You are on page 1of 13

Indonesia Regulation & Pipelines

International Standard &


Certification
INDOPIPE
The 5th International Indoensia Gas Infrastructure
Conference & Exhibition
by Rudiyanto, Chairman of APITINDO
Content
1. Indonesian Regulation
2. Pipeline Design Codes
3. Pipelines Definition
4. Consideration on the Pipelines Design, Installation and Testing
5. Certification Body and Personnel
6. Pipeline Certification and Recertification Scheme
Indonesian Regulatuon
Kepmen Pertambangan dan Energi Nomor 300K/38/M.PE/1997
Keselamatan Kerja Pipa Penyalur Minyak dan Gas Bumi
Keputusan Dirjen MIGAS Nomor : 84.K/38/DJM/1998
Pedoman Dan Tatacara Pemeriksaan Keselamatan Kerja Atas Instalasi, Peralatan Dan TeknikYang Dipergunakan
Dalam Usaha Pertambangan Minyak Dan Gas Bumi Dan Penguasaan Sumberdaya Panas Bumi
Permen Energi dan Sumber Daya Mineral Nomor 15 Tahun 2008
Pemberlakuan Standar Nasional Indonesia Mengenai Sistem Transportasi Cairan Untuk Hidrokarbon dan Standar
Nasional Indonesia Mengenai Sistem Perpipaan Transmisi dan Distribusi Gas Sebagai Standar Wajib
Kepmeneg Lingkungan Hidup Nomor 17 Tahun 2001
Jenis Rencana Usaha dan/atau Kegiatan yang Wajib Dilengkapi dengan Analisis Mengenai Dampak Lingkungan
Hidup
Keputusan Dirjen MIGAS Nomor : 37K/70/DDJM/1990
Standar Dalam Operasi Pertambangan Minyak Dan Gas Bumi Dan Pengusahaan Sumber Daya Panasbumi
Peraturan Dirjen MIGAS Nomor : 43P/382/DDJM/1992
Syarat-Syarat dan Tata Kerja PJIT Bidang Pertambangan Migas dan Sumber Daya Pengusahaan Panas Bumi
Indonesian Regulation
PP Nomor 19 Tahun 1973
Pengaturan Dan Pengawasan Keselamatan Kerja Dibidang Pertambangan
PP Nomor 17 Tahun 1974
Pengawasan Pelaksanaan Eksplorasi Dan Eksploitasi Minyak Dan Gas Bumi di
Daerah Lepas Pantai
PP Nomor 11 Tahun 1979
Keselamatan Kerja Pada Pemurnian Dan Pengolahan Minyak Dan Gas Bumi
Permen Pertambangan & Energi Nomor 06P/0746/M.PE/1991 Pemeriksaan
Keselamatan Kerja Atas Instalasi, Peralatan Dan TeknikYang Dipergunakan Dalam
Pertambangan Minyak Dan Gas Bumi Dan Pengusahaan Sumberdaya Panasbumi
Pipeline Design Code
SNI 13-3473:2011
Sistem Transportasi Pipa Penyalur Untuk Cairan Hidrokarbon Dan Cairan Lain
SNI 13-3474:2009
Sistem Penyaluran Dan Distribusi Pipa Gas
ASME B31.4
Pipeline Transportation System for Liquid Hydrocarbons and Other Liquids
ASME B31.8
Gas Transmission and Distribution Piping Systems
Pipeline Definition and Scope
300K/38/M.PE/1997
Piping system of oil and gas which includes of oil and gas which
includes Flow line, Oil Transmission Pipeline, Gas Transmission
Pipeline, Main Pipeline and Service Pipeline
84.K/38/DJM/1998
A line of connected pipe (conduit of pipe) and its associated
facilities that are used for the conveyance of oil and gas and
geothermal steam.
Pipeline Definition and Scope
300K/38/M.PE/1997
Piping system of oil and gas which includes of oil and gas which
includes Flow line, Oil Transmission Pipeline, Gas Transmission
Pipeline, Main Pipeline and Service Pipeline
84.K/38/DJM/1998
A line of connected pipe (conduit
conduit of pipe) and its associated
facilities that are used for the conveyance of oil and gas and
geothermal steam.
SNI 13-3473:2011
3473:2011 and ASME B31.4
Scope refers to figure 400.1.1 / 2 of SNI 13-3473:2011
13 and figure 400.1.1-1 /
2 of ASME B31.4
SNI 13-3474:2009
3474:2009 and ASME B31.8
All parts of physical facilities through which gas moves in transportation,
including pipe, valves, fittings, flanges (including bolting and gaskets),
regulators, pressure vessels, pulsation dampeners, relief valves,
appurtenances attached to pipe, compressor units, metering facilities,
pressure regulating stations, pressure limiting stations, pressure relief
stations, and fabricated assemblies. Included within this definition are
gas transmission and gathering lines, which transport gas from
production facilities to onshore locations and gas storage equipment of
the closed pipe type, that is fabricated or forged from pipe or fabricated
from pipe and fittings.
Scope refers to figure Q1, Q2 and Q3 of SNI 13-3474:2009
13 and ASME B31.8
Some Considerations to Indonesian Regulation
Compliance
Applicable code and standard
Design and Installation
* Location Class
* Design Factor
* Minimum distance
Testing
* Procedure
* Testing equipment and instrumentation
* Holding time
* Acceptance criteria
Migas Certification/Recertification Process Scheme
Certification Body and Qualified Personnel

Permen Pertambangan & Energi No


06P/0746/M.PE/1991

Peraturan Direjen Migas Nomor


43P/382/DDJM/1992
Challenges
THE MINIMUM ELIGIBILITY to whatever we have
THE MINIMUM ELIGIBILITY and RE-DEFINED 300K/38/M.PE/1997
Thank You

You might also like