Professional Documents
Culture Documents
com
To : SCL
Date : 2010/04/07
TFT LCD
CLAA156WA15A
ACCEPTED BY :
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
RECORD OF REVISIONS
Revision
Date Description
No.
Tentative 2010/02/08 Tentative version.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
Table of Content
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
OVERVIEW
CLAA156WA15A is 15.6" color (169) TFT-LCD (Thin Film Transistor Liquid Crystal Display) module
composed of LCD panel, LVDS driver ICs, control circuit and backlight. By applying 6 bit digital data, 1366RGB
(3) 768, 262K-color images are displayed on the 15.6" diagonal screen. General specifications are summarized in
the following table
ITEM SPECIFICATION
Display Area 344.232(H) x 193.536(V) (15.6-inch diagonal)
Number of Pixels 1366 x 3 (RGB) x 768
Pixel Pitch 0.252(H) x 0.252(V) (mm)
Color Pixel Arrangement RGB vertical stripe
Display Mode Normally white
Number of Colors 262,144(6bits) (LVDS)
Gamut 56%(min)/60% (Typ)
Optimum Viewing Angle 6 oclock
Response Time 8ms (Typ)
Surface Treatment Glare
Viewing Angle 40-40 /15-30 (min.)
220 cd/m2 (5point) (Typ)
Brightness
200 cd/m2 (5point) (Min)
5point80%
Uniformity
13point(70%)
Consumption of Power 6.0W (Max)
Module Size 360(W)x 218(H)x3.8(D) (mm) ( Max)
Module Weight 430 g (Max)
The LCD Products listed on this document are not suitable for use of aerospace equipment, submarine cable,
and nuclear reactor control system and life support systems. If customers intend to use these LCD products
for applications listed above or those not included in the "Standard" list as follows, please contact our sales
in advance.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
Note
*1) The relative temperature and humidity range are as below sketch, 90%RH Max. (Ta40)
*2) The maximum wet bulb temperature 39(Ta40) and without dewing.
*3) If product in environment which over the definition of the relative temperature and humidity out of
range too long, it will affect visual of LCD.
*4) If you operate LCD in normal temperature range, the center surface of panel should be under 50.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
3. ELECTRICAL CHARACTERISTICS
(A) TFT LCD
ITEM SYMBOL MIN TYP MAX UNIT NOTE
LCD Power Voltage VCC 3.0 3.3 3.6 V *1)
LCD Power Current ICC - (303) (363) mA *2)
Rush Current Irush - - 3 A *4)
Common Voltage VCM 1.125 1.25 1.375 V *3)
Differential Input
Logic Input VID 250 350 450 mV *3)
Voltage
Voltage
Threshold Voltage
(LVDS: VTH - - 100 mV
(HIGH) *3)
IN+,IN-)
Threshold Voltage When VCM = +1.2V
VTL -100 - - mV
(LOW)
Note
*1) Power Sequence
0.50 mst1 10 ms 500 mst4
0.01 mst2 50 ms 200 mst5
0.01 mst3 50 ms 200 mst6
VCC-dip state
(1)when 3.0VVCC2.7Vtd10 ms.
(2)when VCC2.7VVCC-dip condition should as the VCC-turn-off condition.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
Vin=3.3V
3.0V
2.7V
td
*2) Typical value is Mosaic (32*36 Checker board) Pattern900 line mode.
Circuit condition (Typ)VCC=3.3 VfV=60 Hz fH=55.56 kHzfCLK=48.89 MHz (one of LVDS dual port).
!
Max value is Black Pattern900 line mode.
Circuit condition (Max)VCC=3.3 VfV=60 Hz fH=55.56 kHzfCLK=48.89 MHz (one of LVDS dual port).
|VID| VTH
VTL
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
10ms T1 0ms T3
10ms T2 10ms T4
NoteThe duty of LED dimming signal should be more than 20% in T2 and T3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
*1) Maximum LED Driver Input Current at 7V Input Voltage/PWM Duty 100%.
*2) Measure methoda. LED current is measured by utilizing a current meter as show below.
b. System power PLED is measured at input voltage 12V.
PLED
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
DCLK
DATA
Invalid Data 1 2 3 1365 1366 Invalid Data
(R,G, B)
! tHB tHA
!DENA
tH
Vertical sequence tV
!
tVB tVA
!
!
! DENA
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
Note
*1) DENA (DATA ENABLE) usually is positive.
*2) During the whole blank period, DCLK should keep input.
*3) At 300kHz modulation rate (LVDS=85MHz).
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
RED(62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
RED(63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Green(0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green(1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
Green(2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0
Green
Green(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0
Green(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
Blue(0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Blue
Blue(62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0
Blue(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Note
1) Gray level:
Color(n)n is level order; higher n means brighter level.
2) DATA:
1: high0: low
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
6. BLOCK DIAGRAM
ASIC
(LVDS Receiver
Embedded)
Gate Drivers
TFT LCD
(1366x3x768)
LCD power
DC/DC converter
Input connector
Reference voltage
Source Drivers
LED power
Output
connector
LED Light Bar
PWM or EN
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
7. MECHANICAL SPECIFICATION
(1) Front side
The tolerance, not show in the figure, is 0.5 mm. [Unitmm]
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
8. OPTICAL CHARACTERISTICS
Ta=25VDD=3.3V
Uniformity(5P) L = 0 80 % *1) 3)
Tr = 0 3 6 ms *5)
Response Time
Tf = 0 5 10 ms *5)
Cross Talk CT = 0 1 % *6)
Horizontal 40/-40 *4)
View Angle CR10
Vertical 15/-30 *4)
X (0.293) 0.313 (0.333)
W
Y (0.309) 0.329 (0.349)
Color X (0.590) (0.620) (0.650)
R
Temperatur Y (0.310) (0.340) (0.370)
= 0 *3)
e X (0.300) (0.330) (0.360)
Coordinate G
Y (0.540) (0.570) (0.600)
X (0.120) (0.150) (0.180)
B
Y (0.030) (0.060) (0.090)
Gamut = 0 56% 60%
Gamma GL 2.0 2.2 2.4 *7)
Color coordinate and color gamut are measured by SRUL1R, response time is measured by TRD-100, and all the
other items are measured by BM-5A (TOPCON). All these items are measured under the dark room condition (no
ambient light).
Measurement Condition: IL= 20mA (each LED)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
!!!!!!!!!!! !
*3) Definition of Luminance and Luminance uniformity
Central luminance: The white luminance is measured at the center position "5" on the screen, see Fig.1 below.
5P Luminance (AVG): The white luminance is measured at measuring points 510111213, see Fig.1 below.
5P Uniformity: L = (Lmin / Lmax) 100%
W
(1/10)W
1 2 3 (1/10)H
10 11 H/4
H/4
4 5 6
H
12 H/4
12 13
7 8 9 H/4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
Upper (+)
LCD Panel
Lower (-)
White
90 % 90 %
Luminanc
10 % 10 %
tr tf
Black
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
LOG(
LOGGray Level
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
CPT CHUNGHWA PICTURES TUBES, LTD.,
(3) ESD
Surface discharge(Panel display Electrics capacity of
areaFramePWBPanel back side) Connector
Contact Air Contact
Capacity 150 pF 150 pF 200 pF
Resistance 330 330 0
Voltage 8kV 8kV/15kV 250 V
Interval 1 sec 1 sec 1 sec
Times(single point) 25 25 1
(4) MTBF without B/L: 200,000 Hrs (min) lifetimes.
(5) Judgment standard
The judgment of the above test should be made as follow:
PassNormal display image with no obvious non-uniformity and no line defect.
Partial transformation of the module parts should be ignored.
FailNo display image, obvious non-uniformity, or line defects.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com