Professional Documents
Culture Documents
F400 [SIEMENS]
F500PLUS
Table Size mm(in) 1,200500 (47.219.7)
Max.Load Capacity kg(lb) 800 (1,764)
Spindle Taper - BBT40
Spindle RPM r/min 8,000 [10,000] [12,000]
Spindle Output kW(HP) 15 (20) [18.5 (25)] [18.5 (25)]
No. of Tools EA 30
Travel (X/Y/Z) mm(in) 1,060/510/635 (41.7/20.1/25)
Rapid Traverse Rate m/min(ipm) 36/36/30 (1,417/1,417/1,260)
F500/50 [SIEMENS]
F650PLUS
Table Size mm(in) 1,600650 (6325.6)
Max.Load Capacity kg(lb) 1,300 (2,866)
Spindle Taper - BBT40
Spindle RPM r/min 8,000 [10,000]
Spindle Output kW(HP) 15 (20) [18.5 (25)]
No. of Tools EA 30
Travel (X/Y/Z) mm(in) 1,400/660/635 (55.1/26/25)
Rapid Traverse Rate m/min(ipm) 36/36/30 (1,417/1,417/1,260)
F650/50 [SIEMENS]
F400/500/650
High accuracy headstock features a high precision angular contact bearing
High power, high torque headstock for efficiency and precision in cutting
Latest Servo ATC implementation for the quickest tool change
Fast feed rates through the 4 Way Y-axis (F650PLUS, F650/50)
Roller Guide Way for high accuracy cutting (F500/50, F650/50)
L
atest SIEMENS 828D controls with wide range of supporting software
(OPTION : F400, F500/50, F650/50)
01
F400/500/650
F400 Basic Features
High Speed & Productivity Vertical Machining Center
01
Direct Spindle
The directly coupled spindle at a max rev of 12,000rpm, allows high speed
machining. Additionally, the large diameter and the thickness of the spindle
add stability to the machine.
02
Double Anchored Ballscrew
In order to eliminate thermal growth and increase accuracy, all
axis are driven by high precision double anchored ballscrews.
The pretensioned and double anchored design provides
outstanding positioning and repeatability with virtually no
thermal growth.
03
Table & Machining Area
Table Size (X/Y axis) : 1,000/460 mm (39.3/18.1)
460
(18.1)
635
(25)
150
600 kg (1,323 lb) 460
(18.1)
(5.9)
MACHINE TOOL
HYUNDAI WIA
01
F400/500/650
800/460/520 mm (31.5/18.1/20.4)
02
03
04
+
05
[SIEMENS]
02
F400/500/650
F500PLUS Basic Features
High Speed & Productivity Vertical Machining Center
02
Double Anchored Ballscrew
In order to eliminate thermal growth and increase accuracy, all
axis are driven by high precision double anchored ballscrews.
The pretensioned and double anchored design provides
outstanding positioning and repeatability with virtually no
thermal growth.
01
03
Table & Machining Area
Table Size (X/Y axis) : 1,200/500 mm (47.2/19.6)
500
(19.6)
635
(25)
150
800 kg (1,764 lb) 500
(19.6)
(5.9)
70 1060 (41.7) 70
(2.7) (2.7)
Basic Features
MACHINE TOOL
HYUNDAI WIA
Solid Body High Column
High column of 150mm(5.9") and 300mm(11.8") is provided.
F400/500/650
02
F500 Plus :1,060/510/635 mm (41.7/20/25)
F500/50 : 1,100/510/635 mm (43.3/20/25)
03
06
+
07
01
[SIEMENS]
03
F400/500/650
F650PLUS Basic Features
High Speed & Productivity Vertical Machining Center
01 4 WAY Y-axis
The 4 slide ways on Y-axis eliminate overhang and increase
accuracy throughout the full extent of travel.
02 03
Double Anchored Ball Screw
In order to eliminate thermal growth and increase accuracy, all
axis are driven by high precision double anchored ballscrews.
The pretensioned and double anchored design provides
outstanding positioning and repeatability with virtually no
thermal growth.
04
Table & Machining Area
Table Size (X/Y axis) : 1,600/650 mm (63/25.6)
650
(25.6)
635
(25)
150
1,300 kg (2,866 lb) 650
(25.6)
(5.9)
MACHINE TOOL
HYUNDAI WIA
Solid Body High Column
High column of 300mm(11.8") is provided.
F400/500/650
T
ravel (X/Y/Z axis) :
1,400/660/635 mm (55.1/25.9/25)
04
08
+
03 09
02
01
Spindle Torque (Max./Cont.) F650PLUS : 286/143 [117.6/95.3] N.m (211/105.5 [86.7/70.3] lbf.ft)
F650/50 : 358/179 [294/196] N.m (264/132 [216.8/97.4] lbf.ft)
04
F400/500/650
F400 Spindle
Long Lasting High Accuracy & Excellent Performance
Vertical Machining Center
Spindle Cooling
The spindle cooling system minimizes thermal displacement which can happen
during lengthy machining operations, and offers continued accuracy based
on the thermal stability.
Axial Movement is Important for Face Contact
The Big Plus spindle system (BBT40) provides dual contact Clamping
between the spindle face and the flange face of the tool
holder.This greatly increases tool rigidity, reduces run out and
adds significant productivity to machining applications. Non Contact Contact
The increase in standard diameter improves rigidity and ATC interactive precision, and Z-axis displacement
revention further extends tool life.
Spindle
MACHINE TOOL
HYUNDAI WIA
F400 (8,000rpm : Belt, Direct) F400 (8,000 rpm : Belt)
Power (kW[HP]) Torque (Nm[lbfft]) Power (kW[HP]) Torque (Nm[lbfft])
13.5kW[18.1HP] (30min)
15kW[20HP] (30min) 16
15 [21.4]
9kW[12HP] (Cont.)
F400/500/650
63Nm[46.5lbfft] (Cont.)
63
[46.5]
63Nm[46.5lbfft] (Cont.)
63
[46.5]
63Nm[46.5lbfft] (Cont.)
63
[46.5]
Main Spindle
F500/650PLUS applies belt driven spindle which generates less noise and is
convenient for maintenance.
Also, F500 PLUS provides direct drive spindle as an option which has
maximum speed of 12,000rpm. It is designed with highly precise angular ball
bearings where the spindle is directly connected with the motor to reduce
acc/deceleration time.
Spindle Cooling
The spindle cooling system minimizes thermal displacement which can happen
during lengthy machining operations and accurate machining is possible based
on thermal stability.
MACHINE TOOL
F500/650 Plus (8,000 rpm Belt) F500/650 Plus (10,000 rpm Belt)
HYUNDAI WIA
Power (kW[HP]) Torque (Nm[lbfft]) Power (kW[HP]) Torque (Nm[lbfft])
15kW[20HP] (30min)
15[20] 18.5kW[24.8HP] (30min)
18.5 117.6Nm[86.7lbfft] (30min)
[24.8]
286Nm[211lbfft] (30min) 117.6
11kW[14.7HP] (Cont.) 286 15kW[20HP] (Cont.) [86.7]
15[20]
11[14.7] [211] 95.3Nm[70.3lbfft] (Cont.)
95.3
F400/500/650
18[13.3]
9[6.6]
F500 Plus (12,000 rpm Direct) F500/50, F650/50 (6,000 rpm Belt)
Power (kW[HP]) Torque (Nm[lbfft]) Power (kW[HP]) Torque (Nm[lbfft])
358Nm[264lbfft] (30min)
358 12
18.5kW[24.8HP] (S3 25%) [264] +
18.5 179Nm[132lbfft] (Cont.)
[24.8] 117.7Nm[86.8lbfft] (S3 25%) 179 13
117.6 15kW[20HP] (30min)
15kW[20HP] (S3 60%) [86.7] 15[20] [132]
15[20]
95.5Nm[70.4lbfft] (S3 60%) 11kW[14.7HP] (Cont.)
95.3 11[14.7]
11kW[14.7HP] (Cont.) [70.3]
11[14.7] 70Nm[51.6lbfft] (Cont.) 7.5
[10]
18.5kW[24.8HP] (Cont.)
F500/50, F650/50 (6,000 rpm Belt) 18.5 294N.m[216.8lbfft] (S6-40%) 294
[24.8]
[216.8]
The 1PH8 Series is a high quality performance 196N.m[144.5lbfft] (Cont.)
196
motor providing concentricity of 10 and fast [144.5]
MACHINE TOOL
HYUNDAI WIA
F400 | F500/650PLUS
Servo ATC
N
o. of Tools :
Position control of the Twin Arm ATC using Servo Motors has been
improved drastically. Also the tool changing speed has been improved, F400 : 24 [30] EA
leading to the reduction of non-cutting time.
F500/650 Plus : 30 EA
F400/500/650
F400 : BT40 [BBT40]
F500/650PLUS : BBT40
M
ax. Tool Dia. (W.T)
F400 :
F500PLUS Standard
90/150 (3.5/5.9)
Tool to Tool Time : 20% Improvement F500/650PLUS : 14
+
80/125 (3.1/4.9) 15
F500/50 | F650/50
No. of Tools : 24 [30] EA
M
ax. Tool Dia. (W.T)
110/200 (4.3/7.8)
Max. Tool Weight : 15 kg (33 lb)
T
ool Selection Method :
Random
07
F400/500/650
Machining Capability
High Performance, High Accuracy Cutting
Vertical Machining Center
Machining
MACHINE TOOL
HYUNDAI WIA
F400 F500PLUS
FACE MILL MaterialJIS:S45C(Carbon steel) FACE MILL MaterialJIS:S45C(Carbon steel)
F400/500/650
DRILL MaterialJIS:S45C(Carbon steel) DRILL MaterialJIS:S45C(Carbon steel)
Sample Workpieces
08
F400/500/650
through the HYUNDAI WIA Smart System. The user friendly software and equipment
monitoring of the Smart System maximizes productivity.
HW-MMS
g
HW
M
HW
-T
DC
S|
ng
ini
HW-TM | HW-MC
Hig
Convenien
| HW
er
ach
ce
Us
hP
Intelligent M
recisio
-WARMUP
HW-eDNC
User Friendly
n
HW-MCG
Hi
g
g
Pr
av
in
h
od S
uc
rgy
HW
tivi
ty Ene
OM
-T
|H SS
W- -E
WC HW
M
HW-MMS HW-eDNC
HYUNDAI WIA HYUNDAI WIA ethernet
Machine Monitoring System Direct Numerical Control
This software is for remote control monitoring of equipment status This software allows transmition of NC data between PC and a
(mobile, PC.) It checks and manages the state of multiple machines and machine's CNC. The processing programs can be managed on the PC
the progress of processing on a real time basis. through the ethernet or serial communication.
HYUNDAI WIA Smart System
(FANUC)
HW-MCG HW-TDC
MACHINE TOOL
HYUNDAI WIA HYUNDAI WIA Thermal
HYUNDAI WIA
Machine Guidance Displacement Compensation
Software that offers operation, maintenance, management Software that measures the changes in the external environment
monitoring and various user friendly features. as well as heat emission during processing to help reduce thermal
displacement.
HW-WARMUP HW-ESS
HYUNDAI WIA HYUNDAI WIA
F400/500/650
WARMing Up Energy Saving System
Warm-up software that measures main spindle halt and offers An environmental friendly software that reduces the unnecessarily
system warm-up time automatically. wasted standby power waiting for an operation.
(FANUC) (FANUC)
HW-TOM HW-WCM 18
+
HYUNDAI WIA HYUNDAI WIA Work 19
Tool Offset Measurement Coordinate Measurement
User friendly GUI software that indicates tool length, diameter, and User-friendly GUI software that measures work coordinates
damage (H/W excluded) (H/W excluded )
(FANUC) (FANUC)
HW-TM HW-MCS
HYUNDAI WIA HYUNDAI WIA
Tool Monitoring Machining Condition Selection
A tool monitoring software which analyzes the load of the spindle Software that automatically sets cutting and feeding parameters
motor to determine and monitor possible damage of tools. according to the machining types (speed, degree, quality)
(FANUC)
HW-AFC
HYUNDAI WIA
Adaptive Feed Control
USB Port
Convenience is increased when inputting and outputting program.
The USB port is available in addition to the former input output
Software that controls the feed automatically to maintain a certain
methods such as CF memort card and LAN.
working load to extend tool life as well as productivity.
(HW F Series, S 828D : Standard / F32i-A : Non applicable)
09
F400/500/650
SIEMENS Controller
Software for smart operating and machining
DIFFERENTIATED CAPABILITIES,
INTEGRATED ENGINEERING PERFECTLY INTERLINKED
SIEMENS 828D is a latest model CNC.
It is designed for horizontal/vertical all-purpose equipment.
MACHINE TOOL
HYUNDAI WIA
processing software that monitors speed and accuracy.
F400/500/650
Speed
20
SIEMENS Technology SIEMENS Communication +
21
Shop Mill Variable
Communication Port
Dialogue-type programming, simple and
convenient
Effective specifications for small quantity RJ 45 Ethernet
batch production
USB 2.0
Step-by-step operation possible without
knowledge of the DIN/ISO code
Compact Flash Card
3D Simulation
3D confirmation of the completed Easy input/output of a program is possible as a USB
processing configuration of the NC memory card, a CF memory card and LAN can all be used.
program is possible.
Offers standards for 2D simulation.
Possible to confirm the simulation of the
NC grogram during processing.
ISO Code
Programming
Easy Extend
Easy to install/uninstall an option
(Ex : barfeeder and chip conveyor, etc.)
If the ISO Dialect (G291) is ordered, JIS-based G-code
Possible to install in one motion without
programs can be used. (Standard)
revision of individual perimeters.
A spate list is unnecessary as option
items are indicated with letters.
10
F400/500/650
User Convenience
Various Devices for User Convenience
Laser Type
Hydraulic Device
Touch Type
Optional
MACHINE TOOL
HYUNDAI WIA
Chip Conveyor Rear (Left)
F400/500/650
Std. Coolant (Nozzle) Standard
Bed Flushing Coolant Standard
Through Spindle Coolant
Option
(20/30/70 bar [290/435/1,015 psi)
Jet Coolant Option
Gun Coolant Option
Side Oil Hole Coolant Option
Chip Conveyor
Timely and effective disposal of chips will enhance productivity as well as the
working environment.
Hinge Belt Type : Highly efficient when disposing a lot of chips. Capable of handling stringy chips.
(Long Chip)
Scraper Type : Convenient for shortly cut chips.. (Short Chip)
Drum Filter Type : Advantageous in precision, as the chips do not flow in to the coolant nozzle. (AL Chip)
Work Stocker
Specifications
Through Spindle Coolant* : Please check the filter types with sales representative.
Specifications are subject to change without notice for improvement.
Specifications
MACHINE TOOL
10,000rpm (Belt) FANUC - ETC
HYUNDAI WIA
12,000rpm (Direct) FANUC - Tool Box
Std.rpm Customized Color Need Munsel No.
Spindle Cooling System
10K, 12K - CAD & CAM Software
ATC Electric Device
24 - Call Light 1 Color :
ATC Extension
30 - Call Light 3 Color :
BT40 - Call Light & Buzzer 3 Color : B
BBT40 - Work Light
BT50 - Electric Cabinet Light
Tool Shank Type
BBT50 - Door Inter-Lock
CAT40/BCV40 - Remote MPG
F400/500/650
Spindle Load Meter
90 SIEMENS
- -
Table & Column (Built-in Type)
APC - - FANUC
Tap Type Pallet - - (Mounted Type)
Spindle Speed Meter
T-Slot Pallet SIEMENS
- -
NC Rotary Table (Built-in Type)
High Column 300mm (11.8) Work Counter Digital
Coolant System Total Counter Digital
Std. Coolant (Nozzle) Tool Counter Digital
Bed Flushing Coolant 6ea
Multi Tool Counter
20bar (290 psi) 9ea
30bar (435 psi), Electric Circuit Breaker
20(5.3 gal) AVR (Auto Voltage Regulator)
Through spindle coolant* 70bar (1,015 psi), 25kVA 24
Transformer +
15(4 gal) 30kVA - -
70bar (1,015 psi),
Flash Memory Card 25
30(7.9 gal) Auto Power Off
Top Cover Back up Module for Black out
Jet Coolant Measuring Device
Gun Coolant TACO
Air Zero
Side Oil Hole Coolant SMC
Air Gun Work Measuring Device
Cutting Air Blow TLM Touch
Tool Measuring Air Blow (Only for TLM) (Marposs/Renishaw/Bloom) Laser
Air Blow for Automation Tool Broken Detective Device
Thru MQL Device (Without MQL) Linear Scale X/Y/Z Axis
Coolant Chiller Coolant Level Sensor (Only for Chip Conveyor)
Power Coolant System (For Automation) Environment
Chip Disposal Air Conditioner
Coolant Tank 350(92.5 gal) Dehumidifier
Chip Conveyor Hinge Left(Rear) Oil Mist Collector
(Tank Position/Chip Disposal) Scraper Left(Left) Oil Skimmer (Only for Chip Conveyor)
Special Chip Conveyor (Drum Filter) MQL (Minimal Quantity Lubrication)
Standard Fixture & Automation
(180[47.5 gal]) Std.
Auto Door
Swing High Speed
(200[52.8 gal]) Auto Shutter (Only for Automatic System)
Chip Wagon Large Swing Sub O/P
(290[76.6 gal]) Single
NC Rotary TableI/F
Large Size Channel
(330[87.2 gal]) 1Axis
Control of Additional Axis
Customized 2Axis
Safety Device External M Code 4ea
Total Splash Guard Automation Interface
S/W 16Contact
I/O Extension (In & Out)
Machine Guidance (HW-MCG) : FANUC 32Contact
Tool Monitoring (HW-TM) : FANUC Hyd. Device
DNC Software (HW-eDNC) 40bar (580 psi) /
-
Spindle Heat Distortion Compensation (HW-TDC) 15(4 gal)
Spindle Warm up Function (HW-WARMUP) Std. Hyd. Unit 70bar (1,015 psi)
Energy Saving System (HW-ESS) : FANUC 100bar (1,450 psi)
Machine Monitoring System (HW-MMS) Customized
Tool Offset Measurement (HW-TOM) : FANUC
Through Spindle Coolant* : Please check the filter types with sales representative.
Specifications are subject to change without notice for improvement.
Specifications
Through Spindle Coolant* : Please check the filter types with sales representative.
Specifications are subject to change without notice for improvement.
Specifications
F400
MACHINE TOOL
HYUNDAI WIA
548 (21.6)
(2.4)
60
LEFT SIDE
CHIP CONVEYOR
2833 (111.5)
1950 (76.8)
F400/500/650
618
(24.3)
1200 (47.2)
1197 (47.1)
(2.4)
37860
(14.9)
(8.1)
205
LEFT SIDE
REAR
CHIP CONVEYOR LEFT SIDE
CHIP CONVEYOR CHIP CONVEYOR
2833 (111.5)
2498 (98.3)
(61.4)
2287 (90)
1900 (74.8)
1900 (74.8)
ON
(76.8)
618
19501560
(24.3)
1200 (47.2)
1200 (47.2)
1200 (47.2)
(13.4)
340
6 (113.2)
(11.9)
302
8.1)
205
1950 (76.8)
1950 (76.8)
618
(24.3)
1200 (47.2)
Specifications
) 2450 (96.5) 90 (3.5)
F500PLUS
60
LEFT SIDE
CHIP CONVEYOR
REAR LEFT SIDE
CHIP CONVEYOR CHIP CONVEYOR
2833 (111.5)
1560 (61.4)
2498 (98.3)
1900 (74.8)
1900 (74.8)
2287 (90)
ON
1950 (76.8)
618
1200 (47.2)
(24.3)
1200 (47.2)
1200 (47.2)
(13.4)
340
340 613 2800
(13.4) (24.1)
1263 (49.7)1134 (44.6) 1860 (110.2)
(73.2)
(105.1) 4063 (160)
2994 (117.9) 918(36.1) 280
(11)
(20.6)
523
302
(8.1)
2110 (83.1)
2055 (80.9)
(15.2)
386
(17.3)(74.8)
1145 (45.1)
440
(13.8) 1900
1200 (47.2)
1200 (47.2)
350
428 120 1314 (51.7) 905 (35.6) 1689 (66.5) 906 (35.6)
(16.9) (4.7) 4814 (189.5)
708 (27.9) 281 1795 (70.7) 340 613 1263 (49.7)
(11.1) (13.4) (24.1)
2670 (105.1)
Please check the dimension with sales representative when applying 12K spindle.
0 (108.7)
1 (102.8)
5 (70.7)
2670 (105.1)
428
(16.9)
340
(13.4)
2055 (80.9)
120
(4.7)
613
(24.1)
1145 (45.1)
F650PLUS
1200 (47.2)
2833 (111.5)
Dimensions
2804 (110.4)
1200 (47.2) 2498 (98.3)
2573 (101.3) 523
1314 (51.7)
24Tool : 2611 (102.8) (20.6) 2287 (90)
30Tool : 2760 (108.7) F500 : 2800 (110.2) F500/50 : 2876 (113.2)
1200 (47.2) 1200 (47.2)
458
(18)
1263 (49.7)
415
(16.3)
905 (35.6)
REAR
708 (27.9)
1134 (44.6)
CHIP CONVEYOR
281
CHIP CONVEYOR
(11.1)
4814 (189.5)
40632994
1950
(76.8)
(160)(117.9)
1689 (66.5)
2800 (110.2)
1795 (70.7)
1860 (73.2)
2670 (105.1)
428
(16.9)
340
(13.4)
906 (35.6)
2055 (80.9)
120
(4.7)
618
613
(13.4)
(13.8) (17.3) (15.2) (24.9) (11.9) 1900 (74.8)
1145 (45.1)
2110 (83.1) 1950 (76.8)
1900 (74.8) 205
2840 (111.8)(8.1)
1314 (51.7)
1263
+
HYUNDAI WIA
29
ON
F400/500/650
918(36.1)
28(49.7)
LEFT SIDE
90
(1
28
CHIP CONVEYOR
Specifications
224 (8.8)
9
(3 0
.5)
55
(2 0 0
46 )
1.7)
8.1
(1
(1.7)
42.5
Basic Hole
(2.1)
52.8
(4.9)
125
460 (18.1)
(4.9)
125
(4.9)
125
F400
(1.7)
42.5
100 800 (31.5) 100
(3.9) (3.9)
1,000 (39.4)
Center 1-18
(0.8)
20
Other 4-18
905 (35.6)
32 (1.3)
30(1.2)
Detail T-Slot
58
4 8)
102 102
20 (0.8)
(4) (4)
(1
)
5
(2
32 (1.2)
432 (17)
300 (11.8)
12 (0.5)
30 (1.2)
650 (25.6)
T-SLOT DETAIL
300 (11.8)
F650/650PLUS
100 700 (27.6) 700 (27.6) 100
5
(3.9) (3.9)
1,600 (63)
Specifications
MACHINE TOOL
HYUNDAI WIA
205 (8.1)
( 95
3.7
)
18)
8 (
553 45
(21.8
)
F400/500/650
500 (19.7)
F650/650PLUS
(0.2)
5
70 1,060 (41.7) 70
(2.8) 1,200 (47.2) (2.8)
30
+
264.8 31
Center 1-18
(10.4)
(0.8)
( 110
20
Other 4-18
4.
3)
32 (1.3)
7 0
1
(0.5)
(2 0 60 .6)
12
8) 3 30(1.2)
(2
Detail T-Slot
141.3
(5.6)
(0.2)
5
(2) (3.9) (3.9) (3.9) (3.9) (2)
50 100 100 100 100 50
500 (19.7)
TAIL
F500/50
(0.2)
5
50 1,100 (43.3) 50
(2) 1,200 (47.2) (2)
Specifications
10 1 (0.04) 22.6
(0.39) (BBT40) (0.88)
M16
(0.63)
16.1
45
(1.75)
63 (2.48)
44.45
(0.59)
(0.39)
15
10
7/24
(0.19)
(0.15)
(0.11)
4
3
60 2 (0.08) P5
(BT40) 6 29
16.6 (0.65) (0.24) (1.14)
27 65.4 (2.57) 35 (1.38)
(1.06) 3
11.5(0.45) (0.11) Through Coolant
F500/50 | F650/50
45
100 (3.93)
(2.75)
69.85
(0.91)
(0.66)
23
17
7/24
60 10 (0.39) 35
3 (0.11)
(0.23)
(1.37) 1BP8
6
8 (0.315)
38 101.8 (4) 45
(1.77) 60
(1.49)
1BP8 7 (0.276)
Through coolant
16 (0.63)
Specifications
MACHINE TOOL
HYUNDAI WIA
CAT40/BCV40
19.05 (0.75) 25 25
1 (0.04) 7/24
(0.984) (0.984)
(BCV40) 5/8-11
(0.63)
(0.645) 16.1
44.5 (1.75)
45
63.5 (2.5)
16.383
F400/500/650
3.2 (0.125)
(0.19)
(0.15)
(CAT40)
(0.11)
4
3
60 P5
15.8 (0.625) 68.25 (2.687) 32.15
(1.266)
3
11.5(0.45) (0.11) Through Coolant
32
+
33
F500/50 | F650/50
CAT-50/BCV50
1.5 (0.059)
(BCV50, BIG PLUS) 37.5 35.1
(1.478) (1.383)
25.8 (1.015)
1-8UNC
45
98.4 (3.875)
(2.750)
69.8
23 (0.906)
7/24
(0.23)
60
101.8 (4.000) 45
6.2 (0.244)
8 (0.315)
1BP8 7 (0.276)
Through coolant
16 (0.63)
Specifications
Specifications [ ] : Option
ITEM F400
Specifications [ ] : Option
MACHINE TOOL
kg(lb) 800 (1,764)
HYUNDAI WIA
Table Table Change Time sec -
Change Method - -
Table Driving Method - -
Spindle Taper - BIG PLUS #40 NT #50
Spindle RPM r/min 8,000 [10,000] [12,000] 6,000 [6,000]
Spindle Power Output 15/11 (20/15) [18.5/15 (24.8/20)] 15/11 (20/15)
kW(HP)
F400/500/650
Spindle Driving Method - Belt [Belt] [Direct] Belt [Belt]
Travel (X/Y/Z) mm(in) 1,060/510/635 (41.7/20.1/25) 1,100/510/635 (43.3/20.1/25)
Distance from Table Surface to SP mm(in) 150~785 (5.9~30.9)
Specifications [ ] : Option
MACHINE TOOL
Feed Function Program Protection
HYUNDAI WIA
Feedrate Override 0 - 120% Automation Support Fun.
Rapid Traverse Override F0, 5, 25/50, 100% Actual Speed Display(Monitor)
Acceleration with jerk limitation Tool Life Management Time, Parts
Programmable acceleration Work Count Function Internal
Follow-up mode Language Function
Measuring system 1 and 2, selectable Chinese Traditional, Czech, Danish,
Separate path feed for corners and chamfers Dutch, Finnish, Hungarian, Japanese,
Two Language switchable
Travel to fixed stop Korean, Polish, Russian, Swedish,
Spindle Functions Portuguese, Turkish
Spindle Override Data Transfer
Spindle Orientation RS 232C I/F
F400/500/650
Circle via center point and end point DRF offset
Circle via interpolation point Load and save of MDI
Helical interpolation Teach-in
non-uniform rational B splines Number of levels for skip blocks 8
Advanced Surface High Speed, High Rigidity Function Simulation in 3D display
Compressor for 3-axis machining Shop Mill Interactive program
Tool Function TRACYL
Tool Radius Comp. TRANSMIT
Zero Offset (G54, G55, G56, G57 ,G58, G59) Standard 100 EA
Programmable Zero Offset
3D Tool Radius Compensation
Tool management
Display
CRT / MDI TFT 10.4 Color 36
Screen saver +
Manual Operation 37
Manual Handle/Jog Feed
Reposition
Reference Approach Ref 1, 2 Approach
Spindle Control Start, Stop, Rev, Jog, Ort.
Auto Operation
Single Block
Feed Hold
Optional Block Skip
Machine Lock
Dry Run
Simulation 2D
Diagnosis Function
Alarm display
Monitor
PLC status/LAD display
Programming Function
Part Program Storage Length 5MB
Program Name 23 digits
Subroutine Call Protection Level
Absolute/incremental Command G90 - G91
Scaling, ROT
Inch / Metric Conversion
Interactive CYCLE program
Block Search
Macro
Read / Write System Variable
BackGround Editing
Miscellaneous Functions M - Code
Lable Skip
Program Stop / End M00, M01, M02, M30
Lookahead , Jerk Limitation Feed
150 Block
& Forward Control
SIEMENS Program exe.
Maximum number of tools/cuttings 256/512
Number of levels for skip blocks 1
MACHINE TOOL
Least command increment X, Y, Z axis : 0.001mm (0.0001) Spindle speed override 50% ~ 120% (10% Unit)
HYUNDAI WIA
Inch / Metric conversion G20 / G21 Spindle orientation
Interlock Each axis / All axis Rigid tapping
Machine lock All axis Tool functions / Tool compensation
Emergency stop Tool function Max. T8 digits
Stored stroke check 1 Cutter compensation C G40~G42
Mirror Image Tool length compensation G43, G44, G49
Follow-up Tool offset pairs 64 Pair
Servo off Tool life management
+/- 0~9999 pulse Data input / Output & Editing functions
Backlash compensation
(rapid traverse & cutting feed) Reader/Puncher interface RS232C
Position switch Memory card input/output
F400/500/650
MDI operation Back ground editing
Research Function Sequence, Program Extended part program editing Copy, move, change of NC program
Program restart Extenal message
Dry run Setting, Display, Diagnosis
Single Block Self-diagnosis function
Buffer register Alarm history display Alarm & Message
Memory Card DNC operation Help function
Feed functions Run hour/Parts count display
Manual jog feed Rapid, Jog, handle Actual cutting feedrate display
Manual handle feed-rate x1, x10, x100 Graphic display
Feed command F code feedrate direct command Spindle/Servo setting screen
Feedrate override 0~200% (10% Unit) Operation monitor screen Loadmeter Light
Jog feed 0~5,000mm/min (197ipm) Selection of 5 optional language
Rapid traverse override F0, F25%, F50%, F100% LCD Screen Save Screen saver 38
Override cancel Auto Data Backup +
Rapid traverse bell-shaped acce/deceleration Manual Guide i Interactive Programming 39
Program input & Interpolation functions
Label Skip Option
Positioning/Linear/Circular Sub Axis Control
Interpolation function
(G00/G01/G02/G03) Additional work coordinate system 48 Pair / 300 Pair
Exact stop mode/Exact stop G61 / G09 Additional custom micro change #100~#199, #500~#999
Control in/out Work coordinate Command
Dwell Work coordinate Interpolation
Helical interpolation G04, 0~9999.9999sec Cylinderical interpolation
Threading/synchronous feed Single direction positioning G60
Manual reference point return FAST ethernet 100 Mbps
Reference point return Data server 1GB
Reference point return check G28 AI Contour Control II(AICC II)
2nd, Reference point return G27 Additional optional blockskip 9 ea (Application can be limited)
Program stop/end G30 Handle interupt
Tape code M00, M01 / M02, M30 Manual Handle Feed 3 unit
Optional block skip EIA / ISO (Automatic recognition) program storage length 640m (256Kbyte) ~ 5120m (2Mbyte)
Max. programmable dimensions 1 ea Dynamic graphic display
Program number +/- 9999.9999 (+/- 8digit) Protection of data at 8 levels
/Sequence number O4 / N8 digit Tool monitoring function HWTM (Embeded FANUC Type)
Absolute/incremental command
Decimal point input G90 / G91
Plane selection
Work coordinate preset G17, G18, G19
Manual absolute G52~G59
Programmable data input On fixed
Sub program call G10
Custom macro 10 Step
AI Contour Control(AICC) I
Cylinderical interpolation
Canned cycle
Optional chamfering/corner R G73, G74, G76, G80 ~ G89
Skip function
Automatic coordinate system setting G31
Coordinate system rotation
Programmable mirror image
Headquarter
Changwon Technical Center / R&D Center / Factory
153, Jeongdong-ro, Seongsan-gu, Changwon-si,
MACHINE TOOL
HYUNDAI WIA
Gyeongsangnam-do, Korea (Zip Code : 51533)
TEL : +82 55 280 9114 FAX : +82 55 282 9680