You are on page 1of 52

PRICE LIST

v a l i d f r o m 01.01.2016
This pricelist replaces all previous pricelist and special agreements.
Valid from 1. January 2016 until further notice.

All products subjected to prior sales and technical alteration.


Misprints and errors expected.

All prices in Euro plus VAT.


INDEX

INFORMATION
AIRFILTER ENGINEERING..................04-05 BOGE..........................................................25
GENERAL INFORMATION....................06-07 CECCATO...................................................26
COMPRESSED AIR FILTERS....................08 COMPAIR...............................................27-28
WATER SEPARATOR.................................09 DELTECH....................................................29
ADSORPTION DRYER..............................10 DOMNICK HUNTER....................................30
COMPATIBLE ELEMENTS + EWO............................................................31
ACCESSORIES...........................................11 FRIULAIR.....................................................32
FST..............................................................33
AFE PRODUCTS HANKISON..................................................33
AFE COMPRESSED AIR FILTERS HIROSS.......................................................34
D-SERIES...............................................12-13 HYDROVANE..............................................34
AFE COMPRESSED AIR FILTERS INGERSOLL-RAND................................35-36
G-SERIES...............................................14-15 KAESER..................................................37-39
WATER SEPARATOR.................................16 KSI...............................................................39
ADSORPTION DRYER / ADSORBER........17 MARK..........................................................40
POINT OF USE-ADSORBER / DRYER.......18 MIKROPOR.................................................40
ELECTRONIC DRAINS + MTA.............................................................41
ADDITIONAL ACCESSORIES..................19 NORGREN...................................................41
ALTERNATIVE REPLACEMENT OMEGA........................................................42
ELEMENTS..................................................20 OMI..............................................................42
ULTRAFILTER........................................43-44
PRICE LIST TO OEM WALKER......................................................45
ABAC...........................................................21 WILKERSON...............................................45
ALMIG..........................................................21 WORTHINGTON.........................................46
ALUP...........................................................22 ZANDER.................................................46-47
ATLAS COPCO ...........................................23
BEA FILTRI.................................................24 ADD ON
BEKO...........................................................24 TERMS & CONDITIONS.............................48
04

AIRFILTER ENGINEERING

The Company

From its humble beginnings in 1993,


Airfilter Engineering has grown and con-
tinues to grow from strength to strength
and is producing products for the treat-
ment of compressed air in its factory in
Shah Alam, Malaysia. Today Airfilter
Engineerings products are sold mainly
through distributors and OEMs in many
different countries in Asia, Europe and
America.

To provide an even better and faster ser-


vice to customers in Europe AFE Airfilter
Europe GmbH was founded in 2007 and
a warehouse and distribution center was
set up in Bornheim/Cologne in Germany.

A research and development (R&D) De-


partment was set up in 1995 to ensure
that new products are introduced and
existing products are continously updat-
ed. Products performance are regularly
monitored and improved, with validation
of these products by independent third
party institute being done periodically.
These milestones are testament to Airfil-
ter Engineerings continued commitment
to improve and innovate in all aspects of
the operations. Since 2002 Airfilter En-
gineering is certified to the ISO9001 by
Lloyds Register Quality Assurance and
its products carry the CE mark and com-
ply with the European Pressure Equip-
ment Directive, PED 97/23/EC.
terichtlinie PED 97/23/E
05

Our Goals
to support the industry in their need for
clean compressed air for pneumatic
systems, mainly in electronics,
semi-conductors, medical / pharm
ceutical, chemical, plastic, textile,
automobile, food & beverage,
furniture and consumer products
to exceed customers expectations
through high quality products
continously improvements to the quality
excellent customer relationships
06

GENERAL INFORMATION

Air Pollution Nature And Extent Of Air Impurities


In just one cubic metre of air, there are
milions of particles potentially harmful to Casting sand

your machines and equipments. These are Water mist Heavy industrial mists

primarily made up dust, bacteria, viruses, Coal dust

Road dust
smoke, fumes, hydrocarbons, water, oil
Cement dust
and other contaminants derived from hu-
Pollen
mand and industrial activities. When this air
Spores
is sucked into your compressor and com-
Bacteria
pressed to 8 bar pressure, for instance,
Metalurgical dust
the concentration of particles will increase Paint-spraying mist

by eight times. This will make the air more Viruses Oil vapours Oil mists

troublesome by eightfold. Tobacco odours

Gas molecules

Pore diameters of activated charcoal, silica gel etc.

Particle size in micron

Filter Working Range

Quality Classification ISO - 8573 Part 1 Compressed Air Quality Class


ISO 8573 is the group of international
Solid Particulate Per m3 Water
standards relating to compressed air qual- Class Pressure Oil
dewpoint C
ity. Using the ISO Quality Class Table, a
maximum level of contaminants can be
specified for each air quality class (Solid
Particulate, Water Vapor & Oil at point of
application).

ISO 8573 is the group of international standards relating to compressed air quality.

Using the ISO Quality Class Table, a maximum level of contaminants can be specified for each
air quality class (Solid Particulate, Water Vapor & Oil at point of application).

Example:
ISO 8573 : Class 1.2.1
Not more than 100 Solid Particles 0.1-0.5 micron. Not more than 1 Solid Particles 0,5-1 micron.
No Solid Particles > 1 micron.

Water Pressure Dew Point < - 40C Oil (including oil vapour) < 0,01mg / m3
07

Certificates
Quality Assurance
Our company has been audited by Lloyds
Register Quality Assurance (LRQA) and
awarded the ISO 9001.

International Approval
Our products have been certified by
Lloyds Register to be in compliance to the
European Pressure Equipment Directive
(PED 97/23/EC) and carry the CE mark.

Tested And Validated


Our products have been tested and
validated in accordance to ISO 8573 by
a reputable independent institute in Ger-
many. A copy of the certificate is available
upon request.

Typical Composition of Compressed Air Conditioning

Coarse Filtration General Filtrationon Fine Filtration

Technically Oil Free And Odour Free Filtration Technically Oil Free And Odour Free Filtration

Technically Oil Free And Odour Free Filtration Remarks


C = Compressor - AC = After Cooler - WS = Water Separator
RT = Receiver Tank - RD = Refrigeration Dryer
AD = Adsorption Dryer - C, P, U, H, S = AFE filter grades
* These are only general guidelines. Actual layout will differ from
case to case depending on actual requirements and conditions.
08

COMPRESSED AIR FILTERS

High efficiency filtration for clean &


technically oil-free compressed air
Your Requirements
There are millions of particles in a cubic metre of environmental air and over 80% of these particles are less than 2 micron in size. When
this air is compressed to, say 7 bar (g), the ratio of contaminants to air also increases 7 fold. This will definitely contribute problems to the
compressor system with wear particles, oil vapours and fine aerosols. Inefficient purification can lead to unnecessary high operating and
maintenance costs. With todays highly advanced and sensitive pneumatic equipment, an efficient and reliable compressed air filter in
conjunction with other compressed air treatment products is necessary to provide years of trouble-free service.

Our Solution
Our filters are manufactured with either die-cast aluminium or carbon steel housings for wide range of operating pressures and capaci-
ties. These filters were designed in accordance with international standards and carry the CE mark, complying with the European Pres-
sure Equipment Directive PED 97/23/EC. With over 20 years of experience, Airfilter Engineering offers a comprehensive range of filters
with different filtration grades to meet the recommendation of the ISO 8573 for different types of users. It has been engineered for low
pressure drop, which gives the benefit of minimum energy and maintenance cost. Airfilter Engineerings products are highly effective
yet economical to your total business investment. The filters are fully tested for performance, safety and leakage, and treated to prevent
surface oxidation.

AFE Filter Series


Airfilter Engineering (AFE) has developed a comprehensive range of filter grades to cater to the requirements of different applications.
All our filter media are of pleated design to ensure higher filtration area. Here at AFE, filters and elements can also be custom-made to
suit your needs.

AFE Filter Grade P


for coarse pre-filtration Differential
particle removal down to 3 micron Pressure Gauge

AFE Filter Grade U


for general filtration
particle removal down to 1 micron
Aluminium
Oil content down to 0.1 mg/m3 at 7 bar and 20C Housing

AFE Filter Grade H


for high performance filtration
particle removal down to 0.01 micron
Oil content down to 0.01 mg/m3 at 7 bar and 20C
Pleated
AFE Filter Grad S Filter Element
for high performance filtration
particle removal down to 0.01 micron
Oil content down to 0.001 mg/m3 at 7 bar and
20C in conjunction with filter grade H
Automatic
AFE Filter Grad C Condensate Drain
activated carbon filter for odour removal
in conjunction with AFE filter grade H attainable Manual
oil content up to 0.001 mg/m3 at 7 bar and 20C Drain Valve
09

WATER SEPARATOR

Centrifugal separation to remove up to 99%


of water aerosol in compressed air.
Your Requirements
For compressed air installations where water is a real problem, Airfilter Engineerings water separators can deal simply and effectively
with the problem. Typically, water separators are installed downstream of after coolers, air receivers, refrigeration dryers and at strategic
points in pipe work installations.

Our Solution
Airfilter Engineerings water separators are designed to remove up to 99% water aerosols in the compressed air at very low maintenance
cost. Our water separator applies the centrifugal motion effect to force liquid water out of compressed air. The spinning causes the con-
densate to merge on the water separator walls and when the condensate gains enough mass it falls to the bottom of the separator bowl
where it is stored until it is flushed out of the system by the automatic drain valve.

AFE Water Separator


The water separator comes in aluminium housing with polypropylene mechanism. They are available for operating pressures of up to
16 bar (g).

Vortex Generato - Vane


Aerodynamically designed
vortex generator vanes for
greater efficiency.

Vortex Generator - Cone


Conical profile for enhanced
vortex effect.

Cyclone Arrestor
Special profile designed to improve
separator efficiency and prevent
re-entrainment of separated water.

Automatic Condensate Drain


Efficiently discharge (collected)
condensate from the system.
10

ADSORPTION DRYER

C-HDDN Series

Your Requirements
Compressed air is an industrial wide used power source. Over the years it became a crucial
part of a wide range in industrial processes. However, compressed air after compression is not
clean and contains impurities like water, oil, dirt, wear particles and so on. This mixture creates
a form of condensate which damages downstream equipment like air tools, pneumatic cylinders
and other pneumatic equipments. It also causes high product rejects, high maintenance and
costly air leaks in compressed air systems. The use of highly efficient compressed air filters and
condensate drains will remove a lot of these impurities and can eliminate most of the problems
downstream. For many applications this is not enough. These applications need an even higher
level of compressed air quality. AFEs C-HDDN desiccant dryers will provide this level of air
quality at the point where the quality is needed without investing a large amount in centralized
purification systems which are often not needed because only certain areas of the production
process needs that high quality air.

Our Solution
The C-HDDN series of compact desiccant air dry-
ers offer users the air quality at the point where it is
needed. A reliable technology, proven thousand of
times in the market, the C-HDDN provide the secu-
rity to run the process without interruption. No more
wearing parts or faulty air tools and more security for
downstream machines and operations. This series
comes with installed pre- and afterfilter, desiccant fill
and a reliable PCB controller with indication lights to
monitor the operation. Its build in ready and only has
to be connected to a electrical power source and com-
pressed air inlet/outlet. Optional available is a dryer
run/stop dry contact as well as a load control system
for energy savings. This series of compact desiccant
air dryers will meet the requirements of ISO 8573.1
Class 1.2.1 as a standard. Higher quality classes
based on request available.
11

COMPATIBLE ELEMENTS + ACCESSORIES

Pleated Filter Media,


available for most leading
brands in the market.
Airfilter Engineering produces a comprehensive range
of compatible or equivalent replacement elements suit-
able for installation in other competing brands of filters.
Every element is built to the same exacting standards
at Airfilter Engineering. That means that our compat-
ible elements have been constructed from the same
high quality materials that are used for all Airfilter En-
gineerings products. This, coupled with our pleated
design, ensures that performances of our compatible
elements are at least equal to or better than the original
brands.

Advantages of AFE
Filter Elements:
high dirt holding capacity
high flow capacity
high filtration area
low pressure differential

Compresses Air Accessories


Airfilter Engineering has available a complete range of accessories to complement the core prod-
ucts. These include the automatic condensate drains, differential pressure gauges & indicators,
mounting brackets, connecting kits and others.
12

COMPRESSED AIR FILTERS D-SERIES

16 bar maximum pressure with threaded connections


HOUSINGS INCLUDING ELEMENT, DRAIN1 UND DIFFERENTIAL PRESSURE INDICATOR (DP13)
Standard Colour: RAL5015
Filter Housings comply to PED 97/23/EC
Order Number Connection Capacity at 7 bar(g)/min List Price
m3/min in
D02* 1/4 0.83 97,99
D04* 3/8 1.25 126,38
D06* 1/2 1.83 142,42
D08* 3/4 2.83 188,63
D10* 1 5.00 215,62
D12* 1 1/2 8.33 230,11
D14* 1 1/2 10.83 244,59
D16* 1 1/2 13.33 353,00
D20* 2 16.67 436,73
D22* 2 21.67 520,46
D24* 2 1/2 29.17 615,97
D26* 2 1/2 37.17 1.342,72
D30* 3 43.33 1.447,14
D32* 3 50.00 1.551,55

* Replace the asterisk with the filtration grade required.


1 Filter Grade P,U,H and S with automatic drain; Filter Grade C with semi-automatic drain

Replacement Elements
Order Number Product Description List Price
Plastic End Caps in
EDA02*-P for AFE Complete Filter D02 18,54
EDA04*-P for AFE Complete Filter D04 27,38
EDA06*-P for AFE Complete Filter D06 35,08
EDA08*-P for AFE Complete Filter D08 44,78
EDA10*-P for AFE Complete Filter D10 57,60
EDA12*-P for AFE Complete Filter D12 64,60
EDA14*-P for AFE Complete Filter D14 71,59
EDA16*-P for AFE Complete Filter D16 90,98
EDA20*-P for AFE Complete Filter D20 100,40
EDA22*-P for AFE Complete Filter D22 109,81
EDA24*-P for AFE Complete Filter D24 154,91
EDA26*-P for AFE Complete Filter D26 210,12
EDA30*-P for AFE Complete Filter D30 231,57
EDA32*-P for AFE Complete Filter D32 253,02

Select Filtration Grades Required


Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
13

Optional Condensate Drain


Order Number Product Description List Price in
ESD100 Electronic Condensate Drain (D02-D32) 102,31

Correction Factors f for different Operating Temperatures and Pressures


Pressure 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Factor f 0.25 0.38 0.50 0.65 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13

Dimensions (mm)
Model A B C D
D02 104 193.5 96.4 55
D04 104 216.5 96.4 65
D06 104 216.5 96.4 75
D08 104 266.5 96.4 125
D10 148 276.8 137.7 110
D12 148 346.8 137.7 180
D14 148 486.8 137.7 270
D16 148 486.8 137.7 320
D20 197 603.6 190.4 330
D22 197 703.6 190.4 430
D24 197 803.6 190.4 530
D26 197 903.6 190.4 630
D30 255 752.2 207.8 450
D32 255 852.2 207.8 550

D02-D16

D20-D32
14

COMPRESSED AIR FILTERS G-SERIES

16 bar maximum pressure with threaded connections


HOUSINGS INCLUDING ELEMENT AND AUTODRAIN
Standard Colour: RAL5015. Other colours on request.

Filter Housings comply to PED 97/23/EC


Order Number Connection Capacity at 7 bar(g)/min List Price in
m3/min
G10*-I5 1/2 0.66 115,29
G15*-I5 1/2 0.96 130,39
G20*-I5 1/2 1.32 148,68
G30*-I5 3/4 1.98 167,55
G55*-I5 1 3.30 221,92
G95*-I5 1 1/2 5.70 253,67
G150*-I5 1 1/2 9.00 287,75
G220*-I5 1 1/2 13.32 415,30
G290*-E4 2 17.46 612,31
G430*-E4 2 1/2 26.16 724,67
G625*-E4 3 37.50 1.579,67
G775*-E4 3 46.62 1.829,35

* Replace the asterisk with the filtration grade required.

Replacement Elements
Order Number Product Description List Order Number Product Description List
Aluminium Price Plastic Price
End Caps in End Caps in
EA10* for AFE Complete Filter G10 20,60 EA10*-P for AFE Complete Filter G10 18,54
EA15* for AFE Complete Filter G15 26,94 EA15*-P for AFE Complete Filter G15 24,25
EA20* for AFE Complete Filter G20 30,42 EA20*-P for AFE Complete Filter G20 27,38
EA30* for AFE Complete Filter G30 38,98 EA30*-P for AFE Complete Filter G30 35,08
EA55* for AFE Complete Filter G55 49,75 EA55*-P for AFE Complete Filter G55 44,78
EA95* for AFE Complete Filter G95 64,02 EA95*-P for AFE Complete Filter G95 57,62
EA150* for AFE Complete Filter G150 79,55 EA150*-P for AFE Complete Filter G150 71,59
EA220* for AFE Complete Filter G220 101,09 EA220*-P for AFE Complete Filter G220 90,98
EA290* for AFE Complete Filter G290 122,01 EA290*-P for AFE Complete Filter G290 109,81
EA430* for AFE Complete Filter G430 172,13 EA430*-P for AFE Complete Filter G430 154,91
EA625* for AFE Complete Filter G625 233,47
EA775* for AFE Complete Filter G775 281,13
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
15

Optional Condensate Drain


Order Number Product Description List Price in
S1 Semi-Automatic Drain SAD116 16,85
(G10-G220)
S2 Semi-Automatic Drain SAD216 16,85
(G290-G775)
BV Manual Drain Valve (G10-G775) BV116 15,00
ESD100 Electronic Condensate Drain ESD100 102,31
(G10-G775)

Optional Accessories
Order Number Product Description List Price in
A Differential Pressure Indicator DP11 10,09
B Differential Pressure Manometer DP12 52,24

Correction Factors f for different Operating Temperatures and Pressures


Pressure 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Factor f 0.25 0.38 0.50 0.65 0.75 0.88 1.00 1.13 1.25 1.38 1.50 1.63 1.75 1.88 2.00 2.13

Dimensions (mm)
Model A B C D
G10-I5 87 151 24 60
G15-I5 87 192 24 75
G20-I5 87 192 24 90
G30-I5 87 263 24 90
G55-I5 130 285 43 135
G95-I5 130 380 43 235
G150-I5 130 482 43 335
G220-I5 130 692 43 525
G290-E4 162 686 55 520
G430-E4 162 937 55 770
G625-E4 252 910 79 610
G775-E4 252 1060 79 760
16

WATER SEPARATOR

16 bar maximum pressure with threaded connections


HOUSINGS INCLUDING ZYCLONE MECHANISM AND AUTODRAIN
Standard Colour: RAL5015. Other colours on request.
Filter Housings comply to PED 97/23/CE
Order Number Connection Capacity Capacity List Price in
at 7 bar(g)/min at 7 bar(g) cfm
CS10-I5 1/2 0.92 32.35 99,62
CS20-I5 1/2 2.50 88.24 105,21
CS30-I5 3/4 4.08 144.12 111,46
CS55-I5 1 6.58 232.35 159,10
CS95-I5 1 1/2 10.58 373.53 170,60
CS150-I5 1 1/2 13.83 488.24 191,19
CS220-I5 1 1/2 17.00 600.00 437,00
Alternative connection dimensions available on request.

B
Dimensions (mm)
Model A B C
CS10-I5 151 24 60 A
CS20-I5 192 24 90
CS30-I5 263 24 90
CS55-I5 285 43 135
CS95-I5 380 43 235
CS150-I5 482 43 335 C

CS220-I5 692 43 525


17

DRYER / ADSORBER

16 bar maximum pressure with threaded connections, C-HDDN Series


PRICING INCLUDING PRE- AND AFTERFILTER
Standard Colour: RAL5015. Other colours on request.
Adsorption Dryer, C-HDDN Series
Order Number l/s m3/min m3/h Cfm Connection List Price in
without dew point sensor
C-HDDN002 2.00 0.12 7.20 4.24 1/4 954,67
C-HDDN004 4.11 0.24 14.40 8.47 1/4 983,33
C-HDDN007 7.00 0.42 25.20 14.82 1/4 1.019,33
C-HDDN010 10.00 0.60 36.00 21.18 1/4 1.176,00
C-HDDN015 15.00 0.90 54.00 31.76 1/2 1.433,33
C-HDDN020 20.00 1.20 72.00 42.35 1/2 1.474,67
C-HDDN030 30.00 1.80 108.00 63.53 1 1.924,00
C-HDDN045 45.00 2.70 162.00 95.20 1 1.990,67

Adsorption Dryer incl. additional Activated Carbon Stage, C-HDADN Series


Order Number l/s m3/min m3/h Cfm Connection List Price in
without dew point sensor
C-HDADN002 2.00 0.12 7.20 4.24 1/4 1.184,67
C-HDADN004 4.11 0.24 14.40 8.47 1/4 1.247,58
C-HDADN007 7.00 0.42 25.20 14.82 1/4 1.319,63
C-HDADN010 10.00 0.60 36.00 21.18 1/4 1.505,73
C-HDADN015 15.00 0.90 54.00 31.76 1/2 1.856,37
C-HDADN020 20.00 1.20 72.00 42.35 1/2 1.950,67
C-HDADN030 30.00 1.80 108.00 63.53 1 2.507,20
C-HDADN045 45.00 2.70 162.00 95.20 1 2.659,54

Base on -40C pressure dew point with inlet conditions of 7 bar(g) and 35C
Systems for lower pressure dew points are available on request. Model with dew point sensor on request.

Correction Factors for Sizing of C-HDDN Dryers


for different Operating Temperatures and Pressures
Pressure bar(g) Inlet Temperature (C) Example
25 30 35 40 45 50 Flow Rate 16,9 m3/h
6 0.94 0.90 0.87 0.84 0.79 0.76 Pressure 6 bar
7 1.07 1.03 1.00 0.96 0.92 0.87 Inlet Temperature 40C
8 1.16 1.14 1.11 1.08 1.04 1.00 Pressure Dew -40C
9 1.23 1.21 1.18 1.14 1.10 1.07
Dryer Capacity: 16,9/0,84 = 20,12 m3
10 1.32 1.30 1.27 1.24 1.20 1.16 Therefore, selected dryer model: C-HDDN007

Activated Carbon Adsorber


Order Number Connection Capacity List Price in
at 7 bar(g) m3/h*
C-ACT-N002 1/4 0.12 405,00
C-ACT-N004 1/4 0.24 427,20
C-ACT-N007 1/4 0.42 547,35
C-ACT-N010 1/4 0.60 488,00
C-ACT-N015 1/2 0.90 617,60
C-ACT-N020 1/2 1.20 641,60
C-ACT-N030 1 1.80 850,00
C-ACT-N045 1 2.70 1.050,00

Accessories on page 19.


18

POINT OF USE-DRYER/ ADSORBER


16 bar maximum pressure with threaded connections
HOUSINGS INCLUDING CARTRIDGE AND SEMI-AUTRODRAIN
Standard Colour: RAL5015. Other colours on request.

POINT OF USE DESICCANT ADSORBER


Filter Housings comply to PED 97/23/CE
Order Number Connection Capacity List Price in
at 7 bar(g) m3/h*
G0301/2D-S1 1/2 10 167,55
G0303/4D-S1 3/4 10 167,55
G055D-S1 1 30 221,92
G095D-S1 1 40 253,67
G150D-S1 1 1/2 65 287,75
G220D-S1 1 1/2 105 415,30
* Based on bar and 20C at 7bar(g) working pressure and 20C inlet temperature. Pressure dew point achievable down to -40C.
Maximum recommended inlet temperature of 40C. Differential pressure of 0.15-0.40 bar.

Replacement Cartridge
Order Number Product Description List Price in
CA030D for AFE POU Desiccant Adsorber G0301/2D-S1+ G0303/4D-S1 78,97
CA055D for AFE POU Desiccant Adsorber G055D-S1 99,57
CA095D for AFE POU Desiccant Adsorber G095D-S1 130,47
CA150D for AFE POU Desiccant Adsorber G150D-S1 161,37
CA220D for AFE POU Desiccant Adsorber G220D-S1 206,00

POINT OF USE ACTIVATED CARBON DRYER


Filter Housings comply to PED 97/23/CE
Order Number Connection Capacity List Price in
at 7 bar(g) m3/h*
G010A-S1 1/2 46 115,29
G020A-S1 1/2 70 148,68
G0301/2A-S1 1/2 101 167,55
G0303/4A-S1 3/4 101 167,55
G055A-S1 1 183 221,92
G095A-S1 1 238 253,67
G150A-S1 1 1/2 296 287,75
G220A-S1 1 1/2 425 415,30
* Based on 1 bar and 20C at 7bar(g) working pressure and 20C inlet temperature. Oil vapour removal down to 0.003 mg/m3.
Maximum recommended inlet temperature of 40C. Differential pressure of 0.15-0.40 bar.

Replacement Cartridge
Order Number Product Description List Price in
CA010A for AFE POU Activated Carbon Adsorber G010A-S1 44,63
CA020A for AFE POU Activated Carbon Adsorber G020A-S1 61,80
CA030A for AFE POU Activated Carbon Adsorber G0301/2A-S1 + G0303/4A-S1 78,97
CA055A for AFE POU Activated Carbon Adsorber G055A-S1 99,57
CA095A for AFE POU Activated Carbon Adsorber G095A-S1 130,47
CA150A for AFE POU Activated Carbon Adsorber G150A-S1 161,37
CA220A for AFE POU Activated Carbon Adsorber G220A-S1 206,00
19

ELECTR. DRAIN + ADDITIONAL ACCESSORIES

ELECTRONICAL CONDENSATE DRAIN (ZERO LOSS)


Compressed Air up to 16 bar, Standard Condensate
Order Compressor Capacity1 Filter 2 Max. Temperature Connections List Price
Number Aftercooler Refrigeration Working Range in
Dryer Pressure
ESD 100 180 m3/h 360 m3/h 1800 m3/h 16 bar 1-60C G 1/2 102,31
ESD 150L 450 m3/h 900 m3/h 4500 m3/h 16 bar 1-60C G 1/2 185,00
ESD 333 600 m3/h 1200 m3/h 6000 m3/h 16 bar 1-60C G 1/2 219,73
ESD 1000 1800 m3/h 3600 m3/h 18000 m3/h 16 bar 1-60C G 1/2 288,40
ESD 5277 9500 m3/h 19000 m3/h 95000 m3/h 16 bar 1-60C G 1/2 381,79

1 based on 1 bar and 20C at 7 bar(g) working pressure, suction air: compressor 25C at 60% RH, air discharge: temperature aftercooler 35C,
pressure dew point refrigeration dryer 3 C

2 Condensate from aftercooler or refrigeration dryer to be drained upstream only for residual oil content or small quantities of condensate

Standard Version with BSP thread for 230V/50-60HZ supply voltage.

ACCESSORIES FOR ADSORPTION DRYERS


Order Number Description List Price in
D02-028001 Dew Point Sensor LCS 410 (up to dew point - 100C) On Request
D02-028009 Dew Point Sensor LCS 217 (up to dew point - 50C) On Request
D02-195011A Controller for Heatless Desiccant Dryer (up to dew point - 50C), 230 V* On Request
D02-195011B Controller for Heatless Desiccant Dryer (up to dew point - 100C), 230 V* On Request
Desiccant MS 4A Molecular Sieve, 3-5mm, Datasheet available on Request On Request
Desiccant AA Activated Alumina, 4-6mm, Datasheet available on Request On Request
Desiccant SG Silica Gel N, 3-5mm, Datasheet available on Request On Request
*Alternative power supply system on request.

ADDITIONAL ACCESSORIES
Order Number Description List Price in
DP11 Differetial Pressure Indicator (suitable for all AFE Complete Filters of G-Series) 16 bar 10,09
DP12 Differetial Pressure Manometer (suitable for all AFE Complete Filters of G-Series) 16 bar 52,24
DP13 Differetial Pressure Gauge (suitable for all AFE Complete Filters of G-Series) 16 bar 15,00
EAD416 External Automatic Condenate Drain 16 bar (for G290-G775, D20-D32) 64,19
S1 Semi-Automatic Condensate Drain SAD 116 16 bar (for G10-G220, D02-D16) 16,85
S2 Semi-Automatic Condensate Drain SAD 216 16 bar (for G290-G775, D20-D32) 16,85
IAD 316 DH Internal Automatic Condensate Drain 16 bar, 16,0 mm (DOMNICK HUNTER) 25,49
IAD 516A Internal Automatic Condensate Drain 16 bar (AFE, ZANDER) 48,79
IAD 516B Internal Automatic Condensate Drain 16 bar (DOMNICK HUNTER, NORGREN) 48,79
IAD 516C Internal Automatic Condensate Drain 16 bar (DONALDSON, OMEGA, HIROSS) 48,79
IAD 516D Internal Automatic Condensate Drain 16 bar (ULTRAFILTER) 48,79
BV116 Manual Drain BV 116 16 bar (suitable for all AFE Complete Filters of D- and G-Series) 15,00
other drains on request
MB1030 Filter Mounting Kit (suitable for AFE Filter Model G10-G030) 15,00
MB55220 Filter Mounting Kit (suitable for AFE Filter Model G55-G220) 20,00
CK1/2 - 3 Filter Connection Kit Typ 3 (1/2 - 3) Stainless Steel On Request
OID-08420-6BM Oil Indicator On Request
OID-08421-CR Oil Indicator, Replacement Tubes On Request
20

ALTERNATIVE REPLACEMENT ELEMENTS

COMPATIBLE ELEMENTS FOR HOUSINGS OF OTHER BRAND NAMES


MADE BY AIRFILTER ENGINEERING

These brand names are the properties of its respective owner and are not associated with Airfilter Engineering.

Special parts (high temperature compatible, silicon free, etc.) available upon request.

Please, enquire with us if you could not find what you are looking for.

OVERVIEW

ABAC EWO MTA


ALMIG FRIULAIR NORGREN
ALUP FST OMEGA
ATLAS COPCO HANKISON OMI
BEA FILTRI HIROSS ULTRAFILTER
BEKO HYDROVANE WALKER
BOGE INGERSOLL-RAND WILKERSON
CECCATO KAESER WORTHINGTON
COMPAIR KSI ZANDER
DELTECH MARK
DOMNICK HUNTER MIKROPOR other OEM on request
21

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for ABAC


Original Number Order Number List Price
Aluminium End Caps in
60* EBAC30060* 23,55
80* EBAC30080* 29,19
120* EBAC30120* 37,53
200* EBAC30200* 49,75
340* EBAC30340* 64,02
510* EBAC30510* 79,55
800* EBAC30800* 101,09
1000* EBAC31000* 129,29
1500* EBAC31500* 186,70
2400* EBAC32400* 288,41
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


ABAC Filtration Grade AQF APF/AEF AHF - ACF
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for ALMIG


Original Number Order Number List Price
Plastic End Caps in
30* EAM30*-P 19,17
60* EAM60*-P 21,21
108* EAM108*-P 25,59
180* EAM180*-P 29,32
204* EAM204*-P 38,37
300* EAM300*-P 42,59
432* EAM432*-P 48,58
570* EAM570*-P 56,20
750* EAM750*-P 85,16
990* EAM990*-P 106,27
1104* EAM1104*-P 124,19
1320* EAM1320*-P 142,13
1680* EAM1680*-P 252,10
2100* EAM2100*-P 301,70
2640* EAM2640*-P 352,97
2760* EAM2760*-P 352,97
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


ALMIG Filtration Grade AFP AFM AFS - AFC
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
22

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for ALUP 1


Original Number Order Number List Price
Aluminium End Caps in
*3/1 EAL3/1* 32,84
*3/1,5 EAL3/1,5* 37,59
*4/1,5 EAL4/1,5* 44,73
*4/2,5 EAL4/2,5* 55,21
*5/2,5 EAL5/2,5* 66,63
*5/3 EAL5/3* 86,14
*10/3 EAL10/3* 115,18
*15/3 EAL15/3* 141,36
*20/3 EAL20/3* 176,57
*30/3 EAL30/3* 220,36
*30/5 EAL30/5* 325,93

Compatible / Retrofit Elements for ALUP 2


Original Number Order Number List Price
Aluminium End Caps in
*03/05 EAL03/05* 26,65
*03/10 EAL03/10* 31,41
*04/10 EAL04/10* 35,22
*04/20 EAL04/20* 40,94
*05/20 EAL05/20* 48,07
*05/25 EAL05/25* 60,44
*07/25 EAL07/25* 73,77
*10/30 EAL10/30* 115,18
*15/30 EAL15/30* 144,69
*20/30 EAL20/30* 176,57
*30/30 EAL30/30* 220,36
*30/50 EAL30/50* 318,89

Compatible / Retrofit Elements for ALUP 3


Original Number Order Number List Price Order Number List Price
Aluminium End Caps in Plastic End Caps in
*1030 EAL1030* 20,60
*1050 EAL1050* 26,94 EAL1050*-P 24,25
*1070 EAL1070* 30,42 EAL1070*-P 27,38
*1140 EAL1140* 38,98 EAL1140*-P 35,08
*2010 EAL2010* 49,75 EAL2010*-P 44,78
*2020 EAL2020* 64,02 EAL2020*-P 57,62
*2030 EAL2030* 79,55 EAL2030*-P 71,59
*2050 EAL2050* 101,09 EAL2050*-P 90,98
*3050 EAL3050* 122,01 EAL3050*-P 109,81
*3075 EAL3075* 172,13 EAL3075*-P 154,91
*5060 EAL5060* 233,47
*5075 EAL5075* 281,13
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


ALUP Filtration Grade VA - MA, SA - AK
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
23

Compatible / Retrofit Elements for ATLAS COPCO 1


Original Number Order Number List Price Order Number List Price
Aluminium End Caps in Plastic End Caps in
*006 EAC006* 24,45
*013 EAC013* 32,46 EAC013*-P 29,21
*025 EAC025* 45,27 EAC025*-P 40,75
*040 EAC040* 59,30 EAC040*-P 53,37
*085 EAC085* 78,93 EAC085*-P 71,04
*195 EAC195* 103,77 EAC195*-P 93,39
*295 EAC295* 150,25 EAC295*-P 135,22
*400 EAC400* 175,89 EAC400*-P 158,30
*500 EAC500* 225,58 EAC500*-P 203,02

Compatible / Retrofit Elements for ATLAS COPCO 2


Original Number Order Number List Price
Aluminium End Caps in
*009 EAC009* 32,33
*017 EAC017* 40,37
*032 EAC032* 49,85
*044 EAC044* 70,73
*060 EAC060* 79,59
*070 EAC070* 79,59
*120 EAC120* 125,98
*130 EAC130* 125,98
*150 EAC150* 135,90
*170 EAC170* 135,90
*175 EAC175* 140,98
*260 EAC260* 189,39
*280 EAC280* 189,39
*310 EAC310* 189,39
*390 EAC390* 230,99
*425 EAC425* 230,99
*520 EAC520* 307,81
*550 EAC550* 307,81
*780F EAC780* 268,87
*850F EAC850* 268,87
*1050F EAC1050* 268,87
*1400F EAC1400* 268,87
*1800F EAC1800* 268,87
*2100F EAC2100* 268,87
*2700F EAC2700* 268,87
*3150F EAC3150* 268,87
*F EACF*

Select Filtration Grades Required


ATLAS COPCO Filtration Grade - DD,DDP PD - QD
AFE Filtration Grade P U H S C / SC1
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

1) SC only with aluminium end caps available.


24

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for BEA FILTRI


Original Number Order Number List Price
Aluminium End Caps in
ARS030* EBEA030* 31,46
ARS100* EBEA100* 43,02
ARS180* EBEA180* 51,30
ARS290* EBEA290* 71,19
ARS460* EBEA460* 99,10
ARS610* EBEA610* 112,74
ARS930* EBEA930* 125,26
ARS1050* EBEA1050* 147,89
ARS1400* EBEA1400* 183,14
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


BEA FILTRI Filtration Grade RM RB,RF RA - CA
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for BEKO


Original Number Order Number List Price
Aluminium End Caps in
FE088* EBK088* 209,33
FE139* EBK139* 375,31
FE361* EBK361* 25,82
FE371* EBK371* 34,67
FE511* EBK511* 42,05
FE711* EBK711* 60,49
FE731* EBK731* 71,57
FE811* EBK811* 81,15
FE821* EBK821* 90,74
FE831* EBK831* 109,18
FE851* EBK851* 135,01
FE951* EBK951* 237,21
FE961* EBK961* 275,10
FE981* EBK981* 322,50

* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


BEKO Filtration Grade X25/X5 X1 XA - CA
AFE Filtration Grade P U-HT H-HT S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
25

Compatible / Retrofit Elements for BOGE 1


Original Number Order Number List Price
Aluminium End Caps in
*1/5 EBG005* 20,60
*1/10 EBG010* 26,94
*1/12 EBG012* 30,42
*1/20 EBG020* 38,98
*1/30 EBG030* 49,75
*1/50 EBG050* 64,02
*1/80 EBG080* 79,55
*1/120 EBG120* 101,09
*1/160 EBG160* 122,01
*1/250 EBG250* 172,13
*1/400 EBG400* 281,13
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


BOGE 1 Filtration Grade V - FP - A
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for BOGE 2


Original Number Order Number List Price
Plastic End Caps in
*6 EBGE006*-P 27,47
*9 EBGE009*-P 41,89
*12 EBGE012*-P 41,89
*18 EBGE018*-P 50,13
*36 EBGE036*-P 59,74
*65 EBGE065*-P 72,10
*95 EBGE095*-P 81,03
*130 EBGE130*-P 91,33
*190 EBGE190*-P 138,02
*260 EBGE260*-P 162,74
*380 EBGE380*-P 220,42
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


BOGE 2 Filtration Grade - FP FM - FA
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
26

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for CECCATO 1


Original Order Number Original Order Number Original Order Number Original Order Number List Price
Number Plastic Number Plastic Number Plastic Number Plastic in
End Caps End Caps End Caps End Caps
3320 ECC3320P-P 3330 ECC3330U-P 3360 ECC3360H-P 3380 ECC3380C-P 26,94
3321 ECC3321P-P 3331 ECC3331U-P 3361 ECC3361H-P 3381 ECC3381C-P 30,42
3322 ECC3322P-P 3332 ECC3332U-P 3362 ECC3362H-P 3382 ECC3382C-P 38,98
3323 ECC3323P-P 3333 ECC3333U-P 3363 ECC3363H-P 3383 ECC3383C-P 49,75
3324 ECC3324P-P 3334 ECC3334U-P 3364 ECC3364H-P 3384 ECC3384C-P 64,02
3325 ECC3325P-P 3335 ECC3335U-P 3365 ECC3365H-P 3385 ECC3385C-P 79,55
3326 ECC3326P-P 3336 ECC3336U-P 3366 ECC3366H-P 3386 ECC3386C-P 101,09
3327 ECC3327P-P 3337 ECC3337U-P 3367 ECC3367H-P 3387 ECC3387C-P 122,01
3328 ECC3328P-P 3338 ECC3338U-P 3368 ECC3368H-P 3388 ECC3388C-P 172,13
32801 ECC32801P* 33801 ECC33801U* 33601 ECC33601H* 38801 ECC33801C* 233,47
3329 ECC3329P* 3339 ECC3339U* 3369 ECC3369H* 3389 ECC3389C* 281,13

*Marked elements only available with aluminium end caps.

Compatible / Retrofit Elements for CECCATO 2


Original Number Order Number List Price
Aluminium End Caps in
*10 ECC010* 23,55
*13 ECC013* 29,19
*20 ECC020* 37,53
*33 ECC033* 49,75
*60 ECC060* 64,02
*85 ECC085* 79,55
*130 ECC130* 101,09
*170 ECC170* 129,29
*250 ECC250* 186,70
*400 ECC400* 288,41
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


CECCATO Filtration Grade FPRO FMO FMM - FCA
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
27

Compatible / Retrofit Elements for COMPAIR 1


Original Number Order Number List Price Order Number List Price
Aluminium End Caps in Plastic End Caps in
7* ECB007* 24,45
11* ECB011* 32,46 ECB011*-P 29,21
35* ECB035* 45,27 ECB035*-P 40,75
50* ECB050* 59,30 ECB050*-P 53,37
60* ECB060* 78,93 ECB060*-P 71,04
100* ECB100* 103,77 ECB100*-P 93,39
120* ECB120* 150,25 ECB120*-P 135,22
200* ECB200* 175,89 ECB200*-P 158,30
300* ECB300* 225,58 ECB300*-P 203,02
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


COMPAIR 1 Filtration Grade - GPP OFP - OVR
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for COMPAIR 2


Original Number Order Number List Price Order Number List Price
Aluminium End Caps in Plastic End Caps in
98245/121 ECB006U 24,45
98245/122 ECB013U 32,46 ECB013U-P 29,21
98245/123 ECB025U 45,27 ECB025U-P 40,75
98245/125 ECB040U 59,30 ECB040U-P 53,37
98245/126 ECB085U 78,93 ECB085U-P 71,04
98245/127 ECB195U 103,77 ECB195U-P 93,39
98245/128 ECB295U 150,25 ECB295U-P 135,22
98245/130 ECB400U 175,89 ECB400U-P 158,30
98245/129 ECB500U 225,58 ECB500U-P 203,02
98245/141 ECB006H 24,45
98245/142 ECB013H 32,46 ECB013H-P 29,21
98245/143 ECB025H 45,27 ECB025H-P 40,75
98245/145 ECB040H 59,30 ECB040H-P 53,37
98245/146 ECB085H 78,93 ECB085H-P 71,04
98245/147 ECB195H 103,77 ECB195H-P 93,39
98245/148 ECB295H 150,25 ECB295H-P 135,22
98245/150 ECB400H 175,89 ECB400H-P 158,30
98245/149 ECB500H 225,58 ECB500H-P 203,02
98245/161 ECB006SC 24,45
98245/162 ECB013SC 32,46
98245/163 ECB025SC 45,27
98245/164 ECB040SC 59,30
98245/165 ECB065SC 73,37
98245/166 ECB085SC 78,93
98245/167 ECB195C 103,77 ECB195C-P 93,39
98245/168 ECB295C 150,25 ECB295C-P 135,22
98245/170 ECB400C 175,89 ECB400C-P 158,30
98245/169 ECB500C 225,58 ECB500C-P 203,02
28

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for COMPAIR 3


Original Number Order Number List Price
Aluminium End Caps in
CE0005* ECB005* 24,45
CE0010* ECB010* 32,46
CE0018* ECB018* 45,27
CE0036* ECB036* 59,30
CE0048*, CE0072*, CE0087* ECB087* 78,93
CE0120*, CE0132* ECB132* 103,77
CE0198*, CE0600* ECB198* 150,25
CE0240*, CE0258* ECB258* 175,89
CE0372* ECB372* 225,58
CE0004D ECB004SC 24,45
CE0008D ECB008SC 32,46
CE0015D ECB015SC 45,27
CE0024D ECB024SC 59,30
CE0039D ECB039SC 59,30
CE0051D ECB051SC 78,93
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


COMPAIR 3 Filtration Grade A E,B C - D
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for COMPAIR 4


Original Number Order Number List Price
Plastic End Caps in
CE0006N* ECBE0006*-P 27,47
CE0012N* ECBE0012*-P 41,89
CE0018N* ECBE0018*-P 50,13
CE0036N* ECBE0036*-P 59,74
CE0066N* ECBE0066*-P 72,10
CE0096N* ECBE0096*-P 81,03
CE0132N* ECBE0132*-P 91,33
CE0198N* ECBE0198*-P 138,02
CE0258N* ECBE0258*-P 162,74
CE0372N* ECBE0372*-P 220,42
CE0600N* ECBE0600** 144,89
* Replace the asterisk with the filtration grade required.
*Marked elements only available with aluminium end caps.

Select Filtration Grades Required


COMPAIR 4 Filtration Grade - B,E,F C - D
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
29

Compatible / Retrofit Elements for DELTECH 1


Original Number Order Number List Price
Aluminium End Caps in
850* EDT850* 32,63
851* EDT851* 32,63
852* EDT852* 49,97
853* EDT853* 32,63
854* EDT854* 49,97
870* EDT870* 63,23
871* EDT871* 63,23
872* EDT872* 72,92
873* EDT873* 63,23
874* EDT874* 63,23
875* EDT875* 72,92
8100* EDT8100* 126,98
8101* EDT8101* 126,98
8102* EDT8102* 126,98
8105* EDT8105* 126,98
8111* EDT8111* 141,25
8112* EDT8112* 141,25
8113* EDT8113* 141,25
8113L* EDT8113L* 175,00
8121* EDT8121* 167,55
8201* EDT8201* 122,67
8202* EDT8202* 150,00

Compatible / Retrofit Elements for DELTECH 2


Original Number Order Number List Price
Aluminium End Caps in
009* EDTD009 32,27
018* EDTD018 32,27
136* EDTD136 43,95
054* EDTD054 61,80
090* EDTD090 82,40
135* EDTD135 85,83
216* EDTD216 142,14
285* EDTD285 170,98
405* EDTD405 186,77
540* EDTD540 236,90
750* EDTD750 312,43
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


DELTECH Filtration Grade - PFD HFD - CFD
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
30

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for DOMNICK HUNTER 1


Original Number Order Number List Price Order Number List Price
Aluminium in Plastic in
End Caps End Caps
003* ED003* 20,00
006*, 009* ED006* 24,45
013*, 017* ED013* 32,46 ED013*-P 29,21
025*, 030* ED025* 45,27 ED025*-P 40,75
040*, 058* ED040* 59,30 ED040*-P 53,37
060*, 080*, 085*, 125*, 145* ED085* 78,93 ED085*-P 71,04
120*, 170*, 195*, 205*, 220* ED195* 103,77 ED195*-P 93,39
200*, 295*, 330* ED295* 150,25 ED295*-P 135,22
375*, 400*, 405*, 430* ED400* 175,89 ED400*-P 158,30
300*, 360*, 500*, 620* ED500* 225,58 ED500*-P 203,02
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


DOMNICK HUNTER 1 Filtergrad PF AO, AR AA,AAR AX ACS AC
AFE Filtration Grade P U H S C SC1
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a n/a
1) SC only with Aluminium End Caps available.

Compatible / Retrofit Elements for DOMNICK HUNTER 2


Original Number Order Number List Price
Plastic End Caps in
005* EDE005*-P 24,03
010* EDE010*-P 27,47
015* EDE015*-P 41,89
020* EDE020*-P 50,13
025* EDE025*-P 59,74
030* EDE030*-P 72,10
035* EDE035*-P 81,03
040* EDE040*-P 91,33
045* EDE045*-P 138,02
050* EDE050*-P 162,74
055* EDE055*-P 220,42
060* EDE060*-P 144,89
100* EDE100*-P 85,87
150* EDE150*-P 162,74
200* EDE200*-P 220,42
* Replace the asterisk with the filtration grade required.
AC Elements for Duplex Housings are not available yet.

Select Filtration Grades Required


DOMNICK HUNTER 2 Filtration Grade - AO,AR AA,AAR - ACS
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
31

Compatible / Retrofit Elements for EWO


Original Number Order Number List Price
Aluminium End Caps in
429/156 EEW429/156 61,01
429/158 EEW429/158 76,82
429/159 EEW429/159 98,54
429/161 EEW429/161 125,12
429/162 EEW429/162 168,09
429/163 EEW429/163 240,20
430/02 EEW430/02 55,50
430/06 EEW430/06 61,01
430/08 EEW430/08 76,82
430/09 EEW430/09 98,54
430/11 EEW430/11 125,12
430/12 EEW430/12 168,09
430/13 EEW430/13 240,20
431/06 EEW431/06 61,01
431/08 EEW431/08 76,82
431/09 EEW431/09 98,54
431/11 EEW431/11 125,12
431/12 EEW431/12 168,09
431/13 EEW431/13 240,20
32

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for FRIULAIR 1


Original Number Order Number List Price
Aluminium End Caps in
L*008 EFA008* 23,55
L*011 EFA011* 29,19
L*018 EFA018* 37,53
L*031 EFA031* 49,75
L*052 EFA052* 64,02
L*075 EFA075* 79,55
L*118 EFA118* 101,09
L*168 EFA168* 129,29
L*250 EFA250* 186,70
L*400 EFA400* 288,41
* Replace the asterisk with the filtration grade required.

Compatible / Retrofit Elements for FRIULAIR 2


Original Number Order Number List Price
Aluminium End Caps in
FT*008 EFAT008* 19,53
FT*012 EFAT012* 28,87
FT*018 EFAT018* 37,53
FT*030 EFAT030* 41,03
FT*055 EFAT055* 59,60
FT*080 EFAT080* 71,72
FT*120 EFAT120* 118,21
FT*160 EFAT160* 139,77
FT*220 EFAT220* 180,25
FT*250 EFAT250* 189,35
FT*400 EFAT400* 398,44
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


FRIULAIR Filtration Grade P S X - Z
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
33

Compatible / Retrofit Elements for FST


Original Number Order Number List Price
Aluminium End Caps in
25* EAFST25* 30,00
30* EAFST30* 33,33
50* EAFST50* 41,33
70* EAFST70* 60,67
90* EAFST90* 70,00
110* EAFST110* 83,33
120* EAFST120* 100,00
130* EAFST130* 136,67
140* EAFST140* 160,00
170* EAFST170* 213,33
180* EAFST180* 300,00
190* EAFST190* 366,67
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


FST Filtration Grade V ZN XN XXN A
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for HANKISON (*please note: only push-fit retrofits are available and not with tie rod fittings)
Original Number Order Number List Price
Aluminium End Caps in
12* EHK12* 24,73
16* EHK16* 31,57
20* EHK20* 43,95
24* EHK24* 57,56
28* EHK28* 70,59
32* EHK32* 77,28
36* EHK36* 98,09
40* EHK40* 120,15
44* EHK44* 145,49
48* EHK48* 161,01
52* EHK52* 154,48
54* EHK54* 163,47
56* EHK56* 154,48
PV* EHKPV* 154,48
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


HANKISON Filtration Grade E9 E6,E7 E5 E3 E1
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
34

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for HIROSS


Original Number Order Number List Price
Aluminium End Caps in
004*, 006*, 010* EH004* 26,49
007*, 009*, 016* EH007* 30,77
015*, 020*, 022* EH015* 34,19
024*, 030* EH024* 40,47
035*, 045* EH035* 49,72
060*, 072* EH060* 70,04
090*, 110*, 135* EH090* 112,83
120*, 151*, 205* EH120* 156,07
150*, 180*, 250* EH150* 186,00
175* EH175* 187,81
200*, 260* EH200* 201,73
240*, 280 EH240* 260,11
300* EH300* 194,13
370* EH370* 219,73
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


HIROSS Filtration Grade Q P S - C
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for HYDROVANE


Original Number Order Number List Price
Aluminium End Caps in
*100E EHV100* 24,45
*150E EHV150* 32,46
*200E EHV200* 45,27
*250E EHV250* 59,30
*350E EHV350* 78,93
*450E EHV450* 103,77
*500E EHV500* 150,25
*530E EHV530* 175,89
*600E EHV600* 225,58
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


HYDROVANE Filtration Grade - DR/GP HE - QR
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
35

Compatible / Retrofit Elements for INGERSOLL-RAND 1


Original Number Order Number List Price
Aluminium End Caps in
E4* EIR004* 24,45
E8* EIR008* 32,46
E15* EIR015* 45,27
E24* EIR024* 59,30
E39* EIR039* 73,37
E50* EIR050* 78,93
E125* EIR125* 103,77
E180* EIR180* 150,25
E270* EIR270* 175,89
E300* EIR300* 225,58
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


INGERSOLL-RAND 1 Filtration Grade - AO,AR AA - AC
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for INGERSOLL-RAND 2


Original Number Order Number List Price Order Number List Price
Aluminium End Caps in Plastic End Caps in
E005* EIR005* 24,45
E010* EIR010* 32,46 EIR010*-P 29,21
E018* EIR018* 45,27 EIR018*-P 40,75
E036* EIR036* 59,30 EIR036*-P 53,37
E048* EIR048* 78,93 EIR048*-P 71,04
E119* EIR119* 103,77 EIR119*-P 93,39
E198* EIR198* 150,25 EIR198*-P 135,22
E239* EIR239* 175,89 EIR239*-P 158,30
E372* EIR372* 225,58 EIR372*-P 203,02
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


INGERSOLL-RAND 2 Filtration Grade - AO/AR AA - AC
AFE Filtration Grade P U H S SC
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
36

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for INGERSOLL-RAND 3


Original Number Order Number List Price
Aluminium End Caps in
IR-*-25 EIR0025* 32,63
IR-*-47 EIR0047* 32,63
IR-*-65 EIR0065* 32,63
IR-*-110 EIR0110* 49,97
IR-*-180 EIR0180* 150,25
IR-*-220 EIR0220* 63,23
IR-*-280 EIR0280* 72,92
IR-*-385 EIR0385* 119,65
IR-*-580 EIR0580* 141,25
IR-*-750 EIR0750* 126,98
IR-*-1100 EIR1100* 141,25
IR-*-1350 EIR1350* 141,25
IR-*-1775 EIR1775* 314,93
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


INGERSOLL-RAND 3 Filtration Grade - D, P H - C
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
37

Compatible / Retrofit Elements for KAESER vor 1991


Original Number Order Number List Price Order Number List Price
Aluminium End Caps in Plastic End Caps in
9.2100.0 EKS1050P 26,94 EKS1050P-P 24,25
9.2101.0 EKS1070P 30,42 EKS1070P-P 27,38
9.2102.0 EKS1140P 38,98 EKS1140P-P 35,08
9.2103.0 EKS2010P 49,75 EKS2010P-P 44,78
9.2104.0 EKS2020P 64,02 EKS2020P-P 57,62
9.2105.0 EKS2030P 79,55 EKS2030P-P 71,59
9.2106.0 EKS2050P 101,09 EKS2050P-P 90,98
9.2107.0 EKS3050P 122,01 EKS3050P-P 109,81
9.2108.0 EKS3075P 172,13 EKS3075P-P 154,91
9.2109.0 EKS5075P 281,13
9.2125.0 EKS1050H 26,94 EKS1050H-P 24,25
9.2126.0 EKS1070H 30,42 EKS1070H-P 27,38
9.2127.0 EKS1140H 38,98 EKS1140H-P 35,08
9.2128.0 EKS2010H 49,75 EKS2010H-P 44,78
9.2129.0 EKS2020H 64,02 EKS2020H-P 57,62
9.2130.0 EKS2030H 79,55 EKS2030H-P 71,59
9.2131.0 EKS2050H 101,09 EKS2050H-P 90,98
9.2132.0 EKS3050H 122,01 EKS3050H-P 109,81
9.2133.0 EKS3075H 172,13 EKS3075H-P 154,91
9.2134.0 EKS5075H 281,13
9.2150.0 EKS1050C 26,94 EKS1050C-P 24,25
9.2151.0 EKS1070C 30,42 EKS1070C-P 27,38
9.2152.0 EKS1140C 38,98 EKS1140C-P 35,08
9.2153.0 EKS2010C 49,75 EKS2010C-P 44,78
9.2154.0 EKS2020C 64,02 EKS2020C-P 57,62
9.2155.0 EKS2030C 79,55 EKS2030C-P 71,59
9.2156.0 EKS2050C 101,09 EKS2050C-P 90,98
9.2157.0 EKS3050C 122,01 EKS3050C-P 109,81
9.2158.0 EKS3075C 172,13 EKS3075C-P 154,91
9.2159.0 EKS5075C 281,13
38

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for KAESER 1991-2000


Original Number Order Number List Price
Aluminium End Caps in
9.2111.0 EKS03/10P 31,41
9.2112.0 EKS04/20P 40,94
9.2113.0 EKS05/20P 48,07
9.2114.0 EKS05/25P 60,44
9.2115.0 EKS07/25P 73,77
9.2116.0 EKS07/30P 96,14
9.2117.0 EKS10/30P 115,18
9.2118.0 EKS15/30P 144,69
9.2119.0 EKS20/30P 176,57
9.2120.0 EKS30/30P 220,36
9.2121.0 EKS30/50P 318,89
9.2122.0 EKS02/05P 23,32
9.2123.0 EKS03/05P 26,65
9.2124.0 EKS04/10P 35,22
9.2136.0 EKS03/10H 31,41
9.2137.0 EKS04/20H 40,94
9.2138.0 EKS05/20H 48,07
9.2139.0 EKS05/25H 60,44
9.2140.0 EKS07/25H 73,77
9.2141.0 EKS07/30H 96,14
9.2142.0 EKS10/30H 115,18
9.2143.0 EKS15/30H 144,69
9.2144.0 EKS20/30H 176,57
9.2145.0 EKS30/30H 220,36
9.2146.0 EKS30/50H 318,89
9.2147.0 EKS02/05H 23,32
9.2148.0 EKS03/05H 26,65
9.2149.0 EKS04/10H 35,22
9.2161.0 EKS03/10C 31,41
9.2162.0 EKS04/20C 40,94
9.2163.0 EKS05/20C 48,07
9.2164.0 EKS05/25C 60,44
9.2165.0 EKS07/25C 73,77
9.2166.0 EKS07/30C 96,14
9.2167.0 EKS10/30C 115,18
9.2168.0 EKS15/30C 144,69
9.2169.0 EKS20/30C 176,57
9.2170.0 EKS30/30C 220,36
9.2171.0 EKS30/50C 318,89
9.2172.0 EKS02/05C 23,32
9.2173.0 EKS03/05C 26,65
9.2174.0 EKS04/10C 35,22
39

Compatible / Retrofit Elements for KAESER after 2000


Original Number Order Number List Price
Aluminium End Caps in
E-*-6 EKS0006* 24,73
E-*-10 EKS0010* 31,57
E-*-18 EKS0018* 43,95
E-*-28 EKS0028* 57,56
E-*-48 EKS0048* 70,59
E-*-71 EKS0071* 77,28
E-*-107 EKS0107* 98,09
E-*-138 EKS0138* 120,15
E-*-177 EKS0177* 145,49
E-*-185 EKS0185* 154,48
E-*-221 EKS0221* 161,01
E-*-283 EKS0283* 163,47
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


KAESER after 2000 Filtration Grade B C,D E F G
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for KSI


Original Number Order Number List Price
Aluminium End Caps in
FE3711* EKSI3711* 44,67
FE5111* EKSI5111* 54,67
FE7111* EKSI7111* 73,33
FE7311* EKSI7311* 101,33
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


KSI Filtration Grade FF5/VF25 MFO SMA - CA
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
40

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for MARK


Original Number Order Number List Price
Aluminium End Caps in
*10 EMAK010* 23,55
*13 EMAK013* 29,19
*20 EMAK020* 37,53
*33 EMAK033* 49,75
*60 EMAK060* 64,02
*85 EMAK085* 79,55
*130 EMAK130* 101,09
*170 EMAK170* 129,29
*250 EMAK250* 186,70
*400 EMAK400* 288,41
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


MARK Filtration Grade FPRO FMO/FPRE FMM - FCA
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for MIKROPOR


Original Number Order Number List Price
Aluminium End Caps in
M048* EMP0048* 26,69
M050* EMP0050* 32,55
M100* EMP0100* 37,92
M150* EMP0150* 58,39
M200* EMP0200* 69,27
M250* EMP0250* 75,37
M300* EMP0300* 85,19
M500* EMP0500* 93,97
M600* EMP0600* 105,80
M851* EMP0851* 202,62
M1210* EMP1210* 223,41
M1510* EMP1510* 324,88
M1810* EMP1810* 374,88
M2210* EMP2210* 393,11
* Replace the asterisk with the filtration grade required.

Bentigten Filtergrad whlen


MIKROPOR Filtration Grade P X Y - A
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
41

Compatible / Retrofit Elements for MTA


Original Number Order Number List Price
Aluminium End Caps in
6050*(HEF005*) EMTA06050* 23,55
7050*(HEF007*) EMTA07050* 29,19
14050*(HEF010*) EMTA14050* 37,53
12075*(HEF018*) EMTA12075* 49,75
22075*(HEF030*) EMTA22075* 64,02
32075*(HEF047*) EMTA32075* 79,55
50075*(HEF070*) EMTA50075* 101,09
51090*(HEF094*) EMTA51090* 129,29
75140*(HEF240*) EMTA75140* 288,41
76090*(HEF150*) EMTA76090* 186,70
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


MTA Filtration Grade P M S - A
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for NORGREN


Original Number Order Number List Price
Aluminium End Caps in
4344-01 EN4344-01H 42,30
4344-02 EN4344-02H 54,86
5350-99 EN5350-99H 31,33
5351-03 EN5351-03H 81,33
5351-08 EN5351-08H 75,00
5568-01 EN5568-01H 36,50

Other Elements and Filtration Grades available on Request.


42

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for OMEGA


Original Number Order Number List Price
Aluminium End Caps in
6050* EOM06050* 23,55
7050* EOM07050* 29,19
14050* EOM14050* 37,53
12075* EOM12075* 49,75
22075* EOM22075* 64,02
32075* EOM32075* 79,55
50075* EOM50075* 101,09
51090* EOM51090* 129,29
51140* EOM51140* 249,82
75140* EOM75140* 288,41
76090* EOM76090* 186,70
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


OMEGA Filtration Grade AFF R,M S - A
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for OMI


Original Number Order Number List Price
Plastic End Caps in
0005* EOMI0005*-P 19,17
0010* EOMI0010*-P 21,21
0018* EOMI0018*-P 25,59
0030* EOMI0030*-P 29,32
0034* EOMI0034*-P 38,37
0050* EOMI0050*-P 42,59
0072* EOMI0072*-P 47,17
0095* EOMI0095*-P 56,20
0125* EOMI0125*-P 85,16
0165* EOMI0165*-P 106,27
0190* EOMI0190*-P 124,19
0220* EOMI0220*-P 142,13
0280* EOMI0280*-P 252,10
0350* EOMI0350*-P 301,70
0440* EOMI0440*-P 352,97
0460* EOMI0460*-P 352,97
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


OMI Filtration Grade QF PF HF - CF
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
43

Compatible / Retrofit Elements for ULTRAFILTER 70er/80er


Original Number Order Number List Price
Aluminium End Caps in
*2/0,5D EU2/0,5D* 24,45
*2/1Z EU2/1Z* 20,60
*2/1,5Z EU2/1,5Z* 26,94
*3/1 EU3/1* 32,83
*3/1,5 EU3/1,5* 37,59
*3/1,5D EU3/1,5D* 32,46
*3/1,5Z EU3/1,5Z* 30,42
*4/1,5 EU4/1,5* 44,73
*4/1,5D EU4/1,5D* 45,27
*4/2,5 EU4/2,5* 55,21
*4/2,5Z EU4/2,5Z* 44,78
*5/1,5Z EU5/1,5Z* 38,98
*5/2,5 EU5/2,5* 66,63
*5/3 EU5/3* 86,14
*6/2,5D EU6/2,5D* 59,30
*8/2,5Z EU8/2,5Z* 64,02
*10/2,5D EU10/2,5D* 78,93
*10/3 EU10/3* 115,18
*12/2,5Z EU12/2,5Z* 79,55
*12/3D EU12/3D* 103,77
*15/3 EU15/3* 141,36
*20/2,5Z EU20/2,5Z* 101,09
*20/3 EU20/3* 176,57
*20/3Z EU20/3Z* 122,01
*24/3D EU24/3D* 150,25
*24/5D EU24/5D* 225,58
*24/5Z EU24/5Z* 233,47
*30/3 EU30/3* 220,36
*30/3Z EU30/3Z* 172,13
*30/5 EU30/5* 325,93
*30/5Z EU30/5Z* 281,13
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


ULTRAFILTER 70er / 80er Filtration Grade V-PE FF MF/SMF - AK
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
44

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for ULTRAFILTER 90er


Original Number Order Number List Price
Aluminium End Caps in
*02/05 EU02/05* 23,32
*02/10 EU02/10* 31,41
*03/05 EU03/05* 26,65
*03/10 EU03/10* 31,41
*04/10 EU04/10* 35,22
*04/20 EU04/20* 40,94
*05/20 EU05/20* 48,07
*05/25 EU05/25* 60,44
*06/10 EU06/10* 63,33
*07/25 EU07/25* 73,77
*07/30 EU07/30* 96,14
*10/30 EU10/30* 115,18
*15/30 EU15/30* 144,69
*20/30 EU20/30* 176,57
*30/30 EU30/30* 220,36
*30/50 EU30/50* 318,89
* Replace the asterisk with the filtration grade required.
Alternative push-fit connection avaiable on request.

Select Filtration Grades Required


ULTRAFILTER 90er Filtration Grade V-PE FF MF/SMF - AK
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for ULTRAFILTER Sterile Filter Elements


Original Number Order Number List Price
Aluminium End Caps in
SRF03/10 EU03/10ST 65,23
SRF04/10 EU04/10ST 68,67
SRF04/20 EU04/20ST 106,43
SRF05/20 EU05/20ST 113,30
SRF05/25 EU05/25ST 123,60
SRF07/25 EU07/25ST 137,33
SRF07/30 EU07/30ST 199,13
SRF10/30 EU10/30ST 233,47
SRF15/30 EU15/30ST 254,07
SRF20/30 EU20/30ST 278,10
SRF30/30 EU30/30ST 309,00
P-SRF03/10 EUP03/10ST 65,23
P-SRF04/10 EUP04/10ST 68,67
P-SRF04/20 EUP04/20ST 106,43
P-SRF05/20 EUP05/20ST 113,30
P-SRF05/25 EUP05/25ST 123,60
P-SRF07/25 EUP07/25ST 137,33
P-SRF07/30 EUP07/30ST 199,13
P-SRF10/30 EUP10/30ST 233,47
P-SRF15/30 EUP15/30ST 254,07
P-SRF20/30 EUP20/30ST 278,10
P-SRF30/30 EUP30/30ST 309,00
SRF=Threaded Version, P-SRF=Push-Fit Version
45

Compatible / Retrofit Elements for WALKER


Original Number Order Number List Price
Aluminium End Caps in
E88* EWK0088* 209,33
E139* EWK0139* 375,31
E361* EWK0361* 25,82
E371* EWK0371* 34,67
E511* EWK0511* 42,05
E711* EWK0711* 60,49
E731* EWK0731* 81,15
E811* EWK0811* 71,57
E821* EWK0821* 90,74
E831* EWK0831* 109,18
E851* EWK0851* 135,01
E1251* EWK1251* 237,21
E1261* EWK1261* 275,10
E1281* EWK1281* 322,50
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


WALKER Filtration Grade X5 X1 XA - AC
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for WILKERSON


Original Number Order Number List Price
Aluminium End Caps in
*95-521 EWSM521* 91,94
*95-548 EWSM548* 35,05
*95-549 EWSM549* 49,53
*95-551 EWSM551* 81,99
*95-559 EWSM559* 137,25
*95-561 EWSM561* 310,70
*95-562 EWSM562* 390,00
*96-646 / *96-650 EWSM646* 23,81
*96-648 EWSM648* 33,44
*96-649 EWSM649* 22,03
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


WILKERSON Filtration Grade FRP MSP MTP - MXP
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
46

COMPATIBLE ELEMENTS

Compatible / Retrofit Elements for WORTHINGTON


Original Number Order Number List Price
Aluminium End Caps in
60* EWC0060* 23,55
80* EWC0080* 29,19
120* EWC0120* 37,53
200* EWC0200* 49,75
340* EWC0340* 64,02
510* EWC0510* 79,55
800* EWC0800* 101,09
1000* EWC1000* 129,29
1500* EWC1500* 186,70
2400* EWC2400* 288,41
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


WORTHINGTON Filtration Grade X5 D M,S - A
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for ZANDER 1


Original Number Order Number List Price Order Number List Price
Aluminium End Caps in Plastic End Caps in
1030* EZ1030* 20,60
1050* EZ1050* 26,94 EZ1050*-P 24,25
1070* EZ1070* 30,42 EZ1070*-P 27,38
1140* EZ1140* 38,98 EZ1140*-P 35,08
2010* EZ2010* 49,75 EZ2010*-P 44,78
2020* EZ2020* 64,02 EZ2020*-P 57,62
2030* EZ2030* 79,55 EZ2030*-P 71,59
2050* EZ2050* 101,09 EZ2050*-P 90,98
3050* EZ3050* 122,01 EZ3050*-P 109,81
3075* EZ3075* 172,13 EZ3075*-P 154,91
5060* EZ5060* 233,47
5075* EZ5075* 281,13
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


ZANDER 1 Filtration Grade V Y, Z, ZP X,XP XP4 A
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a
47

Compatible / Retrofit Elements for ZANDER 2


Original Number Order Number List Price
Plastic End Caps in
CP1008* EZE1008*-P 27,47
CP2010* EZE2010*-P 41,89
CP2020* EZE2020*-P 50,13
CP3025* EZE3025*-P 59,74
CP3040* EZE3040*-P 72,10
CP4040* EZE4040*-P 81,03
CP4050* EZE4050*-P 91,33
CP4065* EZE4065*-P 138,02
CP5065* EZE5065*-P 162,74
CP5080* EZE5080*-P 220,42
* Replace the asterisk with the filtration grade required.

Select Filtration Grades Required


ZANDER 2 Filtration Grade VL ZL XL - A
AFE Filtration Grade P U H S C
Oil Removal, mg/m3 n/a 0.1 0.01 0.001 0.003
Particle Removal, micron 3.0 1.0 0.01 0.01 n/a

Compatible / Retrofit Elements for ZANDER ACTIVATED CARBON CARTRIDGES


Original Number Order Number List Price
in
KT1012A CZ1012A 61,80
KT1019A CZ1019A 78,97
KT2016A CZ2016A 99,57

Compatible / Retrofit Elements for ZANDER POINT OF USE DRYER


Original Number Order Number List Price
in
KT2016MS CZ2016D 99,57
KT2033MS CZ2033D 161,37
KT2053MS CZ2053D 206,00
48

TERMS & CONDITIONS OF SALE & DELIVERY

1 General reference
These Terms and Conditions constitute a binding contract between Purchaser and AFE Airfilter Europe GmbH referred to herein as Seller and are referred to herein as either Terms and
Conditions of Sale, Delivery & Service or this Agreement. Customer accepts these Terms and Conditions by making a purchase from or placing an order with Seller or engaging Seller to
perform or procure any services and/delivery. These Terms and Conditions are subject to change without prior notice, except that the Terms and Conditions posted on the Site at the time
Customer places an order, unless otherwise agreed in writing by Seller and Customer.

All sales, deliveries, services and offers shall be deemed to be made solely upon the basis of these conditions. These conditions shall be deemed to have been acknowledged with acceptance
of the goods or services at the latest. Any counterclaims on the part of the purchaser and references to his own terms of business or purchasing are herewith deemed ineffective. All diver-
gences from these conditions shall require our own written confirmation to obtain validity.

2 Offers, contract ratifications and transaction documents


2.1 All offers are without obligation and subject to change including technical changes in form, colour and/or weight remain within acceptable limits.

2.2 With the Purchase Order, the Purchaser confirms his intention to acquire the ordered products. Delivery of the product or a written statement expresses the acceptance of the incoming
order.

2.3 The ratification of the contract is subject to the correct and timely delivery by our own supplier. The Purchaser will be informed immediately about any changes, delays or inability to supply.

2.4 Oral information or details in catalogues, brochures, leaflets, announcements, commercial mail, pictures or pricelists about general measurements, services and aptitude etc. do not warrant
the validity of the stated characteristics unless confirmed in writing prior to the Purchasers order. However all effort to keep the information accurate and up to date has been taken by the
Seller.

2.5 The Seller retains the right of property and copyright of all pictures, drawings, pricelists, calculations and other pertaining documents. These documents cannot be transmitted to any third
party except with the Sellers expressive written permission. As soon as the Seller of these standard terms has delivered the merchandise according to drawings, models, patterns, plans or any
other documents of the ordering party, the Purchaser is responsible to safeguard copyright and the right of property and take care that these are not violated by any third party. In case a third
party claims omission, particularly in the manufacture and delivery of such goods, the Seller retains the right to terminate any further activity, and, in case of indebtedness demand restitution of
damage. The Purchaser also accepts full responsibility for any related claims on part of a third party, releasing us thereby of any responsibility.

3 Invoice and terms of payment


3.1 With exception of orders based on agreed special prices, goods will be invoiced at list prices in force on the day of dispatch ex work without packaging, postage, freight or any other cost of
shipment, insurances and custom fees. Legal taxes of statutory value added tax apply.

3.2 Prices are subject to modification if after ratification of the contract of purchase costs rise or fall, especially due of tariff agreements on salaries or increase in the price of raw materials.
These are to be documented and submitted to the Purchaser on demand.

3.3. The Purchaser is liable to pay the price of purchase within 30 days of reception of the product by bank transfer, unless other terms of payment have been agreed. If the Purchaser pays
later than the agreed terms of payment the Seller is entitled to claim 8% interest of the basic interest rate. The Seller reserves the right to apply a higher value of further delays.

3.4 All bank fees have to be borne by the customer.

3.5 A payment counts as received as soon as the amount of the transfer is at disposal of the Seller.

3.6 If the Purchaser is in delay with the payment, or a letter of credit is rejected or in case of insolvency, all other claims, including those which are due at a later date, become void and invalid
immediately.

3.7 If a deterioration of the financial credibility of the Purchaser becomes evident and/or previous delay in payment has occured, the Seller reserves the right to demand payment before delivery
or other guarantees of payment.

4 Claims
It is the responsibility of the Purchaser to check the product on hidden defects and to notify the Seller a period of 4 days after receipt of the goods. In case of damaged packaging and other
clear visible damages, the consignment has returned directly on receipt or the Seller is to be informed immediately. For any damage cause during transportation the carrier is liable. The carrier
has to be informed directly, damages have to be confirmed by the driver, visible damaged goods when accepted must be kept separately and the Seller informed immediately. Not properly
recorded or late reported shipping damage will not be replaced. The damaged goods have to be kept available for inspection by the carrier or the Seller or sent back free of charges to the
Seller on request. The same applies in case of complaints or defects. The Seller do not accept freight forwarded returns unless the Seller has approved in writing. Approved returns have to be
sent to the Sellers office address, carriage free.

5 Right to retract
5.1 The Seller of these standard terms shall be released from contractual delivery obligation for a reasonable period, if he is prevented or delayed in delivering the goods in case of unavailabil-
ity of raw material or insufficient supply from the Seller s supplier and the situation with the Seller s supplier can be proven to the Purchaser on demand.

5.2 The same applies in case of force majeure which prevent the Seller from complying with contractual obligations because of unpredictable serious circumstances beyond control like war,
strike, lockouts, political unrest, transportation obstacles, governmental measures, company disruptions, damage through fire and so forth which make delivery impossible or excessively dif-
ficult.

5.3 The Seller also reserves the right to retract from the contract if a significant deterioration of the Purchaser s credibility has become evident and is likely to put terms of payment on risk, or if
the client has submitted dishonest financial statements

5.4 Cancellations of already ordered goods are possible in general for goods which are marked as fast selling products stock type in our pricelist. Goods which are not these stock types or
special or customised goods can only be cancelled upon consultation with the Seller and upon a written confirmation from the Seller. The Seller reserves the right to charge any cost which have
already occurred for the production of these goods.

5.5 For the return of goods the following should apply:


a) Return of goods is only possible if the goods and packaging are in good order and unused condition for items which are wrongly delivered or has valid complains and defects. The return
of customised labelled goods is subject to our acceptance. All returns have to be sent carriage free the Sellers office address.
b) Only goods which are marked as fast selling products stock type (please see Sellers latest price list) can be returned. For checking and restocking a charge of 15% of the net value of
the goods will be made to the purchaser
c) Goods which are not fast selling products stock type and which have been sourced order-related by the Seller can only be returned on the Sellers written agreement and are subject to
the agreed reimbursement with the Purchaser prior to returns.
d) Goods which have been produced on the Purchaser special request can not be returned

6 Term of delivery, delay and non contractual service


6.1 Indicated and confirmed terms of delivery on the Sellers part are only approximate. Delivery shall be understood to be correct and in time, if it is complied with within 2 weeks after the date
of the readiness for shipment has been announced.

6.2 For delay of dispatch caused by 5 section 1 and 2, term of delivery are extended accordingly.
49

6.3 The right of the Purchaser to demand restitution of damage for delay of delivery or non contractual or deficient service incurred by the Seller is conditioned that it is caused by:
a) irresponsible negligence of non essential contractual obligation as well as
b) wilful and grossly irresponsible neglect of contractual duties by simple service personal.
In these cases liabilities are due for each week of delay for an overall delay restitution of 1% of the corresponding order value limited to a total restitution of 5% of the value of delivery.
The Purchaser party has no right to further claims due to delays. The Seller of this agreement reserves the right to prove that delay of shipment has caused none or less harm to the mer-
chandise than claimed by the ordering party. Obligation for restitution remains limited to contractually typical and plausibly foreseeable damage.

6.4 Any delay in acceptance of the merchandise of the ordering party, as well as neglect of other obligations of participation makes it in the right of the Seller to demand restitution of damage,
including possible additional costs. This applies equally to coincidental loss of merchandise or coincidental worsening of sales, counting from the date of delay of acceptance of the ordering
party.

7 Transfer of Risks

7.1 The risk of damage or loss or deterioration of goods is transferred to the transport agent as soon as the merchandise has been handed over to the transport agent, or whoever signs respon-
sible for transportation of the merchandise, be it an individual person or an institution.

7.2 For the transfer it is indifferent, if the Purchaser delays reception of the merchandise. If shipment is delayed due to circumstances the Purchaser is answerable for, the Purchaser bears the
risk, starting the day of readiness of order has been announced.

8 Warranty of defects
8.1 The Seller of these standard terms assumes responsibility for any defect of manufacturing of the merchandise and shall be entitled to remedy or substitute the delivered product. The Seller
is not answerable for claims for additional transportation-, material-, work costs due to an increase of costs caused by the request of the Purchaser to deliver the merchandise to another place
than the previously agreed for the original shipment, unless the relocation of the delivery of the merchandise responds to a specific purpose.

8.2 If subsequent fulfilment of the replacement order fails, the Purchaser is principally entitled to demand a reduction of payment or to retract from the contract. This does not apply to minor
contractual contradictions or defects, which do not release the Purchaser from contractual obligations.

8.3 The Purchaser is obliged to notify any defect within of 4 days in writing, otherwise no demands of guarantee can be put forth. For compliance with legal terms the timely mailing of the noti-
fication suffices. The Purchaser bears the full weight of documentation and to prove in particular all alleged defects and conditions of request, the time the defect has been detected and timely
submission of defect complaint.

8.4 Remuneration of damage remains limited to the difference between price of purchase and value of defective good. Further claims of the ordering party are excluded. Therefore the imposer
of these standards does not sign responsible for any damage on the object of delivery itself. The imposer of these standard terms shall not be liable for any profit or property losses suffered by
the ordering party. This does not apply if the imposer of these standards has incurred in malicious contractual violation.

8.5 The statutory warranty period amounts to one year after dispatch of merchandise: in case of used goods the prescription is one year from dispatch of merchandise. This does not apply if
the purchaser has not notified defects on time. Statutory warranty periods also refer to the instalments of products on construction sites.

8.6 Valid characteristics of merchandise are principally only those which are included in the product description of the manufacturer. Public declarations, commercials or announcements of the
manufacturer do not represent contractual valid notification about the characteristics of the product.

8.7 If the Purchaser receives a defective or incorrect instruction manual the Seller is only obliged to deliver a complete and correct instruction manual under the condition, that the error of the
instruction manual contradicts a correct instalment.

8.8 Legal manufacturing guarantees in judicial terms are not subject to this contract and do not form part of the present document

8.9 The Seller of this agreement is released from any liability for damaged goods caused by non observation of operating and maintenance instructions or if modifications have been performed
on the merchandise, parts replaced or spare parts used, which do not comply with original standard specifications.

9 Limits of liability
9.1 No warranty is extended for minor, non-essential negligence of contractual duties. This applies equally to minor negligence of the Sellers legal representatives or auxiliary personal.

9.2 These previously described limitation of liability shall not apply to demands of the Purchaser for assured product warranty. Liability is incurred for personal injuries or loss of life of the
purchaser.

9.3 Demands for remedy of damage for defective merchandise on part of the Purchaser prescribe after the period of one year since dispatch of goods. This does not apply if the seller has
incurred in gross violation or is responsible for personal injuries or loss of life of the Purchaser.

10 Reservation of ownership

10.1 Any merchandise delivered under the business relationship with the Purchaser shall remain the property of the Seller until full payment of all outstanding amounts has taken place.

10.2 The Purchaser is responsible for correct handling of the merchandise. Additional cost for regular maintenance and inspection are responsibility of the Purchaser.

10.3 If any distress or execution shall be levied by third parties, or in case of destruction of the product, the Purchaser shall be obliged to report it without delay in writing. Change of property
rights of the Purchaser to any third party are to be transmitted without delay in writing to the Seller of these terms.

11 Compensations and retention rights


11.1 Compensation of the Purchaser only applies if demands have been legally recognised and accepted by the Seller

11.2 Retention rights can only be exercised in case of contractual equivalent demands

12 Changes and additions


Changes and additions of the contract of delivery require the Sellers written consent for any legal effect.

13 Final provisions / Severability clause


If individual provisions of these standard sales, delivery and payment terms shall be invalid or become ineffective as a whole or in part, including general business conditions, the validity of
the remaining provisions shall not be affected in any respect. Provisions which are partially or entirely ineffective shall be replaced by regulations, whose economic success is as close to the
ineffective ones as possible.

14 Place of fulfilment / Place of jurisdiction


14.1 This Agreement shall be governed and construed according to the law of the Federal Republic of Germany. Validity of the UN sale of goods laws agreements shall be excluded.

14.2 For legal controversies legal venue shall be Bonn, Federal Republic of Germany. The same applies in case even if the Purchaser has no general jurisdiction in Germany or the business
location and place of residence of the Purchaser are unknown at the moment legal complaint.
50

NOTES
Contact
Contact
AFE Airfilter Europe GmbH
Lueddigstr. 8 AFE Airfilter Europe GmbH
D - 53332 Bornheim Lueddigstr. 8
D - 53332 Bornheim
Tel. + 49 2227 900 1000
Tel. + 49 2227 900 1000
Fax + 49 2227 900 1001
Fax + 49 2227 900 1001
office@airfilter-europe.com office@airfilter-europe.com

www.airfilter-europe.com www.airfilter-europe.com
www.airfilterengineering.com
www.airfilterengineering.com
01/ 2016

You might also like