Professional Documents
Culture Documents
The S/W option addition and setup methods are explained as an example of using the USB
memory use.
(2) Start Explorer from the Windows start menu, and double-click C:\mainte\mainte.exe to
open the maintenance tool.
37
System Maintenance Work 2
A dialog prompting an option file selection is displayed. Specify drive/path/option file name.
(When the IC memory card is selected, this dialog is not displayed.)
Specify a file and click the "Open" button. The specified file is copied to C:\mainte\, and the
contents of option file is ready to be set in the NC unit.
When the option file having the same file name as that of the specified file already exists in
C:\mainte\, confirmation message for overwriting appears.
Note that when specifying the option file in C:\mainte\, option is set to the NC unit by the file
specified without copying.
Option setting is completed when the display of the "SETTING" button in the option setting
screen turns to normal from the grayed state.
Alarm message appears in the following cases, and the option setting is discontinued.
38
System Maintenance Work 2
2-3-3 Attention for adding S/W option
The state of option setting is changed from <<A>> to <<B>> by adding an option. The following
indicates the transition of the option setting.
Option <<A>>
HD
C:\mainte
(NC serial No.).opt Option <<A>>
Option <<B>>
HD
Renamed
USB memory
and seved
(NC serial No.) .opt C:\mainte
Option <<B>> (NC serial No.).opt Option <<B>>
(NC serial No.).opt.oldOption <<A>>
The latest option file is saved on HD as " (NC serial No.).opt", and the second last option file is
saved as "(NC serial No.).opt .old".
When the option setting is different from the customer intended state by a wrong
purchase/order etc. of the option, return to the state of option <<A>> according to the following
procedures, and confirm the option arrangement again.
39