Professional Documents
Culture Documents
In 13 Clicks, without touching the KEY BOARD you can generate the
Beam Layout which is 80 % ready
Beam LS which are 90 % ready
On the File Menu Select Import Data from This dialog box comes up
STAAD ANL File
CLICK 6 :- Select a Level of which the
Beam Details are required
CLICK 4 :- Select a STAAD Output File CLICK 7 :- Click on Extract Data Button
CLICK 5 :- Click on Open Button
CLICK 10 :- Click on
OK Button
Once the grid data is given the Reinforcement Page looks like this
If the design is done in STAAD the reinforcement will be populated in the above screen
automatically,
To give reinforcement Click on Open Reinforcement Data Sheet
Button
Give
appropriate
reinforcement
data based on
your design
Each row is
separated with
a different color
alternately for
clarity.
Once the data is given in the above XLS sheet, please save the XLS Click on
sheet and close Excel program only.
The given data will be loaded into the program and will be displayed
on the Reinforcement page of the program.
That is all required for most of the users to generate the drawings, (for further fine tuning
of output please read other help manuals)
Once the Reinforcement data is given, the user can generate Beam Layout and
Beam L.S automatically at click of a button.
Such warnings occur due to the reason that there is NO straight bar running through the
length of the beam in top or bottom.
You can choose to ignore the warning to generate the drawings or go back to
reinforcement data sheet to correct the errors.
In less than 5 minutes time the program generates Beam Layout and Beam L.S
drawings along with the BOQ etc.