You are on page 1of 18

Lab 3-6: Templates and Recording

Activity Objective
In this lab, Schedules define what type of video recording is used at different times of the day.

Task 1:Templates
Activity Procedure

Complete these steps:


1. Open Internet Explorer and connect to the VSOM at https://192.168.1.X/VSOM.

2. If you see a security warning, accept the warning and continue to the login page.

3. Click System Settings > Shared Resources > Templates.

4. Click the Add button to create a new template.

5. Enter the General settings as shown below in Figure 1

Figure 1. Template General Settings

HQ.Mn1

6. Click on the Streaming, Recording and Events tab.

7. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this template to
VSM Lab NON Entrance Cameras and set the recording rules for Nights and Weekends, Weekdays, and Lunch as shown in
Figure 2 below.
Figure 2. Streaming, Recording and Events Settings

VSM Lab NON Entrance


Cameras

8. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

9. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 3 below

Figure 3. Custom Quality Setting

10. Click Set, and then click Create.

11. Create a second template, called Bldg 30 Indoor Analog.

12. Click the Add button to create a new template.

13. Enter the General settings as shown below in Figure 4.


Figure 4. Template General Settings

HQ.Mn1

14. Click on the Streaming, Recording and Events tab.

15. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this template to
VSM Lab NON Entrance Cameras and set the recording rules for Nights and Weekends, Weekdays, and Lunch as shown in
Figure 5 below

Figure 5. Streaming, Recording and Events Settings

VSM Lab NON Entrance


Cameras

16. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

17. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 6 below.
Figure 6. Custom Quality Settings

18. Click Set, and then click Create.

19. Create a third template, called Bldg 30 Entrance

20. Click the Add button to create a new template.

21. Enter the General settings as shown below in Figure 7.

Figure 7. Template General Settings

HQ.Mn1

22. Click on the Streaming, Recording and Events tab.

23. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this template
to VSM LAB - Entrance Cameras and set the recording rules for All Day as shown in Figure 8 below.
Figure 8. Streaming, Recording and Events Settings

VSM LAB - Entrance


Cameras

24. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

25. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 9 below.

Figure 9. Custom Quality Settings

26. Click Set, and then click Create.

27. Create a fourth template, called Bldg 30 Outdoor.

28. Click the Add button to create a new template.

29. Enter the General settings as shown below in Figure 10.


Figure 10. Template General Settings

HQ.Mn1

30. Click on the Streaming, Recording and Events tab.

31. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this template to
VSM Lab NON Entrance Cameras and set the recording rules for Weekdays, Nights and Weekends, and Lunch as shown in
Figure 11 below

Figure 11. Streaming, Recording and Events Settings

VSM Lab NON Entrance


Cameras

32. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

33. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 12 below.

Figure 12. Custom Quality Settings


34. Click Set, and then click Create.

35. Create a fifth template, called Bldg 28 Office Area.

36. Click the Add button to create a new template.

37. Enter the General settings as shown below in Figure 13.

Figure 13. Template General Settings

HQ.Mn2

38. Click on the Streaming, Recording and Events tab.

39. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this template to
VSM Lab NON Entrance Cameras and set the recording rules for Weekdays, Nights and Weekends, and Lunch as shown in
Figure 14

Figure 14. Streaming, Recording and Events Settings

VSM Lab NON Entrance


Cameras

40. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

41. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 15 below.
Figure 15. Custom Quality Settings

42. Click Set, and then click Create.

43. Create a sixth template, called Bldg 28 Demo Area.

44. Click the Add button to create a new template.

45. Enter the General settings as shown below in Figure 16

Figure 16. Template General Settings

HQ.Mn2

46. Click on the Streaming, Recording and Events tab.

47. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this template
to VSM Lab NON Entrance Cameras and set the recording rules for Weekdays, Nights and Weekends, and Lunch as
shown in Figure 17 below.
Figure 17. Streaming, Recording and Events Settings

VSM Lab NON Entrance


Cameras

48. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

49. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 18 below.

Figure 18. Custom Quality Settings

50. Click Set, and then click Create.

51. Create a seventh template, called Bldg 28 Test Area.

52. Click the Add button to create a new template.

53. Enter the General settings as shown below in Figure 19.


Figure 19. Template General Settings

HQ.Mn2

54. Click on the Streaming, Recording and Events tab.

55. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this template
to VSM Lab NON Entrance Camerasand set the recording rules for Weekdays, Nights and Weekends, and Lunch as
shown in Figure 20 below.

Figure 20. Streaming, Recording and Events Settings

VSM Lab NON Entrance


Cameras

56. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

57. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 21 below.
Figure 21. Custom Quality Settings

58. Click Set, and then click Create.

59. Create an eighth template, called Bldg 28 Outdoor.

60. Click the Add button to create a new template.

61. Enter the General settings as shown below in Figure 22

Figure 22. Template General Settings

HQ.Mn2

62. Click on the Streaming, Recording and Events tab.

63. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this template
to VSM Lab NON Entrance Cameras and set the recording rules for Weekdays, Nights and Weekends, and Lunch as
shown in Figure 23 below.
Figure 23. Streaming, Recording and Events Settings

VSM Lab NON Entrance


Cameras

64. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

65. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 24 below.

Figure 24. Custom Quality Settings

66. Click Set, and then click Create.

67. Create a ninth template, called Bldg 28 Entrance.

68. Click the Add button to create a new template.

69. Enter the General settings as shown below in Figure 25.


Figure 25. Template General Settings

HQ.Mn2

70. Click on the Streaming, Recording and Events tab.

71. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this template to
VSM LAB - Entrance Cameras and set the recording rules for All Day as shown in Figure 26 below.

Figure 26. Streaming, Recording and Events Settings

VSM LAB - Entrance


Cameras

72. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

73. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 27 below.

Figure 27. Custom Quality Settings

74. Click Set, and then click Create.

75. Create a tenth template, called Bldg 32 Outdoor.


76. Click the Add button to create a new template.

77. Enter the General settings as shown below in Figure 28

Figure 28. Template General Settings

HQ.Mn2

78. Click on the Streaming, Recording and Events tab.

79. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this template
to VSM Lab NON Entrance Cameras and set the recording rules for Weekdays, Nights and Weekends, and Lunch as
shown in Figure 29 below.

Figure 29 Streaming, Recording and Events Settings

VSM Lab NON Entrance


Cameras

80. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

81. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 30 below
Figure 30. Custom Quality Settings

82. Click Set, and then click Create.

83. Create an eleventh template, called Bldg 32 HealthPresence.

84. Click the Add button to create a new template.

85. Enter the General settings as shown below in Figure 31

Figure 31 Template General Settings

HQ.Mn2

86. Click on the Streaming, Recording and Events tab.

87. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this template
to VSM Lab NON Entrance Cameras and set the recording rules for Weekdays, Nights and Weekends, and Lunch as
shown in Figure 32 below
Figure 32. Streaming, Recording and Events Settings

VSM Lab NON Entrance


Cameras
88. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

89. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 33 below.

Figure 33. Custom Quality Settings

90. Click Set, and then click Create.

91. Create a twelfth template, called Bldg 32 Hallway.

92. Click the Add button to create a new template.

93. Enter the General settings as shown below in Figure 34

Figure 34. Template General Settings

HQ.Mn2

94. Click on the Streaming, Recording and Events tab.

95. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this template
to VSM Lab NON Entrance Camerasand set the recording rules for Weekdays, Nights and Weekends, and Lunch as
shown in Figure 35 below.
Figure 35. Streaming, Recording and Events Settings

VSM Lab NON Entrance


Cameras

96. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

97. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 36 below

Figure 36. Custom Quality Settings

98. Click Set, and then click Create.

99. Create a thirteenth template, called Bldg 32 Entrance.

100. Click the Add button to create a new template.

101. Enter the General settings as shown below in Figure 37

Figure 37. Template General Settings

HQ.Mn2

102. Click on the Streaming, Recording and Events tab


103. The default schedule will show Basic Recording: 24 x 7. Using the drop-down arrow, change the schedule for this
template to VSM LAB - Entrance Cameras and set the recording rules for All Day as shown in Figure 38 below

Figure 38. Streaming, Recording and Events Settings

VSM LAB - Entrance


Cameras

104. Change both the Retain continuous recordings and Retain event recordings settings to 3 days.

105. Under Video Stream A, click Custom and enter the video stream settings for this template as shown in Figure 39 below.

Figure 39. Custom Quality Settings

106. Click Set, and then click Create.

You might also like