Professional Documents
Culture Documents
www.vishay.com
Vishay Semiconductors
High Speed Optocoupler, Single and Dual, 10 MBd
FEATURES
Single channel
Choice of CMR performance of 15 kV/s,
NC 1 8 V 5 kV/s, and 1000 V/s
CC
A 2 7 V
E
High speed: 10 MBd typical
C 3 6 VO +5 V CMOS compatibility
Pure tin leads
NC 4 5 GND
Guaranteed AC and DC performance over
6N137, VO2601, VO2611 temperature
Meets IEC 60068-2-42 (SO2) and IEC 60068-2-43 (H2S)
Dual channel
requirements
A1 1 8 VCC
Low input current capability of 5 mA
C1 2 7 V
O1 Material categorization: for definitions of compliance
C2 3 6 V
please see www.vishay.com/doc?99912
O2
A2 4 5 GND APPLICATIONS
VO2630, VO2631, VO4661 Microprocessor system interface
PLC, ATE input / output isolation
Computer peripheral interface
Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS
DESCRIPTION
High speed A/D and D/A conversion
The 6N137, VO2601, and VO2611 are single channel AC plasma display panel level shifting
10 MBd optocouplers utilizing a high efficient input LED
Multiplexed data transmission
coupled with an integrated optical photodiode IC detector.
The detector has an open drain NMOS-transistor output, Digital control power supply
providing less leakage compared to an open collector Ground loop elimination, noise isolation
Schottky clamped transistor output. The VO2630, VO2631,
and VO4661 are dual channel 10 MBd optocouplers. For the AGENCY APPROVALS
single channel type, an enable function on pin 7 allows the UL1577
detector to be strobed. The internal shield provides a cUL
guaranteed common mode transient immunity of 5 kV/s for DIN EN 60747-5-5 (VDE 0884-5) available with option 1
the VO2601 and VO2631 and 15 kV/s for the VO2611 and BS EN 60950-1
VO4661. The use of a 0.1 F bypass capacitor connected
CQC GB8898-2011, GB4943.1-2011
between pin 5 and 8 is recommended.
ORDERING INFORMATION
DIP-8 Option 6
V O 2 6 0 1 - X 0 # # T
7.62 mm 10.16 mm
PART NUMBER PACKAGE OPTION TAPE
AND Option 7 Option 9
REEL
CHANNELS 1 CHANNELS 2
AGENCY CERTIFIED/PACKAGE
CMR (V/s) CMR (V/s)
BSI, UL, cUL 1000 5000 15 000 1000 5000 15 000
DIP-8 6N137 VO2601 VO2611 VO2630 VO2631 VO4661
DIP-8, 400 mil (option 6) 6N137-X006 VO2601-X006 VO2611-X006 VO2630-X006 VO2631-X006 VO4661-X006
SMD-8 (option 7) 6N137-X007T VO2601-X007T VO2611-X007T VO2630-X007T VO2631-X007T VO4661-X007T
SMD-8 (option 9) 6N137-X009T - - VO2630-X009T - -
VDE, BSI, UL, cUL 1000 5000 15 000 1000 5000 15 000
DIP-8, 400 mil (option 6) - VO2601-X016 VO2611-X016 - VO2631-X016 -
SMD-8 (option 7) - VO2601-X017T VO2611-X017T - VO2631-X017T -
100 30
Output
20
60
15
40
Input
10
20
5
0 0
0 25 50 75 100 125 0 25 50 75 100 125
Tamb - Ambient Temperature (C) Tamb - Ambient Temperature (C)
Fig. 1 - Total Power Dissipation vs. Ambient Temperature Fig. 3 - Forward Current vs. Ambient Temperature
(single channel) (single channel)
Ptot - Total Power Dissipation (mW)
100 30
Output 20
60
15
40
Input
10
20
5
0 0
0 25 50 75 100 125 0 25 50 75 100 125
Tamb - Ambient Temperature (C) Tamb - Ambient Temperature (C)
Fig. 2 - Total Power Dissipation vs. Ambient Temperature Fig. 4 - Forward Current vs. Ambient Temperature
(dual channel) (dual channel)
SWITCHING CHARACTERISTICS
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Propagation delay time to high tPLH 20 48 75 (1) ns
RL = 350 , CL = 15 pF
output level tPLH - - 100 ns
Propagation delay time to low tPHL 25 50 75 (1) ns
RL = 350 , CL = 15 pF
output level tPHL - - 100 ns
Pulse width disortion RL = 350 , CL = 15 pF |tPHL - tPLH| - 2.9 35 ns
Propagation delay skew RL = 350 , CL = 15 pF tPSK - 8 40 ns
Output rise time (10 % to 90 %) RL = 350 , CL = 15 pF tr - 23 - ns
Output fall time (90 % to 10 %) RL = 350 , CL = 15 pF tf - 7 - ns
Propagation delay time of RL = 350 , CL = 15 pF,
tELH - 12 - ns
enable from VEH to VEL VEL = 0 V, VEH = 3 V
Propagation delay time of RL = 350 , CL = 15 pF,
tEHL - 11 - ns
enable from VEL to VEH VEL = 0 V, VEH = 3 V
Notes
Over recommended temperature (Tamb = -40 C to +100 C), VCC = 5 V, IF = 7.5 mA unless otherwise specified. All typicals at Tamb = 25 C,
VCC = 5 V.
(1) 75 ns applies to the 6N137 only, a JEDEC registered specification
Pulse gen.
Z0 = 50
tf = tr = 5 ns VCC
IF Dual channel
1 VCC 8
RL Output VO
Input 2 7 monitoring
monitoring
0.1 F node
node
3 6 bypass
RM CL= 15 pF
4 5
GND
18963-5
1 VCC 8 RL
3V
7.5 mA VE Output VO Input VE 1.5 V
2 7 0.1 F monitoring
IF VOUT tEHL
bypass node
3 6 tELH
CL = 15 pF Output VO
4 5 1.5 V
GND
VCC
IF Single channel
Fig. 8 - Single Channel Test Circuit for Common Mode Transient Immunity
IF
Dual channel
B VCC
1 VCC 8
A RL
Output VO
2 7
monitoring
0.1 F node
VFF 3 6 bypass
4 5
GND
VCM
+ -
Pulse generator
18977-1 Z O = 50
Fig. 9 - Dual Channel Test Circuit for Common Mode Transient Immunity
1.7 1.60
1.55
1.6
VF - Forward Voltage (V)
1.50
1.5 1.45
1.4 IF = 20 mA 1.40
1.35
1.3
1.30
IF = 10 mA
1.2 1.25
IF = 1 mA 1.20
1.1
1.15
1.0 1.10
-40 -20 0 20 40 60 80 100 0 5 10 15 20 25 30 35 40 45 50
Tamb - Ambient Temperature (C) 17611 IF - Forward Current (mA)
Fig. 10 - Forward Voltage vs. Ambient Temperature Fig. 11 - Forward Voltage vs. Forward Current
6
IR - Reverse Current (nA)
2.7
5 2.6
RL = 350
4 2.5
3 VR = 5 V
2.4
2 2.3 RL = 1 k
1 2.2 RL = 4 k
0 2.1
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
17613-1 Tamb - Ambient Temperature (C) 17616 Tamb - Ambient Temperature (C)
Fig. 12 - Reverse Current vs. Ambient Temperature Fig. 15 - Input Threshold On Current vs. Ambient Temperature
ICCI - Low Level Supply Current (mA)
4.0
3.5
2.5
3.0 VCC = 7 V
VCC = 5 V IF = 10 mA 2.4
2.5 IF = 10 mA RL = 350
2.0 2.3
1.5
2.2
1.0 RL = 1 k
2.1
0.5 RL = 4 k
0.0 2.0
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
17614 Tamb - Ambient Temperature (C) 17617 Tamb - Ambient Temperature (C)
Fig. 13 - Low Level Supply Current vs. Ambient Temperature Fig. 16 - Input Threshold Off Current vs. Ambient Temperature
ICCH - High Level Supply Current (mA)
3.5 0.30
VCC = 5.5 V IL = 16 mA
VCC = 7 V IF = 5 mA
3.4 IF = 0.25 mA 0.25 IL = 13 mA
3.3
0.20
3.2 VCC = 5 V
IF = 0.25 mA 0.15
3.1 IL = 10 mA
0.10
3.0
IL = 6 mA
0.05
2.9
2.8 0.00
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
17615 Tamb - Ambient Temperature (C) 17618 Tamb - Ambient Temperature (C)
Fig. 14 - High Level Supply Current vs. Ambient Temperature Fig. 17 - Low Level Output Voltage vs. Ambient Temperature
40 80 tPLH, 1 k
tPLH, 350
30 60
20 40
tPHL, 350
tPHL, 1 k
10 20
tPHL, 4 k
0 0
-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
17619 Tamb - Ambient Temperature (C) 17622 Tamb - Ambient Temperature (C)
Fig. 18 - Low Level Output Current vs. Ambient Temperature Fig. 21 - Propagation Delay vs. Ambient Temperature
IOH - High Level Output Current (nA)
50 120
Fig. 19 - High Level Output Current vs. Ambient Temperature Fig. 22 - Propagation Delay vs. Forward Current
5.5 50
PWD - Pulse Width Distortion (ns)
5.0
RL = 4 k
Vo - Output Voltage (V)
4.5 40
4.0
3.5
30
3.0
2.5
20
2.0
RL = 350 RL = 1 k
1.5
1.0 RL = 1 k 10
RL = 350
0.5 RL = 4 k
0.0 0
0 1 2 3 4 5 -40 -20 0 20 40 60 80 100
17621 IF - Forward Input Current (mA) 17624 Tamb - Ambient Temperature (C)
Fig. 20 - Output Voltage vs. Forward Input Current Fig. 23 - Pulse Width Distortion vs. Ambient Temperature
60 300
PWD - Pulse Width Distortion (ns)
tr, RL = 4 k
Fig. 24 - Pulse Width Distortion vs. Forward Current Fig. 26 - Rise and Fall Time vs. Forward Current
300 60
250 50
tELH = 4 k
200 40
Fig. 25 - Rise and Fall Time vs. Ambient Temperature Fig. 27 - Enable Propagation Delay vs. Ambient Temperature
3.10 0.25
9.75 0.15 6.70 0.15
0.95 0.20
3.55 0.20
6.00 0.25
0.70 0.20
1.27 0.10
0.50 0.10
2.54 nom. .10
7 typ. 0.25 0
3 x 2.54 = 7.62
8 7 6 5
1 2 3 4
1.27 0.10
8 7 6 5
1 2 3 4
3.55 0.20
0.25 0.10
8.00 min.
8.40 min.
0.70 0.20
1.27 0.10 0.75 0.25
2.54 nom. Leads
coplanarity
3 x 2.54 = 7.62 0.10 max.
Recommended Footprint
8 7 6 5
0.76
R0.250
2.54
1 2 3 4
PIN ONE I.D.
1.78
SMD-8 (option 9)
9.78 0.25
7.62 typ.
10.16 max.
9.75 0.15 6.70 0.15
0.95 0.20
0.25 0.10
3.55 0.20
0.18 0.08
8.00 min.
0.75 0.20
1.27 0.10 Leads coplanarity
2.54 nom. 0.10 max.
3 x 2.54 = 7.62
Recommended Footprint
8 7 6 5
0.76
R0.250
2.54
1 2 3 4
PIN ONE I.D. 1.78
VO2611
V YWW 68
125 0.5
1.0
30 0.5 B
VISHAY OPTOSEMICONDUCTOR MADE IN MALAYSIA ANTISTATIC
Detail B Detail A A
1.0
1.0
3 0.5 1.0
380 1
0.7 0.5 1.0 14 x
13 x 10 = 130 17996-3
DIP-8
12 0.3
B
6 2.7 0.2
1
0.
4.4 0.3
R
11 0.3
5
0.
0.6 0.1
R
10
A Detail A Detail B
// 0.2 B 5.7 0.15
17996-4
Section A - B Not to scale
Fig. 30 - Tube Shipping Medium
5.7
13.6
0.5
ESD sticker
Tape slot
in core
330
(13")
Top cover tape
Regular, special
Embossed carrier or bar code label
Embossment
17998 17999
Fig. 32 - Tape and Reel Shipping Medium Fig. 33 - Tape and Reel Shipping Medium
SMD-8 (option 7)
12.0 (0.472)
12.0 (0.472)
SOLDER PROFILES
300 300
5s
Lead temperature max. 260 C
250 255 C
250 240 C 245 C
235 C to
260 C second full line: typical
wave 217 C
Temperature (C)
Temperature (C)
first wave dotted line: 200
200 process limits
wave
max. 30 s
ca. 200 K/s ca. 2 K/s
150 150
100 C to
130 C max. 120 s max. 100 s
100 100
max. ramp down 6 C/s
2 K/s ca. 5 K/s
50 forced cooling 50 max. ramp up 3 C/s
0 0
0 50 100 150 200 250 0 50 100 150 200 250 300
94 8626 Time (s) 19841 Time (s)
Fig. 36 - Wave Soldering Double Wave Profile According to Fig. 37 - Lead (Pb)-free Reflow Solder Profile According to
J-STD-020 for DIP Devices J-STD-020 for SMD Devices
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customers responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customers
technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.