Professional Documents
Culture Documents
CATALOGUE
LIPRO has been present on the Slovene and European markets since its
founding in 1998.
In a few years of quick growth we evolved into a very modern and well
organized company, offering products and services that enable industrial
automation.
Introduction
Transport systems in industry are an indispensable segment of working processes.
-PSC90 Chain pallet system,
-PSB90 Belt pallet system,
-PSR 50/60 Roller rails,
cover the major part of needs for part handling and other transport during the production process. All three systems
allow the accumulation of products and therefore are reducing the surface area for storage and shorten the transport
time. The advantage of these systems is their flexibility and the possibility of modular construction. This method allows
us to freely select and add the required modules from simple lines up to a large complex system. In new layout settings
all existing modules can be reused. Special attention was devoted to the use of standard elements and to aesthetic
appearance.
In the catalog are presented standard solutions.For special designs please consult our technical department.
Introduzione
I sistemi di trasporto sono un segmento indispensabile nei processi di lavoro nellindustria.
- Sistemi di trasporto a pallet con catena PSC90,
- Sistemi di trasporto a pallet con cinghia PSB90,
- Rulliere PSR 50/60,
coprono la maggior parte delle esigenze delle funzioni ausiliarie e di altri servizi di trasporto nei processi di
fabbricazione. Tutti e tre i sistemi di trasporto consentono laccumulo dei prodotti e quindi riducono la superficie per lo
stoccaggio e accorciano il tempo di trasporto. Il vantaggio di questi sistemi la loro flessibilit e modularit. Questi tipi
di trasporto ci permettono di essere modulari e quindi intervenire con laggiunta di nuovi moduli anche in un secondo
momento, dalle semplici linee fino ai grandi impianti complessi. Tutti i moduli esistenti possono essere riutilizzati nelle
nuove disposizioni. Nella progettazione stata fatta particolare attenzione alla standardizzazione ed allaspetto estetico.
Nel catalogo ci sono presentate le soluzioni standard. Per le esecuzioni speciali si prega di consultare il nostro ufficio
tecnico.
Einfhrung
Transportsysteme in der Industrie sind ein unverzichtbares Segment der Arbeitsprozesse.
-PSC90 Werkstcktrgersystem - Rollenkette,
-PSB90 Werkstcktrgersystem - Gurt,
-PSR 50/60 Rollenstrecken,
bedecken den den grten Teil des Anforderungen fr Teilehandling und anderer Transport whrend des
Produktionsprozesses. Alle drei Systeme ermglichen die Akkumulation der Produkte und damit Reduzieren der
Flche fr die Lagerung und verkrzen die Transportzeit. Der Vorteil dieser Systeme sind ihre Flexibilitt und die
Mglichkeit des modularen Aufbaus.
Diese Methode gibt uns die Freiheit der Wahl und durch Zugabe der erforderlichen Module aktualisieren wir einfache
Linie in einer groen komplexes System. In den neuen Layout-Einstellungen alle bisherigenModule knnen
wiederverwendet werden. Besondere Aufmerksamkeit bei der Konstruktion wurde fr die Verwendung von Stand-
ardelementen und sthetik bestimmt.
Im Katalog prsentieren wir Standardlsungen. Bei Sonderausfhrungen wenden Sie sich bitte an unsere technische
Abteilung.
2 3
PSC-90 PSC-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
PSC-90
4 5
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Kazalo Kazalo
Stran Stran
Index Page Page Index
Indice Pagina Pagina Indice
Seite Seite
Inhalt Inhalt
Paleta
Workpiece pallets
17PA 08-09
Pallet di trasporto
Werkstcktrger 17CM Pozicioniranje in orientacija
66-73 Positioning and orientation
Verina paletna linija
Pallet System - Chain
17OM Posizionamento e orientamento
Werkstcktrgersystem - Kette
Jermenska paletna linija
Pallet System - Belt
Trasporto a cinghia PSB-90 22-31
Werkstcktrgersystem - Gurt
Podporne noge za PSC-90; PSB-90
17SS-000
Supporting legs for PSC-90; PSB-90
17NE ND -NV 32-34
Telaio di supporto per PSC-90; PSB-90
Streckensttzen fr PSC-90; PSB-90 17SA-000
Valjne proge 17SP-000
Roller rails
Rulliere PSR-50/60 36-49
17PP-000
Rollenstrecken
Podporne noge za PSR-50/60 17PV-000 Upravljalni elementi
Transportation control units
Supporting legs for PSR-50/60
Telaio di supporto per PSR-50/60 17RNE - 17RND 50-51 74-80
17NSS000
Comando di trasporto
Steuerelemente
Streckensttzen fr PSR-50/60
17NSH000
17M2B - 17M3B 17NSV000
Preni in vertikalni moduli
Transverse and vertical modules 17M2C - 17NSH000
Moduli trasversali e verticali
Quer-und Vertikalmodule 17M3C
52-65 17NSV000
17RM2B 17VE
17DP - 17DE
6 7
PSC-90 PSC-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
=B-115
=A-10
=B-72
=B-36
=B-10
podatke obdelovanca na poti skozi celotni proces obdelave. Ti podatki se lahko
B
takoj ovrednotijo in aktualizirajo.
=A-115
The workpiece pallet is used in the transfer system to convey the workpiece 10
through the processing stations.
=A-72
28
Integrated positioning bushings enable defined positioning of the incoming
workpiece in the processing station (+/- 0,1 mm).
=A-36
Optional data tags contain workpiece relevant information and accompany the
piece throughout the processing circuit. This information can be evaluated A
on-site and also up-dated.
PSC-90 PSB-90 PSR-50/60
To fulfill special needs, the workpiece pallets can also be individually configured
in a design where the carrying plate is assembled by the customer. In addition
Key Code 17PA 160 160
to frame modules with different wear pads, various carrying plates, positioning
bushings, and all the necessary fastening elements are available.
A B
For special designs please consult our technical department.
G Fe
A B FGA FGB Code FGA
FGB
pallet
Nel sistema di trasferimento, il pallet ha la funzione di mezzo di trasporto
del pezzo da lavorare attraverso le varie stazioni di lavorazione. (mm) (mm) (kg) (kg) (kg) Polyamide PA
*160 *160 1,2 24 24 *17 PA 160 160
Le boccole di posizionamento consentono di posizionare con precisione A
il pezzo da lavorare in una stazione di lavorazione (+/- 0,1 mm). 240 160 1,8 36 24 17 PA 240 160 B A B
Con il supporto dati (opzional a disposizione), il pezzo da lavorare
puo`essere accompagnato dalle informazioni rilevate durante tutto il percorso di 240 240 2,6 36 36 17 PA 240 240
lavorazione ed eventualmente modificate e/o aggiornate in loco. 320 160 2,3 48 24 17 PA 320 160
Per rispondere ad esigenze particolari i pallet possono essere configurati secondo 320 240 3,3 48 36 17 PA 320 240
Dolina nalene povrine se lahko razlikuje pri uporabi palet, ki
lesigenza del Cliente e con differenti tipi di piastre di supporto e boccole di 320 320 4,3 48 48 17 PA 320 320 niso kvadratne oblike, med vzdolnim in prenim transportom.
posizionamento.
Per le esecuzioni speciali si prega di consultare il nostro ufficio tecnico. 400 240 4,1 60 36 17 PA 400 240
* Prosim, obrnitese na nao tehnino slubo.
400 320 5,3 60 48 17 PA 400 320
400 400 6,6 60 60 17 PA 400 400 The surface length on the conveyor medium may vary in longitu-
dinal and transverse conveying with non-square pallets.
Der Werkstcktrger dient im Transfersystem als Transportmittel fr das 480 320 6,4 72 48 17 PA 480 320
Werkstck auf dem Weg durch die Bearbeitung Stationen. 480 400 7,8 72 60 17 PA 480 400 * Please contact our technical department.
ber integrierte Positionierbuchsen wird eine definierte Positionierung 480 480 9,3 72 72 17 PA 480 480
desaufgenommenen Werkstckes in der Bearbeitungsstation ermglicht (+/- 0,1 La lunghezza della superficie di contatto pu variare nelluso dei
mm). 640 400 10,4 96 60 17 PA 640 400 pallet, che non sono di forma quadrata, tra il trasporto longitudi-
In optional verfgbaren Datentrgern knnen werkstckrelevante 640 480 12,3 96 72 17 PA 640 480 nale e trasversale.
Informationen das Werkstck auf dem Bearbeitungsweg begleiten. Diese
knnen vor Ort ausgewertet und aktualisiert werden. 640 640 16,3 96 96 17 PA 640 640 * Si prega di contattare il nostro ufficio tecnico.
800 400 11,4 120 60 17 PA 800 400
Fr besondere Anforderungen knnen die Werkstcktrger in der Ausfhrung Die Auflagelnge auf dem Frdermittel kann bei nichtquad-
mit Trgerplatte im Selbstbau individuell konfiguriert werden. Neben 800 480 15 120 72 17 PA 800 480 ratischen Werkstcktrgern im Lngs- und Quertransport ver-
Rahmenmodulen mit verschiedenen Laufsohlen stehen dafr verschiedene
Trgerplatten, Positionierbuchsen und die erforderlichen Befestigungselemente
800 640 22,2 120 96 17 PA 800 640 schieden sein.
zur Verfgung. 800 800 29,4 120 120 17 PA 800 800
Bei Sonderausfhrungen wenden Sie sich bitte an unsere technische Abteilung. * Kontaktieren Sie bitte unsere technische Abteilung.
A= B= 17 PA __ __
8 9
PSC-90 PSC-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
The accumulation roller chain is suitable for large, Die Staurollenkette ist fr schwere und groe
heavy work piece pallets. The accumulation rollers Werkstcktrger geeignet. Die Staurollen
do not only reduce the accumulation pressure on ermglichen nicht nur eine Minderung des
stoppers, but also enable a quick return to the Staudruckes an Vereinzelern, sondern ber Be-
transport speed from workstations. schleunigungselemente eine rasche
Wiederaufnahme der Transportgeschwindigkeit
Standard solutions of plastic sliding profile inserted nach Bearbeitungsstationen.
in aluminum profile allows loads up to 1,5 kg/cm. In der Standardlsung, wenn die Schiebeprofil aus
The new combination of profiles and the chain is Kunststoff in Aluminium Profil eingeschoben ist
very robust and practically maintenance-free. ermglicht die Belastung bis zu 1,5 kg/cm.
For special designs please consult our technical Auflagelasten von 1,5 kg/cm.
department. Eine besonders robuste und nahezu wartungsfreie
Kombination ergibt sich aus den neuen Profilen.
Bei Sonderausfhrungen wenden Sie sich bitte an
unsere technische Abteilung.
PSC-90
Modul pogonski - veliki Proga z verigo
Drive module - heavy Line with chain drive
Modulo d`azionamento - pesante 17CDMH 17CPG Linea a catena
Umlenkung schwer Strecke mit kettenantrieb
pg. 12-13 pg. 18-19
10 11
PSC-90 PSC-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
=A+53 152,2
300 =A+2
107,5
130
El. motor se lahko postavi desno (R), levo (L) ali
centralno (C).
100
L
346
The heavy drive module is designed to drive the
line with Chain and section of return unit.
BN71B4 BN 14 VF49 P i =60; i=45; i=36; i=28 0,37 7,4 - 9,9 - 12,4 - 15,9
12 13
PSC-90 PSC-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
107,5
R
Drives the conveyor medium accumulation
268
rollerchain in self-built conveyor units with section,
return unit and accumulation roller chain.
Motor Reduktorji
Motor Reduction gear
Kw (m/min)
Motore Riduttore
Motor typ Reduktionsgetribe
BN63 B4 BN 14 VF30 P i =60; i=40; i=30 0,18 3,9 - 5,8 - 7,8
14 15
PSC-90 PSC-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
=A+43
120 =A+2
80
=A-101
107,5
Odgonski modul ima v progi funkcijo vraanja
verige k pogonskima moduloma
17CDMH ali 17CDML.
PSC-90
Order Code 17CRU
16 17
PSC-90 PSC-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
18 19
PSC-90 PSC-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Orodje za verigo Utensile per la catena a rulli folli Descrizione NOTES:
Description Tool for accumulation roller chain Werkzeug fr Staurollenkette Beschreibung
PSC-90
Order Code 17PCM 000
Orodje za verigo slui razstavljanju verinih lenov. Lutensile di smontaggio facilita lapertura e lo
Verigo postavimo v orodje na eno stran nastavka in smontaggio della catena a rullini folli. Girando il
z druge strani s kljuem pod pritiskom privijemo mandrino filettato si toglie lateralmente un rivetto
dve igli kateri razdvojita zakovien verini len. della catena che consente di rimuovere la catena
stessa.
Lutensile fornito di barra filettata con testa
esagonale e dima per posizionamento preciso della
catena.
The chain breaker makes it easier to open and Das Demontagewerkzeug erleichtert das ffnen
disassemble the accumulation roller chain. Turning und die Demontage der Staurollenkette. Durch
the thread mandrel pushes out a chain bolt and the Zudrehen des Gewindedorns wird ein Kettenniet
chain can be removed. seitlich ausgetrieben und die Kette kann
Hardened thread mandrel with hexagonal fixture entnommen werden.
wrench as a lever arm Grooves to exactly position Gewindedorn gehrtet mit Sechskantaufnahme fr
the chain links. einen Sechskantschraubenschlssel als Hebelarm
Nuten fr genaue Positionierung der Kettenglieder.
20 21
PSB-90 PSB-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
The conveyor media belt is suitable for conveying Die Frdermittel Gurt eignet sich fr die
small and medium-sized work piece pallets in clean Befrderung von Werkstcktrgern Kleiner und
and dry environments. mittlerer Gre in schmutzarmer und trockener
In standard solution of plastic sliding profile in- Umgebung.
serted in aluminum profile allows loads In der Standardlsung, wenn die Schiebeprofil aus
up to 1 kg/cm. Kunststoff in Aluminium Profil eingeschoben ist
For special designs please consult our technical ermglicht die Belastung bis zu 1 kg/cm. Bei Son-
department. derausfhrungen wenden Sie sich bitte an unsere
technische Abteilung.
PSB-90
22 23
PSB-90 PSB-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
=A+53 152,2
300 =A+2
107,5
130
El. motor se lahko postavi desno (R), levo (L) ali
centralno (C).
100
L
346
The heavy drive module is designed to drive the
line with belt and section of return unit.
24 25
PSB-90 PSB-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
107,5
The light drive module is designed to drive the line L
268
with belt and section of return unit.
Il motore puo essere montato lateralmente a destra irina palete Larghezza pallet
(R) o a sinistra (L). A 100 mm -1.200 mm
Pallet width Palet Breite
Die kleine Antriebsmodul dient fr Antrieb des Pozicija pogona Posizione motoriduttore L= leva-Left-sinistra-Links
Frdermediums Gurt bei Selbstbau von
B R= desna-Right-destra-Rechts
Drive position Antriebsposition
Streckeneinheiten mit Strecke, Umlenkung und
Gurt. Pozicija motoreduktorja Posizione motoriduttore
C 1-2-3-4
Drive position Antriebsposition
Es dient fr Streckenlasten bis zu FG = 60kg
Hitrost Velocit
D 4,8 - 29 m/min
Motoranbau seitlich rechts (R) oder links (L). Velocity Geschwindigkeit
Motor Reduktorji
Motor Reduction gear
Kw (m/min)
Motore Riduttore
Motor typ Reduktionsgetribe
BN63 B4 BN 14 VF30 P i =60; i=40; i=30 0,18 4,8 - 7,3 - 9,7
26 27
PSB-90 PSB-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
=A+43
120 =A+2
80
=A-101
107,5
Odgonski modul ima pri izvedbi proge funkcijo
vraanja jermena k pogonskima moduloma.
PSB-90
Order Code 17BRU
28 29
PSB-90 PSB-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Dobava:
2x 10011 alumijasti profil (1) z zgornjim vodilnimi
profili(2).
Al Profil 45 x 90 L Al Profilo 45 x 90 L
1 10011 m
Al Profil 45 x 90 L Al Profil 45 x 90 L
17BPC Profil vodilni zgornji Profilo di scorr. superiore
In Verbindung mit Antriebsstationen 17BDMH 2 331405101017
Sliding profile upper Gleitprofile oben
m
oder 17BDML und Umlenkung 17 BRU bildet die 17BPG
Transportlinie. Jermen s=1,7mm pri 17BDML Cinghia s=1,7mm per 17BDML
Linie besteht aus Streckenprofil (1) aus eloxier- 3.1 17TT30X1.7AS
Belt s=1,7mm by 17BDML Gurt s=1,7mm bei 17BDML
tem Aluminium 10011, aus Gleitprofile (2) aus 17BCS m
Polyamid. Jermen 2,3 mm pri17BDMH Cinghia2,3 mm per 17BDMH
3.2 17TT30X2.3AS
Lieferumfang: Belt 2,3 mm by 17BDMH Gurt 2,3 mm bei 17BDMH
2 x Streckenprofil 10011 (1) mit montierte Linearni spoj Giunto lineare
Fhrungsprofile und Gleitprofile (2). 4 11095 pc.
Linear joint Linear Profilverbinder
Navojni zati M8 x14 Perno filettato M8 x 14
5 11034 pc.
Threaded insert M8 x 14 Gewindeeinsatz M8 x 14
30 31
PSC-90 | PSB-90 PSC-90 | PSB-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Podporne noge za PSC-90; PSB-90 Supporti tratto per PSC-90; PSB-90 Descrizione =A+16 =A+106 =(2*A)+C+32
Description Supporting leg for PSC-90; PSB-90 Streckensttzen fr PSC-90; PSB-90 Beschreibung =A+2 =A+16 C
=A-74 =A+2 =A+2 =A+2
Uporaba: Utilizzo:
Na podporne noge postavimo transportno progo. I supporti sostengono i tratti di trasporto rettilineo
Podporne noge morajo biti postavljene ob e, di norma, vengono montati in prossimit dei
pogonskem modulu, odgonskem modulu in pod moduli di azionamento e rinvio ed eventualmente
spojem transportne proge. Na transp. progi morajo nelle giunzioni dei tratti lunghi.
biti podporne noge postavljene enakomerno z max. Il numero di supporti pu essere ricavato dalla
H
razdaljo 2000mm.
seguente formula: L (L= lunghezza tot. linea
+1
Uporabna formula: L (L= dolina celotne (mm)) 2000
+1
linije (mm)) 2000 La fornitura comprende i piedi regolabili in altezza
_ 20
_ 20
_ 20
Profili so iz ekstrudiranega aluminija. Komplet e gli accessori di fissaggio alla linea.
70 +
70 +
70 +
vsebuje; podporne noge in kotnike z vijaki za pri- Per le esecuzioni speciali si prega di consultare il
H1
trditev transportne proge. nostro ufficio tecnico.
Za posebne izvedbe se posvetujte z nao tehnino
slubo.
Application: Verwendung:
Leg sets support the conveyor section. They have to Streckensttzen tragen die Frderstrecke. Sttzen 17NE 17ND 17NV
be mounted directly next to the drive, return units sind in unmittelbarer Nhe von Antrieb und
and underneath section joints. Conveyor units Unlenkung sowie unter Streckensten
are to be supported with extra leg sets in equal anzubringen. Bei Streckeneinheiten sind in
distances of max. 2000 mm. gleichmigem Abstand von max. 2000 mm
Streckensttzen zu montieren.
Useful formula: L (L= total track line (mm))
+1
2000 Nutzbare formel: L (L= Gesamtlnge Trans-
+1
Delivery consist of height-adjustable support feet, portlinie (mm)) 2000
incl. mounting material to install the leg sets. Inkl. hheneinstellbaren Standfen, inkl. Befesti-
For special designs please consult our technical gungsmaterial zur Montage der Streckensttze an
department. Frderstrecke.
Bei Sonderausfhrungen wenden Sie sich bitte an 6
unsere technische Abteilung.
PSC-90
PSC-90 PSB-90
Key Code 17NE 100 250 - -
1 2 3 4 5
PSB-90
Order Code Naziv Description Descrizione Beschreibung
11121 Kotnik temeljni Angolare di base Florbracket Bodenwinkel
6 11052 Matica s prir. Dado con flangia Flange nut Flanschmutter
11047 Vijak z kad. glavo Vite con testa a mar. Hammer head screw Hammerkopf Schraube
32 33
PSC-90 | PSB-90 PSC-90 | PSB-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
=A
-74
0
200 A
PSC-90 PSB-90
Key Code 17DI 240
irina palete Larghezza pallet
A min. 100 mm - 1.200 mm
Pallet width Palet Breite
The spacer serve to connect the conveyor section Mit den Distanzstck werden die Streckenprofile
profiles in transport line. miteinander verbunden.
The correct length of the spacer determines the Distanzstck definiert die Spurweite.
width of the line.
Anzahl der Distanzstck 17DI steigt abhngig von
The number of spacers 17DI is increasing StrekenBelastung
depending on Track Burdening.
34 35
PSR-50/60 PSR-50/60
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Za transport kosovnega in paletiziranega materiala ter Per il trasporto di materiali ingombranti e/o pallettizzati e 17RDML 17RDMH 17R NE ND 17RDMM
embalae razlinih materialov in dimenzij se v industriji di varie dimensioni pu essere usato il sistema di trasporto a
uporabljajo valjne proge raznih izvedb. rulli (rulliera) nelle varie configurazioni a disposizione.
-17 RDMH Gnana valjna proga veliki pogon -17 RDMH Rulliera ad azionamento modulo pesante
-17 RDML Gnana valjna proga - mali pogon -17 RDML Rulliera ad azionamento modulo leggero
-17 RDMM Gnana valjna proga z el. valjem -17 RDMM Rulliera ad azionamento con rullo eletrico
-17 RTR Negnana valjna proga -17 RTR Rulliera con rulli folli
Pri vseh navedenih valjnih progah lahko uporabimo Per tutte le rulliere possono essere utilizzati rulli con un
valje premera 50 ali 60mm, direktne, akumulacijske diametro di 50 o 60 mm, diretti, per accumulo ad alte pre-
izvedbe ali valje z nastavljivo sklopko. Dovoljena stazioni o con frizione regolabile.
obremenitev valjnih prog je do 500 kg/m. Carico ammesso sulla rulliera e fino a 500 kg/m.
Za posebne izvedbe valjnih prog kot so krivine ipd., se Per le rulliere di versioni speciali come ad esempio le curve,
obrnite na nao strokovno slubo. si prega di contattare il nostro ufficio tecnico.
For the transportation of bulky and palletized Fr den Transport von sperrigen und palettierten Material-
materials, and packaging from various materials and sizes, ien und Verpackungen der verschiedenen Materialien und
the industry uses various types of roller conveyors Abmessungen.
Die Industrie verwendet verschiedene Arten von Rollenbah-
-17 RDMH Driven roller conveyor - big drive nen
-17 RDML Driven roller conveyor - small drive
-17 RDMM Driven roller conveyor with el. roller -17 RDMH angetriebene Rollenbahn groe Antrieb
-17 RTR Not driven roller conveyor -17 RDML angetriebene Rollenbahn kleine Antrieb
-17 RDMM angetriebene Rollenbahn mit el. Rolle
For all those roller tracks can be used rollers with a diam- -17 RTR nicht angetriebene Rollenbahn
eter of 50 or 60mm, direct, execution for accumulation or
rollers with adjustable clutch. Fr alle diese Rollenbahnen knnen Rollen mit einem
Permissible load on the roller tracks up to 500 kg/m. Durchmesser von 50 mm oder 60 mm, direkt, Ausfhrung
fr die Akkumulation oder Rollen mit einstellbarer Kupplung
For special versions of roller tracks such as curved verwendet werden. Es dient fr Streckenlasten bis zu FG =
sections, etc, please contact our technical 500 kg/m.
department. Fr spezielle Versionen von Rollenbahnen wie gekrmmte
Abschnitte, Usw..., kontaktieren Sie bitte unsere technische
Abteilung.
PSR-50/60
Rollenbahn angetrieben mit ele. Rolle
pg. 46-47
36 37
PSR-50/60 PSR-50/60
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Gnana valjna proga - velik pogon Rulliera ad azion. modulo pesante Descrizione
Description Roller rails big drive Rollenbahn angetrieben groe Antrieb Beschreibung =A+78
145,7
C =A+5
167,2
P
max 569,2
max 513,5
pogonsko verigo dovoljuje izvedbo daljih valjnih prog
F
ter omogoa veje obremenitve.
Z vgradnjo akumulacijskih valjev se formira valjni
transporter za akumulacijo materiala do polne
zasedenosti linije.
1
Za sestavo proge uporabi priloeno tabelo.
4 C2 C1
PSR-50/60
Key Code 17RDMH 400 C1 2000 3 120 50 3,9
Il modulo di azionamento pesante e la trasmissione a A B C D E F G
catena tangenziale permette lesecuzione di rulliere piu
lunghe e permette carichi piu elevati. irina tovora Larghezza di carico
Con linstallazione dei rulli di accumulo si formano A min. 200 mm - max. 1.200 mm
Width of the load Ladung Breite
rulliere per l`accumulo del materiale fino alla completa
ocupazione della linea. Pozicija pogona Posizione motoriduttore C1= zunanji
B
Drive position Antriebsposition C2= notranji
Per la composizione della rulliera utilizzare la tabella
allegata. C Dolina proge Lunghezza del tratto
min. 460 mm - 15.000 mm
Track Lenght Streckenlnge
38 39
PSR-50/60 PSR-50/60
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Gnana valjna proga - veliki pogon Rulliera ad azion. modulo pesante Descrizione Naziv Gnana valjna proga - veliki pogon Rulliera ad azion. modulo pesante Descrizione
Description Driven roller conveyor - big drive Rollenbahn angetrieben groe Antrieb Beschreibung Description Driven roller conveyor - big drive Rollenbahn angetrieben groe Antrieb Beschreibung
7 4 5 10 8 6
10
3 1 9 2
1 Pogonski modul - velik Drive module - heavy Modulo d`azionamento - Pesante Umlenkung schwer
2 Odgon L Return unit Left Modulo di rinvio Sinistro Umlenkung Links
3 Odgon R Return unit Right Modulo di rinvio Destro Umlenkung Rehts 9
Valj z verinikom Roller with sprocket Rullo con pignone Rolle mit Kettenrad
4 7
50/60 mm 50/60 mm 50/60 mm 50/60 mm
5 Profil valj. proge Roller Rail profile Profilo per rulliera Rollenbahn profile
4
6 Profil vodilni iroki Guiding profile - wide Profilo di guida - largo Fhrungsprofil - breite
5
7 Profil vodilni ozki Guiding profile - narrow Profilo di guida - stretto Fhrungsprofil - schmal
40 41
PSR-50/60 PSR-50/60
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Gnana valjna proga - mali pogon Rulliera ad azion. modulo leggero Descrizione
Description Driven roller conveyor - small drive Rollenbahn angetrieben kleine Antrieb Beschreibung =A+78
145,7
C =A+5 135,8
E
max 569,2
F
Gnana valjna proga z malim pogonom in tangencialno
pogonsko verigo dovoljuje izvedbo krajih valjnih prog
ter manjih obremenitev.
Mit der Installation der Akkumulation Rollen wir Korak med valji Passo fra i rulli
erschaffen Rollenbahn fr Materialanhufung bis zur
E min 65 mm
Step between the rollers Schritt zwischen dem Walzen
vollstndigen Belegung der Linie.
Premer valja Diametro rullo
Fr die Zusammensetzung der Rollenbahn, verwenden
F 50 / 60
Roller Diameter Rollendurchmesser
Sie beigefgte Tabelle.
Hitrost Velocit
G 3,4 - 35 m/min
Velocity Geschwindigkeit
42 43
PSR-50/60 PSR-50/60
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
6 8 5 4
1 2
5
7
1 3 7 2
4
1 Pogon mali L / R Drive module small L/R Modulo d`azionamento - leggero Sinistro/ Destro Umlenkung Leicht L/R
2 Odgon L / R Return unit L / R Modulo di rinvio Sinistro / Destro Umlenkung L/R
Valj z verinikom Roller with sprocket Rullo con pignone Rolle mit Kettenrad
3
50/60 mm 50/60 mm 50/60 mm 50/60 mm
4 Profil valj. proge Roller Rail profile Profilo per rulliera Rollenbahn profile
5 Profil vodilni iroki Guiding profile - wide Profilo di guida profilo - largo Fhrungsprofil - breite 6
6 Profil vodilni ozki Guiding profile - narrow Profilo di guida profilo - stretto Fhrungsprofil - schmal
3
7 Zaita verige Chain Protection Protezione catena Kettenschutz
44 45
PSR-50/60 PSR-50/60
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Gnana valjna proga z el. valjem Rulliera azionata con rullo eletrico Descrizione
Description Driven roller conveyor with el. Roller Rollenbahn angetrieben mit ele. Rolle Beschreibung =A+78
145,7
B =A+5
C
fi-50
Pogonski el. gnani valj lahko poganja 9 valjev preko
jermena in je namenjen najkrajim valjnim progam.
PSR-50/60
Key Code 17RDMM 400 1000 120 4,5
Il motorullo attraverso la trasmissione a cinghia permette
di pilotare fino a 9 rulli ed e destinato per rulliere di A B C D
piccole dimensioni.
46 47
PSR-50/60 PSR-50/60
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
145,7
B =A+5
C
F
izdelkov ali embalae z ravno spodnjo povrino na osnovi
ronega pomika ali gravitacije.
48 49
PSR-50/60 PSR-50/60
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Uporaba: Utilizzo:
Na podporne noge postavimo transportno progo. I supporti sostengono i tratti di trasporto rettilineo =A+164
Podporne noge morajo biti postavljene ob e, di norma, vengono montati in prossimit dei =A+74
pogonskem modulu, odgonskem modulu in pod moduli di azionamento e rinvio ed eventualmente =A+5
spojem transportne proge. Na transp. progi morajo nelle giunzioni dei tratti lunghi.
biti podporne noge postavljene enakomerno z max. Il numero di supporti pu essere ricavato dalla
razdaljo 2000mm.
seguente formula: L (L= lunghezza tot. linea
+1
Uporabna formula: L (L= dolina celotne (mm)) 2000
H
+1
linije (mm)) 2000 La fornitura comprende i piedi regolabili in altezza
Profili so iz ekstrudiranega aluminija. Komplet e gli accessori di fissaggio alla linea.
H
vsebuje; podporne noge in kotnike z vijaki za pri- Per le esecuzioni speciali si prega di consultare il
_ 20
_ 20
trditev transportne proge. nostro ufficio tecnico.
70 +
H1
Za posebne izvedbe se posvetujte z nao tehnino
70 +
slubo.
Application: Verwendung:
Leg sets support the conveyor section. They have to Streckensttzen tragen die Frderstrecke. Sttzen
be mounted directly next to the drive, return units sind in unmittelbarer Nhe von Antrieb und
and underneath section joints. Conveyor units Unlenkung sowie unter Streckensten 17RNE 17RND
are to be supported with extra leg sets in equal anzubringen. Bei Streckeneinheiten sind in
distances of max. 2000 mm. gleichmigem Abstand von max. 2000 mm
Streckensttzen zu montieren.
Useful formula: L (L= total track line (mm))
+1
2000 Nutzbare formel: L (L= Gesamtlnge Trans-
+1
Delivery consist of height-adjustable support feet, portlinie (mm)) 2000
incl. mounting material to install the leg sets. Inkl. hheneinstellbaren Standfen, inkl. Befesti-
For special designs please consult our technical gungsmaterial zur Montage der Streckensttze an
department. Frderstrecke.
Bei Sonderausfhrungen wenden Sie sich bitte an
unsere technische Abteilung.
PSR-50/60
Key Code 17RNE 100 250 - -
1 2 3 4 5
50 51
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Prenosu palete iz vzdolne proge na preno Deviare in uscita i pallet da un tratto longitudi-
progo. nale
Prenosu palete iz prene proge na vzdolno ad un tratto trasversale.
progo. Deviare in entrata i pallet da un tratto trasversale
Prenosu palete med dvema progama razlinih ad un tratto longitudinale.
viin. Cambio di livello tra tratti di diversa altezza.
Vsi preni moduli imajo skupno to, da se v verti- Tutte le unita di svincolo hanno in comune il
kalni smeri pomikajo s pnevmatskim pogonom, movimento pneumatico verticale ed spostamento
horizontalen transport pa je elektrien. orizzontale elettrico.
Za posebne izvedbe se posvetujte z nao tehnino Per le esecuzioni speciali si prega di consultare il
slubo. nostro ufficio tecnico.
Transverse and vertical modules are used to: Die Hub-Quereinheiten haben die Aufgabe:
Move the workpiece pallets from a longitudinal Werkstcktrger von einer Lngsstrecke in eine
conveyor section to a transverse conveyor section. Querstrecke ausschleusen.
Move the workpiece pallets from a transverse Werkstcktrger von einer Querstrecke in eine
conveyor onto a longitudinal conveyor section. Lngsstrecke einschleusen.
Overcoming different heights of sections. berwindung unterschiedlichen hhen von
All lift transverse units have in common vertical strecken.
pneumatic movement and horizontal electrical Allen Hub-Quereinheiten gemeinsam ist die
movement. pneumatische Vertikalbewegung und elektrische
For special designs please consult our technical horizontale Transport.
department. Bei Sonderausfhrungen wenden Sie sich bitte an
unsere technische Abteilung.
52 53
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Modul preni 2 poz. jermenski Unita di svincolo a cinghia dentata a 2 posizioni Descrizione
Description Lift transverse unit with toothed belt 2 positions Hubquereinheit mit Zahnriemen mit 2 Positionen Beschreibung
Uporaba:
Prenos palete 17PA iz vzdolne proge na preno
progo. B A
Prenos palete 17PA iz prene proge na vzdolno
progo.
Pogon je izveden z zobatim jermenom.
Posebej naroiti:
2x el. stikalo za pnevmatski cilinder.
2x regulator pretoka za pnevmatski cilinder.
Application:
Transverse conveying of 17PA workpiece pallets
Outfeeds 17PA workpiece pallets from a
longitudinal section to a transverse section.
Infeeds workpiece pallets from a transverse
section to a longitudinal section.
Conveyor medium: toothed belt.
Required accessories:
2x sensor with insertion for pneum. cylinder.
2x flow micro-regulator for pneum. cylinder.
Utilizzo:
Trasporto trasversale dei pallet 17PA
Deviazione in uscita dei pallet 17PA da un tratto
longitudinale ad un tratto trasversale
Deviazione in entrata dei pallet 17PA da un tratto
trasversale ad un tratto longitudinale.
Mezzo di trasporto: cinghia dentata PSC-90 PSB-90
Accessori necessari:
2x sensore a scomparsa per cilindro pneumatico.
Key Code 17M2B 240 320 3,9
2x microregolatore di flusso per cilindro.
A B C
irina palete Larghezza pallet
Verwendung:
A min. 240 mm - max. 400 mm
Pallet width Palet Breite
Quertransport von Werkstcktrgern 17PA
Ausschleusen von Werkstcktrgern 17PA von Dolina palete Lunghezza pallet
B min. 240 mm - max. 640 mm
einer Lngsstrecke in eine Querstrecke, Pallet lenght Palet Lnge
Einschleusen von Werkstcktrgern17PA von
einer Querstrecke in eine Lngsstrecke.
Hitrost Velocit
C 3,9 - 23,3 m/min
Frdermittel: Zahnriemen. Velocity Geschwindigkeit
Erforderliches Zubehr: Obremenitev Carico B = 240 mm = max. 500 N
2x Einziehbaren Sensor fr Pneumatikzylinder.
2x Microregulator Flow fr Pneumatikzylinder. Burdening Belastung B > 240 mm = max. 800 N
Motor Reduktorji
Motor Reduction gear
Kw (m/min)
Motore Riduttore
Motor typ Reduktionsgetribe
BN63 B4 BN 14 VF30V P i =60; i=40; i=30 0,18 3,9 - 5,8 - 7,8
54 55
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Modul preni 3 poz. jermenski Unita di svincolo a cinghia dentata a 3 posizioni Descrizione
Description Lift transverse unit with toothed belt3 positions Hubquereinheit mit Zahnriemen mit 3 Positionen Beschreibung
Uporaba:
B A
Prenos palete 17PA iz vzdolne proge na preno
progo.
Prenos palete iz prene proge na vzdolno progo.
Pogon je izveden z zobatim jermenom.
Posebej naroiti:
4x el. stikalo za pnevmatski cilinder.
4x regulator pretoka za pnevmatski cilinder.
Application:
Transverse conveying of 17PA workpiece pallets
Outfeeds workpiece pallets from a longitudinal
section to a transverse section.
Infeeds workpiece pallets from a transverse
section to a longitudinal section.
Conveyor medium: toothed belt.
Required accessories:
4x sensor with insertion for pneum. cylinder.
4x flow micro-regulator for pneum. cylinders.
Utilizzo:
Trasporto trasversale dei pallet 17PA
Deviazione in uscita dei pallet da un tratto
longitudinale ad un tratto trasversale.
Deviazione in entrata dei pallet da un tratto
trasversale ad un tratto longitudinale.
Mezzo di trasporto: cinghia dentata. PSC-90 PSB-90
Accessori necessari: Key Code 17M3B 240 320 3,9
4x sensore a scomparsa per cilindro pneumatico.
4x microregolatore di flusso per cil. pneumatico. A B C
irina palete Larghezza pallet
A min. 240 mm - max. 400 mm
Verwendung: Pallet width Palet Breite
Quertransport von Werkstcktrgern 17PA Dolina palete Lunghezza pallet
Ausschleusen von Werkstcktrgern von einer B min. 240 mm - max. 640 mm
Pallet lenght Palet Lnge
Lngsstrecke in eine Querstrecke.
Einschleusen von Werkstcktrgern von einer Hitrost Velocit
Querstrecke in eine Lngsstrecke. C 3,9 - 23,3 m/min
Velocity Geschwindigkeit
Frdermittel: Zahnriemen.
Erforderliches Zubehr: Obremenitev Carico B = 240 mm = max. 500 N
4x Einziehbaren Sensor fr Pneumatikzylinder. Burdening Belastung B > 240 mm = max. 800 N
4x Microregulator Flow fr Pneumatikzylinder.
Motor Reduktorji
Motor Reduction gear
Kw (m/min)
Motore Riduttore
Motor typ Reduktionsgetribe
BN63 B4 BN 14 VF30V P i =60; i=40; i=30 0,18 3,9 - 5,8 - 7,8
56 57
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Modul preni 2 pozicijski z verigo Unita di svincolo a catena-2 posizioni Descrizione
Description Lift transverse unit with Chain-2 positions Hubquereinheit mit Kette-2 Positionen Beschreibung
Uporaba:
Prenos palete 17PA iz vzdolne proge na preno
progo.
Prenos palete iz prene proge na vzdolno progo.
B
Pogon je izveden z akumulacijsko verigo.
Posebej naroiti:
2x el. stikalo za pnevmatski cilinder.
2x regulator pretoka za pnevmatski cilinder.
A
Application:
Transverse conveying of 17PA workpiece pallets
Outfeeds workpiece pallets from a longitudinal
section to a transverse section.
Infeeds workpiece pallets from a transverse sec-
tion to a longitudinal section.
Conveyor medium: with accumulation chain.
Required accessories:
2x sensor with insertion for pneum. cylinder.
2x flow micro-regulator for pneum. cylinder.
PSC-90 PSB-90
Utilizzo:
Key Code 17M2C 370 370 3,9 R 3
Trasporto trasversale dei pallet 17PA A B C D E
Deviazione in uscita dei pallet da un tratto
longitudinale ad un tratto trasversale.
Deviazione in entrata dei pallet da un tratto irina palete Larghezza pallet
A min. 370 mm - max. 1.200 mm
trasversale ad un tratto longitudinale. Pallet width Palet Breite
Mezzo di trasporto: a catena.
Accessori necessari: Dolina palete Lunghezza pallet
B min. 370 mm - max. 1.200 mm
2x sensore a scomparsa per cilindro pneumatico. Pallet lenght Palet Lnge
2x microregolatore di flusso per cilindro.
Hitrost Velocit
C 3,9 - 23,3 m/min
Velocity Geschwindigkeit
Verwendung: Pozicija pogona Posizione motoriduttore L= leva-Left-sinistra-Links
D
Quertransport von Werkstcktrgern 17PA Drive position Antriebsposition R= desna-Right-destra-Rechts
Ausschleusen von Werkstcktrgern von einer
Lngsstrecke in eine Querstrecke.
Pozicija motoreduktorja Posizione motoriduttore
E 1-2-3-4
Einschleusen von Werkstcktrgern von einer Drive position Antriebsposition
Querstrecke in eine Lngsstrecke. Obremenitev Carico B = 370 - 400 mm = max. 800 N
Frdermittel: Kette.
Erforderliches Zubehr: Burdening Belastung B = 400 - 480 mm = max. 1.200 N
2x Einziehbaren Sensor fr Pneumatikzylinder. B > 480 mm = max. 1.800 N
2x Microregulator Flow fr Pneumatikzylinder.
Motor Reduktorji
Motor Reduction gear
Kw (m/min)
Motore Riduttore
Motor typ Reduktionsgetribe
BN63 B4 BN 14 VF30V P i =60; i=40; i=30 0,18 3,9 - 5,8 - 7,8
58 59
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Modul preni 3 pozicijski z verigo Unita di svincolo a catena-3 posizioni Descrizione
Description Lift transverse unit with Chain-3 positions Hubquereinheit mit Kette-3 Positionen Beschreibung
A
Uporaba: B
Prenos palete 17PA iz vzdolne proge na preno
progo.
Prenos palete iz prene proge na vzdolno progo.
Pogon je izveden z akumulacijsko verigo.
Posebej naroiti:
- 4x el. stikalo za pnevmatski cilinder.
- 4x regulator pretoka za pnevmatski cilinder.
Application:
Transverse conveying of 17PA workpiece pallets
Outfeeds workpiece pallets from a longitudinal
section to a transverse section.
Infeeds workpiece pallets from a transverse
section to a longitudinal section.
Conveyor medium: with accumulation chain.
Required accessories:
4x sensor with insertion for pneum. cylinder.
4x flow micro-regulator for pneum. cylinder. PSC-90 PSB-90
Key Code 17M3C 370 370 3,9 R 3
Utilizzo: A B C D E
Trasporto trasversale dei pallet 17PA
Deviazione in uscita dei pallet da un tratto
longitudinale ad un tratto trasversale.
Deviazione in entrata dei pallet da un tratto
trasversale ad un tratto longitudinale. irina palete Larghezza pallet
A min. 370 mm - max. 1.200 mm
Mezzo di trasporto: catena con rulli. Pallet width Palet Breite
Accessori necessari:
Dolina palete Lunghezza pallet
4x sensore a scomparsa per cilindro pneumatico. B min. 370 mm - max. 1.200 mm
4x microregolatore di flusso per cil. pneumatico. Pallet lenght Palet Lnge
Hitrost Velocit
C 3,9 - 23,3 m/min
Verwendung: Velocity Geschwindigkeit
Quertransport von Werkstcktrgern 17PA Pozicija pogona Posizione motoriduttore L= leva-Left-sinistra-Links
Ausschleusen von Werkstcktrgern von einer D
R= desna-Right-destra-Rechts
Lngsstrecke in eine Querstrecke. Drive position Antriebsposition
Einschleusen von Werkstcktrgern von einer Pozicija motoreduktorja Posizione motoriduttore
Querstrecke in eine Lngsstrecke. E 1-2-3-4
Drive position Antriebsposition
Frdermittel: Kette.
Erforderliches Zubehr: Obremenitev Carico B = 370 - 400 mm = max. 800 N
4x Einziehbaren Sensor fr Pneumatikzylinder. Burdening Belastung B = 400 - 480 mm = max. 1.200 N
4x Microregulator Flow fr Pneumatikzylinder. B > 480 mm = max. 1.800 N
Motor Reduktorji
Motor Reduction gear
Kw (m/min)
Motore Riduttore
Motor typ Reduktionsgetribe
BN63 B4 BN 14 VF30V P i =60; i=40; i=30 0,18 3,9 - 5,8 - 7,8
60 61
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Modul preni 2 poz. jermenski Unita di svincolo a cinghia dentata a 2 posizioni Descrizione
Description Lift transverse unit with toothed belt 2 positions Hubquereinheit mit Zahnriemen mit 2 Positionen Beschreibung
Uporaba:
Prenos tovora iz vzdolne proge na preno progo. A
Prenos tovora iz prene proge na vzdolno progo.
Pogon je izveden z zobatim jermenom. B
Posebej naroiti:
2x el. stikalo za pnevmatski cilinder.
2x regulator pretoka za pnevmatski cilinder.
Application:
Transverse conveying of load
Outfeeds of load from a longitudinal
section to a transverse section.
Infeeds of load from a transverse section to a l
ongitudinal section.
Conveyor medium: toothed belt.
Required accessories:
2x sensor with insertion for pneum. cylinder.
2x flow micro-regulator for pneum. cylinder.
Utilizzo:
Trasporto trasversale di carico
Deviazione in uscita del carico da un tratto longi-
tudinale ad un tratto trasversale
Deviazione in entrata del carico da un tratto
trasversale ad un tratto longitudinale.
Mezzo di trasporto: cinghia dentata PSR-50/60
Accessori necessari: Key Code 17RM2B 240 320 3,9
2x sensore a scomparsa per cilindro pneumatico.
2x microregolatore di flusso per cilindro.
A B C
Motor Reduktorji
Motor Reduction gear
Kw (m/min)
Motore Riduttore
Motor typ Reduktionsgetribe
BN63 B4 BN 14 VF30V P i =60; i=40; i=30; i=20; i=15; i=10 0,18 3,9 - 5,8 - 7,8 11,7 - 15,5 - 23,3
62 63
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Posebej naroiti:
2x el. stikalo za pnevmatski cilinder.
2x regulator pretoka za pnevmatski cilinder.
El. dvigalo 17DE uporabljamo pri vejih hodih in
H2
med vejim tevilom prog.
Za ve informacij se obrnite na tehnino slubo
podjetja Lipro.
H1
Pneumatic elevator 17DP is used for shorter strokes
and between two tracks.
Required accessories:
2x sensor with insertion for pneum. cylinder.
2x flow micro-regulator for pneum. cylinder. 370 550
Electric elevator 17DE is used for longer strokes
and between more tracks.
Please contact your Lipro sales office.
Accessori necessari:
2x sensore a scomparsa per cilindro pneumatico.
2x microregolatore di flusso per cilindro. DE DP
L elevatore elettrico 17DE si usa per corse
pi lunghe e tra pi tratti a diverse altezze.
Per qualsiasi dubbio sono a disposizione i nostri PSC-90 PSB-90 PSR-50/60
uffici tecnico-commerciali. Key Code 17DE - -
17DP 240 800
Pneumatische Aufzug 17DP wird fr krzere Hbe
und zwischen zwei Strecken verwendet. H1 H2
Erforderliches Zubehr: Viina Altezza
2x Einziehbaren Sensor fr Pneumatikzylinder. H1 min. 200 mm
2x Microregulator Flow fr Pneumatikzylinder.
Height Hhe
Elektrischer Aufzug 17DE fr lngere Hbe und Viina Altezza
zwischen mehreren Spuren verwendet. H2 17DP max. 1.200 mm
Height Hhe
Wir empfehlen eine Rcksprache mit Ihrer
Lipro-Fachvertretung. Obremenitev Carico
max. 1.000 N
Burdening Belastung
Viina Altezza
H1
Height Hhe Prosim, obrnitese na nao strokovno slubo.
Viina Altezza Please contact our technical department.
H2 17DE Si prega di contattare il nostro ufficio tecnico.
Height Hhe Kontaktieren Sie bitte unsere technische Abteilung.
Obremenitev Carico
Burdening Belastung
64 65
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Pri delovnih operacijah, kjer potrebujemo Per la lavorazione e losservanza delle tolleranze
natanno pozicioniranje in orientacijo, moramo di produzione i pallet devono essere arrestati e
palete ustaviti in pozicionirati. To izvedemo z posizionati nella stazione di lavorazione.
vgradnjo pozicionirnih modulov na transportno
progo. A seconda dellesecuzione dellunit di posiziona-
mento, il pallet pu essere posizionato con una
Glede na izgradnjo pozicionirnega modula lahko precisione fino a 0,1 mm.
doseemo natannost do 0,1 mm. Per le esecuzioni speciali si prega di consultare il
Za posebne izvedbe se posvetujte z nao tehnino nostro ufficio tecnico.
slubo.
In order to process and maintain manufacturing Zur Bearbeitung und Einhaltung von Fertigungsto-
tolerances, workpiece pallets must be stopped and leranzen mssen Werkstcktrger angehalten und
positioned in the processing station. in der Bearbeitungsstation positioniert werden.
Depending on the design, the position unit can Je nach Ausfhrung der Positioniereinheit kann der
move the workpiece pallets with an accuracy Werkstcktrger bis 0,1 mm genau Positioniert
of 0.1 mm. werden.
For special designs please consult our technical Bei Sonderausfhrungen wenden Sie sich bitte an
department. unsere technische Abteilung.
Modul centrirni
Positioning module 17CM
Modulo di posizionamento
Positioniereinheit pg.
68-69
66 67
PSC-90 PSC-90
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Posebej naroiti:
2x el. stikalo za pnevmatski cilinder.
2x regulator pretoka za pnevmatski cilinder.
A
B
ordered separately:
2x sensor with insertion for pneum. cylinder.
2x flow micro-regulator for pneum. cylinder.
da ordinare separatamente:
2x sensore a scomparsa per cilindro pneumatico.
2x microregolatori di flusso per cilindro.
PSC-90 PSB-90
Key Code 17CM 160 160 30
Positionierung eines Werkstcktrgers in einer
manuellen/automatischen Bearbeitungsstation mit A B H
hohen Anforderungen an die Positioniergenauigkeit
( 0,1 mm). Verwendbar mit allen irina palete Larghezza pallet
Werkstcktrgern A min. 160 mm - max. 800 mm
Hubhhe muss definiert werden (H). Pallet width Palet Breite
Dolina palete Lunghezza pallet
separat bestellen: B min. 160 mm - max. 800 mm
Lenght pallet Palet Lnge
2x Einziehbaren Sensor fr Pneumatikzylinder.
2x Microregulator Flow fr Pneumatikzylinder. Hod standard Corsa standard
30 mm
Standard stroke Hub standard
H
Hod Corsa
min. 30 mm - max. 400 mm
Stroke Hub
Obremenitev Carico B = 160 - 240 mm = max. 800 N
Burdening Belastung B = 240 - 400 mm = max. 1.200 N
B > 400 mm = max. 1.800 N
68 69
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Posebej naroiti:
4x el. stikalo za pnevmatski cilinder.
4x regulator pretoka za pnevmatski cilinder.
ordered separately:
4x sensor with insertion for pneum. cylinder.
4x flow micro-regulator for pneum. cylinder.
da ordinare separatamente:
4x sensore a scomparsa per cilindro pneumatico.
4x microregolatori di flusso per cilindro.
PSC-90 PSB-90
Die Hub-Dreheinheit (17OM) dreht den Werk- Key Code 17OM 160 160 50
stcktrger in die gewnschte Orientierung. Bei
Umlaufsystemen ohne Kurven kann sie fr eine A B H
gleichbleibende Orientierung des Werkstcktrgers
sorgen, d. h. vorne bleibt vorne. irina palete Larghezza pallet
A min. 160 mm - max. 800 mm
Drehwinkel um die 0-180. Pallet width Palet Breite
Trgheitsmoment: max. 22Nm.
Dolina palete Lunghezza pallet
B min. 160 mm - max. 800 mm
separat bestellen: Pallet lenght Palet Lnge
4x Einziehbaren Sensor fr Pneumatikzylinder.
Hod standard Corsa standard
4x Microregulator Flow fr Pneumatikzylinder. 50 mm
Standard Stroke Hub standard
H
Hod Corsa
min. 50 mm - max. 400 mm
Stroke Hub
Obremenitev Carico B = 160 - 240 mm = max. 800 N
Burdening Belastung B = 240 - 400 mm = max. 1.200 N
B > 400 mm = max. 1.800 N
70 71
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Centrirno obraalni modul 180 Modulo di posiz. e rotazione 180 Descrizione
Description Lift Positioning - rotate unit 180 Positionierung und Drehmodul 180 Beschreibung
ordered separately:
4x el. stikalo za pnevmatski cilinder.
4x regulator pretoka za pnevmatski cilinder. B
A
Positions a workpiece pallet in a manual/automatic
processing station with high positioning accuracy
requirements ( 0.1 mm). Usable with all work-
piece pallets. Lifting height to be defined (H).
Turning angles of 0-180.
Maximum mass moment of inertia for 22Nm.
Required accessories:
4x sensor with insertion for pneum. cylinder.
4x flow micro-regulator for pneum. cylinder.
da ordinare separatamente:
4x sensore a scomparsa per cilindro pneumatico.
4x microregolatori di flusso per cilindro. PSC-90 PSB-90
Key Code 17COM 160 160 50
A B H
Pozicionierbereich von werkstcktrger im
manuellen oder automatischen arbeitsprozess, wo
brauchen wir genaue positionierung ( 0,1 mm).
Verwendbar mit allen werkstcktrgern
Drehwinkel um die 0-180. irina palete Larghezza pallet
Trgheitsmoment: max. 22Nm.
A min. 160 mm - max. 800 mm
Pallet width Palet Breite
separat bestellen: Dolina palete Lunghezza pallet
B min. 160 mm - max. 800 mm
4x Einzienbaren Sensor fr Pneumatikzylinder. Lenght pallet Palet Lnge
4x Microregulator Flow fr Pneumatikzylinder.
Hod standard Corsa standard
50 mm
Standard Stroke Hub standard
H
Hod Corsa
min. 50 mm - max. 400 mm
Stroke Hub
Obremenitev Carico B = 160 - 240 mm = max. 800 N
Burdening Belastung B = 240 - 400 mm = max. 1.200 N
B > 400 mm = max. 1.800 N
72 73
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Upravljalni elementi imajo nalogo nadzora in I moduli di gestione del comando di trasporto
krmiljenja palet v gibanju. servono a manipolare il flusso dei pallet nel sistema
Krmiljenje palet pomeni ustavljanje in loevanje di trasferimento.
palet, ugotavljanje pozicije palete, kontrola procesa Il comando di trasporto comprende p. es. larresto
in drugo. e la singolarizzazione dei pallet, il sensore di
Za posebne izvedbe se posvetujte z nao tehnino posizione di un pallet, il controllo dei processi di
slubo. funzionamento ecc.
Per le esecuzioni speciali si prega di consultare il
nostro ufficio tecnico.
The modular units for transportation control are Die Baueinheiten zur Transportsteuerung dienen
used to control the flow of the workpiece pallets on der Steuerung des Werkstcktrgerflusses auf dem
the transfer system. Transfersystem.
This involves stopping and separating pallets, Die Transportsteuerung beinhaltet z.B. Anhalten
determine the position of workpiece pallets, und Vereinzeln von Werkstcktrgern, Abfragen
controlling all process function, etc. der Position eines Werkstcktrgers, Steuern von
For special designs please consult our technical Funktionsablufen usw.
department. Bei Sonderausfhrungen wenden Sie sich bitte an
unsere technische Abteilung.
74 75
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv toper standardni Stopper standard Descrizione Naziv toper preni Stopper trasversale Descrizione
Description Stopper standard Stopper standard Beschreibung Description Stopper transverse Stopper quer Beschreibung
PSC-90 PSB-90
Order Code 17SS 000 PSC-90 PSB-90
Order Code 17SP 000
17SA 000*
toper z amortizerjem Stopper con ammortizzatore
* Stopper with buffer Stopper mit Puffer
Uporaba: Utilizzo:
Ustavljanje ene ali ve palet na doloenih lokacijah. Arresto di uno o pi pallet in avanzamento su Uporaba: Utilizzo:
Dovoljena maksimalna obremenitev palet skupaj superfici di arresto definite.
je 200 kg pri hitrosti transporta 6m/min. Carico del pallet consentito fino a 200 kg Ko na vzdolno progo prikljuimo dve preni progi Quando la linea longitudinale viene collegata con
alla velocit di trasporto 6 m/min. . due tratti trasversali.
Dobava: Fornitura:
Kit vsebuje vijake za pritrditev na transportno Incluso materiale di fissaggio per il montaggio su
progo. tratto di trasporto.
*17SA 000 opcija toperja z amortizerjem. *17SA 000 opzione stopper con ammortizattore.
Application: Verwendung:
Stops one or more workpiece pallets at the defined Stoppen eines oder mehrerer auflaufender Application: Verwendung:
stop surface of the workpiece pallet. Werkstcktrger an der definierten Positionen
Workpiece pallet load of up to 200 kg by Werkstcktrgerlast bis 200 kg zulssig bei When to the longitudinal line we connect two Wenn dieLngstrecke mit zwei Querstrecken
conveying speed 6 m/min. Frdergeschwindigkeit 6 m/min. transverse track. Verbinden ist.
Delivery: Lieferumfang:
Incl. all fastening hardware to mount on the con- Inkl. Befestigungsmaterial zur Montage an
veyor section. Frderstrecke.
*17SA 000 option Stopper with buffer. *17SA 000 Option Stopper mit Puffer.
76 77
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Protipovratnik Blocco antiritorno Descrizione Naziv Nosilec senzorja za toper Portasensore per stopper Descrizione
Description Anti-return block Rcklaufsperre Beschreibung Description Sensor bracket for stopper Schalterhalter fr stopper Beschreibung
Application: Verwendung: Used to fasten a proximity switch M12 x 1. Befestigung fr einen Nherungsschalter M12 x 1.
In connection with non-cushioned stop gates, the In Verbindung mit ungedmpften Vereinzelern Die Kit includes mounting material. Kit inkl. Befestigungsmaterial zur montage.
Anti-return block prevents the rebound impact of Rcklaufsperre verhindert ein Zurckprallen des
the workpiece pallet from the stop gate. Werkstcktrgers vom Vereinzeler. Material: PA. Material: PA.
78 79
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
NOTES:
Naziv toper valjev Stopper per rulli Descrizione
Description Stopper for Roller Stopper fr Rollen Beschreibung
PSR-50/60
Order Code 17RST
Uporaba: Utilizzo:
zaustavlja akumulacijske valje na gnani valjni Arresta rulli di accumulo sulla linea ad azziona-
progi. mento.
Application: Verwendung:
It stops accumolation rollers on driven roller line. Es stoppt Akkumulation Rollen auf angetriebenen
Rollenbahn
80 81
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Nosilec senzorja horizontalni Portasensore orizzontale Descrizione Naziv Nosilec senzorja vertikalni Portasensore verticale Descrizione
Description Switch bracket horizontal Schalterhalter horizontal Beschreibung Description Switch bracket vertical Schalterhalter vertikal Beschreibung
Za senzor M12 x 1. Il portasensore orizzontale accoglie un sensore di Za senzor M12 x 1. Il portasensore verticale accoglie un sensore di
Namenjen tudi za ustavitev palete. prossimita M12 x 1 e funge anche da arresto pallet. prossimita M12 x 1.
Kit vsebuje vijake za pritrditev na toper.
Kit vsebuje vijake za pritrditev na toper. Il kit comprende gli accessori di montaggio. Il kit comprende gli accessori di montaggio.
Material: PA.
Material: pocinkano jeklo. Materiale: acciaio zincato. Materiale: PA
Used to fasten a proximity switch M12 x 1. Befestigung fr einen Nherungsschalter M12 x 1. Used to fasten a proximity switch M12 x 1. Befestigung fr einen Nherungsschalter M12 x 1.
Also intended to stop pallets. Auch zur stoppen vom Werkstcktrger
ausgerichtet. Kit includes mounting material. Kit inkl. Befestigungsmaterial zur montage.
Kit includes mounting material.
Kit inkl. Befestigungsmaterial zur montage. Material: PA. Material: PA.
Material: zinc steel.
Material: stahl-verzinkt.
82 83
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Prehodni valjki Rulli di transizione Descrizione Naziv Vezni spoj I Giunto I Descrizione
Description Transition Rollers bergangrollers Beschreibung Description Connecting junction I Verbindungsanschluss I Beschreibung
Uporaben z dvema prenima moduloma za prenos Il tratto di trasporto a rulli folli viene utilizzato a Vezni spoj za 17CDML / 17BDML Giunto per
palete med dvema vzdolnima transportnima supporto di 2 unit di svincolo per il trasferimento ali 17CRU / 17BRU na progo 17CDML / 17BDML o 17CRU / 17BRU sulla linea
progama. trasversale del pallet tra 2 tratti di linea paralleli.
Kit vsebuje vijake za pritrditev na transportni La fornitura comprende anche gli accessori di
progi. fissaggio alle linee. Dobava: Fornitura:
Used in combination with two lift transverse units In Verbindung mit zwei Hub-Querenheiten zum Connecting junction for Verbindungsanschluss fr
to convey workpiece pallets between parallel bertragung des Werkstcktrgers zwischen zwei 17CDML / 17BDML or 17CRU / 17BRU on line 17CDML / 17BDML oder 17CRU / 17BRU auf der
conveyor sections. parallelen Lngstrecken.
Strecke
Kit incl. mounting material to install between two Kit inkl. Befestigungsmaterial zur Montage zwis-
sections. chen zwei Strecken. Delivery:
Lieferumfang:
- 2x connecting plates
- Joining elements - 2x Verbindungs platte
- Verbindungselemente
84 85
Transport Systems Transport Systems
Transport lines and flexible constructions in automation Transport lines and flexible constructions in automation
Naziv Vezni spoj II Giunto II Descrizione Naziv Vezni spoj III Giunto per III Descrizione
Description Connecting junction II Verbindungsanschluss II Beschreibung Description Connecting junction for 17PM and 17OD Verbindungsanschluss fr 17PM und 17OD Beschreibung
Lieferumfang: Lieferumfang:
Delivery: Delivery:
- 2x Verbindungs platte - 2x Verbindungs platte
- 2x connecting plates - 2x connecting plates
- Verbindungselemente - Verbindungselemente
- Joining elements - Joining elements
86 87
Transport Systems
Transport lines and flexible constructions in automation
Distributors
BULGARIA BRAZIL CZECH REPUBLIC
Ka Matic Ltd. Metal Work Pneumatica do Brasil Ltda. Metal Work Pneumatic CZ, s.r.o.
9N, Kuklensko shose Blvd. Av. Thomaz Edison, 2648 Scharlau Ostravska 494
4004 PLOVDIV Sao Leopoldo/RS CEP 93125-140 73925 SVIADNOV
+359 32 677 772 +5551 3590 7100 + 420-596-748-577
+359 32 677 774 +5551 3590 7111 + 420-596-728-010
info@kamatic.com hernane@metalwork.com.br info@metalwork.cz
www.kamatic.com www.metalwork.com.br www.metalwork.cz
www.atfautomation.com
www.promatecsolutions.co.uk www.neumaticar.com
Agent
ITALY ITALY
Ivano Olivetto Alessandro Barretta
AVIANO ( PN) MILANO (MI)
+ 39 334 651 9101 + 39 335 8757 423
+39 0434 65 7144 + 39 0362 582 691
ivano.olivetto@alice.it alessandro-barretta@tiscali.it
ivano.olivetto ale.barretta
www.rappresentanze-olivetto.com
88
LIPRO d.o.o.
Dekani 20 A,
6271 Dekani, SLOVENIJA (EU)
+ 386 (0)5 625 13 43
+ 386 (0)5 625 13 44
info@lipro.si
www.lipro.si
WORLD - WIDE