Professional Documents
Culture Documents
BUILDING
Item No. Description - Open Shed Building Qty. Unit Unit Cost
A. Foundation/Column/Tiebeam
a.1 Cement 63 bgs.
a.2 Sand 2.18 cu.m.
a.3 3/4" Gravel 6.74 cu.m.
a.4 12mm dia. x 6m Deformed round bar 12 Le
a.5 16mm dia. x 6m Deformed round bar 20 Le
a.6 10mm dia. x 6m Deformed round bar 24 Le
a.7 #16 G.I. Tiewire 9.5 kgs.
B. Slab-on-ground
b.1 Cement 53 bgs.
b.2 Sand 3 cu.m.
b.3 3/4" Gravel 5.62 cu.m.
b.4 10mm dia. x 6m Deformed round bar 40 Le
b.5 Polyethylene sheet (8 mils) 40 ln-m
b.6 #16 G.I. Tiewire 2 kgs.
b.7 Tile adhesive (25kg./bg.) 12 bgs.
b.8 Tile Grout (2 kg./bg.) 4 bgs.
b.9 Concrete pavers 150 pcs.
C. Roof Framing
c.1 2mm thk. x 2" x 4" x 6m Cee Purlins 9 Le
c.2 2mm thk. x 2" x 3" x 6m Cee Purlins 12 Le
c.3 1/4" thk. x 2" x 6" x 6m Channel bar 6 Le
c.4 12mm dia. x 6m Plain round bar 8 Le
c.5 12mm dia. std. Turn buckle 8 pcs.
D. Tinsmithry
d.1 0.5mm thk. Rib type pre-painted longspan roofing 80 ln-m
d.2 2 1/2" Teckscrew 200 pcs.
d.3 Vulca Seal 1 gal.
d.4 Ga. 24 G.I. x 8' Pre-painted gutter (pre-bended) 5 pcs.
d.5 Ga. 24 G.I. x 8' Pre-painted flushing (pre-bended) 11 pcs.
d.6 3" dia. x 3m PVC pipe 4 Le
d.7 3" dia. Basket strainer 3 pcs.
d.8 3" dia. x 45 deg. bend PVC elbow 3 pcs.
d.9 3" dia. x 90 deg. bend PVC elbow 3 pcs.
d.10 Double sided Aluminum Insulation foam (50m/roll) 2 rolls
d.11 #16 G.I. Tiewire for insulation support 5 kgs.
E. Oranamental wall
e.1 4" CHB 54 pcs.
e.2 12mm dia. x 6m Deformed round bar 4 Le
e.3 Cement 9 bgs.
e.4 Sand 0.562 cu.m.
e.5 0.15m x 0.3m Wall cladding (stone type) 192 pcs.
e.6 Tile Adhesive (25kg./bg.) 8 bgs.
F. Painting works
RTER AND OPEN SHED
Cost
BILL OF MATERIALS FOR THE PROPOSED STUDIO ROOM, STOCK ROOM, MAID'S QUARTER AND OPEN SHED
BUILDING
Item No. Description - Studio Building Qty. Unit Unit Cost Cost
A. Foundation/Column/Tiebeam
a.1 Cement 109 bgs.
a.2 Sand 6 cu.m.
a.3 3/4" Gravel 13.5 cu.m.
a.5 16mm dia. x 6m Deformed round bar 108 Le
a.6 10mm dia. x 6m Deformed round bar 105 Le
a.7 #16 G.I. Tiewire 20 kgs.
B. Slab-on-ground
b.1 Cement 55 bgs.
b.2 Sand 3 cu.m.
b.3 3/4" Gravel 12.7 cu.m.
b.4 10mm dia. x 6m Deformed round bar 35 Le
b.5 Polyethylene sheet (8 mils) 75 ln-m
b.6 #16 G.I. Tiewire 2 kgs.
b.7 Tile adhesive (25kg./bg.) 7.4 bgs.
b.8 Tile Grout (2 kg./bg.) 7 bgs.
b.9 0.6m x 0.6m Ceramic matte tiles 156 pcs.
C. Ceiling works
c.1 3.5mm thk. x 4' x 8' Ficem board (hardiflex) 23 sht.
c.2 0.4mm thk. x 25mm x 2.44m G.I. Wall angle 22 Le
c.3 0.4mm thk. x 19mm x 50mm x 5m Metal furring 16 Le
c.4 12mm x 38mm x 1mm thk. x 5m Carrying channel 11 Le
c.5 W-clip (double) 384 pcs.
c.6 Metal ventilation gratings 1 lot
c.7 Cement 13.5 bgs.
c.8 Sand 0.75 cu.m.
c.9 3/4" Gravel 1.5 cu.m.
c.10 Plexibond compound #7760 1 gal.
c.11 12mm dia. x 6m Deformed round bar 25 Le
c.12 #16 G.I. Tiewire 3 kgs.
D. Walls and partitions/Doors/windows/glazing
d.1 6" CHB 825 pcs.
d.2 4" CHB 425 pcs.
d.3 Cement 154 bgs.
d.4 Sand 11.29 cu.m.
d.5 12mm dia. x 6m Deformed round bar 100 Le
d.6 #16 G.I. Tiewire 4 kgs.
d.7 0.15m x 0.3m Wall cladding (stone type) 144 pcs.
d.8 Tile Adhesive (25kg./bg.) 6 bgs.
d.9 Doors and windows w/ accessories 1 lot
E. Kitchen countertop
e.1 4" CHB 35 pcs.
e.2 Cement 4 bgs.
e.3 Sand 0.36 cu.m.
e.4 0.2 x 0.2 Vitrified tiles 30 pcs.
e.5 12mm dia. x 6m Deformed round bar 4 Le
e.6 #16 G.I. Tiewire 1 kgs.
e.7 Tile trims 7 ln-m
e.8 Fixtures (1 set) 1 lot
e.9 3/4" thk. x 4' x 8' Marine Plyboard 2 sht.
e.10 Concealed hinge 8 pcs.
e.11 Stainless door pull 4 pcs.
e.12 2" x 2" x 10' Good lumber 2 pcs.
e.13 1/2" SS Angle Valve 1 pcs.
e.14 Tile Grout (2 kg./bg.) 1 bgs.
F. Roof Framing
f.1 Cement 9 bgs.
f.2 Sand 0.5 cu.m.
f.3 3/4" Gravel 1 cu.m.
f.4 16mm dia. x 6m Deformed round bar 20 Le
f.5 10mm dia. x 6m Deformed round bar 17 pcs.
f.6 #16 G.I. Tiewire 5 kgs.
f.7 3mm thk. x 2" x 6m Angle bar 19 Le
f.8 2mm thk. x 2" x 3" x 6m Cee Purlins 21 Le
G. Tinsmithry
g.1 Ga. 26 x 3' x 10' G.I. corrugated roofing 34 sht.
g.2 2 1/2" Teckscrew 300 pcs.
g.3 Vulca Seal 1.5 gal.
g.4 0.4mm thk. x 8' Pre-painted gutter (pre-bended) 3 pcs.
g.5 0.4mm thk. x 8' Pre-painted flushing (pre-bended) 14 pcs.
g.6 3" dia. x 3m PVC pipe 3 Le
g.7 3" dia. Basket strainer 3 pcs.
g.8 3" dia. x 45 deg. bend PVC elbow 3 pcs.
g.9 3" dia. x 90 deg. bend PVC elbow 3 pcs.
H. Plumbing works
h.1 12mm dia. x 4m PPR Pipe 6 Le
h.2 12mm dia. PPR plain elbow 3 pcs.
h.3 12mm dia. PPR elbow female adaptor 1 pcs.
h.4 12mm dia. PPR coupling 5 pcs.
h.5 3" dia. x 3m PVC pipe 6 Le
h.6 3" dia. x 90 deg. bend PVC elbow 3 pcs.
h.7 Faucet 1 pcs.
h.8 3" dia. PVC Clean-out w/ plug 1 pcs.
h.9 Solvent cement 100cc 4 pcs.
I. Painting works
i.1 Masonry putty B-7311 3 gal.
i.2 2" Mesh Tape 3 pcs.
i.3 Permacoat Flat-Latex B-701 14 gal.
i.4 #9 Roller brush 7 pcs.
i.5 #9 Paint tray 3 pcs.
i.6 Masonry neutralizer #44 3 gal.
i.7 Acrytex primer #1705 0.5 gal.
i.8 Acrytex reducer #1750 1 gal.
i.9 Acrytex cast #1711 0.5 gal.
i.10 Acrytex Flat #1701 0.5 gal.
i.11 Assorted sand paper 1 lot
i.12 Epoxy Primer 1 gal.
i.13 Epoxy Reducer 1 gal.
i.14 Waste rugs 1 lot
i.15 Lacquer thinner 1 gal.
J. Consumables and Misc. items
j.1 3/16" Blind rivets 2 box
j.2 3/16" Metal drill bit 2 pcs.
j.3 14" Cutting disk 1 pcs.
j.4 6" Grinding stone 2 pcs.
j.5 6013 Welding rod 5 kgs.
j.6 #4 Concrete nails 0.5 kgs.
j.7 1 1/2" Finishing nails 0.5 kgs.
j.8 1" Teflon 3 pcs.
j.9 4" Diamond cutter 2 pcs.
j.10 Assorted C.W.N. 2 kgs.
j.11 4" Cutting disk 3 pcs.
BILL OF MATERIALS FOR THE PROPOSED STUDIO ROOM, STOCK ROOM, MAID'S QUARTER AND OPEN SHED
BUILDING
Cost
BILL OF MATERIALS FOR THE PROPOSED STUDIO ROOM, STOCK ROOM, MAID'S QUARTER AND OPEN SHED
BUILDING
Item No. Description - Studio Building Qty. Unit Unit Cost Cost
A. Foundation/Column/Tiebeam
a.1 Cement 24 bgs.
a.2 Sand 1.286 cu.m.
a.3 3/4" Gravel 2.876 cu.m.
a.5 12mm dia. x 6m Deformed round bar 16 Le
a.6 10mm dia. x 6m Deformed round bar 30 Le
a.7 #16 G.I. Tiewire 4.5 kgs.
B. Slab-on-ground
b.1 Cement 11 bgs.
b.2 Sand 0.6 cu.m.
b.3 3/4" Gravel 1.77 cu.m.
b.4 10mm dia. x 6m Deformed round bar 7 Le
b.5 Polyethylene sheet (8 mils) 20 ln-m
b.6 #16 G.I. Tiewire 1 kgs.
C. Ceiling works
c.1 3.5mm thk. x 4' x 8' Ficem board (hardiflex) 7 sht.
c.2 0.4mm thk. x 25mm x 2.44m G.I. Wall angle 11 Le
c.3 0.4mm thk. x 19mm x 50mm x 5m Metal furring 13 Le
c.4 12mm x 38mm x 1mm thk. x 5m Carrying channel 8 Le
c.5 W-clip (double) 216 pcs.
c.6 Metal ventilation gratings 1 lot
D. Walls and partitions/Doors/Glazing
d.1 4" CHB 663 pcs.
d.2 Cement 80 bgs.
d.3 Sand 6 cu.m.
d.4 12mm dia. x 6m Deformed round bar 35 Le
d.5 #16 G.I. Tiewire 1.6 kgs.
d.6 Doors and windows 1 lot
E. Roof Framing
e.1 Cement bgs.
e.2 Sand cu.m.
e.3 3/4" Gravel cu.m.
e.4 12mm dia. x 6m Deformed round bar Le
e.5 10mm dia. x 6m Deformed round bar pcs.
e.6 #16 G.I. Tiewire kgs.
e.7 2mm thk. x 2" x 4" x 6m Cee Purlins Le
e.8 2mm thk. x 2" x 3" x 6m Cee Purlins Le
G. Tinsmithry
g.1 Ga. 26 x 3' x 10' G.I. corrugated roofing sht.
g.2 2 1/2" Teckscrew pcs.
g.3 Vulca Seal gal.
g.4 0.4mm thk. x 8' Pre-painted gutter (pre-bended) pcs.
g.5 0.4mm thk. x 8' Pre-painted flushing (pre-bended) pcs.
g.6 3" dia. x 3m PVC pipe Le
g.7 3" dia. Basket strainer pcs.
g.8 3" dia. x 45 deg. bend PVC elbow pcs.
g.9 3" dia. x 90 deg. bend PVC elbow pcs.
H. Plumbing works
h.1 12mm dia. x 4m PPR Pipe Le
h.2 12mm dia. PPR plain elbow pcs.
h.3 12mm dia. PPR elbow female adaptor pcs.
h.4 12mm dia. PPR coupling pcs.
h.5 3" dia. x 3m PVC pipe Le
h.6 3" dia. x 90 deg. bend PVC elbow pcs.
h.7 Faucet pcs.
h.8 3" dia. PVC Clean-out w/ plug pcs.
h.9 Solvent cement 100cc pcs.
I. Painting works
i.1 Masonry putty B-7311 gal.
i.2 2" Mesh Tape pcs.
i.3 Permacoat Flat-Latex B-701 gal.
i.4 #9 Roller brush pcs.
i.5 #9 Paint tray pcs.
i.6 Masonry neutralizer #44 gal.
i.7 Acrytex primer #1705 gal.
i.8 Acrytex reducer #1750 gal.
i.9 Acrytex cast #1711 gal.
i.10 Acrytex Flat #1701 gal.
i.11 Assorted sand paper lot
i.12 Epoxy Primer gal.
i.13 Epoxy Reducer gal.
i.14 Waste rugs lot
i.15 Lacquer thinner gal.
J. Consumables and Misc. items
j.1 3/16" Blind rivets box
j.2 3/16" Metal drill bit pcs.
j.3 14" Cutting disk pcs.
j.4 6" Grinding stone pcs.
j.5 6013 Welding rod kgs.
j.6 #4 Concrete nails kgs.
j.7 1 1/2" Finishing nails kgs.
j.8 1" Teflon pcs.
j.9 4" Diamond cutter pcs.
j.10 Assorted C.W.N. kgs.
j.11 4" Cutting disk pcs.