Professional Documents
Culture Documents
's
MODEL
TAD,TK TA SERIES BASIC AND HYBRID PBX
TA-308,TA-416,TA-632,TA-832,TA-864,TA-16128,TA-16240
System Components
Content Descriptions
TAD Series
Service Unit TK Series Basic PBX & Hybrid PBX System
TA Series
Any Phone Any regular Telephone
Telephone MT-8 32button Proprietary Telephone Set
MT-9 21button Proprietary Telephone Set (Miracall)
Optional
MC-010DR Universal Door Phone & Opener
Equipment
Music-on Hold External Music Connection
Voicemail Voicemail or Auto-attendant System ,Answering machine
User Supplied
VoIP VoIP Gateway
GSM FWT Fixed Wireless Termincal
WARNING
CHECK THE POWER SUPPLY OF THE PBX BEFORE CONNECTION, MAKE SURE
IT IS SAME AS LOCAL VOLTAGE
Section 3 Appendix..................................................................................63
3.1 System Factory Setting List ..................................................................................... 64
3.2 Program Quick Reference........................................................................................65
PBX Outside View
TK-848,16128,TA-16128 PBX
TS-416,TAD-416,TAD-632 Series
Operation
You can use Miracall Key Telephone Set to program and work with this PBX.
Can use any brand Single Line Telephone Set to program and work with it
Remarks: Use Miracall SDMR Software,you can also program this PBX,also
the software has accounting function as well as hotel features.
Attention
1. Make Sure the Power Supply is 220VAC or 110VAC Before Connection.
2. The Hybrid Ports Mean This Port Can Connect Miracall Key Telephone,Also
Can Connect Single Line Telephone.
WARNING
CHECK THE POWER SUPPLY OF THE PBX BEFORE CONNECTION, MAKE SURE
IT IS SAME AS LOCAL VOLTAGE
- Intercom Call
- Call Operator
- Call Outside
Intercom Calling
The extension call to other extension.
Operate
Extension no.
(8001~8128)
Extension no. : It means original extension numbers 8001,8002,8003 ~8128 ,or the
new numbers that you have modified;
In system factory status, User pickup handset and hear the intercom dialing tone.
If dial 0, then it will route to external dialing mode, user can still use * to switch
to intercom mode.
2 USERS MANUAL
1.2 Make Calls
Call Operator
Any Telephone
Call Outside
Operate
or Outside no.
CO
Redial number
(REDIAL)
Call Override
You can insert into an Outside Line conversation to establish 3-party conference call.
Operate
All Telephone
CO
4 USERS MANUAL
1.2 Make Calls
To set
Extension no.
To cancel
Call to the busy extension and busy extension will ring back when free.
To cancel
( FLASH)
Off hook,dial number and busy,Flash and input: ##00 confirm music,then on-hook
USERS MANUAL 5
1.2 Make Calls
1. The extension will ring after Caller dial the desired number;
2. When OGM message playing, Caller can also dial 0 to reach to Operator extension
8001 , if EXT8001 is busy, then 2nd Operator 8002 will ring.
3. No dialing : if Caller do not dial when message playing, then the call will automatically
route to the Operator extension;
6 USERS MANUAL
1.2 Make Calls
Intercom status, you can conveniently use 2- digit number to make outside call.
To Enable
A B C D
Remarks: You need enable Abbreviation-dialing function at master port 8001,ABCD is the
extension number such as 8002,8005,8007 etc.
Save Number
N O Telephone no.
Extension ABCD
Off-hook Input #**NO + Telephone number # On-hook
Make Call
N O Talking
Extension ABCD
Off-hook Input ##NO Calling to Telephone no.
USERS MANUAL 7
1.2 Make Calls
You can use 2-digits as account number to make outside call. Making call at different
extension, the calling logs or billing list will be only related with the account.
To Enable
6 N O
EXT8001 Off-hook Input **002008# + *76NO1# On-hook
Make Call
N O 2008 Talking
Remarks:
1. NO = 01~99, the account code number.
2. 2008 is default password making account-code call. You can change password
3. To change account password: at same extension,input #*# NO + PSWD (PSWD is
4-digit new password)
8 USERS MANUAL
1.3 Receiving Calls
Operate
Operate
Operate
Operate
(HANDFREE)
USERS MANUAL 9
1.3 Receiving Calls
Randomly Pickup
Can pick up the extension which firstly ring .
Operate
Operate
10 USERS MANUAL
1.3 Receiving Calls
The call will not ring to your extension after set DND feature
To Set
To Cancel
USERS MANUAL 11
1.3 Receiving Calls
All calls to Boss will automatically transfer to Secretary extension firstly.Thus no spam calls
will disturb Boss.
System support max. 8pcs of telephones to set this feature at same time.
To Set
6 A B C D
Bosss Extension
Off-hook To Setup: Press #*6 800x On-hook
To Cancel
6
8 8
12 USERS MANUAL
1.3 Receiving Calls
1. The extension will ring after Caller dial the desired number;
2. When OGM message playing, Caller can also dial 0 to reach to Operator extension
8001 , if EXT8001 is busy, then 2nd Operator 8002 will ring.
3. No dialing : if Caller do not dial when message playing, then the call will automatically
route to the Operator extension;
USERS MANUAL 13
1.3 Receiving Calls
In Auto-attendant mode, Caller only dial 1-digit ,such as 1 2 ... 8 9,then the call
will route to the desired extension number. You can only dial 2 for Sales Department, dial
3 to Service, etc.
Remarks: the digit of Nevigate number can NOT SAME with first-digit of Extension.
If keep on Off-hook, You can continue to input code in System Program mode.
To Set
5 E A B C D
8001 Extension Login System: **002008#
Off-hook To Enable: Press *191# On-hook
Clear the Nevigate Digit: *240 E # (E=1~9)
Set digit E Nevigate to Extension ABCD:*250E ABCD#
To Cancel
14 USERS MANUAL
1.3 Receiving Calls
In Auto-attendant Mode, PBX can realized the incoming Fax signal and automatically transfer
this fax call to desired Fax extension (ABCD). Fax Machine need to be in auto receiving mode.
To Set
A B C D
EXT8001
Off-hook To Setup: Press**00 2008 # *17ABCD# On-hook
To Cancel
EXT8001
Off-hook To cancel: Press **002008# *17# On-hook
USERS MANUAL 15
1.3 Receiving Calls
To Set
C O A B C D
EXT8001
Off-hook To Set: Press**00 2008 # *23CO ABCD# On-hook
(CO= 01~32,CO Line, ABCD is Extension no.)
To Cancel
C O
EXT8001
Off-hook To Set: Press**00 2008 # *21CO # On-hook
(CO= 01~32,CO Line)
16 USERS MANUAL
1.4 During a Conversation
Call Transfer
During a conversation:
Extension no.
After flash the hook-switch, the Caller party will hear Music-on-holding.
If destination extension do not pick up the call ,within 25seconds, the conversation
will be back again .
You have to regulate the Flash time if the line will be cut off when transfer.
USERS MANUAL 17
1.4 During a Conversation
You can hold on the conversation with CO Line party and retrieve it.
To Set
( FLASH)
To Retrieve
Or
The on-hold call will be cut off if within 3 minutes do not take back.
18 USERS MANUAL
1.4 During a Conversation
During a 2-party conversation (1CO +1EXT), you can add a third party join together for a
3-party conference call.
Operate
Operate
During a conversation:
Extension no.
The conversation party should be 1 Outside Line party and 2 extension party.
To leave a Conference
Operate
To leave
On hook
USERS MANUAL 19
1.5 When You Leave Desk
You can forward the incoming call to some specified extension before you leave.
Operate
To Set
Forward
Extension no.
All Calls:
Off hook ,Press #* 2 + extension no. + on-hook
Forward
Extension no.
on busy:
Off hook ,Press #* 1 + extension no. + on-hook
Forward
All Calls
Cancel:
Off hook ,Press #* 200 + on-hook
Forward
on busy
Cancel:
Off hook ,Press # *100 + on-hook
20 USERS MANUAL
1.5 When You Leave Desk
You can lock your extension so that other person can not dial out .
To operate
Operate
To Lock
Password no.
Operate
To Unlock
Password no.
Operate
Change Password
5 PASW pasw
You can play the welcome message from PC source and import to the PBX DISA recording
Operate
To Operate
1 8 8
1 8
1 8 8 8 Import music
1 8 8 8
Off hook , input 3-level OGM record code + on-hook
same time playing music from PC
and export to PBX
You can see the original and after-numbering number for the present extension.
Operate
To Operate
22 USERS MANUAL
1.6 Special Operation
You can start System Program remotely for the end user and set the desired features for PBX.
Operate
User Operate
waiting
Prog ram Code
for
EXT8001 Off hook ,Flash hook-switch + #* #* + Waiting for remote program + on-hook
Operate
Factory Act
You can select call from PBX 8001 extension to factory technical or call from factory
to PBX.But must operate at extension 8001.
USERS MANUAL 23
1.6 Special Operation
You can select to dial 0 or dial 9 to call PSTN telephone number or call to Operator.
Code:
Operate
To Set
EXT8001 off-hook Input **002008 + *0304 90# or *0304 09# for selection
24 USERS MANUAL
Section 2
System Program
USERS MANUAL 25
2.1 Before System Program
Following is the steps which should be pay attention by users before Program.
You can use any brand or any type of regular phone set.
1. You can continue to input the code without on-hook, with starting of * and end
with # . If program wrong then can input * to re-start the wrong program;
2. After finish Program, you will hear 1 single beep du which means correct, if you
hear du-du-du then the Program is incorrect.
3. All extension should stop operate and not allow any connection with Outside Line
port or extension port. Otherwise the Program maybe failed.
du
0 0 2 0 0 8 # + start other #
Extension 8001 Program On-hook
Off-hook System Password
Steps: pickup extension 8001, input **00 2008 #, then it means now the phone is ready
for system program . You can continue to start the programs.
26 USERS MANUAL
2.2 System Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
0 1 N E W P #
New Password
On-hook
If user forget the password which programmed, please ask help from our dealer or
factory directly .
USERS MANUAL 27
2.2 System Program
du
Extension 8001 0 2 0 0 0 8 #
Off-hook System Password
Music playing
1 4 #
On-hook
The on hold music can also be from external Mp3 player ,which can import from the
MOH port in PBX.
28 USERS MANUAL
2.2 System Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
9 0 0 0 #
On-hook
User can re-set system to factory after system work for some time;
This code do not re-set Extension number, Outside Line port switch status and
Call logs for PC.
USERS MANUAL 29
2.2 System Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
8 5 1 Y Y M M D D W #
Year Month Date Week
du
8 5 2 h h m m #
On-hook
Hour Minute
On-hook
YY : Year, such as 2010 need to input "10", 2011 input "11" etc.
MM : Month, from 01~12
DD : Date, from 01~31
W : Week, from 1~7 , 1 means Monday, 2 means Tuesday.. 0 means Sunday;
hh : Hour, from 01~24, 24-hour format;
mm : Minute, from 01~60
to program: EXT8001 off-hook > input **002008# > *851 10 02 18 7# > *852 14 30#
30 USERS MANUAL
2.3 Auto or Operator Attendant Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook
du
Hello,this is miracall company
1 2 1 # begin record Please dial extension number,
8002 for sales,8003 for purchase after 15seconds
welcome msg.
du
1 2 2 # begin record
Hello,the extension you dialed
is busy now, please try another after 8 seconds
busy msg.
du
1 2 3 # begin record
Hello,no one pick up the call,pls.
try later or dial another number after 8 seconds
no-answer msg.
On-hook
*12 L # : L = 1,2,3 means you can record total 3-level message for the PBX, including
welcome message, when busy message, no-answer message.
Total message duration is 30seconds, 15s for level 1, 8s each for level 2 and 3;
It will auto-cover the old message if you try to record again.
USERS MANUAL 31
2.3 Auto or Operator Attendant Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook
1 3 1 # du
Hello,this is miracall company
Please dial extension number,
8002 for sales,8003 for purchase after 15seconds
1 3 2 # du
Hello,the extension you dialed
is busy now, please try another after 8 seconds
1 3 3 # du
Hello,no one pick up the call,pls.
try later or dial another number after 8 seconds
On-hook
*13 L # : L = 1,2,3 . This is to test the messages you recorded that you can play from the
handset to view quality of message record;
You can enable the Auto-attendant mode for system after record well.
32 USERS MANUAL
2.3 Auto or Operator Attendant Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
1 0 # or 1 0 C O #
01~16
outside line port
On-hook
After setting, all incoming call will be routed automatically by PBX message, the Caller
can dial to the desired extension directly without consultation with Operator or reception.
USERS MANUAL 33
2.3 Auto or Operator Attendant Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
1 5 A B C D #
1st Reception 8001
du
1 6 a b c d #
2nd Reception 8002
On-hook
Situation 1: During welcome message playing, Incoming Caller dial 0,then the call will
be routed to first reception 8001;
If 8001 is busy, then call will be routed to 2nd reception 8002. If both receptions
are busy,then system will play Busy Message.
Situation 2: If intercom call to 1st Reception 8001 and busy then route to 2nd Reception
8002,If both are busy, then the intercom caller will hear busy tone only.
34 USERS MANUAL
2.3 Auto or Operator Attendant Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
1 1 # or 1 1 C O #
01~16
outside line port
On-hook
After setting, the incoming calls will be received and routed by Operator or reception
by hand manually.
USERS MANUAL 35
2.3 Auto or Operator Attendant Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
Delete the 2 1 C O #
old ringing 01~16
extension outside line port
du
2 2 C O a b c d #
01~16 New ringing extension
outside line port
On-hook
In Operator-attendant mode, you can select which extension to ring for the incoming calls;
In factory setting, incoming calls from all Outside Line port will ring to EXT8001 & 8002;
36 USERS MANUAL
2.3 Auto or Operator Attendant Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
1st Day/Night 7 7 H H M M h h mm Q #
Start Hour/Minute End Hour/Minute Attendant mode select
du
2nd Day/Night 7 8 H H M M h h mm Q #
Start Hour/Minute End Hour/Minute Attendant mode select
On-hook
You can set two different Day/Night time, such as 1st for Morning, 2nd for Afternoon,
HHMM : Hour/minute ,for the start time ; hhmm : hour/minute, for the end time;
Q : 0 or 1 (The attendant mode selection , 0: Operator mode; 1: Auto-attendant mode)
How to set 8:30AM to 12:00 and 1:30 PM to 5:30 PM is in Operator mode, other time is
auto-attendant mode? (24-hour format)
Program: EXT8001 off hook > **002008# > *77 0830 1200 0 # > *78 1330 1730 0 #
USERS MANUAL 37
2.3 Auto or Operator Attendant Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
Cancel 7 7 #
1st Day/Night
du
Cancel 7 8 #
2nd Day/Night
On-hook
38 USERS MANUAL
2.3 Auto or Operator Attendant Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
1st Date 7 9 1 WQ #
Date/week:1~7 Attendant mode select
du
2nd Date 7 9 2 W Q #
Date/week:1~7 Attendant mode select
On-hook
You can set two different Date/week time, such as Saturday and Sunday;
How to set Saturday and Sunday in Auto-attendant mode, other time is Operator mode?
To Program: EXT8001 off hook > **002008# > *791 6 1 # > *792 7 1 #
After setting , then the same day, Auto Day/night switch will be invalid in Miracall PBX.
USERS MANUAL 39
2.3 Auto or Operator Attendant Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
Cancel 7 9 1 #
1st Date/week
du
Cancel 7 9 2 #
2nd Date/week
On-hook
40 USERS MANUAL
2.3 Auto or Operator Attendant Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
Cancel all 7 9 3 #
On-hook
USERS MANUAL 41
2.4 Outside Line Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
du
On-hook
U : 1~ 8 (Outside line port number, for 1st outside line card or for TAD ,TK-848 series );
V : 1 or 8 ( Outside line port number, only used for model TK-1696 & TK-16128)
*41# : to disable all Outside line port for TAD-632 or TK-848 PBX,
or to disable 1~8 Outside line port for TK-1696,TK-16128 PBX (1st CO card);
*42# : to disable 9~16 Outside line port for TK-1696,TK-16128 PBX (2nd CO card);
*4# : to disable all Outside line port for all model PBX;
This code should be used when theres no line connect to the outside port.
Example: TAD-632 outside port 1~4 connect line, 5 & 6 do not connect:
to Program: EXT8001 off-hook > **002008 > *41 1234#
42 USERS MANUAL
2.4 Outside Line Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
3 1 C O A B C D #
01~16 Extension
outside line port
On-hook
You can restrict extension can only select specific outside line port to make outgoing call;
USERS MANUAL 43
2.4 Outside Line Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
3 2 C O A B C D #
01~16 Extension
outside line port
On-hook
Max. 4 extensions can be assigned to 1 outside line exclusively. Other extension can not
use this Miracall exclusive line.
44 USERS MANUAL
2.4 Outside Line Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
3 8 C O Q #
01~16 Groups:0~9
outside line port
On-hook
Allow you to assign outside lines into different group, the extensions can not use the outside
lines in different group, but incoming call can be transferred to different group;
USERS MANUAL 45
2.5 Extension Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
3 7 A B C D Q #
Extension Groups:0~9
On-hook
Allow you to assign outside lines into different group, the extensions can not use the
outside lines in different group, but incoming call can be transferred to different group;
In factory setting, all extensions are in group 0 .You can select to pick up the ringing
extension in same group or in different group. This is related with different code.
EXT8001 off hook > **002008# > *37 8003 1 # > *37 8004 1 # >*37 8005 1 #
> *37 8007 2 # > *37 8008 2 #
46 USERS MANUAL
2.5 Extension Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
Prefixed number 1~8 du
prefixed number 5 2 P e f g h #
& digit-number Extension 2,3 or 4
digit-number length
New extension 5 a b c A B C D #
number
Extension port New extension number
number
On-hook
You can change the old extension number and create new one.
Extension number can not be the same , and new extension number is selectable among
10 ~ 8999 ,but can not be 1-digit like 1,2,3 and start with 0 or 9 like 008,900.
To check the physical port number in some extension, please use code #*9
USERS MANUAL 47
2.5 Extension Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
Toll restriction 01 6 1 A B C D S #
Class of service 0~9
Extension number
du
6 2 A B C D S #
Toll restriction 02
Class of service 0~9
Extension number
du
6 7 e f g h P #
Prefixed number
Prefixed number group 1~9
Prefixed digit of corresponding to Class of service
telephone number
On-hook
Allow you to set Toll Restriction for extensions that get permit to dial or can not dial some
numbers,such as DDD,IDD or only allow intercom call etc.
*62ABCDS# : the 2nd choice to set the Toll Restriction class for extension ABCD ;
S : 0 ~ 9 ( Toll class of service : 0 - Only allow intercom call ;
1~ 6- Can not dial the telephone numbers which starting with prefixed
number at Prefixed number group 1~6 (P); 7~ 9- Can dial the telephone
numbers which starting with prefixed number set at Prefixed number group
7~9 (P);
;
*64S# : the code to set Toll restriction service class for all extensions at same time;
*65S# : the second code to set Toll restriction class for all extensions at same time;
For each group allow to add max. 20 different prefixed digits; add # if less 4 digit-no.
The prefixed digit will be restricted with corresponding to Toll restriction class, such as
prefixed digit group 1 with corresponding to Toll service class 1 , P2 with S2, P3
with S3 etc.
For example: you can set prefixed IDD 00 in P4 , and set extension ABCD at S4, so
extension ABCD can not dial international IDD call.
To Program: EXT8001 off-hook > **002008 > *67 4 00# > *61 ABCD 4 #
USERS MANUAL 49
2.5 Extension Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
Cancel restriction 6 3 A B C D # or 6 3 #
Extension number Cancel all
On-hook
50 USERS MANUAL
2.5 Extension Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
Cancel restriction 6 7 P #
Prefixed number group 1~9
corresponding to Class of service
On-hook
USERS MANUAL 51
2.5 Extension Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
duration 8 1 A B C D m n # or 8 3 m n #
Extension number 01~60 Set for all extensions
minutes
On-hook
At last minute, you will hear du-du-du alert every 15 seconds, after 4 times alert, the
line will be cut off automatically;
Example: to restrict 5minutes conversation time for EXT8018 and 15min. for EXT8020
to Program : EXT8001 off-hook > **002008# > *81 8018 05 # > 81 8020 15#
52 USERS MANUAL
2.5 Extension Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
to cancel 8 2 A B C D # or 8 3 #
Extension number Cancel for all extensions
On-hook
USERS MANUAL 53
2.5 Extension Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
7 0 0 #
du
to cancel 7 2 A B C D r # or
All extensions direct-route
Extension number
7 1 0 #
Route-out type
On-hook
If dial 0 and all outside lines are occupied ,then the extension will switch to intercom
automatically in Miracall PBX;
54 USERS MANUAL
2.5 Extension Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
to cancel 8 4 A B C D # or 8 4 #
Extension number Reset for all extensions
On-hook
USERS MANUAL 55
2.5 Extension Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
to cancel 3 9 A B C D z #
Extension number Authority: 0 or 1
On-hook
z = 0: not allow
= 1 : allow
56 USERS MANUAL
2.6 Special Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
8 7 G X C O #
Group Outside 1ine
port 01~16
Route digit 1~7
On-hook
*87GXCO # : allow you to select which least-cost outside line to make calls ;
G = 1 or 2 (means you can set max. 2groups route digit);
X = 1~7 (the digit for extension users to dial then route automatically
to outside least-cost lines) ;
CO = 01 ~16 (outside line ports);
1. If the digit of 1~7 is selected as the LCR route, then this digit can not be as the prefixed
number for Extension Flexible Numbering.
2. The LCR lines should be connected after the ordinary lines. When user dial 0, system
will select the idle ordinary lines to call out, then to select LCR lines;
3. The LCR lines can only be selected by extensions in same Extension Group.
USERS MANUAL 57
2.6 Special Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
8 7 G #
Group : 1 or 2
On-hook
58 USERS MANUAL
2.6 Special Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
7 3 F L S H #
Flash time 760~2000ms
On-hook
*73FLSH # : this setting is related with Call Transfer which should flash the hook-
switch to transfer the call to other party;
FLSH : 760~2000ms (flash time ,mostly choose 760ms as standard in Miracall PBX);
USERS MANUAL 59
2.6 Special Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
7 5 0 m n #
Delay time: 10~60seconds
to cancel Reversal billing mode
7 5 1 #
On-hook
*750mn # : allow you to select the SMDR billing to Time-delay charge mode;
mn: 01~60seconds (time-delay duration)
*751# : allow you to select the SMDR billing to Time-delay charge mode. This mode
is related with local Telephone Carrier service.
60 USERS MANUAL
2.6 Special Program
du
Extension 8001 0 0 2 0 0 8 #
Off-hook System Password
du
8 6 0 0 #
On-hook
*8600 # : allow you to clear the SMDR billing call logs which stored at computer;
2. When computer shut off or without power, the call logs can still be saved;
3. This code will delete the call logs forever, can not be recovered .
4. You can export the billing call logs in fixed time weekly.
USERS MANUAL 61
Section 3
Appendix
62 USERS MANUAL
3.1 System Factory Setting List
USERS MANUAL 63
3.2 Program Quick Reference
64 USERS MANUAL
3.2 Program Quick Reference
USERS MANUAL 65