Professional Documents
Culture Documents
Back Back
Front
Front
Back
Front
Back
Back
Front
Front
-1- 2 1
1 22 32
42 25 6
72 82 9 10
2
11 12 13
14 15 16
17 18 19
20 21
Front
22 x 8
1
10
2 x4 x4
32 x 4
Left / right side plate
fitted with feet.
5 6
5 7
6
x 12 x 12
x4
3
4
1 4
2 x3
82 x 1
Place the support Pole between two lateral plates, and then
mount the Shaft Sleeve and Thumb Screw from the outside.
After that, press 6 pieces of thumb screws at the rear
section downward to the set position.
9 x2
-2- 2 2
H
15
x9
6
x4 J
4
x2 Press the rear groove of the M/B onto
the Rear Support Pole before pressing
it onto the Front Support Pole.
E
1
x2
K
Press the rear groove of Fan/Hard Disk It will be released when it is pulled forward; The Support Pole and the Tray
Dual-purpose Tray into the Rear Support at this time, the Motherboard Tray can be can be mounted at the
Pole before pressing it into the lifted or dismantled. rear section.
Front Support Pole.
-3- 2 3
1
1
21 x 4 2
13 x 4 2
17 x 4 12 x 4
1
1
21 x 4 17 x 4
2
13 x 4 2 13 x 4
Supports 2.5" Hard Disk x 3 or 3.5" Hard Disk x 3 or 120 mm fans x 3 or cooling exhaust (120 mm x 360 mm).
16 x 6 20 x 3
11 x 4
Multimedia connection wire
USB 3.0 x 4, HD audio