You are on page 1of 3

INSTALLATION RULES BOOKS We have created study

guides for both Installation


Rules Paper1 and Paper II,
and have as well developed
what we call the exam
simulator software to
facilitate your exam
preparation process.

The focus is on preparing


you for the exams and to
shorten your preparation
time. The study material
offers a self-paced method of
preparing yourself for the
THIS INFORMATION IS MADE exams. You will go through
all the sections of the
POSSIBLE BY: regulation book, but the
great news is that you do not
have to guess which sections
of the book you need to
focus on.

http://www.installationrulesstudymate.co.za Every Module in the study


guide guides you through the
regulation book by
answering questions similar
info@installationrulesstudymate.co.za to the ones you will face in
the exam. The study guides
consists of worked out
calculation examples, a
selection of questions and
answers similar to the ones
you will find on the actual
exam.

All you need to do is go


through the examples and
use your latest standards to
answer the questions in each
module, and finally attempt
as many questions as you
The study material is a no nonsense can that will be generated by
the Exam Simulator
guide for the Installation Rules course. software.
Then, once that is done you
It focuses on the sections most likely to will be ready to take the
be on the actual exam. exam. If you work very hard,
you can pass both papers
with DISTINCTIONS.
INSTALLATION RULES PAPER 1 AND PAPER 2 SANS BOOKS
AVAILABLE FROM SABS
SANS 1507-1 Electric cables with extruded solid dielectric insulation for fixed installations (300/500 V
to 1 900/3 300 V) Part 1: General

SANS 1973-1 Low-voltage switchgear and controlgear ASSEMBLIES Part 1: Type-tested


ASSEMBLIES with stated deviations and a rated short-circuit withstand strength above
10 kA
SANS 10142-1 The wiring of premises Part 1: Low-voltage installations

SANS 10198-2 The selection, handling and installation of electric power cables of rating not exceeding
33 kV Part 2: Selection of cable type and methods of installation
SANS 10292 Earthing of low-voltage (LV) distribution systems

SANS 10313 The protection of structures against lightning

SANS 60439-1 Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially
type-tested assemblies
SANS 62305-1 Protection against lightning Part 1: General principles

SANS 62305-2 Protection against lightning Part 2: Risk management

SANS 62305-3 Protection against lightning Part 3: Physical damage to structures and life hazard

SANS 62305-4 Protection against lightning Part 4: Electrical and electronic systems within structures

OHS ACT EIR AND ELECTRICAL MACHINERY REGULATIONS

You might also like