Professional Documents
Culture Documents
# AYC-MS-CVL-016
Revision 00
Date 22/8/2016
Page No 1 of 3
00
PMT
Doc.Ref.
# AYC-MS-CVL-016
Revision 00
Date 22/8/2016
Page No 2 of 3
PURPOSE:
This Method Statement defines the procedures and practices that will be
used for concrete curing compound (ANTISOL E15) application.
LIMITATIONS:
a) This statement should be applicable for the duration of the project
as per the current base-line schedule or any approved revisions to
the schedule.
b) Product shall only be applied with their intended use.
c) Curing Compound application can be done only after three
consecutive days of water curing on concrete structures as per .
SCOPE OF WORK:
Concrete curing works within Industrial Support Building Facilities (ISFB)
EPC-06.
REFERENCES:
a) ASTM C 309 Standard Specifications for Liquid Membrane Forming
Curing Compounds and Curing and Sealing Compounds.
b) Project Specification Division 3-Concrete, Section 03370-Curing
c) Saudi Aramco Engineering Standards (SAES)
d) ANTISOL-E15 data sheet
RESPONSIBILITIES:
a) Project / Site Engineer- Prepare and update MS
b) Review - QC Department and HSE
c) Construction Team - Implementation
TOOLS/EQUIPMENT:
Conventional tools and/or equipment aside from sprayers will be
used as found necessary to complete the work procedure.
Revision 00
Date 22/8/2016
Page No 3 of 3
ATTACHEMENT:
a) Antisol - E15 Approval/Data Sheet