sand) admixed with water proofing compound conforming to
IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth
of approved quality in top layer of plaster and finally finishing the surface with
trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm
deep.
1547
(e) The whole terrace so finished shall be flooded with water for a minimum
period of two weeks for curing and for final test.All above operations to be
done in order and as directed and specified by the Engineer-in-Charge :
22.7.1
Code
0367
3.10
0285
2260
3.10
0114
0101
0123
0124
0128
0114
9999
0367
0114
13.6.1
1213
7233
0124
0114
9999
0124
0114
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Description
Unit

i) Cement slury
ii) Cement mortar 1:5 (1 cement:
5 coarsesand)
Rate as per Item No.3.10 of SH:Mortars
iii) Roof treatment with brick bat and cement
mortar
MATERIAL
nominal size
Cement mortar 1:5
LABOUR
Beldar
Bhisti
Mate
Extra labour for ramming
Beldar
Sundries
iv) Cement slury
Beldar
v) 20 mm cement plaster 1:4 (1 cement :
4 coarse sand)
vi) Water proofing compound
vi) Water proofing compound
27.50+27.50+69.40+124.00 = 248.40 kg @
1 kg per bag of cement
Extra for making chequers for 10 sqm
Fibre glass tissue reinforcement Type II
Grade I
Beldar
Chequer plate
Add labour for laying 20 mm bed mortar
Beldar
1548
Quantity
Rate
Amount
tonne
0.0275
5700.00
156.75
cum
0.224
3565.05
798.57
cum
cum
0.94
0.94
750.00
112.79
705.00
106.02
cum
0.50
3565.05
1782.53
day
day
day
day
day
1.75
0.28
0.05
0.05
0.04
368.00
407.00
487.00
448.00
407.00
644.00
113.96
24.35
22.40
16.28
day
L.S.
0.25
13.65
368.00
1.73
92.00
23.61
tonne
day
0.0275
0.20
5700.00
368.00
156.75
73.60
sqm
10.00
252.40
2524.00(A)
kilogram
5.00
35.00
175.00
sqm
day
day
L.S.
10.50
0.36
0.36
13.65
86.00
448.00
368.00
1.73
903.00
161.28
132.48
23.61
day
day
0.54
0.54
448.00
368.00
241.92
198.72
Code
Description
Unit
Quantity
0101
Bhisti
TOTAL
i.e. on (9258.98 - 2524.00) = 6734.98
TOTAL
- 2524.00) = 6802.33
Cost for 10 sqm
Cost for one sqm
Say
day
0.45
Rate
407.00
Amount
183.15
9258.98
67.35
9326.33
1020.35
10346.68
1034.66
1034.65
22.8
Providing and laying four courses water proofing treatment with bitumen felt
over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15
conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each
course, second course of roofing felt type 3 grade-I (hessian based self finished
bitumen felt) and fourth and final course of stone grit 6 mm and down size or
peasized gravel spread at 6 cubic decimeter per square metre, including
preparation of surface but excluding grading complete with :
22.8.1
Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322
Code
0313
0322
1177
2202
2211
0370
2200
9999
0131
0114
0130
Description
Blown or / and residual bitumen applied hot
= 2x1.45x30 = 87 kg
Hession felt type 3 Grade I
(hessian base self finished bitumen felt)
= 30sqm
Add for over lapping @ 10% = 3 sqm.
Total = 33 Sqm
Bitumen felt :Type 3 grade 1
Stone grit 6 mm and down size or pea
sized gravel
30x6=180 cudm
nominal size
0.087tx2.7x.001x33=0.162t
Coal (steam)
= 2 quintals/t of bitumen i.e. 2x0.087
=0.174q
Praparing roof surface, sutting groove
and making good etc.
LABOUR
Painter
Beldar
Mistry
1549
Unit
Quantity
Rate
Amount
tonne
0.087
34561.00
3006.81
sqm
33.00
70.00
2310.00
cum
0.18
795.00
143.10
cum
tonne
0.18
0.162
103.77
103.77
18.68
16.81
quintal
0.174
400.00
69.60
tonne
0.0174
118.59
2.06
L.S.
134.55
1.73
232.77
day
day
day
2.16
3.24
0.18
448.00
368.00
487.00
967.68
1192.32
87.66
Code
Description
Unit
Quantity
9999
Sundries, brushes etc.

TOTAL
TOTAL
Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say
L.S.
6.76
22.9
Code
0313
0322
2211
1177
2202
0370
2200
9999
0131
0114
0130
9999
Rate
1.73
Amount
11.69
8059.18
80.59
8139.77
1220.97
9360.74
312.02
312.00
Providing and laying six courses water proofing treatment with bitumen felt
over roofs consisting of first, third and fifth course of blown bitumen 85/25 or
90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square
metre of area respectively, second and fourth courses of roofing felt type 3
grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) ,sixth
and final course of stone grit 6 mm and down size or pea sized gravel spread at
6 cubic decimeter per sqm including preparation of surface but excluding
grading, complete.
Description
(1.45+1.20+1.45)x30=123kg
Bitumen felt Type 3 grade 1
(hessian base self finished bitumen felt)
= 60 sqm.+
Total =66 Sqm
Bitumen felt :Type 3 grade 1
0.123t+2.7x.001x66=0.273t
sized gravel
30x6=180cudm
nominal size
Coal (steam)
= 2 quintals/t of bitumen i.e. 2x0.123=0.246q
Praparing roof surface, sutting groove and
making good etc.
LABOUR
Painter
Beldar
Mistry
TOTAL
TOTAL
Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say
1550
Unit
Quantity
Rate
Amount
tonne
0.123
34561.00
4251.00
sqm
tonne
66.00
0.273
70.00
103.77
4620.00
28.33
cum
0.18
795.00
143.10
cum
quintal
0.18
0.246
103.77
400.00
18.68
98.40
tonne
0.0246
118.59
2.92
L.S.
134.55
1.73
232.77
day
day
day
L.S.
3.24
4.86
0.2
6.76
448.00
368.00
487.00
1.73
1451.52
1788.48
97.40
11.69
12744.29
127.44
12871.73
1930.76
14802.49
493.41
493.40
22.10
Code
0313
0318
2211
1177
2202
0370
2200
9999
0131
0114
0130
9999
over roofs consisting of first, third and fifth courses of blown or / and residual
bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area
respectively, second and fourth courses of roofing felt type 2 grade I (fibre base
self finished bitumen felt) six and final courses of stone grit 6 mm and down
size or pea sized gravel spread at 6cu.dm per sqm including preparation of
surface, excluding grading, compete.
Description
Unit

Blown bitumen applied hot
(1.45+1.20+1.70)x30 = 130.5 kg.
Bitumen felt type B grade I (fibre base
self finished bitumen felt) = 60 sqm.
Total =66 Sqm
Bitumen felt fibre base (vegetable or
animal):Type 2 grade 1
(0.131 t+2.22x.001x66 = 0.275t)
sized gravel
30x6=180cudm
CARRIAGE:
nominal size
Fuel (Steam coal) = 2 quintals/t of bitumen
i.e. 0.1305=0.261q
Coal (steam)
making good etc.
LABOUR
Painter
Beldar
Mistry
TOTAL
TOTAL
Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say
1551
Quantity
Rate
Amount
tonne
0.1305
34561.00
4510.21
sqm
tonne
66.00
0.275
70.00
103.77
4620.00
28.54
cum
0.18
795.00
143.10
cum
0.18
103.77
18.68
quintal
tonne
0.261
0.0261
400.00
118.59
104.40
3.10
L.S.
134.55
1.73
232.77
day
day
day
L.S.
4.32
6.48
0.36
6.76
448.00
368.00
487.00
1.73
1935.36
2384.64
175.32
11.69
14167.81
141.68
14309.49
2146.42
16455.91
548.53
548.55
22.11
Code
0313
0318
2211
1177
2202
0370
2200
9999
0131
0114
0130
9999
over roofs consisting of first, third and fifth courses of blown or / and residual
bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area
respectively, second and fourth courses of roofing felt type 2 grade II (glass
fibre base self finished bitumen felt) and sixth and final course of stone grit 6
mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm
including preparation of surface but excluding grading, complete.
Description
Unit

(1.45+1.20+1.70)x30 =130.5 kg.
Bitumen felt as per IS 7193 Grade II
(fibre base self finished bitumen felt)
= 60 sqm. +
Total =66 Sqm
Bitumen felt fibre base (vegetable or
animal):As per IS 7193 Grade I
(0.131t+3.08x.001x66=334t.)
Stone grit 6 mm and down size or
pea sized gravel
30x6=180cudm
nominal size
Fuel (Steam coal) = 2 quintals/t of bitumen
i.e. 2x0.1305=0.261q
Coal (steam)
making good etc.
LABOUR
Painter
Beldar
Mistry
TOTAL
TOTAL
Cost of 30.00 Sqm.
Cost of 1.00 Sqm.
Say
1552
Quantity
Rate
Amount
tonne
0.1305
34561.00
4510.21
sqm
tonne
66.00
0.334
70.00
103.77
4620.00
34.66
cum
0.18
795.00
143.10
cum
0.18
103.77
18.68
quintal
tonne
0.261
0.0261
400.00
118.59
104.40
3.10
L.S.
134.55
1.73
232.77
day
day
day
L.S.
4.32
6.48
0.36
6.76
448.00
368.00
487.00
1.73
1935.36
2384.64
175.32
11.69
14173.93
141.74
14315.67
2147.35
16463.02
548.76
548.75
22.12
Code
0316
9977
0131
0114
9999
Supplying and applying bituminous solution primer on roof and / or wall surface
at 0.24 litre per sqm.
Description
Details of cost for 10 sq. metres
MATERIAL
CARRIAGE
LABOUR
Painter
Beldar
Sundries brushes etc.
TOTAL
TOTAL
Cost of 10.00 Sqm.
Cost of 1.00 Sqm.
Say
Unit
Quantity
Rate
Amount
litre
L.S.
2.40
1.43
50.00
1.73
120.00
2.47
day
day
L.S.
0.17
0.17
13.52
448.00
368.00
1.73
76.16
62.56
23.39
284.58
2.85
287.43
43.11
330.54
33.05
33.05
22.13
Deduct for omitting in water proofing treatment final course of spreading stone
grit 6 mm down size or pea sized gravel :
22.13.1
at 6 cudm per sqm
Code
1177
2202
9999
9999
22.13.2
Code
1177
2202
Description
Unit
Quantity
cum
0.06
795.00
47.70
cum
L.S.
L.S.
0.06
21.58
6.76
103.77
1.73
1.73
6.23
37.33
11.69
102.95
1.03
103.98
15.60
119.58
11.95
11.95
Description
Unit
Quantity

MATERIAL
sized gravel
6x10 = 60 cudm
nominal size
cum
0.08
795.00
63.60
cum
0.08
103.77
8.30

MATERIAL
sized gravel
6x10 = 60 cudm
nominal size
Labour for screening and spreading grit
Sundries
TOTAL
TOTAL
Cost of 10.00 Sqm.
Cost of 1.00 Sqm.
Say
Rate
Amount
at 8 cudm per sqm
1553
Rate
Amount
Code
Description
Unit
Quantity
9999
9999
Labour for screening and spreading grit

Sundries
TOTAL
TOTAL
Cost of 10.00 Sqm.
Cost of 1.00 Sqm.
Say
L.S.
L.S.
26.91
6.76
Rate
1.73
1.73
Amount
46.55
11.69
130.14
1.30
131.44
19.72
151.16
15.11
15.10
22.14
Grading roof for water proofing treatment with
22.14.1
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size)
Code
0295
0297
2202
0982
2203
0367
2209
0114
0101
0123
9999
0002
0012
9999
22.14.2
Code
3.8
0155
Description
Details of cost for one cum.
nominal size
nominal size
nominal size
Carriage of Cement
LABOUR
Beldar
Bhisti
Hire charges of Concrete Mixer 0.25 to
0.40 cum with hooper
Vibrator (Needle type 40 mm)
Sundries for laying in terrace
TOTAL
TOTAL
Cost of one cum
Say
Unit
Quantity
Rate
Amount
cum
0.67
1300.00
871.00
cum
0.22
1300.00
286.00
cum
cum
cum
tonne
tonne
0.89
0.45
0.45
0.32
0.32
103.77
1200.00
103.77
5700.00
92.24
92.35
540.00
46.70
1824.00
29.52
day
day
day
L.S.
1.63
0.70
0.10
14.30
368.00
407.00
487.00
1.73
599.84
284.90
48.70
24.74
day
day
L.S.
0.07
0.07
45.76
800.00
350.00
1.73
56.00
24.50
79.16
4807.41
48.07
4855.48
728.32
5583.80
5583.80

Description
MATERIAL
Cement mortar 1:3
LABOUR
Mason (average)
1554
Unit
Quantity
Rate
Amount
cum
1.00
4723.50
4723.50
day
1.00
467.00
467.00
Code
Description
Unit
Quantity
0114
0101
0115
9999
Beldar
Bhisti
Coolie
Sundries
TOTAL
TOTAL
Cost of one cum
Say
day
day
day
L.S.
2.00
0.50
5.00
11.70
22.14.3
Code
3.9
0155
0114
0101
0115
9999
22.15
Code
Rate
368.00
407.00
368.00
1.73
Amount
736.00
203.50
1840.00
20.24
7990.24
79.90
8070.14
1210.52
9280.66
9280.65
Cement mortar 1:4 (1cement : 4 coarse sand)

Description
MATERIAL
Cement mortar 1:4
LABOUR
Mason (average)
Beldar
Bhisti
Coolie
Sundries
TOTAL
TOTAL
Cost of one cum
Say
Unit
Quantity
Rate
Amount
cum
1.00
3970.50
3970.50
day
day
day
day
L.S.
1.00
2.00
0.50
5.00
10.79
467.00
368.00
407.00
368.00
1.73
467.00
736.00
203.50
1840.00
18.67
7235.67
72.36
7308.03
1096.20
8404.23
8404.25
Providing and laying in situ seven course water proofing treatment with APP
(Atactic poly-propylene) modified Polymeric memberane over roof consisting
of first coat of bitumen primer @ 0.40 Kg per sqm, 2nd, 4th & 6th courses of
bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of
grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP
modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting
of five layers prefabricated with centre core as 20 micron HMHDPE film
sandwiched on both sides with polymeric mix and the polymeric mix is protected
on both side with 20 micron HMHDPE film. 7th, the top most layer shall be
finished with brick tiles of class designation 10 grouted with cement mortar 1:3
(1cement : 3 fine sand) mixed with 2% integral water proofing compound by
weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine
sand) and finished neat (item of laying brick tiles shall be paid for separately).
Description
Unit

MATERIAL
APP modified polymeric felt (two layers)
1.5 mm thick = 2x30 = 60 sqm
1555
Quantity
Rate
Amount
Code
8200
0316
0313
2211
9977
0370
2200
9999
0131
0114
0130
9999
22.16
Code
8201
Description
Add 10% wastage = 6 sqm
Total = 66 sqm
A.P.P. modified polymeric felt (two layers)
1.5 mm thick
0.4x30 = 12
3x36 =108 kg = 0.108 tonne
Carriage of polymeric felt
Coal (steam)
Preparing roof surface, cutting grooves
LABOUR
Painter
Beldar
Mistry
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
litre
66.00
12.00
75.00
50.00
4950.00
600.00
tonne
0.108
34561.00
3732.59
tonne
L.S.
quintal
tonne
0.12
7.80
0.174
0.0174
103.77
1.73
400.00
118.59
12.45
13.49
69.60
2.06
L.S.
134.55
1.73
232.77
day
day
day
L.S.
2.16
3.24
0.18
6.76
448.00
368.00
487.00
1.73
967.68
1192.32
87.66
11.69
11872.31
118.72
11991.03
1798.65
13789.68
459.65
459.65
Providing and laying in situ five course water proofing treatment with APP
(Atactic Polypropylene) modified Polymeric memberane over roof consisting
of first coat of bitumen primer @ 0.40Kg per sqm, 2nd & 4th courses of bonding
material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/
25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric
membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers
prefabricated with centre core as 100 micron HMHDPE film sandwiched on both
sides with polymeric mix and the polymeric mix is protected on both side with
20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles
of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand)
mixed with 2% integral water proofing compound by weight of cement over a 12
mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item
of laying brick tiles shall be paid for separately).
Description
Unit
Quantity

MATERIAL
2.0 mm thick = 30 sqm
Total = 33 sqm
2 mm thick
sqm
33.00
1556
Rate
98.00
Amount
3234.00
Code
Description
Unit
Quantity
0316

0.4x30 = 12
1.20x30x2 =72 kg = 0.072 tonne
Coal (steam)
LABOUR
Painter
Beldar
Mistry
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
litre
12.00
50.00
600.00
tonne
0.072
34561.00
2488.39
tonne
L.S.
quintal
tonne
0.084
7.80
0.174
0.0174
103.77
1.73
400.00
118.59
8.72
13.49
69.60
2.06
L.S.
134.55
1.73
232.77
day
day
day
L.S.
1.58
2.37
0.13
6.76
448.00
368.00
487.00
1.73
707.84
872.16
63.31
11.69
8304.03
83.04
8387.07
1258.06
9645.13
321.50
321.50
0313
2211
9977
0370
2200
9999
0131
0114
0130
9999
22.17
Code
8201
0316
Rate
Amount
Providing and laying in situ seven course water proofing treatment with APP
(Atactic Polypropylene) modified Polymeric memberane over roof consisting
of first coat of bitumen primer @ 0.40 Kg per sqm, 2nd, 4th & 6th courses of
bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of
grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP
modified Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting
of five layers prefabricated with centre core as 100 micron HMHDPE film
sandwiched on both sides with polymeric mix and the polymeric mix is protected
on both side with 20 micron HMHDPE film. 7th, the top most layer shall be
finished with brick tiles of class designation 10 grouted with cement mortar 1:3
(1 cement : 3 fine sand) mixed with 2% integral water proofing compound by
weight of cement over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine
sand) and finished neat (item of laying brick tiles shall be paid for separately).
Description
MATERIAL
2.0 mm thick = 2x30 = 60 sqm
Total = 66 sqm
2 mm thick
0.4x30 = 12
1557
Unit
Quantity
sqm
litre
66.00
12.00
Rate
98.00
50.00
Amount
6468.00
600.00
Code
Description
0313

3course x 36 = 108 kg = 0.108 tonne
Coal (steam)
LABOUR
Painter
Beldar
Mistry
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
2211
9977
0370
2200
9999
0131
0114
0130
9999
Unit
Quantity
Rate
Amount
tonne
0.108
34561.00
3732.59
tonne
L.S.
quintal
tonne
0.12
7.80
0.174
0.0174
103.77
1.73
400.00
118.59
12.45
13.49
69.60
2.06
L.S.
134.55
1.73
232.77
day
day
day
L.S.
2.16
3.24
0.18
6.76
448.00
368.00
487.00
1.73
967.68
1192.32
87.66
11.69
13390.31
133.90
13524.21
2028.63
15552.84
518.42
518.40
22.18
Providing and fixing APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 2 mm thick water proofing membrance, black finished
reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen
membrane @ 0.40 litre/sqm by the same membrance manufacture of density at
25C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the
layer of membrane shall be laid using Butane torch and sealing all joints etc.,
and preparing the surface complete. The vital physical and chemical parameters
of the membrane shall be as under : Joint strength in longitudinal and transverse
direction at 23C as 350/300 N/ 5 cm. Tear strength in longitudinal and transverse
direction as 60/80N. Softening point of membrane not less than 150C. Cold
flexibility shall be upto -2C when tested in accordance with ASTM, D - 5147.
The laying of membrane shall be got done through the authorised applicator of
the manufacture of membrane.
22.18.1
2mm (for corrugated roof sheets)
Code
8203
8206
2211
9977
1241
9999
Description
MATERIAL
A.P.P. modified 2 mm thick - 30 sqm
Add 10% for wastage - 3 sqm
Total = 33 sqm
A.P.P. modified 2 mm thick membrance
reinforced with glass fibre matt
Bitumen primer for bitumen membrance
Carriage of bitumen membrance
Commercial LPG in cylinder
1558
Unit
Quantity
sqm
litre
tonne
L.S.
kg
L.S.
33.00
12.00
0.012
7.80
7.00
49.53
Rate
100.00
90.00
103.77
1.73
65.00
1.73
Amount
3300.00
1080.00
1.25
13.49
455.00
85.69
Code
0159
0130
0114
9999
Description
LABOUR
Skilled torch operator for laying tack
Mistry
Beldar
Sundries, brushes, bitumen torch etc
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
Unit
Quantity
day
day
day
L.S.
2.16
0.18
3.24
23.40
Rate
487.00
487.00
368.00
1.73
Amount
1051.92
87.66
1192.32
40.48
7307.81
73.08
7380.89
1107.13
8488.02
282.93
282.95
22.19
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated

five layer, 3 mm thick water proofing membrane, black finished reinforced with
glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @
0.40 litre/sqm by the same membrane manufactured of density at 25C, 0.87 - 0.89
kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall
be laid using butane torch and sealing all joints etc., and preparing the surface
complete. The vital physical and chemical parameters of the membrane shall be as
under : Joint strength in longitudinal and transverse direction at 23C as 350/300 N/
5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening
point of membrane not less than 150C. Cold flexibility shall be upto -2C when
tested in accordance with ASTM, D - 5147. The laying of membrane shall be got
done through the authorised applicator of the manufacturer of membrane :
22.19.1
3 mm thick
Code
8204
8206
2211
9977
1241
9999
0159
0130
0114
9999
Description
MATERIAL
Total = 33 sqm
reinforced with glass fibre matt
LABOUR
Mistry
Beldar
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
1559
Unit
Quantity
Rate
Amount
sqm
litre
tonne
L.S.
kg
L.S.
33.00
12.00
0.012
7.80
7.00
49.53
200.00
90.00
103.77
1.73
65.00
1.73
6600.00
1080.00
1.25
13.49
455.00
85.69
day
day
day
L.S.
2.16
0.18
3.24
23.40
487.00
487.00
368.00
1.73
1051.92
87.66
1192.32
40.48
10607.81
106.08
10713.89
1607.08
12320.97
410.69
410.70
22.20
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated

five layer 3 mm thick water proofing membrane, black finished reinforced with nonwoven polyester matt consisting of a coat of bitumen primer for bitumen membrane
@ 0.40 litre/sqm by the same membrane manufacture of density at 25C, 0.87-0.89
kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall
be laid using Butane Torch and sealing all joints etc, and preparing the surface
complete. The vital physical and chemical parameters of the membrane shall be as
under : Joint strength in longitudinal and transverse direction at 23C as 650/ 450N/
5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening
point of membrane not less than 150C. Cold flexibility shall be upto -2C when
tested in accordance with ASTM, D - 5147. The laying of membrane shall be got
done through the authorised applicator of the manufacturer of membrane :
22.20.1
3 mm thick
Code
8205
8206
2211
9977
1241
9999
0159
0130
0114
9999
22.21
Code
Description
MATERIAL
Total = 33 sqm
reinforced with polyster matt
Fuel
LABOUR
Mistry
Beldar
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
litre
tonne
L.S.
33.00
12.00
0.012
7.80
205.00
90.00
103.77
1.73
6765.00
1080.00
1.25
13.49
kg
L.S.
7.00
49.53
65.00
1.73
455.00
85.69
day
day
day
L.S.
2.16
0.18
3.24
23.4
487.00
487.00
368.00
1.73
1051.92
87.66
1192.32
40.48
10772.81
107.73
10880.54
1632.08
12512.62
417.08
417.10
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100%
polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent
touch by heating the membrane by Butane Torch as per manufactures
recommendation.
Description
Unit

MATERIAL
Geotextile 120 gsm membrance - 30 sqm
Add 5% for wastage - 1.50 sqm
Total = 31.50 sqm
1560
Quantity
Rate
Amount
Code
Description
Unit
Quantity
8207
9977
Geotextile 120 gsm membrance

Carriage of Geotextile
LABOUR
or fitter 2.16 / 5 = 0.43
Mistry
0.18 / 5 = 0.04
Beldar
3.24-5 / 0.65
Sundries, torch, LPG etc
TOTAL
TOTAL
Cost for 30 sqm
Cost for 1 sqm
Say
sqm
L.S.
31.50
7.80
45.00
1.73
1417.50
13.49
day
0.43
487.00
209.41
day
0.04
487.00
19.48
day
0.65
368.00
239.20
L.S.
46.80
1.73
80.96
1980.04
19.80
1999.84
299.98
2299.82
76.66
76.65
0159
0130
0114
9999
22.22
Code
0352
9999
9999
9999
Rate
Amount
Providing and mixing integral crystalline admixture for waterproofing treatment to

RCC structures like basement raft, retaining walls, reservior, sewage & water
treatment plant, tunnels / subway and bridge deck etc.. at the time of transporting
of concrete into the drum of the ready-mix truck , using integral crystalline admixture
@0.80% (minimum) to the weight of cement content per cubic meter of concrete)
or higher as recommended by the manufacturer's specification in reinforced cement
concrete at site of work. The material shall meet the requirements as specified in
ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%,
compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic
pressure. The crystalline admixture shall be capable of self-healing of cracks up to
a width of 0.50mm. The work shall be carried out all complete as per specification
and the direction of the Engineer-in-charge. The product performance shall carry
guarantee for 10 years against any leakage.
Description
Details of cost for 1.00 Kg
MATERIAL :
Integral crystalline admixture
LABOUR :
For measuring, making and mixing etc..
Sundries
Carriage of material and tools cost etc..
TOTAL
TOTAL
Cost for 1.00 Kg
Say
1561
Unit
Quantity
Rate
Amount
kg
1.00
309.00
309.00
L.S.
L.S.
L.S.
5.80
1.15
1.75
1.73
1.73
1.73
10.03
1.99
3.03
324.05
3.24
327.29
49.09
376.39
376.40
22.22A
Code
8511
9977
0115
0131
9999
9999
Providing and applying fibre reinforced elastomeric liquid water proofing membrane
with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of
concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of
elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two
coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete
application/system not less than 500 microns). The operation shall be carried out
after scrapping and properly cleaning the surface to remove loose particles with
wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
Description
Details of cost for 10 Sqm
MATERIAL
Fibre reinforced elastomeric liquid water
proofing membrane
10.76 litre + 0.538 (Add wastage 5%)
= 11.30 litre
LABOUR
Coolie
Painter
Wire brush brushes, rollers etc.
Sundries
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
litre
11.30
198.69
2245.20
L.S.
1.43
1.73
2.47
day
day
L.S.
L.S.
0.67
0.67
6.76
8.06
368.00
448.00
1.73
1.73
246.56
300.16
11.69
13.94
2820.02
28.20
2848.22
427.23
3275.45
327.54
327.55
22.23
Providing and applying integral crystalline slurry of hydrophilic in nature for

waterproofing treatment to the RCC structures like retaining walls of the basement,
water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels
/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts
integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts
integral crystalline slurry : 1 part water) for horizontal surfaces and applying the
same from negative (internal) side with the help of synthetic fiber brush. The material
shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing
permeability of concrete by more than 90% compared with control concrete as per
DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline
slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work
shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any
leakage.
22.23.1
For vertical surface two coats @0.70 kg per sqm
Code
0351
Description
Details of cost for 1 .00 sqm
MATERIAL :
Integral crystalline slurry
(2 x .70kg / sq.mtr. = 1.40kg)
1562
Unit
Quantity
kg
1.40
Rate
270.00
Amount
378.00
Code
9999
9999
9999
22.23.2
Code
0351
9999
9999
9999
22.23A
Code
8512
9977
0115
0131
9999
Description
LABOUR
For application of waterproofing material
Sundries
TOTAL
Add 1% Water Charges
TOTAL
Cost for 1.00 sqm
Say
Unit
Quantity
L.S.
L.S.
L.S.
11.55
1.15
1.75
Rate
1.73
1.73
1.73
Amount
19.98
1.99
3.03
403.00
4.03
407.03
61.05
468.08
468.10
For horizontal surface one coat @1.10 kg per sqm.

Description
Details of cost for 1 .00 sqm
MATERIAL :
Integral crystalline slurry
(1 x 1.10kg / sq.mtr. = 1.10kg)
LABOUR :
For application of waterproofing material
Sundries
TOTAL
Add 1% Water Charges
TOTAL
Cost for 1.00 sqm
Say
Unit
Quantity
Rate
Amount
kilogram
1.10
270.00
297.00
L.S.
L.S.
L.S.
5.75
1.15
1.75
1.73
1.73
1.73
9.95
1.99
3.03
311.96
3.12
315.08
47.26
362.35
362.35
Providing & Applying polymer modified, flexible cementatious negative side

waterproofing coating with elastic waterproofing polymers on interior wall plaster
surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious
waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of
cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after
scrapping and properly cleaning the surface to remove pre-existing paint film &
loose particles till plaster is visible, complete in all respect as per the direction of
Engineer-in-Charge.
Description
MATERIAL
Cementitious water proofing coating with
elastic polymers
14.35 kg + 0.72 (Add wastage 5%)
= 15.07 litre
LABOUR
Coolie
Painter
Wire brush brushes, rollers etc.
1563
Unit
Quantity
Rate
Amount
kg
15.07
189.13
2850.19
L.S.
1.56
1.73
2.70
day
day
L.S.
0.23
0.46
7.15
368.00
448.00
1.73
84.64
206.08
12.37
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
L.S.
8.06
22.24
Code
0354
9999
9999
9999
22.24A
Code
8513
Rate
1.73
Amount
13.94
3169.92
31.70
3201.62
480.24
3681.86
368.18
368.20
Providing and applying integral crystalline (dry shake) of hydrophilic in nature for
waterproofing treatment to the RCC structures like basement raft, foundation slab,
sewage & water treatment plant slab, warehouses floor, parking structures and water
tank base slab etc. sprinkled @0.60kg per sqm or higher as recommended by the
manufacturer's specification over the lean concrete of above cited structures. The
material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing
permeability of concrete by more than 85%, compared control concrete as per DIN
1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline dryshake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall
be carried out all complete as per specification and the direction of the Engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage.
Description
MATERIAL :
Integral crystalline dry shake
LABOUR
For measuring and sprinkling of
waterproofing material
Sundries
TOTAL
TOTAL
Cost for 1.00 sqm
Say
Unit
Quantity
Rate
Amount
kilogram
0.60
412.00
247.20
L.S.
L.S.
L.S.
11.55
1.15
1.75
1.73
1.73
1.73
19.98
1.99
3.03
272.20
2.72
274.92
41.24
316.16
316.15
Providing & Applying high quality acrylic modified resin based texture of Dholpur/
Red sand stone Pattern with anti algae and UV resistance properties to be applied
as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5
mm thickness after scrapping and properly cleaning the surface to remove loose
particles from the plaster surface, followed by top coating with Premium Acrylic
Smooth exterior paint with Silicone additives of required shade by two or more
coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge.
Description
MATERIAL
Acrylic modified resin based texture
43.04 kg + 2.15 (Add wastage 5%) = 45.19 kg
1564
Unit
Quantity
kg
45.19
Rate
48.89
Amount
2209.34
Code
14.67.1
9977
0115
0123
9999
Description
Quantity taken for cost using once = 10 sqm
Top coat with premium acrylic exterior
paint (two or more coats)
SH:REPAIRS TO BUILDINGS
LABOUR
Coolie
Sundries and scaffolding
TOTAL
i.e. on (3471.59 - 707.50) = 2764.09
TOTAL
- 707.50) = 2791.73
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
L.S.
10.00
3.90
70.75
1.73
707.50(A)
6.75
day
day
L.S.
0.56
0.56
40.00
368.00
487.00
1.73
206.08
272.72
69.20
3471.59
27.64
3499.23
418.76
3917.99
391.79
391.80
22.25
Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts
crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks,
tie rod holes and spalled & honeycombed surface of RCC underground structures
like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie
mortar shall conform to the EN 1504-3 having compressive strength Class R4 (?45
MPa) and adhesive bond strength Class R3 (?1.5 MPa). The work shall be carried out
all complete as per specification and the direction of the engineer-in-charge. The
product performance shall carry guarantee for 10 years against any leakage.
22.25.1
For sealing cracks and faulty construction joints, routed out/making U-shape groove
size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/running
meter and while the surface is tacky filled the groove upto surface with crystalline
mortar @1.50kg/running meter. Once crystalline mortar is touch dry then finally applied
two coats of integral crystalline slurry @0.05kg/running meter per coat.
Code
0353
0351
9999
9999
9999
Description
MATERIAL :
Crystalline Mortar @1.50 kg per meter
Integral crystalline slurry for priming and
finishing
(3 x 0.05kg / meter) = 0.15kg
LABOUR
For making crystalline mortar and repair
work etc..
Sundries
TOTAL
TOTAL
Cost for 1.00 meter
Say
1565
Unit
Quantity
Rate
Amount
kilogram
1.50
248.00
372.00
kilogram
0.150
270.00
40.50
L.S.
L.S.
L.S.
14.450
1.150
1.750
1.73
1.73
1.73
25.00
1.99
3.03
442.52
4.43
446.94
67.04
513.98
514.00
22.25.2
Code
0353
9999
9999
9999
22.26
Code
0355
0356
9999
9999
9999
For patching of tie rod holes, prepared tie rod hole surface and then primed the
area with integral crystalline slurry @0.070kg/sqm and while the surface is tacky
repair and then filled the tie rod holes with crystalline mortar@0.040kg per hole.
The crystalline mortar should be tightly rodded into tie rod holes or packed tightly
(For 25x25x25 mm tie rod hole, use 0.040kg to fill the hole)
Description
Details of cost for 1 no. hole
MATERIAL :
Crystalline mortar@0.040 kg per hole
LABOUR
For making crystalline mortar and repair
work etc..
Sundries
TOTAL
TOTAL
Cost for each hole
Say
Unit
Quantity
Rate
Amount
kilogram
0.04
248.00
9.92
L.S.
L.S.
L.S.
2.90
0.30
0.25
1.73
1.73
1.73
5.02
0.52
0.43
15.89
0.16
16.05
2.41
18.45
18.45
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in
linear meter (expansive nature) for construction joints treatment of RCC structure
such as raft slab, retaining walls, water storage tank and at the junctions of raft
slab with the retaining walls etc.. After cleaning the surface, one coat of required
primer for swellable water stop tape shall be applied throughout the length of the
joint @3.78 litre per 240 running meter. Over the primed surface swellable type
water stop tape shall be placed. The work shall be carried out all complete as per
specification and the direction of the engineer-in-charge. The product performance
shall carry guarantee for 10 years against any leakage.
Description
MATERIAL :
Swellable type water stop tape
(Crystalline sealing compound)
Swellable type water stop primer
(@3.78 litre per 240 running meter)
LABOUR
For application of primer and swellable
water stop
Sundries
TOTAL
TOTAL
Cost for 1.00 metre
Say
1566
Unit
Quantity
Rate
Amount
metre
Litre
1.00
0.016
416.00
1750.00
416.00
28.00
L.S.
L.S.
L.S.
8.65
1.15
1.75
1.73
1.73
1.73
14.96
1.99
3.03
463.98
4.64
468.62
70.29
538.91
538.90
SUB HEAD : 23.0
RAIN WATER HARVESTING &

TUBEWELLS
1567
23.1
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method
prescribed in IS: 2800 (part I), including collecting samples from different strata,
preparing and submitting strata chart/ bore log, including hire & running charges
of all equipments, tools, plants & machineries required for the job, all complete as
per direction of Engineer-in-charge, upto 90 metre depth below ground level.
23.1.1
All types of soil
23.1.1.1
300 mm dia
Code
0020
0005
0114
0130
7763
0114
0113
23.1.1.2
Code
0020
0005
0114
0130
7763
0114
0113
Description
MACHINERY :
Hydraulic Excavator (3D) with driver and fuel.
Hire charges of Diesel Truck - 9 tonne
Transportation charges for to and fro to site
(assume 140m of bore for one shifting) (2
x30)/140
Loading, unloading &Errection charges of
drilling Rig Machine
LABOUR
Beldar
Mistry
Water supply tanker of 5000 litre capacity
Extra labour to assist M/C operator & security
Beldar
Chowkidar
TOTAL
TOTAL
Cost for 35 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
day
day
1.00
0.4286
6500.00
2000.00
6500.00
857.20
day
day
each
4.00
1.00
1.00
368.00
487.00
750.00
1472.00
487.00
750.00
day
day
2.00
1.00
368.00
368.00
736.00
368.00
11170.20
111.70
11281.90
1692.29
12974.19
370.69
370.70
Unit
Quantity
day
day
1.00
0.4286
6500.00
2000.00
6500.00
857.20
day
day
each
4.00
1.00
1.00
368.00
487.00
750.00
1472.00
487.00
750.00
day
day
2.00
1.00
368.00
368.00
736.00
368.00
11170.20
111.70
11281.90
1692.29
12974.19
405.44
405.45
350 mm dia
Description
MACHINERY :
x30)/140
LABOUR
Beldar
Mistry
Beldar
Chowkidar
TOTAL
TOTAL
Cost for 32 metre
Cost of 1 metre
Say
SUB HEAD : 23- RAIN WATER HARVESTING & TUBEWELLS
1569
Rate
Amount
23.1.1.3
Code
0020
0005
0114
0130
7763
0114
0113
400 mm dia
Description
MACHINERY :
(assume 140m of bore for one shifting)
(2 x30)/140
LABOUR
Beldar
Mistry
Extra labour to assist M/C operator &
security
Beldar
Chowkidar
TOTAL
TOTAL
Cost for 25 metre
Cost of 1 metre
Say
23.1.2
Rocky strata including Boulders
23.1.2.1
300 mm dia
Code
0020
1235
0005
0114
0130
7763
0134
0114
0103
0113
Description
MACHINERY :
Diesel oil
Extra diesel required for boring in rocky
strata
(2 x30)/140
LABOUR
Beldar
Mistry
Rock Hole Driller
Beldar
Chowkidar
TOTAL
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
1570
Unit
Quantity
Rate
day
day
1.00
0.4286
6500.00
2000.00
6500.00
857.20
day
day
each
4.00
1.00
1.00
368.00
487.00
750.00
1472.00
487.00
750.00
day
day
2.00
1.00
368.00
368.00
736.00
368.00
11170.20
111.70
11281.90
1692.29
12974.19
518.96
518.95
Unit
Quantity
day
litre
0.90
6.00
6500.00
46.55
5850.00
279.30
day
0.4286
2000.00
857.20
day
day
each
4.00
1.00
1.00
368.00
487.00
750.00
1472.00
487.00
750.00
day
day
day
day
0.75
3.00
0.75
1.00
368.00
368.00
448.00
368.00
276.00
1104.00
336.00
368.00
11779.50
117.80
11897.30
1784.60
13681.90
855.11
855.10
Rate
Amount
Amount
23.1.2.2
Code
0020
1235
0005
0114
0130
7763
0134
0114
0103
0113
23.1.2.3
Code
0020
1235
0005
0114
0130
7763
0134
0114
0103
0113
350 mm dia
Description
MACHINERY :
Diesel oil
Extra diesel required for boring in rockystrata
(2 x30)/140Loading, unloading &Errection
charges of drilling Rig Machine
LABOUR
Beldar
Mistry
Extra labour to assist M/C operator &security
Rock Hole Driller
Beldar
Chowkidar
TOTAL
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
day
litre
0.90
8.00
6500.00
46.55
5850.00
372.40
day
0.4286
2000.00
857.20
day
day
each
4.00
1.00
1.00
368.00
487.00
750.00
1472.00
487.00
750.00
day
day
day
day
1.00
4.00
0.75
1.00
368.00
368.00
448.00
368.00
368.00
1472.00
336.00
368.00
12332.60
123.33
12455.93
1868.39
14324.32
895.27
895.25
Unit
Quantity
day
litre
0.90
16.00
6500.00
46.55
5850.00
744.80
day
0.4286
2000.00
857.20
day
day
each
4.00
1.00
1.00
368.00
487.00
750.00
1472.00
487.00
750.00
day
day
day
day
1.20
8.00
0.75
1.00
368.00
368.00
448.00
368.00
441.60
2944.00
336.00
368.00
14250.60
142.51
14393.11
2158.97
16552.08
1034.50
1034.50
400 mm dia
Description
MACHINERY :
Diesel oil
x30)/140Loading, unloading &Errection
LABOUR
Beldar
Mistry
Rock Hole Driller
Beldar
Chowkidar
TOTAL
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
1571
Rate
Amount
23.2
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable
method prescribed in IS: 2800 (part I), including collecting samples from
different strata, preparing and submitting strata chart/ bore log, including hire
& running charges of all equipments, tools, plants & machineries required for
the job, all complete as per direction of Engineer -in-charge, beyond 90 metre
& upto 150 metre depth below ground level.
23.2.1
All types of soil
23.2.1.1
300 mm dia
Code
0020
0005
0114
0130
7763
0114
0113
23.2.1.2
Code
0020
0005
0114
0130
7763
0114
0113
Description
MACHINERY :
LABOUR
Beldar
Mistry
Beldar
Chowkidar
TOTAL
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
day
day
1.00
0.4286
6500.00
2000.00
6500.00
857.20
day
day
each
4.00
1.00
1.00
368.00
487.00
750.00
1472.00
487.00
750.00
day
day
2.00
1.00
368.00
368.00
736.00
368.00
11170.20
111.70
11281.90
1692.29
12974.19
432.47
432.45
Unit
Quantity
day
day
1.00
0.4286
6500.00
2000.00
6500.00
857.20
day
day
each
4.00
1.00
1.00
368.00
487.00
750.00
1472.00
487.00
750.00
day
day
2.00
1.00
368.00
368.00
736.00
368.00
11170.20
111.70
11281.90
1692.29
12974.19
480.52
480.50
350 mm dia
Description
MACHINERY :
LABOUR
Beldar
Mistry
Beldar
Chowkidar
TOTAL
TOTAL
Cost for 27 metre
Cost of 1 metre
Say
1572
Rate
Amount
23.2.1.3
Code
0020
0005
0114
0130
7763
0114
0113
400 mm dia
Description
MACHINERY :
LABOUR
Beldar
Mistry
Beldar
Chowkidar
TOTAL
TOTAL
Cost for 20 metre
Cost of 1 metre
Say
23.2.2
Rocky strata including Boulders
23.2.2.1
300 mm dia
Code
0020
1235
0005
0114
0130
7763
0134
0114
0103
0113
Description
MACHINERY :
Diesel oil
LABOUR
Beldar
Mistry
Rock Hole Driller
Beldar
Chowkidar
TOTAL
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
1573
Unit
Quantity
Rate
day
day
1.00
0.4286
6500.00
2000.00
6500.00
857.20
day
day
each
4.00
1.00
1.00
368.00
487.00
750.00
1472.00
487.00
750.00
day
day
2.00
1.00
368.00
368.00
736.00
368.00
11170.20
111.70
11281.90
1692.29
12974.19
648.70
648.70
Unit
Quantity
day
litre
0.90
10.00
6500.00
46.55
5850.00
465.50
day
0.4286
2000.00
857.20
day
day
each
4.00
1.00
1.00
368.00
487.00
750.00
1472.00
487.00
750.00
day
day
day
day
1.00
5.00
0.70
1.00
368.00
368.00
448.00
368.00
368.00
1840.00
313.60
368.00
12771.30
127.71
12899.01
1934.85
14833.86
927.11
927.10
Rate
Amount
Amount
23.2.2.2
Code
0020
1235
0005
0114
0130
7763
0134
0114
0103
0113
23.2.2.3
Code
0020
1235
0005
0114
0130
7763
0134
0114
0103
0113
350 mm dia
Description
MACHINERY :
Diesel oil
LABOUR
Beldar
Mistry
Rock Hole Driller
Beldar
Chowkidar
TOTAL
TOTAL
Cost for 16 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
day
litre
0.90
12.00
6500.00
46.55
5850.00
558.60
day
0.4286
2000.00
857.20
day
day
each
4.00
1.00
1.00
368.00
487.00
750.00
1472.00
487.00
750.00
day
day
day
day
1.00
6.00
0.75
1.00
368.00
368.00
448.00
368.00
368.00
2208.00
336.00
368.00
13254.80
132.55
13387.35
2008.10
15395.45
962.21
962.20
Unit
Quantity
day
litre
0.95
16.00
6500.00
46.55
6175.00
744.80
day
0.4286
2000.00
857.20
day
day
each
4.00
1.00
1.00
368.00
487.00
750.00
1472.00
487.00
750.00
day
day
day
day
1.20
8.00
1.00
1.00
368.00
368.00
448.00
368.00
441.60
2944.00
448.00
368.00
14687.60
146.88
14834.48
2225.17
17059.65
1218.54
1218.55
400 mm dia
Description
MACHINERY :
Diesel oil
LABOUR
Beldar
Mistry
Rock Hole Driller
Beldar
Chowkidar
TOTAL
TOTAL
Cost for 14 metre
Cost of 1 metre
Say
1574
Rate
Amount
23.3
Supplying, assembling, lowering and fixing in vertical position in bore well,

unplasticized PVC medium well casing (CM) pipe of required dia, conforming
to IS: 12818, including required hire and labour charges, fittings & accessories
etc. all complete, for all depths, as per direction of Engineer -in-charge.
23.3.1
100 mm nominal size dia
Code
7758
2321
0114
0115
23.3.2
Code
7745
2321
0114
0115
9999
23.3.3
Code
7746
2322
Description
Unit

MATERIAL
uPVC blind pipe 100 mm dia as per IS: 12818
metre
150 mm dia
100 metre
Qty = 50 to consider 50% of carriage as
per 2321
LABOUR
for lowering
Beldar
day
Coolie
day
TOTAL
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
Quantity
Rate
Amount
100.00
244.00
24400.00
0.50
378.03
189.01
0.50
0.50
368.00
368.00
184.00
184.00
24957.01
249.57
25206.58
3780.99
28987.57
289.87
289.85

Description
Unit

MATERIAL
150 mm dia
Qty = 50 to consider 50% of carriage
as per 2321
LABOUR
for lowering
Beldar
Coolie
Sundries (Adhesive etc.)
TOTAL
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
metre
Quantity
Rate
Amount
100.00
487.00
48700.00
100 metre
0.50
378.03
189.01
day
day
L.S.
0.50
0.50
10.07
368.00
368.00
1.73
184.00
184.00
17.42
49274.43
492.74
49767.17
7465.08
57232.25
572.32
572.30
Description
Unit
Quantity

MATERIAL
200 mm dia
metre
1575
100 metre
Rate
Amount
100.00
519.00
51900.00
0.50
614.93
307.46
Code
0114
0115
Description
as per 2321
LABOUR
for lowering
Beldar
Coolie
TOTAL
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
Unit
Quantity
day
day
0.50
0.50
Rate
368.00
368.00
Amount
184.00
184.00
52575.46
525.75
53101.21
7965.18
61066.39
610.66
610.65
23.4
Supplying, assembling, lowering and fixing in vertical position in bore well

unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to
IS: 12818, including hire & labour charges, fittings & accessories etc. all
complete, for all depths, as per direction of Engineer-in-charge.
23.4.1
Code
7759
2321
0114
0115
9999
23.4.2
Code
7751
2321
0114
Description
Unit

MATERIAL
uPVC slotted pipe 100 mm dia as per
IS: 12818
150 mm dia
as per 2321
LABOUR
for lowering
Beldar
Coolie
TOTAL
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
metre
Quantity
Rate
Amount
100.00
380.00
38000.00
100 metre
0.50
378.03
189.01
day
day
L.S.
0.50
0.50
10.07
368.00
368.00
1.73
184.00
184.00
17.42
38574.43
385.74
38960.17
5844.03
44804.20
448.04
448.05
Unit
Quantity

Description
MATERIAL
IS: 12818
150 mm dia
as per 2321
LABOUR
for lowering
Beldar
metre
1576
Rate
Amount
100.00
450.00
45000.00
100 metre
0.50
378.03
189.01
day
0.50
368.00
184.00
Code
Description
Unit
Quantity
0115
9999
Coolie
TOTAL
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
day
L.S.
0.50
10.07
Unit
Quantity
23.4.3
Code
7752
2322
0114
0115
9999
23.5
Code
7753
0114
9999
Rate
368.00
1.73
Amount
184.00
17.42
45574.43
455.74
46030.17
6904.53
52934.70
529.34
529.35

Description
MATERIAL
IS: 12818
200 mm dia
as per 2321
LABOUR
for lowering
Beldar
Coolie
TOTAL
TOTAL
Cost of 100 metres
Cost of 1 metre
Say
metre
Rate
Amount
100.00
700.00
70000.00
100 metre
0.50
614.93
307.46
day
day
L.S.
0.50
0.50
13.42
368.00
368.00
1.73
184.00
184.00
23.22
70698.68
706.99
71405.67
10710.85
82116.52
821.16
821.15
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to

20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete
as per direction of Engineer-in-charge.
Description
MATERIAL
Boulder 50 mm to 200 mm
including carriage
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Total
Cost of 1 Cum.
Say
1577
Unit
Quantity
Rate
Amount
cum
1.00
700.00
700.00
day
L.S.
0.25
1.00
368.00
1.73
92.00
1.73
793.73
7.94
801.67
120.25
921.92
921.92
921.90
23.6
Code
7754
0114
9999
23.7
Code
7755
0114
9999
23.8
Code
7772
0114
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm,

in the recharge pit, over the existing layer of boulders, in required thickness,
for all leads & lifts, all complete as per direction of Engineer-in-charge.
Description
MATERIAL
Gravel 5 mm to 10 mm
including carriage
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Total
Cost of 1 Cum.
Say
Unit
Quantity
Rate
Amount
cum
1.00
800.00
800.00
day
L.S.
0.25
1.00
368.00
1.73
92.00
1.73
893.73
8.94
902.67
135.40
1038.07
1038.07
1038.05
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2
mm in recharge pit, in required thickness over gravel layer, for all leads & lifts,
all complete as per direction of Engineer -in-charge.
Description
MATERIAL
Gravel 1.5 mm to 2 mm
including carriage
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Total
Cost of 1 Cum.
Say
Unit
Quantity
Rate
Amount
cum
1.00
800.00
800.00
day
L.S.
0.25
1.00
368.00
1.73
92.00
1.73
893.73
8.94
902.67
135.40
1038.07
1038.07
1038.05
Gravel packing in tubewell construction in accordance with IS: 4097, including

providing gravel fine/ medium/ coarse, in required grading & sizes as per actual
requirement, all complete as per direction of Engineer-in-charge.
Description
MATERIAL
Pea Gravel
including carriage
LABOUR
Beldar
1578
Unit
Quantity
Rate
Amount
cum
1.00
900.00
900.00
day
0.30
368.00
110.40
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Total
Cost of 1 Cum.
Say
L.S.
1.00
23.9
Code
7762
9988
Rate
1.73
Amount
1.73
1012.13
10.12
1022.25
153.34
1175.59
1175.59
1175.60
Providing and fixing factory made precast RCC perforated drain covers, having
concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced
with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars,
including providing 50 mm dia perforations @ 100 to 125 mm c/c, including
providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as
per direction of Engineer-in-charge.
Description
Details of cost for 1 No. RCC drain cover
MATERIAL
Precast R.C.C. perforated slab
LABOUR
Carriage and fixing charges
TOTAL
TOTAL
Total
Cost of 1 No.
Say
Unit
Quantity
Rate
Amount
each
1.00
800.00
800.00
L.S.
15.00
1.73
25.95
825.95
8.26
834.21
125.13
959.34
959.34
959.35
23.10

ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/
plain ended casing pipes of required dia, conforming to IS: 4270, of reputed &
approved make, including painted with outside surface with two coats of
anticorrosive paint of approved brand and manufacture, including required
hire & labour charges, fittings & accessories, all complete, for all depths, as
per direction of Engineer-in-charge.
23.10.1
100 mm nominal size dia having minimum wall thickness 5.00 mm
Code
7757
7764
2343
13.65.1
0114
Description
Unit

MATERIAL
M.S. pipe 100 mm dia casing pipe
M.S. socket 100 mm dia
Carriage of ductile iron pipes (k7) 100 mm dia
including loading and unloading Painting
with anticorrosive Paint 3.14 x.0110
x30.00=10.36 sqm.
Rate as per Item No.13.65.1 of SH:Finishing
LABOUR
Beldar
1579
Quantity
Rate
Amount
metre
each
100 metre
30.00
5.00
0.30
700.00
120.00
226.82
21000.00
600.00
68.05
sqm
10.36
65.20
675.47(A)
day
1.35
368.00
496.80
Code
Description
Unit
Quantity
0130
Mistry
TOTAL
i.e. on (23083.82 - 675.47) = 22408.35
TOTAL
= 22632.43
Cost for 30 metre
Cost of 1 metre
Say
day
0.50
23.10.2
Code
7743
7765
2344
13.65.1
0114
0130
23.10.3
Code
7744
7766
2345
13.65.1
0114
Rate
487.00
Amount
243.50
23083.82
224.08
23307.90
3394.86
26702.76
890.09
890.10

Description
Unit

MATERIAL
with Anticorrosive Paint 3.14 x0.160
x30.00=15.07 sqm.
LABOUR
Beldar
Mistry
TOTAL
i.e. on (31404.67 - 982.56) = 30422.11
TOTAL
= 30726.33
Cost for 30 metre
Cost of 1 metre
Say
Quantity
Rate
Amount
metre
each
100 metre
30.00
5.00
0.30
950.00
210.00
378.03
28500.00
1050.00
113.41
sqm
15.07
65.20
982.56(A)
day
day
1.40
0.50
368.00
487.00
515.20
243.50
31404.67
304.22
31708.89
4608.95
36317.84
1210.59
1210.60

Description
Unit

MATERIAL
with anticorrosive Paint 3.14 x0.210
x30.00=20.25 sqm.
LABOUR
Beldar
1580
Quantity
Rate
Amount
metre
each
100 metre
30.00
5.00
0.30
1200.00
270.00
614.93
36000.00
1350.00
184.48
sqm
20.25
65.20
1320.30(A)
day
1.35
368.00
496.80
Code
Description
Unit
Quantity
0130
Mistry
TOTAL
i.e. on (39595.08 - 1320.30) = 38274.78
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
day
0.50
Rate
487.00
Amount
243.50
39595.08
382.75
39977.83
5798.63
45776.46
1525.88
1525.90
23.11

ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size
1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A)
of required dia, conforming to IS: 8110, of reputed and approved make, having
wall thickness not less than 5.40 mm, including painted with outside surface
with two coats of anticorrosive bitumestic paint of approved brand and
manufacture, including hire & labour charges, fittings & accessories, all
complete, for all depths, as per direction of Engineer -in-charge.
23.11.1
Code
7757
7764
9999
2343
13.65.1
0114
0130
23.11.2
Code
7743
7765
Description
Unit

MATERIAL
Sundries
Carriage of ductile iron pipes (k7)
100 mm dia
x30.00=10.36 sqm
LABOUR
Beldar
Mistry
TOTAL
i.e. on (24651.27 - 675.47) = 23975.80
TOTAL
= 24215.56
Cost for 30 metre
Cost of 1 metre
Say
metre
each
L.S.
Quantity
Rate
Amount
30.00
5.00
906.04
700.00
120.00
1.73
21000.00
600.00
1567.45
100 metre
0.30
226.82
68.05
sqm
10.36
65.20
675.47(A)
day
day
1.35
0.50
368.00
487.00
496.80
243.50
24651.27
239.76
24891.03
3632.33
28523.36
950.77
950.75

Description
Unit

MATERIAL
metre
each
1581
Quantity
30.00
5.00
Rate
950.00
210.00
Amount
28500.00
1050.00
Code
Description
9999
2344
Extra for making slots

x30.00=15.07 sqm.
LABOUR
Beldar
Mistry
TOTAL
i.e. on (33494.60 - 982.56) = 32512.04
TOTAL
= 32837.16
Cost for 30 metre
Cost of 1 metre
Say
13.65.1
0114
0130
23.11.3
Code
7744
7766
9999
2345
13.65.1
0114
0130
23.12
Unit
L.S.
100 metre
Quantity
Rate
Amount
1208.05
0.30
1.73
378.03
2089.93
113.41
sqm
15.07
65.20
982.56(A)
day
day
1.40
0.50
368.00
487.00
515.20
243.50
33494.60
325.12
33819.72
4925.57
38745.29
1291.51
1291.50

Description
MATERIAL
Extra for making slots
with anticorrosive Paint 3.14 x 0.210
x30.00=20.25 sqm.
LABOUR
Beldar
Mistry
TOTAL
i.e. on (41703.41 - 1320.30) = 40383.11
TOTAL
Cost for 30 metre
Cost of 1 metre
Say
Unit
Quantity
Rate
Amount
metre
each
L.S.
100 metre
30.00
5.00
1208.05
0.30
1200.00
270.00
1.73
614.93
36000.00
1350.00
2089.93
184.48
sqm
20.25
65.20
1320.30(A)
day
day
1.40
0.50
368.00
487.00
515.20
243.50
41703.41
403.83
42107.24
6118.04
48225.28
1607.50
1607.50
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to
establish maximum rate of usable water yield without sand content (beyond
permissible limit), with required capacity air compressor, running the
compressor for required time till well is fully developed, measuring yield of
well by "V" notch method or any other approved method, measuring static
level & draw down etc. by step draw down method, collecting water samples
& getting tested in approved laboratory, i/c disinfection of tubewell, all
1582
complete, including hire & labour charges of air compressor, tools &
accessories etc., all as per requirement and direction of Engineer-in-charge.
Code
0040
1235
Description
Details of cost for 8 Hours
MACHINERY :
Air compressor 250 cfm with two leads
for pneumatic cutters/ hammers.
MATERIAL
Diesel oil
TOTAL
TOTAL
Cost of 8 Hours
Cost of 1 Hour
Say
Unit
Quantity
Rate
Amount
day
1.00
1500.00
1500.00
litre
48.00
46.55
2234.40
3734.40
37.34
3771.74
565.76
4337.50
542.18
542.20
23.13
Providing and fixing suitable size threaded mild steel cap or spot welded plate
to the top of bore well housing/ casing pipe, removable as per requirement, all
complete for borewell of:
23.13.1
100 mm dia
Code
7760
23.13.2
Code
7747
Description
MATERIAL
100mm dia MS screwed cap with locking
arrangement
M.S. cap 100 mm dia
Add 5% labour facor on X
TOTAL
TOTAL
Total
Cost of 1 No
Say
Unit
Quantity
each
1.00
Unit
Quantity
each
1.00
Rate
120.00
Amount
120.00
6.00
126.00
1.26
127.26
19.09
146.35
146.35
146.35
150 mm dia
Description
MATERIAL
arrangement
M.S. cap 150 mm dia
TOTAL
TOTAL
Total
Cost of 1 No
Say
1583
Rate
150.00
Amount
150.00
7.50
157.50
1.58
159.08
23.86
182.94
182.94
182.95
23.13.3
Code
7748
200 mm dia
Description
MATERIAL
arrangement
M.S. cap 200 mm dia
TOTAL
TOTAL
Total
Cost of 1 No
Say
Unit
Quantity
each
1.00
Rate
190.00
Amount
190.00
9.50
199.50
2.00
201.50
30.23
231.73
231.73
231.75
23.14
Providing and fixing M.S. clamp of required dia to the top of casing/ housing
pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of
required size complete.
23.14.1
100 mm clamp
Code
10.1
9999
23.14.2
Code
10.1
9999
Description
MATERIAL
Clamps made of MS flat of size 100x10mm
thick1x2mt.x7.80 kg per mt.=15.60 kg.
Rate as per Item No.10.1 of SH:Steel Work
Sundries, nuts and bolts etc.
TOTAL
i.e. on (955.07 - 911.82) = 43.25
TOTAL
= 43.68
Total
Cost of 1 No
Say
Unit
Quantity
kg
L.S.
15.60
25.00
Rate
58.45
1.73
Amount
911.82(A)
43.25
955.07
0.43
955.50
6.55
962.05
962.05
962.05
150 mm clamp
Description
MATERIAL
thick1x2.10 mt.x7.80 kg per mt.=16.38 kg.
TOTAL
i.e. on (1009.31 - 957.41) = 51.90
TOTAL
= 52.42
Total
Cost of 1 No
Say
1584
Unit
Quantity
kg
L.S.
16.38
30.00
Rate
58.45
1.73
Amount
957.41(A)
51.90
1009.31
0.52
1009.83
7.86
1017.69
1017.69
1017.70
23.14.3
Code
10.1
9999
200 mm clamp
Description
MATERIAL
thick1x2.40 mt.x7.80 kg per mt.=18.72 kg.
TOTAL
i.e. on (1146.08 - 1094.18) = 51.90
TOTAL
= 52.42
Total
Cost of 1 No
Say
Unit
Quantity
kg
L.S.
18.72
30.00
Rate
Amount
58.45 1094.18(A)
1.73
51.90
1146.08
0.52
1146.60
7.86
1154.46
1154.46
1154.45
23.15
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of
pipe assembly of tubewell as per IS:2800 (part I).
23.15.1
100 mm dia
Code
7761
9999
23.15.2
Code
7749
9999
Description
MATERIAL
M.S. bail plug 100 mm dia
Sundries
TOTAL
TOTAL
Total
Cost of 1 No
Say
Unit
Quantity
each
L.S.
1.00
5.00
Unit
Quantity
each
L.S.
1.00
5.00
Rate
150.00
1.73
Amount
150.00
8.65
158.65
1.59
160.24
24.04
184.28
184.28
184.30
150 mm dia
Description
MATERIAL
M.S bail plug 150 mm dia
Sundries
TOTAL
TOTAL
Total
Cost of 1 No
Say
1585
Rate
190.00
1.73
Amount
190.00
8.65
198.65
1.99
200.64
30.10
230.74
230.74
230.75
23.15.3
Code
7750
9999
200 mm dia
Description
MATERIAL
M.S bail plug 200 mm dia
Sundries
TOTAL
TOTAL
Total
Cost of 1 No
Say
1586
Unit
Quantity
each
L.S.
1.00
5.00
Rate
210.00
1.73
Amount
210.00
8.65
218.65
2.19
220.84
33.13
253.97
253.97
253.95
SUB HEAD : 24.0
CONSERVATION
OF
HERITAGE BUILDINGS
1587
24.1
Code
0114
0115
0101
9999
24.2
Raking out joints of stone masonry surface to the required width and depth,
with due care and precaution, by mechanical / manual means, including
preparing and cleaning the surface for re-pointing/ refilling of joints, including
disposal of rubbish to the dumping ground within 50 metre lead.
Description
LABOUR
Beldar
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
day
day
day
L.S.
0.53
0.08
0.07
1.43
Rate
368.00
368.00
407.00
1.73
Amount
195.04
29.44
28.49
2.47
255.44
2.55
257.99
38.70
296.69
29.66
29.65
Providing and fixing double scaffolding system (cup lock type) on the exterior
side of building/structure, upto 25 metre height, above ground level, including
additional rows of scaffolding in stepped manner as per requirement of site,
made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal &
vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis,
M.S. clamps and staircase system in the scaffolding for working platform etc.
and maintaining it in a serviceable condition for execution of work of cleaning
and/ or pointing and/ or applying chemical and removing it thereafter. The
scaffolding system shall be stiffened with bracings, runners, connecting with
the building etc, wherever required, if feasible, for inspection of work at
required locations with essential safety features for the workmen etc., complete
as per directions and approval of Engineer-in-charge.
Note:- (1) The elevational area of the scaffolding shall be measured for
payment purpose.
(2) The payment will be made once only for execution of all items for such
works.
Code
7397
Description
Details of cost for area 2.5x9.0=202.50 sqm
MATERIAL
unserviceable after use of 40 times Adding
for maintenance @ 10% of cost
Taking slvage value after full use of
material @ 25% of cost
Base jack
Qty taken for cost of using once
=14x0.85/40=0.2975
SUB HEAD : 24- CONSERVATION OF HERITAGE BUILDINGS
Unit
Quantity
each
0.30
1589
Rate
150.00
Amount
45.00
Code
Description
4009
Mild steel tubes hot finished welded type

Vertical standard 2.5m length=7x2x9x2.5=
315.00 mSide support 6.00m
length=3x2x6.00=36.00mHorizonatal
support
3.00mlength=18x3x3.00=162.00mTotal=1026.00m
@ 3.67 kg/m =3765.42 kgQty taken for
cost of using once= 3765.42x0.85/
40=80.02kg
Spigot for standard jointing
7x2x9=126 nos x 0.40m length = 50.40m
@2.46kg /m=123.98kgQty taken for cost of
using once= 123.98x0.85/40=2.63kg
2x7x2x9=252 nos @ 0.15 kg each=37.80
kg =0.378qQty taken for cost of using
once= 0.378x0.85/40=0.008q
Double coupler
Clamp coupler for fixing MS tube with
scafolding 2x3x2+2x18x3=120 nosQty
taken for cost of using once= 120x0.85/
40=2.55 nos
Challies
3 nos x 18 lines=54 nosTwo level plate
challies=2x18 lines=36nosTotal=90 nosQty
taken for cost of using once=90x0.85/
40=1.9125 nos
Cup lock
For Vertical standards=(5x7x2x9=630 nos)
+(2x18x19=694 nos)Total=1314 nosQty
taken for cost of using once= 1314x0.85/
40=27.92
Carriage of Steel
40mm dia MS pipe=3765.42kg25mm
spigot=123.98kgNuts &
bolts=37.80kgclamp=120 nos@1.00kg
each=120.00kgChallies=90 nos @ 15.00kg
each=1350.00kgCup locks=1314 nos @
0.50kg each=
657.00kgTotal=6054.20kg=6.054 tonne
LABOUR
Fitter (grade 1)
Beldar
Sundries
TOTAL
TOTAL
Cost of 202.50 sqm
Cost of 1.00 sqm
Say
7387
1034
7346
7398
7399
2205
0116
0114
9999
Unit
Quantity
kilogram
80.02
42.00
3360.84
kg
2.63
45.00
118.35
quintal
0.008
5100.00
40.80
each
2.555
48.00
122.64
each
1.91
800.00
1528.00
each
27.92
50.00
1396.00
tonne
6.054
92.24
558.41
15.50
31.00
1035.00
487.00
368.00
1.73
7548.50
11408.00
1790.55
27917.09
279.17
28196.26
4229.44
32425.70
160.12
160.10
1590
day
day
L.S.
Rate
Amount
24.3
Code
7767
7771
0103
0114
0128
9999
6501
0103
0114
0128
24.4
Code
7775
0103
Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease,
oil, algae, fungus, monkey beats, vegetable growth etc., including providing,
applying and washing the surface with liquid Ammonia Chemical of 5%
solution and other chemical cleaning agent as approved by Archaeological
Survey of India/ Engineer-in-charge, of approved brand and manufacturer,
with the help of required scrubbers and also cleaning with machine operated
water jet mixed with desired quantity of fine silica where ever required, without
causing any scratching/ damage to the stone surface and finally washing the
surface with clean water with the help of pressure jet machine, complete in all
respect, including taking all precautions to safeguard ventilators, windows,
doors etc. by suitable covering so as to avoid any damage to the building/
structure, all as per direction of Engineer-in-charge (The rate is inclusive of
all materials & labours involved except scaffolding).
Description
MATERIAL
Stone cleaning chemical approved by ASI
1 kg teepal of 3% solution for 10 sqm area
for 10sqm = 0.10 liter
Liquid Amonia 5%
LABOUR (for applying the camical Salution)
Beldar
Mate
Cleaning T & P & its manitinance cost (Jet
Pump, electrice cable, horse pipe, waler
pipe, Nozel safety belt Rope & mantance
cost and safety machine for window etc.)
LABOUR (for pressure cleaning)
Beldar
Mate
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
0.10
165.00
16.50
litre
0.17
161.00
27.37
day
day
day
0.20
0.20
0.10
448.00
368.00
407.00
89.60
73.60
40.70
L.S.
cum
1.00
0.0283
1.73
600.00
1.73
16.98
day
day
day
0.40
0.80
0.10
448.00
368.00
407.00
179.20
294.40
40.70
780.78
7.81
788.59
118.29
906.88
90.68
90.70
Providing and applying antifungal wash treatment using 3% solution of sodium

pentachlorophenate, of reputed brand and manufacturer, on cleaned sand
stone surface at desired locations as per direction of Engineer-in-charge (The
rate is inclusive of all materials & labours involved except scaffolding).
Description
MATERIAL
Sodium pentachlorophenate
LABOUR
1591
Unit
Quantity
Rate
Amount
Kg
0.10
630.00
63.00
day
0.25
448.00
112.00
Code
Description
Unit
Quantity
0114
0128
Beldar
Mate
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
day
day
0.25
0.125
24.5
Code
3.19
0155
0115
0101
9999
24.6
Code
3.19
0155
0115
0101
Rate
368.00
407.00
Amount
92.00
50.88
317.88
3.18
321.06
48.16
369.22
36.92
36.90
Ruled / Flush pointing on Red sand stone masonry surface with lime, surkhi
and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5 surkhi (50% red
and 50% light yellow surkhi ) : 1/2 marble dust}. (The rate is inclusive of all
materials & labours involved except scaffolding).
Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.023
2429.95
55.89
day
day
day
L.S.
0.92
1.37
0.93
4.03
467.00
368.00
407.00
1.73
429.64
504.16
378.51
6.97
1375.17
13.75
1388.92
208.34
1597.26
159.72
159.70
Ruled/ Flush pointing on White sand stone masonry surface with lime, surkhi
and marble dust mortar in the ratio of 1:1.5:1/2 {One lime : 1.5 surkhi (15%
dark red and 85% light yellow surkhi) : 1/2 marble dust}. (The rate is inclusive
of all materials & labours involved except scaffolding).
Description
MATERIAL
LABOUR
Mason (average)
Coolie
Bhisti
1592
Unit
Quantity
Rate
Amount
cum
0.023
2429.95
55.89
day
day
day
0.92
1.37
0.93
467.00
368.00
407.00
429.64
504.16
378.51
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
L.S.
4.03
24.7
Code
7769
0131
0114
9999
24.8
Code
7768
7770
Rate
1.73
Amount
6.97
1375.17
13.75
1388.92
208.34
1597.26
159.72
159.70
Applying two or more coat of Ethyl Silicate chemical as approved by

Archaeological Survey of India/ Engineer-in-charge, of approved brand and
manufacturer, with brush or spray on the existing stone masonry surface till
there is no further absorption of chemical by stone surface, including
protecting the applied surface from direct sunlight by suitable means during
application, all complete as per direction of the Engineer-in-Charge (The rate
is inclusive of all materials & labours involved except scaffolding).
Description
MATERIAL
Stone surface strengthening chemical
approved by ASI
LABOUR
Painter
Beldar
Sundries
TOTAL
TOTAL
Cost of 5.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
litre
1.00
1020.00
1020.00
day
day
L.S.
0.15
0.15
6.00
448.00
368.00
1.73
67.20
55.20
10.38
1152.78
11.53
1164.31
174.65
1338.96
267.79
267.80
Applying breathable, non-reactive, antifungal, and water repellant Silane/

Siloxane chemical as approved by Archaeological Survey of India/ Engineerin-charge, of approved brand and manufacture, diluted with solvent mineral
Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of
Turpentine oil), on the existing sand stone masonry surface with two or more
coats to give uniform application of chemical on the surface, all complete as
per direction of Engineer-In-charge (The rate is inclusive of all materials &
labours involved except scaffolding).
Description
Unit
Quantity

MATERIAL
Water repallent chemical approved by ASI
Turpentine oil
litre
litre
1.00
12.00
1593
Rate
650.00
55.00
Amount
650.00
660.00
Code
0131
0114
9999
Description
LABOUR
Painter
Beldar
Handling / Transportation charges
TOTAL
TOTAL
Cost of 45.00 sqm
Cost of 1.00 sqm
Say
1594
Unit
Quantity
day
day
L.S.
1.00
1.00
6.00
Rate
448.00
368.00
1.73
Amount
448.00
368.00
10.38
2136.38
21.36
2157.74
323.66
2481.40
55.14
55.15
SUB HEAD : 25.0
STRUCTURAL GLAZING
ALUMINIUM COMPOSITE PANEL
1595
25.1
Code
7306
7392
25.2
Providing and supplying aluminium extruded tubular and other aluminium

sections as per the architectural drawings and approved shop drawings , the
aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super
durable powder coating of 60-80 microns conforming to AAMA 2604 of required
colour and shade as approved by the Engineer-in-Charge. ( The item includes
cost of material such as cleats, sleeves, screws etc. necessary for fabrication
of extruded aluminium frame work. Nothing extra shall be paid on this account).
Description
Unit

Width of the unit 1.6 m
Height of the unit 4.2 m
Area of Single Unit 6.72 sqm
Total Area 6.72 sqm, No of Panels 1 no
Aluminium Weight per sqm = 6.50 Kg/m2
Vision Height 2.2 m
Add for cleats, sleeves, screws etc.
@5% = 0.33 kg
Add wastage @ 5% = 0.34 kg
Total = 7.17 kg
MATERIALS
sections
TOTAL
TOTAL
Cost for 6.5 kg
Cost for 1 kg
Say
Quantity
Rate
Amount
kilogram
7.17
200.00
1434.00
kilogram
7.17
64.00
458.88
1892.88
18.93
1911.81
286.77
2198.58
338.24
338.25
Designing, fabricating, testing, protection, installing and fixing in position

semi (grid) unitized system of structural glazing (with open joints) for linear
as well as curvilinear portions of the building for all heights and all levels,
including:
(a) Structural analysis & design and preparation of shop drawings for the
specified design loads conforming to IS 875 part III (the system must passed
the proof test at 1.5 times design wind pressure without any failure), including
functional design of the aluminum sections for fixing glazing panels of various
thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws,
toggles, nuts, bolts, clamps etc., structural and weather silicone sealants,
flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets
for water tightness, pressure equalisation & drainage and protection against
fire hazard including:
(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium
alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to
accommodate 3 Dimentional movement for achieving perfect verticality and
SUB HEAD : 25- STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL
1597
fixing structural glazing system rigidly to the RCC/ masonry/structural steel

framework of building structure using stainless steel anchor fasteners/ bolts,
nylon seperator to prevent bimetallic contacts with nuts and washers etc. of
stainless steel grade 316, of the required capacity and in required numbers.
(c) Providing and filling, two part pump filled, structural silicone sealant and
one part weather silicone sealant compatible with the structural silicone sealant
of required bite size in a clean and controlled factory / work shop environment,
including double sided spacer tape, setting blocks and backer rod, all of
approved grade, brand and manufacture, as per the approved sealant design,
within and all around the perimeter for holding glass.
(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm
thick and of sizes, shapes and profiles, as required as per the site conditions,
to seal the gap between the building structure and all its interfaces with curtain
glazing to make it watertight.
(e) Making provision for drainage of moisture/ water that enters the curtain
glazing system to make it watertight, by incorporating principles of pressure
equalization, providing suitable gutter profiles at bottom (if required), making
necessary holes of required sizes and of required numbers etc. complete.
This item includes cost of all inputs of designing, labour for fabricating and
installation of aluminium grid, installation of glazed units, T&P, scaffolding
and other incidental charges including wastages etc., enabling temporary
structures and services, cranes or cradles etc. as described above and as
specified. The item includes the cost of getting all the structural and functional
design including shop drawings checked by a structural designer, dully
approved by Engineer-in-charge. The item also includes the cost of all mock
ups at site, cost of all samples of the individual components for testing in an
approved laboratory, field tests on the assembled working structural glazing
as specified, cleaning and protection till the handing over of the building for
occupation. In the end, the Contractor shall provide a water tight structural
glazing having all the performance characteristics etc. all complete as required,
as per the Architectural drawings, as per item description, as specified, as
per the approved shop drawings and as directed by the Engineer- in-Charge.
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes,
extruded aluminium section capping for fixing in the grooves of the curtain
glazing and vermin proof stainless steel wire mesh shall be paid for separately
under relevant items under this sub- head. However, for the purpose of
payment, only the actual area of structural glazing (including width of grooves)
on the external face shall be measured in sqm. up to two decimal places.
Note:-2. The following performance test are to be conducted on structural
glazing system if area of structural glazing exceeds 2500 Sqm from the
certified laboratories accreditated by NABL(National Accreditation Board for
Testing and Calibration Laboratories), Department of Science & Technologies,
India. Cost of testing is payable separately.
The NIT approving authority will decide the necessity of testing on the basis
of cost of the work, cost of the test and importance of the work. Performance
Testing of Structural glazing system Tests to be conducted in the NBL Certified
laboratories
1598
1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) &
(+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing
limit 1 to 200 mVhr
2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing
method for a range up to 2000 ml.
3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing
method for a range upto 2000 ml
4. Structural Performance Deflection and deformation by static air pressure
test (1.5 times desing wind pressure without any failure) as per ASTME-33010 testing method for a range upto 50 mm
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method
for Qualitative test Tests to be conducted on site.
6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)
upto 2000 ml
Code
2605
2606
2607
2608
2609
2610
2611
2612
2613
2630
2614
2632
2615
2616
8654
9999
9999
9999
9999
9999
9999
Description
Unit

Aluminium Weight per sqm = 6.50 Kg/sqm
Vision Height 2.2 m
Sparndrel Height 2.0 m
MATERIALS
Structural sealant - 6 mm x 12 mm
Spacer tape 6.4 mm thick x 6 mm wide
Weather Sealant - Non Staining (600 ml)
Weather Sealant - Normal (300 ml)
MS Brackets/Aluminium Alloy Brackets
Silicon Gasket in Kg (Above 50 g / m)
EPDM Gasket in Kg (Above 60 g / m)
Anchor Fastner - M10
SS Bolt with washer of sizes for structural
glazing / ACP Cladding
Baker rod
SS Screws of sizes for structural glazing /
ACP Cladding
Fire Stop
Protective Tape
GI flashing - 1.2 mm Thick
Masking tape
Sundries
Sundries (For Fabrication)
Sundries (For Installation)
Sundries (Transporation)
Sundries (Scaffolding / Loading / Unloading)
Sundries (Designing charges etc.)
Rate
Amount
metre
metre
each
each
kg
kg
kg
each
17.02
20.11
1.96
2.55
9.78
0.78
0.70
2.00
30.00
20.00
420.00
125.00
100.00
570.00
150.00
10.00
510.60
402.20
823.20
318.75
978.00
444.60
105.00
20.00
each
metre
2.00
5.04
35.00
5.00
70.00
25.20
each
metre
metre
kg
metre
L.S.
L.S.
L.S.
L.S.
L.S.
L.S.
52.00
1.60
6.72
3.96
6.72
225.50
1804.03
1804.03
451.00
573.00
216.18
4.00
550.00
20.00
58.00
2.30
1.73
1.73
1.73
1.73
1.73
1.73
208.00
880.00
134.40
229.68
15.46
390.12
3120.97
3120.97
780.23
991.29
373.99
1599
Quantity
Code
Description
Unit
Quantity
Rate
TOTAL
TOTAL
Cost for 6.72 sqm
Cost for 1 sqm
Say
25.3
Amount
13942.66
139.43
14082.09
2112.31
16194.40
2409.88
2409.90
Providing, assembling and supplying vision glass panels (IGUs) comprising of

hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units
of size and shape as required and specified, comprising of an outer heat
strengthened float glass 6mm thick, of approved colour and shade with reflective
soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned
clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary
seal and secondary seal (structural silicone sealant) etc. all complete for the required
performances, as per the Architectural drawings, as per the approved shop drawings,
as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled
in the factory/ workshop of the glass processor.
(Payment for fixing of IGU Panels in the curtain glazing is included in cost of
item No.26.2)
For payment, only the actual area of glass on face # 1 of the glass panels
(excluding the areas of the grooves and weather silicone sealant) provided and
fixed in position, shall be measured in sqm.
(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating
on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved
make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light
reflection internal 10 to 15%, light reflection external 10 to 20 %, shading
coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties
of performance glass shall be decided by technical sanctioning authority as per
the site requirement.
Code
2617
Description
Unit
Quantity

Area of Glass deducting area of gap/grove
5% = 6.38 sqm
Vision Height 2.2 m
Wastage 10% = 0.638 sqm say 0.7 sqm
Net = 7.02 sqm
MATERIALS
6 mm thick High performance glass
sqm
7.02
1600
Rate
1850.00
Amount
12987.00
Code
Description
Unit
Quantity
2618
9999
9999
6 mm thick clear heat strengthened glass

Sundries (for insurance Charges)
Sundries ( Fabrication charges including
silicon sealant, baker rod, desecant etc.
Transporation including loading and unloading
TOTAL
TOTAL
Cost for 6.72 sqm
Cost for 1 sqm
Say
sqm
L.S.
7.02
126.27
640.00
1.73
4492.80
218.45
L.S.
L.S.
2120.13
126.27
1.73
1.73
3667.82
218.45
21584.52
215.85
21800.37
3270.06
25070.43
3730.71
3730.70
9999
25.4
Code
2619
2611
2614
2615
2620
2621
2622
2623
2624
2625
9999
Rate
Amount
Extra for openable side / top hung vision glass panels (IGUs) including providing
and supplying at site all accessories and hardwares for the openable panels as
specified and of the approved make such as heavy duty stainless steel friction
hinges, min 4 -point cremone locking sets with stainless steel plates, handles,
buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts,
washers etc. all complete as per the Architectural drawings, as per the approved
shop drawings, as specified and as directed by the Engineer- in-Charge.
Description
Shuttter Weight
Outer glass 6 mm
Area 1.76 sqm
Inner glass 6 mm
Aluminium Weight per sqm 7.78 Kg
Al weight = 1.76x7.78 = 13.7 Kg
No of Locking Point 4 no Total 67 Kg
Wedge Block 1 no
MATERIALS
6 mm thick clear heat strengthened glass
ACP Cladding
Protective Tape
ARMS GS HD -TOP HUNG -20"-TYPE
P-COUPLE
Connection Block
Curtain wall striker
Adjustable Fastening Pawl
Corner drive
Top wedge Block
Sundries
Unit
Quantity
each
kg
3.00
0.80
128.00
150.00
384.00
120.00
each
metre
49.00
1.76
4.00
20.00
196.00
35.20
pair
each
each
each
each
each
L.S.
1.00
2.00
4.00
4.00
2.00
1.00
118.00
1550.00
39.00
100.00
38.00
295.00
135.00
1.73
1550.00
78.00
400.00
152.00
590.00
135.00
204.14
1601
Rate
Amount
Code
Description
Unit
Quantity
9999

TOTAL
TOTAL
Cost for 1.76 sqm
Cost for 1 sqm
Say
L.S.
354.36
25.5
Code
2626
2634
2627
2628
2629
9999
9999
9999
25.6
Rate
1.73
Amount
613.04
4457.38
44.57
4501.95
675.29
5177.24
2941.61
2941.60
Providing, fabricating and supplying shadow box of required size and shape,
for fixing in the spandrel portion of the structural glazing, in linear as well as
curvilinear portions of the building by providing semi -rigid, inorganic, noncombustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183
and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on
surface # 10f the fibre glass insulation layer), of black non-woven fibre glass
tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /
sqm, made of randomly oriented glass fibres distributed in a binder by a wetlay process including fixing 1.5 mm thick solid aluminum sheet backing using,
6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete.
Description
Unit

Width of the unit = 0.86 m
Height of the unit = 3.75 m
Area = 3.23 sqm
Area including wastage @5 % = 3.39
MATERIALS
Glass wool Denisity 48 Kg / m3 with Black
Glass Tissue (BGT)
GI/Aluminium Sheet (0.8 mm thick)
SS Screws - # 8 x 19
Weather Sealant - DC 789
Cement Board
Sundries with clips & adhesives
TOTAL
TOTAL
Cost for 3.23 sqm
Cost for 1 sqm
Say
sqm
kg
each
cartridge
sqm
L.S.
L.S.
L.S.
Quantity
3.39
21.30
32.00
2.00
3.39
308.50
170.64
170.64
Rate
230.00
45.00
10.00
130.00
250.00
1.73
1.73
1.73
Amount
779.70
958.50
320.00
260.00
847.50
533.71
295.21
295.21
4289.83
42.90
4332.73
649.91
4982.64
1542.61
1542.60
Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat

strengthened monolithic float glass of approved colour and shade with reflective
soft coating on surface # 2 of approved colour and shade so as to match the
colour and shade of the IGUs in the vision panels etc. ,all complete for the required
performances as specified, as per the Architectural drawings, as per the approved
shop drawings, as specified, and as directed by the Engineer- in- Charge.
1602
For payment, only the actual area of glass on face # 1 of the glass panels (but
excluding the area of grooves and weather silicone sealant) provided and fixed
in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass
Panels in the curtain glazing is included in cost of relevent Item*).(i) Coloured
tinted float glass 6mm thick substrate with reflective soft coating on face # 2,
having properties as visible Light transmittance (VLT) of 25 to 35 %, Light
reflection internal 10 to 15%, light reflection external 10 to 20 %, shading
coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The properties of
performance glass shall be decided by technical sanctioning authority as per
the site requirement.
Code
2617
9999
9999
9999
25.7
Description
Unit
Quantity

Width of the unit = 0.86 m
Height of the unit = 3.75 m
Area = 3.23 sqm
Area i/c wastage @ 5 % = 3.39 sqm
MATERIALS
6 mm thick High performance glass
Sundries (Insurance charges)
sqm
L.S.
3.39
43.46
1850.00
1.73
6271.50
75.19
L.S.
682.55
1.73
1180.81
L.S.
147.59
1.73
255.33
7782.83
77.83
7860.66
1179.10
9039.76
2798.68
2798.70
Sundries (Fabrication charges including

silicon sealant, baker rod, desecant etc.)
Sundries (transporation including loading
& unloading)
TOTAL
TOTAL
Cost for 3.23 sqm
Cost for 1 sqm
Say
Rate
Amount
Designing, fabricating, testing, installing and fixing in position Curtain Wall with
Aluminium Composite Panel Cladding, with open grooves for linear as well as
curvilinear portions of the building , for all heights and all levels etc. including:
(a) Structural analysis & design and preparation of shop drawings for pressure
equalisation or rain screen principle as required, proper drainage of water to
make it watertight including checking of all the structural and functional design.
(b) Providing, fabricating and supplying and fixing panels of aluminium
composite panel cladding in pan shape in metalic colour of approved shades
made out of 4mm thick aluminium composite panel material consisting of 3mm
thick FR grade mineral core sandwiched between two Aluminium sheets (each
0.5mm thick). The aluminium composite panel cladding sheet shall be coil
coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating
of approved colour and shade on face # 1 and polymer (Service) coating on face
# 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather
silicone sealant, backer rods etc.
1603
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised
with serrations and serrated washers to arrest the wind load movement, fasteners,
SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to
prevent bi-metallic contacts all complete required to perform as per specification
and drawing The item includes cost of all material & labour component, the cost of
all mock ups at site, cost of all samples of the individual components for testing in
an approved laboratory, field tests on the assembled working curtain wall with
aluminium composite panel cladding, cleaning and protection of the curtain wall
with aluminium composite panel cladding till the handing over of the building for
occupation. Base frame work for ACP cladding is payable under the relevant
aluminium item.s The Contractor shall provide curtain wall with aluminium composite
panel cladding, having all the performance characteristics all complete , as per the
Architectural drawings, as per item description, as specified, as per the approved
shop drawings and as directed by the Engineer-in-Charge. However, for the purpose
of payment, only the actual area on the external face of the curtain wall with Aluminum
Composite Panel Cladding (including width of groove) shall be measured in sqm.
up to two decimal places.
Code
2607
2608
2609
2611
2612
2613
2614
2615
2630
2616
2631
9999
9999
9999
9999
9999
9999
Description
Total Area 6.72 sqm
No of Panels 1 no
Area i/c wastage @ 5% = 7.06 sqm
MATERIALS
Weather Sealant - Non Staining (600 ml)
Weather Sealant - Normal (300 ml)
MS Brackets/Aluminium Alloy Brackets
SS Bolt with washer of sizes for structural
glazing / ACP Cladding
ACP Cladding
Protective Tape
Baker rod
GI flashing - 1.2 mm Thick
4 mm thick ACP
Sundries
Sundries (Scaffolding / Loading / Unloading)
Sundries (Transporation)
Sundries (Designing charges etc.)
TOTAL
TOTAL
Cost for 6.72 sqm
Cost for 1 sqm
Say
Unit
Quantity
each
each
kg
kg
each
2.00
2.00
10.00
0.70
2.00
420.00
125.00
100.00
150.00
10.00
840.00
250.00
1000.00
105.00
20.00
each
2.00
35.00
70.00
each
metre
metre
kg
sqm
L.S.
L.S.
L.S.
L.S.
L.S.
L.S.
49.00
7.00
5.00
4.00
7.06
451.00
1895.30
1895.30
602.25
473.83
328.15
4.00
20.00
5.00
58.00
1000.00
1.73
1.73
1.73
1.73
1.73
1.73
196.00
140.00
25.00
232.00
7060.00
780.23
3278.87
3278.87
1041.89
819.73
567.70
19705.29
197.05
19902.34
2985.35
22887.69
3405.90
3405.90
1604
Rate
Amount
25.8
Design supply & installation of suspended Spider Glazing system designed to

withstand the wind pressure as per IS 875 (Part-III). The Suspended System
held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with
glass panel having 12 mm thick clear toughened glass held together with
SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins
21 mm thick. The Glass fins and glass panel assembly shall be connected to
Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts
and at the bottom using SS channel of 50x25x2mm using fastener & anchor
bolts, non staining weather sealants of approved make, Teflon/ nylon bushes
and separators to prevent bi-metallic contacts, all complete to perform as per
specification and approved drawings. The complete system to be designed to
accommodate thermal expansion & seismic movements etc. The joints between
glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly
to be filled with non staining weather sealant, so as to make the entire system
fully water proof & dust proof.
The rate shall include all design, Engineering and shop drawing including
approval from structural designer, labour, T&P, scaffolding, other incidental
charges including wastage, enabling temporary services all fitting fixers nut
bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc.
all complete. For the purpose of payment, actual elevation area of Glazing
including thickness of joints and the portion of Glass panel inside the SS channel
shall be measured.
Code
8945
8946
8947
8948
8949
2612
8560
Description
Details of cost for 35.28 Sqm
Description
WD
HT Nos Area (Sqm)
Facade Area 7.00 5.04 1.00 35.28
Fin Area
0.40 2.30 5.00
4.60
(A) Spider Fitting
4 Point spider fittings of SS-316 grade with
fin but without flat head bolt(c/c routel
distance 200mm)
2 Point wall mounted spider fitting of SS316 grade without flat head bolt and anchor
fastener (c/c routel distance 200mm)
1 Point wall mounted spider fitting of SS316 grade without flat head bolt and anchor
fastener (c/c routel distance 200mm)
Flate head bolt
400 mm long fin plate without fastners
(B) Local Hardware
For one point spider fitting =12x2=24 nos
For two point spider fitting =2x2=4 nos For
400mm fin plates =5x6=30 nosTotal=58 nos
Non staining water resistant Clear silicon
filling in gap
Vr. joints between glasses = 7x5.04=35.28
mHr.joints between glass & wall =
2x7.00=14.00 mTotal=49.28 m
Unit
Quantity
each
5.00
3318.00
16590.00
each
2.00
1659.00
3318.00
each
Nos
pair
12.00
36.00
5.00
1300.00
651.00
5931.00
15600.00
23436.00
29655.00
each
58.00
10.00
580.00
metre
49.28
61.00
3006.08
1605
Rate
Amount
Code
Description
8559
Stainless steel U Channel of size

(50x25x2mm)
Sundries(Baker Road, Screw &Accessories)
Labour
Scaffolding
(C) Glass Area
Toughened glass 12 mm thickness
with hole =7.00x5.04=35.28 sqm + 1.76
sqm (Add 5% Wastage)Total = 37.04 sqm
21mm thick clear toughened Laminated
glass for fins with holes
= 5x2.30x.40=4.60sqm + 0.23sqm
(Add 5% Wastage)Total = 4.83 sqm
TOTAL
TOTAL
Cost of 35.28 sqm
Cost of 1 sqm
Say
9999
9999
9999
8778
2415
Unit
metre
L.S.
L.S.
L.S.
Rate
Amount
7.00
1000.00
10000.00
2600.00
150.00
1.73
1.73
1.73
1050.00
1730.00
17300.00
4498.00
sqm
37.04
1747.00
64708.88
sqm
4.83
6000.00
28980.00
1606
Quantity
210451.96
2104.52
212556.48
31883.47
244439.95
6928.57
6928.55
SUB HEAD : 26.0
NEW TECHNOLOGIES AND

MATERIALS
1607
26.1
Code
8021
8022
8023
8015
1246
1247
0111
0114
9999
26.2
Code
Providing & fixing in position Phenol bonded Bamboowood flooring with

planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm
wide(minimum), in approved colour, texture and finish, having Performance
Appraisal Certificate (PAC) issued by Building Materials & Technology
Promotion Council (BMTPC). The flooring shall be fixed with tongue and
groove interlocking system, with underlayment of 4mm thick expanded poly
ethylene foam sheets having density 40kg/cum, over prepared surface with
necessary quarter round planks of size 1900mm x 18mm and door reducer of
size 1900mm x 44mm, wherever required. The bomboo wood planks shall have
minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco
friendly UV coating, all complete as per direction of the Engineer in-charge.
Description
Details of cost for 10m x 10m = 100 sqm
MATERIAL
Bamboo wood Tile Flooring 14mm thick of
minimum size 1800mm x 130mm
100 + 10 (Add for wastage @10%) = 110 sqm
Bamboo wood Quarter Round 18mm thick
of size 1900mm x 18mm
Bamboo wood door reducer 14mm thick of
size 1900mm x 44mm
Expanded poly ethylene Foam sheet
4mm thick of Density 40kg/m3
100 + 5 (Add for wastage @5%) = 105 sqm
Silicon based Joint Sealant for Tiles
Rubber base Adhesive
LABOUR
Carpenter 1st class
Beldar
Sundries
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
110.00
3775.00
415250.00
metre
39.90
125.00
4987.50
metre
2.00
275.00
550.00
105.00
18.00
1890.00
5.00
5.00
150.00
160.00
750.00
800.00
3.00
3.00
100.00
487.00
368.00
1.73
1461.00
1104.00
173.00
426965.50
4269.66
431235.16
64685.27
495920.43
4959.20
4959.20
sqm
kg
kg
day
day
L.S.
Providing & fixing in position Phenol bonded Bamboo wood in wall skirting with
planks of sizes 14mm thick, 1900mm length (minimum) and 85mm wide(minimum),
in approved colour, texture and finish, having Performance Appraisal Certificate
(PAC) issued by Building Materials & Technology Promotion Council (BMTPC).
The skirting shall be fixed with SS screws & rawl plugs, over underlayment of
4mm thick, expanded poly ethylene foam sheets having 40kg/cum density over
prepared surface. The bomboo wood planks shall have minimum density of 1000
Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete
as per direction of the Engineer in-charge.
Description
Unit
Detail of cost for 10 sqm skirting

MATERIAL
SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS
1609
Quantity
Rate
Amount
Code
Description
8024
Bamboo wood Skirting 14mm thick of

Size 1900mm x 85mm
Area of 1 length skirting is 1.9 m x 0.085 m
= 0.162 sqm
Quantity required for 10 sqm
= 10 / 0.1615 = 61.92 pieces
Add 2.5% wastage= 1.548
Total = 61.92 + 1.548 = 63.468
Qty in running mtr = 63.468 x1.9m
= 120.59 running meter
High Density Expanded poly ethylene
Foam sheet 4mm thick of Density 40kg/m3
10 + 0.5 (Add for wastage @5%) = 10.5 sqm
Stainless steel screws 50 mm
(62x3=186 nos)
Silicon based Joint Sealant for Tiles
Rubber base Adhesive
LABOUR
Carpenter 1st class
Beldar
Sundries
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
8015
8210
1246
1247
0111
0114
9999
26.3
Code
8025
Unit
Quantity
Rate
Amount
sqm
120.59
325.00
39191.75
sqm
10.50
18.00
189.00
100 Nos
1.86
260.00
483.60
kg
kg
1.00
1.00
150.00
160.00
150.00
160.00
day
day
L.S.
1.00
1.00
20.00
487.00
368.00
1.73
487.00
368.00
34.60
41063.95
410.64
41474.59
6221.19
47695.78
4769.57
4769.55
Providing & fixing in position Phenol bonded Bamboowood wall cladding at all
height with planks of sizes 10mm thick, 1800mm length (minimum) and 130 mm
wide (minimum), in approved colour, texture and finish, having Performance
Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion
Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5
nos in each tile to frame work made of second class teak wood of size 20x15 mm
in centre of each tile and bottom and top of work height, 40x15mm placed at ends
of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded
poly ethylene foam of density 40kg/cum in two layers, first layer on wall surface
before fixing wooden frame and second layer on frame under cladding. The
bomboo wood planks shall have minimum density of 1000 Kg/cum & minimum
Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of
the Engineer in-charge.
Description
Details of cost for 10m x 9.5m = 95 sqm
MATERIAL
Bamboo wood Tile Wall Cladding 10mm
thick of size 1900mm x 135mm
10 x 9.5 = 95 + 9.5 (Add for wastage
@10%) = 104.5 sqm
1610
Unit
Quantity
sqm
104.50
Rate
Amount
3375.00
352687.50
Code
Description
8026
Bamboo wood T-mold 14mm thick of size

1900mm x 44mm
At end joints of planks =
4x9.91 = 39.64 mtr + 1.98 (Add for
wastage 5%) = 41.62 mtr
Bamboo wood Threshold 14mm thick of
size 1900mm x 44mm
At perriferi of cladding =
2x(10+9.5)+1.95 (Add for wastage @5%)
=40.95 metre
High Density expanded poly ethylene
(EPE) Foam 1mm thick
(2x10x9.5) = 190 + 9.5 (Add for wastage
@5%)=199.5 sqm
@500mm c/c at teak wood frame
(5nos in each panels)
No of panels=95/(1.9 x 0.135)=370 nos
No. of screws= 370 x 5=1850 nos
10 metre height, at every 1.9 meter height
one length of 10 metre i.e (5x9.91x0.02x
0.015+2x10x0.02x.015+2x9.50x.02x.015+
4x9.91x0.04x0.015)+wastage @5%
=0.052866 cum cudm
LABOUR
Carpenter 1st class
Carpenter 2nd class
Beldar
Sundries
TOTAL
TOTAL
Cost of 95 sqm
Cost of 1 sqm
Say
8027
8016
8210
8212
1190
0111
0112
0114
9999
26.4
Code
8028
Unit
Quantity
metre
41.62
275.00
11445.50
metre
40.95
275.00
11261.25
sqm
199.50
850.00
169575.00
100 Nos
2.58
260.00
670.80
100 Nos
1.85
180.00
3330.00
10 cudm
5.29
675.00
3568.73
5.00
5.00
5.00
100.00
487.00
448.00
368.00
1.73
2435.00
2240.00
1840.00
173.00
559226.78
5592.27
564819.05
84722.86
649541.91
6837.28
6837.30
day
day
day
L.S.
Rate
Amount
Providing & fixing in position Phenol bonded Bamboo wood panelled or panelled
and glazed shutters for doors windows, clerestorey windows with pre-molded
30mm thick planks, in approved colours, texture & finishe. It shall have 10mm
wide, 25mm deep grove to fit in panels.The bamboo wood shall have minimum
density of 1000 Kg/cum, minimum Hardness 1000 Kgf. All styles and rails shall
have profiled interlocking system locked in place by bamboo pins, all complete
as per direction of Engineer in charge. (The panelling will be paid for separately).
Description
Unit
Details of cost for shutters of Bamboowood

200 x 108cm = 2.16 sqm
MATERIAL
Bamboo wood shutter of doors
Styles 4x2.00x0.115x0.03 =0.0276 cum +
1611
10 cudm
Quantity
4.83
Rate
1800.00
Amount
8694.00
Code
8215
8211
0156
0114
9999
26.5
Code
8029
0156
9999
Description
Top rails 1x1.08x0.11x0.03m = 0.0036 cum +
Bottom rails 1x1.08x0.212x0.03
= 0.0069 cum +
Lock rails 1x1.08x0.18x0.03 = 0.0058 cum
Total =0.0439 cum + 0.004 cum
(Wastage @5%)
Grand Total =0.0483 cum OR 4.830 cudm
Stainless steel butt hinges 125x64x1.9 mm
IS : 12817 marked
LABOUR
Carpenter (average)
Beldar
Sundries T&P etc.
TOTAL
TOTAL
Cost of 2.16 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
0.40
0.32
250.00
208.00
100.00
66.56
day
day
L.S.
0.33
0.33
5.62
467.00
368.00
1.73
154.11
121.44
9.72
9145.83
91.46
9237.29
1385.59
10622.88
4918.00
4918.00
Providing & fixing in position Phenol bonded Bamboo wood panelling of 10mm
thick, in 25 to 40 mm thick panelled or panelled & glazed shutters for doors,
windows, clerestorey windows, in approved colour, texture & finish. The bomboo
wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness
1000 Kgf. The panels shall have profiled interlocking system locked in place with
bamboo pins all complete as per direction of the Engineer in-charge. (area of
opening for panel inserts excluding portion inside grooves or rebates to be
measured)
Description
Unit
Details of cost for shutters of a door with

2/3rd panelling
200 x 108 cm = 2.16 sqm
Panel area = 4x45.1x36.55cm = 0.66 sqm
MATERIAL
Bamboo wood panelling (10mm thick)
4x47.2x38.65x1.0cm = 0.0073cum +
0.0007 sqm (Add Wastage @10%)
Total = 0.008 cum OR 8 cudm
LABOUR
Carpenter (average)
Sundries
TOTAL
TOTAL
Cost of 0.66 sqm
Cost of 1 sqm
Say
1612
Quantity
Rate
Amount
10 cudm
0.80
1800.00
1440.00
day
L.S.
0.57
4.42
467.00
1.73
266.19
7.65
1713.84
17.14
1730.98
259.65
1990.63
3016.10
3016.10
26.6
Code
8030
0111
0114
26.7
Code
8561
0111
0128
0114
Providing & fixing in position 65 mm thick factory made door frame of Phenol
bonded Bamboo wood (superior class, interior use), in approved colour, texture
and finish.The bamboo wood shall have minimum density of 1000 Kg/cum,
minimum Hardness 1000 Kgf. The door frame shall have tenon & mortise
interlocking system, to be fixed to the wall with 100 mm size G.I screws all a
complete as per direction of Engineer-in charge.
Description
Unit
Detail of cost for 33 cudm

MATERIAL
Superior class Bamboo wood door frame
65 mm thick
2x206.75x9.5x6.5 cm = 0.0255 cum +
1x117.50x9.5x6.5 cm = 0.0072 cum
Total = 0.033 cum = 33 cudm
+ 0.001 cum (Add for wastage @ 5%)
Grand total = 0.034 cum = 34 Cudm
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 33 cudm
Cost of 1 cudm
Say
Quantity
Rate
Amount
10 cudm
3.40
1800.00
6120.00
day
day
0.72
0.07
487.00
368.00
350.64
25.76
6496.40
64.96
6561.36
984.20
7545.56
228.65
228.65
Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of

required size between cavity wall, complying with ISO 4898:2008 & ASTM C 57808b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578
(measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM
D 1621, density of 34-36 kg/m as per ASTM D 1622, water absorptions 1% by
volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D
2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardent property as
per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable
water based adhesive and fastener, complete in all respect as per the direction of
Engineer-in-Charge.
Description
MATERIAL
Extruded polystyrene rigid insulation board
50 mm thick
LABOUR
Carpenter 1st class
Mate
Beldar
1613
Unit
Quantity
Rate
Amount
sqm
10.20
500.00
5100.00
day
day
day
0.25
0.25
0.25
487.00
407.00
368.00
121.75
101.75
92.00
Code
Description
9999
Sundries (Water based adhesive, fasteners,

scaffolding etc.)
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
26.8
Code
8561
0111
0128
0114
9999
26.9
Unit
Quantity
L.S.
100.00
Rate
1.73
Amount
173.00
5588.50
55.89
5644.39
846.66
6491.05
649.10
649.10
Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of

required size under deck on ceiling surface, complying with ISO 4898:2008 &
ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per
ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed
as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water
absorptions 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1
listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire
retardent property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class
A, fixed with suitable water based adhesive and fastener, complete in all respect
as per the direction of Engineer-in-Charge.
Description
MATERIAL
Extruded polystyrene rigid insulation board
50 mm thick
LABOUR
Carpenter 1st class
Mate
Beldar
Sundries (Water based adhesive,
fasteners, scaffolding etc.)
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
10.20
500.00
5100.00
day
day
day
0.50
0.50
0.50
487.00
407.00
368.00
243.50
203.50
184.00
L.S.
100.00
1.73
173.00
5904.00
59.04
5963.04
894.46
6857.50
685.75
685.75
Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet
frame (45 x 20 mm) of approved shade, quality and make. The profile shall be
laminated on both sides, made from rigid foam sheets (Single extruded) having
density 600 Kg/cum and the exposed edges sealed with PVC edge beading of
same shade and colour. The frame shall be fire retardent with necessary screw
1614
holding capacity. Frame shall be fixed to wall using Expendable Fastner with
necesary stainless steel screws, all complete as per direction of Engineer-incharge.
Code
2491
2493
2494
8210
0111
0114
26.10
Code
2492
2493
9999
0111
0114
Description
Unit
Details of cost for kitchen cabinate

(2.00 x 0.45)+(2.00+0.61)= 2.13 mtr
MATERIAL
Pre laminated both side solid foam uPVC
profile (45x20mm)(Accuplist/Accucel/
Sintex or equivalent)
PVC edge beading
Expandable fastner with plastic sleeve
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost for 2.13 metre
Cost for 1 metre
Say
Quantity
Rate
Amount
metre
metre
each
100 Nos
2.13
4.26
8.00
0.08
125.00
30.00
5.00
260.00
266.25
127.80
40.00
20.80
day
day
0.10
0.10
487.00
368.00
48.70
36.80
540.35
5.40
545.75
81.86
627.61
294.65
294.65
Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm

nominal thickness of approved shade, quality and make, made from rigid foam
sheets (Single extruded) having density 600 Kg/cum and laminated on both
side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed
with PVC edge beading of same shade and colour. The shutter shall be fire
retardent having necessary screw holding capacity. Shutter shall be fixed to
frame using approved hinges with necessary stainless steel screws, all
complete as per direction of Engineer-in-charge.
Description
Unit
Details of cost for of one shutter 0.46 x

0.61m =0.278 sqm
MATERIAL
Solid foam uPVC sheet 20mm thick pre
laminated on both side( Accuplist/Accucel/
Sintex )
PVC edge beading
Sundries
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost for 0.278 sqm
Cost for 1 sqm
Say
1615
Quantity
Rate
Amount
sqm
metre
L.S.
0.278
2.13
20.00
2075.00
30.00
1.73
576.85
63.90
34.60
day
day
0.20
0.20
487.00
368.00
97.40
73.60
846.35
8.46
854.81
128.22
983.03
3536.07
3536.05
26.11
Code
8226
8210
9977
0112
0114
26.12
Code
8956
128
114
139
Providing and fixing concealed hinge of approved quality for 19-20mm thick
door with stainless steel screws complete :
Description
Unit
Details of cost for 10 nos

MATERIAL
Concealed zinc coated hinges 19-20 mm
thick with mounting plate hettich
make(code 1078660)
LABOUR
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost of 10 nos
Cost of 1 no
Say
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
0.10
0.80
2.73
400.00
260.00
1.73
400.00
208.00
4.72
day
day
0.14
0.09
448.00
368.00
62.72
33.12
708.56
7.09
715.65
107.35
823.00
82.30
82.30
Supplying & laying of bi-axial extruded high modulus polypropylene geogrid

coforming to MORTH SPECIFICATION for base/sub-base reinforcement having
minimum tensile strength 15kN/m in the longitudinal and transverse direction,
with 5kN/m and 7kN/m tensile strength at 2% and 5% strain respectively in the
longitudinal and transverse direction, junction efficiency not less than 95%
and with 38mm X 38mm mesh opening.
Description
Details of Cost for 300 Sqm
MATERIAL
Bi-Axial Extruded GeoGrids of Minimum
Tensile Strength 15 kN/m in the longitudinal
and transverse direction
Add 10 per cent of the cost of reinforcing
elements (synthetic geogrids) for wastage
and accessories like tie-strips, nuts and
bolts and loops/lugs for joining reinforcing
elements with the facia pannels, overlaps
and other protective elements for synthetic
geogrids and all other activities required to
complete the item in all respect including
taxes and transportation. 10% of 28500=2850
LABOUR
Mate
Beldar
Skilled Beldar
TOTAL
Add Water charges @ 1%
TOTAL
Add Contractors profit and overheads
@ 15%
Cost for 300 Sqm
Cost per Sqm
Say
1616
Unit
Quantity
Sqm
300.00
Rate
95.00
Amount
28500.00
2850.00
day
day
day
0.36
6.00
3.00
407.00
368.00
407.00
146.52
2208.00
1221.00
34925.52
349.26
35274.78
5291.12
40565.99
135.22
135.20
26.13
Code
8957
128
0114
139
26.14
Code
8958

with 7kN/m and 14kN/m tensile strength at 2% and 5% strain respectively in
the longitudinal and transverse direction, junction efficiency not less than
95% and with 38mm X 38mm mesh opening.
Description
MATERIAL
Tensile Strength 20kN/m in the longitudinal
taxes and transportation. 10% of
327000=3270
LABOUR
Mate
Beldar
Skilled Beldar
TOTAL
TOTAL
Add Contractors profit and overheads @ 15%
Cost for 300 Sqm
Cost per Sqm
Say
Unit
Quantity
Sqm
300.00
Rate
109.00
Amount
32700.00
3270.00
day
day
day
0.36
6.00
3.00
407.00
368.00
407.00
146.52
2208.00
1221.00
39545.52
395.46
39940.98
5991.15
45932.12
153.11
153.10

with 10.5kN/m and 21kN/m tensile strength at 2% and 5% strain respectively in
Description
MATERIAL
1617
Unit
Quantity
Sqm
300.00
Rate
178.00
Amount
53400.00
Code
128
0114
139
26.15
Code
8959
128
0114
139
Description
Unit

53400=5340
LABOUR
Mate
Beldar
Skilled Beldar
TOTAL
TOTAL
Cost for 300 Sqm
Cost per Sqm
Say
Quantity
Rate
Amount
5340.00
day
day
day
0.36
6.00
3.00
407.00
368.00
407.00
146.52
2208.00
1221.00
62315.52
623.16
62938.68
9440.80
72379.48
241.26
241.25

with 14kN/m and 28kN/m tensile strength at 2% and 5% strain respectively in
Description
MATERIAL
78000=7800
LABOUR
Mate
Beldar
Skilled Beldar
TOTAL
TOTAL
Cost for 300 Sqm
Cost per Sqm
Say
1618
Unit
Quantity
Sqm
300.00
Rate
260.00
Amount
78000.00
7800.00
day
day
day
0.36
6.00
3.00
407.00
368.00
407.00
146.52
2208.00
1221.00
89375.52
893.76
90269.28
13540.39
103809.67
346.03
346.00
26.16
Code
8960
128
114
139
26.17
Supplying & laying of drainage composite for use behind walls, between two
different fills, alongside drains of road, below concrete lining of canals etc.
Geocomposite for planar drainage, realized by thermobonding a draining core
in extruded monofilaments with two filtering nonwoven geotextiles that may
also be working as separation or protecting layers. The draining three
dimensional core will have a W configuration as longitudinal parallel
channels. Minimum thickness to be 7.2mm, with two filtering UV stabilized
polypropylene nonwoven geotextile of minimum thickness of 0.75mm having
pores of 150 micron and tensile strength of 8.0 kN/m that will be working as
separation or protecting layer, geocomposite having in plane flow capacity of
2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength
of 18 kN/m , with mass per unit area of 740 gsm, supplied in the form of roll for
easy transportation to site of work as per detailed specification all complete
as per directions of Engineer in charge.
Description
Material
Geosynthetic Drainage Composite
Add 10 per cent of the cost of synthetic
Composits for wastage and accessories for
joining sheets with the facia pannels,
overlaps and other protective elements for
synthetic Composits and other
miscelleneus activities required to
transpotarion & takes. 10% of 151200=15120
Mate
Beldar
Skilled Beldar
TOTAL
TOTAL
Cost for 300 Sqm
Cost per Sqm
Say
Unit
Quantity
Rate
Sqm
300.00
504.00
day
day
day
0.36
6.00
3.00
407.00
368.00
407.00
Amount
151200.00
15120.00
146.52
2208.00
1221.00
169895.52
1698.96
171594.48
25739.17
197333.65
657.78
657.80
Supplying & laying of drainage composite for use behind walls, between two
different fills, alongside drains of road, below concrete lining of canals etc.
having thermobonding a draining core - HDPE geonet comprises of two sets
of parallel overlayed ribs integrally connected to have a rhomboidal shape
with a polyethylene film and a nonwoven geotextile having mass per unit area
130 g/m2 and tensile strength of 8.0 kN/m that will be working as separation
or protecting layer, geocomposite having in plane flow capacity of 0.7 L / (m.s)
at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 13.5 kN/
m , with mass per unit area of 830 gsm, at easily accessible location including
1619
top and bottom, with all leads and lifts, manpower and machinery, materials,
labour etc. complete and as directed by Engineer - In - Charge.
Code
8961
128
114
139
Description
Material
Geosynthetic Drainage Composite
Add 10 per cent of the cost of synthetic
Composits for wastage and accessories for
joining sheets with the facia pannels,
overlaps and other protective elements for
synthetic Composits and other
miscelleneus activities required to
transpotarion & takes.
10% of 180000=18000
Mate
Beldar
Skilled Beldar
TOTAL
TOTAL
Cost for 300 Sqm
Cost per Sqm
Say
Unit
Quantity
Rate
Sqm
300.00
600.00
day
day
day
0.36
6.00
3.00
407.00
368.00
407.00
Amount
180000.00
18000.00
146.52
2208.00
1221.00
201575.52
2015.76
203591.20
30538.69
234129.97
780.43
780.45
26.18
Supplying and laying high strength flexible geogrids (HSFG) as soil

reinforcement / basal reinforcement as per MORTH 3100 and IRC 113, made of
high tenacity polyester core with polyethylene coating with Minimum Long
Term Design Strength (LTDS) of more than 50% of ultimate tensile strength
at 30 degree Celcius corresponding to 12 % strain .
26.18.1
Ultimate tensile strength- 100 kN/m
Code
8962
128
114
Description
MATERIAL
Synthetic Geogrid
taxes and transportation.
10% of 60000=6000
LABOUR
Mate
Beldar
1620
Unit
Quantity
Sqm
300.00
Rate
200.00
Amount
60000.00
6000.00
day
day
0.36
6.00
407.00
368.00
146.52
2208.00
Code
Description
Unit
Quantity
139
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
Say
day
3.00
Unit
Quantity
Sqm
300.00
26.18.2
Code
8963
128
114
139
26.18.3
Code
8964
Rate
407.00
Amount
1221.00
69575.52
695.76
70271.28
10540.69
80811.97
269.37
269.35

Description
MATERIAL
Synthetic Geogrid
66000=6600
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
Rate
220.00
Amount
66000.00
6600.00
day
day
day
0.36
6.00
3.00
Unit
Quantity
Sqm
300.00
407.00
368.00
407.00
146.52
2208.00
1221.00
76175.52
761.76
76937.28
11540.59
88477.87
294.93
294.95

Description
MATERIAL
Synthetic Geogrid
1621
Rate
300.00
Amount
90000.00
9000.00
Code
128
114
139
26.18.4
Code
8965
128
114
139
26.18.5
Code
8966
Description
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
Unit
Quantity
day
day
day
0.36
6.00
3.00
Unit
Quantity
Sqm
300.00
Rate
407.00
368.00
407.00
Amount
146.52
2208.00
1221.00
102575.52
1025.76
103601.28
15540.19
119141.47
397.14
397.15

Description
MATERIAL
Synthetic Geogrid
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
Rate
330.00
Amount
99000.00
9900.00
day
day
day
0.36
6.00
3.00
Unit
Quantity
Sqm
300.00
407.00
368.00
407.00
146.52
2208.00
1221.00
112475.52
1124.76
113600.28
17040.04
130640.32
435.47
435.45

Description
MATERIAL
Synthetic Geogrid
1622
Rate
350.00
Amount
105000.00
Code
128
114
139
26.18.6
Code
8967
128
114
139
26.18.7
Code
8968
Description
Unit

taxes and transportation. 10% of 105000
=10500
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
Quantity
Rate
Amount
10500.00
day
day
day
0.36
6.00
3.00
Unit
Quantity
Sqm
300.00
407.00
368.00
407.00
146.52
2208.00
1221.00
119075.52
1190.76
120266.28
18039.34
138306.22
461.02
461.00

Description
MATERIAL
Synthetic Geogrid
=11700
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
Rate
390.00
Amount
117000.00
11700.00
day
day
day
0.36
6.00
3.00
Description
Unit
Quantity
MATERIAL
Synthetic Geogrid
Sqm
300.00
407.00
368.00
407.00
146.52
2208.00
1221.00
132275.52
1322.76
133598.28
20039.74
153638.02
512.13
512.15
1623
Rate
420.00
Amount
126000.00
Code
128
114
139
26.18.8
Code
8969
128
114
139
Description
Unit

=12600
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
Quantity
Rate
Amount
12600.00
day
day
day
0.36
6.00
3.00
Unit
Quantity
Sqm
300.00
407.00
368.00
407.00
146.52
2208.00
1221.00
142175.52
1421.76
143597.28
21539.59
165136.87
550.46
550.45

Description
MATERIAL
Synthetic Geogrid
=15000
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
1624
Rate
500.00
Amount
150000.00
15000.00
day
day
day
0.36
6.00
3.00
407.00
368.00
407.00
146.52
2208.00
1221.00
168575.52
1685.76
170261.28
25539.19
195800.47
652.67
652.65
26.18.9
Code
8970
128
114
139
26.18.10
Code
8971
128
114
139

Description
MATERIAL
Synthetic Geogrid
=16500
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
Unit
Quantity
Sqm
300.00
Rate
550.00
Amount
165000.00
16500.00
day
day
day
0.36
6.00
3.00
Unit
Quantity
Sqm
300.00
407.00
368.00
407.00
146.52
2208.00
1221.00
185075.52
1850.76
186926.28
28038.94
214965.22
716.55
716.55

Description
MATERIAL
Synthetic Geogrid
=19500
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
1625
Rate
650.00
Amount
195000.00
19500.00
day
day
day
0.36
6.00
3.00
407.00
368.00
407.00
146.52
2208.00
1221.00
218075.52
2180.76
220256.28
33038.44
253294.72
844.32
844.30
26.18.11
Code
8972
128
114
139
26.18.12
Code
8973
128
114
139

Description
MATERIAL
Synthetic Geogrid
=21240
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
Unit
Quantity
Sqm
300.00
Rate
708.00
Amount
212400.00
21240.00
day
day
day
0.36
6.00
3.00
Unit
Quantity
Sqm
300.00
407.00
368.00
407.00
146.52
2208.00
1221.00
237215.52
2372.16
239587.68
35938.15
275525.83
918.42
918.40

Description
MATERIAL
Synthetic Geogrid
=25230
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
1626
Rate
841.00
Amount
252300.00
25230.00
day
day
day
0.36
6.00
3.00
407.00
368.00
407.00
146.52
2208.00
1221.00
281105.52
2811.06
283916.58
42587.49
326504.06
1088.35
1088.35
26.18.13
Code
8974
128
114
139
26.18.14
Code
8975
128
114
139

Description
MATERIAL
Synthetic Geogrid
=28500
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
Unit
Quantity
Sqm
300.00
Rate
950.00
Amount
285000.00
28500.00
day
day
day
0.36
6.00
3.00
Unit
Quantity
Sqm
300.00
407.00
368.00
407.00
146.52
2208.00
1221.00
317075.52
3170.76
320246.28
48036.94
368283.22
1227.61
1227.60

Description
MATERIAL
Synthetic Geogrid
elements (synthetic geogrids) for wsatage
=30000
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
1627
Rate
Amount
1000.00
300000.00
30000.00
day
day
day
0.36
6.00
3.00
407.00
368.00
407.00
146.52
2208.00
1221.00
333575.52
3335.76
336911.28
50536.69
387447.97
1291.49
1291.50
26.18.15
Code
8976
128
114
139

Description
MATERIAL
Synthetic Geogrid
=32640
LABOUR
Mate
Beldar
Skilled Beldar
TOATL
TOTAL
Cost for 300 Sqm
Cost per Sqm
say
Unit
Quantity
Sqm
300.00
Rate
Amount
1088.00
326400.00
32640.00
day
day
day
0.36
6.00
3.00
407.00
368.00
407.00
146.52
2208.00
1221.00
362615.52
3626.16
366241.68
54936.25
421177.93
1403.93
1403.95
26.19
Providing at all heights, levels and locations Aluminium profile industrial

troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS
2676. The sheet shall be fixed using self drilling/self tapping SS screws of size
5.5x65 mm with EPDM seal complete upto required pitch in horizontal, vertical
or curved surfaces i/c cutting to size and shape where required as per
specifications, detail drawings and direction of Engineer-in-Charge. The rate
shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for
fixing and approved sealent where required etc. but excluding the cost of
purlins, rafters and trusses.
26.19.1
0.71 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm.
Code
8977
9999
1023
1208
1209
Description
Unit

Consider a shed of 20x10 metres.
(External dimensions of plinth).
Area of roof- 20.20x10.70m = 216.14 sqm.
MATERIAL:
Sheets used = 20 Nosx10.70mx1.044m =
223.42 sqm, Add 3% wastage = 6.70 sqm,
Total = 230.12sqm
Aluminium profile sheet 0.71 mm
Carriage of sheets
Bitumen washer
1628
sqm
L.S.
10 Nos
100 Nos
100 Nos
Quantity
230.12
104.00
47.60
4.76
4.76
Rate
570.00
1.73
115.00
30.00
35.00
Amount
131168.40
179.92
5474.00
142.80
166.60
Code
Description
Unit
Quantity
9999
9999
Carriage of bolts and nuts, washers etc.

Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar
Total
Add water charges @ 1%
Total
Cost of 216.14 sqm
Cost of 1 sqm
Say
L.S.
L.S.
8.06
39.52
1.73
1.73
13.94
68.37
day
day
day
2.34
9.34
9.34
487.00
448.00
368.00
1139.58
4184.32
3437.12
145975.05
1459.75
147434.80
22115.22
169550.02
784.44
784.45
0130
0112
0114
26.19.2
Code
8978
9999
1023
1208
1209
9999
9999
0130
0112
0114
Rate
Amount
0.91 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm.
Description
Unit

Consider a shed of 20x10 metres.
(External dimensions of plinth).
Area of roof- 20.05x10.70m = 216.14 sqm.
MATERIAL:
Sheets used = 20 Nosx10.70mx1.044m =
223.42 sqm, Add 3% wastage = 6.70 sqm,
Total = 230.12sqm
Aluminium profile sheet 0.91 mm
Carriage of sheets
Bitumen washer
Carriage of bolts and nuts, washers etc.
Sundries
LABOUR:
Mistry
Carpenter 2nd class
Beldar
Total
Add water charges @ 1%
Total
Cost of 216.14 sqm
Cost of 1 sqm
Say
1629
sqm
L.S.
10 Nos
100 Nos
100 Nos
L.S.
L.S.
day
day
day
Quantity
Rate
Amount
230.12
104.00
47.60
4.76
4.76
8.06
39.52
736.00
1.73
115.00
30.00
35.00
1.73
1.73
169368.32
179.92
5474.00
142.80
166.60
13.94
68.37
2.34
9.34
9.34
487.00
448.00
368.00
1139.58
4184.32
3437.12
184174.97
1841.75
186016.72
27920.51
213919.23
989.73
989.75
26.20
Code
0164
9999
26.21
Code
0165
9999
26.22
Providing round the clock security guard without gun for watch & ward of
Government premises and its all belongings by deploying neatly dressed
security guards in 8 hour's shift including necessary T&P like torch, lathi and
uniform etc.complete,as per the direction of Engineer-in-charge.(One job
means 8 hour's duty).
Description
Details of cost for 1 job (8hour's duty)
Security guard (without gun)
Lathi,torch,dress & other sundries
TOTAL
Cost of 1 job
Say
Unit
Quantity
day
L.S.
1.00
10.00
Rate
407.00
1.73
Amount
407.00
17.30
424.30
63.65
487.95
487.95
Providing round the clock security guard with gun for watch & ward of
Government premises and its all belongings by deploying neatly dressed
security guards in 8 hour's shift including necessary T&P like torch, lathi and
uniform etc.complete, as per the direction of Engineer-in-charge.(One job
means 8 hour's duty).
Description
Details of cost for 1 job (8hour's duty)
Security guard (with gun)
Lathi,torch,uniform,wooden stick & other
miscellaneous items
TOTAL
Cost of 1 job
Say
Unit
Quantity
Rate
Amount
day
1.00
448.00
448.00
L.S.
10.00
1.73
17.30
465.30
69.80
535.10
535.00
Providing and fixing false ceiling at all heights with integral densified calcium
silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595
mm of approved texture, design and patterns having NRC (Noise Reduction
coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85%
(minimum). Non combustible as per BS:476 (part-4), fire performance as per
BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043
W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick
(galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of
length 1200 mm and secondary intermediate cross-T of size 24x32 mm of
length 600mm to form grid module of size 600 x 600 mm, suspended from
ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm)
i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully
threaded hanger rod upto 1000 mm length and L-shape level adjuster of size
85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm
of length 3000 mm to be fixed on periphery wall / partition with the help of
plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S
screws. The work shall be carried out as per specifications, drawing and as
per directions of the Engineer-in-Charge.
1630
26.22.1
Code
8589
8590
8591
8592
8593
8588
8619
8596
8211
9999
9977
9999
0111
0114
26.23
With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.
Description
MATERIAL
Calcium Silicate tegular edged celling tiles
595x595 mm and 15 mm thick
Celling Area = 100 sqm + Add 5%
wastage = 5 sqm
Total = 105 sqm
Galvanised iron main Tee ceiling section
Size 24x38x0.33 mm (3 metre long)
including wastage @10%
Galvanised iron perimeter wall Angle
Size 24 x 24 x 0.40 mm (3.00 metre long)
Galvanised iron intermediate cross
T section Size 24 x 32 x 0.33 mm
(1.2 metre long)
Galvanised iron intermediate cross
T section Size 24 x 32 x 0.33 mm
( 0.6 metre long)
Galavanised MS hanger rod 6 mm dia
MS fully threaded up to 1000 mm length
Galavanised MS L-shape level adjuster
of size 85x25x2 mm
Galavanised MS 8 mm outer diameter
M-6 dash fastener 50mm long
40 mm long S.S screws with plastic rawl plugs
Scaffolding etc.
Carriage of materials etc.
Sundries
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
Unit
Quantity
Rate
Amount
sqm
105.00
860.00
90300.00
each
29.50
113.00
3333.50
each
13.50
63.00
850.50
each
147.00
38.00
5586.00
each
147.00
19.00
2793.00
each
72.00
25.00
1800.00
each
72.00
14.00
1008.00
each
100 nos
L.S.
L.S.
L.S.
72.00
1.00
498.65
237.48
310.70
31.00
208.00
1.73
1.73
1.73
2232.00
208.00
862.66
410.84
537.51
day
day
28.00
23.00
487.00
368.00
13636.00
8464.00
132022.02
1320.22
133342.24
20001.34
153343.58
1533.44
1533.45
Providing and fixing false ceiling at all heights with integral densified calcium
silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595
mm of approved texture, design and patterns having NRC (Noise Reduction
coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85%
(minimum). Non combustible as per BS:476 (part-4), fire performance as per
BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043
W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of
0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6
1631
mm reveal profile (white/black),comprising of main-T runners of size 15x42

mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and
secondary intermediate cross-T of size 15x42 mm of length 600mm to form
grid module of size 600 x 600 mm, suspended from ceiling using galvanised
mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm
outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto
1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised
iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed
on periphery wall / partition with the help of plastic rawl plugs at 450 mm
center to center and 40mm long dry wall S.S screws. The work shall be carried
out as per specifications, drawing and as per directions of the Engineer-inCharge.
26.23.1
Code
8563
8567
8566
8568
8569
8588
8619
8515
8211
9999
9977
9999
0111
With 15 mm thick integral densified micro edge light weight calcium silicate
false ceiling tiles
Description
MATERIAL
15 mm thick, light weight, integral densified
micro look edged,false ceiling tiles of size
595x595 mm.
Celling Area = 100 sqm + Add 5% wastage
= 5 sqm
Total = 105 sqm
SILHOUETTE Profile grid frame :
Galvanized mild steel perimeter wall angle
22x19x0.40 mm (3000 mm long)
Powder coated steel section main-T ceiling
sections 15x42x0.40 mm (3000 mm long)
Powder coated Galvanised Iron
intermediate cross-T section 15x42x0.40
mm (1200 mm long)
Powder coated Galvanized Iron
intermediate cross-T section
15x42x0.40mm (600 mm long )
Galavanised MS hanger rod 6 mm dia MS
fully threaded up to 1000 mm length
of size 85x25x2 mm
40 mm long S.S screws with plastic rawl plugs
Scaffolding etc.
Sundries
LABOUR
Carpenter 1st class
1632
Unit
Quantity
Rate
Amount
sqm
105.00
900.00
94500.00
each
13.50
110.00
1485.00
each
29.50
225.00
6637.50
each
147.00
90.00
13230.00
each
147.00
45.00
6615.00
each
72.00
25.00
1800.00
each
72.00
14.00
1008.00
each
100 nos
L.S.
L.S.
L.S.
72.00
1.00
498.65
237.48
310.70
31.00
208.00
1.73
1.73
1.73
2232.00
208.00
862.66
410.84
537.51
day
28.00
487.00
13636.00
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 100 sqm.
Cost of 1 sqm.
Say
day
23.00
Rate
368.00
Amount
8464.00
151626.52
1516.27
153142.78
22971.42
176114.20
1761.14
1761.15
26.24
Providing and fixing in position wall panelling at all heights with integral
densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise
Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance
of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance
as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <
0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially
fabricated galvanised mild steel sheet 0.50 mm thick pressed section
(galvanizing @120 grams per sqm including both sides) i.e.vertical studs of
size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling
channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers
using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with
10mm bolt. This same channel is then to be fixed in horiziontal direction at
600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of
50mm thickness is then to be inserted in the slots and finally calcium silicate
non combustible panels/tiles are to be screw fixed with self tapping pan head
nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an
even groove of 1 mm between the panels. The joints between the panels are to
be duly jointed and finished using recommended jointing calcium silicate based
compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of
primer suitable for panelling as per manufacturer's specification as per
direction of Engineer-in-Charge all complete.
26.24.1
With 15 mm thick fully perforated square/butt edge light weight calcium silicate
panels/ tiles
Code
8564
7367
Description
Details of cost for 6.00 x 3.65=21.90 sqm
MATERIAL
15 mm thick, light weight,fully perforated
square/butt edge integral densified,false
ceiling tiles of size 595x595 mm.
21.90 sqm + 1.10 sqm (Add 5% wastage)
Total = 23.00 sqm
Galvanised M.S. sheet 0.5 mm thick
pressed channel section of size 50x32 mm
2 x 6.00 m=12m +0.60 (Add 5% wastage )
= 12.60 m
1633
Unit
Quantity
Rate
Amount
sqm
23.00
865.00
19895.00
metre
12.60
60.00
756.00
Code
Description
7369
Galvanised M.S. sheet 0.50 mm thick

pressed stud : 48x34x36 mm
11 x 3.65 m = 40.15 m + 5 x 6.00 = 30.00 m
Total= 70.15 m +3.51 ( Add 5% wastage )
Total = 73.66m
Self tapping pan head nickle coated mild
steel screws of size 13 x 3.2 mm
12 mm dia 50 mm long wedge type
expanded zinc alloy dash fastner
Glass wool 50 mm thick
21.90 +1.10 (Add 5% wastage) = 23.00 sqm
Calcium silicate base compound for
jointing calcium silicate tiles
22.81/103.68 x 21.9 = 4.82 kgs
Fibre joint tape 50 mm wide (90 metre) roll
1.27/103.68 x 21.90 = 0.27 roll
Sundries such as scaffolding, tools, bits, etc.
LABOUR
Carpenter 1st class
0.30x21.90=6.57 days
Carpenter 2nd class
0.13x21.90=2.847 days
Beldar
0.35x21.90=7.665 days
Painter
TOTAL
TOTAL
Cost of 21.90 sqm.
Cost of 1 sqm.
Say
7025
7383
7274
0764
7026
9999
9977
0111
0112
0114
0131
26.25
Code
8589
9977
Unit
Quantity
Rate
Amount
metre
73.66
75.00
5524.50
1000 Nos
0.392
550.00
215.60
each
sqm
19.00
23.00
7.00
250.00
133.00
5750.00
kg
4.82
25.00
120.50
each roll
0.27
170.00
45.90
L.S.
L.S.
130.00
52.00
1.73
1.73
224.90
89.96
day
6.57
487.00
3199.59
day
2.847
448.00
1275.46
day
7.665
368.00
2820.72
day
1.095
448.00
490.56
40541.69
405.42
40947.11
6142.07
47089.18
2150.19
2150.20
Providing and fixing 15 mm thick false ceiling tiles at all heights with integral
densified calcium silicate reinforced with fibre and natural filler false ceiling
tiles of Size 595x595 mm of approved texture, design and patterns having
NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light
reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire
performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal
conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on
the existing frame work consisting of T-sections and Lsections suitably fixed
according to tile size as per direction of Engineer-in-charge.
Description
MATERIAL
Calcium Silicate tegular edged celling tiles
595x595 mm and 15 mm thick
10 + 0.5 (Add wastage @5%) = 10.5 sqm
Carriage
1634
Unit
Quantity
Rate
Amount
sqm
10.50
860.00
9030.00
L.S.
14.95
1.73
25.86
Code
0111
0114
9999
9999
Description
LABOUR
Carpenter 1st class
Beldar
Scaffolding
Sundries
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
day
day
L.S.
L.S.
2.50
2.00
31.07
31.07
Rate
487.00
368.00
1.73
1.73
Amount
1217.50
736.00
53.75
53.75
11116.86
111.17
11228.03
1684.20
12912.23
1291.22
1291.20
26.26
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced
Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design
and patterns having moisture content less than 2%, humidity resistance of
99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476
(part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal
level suspended on inter-locking metal T-Grid of hot dipped galvanised iron
section of 0.33mm thick (galvanized @ 120 grams per sqm including both
sides) comprising of main-T runners of size 15x32 mm of length 3000 mm,
cross - T of size 15x32 mm of length 1200 mm and secondary intermediate
cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x
600 mm, suspended from ceiling using galvanised mild steel items (galvanizing
@ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners,
6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level
adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size
24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with
the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry
wall wood screws. The work shall be carried out as per specifications, drawing
and as per directions of the Engineer-in-Charge.
26.26.1
With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.
Code
8581
8555
8591
Description
MATERIAL
Celling area =100 sqm
Add wastage @ 5% = 5 sqm
Total=105.00 sqm
12 mm thick micro tegular edged semi
perforated GFRG (Glass Fibre Reinforced
Gypsum) false celing tiles of Size 595x
595 mm
Galvanized iron main-T ceiling sections
15x32x0.33 mm (3000 mm long)
Including wastage @ 10%
Galvanized iron perimeter wall angle
24x24x0.40 mm (3000 mm long)
1635
Unit
Quantity
Rate
Amount
sqm
105.00
624.00
65520.00
each
29.50
177.00
5221.50
each
13.50
63.00
850.00
Code
Description
8556
Galvanized iron intermediate crossT section 15x32x0.33 mm (1200 mm long)

Galavanised MS hanger rod 6mm dia MS
fully threaded up to 1000 mm length
Galavanised MS L-shape level adjuster of
size 85x25x2 mm
Galvanised MS 8mm outer diameter
40mm SS with plastic rawl plugs
Scaffolding etc.
Sundries
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
8587
8588
8619
8596
8211
9999
9977
9999
0111
0114
26.26.2
Code
8582
8555
8591
8556
8587
Unit
Quantity
Rate
Amount
each
147.00
73.00
10731.00
each
147.00
34.00
4998.00
each
72.00
25.00
1800.00
each
72.00
14.00
1008.00
each
100 nos
L.S.
L.S.
L.S.
72.00
1.00
498.65
237.48
310.70
31.00
208.00
1.73
1.73
1.73
2232.00
208.00
862.66
410.84
537.51
day
day
28.00
23.00
487.00
368.00
13636.00
8464.00
116480.01
1164.80
117644.81
17646.72
135291.53
1352.92
1352.90
With fully perforated 12 mm thick micro tegular edged or 10 mm thick square

edged GRG false ceiling tiles.
Description
MATERIAL
Celling area =100 sqm
Add wastage @ 5% = 5 sqm
Total=105.00 sqm
12 mm thick micro tegular edged fully
perforated GFRG (Glass Fibre Reinforced
Gypsum) false celing tiles of Size 595x
595 mm
Galvanized iron main-T ceiling sections
15x32x0.33 mm (3000 mm long)
Galvanized iron perimeter wall angle
24x24x0.40 mm (3000 mm long)
1636
Unit
Quantity
Rate
Amount
sqm
105.00
706.00
74130.00
each
29.50
177.00
5221.50
each
13.50
63.00
850.00
each
147.00
73.00
10731.00
each
147.00
34.00
4998.00
Code
Description
8588
Galavanised MS hanger rod 6mm dia

MS fully threaded up to 1000 mm length
of size 85x25x2 mm
Galvanised MS 8mm outer diameter
40mm long SS screws with plastic
rawl plugs
Scaffolding etc.
Sundries
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
8619
8596
8211
9999
9977
9999
0111
0114
Unit
Quantity
Rate
Amount
each
72.00
25.00
1800.00
each
72.00
14.00
1008.00
each
72.00
31.00
2232.00
100 nos
L.S.
L.S.
L.S.
1.00
498.65
237.48
310.70
208.00
1.73
1.73
1.73
208.00
862.66
410.84
537.51
day
day
28.00
23.00
487.00
368.00
13636.00
8464.00
125090.01
1250.90
126340.91
18951.14
145292.05
1452.92
1452.90
26.27
Providing and fixing mineral fibre false ceiling tiles at all heights of size
595X595mm of approved texture, design and pattern. The tiles should have
Humidity Resistance (RH) of 99%, Light Reflectance ?85%, Thermal
Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6
&7)in true horizontal level suspended on interlocking T-Grid of hot dipped all
round galvanized iron section of 0.33 mm thick (galvanized @120 gsm )
comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size
15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32
mm of length 600 mm to form grid module of size 600x600 mm suspended
from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm
long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded
hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2
mm, spaced at 1200 mm centre to centre along main T. The system should
rest on periphery walls /partitions with the help of GI perimeter wall angle of
size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with
help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S.
screws. The exposed bottom portion of all T-sections used in false ceiling
support system shall be pre-painted with polyester baked paint, for all heights.
The work shall be carried out as per specifications, drawings and as per
directions of the engineer-in-charge.
26.27.1
With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to
0.6)
Code
8552
Description
Unit
Quantity

MATERIAL
Mineral fibre beveled tegular edged ceiling
tiles 595x595 mm, 16 mm thick
sqm
105.00
1637
Rate
786.00
Amount
82530.00
Code
8555
8556
8557
8591
8558
8619
8515
8211
9999
9977
0111
0114
26.27.2
Code
8554
8555
8556
8587
Description
Area = 100 sqm + 5 sqm (Add for wastage
@5%) Total = 105 sqm
G.I. main runner 15X32mm of 3000 mm
length, 0.33mm thick
including 10 % wastage
G.I. cross Tee 15X32mm of 1200mm
length 0.33mm thick
G.I. cross Tee 15X32mm of 600mm length,
0.33 mm thick
Galvanised Steel perimeter wall Angle
Galvanised Iron hanger rod 6mm dia fully
threaded upto 1000mm length
size 85x25x2 mm
40 mm long S.S screws with plastic
rawl plugs
Sundries i.e. scaffolding etc
Carriage of material etc.
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
each
29.50
177.00
5221.50
each
147.00
73.00
10731.00
each
147.00
34.00
4998.00
each
13.50
63.00
850.50
each
72.00
25.00
1800.00
each
72.00
14.00
1008.00
each
72.00
31.00
2232.00
100 nos
L.S.
L.S.
1.00
187.95
89.35
208.00
1.73
1.73
208.00
325.15
154.58
day
day
28.00
23.00
487.00
368.00
13636.00
8464.00
132158.73
1321.59
133480.32
20022.05
153502.36
1535.02
1535.00
With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7)
Description
MATERIAL
tiles 595x595mm, 20 mm thick
Area = 100 sqm + 5 sqm (Add for
wastage @5%)
Total = 105 sqm
length 0.33mm thick
length, 0.33 mm thick
1638
Unit
Quantity
Rate
Amount
sqm
105.00
990.00
103950.00
each
29.50
177.00
5221.50
each
147.00
73.00
10731.00
each
147.00
34.00
4998.00
Code
Description
8591

size 85x25x2 mm
40 mm long S.S screws with plastic rawl
plugs
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
8558
8619
8596
8211
9999
9977
0111
0114
26.27.3
Code
8553
8555
8556
8557
8591
8558
8619
Unit
Quantity
Rate
Amount
each
13.50
63.00
850.50
each
72.00
25.00
1800.00
each
72.00
14.00
1008.00
each
72.00
31.00
2232.00
100 nos
L.S.
L.S.
1.00
187.95
89.35
208.00
1.73
1.73
208.00
325.15
154.58
day
day
28.00
23.00
487.00
368.00
13636.00
8464.00
153578.73
1535.79
155114.52
23267.18
178381.69
1783.82
1783.80
With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile
confirming to ISO 5 (class 100 ) specifications
Description
MATERIAL
tiles 595x595 mm, 16 mm thick with
bioblock, confirming to ISO 5 (class 100)
specifications
Area = 100 sqm + 5 sqm (Add for wastage
@5%)
Total = 105 sqm
length 0.33mm thick
G.I. cross Tee 15X32mm of 600mm length,
0.33 mm thick
of size 85x25x2 mm
1639
Unit
Quantity
Rate
Amount
sqm
105.00
857.00
89985.00
each
29.50
177.00
5221.50
each
147.00
73.00
10731.00
each
147.00
34.00
4998.00
each
13.50
63.00
850.50
each
72.00
25.00
1800.00
each
72.00
14.00
1008.00
Code
Description
8596

40 mm long S.S screws with plastic rawl
plugs
LABOUR
Carpenter 1st class
Beldar
TOTAL
TOTAL
Cost of 100 sqm
Cost of 1 sqm
Say
8211
9999
9977
0111
0114
Unit
Quantity
Rate
Amount
each
72.00
31.00
2232.00
100 nos
L.S.
L.S.
1.00
187.95
89.35
208.00
1.73
1.73
208.00
325.15
154.58
day
day
28.00
23.00
487.00
368.00
13636.00
8464.00
139613.73
1396.14
141009.87
21151.48
162161.35
1621.61
1621.60
26.28
Chipping of unsound/weak concrete material from slabs, beams, columns etc.

with manual Chisel and/ or by standard power driven percussion type or of
approved make including tapering of all edges, making square shoulders of
cavities including cleaning the exposed concrete surface and reinforcement
with wire brushes etc. and disposal of debris for all lead and lifts all complete
as per direction of Engineer-In-Charge
26.28.1
75mm average thickness
Code
9999
0157
0114
26.28.2
Code
9999
0157
Description
Details of cost for One Sqm
75mm average thickness for beams
MACHINERY
Hire charges for HILTY-TE 504 Pneumatic
Chisel
LABOUR
Machine Operator
Beldar
TOTAL
TOTAL
Cost of 1.0 sqm
Say
Unit
Quantity
Rate
Amount
L.S.
5.60
1.73
9.69
day
day
0.20
0.10
487.00
368.00
97.40
36.80
143.89
1.44
145.33
21.80
167.13
167.15
Unit
Quantity
L.S.
3.74
1.73
6.47
day
0.13
487.00
65.26
50mm average thickness

Description
MACHINERY
Chisel
LABOUR
Machine Operator
1640
Rate
Amount
Code
Description
Unit
Quantity
0114
Beldar
TOTAL
TOTAL
Cost of 1.0 sqm
Say
day
0.07
Unit
Quantity
L.S.
1.87
1.73
3.24
day
day
0.07
0.03
487.00
368.00
32.63
12.51
48.38
0.48
48.86
7.33
56.19
56.20
26.28.3
Code
9999
0157
0114
Rate
368.00
Amount
24.29
96.02
0.96
96.98
14.55
111.53
111.55
25 mm average thickness
Description
MACHINERY
Chisel
LABOUR
Machine Operator
Beldar
TOTAL
TOTAL
Cost of 1.0 sqm
Say
Rate
Amount
26.29
Cleaning of reinforcement from rust from the reinforcing bars to give it a total
rust free steel surface by using alkaline chemical rust remover of approved
make with paint brush and removing loose particles after 24 hours of its
application with wire brush and thoroughly washing with water and allowing
it to dry, all complete as per direction of Engineer-In-Charge.
26.29.1
Bars upto 12 mm diameter
Code
7911
0131
0115
9999
Description
Detail of cost for 3.00 sqm (95.54 meter
length of 10 mm dia bar)
Bars upto 12 mm diameter
(1 litre chemical shall cover 3.00 sqm area
of bars)
MATERIALS
Chemical Rust Remover
LABOUR
(Application charges for 3.0 sqm)
Painter
Coolie
Putty, brush, sand paper
1641
Unit
Quantity
Rate
Amount
litre
1.00
200.00
200.00
day
day
L.S.
0.162
0.162
3.162
448.00
368.00
1.73
72.58
59.62
5.47
Code
Description
Unit
Quantity
9999
Sundries
TOTAL
TOTAL
Cost of 3 sqm (95.54 m length of 10 mm
dia bar)
Rate per meter length of bar
Say
L.S.
1.98
26.29.2
Code
7911
0131
0115
9999
9999
Rate
1.73
Amount
3.43
341.10
3.41
344.51
51.68
396.19
4.14
4.15
Bars above 12 mm diameter

Description
Detail of cost for 3.00 sqm (47.78 meter
length of 20 mm dia bar)
Bars above 12 mm diameter
(1 litre chemical shall cover 3.00 sqm area
of bars)
MATERIALS
Chemical Rust Remover
LABOUR
(Application charges for 3.0 sqm)
Painter
Coolie
Putty, brush, sand paper
Sundries
TOTAL
TOTAL
Cost of 3.00 sqm (47.78m length of
20 mm dia bar)
Rate per meter length of bar
Say
Unit
Quantity
Rate
Amount
litre
1.00
200.00
200.00
day
day
L.S.
L.S.
0.162
0.162
3.162
1.98
448.00
368.00
1.73
1.73
72.58
59.62
5.47
3.43
341.10
3.41
344.51
51.68
396.19
8.29
8.30
26.30
Drilling suitable holes in reinforced or plain cement concrete with power driven
drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels,
columns and slabs to introduce steel bars for sunshades/balconies including
fixing the steel bars in position using epoxy resin anchor grout of approved
make but excluding the cost of reinforcement, all complete as per direction of
Engineer-In-Charge.
26.30.1
Upto and including 12mm dia.
Code
7913
Description
Unit

MATERIAL
Epoxy
kg
1642
Quantity
0.20
Rate
550.00
Amount
110.00
Code
0088
0116
0114
Description
Approx unit Weight of Epoxy= 2000kg/cum
or 2gm/cucm
Volume of Epoxy filled =3.14/4[(1.5)2(1.2)2] x 15.5cm = 9.86cucm
Weight of Epoxy for 10 holes=10x9.86 x 2
= 197.20 gms say 200gms = 0.2 kg
MACHINERY
Hire charges of Drill machine upto 30 mm dia
LABOUR
Fitter (grade 1)
Beldar
TOTAL
TOTAL
Rate for 10 holes
Rate for one hole
Say
Unit
Quantity
Rate
Amount
day
0.50
150.00
75.00
day
day
0.50
0.50
487.00
368.00
243.50
184.00
612.50
6.13
618.63
92.79
711.42
71.14
71.15
26.31
Providing, mixing and applying bonding coat of approved adhesive on chipped

portion of RCC as per specifications and direction of Engineer-In-charge
complete in all respect.
26.31.1
SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2
kg cement per sqm of surface area mixed with specified proportion of approved
polymer
Code
0367
7914
0155
0115
9999
Description
Unit
Details of Cost for 10.00 Sqm bonding coat

MATERIAL
SBR Polymer
@ 10% of cement weight= 22.00kgx10%
=2.2 kg
LABOUR
Mason (average)
Coolie
Scaffolding and sundries (8.06/2=4.03)
TOTAL
TOTAL
Cost for 10.00 sqm
Rate per sqm
Say
1643
Quantity
Rate
Amount
tonne
kg
0.022
2.20
5700.00
180.00
125.40
396.00
day
day
L.S.
0.27
0.27
4.03
467.00
368.00
1.73
126.09
99.36
6.97
753.82
7.54
761.36
114.20
875.56
87.55
87.55
26.31.2
Code
7913
9999
9999
26.32
Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

Description
Unit
Details of Cost for 2.20 Sqm

Epoxy
Application charge for applying bonding
coat of Epoxy
Cost of brushes etc.
TOTAL
TOTAL
Cost for 2.20 sqm
Rate per sqm
Say
Quantity
Rate
Amount
kg
1.00
550.00
550.00
L.S.
L.S.
18.50
8.40
1.73
1.73
32.01
14.53
596.54
5.97
602.51
90.38
692.89
314.95
314.95
Providing, mixing and applying SBR polymer (of approved make) modified
Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with
polymer minimum 2% by wt. of cement used) as per specifications and
directions of Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of thickness shall be
done just after the surface preparation is completed and Payment under this
item shall be made only after proper wet curing has been done and surface
has been satisfactorily evaluated by sounding / tapping with a blunt metal
instrument and/or the 75mm size cube crushing strength at the end of 28 days
to be not less than 30 N/Sqmm2).
26.32.1
Code
3.9
7914
0155
0115
0101
9999
12 mm average thickness.
Description
MATERIAL
Cement mortar 1:4 (1 cement : 4 coarse
sand) = 0.144 Cum
Rate as per Item No.3.9 of SH:MORTARS
SBR Polymer
Qty of cement in mortar= 0.144x0.38
= 0.055 MT or 55kg
@ 2% of weight of cement 55kgx2%=1.10 kg
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost for 10 sqm
Rate per sqm
Say
1644
Unit
Quantity
Rate
Amount
cum
kg
0.144
1.10
3970.50
180.00
571.75
198.00
day
day
day
L.S.
0.67
0.75
0.92
12.61
467.00
368.00
407.00
1.73
312.89
276.00
374.44
21.82
1754.90
17.55
1772.45
265.87
2038.32
203.83
203.85
26.32.2
Code
3.9
7914
0155
0115
0101
9999
26.32.3
Code
3.9
7914
0155
0115
0101
9999
25 mm average thickness in 2 layers.

Description
MATERIAL
sand) =(0.144/12)x25=0.30 Cum
SBR Polymer
Cement 0.30x0.38 = 0.114 MT OR 114 kg
@ 2% of weight of cement 114kgx2%
=2.28kg
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost for 10 sqm
Rate per sqm
Say
Unit
Quantity
Rate
Amount
cum
kg
0.30
2.28
3970.50
180.00
1191.15
410.40
day
day
day
L.S.
0.94
1.02
1.01
12.61
467.00
368.00
407.00
1.73
438.98
375.36
411.07
21.82
2848.78
28.49
2877.27
431.59
3308.86
330.88
330.90
Unit
Quantity
cum
kg
0.60
4.56
3970.50
180.00
2382.30
820.80
day
day
day
L.S.
1.88
2.04
2.02
25.22
467.00
368.00
407.00
1.73
877.96
750.72
822.14
43.63
5697.55
56.98
5754.53
863.18
6617.71
661.77
661.75
50 mm average thickness in 3 layers.

Description
MATERIAL
sand) 0.144/12)x50= 0.60 Cum
SBR Polymer
Cement 0.60x0.38 = 0.228 MT OR 228 kg
@ 2% of weight of cement 228kgx2%
=4.56 kg
LABOUR
Mason (average)
Coolie
Bhisti
TOTAL
TOTAL
Cost for 10 sqm
Rate per sqm
Say
1645
Rate
Amount
26.33
Providing, mixing and applying SBR polymer (of approved make @ minimum
2% by wt. of cement used) modified plain/reinforced cement concrete for
structural members having minimum characteristic compressive strength [with
ordinary portland cement, coarse sand and graded stone aggregate of 10mm
maximum size in proportion as per design criteria] with specified average
thickness.
Note: Rates shall be for finished surface area of concrete and shall include
the cost of labour, concrete and appropriate approved Super-Plasticiser for
rendering concrete as flowable and SBR polymer but shall exclude cost of
reinforcement, bond coat, Shear Keys, centering and shuttering, strutting,
propping etc (Payment under this item shall be made only after proper wet
curing has been done and surface has been satisfactorily evaluated by
sounding/tapping with a blunt metal instrument)
26.33.1
Code
5.33.2
0009
7914
26.33.2
Code
5.33.2
0009
50mm thick in Grade M 25 with cement content not less than 330 kg per cum
Description
Detail of cost for 10 sqm area (0.5cum)
M25 concrete 0.5 cum of concrete@
330 kg/cum
SH: Reinforced Cement Concrete
Deduction of pumping charges
accessories etc.
SBR Polymer
@2% of cement 165 kg = 165X2% = 3.3 kg
TOTAL
Add 1 % Water charges except(A) i.e.
(4119.03 - 3625.03) = 494.00
TOTAL
except(A) i.e. (4123.97 - 3625.03) = 498.94
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
cum
0.50
cum
kg
-0.50
3.30
Rate
Amount
7250.05 3625.03(A)
200.00
180.00
-100.00
594.00
4119.03
4.94
4123.97
74.84
4198.81
419.88
419.90
Description
Unit
Quantity

330 kg/cum
Deduction of pumping charges
accessories etc.
cum
0.75
cum
-0.75
1646
Rate
Amount
7250.05 5437.54(A)
200.00
-150.00
Code
Description
Unit
Quantity
7914
SBR Polymer
@2% of cement 247.50 kg = 247.50X2%
= 4.95 kg
TOTAL
(6178.54 - 5437.54) = 741.00
Total
except(A) i.e. (6185.95 - 5437.54) = 748.41
Cost of 10 sqm
Cost of 1 sqm
Say
kg
4.95
26.34
Rate
180.00
Amount
891.00
6178.54
7.41
6185.95
112.26
6298.21
629.82
629.80
Providing and laying SBR Polymer modified (of approved make @ minimum
2% by wt. of cement used) plain/reinforced concrete jacket for the structural
members e.g. columns, pillars, piers, beams etc with concrete having the
specified minimum characteristic compressive strength [with ordinary portland
cement, coarse sand and graded stone aggregate of 10mm maximum size in
proportion as per design criteria] with specified average thickness all-round
existing core of RCC member.
Note: Rates shall be for finished surface area of concrete and shall include
the cost of making holes in existing RCC slab, if required, for pouring concrete
in shuttering mould of jacket and appropriate approved Super-Plasticiser for
rendering concrete as flowable self compacting and SBR polymer but shall
exclude cost of reinforcement, bond coat, Shear Keys, centering and
shuttering, strutting, propping etc (Payment under this item shall be made
only after proper wet curing has been done and surface has been satisfactorily
evaluated by sounding/tapping with a blunt metal instrument)
26.34.1
Code
5.33.2
0009
7914
Description
M25 concrete 0.5 cum of concrete with
cement content 330 kg/cum
accessories etc.
SBR Polymer
@2% of cement 165 kg = 165X2% = 3.3 kg
TOTAL
(4119.03 - 3625.03) = 494.00
TOTAL
except(A) i.e. (4123.97 - 3625.03) = 498.94
Cost of 10 sqm
Cost of 1 sqm
Say
1647
Unit
Quantity
cum
0.50
cum
kg
-0.50
3.30
Rate
Amount
7250.05 3625.03(A)
200.00
180.00
-100.00
594.00
4119.03
4.94
4123.97
74.84
4198.81
419.88
419.90
26.34.2
Code
5.33.2
0009
7914
26.34.3
Code
5.33.2
0009
7914
26.35
Description
accessories etc.
SBR Polymer
@2% of cement 247.50 kg = 247.50X2%
= 4.95 kg
TOTAL
(6178.54 - 5437.54) = 741.00
TOTAL
except(A) i.e. (6185.95 - 5437.54) = 748.41
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
cum
0.75
cum
kg
-0.75
4.95
Rate
Amount
7250.05 5437.54(A)
200.00
180.00
-150.00
891.00
6178.54
7.41
6185.95
112.26
6298.21
629.82
629.80
Description
Detail of cost for 10 sqm area (1.00 cum)
accessories etc.
SBR Polymer
@2% of cement 330 kg = 330X2% = 6.6 kg
TOTAL
(8238.05 - 7250.05) = 988.00
TOTAL
except(A) i.e. (8247.93 - 7250.05) = 997.88
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
cum
1.00
cum
kg
-1.00
6.60
Rate
Amount
7250.05 7250.05(A)
200.00
180.00
-200.00
1188.00
8238.05
9.88
8247.93
149.68
8397.61
839.76
839.75
Providing and injecting approved grout in proportion recommended by the

manufacturer into cracks/honey-comb area of concrete/masonry by suitable
gun/pump at required pressure including cutting of nipples after curing etc.
complete as per directions of Engineer-in-Charge.
(The payment shall be made on the basis of actual weight of approved grout
injected.)
1648
26.35.1
Code
7927
0367
9977
9999
0122
0157
0157
26.35.2
Code
7914
0367
9977
9999
0122
0157
Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement

used) modified Cement slurry made with non shrink compound in concrete/
RCC work
Description
Detail of cost for 100 kg Acrylic polymer
mixed cement grout
MATERIAL
Acrylic Polymer chemical for cracks
Considering 1 kg of cement grout mixed
with non shrink polymer compound with
cement @ 2% of cement
Injecting charges of Stirrer mixed polymer grout
Gun, rubber, pipe and other accessories
hire charges of plant, machinery including
necessary fuel and transportation of site
LABOUR
Foreman
Nozzleman
Pump Operator
TOTAL
TOTAL
Cost of 100 kg
Cost of 1 kg
Say
Unit
Quantity
Rate
Amount
kg
2.00
30.00
60.00
tonne
L.S.
0.10
1.00
5700.00
1.73
570.00
1.73
L.S.
2250.00
1.73
3892.50
day
day
day
1.00
1.00
1.00
487.00
487.00
487.00
487.00
487.00
487.00
5985.23
59.85
6045.08
906.76
6951.84
69.51
69.50
Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made
with Shrinkage Compensating Cement in concrete/RCC work.
Description
Detail of cost for 100 kg of SBR polymer
mixed cement grout
MATERIAL
SBR Polymer for crack
Injecting charges of Stirrer mixed polymer grout
Gun, rubber, pipe and other accessories
hire charges of plant, machinery including
necessary fuel and transportation of site Rs
4000/- per day including plant shall be used
of doing approximate 50 sqm Hence
cost per sqm (4000/50 = 80)
LABOUR
Foreman
Nozzle Operator
1649
Unit
Quantity
Rate
Amount
kg
tonne
L.S.
2.00
0.10
1.00
180.00
5700.00
1.73
360.00
570.00
1.73
L.S.
2250.00
1.73
3892.50
day
day
1.00
1.00
487.00
487.00
487.00
487.00
Code
Description
Unit
Quantity
0157
Pump Operator
TOTAL
TOTAL
Cost of 100 kg
Cost of 1 kg
Say
day
1.00
26.35.3
Code
7913
0092
0114
0157
9999
Rate
487.00
Amount
487.00
6285.23
62.85
6348.08
952.21
7300.29
73.00
73.00
Epoxy injection grout in concrete/RCC work of approved make

Description
Details of cost for10kg Epoxy grout
MATERIAL
Epoxy
Hire charges of Plant and machinery, it can
inject - 350kg/day
LABOUR
Beldar
Nozzle Operator
Sundries (gloves gogles etc.)
TOTAL
TOTAL
Cost of 10 kg
Cost of 1 kg
Say
Unit
Quantity
Rate
Amount
kg
10.00
550.00
5500.00
day
0.03
100.00
3.00
day
day
L.S.
0.06
0.03
5.00
368.00
487.00
1.73
22.08
14.61
8.65
5548.34
55.48
5603.82
840.57
6444.39
644.43
644.45
26.36
Providing, erecting, maintaining and removing temporary protective screens

made out of specified fabric with all necessary fixing arrangement to ensure
that it remains in position for the work duration as required by the Engineerin-charge.
26.36.1
Wooven PVC cloth
Code
7915
9999
Description
MATERIAL
Wooven PVC cloth
Fixing double scaffolding outside
Total Material
LABOUR
For fixing and removal after complete of
work @25%
TOTAL
TOTAL
Rate for 10 sqm
Rate for 1 sqm
Say
1650
Unit
Quantity
sqm
L.S.
10.00
11.00
Rate
25.00
1.73
Amount
250.00
19.03
269.03
67.26
336.29
3.36
339.65
50.95
390.60
39.06
39.05
26.37
Code
0089
0090
0982
0114
9999
26.38
Cleaning of exposed concrete surface of sticking material including loose

and foreign material by sand blasting with coarse sand followed by and
including cleaning with oil free air blast as per direction of Engineer in charge.
Description
Machinery
Hire charges of sand blasting equipment
(14 sqm per day)
Hire charges of compressor
Material
LABOUR
Beldar
Sundries
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
day
0.70
400.00
280.00
day
0.70
600.00
420.00
cum
1.00
1200.00
1200.00
day
L.S.
0.70
10.00
368.00
1.73
257.60
17.30
2174.90
21.75
2196.65
329.50
2526.15
252.61
252.60
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved
design mix concrete having the specified minimum characteristic compressive
strength [with ordinary portland cement, coarse sand and graded stone
aggregate of 10 mm maximum size in proportion as per design criteria]
including the cost of centering and shuttering at edges and corners etc. as
directed by Engineer- in-Charge
Note: Rates shall include the providing necessary ground wires etc. The
levelling gauges, if used, shall be paid for separately. Payment under this item
shall be made only after proper wet curing has been done and surface has
been satisfactorily evaluated by sounding/tapping with a blunt metal
instrument.
26.38.1
Code
Description
5.33.2

330 kg/cum
Cubical qty of concrete for 10 sqm
= 10x1.00x0.025 = 0.25 cum
Wastage 25%, = 0.25x25/100=0.0625 cum
Total=0.3125 cum
Machinary
Compressor, gun, rubber pipes & other
accessories- hire charge of plant &
machinery i/c necessary fuel
(approx. 40 sqm area of shotcrete per day
= 10/40 = 0.25 day)
0086
1651
Unit
Quantity
Rate
cum
0.3125
7250.05 2265.64(A)
day
0.25
4000.00
Amount
1000.00
Code
0157
0154
0124
0161
0101
26.38.2
Code
5.33.2
0086
0157
0154
0124
0161
0101
26.38.3
Code
Description
Labour
Nozzel man/ gun man
Helper (Technician)
Bhisti
TOTAL
(4291.64 - 2265.64) =2026.00
TOTAL
except(A) i.e. (4311.90 - 2265.64) = 2046.26
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
day
day
day
day
day
0.40
0.40
0.40
0.80
0.40
Rate
487.00
487.00
448.00
368.00
407.00
Amount
194.80
194.80
179.20
294.40
162.80
4291.64
20.26
4311.90
306.94
4618.84
461.88
461.90
Description
330 kg/cum
= 10x1.00x0.050 = 0.50 cum
Wastage 25%, = 0.50x25/100=0.125 cum
Total=0.625 cum
Machinary
= 10/25 = 0.4 day)
Labour
Nozzel man/ gun man
Helper (Technician)
Bhisti
TOTAL
(7157.28 - 4531.28) =2626.00
TOTAL
except(A) i.e. (7183.54 - 4531.28) = 2652.26
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.625
day
0.40
4000.00
1600.00
day
day
day
day
day
0.40
0.40
0.40
0.80
0.40
487.00
487.00
448.00
368.00
407.00
194.80
194.80
179.20
294.40
162.80
7157.28
7250.05 4531.28(A)
26.26
7183.54
397.84
7581.38
758.14
758.15
Description
Unit

330 kg/cum
1652
Quantity
Rate
Amount
Code
5.33.2
0086
0157
0154
0124
0161
0101
26.39
Code
7921
7922
7923
7924
0155
0115
Description
= 10x1.00x0.025 = 0.25 cum
Wastage 25%, = 0.25x25/100=0.0625 cum
Total=0.3125 cum
Machinary
= 10/15 = 0.665 day)
Labour
Nozzel man/ gun man
Helper (Technician)
Bhisti
TOTAL
(10482.92 - 6796.92) = 3686.00
TOTAL
except(A) i.e. (10519.98 - 6796.92)
= 3723.06
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.9375
7250.05 6796.92(A)
day
0.665
4000.00
2660.00
day
day
day
day
day
0.40
0.40
0.40
0.80
0.40
487.00
487.00
448.00
368.00
407.00
194.80
194.80
179.20
294.40
162.80
10482.92
36.86
10519.98
558.46
11078.44
1107.84
1107.85
Providing and inserting 12mm dia galvanised steel injection nipple in honey
comb area and along crack line including drilling of holes of required diametre
(20mm to 30mm) up to depth from 30mm to 80mm at required spacing and
making the hole & crack dust free by blowing compressed air, sealing the
distance between injection nipple with adhesive chemical of approved make
and allow it to cure complete as per direction of Engineer-In-Charge.
Description
Details of cost for 20.00 Nos Hole
MATERIAL
Adhesive chemical
(750 mm deep & 20 mm Dia Hole)
Volume of hole =20x(3.14/4)x2.00x
2.00x7.5=471 cub cm.
Adhesive @ 40% of 471 ml=188.40 ml,
Say 188 ml
Bit of drilling machine for Hole upto
30mm dia
(One Bit done 20 Holes only)
GI injection nipple 12mm dia, 75mm long
Blowing compressed air for cleaning
holes upto 30mm dia
LABOUR
Mason (average)
Coolie
1653
Unit
Quantity
Rate
Amount
ml
188.00
2.36
443.68
each
1.00
475.00
475.00
each
20.00
40.00
800.00
each
20.00
10.00
200.00
day
day
0.50
0.50
467.00
368.00
233.50
184.00
Code
Description
Unit
Quantity
0101
Bhisti
TOTAL
TOTAL
Cost of 20 Nos hole
Cost of 1 hole
Say
day
0.50
26.40
Code
7925
0091
1021
9977
0103
0114
26.41
Rate
407.00
Amount
203.50
2539.68
25.40
2565.08
384.76
2949.84
147.49
147.50
Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or
other suitable size wire mesh to be fixed & firmly anchored to the concrete
surface by means of "L" shaped mild steel shear key welded with existing
reinforcement including the cost of materials, labour, tool & plants as approved
by Engineer-in-charge.
Description
Details of cost for 10.00 sqm ( i.e 77.50 kg.)
MATERIAL
L shaped 100mm long, 10mm dia mild
steel shear key
key to be provided at 0.5 mtr centre to
centre in each direction
Total no. of Shear key of MS Bar in
10sqm = 25 nos
25x0.10x0.617=1.55 kg
Welding charges of shear key to existing
reinforcement
Hard drawn steel wire fabric
75x25mm, weight 7.75kg/sqm
75x25 mm = 10.00 sqm + Add 5%
wastage = 0.50 sqm Total = 10.50 sqm
Carriage at site
LABOUR
Beldar
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
kg
1.55
67.10
104.01
each
sqm
25.00
10.50
2.00
400.00
50.00
4200.00
L.S.
5.61
1.73
9.71
day
day
1.00
1.00
448.00
368.00
448.00
368.00
5179.72
51.80
5231.52
784.73
6016.25
601.62
601.60
Designing, providing, installing and fixing factory finished custom designed

cold form Light Gauge Steel Framed super structure comprising of steel wall
panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel
sheet as per design requirements. The steel sheet shall be galvanized (AZ-150
gms Aluminium Zinc Alloy coated steel having minimum yield strength 300550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel
framing and construction and also as per IS: 875-1987, ISO 800-1984 and IS:
801- 1975. The wind load shall be as per provisions of IS 875 (part -III). LGSFS
1654
frame shall be designed as per IS: 801 using commercially available software
such as Frame CAD Pro-11.7/ STAAD PRO-V8i/ArchitekV2.5.16/ Revit
architecture-2011 or equivalent. Proper usage of Connection Accessories like
Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss
with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped
Angles for better structural stability. The framing section shall be cold form
C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required
length as per structural design requirement duly punched with dimple/slot at
required locations as per approved drawings. The slots will be along centre
line of webs and shall be spaced minimum 250mm away from both ends of the
member. The frame can be supplied in panelized or knock down condition in
specific dimensions and fastened with screws extending through the steel
beyond by minimum of three exposed threads. All self drilling tapping screws
for joining the members shall have a Type II coating in accordance with ASTM
B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of
length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene
rubber using self expanding carbon steel anchor bolt of dia as per approved
drawings. design subject to minimum 12mm diameter and 121mm length
conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of
100mm in RCC (RCC to be paid separately) and located not more than 300mm
from corners or termination of bottom tracks complete in all respects. The
item also includes the submission of stability reports duly examined and issued
by any NIT/IIT. The rate includes the concept design, detailed design,
fabrication of sections, transportation, installation and all required fixing
arrangement at site as described above.
Code
8579
9977
8580
0103
0114
26.42
Description
Details of cost for 1.00 Kg
MATERIAL
Cold form light gauge Steel C-section of
thickness 0.75mm i/c zink coating/sliting etc.
= 1.00 + 0.05 (Add for wastage @5%)
= 1.05 kg
Carriage
Deduct for
Scrap value wastage of cold form light
gauge steel
Labour for assembling/ fixing etc
Beldar
TOTAL
TOTAL
Cost for 1.00 kg
Say
Unit
Quantity
Rate
Amount
kg
1.05
126.00
132.30
L.S.
1.685
1.73
2.92
kg
-0.05
17.00
-0.85
day
day
0.01
0.03
448.00
368.00
4.48
11.04
149.89
1.50
151.39
22.71
174.10
174.10
Providing and fixing of external wall system on Light gauge steel frame work
with . Outer face having 6mm thick heavy duty fiber cement board fixed on
9mm thick heavy duty fiber cement board confirming to IS 14862:2000, category
IV type A (High pressure steam cured) as per standard sizes fixed with self-
1655
drilling / taping screws / fasteners @ 60cm c/c of approved make. A grove of 2

mm to 3mm shall be maintained and groves shall be sealed with silicon based
sealant. The board shall be fixed in a staggered pattern.Screws shall be of
counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length
varying from 25 to 45 mm and internal face 12.5mm thick gypsum plaster board
fixed on 8mm thick fiber cement board confirming to IS 14862:2000 of category
III type B (High pressure steam cured) as per standard sizes fixed with selfdrilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping
and jointing to be done using fiber mesh tape and epoxy and acrylic based
jointing compound for seamless finish.(cost of frame work to be paid for
separately).
Code
0238
2636
0240
2635
Sub
A/R- 1
0239
2636
7009
2635
Sub
A/R- 2
0112
0114
Description
MATERIALS
6 mm thick heavy duty fiber cement board
1x10 = 10 sqm +1.00 (Add for wastage
@10%)Total = 11.00 sqm
GI Screws of gauge 10, length 45 mm for
fixing cement fibre board to C section
@10%)Total = 11.00 sqm
Taping and finishing cement board joints
Filling the grove of 2.3 mm between 6mm
and 9mm thick fiber cement boards
8mm thick heavy duty fiber cement board
1x10 = 10 sqm +1.00 (Add for wastage @
10%)Total = 11.00 sqm
12.5 mm thick tapered edge gypsum plain
borad
@10%)Total = 11.00 sqm
GI Screws of gauge 10, length 25 mm
for fixing cement fibre board to C section
Filling the grove of 2.3 mm between 8mm
thick fiber cement board and 12.5 mm thick
gypsum plastic board
LABOUR
For cutting and fixing of cement and
gypsum board
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
1656
Unit
Quantity
Rate
Amount
sqm
11.00
440.00
4840.00
each
sqm
40.00
11.00
3.00
659.00
120.00
7249.00
each
40.00
2.75
110.00
sqm
sqm
10.00
11.00
81.05
322.00
810.50
3542.00
each
40.00
3.00
120.00
sqm
11.00
160.00
1760.00
each
40.00
2.75
110.00
sqm
10.00
220.05
2200.50
day
day
2.00
6.00
448.00
368.00
896.00
2208.00
23966.00
239.66
24205.66
3630.85
27836.51
2783.65
2783.65
Sub A/R-1 Filling the groove (i.e. 2-3mm gap between boards),taping and jointing of the
first layer 6mm and 9mm thick fiber cement boards with epoxy based sealing
compound or with silicon sealant. Second layer is fixed over it in a staggered
pattern.
Code
1248
0112
0114
Description
MATERIAL
Epoxy based sealing Compound
LABOUR
Carpenter 2nd class
Beldar
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
kg
0.14
502.00
70.28
day
day
0.0132
0.0132
448.00
368.00
5.91
4.86
81.05
81.05
Sub A/R-2 Fill the groove (i.e. 2-3mm gap between boards),taping and jointing 8mm thick
fiber cement board and 12.5mm thick gypsum plaster boards with epoxy based
sealing compound, Acrylic based sealing compound, Non woven reinforcement
Tape as per direction of Engineer in charge.(Use a flexible knife so that no air
bubble is entrapped. Allow 1-2 hours gap. Once hard tacky or set, apply a coat
of Acrylic based sealing compound paste to flash fill the beveled area. After
2-4 hours go on to repeat a skin coat with Acrylic based sealing compound to
securely embed the 40mm width (non woven reinforcement Tape. Use only
flexible steel knife, such as provided with packs, to avoid air entrapment within
compound. After overnight drying shrinkage apply a coat of acrylic based
sealing compound to compensate shrinkage. Finally cover the bevel portion
with any suitable overall skin coat with a desired full surface-leveler material).
Code
1248
1249
1250
0112
0114
26.43
Description
MATERIAL
Epoxy based sealing Compound
Acrylic based sealing compound
Non woven reinforcement Tape
LABOUR
Carpenter 2nd class
Beldar
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
kg
kg
metre
0.14
0.26
25.00
502.00
481.00
0.14
70.28
125.06
3.50
day
day
0.026
0.026
448.00
368.00
11.65
9.57
220.06
220.05
Providing and fixing internal wall panels on Light gauge steel frame work with
12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on 8mm
thick fiber cement board conforming to IS 14862:2000 of category III type B
(High pressure steam cured) as per standard sizes fixed with self-drilling / taping
screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter
sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from
25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and
1657
epoxy and acrylic based jointing compound for seamless finish.(cost of frame
work to be paid for separately)
Code
0239
2635
0241
2635
Sub
A/R- 2
0112
0114
26.44
Code
2637
0112
0114
Description
MATERIAL
8mm thick heavy duty fiber cement board
2x10 = 20 sqm + 2.00 (Add for wastage
@10%)= 22.00 sqm
12.5 mm thick Gypsum plaster board
2x10 = 20 sqm + 2.00 (Add for wastage
@10%)= 22.00 sqm
Rate as per Item No.Sub A/R- 2 of SH: Light
Gauge Steel Framed Structure (LGSFS)
LABOUR
gypsum board
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
sqm
22.00
322.00
7084.00
each
sqm
80.00
22.00
2.75
160.00
220.00
3520.00
each
80.00
2.75
220.00
sqm
10.00
220.05
2200.50
day
day
1.11
3.33
448.00
368.00
497.28
1225.44
14967.22
149.67
15116.89
2267.53
17384.42
1738.44
1738.45
Providing and fixing in all exterior face panels breathable vapour barrier
underneath the cement fiber board as per National Building Code 2009 complete
as per direction of Engineer-in-charge.
Description
MATERIAL
Vapour barrier
10.00 sqm + 1.00 sqm (Add for wastage
@10%)
= 11.00 sqm
LABOUR
For fixing fixing 45 sqm vapour barrier
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1.00 sqm
Say
1658
Unit
Quantity
Rate
Amount
sqm
11.00
170.00
1870.00
day
day
0.22
0.22
448.00
368.00
98.56
80.96
2049.52
20.50
2070.02
310.50
2380.52
238.05
238.05
26.45
Code
0238
2635
Sub
A/R- 1
0112
0114
26.46
Code
8013
Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy

duty fiber cement board (High pressure steam cured) conforming to IS
14862:2000 of category III type B as per standard sizes fixed with self-drilling /
taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm
thick of 8 to 10 gauge of length varying from 25 to 45 mm.
Description
MATERIAL
@10%)= 11.00 sqm
Rate as per Item No.Sub A/R- 1 of SH:Light
Gauge Steel Framed Structure (LGSFS)
LABOUR
gypsum board 18.00 sqm
Carpenter 2nd class
Beldar
TOTAL
TOTAL
Cost of 10 sqm
Cost of 1.00 sqm
Say
Unit
Quantity
Rate
Amount
sqm
11.00
440.00
4840.00
each
40.00
2.75
110.00
sqm
10.00
81.05
810.50
day
day
1.11
3.33
448.00
368.00
497.28
1225.44
7483.22
74.83
7558.05
1133.71
8691.76
869.17
869.15
Providing and fixing in position, 200 mm thick factory made Expanded

Polystyrene Core (EPS Core) wall panels consisting of EPS core sandwiched
between two Engineered sheets of welded wire fabric mesh duly finished with
shortcrete materials on outer faces. The fabric mesh shall be made of 3 mm dia
G.I. wire mesh with 50 mm pitch in both the directions and on both faces of the
wall, kept at 120-135 mm gap and connected by the zig zag G.I. wire of 3 mm dia
at alternate row by welding (at an angle ranging from 50-70 degree) . The EPS
core shall consist of 100 mm thick EPS of density not less than 20 kg/ per cum.
Both the outer faces of the panel shall be finished by applying the layer of 50
mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than
40% stone chips of size upto 6 mm)} with the help of shotcreting/guniting
equipment etc at a pressure not less than 1 bar (100Kn/m2) and both surfaces
finished with trowel. Fixing operations of wall panels shall be completed in all
respect as per drawings and specifications and under the overall direction of
the Engineer-in-charge.
Description
Unit
Details of cost for 1.20x3.00m= 3.60 sqm

MATERIAL
Factory made EPS Core wallpanel /roof
panel sandwiched between two Engineered
1659
Quantity
Rate
Amount
Code
9999
3.8
9999
9999
26.47
Code
8013
Description
welded wire fabric mesh of 3 mm dia G.I.
wire mesh,with 50 mm pitch in both the
directions, kept at 120-135 mm gap and
interconnected by the zig zag G.I. wire of 3
mm dia at alternate row by welding.
@5%)Total = 3.78 sqm
Add for L-shape,U-shape & straight lap mesh
Cement mortar 1:3 (1cement:3 coarse sand)
2x1.20x3.00x0.05= 0.36 cum
Rate as per Item No.3.8 of SH: Mortar
10 mm TMT bars (2 nos.75 mm long)
Aluminium C-channels (100mmx150mm
long)
For fixing wall with foundation
LABOUR
For carrying out shotcreting, shoring,
leveling, and finishing the surface with
trowel.
TOTAL
TOTAL
Cost of 3.60 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
sqm
3.78
1650.00
6237.00
L.S.
208.00
1.73
359.84
cum
0.36
4723.50
1700.46
L.S.
312.15
1.73
540.02
L.S.
707.50
1.73
1223.98
10061.30
100.61
10161.91
1524.29
11686.20
3246.16
3246.15
Providing and fixing in position, 230mm thick factory made Expanded Polystyrene
Core (EPS Core) roof/floor panels made of 3 mm dia G.I. wire mesh with 50 mm
pitch in both the directions and on both faces of panel, kept at 120-135 mm gap
and connected by the zig zag G.I. wire of 3 mm dia at alternate row by welding
(at an angle ranging from 50-70 degree). The EPS core shall consist of 100 mm
thick EPS of density not less than 20kg/ per cum. The bottom side of the panel
shall be finished by applying a layer of 60-65 mm thick cement mortar 1: 3 {1
cement: 3 coarse sand (not having more than 40% stone chips of size upto 6
mm)} with the help of shotcreting equipment etc at a pressure of not less
than 1 bar (100Kn/m2) and surface finished with trowel. The top face of the
panel shall be provided and finished by applying 70-75 mm thick layer of cement
concrete 1:1.5: 3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm
nominal size). Fixing operations of roof/floor panels shall be completed in all
respect as per drawings and specifications and under the overall direction of
the Engineer-in-charge.
Description
Unit
Details of cost for 1.20x3.00m= 3.60 sqm

MATERIAL
Factory made EPS Core wallpanel /roof
panel sandwiched between two Engineered
welded wire fabric mesh of 3 mm dia G.I.
wire mesh,with 50 mm pitch in both the
directions, kept at 120-135 mm gap and
1660
Quantity
Rate
Amount
Code
3.8
5.3
9999
9999
26.48
Code
Description
interconnected by the zig zag G.I. wire of 3
mm dia at alternate row by welding.
sqm 3.78
1650.00 6237.00
@5%)Total = 3.78 sqm
Cement mortar 1:3 (1cement:3 coarse sand)
60mm thick on the bottom of roof slab
=1x1.2x3.00x0.060= 0.216cum
Rate as per Item No.3.8 of SH: Mortar
Cement concrete 1:1.5:3
70mm thick on the top of roof slab
=1x1.20x3.00x0.07= 0.252 cum
Add for L-shape, U-shape & straight
lap mesh
LABOUR
For providing concreting, shotcreting,
shoring, leveling, plastering and finishing
the surface with trowel.
TOTAL
i.e. on (10909.75 - 1862.48) = 9047.27
TOTAL
Cost of 3.60 sqm
Cost of 1 sqm
Say
Unit
Quantity
Rate
Amount
cum
0.22
4723.50
cum
0.25
7390.80 1862.48(A)
L.S.
202.32
1.73
350.01
L.S.
832.36
1.73
1439.98
10909.75
1020.28
90.47
11000.22
1370.66
12370.88
3436.35
3436.35
Providing and fixing aluminium formwork for monolithic construction RCC

members using grade 5052 aluminium for panel sheets of minimum 4 mm
thickness and grade 6061 (Type-6) aluminium for extruded sections. The
tolerance of finished panels to be (-1 mm). Pins and wedges to be made of high
grade mild steel. All complete as per direction of Engineer-in-charge.
Description
Unit
Details of cost for 75.998 sqm say 76 sqm

2.7mx2.7mx1.00m
Contact area = 10.8 sqm.
MATERIAL
unserviceable after use of 100 times
Adding for maintenance @ 10% of cost
Taking salvage value after full use of
material @ 35% of cost
I Aluminium Formwork System
1 Wall ( W ) Panels
a.) 2050X600mm, Qty. = 2 Nos = 2.460 sqm
b.) 2050X300mm, Qty. = 2 Nos = 1.230 sqm
c.) 2050X250mm, Qty. = 2 Nos = 1.025 sqm
d.) 300X1150mm, Qty. = 1 Nos = 0.345 sqm
Total = 5.06 sqm
1661
Quantity
Rate
Amount
Code
8031
8032
Description
2 WRB Panels
a.) 2325x350mm, Qty. = 1 Nos = 0.814 sqm
b.) 2325X250mm, Qty. = 2 Nos = 1.163 sqm
c.) 2100X600 mm,Qty. = 24 Nos = 30.240 sqm
d.) 2100X450mm, Qty. = 4 Nos = 3.780 sqm
e.) 2100X300mm, Qty. = 2 Nos = 1.260 sqm
f.) 2100X250 mm,Qty. = 2 Nos = 1.050 sqm
g.) 350X1150mm, Qty. = 1 Nos = 0.403 sqm
Total = 38.71 sqm
3 Panels
a.) 825X600mm, Qty. = 2 Nos = 0.990 sqm
b.) 825X300 mm,Qty. = 2 Nos = 0.495 sqm
c.) 825X250 mm,Qty. =2 Nos = 0.413 sqm
d.) 650X600 mm,Qty. = 24 Nos = 9.360 sqm
e.) 650X450 mm,Qty. = 4 Nos = 1.170 sqm
f.) 650X300 mm,Qty. = 2 Nos = 0.390 sqm
g.) 650X250 mm,Qty. = 2 Nos = 0.325 sqm
Total = 13.143 sqm
4 Deck Panels
a.) 1100x450mm, Qty. = 14 Nos = 6.930 sqm
b.) 1100x250mm,Qty. =2 Nos = 0.550 sqm
c.) 750x450mm,Qty. = 1 Nos = 0.338 sqm
Total = 7.818 sqm
5 Kicker Panels
a.) 125 x 2300mm, Qty. = 2 Nos = 0.576 sqm
b.) 125 x 1150 mm, Qty. = 2 Nos = 0.288 sqm
Total = 0.864 sqm
6 Door Closing Panel (DCRB)
a.) 1975 x 150mm, Qty. = 2 Nos = 0.593 sqm
b.) 2325x150 mm, Qty. = 1 Nos = 0.349 sqm
Total = 0.942 sqm
G. Total = 66.537 sqm
= 66.537x0.75/100 = 0.499 sqm
Aluminium sheets Grade 5052, 4 mm thick
for wall panel/deck panel/WRB panel/Kicker
Panels/door closing panels
7 Internal Corner
a.) 2350 mm Qty. = 3 Nos = 1.586 sqm
b.) 2250 mm Qty. = 4 Nos.= 2.025 sqm
c.) ICI 400x400 mm, Qty. = 10 Nos = 1.800 sqm
Total = 5.411 sqm
8 Column Corners
a.) 2100 mm Qty. = 6 Nos = 2.52 sqm
b.) 650 mm Qty. = 6 Nos = 0.78 sqm
c.) 300 mm Qty. = 4 Nos = 0.24 sqm
Total = 3.54 sqm
G. Total = 8.951 sqm
= 8.951x0.75/100 = 0.0671325 = 0.0672
for Internal Corner/Column Corners/
9 Mid Soldier
a.)1000 mm Qty. = 2 Nos = 0.2 sqm
1662
Unit
Quantity
Rate
Amount
sqm
0.499
8500.00
4241.50
sqm
0.0672
11500.00
772.80
Code
8033
8034
8035
8036
8037
8038
8039
8040
8041
8042
8043
8044
8045
8046
8047
8048
8049
8050
8051
8052
8053
8054
8055
8056
8057
Description
10 End soldier
a.) 800 mm Qty. = 2 Nos = 0.16 sqm
b.) 750 mm Qty. = 2 Nos = 0.15 sqm
Total = 0.31 sqm
G.Total = 0.51 sqm
= 0.51x0.75/100 = 0.003825 = 0.0038
for Mid Soldier/End soldier
II Accessories
Assuming 35% as salvage value, 10%
maintenance cost and 100 times use
before becoming unserviceable
= Qtyx0.75/100
External Corner 2050 mm = 2 x0.75/100
= 0.015
External Corner 825 mm = 2 x0.75/100
= 0.015
Soldier Tie 370 mm = 8 x0.75/100 = 0.06
Adjustable Prop - 2.00 x 2.00m
= 8 x0.75/100 = 0.06
Pin-50 = 936 x0.75/100 = 7.02
Pin-127 = 8 x0.75/100 = 0.06
Wedge = 944 x0.75/100 = 7.08
Wall Tie - 150 ( 355 )mm = 168 x0.75/100
= 1.26
Polythene Sleeve 90 x 150mm
= 168 x0.75/100 = 1.26
Polythene Roll - 150mm Long.
= 168 x0.75/100 = 1.26
Vertical Soldier -1100mm = 4 x0.75/100
= 0.03
Wall Attached Bracket 600x1000mm
= 8 x0.75/100 = 0.06
Allignment Pipe - 3.00 Mtr. = 2 x0.75/100
= 0.015
Allignment Bracket = 6 x0.75/100 = 0.045
Tie Rod for Bracket - 500mm
= 12 x0.75/100 = 0.09
Anchor Wing Nut 100 mm
= 17 x0.75/100 = 0.1275
Debit Pin - 250mm = 5 x0.75/100 = 0.0375
PVC Pipe 20mm - 150mm long
= 12 x0.75/100 = 0.09
PVC Cone = 10 x0.75/100 = 0.075
Bolt+Nut - 16 x 80 mm = 10 x0.75/100
= 0.075
Flat Washer 16, 3mm thik
= 16 x0.75/100 = 0.12
Bolt+Nut - 16 x 30 mm = 50 x0.75/100
= 0.375
Door Spacer 45x45x5 -1135mm Long
= 2 x0.75/100 = 0.015
Door Spacer 45x45x5 - 985mm long
= 2 x0.75/100 = 0.015
1663
Unit
Quantity
Rate
Amount
sqm
0.0038
32000.00
121.60
each
0.015
1400.00
21.00
each
each
0.015
0.06
565.00
274.00
8.48
16.44
each
each
each
each
0.06
7.02
0.06
7.08
1080.00
15.00
52.00
14.00
64.80
105.30
3.12
99.12
each
1.26
45.00
56.70
each
1.26
3.00
3.78
each
1.26
6.00
7.56
each
0.03
351.00
10.53
each
0.06
936.00
56.16
each
each
0.015
0.045
960.00
450.00
14.40
20.25
each
0.09
108.00
9.72
each
each
0.1275
0.0375
60.00
56.00
7.65
2.10
each
each
0.09
0.075
5.00
5.00
0.45
0.38
each
0.075
30.00
2.25
each
0.12
5.00
0.60
each
0.375
18.00
6.75
each
0.015
340.00
5.10
each
0.015
295.00
4.43
Code
0116
0117
0114
9999
9999
Description
LABOUR
Fitter (grade 1)
Beldar
Shuttering oil
Cleaning of shuttering
TOTAL
TOTAL
Cost for 76 sqm.
Cost per sqm.
Say
1664
Unit
Quantity
day
day
day
L.S.
L.S.
2.00
2.00
3.00
220.00
440.00
Rate
487.00
448.00
368.00
1.73
1.73
Amount
974.00
896.00
1104.00
380.60
761.20
9778.77
97.79
9876.56
1481.48
11358.04
149.44
149.45

Dar (Civil) II

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dar (Civil) II

Uploaded by

Copyright:

Available Formats

GOVERNMENT OF INDIA

A GOVERNMENT OF INDIA PUBLICATION

JAIN BOOK DEPOT

JAIN BOOK AGENCY (SOUTHEND)

JAIN BOOK AGENCY (GURGAON)

JAIN BOOK AGENCY (INTERNATIONAL)

JAIN BOOK AGENCY (GREATER NOIDA)

Books will be delivered next day by COURIER

dsUnzh; yksd fuekZ.k foHkkx

HIRE CHARGES OF PLANTS & MACHINERY

Reinforced Cement Concrete

Marble & Granite Work

Wood and PVC Work

Dismantling and Demolishing

Rain Water Harvesting & Tubewells

Conservation of Heritage Buildings.

Structural Glazing Aluminium Composite Panel

New Technologies and Materials

Note: For Sub Heads 1 to 12 refer to Vol. 1

SUB HEAD : 13.0

12 mm cement plaster of mix :

1:4 (1 cement: 4 fine sand)

1:6 (1 cement: 6 fine sand)

1:4 (1 cement: 4 fine sand)

Detail of cost for 10 sqm

SUB HEAD : 13- FINISHING

20 mm cement plaster of mix :

1:4 (1 cement: 4 fine sand)

1:6 (1 cement: 6 fine sand)

SUB HEAD : 13- FINISHING

1:6 (1 cement: 6 fine sand)

12 mm cement plaster of mix :

1:4 (1 cement: 4 coarse sand)

1:6 (1 cement: 6 coarse sand)

SUB HEAD : 13- FINISHING

15 mm cement plaster on rough side of single or half brick wall of mix:

1:4 (1 cement: 4 coarse sand)

1:6 (1 cement: 6 coarse sand)

SUB HEAD : 13- FINISHING

20 mm cement plaster of mix :

1:4 (1 cement: 4 coarse sand)

1:6 (1 cement: 6 coarse sand)

12 mm cement plaster finished with a floating coat of neat cement of mix :

1:3 (1 cement: 3 fine sand)

Detail of cost for 10 sqm

SUB HEAD : 13- FINISHING

1:4 (1 cement: 4 fine sand)

1:3 (1 cement: 3 fine sand)

Detail of cost for 10 sqm

SUB HEAD : 13- FINISHING

1:4 (1 cement: 4 fine sand)

Detail of cost for 10 sqm

Rate as per Item Number 3.8 of SH: Mortars

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating

Detail of cost for 10 sqm

Rate as per Item Number 3.8 of SH: Mortars

SUB HEAD : 13- FINISHING

12 mm cement plaster 1:2 (1 cement : 2 stone dust).

Detail of cost for 10 sqm

Rate as per Item Number 3.12 of SH: Mortars

6 mm cement plaster of mix :

1:3 (1 cement : 3 fine sand)

20 mm cement plaster 1:2 (1 cement : 2 stone dust).