Clark Door sliding freezer doors are
designed with an internal reinforced
panel frame with foamed in place
construction to give uniform insulation
by eliminating ‘air pockets’ with a rugged
hardwearing door performance.
Clark Door sliding freezer doors are
designed with an internal reinforced
panel frame with foamed in place
construction to give uniform insulation
by eliminating ‘air pockets’ with a rugged
hardwearing door performance.
Clark Door sliding freezer doors are
designed with an internal reinforced
panel frame with foamed in place
construction to give uniform insulation
by eliminating ‘air pockets’ with a rugged
hardwearing door performance.
Clark Door Cold Storage doors are MANUAL OPERATION
designed for freezer and chill applica- Double J track with ball bearing tions to assist with temperature con- trolley wheels ensure smooth effort- At a Glance.. trol in storage facilities. The heavy less opening and closing of door. A OPERATING TEMPERATURE duty, robust design provides a long compound down and in track sys- lasting door in demanding distribu- tem brings the door into positive -30c or lower if required tion/storage areas. contact with the perimeter seals and floor when closed. The angled track Available Arrangements Design also ensures minimal seal wear by Single and Double Leaf Clark Door sliding freezer doors are lifting the door away from both the Horizontal and Vertical Operation designed with an internal reinforced wall and floor. Drop weight system panel frame with foamed in place with magnetic hold can be fitted for FIRE RATING* construction to give uniform insulation link to fire alarm. by eliminating air pockets with a rug- Up to 120 Minutes ged hardwearing door performance. ELECTRICAL OPERATION Variable Speed Drive System THICKNESS *Fire Rating The system consists of a single Doors can be built in accordance to phase AC variable speed gear mo- Between 100mm and 150mm previous tested designs with fire rat- tor with integral high efficiency gear- ings up to 2 hours to BS:476 Part 22. box featuring controlled acceleration U VALUE Clark Fire Doors feature a composite and deceleration over the door Between 0.28W.m-2K and 0.14W.m-2K panel construction and flame baffle opening and closing cycle. The con- seal arrangement. troller features an encoder position- ing system to ensure precise seal CERTIFICATION Finish compression in the closed position CE Mark (Declaration of Conformity) The door and frame will be finished in with automatic reset in the event of White Foodsafe PVC. Characteristics a power failure. Type Approval LPC Red Book 2011 (Part of BRE) include:- Control Features Construction Products Directive - Mould and stain resistance 24 V extra low voltage control cir- BSEN 13241/1 - Safe for continuous food contact cuit for increased safety. LVD Compliant BSEN 60204/1 - Anti-static Single Horizontal Sliding (SHS) Other finishes available on request Opening speed of up to 0.75m.s.-1 EMC Compliant BSEN 61000-6-2 Closing speed of up to 0.30m.s.1 Seal Arrangement Double Horizontal Sliding (DHS) Twin sweeper neoprene gasket seals Opening speed of up to 1.5m.s.-1 are fitted to the bottom of the door Closing speed of up to 0.5m.s.1 panel with adjustable cloth reinforced Inbuilt short circuit and overload bulb seals to the head and vertical protective device. perimeter of the door to give an effec- High integrity fail safe electrical tive barrier to the movement of air. design in accordance with all rele- vant regulations. Panel Heaters Operation For lower temperature applications, We can offer a vast array of options our doors feature bottom panel heat- including Pullcords, Push Buttons ers which have an additional capacity and Motion Detectors. to ensure a warm chamber is formed under the door by the seals Eliminat- ing the need for floor heaters. A 110 volt (centre tapped) low voltage heater system with its own trans- former provides heating to both door panels and seals where appropriate to avoid door seizing.