Professional Documents
Culture Documents
Darwin, Australia
FEATURES:
Colour pigmented finish
Wide range of facial designs
Low maintenance
FONTANA
LASTING IMPRESSIONS WITH EVERY STEP
Durable and non-slip surface
FEATURES: APPLICATIONS:
APPLICATIONS: Shot-blasted finish Pool decks
Pool decks Granolithic finish Park and garden landscapes
Patios Low maintenance Patios
E-gate, Penang
Jogging and bicycle tracks Durable and non-slip surface Jogging and bicycle tracks
Pedestrian malls Pedestrian malls
Driveways Driveways
Walkways Walkways
Car Porch
Tolerance:
The thickness of the paving slab shall be 5mm.
CABANA TOFANA
PAVING FOR TODAYS URBAN HABITAT
THE NATURAL BEAUTY OF CHIPPED STONE
FEATURES: APPLICATIONS: Dimension (mm) : *300 X 300
Honed (Grind) finish Internal flooring Thickness (mm) : 28
Coverage (pcs/m2) : 11.11
Low maintenance Covered walkways
CA-M1-104 CA-M1-105
Variety of colour stone Patios Dimension (mm) : 400 x 400
Tolerance:
Thickness (mm) : 40
chippings (upon request) Driveways Coverage (pcs/m2) : 6.25
The thickness of the paving
slab shall be 5mm-10mm.
Granolithic finish Wall cladding
Dimension (mm) : *400 x 600
*Non-standard sizes are
Thickness (mm) : 40
subject to a minimum
Coverage (pcs/m2) : 4.16
quantity of 3000m2 per order.
CA-M1-601 CA-M1-602
FEATURES: APPLICATIONS:
Natural stone chipping and Pool decks
pebble finish Park and garden landscapes
Various and imported colour Patios
stone chippings (upon request) Pedestrian malls
Blends with nature Driveways
Walkways
Tolerance:
The thickness of the paving slab
shall be 5mm.
TO-M9-324-N03 TO-M2-202-N05 TO-M3-704-N03
*Non-standard sizes are subject
to a minimum quantity of 3000m2
per order.
FEATURES:
SLABS
MORE THAN SURFACE BEAUTY
Shot-blasted and honed finish
Low maintenance
BRAILLE SLAB
Durable and non-slip surface
Ribbed and dotted paving
provides guidance for the
APPLICATIONS:
visually impared
SP-M9-203-N00 SP-M9-203-N03 SP-M9-203-N26 Pool decks
Non-slip performance for
Park and garden landscapes
safe footing
Patios
Durable under all outdoor
Jogging and bicycle tracks
conditions
Pedestrian malls
Neutral colours blend
Driveways
seamlessly with other
Walkways
surfaces, regardless of
SP-M9-804-P18 SP-M10-204-P02 colour or design
Dimension (mm) : 400 x 400
Thickness (mm) : 40
Coverage (pcs/m2) : 6.25 Dimension (mm) : *300 x 300
Thickness (mm) : 28
Tolerance: Coverage (pcs/m2) : 11.11
The thickness of the paving slab
shall be 5mm. Dimension (mm) : 400 x 400
Thickness (mm) : 40
Coverage (pcs/m2) : 6.25
Jalan Kia Peng, Kuala Lumpur
DF-M10-704-PO5
Tolerance:
The thickness of the paving
slab shall be 5mm.
FL-M32-P02 FL-M32H-N00
FL-M33H-N00 FL-M33-P02
Sunway Pyramid, Oasis Boulevard, Selangor Jalan Kia Peng, Kuala Lumpur
ST CEMENT MORTAR METHOD SAND BEDDING METHOD SPECIFICATIONS
BLINK
TE
LA
SCREED BEDDING
These specifications set out the requirements for Colour
compressed concrete paving slabs. They are recommended The colour configuration shall conform as close as
for use in public areas which are subject to pedestrian and
EUROTILES
practicable to the sample batch colour
light vehicular traffic. Transverse Strength
The minimum 28 days transverse strength shall be 4N/mm2
RAW MATERIALS USED Water Absorption
Cement Water absorption on paving slab surface shall be less than
STEP 1: A prepared concrete STEP 2: W
et cement mortar STEP 1: A well compacted STEP 2: A
30mm well i. Ordinary Portland Cement 0.4g/cm2, while total absorption shall be less than 8%
base. bedding of 20mm to crusher-run base is compacted sand bedding
SPARKLING IMPRESSIONS 30mm to be laid on the required. is then laid on the - MS 522 : 2003 Compressive Strength
concrete base to receive crusher-run base. ii. White Portland Cement 45 MPA
Eurotiles. - MS 888 : 1991 (Tested on 100mm X 100mm X 40mm cut sample)
FEATURES: Colour Pigment - Colour pigment: BS 1014 Skid Resistance - 65
Blink eurotiles contain a Aggregates - 5mm aggregates: BS 882 (Except for Tofana Series)
crystal cullet mixture to Sand - Washed: BS 1119
Additives - To the manufacturers requirement
create a light sparkling effect
Natural stone chipping and
EFFLORESCENCE (Secondary)
PHYSICAL PROPERTIES
pebble finish Tolerances This superficial phenomenon is commonly found in most
STEP 3: S
prinkle dry cement STEP 4: E
urotiles is then STEP 3: E
urotiles is then STEP 4: F
ine sand is then
Various and imported colour on the surface of the placed on the top of placed on the top of spread on top of the The tolerance of any single paving slab shall be concrete-based or cementitous products. However, this
stone chippings (upon request) wet cement mortar wet cement mortar the compacted sand pavement and swept - Cabana/Dual Finish 5mm efflorescence effect will disappear over time (weathering)
bedding before placing bedding. bedding. into the joints. - Visually Impaired Slabs/Florana 5mm whereby rain usually washes the efflorescence away in
Blends with nature Eurotiles.
- Fontana/Tofana 5-10mm about six months to a year and in the worst scenario could
Length and Width take two years.
APPLICATIONS:
The length and width of any single paving slab shall be
Pool decks within 1.5mm of the specified dimensions
Park and garden landscapes
Patios
Pedestrian malls
Driveways
INSTALLATION METHOD
STEP 5: Pavement is STEP 5: Pavement is
Walkways completed. completed.
CEMENT MORTAR METHOD SAND BEDDING METHOD
Information contained within this brochure is correct at the time of printing (May 2012). Colours shown are reproduced as close to the actual colours as printing technology allows.
Measurements are approximate. While every reasonable care has been taken in prepraring this brochure, we cannot be held responsible for any inaccuracy.