You are on page 1of 94

ENGLISH

MONITOR WITH DVD RECEIVER


MONITOR CON RECEPTOR DE DVD

ESPAOL
MONITEUR AVEC RCEPTEUR DVD

KW-ADV64BT/KW-AV68BT/
KW-AV60BT/KW-AV60

FRANAIS
For canceling the display demonstration, see page 7. For customer Use:
Para cancelar la demonstracin en pantalla, consulte la pgina 7. Enter below the Model No. and
Pour annuler la dmonstration des affichages, rfrez-vous la page 7. Serial No. which are located on
the top or bottom of the cabinet.
For installation and connections, refer to the separate manual. Retain this information for future
Para la instalacin y las conexiones, refirase al manual separado. reference.
Pour linstallation et les raccordements, se rfrer au manuel spar.
Model No.
Serial No.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL DINSTRUCTIONS

LVT2293-001A
[J/JW]

Downloaded from www.Manualslib.com manuals search engine


Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
ENGLISH

IMPORTANT FOR LASER PRODUCTS


1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the
top cover. There are no user
serviceable parts inside the
unit; leave all servicing to
qualified service personnel.
3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.
(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not view directly with
optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

INFORMATION (For U.S.A.)


This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not approved by JVC could void the users authority to operate the equipment.

WARNINGS: (To prevent accidents and damage)


DO NOT install any unit or wire any cable in a location DO NOT operate the unit while driving.
where; If you need to operate the unit while driving, be sure
it may obstruct the steering wheel and gearshift to look around carefully.
lever operations. The driver must not watch the monitor while driving.
it may obstruct the operation of safety devices The driver must not put on the headphones while
such as air bags. driving.
it may obstruct visibility.

[European Union only]

2
Downloaded from www.Manualslib.com manuals search engine
CAUTION Temperature inside the car...
Use of controls or adjustments or performance of If you have parked the car for a long time in hot or cold

ENGLISH
procedures other than those specified herein may result in weather, wait until the temperature in the car becomes
hazardous radiation exposure. In compliance with Federal normal before operating the unit.
Regulations, following are reproductions of labels on, or
inside the product relating to laser product safety. How to reset your unit
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES
21CFR SUBCHAPTER J IN EFFECT AT DATE OF
MANUFACTURE. Your preset adjustments will also be erased (except
the registered Bluetooth devices).
Location : Bottom
How to forcibly eject a disc
Cautions on the monitor:
The monitor built in this unit has been produced with Press SRC/ and 0 at the same time.
high precision, but it may have some ineffective dots.
This is inevitable and is not considered defective. +
Do not expose the monitor to direct sunlight.
Do not operate the touch panel using a ball-point
pen or similar tool with the sharp tip.
Touch the buttons on the touch panel with your
finger directly (if you are wearing a glove, take it off).
When the temperature is very cold or very hot...
Chemical changes occur inside, causing malfunction.
Pictures may not appear clearly or may move
slowly. Pictures may not be synchronized with Be careful not to drop the disc when it ejects.
the sound or picture quality may decline in such If this does not work, reset your unit. ( above)
environments.
For safety...
Do not raise the volume level too much, as this will
make driving dangerous by blocking outside sounds,
and may cause hearing loss.
Stop the car before performing any complicated
operations.

How to read this manual:


Illustrations of KW-ADV64BT/KW-AV60BT are mainly used for explanation.
This manual mainly explains operations using the buttons on the monitor panel and touch panel. For
operations using the remote controller (RM-RK252: supplied only for KW-ADV64BT/KW-AV68BT),  page 62.
< > indicates the variable screens/menus/operations/settings that appear on the touch panel.
[ ] indicates the buttons on the touch panel.
Indication language: English indications are used for the purpose of explanation. You can select the
indication language from the <Settings> menu. ( page 48)

3
Downloaded from www.Manualslib.com manuals search engine
ENGLISH Contents
How to reset your unit ........................................... 3 Listening to the SiriusXM Radio
How to forcibly eject a disc .................................... 3 (only for KW-ADV64BT/KW-AV60BT/
INTRODUCTIONS KW-AV60) ......................................35
Activating subscription........................................ 35
Detaching/attaching the monitor panel...5 Tuning in to a channel ......................................... 35
Component names and functions ............6 Setting the reception restrictions ........................ 37
Initial settings .......................................7 Sound adjustment ................................39
Setting the clock ....................................8 Using the sound equalization .............................. 39
Common operations ...............................9 Adjusting the crossover frequency....................... 40
Turning on the power ........................................... 9 Changing display design .......................41
Turning off the power ............................................ 9 Setting for video playback ....................43
Adjusting the volume ........................................... 9 Adjusting the picture........................................... 43
Turning off the screen ........................................... 9 Changing the aspect ratio ................................... 44
Turning on/off the AV source .............................. 10 Zooming the picture ............................................ 44
Touch screen operation........................................ 10 Using a rear view camera ......................45
Switching screens ................................11 Setting menu items ..............................46
AV SOURCE OPERATIONS Memorizing/recalling the settings ..................... 49
Selecting the playback source ...............12 Updating the system ........................................... 50
Adjusting the touch position .............................. 50
Listening to the radio ...........................13
Disc operations.....................................17 BLUETOOTH OPERATIONS
Playing a disc....................................................... 17 Information for using Bluetooth
Playable disc types .............................................. 18 devices..........................................51
Playback operations ............................................ 19 Bluetooth operations for KW-ADV64BT/
Settings for disc playback .................................... 23 KW-AV68BT/KW-AV60BT .................51
USB operations.....................................24 Connecting Bluetooth devices ............................. 52
Playing a USB device ........................................... 24 Using the Bluetooth mobile phone...................... 54
Listening to the iPod/iPhone device ......26 Using the Bluetooth audio player ........................ 59
Preparation ......................................................... 26 Bluetooth device settings .................................... 60
Setting iPod control mode ................................... 27 Bluetooth operations for KW-AV60 ........61
Selecting preference settings for iPod/iPhone Using the Bluetooth mobile phone ..................... 61
playback .............................................................. 27 Using the Bluetooth audio player ....................... 61
iPod/iPhone playback operations for
<Head> mode.................................................... 28 REFERENCE
iPod/iPhone playback operations for Using the remote controller ..................62
<iPod Out> mode .............................................. 29 Operations using the remote controller
Using an App of iPod touch/iPhone ..................... 30 (RM-RK252) ........................................................ 62
PANDORA internet radio operations (only for Maintenance .......................................65
KW-ADV64BT/KW-AV60BT/KW-AV60)................. 32 More about this unit .............................66
Using other external components..........34 Troubleshooting ...................................69
Front AUX ............................................................ 34 Specifications.......................................74
AV-IN ................................................................... 34

4
Downloaded from www.Manualslib.com manuals search engine
INTRODUCTIONS

ENGLISH
Detaching/attaching the monitor panel
Cautions
Hold the monitor panel securely so as not to drop it accidentally.
Fit the monitor panel onto the attaching plate until it is firmly locked.

Detaching Attaching
Turn off the power before detaching the monitor panel.
( page 9)
1

Soft case (supplied)

5
Downloaded from www.Manualslib.com manuals search engine
ENGLISH
Component names and functions

Screen (touch panel) Monitor panel

1 Loading slot 5 VOLUME/ATT knob. ( page 9)


2 0 (Eject) button Attenuates the sound. (Press)
Ejects the disc. Adjusts the audio volume. (Turn)
3 MENU/DISP OFF button 6 Remote sensor
Displays <AV Menu> screen. (Press) 7 Reset button
( page 11) Resets the unit. ( page 3)
Turns off/on the screen. (Hold) ( page 9) 8 AUX input jack
4 SRC / button 9 (Detach) button
Turns off the power. (Hold) ( page 9) Detaches the monitor panel. ( page 5)
Turns on the power. ( page 9)
Selects the AV source. (Press) ( page 12)

Caution on volume setting:


Digital devices (CD/USB/iPod) produce very little
noise compared with other sources. Lower the
volume before playing these digital sources to
avoid damaging the speakers by sudden increase You can change the color of the buttons on the
of the output level. monitor panel. ( page 41)

6
Downloaded from www.Manualslib.com manuals search engine
Initial settings

ENGLISH
When you power on the unit for the first time or reset
Language Select the text language used
the unit, the initial setting screen appears.
for on-screen information.
You can also change the settings on the <Settings>
(page 48)
screen. ( page 46)
AV Input Select an external component
to play. (page 47)
1 For KW-ADV64BT/KW-AV68BT/KW-AV60BT
Camera Input Select <On> when
connecting the rear view
camera. (page 48)
Display Select the background
Design and the colors of the text,
touch panel buttons and
the monitor panel buttons.
(page 41)
Demonstration Activate or deactivate the
For KW-AV60 display demonstration.
(page 47)

2 Finish the procedure.

<AV Menu> screen is displayed.


<AV Off> is selected initially. Select the
playback source. (page 12)

7
Downloaded from www.Manualslib.com manuals search engine
Setting the clock
1 Display <AV Menu> screen. 4 Set the clock time.
ENGLISH

On the source control screen:


To synchronize the clock time with
FM RBDS

2 Display <Settings> screen. To set the clock manually

1 Select the time display format


2 Adjust the hour
3 Adjust the minute
5 Finish the procedure.

8
Downloaded from www.Manualslib.com manuals search engine
Common operations

ENGLISH
Turning on the power Turning off the screen

(Hold)

Turning off the power The screen is turned off.


You can also turn off the screen on <AV Menu>
screen.

(Hold)

Adjusting the volume


To adjust the volume (00 to 50)
Decrease Increase

To turn on the screen


On the source control screen, you can also adjust the
volume by moving your finger on the touch panel as
illustrated.

Decrease Increase or
Touch the screen to display <AV Menu> screen.

To attenuate the sound

The ATT indicator lights up.

To cancel the attenuation, press the VOLUME/ATT


knob.

9
Downloaded from www.Manualslib.com manuals search engine
Turning on/off the AV source Touch screen operation
You can activate the AV function by selecting source on A Displays the video control menu while
ENGLISH
<AV Menu> screen. playing a video.

B Displays the source control


screen while playing a video.
Goes to the previous Goes to the next
To turn off the AV source chapter/track.* chapter/track.*
A Video control menu

AV source is turned off.

B Source control screen for video playback

The operation buttons disappear by touching the


screen or when no operation is done for about 10
seconds.
* Not available for video from an external component.
Dragging your finger to left or right functions in the
same way as touching.

10
Downloaded from www.Manualslib.com manuals search engine
Switching screens

ENGLISH
Source control screen
Common operating buttons
[ ] *1 Displays the screen of App from connected
iPod touch/iPhone. ( page 30)
[ ]*2*3 Displays the phone control screen. (Press)
Switches to the last connected mobile
phone. (Hold) ( page 53)
[ ] Displays the sound adjustment screen.
( page 39)
[TP] Activates/deactivates TA standby reception
Pressing MENU on the monitor panel also mode. ( page 16)
displays <AV Menu>.

<AV Menu> screen <Settings> screen


Displays source control screen/settings screen and Changes the detailed settings. ( page 46)
changes picture source.
Displays the phone Changes the page
 page 12 control screen *2

*1 Appears when <Input> setting in <Navigation


Input> screen is set to <iPhone>. ( page 30)
2
* Only for KW-ADV64BT/KW-AV68BT/KW-AV60BT.
*3 The icon varies depending on the connection status of
Select an item to display on the screen.
the Bluetooth device ( page 51).
[AV] Displays the source control screen.
(above)
[Camera] Displays the picture from the rear
view camera. (page 45)
1
[Apps]* Displays the screen of App from
connected iPod touch/iPhone.
(page 30)
[Off] Turns off the screen. (page 9)
Press [ ] to return to the previous screen.
Press [ ] to display the current source control
screen.

11
Downloaded from www.Manualslib.com manuals search engine
ENGLISH AV SOURCE OPERATIONS
Selecting the playback source
KW-ADV64BT/KW-AV60BT KW-AV60

KW-AV68BT

Pressing SRC on the monitor panel repeatedly also selects the playback source.

TUNER ( page 13) Switches to the radio broadcast.


Satellite*1 ( page 35) Switches to the SiriusXM radio broadcast.
DISC ( page 17) Plays a disc.
USB ( page 24) Plays files on a USB device.
iPod ( page 26) Plays an iPod/iPhone.
Pandora*1 ( page 32) Switches to the PANDORA internet radio broadcast.
Bluetooth*2 (KW-ADV64BT/KW- KW-ADV64BT/KW-AV68BT/KW-AV60BT: Plays a Bluetooth audio
AV68BT/KW-AV60BT:  page 59/KW- player.
AV60:  page 61) KW-AV60: Operates a Bluetooth device.
AV-IN*3 ( page 34) Switches to an external component connected to LINE IN/VIDEO IN jacks
on the rear panel.
Apps*4 ( page 30) Switches to the screen of App from the connected iPod touch/
iPhone.
Front AUX ( page 34) Switches to an external component connected to AUX input terminal on
the monitor panel.
AV Off ( page 10) Turns off the AV source.
*1 Only for KW-ADV64BT/KW-AV60BT/KW-AV60.
*2 For KW-AV60: Appears only when <AV Input> is set to <BT>. ( page 47)
*3 Appears only when <AV Input> is set to <AV-IN>. ( page 47)
*4 Appears only when <AV Input> is set to <iPod>. ( page 47)

12
Downloaded from www.Manualslib.com manuals search engine
Listening to the radio

ENGLISH
Preparation: Select the appropriate tuner channel interval for <Area Setting>. ( page 15)

DX/LO indicator
ST/MO indicator Standby reception indicator The station frequency currently tuned
Preset no. in/PS (station name) for FM RBDS
when PS signal is coming in
Band
PTY code for FM RBDS

Preset list
 page 16

The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.
[P1] [P6] Tunes in the preset station. (Press) [BAND] Selects the band.
Presets the currently tuned
station. (Hold)
[4] [] Searches for a station.
[TP]* Activates/deactivates TA standby
Auto search (Press)
reception mode. ( page 16)
Manual search (Hold)
[3] Displays/hides the information of the
[ ][ ] Selects a preset station.
current station ( below).
[Mode] Displays tuner setting screen.
[PTY ]* Enters FM RBDS program search
( pages 14 15)
mode. ( page 16)
[AV MENU] Displays <AV Menu> screen.

* Appears only when FM is selected as the source.

Displaying the information of the current station

Hides the text Text information (only for


information Radio Text Plus)
Scrolls the text information

13
Downloaded from www.Manualslib.com manuals search engine
When an FM stereo broadcast is hard to When the FM reception is interfered...
ENGLISH receive... 1
Activate monaural mode for better reception.
1
2

Auto Increases the tuner selectivity to reduce


interference noises between adjacent
On Activate monaural mode to improve FM stations. (Stereo effect may be lost.)
reception, but the stereo effect will be Wide Subject to the interference from
lost. The MO indicator lights up. adjacent stations, but sound quality
Off Restore the stereo effect. will not be degraded and the stereo
effect will remain.
To tune in FM stations only with strong
signalsLO/DX (Local/Distance-extreme)
1

Local Select this to tune in only to stations


with sufficient signal strength. The LO
indicator lights up.
DX Deactivate the function. The DX
indicator lights up.

14
Downloaded from www.Manualslib.com manuals search engine
Changing the tuner channel Storing stations in memory
interval You can preset six stations for each band.

ENGLISH
Tuner channel interval changes depending on the area Automatic presettingSSM (Strong-
you use this unit. station Sequential Memory) (For FM only)
1 1

2 2

(Hold)

Local stations with the strongest signals are searched


US Select this when using in North/
and stored automatically.
Central/South America. FM/AM
intervals are set to 200 kHz/10 kHz.
Europe Select this when using in any other
Manual presetting
areas. FM/AM intervals are set to 50 1 Tune in to a station you want to preset.
kHz/9 kHz. ( page 13)
SA Select this when using in South 2 Select a preset number.
American countries where FM interval
is 50 kHz. AM interval is set to 10 kHz.

Initial setting is <US> for KW-ADV64BT/KW-


AV60BT/KW-AV60, and <SA> for KW-AV68BT. (Hold)

The station selected in step 1 is stored.

15
Downloaded from www.Manualslib.com manuals search engine
Selecting a preset station Activating/deactivating TA Standby
ENGLISH Reception
TP indicator

Also changes preset stations

The following features are available only for FM TP indicator TA Standby Reception
RBDS stations. Lights up The unit will temporarily switch
to Traffic Announcement (TA) if
Searching for FM RBDS program available.
PTY Search Flashes Not yet activated. Tune in to another
You can search for your favorite programs being station providing the RBDS signals.
broadcast by selecting the PTY code for your favorite Goes off Deactivated.
programs.
1 The volume adjustment for Traffic Announcement
is automatically memorized. The next time the unit
switches to Traffic Announcement, the volume is set
to the previous level.

2 Select a PTY code.

(Hold)

Changes the page

PTY Search starts.


If there is a station broadcasting a program of the
same PTY code as you have selected, that station
is tuned in.

16
Downloaded from www.Manualslib.com manuals search engine
Disc operations

ENGLISH
Playing a disc
If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject
the disc.
Inserting a disc To eject a disc

Label side

You can eject a disc when playing another AV source.


If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust.
If the disc cannot be ejected,  page 3.
The source changes to DISC and playback starts.
When removing a disc, pull it horizontally.
The DISC IN ( ) indicator lights up while a
disc is inserted. To prohibit disc ejection
Press SRC/ and 0 at the same time.
If appears on the screen, the unit cannot
accept the operation you have tried to do. +
In some cases, without showing ,
operations will not be accepted.
When playing back a multi-channel encoded
disc, the multi-channel signals are downmixed
to stereo.

To cancel the prohibition, repeat the same procedure


to select <Eject OK?>.

17
Downloaded from www.Manualslib.com manuals search engine
Playable disc types
Disc type Recording format, file type, etc. Playable
ENGLISH

DVD DVD-Video *1
DTS sound cannot be Region Code:
reproduced or emitted from For KW-ADV64BT/
this unit. KW-AV60BT/KW-AV60: 1
For KW-AV68BT: 4
DVD-Audio/DVD-ROM
DVD Recordable/Rewritable DVD-Video
(DVD-R/-RW *2, +R/+RW *3) DVD-VR *5
DVD Video: UDF bridge
DVD-VR DivX*4/MPEG1/MPEG2
DivX*4/MPEG1/MPEG2/JPEG/ JPEG
MP3/WMA/WAV: ISO 9660 level
MP3/WMA/WAV
1, level 2, Romeo, Joliet
MPEG4/AAC/DVD+VR/DVD-RAM
Dual Disc DVD side
Non-DVD side
CD/VCD Audio CD/CD Text (CD-DA)
VCD (Video CD)
DTS-CD/SVCD (Super Video CD)/CD-ROM/CD-I(CD-I Ready)
CD Recordable/Rewritable CD-DA
(CD-R/-RW) VCD (Video CD)
ISO 9660 level 1, level 2,
Romeo, Joliet DivX*4/MPEG1/MPEG2
JPEG
MP3/WMA/WAV
MPEG4/AAC
*1 If you insert a DVD Video disc of an incorrect Region Code, Region Code Error appears on the screen.
*2 DVD-R recorded in multi-border format is also playable (except for dual layer discs). DVD-RW dual layer discs are not
playable.
3
* It is possible to play back finalized +R/+RW (Video format only) discs. DVD is selected as its disc type when a
+R/+RW disc is loaded. +RW double layer discs are not playable.
4
* Playable only for KW-ADV64BT/KW-AV60BT/KW-AV60.
*5 This unit cannot play back contents protected with CPRM (Content Protection for Recordable Media).
Caution for DualDisc playback
The Non-DVD side of a DualDisc does not comply with the Compact Disc Digital Audio standard. Therefore, the use
of Non-DVD side of a DualDisc on this product may not be recommended.

18
Downloaded from www.Manualslib.com manuals search engine
Playback operations
When the operation buttons are not displayed on the screen, touch the area shown on

ENGLISH
the illustration.

For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG
Audio format Playback mode Playing time
Media type (page 22) DISC IN indicator

Video format/
Playback status
video playback
(3: play / 8: pause / 7: stop)
modeVIDEO/
VR-PRG (program)/ DVD Video: Title no./
VR-PLAY (playlist)/ Chapter no.
DivX/MPEG/PBC DVD-VR: Program no. (or
Playlist no.)/Chapter no.*1
DivX/MPEG1/MPEG2:
Folder no./Track no.
JPEG: Folder no./File no.
VCD: Track no.

[7]*2 Stops playback. [4] []*5 Selects chapter/track.


[ ]*3 Displays folder/track list. ( (Press)
page 20) Reverse/forward search.*6
[ ][ ]*4 Selects playback mode. ( (Hold)
page 22) 5 7
[ ] [ ]* * Selects title (DVD)/program or
[6] Starts/pauses playback. playlist (DVD-VR)/folder(DivX/
MPEG1/MPEG2/JPEG). *1
[Mode]*7 Changes the settings for disc
playback. ( page 23)
[AV MENU] Displays <AV Menu> screen.

*1 To display the Original Program/Playlist screen, page21.


*2 Appears only for DVD/DVD-VR/VCD.
*3 Does not appear for DVD/DVD-VR/VCD.
*4 Does not appear for DVD/DVD-VR/JPEG.
*5 The icon displayed between the buttons varies depending on the type of disc or file.
*6 Search speed varies depending on the type of disc or file.
*7 Does not appear for VCD.

19
Downloaded from www.Manualslib.com manuals search engine
For CD/MP3/WMA/WAV
Playing time
ENGLISH
Playback mode ( page 22) Playback status
Audio format DISC IN indicator (3: play / 8: pause )

Media type
MP3/WMA/WAV: Folder
no./Track no.
CD: Track no.

While playing, the jacket picture is Track/file information


shown if the file has the tag data Touching an information bar scrolls the text if not all of the
including the jacket picture. text is shown.

[ ]*1 Displays folder/track list. [4] [] Selects track. (Press)


(below) Reverse/forward search.*2
[ ][ ] Selects playback mode. (Hold)
(page22) [ ] [ ]*1 Selects folder.
[6] Starts/pauses playback. [Mode]*1 Changes the settings for disc
playback. ( page 23)
[AV MENU] Displays <AV Menu> screen.

*1 Does not appear for CD.


*2 Search speed varies depending on the type of disc or file.

Selecting folder/track on the list


Changes the page
Plays tracks/files in the folder
Playing Recordable/Rewritable discs
This unit can recognize a total of 5 000 files and
250 folders (a maximum of 999 files per folder).
Use only finalized discs.
This unit can play back multi-session discs;
however, unclosed sessions will be skipped
while playing.
Some discs or files may not be played back due
Returns to the root folder to their characteristics or recording conditions.
Returns to the upper layer

20
Downloaded from www.Manualslib.com manuals search engine
Video menu operations [ ] Selects view angle.
You can display the video menu screen while watching [Menu] Displays the disc menu (DVD)/playlist

ENGLISH
the playback pictures on the screen. (DVD-VR).
Available items on the screen differ depending on the [Top Menu] Displays the disc menu (DVD)/original
types of the loaded disc and playback files. program (DVD-VR).
The operation buttons disappear by touching the Displays the menu/playlist/original
[ ]
screen or when no operation is done for about 10 program/scene selecting screen.
seconds. ( below)
[ ] Switches to the direct menu selection
mode. Touch the target item to select.
To exit from the menu selecting
screen, press [ ].
Touching any position other than operation buttons
displays the source control screen.

Using menu/playlist/original program/


scene selecting screen

The screen for MPEG1/MPEG2 differs from the above.


[5] []
Selects an item.
[2] [3]
[Enter] Confirms the selection.
[Return] Returns to the menu screen of the
previous layer.
[ ] Displays the menu screen of the top
layer when several menu screens exist
[Zoom] Displays the picture size selecting on the disc.
screen. ( page 44) For DivX only
[Aspect] Selects aspect ratio. ( page 44) [2] [3] Skips back or forward by about 5
[Adjust] Displays picture adjustment screen. minutes.
( page 43) [Return] Returns to the previous screen.
[ ] Selects the audio type. [ ] Exits from the scene selecting screen.
For DVD-VR: Selects the audio
channel (ST: stereo, L: left, R: right).
[ ] Selects the subtitle type.

21
Downloaded from www.Manualslib.com manuals search engine
Only for VCD To deactivate the PBC function, press [7] then the
ENGLISH 1 direct selecting buttons to select a track number.

Selecting playback mode


For DVD/DVD-VR

2 Selects Repeat playback mode

For VCD (without PBC)/CD/DivX/MPEG1/MPEG2/MP3/


WMA/WAV

Selects Random Selects Repeat


playback mode* playback mode*
Direct selecting buttons ( below)

[Zoom] Displays the picture size selecting * You cannot activate the repeat mode and the random
screen. ( page 44) mode at the same time.
[Aspect] Selects aspect ratio. ( page 44) Each time you press the button, the playback mode
[Adjust] Displays picture adjustment screen. changes. (The corresponding indicator lights up.)
( page 43) Available items differ depending on the types of
[ ] Selects the audio channel (ST: stereo, loaded disc and playback file.
L: left, R: right). Indicator Playback mode
[Return] Displays the previous screen or the CHAPTER Repeats current chapter.
menu. TITLE Repeats current title.
[Menu] Displays the disc menu. Repeats current program (not
[ ] Displays/hides the direct selecting PROGRAM available for Playlist playback).
buttons. ( below)
SONGS Repeats current track.
To select a track directly FOLDER Repeats all tracks of the current
folder.
FOLDER Randomly plays all tracks of
current folder, then tracks of next
folders.
ALL Randomly plays all tracks.

To cancel, press the button repeatedly until the


To switch between chapter/track entry and title/ indicator disappears.
folder entry, press [Direct/CLR].
When you enter a wrong number, press [Direct/
CLR] to delete the last entry.

22
Downloaded from www.Manualslib.com manuals search engine
Settings for disc playback

ENGLISH
Disc Setup items Selectable setting/item Initial: Underlined
Menu Language Select the initial disc menu language; Initial English ( page 67).
Audio Language Select the initial audio language; Initial English ( page 67).
Subtitle Select the initial subtitle language or erase the subtitle (Off).
Initial for KW-ADV64BT/KW-AV60BT/KW-AV60: Off, for KW-AV68BT: English (
page 67)
For DVD/DVD-VR/DivX

Down Mix When playing back a multi-channel disc, this setting affects the signals reproduced
through the FRONT OUT/REAR OUT jacks.
z Dolby Surround : Select this to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby Surround.
z Stereo : Normally select this.
D. (Dynamic) You can change the dynamic range while playing Dolby Digital software.
Range Compres. z Off : Select this to enjoy a powerful sound at a low volume
(Compression) level with its full dynamic range.
z On : Select this to reduce the dynamic range a little.
z Dialog : Select this to reproduce the movie dialog more clearly.
Monitor Type Select the monitor type to watch a wide screen picture on the external monitor.
For discs except

z 16:9 z 4:3 LB (Letterbox) z 4:3 PS (PanScan)


VCD/CD

File Type Select the playback file type when a disc contains different types of files.
For discs containing audio/

z Audio : Plays back audio files.


video/picture files

z Still Picture : Plays back JPEG files.


z Video : Plays back DivX/MPEG1/MPEG2 files.
z Audio&Video : Plays back audio files and DivX/MPEG1/MPEG2 files.
For playable file types,  page 18.
If the disc contains no files of the selected type, the existing files are played in the
following priority: audio, video, then still picture.

23
Downloaded from www.Manualslib.com manuals search engine
ENGLISH
USB operations
Playing a USB device
This unit can play JPEG/MPEG1/MPEG2 */MP3/WMA/ Cautions:
WAV files stored in a USB mass storage class device. This unit may not play back files in a USB device
This unit can recognize a total of 5 000 files and 250 properly when using a USB extension cord.
folders (a maximum of 999 files per folder). USB devices equipped with special functions such as
Make sure all important data has been backed up to data security functions cannot be used with the unit.
avoid losing the data. Do not use a USB device with 2 or more partitions.
Depending on the shape of the USB devices and
* Except for MPEG2 files recorded by JVC Everio connection ports, some USB devices may not be
camcorder (extension code <.mod>). attached properly or the connection might be loose.
This unit cannot recognize a USB device whose rating
Connecting a USB device is other than 5 V and exceeds 1 A.
You can connect a USB mass storage class device such as This unit may not recognize a memory card inserted
a USB memory, Digital Audio Player etc. to the unit. into the USB card reader.
You cannot connect a computer or portable HDD to Connect only one USB device to the unit at a time. Do
the USB cable from the rear of the unit. not use a USB hub.
When connecting with a USB cable, use the USB 2.0
cable.
The maximum number of characters for (when the
characters are 1 byte):
Folder names: 50 characters
File names: 50 characters
Avoid using the USB device if it might effect driving
safety.
Do not pull out and connect the USB device
repeatedly while Now Reading is shown on the
screen.
Electrostatic shock at connecting a USB device may
USB cable from the
rear of the unit
cause abnormal playback of the device. In this case,
disconnect the USB device then reset this unit and
the USB device.
The source changes to USB and playback starts. Operation and power supply may not work as
All tracks in the USB device will be played repeatedly intended for some USB devices.
until you change the source. Do not leave a USB device in the car, or expose
to direct sunlight or high temperature to avoid
deformation or damage to the device.

24
Downloaded from www.Manualslib.com manuals search engine
When the operation buttons are not displayed on the screen, touch the area shown on
the illustration.

ENGLISH
To change settings for video playback,  page 43.

Playback mode ( below)


Audio format Playing time Playback status
(3: play / 8: pause)
Video format
MPEG/JPEG MP3/WMA/WAV: Folder no./
Track no.
JPEG: Folder no./File no.

Track/file information (for MP3/


WMA/WAV)
Touching an information bar
scrolls the text if not all of the
While playing, the jacket picture is shown if the file has the tag text is shown.
data including the jacket picture.
[ ] Displays folder/track list. ( page 20) [ ] Switches between the internal and
[ ] Selects repeat playback mode. *1 *2 external memory source of the
SONGS: Repeats current connected device (such as mobile
track. phone).
FOLDER: Repeats all tracks of [6] Starts/pauses playback.
the current folder. [4] []*3 Selects track. (Press)
[ ] Selects random playback mode. *1 *2 Reverse/forward search.*4 (Hold)
FOLDER: Randomly plays all [ ][ ] Selects folder.
tracks of the folder. [Mode] Changes the settings for <File Type>
ALL: Randomly plays all tracks. and <Monitor Type>. (below)
[AV MENU] Displays <AV Menu> screen.
Available items differ depending on the types of playback file.
*1 To cancel random or repeat mode, press the button repeatedly until the indicator disappears.
*2 You cannot activate the repeat mode and the random mode at the same time.
*3 The icon displayed between the buttons varies depending on the file type.
*4 Search speed varies depending on the file type.
Setting <File Type> Setting <Monitor Type>
Audio Plays back audio files. Select the monitor type to watch a wide screen picture
Still Picture Plays back JPEG files. on the external monitor.
Video Plays back MPEG1/MPEG2 files. 16:9 4:3 LB 4:3 PS
Audio&Video Plays back audio files and MPEG1/ (Letterbox) (PanScan)
MPEG2 files.
If the USB device contains no files of the selected
type, the existing files are played in the following
priority: audio, video, then still picture.
25
Downloaded from www.Manualslib.com manuals search engine
ENGLISH
Listening to the iPod/iPhone device
To use App of iPod touch/iPhone (such as MotionX-GPS Drive),  page 30.
To listen to PANDORA internet radio,  page 32.

Preparation
iPod/iPhone that can be connected to this unit:
Setting <AV Input> for iPod/iPhone
Made for playback
iPod with video (5th Generation) Select appropriate input setting for <AV Input>
iPod classic according to the connection method of the iPod/iPhone.
iPod nano (6th Generation)
iPod nano (5th Generation) 1 Turn off the AV source.
iPod nano (4th Generation) On <AV Menu> screen:
iPod nano (3rd Generation)
iPod nano (2nd Generation)
iPod nano (1st Generation)
iPod touch (4th Generation)
iPod touch (3rd Generation)
iPod touch (2nd Generation)
iPod touch (1st Generation) 2 Display <Input> setting screen.
iPhone 4
iPhone 3GS
iPhone 3G
iPhone

Connecting iPod/iPhone
Connect your iPod/iPhone using the appropriate cable
according to your purpose.
To listen to music: USB 2.0 cable (accessory of the
iPod/iPhone)
To iPod/iPhone
3

USB cable from the


rear of the unit

To watch video and listen to music: USB AV-IN Select this when the iPod/iPhone is
Audio and Video cable for iPod/iPhoneKS-U30 connected by using USB 2.0 cable
(separately purchased) (Installation/Connection (accessory of the iPod/iPhone).
Manual) iPod Select this when the iPod/iPhone is
connected by using KS-U30 (separately
Caution: purchased).
Video is not displayed on the screen if connected with
any cable other than KS-U30.

26
Downloaded from www.Manualslib.com manuals search engine
Setting iPod control mode Selecting preference settings
Select the unit controlling iPod/iPhone playback. for iPod/iPhone playback

ENGLISH
When the source is iPod... When the source is iPod...
1 1

2 2

Head Controls playback from this unit.


( page 28) Audiobooks Select the speed of audio books.
iPod Controls audio/video playback from Artwork Shows/hides the iPod artwork.
the iPod/iPhone.
Playback information is shown.
iPod Displays the menu and playback
Out * screen output from iPod/iPhone.
(page 29)
You can control playback from
this unit in the same way as on
the iPod/iPhone.

When using iPod nano (1st Generation) or iPod


with video (5th Generation) with <iPod> selected
for <iPod Control>, select <iPod> for <AV
Input> and connect iPod using KS-U30 (separately
purchased). (page 26)
Notice:
When operating an iPod/iPhone, some operations
* <iPod Out> is available only for the following iPod/
may not be performed correctly or as intended. In
iPhone models:
iPod nano (6th Generation) this case, visit the following JVC web site: <http://
iPod touch (4th Generation) www3.jvckenwood.com/english/car/> (English
iPod touch (3rd Generation) website only)
iPod touch (2nd Generation)
iPhone 4
iPhone 3GS For some iPod/iPhone models, the performance
iPhone 3G may be abnormal or unstable during operation. In
this case, disconnect the iPod/iPhone device, then
check its condition.
If the performance is not improved or slow, reset
your iPod/iPhone.

27
Downloaded from www.Manualslib.com manuals search engine
iPod/iPhone playback operations for <Head> mode
ENGLISH
When the operation buttons are not displayed on the screen, touch the area shown on
the illustration.
To change settings for video playback,  page 43.

Select iPod as the source. ( page 12)


Make sure to select <Head> for <iPod Control>. ( page 27)
When you turn on this unit, the iPod/iPhone is charged through the unit.

Track no./Total track number/


Playing time Playback mode ( below)
iPod control mode
( page 27) Playback status ( 3:
play/8: pause)

Song/video information
Touching an information bar
scrolls the text if not all of
the text is shown.

While playing, Artwork (the picture displayed on the screen of iPod/iPhone) is shown if the song
contains the Artwork ( page 27).

[ ] Displays the Music/Video menu on [6] Starts/pauses playback.


the iPod/iPhone. ( page 29) [4] [] Selects a track/video. *2 (Press)
[ ] Selects Repeat playback mode. *1 Reverse/forward search. (Hold)
SONGS: Functions the [Mode] Changes the settings for iPod
same as Repeat One. playback. ( page 27)
[ ] Selects Random playback mode. *1 [AV MENU] Displays <AV Menu> screen.
SONGS: Functions the same
as Shuffle Songs.
ALBUMS: Functions the
same as Shuffle Albums.

To watch the video, select an item on the list of the Video menu. ( page 29)

*1 To cancel random and repeat mode, press the button repeatedly until the indicator disappears.
*2 You cannot resume playback for video sources.

28
Downloaded from www.Manualslib.com manuals search engine
Selecting a track/video from menu iPod/iPhone playback
on the iPod/iPhone operations for <iPod Out>

ENGLISH
1 mode
Connect the iPod touch/iPhone using KS-U30
(separately purchased). ( Installation/Connection
Manual)
2 Select the menu (Music or Video) (1), a
Select <iPod> for <AV Input> setting. (page 26)
category (2), then a desired item (3). Make sure to select <iPod Out> for <iPod
Select the item in the selected layer until a
Control>. ( page 27)
desired track starts playing.
Select iPod as the source. ( page 12)
Music menu:
Switches between Music ( ) and Video
Selecting a track from the menu on
( ) the iPod/iPhone
*

Returns to the top layer Returns to the [5] [] Selects a category.


previous layer [Select/6] Confirms the selection.
[iPod Menu] Returns to the previous layer.
Plays all items in the layer

Video menu: Operations during playback


Switches between Music ( ) and Video
( )

[2] [3] Skips to the previous/next track.


[Select/6] Starts/pauses playback.
Available categories differ depending on the type of [iPod Menu] Displays the menu.
your iPod/iPhone.
* You can switch to the top of the category by pressing
the corresponding tab: Playlist ( ), Artist ( ),
Albums ( ) or Songs( ).

29
Downloaded from www.Manualslib.com manuals search engine
Using an App of iPod touch/iPhone
You can use an App of the connected iPod touch/iPhone on this unit.
ENGLISH
You can operate some functions of an App on the touch panel.

Preparation
Connect the iPod touch/iPhone using KS-U30 (separately purchased). ( Installation/Connection Manual)
Select <iPod> for <AV Input> setting. (page 26)
For Apps you can use on this unit, visit <http://mobile.jvc.com>.

1 Start App on your iPod touch/iPhone. When you use an App of the iPod touch or iPhone,
see also page 68 for safety instructions.
2 Select Apps as the source.
On <AV Menu> screen: Displaying the screen of App while
listening to other source
You can switch the display to screen of App (such as
MotionX-GPS Drive) from connected iPod touch/iPhone
while listening to other source.
You can also play back the audio/video using iPod/ Activating input of iPod touch/iPhone to
iPhone itself instead of the unit. show buttons for switching display
You can operate for basic playback on the touch
1 Turn off the AV source.
panel.
On <AV Menu> screen:
Audio

2 Display <Input> setting screen.

Video

When using MotionX-GPS Drive, operating buttons


and information are not shown. You can perform the
operations on the touch panel, such as scrolling the
map.

30
Downloaded from www.Manualslib.com manuals search engine
3 Select <iPhone> for <Input> setting To view the screen of App
on <Navigation Input> screen. On <AV Menu> screen:

ENGLISH
or
On source control screen:

When <Input> is set to <iPhone>, [Apps] button


is shown on the <AV Menu> screen, and [ ]
button is shown on the source control screen. You can To cancel the screen of App
display the screen of App by pressing either button.
(below)
When <Input> is set to <iPhone>, <AV Input>
setting is automatically changed and fixed to
<iPod>.

To deactivate, select <Off> for <Input>.

31
Downloaded from www.Manualslib.com manuals search engine
PANDORA internet radio operations (only for KW-ADV64BT/KW-AV60BT/KW-AV60)
ENGLISH
Preparation
Install the latest version of the PANDORA application on your iPhone.

Select Pandora as the source. ( page 12)


You can operate PANDORA using the remote controller (for KW-AV60BT/KW-AV60: separately purchased). Only
playing, pausing, and skipping are available.

Station name/Playing time

Playback status ( 3: play/8: pause)

Song information
Touching an information bar
scrolls the text if not all of
the text is shown.

The picture data is displayed if available from the current content.

[ ] Displays the Station List. ( page 33) [6] Starts/pauses playback.


[ ] Registers the current song as favorite. [] Skips the current song.
Thumbs down to the current song Not available when the PANDORA
[ ] skip reaches its limit.
and skips to the next song.
Bookmarks the artist. [AV MENU] Displays <AV Menu> screen.
[ ]
[ ] Bookmarks the current song.

32
Downloaded from www.Manualslib.com manuals search engine
Selecting station from the Station List
About Pandora internet radio
Appears when Quick Mix is activated (All songs in the The requirements for listening to Pandora are as

ENGLISH
registered stations are played randomly) follows:
Use an Apple iPhone or iPod touch running
Appears when the station is shared under iOS3 or later.
Search for Pandora in the Apple iTunes App
Store to find and install the most current
version of the Pandora application on your
device.
In the application on your device, log in and
create an account with Pandora. (If you are not
already a registered user, an account can also
be created at <www.pandora.com>)
Changes the page
Internet connection by 3G, EDGE, or WiFi.
To sort the Station List Pandora is available only in the U.S.
[By Date] Sorts the list in reverse chronological Because Pandora is a third-party service, the
order. specifications are subject to change without
prior notice. Accordingly, compatibility may
[AZ] Sorts the list in alphabetical order.
be impaired or some or all of the services may
The letter selection screen appears.
become unavailable.
Select a letter, and the stations with
Some functions of Pandora cannot be operated
the selected letter as their initial
from this unit.
come to the top.
For issues using the application, please contact
Pandora at <pandora-support@pandora.com>

33
Downloaded from www.Manualslib.com manuals search engine
ENGLISH
Using other external components
When the operation buttons are not displayed on the screen, touch the area shown on
the illustration.
To change settings for video playback,  page 43.

AV-IN name* (  below)

Source type (AV-IN or


Front AUX)

[Mode]* Changes the AV-IN name.


Press [2] or [3] to select an AV-IN name.
[AV MENU] Displays <AV Menu> screen.

* Appears when AV-IN is selected as the source.

Front AUX AV-IN


1 Connect an external component. You can connect an external component to the LINE IN/
VIDEO IN jacks. ( Installation/Connection Manual)

Preparation:
Select <AV-IN> for <AV Input> setting. ( page 47)
<AV Input> setting can be changed only when
<Input> setting in <Navigation Input> is set to
<Off>.
3.5 mm stereo mini plug 1 Select AV-IN as the source. ( page 12)
(not supplied) 2 Turn on the connected component and
start playing the source.
2 Select FrontAUX as the source.
( page 12)
3 Turn on the connected component and
start playing the source.

34
Downloaded from www.Manualslib.com manuals search engine
Listening to the SiriusXM Radio (only for KW-ADV64BT/KW-AV60BT/KW-AV60)

ENGLISH
Before operating, connect the SiriusXM tuner (not supplied) to the expansion port on the rear of the unit. (
Installation/Connection Manual)
Everything worth listening to is on SiriusXM, getting over 130 channels, including the most commercial-free music,
plus the best sports, news, talk and entertainment. To start listening to the SiriusXM Satellite Radio, A SiriusXM
Vehicle Tuner (separately purchased) and Subscription are required. For more information, visits www.siriusxm.com.
Activating subscription
1 To listen to SiriusXM Satellite Radio, a subscription is required. Activate the SiriusXM
Vehicle Tuner using one of the two methods below:
Online: Go to www.siriusxm.com/activatenow
Phone: Call 1-866-635-2349
2 Check your Radio ID.
Radio ID is labeled on the casing of the SiriusXM Tuner or the bottom of the Sirius XM Tuner unit.
You can also display the Radio ID on the screen by tuning in to Channel 0.
To hide the ID display, select any channel other than 0.
3 Select Satellite as the source. ( page 12)
SiriusXM Tuner starts updating all the SiriusXM channels.
Tuning in to a channel
Preset no. Signal Reception indicator

Channel no./Channel name


Band Category name

Preset list

[P1] [P6] Tunes in the preset channel. (Press) [BAND] Selects the band.
Presets the currently tuned channel.
(Hold) [4] [] Selects a channel. (Press)
[3] Displays/hides the information of the Changes the channel rapidly. (Hold)
current channel. ( page 36) While searching, invalid and
[ ] Displays the Category/Channel List. unsubscribed channels are
( page 36) skipped.
[CH Direct] Displays direct channel selecting [ ][ ] Selects a preset channel.
screen. ( page 36) [Mode] Changes the settings of the reception
restrictions. ( page 37)
[AV MENU] Displays <AV Menu> screen.

35
Downloaded from www.Manualslib.com manuals search engine
Displaying the information of the current Selecting a preset channel
ENGLISH channel

Also changes preset channels

Selecting a channel on the list


1

2 Select a category (1), then a channel


(2) from the selected category.
Hides the text information Current channel no./
Text information Current category channel name
Scrolls the text information

Storing channels in memory


You can preset six channels for each band.

1 Tune in to a channel you want to preset.


( page 35)
2 Select a preset number.
Selecting a channel directly
1

(Hold) 2 Enter the desired channel no. (1), then


confirm (2).

The channel selected in step 1 is stored.

To clear the entry, press [Clear].

36
Downloaded from www.Manualslib.com manuals search engine
Setting the reception restrictions
Setting the parental lock Activating the parental lock

ENGLISH
You can set the parental lock in order to, for example, 1 On <Mode> screen:
restrict children from receiving adult channels.
Setting the parental code
Initial setting is 0000.
Changing the code does not change the <P.Lock
Channel Select> and <Skip Channel Select>
settings.
1 Display <Parental Code> screen.
2 Enter your parental code number (1),
then confirm the entry (2).

Deletes last character


2 Enter the new code number to <New 3 Select the category (1), then the
Code> input box (1), then confirm the
channel you want to activate the
entry (2).
parental lock for (2).

Deletes last character


The icon appears beside the channel with the
3 Repeat the above procedure to enter parental lock activated.
the same code to <Confirm Code> input
box.
To change the parental code, press [Change] on
step 1, enter current code, then new code on step 2
above.
To initialize the parental code registration,
press [Clear] for <Parental Code> on <Mode>
screen.
37
Downloaded from www.Manualslib.com manuals search engine
To cancel the selection, select the locked channel Skipping the unwanted channels
again in Step 3. The icon disappears and the
If you do not want to receive some channels, you can
selection is canceled.
ENGLISH
skip them.
When you try to receive a channel with the parental
lock activated, the parental code input screen Setting the channel skipping
appears and you cannot receive the channel until you 1 Activate the channel skip.
enter the correct code. 0n <Mode> screen:
To clear parental lock for all locked
channel
1 0n <Mode> screen:

2 Select the category (1), then the


channel you want to skip (2)

2 Enter your parental code number (1),


then confirm the entry (2).

The icon appears beside the selected channels.


Repeat this step if you want to skip more
channels.
To clear the channel skipping for all
Deletes last character
skipped channels
0n <Mode> screen:

(Hold)

38
Downloaded from www.Manualslib.com manuals search engine
Sound adjustment

ENGLISH
Using the sound equalization
The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the
adjustment is stored for each of the following categories.
DVD/DVD-VR/ VCD
CD
DivX/MPEG1/MPEG2/MP3/WMA/WAV
You cannot adjust the sound when the AV source is turned off.

Selecting a preset sound mode Storing your own adjustment


1 On <AV Menu> screen: Customizing preset sound mode
1 Select a sound mode. ( Selecting a preset
sound mode)
2 Adjust the level of each band (1), then
select the subwoofer level (2).

or
On the source control screen:

The adjustments are stored and <User> is


activated.
To finish the procedure, press [ ].
To make precise adjustments, page 40.
2 Select a sound mode.

Changes the page

39
Downloaded from www.Manualslib.com manuals search engine
Adjusting the sound precisely Adjusting the crossover
ENGLISH 1 Perform steps 1 and 2 of Selecting a frequency
preset sound mode, then...
1 On <AV Menu> screen:

2 Select a band.
2

3 Adjust the sound.

3 Select the item to adjust, then make


adjustments.
Adjusts the crossover for front or rear speakers
(high pass filter).
Reset Changes level of Low/Mid/
High to 0.
Freq Selects frequency.
Q Adjusts the width of the
frequency.*1
Bass Activates/deactivates bass.*2
SW Level Adjusts subwoofer level.
The adjustments are overwritten if <User> Adjusts the crossover for subwoofer (low pass filter).
setting has been made ( page 39), and <User>
is activated.

The adjustments are memorized until you


adjust sound again.
To make adjustment for other bands, repeat
steps 2 and 3.

*1 Fixed for High band. Adjusts the crossover frequency.


*2 Only for Low band.
Selects the phase for the subwoofer.*
Adjusts the subwoofer level.

* Not selectable when <Freq> is set to <Through>.

40
Downloaded from www.Manualslib.com manuals search engine
Changing display design

ENGLISH
You can change the background, the color of text, touch panel buttons, and monitor panel buttons.

1 On <AV Menu> screen:


2 Select/adjust the color

2
Color palette
Dimmer setting: You can make selections for each
dimmer setting< > (Dimmer On) or < >
(Dimmer Off)
User color adjuster: You can make your own
color adjustment and store it to <User>

Text/Buttons
Select/adjust the color. (For details,  above.)
3 Select an item (<Backgrnd>, <Text> or
<Buttons>), then change the setting. Variable color illumination*
Illumination color changes gradually.

Background
1 Select a background
Basic image (default)

* Appears only for button color selecting screen.


When variable color illumination is selected, you
cannot adjust the color.
You can select a color on the color
palette or adjust the color on the user
color adjuster ( the right column)
For setting your favorite scene as the background,
 page 42

41
Downloaded from www.Manualslib.com manuals search engine
Using your favorite scene as the 5 Capture the image displayed on the
ENGLISH background screen.
While playing a video or JPEG, you can capture an image
and use the captured image as a background.
You cannot capture copyrighted content and image
from iPod/iPhone.
When using a JPEG file as the background, make sure
that the resolution is 800 x 600 pixels.
The color of the captured image may look different
from that of the actual scene.
1 Play back a video or JPEG.
2 Display <Display Design> screen. A confirmation message appears. Press [Yes] to
(page 41) store the newly captured image. (The existing
3 image is replaced with the new one.)
Press [No] to return to the previous screen.

4 Adjust the image.

[6] *1 Starts/pauses playback.


[E] *1 Advances scenes frame-by-frame.
[3] Magnifies the scene. (<Full>,
<Zoom1> <Zoom3>)
[5] []
Moves the zooming frame.
[2] [3] *2
To cancel the capture, press [ ].

*1 Not displayed when playing an external


component connected to LINE IN/VIDEO IN jacks.
2
* Not displayed when <Full> is selected.

42
Downloaded from www.Manualslib.com manuals search engine
Setting for video playback

ENGLISH
You can change the setting for video playback.

Adjusting the picture 3 Adjust the picture (15 to +15).


You can adjust the picture quality.
1 Display the adjustment menu. Adjusts the brightness
Adjusts the contrast
Adjusts the blackness
Adjusts the color
Adjusts the tint *
Adjusts the detail

* Adjustable only when the incoming signal is


NTSC.

2 Select Dimmer On (< >) or Off


(< >).

43
Downloaded from www.Manualslib.com manuals search engine
Changing the aspect ratio Zooming the picture
You can change the aspect ratio for video playback. You can zoom the picture (<Full>, <Zoom1> to
ENGLISH
1 <Zoom3>).
When <Aspect> is set to <Panorama> or
<Auto> ( the left column), the picture is zoomed
with the aspect ratio of the <Full> setting.
1

2
4:3 signal 16:9 signal
Full*:
For 16:9 original
pictures
Panorama:
For viewing 4:3
pictures naturally
on the wide screen [5] [] [2] [3]* : Moves the zooming frame.
Regular*:
For 4:3 original * Not displayed when <Full> is selected.
pictures
Zooming function cannot be used for some video
Auto: For DISC/ USB
sources.
only: Aspect ratio is
automatically selected to
match to the incoming
signals.
* While DivX is played back with <Monitor Type>
set to <16:9> ( page 23), the aspect ratio is not set
correctly.

44
Downloaded from www.Manualslib.com manuals search engine
Using a rear view camera

ENGLISH
To use a rear view camera, the REVERSE GEAR SIGNAL lead connection is required. For connecting a rear view
camera,  Installation/Connection Manual.

Activating the rear view camera To display the picture from the rear view
1 On <AV Menu> screen:
camera manually
On <AV Menu> screen:

To deactivate, select <Off>.


When displaying the picture from the rear view
Displaying the picture from the rear camera manually, you can change the setting of the
view camera picture. ( page 43)
The rear view screen is displayed when you shift the
gear to the reverse (R) position. To cancel the rear view screen

For KW-ADV64BT/KW-AV60BT/KW-AV60: To erase the


caution message, touch the screen.

45
Downloaded from www.Manualslib.com manuals search engine
ENGLISH
Setting menu items

When changing settings for <Amplifier Gain>, <AV Input> and <Input> setting in <Navigation Input>,
turn off the AV source. For other settings, change them when the AV source is turned on.
Menu item Selectable setting/item Initial: Underlined
Fader/Balance Fader : Adjust the front and rear speaker output balance.
z F6 to R6; Initial 0
When using a two-speaker system, set the fader to the center (0).
Balance : Adjust the left and right speaker output balance.
z L6 to R6; Initial 0
Press [ 5//2/3 ] or drag [ ] to adjust.
To clear the adjustment, press [Center].
Equalizer Change the sound mode or adjust and store the equalization for each source.
( page 39)
z Flat/Natural/Dynamic/Vocal Boost/Bass Boost/Vibrant/User
Loudness You can activate/deactivate loudness.
z On : Boost low and high frequencies to produce a well-
Audio

balanced sound at a low volume level.


z Off : Cancels.
Crossover Adjust the crossover frequency. ( page 40)
Volume Adjust Adjust and store the auto-adjustment volume level for each source. (For
discs, the adjustment is stored for each of the following categories: DVD/
DVD-VR, VCD/CD, and DivX/MPEG1/MPEG2/MP3/WMA/WAV.) The volume
level will automatically increase or decrease when you change the source.
z 15 to +6; Initial 0
Amplifier Gain * z On : Activates the built-in amplifier.
z Off : Deactivates the built-in amplifier.
Speaker Select Select the size of the connected speaker.
z Standard/Narrow/Middle/Wide

* To change the setting, turn off the AV source by pressing [AV Off] on <AV Menu> screen beforehand.

46
Downloaded from www.Manualslib.com manuals search engine
Menu item Selectable setting/item Initial: Underlined
Dimmer z Auto : Dims the screen and button illumination when you turn

ENGLISH
on the headlights.
The ILLUMI lead connection is required. (
Installation/Connection Manual)
z On : Activates dimmer.
z Off : Cancels.
z Dimmer : Sets the Dimmer On ( )/Off ( ) times.
Time Set Press [5] or [] to set the time.
Display Design Change the display design (background, the color of text, touch panel
buttons, and monitor panel buttons). ( page 41)
OSD Clock z On : Displays the clock while a video source is played back.
z Off : Cancels.
Display

Demonstration z On : Activates the demonstration on the screen.


z Off : Cancels.
Scroll z Auto : Repeats scrolling.
z Once : Scrolls the displayed information once.
z Off : Cancels.
Touching an information bar scrolls the text regardless of this setting.
GUI Adjust Adjust the brightness and blackness of the screen.
Press [Enter] to display the setting screen, select Dimmer On ( )/Off ( ),
then change the following settings:
z Brightness : Adjusts brightness (15 to +15; Initial 00 for Dimmer
On/+15 for Dimmer Off).
z Black : Adjusts blackness (15 to +15; Initial 00).
NTSC/PAL Select the color system of the external monitor.
zNTSC, PAL
AV Input *1 *2 You can determine the use of LINE IN/VIDEO IN jacks.
z AV-IN*3 : Select to use the external component connected to
LINE IN/VIDEO IN jacks or the iPod/iPhone connected by
Input

using USB 2.0 cable. ( pages 26 and 34)


z iPod : Select to use the iPod/iPhone connected by using JVC
KS-U30. ( page 26)
3 4
z BT* * : Select when playing back the Bluetooth audio player
using the Bluetooth adapter (KS-BTA100). ( page 61)
*1 To change the setting, turn off the AV source by pressing [AV Off] on <AV Menu> screen beforehand. <AV Input>
setting can be changed only when <Input> setting in <Navigation Input> is set to <Off>.
2
* The initial setting is <iPod> for KW-ADV64BT/KW-AV60BT/KW-AV60, and <AV-IN> for KW-AV68BT.
*3 When <AV Input> is set to <AV-IN> or <BT>, the video from iPod/iPhone is not displayed on the screen.
*4 Only for KW-AV60.

47
Downloaded from www.Manualslib.com manuals search engine
Menu item Selectable setting/item Initial: Underlined
Camera Input z On : Displays the picture from the rear view camera when
ENGLISH
you shift the gear to the reverse (R) position.
z Off : Cancels.
Input

Navigation Input Change the settings for displaying the screen of App from connected iPod
touch/iPhone. ( page 30)
<Navigation Mute> is not used for this unit.
Language Select the text language used for on-screen information.
z English/Espaol/Franais/Deutsch/Italiano/Nederlands/Svenska/
Dansk/cc/Portugus
Please Power Off appears when the setting is changed. Turn off the
power, then turn on to enable the change.
z GUI : Select a language (<English> or <Local>: the
Language language selected above) used for displaying operation
buttons and menu items.
Time Set Adjust the clock time. ( page 8)
Beep z On : Activates the key-touch tone.
z Off : Cancels.
System

User Profile You can memorize, recall, or clear the settings you have made. ( page 49)
Touch Panel Adjust Adjust the touch position of the buttons on the screen. ( page 50)
Initialize Initialize all settings you have made. Hold [Enter] to initialize the settings.
After initializing the settings, adjust the settings on the <Initial
Settings> screen. ( page 7)
DivX VOD This unit has its own Registration Code. Once you have played back a file
Only for KW-ADV64BT/KW- with which the Registration Code recorded, this units Registration Code is
AV60BT/KW-AV60 overwritten for copyright protection.
Press [Enter] to display the information.
To return to the previous screen, press [OK].
System Information Displays the version information on the software. You can update the
software. ( page 50)

48
Downloaded from www.Manualslib.com manuals search engine
Memorizing/recalling the settings
You can memorize the following settings:

ENGLISH
Settings on <Settings> screen: Fader/Balance, Equalizer, Loudness, Crossover (HPF/LPF/SW Level
settings), Volume Adjust, Speaker Select, Dimmer, Display Design, AV Input, Camera Input, Navigation
Settings for AV-IN: AV-IN Name

Memorizing your settings Recalling your settings


1 On <Settings> screen: Turn off the AV source by pressing [AV Off] on <AV
Menu> beforehand.
1 On <User Profile> screen ( step 2 on the left
column):

A confirmation message appears. Press [Yes].


2 Finish the procedure.

Clearing your settings


1 On <User Profile> screen ( step 2 on the left
column):

3 Select an item (<User1>, <User2> or


<User3>) to memorize the settings. 2
Clears all settings memorized in <User1>,
<User2> and < User3>

A confirmation message appears. Press [Yes].


4 Finish the procedure.
A confirmation message appears. Press [Yes].
3 Finish the procedure.

49
Downloaded from www.Manualslib.com manuals search engine
Updating the system Adjusting the touch position
You can update the system by connecting a USB device You can adjust the touch position on the touch panel if
ENGLISH
containing an update file. the position touched and the operation performed do
1 Create an update file, copy it to a USB not match.
device, and connect it to the unit. 1 On <Settings> screen:
To connect a USB device,  page 24.
2 On <Settings> screen:

2 Touch the center of the marks at the


lower left and at the upper right as
instructed.

It may take a while.


If the update has been completed successfully,
Update Completed appears. Reset the unit. To cancel the current operation, press [Cancel].
To reset to the initial setting, press [Reset].
If the update has failed, turn the power off and then
on, and retry the update.
Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from the
beginning.

50
Downloaded from www.Manualslib.com manuals search engine
BLUETOOTH OPERATIONS

ENGLISH
Information for using Bluetooth devices
Some Bluetooth devices may not be connected to
this unit depending on the Bluetooth version of the Bluetooth Information: If you wish to
device. receive more information about Bluetooth, visit
This unit may not work for some Bluetooth devices. the following JVC web site: <http://www3.
Connecting condition may vary depending on jvckenwood.com/english/car/> (English website
circumstances around you. only)
For some Bluetooth devices, the device is
disconnected when the unit is turned off.

Bluetooth operations for KW-ADV64BT/KW-AV68BT/KW-AV60BT

Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones,
portable PCs, and other devices. The Bluetooth devices can be connected without cables and communicate with each
other.
Refer to pages i and ii at the end of manual to check the countries where you may use the Bluetooth function.

Bluetooth profile
This unit supports the following Bluetooth profiles; Icons for Bluetooth button
HFP (Hands-Free Profile) 1.5 : No device is connected.
OPP (Object Push Profile) 1.1 : A Bluetooth audio player is
A2DP (Advanced Audio Distribution Profile) 1.2 connected.
AVRCP (Audio/Video Remote Control Profile) 1.3 : A Bluetooth mobile phone is
PBAP (Phone Book Access Profile) 1.0 connected.
: Both a Bluetooth mobile phone and
audio player are connected.

When shipped from the factory, the Bluetooth Keep the Bluetooth adapter attached when using
adapter (KS-UBT1) is attached. the Bluetooth function.
This port is designed for the use with KS-UBT1
Bluetooth adapter only. Other Bluetooth adapters or USB devices
(KS-UBT1) cannot be used.

51
Downloaded from www.Manualslib.com manuals search engine
Connecting Bluetooth devices
Connecting a new Bluetooth device 2 Change the PIN code.
ENGLISH
for the first time If you skip changing the PIN code, go to step 3.
When you connect a Bluetooth device to the unit
for the first time, make pairing between the unit
and the device. Pairing allows Bluetooth devices to
communicate each other. PIN code (initial: 0000)
To make pairing, you may need to enter the PIN
(Personal Identification Number) code of your Bluetooth Deletes last character
device you want to connect.
Once the connection is established, it is registered in
the unit even if you reset the unit. Up to 5 devices can
be registered in total.
Only one device for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
To use the Bluetooth function, you need to turn on
Bluetooth function of the device.
1 Display the Bluetooth setting screen. 3
On <AV Menu> screen:
Mobile phone

Audio player

For connecting a Bluetooth mobile phone

The phone setting screen is displayed.


Cancel
For connecting a Bluetooth audio player 5 Operate the Bluetooth device to
connect.
Connected appears. Press [OK] to confirm the
operation.
Now connection is established and you can use the
<Mode> screen is displayed. Bluetooth device through the unit.

52
Downloaded from www.Manualslib.com manuals search engine
Connecting/disconnecting a To disconnect
registered Bluetooth device

ENGLISH
1 Display the Bluetooth setting screen.
( page 52)
For Bluetooth mobile phone: Phone setting A confirmation message appears. Press [Yes].
screen
For Bluetooth audio player: <Mode> screen Deleting a registered Bluetooth
2 To connect device
1 On <Connect Device> screen ( Step 2 on the
left column):

Select the device you want to connect.


2 Select a device to delete the
registration.

A confirmation message appears. Press [Yes].


Connected appears. Press [OK] to confirm the
operation.
All registered devices (mobile phone and audio
player) are listed on <Connect Device>.
To detach the Bluetooth adapter
Selectable items depend on the device you
are operating.
When a mobile phone is connected, holding JVC
[ ] on the source control screen switches
between the last connected mobile phone and
current one.

Store the Bluetooth adapter in the supplied bag.


When inserting the Bluetooth adapter again,
attach it firmly with the JVC logo facing up.

53
Downloaded from www.Manualslib.com manuals search engine
Using the Bluetooth mobile phone
Receiving a call Adjusting the volume of
ENGLISH

When a call comes in... microphone


Status of the device/Battery While talking...
reminder (only when the Call information
information comes from the device) (if acquired)

This adjustment does not affect the volume level of


the other sources.
To adjust the volume of calls/earpiece, turn the
volume adjustment knob.
Rejects the call
Switching between handsfree mode
Phone operation is not available while the picture and phone mode
from the rear view camera is displayed. ( page 45)
While talking...
When <Auto Answer> is set to <On>
The unit answers the incoming call automatically.
( page 60)

Ending a call Each time you press the button, the talking method is
While talking... switched ( : handsfree mode / : phone
mode).

Checking SMS reception


If the mobile phone is compatible with SMS (Short
Message Service), the unit tells you a message has been
received.

To read a received message, operate the mobile


phone after stopping the car in a safe place.
You cannot read, edit, or send a message through
the unit.

For some mobile phones, the notification message


may not be shown even if the SMS function is
supported.

54
Downloaded from www.Manualslib.com manuals search engine
Making a call Direct number entry
1 On the source control screen: Deletes last character

ENGLISH
Hold: Adds +
You can also display the phone control screen by
pressing [ Phone] on <AV Menu> screen. Presets the entered phone number on
the preset list ( page 57)

You can enter up to 32 numbers.

Voice Dialing
2 Select a method to make a call. Available only when the connected mobile phone has
Preset list/phone book/call the voice recognition system.
Direct number entry
(the right column) lists ( page 56)

Speak the name you want to call.


Preset list (For presetting,  page 57)
Voice dialing ( the right column) To cancel, press [Cancel].

To reduce echo/noise while talking


Make sure that NR/EC (Noise reduction/Echo cancel)
function is activated on the screen while talking.

Select <On> to reduce the noise and cancel the echo


while talking.

55
Downloaded from www.Manualslib.com manuals search engine
Using the preset list/phone book/call lists 2 Select the initial.
ENGLISH 1

[Preset] From preset list


[ ] From dialled call list.
[ ] From received call list.
Displays the other letters
[ ] From missed call list.
[ ] From phone book. 3 Select a phone number from the list.
For copying the phone book,
 page 57.

To display the details of an entry


When phone book list screen is displayed, you can
display the details of an entry and select a phone
2 number if several phone numbers are registered.
1 Display the details of the desired entry.

2 Select a phone number to call.


To use the A to Z search on phone book
When phone book list screen is displayed, you can
search by initial.
1

56
Downloaded from www.Manualslib.com manuals search engine
Presetting the phone numbers Copying the phone book
You can preset up to 6 phone numbers. You can copy the phone book memory of a mobile

ENGLISH
1 On the source control screen: phone into the unit (up to 400 entries).
1 On the source control screen:

2 Select an item from phone book/call


lists. 2

3 Select a phone number.

(Hold)

4 Select a preset number to store.


PIN code (initial: 0000)

Numbers of the phone book entries copied

3 Operate the target mobile phone.


You can also preset a phone number entered on the Refer to the instruction manual supplied with
direct number entry screen by pressing [Save]. ( your mobile phone.
page 55) To cancel the transfer, press [Finish].
4 Finish the procedure.

The phone book memory is copied from the


mobile phone.

57
Downloaded from www.Manualslib.com manuals search engine
Deleting the phone number entries About mobile phones compatible
ENGLISH in the unit with Phone Book Access Profile
1 Display the preset list/phone book/call (PBAP)
list you want to delete. ( page 56) If your mobile phone supports PBAP, the phone book
2 and call lists are automatically copied to the unit when
the mobile phone is connected.
Phone book: up to 5 000 entries
Dialled calls, received calls, and missed calls: up to 50
entries each

To display the phone book/call lists of the


mobile phone or the unit
You cannot delete data when <Phone> is Connected mobile phone
selected.
3 Select the item you want to delete.

This unit

Delete all the numbers/names in the selected list

A confirmation message appears. Press [Yes].

58
Downloaded from www.Manualslib.com manuals search engine
Using the Bluetooth audio player
To register a new device,  page 52.

ENGLISH
To connect/disconnect a device,  page 53.

Status of the device/Battery reminder


(only when the information comes Playback mode *1 ( below)
from the device) Track no./Playing time *1

Playback status
(3: play / 8: pause) *1
 page 51
Tag data (current track title/artist
name/album title) *1
Touching an information bar
scrolls the text if not all of the
text is shown.
The operation buttons, indications and information displayed on the screen differ depending on the
connected device.
[8] Pauses playback. [4] [] Selects track. (Press)
[ ] Selects Repeat playback mode. *1 *2 Reverse/forward search. (Hold)
[ ] Selects Random playback [Mode] Displays the Bluetooth setting
mode. *1 *2 screen. ( page 60)
[3] Starts playback. [AV MENU] Displays <AV Menu> screen.

*1 Available only for the devices compatible with AVRCP 1.3.


*2 To cancel random and repeat mode, press the button repeatedly until the indicator disappears.

59
Downloaded from www.Manualslib.com manuals search engine
Bluetooth device settings
ENGLISH Mobile phone Bluetooth audio player
On BT Audio source control screen:

Menu items Selectable setting/item Initial: Underlined


Connection z Connect :  page 53
z Disconnect :  page 53
PIN Code Changes the PIN code of the unit.
Touch the current PIN code, enter a new PIN code, then press [Save].
Device Name Shows the device name to be shown on the Bluetooth deviceJVC Unit.
Device Address Shows the MAC address of the unit.
Phone Device*1 Shows the phone device name.
Audio Device*2 Shows the audio device name.
Auto connect z On : The connection is automatically established with the last connected
Bluetooth device when the unit is turned on.
z Off : Cancels.
HF/Audio Select the speakers used for Bluetooth (both phone use and audio player).
Output z Front : From front speakers only.
z All : From all speakers.
Initialize Hold [Enter] to clear the registration of Bluetooth devices and memory of the preset list and
call lists.
Auto Answer*1 z On : The unit answers the incoming calls automatically.
z Off : The unit does not answer the calls automatically. Answer the calls
manually.
SMS Notify*1 z On : The unit informs you of the arrival of a message by ringing and
displaying Receiving Message.
z Off : The unit does not inform you of the arrival of a message.
Ring Mode*1 z System : Selects the ring tone set on the unit.
z Phone : Selects the ring tone set on the mobile phone. (This function may not
work depending on the mobile phone.)
Ring Tone When <Ring Mode> is set to <System>, press [Enter], then select the ring tone for
Change*1 received calls and SMS from <Tone1>, <Tone2>, <Tone3>.
z Call Tone : Selects the ring tone for phone calls.
z Message Tone : Selects the ring tone for SMS.
*1 Appears only for the phone setting screen.
*2 Appears only for <Mode> screen while BT Audio is selected as the source.

60
Downloaded from www.Manualslib.com manuals search engine
Bluetooth operations for KW-AV60

ENGLISH
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately purchased) to the
LINE IN terminals on the rear of the unit. ( the Installation/Connection Manual)
KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this unit.
For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
Operations may be different according to the connected device.

Preparation
1 Register (pair) a Bluetooth device with KS-BTA100.
Refer to the instructions manual supplied with KS-BTA100.
2 Select <BT> for <AV Input> setting. ( page 47)
Using the Bluetooth mobile phone
KS-BTA100 Adjusting the microphone volume
(Low) (High) Volume level: High/Normal (initial)/Low
Receiving a call
When a call comes in...
Making a call
(Press)
Making a call to the last connected number from your phone.
Switching between handsfree and phone
While talking...
Microphone Ends/rejects call
Voice dialing
Voice dialing is available only when the connected mobile phone
(Hold)
has the voice recognition system.

About microphone volume:


When you turn off the power of the unit, the volume level changes to Normal.
Using the Bluetooth audio player
1 Select Bluetooth as the source. ( page 12)
KS-BTA100
Starts playback/pauses.
If playback does not start, operate the Bluetooth audio player to
start playback.
Selects track. (Press)
Fast-forwards or reverses the track. (Hold)

61
Downloaded from www.Manualslib.com manuals search engine
ENGLISH REFERENCE
Using the remote controller
For KW-AV60BT/KW-AV60 : To use the remote controller, purchase RM-RK252P separately.

If the effectiveness of the remote controller


Installing the batteries
decreases, replace the batteries.
R03/LR03/AAA
Before using the remote controller:
Aim the remote controller directly at the remote
sensor on the unit.
DO NOT expose the remote sensor to bright light
Insert the batteries into the remote controller by (direct sunlight or artificial lighting).
matching the polarity (+ and ) correctly.
The unit is equipped with the steering wheel
remote control function.
Caution:
See the Installation/Connection Manual
Danger of explosion if battery is incorrectly replaced.
(separate volume) for connection.
Replace only with the same or equivalent type.
Operations may differ depending on the types of
Battery shall not be exposed to excessive heat such as
the steering wheel remote control.
sunshine, fire, or the like.

Operations using the remote controller (RM-RK252)


Button Operations Button Operations
ATT / Attenuates/restores the sound. Tuner:
Searches for stations
DISP Does not function for this unit.
automatically.
Tuner: Selects the preset stations. Searches for stations manually.
SiriusXM radio *1: Selects a (Hold)
5/
category. / SiriusXM radio*1 :
Selects a title/item/folder. Selects a channel.
Selects a channel rapidly. (Hold)
Selects track.
Reverse search/forward search.
(Hold)
Reverse search/forward search.
DVD-Video/DVD-VR/VCD: Slow
1/ motion playback (during pause).
DVD-VR/VCD: Reverse slow
motion does not work.

62
Downloaded from www.Manualslib.com manuals search engine
Button Operations Button Operations
Adjusts the volume level. ENT Confirms selection.

ENGLISH
VOL +/VOL 2nd VOL function does not
OSD/ Does not function for this unit.
work for this unit.
DUAL/ Does not function for this unit.
SOURCE Selects the source.
SHIFT Functions with other buttons.
6 Starts/pauses*2 playback.
Enters direct search mode when
PHONE / Answers incoming calls.*3
pressed with SHIFT button.
Selects the bands. ( page 64)
Stops playback. DIRECT/CLR Erases the misentry when
BAND / 7/
Ends the call. pressed with SHIFT button.
Pauses playback of Bluetooth SURROUND function does not
audio.*3 work for this unit.
Enters a number while holding *1 Only for KW-ADV64BT/KW-AV60BT/KW-AV60.
09 SHIFT. *2 Does not work while listening to Bluetooth audio.
( page 64) SETUP function does not work *3 Only for KW-ADV64BT/KW-AV68BT/KW-AV60BT.
for this unit.
Enters preset station number while
16
holding SHIFT.
Changes the aspect ratio.
To check the current aspect ratio
ASPECT
setting, operate on the touch
panel. ( page 44)
RETURN Returns to the previous screen.
DVD-Video: Shows the disc
menu.
TOP M
DVD-VR: Shows the Original
( page 64)
Program screen.
VCD: Resumes PBC playback.
DVD-Video: Shows the disc
menu.
MENU
DVD-VR: Shows the Playlist
( page 64)
screen.
VCD: Resumes PBC playback.
DVD-Video: Makes selection/
settings.
% //@ / #
DivX*1: Skips back or forward by
about 5 minutes.

63
Downloaded from www.Manualslib.com manuals search engine
Searching for an item directly Various disc operations
Tuner frequency Using the disc menu
ENGLISH
1 Press DIRECT while holding SHIFT to enter the DVD-Video/DVD-VR
search mode. 1 For DVD Video, press TOP M or MENU.
2 Press number buttons while holding SHIFT to enter For DVD-VR, press...
a frequency. TOP M: To display Original Program
To erase a misentry, press CLR (clear) while MENU: To display Playlist
holding SHIFT. 2 Press % / /@ / # to select an item you want to
3 Press ENT to confirm the entry. play.
3 Press ENT to confirm the selection.
DVD-Video/DVD-VR/DivX/MPEG1/MPEG2/JPEG/
MP3/WMA/WAV/VCD/CD VCD
1 Press DIRECT while holding SHIFT to enter the During PBC playback...
search mode. 1 Press DIRECT while holding SHIFT to enter the
Each time you press DIRECT, the item to search search mode.
for changes. 2 Press a number button while holding SHIFT to
2 Press a number button while holding SHIFT to select the item you want to play.
select a desired item. 3 Press ENT to confirm the selection.
To erase a misentry, press CLR (clear) while
holding SHIFT. To return to the previous screen, press RETURN.
3 Press ENT to confirm the selection.
To cancel PBC playback
1 Press 7 to stop PBC playback.
2 Press DIRECT while holding SHIFT.
3 Press a number button while holding SHIFT to
select a desired track.
4 Press ENT to confirm the selection.

To resume PBC, press TOP M or MENU.

64
Downloaded from www.Manualslib.com manuals search engine
Maintenance

ENGLISH
Caution on cleaning the unit To keep discs clean
Do not use any A dirty disc may not play correctly.
solvent (for If a disc does become dirty, wipe it with a
example, thinner, soft cloth in a straight line from center to
benzine, etc.), edge.
detergent, or Do not use any solvents (for example, conventional
insecticide. This may damage the monitor or the unit. record cleaner, spray, thinner, benzine, etc.) to clean
Recommended cleaning method: discs.
Gently wipe the panel with a soft, dry cloth.
To play new discs
How to clean the connector New discs may have some rough spots
Frequent detachment Connectors around the inner and outer edges. If
will deteriorate the such a disc is used, this unit may reject
connectors. the disc.
To minimize this To remove these rough spots, rub the edges with a
possibility, periodically pencil or ball-point pen, etc.
wipe the connectors
with a cotton swab or cloth moistened with alcohol,
being careful not to damage the connectors.
Do not use the following discs:
3 inch disc Warped disc
Moisture condensation
Moisture may condense on the lens inside the unit in
the following cases:
After starting the heater in the car.
Sticker and sticker
If it becomes very humid inside the car. residue Stick-on label
Should this occur, the unit may malfunction. In this
case, eject the disc and leave the unit turned on for a
few hours until the moisture evaporates.

How to handle discs C-thru Disc (semi-


When removing a disc from Unusual shape transparent disc)
its case, press down the center Center holder
holder of the case and lift the
disc out, holding it by the edges.
Always hold the disc by the
Transparent or semi-
edges. Do not touch its recording surface.
transparent parts on its
When storing a disc in its case, gently insert the recording area
disc around the center holder (with the printed surface
facing up).
Make sure to store discs in their cases after use.

65
Downloaded from www.Manualslib.com manuals search engine
ENGLISH
More about this unit
File playback Playing MP3/WMA/WAV files
This unit can play back files with the extension code
Playing DivX files (for discs only) <.mp3>, <.wma>, or <.wav> (regardless of the
This unit can play back DivX files with the extension letter caseupper/lower).
code <.divx>, <.div>, or <.avi> (regardless of the This unit can play back the files meeting the
letter caseupper/lower). conditions below:
Audio stream should conform to MP3 or Dolby Bit rate:
Digital. MP3/WMA: 32 kbps 320 kbps
The file encoded in the interlaced scanning mode Sampling frequency:
may not be played back correctly. 48 kHz, 44.1 kHz, 32 kHz (for MPEG1)
The maximum bit rate for video signals (average) is 24 kHz, 22.05 kHz, 16 kHz (for MPEG2)
4 Mbps. 48 kHz, 44.1 kHz, 32 kHz, 22.05 kHz (for WMA)
44.1 kHz (for WAV)
Playing MPEG1/MPEG2 files This unit can show ID3 Tag Version
This unit can play back MPEG1/MPEG2 files with the 1.0/1.1/2.2/2.3/2.4 (for MP3).
extension code <.mpg>, <.mpeg>, or <.mod>. This unit can also show WAV/WMA Tag.
The stream format should conform to MPEG system/ This unit can play back files recorded in VBR (variable
program stream. bit rate).
The file format should be MP@ML (Main Profile at Files recorded in VBR have a discrepancy in elapsed
Main Level)/SP@ML (Simple Profile at Main Level)/ time indication.
MP@LL (Main Profile at Low Level). This unit cannot play back the following files:
Audio streams should conform to MPEG1 Audio MP3 files encoded with MP3i and MP3 PRO
Layer-2 or Dolby Digital. format.
The maximum bit rate for video signals (average) is MP3 files encoded with Layer 1/2.
4 Mbps. WMA files encoded with lossless, professional, and
voice format.
Playing JPEG files WMA files which are not based upon Windows
This unit can play back JPEG files with the extension Media Audio.
code <.jpg>, or <.jpeg>. WMA files copy-protected with DRM.
This unit can play back JPEG files that are at 32 x 32 to This unit can display the jacket picture meeting the
8 192 x 7 680 resolution. conditions below:
It may take time to display the file depending on its Picture size: 32 x 32 to 1 232 x 672 resolution
resolution. Data size: less than 650 KB.
This unit can play back baseline JPEG files. File type: JPEG
Progressive JPEG files or lossless JPEG files cannot be
played.

We bear no responsibility for any loss of data


in an iPod/iPhone and USB mass storage
class device while using this unit.

66
Downloaded from www.Manualslib.com manuals search engine
Sound signals emitted through the rear terminals
Through the analog terminals (Speaker out/REAR OUT/FRONT OUT)

ENGLISH
2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed.

Language codes (for DVD/DVD-VR/DivX language selection)


Code Language Code Language Code Language Code Language
AA Afar GL Galician MI Maori SO Somali
AB Abkhazian GN Guarani MK Macedonian SQ Albanian
AF Afrikaans GU Gujarati ML Malayalam SR Serbian
AM Ameharic HA Hausa MN Mongolian SS Siswati
AR Arabic HI Hindi MO Moldavian ST Sesotho
AS Assamese HR Croatian MR Marathi SU Sundanese
AY Aymara HU Hungarian MS Malay (MAY) SW Swahili
AZ Azerbaijani HY Armenian MT Maltese TA Tamil
BA Bashkir IA Interlingua MY Burmese TE Telugu
BE Byelorussian IE Interlingue NA Nauru TG Tajik
BG Bulgarian IK Inupiak NE Nepali TH Thai
BH Bihari IN Indonesian NO Norwegian TI Tigrinya
BI Bislama IS Icelandic OC Occitan TK Turkmen
BN Bengali, Bangla IW Hebrew OM (Afan) Oromo TL Tagalog
BO Tibetan JA Japanese OR Oriya TN Setswana
BR Breton JI Yiddish PA Panjabi TO Tonga
CA Catalan JW Javanese PL Polish TR Turkish
CO Corsican KA Georgian PS Pashto, Pushto TS Tsonga
CS Czech KK Kazakh QU Quechua TT Tatar
CY Welsh KL Greenlandic RM Rhaeto-Romance TW Twi
DZ Bhutani KM Cambodian RN Kirundi UK Ukrainian
EL Greek KN Kannada RO Rumanian UR Urdu
EO Esperanto KO Korean (KOR) RW Kinyarwanda UZ Uzbek
ET Estonian KS Kashmiri SA Sanskrit VI Vietnamese
EU Basque KU Kurdish SD Sindhi VO Volapuk
FA Persian KY Kirghiz SG Sangho WO Wolof
FI Finnish LA Latin SH Serbo-Croatian XH Xhosa
FJ Fiji LN Lingala SI Singhalese YO Yoruba
FO Faroese LO Laothian SK Slovak ZU Zulu
FY Frisian LT Lithuanian SL Slovenian
GA Irish LV Latvian, Lettish SM Samoan
GD Scots Gaelic MG Malagasy SN Shona

67
Downloaded from www.Manualslib.com manuals search engine
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
DVD Logo is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other
ENGLISH
countries.
Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Made for iPod, and Made for iPhone mean that an electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other
countries.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Font for this product is designed by Ricoh.
Only for KW-ADV64BT/KW-AV68BT/KW-AV60BT
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
JVCKENWOODCorporation is under license. Other trademarks and trade names are those of their respective owners.
Only for KW-ADV64BT/KW-AV60BT/KW-AV60:
Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora
Media, Inc., used with permission.
Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved.
DivX, DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used
under license.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is
an official DivX Certified device that plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX
Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete your registration.

SAFETY INSTRUCTIONS
Use of the iPhone Navigation App is only permitted if the traffic conditions are suitable and you are absolutely
sure that no risk, obstruction or injury will be incurred to you, your passengers or other road users. The
requirements of the Road Traffic Regulations must always be followed and may vary by state. The destination
must not be entered while the vehicle is in motion.
iPhone Navigation guidance may not be applicable to the current situation because of changes in traffic
conditions (e.g. changes in tollroads, principal roads, one-way traffic, or other traffic regulations). In this case,
observe the current traffic signs or regulations.
Traffic signs should be observed carefully while driving using the iPhone Navigation App. iPhone Navigation
App is only an aid. Driver must always decide whether or not to heed the information provided. We do not
accept liability for erroneous data provided by the iPhone Navigation App.
Do not operate the unit while driving.

68
Downloaded from www.Manualslib.com manuals search engine
Troubleshooting

ENGLISH
What appears to be trouble is not always serious. Check the following points before calling a service center.
For operations with the external components, refer also to the instructions supplied with the adapters used for the
connections (as well as the instructions supplied with the external components).
Messages (enclosed in ) in the tables below are shown in the language selected on <Language> (page 48).

If the following messages appear


Message Remedy/Cause
No Signal Start the playback on the external component connected to VIDEO IN jack.
Check the cords and connections.
Signal input is too weak.
MISWIRING Check wiring A speaker cord has shorted or it has come in to contact with the car chassis.
connection then reset unit Wire or insulate the speaker cord as appropriate, then reset the unit
WARNING Check wiring (page3). See also the Installation/Connection Manual.
connection then reset unit
Parking Brake No playback picture is shown when the parking brake is not engaged.
Eject Error / Loading Error Eject the disc forcibly. ( page 3)
Restricted Device Check whether the connected iPod/iPhone is compatible with this unit. (
page 26)
USB Device Error The USB power voltage is abnormal.
Turn off and turn on the unit.
Connect another USB device.
No BT Dongle* Bluetooth adapter (KS-UBT1) is removed.
Connection Error* The device is registered but the connection has failed. Connect the registered
device. ( page 53)
Please Wait...* The unit is preparing to use the Bluetooth function. If the message does not
disappear, turn off and turn on the unit, then connect the device again (or reset
the unit).
No Voice Device* The connected mobile phone does not have the voice recognition system.
No Data* No phone book data is contained in the connected Bluetooth phone.
Initialize Error* The unit has failed to initialize the Bluetooth module. Try the operation again.
Dial Error* Dialing has failed. Try the operation again.
Hung Up Error* The call has not ended yet. Park your car, and use the connected mobile phone
to end the call.
Pick Up Error* The unit has failed to receive a call.
Pairing Error* Pairing between the unit and Bluetooth device has failed. Register the device
again. ( page 52)
* Only for KW-ADV64BT/KW-AV68BT/KW-AV60BT.

69
Downloaded from www.Manualslib.com manuals search engine
If there seems to be a problem
Symptom Remedy/Cause
ENGLISH

No sound comes out of the speakers. Adjust the volume to the optimum level.
Check the cords and connections.
No picture is displayed on the screen. Turn on the screen. ( page 9)
General

The unit does not work at all. Reset the unit. ( page3)
The remote controller*1 does not work. Replace the battery.
Desired source button (Bluetooth*2, Select appropriate setting for <AV Input>. ( page 47)
AV-IN, or Apps) is not displayed on
<AV Menu> screen.
SSM automatic presetting does not work. Store stations manually. ( page 15)
TUNER

Static noise while listening to the radio. Connect the antenna firmly.
Disc can be neither recognized nor played Eject the disc forcibly. ( page 3)
back.
Disc cannot be ejected. Unlock the disc. ( page 17)
Disc in general

Recordable/Rewritable discs cannot be Insert a finalized disc.


played back. Finalize the discs with the component which you used
Tracks on the Recordable/Rewritable discs for recording.
cannot be skipped.
Playback does not start. The format of files is not supported by the unit.
No picture appears on the external monitor. Connect the video cord correctly.
Select the correct input on the external monitor.
Disc cannot be played back. Record the tracks using a compliant application on the
JPEG/MP3/WMA/WAV
DivX/MPEG1/MPEG2/

appropriate discs. ( page 18)


Add appropriate extension codes to the file names.

Tracks are not played back as you have Playback order may differ from the one played back using
intended them to play. other players.

Now Reading... keeps flashing on the Turn off the power and on again.
screen.
USB

While playing a track, sound is sometimes The tracks are not properly copied into the USB device.
interrupted. Copy tracks again, and try again.

*1 For KW-AV60BT/KW-AV60: Purchase RM-RK252P separately.


*2 Only for KW-AV60.

70
Downloaded from www.Manualslib.com manuals search engine
Symptom Remedy/Cause
No sound comes out of the speakers. Disconnect the iPod, then connect it again.

ENGLISH
Select another source, then reselect iPod.
The iPod/iPhone does not turn on or does Check the connecting cable and its connection.
not work. Update the firmware version.
Charge the battery.
Check whether the iPod control mode is correctly
selected. ( page 27)
Reset the iPod/iPhone.
iPod/iPhone

Sound is distorted. Deactivate the equalizer either on this unit or the iPod/
iPhone.
A lot of noise is generated. Turn off (uncheck) VoiceOver of the iPod. For details, visit
<http://www.apple.com>.
No operations are available when playing Operate the unit after the Artwork is loaded. ( page 28)
back a track containing Artwork.
Sound does not synchronize with the video. Select <iPod> for <AV Input>. ( page 47)
Videos cannot be played. Connect with USB Audio and Video cable JVC KS-U30.
No sound of videos come out. Other cables cannot be used.
Select <iPod> for <AV Input>. ( page 47)
No picture appears on the screen. Turn on the video component if it is not on.
AV-IN

Connect the video component correctly.

71
Downloaded from www.Manualslib.com manuals search engine
Symptom Remedy/Cause
No Signal appears on the screen. Make sure the SiriusXM radio antenna is mounted outside
ENGLISH
the vehicle. Move vehicle to an area with a clear view of
SiriusXM radio (only for KW-ADV64BT/KW-AV60BT/KW-AV60) the sky.
Check Antenna appears on the screen. Check the SiriusXM radio antenna connection and make
sure it is firmly attached to the tuner.
Check the SiriusXM radio antenna cable to see whether
it is bent or broken. If the antenna cable is damaged,
replace it.
Check Tuner appears on the screen. The communication is disconnected or an error occurs.
Wait for a while.
Chan Unavailable appears on the screen Selected channel is no longer available or is unauthorized.
for about 2 seconds, then returns to the Select another channel or continue listening to the
previous channel. previous channel.
"Ch Unsubscribed" appears on the screen. Selected channel is not part of your current subscription
plan. Call 1-866-635-2349 to subscribe.
Subscription Updated appears on the Your subscription is updated. Press the appropriate button
screen. to continue.
Channel Locked appears on the screen. The selected channel has been locked by the parental
controls, or a mature channel has been selected. Enter
unlock code after you are asked. ( page 38)

72
Downloaded from www.Manualslib.com manuals search engine
Symptom Remedy/Cause
Phone sound quality is poor. Reduce the distance between the unit and the

ENGLISH
Bluetooth mobile phone.
Move the car to place where you can get a better signal
reception.
The sound is interrupted or skipped while Reduce the distance between the unit and the
Bluetooth (only for KW-ADV64BT/KW-AV68BT/KW-AV60BT )

using a Bluetooth audio player. Bluetooth audio player.


Disconnect the device connected for Bluetooth phone.
Turn off, then turn on the unit.
(When the sound is not yet restored) connect the player
again.
The connected audio player cannot be Check whether the connected audio player supports AVRCP
controlled. (Audio Video Remote Control Profile).
Bluetooth device does not detect the unit. Check whether the Bluetooth adapter (KS-UBT1) is
inserted correctly.
Search from the Bluetooth device again.
When Waiting for connection... appears on the screen,
press [Cancel] then connect a Bluetooth device.
The unit does not make pairing with the Enter the same PIN code for both the unit and target
Bluetooth device. device. If the PIN code of the device is not indicated on its
instructions, try 0000 or 1234.
Echo or noise occurs. Adjust the microphone unit position.
Make sure that NR/EC (Noise reduction/Echo cancel)
function is activated. ( page 55)
The unit does not respond when you try to You may have tried to copy the same entries (as stored)
copy the phone book to the unit. to the unit.

73
Downloaded from www.Manualslib.com manuals search engine
ENGLISH
Specifications
Power Output 20 W RMS 4 Channels at 4
and 1% THD+N
Signal-to-Noise Ratio 80 dBA (reference: 1 W into 4 )

Load Impedance 4 (4 to 8 allowance)


Equalizer Control Range Frequencies Low: 60Hz, 80Hz, 100Hz, 150Hz
Mid: 500Hz, 1kHz, 1.5kHz, 2kHz
AMPLIFIER

High: 10kHz, 12.5kHz, 15kHz, 17.5kHz


Level 10 dB
Audio Output Level Line-Out Level/Impedance 4 V/20 k load (full scale)
LINE OUT (FRONT/REAR), Output Impedance 1 k
SUBWOOFER
Other Terminals Input LINE IN, VIDEO IN, CAMERA IN, USB input, MIC
IN*1, AUX, Antenna input
Others Expansion port (SXi)*2, OE REMOTE
Frequency Range FM with channel interval set 87.9 MHz to 107.9 MHz
to 200 kHz
with channel interval set 87.5 MHz to 108.0 MHz
to 50 kHz
AM 530 kHz to 1 700 kHz
FM/AM TUNER

FM Tuner Usable Sensitivity 9.3 dBf (0.8 V/75 )


50 dB Quieting Sensitivity 16.3 dBf (1.8 V/75 )
Alternate Channel Selectivity 65 dB
(400 kHz)
Frequency Response 40 Hz to 15 000 Hz
Stereo Separation 40 dB
AM Tuner Sensitivity/Selectivity 20 V/40 dB
Signal Detection System Non-contact optical pickup (semiconductor laser)
Frequency Response DVD, fs=48 kHz/96 kHz 16 Hz to 22 000 Hz
VCD/CD 16 Hz to 20 000 Hz
DVD/CD

Dynamic Range 93 dB
Signal-to-Noise Ratio 95 dB
Wow and Flutter Less than measurable limit
Color System NTSC/PAL
Video-Out (composite) 1 Vp-p/75
*1 Only for KW-ADV64BT/KW-AV68BT/KW-AV60BT.
*2 Only for KW-ADV64BT/KW-AV60BT/KW-AV60.

74
Downloaded from www.Manualslib.com manuals search engine
USB Standards USB 2.0 Full Speed
Data Transfer Rate Full Speed Maximum 12 Mbps

ENGLISH
USB Low Speed Maximum 1.5 Mbps
Compatible Device Mass storage class
Compatible File System FAT 32/16/12
Max. Current DC 5 V 1 A
Version Bluetooth 2.0 certified
Output Power +4 dBm Max. (Power class 2)
BLUETOOTH*

Service Area Within 10 m (10.9 yd)


Profile HFP (Hands-Free Profile) 1.5
OPP (Object Push Profile) 1.1
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio/Video Remote Control Profile) 1.3
PBAP (Phone Book Access Profile) 1.0
Screen Size 6.1 inch wide liquid crystal display
Number of Pixel 1 152 000 pixels: 800 (horizontal) 3 (RGB) 480 (vertical)
MONITOR

Drive Method TFT (Thin Film Transistor) active matrix format


Color System NTSC/PAL
Aspect Ratio 16:9 (wide)
Power Requirement Operating Voltage DC 14.4 V (11 V to 16 V allowance)
Grounding System Negative ground
Allowable Storage Temperature 10C to +60C (14F to 140F)
Allowable Operating Temperature 0C to +40C (32F to 104F)
GENERAL

Dimensions (W H D) Installation Size (approx.) 182 mm 111 mm 160 mm


(7-3/16 4-3/8 6-5/16)
Panel Size (approx.) 188 mm 117 mm 10 mm
(7-7/16 4-5/8 7/16)
Mass (approx.) 2.3 kg (5.1 lbs) (including the Trim plate and
Sleeve)
* Only for KW-ADV64BT/KW-AV68BT/KW-AV60BT.

Design and specifications are subject to change without notice.

If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.

75
Downloaded from www.Manualslib.com manuals search engine
7 The countries where you may use the
Bluetooth function (For KS-UBT1)
7 Die Lnder, in denen Sie die Bluetooth Funktion verwenden knnen
7 Pays o vous pouvez utiliser la fonction Bluetooth
7 De landen waar u de Bluetooth-functie mag gebruiken
7 Pases en los que se puede utilizar la funcin Bluetooth
7 Paesi nei quali possibile utilizzare la funzione Bluetooth
7 Lnder dr du kan anvnda Bluetooth-funktionen
7 Lande, hvor du kan bruge Bluetooth-funktionen
7 Land hvor du kan bruke Bluetooth-funksjonen
7 Maat, joissa voi kytt Bluetooth-toimintoa
7 Pases onde pode usar a funo Bluetooth
7 Pases onde voc pode usar a funo Bluetooth
7 Bluetooth
7 , Bluetooth
7 Zem, ve kterch mete vyuvat funkci Bluetooth
7 Azok az orszgok, amelyekben hasznlhatjuk a Bluetooth-funkcit
7 Kraje, w ktrych mona uywa funkcji Bluetooth
7 Drave, kjer lahko uporabljate funkcijo Bluetooth
7 Krajiny, v ktorch mete vyuva funkciu Bluetooth
7 Valstis, kur js varat izmantot Bluetooth funkciju
7 alys, kuriose galite naudotis Bluetooth funkcija
7 Il-pajjii fejn tista tua l-funzjoni Bluetooth
7 Lnd ar sem hgt er a nota Bluetooth
7 Riigid, kus on vimalik kasutada Bluetooth funktsiooni
7 Bluetooth fonksiyonunu kullanabileceiniz lkeler
7
7 Na tortha inar fidir leat feidhmi Bluetooth a sid
7 Lnner an denen der dBluetooth Funktioun benotze knnt.
7 nhng quc gia m bn c th s dng chc nng Bluetooth
7 Els pasos on podr fer servir la funci Bluetooth
7 Zemlje u kojima je dozvoljena upotreba Bluetooth funkcije.
7 Zemlje u kojima moete koristiti Bluetooth funkciju
7 Zemlje u kojima je doputeno koristiti Bluetooth.
7 Bluetooth
7 , Bluetooth
7 rile n care putei utiliza funcia Bluetooth
7 Die lande waar u die Bluetooth-funksie kan gebruik
7 Amazwe lapho ungasebenzisa khona uhlelo lwe-Bluetooth
7 Ang mga bansa kung saan maaari kang gumamit ng Bluetooth function
7 Negara-negara yang memperbolehkan penggunaan fungsi Bluetooth
7 Negara-negara yang anda boleh menggunakan fungsi Bluetooth
7 ] %OXHWRRWKp [- `
7 Bluetooth
7 Bluetooth
7 Bluetooth
7

i
Downloaded from www.Manualslib.com manuals search engine
Country Country Country
Andorra Ireland Sverige
ire ] %OXHWRRWKp [
- `
Singapore
Australia India
Singapura
sterreich
sland Slovenija
Bosna i Hercegovina
Italia Slovensko
Belgien
Belgique
Lichtenstein Trkiye
Brasil Lietuva
Canada Luxemburg United States of America
Luxembourg
Schweiz Venezuela
Ltzebuerg
Suisse Vietnam
Latvija
Chile Vit Nam
Monaco
South Africa
Kbrs Crna Gora ENingizimu Afrika
esk republika Suid-Afrika
Deutschland Malta
Danmark Malaysia
Eesti Nederland
Espaa Norge
Suomi New Zealand
Finland Per
France Philippines
United Kingdom Pilipinas
Polska
Hong Kong Portugal
Repblica Oriental del
Uruguay
Hrvatska Romnia
Magyarorszg Srbija
Indonesia

11-1672-007
ii
Downloaded from www.Manualslib.com manuals search engine
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Still having trouble??
USA ONLY

Call 1-800-252-5722
http://www.jvc.com
We can help you!

EN, SP, FR
2011 JVC KENWOOD Corporation 1211EHHMDWJEIN

Downloaded from www.Manualslib.com manuals search engine


KW-ADV64BT/KW-AV68BT/KW-AV60BT/KW-AV60
.JVC
~
Installation/Connection Manual
Manual de instalacion/conexion

~
Manuel d'installation/raccordement
L VT2293-002A 1211 EHHMDWJEIN
[J/JW] EN, SP, FR
2011 JVC KENWOOD Corporation
ENGLISH ESPANOL FRAN~AIS

This unit is designed to operate on 12 V DC, NEGATIVE ground Esta unidad esta diseliada para funcionar con 12 V de CC, con Cet appareil est conru pour fonctionner sur des sources de courant
electrical systems. If your vehicle does not have this system, a sistemas eh!ctricos de masa NEGATlVA. Si su vehiculo no posee continu de 12 V a masse NEGATIVE. Si votre vthicule n'offre pas ce
voltage inverter is required, which can be purchased at JVC car audio este sistema, sera necesario un inversor de tensiOn, que puede ser type d'alimentation, il vous Jaut un convertisseur de tension, que vous
dealers. adquirido en los concesionarios de JVC de equipos de audio para pouvez acheter chez un revendeur d'autoradios }VC.
autom6viles.

WARNINGS ADVERTENCIAS AVERTISSEMENTS


DO NOT install any unit or wire any cable in a location where; NO in stale ningUn receptor o tienda ningUn cable en una N'INSTALLEZ aucun appareil ni aucun cdble dans un endroit oU:
- it may obstruct the steering wheel and gearshift lever operations, ubicaci6n donde; - oU il peut gener l'acces au volant ou au levier de vitesse car cela
as this may result in a traffic accident. - donde pueda obstruir Ia maniobra d el volante de direcci6n peut entrairter un accident de Ia circulation.
- it may obstruct the operation of safety devices such as air bags, as y d el cambia de engranajes, con el consiguiente riesgo de - oU il peut gener la manipulation de dispositifs de securite tels que
this may result in a fatal accident. accidentes d e trafico. les airbags car cela peut entrainer un accident fatal.
- it may obstruct visibility. - don de pueda obstruir el funcionamiento de dispositivos de - oU il peut gener Ia visibilite.
DO NOT operate any unit while manipulating the steering wheel, as seguridad tales como balsas de aire, pues podrfa resultar en un NE COMMA NDEZ PAS l'appareil lors de la manipulation du volant
this may result in a traffic accident. accidente fatal. car cela peut en trainer un accident de la circulation.
The driver must not watch the monitor while driving. It may lead to - donde pueda obstruir Ia visibilidad. Le conducteur ne doit pas regarder le moniteur lorsqu'il conduit. Cela
carelessness and cause an accident. NO opere Ia unidad mientras esta maniobrando el volante de peut lui fa ire perdre sa concentration et causer un accident.
If you need to operate the unit while driving, be sure to look around direcci6n, pues podria producirse un accidente de t rafico. Si vous souhaitez operer l'appareil pendant que vous conduisez,
carefully or you may be involved in a traffic accident. El conductor no debe mirar el monitor mientras conduce. Podrfa assurez -vous de bien regarder autour de vous afin de ne pas causer un
If the parking brake is not engaged, "Parking Brake" appears on the producirse un descuido, y causar un accidente. accident de Ia circulation.
monitor, and no playback picture will be shown. Si necesita operar Ia unidad mientras conduce, asegUrese de Si le frein amain n'est pas engage. "Parking Brake (Frein aMa in}"
- This warning appears only when the parking brake lead is mirar atentament e a su alrededor pues de lo contrario, se pod ria s'affiche sur le moniteur et aucune image de lecture n'apparait.
connected to the parking brake system built in the car. producir un accidente de trafico. - Cet avertissement apparait uniquement quand le fil du frein de
Si el frena de mana no esta en usa, aparecera "Parking Brake stationnement est connect au systeme de jrein de stationnement
To prevent short circuits, we recommend that you disconnect the
(Freno de Mana)" en Ia pantalla y nose mostrara n inguna integre aIa voiture.
battery's negative terminal and make all electrical connections before
secuencia de imagen.
installing the unit. Pour eviler tout court-circuit, no us vous recommandons de debrancher
- Esta advertencia aparece Unicamente cuando el cable del frena
Be sure to ground this unit to the car's chassis again after la borne nCgative de Ia batterie et d'effectuer to us les raccordements
de estacionamiento se encuentra conectado al sistema del
installation. e/ectriques avant d'imtaller l'appareil.
frena de estacionamiento incorporado al autom6vil.
Be sure any cable is not caught on the car's chassis or under seats. Assurez-vous de raccorder de nouveau Ia mise a Ia masse de
Para evitar cortocircuitos, recomendamos que desconect e el cet appareil au chissis de Ia voiture a pres l' installation.
Notes on electrical connections: terminal negat ive de Ia bateria y que efectUe todas las conexi ones Assurez-vous qu'aucun cdble n'est coind sur chtissis de la voiture ou
Replace the fuse with one of the specified rating. If the fuse blows ehktricas antes de instalar Ia unidad. sous les siCges.
frequently, consult your JVC car audio dealer. AsegUrese de volver a conectar amasa esta unidad al chasis
It is recommended to connect speakers with maximum power Remarques sur les connexions electriques:
delautomovil despues de Ia instalacicln.
of more than 50 W (both at the rear and at the front, with an Rem placer le fusible par un de la valeur pricisie. Si le fusible saute
AsegUrese de que ningUn cable quede atrapado en el chasis del
impedance of 4 n to 8 Cl). souvetzt. consulter votre revendeur d 'autoradios ]VC.
autom6vil o debajo de los asientos.
To prevent short circuits, cover the terminals of the UNUSED leads Il est recommande de connecter des enceintes avec une puissance de
with insulating tape.
Notas sobre las conexiones electricas: plus de SOW (les enceintes arritre et les enceintes avant, avec une
Reemplace el fusible per otro del regimen especificado. Si el impedance comprise entre 4 0 et 8 OJ.
The heat sink becomes very hot after use. Be careful not to touch it
fusible se fun de frecuentemente, con suite con su concesionario Pour fviter les court-circuits, couvrir les barnes des fils qui ne sont
when removing this unit.
de JVC de equipos de audio para autom6viles. PAS UTILIS"fs avec de Ia bande isolante.
At the time of installation, be sure to fix all wires (wires both from
Se recomienda conectar los altavoces con una potencia maxima Le dissipateur de chaleur devient tres chaud apres usage. Faire
this unit and from the car itself) in a way that no wires can come
d e m as d e SOW (tanto atras como adelante, con una impedancia attention de ne pas lc toucher en retirant cet appareil.
into contact with heat sinks on the rear and side of the unit.
de 4 n a 8 Cl). Au moment de /'installation, assttrez-vous de fixer taus les fils (les fils
Para evitar cortocircuitos, cubra los cables NO UTILIZADOS con de cet appareil et aussi de la voiture elle-mtrne) defa~on qu'aucun
cinta aislante. fil ne puisse entrer en contact avec les dissipateurs de chaleur situes a
El sumidero tt?rmico estara muy caliente desput?s del usa. l'arritre et sur le cOte de l'appareil.
AsegUrese de no toeario al desmontar esta unidad.
AI realizar Ia instalaci6n, asegurese de fijar todos los cables (tanto
los que proceden de esta unidad como los del vehiculo en sO de
manera tal que ninguno quede en contacto con los disipadores
termicos de las partes t raseras y laterales de Ia unidad.

Parts list for installation and connection Lista de piezas para instalacion y conexion Liste des pieces pour !'installation et
The following parts are provided for this unit. Con esta unidad se sum inistran las siguientes piezas. raccordement
If anything is missing, contact your dealer immediately. Si hay algUn elemento faltante, p6ngase inmediatamente en Les pitces suivantes sont Journies avec cet appareil.
contacto con su concesio nario. Si quelque chose manquait, contactez votre revendeur imrnfdiatement.

Main unit/Sleeve/Trim plate Monitor panel and soft case Crimp connector
Unidad principai/Cubierta/ Piaca de g uarnici6n Panel del monitory estuche blando Conector de sujeci6n Mounting bolt- M4 x 20 mm/M4 x 13/1 6" Washer (0S)
Appareil principal!Manchon! Plaque d'assemblage Panneau du m onifeur et etui souple a
Raccord sertir Perno de montaje-M4 x 20 mm/M4x 13/16 pulgada Arandela (05)
Boulon de montage- M4 x 20 mm/ M4 x 13/16 pouces Rondelle (05)

Rubber cushion ~ Lock nu[ (MS)


~
~
Cojln de goma Tuerca de seguridad (MS)
Amortis.seur en caoutchouc Ecrou d'arret (M S)

j~.
Only for KW-ADV64BT/ KW-AV68BT Only for KW-ADV64BT/KW-AV68BT/ KW-AV60BT
Solo para KW-ADV64BT/KW-AV68BT Solo para KW-ADV64BT/KW-AV68BT/KW-AV60BT
Powermcd / ManiJas
Handles Umquement pour le KW-ADV64BT/KW-AV68BT Uniquement pour le KW ADV64BT/KW-AV688T/KW-AV60BT
CordOn de alimentaci6n
Poigntes
Cordon d'alimentation Microphone
Remote controller Micr6fono
Cont rol remote Microphone
Ttlecommande
l Flat head screws (MS x 8 mm/MS x 3/8")
~~
Bluetooth adap[er (attached)
Use these screws when installing the unit
: Round head screws (MS x 8 mm/MS x 3/8") RM-RK252 Adaptador Bluet ooth (insertado)
without the supplied sleeve. (See page 2.)
l
: Tornillos de cabeza plana
(MS x 8 mm/MS x 3/8 pulgada)
~~ Utilice estes tornillos cuando instale Ia unidad
Batteries*I KS-UBTl Adaptateur Bluetooth (insere)
Pilas* 1
l Tornillos de cabeza esferica
SPSPSPSP
sin Ia cubierta suministrada. {Consulte Ia
pagina 2.) PUe<" 1 ~
: (MS x 8 mm/ M5 x 3/8 pulgada) Bag for stor ing the adapter
; Vis
i Vis
atete plate (M 5 X 8 mm!M5 X 3/8 pouces)
atete ronde (M5 x 8 mm/ M5 x 3/8 pouces)
SPSPSPSP Utilis.ez ces vis lors de !'installation de l'appareil
sans le manchon fourni. (Voir page 2.) ~
Fund a para guardar el adaptador
Sac pour ranger l'adaptateur

64_B_T_. _ _ _ __ _ _ _ _ _ _ _ __jl j . , S61o para KW-ADV64BT.


A_o _v _
. fo_, _K_w_-_
Lj_,_ o_nicy_ II * 1 Uniquemen t pour le KW-ADV64B.L

Downloaded from www.Manualslib.com manuals search engine


INSTALLATION INSTALACION INSTALLAliON
(IN-DASH MOUNTING) (MONTAJE EN EL TABLERO DE INSTRUMENTOS) (MONTAGE DANS LE TABLEAU DEBORD)
The following illustration shows a typical installation. However, you La siguiente ilustraci6n muestra una instalaci6n tfpica. Sin embargo L'illustration suivante est un exemple d'installation typique.
should make adjustments corresponding to your specific car. If you usted debera efectuar los ajustes correspondientes a su autom6vil. Cependant, vous devez fa ire les ajustements correspondant avotre
have any questions or require information regarding installation kits, Si tiene alguna pregunta o necesita informaci6n acerca de las voiture. Si vous avez des questions ou avez besoin d'information sur des
consult your JVC car audio dealer or a company supplying kits. herramientas para in sta laci6n, consu lte con su concesionario de kits d'installation, consulter votre revendeur d'a utoradios JVC ou une
If you are not sure how to install this unit correctly, have it installed JVC de equipos de audio para autom6viles o a una compalifa que compagnie d'approvisionnement.
by a qualified technician. suministra tales herramientas. Si vous n'i!tes pas sar de pouvoir installer l'appareil correctement,
Before installing the unit Sino esta seguro de poder instalar Ia unidad correctamente, dejela faite-le installer par un technicien qualijie.
Remove the audio system originally installed in the car, together en manes de un tt:~cnico cualificad o. Avant d'lnstaller l'appareil
with its mounting brackets. Be sure to keep all the screws and parts Antes de instalar Ia unidad Retirez le systeme audio d'origine instalte dans la voiture en meme
removed from your car for future use. Desmonte el sistema de audio instalado originalmente en el cache, temps que les supports de montage. Assurez-vous de conserver toutes
When mounting the unit, be sure to use the screws provided, as junto con los mensulas de montaje. AsegUrese de guardar todos los les vis et pieces dl!tachees de votre voiture pour une utilisation dans le
instructed. If other screws are used, parts could become loose or tornillos y piezas quitados de su vehiculo para poderlos usar en el future.
damaged. futuro.
Lars du montage de l'appareil, assurez-vous d'utiliser les vis fournies,
AI instalar Ia unidad, asegUrese de usar los tornillos sum inistrado s,
When tightening screws or bolts, be careful not to pinch any de la faron indiquee. Si vous utilisez d'autres vis, certaines pieces
de acuerdo con las instrucciones. El usa de otros tornillos podra
connectio n cord. peuvent etre perdues ou endommagees.
provocar flojedad de o dalios a las piezas.
Make sure not to block the fan on the rear to maintain proper AI apretar los torni ll os o los pernos, asegUrese de que ningUn Lorsque vous serrez des vis au des boulons, faites attention de ne pas
ventilation when installing the unit. cable de co nexi6n quede pillado. pincer un cordon de connexion.
When installing the unit without using the sleeve AI efectuar Ia instalaci6n, asegUrese de no bloquear el ve ntilador Assurez-vous de ne pas bloquer le ventilateur sur le panneau arrif.re
Use fl at head screws or round head screws, depending on del panel trasero a fin de manten er una ve ntilaci6n co rrecta. lors de !'installation afin de permettre une ventilation correcte.
installation location. When you use flat head screws to install the lnstalaci6n de Ia unidad sin utilizar Ia cubierta Lors de !'installation de l'appareil scans utiliser de
unit, use the screws removed in step l below. When you use screws Uti lice tornillos de cabeza plana o esferica, dependiendo del Iugar man chon
other than those supplied, use 8 mm (3/8")-long screws. If longer de instalaci6n. Si decide ut ilizartornillos de cabeza plana para Utilisez des vis atete plate ou des vis atete ronde, enfonction de
screws are used, they could damage the unit. in sta lar Ia unidad, utilice los extrafdos en el paso 1, mas abajo. l'emplacement de !'installation. Quand vous utilisez des vis atete
Tighten the screws firmly to prevent the unit from falling off. Si decide utilizar t o rnillos distintos de los sumini st rados, escoja
plage pour installer l'appareil, utilisez les vis retirees d l'etape I ci-
tornillos de 8 mm (3/8") de largo. El uso de tornillos mas largos
dessous. Quand vous utilisez d'autres vis que les vis fournies, utilisez
produc ir dalios a Ia unidad.
des vis d'une longueur de 8 mm (318"). Vous risquez d'endommager
Apriete los t orn illos firmemente para evitar que Ia unidad se
l'appareil si vous utilisez des vis plus longues.
caiga.
Serrez les vis solidernent pour Cviter que l'appareil tombe.

7 Detach the trim plate and remove the screws. l Oesmon te Ia placa de guarnici6n y extraiga los tornillos. 7 Detachez Ia plaque d'assemblage et retirez les vis.
2 Detach the sleeve using the handles then slide off the sleeve. 2 Sujetando las asas, desmonte Ia cubierta deslizandola. 2 Detachez le manchon en utilisant les poignCes puis retirez-le.
J Install the sleeve in the dashboard of the car. J Instate Ia cubierta en el tablero del autom6vi l. 3 Installez le manchon daf!s Ie tableau de bord de la voiture.
4 Do the required electrical connections. 4 Real ice todas las conexi ones etectricas necesarias. 4 RJalisez les connexions electriques.
See pages 3 - 6. Cons ulte la s paginas 3-6. Voir pages 3- 6.
S Attach the trim plate to the main unit, then install the main unit S Fije Ia placa de guarnici6n a Ia unidad princ ipal y, a continuaci6n, S Attachez la plaque de garniture sur l'appareil principale, puis
in to the sleeve. instale esta en Ia cubierta. installez l'appareil dans le manchon.
6 Attach the monitor panel. 6 Fije el panel del monitor. 6 Attachez le panneau du moniteur.

1 When you stand the unit, be careful


not to damage the fuse on the rear.
Sleeve
I ~
Cubierta ----r---L
/ 0 AI poner Ia unidad vertical, tenga
Manchon ~ cuidado de no daflar el fusible
provisto en Ia parte posterior.

/ Lorsque vous mettez l'appareil aIa


Flat head screws (MS x 8 mmiMS x 318") vertica/e,faire attention de ne pas
Tornillos de cabeza plana Trim plate
endommager le fusible situe sur
(MS x 8 mmi MS x 318 pu lgada) Placa de guarnici6n /'arriere.
Vis atete plate (MS X 8 mmiMS X 3/8 pouces) Plaque d'assemblage

3 Sleeve
Cubierta
4 For more stable attachment
Para una fijaci6n mas estable
Pour que Ia fixation soit plus stable

Stay (option) I Soporte (opci6n) I Hauban (en option)


@ Screw {option) I Tornillo (opci6n) I Vis (en option)
Lock nut I Tuerca de seguridad I Ecrou d'arret
~ ~ Washer I Arandela I Rondelle
'~ Mounting bolt I Perno de montaje I Bouton d' montog

Bend the appropriate tabs to hold the sleeve firm ly in place.


To the rear panel
Doble las lengUetas apropiadas para retener firmemente Ia manga en su Iugar.
AI panel trasero
Tordez les languettes appropriees pour maintenir le mat1chm1en place. Sur Ie panneau arritre

s 6. r'
Trim plate
Placa de guarnlci6n
Plaque d'assemblage

Monitor panel
Slide the unit in until you hear a clicking sound.
No tape las rejillas de venti1aci6n. Panel del monitor
Deslice Ia unidad hasta escuchar un chasquido. Panneau du moniteur
Ne bloquez pas /e ventilateur.
Faites glisser l'appareil jusqu'd ce que vous entendiez un die.

Install the unit at an angle ofless


than 30 ".
DO NOT press the panel (shaded in the illustration). lnstale Ia unidad a un angulo de
NO presione e l panel {sombreado en Ia ilustraci6n). menos de 30,
NE POUSSEZ PAS sur le panneau (en gris sur /'illustration). Installez l'appareil avec un angle de
moins de 30.

Downloaded from www.Manualslib.com manuals search engine


Removing the unit Extracci6n de Ia unidad Retrait de l'appareil
Before removing the unit, release the rear section. Antes de extraer Ia unidad, libere Ia secci6n trasera. Avant de retirer l'appareil, Uberer la section arritre.

Detach the monitor panel (see


~.
'l j Detach the trim plate,
Desmonte Ia placa de
'j ~ Insert the two handles, then pull them as
~l.<;..;;;,,:.J illustrated so that the unit can be removed.
page 5 of the INSTRUCTIONS),
Desmonte el panel del monitor guarnici6n. lnserte las dos manijas y, a continuac i6n,
(consulte Ia pagina 5 del Detachez Ia plaque jalelas tal como se muestra en Ia ilustraci6n
MANUAL DE INSTRUCCIONES), d'assemblage. para desmontar Ia unidad.
Dttachez le pannea u du moniteur lnserez les deux poigntes, puis tirez de Ia
(voir Ia page 5 du MANUEL Trim plate fafOn illustrJe de fafOn Q retirer J'appareil. Manijas
Placa de guarnici6n Poignt!es
D'INSTRUCTIONS).
Plaque d'assemblage

ELECTRICAL CONNECTIONS CONEXIONES ELECTRICAS RACCORDEMENTS ELECTRIQUES


PRECAUTIONS on power supply and speaker connections: PRECAUCIONES sobre las conexiones de Ia fuente de PRECAUTIONS sur !'alimentation et Ia connexlon des
DO NOT connect the speaker leads of the power cord to the alimentaci6n y de los altavoces: enceintes:
car battery; otherwise, the unit will be seriously damaged. NO conecte los conductores de altavoz del cable de NE CONNECTEZ PAS les fils d'enceintes du cordon
BEFORE connecting the speaker leads of the power cord to the alimentacl6n ala baterfa de autom6vil, pues podrian producirse d'alimentation i Ia batterie; sinon, l'apparell serait
speakers, check the speaker wiring in your car. graves dalios en Ia unidad. serieusement endommage.
ANTES de conectar a los altav oces los conductores d e altavoz del AVANT de connecter les fils d'encein tes du cordon d'alimentation
cable de alime ntaci6n, v erifique el conex ionado de altavoz de su aux enceintes, verifiez le cdblage des enceintes de votre voiture.
autom6viL

Connecting the parking brake lead I Conexi on del cable del freno de estacionamiento I Connexion du fil de frein de stationnement

Extension lead Parking brake lead (light green)


Cable prolongador Cable del freno de estacio namiento (verde clara}
Fil prolongateur Fif du frein de stationnement (vert clair)

Crimp connector
Conect or de sujec i6n
Raccord asertir KW-ADV64BT/KW-AV68BT

l To metallic body or chassis of the car


A un cuerpo met.3 1ico o chasis del autom6vil
KW-AV60BT/KW-AV60

Vers corps mt!tallique ou chdssis de Ia voiture

Connecting the reverse gear signal lead (for rear view camera) I Conexion del cable de seiial del engranaje de marcha atras (para camara de retrovision) I
Connexion du fil de signal de marc he arriere (pour Ia camera de recul)
Locate the reverse lamp lead in the trunk. Local ice el conductor de Ia luz de marcha atras en e l Localisez Je fil des feux de recu l dans le coffre.
p o rtaequipajes.

l
Extension lead (not supplied for this un it)
Cab le pro longador (no sumin istrado con esta unidad)
Purple with white stripe Fil prolongateur (nonfourn.i avec cet auto radio)

+ + _..,.;;L____________
PUrpura con rayas blancas
Violet avec ban.de blanche Crim p connector (not supplied for this unit)
IR'&VeEARRSEj Conector de SUJeC16n (no sum1n1 strado con esta umdad)
~ U!llli&J Raccord asertir (non fourn.i avec cet autoradio) Reverse lamps
luz de ma rcha atrils

---~=<~
~ To reverse lamp
A Ia luzde marcha atras
Feux de recul

KW-ADV64BT/KW-AV68BT ,.-------./~ Auxfeux de recul


KW-AV60BT/KW-AV60 Reverse lamp lead ~
Cond uctor de la luz de ~~
marcha atrils ~
Fildes feux de recul Q"" -

Downloaded from www.Manualslib.com manuals search engine


ENGLISH ESPANOL FRANc;:AIS
Before connecting: Check the wiring in the vehicle carefully. Antes de Ia conexi6n: Verifique atentamente el conexionado del Avant de commencer Ia connexlon: Vtrifiez attentivement le
Incorrect connection may cause serious damage to this unit. vehfculo. Una conexi6n incorrecta podrfa producir darios graves en ctiblage du vihicule. Une connexion incorrecte peut endommager
The leads of the power cord and those of the connector from the car Ia unidad. strieusement l'appareil.
body may be different in color. Los cordones del cable de alimentaci6n y los del conector Le fil du cordon d'alimentation et ceux des connecteurs du chtissis de
procedentes de Ia carroceria del autom6vil podrian ser de Ia voiture peuvent etre dif!Jrents en couleur.
1 Connect the colored leads of the power cord in the order specified diferentes en color.
in the illustration below. Connectez les fils co/oris du cordon d'alimentation dans l'ordre
Conecte los conductores de color del cable de alimentaci6n en el
2 Connect the antenna cord.
orden especificado en Ia ilustraci6n de abajo.
sp&ifli sur !'illustration ci-dessous.
J Finally connect the wiring harness to the unit.
2 Conecte el cable de antena. 2 Connectez le cordon d'antenne.

J Por ultimo, conecte el cable de alimentaci6n a Ia unidad. J Finalement, connectez le faisceau de fils al'appareil.
The terminals and cables of all models are shown in the illustration Los terminales y cables de todos los modelos se muestran en Ia Les prises et les ctibles de tousles modeles sont montris sur les
for the purpose of explanation. ilustraci6n con fines explicativos. illustrations dans un but explicatif.

Light green
/'
Verdeclaro
Vert clair
r--------------- To parking brake (see page 3)
AI freno de estacionamiento (consulte Ia pilgina 3)
Au frein de stationnement (voir page 3)
(see page 3/ consulte Ia pilgina 3 I voir page 3)

See each diagram on pages 4 - 6.


Vea cad a uno de los diagramas en las p3ginas 4 - 6.
a
Rtjerez-vous chaque diagram me des pages 4 - 6.

10 A fuse I Fusib le de 10 A I Fusible 10 A


Antenna
terminal
Terminal de .........................................................................1.\.........: Ignition switch
Ia antena
Interrupter de encendido

1
Borne de
l'anterme lnterrupteur d'aflumage

Rear ground terminaJ


~======::::::~
(GND)
I. bodyorchassaso
Tometalac . fht ecar
G) A un cuerpo metillico o chasis del autom6vil +
Vers corps mttalliqu.e ou chdssis de Ia voitu.re
~*4 f' i! :

:
~
2 Terminal de tierra posterior Yellow *5 To a hve termmal tn the fuse block connecung to the car battery :

}r
Borne arriire de masse Amarillo *5 (bypassmg the agmtlon swatch) (constant 12 V) }
{t1\ A un term mal actiVO del bloque de fus1bles conectado a Ja batena del ,?"
:::==:===B=A=IT=>
( )
\f) autom6v1l (desv1ando el mterruptor de encend1do) (12 V constantes)
A une borne so us tensiOn du porte-jus1ble connectee a Ia batter~e de Ia vo1ture (en
denvant l'mterrupteur d'allumage) (12 v constant)
Rojo
m To an accessory terminal in the fuse block
r-c================ (ACC)
\2) A un terminal accesorio del bloque de fusib les
Vers borne accessoire du porte-fusible
Blue
~~e~ To automatic antenna if any (250 rnA max.) Porte-fusible
11~=============:::::::=:::=::? @ A Ia antena automatica, si hubiere (250 mA max.)
(ANT. CONT) A l'antenne automatique s'il yen a une (250 mA max.)

Blue with white stripe


Azul con rayas blancas
B/eu avec bande blanche r2\ To the remote lead of other equipment (200 rnA max.)
!~=================> ~ AI conductor remoto del otro equipo (200 mA max.)
(P. CONT) Au fil de telecommande d'un autre appareil (200 mA max.)
Orange with white stripe
Naranja con rayas blancas
avec bande blanche @
~=================>
(ILLUMI)
6 ToAIA l'interrupteur
car light control switch
interruptordecontrol de las luces del autom6vil
d'&/airage de la voiture
Brown
Marr6n
Marron (j)
II~================::=>
(MUTE)
7 A.ToAI unsistema
mobile phone system
de telefonocelular
systeme de telephone cellulaire
Blue with yellow stripe
Azul con rayas amarillas
To the OE remote adapter *6

I~==========~=
Bleuavec
a AI adaptador para control remota OE *6
Au adaptateur pour telt!commande au volant 6


White with black stripe Gray with black stripe Gray Green with black stripe Green Purple with black stripe Purple
Blanco con rayas negras Gris con rayas negras Gris Verde con rayas negras Verde PUrpura con rayas negras PUrpura
Blanc avec bande noire (-) (+) Blanc Gris avec bande noire (-) (+) Gris Vert avec bande noire (-) (+) Vert Violet avec bande noire Violet

~
left speaker (front)
Altavoz izquierdo (delantero)
Enceinte gauche (avant) ~ Right speaker (front)
Altavoz derecho (delantero)
Enceinte droit (avant) ~ Leftspeaker(rear)
Altavoz izquierdo (trasero)
Enceinte gauche (arriere)
---------------- --- ------------------------------------------------------------------------------------------------------------------
~
Right speaker (rear)
Altavoz derecho (trasero)
Enceinte droit (arriere)

Connecting to the steering wheel remote controller I Conexi6n al control remoto del volante de direcci6n I Connexion de Ia teh~commande
de volant
If your car is equipped with the steering wheel remote control1er, you can operate this unit using the OE remote adapter ~>4,..7
controller. For connection, an exclusive remote adapter (not supplied) which matches your car is Adaptador remoto OE *4 7
required. For details, consult the same car audio dealer as where the unit is purchased. ~ Adaptateurpourtilecommandeau volant''''

~~........ df-- ~
Si su vehfculo esta equipado con control remoto en el volante de direcci6n, podra hacerfuncionar este receptor
utilizando dicho control. Para Ia conexi6n, se requiere un adaptador remoto exclusivo (no suministrado) que sea
adecuado para su autom6vil. Para los detalles, consulte con el concesionario car audio donde compr6 el receptor.
Si votre voiture est munie d'une telicommande de volant, vous pouvez commander eel autoradio en utilisant la
tilecommande. Pour la connexion, un adaptateur de telecommande exclusif (non fourni) correspondant votre voiture a
CONT~ 0 remote:ller~;~
KW-AOV648T/KWAV688T
:ngwheel the car)
Control remoto del volante de direcci6n (equipado
est requis. Pour en savoir plus, consultez le revendeur autoradio aupres duquel vous avez achete cet autoradio. KWAV60BT/KWAV60 en el veh;culol
Telecommande de volant (install& dans Ia voiture)

*2 Only for KW ADV64BT/KW AV68BT/KW -A V60BT. 2 S61o para KWADV64BT/KWAV68BT/KWAV60BT. *2 Uniquement pour le KW-ADV64BT/KW-AV68BT/KW-AV60BT.
*3 Only for KW ADV64BT/KW -AV60BT/KW-A V60. '' S61o para KWADV64BT/KW-AV60BT/KW-AV60. *3 Uniquement pour le KW-ADV64BTJKW-AV68BTJKW-A V60.
Not supplied for this unit. *4 No suminlstrado con esta unidad. *4 Non fourni avec cet appareil.
*S Antes de comprobar el funcionamiento de esta unidad previa a de Ia
*5 Before checking the operation of this unit prior to installation, this lead ,.. 5 Pour verifier le fonctionnement de cet appareil avant installation, ce fil
must be connected, othenvise power cannot be turned on. instalaci6n, es necesario conectar este cable, de lo contrario nose podra
doit erre raccorde, sinon l'appareil ne peut pas tre mis sous tension.
conectar Ia alimentaci6n. No conecte el conductor directamente a Ia baterfa.
Do not connect the lead directly to the battery. Ne connectez pas le fil directement aIa batterie.
~ No conecte el cable a ningUn otro dispositive que no sea el adaptador para
*6 Do not connect the lead to any device other than the OE remote *6 Ne connectez pas ce fila aucun autre appareil que l'adaptateur de
control remota OE. De lo contrario podria provocar un mal funcionamiento.
adapter. Doing so may cause malfunction. telecommande au volant. Cela pourrait causer un mauvais fonctionnemenr.
* 7 Altere el cableado del adaptador para control remote OE para
*7 Alter the wire of the OE remote adapter to connect to the steering wheel *7 Modifiez le fil de l'adaptateur de telecommande au volant pour le
conectar al conductor remote del volante de dlrecci6n.
remote lead. connecte au fil de tCiecommande de volant.
4
Downloaded from www.Manualslib.com manuals search engine
: Connecting the external amplifiers and subwoofer I Conexion de los amplificadores y subwoofer I Connexion d'amplificateurs exterieurs et
d'un caisson de grave
You can connect an amplifier to upgrade your car stereo system. Puede conectar amplificadores para mejorar su sistema car estereo. Vous pouvez connecter un amplificateur pour amtliorer votre systeme
Connect the remote lead (blue with white stripe) to the remote Conecte el conductor re mota (azul con raya s bl ancas) al auto radio.
lead of the other equipment so that it can be controlled through conductor remota del otro equipo para poderlo controlar a tra ves Connectez lefil de commande adistance (bleu avec bande blanche)
this unit. de esta unidad. au ftl de commande a distance de !'autre appareil de ja(on qu'il
Disconnect the speakers from this unit, and connect Desconede los altavoces de esta unidad y conktelos al puisse etre commandi via cet appareil.
them to the amplifier. Leave the speaker leads of this unit ampliflcador. Los cables de los altavoces de esta unldad quedan oeconnectez les enceintes de cet appareil et connectez-les a
unused. sin usar. l'amplificateur. Laissez les fils d'encelntes de cet appareil inutilises.
You can switch off the built-in amplifier and send the audio Podra desconectar el amplificador incorporado y enviar las Vous pouvez mettre hors service l'amplificateur intigri et envoyer les
signals only to the external amplifier(s) to get clear sounds and to seriales de audio solamente al(los) amplificador(es) externo(s) signaux audio uniquement sur un ou plusieurs amplificateurs extirieurs
prevent internal heat built-up inside the unit. See page 46 of the para obtener sonidos nftidos y evitar que se caliente el interior de afin d'obtenir un son clair et d'iviter tout ichauffement interne de
INSTRUCTIONS. Ia unidad. Consulte Ia pagina 46 del MANUAL DE INSTRUCCIONES.
l'autoradio. Voir page 46 du MANUEL D'INSTRUCTIONS.

~---------------------~~---~
~--
Remote lead *8 Y-connector*8/ Conector en Y*8J Connecteur y*8
Cable remoto *8
Fil d'a/imentation adistance*8 "--..J

Subwoofer
Subwoofer
Caisson de grave

Camcorder etc.
Videoc.:lmara etc.
Camiscope etc.

Connecting the iPod or the iPhone I Conexion del iPod o iPhone I USB devices/ Dispositivos USB I Peripheriques USB
Connexion d'un iPod ou d'un iPhone
USB 2.0 cable (accessory of the iPod/iPhone) I
Cable USB 2.0 (accesorio del iPodliPhone) I USB cable {approx. 1 m I 3.3 feet)
Cable USB 2 0 (access01re du 1Pod!1Phone) Cable USB (aprox. 1 m I 3.3 pies)

, . ~--{O,IPod/iPhonel
Cable USB (environ 1m /3.3 pieds)
USB device
,...~
.....;;._ _ _ _ _ _"((!!..,[) - m=~-+..
,.---Oil]E>!~ -- ~~--- Disposltlvo USB
A Piriphirique USB

~-----+I ~11---1-c\--1 iPod/iPhonel KWADV64BT


KW-AV68BT
i
~
l {i:7.!::::=
,,--------
KS-U30
KWAV60BT
KW-AV60
(not supplied I no sumini strado I
nonfourni)
KW-ADV648T/KW-AV68BT
KW-AV60BT/KW-AV60

To watch video, connect the iPod/iPhone using JVC KS-U30 *12 (separately purchased), otherwise,
video is not displayed on the screen.
To listen to music, connect the iPodliPhone using a USB 2.0 cable (accessory of the iPod!iPhone).
Para ver video, conecte el iPod/ iPhone mediante el JVC KSU30 *12 (en venta par separado); de Ia
contra rio, no apareceril video en Ia pantalla.
Para escuchar mUsica, conecte el iPodl iPhone mediante un cable USB 2.0 (accesor io del iPod/
iPhone).
Pour voir une sequence video, connectez l'iPod/iPhone en utilisant le JVC KS-U30 .,2 (vendu
siparement), sinon, l'image video n 'apparait pas sur l'ecran.
Pour &outer la musique, connectez I'iPod!iPhone en utilisant le cdble USB 2.0 (accessoire du iPod!
iPhone).

II iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. I
*8 Not supplied for this unit. *8 No sumi nistrado con esta unidad . *S Non fourni avec cet appareil.
9 Audio cord (not supplied for this unit). *9 Cable de audio (no sumin istrado con esta unidad}. *9 Cordon audio (non fourni avec cet appareil).
10 Firmly attach the ground wire to the metallic body or to the chassis of *10 Fije firmemente el cable de tierra a Ia carroceria metillica o al chasis-a a
*10 Attachezso/idement lefil de mise Ia masse au chclssis metallique de Ia
the car-to the place uncoated with paint (if coated with paint, remove un Iuga r no cu bierto con pintura (siesta cubierto con pintura, quitela voiture- il un endroit qui n'est pas recouvert de peinture (s'il est recouvert
the paint before attaching the wire). Failure to do so may cause damage antes de fijar el cable}. De lo contra rio, se podrian producir daflos e n Ia de peinture, enlevez d'abord Ia peinture avan t d'attacher le fil). L'appareil
to the unit. unidad. peut etre endommage si cela n'est pas fait correctement.
11 Video cord (not supplied for this unit). *11 Cord6n de vid eo (no sumini strado con esta unidad). *11 Cordon video (non fourni avec cet appareil).
12 When using the cable, you need to change the setting on the unit (see * 12 Cuando utilice el cable, debera cambiarel ajuste en Ia unidad (consulte Ia *12 Lors de /'utilisation du cable, vous devez changer le riglage sur l'apparei/
page 26 of the INSTRUCTIONS). pagina 26 del MANUAL DE INSTRUCCIONES). (voi r page 26 du MANUEL D'INSTRUCTIONS).

Downloaded from www.Manualslib.com manuals search engine


t Connecting the microphone (Only for KW-ADV64BTIKW-AV68BTIKW-AV60BT) I Conexi6n de Ia unidad de micr6fono (S61o para KW-
ADV64BTIKW-AV68BTIKW-AV60BT) I Connexion du microphone (Uniquement pour le KW-ADV64BTIKW-AV68BTIKW-AV608T)
1 2 J

~~
Microphone
Micr6fono
Microphone
Q!J @
..,
~
Secure the microphone cord using cord cramps
(not supplied) if necessary.
Si es necesario, asegure el cable del micr6fono
por media de abrazaderas (no suministradas).
Fixez si n&essaire le cordon du microphone en
KW-ADV64BT utilisant des serre-flls (non fourn is).
KW-AV68BT
KW-AV60BT

Connecting the Bluetooth adapter (Only for KW-AV60) I Conexi6n del adaptador Bluetooth (S61o para KW-AV60) I
Connexion de l'adaptateur Bluetooth (Uniquement pour le KW-AV60)

~-------------- To the blue with white stripe lead of the supplied power cord
Blue with white stripe I Azul con rayas blancas I AI cable azul con rayas blancas del cord6n de alimentaci6n suministrado
KW-AV60 Bleu avec bande blanche Au fil bleu avec une bande blanche du cordon d'alimentation CJ;fourni

~ - <([)]::>--!.. ir-------- Ground I Tierra I Masse


1--;B:;-ia"'"ck:-/:-;N:;-e"""g~ro"""/:-:N:;-o.,.

~- 1-::-:-c:-:--:--:-:-:--------- To the brown lead of the supplied power cord CD


Brown I Marr6n I Marron AI cable marr6n del cord6n de alimentaci6n (J) suministrado
Au fil marron du cordon d'alimentation CD fourni
See page 61 of the INSTRUCTIONS./ Consulte Ia pagina 61 del MANUAL DE INSTRUCCIONES. I Voir page 61 du MANUEL D'INSTRUCTIONS.

Connecting the SiriusXM tuner (Only for KW-ADV64BTIKW-AV60BTIKW-AV60) I Conexi6n del sintonizador SiriusXM (S61o para KW-ADV64BTI
KW-AV60BTIKW-AV60) I Connexion du tuner SiriusXM (Uniquement pour le KW-ADV64BTIKW-AV60BTIKW-AV60)
Cuando conecte el sintonizador SiriusXM, consulte tambiEm el Lors de Ia connexion du tuner SiriusXM tuner, reportez-vous aussi au
manual suministrado con el mismo. mode d'emploi qui l'accompagne.
Pi!~tAUJirui~~ i,;;i,t (ie wnn~cte~J~ tuntr; SiriU$X;\{, llUf~~:v.olis
: q~~:l'ia~1~1ii#'t~n!.ion; '"'' ,,~;:~:::

To disconnect the connector


KW-AV64BT Para desconectar el conector
KW-AV60BT SiriusXM tuner Pour dtconnecter le connecteur
~ ------ ~
KW-AV60
L..,__-1~
Expansion port
. Sintonizador SiriusXM
Tuner SiriusXM
Grip the connector top tightly((])).
Sostenga el conector con firmeza (Q)). Pull out (@).
Puerto de extensiOn
Tenezferrnement le haut de l'adaptateur (Q)). Extraigalo (@).
Port d'extension Tirez (@).

. _ _ __ __ _ __ _ _ _ _
,__ie_d_fo_r_th_is_u_n_il_
JL_"_N_o_t_su_,_p_pi .JI I* 13 No suministrado con esta unidad. I I"13 Non fourni avec cet apparc.il.

TROUBLESHOOTING LOCALIZACION DE AVERIAS EN CAS DE DIFFICULTES


The fuse blows. El fusible se quema. Le fusible saute.
* Are the red and black leads connected correctly? * tEstan los conductores raja y negro correctamente conectados? ,. Les fils rouge et noir sont-ils racordis correctement?
Power cannot be turned on. Noes posible conectar Ia allmentacl6n. L'apparell ne peut pas ftre mise sous tension.
* Is the yellow lead connected? * tEsta el cable amarillo conectado? ,. Le fil jaune est-elle raccordie?
No sound from the speakers. No sale sonido de los altavoces. Pas de son des encelntes.
* [s the speaker output lead short-circuited? * t Esta e l cable de salida del altavoz cortocircuitado? * Le fil de sortie d'enceinte est-il court-circuite?
Sound is distorted. El sonido presenta distorsi6n. Le son est deforme.
* Is the speaker output lead grounded? * t Esta e l cable de salida del altavoz conectado amasa? * Le fil de sortie d'enceinte est-il ala masse?
* Are the"- " terminals ofL and R speakers grounded in common? * tEstan los terminales "- " de los altavoces Ly R conectados a una ,. Les barnes "- "des enceintes gauche et droit sont-elles mises ensemble
Noise interfere with sounds. masacomUn? aIa masse?
* Is the rear ground terminal connected to the car's chassis using Perturbaci6n de ruido. Interference avec lessons.
shorter and thicker cords? * lEI terminal de tierra trasero esta conectado al chasis del * La prise arriere de mise a Ia terre est-elle connectie au chd.ssis de Ia
This unit becomes hot. autom6vil utilizando los cordones mas corto y mas grueso? voiture avec un cordon court et ipais?
* Is the speaker output lead grounded? La unldad se callenta. L'appareil devient chaud.
* Are the "- " terminals of L and R speakers grounded in common ? * tEsta el cable de salida del altavoz conectado a masa? *Left/ de sortie d'enceinte est-il ala masse?
This unit does not work at all. * lEstan los terminales "-" de los altavoces Ly R conectados a una * Les bornes "- "des enceintes gauche et droit sont-elles mises ensemble
* Have you reset your unit? masa comUn? ala masse?
Este receptor no funciona en absoluto. Cet appareil ne fonctionne pas du tout.
* lReinicializ6 e l receptor? * Avez-vous reinitialise votre appareil?

Downloaded from www.Manualslib.com manuals search engine 6


iPhone/iPod users:
PLEASE READ THIS BEFORE USING YOUR NEW UNIT
You have two options when connecting an iPhone or an iPod to Setting <AV Input> for iPod/iPhone playback
your new unit:
1
Ill OPTION 1 (Default Setting):
Using the optional JVC KS-U30
Your unit is pre-set from the factory to allow audio and vidE~o playback
when you connect your iPhone or iPod using the OPTIONAL JVC KS-U30
cable (Sold Separately). If you purchased
the KS-U30, simply connect your iPhone or
2
iPod using this optional cable.

Ill OPTION 2 :
If you wish to connect your iPhone or iPod with a 30-pin USB cable
(this is the white cable that is supplied with your iPhone or iPod), you
will need to follow the simple steps below to assure audio playback: 3
Please go to [AV Menu] > > Select [AV Off] >> Select [AV MENU] >>
Select [Settings] >> [Input], then select [AV-IN] at "AV Input" Menu.

Important Notice:
When using a 30-Pin iPod USB cable, audio signal does not come
through via USB if you select "iPod'~ You must select AV-IN when using
your 30-Pin USB Cable.

Downloaded from www.Manualslib.com manuals search engine


When it is not required to detach
the front control panel from
the main unit, use the
provided screws to
attach the control
panel to the
main unit.

LV45426-001 A

Downloaded from www.Manualslib.com manuals search engine


Caution on cleanit~JfCtJie un it
Do not use any solvent (for ex~f@';t~inner, benz ine, etc.),
detergent, or insecticide. This mciY tuna ge the mon itor or the unit .

''--
~ -----
' ' ......... ....
.....
'' '
'

Recommended cleaning met hod :


Gen tly wipe the pane l with a soft, dry cloth. LVT1970-001A

Downloaded from www.Manualslib.com manuals search engine


w a: z
U)~Q
::D :::: ~ ~CAUTION CONNECT BLACK WIRE ((l)GND) TO GROUND F:IRST.
OTHERWISE, DAMAGE TO YOUR UNIT MAY OCCUR.
~ ~ ~ i INCORRECT CONNECTION CAUSES SERIOUS DAMAGE TO THIS UNIT
0 en i= : PLEASE READ INSTALLATIONJCONNECnON MANUAL CAREFULLY.
LL. w
w !i
:::: il---------------.... -----------------1
al c( ~ CONNECT GROUND FIRST CONNECT OTHER WIRES
w 0 ~
...J
m .,_a::
S:! ::i
w :
'
-c (.) .....
t_),~~~
:E w (.)
0 w ::::
a:: ..... Q METALLIC BODY OR CHASSIS

~m ~cw
OF THE CAR

w wt=
CONNECT POWER CORD TO
g CONNECT ANTENNA TERMINAL

:5 ~ i=
w ,w
@ THE UNIT

U) :::: w
- a I=
~ ffi w
w :5 (.)
~ a:: Gt
w D::
iS 'D::ffi a::ffi
~

Downloaded from www.Manualslib.com manuals search engine


Please do not send products or other
correspondence to this address. PLEASE
PLACE
JVC AMERICAS CORP. STAMP
1700 Valley Road HERE
Wayne, NJ 07470

PO BOX 1189
BEDFORD, TX 76095-1189

11 1.11 .. 11 1.1 1.1 11 111 1.1.1 1.. 1.1.1 .. 1... 11

PRODUCT REGISTRATION CARD I QUESTIONNAIRE

USA CUSTOMERS ONLY

Registering your product will allow us to contact you in the unlikely


event a product safety notification is required.

This form is for Product Registration purposes only. Failure to return


this form does not diminish your rights during the warranty period.

THANK YOU FOR PURCHASING THIS JVC PRODUCT

REGISTER ONLINE AT: REGISTER.JVC.COM


Downloaded from www.Manualslib.com manuals search engine
Register online at REGISTER.JVC.COM
and receive a special offer!

PRODUCT REGISTRATION
First Name:
Last Name:
Address:
Apt.#
City:
State:
Zip Code:
Phone Number:
E-Mail Address:

1) Would you like to receive the JVC Community e-mail newsletter? Yes No
2) Would you like to receive special offers from JVC? Yes No
3) Have you purchased an extended warranty for this product? Yes No

Date of Purchase
Model Number:
Serial Number:
Purchase Price:
Dealer:
On a scale of 1 to 5, with 5 being the best, please rate each of the following attributes about your new
JVC product.

Performance 1 2 3 4 5
Features 1 2 3 4 5
Ease of use 1 2 3 4 5
Design 1 2 3 4 5
Value 1 2 3 4 5

COMMENTS:

Thank You
for completing
this questionnare.

BT-51044-1 Instructions: Fold at crease and tape open edge in the middle.
(0208) Printed in Indonesia
Downloaded from www.Manualslib.com manuals search engine
CANADA
ONLY
JVC CANADA
SEULEMENT

OWNER'S COPY OF WARRANTY CARD


COPIE D'ENREGISTREMENT DE LA GARANTIE
DU PROPRIETAIRE
WARRANTY
GARANt II
(Save sales docket together with this warranty card, as a proof of date of purchase.
La facture et cette garantie sont vos preuves de Ia date d 'achat; rangez-les.)
MODEL . SERIAL NO. .
MODELE. ......... . .. .......... NO DE SERlE .....................
Purchase from. Date purchased .
Achete chez .................... . Date achete JVC CANADA INC.
Dealer's Address .
Adresse du Vendeur' ......................... 21 Finchdene Square, Toronto, ON M1X 1A7
No. Street
No Rue TEL: (416) 293-1311 FAX: (416) 293-8208
City or Town Postal Code
http://www.jvc.ca
Ville Code Postal
JVC CANADA INC. (hereafter called "JVC") gives JVC CANADA INC. ( ci-apres appele "JVC")
Owner's Name
Nom du Proprietaire :.. the following express warranty for each new JVC enonce Ia garantie expresse suivante pour tout
Owner's Address product distributed in Canada by JVC and sold nouveau produit JVC distribue au Canada par JVC
Adresse du Proprietaire... ................. . by an authorized JVC dealer. et vendu par un detaillant JVC autorise.
No. sireei Apt. JVC warrants that this JVC product is free, under JVC vous garantit que ce produit est degage, sous
No Rue App. normal use and maintenance, from any defects in utilisation et entretien normal, de tout defaut
................. ................................. material and workmanship subject to the following materiel et de fabrication sous reserve des
City or Town Prov. Postal Code
Ville Prov. Code Postal terms and conditions: modalites et conditions suivantes :
... 1. To Obtain Warranty Service: 1. Pour obtenir un service de garantie :
(a) La carte de controle de garantie JVC ci-
(a) The JVC Warranty Control Card herein
provided must be completed in full and incluse doit etre completee avec les
posted or registered via internet within 7 days renseignements complets et etre postee ou
BT-52008-1 enregistree via internet dans les 7 jours
Printed in Indonesia of date of purchase of the JVC product.
(1007) Detach here. a decouper ici suivant l'achat du produit JVC.
(b) This JVC Warranty Control Card must be (b) Cette carte de controle de garantie JVC doit
completed in full and presented together etre dument remplie et etre presentee avec
with proof of purchase of the JVC product Ia preuve d 'achat du produit JVC
WARRANTY CONTROL CARD requiring service. necessitant une reparation.
CARTE DE CONTROLE DE LA GARANTIE (c) The JVC product must be brought in for (c) Le produit JVC doit etre apporte pour
IMPORTANT: This warranty control card must be filled in and posted to the address indicated service to an authorized JVC Service Centre. service chez un centre de service JVC
on the back hereof or register via internet within 7 (seven) days from the date of purchase. autorise.
IMPORTANT: Cette carte doit etre renvoyee dument remplie l'adresse indiquee au verso, a 2. Limitation:
dans les 7 jours de Ia date d'achat ou aller sur le site par internet pour !'enregistrement. This Warranty shall not apply to: 2. Restrictions:
(PLEASE PRINT/EN LETIRES MOULEES) Cette garantie ne s'applique pas aux :
MOOEL . SERIAL NO. . (a) Repair or replacement of any cabinets,
MOOELE..... ... NO DE SERlE .. - batteries, plates, connection cords, anten- (a) Reparation o u remplacement de tout
Purchased from . Date purchased . cabinet, batteries, panneau avant, cordons
Achete chez ....: .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. Date achete nas, dust covers, knobs, speaker grills,
Dealer's Address de raccord, antennas, housses de
speaker cones, projection screens, projection
Adresse du Vendeur riia: ......................................siriiat screen savers, and all accessories.
protection, boutons, couverts de haut-
No Rue
parleur, cones de haut-parleur, ecrans de
(b) Any defects caused or repairs required as a projection, protecteurs d'ecran de projection
Prav. ..... .................... .. '"'POStiti 'CCX9"' .. ... result of misuse, abusive operation, negli-
City or Town et tous les accessoires.
Ville Prov. Code Postal gence, improper use and/or insufficient care. (b) Tous defauts occasionnes ou reparations
Owner's Name .
Nom du Proprietaire ............. .. ......... (c) Any defect caused or repairs required as requises suite a une utilisation abusive,
Owner's Address a result of not following the instructions in mauvaise, negligente et/ou une utilisation
Adresse du Proprietaire ......................... ... ...................................................................................... incorrecte.
No. Street Apt. the operation manual.
No Rue App. (d) Any JVC product tampered with, adjusted (c) Tous defauts occasionnes ou reparations
............................................. .... .......
City or Town Postal Code or repaired by any party other than JVC or requises suite a !'omission de suivre les
Ville
recommandations du manuel d'instruction.
Code Poslal authorized JVC Service Centre personnel. (d) Tout produit JVC altere, ajuste ou repare par
You may also register on-line Vous pouvez egalement vous tout autre entreprise que JVC ou un centre
at:www.ivc.ca inscrire par internet a:www.jvc.ca de service d 'entretien ou de service
autorise JVC.
WARRANTY APPLIES ONLY TO PRODUCT LA GARANTIE S'APPLIQUE SEULEMENT AUX PRODUITS
DISffiiBUTED IN CANADA BY JVC CANADA INC. DISTRIBUES AU CANADA PAR JVC CANADA INC.

Downloaded from www.Manualslib.com manuals search engine


(e) Any JVC products on which the serial (e) Tout produit JVC dont le numero de serie a (I) Any defects caused by fire, flood , lightning , (I) Tout dommage cause par le feu, une
num-ber has been defaced , modified or ete altere, modifie ou enleve. power surge , or other events beyond the inondation , un eclair, une surtension ou tout
removed . (f) L'entretien, les verifications periodiques et control of JVC. autre evenement hors du controle de JVC.
(f) Maintenance, cieaning or periodic check-up nettoyage. (m) FOR AUTO PRODUCTS (m) POUR LES PRODUITS D'AUTOMOBILE
(g) Conversion to foreign or domestic voltage or (g) La conversion a une frequence ou une Warranty does not cover elimination of car La garantie ne couvre pas !'elimination
tension etrangere ou domestique. static or electrical interferences, cleaning d'interferences statiques ou electriques de
frequency.
(h) Tout produit JVC n 'ayant pas le sigle of head, adjustments, or labour cost for the Ia voiture , le nettoyage de tete, les
(h) Any JVC product without the Canadian
d 'identification conforme aux normes removal or reinstallation of the unit for ajustements et les coOts de main d'ceuvre
Electrical Safety Regulations ID. associes a l'enlevement ou aIa
(i) Any JVC products used for commercial or electriques Canadiennes (GSA). repair.
institutional , rental , or display purposes . (i) Pour tout produit utilise a des fins reinstallation de !'unite pour reparation.
commerciales, institutionnelles , de location
Parts . ... .. 1 year (except video head - 90
days)
a
ou utilise des fins d'etalage . 3. Standards: 3. Criteres :
Pieces... .... ..... 1 An (Excepte les tetes If any defects should be found in a JVC product Si un produit JVC s'averait defectueux, selon les
Labour .. . 90 days within the applicable terms, necessary repairs conditions applicables , les reparations
video- 90 jours)
(j) Any JVC product which has been resold and Main d'ceuvre ... 90 Jours shall be made at no cost to the purchaser for necessaires seront effectues sans coOts
no longer owned by the original purchaser. (j) Tout produit JVC ayant ete revendu et qui parts or labour when JVC acknowledges that additionnels a
l'acheteur pour les pieces et Ia
(k) Product purchased from "outside Canada", n'est plus Ia propriete de l'acheteur original. such defects are due to faulty material or work- main d'ceuvre lorsque JVC reconnait que de telles
"bankruptcy" or "liquidator". (k) Produit achete a "l'exterieur du Canada", manship. defectuosites sont causees par une defectuosite
provenant d'une "faillite" ou d 'un "liquidateur". de materiel ou de fabrication.
4. Exclusion of All Other Express Warranties:
WARRANTY TERM (VALID FROM THE DATE OF PURCHASE) This warranty constitutes the entire express 4. Exclusion de toutes autres garanties expresses:
a
CONDITIONS DE GARANTIE (VALABLE PARTIR DE LA DATE D'ACHAT) warranty given by JVC for JVC products and Cette garantie constitue l'entiere garantie express
donnee par JVC pour ies produits JVC . Nul
no dealer or service centre personnel or his,
PRODUCT PARTS (Years) Labour (Years) representant ou employe d'un detaillant ou d'un
its or their agent or employee is, or are autho- a
PRODUIT PIECES (annees) MAIN-D'OEUVER(annees) service d'entretien n'est autorise prolonger cette
rized to extend or enlarge this warranty on be-
garantie au nom de JVC.
half of JVC.
Projection TV In-Home Service
Colour TV In-Home (25" and above) 5. Denegation des dommages indirects :
5. Disclaimer of Consequential Damage: Dans Ia mesure permise par Ia loi, JVC nie toute
D-ILA Rear Projection In-Home Service To the extent the law permits JVC disclaims
LCD TV In-Home Service (25" and above) responsabilite pour perte de temps ou d'usage de
any responsibility for loss of time or use of its ses produits, des coOts de transport ou tout autre
Ecrans de projection Service a Domicile 1 1
product, transportation costs , or any other
Ecrans de TV Couleur Service a Domicile (25" et plus) dommage ou inconvenient indirect, accidentel et
indirect, incidental or consequential damage or consequent.
TV projection arriere D-ILA Service a Domicile
inconvenience.
Ecrans de LCD Service a Domicile (25" et plus)
And mail to th e address below. a
Veuillez poster l'adresse ci-dessous.

In-home service to be provided where available


~ You may also register on-line INouveau I Vous pouvez egalement vous
Where it is not available, the Purchaser must assume the responsibility and expense for the proper at:www.jvc.ca enregistrer par internet a;
www.jvc.ca
packing, shipment and all costs associated with the delivery of the equipment to and from the closest
JVC Authorized Service Centre. Detach here . a decouper ici
Service a domicile fourni par un detaillant disponible.
S'il n'y a pas de service JVC disponible a proximite, l'acheteur doit assumer Ia responsabilite et les
couts pour un emballage adequat, !'expedition, ainsi que tous les couts associes. a Ia livraison de
l'equipement chez et depuis le detaillant JVC autorise le plus pres pour un service d'entretien.

Receivers and Home Speakers purchased separately, Front Place stamp


Projection and Car Audio "ARSENAL" Series here
2 2
Recepteurs et Hauts-Parleurs achetes separement, Projecteur Placez votre
Avant et Audio d'Auto de Serie " ARSENAL " timbre ici

AC Adapters, Remote Controls, Headphones, Microphones and 90 DAYS 90 DAYS


Projector Lamps
Adaptateurs AC , Telecommande, Casque D'ecoute, Microphones 90 JOURS 90 JOURS
et Lampe de Projecteur
JVC CANADA INC.
Wood Cone Speakers
5 5
Enceinte a Cone en Bois 21 Finchdene Square
All Other Categories
Toronto , ON M1X 1A7
Toutes les autres categories 1 1

Downloaded from www.Manualslib.com manuals search engine


TO OUR VALUED CUSTOMER--
THANK YOU FOR PURCHASING THIS JVC PRODUCT.
WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE.

NEED HELP ON HOW TO HOOK UP?


NEED ASSISTANCE ON HOW TO OPERATE?
NEED TO LOCATE A JVC SERVICE CENTER?
LIKE TO PURCHASE ACCESSORIES?

JVCIS HERETO HELP!


TOLL FREE: 1(800)252-5722
http://www.jvc.com

Remember to retain your Bill of Sale for Warranty Service.

- - - Do not attempt to service the product yourself

Caution
To prevent electrical shock, do not open the cabinet.
There are no user serviceable parts inside.
Please refer to qualified service personnel for repairs.

BT-51018-6
(1008) Printed in Indonesia

Downloaded from www.Manualslib.com manuals search engine


******************************************************************************
i JVC
~
LIMITED WARRANTY
I ONLY FOR PRODUCT PURCHASED IN U.S.A.!
1-1 I USA ONLY I i
~
* JVC Americas Corp. (JVC) warrants this product and all parts thereof, except as set forth below ONLY TO THE *
~ ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of ~
* original purchase for the period shown below. ("The Warranty Period") *
*~ I PARTS I LABOR *
~
* 1 YR 1 YR *
** THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND **
~ IN THE COMMONWEALTH OF PUERTO RICO. ~
~ WHAT WE WILL DO: ~
~ If this product is found to be defective within the warranty period, JVC will repair or replace defective parts with new or ~
* rebuilt equivalents at no charge to the original owner. Such repair and replacement services shall be rendered by JVC *
~ during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the ~
* remainder of the Warranty Period. All products may be brought to a JVC authorized service center on a carry-in basis. *
* Color televisions with a screen size of 37"class or greater qualify for in-home service. In such cases, a technician will *
~ come to your home and either repair the TV there or remove and return it if it cannot be repaired in your home. ~
~ WHAT YOU MUST DO FOR WARRANTY SERVICE: ~
*~ Instead,
Please do not return your product to the retailer *
return your product to the JVC authorized service center nearest you. If shipping the product to the service ~
*center, please be sure to package It carefully, preferably in the original packaging, and include a brief description of *
~the problem(s). Please call 1-800-252-5722 to locate the nearest JVC authorized service center. Service locations ~

**can also be obtained from our website http://www.jvc.com. If your product qualifies for in-home service, the service
representative will require clear access to the product. **
*~ If you have any questions concerning your JVC Product, please contact our Customer Care Center at 800-252-5722 *~
* WHAT IS NOT COVERED:
~ This limited warranty provided by JVC does not cover:
*
~
* 1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty*
~ installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by~
* JVC to render such service, or if affixed to any attachment not provided with the products, or if the model or serial*
* number has been altered, tampered with, defaced or removed; *
~ 2. Initial installation, installation and removal from cabinets or mounting systems. ~
* 3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning; *
~ 4. Damage that occurs in shipment, due to act of God, and cosmetic damage; ~
* 5. Signal reception problems and failures due to line power surge; *
~ 6. User Rem?val Memory DevicesNideo Pick-up Tubes/CCD Image Sensors are covered for 90 days from the date of purchase;~
* 7. Accessones; *
* 8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase); ~
~ 9. Products used for commercial purposes, including, but not limited to rental. *
* 10. Loss of data resultant from malfunction of hard drive or other data storage device; *
*~ There are no express warranties except as listed above. *~
~ THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS ~
* LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. *
** JVC SHALL NOT BE LIABLE FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE, OR ANY OTHER **
~DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, ~
*DAMAGE TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT *
* OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE *
~WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE ~
~ WARRANTY PERIOD SET FORTH ABOVE. ~
~ Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an ~
* implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific *
~ legal rights and you may also have other rights which vary from state to state. ~

* JVC AMERICAS CORP. *


~ 1700 Valley Road, Wayne, New Jersey 07470 ~
~ http://www.jvc.com ~
******************************************************************************
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAIL
OF REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY
INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT.

For customer use:


Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet.
Retain this information for future reference.

Model No.: Serial No.:


Purchase date : Name of dealer :

Downloaded from www.Manualslib.com manuals search engine

You might also like