Professional Documents
Culture Documents
COMMERCIAL/
PRODUCT INFORMATION United States RESIDENTIAL
1 PRODUCT NAME
STYROFOAM UTILITYFIT XPS 15 PSI
Extruded Polystyrene Insulation
2 Manufacturer 4 Technical Data PHYSICAL/CHEMICAL
PROPERTIES
Dow Building Solutions APPLICABLE STANDARDS STYROFOAM UTILITYFIT XPS 15
200 Larkin STYROFOAM UTILITYFIT XPS 15 PSI insulation exhibits the properties
Midland, MI 48674 PSI insulation meets ASTM C578 and characteristics indicated in
1-866-583-BLUE (2583) Type X Standard Specification for Table 1 when tested as represented.
Fax 1-989-832-1465 Rigid Cellular Polystyrene Prolonged exposure to ultraviolet
www.dowstyrofoam.com/architect Insulation. Applicable standards radiation may cause the surface of
www.insulateyourhome.com include: STYROFOAM UTILITYFIT XPS 15 PSI
C518 Standard Test Method for insulation to become faded and
3 Product Steady-State Thermal Transmission
Properties by Means of the Heat
dusty. A light-colored, opaque
protective covering should be
Description Flow Meter Apparatus used if excessive solar exposure
D1621 Standard Test Method for is expected. The surface degradation
BASIC USE Compressive Properties of Rigid will have no measurable effect on
STYROFOAM UTILITYFIT XPS 15 Cellular Plastics the insulating value of the plastic
PSI extruded polystyrene insulation C272 Standard Test Method for foam unless the deterioration is
is a versatile, utility-grade product Water Absorption of Core allowed to continue until actual
manufactured for applications that Materials for Structural Sandwich foam thickness is lost. Since the dust
require a high R-value* and outstanding Constructions would impair the performance of
moisture resistance without the need E96 Standard Test Methods for adhesives and finishes, the dusty
for high compressive strength. Water Vapor Transmission of surface should be brushed off
STYROFOAM UTILITYFIT XPS 15 PSI Materials before these products are applied.
insulation is designed for use when a D696 Standard Test Method for For chemical resistance properties
PRODUCT INFORMATION
TA B L E 1 TA B L E 2
Physical Properties of STYROFOAM UTILITYFIT XPS 15 PSI Insulation Chemical Resistance(1) of STYROFOAM
Property and Test Method Value UTILITYFIT XPS 15 PSI Insulation
Acid, inorganic, weak Excellent
Thermal Resistance, per inch, ASTM C518 @ 75F mean temp.,
ft2hF/Btu, R-value(1), min. 5.0 Acid, inorganic, strong Excellent
Compressive Strength(2), ASTM D1621, psi, min. 15 Acid, organic, weak Excellent
Water Absorption, ASTM C272, % by volume, max. 0.3 Acid, organic, strong Good
Maximum Use Temperature, F 165 Bases Excellent
Coefficient of Linear Thermal Expansion, ASTM D696, in/inF 3.5 x 10-5 Alcohols, including Excellent
isopropyl alcohol
(1) Values are consistent with the criteria of ASTM C578 and the FTC R-value rule (16 CFR Part 460). R means resistance to
heat flow. The higher the R-value, the greater the insulating power.
Methyl ethyl ketone Not recommended
(2) Vertical compressive strength is measured at 10 percent deformation or yield, whichever occurs first. Since STYROFOAM Polyglycols, including Excellent
extruded polystyrene insulations are visco-elastic materials, adequate design safety factors should be used to prevent long-
term creep and fatigue deformation. For static loads, 3:1 is suggested. For dynamic loads, 5:1 is suggested. Contact Dow for propylene glycol
design recommendations.
Hydrocarbons Not recommended
Salts Excellent
5 Installation 8 Maintenance
Insecticides
Kerosene
Not recommended
Poor
Mineral oil USP Excellent
Boards of STYROFOAM UTILITYFIT
Not applicable.
Naphtha (VMP) Not recommended
XPS 15 PSI insulation are easy to
Turpentine Not recommended
handle, cut and install. Contact a
local Dow representative or access
the literature library at
9 Technical Services Beer
Gasoline
Good
Not recommended
www.dowstyrofoam.com/architect or Dow can provide technical informa- Fruit juices Good
www.insulateyourhome.com for tion to help address questions when
more specific instructions. using STYROFOAM UTILITYFIT (1) Explanation of ratings:
Excellent = The plastic was unaffected for the duration
XPS 15 PSI insulation. Technical of the test.
Good = A very slight clouding or discoloration of the
6 Availability
personnel are available to assist with
any insulation project. For technical
assistance, call 1-866-583-BLUE (2583).
plastic.
Poor = Considerable changes in plastic during exposure.
Not recommended = Severe attack of the plastic.
Became soft and unusable after a few hours of exposure.
STYROFOAM UTILITYFIT XPS 15 NOTE: This table should be used as a guide only. For design
PSI insulation is manufactured in
10
purposes, specific test data on the intended application may
several locations across North Filing Systems be needed.
7 Warranty
Not applicable.
IN THE U.S.:
For Technical Information: 1-866-583-BLUE (2583)
For Sales Information: 1-800-232-2436
THE DOW CHEMICAL COMPANY
Dow Building Solutions 200 Larkin Midland, MI 48674 www.dowstyrofoam.com/architect or www.insulateyourhome.com
NOTICE: No freedom from any patent owned by Dow or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer
is responsible for determining whether products and the information in this document are appropriate for Customers use and for ensuring that Customers workplace and disposal practices are in compliance
with applicable laws and other government enactments. Dow assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
COMBUSTIBLE: Protect from high heat sources. Local building codes may require a protective or thermal barrier. For more information, consult MSDS, call Dow at 1-866-583-BLUE (2583) or contact your
local building inspector. In an emergency, call 1-989-636-4400.
Building and/or construction practices unrelated to building materials could greatly affect moisture and the potential for mold formation. No material supplier including Dow can give assurance that mold
will not develop in any specific system.
Printed in U.S.A. Trademark of The Dow Chemical Company Form No. 179-07944X-0307P&M
(Dow) or an affiliated company of Dow McKAY196061
Habitat for Humanity is a registered service mark owned by Habitat for Humanity International