Professional Documents
Culture Documents
As Table or Tower
As Individual Prop
Edition 01/2011
PERI GmbH
Formwork Scaffolding Engineering
P.O. Box 1264
89259 Weissenhorn
Germany
Tel. +49 (0)7309.950 - 0
Fax +49 (0)7309.951- 0
info@peri.com
www.peri.com
Important Notes:
MULTIPROP
2 The lightweight Slab Prop with
patented profile and official construction licence
MULTIPROP System
10 As Table or Tower for up to 90 kN load capacity
14 Components
24 PERI International
1
MULTIPROP
The lightweight Slab Prop with
patented prole and ofcial construction licence
MP 625
4.30 6.25 m
The same prole spacing
allows easy attachement of
the frame to both the inner
and outer tubes.
MP 480
2.60 4.80 m
MP 350
1.95 3.50 m
MP 250
1.45 2.50 m
2
The ingenious aluminium alloy section
elastically withstands the impact
caused by a prop falling over. The shape
is ideal for the chosen material.
3
MULTIPROP
The intelligent and cost-effective solution
The collar still runs freely even Every MULTIPROP comes with 36 mm of adjustment achieved
when the thread is extremely dirty. a built-in measuring tape. with just one revolution (3 times
as much as conventional props).
4
The weight is a crucial factor in
handling.
Aluminium is used to get the weight
down of the MULTIPROP 350 to only
18.8 kg. Therefore one man can erect
and install even the fully extended
MULTIPROP MP 350 with ease. This
makes work safer and avoids fatigue
for improved results on site.
Working safety
The MULTIPROP eliminates the risk of
the type of accidents associated with
conventional props tted with pins. The
MULTIPROP can be adjusted continu- One man can handle the MP 350
ously without having to insert pins, comfortably and safely.
even when partially loaded.
5
MULTIPROP
Accessories for quick forming
Base MP 50
It increases the range of any
MULTIPROP by 50 cm.
Thus for example slabs with a clear
height of up to 4.50 m can be shuttered
quickly and easily with just one prop
such as the MULTIPROP MP 350*.
*with PERI SKYDECK
The Base MP 50 increas- The Base MP 50 can be xed quickly. MRK frames can be used to brace
es the extension range The quick-action clamp coupler makes high MULTIPROPs to achieve the
of props by 50 cm. it possible. necessary stability.
6
Useful accessories supplement PERI
MULTIPROPs to further enhance
their exibility.
SKYDECK Drophead and Prophead The PERI slab system components Forkhead and Clawhead with
with self-locking coupler. that utilise the self-locking coupler self-locking coupler for GT 24 and
t on all props with 40 mm diameter VT 20 Girder at the MULTIFLEX
holes. system.
7
MULTIPROP
Transportation and storage
Pallet
RP 80 x 120, galv.
Item no.: 025640
8
Slab Props
MULTIPROP 250, 350, 480, 625
9
MULTIPROP System
As Table or Tower for up to 90 kN load capacity
Outer tube.
10
14.00 m high MULTIPROP
falsework over an area of
3500 m2.
20 m high MULTIPROP
towers supporting a
cantilevered slab.
11
MULTIPROP System
Easy assembly, simple in use
and reasonable accessories
12
Maximum fall 3 5%
Maximum fall 3 5%
13
MULTIPROP
Item no. Weight kg
MULTIPROP MP min. L max. L
027288 10,300 MULTIPROP MP 120 800 1200
027289 15,600 MULTIPROP MP 250 1450 2500
027290 19,700 MULTIPROP MP 350 1950 3500
027291 25,000 MULTIPROP MP 480 2600 4800
027305 34,800 MULTIPROP MP 625 4300 6250
Slab prop made of aluminium. To be used as indi-
vidual prop, or in combination with MULTIPROP Note
Frames MRK as tower. Construction Approval No.: Z-8.312-824.
Permissible load: see PERI Design Tables.
10
120
64
80
14
40
150
87
max L
0
10
min L
10
L
X
14
MULTIPROP
Item no. Weight kg
MULTIPROP Frame MRK, Aluminium L X
113799 10,900 Frame MRK 180 1720 1800
028460 11,600 Frame MRK 201,5 1935 2015
028360 12,400 Frame MRK 225 2170 2250
028470 12,500 Frame MRK 230 2220 2300
028480 12,700 Frame MRK 237 2290 2370
028490 13,900 Frame MRK 266 2580 2660
028370 14,800 Frame MRK 296 2880 2960
Bracing frame for MULTIPROP. For connecting
to the outer and inner tube. With captive wedge
coupling.
500
L
X
91
1500 / 2250
595
1500 / 2250
595
15
MULTIPROP
Item no. Weight kg
107173 9,000 Ladder Alu 220/350 Technical Data
For access at MULTIPROP towers. To be mounted Extension length 2.20 - 3.50 m.
to the Deck with Hatch.
max 3500
min 2200
65 330
985
48
150
500
42 12,5
89
200
80
16
MULTIPROP
Item no. Weight kg
027297 8,730 Tilting Forkhead MKK
For stable support for single or twin GT 24 or VT
20 Girders. Tilting in any direction by 3. With quick
action clamp coupler.
240 155
170 85 6,5
195
150
80
12,5
max 220
min 120
027296 6,220 Tilting Base MKF
For the use at sloping ground slabs. Tilting in any
direction by 3. With quick action clamp coupler.
38
12,5
max 220
min 120
150
80
140
SW 19
191
191
95
95
70 70
132 132
17
MULTIPROP
Item no. Weight kg
027301 1,020 Connector MPV-2
For connecting 2 MULTIPROPs.
100
80
25
60
12
40
SW 19
M 12
250 50
SW 24
232
18
MULTIPROP
Item no. Weight kg
107161 3,050 Compression Brace Head MP/SRU
Connecting element between MULTIPROPs and
Steel Waler SRU/SRZ.
60 50
242
120 120
Accessories
104031 0,462 Bolt 21 x 120
018060 0,030 Cotter Pin 4/1, galv.
325 48
131
21 52
100
Accessories
104031 0,462 Bolt 21 x 120
018060 0,030 Cotter Pin 4/1, galv.
207
122
6
21
Accessories
018060 0,030 Cotter Pin 4/1, galv.
19
MULTIPROP
Item no. Weight kg
Alu Beam MPB 24 L
079300 24,000 Alu Beam MPB 24, l = 3,00 m 2998
079360 28,800 Alu Beam MPB 24, l = 3,60 m 3598
079420 33,700 Alu Beam MPB 24, l = 4,20 m 4198
079480 38,500 Alu Beam MPB 24, l = 4,80 m 4798
079540 43,300 Alu Beam MPB 24, l = 5,40 m 5398
079600 48,100 Alu Beam MPB 24, l = 6,00 m 5998
Aluminium main beam for the MULTIPROP
system. Note
Permissible load: see PERI Design Tables.
Technical Data
perm. Q = 50 kN
perm. A = 80 kN
perm. M = 15 kNm
80
240
950 48
21
129
Accessories
104031 0,462 Bolt 21 x 120
018060 0,030 Cotter Pin 4/1, galv.
207
122
6
21
Accessories
018060 0,030 Cotter Pin 4/1, galv.
20
MULTIPROP
Item no. Weight kg
018060 0,030 Cotter Pin 4/1, galv.
For pins up to 25 mm.
68
80
70
67
Accessories
018280 1,000 Double Headed Nail l = 65 mm
65 12
8,5
46
13
Accessories
111142 0,082 MULTIPROP Connecting Bolt with Nut
40
SW 19
M 12
21
MULTIPROP
Item no. Weight kg
108213 2,590 Brace Connector MPB 24
For connecting push-pull props or bracing to
Aluminium Beam MPB 24.
22
82
267
14
16,5
205 120
Accessories
104031 0,462 Bolt 21 x 120
018060 0,030 Cotter Pin 4/1, galv.
145 145 45
308
125 125 140
495
Accessories
061260 6,150 Guardrail Post SGP
1768
35 65
22
23
PERI International 42
19
20
22 32 44
34
18
38
11
52
6
21
01 PERI GmbH 5 1
Rudolf-Diesel-Strasse 46
17
89264 Weissenhorn
info @ peri.com 2 30
www.peri.com 3 16
13
29
28
9
53
24 48
4
41
61
33 12
24
44
36
43
7 23
50 51 10
37
39 54
40 57
60 56
49 47 59
58 35 55
66
65
63
14
15
62 26 64
27
31
45
25
25
PERI Product Range
Additional Systems
Safety Systems
Plywood
Formwork Girders
Stopend Systems
Pallets
Transportation Containers
PERI GmbH
Formwork Scaffolding Engineering
P.O. Box 1264
89259 Weissenhorn
Germany
Tel. +49 (0)7309.950-0
Fax +49 (0)7309.951-0
info@peri.com
www.peri.com