You are on page 1of 28

PERFORM

WITH
PRECISION
CHEMICAL PRODUCTS
HANDBOOK

EPOXIES,
LIQUIDS AND
POWDERS

Chemicals are important to the long-term life of


concrete. Dayton Superior has a wide variety of
TABLE OF
chemical products to help achieve success with all of CONTENTS
your concrete projects. From curing compounds for
freshly placed concrete, to complete rehabilitation
on an existing project, Dayton Superior offers the
technology to extend concrete life, lower job costs
and to provide a strong return on investment.
EPOXY PRODUCTS.........................................2
EPOXY CONSTRUCTION ADHESIVES......................................................2
EPOXY REPAIR MORTAR KITS..................................................................3
EPOXY GROUT............................................................................................3
EPOXY JOINT FILLER................................................................................3
REBAR SPRAY / EPOXY PRIMER.............................................................3
EPOXY HEALER/SEALER..........................................................................4
POLYMER FLOOR COATINGS....................................................................4
PARKING DECK COATING..........................................................................5
BRIDGE DECK OVERLAY SYSTEMS..........................................................5
LIQUID PRODUCTS..........................................9
FORM RELEASE AGENTS.........................................................................9
CURING COMPOUNDS...............................................................................9
CURE & SEAL COMPOUNDS....................................................................11
LEED / GREEN.......................................................................................... 12
LIQUID HARDENERS / DENSIFIERS...................................................... 13
BOND BREAKERS TILT-UP CONSTRUCTION.................................... 14
SPRAY ADHESIVE.................................................................................... 15
ACCELERATORS....................................................................................... 15
EVAPORATION REDUCERS..................................................................... 15
SURFACE RETARDERS............................................................................ 16
SEALERS.................................................................................................. 16
WATER REPELLENTS............................................................................... 17
LATEX BONDING AGENTS / ADMIXTURES........................................... 17
CLEANERS / STRIPPERS........................................................................ 18
POWDER PRODUCTS..................................... 18
NON SHRINK GROUTS............................................................................. 18
CEMENT BASED REPAIR MORTARS...................................................... 19
TOPPINGS / HARDENERS....................................................................... 21
SELF LEVELING FLOOR LEVELERS...................................................... 22
FLOOR PREP............................................................................................23
TOOLS AND EQUIPMENT............................... 23
INDEX.........................................................24

Perform with Precision |



01/16 1



EPOXIES
EPOXY PRODUCTS MEDIUM VISCOSITY
Sure Bond J58
EPOXY CONSTRUCTION ADHESIVES Epoxy Adhesive
ANCHORING GEL / PASTE Sure Bond J58 is a 100% solids, two component, high
modulus, medium viscosity, moisture tolerant struc-
Sure Anchor J50 tural epoxy adhesive that complies with requirements
Epoxy Gel Anchor of ASTM C-881 and AASHTO M-235.
Sure Anchor J50 is a two component, 100% solids,
moisture tolerant, high modulus epoxy gel adhesive Sure Bond J58 LPL
complying with ASTM C-881 and AASHTO M-235. Epoxy Adhesive
Sure Bond J58 LPL is a 100% solids, two component,
Sure Anchor I J51 high modulus, medium viscosity, moisture tolerant, long
Epoxy Gel Anchor open time structural epoxy adhesive complying with the
Sure Anchor I J51 is two component, moisture requirements of ASTM C-881 and AASHTO M-235.
tolerant, 100% solids, high modulus, rapid setting
epoxy gel adhesive that meets ASTM C-881 and
AASHTO M-235. NSF - 61 Approved.
All Weather J51AW
Epoxy Gel Anchor
All Weather J51 AW is a two component 100% solid,
moisture tolerant, all weather epoxy acrylate hybrid
anchoring gel complying with ASTM C 881 specifica-
tion requirements. All Weather J51 AW for application
temperatures down to -15F (-26C).
Loop Sealant J606
Flexible Epoxy Loop Sealant
Loop Sealant J606 is a two component, 100% solids, INJECTION RESIN
flexible epoxy loop sealant. It is ideal for securing wiring Sure Inject J56
and lighting fixtures in roadways and airport runways Epoxy Injection Resin
and taxiways in asphalt and concrete substrates. Sure Inject J56 is a 100% solids, high modulus, mois-
Pro-Poxy Segmental Bridge ture tolerant, low viscosity epoxy adhesive for gravity
feed or pressure injection of cracks in concrete. Sure
Adhesive Inject J56 complies with the requirements of ASTM
High Modulus, Epoxy Gel Epoxy Adhesive C-881 and AASHTO M-235.
Pro-Poxy Segmental Bridge Adhesive (SBA Epoxy)
is a two component, 100% solids, moisture-tolerant Sure Inject J56 SLV
epoxy adhesive. It bonds, seals and adheres segmen- Epoxy Injection Resin
tal precast structural bridge elements. The product Sure Inject J56 SLV is a 100% solids, high modulus,
conforms to ASTM C-881 as a Type VI. It is available moisture tolerant, very low viscosity epoxy adhesive
in three application temperature ranges, conforming for gravity feed or pressure injection of cracks in
to ASTM C-881, Classes D, E and F. concrete. Sure Inject J56 SLV complies with the
requirements of ASTM C-881 and AASHTO M-235.

2 WWW.DAYTONSUPERIOR.COM 01/16


EPOXIES
EPOXY REPAIR MORTAR KITS Poxy Chock
Epoxy Grout
Rapid Resin Repair PoxyChock is a 100% solids, VOC compliant two
Epoxy Repair Mortar Kit component high strength, pourable epoxy machine
Rapid Resin Repair is a three component, 100% sol- chock. PoxyChock is designed to replace steel
ids, low modulus, all weather, non-shrinking epoxy/ chocks for maintaining permanent alignment of
urethane hybrid concrete repair material. Rapid Resin machinery and equipment. PoxyChock exhibits
Repair utilizes 100% solids epoxy/urethane technol- excellent resistance to heavy loading, vibration
ogy with specialty graded aggregates for achieving and chemicals while providing an exceptional
rapid turn around concrete repairs in all weather degree of high strength and physical properties.
conditions. Unit consists of three parts: component PoxyChock has excellent flowability where tight
A epoxy resin, component B modified amine curing tolerances are present.
agent, and component C specially graded aggregate.
EPOXY JOINT FILLER
Sure Patch
Epoxy Repair Mortar Kit Sure Fil J52
Sure Patch is a three component, 100% solids, low Epoxy Joint Filler
modulus epoxy resin system containing specially se- Sure Fil J52 is a 100% solids, two component, low
lected aggregates. A unit consists of: component A shrink, moisture tolerant joint filler and crack repair
epoxy resin, component B modified amine curing material. Designed to fill cut joints to prevent join
agent, and component C specially graded aggregate. breakdown during load transfers.
EPOXY GROUT REBAR SPRAY / EPOXY PRIMER
Epoxy Grout J55 Rebar Spray J62
Epoxy Grout Rebar Coating
Epoxy Grout J55 is a three component system of Rebar Spray J62 is an epoxy coating packaged in
blended aggregates and pre-measured 100% solids, a ready-to-use 11 ounce spray can. Epoxy green.
very low exotherm epoxy resin. Place up to a maxi-
EPOXY / CEMENT BASED BONDING AGENT /
mum of 8 inches (20.3 cm) deep in a single pour re-
REBAR PRIMER
sulting in a 95% bearing area when properly installed
Perma Prime 3C
Epoxy Primer
Perma Prime 3C is a water based, three component,
epoxy modified cementitious bonding agent and cor-
rosion inhibitor.

Perform with Precision |



01/16 3



EPOXIES
EPOXY HEALER/SEALER Spec Cote 100 CR
High Build, Chemical Resistant Epoxy Coating
Sure Seal HMWM Spec Cote 100 CR is a 96% solids, two-component
High Molecular Weight Methacrylate Healer/Sealer Novolac Epoxy offering a high degree of chemical
Sure Sealer HMWM is a three component high mo- and abrasion resistance to protect and seal con-
lecular weight methacrylate, 100% solids, penetrating crete floors.
sealer for horizontal concrete. Sure Seal HMWMs
low viscosity formula penetrates deep into pores, Spec Cote Urethane
voids and small hairline cracks protecting the concrete Two Component, Chemical Resistant Urethane Coating
from deterioration due to migration of moisture, oils, Spec Cote Urethane is a two component aliphatic
chlorides and other contaminants that cause corrosion polyurethane coating with outstanding resistance
to reinforcing steel. to chemicals, abrasion and weather. Spec Cote
Urethane is a non-yellowing urethane coating that
Sure Seal LV/LM has excellent impact resistance, U.V. stability and
Epoxy Sealer weathering properties and can be installed indoors
Sure Seal LV/LM is a 100% solids, low modulus, highly or outdoors to deliver a smooth high-gloss finish
penetrating, epoxy polymer. Sure Seal LV/LM, when with outstanding protection.
applied to cracked concrete, seals the cracks against
the intrusion of chlorides and moisture, protecting
Spec Cote WB
High Performance Water-Based Epoxy Coating
the concrete from degradation and the corrosion of
Spec Cote WB is two component water based high
steel reinforcements. Sure Seal LV/LM is designed
performance, VOC compliant interior floor coating.
to prolong the life of concrete in even the most se-
Excellent chemical resistance and color retention
vere climates. Applications include bridge decks and
with a high gloss finish, designed for durability and
elevated slabs.
ease-of-application. Spec Cote WB combination
POLYMER FLOOR COATINGS safety, ease of use and performance provides an
alternative to solvent based products. Spec Cote
Spec Cote 100 WB presents state-of-the-art technology in concrete
100% Solids, High Build Coating floor care systems.
Spec Cote 100 is a 100% solids, two-component epoxy
coating used to protect and seal concrete floors, steel and
other compatible materials for interior applications. Spec
Cote 100 can be mixed with various aggregates for use as
a trowel grade epoxy mortar or as a base for broadcasting
silica/quartz aggregates for a decorative or non-skid floor.
Spec Cote 100 Clear
100% Solids, Clear, High Build Coating
Spec Cote 100 Clear is a 100% solids, two-component
water clear epoxy coating used to protect and seal
concrete floors, steel and other compatible materials
for interior applications. Spec Cote 100 Clear can be
mixed with various aggregates for use as a trowel grade
epoxy mortar or as a base for broadcasting silica/quartz
aggregates for a decorative or nonskid floor.

4 WWW.DAYTONSUPERIOR.COM 01/16


EPOXIES
PARKING DECK COATING BRIDGE DECK OVERLAY SYSTEMS
Sure Seal Traffic Deck Coating Pro-Poxy Type III DOT
A 100 % solids blend of high strength epoxy - urethane The Unitex Pro-Poxy Type III DOT Bridge Deck Over-
polymers combined with specialty blended aggregates lay is a long-lasting solution in extending the life of
to produce a long lasting, non-skid durable parking new and existing concrete bridge decks by creating
deck surface. a highly durable surface, reducing deterioration rates
caused by high traffic and heavy freight loads result-
ing in decreased maintenance costs over the life of
the bridge deck.
A bridge deck overlay application consists of two coats
of an advanced polymer epoxy that quickly develops
a high tensile strength to seal, protect and extend
the life of bridge decks in both new and restoration
construction. This economical and highly effective
method blends an epoxy binder that is applied evenly
to the bridge deck surface. Aggregate is immediately
applied over the binder, increasing the texture depth
of the pavement and providing a long-lasting seal to
protect the bridge deck from the effects of traffic and
harsh weather conditions. In addition, the bridge deck
overlay provides increased pavement grip in wet and
dry conditions resulting in fewer accidents and more
saved lives.

TRAINING
SERVICES
BUILD ON OUR
KNOWLEDGE
Our training is a powerful, cost-
effective way to stay current with
products, technology, safety and
trends in the concrete construction
industry. Our industry professionals
share their expertise through:

Engaging Presentations
Hands-on Practice
Classes and Webinars
Demonstrations
AIA continuing education.

Contact us for upcoming courses Perform with Precision


or to schedule on-site training:
888-977-9600.

Perform with Precision |



01/16 5



EPOXIES
The Bridge Deck Overlay Protection Advantage
Improves the pavement condition by creating a highly
durable surface that is flexible and waterproof.
Extends deck life and serviceability vs. costly
replacement.
Significantly lighter than typical concrete overlays
which require a thicker application.
Allows for better support of high traffic volumes and
heavy freight loads, reducing the deterioration rate.
The durability and reduced deterioration results
in decreased maintenance costs over the life of
the bridge deck.
Produces a surface that is resistant to chemicals
that can often cause corrosion on the bridge deck
surface, such as fuel, de-icer and motor oil.
Primer-less system.
The Bridge Deck Overlay Safety Advantage*
Reduces stopping distance, hydroplaning risk and
provides higher skid resistance. At 60 MPH (on
wet or dry pavement), bridge overlay can reduce
stopping distances up to 40%. According to the
FHWA, 70% of wet pavement crashes can be
affected by friction improvements.
Only low cost, active protection solution suggested
by the FHWA not dependent on driver response.
Low cost, bridge overlay is classified by the
FHWA as a low cost safety solution that qualifies
for 100% safety funding under highway safety
improvement programs.
The Preferred DOT Solution
State DOTs across the U.S. turn to Dayton Supe-
rior for epoxy product solutions used for bridge
overlay applications.
Unitex by Dayton Superior was among the first to ap-
ply advanced polymer technologies to develop a high
tensile strength epoxy binder for skid-resistant bridge
deck overlays. Unlike rigid epoxies, Pro-Poxy Type III
DOT was engineered to offer flexibility to expand and
contract with the concrete in all weather conditions * Source: Using High Friction Surface Treatments To Improve Safety
on Bridge Overlays and elevated slabs. At Horizontal Curves (published July 2012). The Texas Transportation
Institute of The Texas A&M University System. According to The Texas
The high tensile strength and low modulus, low Transportation Institute, if the site experienced an average of 1 crash per
year prior to application and that average is reduced by even 20% after
viscosity properties of ProPoxy Type III DOT have application, the HFST remains a cost-effective solution in crash reduction.
made it the bonding product solution of choice for high The Texas Transportation Institute utilized the economic values of crash
scenarios set forth by an FHWA study that found the average cost of all
friction aggregates used in bridge overlay applications classifications of fatal and injury crashes is estimated at $158,177. However,
across the country. the cost of one fatal crash is considered to be more than $4 million.

6 WWW.DAYTONSUPERIOR.COM 01/16


EPOXIES
How to specify Dayton Superior Pro-Poxy Type III
DOT
Part 2 - Products
2.01 Manufacturer
A. Pro-Poxy Type III DOT, as manufactured by Dayton
Superior, 3101 Gardner Ave, Kansas City, MO
64120, 800-821-5846
2.02 Materials
A. Epoxy resin adhesive binder:
1. Epoxy resin system shall be a 100% solids,
epoxy urethane curing system.
2. The ratio of Component A: Component B
shall be 1:1 by volume.
2.03 Performance Criteria
A. Epoxy Binder Characteristics
PROPERTY REQUIREMENTS TEST METHOD
Mix Ratio 1:1 by volume
Viscosity 15-25 poises ASTM D2556, RV3 @ 20 RPM
Gel time 15-45 min. ASTM C881
Compressive strength Min. 1,000 psi (6.9 MPa) @ 3 hrs ASTM C579
Min. 5,000 psi (34.4 MPa) @ 24 hrs.
Tensile strength (neat) 2,500 - 5,000 psi (17.2 - 34.4 MPa) ASTM D638
Tensile Elongation (neat) 30-70% ASTM D638
Adhesive strength 250 psi (1.7 MPa) or 100% concrete failure ACI 503R / ASTM C1583
Permeability to chloride ion Maximum of 100 coulombs at 28 days AASHTO T277
Absorption Maximum of 1% at 24 hrs. ASTM D570
Shore D Hardness 65-80
Thermal compatibility No delamination of overlay ASTM C884
Note: Values are based on specimens or samples cured or aged and tested at 75F (24C).

In addition to Bridge Deck Overlay applications, ProPoxy Type III DOT Epoxy is
typically used for:
Horizontal Curves Elevated Walkways Hospital Entrances
Intersections On-ramps Bike Lanes
Parking Areas High Occupancy Lanes Bus Lanes
Rural Roadways School Zones Pedestrian Walkways
Industrial Sites Toll Authority Entrances

Perform with Precision |



01/16 7



EPOXIES

Bridge Deck Overlay and Pro-Poxy Type III DOT


Case Studies
KANSAS Wichita I-135 Flyover Resurfacing 14.4 lane miles
(100,000 square yards)
The use of Pro-Poxy Type III DOT in the 2.4 mile resurfacing
of the I-135 flyerover north of Wichita allowed for a significant
savings of time and labor compared to similar projects using
other methods.
Future Protection the new bridge deck overlay creates a seal
nearly impervious to harsh weather conditions and chemicals
such as de-icers ultimately extending the life of the I-135 Flyover
and reducing maintenance costs.
LOUISIANA Morganza Floodway Elevated Bridge Deck,
US 190 East
Largest and Most Complex Project in US with the project
covering over 18,778 linear feet this was the largest project in
the United States to Date.
Extended Bridge Life Over 200,000 square yards of bridge
deck was covered with the Pro-Poxy Type III DOT Overlay
system extending the life of the 67 year old bridge deck and
saving government funds from having to replace 3.5 millions of
elevated bridge.
Safer Surface more than 78,000 gallons of epoxy and
2,500,000 pounds of high friction aggregate were used to install
the two-layer system that protected the bridge deck and created
a safer high friction surface for vehicles.
NEW MEXICO Rio Grande Bridge Deck, Interstate 40, Route 21
Bridge overlay was applied on five traffic lanes and two
emergency lanes on each side of the bridge deck.
Using bridge overlay allowed for limited lane closures to
accommodate the bridge decks high traffic volumes.
The project set a new world record for bridge overlay installation
with 14,000 square yards of bridge overlay applied in one
working session.
UTAH Replacement of 55 Bridges
Bridge overlay was used on 55 new bridge decks, totaling
approximately 1.1 million square feet.
Unitex built a mechanical pump system, specifically to apply the
bridge overlay for this project.
Pro-Poxy III DOT met the Utah Department of Transportations
specifications due to the ability to withstand extreme weather
conditions, thermal cycles, snow plow use and heavy traffic.

8 WWW.DAYTONSUPERIOR.COM 01/16


LIQUIDS
LIQUID PRODUCTS Magic Kote
Form Release
FORM RELEASE AGENTS Magic Kote is a low V.O.C., ready-to-use, petroleum
OIL BASED based, chemically neutral, diesel free concrete form
release. Magic Kote is water insoluble and contains
Clean Strip J1A no waxes. Magic Kote effectively prevents bonding
Form Release of concrete to forms and formliners. Regular use of
Clean Strip J1A is a low V.O.C., ready-to-use, pe- Magic Kote will increase the life of all forms.
troleum based, chemically reactive concrete form
release that effectively prevents bonding of concrete Also available - Magic Kote 100. VOC < 100 g/l.
to forms and formliners. Special note: Available in Meets SCAQMD, OTC, LADCO & CARB.
a Winter Grade - cold weather formula to increase WATER BASED
sprayability and application rates. Clean Strip J1EF
Clean Strip J2 Earth Friendly Form Release
Form Release Clean Strip J1EF is an economical low
Clean Strip J2 is a ready-to-use, petroleum based, V.O.C., concrete form release agent. Clean Strip J1EF
chemically reactive liquid concrete form release agent. works to ensure clean, positive release on plywood, fi-
Clean Strip J2 effectively prevents bonding of con- berglass, aluminum, steel, urethane and other concrete
crete to forms and formliners. Regular use of Clean forming materials and form liners. This product acts as
Strip J2 will increase the life of all forms. Special a barrier to the adhesion of concrete while minimizing
note: Available in a Winter Grade - cold weather for- surface dusting. Properly applied, Clean Strip J1EF
mula to increase sprayability and application rates. will not stain concrete or interfere with the adhesion
of coatings. Clean Strip J1EF is compliant with all US
Clean Strip Ultra J3 VOC regulations for Concrete Form Release agents in-
Form Release cluding Federal EPA, OTC, LADCO, SCAQMD & CARB.
Clean Strip Ultra J3 is a premium, low odor, readyto-
use, low V.O.C. chemically reactive form release ideal CURING COMPOUNDS
for architectural and precast concrete and for general RESIN BASED
forming applications. Clean Strip Ultra J3 works to
ensure clean, positive release of plywood, fiberglass, White Resin Cure J10W
aluminum, steel and other concrete forming materials. Concrete Curing Compound
Clean Strip Ultra J3 prolongs the life of plywood forms, A water-based, resin, liquid membrane forming curing
and reduces rusting of steel forms. Clean Strip Ultra compound for freshly finished concrete. White Resin
J3 is non-staining, reduces the number of surface air Cure J10W is white pigmented to reflect the heat of
voids (bugholes) and will not interfere with the adhe- the sun. Complies with ASTM C-309.
sion of subsequent coatings. Clear Cure VOC J7WB
Clean Strip J100 VOC Concrete Curing Compound
Clear Cure VOC J7WB is a VOC compliant, water based
Form Release
Clean Strip J100 VOC is a V.O.C. compliant in all areas clear resin dissipating curing compound. It contains
of the U.S., ready-to-use, petroleum based, chemically <100 g/L VOCs making it compliant in all areas of the
reactive concrete form release that effectively prevents United States & Canada. Clear Cure VOC J7WB may
bonding of concrete to forms and formliners. Regular contribute to LEED credits. It provides excellent curing
use will increase the life of all forms. Formulated for properties for newly placed concrete and is easier to
less than100 g/l environmental regulations. Complies remove than most curing membranes. Complies with
with SCAQMD, OTC, LADCO & CARB requirements. ASTM C-309.

Perform with Precision |



01/16 9



LIQUIDS

Suggestions for form releases


include, but are not limited to:
Forms need to be clean and dry before application.
Rust and dirt will transfer to the concrete surface.
All new non-coated plywood should be treated
with a lime-water solution prior to its first use in
forming. This solution will neutralize the naturally
occurring wood sugars in the plywood surface.
Apply form releases only during dry weather.
Apply with low pressure spray using a wide angle,
low flow, flat fan-type spray nozzle.
All new wood forms require a heavy application
of form release prior to their first use. This
application should be heavy enough to saturate
the wood forms. Multiple coats of form release
Form Release is Field-Proven
Alcoa Concrete Construction steadily poured
are often necessary to accomplish this saturation,
over 1,500 foundations in the Philadephia
and we recommend waiting at least 5 to 6 hours
tri-state area each year with their SteelPly
between coats.
forms. With more than 100 years of com-
On smooth, dense form surfaces, like steel or
bined experience, owners Duarte, Frank and
aluminum, the best performance will be achieved
Armando Alexender know that form release
by spraying the form release uniformly and wiping
not only affects the finish of the wall, but the
down the form surfaces with a clean soft cloth.
life of the forming systems they own.
Do not over-apply. Over-application can result in
concrete dusting, bug holes and other surface Duarte Alexender stated, We base our form
defects. release purchases on two criteria: we need
Do not apply petroleum-based form releases to a release that provides us with a clean strip
polystyrene form surfaces. and suitable finish, plus we want to minimize
Avoid over spraying onto reinforced steel it may buildup and maximize the lifespan of our
act as a bondbreaker on reinforcing steel. forming equipment.
After trying a variety of form releases, Alcoa
Concrete Construction decided that they like
the results they get from using Magic Kote on
jobs utilizing the Steel-Ply. Duarte reports,
With Magic Kote, we can achieve success
with both criteria.

10 WWW.DAYTONSUPERIOR.COM 01/16


LIQUIDS
Clear Resin Cure J11W CURE & SEAL COMPOUNDS
Concrete Curing Compound
SOLVENT BASED
Clear Resin Cure J11W is an all resin, dissipating water-
based curing compound. Complies with ASTM C-309. Cure & Seal LV 25% J20UV
Solvent Based Cure & Seal
Resin Cure with Dye J11WD Cure & Seal LV 25% J20UV is an acrylic copolymer
Concrete Curing Compound cure, seal and dust-proofing compound in an aromatic
Resin Cure with Dye J11WD is an all resin, dissipating solvent containing 25% solids. Designed for ease of
water-based curing compound containing a fugitive application and better atomization when spraying in
dye. Complies with ASTM C-309. a wide temperature range from 35F to 90F (2C
WAX BASED to 32C). Cure & Seal LV 25% J20UV is ultraviolet
City White Cure J8 stable and resists yellowing. The higher acrylic sol-
ids content forms an excellent surface coating with
Concrete Curing Compound
a high gloss finish that provides an outstanding cure
City White Cure J8 is an economical, V.O.C. com-
performance. Complies with ASTM C-1315.
pliant, water-based, white pigmented concrete
curing compound. Cure & Seal 25% J22UV
White Wax Cure J9A Solvent Based Cure & Seal
Cure & Seal 25% J22UV is an acrylic copolymer
Concrete Curing Compound
cure, seal and dust-proofing compound in an aromatic
A water-based, wax, liquid membrane forming curing
solvent containing 25% solids with special U.V. sta-
compound for freshly finished concrete. White Wax
bilizers. The higher acrylic solids content will form
Cure J9A is white pigmented to reflect the heat of
an excellent surface coating with a high gloss finish
the sun. Complies with ASTM C-309.
and will provide an outstanding cure performance.
White Wax Cure CRD300 Cure & Seal 25% J22UV is ultraviolet light stable
Concrete Curing Compound and resists yellowing. Complies with ASTM C-1315.
A high solids, white pigmented, water based wax
concrete curing compound formulated to retain
Cure & Seal 30% J23UV
Solvent Based Cure & Seal
moisture in freshly finished concrete. The selected
Cure & Seal 30% J23UV is an 30% solids acrylic
white pigments reflect the hear of the sun, keeping the
copolymer cure, seal and dust-proofing compound in
concrete surface cooler. White Wax Cure CRD300 is
an aromatic solvent containing special U.V. stabilizers.
a membrane forming wax based material that seals
The higher acrylic solids content will form an excel-
the necessary moisture for proper cement hydration.
lent surface coating with a high gloss finish and will
Complies with ASTM C-309.
provide an outstanding cure performance. Complies
with ASTM C-1315.
WATER BASED
Cure & Seal 309 J18
Water Based Cure & Seal
Cure & Seal 309 J18 is a water based acrylic copo-
lymer that offers a combination curing, sealing and
dust-proofing for freshly finished concrete surfaces.
This product dries to produce a non-yellowing, du-
rable, clear film on concrete. Formulated for interior
applications. Non-flammable and free of noxious
fumes. Complies with ASTM C-309.

Perform with Precision |



01/16 11



LIQUIDS
Cure & Seal 1315 J22WB What Does Earth Friendly (EF) Mean?
Water Based Cure & Seal
VOC < 100 g/l
Cure & Seal 1315 J22WB is a water based acrylic
Meets SCAQMD, OTC, LADCO
copolymer containing 25% solids that offers out- & CARB. May contribute
standing curing, sealing and dust-proofing for freshly towards LEED Credits
finished concrete surfaces. The high solids content Unique to Market
will form a long lasting surface membrane with a Investment in improved
high gloss finish that will provide excellent cure per- chemistries and technologies
formance. Provides a non-yellowing, durable, clear High Performance
film on concrete. Formulated for interior applica- Contractor Embraced
tions. Non-flammable and free of noxious fumes. Designer Trusted
Complies with ASTM C-1315.
EF Technology Products Can Con-
WATER BASED/EARTH FRIENDLY tribute Toward the Following LEED
Cure & Seal 309 EF Credits:
Earth Friendly Cure & Seal LEED EQ Credit 3.1: Construction Worker Safety
Cure & Seal 309 EF is an Earth Friendly
LEED EQ Credit 4.2: Low-Emitting Materials
(EF) non-yellowing acrylic copolymer curing and
sealing compound that may contribute to LEED LEED MR Credit 6: Rapidly Renewable Materials
Credits. The Cure & Seal 309 EF formula is low odor LEED MR Credit 5.1: Regional Materials
and contains VOC <100 g/L, making it compliant in LEED MR Credit 5.2: Regional Materials
all areas. Cure & Seal 309 EF cures, seals and dust-
proofs freshly finished concrete surfaces. Complies LEED / GREEN
with ASTM C-309.
Clean Strip J1EF
Cure & Seal 1315 EF Earth Friendly Form Release
Earth Friendly Cure & Seal Clean Strip J1EF is an economical V.O.C.
Cure & Seal 1315 EF is an Earth Friendly compliant, concrete form release agent. Clean Strip
(EF) non-yellowing 30% solids acrylic copolymer J1EF works to ensure clean, positive release on ply-
curing and sealing compound that may contribute to wood, fiberglass, aluminum, steel, urethane and other
LEED Credits. The Cure & Seal 1315 EF formula is concrete forming materials and form liners. This
low odor and contains VOC <100 g/L, making it VOC product acts as a barrier to the adhesion of concrete
compliant in all areas. Cure & Seal 1315 EF cures, while minimizing surface dusting. Properly applied,
seals and dustproofs freshly finished concrete sur- Clean Strip J1EF will not stain concrete or interfere
faces. Complies with ASTM C-1315. with the adhesion of coatings. NSF - 61 Approved.
Clean Strip J100 VOC
Form Release
Clean Strip J100 VOC is a V.O.C. compliant, ready-to-
use, petroleum based, chemically reactive concrete
form release that effectively prevents bonding of
concrete to forms and formliners. Regular use of
Clean Strip J100 VOC will increase the life of all forms.

12 WWW.DAYTONSUPERIOR.COM 01/16


LIQUIDS
Cure & Seal 1315 EF
Earth Friendly Cure & Seal
Cure & Seal 1315 EF is an Earth Friendly
(EF) non-yellowing 30% solids acrylic copolymer
curing and sealing compound that may contribute to
LEED Credits. The Cure & Seal 1315 EF formula is
low odor and contains VOC <100 g/L, making it VOC
compliant in all areas. Cure & Seal 1315 EF cures,
seals and dustproofs freshly finished concrete sur-
faces. Complies with ASTM C-1315.
Cure & Seal 309 EF
Earth Friendly Cure & Seal
Cure & Seal 309 EF is an Earth Friendly
(EF) non-yellowing acrylic copolymer curing and
sealing compound that may contribute to LEED
Credits. The Cure & Seal 309 EF formula is low odor Densifier J13
and contains VOC < 100 g/L, making it compliant in Liquid Densifier for Concrete
all areas. Cure & Seal 309 EF cures, seals and dust- Densifier J13 is a ready-to-use, water based so-
proofs freshly finished concrete surfaces. Complies lution of sodium orthosilicate that reacts with the
with ASTM C-309. free lime in the concrete to provide a chemically
hardened surface. NSF - 61 Approved.
Ultra Seal EF
Earth Friendly Concrete Sealer Pentra-Hard Densifier
Ultra Seal EF is an Earth Friendly (EF) Lithium Concrete Hardener for Concrete
acrylic, non-yellowing concrete sealer that may con- Pentra-Hard Densifier is advanced lithium chemis-
tribute to LEED Credits. The Ultra Seal EF formula is try that hardens and dust-proofs new and existing
low odor and contains VOC < 100 g/L, making it VOC concrete. This easy-to-use water-based solution
compliant in all areas. The Ultra Seal EF is designed requires no rinsing and is VOC compliant in all areas of
to seal, protect and add an attractive gloss to exist- the world. When sprayed on new or existing concrete,
ing concrete and decorative concrete surfaces. Ultra it penetrates into the concrete, where it reacts with
Seal EF is blush resistant and has good resistance free calcium to form insoluble calcium silica hydrate,
to common chemicals such as motor oil, antifreeze, which makes concrete more water, stain, and abra-
vinegar and bleach. sion resistant for easier maintenance and longer life.
It is also suitable for concrete polishing procedures
LIQUID HARDENERS / DENSIFIERS and helps prolong the life of polished finishes.
Densifier Concentrate J12
Liquid Densifier for Concrete
A concentrate solution of sodium orthosilicate with a
fugitive dye. Mix with water for an economical con-
crete hardener and dust-proofing compound.

Perform with Precision |



01/16 13



LIQUIDS
Pentra-Hard Guard Pentra-Hard EDH
High Performance Finish, Stain and Wear Protector Anti-Scale / Freeze-Thaw Shield
Pentra-Hard Guard is a high performance finish that Surface Densifier, Hardener and Salt Screen Pen-
adds shine, stain resistance and abrasion resistance to tra Hard EDH is a clear, penetrating, breathable,
concrete. Effective on all concrete and cement contain- surface-applied liquid that strengthens, protects and
ing floors, this water-based, lithium-fortified material hardens concrete surfaces. Pentra Hard EDH an-
cures quickly to form a clear, extremely hard, micro- tiscale treatment helps protect concrete sidewalks,
coating that protects the substrate, even in demanding driveways and other concrete surfaces from freeze/
industrial and commercial environments. This new thaw damage caused by moisture saturation within
chemistry makes concrete surfaces more attractive and the pore structure of substrates. Scaling begins with
easier to maintain, and eliminates the need for waxes, the first freeze-thaw cycle and will continue through
polishes, and acrylics. Best results and coverage will successive winter seasons resulting in repeated loss
be obtained by densifying the surface with Pentra-Hard of the concrete surface, eventually leading to spalling,
Densifier before applying PentraHard Guard. pop-outs and ultimately failure if left untreated.
Pentra-Hard Finish Sure Hard Densifier J17
High Gloss Stain and Finish Liquid Densifier for Concrete
Pentra-Hard Finish is a patented, high-gloss, stain and Sure Hard Densifier J17 is a water based, colorless,
wear resistant finish for improving the sheen, hard- odorless solution of specialized reactive chemicals
ness and chemical resistance of conventional concrete, that penetrate concrete surfaces to seal, densify and
hardened concrete and/or cement based floors. This harden the freshly placed or existing concrete. Sure
water-based, lithium fortified (chemical polish) quickly Hard Densifier J17 is V.O.C. compliant in every area
dries to a clear, extremely hard, micro-coating that te- of the country and environmentally safe to use.
naciously bonds and reacts with the substrate forming
an insoluble bond with the surface. Formulated using BOND BREAKERS TILT-UP CONSTRUCTION
Nano-Lithium reactive silicon hybrid polymer technol- SOLVENT BASED
ogy for extreme gloss, rapid shine development and
excellent wear properties, this novel treatment eliminates
Sure Lift with Dye J6D
Bond Breaker
the need for floor waxes, liquid polishes and conventional
Sure Lift with Dye J6D is a reactive and membrane
resin based coatings. Best results and coverage will be
forming bond breaker for use in tilt wall construc-
obtained by densifying the surface with Pentra-Hard
tion. Sure Lift with Dye J6D is a special formula
Densifier before applying Pentra-Hard Finish.
of polymers and propriety ingredients designed to
provide clean, easy lifting of tilt panels. Sure Lift
with Dye J6D has a fugitive dye for ease of visual
inspection during application and is also available
without the dye upon special request. Complies
with ASTM C-309 curing standard when applied to
a steel troweled concrete substrate.

14 WWW.DAYTONSUPERIOR.COM 01/16


LIQUIDS
ACCELERATORS
CSet
Accelerating Admixture
CSet is an accelerating admixture for mortar, stucco
and concrete. It quickens the hydration of cement
resulting in shorter setting times and higher early
strengths. CSet provides improved workability, helps
prevent segregation and is a substantial aid in early
stiffening for mortar and stucco mixes. It is an aque-
ous solution of organic and inorganic compounds that
produces a rapid heat development of the mortar that
helps to protect it from freezing during its early life
at low temperatures. V.O.C. compliant.
QSet
Non Chloride, Non-Corrosive, Accelerating Admixture
QSet is a non-corrosive accelerating admixture
HIGH STRENGTH, FAST DRYING WATER BASED which contains no calcium chloride. It quickens
Sure Lift J6WB the hydration of cement resulting in shorter setting
Water-Based Bond Breaker times and high early strength. QSet provides im-
Sure Lift J6WB is a liquid, V.O.C. compliant, waterbased, proved workability, helps decrease segregation and
reactive and membrane forming bond breaker for use in is a substantial aid in early stiffening for mortar and
tilt wall construction. Sure Lift J6WB is a special formula stucco mixes. It is an aqueous solution of organic
of polymers and propriety ingredients designed to provide and inorganic compounds that produces a rapid
clean, easy lifting of tilt panel. Complies with ASTM C-309 heat development of the mortar that protects it from
curing standard when applied to a steel troweled concrete freezing during its early life at low temperatures.
substrate. Approved for use in all 50 states and Canada. V.O.C. compliant.
Maxi Tilt with Dye EVAPORATION REDUCERS
Water-Based Bond Breaker
Maxi Tilt with Dye is a V.O.C. compliant, waterbased, AquaFilm Concentrate J74
reactive and membrane forming bond breaker for use Evaporation Retardant
in tilt wall construction. Maxi Tilt with Dye is a special AquaFilm Concentrate J74 is a proprietary emulsion
formula of polymers and propriety ingredients designed of unique organic compounds designed to minimize
to provide clean, easy lifting of tilt panels. Maxi Tilt with moisture loss from fresh concrete. AquaFilm Con-
Dye has a fugitive dye for ease of visual inspection centrate J74 is economical as a concentrate and is
during application. Complies with ASTM C-309 cur- diluted with potable water at a 9 to 1 ratio. As a water
ing standard when applied to a steel troweled concrete based polymer, AquaFilm Concentrate J74 is V.O.C.
substrate. Approved for use in all 50 states and Canada. compliant and contains a blue fugitive dye for ease
of visual inspection during application.
SPRAY ADHESIVE
GluDown Adhesive
Construction Adhesive
A spray adhesive designed for bonding
most construction related materials.

Perform with Precision |



01/16 15



LIQUIDS
AquaFilm J74RTU SEALERS
Evaporation Retardant
SOLVENT BASED
AquaFilm J74RTU is a ready-to-use proprietary
emulsion of unique organic compounds designed to AggreGloss J25
minimize moisture loss from freshly placed concrete. Concrete Sealer
As a water based polymer, AquaFilm J74RTU is AggreGloss J25 is a UV stable, non-yellowing formu-
V.O.C. compliant and contains a yellow fugitive dye. lation of 25% solids methacrylate copolymers in an
aromatic solvent. AggreGloss J25 forms a tenacious
bond to the concrete surface and provides a long
lasting protective high gloss film. Ideal for decorative
concrete applications.
AggreGloss Satin J25S
Concrete Sealer
AggreGloss Satin J25S is a UV stable, non-yellowing
formulation of 25% solids methacrylate copolymers in
an aromatic solvent. AggreGloss Satin J25S forms a
tenacious bond to the concrete surface and provides
a long lasting, low gloss, protective satin film.
Anti Spall J33
Concrete Sealer
A uniform blend of mineral spirits and boiled linseed
oil used for protecting exterior concrete. Anti Spall
J33 has a light amber color.
Tuf Seal J35
SURFACE RETARDERS Concrete Sealer
Tuf Seal J35 is a clear, nonyellowing sealer comprised
Top Cast of methyl methacrylate polymers. Tuf Seal develops
Surface Retarder a durable, high gloss finish that not only protects, but
Top Cast is a water-based, top-surface retarder also beautifies concrete floors. Tuf Seal J35 provides
formulated to produce beautiful exposed aggregate resistance to oils, grease and gasoline. Protects con-
substrates. It is available in 11 depths of etch, each one crete from excessive outdoor weathering conditions.
color and number coded for safety and convenience.
No plastic protection or covering required to achieve
quality results.
Face-Off
Surface Protectant
Face-Off is an innovative surface protectant de-
signed to keep splatter, color, cementitious toppings,
cures and retarder overspray from adhering to the
surfaces surrounding a concrete placing and finish-
ing operation.

16 WWW.DAYTONSUPERIOR.COM 01/16


LIQUIDS
SOLVENT BASED
Weather Worker 40% J29
Water Repellent
Weather Worker 40% J29 is a proprietary 40% silane
that penetrates into concrete or masonry and provid-
ing long term weatherproofing protection.
Weather Worker 100% J29A
Water Repellent
Weather Worker 100% J29A is a proprietary 100%
silane that penetrates into concrete or masonry and
provides long term weatherproofing protection.
Tuf Seal Satin J35S
Concrete Sealer ANTI-SLIP ADDITIVE
Tuf Seal Satin J35S is a scientifically formulated clear, Grip Aid
non-yellowing sealer comprised of methyl methacry- Anti Slip Additive
late polymers. It dries to a durable, satin finish that Grip Aid is a very fine anti-slip powder that adds
not only protects, but also beautifies floors. Tuf Seal texture to most clear or colored sealers.
Satin J35S provides resistance to most oil and gas
solutions. Protects concrete from excessive outdoor LATEX BONDING AGENTS / ADMIXTURES
weathering conditions.
Acrylic Bonding Agent J40
WATER BASED / EARTH FRIENDLY Bonding Agent
Ultra Seal EF A ready-to-use, non-reemulsifiable acrylic admixture
Earth Friendly Concrete Sealer and bonding agent designed to improve the adhesion
Ultra Seal EF is an Earth Friendly (EF) acrylic, non- and durability of concrete, masonry, terrazzo and
yellowing concrete sealer that may contribute to portland cement-sand mixes to horizontal and vertical
LEED Credits. It is low odor and contains VOC < concrete and other surfaces.
100 g/L, it is VOC compliant in all areas. Designed
to seal, protect and add an attractive gloss to exist-
PVA Bonding Agent J41
Bonding Agent
ing concrete and decorative concrete surfaces, Ultra
PVA Bonding Agent J41 is a concentrated reemulsifi-
Seal EF is blush resistant and has good resistance
able/rewettable polyvinyl acetate (PVA) emulsion for
to common chemicals such as motor oil, antifreeze,
use as a bonding agent for application on concrete,
vinegar and bleach.
cement board or masonry prior to installing patches,
WATER REPELLENTS mortars, stucco and plaster.
WATER BASED Level Primer J42RTU
Weather Worker 10% J26WB Bonding Agent
Water Repellent Level Primer J42RTU is a ready-to-use re-emulsifiable
Weather Worker 10% J26WB is a water based primer designed to be used with Levelayer, Econolevel
emulsion of siloxane that penetrates into concrete and Level Topping self leveling underlayments.
or masonry to provide long term weatherproofing Level Primer J42
protection. Bonding Agent
Level Primer J42 is a concentrated re-emulsifiable
primer designed to be used with the Levelayer, Econo-
level and Level Topping self leveling underlayments.

Perform with Precision |



01/16 17



LIQUIDS / POWDERS
CLEANERS / STRIPPERS POWDER PRODUCTS
Citrus Cleaner J48 NON SHRINK GROUTS
Concrete Cleaner and Stripper
Citrus Cleaner J48 is a heavy duty concrete stripper CEMENT BASED
and degreaser used for general cleaning and removal 1107 Advantage Grout
of curing compounds from concrete floors. Cement Based Grout
1107 Advantage Grout is a non-shrink, non-corrosive,
Green Bean Clean non-metallic cementitious grout. 1107 Advantage
Concrete Cleaner and Stripper Grout is designed to provide a controlled, positive
Green Bean Clean is an industrial strength bio-based expansion to ensure an excellent bearing area. 1107
gel stripper made from renewable resources. Advantage Grout can be mixed from a fluid to a stiff
Dissolve It plastic consistency.
Concrete Remover Dri Pak Precast Grout
A chemically active liquid formulated to remove Cement Based Grout
concrete buildup from concrete forms, tools, mixers, Dri Pak Precast Grout is a non-shrink, non-corrosive,
hardware, shoring, ready-mix trucks, aluminum forms non-metallic cementitious grout. Dri Pak Precast
and post-tension rods. DissolveIt is a viable option Grout is designed to provide a controlled, positive
to the damaging effects of sandblasting, chipping or expansion to ensure an excellent bearing area.
hammering concrete from equipment. DriPak Precast Grout can be mixed from a stiff to a
flowable consistency.
Sure-Grip High Performance Grout
Cement Based Grout
Sure-Grip High Performance Grout is a non-shrink,
non-corrosive, non-metallic cementitious grout de-
signed to provide a controlled, positive expansion and
to ensure an excellent bearing area. Sure-Grip High
Performance Grout can be mixed in a flowable and
fluid consistency.
Sure-Grip Precision Grout
Cement Based Grout
Sure-Grip Precision Grout is a non-shrink, noncor-
rosive, non-metallic cementitious grout. Sure-Grip
Precision Grout is designed to provide a controlled,
positive expansion to ensure an excellent bearing
area and can be mixed from a fluid to a stiff plastic
consistency. Sure-Grip Precision Grout does not
utilize or produce gaseous expansion for height
change characteristics.

18 WWW.DAYTONSUPERIOR.COM 01/16


POWDERS
Turbo Grout HP12
Cement Based Grout
Turbo Grout HP 12 is a non-shrink, non-corrosive,
non-metallic cementitious grout. Turbo Grout HP
12 is designed to provide a controlled, positive
expansion to ensure an excellent bearing area
and can be mixed from a plastic consistency
to a flowable consistency. Turbo Grout HP 12
develops 12,000 -14,000 psi (82.7 - 96.6 MPa)
in 28 days.

Sleeve-Lock Grout
Non-Shrink Grout
Sleeve-Lock Grout is a specially formulated cement
based, non-metallic , non-shrink grout designed for the
grouting of the Dayton Superior D410 SleeveLock
Grout Sleeve.

CEMENT BASED REPAIR MORTARS


HORIZONTAL, VERTICAL AND OVERHEAD
Polyfast FS
Repair Mortar
Turbo Grout LT12 Polyfast FS is a is shrinkage compensated, high
strength mortar containing portland cement, special
Cement Based Grout
Turbo Grout LT 12 is a non-shrink, non-corrosive, polymers and additives to provide an outstanding
non-metallic cementitious grout. Turbo Grout LT 12 strength gain along with a fast set. Polyfast FS is a
is designed for use in cooler temperatures to provide single component trowelable material formulated for
faster set times and quicker strength gain than normal vertical, overhead and horizontal repairs.
cement based non-shrink grouts. Turbo Grout LT 12 Recrete 5 Minute
develops 12,000 psi in 28 days even at temperaturesRepair Mortar
as low as 35F. Recrete 5 Minute is a general purpose cement based
Underwater Grout concrete repair and patching material. Recrete 5
Minute is specially formulated to provide a very fast
Cement Based Grout
A non-shrink cementitious grout designed to resist setting repair mortar with excellent workability. Rec-
wash-out in underwater or tidal zone grouting rete 5 Minute can be used for repair and patching of
applications. Underwater Grout is a specific blend vertical, overhead and horizontal areas subject to light
of Portland Cement, specially graded aggregates traffic both interior and exterior.
and admixtures to impart controlled expansion and
exceptional cohesiveness for maximum flowability
and strength.

Perform with Precision |



01/16 19



POWDERS
Pave Patch 3000
Horizontal Repair Mortar
Pave Patch 3000 is a fast setting, cement based,
heavy duty, single component concrete repair mate-
rial requiring only the addition of water. Pave Patch
3000 develops high early strength gain and meets the
demanding requirements of most US Departments of
Transportation specifications.
Special Patch
Horizontal Repair Mortar
Special Patch is a two component polymer-modified,
cementitious, concrete repair mortar for use in thin
and thick section concrete patching and overlays.
Special Patch is ideal for repairing interior warehouse
slabs or exterior concrete pavements.

Recrete 20 Minute Thin Resurfacer


Repair Mortar Horizontal Repair Mortar
Recrete 20 Minute is a general purpose cement based Thin Resurfacer is a multi-purpose single component
concrete repair and patching material. Recrete 20 repair and resurfacing product designed for use inside
Minute is specially formulated to provide a fast setting or outside in thicknesses ranging from feather edge
repair mortar with excellent workability. Recrete 20 up to inch (1.3cm). A polymer modified cement
Minute can be used for repair and patching of vertical, based material that can be placed with a trowel and
overhead and horizontal areas subject to light traffic requires only the addition of water, Thin Resurfacer
both interior and exterior. sets faster than normal concrete and will accept foot
traffic in approximately 67 hours.
Recrete Light 20 Minute VERTICAL / OVERHEAD
Repair Mortar
Recrete Light 20 Minute is a general purpose cement Architectural Finish
based concrete repair and patching material that Rubbing and Sacking Repair Mortar
dries to a light gray color. It is specially formulated Architectural Finish is a single component, cement
to provide a fast setting repair mortar with excellent based material specially formulated for rubbing,
workability. Recrete Light 20 Minute can be used for smoothing, repairing and restoring vertical or over-
repair and patching of vertical, overhead and horizon- head concrete surfaces.
tal areas subject to light interior and exterior traffic. Civil/Structural VO
HORIZONTAL Vertical/Overhead Repair Mortar
HD 50 Civil/Structural VO is a cement based mortar designed
Horizontal Repair Mortar for structural repairs of vertical or overhead concrete
HD 50 is a fast setting, cement based, fiber reinforced, substrates. It is enhanced with a corrosion inhibitor
latex-modified, heavy duty, single component concrete for rebar and steel protection and is especially for-
repair material requiring only the addition of water. mulated for use in spray applied applications using
HD 50 develops high early strength gain and meets wet spray process equipment. Civil/Structural VO
the demanding requirements of most US Departments has excellent finishing characteristics making it very
of Transportation specifications. user friendly to screed and finish. Due to its superb
workability, it may also be applied by trowel or hand.

20 WWW.DAYTONSUPERIOR.COM 01/16


POWDERS
Perma Patch FP
Form and Pour Extended Repair Mortar
Perma Patch FP is a specially designed patching and
structural repair mortar formulated for maintenance
and new construction projects where prolonged
working time up to 40 minutes and fast strength in
2-3 hours is required.
SPECIALTY REPAIRS
Anchor All
Anchoring Cement
A fast-setting, non-shrink anchoring cement with
controlled expansion. Pourable and fast setting, An-
chor All provides a durable high strength anchor for
interior and exterior applications.

HD 25 VO Waterstop
Hydraulic Cement Repair Mortar
Vertical/Overhead Repair Mortar
Waterstop is a non-corrosive, non-rusting, extremely
HD 25 VO is a high strength mortar containing port-
fast setting hydraulic cement compound for plugging
land cement, special polymers and accelerators to
and stopping active water leaks in concrete structures
provide an accelerated early strength gain and set
or masonry surfaces. When mixed with water to a
time. It is a single component, fiber enhanced trow-
thick consistency and hand formed into a plug, it will
elable material formulated for vertical and overhead
stop active leaks even under water.
repairs of concrete.
Perma Patch VO CEMENT BASED INDUSTRIAL
Vertical/Overhead Repair Mortar TOPPINGS / HARDENERS
Perma Patch VO is a single component, cement based,
patching and repair mortar developed for vertical and
Emery Tuff
Emery Dry-Shake Floor Hardener
overhead applications. Perma Patch VOs unique rapid
Emery Tuff is a ready-to-use shake-on floor hardener
setting, shrinkage compensating formulation offers
comprised of a blend of 100% pure emery, special ad-
excellent durability and ease of application without
ditives and portland cement. Emery Tuff is a material
the use of forms.
that is extremely hard, tough and abrasion resistant.
CEMENT BASED FORM AND POUR It will impart very long life and extremely high dura-
Civil/Structural FPX bility to concrete surfaces. Emery Tuff is completely
Form and Pour Extended Repair Mortar non corrosive and rust free and can be used inside
Single component, shrinkage compensated Portland- or outside. Emery Tuff offers a superior alternative
Cement based concrete repair material containing to metallic floor hardeners.
blended coarse aggregate. Civil/Structural FPX is
enhanced with a corrosion inhibitor for rebar and
steel protection and is designed primarily for large
volume placements including structural elements,
typically in applications from 1 inch (2.54 cm) to 12
inches (30.48 cm).

Perform with Precision |



01/16 21



POWDERS
Emery Tuff Top Flowable
Emery Floor Topping
Emery Tuff Top Flowable is a ready to use floor
topping comprised of a blend of 100% pure emery/
corundum, special additives and portland cement.
Emery is a natural, mined material that is extremely
hard, tough and abrasion resistant. It will impart
very long life and extremely high durability to con-
crete floors and surfaces and is non corrosive, rust
free and can be used indoors or out. Emery Tuff Top
Flowable Top requires only the addition of water to
produce a high slump, flowable consistency
Ferro Tuff
Metallic Dry-Shake Floor Hardener
Ferro Tuff is a ready-to-use metallic floor hard-
ener comprised of clean and well graded iron
aggregates, special additives and portland ce-
Emery Non-Slip ment. It provides greater impact resistance than
Non-Slip Emery aggregate for Floors and Pavements other types of dry shake hardeners. Ferro Tuff is
Emery Non-Slip is a non slip aggregate comprised available in a natural concrete color and in a non
of 100% pure emery. Emery is a natural occurring rusting formula.
mined material that is tough and abrasion resistant. Quartz Tuff
It will impart long life and excellent slip resistance for Non-Metallic Dry-Shake Floor Hardener
concrete surfaces. Emery Non-Slip is completely non Quartz Tuff is a ready-to-use, non metallic aggre-
corrosive and rust free, for inside and outside use. gate, dry shake floor hardener comprised of care-
Emery Tuff Top fully graded quartz aggregates, special additives and
Emery Floor Topping portland cement. Proper installation of Quartz Tuff
Emery Tuff Top is a ready-to-use floor topping com- will impart long life and high durability to interior and
prised of a blend of 100% pure emery/corundum, exterior concrete floors. Quartz Tuff is available in a
special additives and portland cement. Emery is a natural gray concrete color and light reflective.
natural, mined material that is extremely hard, tough
and abrasion resistant. It will impart very long life
and extremely high durability to concrete floors and
surfaces. Emery Tuff Top is non corrosive, rust free
and can be used indoors or out. Emery Tuff Top
requires only the addition of water to produce a low
slump, trowelable consistency.

22 WWW.DAYTONSUPERIOR.COM 01/16


POWDERS / TOOLS & EQUIPMENT
POWDERS
SELF LEVELING FLOOR LEVELERS
EconoLevel
Floor Underlayment
Econolevel is a cement based, non-shrink, self-leveling
interior floor underlayment that only requires the ad-
dition of water to produce a flowable mixture that can
be easily placed or pumped onto the floor. Econolevel
is not a gypsum based product.

FLOOR PREP
Sure Finish
Floor Underlayment
Dayton Superior Sure Finish is a trowel applied, highly
polymer modified, cement based, rapid setting under-
layment. It produces a smooth, true feather finish to
LeveLayer a wide variety of substrates, including wood, concrete,
Floor Underlayment ceramic and existing resilient flooring. Sure Finish
Dayton Superior LeveLayer is a cement based, non- can also be used indoors to repair damaged concrete
shrink, self-leveling floor underlayment designed for wall surfaces and on exterior concrete walls that are
interior use. It provides a smooth subfloor formulated to be coated.
to accept floor coverings in as little as 14 hours after
installation. LeveLayer is not a gypsum based product TOOLS AND EQUIPMENT
Level Topping Spray-Pro
Floor Topping Spray Pumps That Simply Work Every Time
Level Topping is Dayton Superiors premium cement A comprehensive solution to cost effectively apply
based, non-shrinking, self-leveling interior floor top- our Earth Friendly (EF) Family of High Performance
ping designed as a wearing surface. It only requires Chemicals.
the addition of water to produce a free flowing mixture
that can be poured or pumped. Level Topping is not
Underlayment Tools
For Underlayments, Toppings and Decorative Products
a gypsum based product.
The Flooring Materials Tool Kit consists of all the tools
Level Topping Exterior necessary to mix and install self-leveling underlayments
Floor Topping and toppings. The kit can also be used for decorative
Level Topping Exterior is a premium cement based, concrete jobs as well. Professional Flooring Installers
nonshrink, self-leveling topping designed for leveling who know the importance of having the right tools to
horizontal concrete. It only requires the addition of successfully complete the job were instrumental in
water to produce a free flowing mixture that can be designing Dayton Superiors Flooring Materials Tool Kit.
poured or pumped onto the floor. Level Topping is
not a gypsum based product

Perform with Precision |



01/16 23



INDEX
1107 ADVANTAGE GROUT.............................18 J10W.................................................................. 9 POXY CHOCK................................................... 3
ACRYLIC BONDING AGENT J40..................17 J11W.................................................................. 11 PRO-POXY SEGMENTAL BRIDGE ADHESIVE........ 2
AGGREGLOSS J25.........................................16 J11WD............................................................... 11 PRO-POXY TYPE III DOT................................ 5
AGGREGLOSS SATIN J25S..........................16 J12....................................................................13 PVA BONDING AGENT J41...........................17
ALL WEATHER J51AW.................................... 2 J13....................................................................13 Q-SET...............................................................15
ANCHOR ALL..................................................21 J17.....................................................................14 QUARTZ TUFF...............................................22
ANTI SPALL J33.............................................16 J18.................................................................... 11 RAPID RESIN REPAIR..................................... 3
AQUAFILM CONCENTRATE J74..................15 J20UV.............................................................. 11 REBAR SPRAY J62......................................... 3
AQUAFILM J74RTU........................................16 J22UV.............................................................. 11 RECRETE 5 MINUTE......................................19
ARCHITECTURAL FINISH.............................20 J22WB.............................................................12 RECRETE 20 MINUTE...................................20
CITRUS CLEANER J48..................................18 J23UV.............................................................. 11 RECRETE LIGHT 20 MINUTE......................20
CITY WHITE CURE J8.................................... 11 J25....................................................................16 RESIN CURE WITH DYE J11WD.................... 11
CIVIL/STRUCTURAL FPX..............................21 J25S.................................................................16 SBA EPOXY...................................................... 2
CIVIL/STRUCTURAL VO...............................20 J26WB.............................................................17 SEGMENTAL BRIDGE ADHESIVE................. 2
CLEAN STRIP J1A........................................... 9 J29....................................................................17 SLEEVE-LOCK GROUT..................................19
CLEAN STRIP J1EF................................... 9, 12 J29A.................................................................17 SPEC COTE 100............................................... 4
CLEAN STRIP J2............................................. 9 J33....................................................................16 SPEC COTE 100 CLEAR................................. 4
CLEAN STRIP J100 VOC.......................... 9, 12 J35....................................................................16 SPEC COTE 100 CR......................................... 4
CLEAN STRIP ULTRA J3................................ 9 J35S.................................................................17 SPEC COTE URETHANE................................ 4
CLEAR CURE VOC J7WB............................... 9 J40...................................................................17 SPEC COTE WB............................................... 4
CLEAR RESIN CURE J11W............................ 11 J41....................................................................17 SPECIAL PATCH............................................20
C-SET...............................................................15 J42...................................................................17 SPRAY-PRO....................................................23
CURE & SEAL 25% J22UV.......................... 11 J42RTU............................................................17 SURE ANCHOR I J51...................................... 2
CURE & SEAL 30% J23UV.......................... 11 J48....................................................................18 SURE ANCHOR J50........................................ 2
CURE & SEAL 309 EF.............................12, 13 J50.................................................................... 2 SURE BOND J58............................................. 2
CURE & SEAL 309 J18.................................. 11 J51..................................................................... 2 SURE BOND J58 LPL..................................... 2
CURE & SEAL 1315 EF............................12, 13 J51AW............................................................... 2 SURE FIL J52.................................................. 3
CURE & SEAL 1315 J22WB..........................12 J52..................................................................... 3 SURE FINISH.................................................23
CURE & SEAL LV 25% J20UV..................... 11 J55..................................................................... 3 SURE-GRIP HIGH PERFORMANCE GROUT.....18
DENSIFIER CONCENTRATE J12..................13 J56..................................................................... 2 SURE-GRIP PRECISION GROUT..................18
DENSIFIER J13...............................................13 J56 SLV............................................................ 2 SURE HARD DENSIFIER J17........................14
DISSOLVE IT...................................................18 J58..................................................................... 2 SURE INJECT J56........................................... 2
DRI PAK PRECAST GROUT...........................18 J58 LPL............................................................ 2 SURE INJECT J56 SLV.................................. 2
EARTH FRIENDLY..........................................12 J62..................................................................... 3 SURE LIFT J6WB...........................................15
ECONOLEVEL.................................................23 J74....................................................................15 SURE LIFT WITH DYE J6D...........................14
EMERY NON-SLIP.........................................22 J74RTU............................................................16 SURE PATCH.................................................... 3
EMERY TUFF...................................................21 J100 VOC.................................................... 9, 12 SURE SEAL DECK COATING......................... 5
EMERY TUFF TOP.........................................22 J606.................................................................. 2 SURE SEAL LV/LM.......................................... 4
EMERY TUFF TOP FLOWABLE...................22 LEVELAYER....................................................23 THIN RESURFACER......................................20
EPOXY GROUT J55......................................... 3 LEVEL PRIMER J42.......................................17 TOP CAST........................................................16
FACE-OFF........................................................16 LEVEL PRIMER J42RTU................................17 TUF SEAL J35................................................16
FERRO TUFF..................................................22 LEVEL TOPPING............................................23 TUF SEAL SATIN J35S.................................17
GLUDOWN ADHESIVE...................................15 LEVEL TOPPING EXTERIOR........................23 TURBO GROUT HP12.....................................19
GREEN BEAN CLEAN....................................18 LIQUID PRODUCTS......................................... 9 TURBO GROUT LT12......................................19
GRIP AID..........................................................17 LOOP SEALANT J606.................................... 2 TYPE III DOT..................................................... 5
HD 25 VO.........................................................21 MAGIC KOTE..................................................... 9 ULTRA SEAL EF....................................... 13, 17
HD 50..............................................................20 MAXI TILT WITH DYE.....................................15 UNDERLAYMENT TOOLS.............................23
J1A..................................................................... 9 PAVE PATCH 3000........................................20 UNDERWATER GROUT..................................19
J1EF............................................................. 9, 12 PENTRA-HARD DENSIFIER..........................13 WATERSTOP....................................................21
J2....................................................................... 9 PENTRA-HARD EDH......................................14 WEATHER WORKER 10% J26WB................17
J3....................................................................... 9 PENTRA-HARD FINISH.................................14 WEATHER WORKER 40% J29.....................17
J6D...................................................................14 PENTRA-HARD GUARD................................14 WEATHER WORKER 100% J29A.................17
J6WB................................................................15 PERMA PATCH FP..........................................21 WHITE RESIN CURE J10W............................. 9
J7WB................................................................. 9 PERMA PATCH VO..........................................21 WHITE WAX CURE CRD300......................... 11
J8...................................................................... 11 PERMA PRIME 3C........................................... 3 WHITE WAX CURE J9A................................. 11
J9A................................................................... 11 POLYFAST FS.................................................19

24 WWW.DAYTONSUPERIOR.COM 01/16
INNOVATION
CENTER
REAL-WORLD SOLUTIONS
INSPIRED BY YOUR VISION
Your vision is to take concrete construction to new heights.
We turn that vision into real-world solutions through
precision research and development, testing and technology.

Together we are redefining what is possible in the


concrete construction industry. Our Innovation Center
is comprised of:

A state of the art chemical lab


A full-featured mechanical test facility
Product demonstration areas
Contemporary training and meeting areas

Bring us your ideas and we will deliver your solution.

Call today: 888-977-9600 Perform with Precision


1125 Byers Road
Miamisburg, OH 45342
937-866-0711
888-977-9600

PERFORM
WITH
PRECISION

DS16
01/16
Copyright 2016 Dayton Superior Corporation, All Rights Reserved.

You might also like