You are on page 1of 1

SCHEDULE OF FINISHES

Walls
Footings 230x600mm in medium strength concrete to NBR standard and SANS
10400. Walls are built with 90mm bricks - heights as per plan. External walls to
plastered and painted with 50mm cavity between internal and external skins with 2.5
butterfly wire ties per square meter. All internal walls plastered with lime cement.
Brickforce in 4 layers over all openings, with precast concrete lintels to openings
greater than one metre.
26.5
ROOF PITCH Window-sills
External & Internal, smooth finished cement plaster.

1,727
300 300 Roof Construction
Cement roof tiles @ 26.5 pitch on 38x38 SAP battens at maximum 320 centres on
prefabricated gangnail trusses at maximum 760 c/c, fixed to 114x38 wallplates and
4,277
PLASTER & anchored to brickwork with 30x2mmx1m hoop iron ties, built into walls for minimum of
DPC
PAINT 600mm. SABS approved underlay to tiled roof. All roof timber to be minimum Grade
NGL 5 SA Pine TAN treated. All gable ends to be tied with hoop iron built into wall for
minimum 600mm and up to two trusses away from gable to SANS 10400-L where
2,550

ELEVATION 1 applicable. Bracing as per A19 Engineer.


SCALE 1:100
Eaves
300mm Open eaves overhang with 225mmx10mm painted fibre cement fascias.
LOUNGE BATHRM
DPC DPC Rainwater Disposal
250mic DPM 400x200 Alu. gutters with 75mm PVC downpipes as per plan.
375mic DPM UNDER ALL WALLS
THICKENED
MINIMUM 150mm ABOVE FGL
FOUNDATION Ceilings
600x230 600x230 25mm Isoboard EPS ceiling on 38 x 38 SA Pine battens at 300mm spacing and 76mm
SECTION A-A Rhino cornice with 155mm thick flexible polyester blanket(Isotherm).
SCALE 1:100
Floors
Finished as per plan and/or client choice/building tender, on 25mm screed, on 80mm
concrete for ground storey, (as above) on 250 micron waterproof sheeting, on
compacted filling and sand blinding. All floor levels to be a minimum of 150mm
above FGL.
3
Doors & Windows
PLASTER & PAINT Windows top-hung aluminium, as per plan codes & elevations.
Note : Safety glass to window panes larger than 1sq.m or closer than 500mm from
6,400
230 90 230 ELEVATION 2 FFL to SANS 10137 and to comply to SANS 10400-N.
3,140 2,710 SCALE 1:100
Drainage
230 90 90 230 110mm Smooth uPVC Sewer pipe with minimum 1:60 fall with IL at minimum
3,140 910 1,710 450mm. 50mm 2way vent valve on start of one pipe sewer system. All sewer lines
4,370 900 1,130 passing under structure to comply to SANS 10400-PP24 (encase in sand or
W6 concrete). All drainage to comply to SANS 10400-P.
(900x1100)
230

230

230 Electricals - as per building tender.


Position of Oostersee Electrical connection box on exterior wall to be determined on
960

BEDRM 2 site.
(1200x1200)

(Carpet)
NOTES:
2,250

BEDRM 1 Figured dimensions takes preference to scaled dimensions.


1,200
W2

3,160

2,840

(Carpet) All relevant levels and dimensions to be verified on site prior to construction.
3,270

All work to comply to NBR, Local Bylaws and Municipal Regulations.

All levels to be determined on site and can/may be to adjusted to the descrepancy


4
90

2 of the developer and his appointed builder. Developer to approve plan prior to
PLASTER & PAINT submission to council.
(600x900)

90

B.I.C All glazing to SANS 10137 & SANS 10400-N. Printed dimensions take prference over
2,690

ELEVATION 3
W3

600

BATH RM scaled dimensions. All work to be carried out in strict accordence to NBR and local
90

bylaws.
7,830

7,830

A TV (Tiles) A SCALE 1:100


2,030

50
Finishes in builders contract takes preference over finishes specified on plan.
HWC IN
ROOF

VP
In case of discrepances the author of the plan should be contacted before
4,430
2,170

proceeding with any construction.


(1200x1200)

90
1,200
4,010

W2

LOUNGE
(Tiles)
2,320
900

KITCHEN
1,780

PD26 (Tiles)
230
1,000

WM
600
230

230

W6 W5
(900x1100) (900x900)
485 37 VAN DER STEL STREET P.O. BOX 1399 TEL: 021 906 6770
1,215 900 1,215 900 900 785 KUILSRIVER KUILSRIVER FAX: 021 906 6775
230 90 230
ELEVATION 4 7579 7580 EMAIL : nationhousing@mweb.co.za
4,140 1,710 SCALE 1:100
230 230 230 230 ELECTRICAL HOUSE PLAN- Type 3-50 sq.m DATE : AUG 2016
2,870 900 1,710
TELEPHONE POINT
PROPOSED NEW DWELLING DRAWING : Type 3-50sq.m
6,400 CEILING LIGHT POINT MONTCLAIR
FOR ......... ON ERF ...... , PROJECT : NATION HOUSING
1 SANS 10400-XA WATERPROOF LIGHT POINT
15 AMP PLUG POINT
MONTCLAIR SCALE : 1:100
HWC DETAILS:

FLOOR PLAN PIPING 15mm AND 22mm CLASS 1


COPPER TUBE
15 AMP UNDERCOUNTER
MOUNT PLUG POINT
SCALE 1:100 AREA HOUSE : 50.36 sq.m HWC KWIKOT ECONO STD GALV. 150L
GEYSER. 15 AMP PLUG POINT 2000mm HIGH
WALLS EXT. 230 CAVITY LAGGING (R=1) ON ALL EXPOSED PIPES
1200mm HIGH PC WALL DISTRIBUTION BOARD
INT. 90 x 190 mm W2= (1.2x1.2)x2 = 2.88 sq.m
BUILDING LINES TV TV POINT
W3= 0.6x0.9 = 0.54 sq.m
RAINWATER CHANNEL NOTE: W5 = 0.9 x 0.9 = 0.81 sq.m
RAINWATER D.P. DP FFL ABOVE NGL TO BE W6= (0.9x1.1) x 2 = 1.98 sq.m STOVE CONNECTION
TOTAL = 6.21 sq.m
110mm PVC SEWER DETERMINED ON SITE. FLOOR AREA : 50.36 sq.m
MINIMUM 150mm. BALL FITTINGS TO ALL LIGHT POINTS
AT 1:40 GRADIENT FENESTRATION PERCENTAGE : 12.33 %

You might also like