www.wilkerdos.com Copyright 2017, April Wilkerson Cut List - Table Part ID Part Description Material QTY Length A Top Board 2x6x6 5 72 B Table Batten 2x4x8 2 27 1/2 C Table Leg 2x6x8 4 30 D Table Leg Support 2x6x8 2 32 1/2 E Table Brace 2x4x8 2 25 15/16 F Table Cleat 2x4x8 2 22
Copyright 2017, April Wilkerson
Cut List for 2 Benches Part ID Part Description Material QTY Length G Bench Top Boards 2x6x6 4 72 H Bench Leg 2x4x8 8 17 7/8 I Bench Batten 2x4x8 4 11 J Bench Leg Support 2x4x8 4 14 5/16 K Bench Brace 2x4x8 4 18 3/4 L Bench Cleat 2x4x8 4 11
Copyright 2017, April Wilkerson
Materials List QTY Item Notes 2 2x6x8 Treated Pine 9 2x6x6 Treated Pine 6 2x4x8 Treated Pine 48 x 4 Carriage Bolts Galvanized 48 Washers Galvanized 48 Nuts Galvanized 3 Screws Deck or Exterior Grade
Copyright 2017, April Wilkerson
Cut Diagram
Copyright 2017, April Wilkerson
Table Exploded View
Copyright 2017, April Wilkerson
Build Table Top Start by building the table top by securing the B - Table Batten and the F - Table Cleat to the table top boards. These need to be brought in 4 from the edge.
Copyright 2017, April Wilkerson
Build The Table Legs Cut and attach the leg assembly. Tip: If you work with the table upside down at this point, it will be easier to build.
Attach each leg using four
carriage bolts. Two into the B - Table Batten, and two into the D - Table Leg Support.
Copyright 2017, April Wilkerson
Install The Leg Brace Cut and secure a diagonal member that goes from the D - Table Leg Support to the F- Table Cleat.
Copyright 2017, April Wilkerson
Table is Finished Now the table portion of the build is finished. If you used treated wood, let the wood fully dry out before trying to paint it.
Copyright 2017, April Wilkerson
Bench Exploded View
Copyright 2017, April Wilkerson
Build The Bench Top The removeable benches are made the same way as the table. Start by cutting the top and attaching the cleats to the underside.
Copyright 2017, April Wilkerson
Attach The Bench Cleat The I - Bench Battens are 4 in from the edge.
Copyright 2017, April Wilkerson
Build The Bench Legs Assemble the leg assembly the same as the table, with four carriage bolts per leg.
Copyright 2017, April Wilkerson
Attach The Brace Now attach the diagonal brace and you are done.